530 Physik
Refine
Year of publication
- 2020 (260) (remove)
Document Type
- Article (153)
- Preprint (78)
- Doctoral Thesis (21)
- Bachelor Thesis (3)
- Contribution to a Periodical (3)
- Conference Proceeding (1)
- Master's Thesis (1)
Has Fulltext
- yes (260)
Is part of the Bibliography
- no (260)
Keywords
Institute
- Physik (253)
- Frankfurt Institute for Advanced Studies (FIAS) (121)
- Informatik (95)
- ELEMENTS (5)
- Präsidium (3)
- Helmholtz International Center for FAIR (2)
- Biochemie, Chemie und Pharmazie (1)
- Geowissenschaften / Geographie (1)
- Informatik und Mathematik (1)
- Medizin (1)
- Sportwissenschaften (1)
- Zentrum für Biomolekulare Magnetische Resonanz (BMRZ) (1)
In dieser Arbeit wurde die Messung des Flusses von Protonen in Silber-Silber-Kollisionen bei 1:58 AGeV beschrieben. Dabei wurden drei verschiedene Flow Koeffzienten betrachtet, der gerichtete, der elliptische sowie der dreieckige Fluss.
Nachdem die Protonen zunächst anhand ihrer Masse identifziert wurden, wurde die Reaktionsebene rekonstruiert. Nachfolgend wurde das Vorgehen zur Bestimmmung der ersten drei Flow-Koeffzienten v1, v2 und v3 beschrieben. Diese wurden anschließend in Abhäangigkeit des Transversalimpulses und der Rapidität für vier Zentralitätsklassen im Bereich von 0 - 40% Zentralität dargestellt.
Da die Daten ebenfalls Silber-Kohlenstoff Reaktionen enthalten, weisen die Spektren eine Abweichung vom erwarteten Verlauf auf. Daher wurden diese Reaktionen anhand des in Abschnitt 3.1 beschriebenen Energieverhältnisses ERAT abgeschätzt und mit Hilfe eines Cut-Off Werts ausgeschlossen. Die daraus resultierenden Spektren konnten dadurch verbessert werden.
Im Fall der Gold-Gold Strahlzeit aus dem Jahr 2012 konnten neben Daten der hier diskutierten Flow-Koeffzienten v1, v2 und v3 ebenfalls Koeffzienten höherer Ordnung, v4 und v5, sowie Hinweise auf ein Auftreten von v6 gefunden werden.
Ähnliche Analysen könnten im Fall der Daten der Silber-Silber Kollisionen durchgeführt werden. Hier tritt zwar ein quantitativ kleinerer Fluss auf, da es sich bei den kollidierenden Nuklei um ein kleineres System handelt, jedoch treten im Vergleich zu Gold-Gold Kollisionen etwa zweifach so hohe Event-Raten auf. Somit kann mit der in dieser Arbeit beschriebenen Herangehensweise unter Verwendung der Daten der gesamten Strahlzeit untersucht werden, ob Hinweise auf Flow-Koeffzienten höherer Ordnung zu finden sind.
Außerdem sollte bei den bestehenden Ergebnissen eine Korrektur des Effekts der Occupancy des Detektors durchgeführt werden, da dieser wie in Abschnitt 3.2.1 beschrieben zu Verfälschungen des gemessenen Flusses führt. Dieser Effekt wird insbesondere im Fall des gerichteten Flusses v1 deutlich.
Des Weiteren ist eine Abschätzung der systematischen Fehler der Messungen erforderlich.
Dafür kann untersucht werden, welche Auswahlkriterien und Parameter die Messung beeinflussen, beispielsweise die Spurrekonstruktion und -selektion oder die Teilchenidentifikation. Unter Betrachtung der Auswirkungen auf die Ergebnisse der Flow-Koeffzienten kann die Analyse daraufhin mit Variationen dieser Werte durchgeführt werden. Somit kann der Bereich der systematischen Fehler abgeschätzt werden.
In dieser Arbeit wurde der spezifische Energieverlust im TOF Detektor genutzt, um leichte Kerne zu identifizieren. Da die gemeinsame Betrachtung aller Szintillatorstäbe bei der aktuellen Kalibrierung des TOF Detektors keine eindeutige Zuordnung ermöglicht, wurde der Energieverlust der einzelnen Stäbe individuell parametrisiert. So konnten Helium und sogar Lithium Kerne selektiert werden. Die Impulskorrektur hat für zweifach geladene Kerne, abgesehen von sehr hohen Impulsen, eine erfolgreiche Korrektur der Masse ermöglicht. Bei Lithium hingegen wurde der Impuls überkorrigiert, sodass die Masse zu niedrig rekonstruiert wurde.
Durch Optimierung der Impulskorrektur könnte zusammen mit einer verbesserten Kalibrierung des TOF Detektors ein sehr hohes Auflösungsvermögen erreicht werden. Daher sollte die systematische Impulskorrektur für hohe Impulse durch weitere Simulationen verbessert und der Energieverlust vor dem Auftreffen auf den META Detektor genauer untersucht werden. Optimalerweise würde zur Kalibrierung des TOF Detektors die Abhängigkeit des Energieverlustes vom Winkel, in welchem die Teilchen auf den Detektor treffen, berücksichtigt werden. Ziel ist es, alle Stäbe pro zurückgelegter Wegstrecke zu kalibrieren, sodass weder ein Unterschied durch den Einfallwinkel der Teilchen noch durch die verschiedenen Stablängen aufkommt. Folglich wäre eine sehr spezifische Teilchenselektion möglich.
In dieser Arbeit wurde zunächst schrittweise das Vorgehen beim Bau der TRD Prototypkammern , sowie die Maßnahmen zur Verbesserung der Kammerstabilität erklärt, um sicherzustellen, dass die erhobenen Messdaten zuverlässig sind. Es ist an dieser Stelle nochmals hervorzuheben, dass bereits kleine Veränderungen in der Bauweise einen großen Einfluss auf die Kammerstabilität haben.
Es wurde mit der Kammer 3 der Anodenstrom, die deponierte Photonenenergie und die Clusterrate gemessen. Anschließend wurden diese Daten ausgewertet und aus den Ergebnissen die Gasverstärkung berechnet. Die Auswertung bestätigt, dass die Kammer im Proportionalbereich betrieben wurde. Nach dem Vergleich der Gasverstärkungsfaktoren der Messung mit den simulierten Werten, zeigt sich dass die Messungen stärker als erwartet von den simulierten Werten abweichen.
Für weitere, genauere Aussagen wäre es interessant die Ergebnisse dieser Arbeit durch modifizierte Messungen zu uberprüfen. Dabei könnte der Einfluss verschiedener Gasdrucke innerhalb und außerhalb der Kammer sowie die Variation der Raumtemperatur auf die Gasverstärkung explizit untersucht werden. Außerdem wäre es von großem Interesse, Messungen mit verschiedenen Ar und CO2 und Xe und CO2 Mischverhältnissen durchzuführen, da der TRD im CBM Experiment mit Xe und CO2 betrieben werden soll, und der Gasverstärkungsfaktor ausschlaggebend für die angelegte Anodenspannung im laufenden Betrieb sein wird.
Das CBM-Experiment konzentriert sich auf die Untersuchung der Eigenschaften des Quark-Gluon-Plasmas bei hohen Netto-Baryonendichten und moderaten Temperaturen. An der zukünftigen Beschleunigeranlage FAIR an der GSI findet das Experiment, neben vielen anderen Experimenten, ihren Platz. Der TRD ist, neben dem RICH, STS und TOF, einer der zentralen Detektoren im CBM-Experiment. Der TRD nutzt dabei den physikalischen Effekt der Übergangsstrahlung, die durch ein geladenes Teilchen beim Durchqueren einer Grenze zweier Medien mit unterschiedlichen Dielektrizitätskonstanten mit einer gewissen Wahrscheinlichkeit entsteht, um Elektronen von Pionen trennen zu können. Im Jahr 2017 wurde an der DESY 4 TRD-Prototypen in einer Teststrahlzeit getestet. Dabei handelt es sich um große TRD-Module mit den Maßen 95 · 95 cm2 , was dem finalen Design sehr nahe kommt. Die Untersuchung der DESY-Daten in Kapitel 5 brachte große Problematiken in den Daten zum Vorschein. Die Hauptprobleme der DESY-Daten sind: 1) Bug des SPADIC-Chips 2.0, bei der FN-Trigger zeitlich verschoben wurden; 2) schwache und suboptimale Trigger-Bedingung, wodurch sehr viel Rauschen aufgenommen wurde. Die Daten müssen für weitere Auswertung aufbereitet werden, wobei sehr viel Information und Statistik verloren geht, da einige Daten durch diverse Probleme nicht mehr rekonstruierbar sind. Kapitel 6 beschäftigt sich mit der Simulation der Detektorantwort und geht genauer auf die einzelnen Schritte, die zur Simulation des vom SPADIC erzeugten Pulses benötigt werden, ein. Am Ende werden Ergebnisse aus beiden Datensätzen miteinander verglichen. Um einen optimalen Vergleich zu gewähren, wird die Simulation bestmöglich an die Einstellungen in der Teststrahlzeit angepasst. Hauptsächlich geht es um die Erhöhung des Gasgains und der Verschiebung der Peaking-Zeit des Pulses. Im Allgemeinen können wir in der Simulation einige Effekte, die auch in den DESY-Daten vorkommen, nachsimulieren. Wir erhalten zum Teil sehr unterschiedliche Ergebnisse in der Simulation, deren Richtigkeit nicht verifiziert werden kann, da die Daten aufgrund der Probleme unzuverlässig werden. Durch die Analyse der DESY-Daten konnten wir die Problematik in den Daten besser verstehen. Eine sinnvolle Anpassung der Simulation wird durch die Unzuverlässigkeit der DESY-Daten unmöglich. Für die Optimierung der Simulation müsste man einen Vergleich mit neueren, zuverlässigeren Daten aus zukünftigen Teststrahlzeiten nehmen.
Stored and cooled, highly-charged ions offer unprecedented capabilities for precision studies in the realm of atomic, nuclear structure and astrophysics[1]. After the successful investigation of the 96Ru(p,7)97Rh reaction cross section in 2009[2], the first measurement of the 124Xe(p,7)125Cs reaction cross section has been performed with decelerated, fully-ionized 124Xe ions in 2016 at the Experimental Storage Ring (ESR) of GSI[3]. Using a Double Sided Silicon Strip Detector, introduced directly into the ultra-high vacuum environment of a storage ring, the 125Cs proton-capture products have been successfully detected. The cross section has been measured at 5 different energies between 5.5AMeV and 8AMeV, on the high energy tail of the Gamow-window for hot, explosive scenarios such as supernovae and X-ray binaries. The elastic scattering on the H2 gas jet target is the major source of background to count the (p,7) events. Monte Carlo simulations show that an additional slit system in the ESR in combination with the energy information of the Si detector will enable background free measurements of the proton-capture products. The corresponding hardware is being prepared and will increase the sensitivity of the method tremendously.
Stored and cooled highly-charged ions offer unprecedented capabilities for precision studies in realm of atomic-, nuclear-structure and astrophysics. In context of the latter, after the successful investigation of the cross section of 96Ru(p,γ) in 2009, in 2016 the first measurement of the 124Xe(p,γ)125Cs reaction was performed at the Experimental Storage Ring (ESR) at GSI.
Impact parameter sensitive study of inner-shell atomic processes in Xe54+, Xe52+ → Xe collisions
(2020)
In this work, we present a pilot experiment in the experimental storage ring (ESR) at GSI devoted to impact parameter sensitive studies of inner shell atomic processes for bare and He-like xenon ions (Xe54+, Xe52+) colliding with neutral xenon gas atoms. The projectile and target x-rays have been measured at different observation angles for all impact parameters as well as for the impact parameter range of ∼35 - 70 fm.
