Refine
Year of publication
Document Type
- Preprint (37)
- Article (35)
- Contribution to a Periodical (1)
Has Fulltext
- yes (73)
Is part of the Bibliography
- no (73)
Keywords
- density functional theory (4)
- α-RuCl3 (3)
- electronic band structure (2)
- electronic transport (2)
- p-n junction (2)
- photoelectron spectroscopy (2)
- scanning tunneling microscopy (2)
- transition-metal oxides (2)
- (F)EBID (1)
- 2D vdW magnets (1)
Institute
The antiferromagnet and semimetal EuCd2As2 has recently attracted a lot of attention due to a wealth of topological phases arising from the interplay of topology and magnetism. In particular, the presence of a single pair of Weyl points is predicted for a ferromagnetic configuration of Eu spins along the c-axis in EuCd2As2. In the search for such phases, we investigate here the effects of hydrostatic pressure in EuCd2As2. For that, we present specific heat, transport and μSR measurements under hydrostatic pressure up to ∼2.5GPa, combined with {\it ab initio} density functional theory (DFT) calculations. Experimentally, we establish that the ground state of EuCd2As2 changes from in-plane antiferromagnetic (AFMab) to ferromagnetic at a critical pressure of ≈2\,GPa, which is likely characterized by the moments dominantly lying within the ab plane (FMab). The AFMab-FMab transition at such a relatively low pressure is supported by our DFT calculations. Furthermore, our experimental and theoretical results indicate that EuCd2As2 moves closer to the sought-for FMc state (moments ∥ c) with increasing pressure further. We predict that a pressure of ≈\,23\,GPa will stabilize the FMc state, if Eu remains in a 2+ valence state. Thus, our work establishes hydrostatic pressure as a key tuning parameter that (i) allows for a continuous tuning between magnetic ground states in a single sample of EuCd2As2 and (ii) enables the exploration of the interplay between magnetism and topology and thereby motivates a series of future experiments on this magnetic Weyl semimetal.
The antiferromagnet and semimetal EuCd2As2 has recently attracted a lot of attention due to a wealth of topological phases arising from the interplay of topology and magnetism. In particular, the presence of a single pair of Weyl points is predicted for a ferromagnetic configuration of Eu spins along the c-axis in EuCd2As2. In the search for such phases, we investigate here the effects of hydrostatic pressure in EuCd2As2. For that, we present specific heat, transport and μSR measurements under hydrostatic pressure up to ∼2.5GPa, combined with {\it ab initio} density functional theory (DFT) calculations. Experimentally, we establish that the ground state of EuCd2As2 changes from in-plane antiferromagnetic (AFMab) to ferromagnetic at a critical pressure of ≈2\,GPa, which is likely characterized by the moments dominantly lying within the ab plane (FMab). The AFMab-FMab transition at such a relatively low pressure is supported by our DFT calculations. Furthermore, our experimental and theoretical results indicate that EuCd2As2 moves closer to the sought-for FMc state (moments ∥ c) with increasing pressure further. We predict that a pressure of ≈\,23\,GPa will stabilize the FMc state, if Eu remains in a 2+ valence state. Thus, our work establishes hydrostatic pressure as a key tuning parameter that (i) allows for a continuous tuning between magnetic ground states in a single sample of EuCd2As2 and (ii) enables the exploration of the interplay between magnetism and topology and thereby motivates a series of future experiments on this magnetic Weyl semimetal.
Motivated by the wealth of proposals and realizations of nontrivial topological phases in EuCd2As2, such as a Weyl semimetallic state and the recently discussed semimetallic versus semiconductor behavior in this system, we analyze in this work the role of the delicate interplay of Eu magnetism, strain and pressure on the realization of such phases. For that we invoke a combination of a group theoretical analysis with ab initio density functional theory calculations and uncover a rich phase diagram with various non-trivial topological phases beyond a Weyl semimetallic state, such as axion and topological crystalline insulating phases, and discuss their realization.
