Refine
Year of publication
Document Type
- Preprint (651)
- Article (355)
- diplomthesis (1)
Has Fulltext
- yes (1007)
Is part of the Bibliography
- no (1007)
Keywords
- Heavy Ion Experiments (20)
- Hadron-Hadron scattering (experiments) (11)
- Hadron-Hadron Scattering (9)
- LHC (9)
- Heavy-ion collision (6)
- ALICE experiment (4)
- Quark-Gluon Plasma (4)
- ALICE (3)
- Collective Flow (3)
- Heavy Ions (3)
Institute
- Physik (1002)
- Frankfurt Institute for Advanced Studies (FIAS) (932)
- Informatik (898)
- Informatik und Mathematik (3)
- Geowissenschaften (2)
- Hochschulrechenzentrum (2)
- Medizin (2)
- Mathematik (1)
In the present work, three different techniques are used to separate ice-nucleating particles (INP) and ice particle residuals (IPR) from non-ice-active particles: the Ice Selective Inlet (ISI) and the Ice Counterflow Virtual Impactor (Ice-CVI), which sample ice particles from mixed phase clouds and allow for the analysis of the residuals, as well as the combination of the Fast Ice Nucleus Chamber (FINCH) and the Ice Nuclei Pumped Virtual Impactor (IN-PCVI), which provides ice-activating conditions to aerosol particles and extracts the activated ones for analysis. The collected particles were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis to determine their size, chemical composition and mixing state. Samples were taken during January/February 2013 at the High Alpine Research Station Jungfraujoch. All INP/IPR-separating techniques had considerable abundances (median 20–70%) of contamination artifacts (ISI: Si-O spheres, probably calibration aerosol; Ice-CVI: Al-O particles; FINCH + IN-PCVI: steel particles). Also, potential measurement artifacts (soluble material) occurred (median abundance < 20%). After removal of the contamination particles, silicates and Ca-rich particles, carbonaceous material and metal oxides were the major INP/IPR particle types separated by all three techniques. Minor types include soot and Pb-bearing particles. Sea-salt and sulfates were identified by all three methods as INP/IPR. Lead was identified in less than 10% of the INP/IPR. It was mainly present as an internal mixture with other particle types, but also external lead-rich particles were found. Most samples showed a maximum of the INP/IPR size distribution at 400 nm geometric diameter. In a few cases, a second super-micron maximum was identified. Soot/carbonaceous material and metal oxides were present mainly in the submicron range. ISI and FINCH yielded silicates and Ca-rich particles mainly with diameters above 1 μm, while the Ice-CVI also sampled many submicron particles. Probably owing to the different meteorological conditions, the INP/IPR composition was highly variable on a sample to sample basis. Thus, some part of the discrepancies between the different techniques may result from the (unavoidable) non-parallel sampling. The observed differences of the particles group abundances as well as the mixing state of INP/IPR point to the need of further studies to better understand the influence of the separating techniques on the INP/IPR chemical composition.
In der vorliegenden Arbeit werden Aspekte autonomer und nichtautonomer dynamischer Systeme behandelt, wobei Attraktoren und verwandte Objekte eine wichtige Rolle spielen werden. Zunächst findet man in einem Kapitel über dynamische Systeme die Definition der grundlegenden Begriffe Attraktor, Repeller und Schiefproduktfluss, gefolgt von zwei hinreichenden Bedingungen für die Existenz von Attraktoren. Mit den Attraktoren und Repellern können dann im nächsten Kapitel Morsemengen eingeführt werden. Dadurch kann das Verhalten eines dynamischen Systems qualitativ beschrieben werden. Des weiteren wird auf die Bedeutung der Kettenrekurrenzmenge für die Morsemengen eingegangen. Im Kapitel über Kontrolltheorie wird, nach einer kurzen Einführung in dieses Gebiet, gezeigt, dass der dort definierte Lift einer Kettenkontrollmenge unter gewissen Voraussetzungen eine Morsemenge ist. Im letzten Kapitel geht es um Pullback-Attraktoren, die unter den angegebenen Bedingungen als Attraktoren für den Schiefproduktfluss interpretiert werden können.