We measured the Coulomb dissociation of 16O into 4He and 12C at the R3B setup in a first campaign within FAIR Phase 0 at GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt. The goal was to improve the accuracy of the experimental data for the 12C(α,γ)16O fusion reaction and to reach lower center-ofmass energies than measured so far.
The experiment required beam intensities of 109 16O ions per second at an energy of 500 MeV/nucleon. The rare case of Coulomb breakup into 12C and 4He posed another challenge: The magnetic rigidities of the particles are so close because of the same mass-to-charge-number ratio A/Z = 2 for 16O, 12C and 4He. Hence, radical changes of the R3B setup were necessary. All detectors had slits to allow the passage of the unreacted 16O ions, while 4He and 12C would hit the detectors' active areas depending on the scattering angle and their relative energies. We developed and built detectors based on organic scintillators to track and identify the reaction products with sufficient precision.
The electron-capture process was studied for Xe54+ colliding with H2 molecules at the internal gas target of the Experimental Storage Ring (ESR) at GSI, Darmstadt. Cross-section values for electron capture into excited projectile states were deduced from the observed emission cross section of Lyman radiation, being emitted by the hydrogenlike ions subsequent to the capture of a target electron. The ion beam energy range was varied between 5.5 and 30.9 MeV/u by applying the deceleration mode of the ESR. Thus, electron-capture data were recorded at the intermediate and, in particular, the low-collision-energy regime, well below the beam energy necessary to produce bare xenon ions. The obtained data are found to be in reasonable qualitative agreement with theoretical approaches, while a commonly applied empirical formula significantly overestimates the experimental findings.
The hot and dense QCD matter produced in nuclear collisions at ultrarelativistic energy is characterized by very intense electromagnetic fields which attain their maximal strength in the early pre-equilibrium stage and interplay with the strong vorticity induced in the plasma by the large angular momentum of the colliding system. A promising observable keeping trace of these phenomena is the directed flow of light hadrons and heavy mesons produced in symmetric and asymmetric heavy-ion collisions as well as in proton-induced reactions. In particular, the splitting of the directed flow between particles with the same mass but opposite electric charge as a function of rapidity and transverse momentum gives access to the electromagnetic response of medium in all collision stages and in the different colliding systems. The highest influence of the electromagnetic fields is envisaged in the pre-equilibrium stage of the collision and therefore a significant imprint is left on the early-produced heavy quarks. The aim of this review is to discuss the current developments towards the understanding of the generation and relaxation time of the electromagnetic fields embedded in both large and small systems and their impact on the charge-odd directed flow of light and heavy particles, highlighting the experimental results and the different theoretical approaches. Since it is possible to perform realistic simulations of high-energy collisions that incorporate also the generated electromagnetic fields and vorticity, the study of the directed flow can provide unique insight into the early nonequilibrium phase and the ensuing QGP formation and transport properties.
The cumulant ratios up to fourth order of the Z distributions of the largest fragment in spectator fragmentation following 107,124Sn+Sn and 124La+Sn collisions at 600 MeV/nucleon have been investigated. They are found to exhibit the signatures of a second-order phase transition established with cubic bond percolation and previously observed in the ALADIN experimental data for fragmentation of 197Au projectiles at similar energies. The deduced pseudocritical points are found to be only weakly dependent on the A/Z ratio of the fragmenting spectator source. The same holds for the corresponding chemical freeze-out temperatures of close to 6 MeV.The experimental cumulant distributions are quantitatively reproduced with the Statistical Multifragmentation Model and parameters used to describe the experimental fragment multiplicities, isotope distributions and their correlations with impact-parameter related observables in these reactions. The characteristic coincidence of the zero transition of the skewness with the minimum of the kurtosis excess appears to be a generic property of statistical models and is found to coincide with the maximum of the heat capacity in the canonical thermodynamic fragmentation model.
We study odd parity J=1/2 and J=3/2 Ξc resonances using a unitarized coupled-channel framework based on a SU(6)lsf×HQSS-extended Weinberg–Tomozawa baryon–meson interaction, while paying a special attention to the renormalization procedure. We predict a large molecular ΛcK¯ component for the Ξc(2790) with a dominant 0− light-degree-of-freedom spin configuration. We discuss the differences between the 3/2− Λc(2625) and Ξc(2815) states, and conclude that they cannot be SU(3) siblings, whereas we predict the existence of other Ξc-states, one of them related to the two-pole structure of the Λc(2595). It is of particular interest a pair of J=1/2 and J=3/2 poles, which form a HQSS doublet and that we tentatively assign to the Ξc(2930) and Ξc(2970), respectively. Within this picture, the Ξc(2930) would be part of a SU(3) sextet, containing either the Ωc(3090) or the Ωc(3119), and that would be completed by the Σc(2800). Moreover, we identify a J=1/2 sextet with the Ξb(6227) state and the recently discovered Σb(6097). Assuming the equal spacing rule and to complete this multiplet, we predict the existence of a J=1/2 Ωb odd parity state, with a mass of 6360 MeV and that should be seen in the ΞbK¯ channel.
The SU(3) spin model with chemical potential corresponds to a simplified version of QCD with static quarks in the strong coupling regime. It has been studied previously as a testing ground for new methods aiming to overcome the sign problem of lattice QCD. In this work we show that the equation of state and the phase structure of the model can be fully determined to reasonable accuracy by a linked cluster expansion. In particular, we compute the free energy to 14-th order in the nearest neighbour coupling. The resulting predictions for the equation of state and the location of the critical end points agree with numerical determinations to O(1%) and O(10%), respectively. While the accuracy for the critical couplings is still limited at the current series depth, the approach is equally applicable at zero and non-zero imaginary or real chemical potential, as well as to effective QCD Hamiltonians obtained by strong coupling and hopping expansions.
The production of the Λ(1520) baryonic resonance has been measured at midrapidity in inelastic pp collisions at s√=7 TeV and in p–Pb collisions at sNN−−−√=5.02 TeV for non-single diffractive events and in multiplicity classes. The resonance is reconstructed through its hadronic decay channel Λ(1520) →pK− and the charge conjugate with the ALICE detector. The integrated yields and mean transverse momenta are calculated from the measured transverse momentum distributions in pp and p–Pb collisions. The mean transverse momenta follow mass ordering as previously observed for other hyperons in the same collision systems. A Blast-Wave function constrained by other light hadrons (π, K, K0S, p, Λ) describes the shape of the Λ(1520) transverse momentum distribution up to 3.5 GeV/c in p–Pb collisions. In the framework of this model, this observation suggests that the Λ(1520) resonance participates in the same collective radial flow as other light hadrons. The ratio of the yield of Λ(1520) to the yield of the ground state particle Λ remains constant as a function of charged-particle multiplicity, suggesting that there is no net effect of the hadronic phase in p–Pb collisions on the Λ(1520) yield.
This article reports measurements characterizing the Underlying Event (UE) associated with hard scatterings at midrapidity (|η| < 0.8) in pp collisions at s√ = 13 TeV. The hard scatterings are identified by the leading particle, the charged particle with the highest transverse momentum (pleadingT) in the event. Charged-particle number-densities and summed transverse-momentum densities are measured in different azimuthal regions defined with respect to the leading particle direction: Toward, Transverse, and Away. The Toward and Away regions contain the fragmentation products of the hard scatterings in addition to the UE contribution, whereas particles in the Transverse region are expected to originate predominantly from the UE. The study is performed as a function of pleadingT with three different pT thresholds for the associated particles, ptrackT > 0.15, 0.5, and 1.0 GeV/c. The charged-particle density in the Transverse region rises steeply for low values of pleadingT and reaches a plateau. The results confirm the trend that the charged-particle density in the Transverse region shows a stronger increase with s√ than the inclusive charged-particle density at midrapidity. The UE activity is increased by approximately 20% when going from 7 TeV to 13 TeV pp collisions. The plateau in the Transverse region (5 <pleadingT< 40 GeV/c) is further characterized by the probability distribution of its charged-particle multiplicity normalized to its average value (relative transverse activity, RT) and the mean transverse momentum as a function of RT. Experimental results are compared to model calculations using PYTHIA 8 and EPOS LHC. The overall agreement between models and data is within 30%. These measurements provide new insights on the interplay between hard scatterings and the associated UE in pp collisions.
Higher harmonic non-linear flow modes of charged hadrons in Pb-Pb collisions at √sNN = 5.02 TeV
(2020)
Anisotropic flow coefficients, vn, non-linear flow mode coefficients, χn,mk, and correlations among different symmetry planes, ρn,mk are measured in Pb-Pb collisions at sNN−−−√ = 5.02 TeV. Results obtained with multi-particle correlations are reported for the transverse momentum interval 0.2 < pT < 5.0 GeV/c within the pseudorapidity interval 0.4 < |η| < 0.8 as a function of collision centrality. The vn coefficients and χn,mk and ρn,mk are presented up to the ninth and seventh harmonic order, respectively. Calculations suggest that the correlations measured in different symmetry planes and the non-linear flow mode coefficients are dependent on the shear and bulk viscosity to entropy ratios of the medium created in heavy-ion collisions. The comparison between these measurements and those at lower energies and calculations from hydrodynamic models places strong constraints on the initial conditions and transport properties of the system.
Coherent photoproduction of ρ⁰ vector mesons in ultra-peripheral Pb-Pb collisions at √sNN = 5.02 TeV
(2020)
Cross sections for the coherent photoproduction of ρ0 vector mesons in ultra-peripheral Pb-Pb collisions at sNN−−−√ = 5.02 TeV are reported. The measurements, which rely on the π+π− decay channel, are presented in three regions of rapidity covering the range |y| < 0.8. For each rapidity interval, cross sections are shown for different nuclear-breakup classes defined according to the presence of neutrons measured in the zero-degree calorimeters. The results are compared with predictions based on different models of nuclear shadowing. Finally, the observation of a coherently produced resonance-like structure with a mass around 1.7 GeV/c2 and a width of about 140 MeV/c2 is reported and compared with similar observations from other experiments.
The pT-differential non-linear flow modes, v4,22, v5,32, v6,33 and v6,222 for π±, K±, K0S , p + p¯¯¯, Λ + Λ¯¯¯¯ and ϕ-meson have been measured for the first time at sNN−−−√ = 5.02 TeV in Pb-Pb collisions with the ALICE detector at the Large Hadron Collider. The results were obtained with a multi-particle technique, correlating the identified hadrons with reference charged particles from a different pseudorapidity region. These non-linear observables probe the contribution from the second and third order initial spatial anisotropy coefficients to higher flow harmonics. All the characteristic features observed in previous pT-differential anisotropic flow measurements for various particle species are also present in the non-linear flow modes, i.e. increase of magnitude with increasing centrality percentile, mass ordering at low pT and particle type grouping in the intermediate pT range. Hydrodynamical calculations (iEBE-VISHNU) that use different initial conditions and values of shear and bulk viscosity to entropy density ratios are confronted with the data at low transverse momenta. These calculations exhibit a better agreement with the anisotropic flow coefficients than the non-linear flow modes. These observations indicate that non-linear flow modes can provide additional discriminatory power in the study of initial conditions as well as new stringent constraints to hydrodynamical calculations.