Motivated by the wealth of proposals and realizations of nontrivial topological phases in EuCd2As2, such as a Weyl semimetallic state and the recently discussed semimetallic versus semiconductor behavior in this system, we analyze in this work the role of the delicate interplay of Eu magnetism, strain and pressure on the realization of such phases. For that we invoke a combination of a group theoretical analysis with ab initio density functional theory calculations and uncover a rich phase diagram with various non-trivial topological phases beyond a Weyl semimetallic state, such as axion and topological crystalline insulating phases, and discuss their realization.
Motivated by the wealth of proposals and realizations of nontrivial topological phases in EuCd2As2, such as a Weyl semimetallic state and the recently discussed semimetallic versus semiconductor behavior in this system, we analyze in this work the role of the delicate interplay of Eu magnetism, strain and pressure on the realization of such phases. For that we invoke a combination of a group theoretical analysis with ab initio density functional theory calculations and uncover a rich phase diagram with various non-trivial topological phases beyond a Weyl semimetallic state, such as axion and topological crystalline insulating phases, and discuss their realization.
Lattice strains of appropriate symmetry have served as an excellent tool to explore the interaction of superconductivity in the iron-based superconductors with nematic and stripe spin-density wave (SSDW) order, which are both closely tied to an orthorhombic distortion. In this work, we contribute to a broader understanding of the coupling of strain to superconductivity and competing normal-state orders by studying CaKFe4As4 under large, in-plane strains of B1g and B2g symmetry. In contrast to the majority of iron-based superconductors, pure CaKFe4As4 exhibits superconductivity with relatively high transition temperature of Tc∼35 K in proximity of a non-collinear, tetragonal, hedgehog spin-vortex crystal (SVC) order. Through experiments, we demonstrate an anisotropic in-plane strain response of Tc, which is reminiscent of the behavior of other pnictides with nematicity. However, our calculations suggest that in CaKFe4As4, this anisotropic response correlates with the one of the SVC fluctuations, highlighting the close interrelation of magnetism and high-Tc superconductivity. By suggesting moderate B2g strains as an effective parameter to change the stability of SVC and SSDW, we outline a pathway to a unified phase diagram of iron-based superconductivity.
We present experimental results and theoretical simulations of the adsorption behavior of the metal–organic precursor Co2(CO)8 on SiO2 surfaces after application of two different pretreatment steps, namely by air plasma cleaning or a focused electron beam pre-irradiation. We observe a spontaneous dissociation of the precursor molecules as well as autodeposition of cobalt on the pretreated SiO2 surfaces. We also find that the differences in metal content and relative stability of these deposits depend on the pretreatment conditions of the substrate. Transport measurements of these deposits are also presented. We are led to assume that the degree of passivation of the SiO2 surface by hydroxyl groups is an important controlling factor in the dissociation process. Our calculations of various slab settings, using dispersion-corrected density functional theory, support this assumption. We observe physisorption of the precursor molecule on a fully hydroxylated SiO2 surface (untreated surface) and chemisorption on a partially hydroxylated SiO2 surface (pretreated surface) with a spontaneous dissociation of the precursor molecule. In view of these calculations, we discuss the origin of this dissociation and the subsequent autocatalysis.
Oxygen vacancies in strontium titanate surfaces (SrTiO3) have been linked to the presence of a two-dimensional electron gas with unique behavior. We perform a detailed density functional theory study of the lattice and electronic structure of SrTiO3 slabs with multiple oxygen vacancies, with a main focus on two vacancies near a titanium dioxide terminated SrTiO3 surface. We conclude based on total energies that the two vacancies preferably inhabit the first two layers, i.e. they cluster vertically, while in the direction parallel to the surface, the vacancies show a weak tendency towards equal spacing. Analysis of the nonmagnetic electronic structure indicates that oxygen defects in the surface TiO2 layer lead to population of Ti ${{t}_{2g}}$ states and thus itinerancy of the electrons donated by the oxygen vacancy. In contrast, electrons from subsurface oxygen vacancies populate Ti eg states and remain localized on the two Ti ions neighboring the vacancy. We find that both the formation of a bound oxygen-vacancy state composed of hybridized Ti 3eg and 4p states neighboring the oxygen vacancy as well as the elastic deformation after extracting oxygen contribute to the stabilization of the in-gap state.
