Refine
Year of publication
Document Type
- Doctoral Thesis (19)
- Book (1)
Has Fulltext
- yes (20)
Is part of the Bibliography
- no (20)
Keywords
- Arzneimittel (2)
- Bioequivalence (2)
- Biowaiver (2)
- Wirkstofffreisetzung (2)
- AIDS (1)
- Absorption modeling (1)
- Bioverfügbarkeit (1)
- Dissolution (1)
- Doxycycline (1)
- Fenofibrate (1)
Institute
Standard biorelevant media reflect the average gastrointestinal (GI) physiology in healthy volunteers. The use of biorelevant media in in vitro experiments has become an important strategy to predict drug behaviour in vivo and is often combined with in silico tools in order to simulate drug plasma profiles over time. In addition to the healthy population, the effects of disease state or co-administration of other drugs on plasma profiles must be considered to assure drug efficacy and safety. Thus, there is a need for a more accurate representation of the human GI physiology when it is altered by disease or co-administered drugs in in vitro dissolution experiments.
This thesis focused on the development of biorelevant media and dissolution tests reflecting GI physiology in circumstances where the gastric pH is elevated. Diseases linked to an elevated gastric pH are hypochlorhydria and achlorhydria, but these days treatment with acid-reducing agents (ARAs) is the single greatest cause of elevation in gastric pH. pH-dependent drug-drug interactions (DDIs) with ARAs are frequent, as the ARAs are used in a number of diseases using a variety of drugs. As the drugs currently on the market are often poorly soluble and ionisable, their dissolution is highly dependent on the pH of the GI tract, especially the gastric pH.
The thesis research consisted of several steps. In the first step, physiological changes in the human GI tract during the therapy with ARAs were identified. Parameters of the standard biorelevant gastric medium FaSSGF were adjusted to the identified changes to reflect the impact of ARA co-administration on the gastric physiology. The media aim to assess the potential extent of the ARA impact on gastric physiology by introducing biorelevant media pairs, ARA pH 4 and pH 6 media, of which one reflects a lesser, and the other a stronger impact of ARAs.
In the second step these ARA media were implemented in in vitro dissolution set-ups.
The dissolution of poorly soluble ionisable drugs was assessed using one-stage, two-stage and transfer model set-ups, as well as using a more evolved in vitro system TIM-1. Comparison of results from dissolution set-ups using the standard, low pH, gastric biorelevant medium FaSSGF (pH 1.6 or 2), and the same set-ups using ARA pH 4 and pH 6 media, shows a decrease in dissolution rate and extent for weakly basic compounds PSWB 001 and dipyridamole, and an increase in rate and extent of dissolution for the weakly acidic compound raltegravir potassium, when the gastric pH is elevated. Due to different physicochemical properties, the extent of the impact of physiological changes during ARA therapy (when either ARA pH 4 or pH 6 medium is selected) on dissolution varied among the model drugs. Thus, the bracketing approach, which considers a range of the possible ARA co-administration impact on drug dissolution, was confirmed to be best practice in assessing the impact of ARAs.
In the third step, dissolution data from in vitro experiments with ARA media was implemented into in silico models. The predictions using various in silico model approaches in Simcyp™ Simulator (minimal and full PBPK model, dissolution input using DRM and DLM) successfully bracketed in vivo data on drug administration during ARA therapy and correctly predicted an overall decrease in plasma concentration for the two model weakly basic compounds and an increase in plasma concertation for the model weakly acidic compound.
In all assessed scenarios, the ARA methods proved to be an essential part of evaluating and predicting the impact of ARAs on drug pharmacokinetics, and appropriately predicted the extent of a possible impact of ARAs on the drug plasma profiles. Thus, the ARA biorelevant media and dissolution tests were demonstrated to be valuable tools reflecting administration of drugs when the gastric pH is elevated and able to predict the impact of ARA therapy on drug administration.