The inclusive J/ψ elliptic (v2) and triangular (v3) flow coefficients measured at forward rapidity (2.5 < y < 4) and the v2 measured at midrapidity (|y| < 0.9) in Pb-Pb collisions at sNN−−−√ = 5.02 TeV using the ALICE detector at the LHC are reported. The entire Pb-Pb data sample collected during Run 2 is employed, amounting to an integrated luminosity of 750 μb−1 at forward rapidity and 93 μb−1 at midrapidity. The results are obtained using the scalar product method and are reported as a function of transverse momentum pT and collision centrality. At midrapidity, the J/ψ v2 is in agreement with the forward rapidity measurement. The centrality averaged results indicate a positive J/ψ v3 with a significance of more than 5σ at forward rapidity in the pT range 2 < pT < 5 GeV/c. The forward rapidity v2, v3, and v3/v2 results at low and intermediate pT (pT ≲ 8 GeV/c) exhibit a mass hierarchy when compared to pions and D mesons, while converging into a species-independent curve at higher pT. At low and intermediate pT, the results could be interpreted in terms of a later thermalization of charm quarks compared to light quarks, while at high pT, path-length dependent effects seem to dominate. The J/ψ v2 measurements are further compared to a microscopic transport model calculation. Using a simplified extension of the quark scaling approach involving both light and charm quark flow components, it is shown that the D-meson vn measurements can be described based on those for charged pions and J/ψ flow.
Systematic studies of charge-dependent two- and three-particle correlations in Pb-Pb collisions at sNN−−−√ = 2.76 and 5.02 TeV used to probe the Chiral Magnetic Effect (CME) are presented. These measurements are performed for charged particles in the pseudorapidity (η) and transverse momentum (pT) ranges |η| < 0.8 and 0.2 < pT < 5 GeV/c. A significant charge-dependent signal that becomes more pronounced for peripheral collisions is reported for the CME-sensitive correlators γ1, 1 = 〈cos(φα + φβ − 2Ψ2)〉 and γ1, − 3 = 〈cos(φα − 3φβ + 2Ψ2)〉. The results are used to estimate the contribution of background effects, associated with local charge conservation coupled to anisotropic flow modulations, to measurements of the CME. A blast-wave parametrisation that incorporates local charge conservation tuned to reproduce the centrality dependent background effects is not able to fully describe the measured γ1,1. Finally, the charge and centrality dependence of mixed-harmonics three-particle correlations, of the form γ1, 2 = 〈cos(φα + 2φβ − 3Ψ3)〉, which are insensitive to the CME signal, verify again that background contributions dominate the measurement of γ1,1.
Z-boson production in p-Pb collisions at √sNN = 8.16 TeV and Pb-Pb collisions at √sNN = 5.02 TeV
(2020)
Measurement of Z-boson production in p-Pb collisions at sNN−−−√ = 8.16 TeV and Pb-Pb collisions at sNN−−−√ = 5.02 TeV is reported. It is performed in the dimuon decay channel, through the detection of muons with pseudorapidity −4 < ημ < −2.5 and transverse momentum pμT > 20 GeV/c in the laboratory frame. The invariant yield and nuclear modification factor are measured for opposite-sign dimuons with invariant mass 60 < mμμ < 120 GeV/c2 and rapidity 2.5 < yμμcms < 4. They are presented as a function of rapidity and, for the Pb-Pb collisions, of centrality as well. The results are compared with theoretical calculations, both with and without nuclear modifications to the Parton Distribution Functions (PDFs). In p-Pb collisions the center-of-mass frame is boosted with respect to the laboratory frame, and the measurements cover the backward (−4.46 < yμμcms < −2.96) and forward (2.03 < yμμcms < 3.53) rapidity regions. For the p-Pb collisions, the results are consistent within experimental and theoretical uncertainties with calculations that include both free-nucleon and nuclear-modified PDFs. For the Pb-Pb collisions, a 3.4σ deviation is seen in the integrated yield between the data and calculations based on the free-nucleon PDFs, while good agreement is found once nuclear modifications are considered.
Inclusive ψ(2S) production is measured in p-Pb collisions at the centre-of-mass energy per nucleon-nucleon pair sNN−−−√ = 8.16 TeV, using the ALICE detector at the CERN LHC. The production of ψ(2S) is studied at forward (2.03 < ycms < 3.53) and backward (−4.46 < ycms < −2.96) centre-of-mass rapidity and for transverse momentum pT < 12 GeV/c via the decay to muon pairs. In this paper, we report the integrated as well as the ycms- and pT-differential inclusive production cross sections. Nuclear effects on ψ(2S) production are studied via the determination of the nuclear modification factor that shows a strong suppression at both forward and backward centre-of-mass rapidities. Comparisons with corresponding results for inclusive J/ψ show a similar suppression for the two states at forward rapidity (p-going direction), but a stronger suppression for ψ(2S) at backward rapidity (Pb-going direction). As a function of pT, no clear dependence of the nuclear modification factor is found. The relative size of nuclear effects on ψ(2S) production compared to J/ψ is also studied via the double ratio of production cross sections [σψ(2S)/σJ/ψ]pPb/[σψ(2S)/σJ/ψ]pp between p-Pb and pp collisions. The results are compared with theoretical models that include various effects related to the initial and final state of the collision system and also with previous measurements at sNN−−−√ = 5.02 TeV.
The inclusive J/ψ production in Pb–Pb collisions at the center-of-mass energy per nucleon pair sNN−−−√ = 5.02 TeV, measured with the ALICE detector at the CERN LHC, is reported. The J/ψ meson is reconstructed via the dimuon decay channel at forward rapidity (2.5 < y < 4) down to zero transverse momentum. The suppression of the J/ψ yield in Pb–Pb collisions with respect to binary-scaled pp collisions is quantified by the nuclear modification factor (RAA). The RAA at sNN−−−√ = 5.02 TeV is presented and compared with previous measurements at sNN−−−√ = 2.76 TeV as a function of the centrality of the collision, and of the J/ψ transverse momentum and rapidity. The inclusive J/ψ RAA shows a suppression increasing toward higher transverse momentum, with a steeper dependence for central collisions. The modification of the J/ψ average transverse momentum and average squared transverse momentum is also studied. Comparisons with the results of models based on a transport equation and on statistical hadronization are carried out.
The multiplicity dependence of electron production from heavy-flavour hadron decays as a function of transverse momentum was measured in p-Pb collisions at sNN−−−√ = 5.02 TeV using the ALICE detector at the LHC. The measurement was performed in the centre-of-mass rapidity interval −1.07 < ycms < 0.14 and transverse momentum interval 2 < pT < 16 GeV/c. The multiplicity dependence of the production of electrons from heavy-flavour hadron decays was studied by comparing the pT spectra measured for different multiplicity classes with those measured in pp collisions (QpPb) and in peripheral p-Pb collisions (Qcp). The QpPb results obtained are consistent with unity within uncertainties in the measured pT interval and event classes. This indicates that heavy-flavour decay electron production is consistent with binary scaling and independent of the geometry of the collision system. Additionally, the results suggest that cold nuclear matter effects are negligible within uncertainties, in the production of heavy-flavour decay electrons at midrapidity in p-Pb collisions.
We determine the magnetic susceptibility of thermal QCD matter by means of first principles lattice simulations using staggered quarks with physical masses. A novel method is employed that only requires simulations at zero background field, thereby circumventing problems related to magnetic flux quantization. After a careful continuum limit extrapolation, diamagnetic behavior (negative susceptibility) is found at low temperatures and strong paramagnetism (positive susceptibility) at high temperatures. We revisit the decomposition of the magnetic susceptibility into spin- and orbital angular momentum- related contributions. The spin term — related to the normalization of the photon lightcone distribution amplitude at zero temperature — is calculated non-perturbatively and extrapolated to the continuum limit. Having access to both the full magnetic susceptibility and the spin term, we calculate the orbital angular momentum contribution for the first time. The results reveal the opposite of what might be expected based on a free fermion picture. We provide a simple parametrization of the temperature- and magnetic field-dependence of the QCD equation of state that can be used in phenomenological studies.
Thermal leptogenesis, in the framework of the standard model with three additional heavy Majorana neutrinos, provides an attractive scenario to explain the observed baryon asymmetry in the universe. It is based on the out-of-equilibrium decay of Majorana neutrinos in a thermal bath of standard model particles, which in a fully quantum field theoretical formalism is obtained by solving Kadanoff-Baym equations. So far, the leading two-loop contributions from leptons and Higgs particles are included, but not yet gauge corrections. These enter at three-loop level but, in certain kinematical regimes, require a resummation to infinite loop order for a result to leading order in the gauge coupling. In this work, we apply such a resummation to the calculation of the lepton number density. The full result for the simplest “vanilla leptogenesis” scenario is by O(1) increased compared to that of quantum Boltzmann equations, and for the first time permits an estimate of all theoretical uncertainties. This step completes the quantum theory of leptogenesis and forms the basis for quantitative evaluations, as well as extensions to other scenarios.
The production rates and the transverse momentum distribution of strange hadrons at mid-rapidity (|y|<0.5) are measured in proton-proton collisions at s√ = 13 TeV as a function of the charged particle multiplicity, using the ALICE detector at the LHC. The production rates of K0S, Λ, Ξ, and Ω increase with the multiplicity faster than what is reported for inclusive charged particles. The increase is found to be more pronounced for hadrons with a larger strangeness content. Possible auto-correlations between the charged particles and the strange hadrons are evaluated by measuring the event-activity with charged particle multiplicity estimators covering different pseudorapidity regions. When comparing to lower energy results, the yields of strange hadrons are found to depend only on the mid-rapidity charged particle multiplicity. Several features of the data are reproduced qualitatively by general purpose QCD Monte Carlo models that take into account the effect of densely-packed QCD strings in high multiplicity collisions. However, none of the tested models reproduce the data quantitatively. This work corroborates and extends the ALICE findings on strangeness production in proton-proton collisions at 7 TeV.
The study of (anti-)deuteron production in pp collisions has proven to be a powerful tool to investigate the formation mechanism of loosely bound states in high-energy hadronic collisions. In this paper the production of (anti-)deuterons is studied as a function of the charged particle multiplicity in inelastic pp collisions at s√=13 TeV using the ALICE experiment. Thanks to the large number of accumulated minimum bias events, it has been possible to measure (anti-)deuteron production in pp collisions up to the same charged particle multiplicity (dNch/dη∼26) as measured in p–Pb collisions at similar centre-of-mass energies. Within the uncertainties, the deuteron yield in pp collisions resembles the one in p–Pb interactions, suggesting a common formation mechanism behind the production of light nuclei in hadronic interactions. In this context the measurements are compared with the expectations of coalescence and statistical hadronisation models (SHM).
The invariant differential cross section of inclusive ω(782) meson production at midrapidity (|y|<0.5) in pp collisions at s√=7TeV was measured with the ALICE detector at the LHC over a transverse momentum range of 2<pT<17GeV/c. The ω meson was reconstructed via its ω→π+π−π0 decay channel. The measured ω production cross section is compared to various calculations: PYTHIA 8.2 Monash 2013 describes the data, while PYTHIA 8.2 Tune 4C overestimates the data by about 50%. A recent NLO calculation, which includes a model describing the fragmentation of the whole vector-meson nonet, describes the data within uncertainties below 6GeV/c, while it overestimates the data by up to 50% for higher pT. The ω/π0 ratio is in agreement with previous measurements at lower collision energies and the PYTHIA calculations. In addition, the measurement is compatible with transverse mass scaling within the measured pT range and the ratio is constant with Cω/π0=0.67±0.03~(stat)~±0.04~(sys)~ above a transverse momentum of 2.5GeV/c.