Investigators in the cognitive neurosciences have turned to Big Data to address persistent replication and reliability issues by increasing sample sizes, statistical power, and representativeness of data. While there is tremendous potential to advance science through open data sharing, these efforts unveil a host of new questions about how to integrate data arising from distinct sources and instruments. We focus on the most frequently assessed area of cognition - memory testing - and demonstrate a process for reliable data harmonization across three common measures. We aggregated raw data from 53 studies from around the world which measured at least one of three distinct verbal learning tasks, totaling N = 10,505 healthy and brain-injured individuals. A mega analysis was conducted using empirical bayes harmonization to isolate and remove site effects, followed by linear models which adjusted for common covariates. After corrections, a continuous item response theory (IRT) model estimated each individual subject’s latent verbal learning ability while accounting for item difficulties. Harmonization significantly reduced inter-site variance by 37% while preserving covariate effects. The effects of age, sex, and education on scores were found to be highly consistent across memory tests. IRT methods for equating scores across AVLTs agreed with held-out data of dually-administered tests, and these tools are made available for free online. This work demonstrates that large-scale data sharing and harmonization initiatives can offer opportunities to address reproducibility and integration challenges across the behavioral sciences.
During January/February 2013, at the High Alpine Research Station Jungfraujoch a measurement campaign was carried out, which was centered on atmospheric ice-nucleating particles (INP) and ice particle residuals (IPR). Three different techniques for separation of INP and IPR from the non-ice-active particles are compared. The Ice Selective Inlet (ISI) and the Ice Counterflow Virtual Impactor (Ice-CVI) sample ice particles from mixed phase clouds and allow for the analysis of the residuals. The combination of the Fast Ice Nucleus Chamber (FINCH) and the Ice Nuclei Pumped Counterflow Virtual Impactor (IN-PCVI) provides ice-activating conditions to aerosol particles and extracts the activated INP for analysis.Collected particles were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis to determine size, chemical composition and mixing state. All INP/IPR-separating techniques had considerable abundances (median 20 – 70 %) of instrumental contamination artifacts (ISI: Si-O spheres, probably calibration aerosol; Ice-CVI: Al-O particles; FINCH+IN-PCVI: steel particles). Also, potential sampling artifacts (e.g., pure soluble material) occurred with a median abundance of < 20 %. While these could be explained as IPR by ice break-up, for INP their IN-ability pathway is less clear. After removal of the contamination artifacts, silicates and Ca-rich particles, carbonaceous material and metal oxides were the major INP/IPR particle types separated by all three techniques. Soot was a minor contributor. Lead was detected in less than 10 % of the particles, of which the majority were internal mixtures with other particle types. Sea-salt and sulfates were identified by all three methods as INP/IPR. Most samples showed a maximum of the INP/IPR size distribution at 400 nm geometric diameter. In a few cases, a second super-micron maximum was identified. Soot/carbonaceous material and metal oxides were present mainly in the submicron range. ISI and FINCH yielded silicates and Ca-rich particles mainly with diameters above 1 μm, while the Ice-CVI also separated many submicron IPR. As strictly parallel sampling could not be performed, a part of the discrepancies between the different techniques may result from variations in meteorological conditions and subsequent INP/IPR composition. The observed differences in the particle group abundances as well as in the mixing state of INP/IPR express the need for further studies to better understand the influence of the separating techniques on the INP/IPR chemical
composition.
The ALICE Zero Degree Calorimeter system (ZDC) is composed of two identical sets of calorimeters, placed at opposite sides with respect to the interaction point, 114 meters away from it, complemented by two small forward electromagnetic calorimeters (ZEM). Each set of detectors consists of a neutron (ZN) and a proton (ZP) ZDC. They are placed at zero degrees with respect to the LHC axis and allow to detect particles emitted close to beam direction, in particular neutrons and protons emerging from hadronic heavy-ion collisions (spectator nucleons) and those emitted from electromagnetic processes. For neutrons emitted by these two processes, the ZN calorimeters have nearly 100% acceptance.
During the √sNN = 2.76 TeV Pb-Pb data-taking, the ALICE Collaboration studied forward neutron emission with a dedicated trigger, requiring a minimum energy deposition in at least one of the two ZN. By exploiting also the information of the two ZEM calorimeters it has been possible to separate the contributions of electromagnetic and hadronic processes and to study single neutron vs. multiple neutron emission.