In recent years, the notion of 'Quantum Materials' has emerged as a powerful unifying concept across diverse fields of science and engineering, from condensed-matter and coldatom physics to materials science and quantum computing. Beyond traditional quantum materials such as unconventional superconductors, heavy fermions, and multiferroics, the field has significantly expanded to encompass topological quantum matter, two-dimensional materials and their van der Waals heterostructures, Moiré materials, Floquet time crystals, as well as materials and devices for quantum computation with Majorana fermions. In this Roadmap collection we aim to capture a snapshot of the most recent developments in the field, and to identify outstanding challenges and emerging opportunities. The format of the Roadmap, whereby experts in each discipline share their viewpoint and articulate their vision for quantum materials, reflects the dynamic and multifaceted nature of this research area, and is meant to encourage exchanges and discussions across traditional disciplinary boundaries. It is our hope that this collective vision will contribute to sparking new fascinating questions and activities at the intersection of materials science, condensed matter physics, device engineering, and quantum information, and to shaping a clearer landscape of quantum materials science as a new frontier of interdisciplinary scientific inquiry. We stress that this article is not meant to be a fully comprehensive review but rather an up-to-date snapshot of different areas of research on quantum materials with a minimal number of references focusing on the latest developments.
We present a numerical investigation of energy and charge distributions during electron-beam-induced growth of tungsten nanostructures on SiO2 substrates by using a Monte Carlo simulation of the electron transport. This study gives a quantitative insight into the deposition of energy and charge in the substrate and in the already existing metallic nanostructures in the presence of the electron beam. We analyze electron trajectories, inelastic mean free paths, and the distribution of backscattered electrons in different compositions and at different depths of the deposit. We find that, while in the early stages of the nanostructure growth a significant fraction of electron trajectories still interacts with the substrate, when the nanostructure becomes thicker the transport takes place almost exclusively in the nanostructure. In particular, a larger deposit density leads to enhanced electron backscattering. This work shows how mesoscopic radiation-transport techniques can contribute to a model that addresses the multi-scale nature of the electron-beam-induced deposition (EBID) process. Furthermore, similar simulations can help to understand the role that is played by backscattered electrons and emitted secondary electrons in the change of structural properties of nanostructured materials during post-growth electron-beam treatments.
The aim of the present overview article is to raise awareness of an essential aspect that is usually not accounted for in the modelling of electron transport for focused-electron-beam-induced deposition (FEBID) of nanostructures: Surface excitations are on the one hand responsible for a sizeable fraction of the intensity in reflection-electron-energy-loss spectra for primary electron energies of up to a few kiloelectronvolts and, on the other hand, they play a key role in the emission of secondary electrons from solids, regardless of the primary energy. In this overview work we present a general perspective of recent works on the subject of surface excitations and on low-energy electron transport, highlighting the most relevant aspects for the modelling of electron transport in FEBID simulations.
The interaction of trimethyl(methylcyclopentadienyl)platinum(IV) ((C5H4CH3)Pt(CH3)3) molecules on fully and partially hydroxylated SiO2 surfaces, as well as the dynamics of this interaction were investigated using density functional theory (DFT) and finite temperature DFT-based molecular dynamics simulations. Fully and partially hydroxylated surfaces represent substrates before and after electron beam treatment and this study examines the role of electron beam pretreatment on the substrates in the initial stages of precursor dissociation and formation of Pt deposits. Our simulations show that on fully hydroxylated surfaces or untreated surfaces, the precursor molecules remain inactivated while we observe fragmentation of (C5H4CH3)Pt(CH3)3 on partially hydroxylated surfaces. The behavior of precursor molecules on the partially hydroxylated surfaces has been found to depend on the initial orientation of the molecule and the distribution of surface active sites. Based on the observations from the simulations and available experiments, we discuss possible dissociation channels of the precursor.