The ability to evaluate the impact of human (patho) physioloy on drug behaviour in the gastrointestinal tract is of great importance, as the GI conditions play a significant role in drug release and absorption. Thus, there is great interest on the part of the pharmaceutical industry and regulatory agencies to develop best practices in this field, especially for pH-dependent DDIs. The media and dissolution tests developed in this thesis are biorelevant methods appropriate for evaluation of the impact of elevated gastric pH on drug efficacy and safety. Such methods, used as a risk assessment tool, in connection with evaluation of the efficacy window and potential toxicity, may help to increase confidence about decisions as to whether a pH-effect will occur and whether it is relevant or not, prior to conducting clinical studies. They may also enable changes in inclusion/exclusion criteria during recruiting for large-scale efficacy trials. In fact, the biopharmaceutic approach to drug development is becoming standard practice on a number of fronts, including metabolic DDIs, renal and hepatic insufficiency, powering decision-making process and possibly even waiving certain types of clinical studies.
...
Since combinatorial chemistry and high throughput screening have become a common technique in the drug discovery phase the number of compounds being considered has increased frequently. These structures are often characterized by high molecular weight, high lipophilicity and low solubility in aqueous and physiological media. Due to the generally poor bioavailability, new in vitro techniques were needed for screening of pharmacokinetic properties. An important parameter for these screening methods is the implementation at an early state of drug discovery phase, to find potential lead structures, before investment costs become significant. The established in vitro methods for the prediction of membrane interaction are not reliable especially for poorly soluble compounds. A new method that is fast and easy to use, requires only small amounts of NCE and which can provide more reliable predictions is needed. In this study, a new screening technique based on surface activity profiling for the prediction of oral drug absorption was evaluated with special emphasis on the predictability of biological membrane interaction of poorly soluble drug compounds. It was demonstrated that drug absorption through a bilayer membrane can be modeled by the orientation of compounds at the air/water interface. Thus amphilicity of a drug is generally related to both oral absorption and blood brain barrier penetration. In turn, amphiphilicity is influenced by the lipophilicity, size and charge distribution of a drug. Surface activity profiling was determined by analysis of surface pressure profiles using the Gibbs adsorption isotherm. The surface activity measurements were carried out using a multichannel tensiometer Delta 8, which was developed by Kibron to be utilized in conjugation high throughput screening in early drug discovery processes. For this study two test sets were analyzed, one for the prediction of gastrointestinal wall interaction and the second for the prediction of the penetration behavior at the blood brain barrier. Both test sets consist of drug compounds with a wide range of absorption properties and consist mainly of compounds with poor water solubility. Since the drugs characteristics varied, they were classified according to water solubility and surface activity and a sample preparation method for each group was established. For the prediction of oral drug absorption, three different methods were established to model the interaction of compound and gastrointestinal wall. For drug compounds with solubility above 1mmol/L the traditional shake-flask method enabled the determination of the amphiphilic properties of drug compounds in pure aqueous media. Compounds with solubility below 1mmol/L tend to not to exhibit any increase in surface activity. Thus surface tension measurements of compounds, which exhibited a limited surface activity due to poor aqueous solubility, were conducted from stock solutions prepared with various organic solvents. Mainly polar organic solvents were used. A mixture of DMSO and DMF resulted in the best combination of properties: the intensive solubility enhancing effect of DMF and the lower intrinsic surface activity of DMSO. The polar solvent ruptured the water clusters, so that highly lipophilic structures had a higher affinity to the solvent and higher concentrations could be obtained. For these compounds higher maximum surface pressure were generated than was possible in pure aqueous media. The surface pressure data were correlated with the fraction absorbed values in vivo. However it was found that poor water solubility is not the only limiting step to exhibiting any surface activity. Some compounds were showed no surface activity in either solvent system. Therefore a micelle vehicle method was established using short chain phospholipids to mimic the gastrointestinal wall. It could be concluded from the results, that non surface active drugs can interact with the phospholipids micelle vehicle in a way analogous to their interaction with the membrane bilayer. The relative critical micelle concentration was correlated with the fraction absorbed of this test set. A sample preparation schema based on the three types of drugs was established. This schema enabled us to predict the absorbance of slightly soluble and poorly soluble drugs with acceptable reliability for early compound screening. For the prediction of blood brain barrier penetration using surface activity profiling as analyzing method, a test set with very poorly soluble characteristics was chosen. The sample preparation method was based on a strictly aqueous approach using the ‘shake flask’ method. The surface tension measurements enabled correlation of the amphiphilic properties of the very poorly soluble drug compounds with BBB uptake. From the aqueous surface pressure profiles and the determination of physicochemical parameters, it was found that blood brain barrier is more likely when a drug provides a small cross-sectional area, As, at the interface. The cross-sectional area is the only parameter which is independent from the maximal concentration in aqueous media and it is particularly suitable for lower solubility compounds. In summary, it was shown that amphilicity is related to biological membrane interaction in the human body and that surface activity profiling with appropriate sample preparation can be used as a reliable screening tool for the prediction of oral drug absorption of poorly soluble drugs. Furthermore an in vitro screening method of blood-brain-barrier penetration was established.