The measured cross sections of single and mutual electromagnetic dissociation of Pb nuclei at √sNN = 2.76 TeV, with neutron emission, are σsingle EMD = 187:4 ± 0.2 (stat.)−11.2+13.2 (syst.) b and σmutual EMD = 5.7 ± 0.1 (stat.) ±0.4 (syst.) b, respectively [1]. This is the first measurement of electromagnetic dissociation of 208Pb nuclei at the LHC energies, allowing a test of electromagnetic dissociation theory in a new energy regime. The experimental results are compared to the predictions from a relativistic electromagnetic dissociation model.
Aim: In the CheckRad-CD8 trial patients with locally advanced head and neck squamous cell cancer are treated with a single cycle of induction chemo-immunotherapy (ICIT). Patients with pathological complete response (pCR) in the re-biopsy enter radioimmunotherapy. Our goal was to study the value of F-18-FDG PET/CT in the prediction of pCR after induction therapy.
Methods: Patients treated within the CheckRad-CD8 trial that additionally received FDG- PET/CT imaging at the following two time points were included: 3–14 days before (pre-ICIT) and 21–28 days after (post-ICIT) receiving ICIT. Tracer uptake in primary tumors (PT) and suspicious cervical lymph nodes (LN +) was measured using different quantitative parameters on EANM Research Ltd (EARL) accredited PET reconstructions. In addition, mean FDG uptake levels in lymphatic and hematopoietic organs were examined. Percent decrease (Δ) in FDG uptake was calculated for all parameters. Biopsy of the PT post-ICIT acquired after FDG-PET/CT served as reference. The cohort was divided in patients with pCR and residual tumor (ReTu).
Results: Thirty-one patients were included. In ROC analysis, ΔSUVmax PT performed best (AUC = 0.89) in predicting pCR (n = 17), with a decline of at least 60% (sensitivity, 0.77; specificity, 0.93). Residual SUVmax PT post-ICIT performed best in predicting ReTu (n = 14), at a cutpoint of 6.0 (AUC = 0.91; sensitivity, 0.86; specificity, 0.88). Combining two quantitative parameters (ΔSUVmax ≥ 50% and SUVmax PT post-ICIT ≤ 6.0) conferred a sensitivity of 0.81 and a specificity of 0.93 for determining pCR. Background activity in lymphatic organs or uptake in suspected cervical lymph node metastases lacked significant predictive value.
Conclusion: FDG-PET/CT can identify patients with pCR after ICIT via residual FDG uptake levels in primary tumors and the related changes compared to baseline. FDG-uptake in LN + had no predictive value.
Trial registry: ClinicalTrials.gov identifier: NCT03426657.
The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385)±, Ξ(1530)0) produced in p–Pb collisions at sNN−−−√=5.02 TeV were measured in the rapidity range −0.5<yCMS<0 for event classes corresponding to different charged-particle multiplicity densities, ⟨dNch/dηlab⟩. The mean transverse momentum values are presented as a function of ⟨dNch/dηlab⟩, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of ⟨dNch/dηlab⟩. The equivalent ratios to pions exhibit an increase with ⟨dNch/dηlab⟩, depending on their strangeness content.
The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385)±, Ξ(1530)0) produced in p-Pb collisions at sNN−−−√=5.02 TeV were measured in the rapidity range −0.5<yCMS<0 for event classes corresponding to different charged-particle multiplicity densities, ⟨dNch/dηlab⟩. The mean transverse momentum values are presented as a function of ⟨dNch/dηlab⟩, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of ⟨dNch/dηlab⟩. The equivalent ratios to pions exhibit an increase with ⟨dNch/dηlab⟩, depending on their strangeness content.
The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385)±, Ξ(1530)0) produced in p-Pb collisions at sNN−−−√=5.02 TeV were measured in the rapidity range −0.5<yCMS<0 for event classes corresponding to different charged-particle multiplicity densities, ⟨dNch/dηlab⟩. The mean transverse momentum values are presented as a function of ⟨dNch/dηlab⟩, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of ⟨dNch/dηlab⟩. The equivalent ratios to pions exhibit an increase with ⟨dNch/dηlab⟩, depending on their strangeness content.
The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385)±,Ξ(1530)0) produced in p–Pb collisions at √sNN = 5.02 TeV were measured in the rapidity range −0.5<yCMS<0 for event classes corresponding to different charged-particle multiplicity densities, ⟨dNch/dηlab⟩. The mean transverse momentum values are presented as a function of ⟨dNch/dηlab⟩, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of ⟨dNch/dηlab⟩. The equivalent ratios to pions exhibit an increase with ⟨dNch/dηlab⟩, depending on their strangeness content.