The measurement of the azimuthal-correlation function of prompt D mesons with charged particles in pp collisions at s√=5.02 TeV and p–Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector at the LHC is reported. The D0, D+, and D∗+ mesons, together with their charge conjugates, were reconstructed at midrapidity in the transverse momentum interval 3<pT<24 GeV/c and correlated with charged particles having pT>0.3 GeV/c and pseudorapidity |η|<0.8. The properties of the correlation peaks appearing in the near- and away-side regions (for Δφ≈0 and Δφ≈π, respectively) were extracted via a fit to the azimuthal correlation functions. The shape of the correlation functions and the near- and away-side peak features are found to be consistent in pp and p–Pb collisions, showing no modifications due to nuclear effects within uncertainties. The results are compared with predictions from Monte Carlo simulations performed with the PYTHIA, POWHEG+PYTHIA, HERWIG, and EPOS 3 event generators.
A measurement of charged hadron pair correlations in two-dimensional ηφ space is presented. The analysis is based on total 30 million central Be + Be collisions observed in the NA61/SHINE detector at the CERN SPS for incident beam momenta of 19A, 30A, 40A, 75A, and 150A GeV/c. Measurements were carried out for unlike-sign and like-sign charge hadron pairs independently. The C(η, φ) correlation functions were compared with results from a similar analysis on p + p interactions at similar beam momenta per nucleon. General trends of the backto-back correlations are similar in central Be + Be collisions and p + p interactions, but are suppressed in magnitude due to the increased combinatorial background. Predictions from the Epos and UrQMD models are compared to the measurements. Evolution of an enhancement around (η, φ) = (0, 0) with incident energy is observed in central Be + Be collisions. It is not predicted by both models and almost non-existing in proton–proton collisions at the same momentum per nucleon.
At the earliest times after a heavy-ion collision, the magnetic field created by the spectator nucleons will generate an extremely strong, albeit rapidly decreasing in time, magnetic field. The impact of this magnetic field may have detectable consequences, and is believed to drive anomalous transport effects like the Chiral Magnetic Effect (CME). We detail an exploratory study on the effects of a dynamical magnetic field on the hydrodynamic medium created in the collisions of two ultrarelativistic heavy-ions, using the framework of numerical ideal MagnetoHydroDynamics (MHD) with the ECHO-QGP code. In this study, we consider a magnetic field captured in a conducting medium, where the conductivity can receive contributions from the electromagnetic conductivity σ and the chiral magnetic conductivity σχ. We first study the elliptic flow of pions, which we show is relatively unchanged by the introduction of a magnetic field. However, by increasing the magnitude of the magnetic field, we find evidence for an enhancement of the elliptic flow in peripheral collisions. This effect is stronger at RHIC than the LHC, and it is evident already at intermediate collision centralities. Next, we explore the impact of the chiral magnetic conductivity on electric charges produced at the edges of the fireball. This initial σχ can be understood as a long-wavelength effective description of chiral fermion production. We then demonstrate that this chiral charge, when transported by the MHD medium, produces a charge dipole perpendicular to the reaction plane which extends a few units in rapidity. Assuming charge conservation at the freeze-out surface, we show that the produced charge imbalance can have measurable effects on some experimental observables, like v1 or ⟨sinϕ⟩. This demonstrates the ability of a MHD fluid to transport the signature of the initial chiral magnetic fields to late times. We also comment on the limitations of the ideal MHD approximation and detail how further development of a dissipative-resistive model can provide a more realistic description of the QGP.
The production of Ξ(1321)− and Ξ¯¯¯¯(1321)+ hyperons in inelastic p+p interactions is studied in a fixed target experiment at a beam momentum of 158 GeV/c. Double differential distributions in rapidity y and transverse momentum pT are obtained from a sample of 33M inelastic events. They allow to extrapolate the spectra to full phase space and to determine the mean multiplicity of both Ξ− and Ξ¯¯¯¯+. The rapidity and transverse momentum spectra are compared to transport model predictions. The Ξ− mean multiplicity in inelastic p+p interactions at 158 GeV/c is used to quantify the strangeness enhancement in A+A collisions at the same centre-of-mass energy per nucleon pair.
We explore some implications of our previous proposal, motivated in part by the Generalised Uncertainty Principle (GUP) and the possibility that black holes have quantum mechanical hair that the ADM mass of a system has the form M+βM2Pl/(2M), where M is the bare mass, MPl is the Planck mass and β is a positive constant. This also suggests some connection between black holes and elementary particles and supports the suggestion that gravity is self-complete. We extend our model to charged and rotating black holes, since this is clearly relevant to elementary particles. The standard Reissner–Nordström and Kerr solutions include zero-temperature states, representing the smallest possible black holes, and already exhibit features of the GUP-modified Schwarzschild solution. However, interesting new features arise if the charged and rotating solutions are themselves GUP-modified. In particular, there is an interesting transition below some value of β from the GUP solutions (spanning both super-Planckian and sub-Planckian regimes) to separated super-Planckian and sub-Planckian solutions. Equivalently, for a given value of β, there is a critical value of the charge and spin above which the solutions bifurcate into sub-Planckian and super-Planckian phases, separated by a mass gap in which no black holes can form.
The elliptic and triangular flow coefficients v2 and v3 of prompt D0, D+, and D∗+ mesons were measured at midrapidity (|y| < 0.8) in Pb–Pb collisions at the centre-of-mass energy per nucleon pair of √sNN = 5.02 TeV with the ALICE detector at the LHC. The D mesons were reconstructed via their hadronic decays in the transverse momentum interval 1 < pT < 36 GeV/c in central (0–10%) and semi-central (30–50%) collisions. Compared to pions, protons, and J/ψ mesons, the average D-meson vn harmonics are compatible within uncertainties with a mass hierarchy for pT 3 GeV/c, and are similar to those of charged pions for higher pT. The coupling of the charm quark to the light quarks in the underlying medium is further investigated with the application of the event-shape engineering (ESE) technique to the D-meson v2 and pT-differential yields. The D-meson v2 is correlated with average bulk elliptic flow in both central and semi-central collisions. Within the current precision, the ratios of per-event Dmeson yields in the ESE-selected and unbiased samples are found to be compatible with unity. All the measurements are found to be reasonably well described by theoretical calculations including the effects of charm-quark transport and the recombination of charm quarks with light quarks in a hydrodynamically expanding medium.
In the past two decades, pions created in the high density regions of heavy ion collisions have been predicted to be sensitive at high densities to the symmetry energy term in the nuclear equation of state, a property that is key to our understanding of neutron stars. In a new experiment designed to study the symmetry energy, the multiplicities of negatively and positively charged pions have been measured with high accuracy for central 132Sn+124Sn, 112Sn+124Sn, and 108Sn+112Sn collisions at E/A = 270 MeV with the SπRIT Time Projection Chamber. While individual pion multiplicities are measured to 4% accuracy, those of the charged pion multiplicity ratios are measured to 2% accuracy. We compare these data to predictions from seven major transport models. The calculations reproduce qualitatively the dependence of the multiplicities and their ratios on the total neutron and proton number in the colliding systems. However, the predictions of the transport models from different codes differ too much to allow extraction of reliable constraints on the symmetry energy from the data. This finding may explain previous contradictory conclusions on symmetry energy constraints obtained from pion data in Au+Au system. These new results call for still better understanding of the differences among transport codes, and new observables that are more sensitive to the density dependence of the symmetry energy.
The neutron capture cross section of 154Gd was measured from 1 eV to 300 keV in the experimental area located 185 m from the CERN n_TOF neutron spallation source, using a metallic sample of gadolinium, enriched to 67% in 154Gd. The capture measurement, performed with four C6D6 scintillation detectors, has been complemented by a transmission measurement performed at the GELINA time-of-flight facility (JRC-Geel), thus minimising the uncertainty related to sample composition. An accurate Maxwellian averaged capture cross section (MACS) was deduced over the temperature range of interest for s process nucleosynthesis modelling. We report a value of 880(50) mb for the MACS at kT = 30 keV, significantly lower compared to values available in literature. The new adopted 154Gd(n,γ) cross section reduces the discrepancy between observed and calculated solar s-only isotopic abundances predicted by s-process nucleosynthesis models.
The differential invariant yield as a function of transverse momentum (pT) of electrons from semileptonic heavy-flavour hadron decays was measured at midrapidity in central (0–10%), semi-central (30–50%) and peripheral (60–80%) lead–lead (Pb–Pb) collisions at √sNN = 5.02 TeV in the pT intervals 0.5–26 GeV/c (0–10% and 30–50%) and 0.5–10 GeV/c (60–80%). The production cross section in proton–proton (pp) collisions at √s = 5.02 TeV was measured as well in 0.5 < pT < 10 GeV/c and it lies close to the upper band of perturbative QCD calculation uncertainties up to pT = 5 GeV/c and close to the mean value for larger pT. The modification of the electron yield with respect to what is expected for an incoherent superposition of nucleon–nucleon collisions is evaluated by measuring the nuclear modification factor RAA. The measurement of the RAA in different centrality classes allows in-medium energy loss of charm and beauty quarks to be investigated. The RAA shows a suppression with respect to unity at intermediate pT, which increases while moving towards more central collisions. Moreover, the measured RAA is sensitive to the modification of the parton distribution functions (PDF) in nuclei, like nuclear shadowing, which causes a suppression of the heavy-quark production at low pT in heavy-ion collisions at LHC.
Since the start of its operation in 2001, based on an idea of Prof. Carlo Rubbia [1], the neutron time of-flight facility of CERN, n_TOF, has become one of the most forefront neutron facilities in the world for wide-energy spectrum neutron cross section measurements. Thanks to the combination of excellent neutron energy resolution and high instantaneous neutron flux available in the two experimental areas, the second of which has been constructed in 2014, n_TOF is providing a wealth of new data on neutron-induced reactions of interest for nuclear astrophysics, advanced nuclear technologies and medical applications. The unique features of the facility will continue to be exploited in the future, to perform challenging new measurements addressing the still open issues and long-standing quests in the field of neutron physics. In this document the main characteristics of the n_TOF facility and their relevance for neutron studies in the different areas of research will be outlined, addressing the possible future contribution of n_TOF in the fields of nuclear astrophysics, nuclear technologies and medical applications. In addition, the future perspectives of the facility will be described including the upgrade of the spallation target, the setup of an imaging installation and the construction of a new irradiation area.
Setup for the measurement of the 235U(n,f) cross section relative to n-p scattering up to 1 GeV
(2020)
The neutron induced fission of 235U is extensively used as a reference for neutron fluence measurements in various applications, ranging from the investigation of the biological effectiveness of high energy neutrons, to the measurement of high energy neutron cross sections of relevance for accelerator driven nuclear systems. Despite its widespread use, no data exist on neutron induced fission of 235U above 200 MeV. The neutron facility n_TOF offers the possibility to improve the situation. The measurement of 235U(n,f) relative to the differential n-p scattering cross-section, was carried out in September 2018 with the aim of providing accurate and precise cross section data in the energy range from 10 MeV up to 1 GeV. In such measurements, Recoil Proton Telescopes (RPTs) are used to measure the neutron flux while the fission events are detected and counted with dedicated detectors. In this paper the measurement campaign and the experimental set-up are illustrated.
The design and operation of innovative nuclear systems requires a better knowledge of the capture and fission cross sections of the Pu isotopes. For the case of capture on 242Pu, a reduction of the uncertainty in the fast region down to 8-12% is required. Moreover, aiming at improving the evaluation of the fast energy range in terms of average parameters, the OECD NEA High Priority Request List (HPRL) requests high-resolution capture measurements with improved accuracy below 2 keV. The current uncertainties also affect the thermal point, where previous experiments deviate from each other by 20%. A fruitful collaboration betwen JGU Mainz and HZ Dresden-Rossendorf within the EC CHANDA project resulted in a 242Pu sample consisting of a stack of seven fission-like targets making a total of 95(4) mg of 242Pu electrodeposited on thin (11.5 μm) aluminum backings. This contribution presents the results of a set of measurements of the 242Pu(n, γ) cross section from thermal to 500 keV combining different neutron beams and techniques. The thermal point was determined at the Budapest Research Reactor by means of Neutron Activation Analysis and Prompt Gamma Analysis, and the resolved (1 eV - 4 keV) and unresolved (1 - 500 keV) resonance regions were measured using a set of four Total Energy detectors at the CERN n_TOF-EAR1.