Die vorliegende Dissertation stellt eine Methode zur Löslichkeitsbestimmung vor, die für die Anwendung im Rahmen von BCS-Biowaiver Monografien entwickelt wurde. Der Methode und dem dafür konzipierten Studienprotokoll liegt das Prinzip der „Minimallöslichkeit“ zugrunde. Damit lässt sich einfach, kosteneffizient und wissenschaftlich verlässlich feststellen, ob ein Arzneistoff „hochlöslich“ gemäß den BCS-Biowaiver Richtlinien der Gesundheitsbehörden FDA, EMA und WHO ist und sich dementsprechend generische Produkte des Arzneistoffs grundsätzlich für das BCS-Biowaiver Zulassungsverfahren eignen.
Dieses Verfahren für die Zulassung von Generika erlaubt die Beurteilung der Bioäquivalenz eines festen generischen Arzneimittels zur peroralen Anwendung auf Basis von in vitro-Freisetzungsuntersuchungen anstatt von in vivo-Studien wie z.B. pharmakokinetischen Studien am Menschen und erleichtert dadurch eine Marktzulassung sowohl durch Zeit- als auch Kosteneinsparung. Die Anwendung des Verfahrens ist von Vorteil, um die Verfügbarkeit von qualitativ hochwertigen, generischen (und damit kostengünstigen) Arzneimitteln zu erhöhen. Dies ist besonders wünschenswert für die Verfügbarkeit von gemäß der Weltgesundheitsorganisation essenziellen Arzneistoffen und unter denen gerade von solchen, die zur Bekämpfung von Krankheiten mit nur wenigen und/oder teuren therapeutischen Alternativen benötigt werden.
Entstanden ist die Löslichkeitsbestimmungsmethode im Rahmen von zwei Projekten, die beide zu diesem Ziel einer guten globalen Gesundheitsversorgung beitragen: die Erstellung der Biowaiver Monografien von Proguanilhydrochlorid (ein Malaria-Prophylaktikum) und Cefalexinmonohydrat (ein Antibiotikum aus der Gruppe der Cephalosporine) setzt die Publikationsreihe „Biowaiver Monograph Series“ der FIP Focus Group „Bioclassification/Biowaiver“ fort. Jede Monografie gibt eine umfassende wissenschaftliche Empfehlung zur Eignung eines Wirkstoffs der WHO „Model List of Essential Medicines“ und seiner generischen Produkte für das BCS-Biowaiver Verfahren hinsichtlich aller regulatorisch geforderten Aspekte ab. Proguanilhydrochlorid (BCS Klasse III – „hochlöslich“ und nicht „hoch permeabel“) und Cefalexinmonohydrat (BCS Klasse I – „hochlöslich“ und „hoch permeabel“) sind beide für dieses Zulassungsverfahren geeignet.
Im Zuge des anderen Projektes wurde die Löslichkeit und anschließend die BCS Klasse von Wirkstoffen bestimmt, die der 16. und 17. Version der WHO „Model List of Essential Medicines“ neu hinzugefügt wurden. Neun von 16 untersuchten Wirkstoffen, die in feste, perorale Arzneimittel formuliert werden können, sind im Hinblick auf ihre BCS Klasse für das eine Zulassung per BCS-Biowaiver geeignet. Eine umfangreichere Empfehlung könnte im Rahmen einer Biowaiver Monografie gegeben werden.