he family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce3Bi4Ni3. It is an isoelectronic analog of the prototypical Kondo insulator Ce3Bi4Pt3 and of the recently discovered Weyl-Kondo semimetal Ce3Bi4Pd3. In contrast to the volume-preserving Pt-Pd substitution, structural and chemical analyses reveal a positive chemical pressure effect in Ce3Bi4Ni3 relative to its heavier counterparts. Based on the results of electrical resistivity, Hall effect, magnetic susceptibility, and specific heat measurements, we identify an energy gap of 65–70 meV, about eight times larger than that in Ce3Bi4Pt3 and about 45 times larger than that of the Kondo-insulating background hosting the Weyl nodes in Ce3Bi4Pd3. We show that this gap as well as other physical properties do not evolve monotonically with increasing atomic number, i.e., in the sequence Ce3Bi4Ni3−Ce3Bi4Pd3−Ce3Bi4Pt3, but instead with increasing partial electronic density of states of the 𝑑 orbitals at the Fermi energy. This work opens the possibility to investigate the conditions under which topological states develop in this series of strongly correlated 3-4-3 materials.
Heterostructures of graphene in proximity to magnetic insulators open the possibility to investigate exotic states emerging from the interplay of magnetism, strain and charge transfer between the layers. Recent reports on the growth of self-integrated atomic wires of β-RuCl3 on graphite suggest these materials as versatile candidates to investigate these effects. Here we present detailed first principles calculations on the charge transfer and electronic structure of β-RuCl3/heterostructures and provide a comparison with the work function analysis of the related honeycomb family members α-RuX3 (X = Cl,Br,I). We find that proximity of the two layers leads to a hole-doped graphene and electron-doped RuX3 in all cases, which is sensitively dependent on the distance between the two layers. Furthermore, strain effects due to lattice mismatch control the magnetization which itself has a strong effect on the charge transfer. Charge accumulation in β-RuCl3 strongly drops away from the chain making such heterostructures suitable candidates for sharp interfacial junctions in graphene-based devices.
Understanding the physics of strongly correlated electronic systems has been a central issue in condensed matter physics for decades. In transition metal oxides, strong correlations characteristic of narrow d bands are at the origin of remarkable properties such as the opening of Mott gap, enhanced effective mass, and anomalous vibronic coupling, to mention a few. SrVO3 with V4+ in a 3d1 electronic configuration is the simplest example of a 3D correlated metallic electronic system. Here, the authors' focus on the observation of a (roughly) quadratic temperature dependence of the inverse electron mobility of this seemingly simple system, which is an intriguing property shared by other metallic oxides. The systematic analysis of electronic transport in SrVO3 thin films discloses the limitations of the simplest picture of e–e correlations in a Fermi liquid (FL); instead, it is shown show that the quasi-2D topology of the Fermi surface (FS) and a strong electron–phonon coupling, contributing to dress carriers with a phonon cloud, play a pivotal role on the reported electron spectroscopic, optical, thermodynamic, and transport data. The picture that emerges is not restricted to SrVO3 but can be shared with other 3d and 4d metallic oxides.
Electronic and magnetic properties of the RuX3 (X=Cl, Br, I) family: two siblings - and a cousin?
(2022)
Motivated by reports of metallic behavior in the recently synthesized RuI3, in contrast to the Mott-insulating nature of the actively discussed α-RuCl3, as well as RuBr3, we present a detailed comparative analysis of the electronic and magnetic properties of this family of trihalides. Using a combination of first-principles calculations and effective-model considerations, we conclude that RuI3, similarly to the other two members, is most probably on the verge of a Mott insulator, but with much smaller magnetic moments and strong magnetic frustration. We predict the ideal pristine crystal of RuI3 to have a nearly vanishing conventional nearest-neighbor Heisenberg interaction and to be a quantum spin liquid candidate of a possibly different kind than the Kitaev spin liquid. In order to understand the apparent contradiction to the reported resistivity ρ, we analyze the experimental evidence for all three compounds and propose a scenario for the observed metallicity in existing samples of RuI3. Furthermore, for the Mott insulator RuBr3, we obtain a magnetic Hamiltonian of a similar form to that in the much-discussed α-RuCl3 and show that this Hamiltonian is in agreement with experimental evidence in RuBr3.