New measurements of the 7Be(n,α)4He and 7Be(n,p)7Li reaction cross sections from thermal to keV neutron energies have been recently performed at CERN/n_TOF. Based on the new experimental results, astrophysical reaction rates have been derived for both reactions, including a proper evaluation of their uncertainties in the thermal energy range of interest for big bang nucleosynthesis studies. The new estimate of the 7Be destruction rate, based on these new results, yields a decrease of the predicted cosmological 7Li abundance insufficient to provide a viable solution to the cosmological lithium problem.
The study of neutron-induced reactions on actinides is of considerable importance for the design of advanced nuclear systems and alternative fuel cycles. Specifically, 230Th is produced from the α-decay of 234U as a byproduct of the 232Th/233U fuel cycle, thus the accurate knowledge of its fission cross section is strongly required. However, few experimental datasets exist in literature with large deviations among them, covering the energy range between 0.2 to 25 MeV. In addition, the study of the 230Th(n,f) cross-section is of great interest in the research on the fission process related to the structure of the fission barriers. Previous measurements have revealed a large resonance at En=715 keV and additional fine structures, but with high discrepancies among the cross-section values of these measurements. This contribution presents preliminary results of the 230Th(n,f) cross-section measurements at the CERN n_TOF facility. The high purity targets of the natural, but very rare isotope 230Th, were produced at JRC-Geel in Belgium. The measurements were performed at both experimental areas (EAR-1 and EAR-2) of the n_TOF facility, covering a very broad energy range from thermal up to at least 100 MeV. The experimental setup was based on Micromegas detectors with the 235U(n,f) and 238U(n,f) reaction cross-sections used as reference.
We have measured the γ-rays following neutron capture on 240Pu and 244 Cm at the n_TOF facility at CERN with the Total Absorption Calorimeter (TAC) and with C6D6 organic scintillators. The TAC is made of 40 BaF2 crystals operating in coincidence and covering almost the entire solid angle. This allows to obtain information concerning the energy spectra and the multiplicity of the measured capture γ-ray cascades. Additional information is also obtained from the C6D6 detectors. We have analyzed the measured data in order to draw conclusions about the Photon Strength Functions (PSFs) of 241Pu and 245Cm below their neutron separation energies. The analysis has been performed by fitting the PSFs to the experimental results, using the differential evolution method, in order to find neutron capture cascades capable of reproducing at the same time a great variety of deposited energy spectra.
Neutron-induced fission cross sections of isotopes involved in the nuclear fuel cycle are vital for the design and safe operation of advanced nuclear systems. Such experimental data can also provide additional constraints for the adjustment of nuclear model parameters used in the evaluation process, resulting in the further development of fission models. In the present work, the 237Np(n,f) cross section was studied at the EAR2 vertical beam-line at CERN's n_TOF facility, over a wide range of neutron energies, from meV to MeV, using the time-of-flight technique and a set-up based on Micromegas detectors, in an attempt to provide accurate experimental data. Preliminary results in the 200 keV – 14 MeV neutron energy range as well as the experimental procedure, including a description of the facility and the data handling and analysis, will be presented.
Monte Carlo simulations and n-p differential scattering data measured with Proton Recoil Telescopes
(2020)
The neutron-induced fission cross section of 235U, a standard at thermal energy and between 0.15 MeV and 200 MeV, plays a crucial role in nuclear technology applications. The long-standing need of improving cross section data above 20 MeV and the lack of experimental data above 200 MeV motivated a new experimental campaign at the n_TOF facility at CERN. The measurement has been performed in 2018 at the experimental area 1 (EAR1), located at 185 m from the neutron-producing target (the experiment is presented by A. Manna et al. in a contribution to this conference). The 235U(n,f) cross section from 20 MeV up to about 1 GeV has been measured relative to the 1H(n,n)1H reaction, which is considered the primary reference in this energy region. The neutron flux impinging on the 235U sample (a key quantity for determining the fission events) has been obtained by detecting recoil protons originating from n-p scattering in a C2H4 sample. Two Proton Recoil Telescopes (PRT), consisting of several layers of solid-state detectors and fast plastic scintillators, have been located at proton scattering angles of 25.07° and 20.32°, out of the neutron beam. The PRTs exploit the ΔE-E technique for particle identification, a basic requirement for the rejection of charged particles from neutron-induced reactions in carbon. Extensive Monte Carlo simulations were performed to characterize proton transport through the different slabs of silicon and scintillation detectors, to optimize the experimental set-up and to deduce the efficiency of the whole PRT detector. In this work we compare measured data collected with the PRTs with a full Monte Carlo simulation based on the Geant-4 toolkit.
Feasibility, design and sensitivity studies on innovative nuclear reactors that could address the issue of nuclear waste transmutation using fuels enriched in minor actinides, require high accuracy cross section data for a variety of neutron-induced reactions from thermal energies to several tens of MeV. The isotope 241Am (T1/2= 433 years) is present in high-level nuclear waste (HLW), representing about 1.8 % of the actinide mass in spent PWR UOx fuel. Its importance increases with cooling time due to additional production from the β-decay of 241Pu with a half-life of 14.3 years. The production rate of 241 Am in conventional reactors, including its further accumulation through the decay of 241Pu and its destruction through transmutation/incineration are very important parameters for the design of any recycling solution. In the present work, the 241 Am(n,f) reaction cross-section was measured using Micromegas detectors at the Experimental Area 2 of the n_TOF facility at CERN. For the measurement, the 235U(n,f) and 238U(n,f) reference reactions were used for the determination of the neutron flux. In the present work an overview of the experimental setup and the adopted data analysis techniques is given along with preliminary results.
The (n, γ) cross sections of the gadolinium isotopes play an important role in the study of the stellar nucleosynthesis. In particular, among the isotopes heavier than Fe, 154Gd together with 152Gd have the peculiarity to be mainly produced by the slow capture process, the so-called s-process, since they are shielded against the β-decay chains from the r-process region by their stable samarium isobars. Such a quasi pure s-process origin makes them crucial for testing the robustness of stellar models in galactic chemical evolution (GCE). According to recent models, the 154Gd and 152Gd abundances are expected to be 15-20% lower than the reference un-branched s-process 150Sm isotope. The close correlation between stellar abundances and neutron capture cross sections prompted for an accurate measurement of 154Gd cross section in order to reduce the uncertainty attributable to nuclear physics input and eventually rule out one of the possible causes of present discrepancies between observation and model predictions. To this end, the neutron capture cross section of 154Gd was measured in a wide neutron energy range (from thermal up to some keV) with high resolution in the first experimental area of the neutron time-of-flight facility n_TOF (EAR1) at CERN. In this contribution, after a brief description of the motivation and of the experimental setup used in the measurement, the preliminary results of the 154Gd neutron capture reaction as well as their astrophysical implications are presented.
Accurate measurement of the standard 235U(n,f) cross section from thermal to 170 keV neutron energy
(2020)
An accurate measurement of the 235U(n,f) cross section from thermal to 170 keV of neutron energy has recently been performed at n_TOF facility at CERN using 6Li(n,t)4He and 10B(n,α)7Li as references. This measurement has been carried out in order to investigate a possible overestimation of the 235U fission cross section evaluation provided by most recent libraries between 10 and 30 keV. A custom experimental apparatus based on in-beam silicon detectors has been used, and a Monte Carlo simulation in GEANT4 has been employed to characterize the setup and calculate detectors efficiency. The results evidenced the presence of an overestimation in the interval between 9 and 18 keV and the new data may be used to decrease the uncertainty of 235U(n,f) cross section in the keV region.
The evolution of the traditional nuclear magic numbers away from the valley of stability is an active field of research. Experimental efforts focus on providing key spectroscopic information that will shed light into the structure of exotic nuclei and understanding the driving mechanism behind the shell evolution. In this work, we investigate the spin-orbit shell gap towards the neutron dripline. To do so, we employed (p,2p) quasi-free scattering reactions to measure the proton component of the state of 16,18,20C. The experimental findings support the notion of a moderate reduction of the proton spin-orbit splitting, at variance to recent claims for a prevalent magic number towards the neutron dripline.
Measurement of groomed jet substructure observables in p+p collisions at √s = 200 GeV with STAR
(2020)
In this letter, measurements of the shared momentum fraction (zg) and the groomed jet radius (Rg), as defined in the SoftDrop algorithm, are reported in p+p collisions at √s = 200 GeV collected by the STAR experiment. These substructure observables are differentially measured for jets of varying resolution parameters from R = 0.2 − 0.6 in the transverse momentum range 15 < pT,jet < 60 GeV/c. These studies show that, in the pT,jet range accessible at √s = 200 GeV and with increasing jet resolution parameter and jet transverse momentum, the zg distribution asymptotically converges to the DGLAP splitting kernel for a quark radiating a gluon. The groomed jet radius measurements reflect a momentum-dependent narrowing of the jet structure for jets of a given resolution parameter, i.e., the larger the pT,jet, the narrower the first splitting. For the first time, these fully corrected measurements are compared to Monte Carlo generators with leading order QCD matrix elements and leading log in the parton shower, and to state-of-the-art theoretical calculations at next-to-leading-log accuracy. We observe that PYTHIA 6 with parameters tuned to reproduce RHIC measurements is able to quantitatively describe data, whereas PYTHIA 8 and HERWIG 7, tuned to reproduce LHC data, are unable to provide a simultaneous description of both zg and Rg, resulting in opportunities for fine parameter tuning of these models for p+p collisions at RHIC energies. We also find that the theoretical calculations without non-perturbative corrections are able to qualitatively describe the trend in data for jets of large resolution parameters at high pT,jet, but fail at small jet resolution parameters and low jet transverse momenta.
Investigation of the linear and mode-coupled flow harmonics in Au+Au collisions at √sNN = 200 GeV
(2020)
Flow harmonics (vn) of the Fourier expansion for the azimuthal distributions of hadrons are commonly employed to quantify the azimuthal anisotropy of particle production relative to the collision symmetry planes. While lower order Fourier coefficients (v2 and v3) are more directly related to the corresponding eccentricities of the initial state, the higher-order flow harmonics (vn>3) can be induced by a modecoupled response to the lower-order anisotropies, in addition to a linear response to the same-order anisotropies. These higher-order flow harmonics and their linear and mode-coupled contributions can be used to more precisely constrain the initial conditions and the transport properties of the medium in theoretical models. The multiparticle azimuthal cumulant method is used to measure the linear and mode-coupled contributions in the higher-order anisotropic flow, the mode-coupled response coefficients, and the correlations of the event plane angles for charged particles as functions of centrality and transverse momentum in Au+Au collisions at nucleon-nucleon center-of-mass energy √sN N= 200 GeV. The results are compared to similar LHC measurements as well as to several viscous hydrodynamic calculations with varying initial conditions.
We report on the measurement of the size of the particle-emitting source from two-baryon correlations with ALICE in high-multiplicity pp collisions at √s = 13 TeV. The source radius is studied with low relative momentum p–p, p–p, p–, and p– pairs as a function of the pair transverse mass mT considering for the first time in a quantitative way the effect of strong resonance decays. After correcting for this effect, the radii extracted for pairs of different particle species agree. This indicates that protons, antiprotons, s, and s originate from the same source. Within the measured mT range (1.1–2.2) GeV/c2 the invariant radius of this common source varies between 1.3 and 0.85 fm. These results provide a precise reference for studies of the strong hadron–hadron interactions and for the investigation of collective properties in small colliding systems.