Die experimentelle Bestimmung der Löslichkeit über einen pH-Wert-Bereich von 1-6,8 war essenzieller Bestandteil beider Projekte, da Literaturdaten zur Löslichkeit der Wirkstoffe nicht oder nur unvollständig vorlagen. Die entwickelte Methode basiert auf einer im Kleinmaßstab angesetzten „Shake-Flask“-Methode zur Bestimmung der thermodynamischen Löslichkeit, wird jedoch in einem Zeitrahmen von 24 Stunden durchgeführt. Sie nutzt die höchste Dosis der Wirkstoffe als Substanzmenge, um zu bestimmen, ob dieser „hochlöslich“ gemäß den BCS-Biowaiver Richtlinien ist oder nicht. Die Methode bzw. das dazugehörige Studienprotokoll beinhalten Empfehlungen zu den einzelnen Schritten der Durchführung, der Auswahl der Medien und Herausforderungen wie Präzipitation (Fallbeispiel: Proguanilhydrochlorid) und Zersetzungsreaktionen (Fallbeispiel: Cefalexinmonohydrat). Löslichkeitsdaten, die mit dieser Methode erhoben werden, können für eine Zulassung per BCS-Biowaiver bei den Gesundheitsbehörden eingereicht werden, aber auch für ein Vorab-Screening genutzt werden, dass „hochlösliche“ Arzneistoffe aus einer Vielzahl von Substanzen herauszufiltern soll, um nähere Untersuchungen im Rahmen einer Biowaiver Monografie anzuschließen.
Gegenstand dieser Dissertation war das Ermitteln der Verbesserung der peroralen Bioverfügbarkeit Fenofibrat (FFB) durch lipid-basierte Formulierung (LBF). Eine weitere Aufgabe bestand darin, verschiedene analytische Methoden zur Bewertung der Verbesserung der oralen Bioverfügbarkeit von Fenofibrat einzusetzen. Diese schlossen in vitro biorelevante Löslichkeits-, Dispersions-, Auflösungs- und Präzipitationstests ein. Auf Basis der analytischen Ergebnisse wurden dann PBPK-Modelle verwendet, um menschliche Plasmaprofile nach der Verabreichung der FFB-Formulierungen zu simulieren. Die daraus resultierenden in silico-Vorhersagen stimmten mit den in vivo-Beobachtungen überein. Durch Anwendung der Parametersensitivitätsanalyse war es weiterhin möglich, ein mechanistisches Verständnis der beteiligten geschwindigkeitsbegrenzenden Schritte zu erreichen.
Formulierungen auf Lipidbasis können nach dem Pouton-Klassifizierungssytem eingeteilt werden. Typ I Formulierungen bestehen ausschließlich aus Ölen, während am anderen Ende der Skala die Typ IV Formulierung weitestgehend aus Tensiden ist. In dieser Arbeit wurden in erster Linie Lipidformulierungen Typ IIIA und Typ IIIB untersucht.
Es wurde gezeigt, dass Dispersionstests an FFB-Lipidformulierungen am besten unter Verwendung der USP 3-Apparatur durchgeführt werden, da in diesem Apparat die GI-Motilität in vivo am besten reflektiert wird. Um die Hydrodynamik in verschiedenen Auflösungsapparaten zu vergleichen, wurde der Auflösungsversuch von LBF Nr. 1 – Nr. 4 von FFB auch unter Verwendung von USP 2 durchgeführt. Ungeachtet von kompendialen oder biorelevanten Medien führten die meisten dieser Lipidformulierungen zur Auflösung eines Großteils des beladenen Medikaments, im Gegensatz zum unformulierten Fenofibrat, das sich in nüchternem Zustand kaum auflöst. Weiter zeigten die Transfermodellexperimente an den Lipidformulierungen von FFB, dass eine intestinale Präzipitation nach einer Magenauflösung unwahrscheinlich ist.