Motivated by recent reports of a quantum-disordered ground state in the triangular lattice compound NaRuO2, we derive a jeff = 1/2 magnetic model for this system by means of first-principles calculations. The pseudospin Hamiltonian is dominated by bond-dependent off-diagonal Γ interactions, complemented by a ferromagnetic Heisenberg exchange and a notably antiferromagnetic Kitaev term. In addition to bilinear interactions, we find a sizable four-spin ring exchange contribution with a strongly anisotropic character, which has been so far overlooked when modeling Kitaev materials. The analysis of the magnetic model, based on the minimization of the classical energy and exact diagonalization of the quantum Hamiltonian, points toward the existence of a rather robust easy-plane ferromagnetic order, which cannot be easily destabilized by physically relevant perturbations.
Deconfinement of Mott localized electrons into topological and spin–orbit-coupled Dirac fermions
(2020)
The interplay of electronic correlations, spin–orbit coupling and topology holds promise for the realization of exotic states of quantum matter. Models of strongly interacting electrons on honeycomb lattices have revealed rich phase diagrams featuring unconventional quantum states including chiral superconductivity and correlated quantum spin Hall insulators intertwining with complex magnetic order. Material realizations of these electronic states are, however, scarce or inexistent. In this work, we propose and show that stacking 1T-TaSe2 into bilayers can deconfine electrons from a deep Mott insulating state in the monolayer to a system of correlated Dirac fermions subject to sizable spin–orbit coupling in the bilayer. 1T-TaSe2 develops a Star-of-David charge density wave pattern in each layer. When the Star-of-David centers belonging to two adyacent layers are stacked in a honeycomb pattern, the system realizes a generalized Kane–Mele–Hubbard model in a regime where Dirac semimetallic states are subject to significant Mott–Hubbard interactions and spin–orbit coupling. At charge neutrality, the system is close to a quantum phase transition between a quantum spin Hall and an antiferromagnetic insulator. We identify a perpendicular electric field and the twisting angle as two knobs to control topology and spin–orbit coupling in the system. Their combination can drive it across hitherto unexplored grounds of correlated electron physics, including a quantum tricritical point and an exotic first-order topological phase transition.
Motivated by the on-going discussion on the nature of magnetism in the quantum Ising chain CoNb2O6, we present a first-principles-based analysis of its exchange interactions by applying an \textit{ab initio} approach with additional modelling that accounts for various drawbacks of a purely density functional theory ansatz. With this method we are able to extract and understand the origin of the magnetic couplings under inclusion of all symmetry-allowed terms, and to resolve the conflicting model descriptions in CoNb2O6. We find that the twisted Kitaev chain and the transverse-field ferromagnetic Ising chain views are mutually compatible, although additional off-diagonal exchanges are necessary to provide a complete picture. We show that the dominant exchange interaction is a ligand-centered exchange process - involving the eg electrons -, which is rendered anisotropic by the low-symmetry crystal fields environments in CoNb2O6, giving rise to the dominant Ising exchange, while the smaller bond-dependent anisotropies are found to originate from d−d kinetic exchange processes involving the t2g electrons. We demonstrate the validity of our approach by comparing the predictions of the obtained low-energy model to measured THz and inelastic neutron scattering spectra.
The family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce3Bi4Ni3. It is an isoelectronic analog of the prototypical Kondo insulator Ce3Bi4Pt3 and of the recently discovered Weyl-Kondo semimetal Ce3Bi4Pd3. In contrast to the volume-preserving Pt-Pd substitution, structural and chemical analyses reveal a positive chemical pressure effect in Ce3Bi4Ni3 relative to its heavier counterparts. Based on the results of electrical resistivity, Hall effect, magnetic susceptibility, and specific heat measurements, we identify an energy gap of 65-70 meV, about eight times larger than that in Ce3Bi4Pt3 and about 45 times larger than that of the Kondo-insulating background hosting the Weyl nodes in Ce3Bi4Pd3. We show that this gap as well as other physical properties do not evolve monotonically with increasing atomic number, i.e., in the sequence Ce3Bi4Ni3-Ce3Bi4Pd3-Ce3Bi4Pt3, but instead with increasing partial electronic density of states of the d orbitals at the Fermi energy. To understand under which condition topological states form in these materials is a topic for future studies.