Multiplicity dependence of inclusive J/ψ production at midrapidity in pp collisions at √s = 13 TeV
(2020)
Measurements of the inclusive J/ψ yield as a function of charged-particle pseudorapidity density dNch/dη in pp collisions at √s = 13 TeV with ALICE at the LHC are reported. The J/ψ meson yield is measured at midrapidity (|y| < 0.9) in the dielectron channel, for events selected based on the charged-particle multiplicity at midrapidity (|η| < 1) and at forward rapidity (−3.7 < η < −1.7 and 2.8 < η < 5.1); both observables are normalized to their corresponding averages in minimum bias events. The increase of the normalized J/ψ yield with normalized dNch/dη is significantly stronger than linear and dependent on the transverse momentum. The data are compared to theoretical predictions, which describe the observed trends well, albeit not always quantitatively.
We report results on the total and elastic cross sections in proton-proton collisions at √s = 200 GeV obtained with the Roman Pot setup of the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). The elastic differential cross section was measured in the squared four-momentum transfer range 0.045 ≤ −t ≤ 0.135 GeV2. The value of the exponential slope parameter B of the elastic differential cross section dσ/dt ∼ e−Bt in the measured −t range was found to be B = 14.32 ± 0.09(stat.)+0.13 −0.28(syst.) GeV−2. The total cross section σtot, obtained from extrapolation of the dσ/dt to the optical point at −t = 0, is σtot = 54.67 ± 0.21(stat.)+1.28 −1.38(syst.) mb. We also present the values of the elastic cross section σel = 10.85 ± 0.03(stat.)+0..49 −0.41(syst.) mb, the elastic cross section integrated within the STAR t-range σ det el = 4.05 ± 0.01(stat.)+0.18−0.17(syst.) mb, and the inelastic cross section σinel = 43.82 ± 0.21(stat.)+1.37−1.44(syst.) mb. The results are compared with the world data
ϒ production in p–Pb interactions is studied at the centre-of-mass energy per nucleon–nucleon collision √sNN = 8.16 TeV with the ALICE detector at the CERN LHC. The measurement is performed reconstructing bottomonium resonances via their dimuon decay channel, in the centre-of-mass rapidity intervals 2.03 < ycms < 3.53 and −4.46 < ycms < −2.96, down to zero transverse momentum. In this work, results on the ϒ(1S) production cross section as a function of rapidity and transverse momentum are presented. The corresponding nuclear modification factor shows a suppression of the ϒ(1S) yields with respect to pp collisions, both at forward and backward rapidity. This suppression is stronger in the low transverse momentum region and shows no significant dependence on the centrality of the interactions. Furthermore, the ϒ(2S) nuclear modification factor is evaluated, suggesting a suppression similar to that of the ϒ(1S). A first measurement of the ϒ(3S) has also been performed. Finally, results are compared with previous ALICE measurements in p–Pb collisions at √sNN = 5.02 TeV and with theoretical calculations.
Multiplicity dependence of light (anti-)nuclei production in p–Pb collisions at √sNN =5.02 TeV
(2020)
The measurement of the deuteron and anti-deuteron production in the rapidity range −1 < y < 0 as a function of transverse momentum and event multiplicity in p–Pb collisions at √sNN = 5.02 TeV is presented. (Anti-)deuterons are identified via their specific energy loss dE/dx and via their time-offlight. Their production in p–Pb collisions is compared to pp and Pb–Pb collisions and is discussed within the context of thermal and coalescence models. The ratio of integrated yields of deuterons to protons (d/p) shows a significant increase as a function of the charged-particle multiplicity of the event starting from values similar to those observed in pp collisions at low multiplicities and approaching those observed in Pb–Pb collisions at high multiplicities. The mean transverse particle momenta are extracted from the deuteron spectra and the values are similar to those obtained for p and particles. Thus, deuteron spectra do not follow mass ordering. This behaviour is in contrast to the trend observed for non-composite particles in p–Pb collisions. In addition, the production of the rare 3He and 3He nuclei has been studied. The spectrum corresponding to all non-single diffractive p-Pb collisions is obtained in the rapidity window −1 < y < 0 and the pT-integrated yield dN/dy is extracted. It is found that the yields of protons, deuterons, and 3He, normalised by the spin degeneracy factor, follow an exponential decrease with mass number.
This paper presents the first measurements of the charge independent (CI) and charge dependent (CD) two-particle transverse momentum correlators GCI 2 and GCD 2 in Pb–Pb collisions at √sNN = 2.76 TeV by the ALICE collaboration. The two-particle transverse momentum correlator G2 was introduced as a measure of the momentum current transfer between neighboring system cells. The correlators are measured as a function of pair separation in pseudorapidity (Δη) and azimuth (Δφ) and as a function of collision centrality. From peripheral to central collisions, the correlator GCI 2 exhibits a longitudinal broadening while undergoing a monotonic azimuthal narrowing. By contrast, GCD 2 exhibits a narrowing along both dimensions. These features are not reproduced by models such as HIJING and AMPT. However, the observed narrowing of the correlators from peripheral to central collisions is expected to result from the stronger transverse flow profiles produced in more central collisions and the longitudinal broadening is predicted to be sensitive to momentum currents and the shear viscosity per unit of entropy density η/s of the matter produced in the collisions. The observed broadening is found to be consistent with the hypothesized lower bound of η/s and is in qualitative agreement with values obtained from anisotropic flow measurements.
The ALICE collaboration at the CERN LHC reports novel measurements of jet substructure in pp collisions at √s = 7 TeV and central Pb–Pb collisions at √sNN = 2.76 TeV. Jet substructure of track-based jets is explored via iterative declustering and grooming techniques. We present the measurement of the momentum sharing of two-prong substructure exposed via grooming, the zg, and its dependence on the opening angle, in both pp and Pb–Pb collisions. We also present the measurement of the distribution of the number of branches obtained in the iterative declustering of the jet, which is interpreted as the number of its hard splittings. In Pb–Pb collisions, we observe a suppression of symmetric splittings at large opening angles and an enhancement of splittings at small opening angles relative to pp collisions, with no significant modification of the number of splittings. The results are compared to predictions from various Monte Carlo event generators to test the role of important concepts in the evolution of the jet in the medium such as colour coherence.
This Letter presents the first direct investigation of the p–0 interaction, using the femtoscopy technique in high-multiplicity pp collisions at √s = 13 TeV measured by the ALICE detector. The 0 is reconstructed via the decay channel to Λγ, and the subsequent decay of Λ to pπ−. The photon is detected via the conversion in material to e+e− pairs exploiting the capability of the ALICE detector to measure electrons at low transverse momenta. The measured p–0 correlation indicates a shallow strong interaction. The comparison of the data to several theoretical predictions obtained employing the Correlation Analysis Tool using the Schrödinger Equation (CATS) and the Lednický–Lyuboshits approach shows that the current experimental precision does not yet allow to discriminate between different models, as it is the case for the available scattering and hypernuclei data. Nevertheless, the p–0 correlation function is found to be sensitive to the strong interaction, and driven by the interplay of the different spin and isospin channels. This pioneering study demonstrates the feasibility of a femtoscopic measurement in the p–0 channel and with the expected larger data samples in LHC Run 3 and Run 4, the p–0 interaction will be constrained with high precision.
The inclusive J/ψ meson production in Pb–Pb collisions at a center-of-mass energy per nucleon–nucleon collision of sNN=5.02 TeV at midrapidity (|y|<0.9) is reported by the ALICE Collaboration. The measurements are performed in the dielectron decay channel, as a function of event centrality and J/ψ transverse momentum pT, down to pT=0. The J/ψ mean transverse momentum 〈pT〉 and rAA ratio, defined as 〈pT2〉PbPb/〈pT2〉pp, are evaluated. Both observables show a centrality dependence decreasing towards central (head-on) collisions. The J/ψ nuclear modification factor RAA exhibits a strong pT dependence with a large suppression at high pT and an increase to unity for decreasing pT. When integrating over the measured momentum range pT<10 GeV/c, the J/ψ RAA shows a weak centrality dependence. Each measurement is compared with results at lower center-of-mass energies and with ALICE measurements at forward rapidity, as well as to theory calculations. All reported features of the J/ψ production at low pT are consistent with a dominant contribution to the J/ψ yield originating from charm quark (re)combination.
The striking similarities that have been observed between high-multiplicity proton-proton (pp) collisions and heavy-ion collisions can be explored through multiplicity-differential measurements of identified hadrons in pp collisions. With these measurements, it is possible to study mechanisms such as collective flow that determine the shapes of hadron transverse momentum (pT) spectra, to search for possible modifications of the yields of short-lived hadronic resonances due to scattering effects in an extended hadron-gas phase, and to investigate different explanations provided by phenomenological models for enhancement of strangeness production with increasing multiplicity. In this paper, these topics are addressed through measurements of the K∗(892)0 and φ(1020) mesons at midrapidity in pp collisions at √s = 13 TeV as a function of the charged-particle multiplicity. The results include the pT spectra, pT-integrated yields, mean transverse momenta, and the ratios of the yields of these resonances to those of longer-lived hadrons. Comparisons with results from other collision systems and energies, as well as predictions from phenomenological models, are also discussed.
Experimental results are presented on event-by-event net-proton fluctuation measurements in Pb–Pb collisions at √sNN = 2.76 TeV, recorded by the ALICE detector at the CERN LHC. These measurements have as their ultimate goal an experimental test of Lattice QCD (LQCD) predictions on second and higher order cumulants of net-baryon distributions to search for critical behavior near the QCD phase boundary. Before confronting them with LQCD predictions, account has to be taken of correlations stemming from baryon number conservation as well as fluctuations of participating nucleons. Both effects influence the experimental measurements and are usually not considered in theoretical calculations. For the first time, it is shown that event-by-event baryon number conservation leads to subtle long-range correlations arising from very early interactions in the collisions.
Two-particle correlation functions were measured for pp, p, p, and pairs in Pb–Pb collisions at √sNN = 2.76 TeV and √sNN = 5.02 TeV recorded by the ALICE detector. From a simultaneous fit to all obtained correlation functions, real and imaginary components of the scattering lengths, as well as the effective ranges, were extracted for combined p and p pairs and, for the first time, for pairs. Effective averaged scattering parameters for heavier baryon–antibaryon pairs, not measured directly, are also provided. The results reveal similarly strong interaction between measured baryon–antibaryon pairs, suggesting that they all annihilate in the same manner at the same pair relative momentum k∗. Moreover, the reported significant non-zero imaginary part and negative real part of the scattering length provide motivation for future baryon–antibaryon bound state searches.
Measurements of K∗(892)0 and φ(1020) resonance production in Pb–Pb and pp collisions at √sNN = 5.02 TeV with the ALICE detector at the Large Hadron Collider are reported. The resonances are measured at midrapidity (|y| < 0.5) via their hadronic decay channels and the transverse momentum (pT) distributions are obtained for various collision centrality classes up to pT = 20 GeV/c. The pT-integrated yield ratio K∗(892)0/K in Pb–Pb collisions shows significant suppression relative to pp collisions and decreases towards more central collisions. In contrast, the φ(1020)/K ratio does not show any suppression. Furthermore, the measured K∗(892)0/K ratio in central Pb–Pb collisions is significantly suppressed with respect to the expectations based on a thermal model calculation, while the φ(1020)/K ratio agrees with the model prediction. These measurements are an experimental demonstration of rescattering of K∗(892)0 decay products in the hadronic phase of the collisions. The K∗(892)0/K yield ratios in Pb–Pb and pp collisions are used to estimate the time duration between chemical and kinetic freeze-out, which is found to be ∼ 4–7 fm/c for central collisions. The pT-differential ratios of K∗(892)0/K, φ(1020)/K, K∗(892)0/π , φ(1020)/π , p/K∗(892)0 and p/φ(1020) are also presented for Pb–Pb and pp collisions at √sNN = 5.02 TeV. These ratios show that the rescattering effect is predominantly a low-pT phenomenon.