Durch mathematische Transformation der Noyes-Whitney-Gleichung kann ein Excel-Toolkit zur Berechnung des z-Werts aus in-vitro-Auflösungsprofilen verwendet werden. Die z-Werte werden dann in physiologisch-basierte pharmakokinetische in silico Modelle, STELLA® und Simcyp®, eingesetzt. Anhand der erforderlichen post-absorptiven Parameter kann mithilfe dieser Modelle die Plasma-Arzneistoff-Konzentration nach oraler Verabreichung von verschiedenen Formulierungen vorhergesagt werden. Darüber hinaus ermöglicht der Simcyp®-Simulator eine Reihe von virtuellen Versuchen, die PK-Variabilität vom Wirkstoff in verschiedenen Bevölkerungsgruppen zu bestimmen. Um diese Möglichkeiten für LBF von Fenofibrat zu testen, wurde LBF Nr. 4 modelliert. Das Simulationsergebnis von Simcyp® entsprach dem aus der STELLA®-Software. Weiterhin wurden die Plasmafenofibrinsäure-Konzentrationsprofile von den Modellen genau vorhergesagt. Die Punktschätzwerte für Cmax und AUC, berechnet aus den In-silico und in vivo Plasmaprofilen, lagen sogar im Bereich von 0,8-1,25 für die SMEDDS Lösung und Kapselformulierungen. Diese Übereinstimmung von in vitro-in silico mit in vivo wurde weiterhin durch Berechnung der jeweiligen f2 Faktoren unterstützt.
Basierend auf diesen Ergebnissen scheint es, dass der In-vitro-In-Silico-In-vivo-Ansatz ein nützliches Werkzeug zum Identifizieren und Vergleichen von Beschränkungen der oralen Absorption für Formulierungen auf Lipidbasis und zum Optimieren der Lipidformulierungsentwicklung von schlecht löslichen Arzneimitteln darstellt.
Die Forschung beschrieben in dieser Dissertation ist ein Teil der "European Research and Innovation Programme - PEARRL", und wurde von Horizon 2020 Marie Sklodowska-Curie actions der Europäischen Union, unter Förderungsnummer 674909 unterstützt.
In den letzten Jahren, wurde Senkung der Intensität der pharmazeutischen Forschung und Entwicklung beobachtet, da die Weiterentwicklung der Wirkstoffmolekülen hinzu einer "handlichen" Formulierung viele Schwierigkeiten aufweist. Meiste der neuen Wirkstoffkandidaten, die sich in Entwicklung befinden, haben suboptimale Eigenschaften in Bezug zur Löslichkeit und Auflösung und zeigen schlechte Bioverfügbarkeit, wenn eingenommen. Deswegen verlangen meiste neue Wirkstoffkandidate einen besonderen Ansatz in Bezug auf Formulierung, um akzeptable orale Bioverfügbarkeit zu erreichen. Diese neue Formulierungen werden meistens als “bio-enabling” Formulierungen bezeichnet und werden in Heilmittelentwicklung immer häufiger verwendet.
Hauptziel dieser Dissertation ist zu erforschen ob, durch Verbinden von biorelevanten in vitro Werkzeugen mit in silico Modeling und Simulationen, die in vitro Löslichkeit und Auflösung von bio-enabling Formulierungen mechanistisch erkläert und besser verstanden werden kann und somit eine erfolgreiche Simulation von in vivo Leistung erreicht werden kann.
Als Erstes wurden die physiologische Parameter, die die pharmakokinetik oraler Formulierungen beeinflüssen, identifiziert, indem die Auswirkung der Wirkstoffe, die zur Behandlung Magen-Darm-Krankheiten genutzt werden, sowie deren Pharmakokinetik, beurteilt wurde. Unter anderem wurde pH als einer der entscheinenden phyisiologischen Parameter erkannt, da es die Pharmakokinetik peroral verabreichter Stoffe signifikant beeinflüssen kann.