Accurate neutron capture cross section data for minor actinides (MAs) are required to estimate the production and transmutation rates of MAs in light water reactors with a high burnup, critical fast reactors like Gen-IV systems and other innovative reactor systems such as accelerator driven systems (ADS). Capture reactions of 244Cm open the path for the formation of heavier Cm isotopes and of heavier elements such as Bk and Cf. In addition, 244Cm shares nearly 50% of the total actinide decay heat in irradiated reactor fuels with a high burnup, even after three years of cooling.
Experimental data for this isotope are very scarce due to the difficulties of providing isotopically enriched samples and because the high intrinsic activity of the samples requires the use of neutron facilities with high instantaneous flux. The only two previous experimental data sets for this neutron capture cross section have been obtained in 1969 using a nuclear explosion and, more recently, at J-PARC in 2010. The neutron capture cross sections have been measured at n_TOF with the same samples that the previous experiments in J-PARC. The samples were measured at n_TOF Experimental Area 2 (EAR-2) with three C6D6 detectors and also in Experimental Area 1 (EAR-1) with the Total Absorption Calorimeter (TAC). Preliminary results assessing the quality and limitations of these new experimental datasets are presented for the experiments in both areas. Preliminary yields of both measurements will be compared with evaluated libraries for the first time.
233U is the fissile nuclei in the Th-U fuel cycle with a particularily small neutron capture cross setion which is on average about one order of magnitude lower than its fission cross section. Hence, the measurement of the 233U(n, γ) cross section relies on a method to accurately distinguish between capture and fission γ-rays. A measurement of the 233U α-ratio has been performed at the n_TOF facility at CERN using a so-called fission tagging setup, coupling n_TOF 's Total Absorption Calorimeter with a novel fission chamber to tag the fission γ-rays. The experimental setup is described and essential parts of the analysis are discussed. Finally, a preliminary 233U α-ratio is presented.
We have measured the capture cross section of the 155Gd and 157Gd isotopes between 0.025 eV and 1 keV. The capture events were recorded by an array of 4 C6D6 detectors, and the capture yield was deduced exploiting the total energy detection system in combination with the Pulse Height Weighting Techniques. Because of the large cross section around thermal neutron energy, 4 metallic samples of different thickness were used to prevent problems related to self-shielding. The samples were isotopically enriched, with a cross contamination of the other isotope of less than 1.14%. The capture yield was analyzed with an R-Matrix code to describe the cross section in terms of resonance parameters. Near thermal energies, the results are significantly different from evaluations and from previous time-of-flight experiments. The data from the present measurement at n_TOF are publicly available in the experimental nuclear reaction database EXFOR.
We use a set of hadronic equations of state derived from covariant density functional theory to study the impact of their high-density behavior on the properties of rapidly rotating Δ-resonance-admixed hyperonic compact stars. In particular, we explore systematically the effects of variations of the bulk energy isoscalar skewness, Qsat, and the symmetry energy slope, Lsym, on the masses of rapidly rotating compact stars. With models for equation of state satisfying all the modern astrophysical constraints, excessively large gravitational masses of around 2.5M⊙ are only obtained under three conditions: (a) strongly attractive Δ-resonance potential in nuclear matter, (b) maximally fast (Keplerian) rotation, and (c) parameter ranges Qsat≳500 MeV and Lsym≲50 MeV. These values of Qsat and Lsym have a rather small overlap with a large sample (total of about 260) parametrizations of covariant nucleonic density functionals. The extreme nature of requirements (a)-(c) reinforces the theoretical expectation that the secondary object involved in the GW190814 event is likely to be a low-mass black hole rather than a supramassive neutron star.
Neutron capture on 241Am plays an important role in the nuclear energy production and also provides valuable information for the improvement of nuclear models and the statistical interpretation of the nuclear properties. A new experiment to measure the 241Am(n, γ) cross section in the thermal region and the first few resonances below 10 eV has been carried out at EAR2 of the n_TOF facility at CERN. Three neutron-insensitive C6D6 detectors have been used to measure the neutron-capture gamma cascade as a function of the neutron time of flight, and then deduce the neutron capture yield. Preliminary results will be presented and compared with previously obtained results at the same facility in EAR1. In EAR1 the gamma-ray background at thermal energies was about 90% of the signal while in EAR2 is up to a 25 factor much more favorable signal to noise ratio. We also extended the low energy limit down to subthermal energies. This measurement will allow a comparison with neutron capture measurements conducted at reactors and using a different experimental technique.
J/ψ production as a function of charged-particle multiplicity in p-Pb collisions at √sNN = 8.16 TeV
(2020)
Inclusive J/ψ yields and average transverse momenta in p-Pb collisions at a center-of-mass energy per nucleon pair s NN $$ \sqrt{s_{\mathrm{NN}}} $$ = 8.16 TeV are measured as a function of the charged-particle pseudorapidity density with ALICE. The J/ψ mesons are reconstructed at forward (2.03 < y cms < 3.53) and backward (−4.46 < y cms < −2.96) center-of-mass rapidity in their dimuon decay channel while the charged-particle pseudorapidity density is measured around midrapidity. The J/ψ yields at forward and backward rapidity normalized to their respective average values increase with the normalized charged-particle pseudorapidity density, the former showing a weaker increase than the latter. The normalized average transverse momenta at forward and backward rapidity manifest a steady increase from low to high charged-particle pseudorapidity density with a saturation beyond the average value.
In the current dismal situation of the COVID-19 pandemic, effective management of patients with pneumonia and acute respiratory distress syndrome is of vital importance. Due to the current lack of effective pharmacological concepts, this situation has caused interest in (re)considering historical reports on the treatment of patients with low-dose radiation therapy for pneumonia. Although these historical reports are of low-level evidence per se, hampering recommendations for decision-making in the clinical setting, they indicate effectiveness in the dose range between 0.3 and 1 Gy, similar to more recent dose concepts in the treatment of acute and chronic inflammatory/degenerative benign diseases with, e.g., a single dose per fraction of 0.5 Gy. This concise review aims to critically review the evidence for low-dose radiation treatment of COVID-19 pneumopathy and discuss whether it is worth investigating in the present clinical situation.
Ionenstrahlen werden in der Grundlagenforschung, in der Industrie und der Medizin verwendet. Um die Teilchen für die jeweiligen Anforderungen nutzbar zu machen, werden sie mit Ionenbeschleunigern je nach Anwendung auf eine bestimmte Energie beschleunigt. Eine Beschleunigeranlage besteht dabei aus einer Reihe von unterschiedlichen Elementen: Ionenquellen, Linearbeschleuniger, Kreisbeschleuniger, Fokussierelemente, Diagnosesysteme usw. In jeder dieser Kategorien gibt es wiederum verschiedene Realisierungsmöglichkeiten, je nach Anforderung des jeweiligen Abschnitts und der gesamten Anlage. Im Bereich der Linearbeschleuniger ist als Bindeglied zwischen Ionenquelle/Niederenergiebereich und Nachfolgebeschleuniger der Radiofrequenzquadrupol (RFQ) weit verbreitet. Dieser kann den aus der Quelle kommenden Gleichstromstrahl in Teilchenpakete (Bunche) formen und diese gleichzeitig auf die nächste Beschleunigerstufe angepasst vorbeschleunigen. Desweiteren wird der Teilchenstrahl innerhalb des RFQ kontinuierlich fokussiert, wodurch insbesondere bei diesen niedrigen Energien Strahlverluste minimiert werden. Bei hohem Masse-zu-Ladungs-Verhältnis wird für schwere Ionen eine niedrige Resonanzfrequenz von deutlich unter 100 MHz benötigt. Dies führt zu längeren Beschleunigungszellen entlang der Elektroden, womit durch eine bessere Fokussierung auch höhere Strahlströme beschleunigt werden können. Im Allgemeinen bedeutet eine niedrigere Resonanzfrequenz aber auch einen größeren Querschnitt der Resonanzstruktur sowie einen längeren Beschleuniger. Gegenstand dieser Arbeit ist die Untersuchung unterschiedlicher RFQ-Strukturen für niedrige Frequenzen, wie sie beispielsweise im Linearbeschleunigerbereich der Gesellschaft für Schwerionenforschung (GSI) in Darmstadt Anwendung finden. Zunächst wird die Beschleunigeranlage des GSI Helmholtzzentrums für Schwerionenforschung in Darmstadt und dessen zur Zeit im Bau befindliche Erweiterung FAIR (Facility for Antiproton and Ion Research) kurz vorgestellt. Teil dieser Anlage ist der Hochstrominjektor genannte Anfangsbeschleuniger, der wiederum aus einem RFQ und zwei nachfolgenden Driftröhrenbeschleunigern besteht. Dieser Hochstrominjektor dient als Referenz für die vorliegende Arbeit. In Kapitel 3 wird kurz auf Linearbeschleuniger im Allgemeinen und auf das Grundprinzip und die Eigenschaften eines RFQ näher eingegangen. Anschließend werden verschiedene RFQ-Strukturkonzepte vorgestellt und die Strahldynamik in einem RFQ sowie charakteristische Resonatorgrößen beschrieben. Ausgangspunkt ist der aktuelle RFQ des Hochstrominjektors (Kapitel 4). Dieser IH-RFQ mit einer Betriebsfrequenz von 36 MHz ist seit vielen Jahren in Betrieb und soll für eine verbesserte Effizienz und Betriebssicherheit ein Upgrade erfahren. Dazu wurden Simulationen sowohl der bestehenden Struktur als auch mit Modifikationen durchgeführt und diese miteinander verglichen. Zur Entwicklung eines kompakten Resonators werden in Kapitel 5 verschiedene Splitring-RFQ-Modelle als Alternative zur IH-Struktur mittels Simulationen untersucht. Diese wurden für eine niedrigere Frequenz von 27 MHz entworfen, was der Frequenz des ursprünglichen Wideröe-Beschleunigers (Vorgänger des Hochstrominjektors HSI) entspricht und ebenso wie die 36 MHz des IH-RFQ eine Subharmonische der 108 MHz des Folgebeschleunigers ist. Abschließend wurde noch eine neue RFQ-Struktur, der Splitframe-RFQ, entworfen und untersucht. Auch dieser wurde für eine Frequenz von 27 MHz ausgelegt. Die Ergebnisse dieser Entwicklung, die eine Mischung aus einem Splitring- und einem klassischen 4-Rod-RFQ darstellt, befinden sich in Kapitel 6. Alle Feldsimulationen wurden mit dem Programm Microwave Studio von CST durchgeführt. Zusammenfassend werden die verschiedenen Konzepte anhand der charakteristischen Resonatorgrößen verglichen und ein Ausblick auf weiterführende Arbeiten gegeben.
High-pressure single-crystal to 20 GPa and powder diffraction measurements to 50 GPa, show that the structure of Pb2SnO4 strongly distorts on compression with an elongation of one axis. A structural phase transition occurs between 10 GPa and 12 GPa, with a change of space group from Pbam to Pnam. The resistivity decreases by more than six orders of magnitude when pressure is increased from ambient conditions to 50 GPa. This insulator-to-semiconductor transition is accompanied by a reversible appearance change from transparent to opaque. Density functional theory-based calculations show that at ambient conditions the channels in the structure host the stereochemically-active Pb 6s2 lone electron pairs. On compression the lone electron pairs form bonds between Pb2+ ions. Also provided is an assignment of irreducible representations to the experimentally observed Raman bands.