Als zweiter Schritt, mit besonderer Beachtung auf die Verwendung der biorelevanten in vitro Werkzeugen für die Erforschung der in vivo Auflösungsprozesse von bio-enabling Formulierungen, Fokus auf die biorelevante Medien und in vitro Apparaturen, die mögliche Prezipitationskinetik einschätzen können, wurde gesetzt. Biorelevante Medien sind wässrige Flüssigkeiten, die die Zusammensetzung der gastrointestinaler Flüssigkeiten nachmachen und für die Auflösungsuntersuchungen genutzt werden. Bis heute beinhalten die Aspirationsstudien die wichtigsten Hinweise und Informationen für den Design biorelevanter Medien. Es wurde beobachtet, dass die berichteten Werte mancher phyisiologisher Parameter erhebliche Unterschiede zwischen den Aspirationsstudien zeigen. Deswegen wurde untersucht, ob die Ergebnisse durch die Auswahl an Methodologie, die für die Entnahme und die Auswertung der Proben genutzt worden sind, beeinflusst werden können, wobei besondere Aufmerksamkeit den pH und der Pufferkapazität geschenkt wurde. Es wurde gezeigt, dass Unterschiede im Prozess der Probenhandhabung, z.B. Zentrifugieren und Lagerung einen deutlichen Einfluss auf die gemessenen Werte haben kann. Ausserdem, wurden in dieser Arbeit die in vitro Setups, die bisher in der Literatur zur Beurteilung der Übersättigung u.o. Ausfällung von Arzneimitteln im oberen Magen-Darm-Trakt vorgeschlagen wurden, überprüft und ihre Nützlichkeit und aktuelle Anwendung bewertet.
Nach Behebung der oben genannten Probleme, wurden zwei Fallbeispielformulierungen ausgewählt, um die Haupthypothese zu untersuchen. Die erste Formulierung ist auf den Markt unter dem Namen EMEND® und enthält den Wirkstoff in Nanoform. Die zweite Formulierung wird als INTELENCE® vermarktet und ist eine amorphe feste Dispersion des Wirkstoffs Etravirin. Durch die Wahl zwei unterschiedlicher Formulierungsansätzen konnten unterschiedliche Fallszenarien untersucht werden, wodurch umfassendere Vorschläge für die Bewältigung der Herausforderungen bei in vitro Experimenten und in silico Modelling mit bio-enabling Formulierungen möglich waren.
Bezogen auf den in dieser Dissertation beschriebenen Ansatz, ein mechanistisches Verständnis des in vivo Absorptionsprozesses, sowie eine erfolgreiche Simulation der nach der Verabreichung resultierenden Plasmaprofile einer bio-enabling-Formulierung der Nanoskala- und einer amorphen festen Dispersion wurde erreicht. Darüber hinaus wurden mögliche Wege vorgeschlagen, um einige Herausforderungen im Hinblick auf die Entwicklung von PBPK-Modellen für biofähige Formulierungen anzugehen. Diese Arbeit zeigt die mögliche Anwendung und Bedeutung der Absorptionsmodellierung für die rationale Formulierungsentwicklung und für die Stärkung des Wissens über Bio-Heilmittel in Bezug auf bio-enabling Formulierungen. Mithilfe dieses Ansatzes können die wesentlichen Parameter identifiziert werden, die das pharmakokinetische Verhalten schwerlöslicher Wirkstoffe beeinflussen, die als bio-enabling Formulierungen formuliert sind, und ermöglichen wiederum eine robuste Vorhersage der klinischen Ergebnisse.
Formulation scientists have developed a toolkit of strategies that can improve the solubility and subsequent bioavailability of poorly soluble candidates. Amorphous formulations are especially appealing due to the significant improvement in solubility the amorphous form can provide, but must be stabilized for effective performance (Timpe, 2007).
2. The Importance of Drug Polymer Interactions in Precipitation Inhibition
Polymeric “precipitation inhibitors” have seen widespread usage in the literature (Warren, 2010). The precipitation inhibition effect of polymers on precipitations is related to interference with nucleation and crystal growth (Xu, 2013). Many techniques have been reported in the literature to predict these interactions, however, they are not suitable to screening due to API and time resources required, which are not amenable to early stage pharmaceutical development.
3. Mesoporous Silica: An Emerging Formulation Technology
Mesoporous silicon dioxide has emerged in recent years as a new option for stabilizing the amorphous form. Upon impregnation of the silica with a concentrated drug solution, the drug can be molecularly adsorbed and locally and sterically confined, preventing recrystallization (Ditzinger, 2018). Upon administration of mesoporous silica formulations to the body the amorphous formulation generates supersaturation which must be stabilized using precipitation inhibitors (Guzman, 2007).
4. Co-incorporation: A New Method to Combine Precipitation Inhibitors with Mesoporous Silica
There has been no systematic study of how best to incorporate precipitation inhibitors into mesoporous silica formulations. The current standard practice involves combining inhibitors in a physical mixture with the drug-loaded silica, either by pestle and mortar or overhead stirring. Due to the lack of a defined protocol, there is uncertainty about how reliably the precipitation inhibitor is combined with the drug-loaded silica on a batch to batch basis. In this work, a novel co-incorporated formulation of glibenclamide and the precipitation inhibitor, HPMCAS, onto mesoporous silica was described. By co-incorporating the precipitation inhibitor, the formulation significantly outperformed the commonly applied simple physical blend due to the formation of drug-polymer interactions in the solid state.
5. In Silico Pharmaceutics: A New Method to Select Precipitation Inhibitors for Mesoporous Silica
An approach that can incorporate understanding of the drug-polymer interactions with a quick and efficient screening process would be very useful. The COnductor like Screening MOdel for Real Solvents (COSMO-RS) is a quantum mechanical theory, which can be used to derive thermodynamic properties of interest. (Klamt, 1993, 1995, 2003). We proposed excess mixing enthalpies of drug and polymer could be calculated using the COSMO-RS theory. This new approach was applied to screen precipitation inhibitors for three model compounds, all of which showed a strong positive correlation between the rank assigned based on the calculated free enthalpy of mixing and the overall formulation performance.
6. Conclusion
This body of work aimed to improve the processes underpinning the design and development of mesoporous silica with precipitation inhibitors. Firstly, this involved two extensive literature reviews in the area of solubility enhancement formulation technologies and precipitation inhibition. Secondly, a mechanistic rational and experimental approach was developed to improve the formulation of precipitation inhibitors with mesoporous silica, the “co-incorporation” approach significantly improved process efficiency and formulation performance. Finally, combining insights from the aforementioned review, and learnings from the mechanistic analysis of the “co-incorporation” approach, an in silico screening protocol was developed to calculate the enthalpy of interaction between drug and polymer, to identify the most optimal precipitation inhibitor for a given formulation.
The present work comprises different projects within the scope of public health. In detail, they all aim at combating the high-burden diseases HIV/AIDS, malaria and tuberculosis more effectively. Since there was, and still is, no harmonization between the existing biowaiver guidelines, the biowaiver dissolution test conditions by WHO and FDA were compared against each other using drug products, which had already demonstrated BE to the comparator in vivo. Thereby it could be shown that the dissolution conditions proposed by the WHO are more appropriate for granting biowaivers than those of the FDA. Further, the applicability of the WHO dissolution test conditions was investigated using the APIs ethambutol, isoniazid and pyrazinamide (all BCS Class III) as model compounds. These investigations demonstrated that the concept of the biowaiver proved to work properly, i.e. leading to no false positive BE decision and an acceptable incidence of false negative BE decisions. In addition, four new biowaiver monographs were published addressing important APIs in the treatment of HIV/AIDS and malaria. Before these efforts, there were only a very few biowaiver monographs available for antiviral or antimalarial APIs, i.e. the database of biowaiver monographs has been clearly improved. The last part of the present work dealt with the extension of the biowaiver concept to related areas such as the WHO Prequalification of Medicines Programme. Investigations revealed that the biowaiver tools are generally eligible for prequalification of drug products containing ethambutol, isoniazid, pyrazinamide, or lamivudine to prove BE between an appropriate comparator and the test candidate. By contrast, some APIs are excluded from the biowaiver procedure. In conclusion, the implementation of the biowaiver tools for prequalification of biowaivable APIs is, along with BCS-based biowaiver approval of new generics, an important step towards making essential, high-quality drug products more cost-effective and, as a consequence, more accessible for a larger percentage of the population. In that way, the treatment conditions for those in need living in the developing countries can be improved enormously, so that those who are poor do not have to receive poor treatment. The quality standard of essential medicines will increase worldwide, thereby helping to combat the high-burden diseases better and, in turn, lead to an improvement of the global health status.