In situ investigation of membrane proteins is a challenging task. Previously we demonstrated that nitroxide labels combined with pulsed ESR spectroscopy is a promising tool for this purpose. However, the nitroxide labels suffer from poor stability, high background labeling, and low sensitivity. Here we show that Finland (FTAM) and OX063 based labels enable labeling of the cobalamin transporter BtuB and BamA, the central component of the β-barrel assembly machinery (BAM) complex, in E coli. Compared to the methanethiosulfonate spin label (MTSL), trityl labels eliminated the background signals and enabled specific in situ labeling of the proteins with high efficiency. The OX063 labels show a long phase memory time (TM) of ≈5 μs. All the trityls enabled distance measurements between BtuB and an orthogonally labeled substrate with high selectivity and sensitivity down to a few μm concentration. Our data corroborate the BtuB and BamA conformations in the cellular environment of E. coli.
This paper explores the many interesting implications for oscillator design, with optimized phase-noise performance, deriving from a newly proposed model based on the concept of oscillator conjugacy. For the case of 2-D (planar) oscillators, the model prominently predicts that only circuits producing a perfectly symmetric steady-state can have zero amplitude-to-phase (AM-PM) noise conversion, a so-called zero-state. Simulations on standard industry oscillator circuits verify all model predictions and, however, also show that these circuit classes cannot attain zero-states except in special limit-cases which are not practically relevant. Guided by the newly acquired design rules, we describe the synthesis of a novel 2-D reduced-order LC oscillator circuit which achieves several zero-states while operating at realistic output power levels. The potential future application of this developed theoretical framework for implementation of numerical algorithms aimed at optimizing oscillator phase-noise performance is briefly discussed.
We report here the in-cell NMR-spectroscopic observation of the binding of the cognate ligand 2′-deoxyguanosine to the aptamer domain of the bacterial 2′-deoxyguanosine-sensing riboswitch in eukaryotic cells, namely Xenopus laevis oocytes and in human HeLa cells. The riboswitch is sufficiently stable in both cell types to allow for detection of binding of the ligand to the riboswitch. Most importantly, we show that the binding mode established by in vitro characterization of this prokaryotic riboswitch is maintained in eukaryotic cellular environment. Our data also bring important methodological insights: Thus far, in-cell NMR studies on RNA in mammalian cells have been limited to investigations of short (<15 nt) RNA fragments that were extensively modified by protecting groups to limit their degradation in the intracellular space. Here, we show that the in-cell NMR setup can be adjusted for characterization of much larger (≈70 nt) functional and chemically non-modified RNA.
We explore the tilted-pulse-front excitation technique to control the superradiant emission of terahertz (THz) pulses from large-area photonconductive semiconductor switches. Two cases are studied. First, a photoconductive antenna emitting into free space, where the propagation direction of the optically generated THz beam is controlled by the choice of the tilt angle of the pump pulse front. Second, a THz waveguide structure with an integrated photoconductive window for the generation of THz radiation, where the injection of the THz radiation into a waveguide mode is optimized by the pulse front tilt. By providing long interaction lengths, such a waveguide-based optical-pump/THz-probe set-up may provide a new platform for the study of diverse short-lived optically induced excitations.
Während den ersten Mikrosekunden nach dem Urknall glaubt man, dass unser Universum aus einer heißen, dichten und stark wechselwirkenden Materie bestanden haben soll, welche man das Quark-Gluonen-Plasma (QGP) nennt.
In diesem Medium sind die elementaren Bausteine der Materie, die Quarks und die Gluonen, nicht mehr in Hadronen gebunden, sondern können sich stattdessen wie quasi-freie Teilchen verhalten.
Für die ALICE Kollaboration an CERN's Large Hadron Collider (LHC) ist die Untersuchung dieses Mediums eines der Hauptziele. Um dieses Medium im Labor zu erzeugen, werden Protonen und Nukleonen auf nahezu Lichtgeschwindigkeit beschleunigt und anschließend zur Kollision gebracht. Dabei werden Schwerpunktsenergien von bis zu 13 TeV bei Proton-Proton (pp) Kollisionen und bis zu 5.02 TeV bei Blei-Blei (Pb--Pb) Kollisionen erreicht.
Bei solchen hochenergetischen Kollisionen werden die kritischen Werte der Energiedichte und Temperatur von jeweils ungefähr 1 GeV/c und undgefähr 155 MeV überschritten, welche mithilfe von "lattice QCD" bestimmt wurden. Sie bieten daher die perfekten Voraussetzungen für einen Phasenübergang von normaler Materie zu einem QGP.
Die Entwicklung eines solchen Mediums, beginnend bei der eigentlichen Kollision, gefolgt von der Ausbildung des Plasmas und der letztendlichen Hadronisierung, kann jedoch nicht direkt untersucht werden, da das Plasma eine extrem kurze Lebensdauer hat.
Die Studien die das QGP untersuchen möchten, müssen sich deshalb auf Teilchenmessungen und deren Veränderung aufgrund von Einflüssen durch das Medium beschränken.
Es ist noch nicht definitiv geklärt, ob sich ein QGP nur in Kollisionen schwerer Ionen bildet, oder ob dies auch in kleineren Kollisionssystemen wie Proton-Proton oder Proton-Blei der Fall ist.
Damit in dieser Thesis Einschränkungen bezüglich einer möglichen Erzeugung eines mini-GQP in kleinen Kollisionssystemen gemacht werden kann, wird der Fokus auf Messungen von neutralen Pionen und Eta Mesonen mit dem ALICE Detektor am CERN LHC gesetzt. Hierfür wird in einem Referenzsystem von Proton-Proton Kollisionen bei sqrt(s)=8 TeV und in einem Proton-Blei (p--Pb) System bei sqrt(sNN)=8.16 TeV, welches eine nukleare Modifikation erfährt, gemessen und die Ergebnisse verglichen.
Da in Proton-Proton Kollisionen die Bildung eines QGP, aufgrund zu geringer Energiedichte, nicht erwartet wird, dient eine Messung in diesem System als Messbasis, um Effekte der Kollision selbst von Effekten nach der Kollision zu separieren, welche die Teilchenproduktion beeinflussen.
Teilchen können zusätzlich zu dem QGP auch mit kalter Kernmaterie interagieren, was sich in asymmetrischen Proton-Blei Kollisionen testen lässt. In diesem Kollisionssystem wird größtenfalls ein vergleichsweise kleines QGP gebildet, wohingegen das Blei Ion selbst als kalte Kernmaterie agieren kann.
Zusätzlich zu den Mesonenmessungen wird in dieser Thesis auch die Erzeugung von direkten Photonen bei niedrigen Transversalimpulsen (pT) in multiplizitätsabhängigen p--Pb Kollisionen bei einer Schwerpunktsenergie von sNN=5.02 TeV gemessen, welche als direkte Probe, sowie als charakteristisches Signal des QGP gilt.
Die neutralen Pionen, welche in dieser Thesis gemessen werden, kann man als einen Überlagerungszustand der zwei leichtesten Quarksorten, dem "up" (u) und dem "down" (d) Quark, sowie deren entsprechenden Anti-Teilchen verstehen.
Das eta meson hingegen hat einen zusätzlichen Anteil des "strange" Quarks und eine resultierende höhere Masse.
Quarks sind Teil des Standardmodells der Teilchenphysik, welches die Elementarteilchen und die zwischen ihnen wirkenden Elementarkräfte, ausgeübt durch Bosonen, beschreibt.
Das Modell umfasst insgesamt sechs Quarks, welche sich durch ihre Masse und Ladung unterscheiden und als Grundbestandteil von gebundenen Zuständen, sogenannten Hadronen, fungieren.
Die "up" und "down" Quarks gelten hierbei als die leichtesten Quarks und kommen daher am häufigsten in der Natur vor. Das bekannteste Beipiel stellen hier die allgemein bekannten Protonen (uud) und Neutronen (udd) dar, welche die Grundkomponenten von Nukleonen sind.
Die restlichen Quarks tragen eine deutlich höhere Masse und haben daher eine große Tendenz, sich in leichtere Quarks umzuwandeln, wodurch ihre Lebensdauer sehr gering ist. Die "top" und "bottom" Quarks, welche die Schwersten sind, können daher nicht in gewöhnlicher Materie gefunden werden.
Sie können jedoch experimentell durch hoch energetische Teilchenkollisionen erzeugt werden und indirekt über ihre Zerfallsprodukte nachgewiesen werden.
Quarks tragen eine elektrische Ladung von entweder 1/3 oder 2/3, sowie eine Farbladung, wobei Letztere verantwortlich für ihre Bindung in Hadronen ist.
Hadronen bestehen entweder aus drei Quarks, dann werden sie Baryonen genannt, oder aus einem Quark-Antiquark Paar, welches Meson genannt wird.
Diese gebundenen Zustände erfüllen eine insgesamt neutrale Farbladung, sowie eine vollzählige elektrische Ladung.
Des Weiteren gibt es auch exotische Penta-Quark Zustände, welche aus vier Quarks und einem Antiquark bestehen und bereits experimentell nachgewiesen wurden.
Aufgrund der starken Wechselwirkung, welche durch Gluonen vermittelt wird, können Quarks nicht einzeln beobachtet werden.
...
This article demonstrates the use of guided elastic waves (GEW) for multiple-in and multiple-out (MIMO) data communication in the framework of a structural health monitoring (SHM) system. Therefore, miniaturized low-voltage communication nodes have been developed. They are arranged in a spatially distributed and permanently installed network. Wireless exchange of encoded information across a metallic plate and a stiffened carbon-fiber reinforced plastics (CFRP) structure is investigated. A combination of square-wave excitation sequences and frequency-division multiplexing (FDM) is explored for parallel communication with multiple nodes. Moreover, the impact of the excitation-sequence length on the reliability of information transmission is studied in view of future energy-aware application scenarios. The presented system achieves in both studied structures error-free transmission at a data rate of 0.17 kbps (per carrier frequency) with a power consumption of 224 mW.
The requirement of the versatile signal generator has always been evident in modern RF and communication systems. The most conventional technique, voltage control oscillator (VCO), has inferior phase noise and narrow bandwidth despite its operating frequency can be up to the sub-THz regime. Its phase noise influenced by a various parameter associated with the oscillator circuit e.g. transistor size \& noise, bias current, noise leaking from the bias supply etc. The bandwidth is limited because the input voltage \& the output frequency of the VCO is not strictly linear over the tuning range. The phase noise and SFDR of the VCO output are enhanced by using the phase-lock technique. The phase-locked loop (PLL) uses the feedback system locking the reference frequency set by the VCO. However, the settling time of the PLL is higher due to a feedback control loop. The higher settling time increases the frequency switching time between PLL outputs. IG-oscillators is suitable for multi-GHz range and wide bandwidth application. Signal generation can alos be achieved by the free-electron radiation, optical lasers, Gunn diodes as well and they can operate even at the THz domain. All these signal generators suffer from slow frequency switching, lack of digital controllability, and advance modulation capability even though their frequency of operation is THz regime. Alternatively, the AWG (arbitrary wave generator) can produce a wide range of frequencies with low phase noise, including digital controllability. One of the vital components of the AWG is the direct digital synthesiser (DDS). Generally, it is composed of a phase accumulator, digital to analogue converter, sine mapping circuits and low pass filter. It needs a reference clock that acts as samples of the DDS outputs. Its output frequency can be varied by applying an appropriate digital input code. But high-speed DDS has several limitations; such as low number of output frequency points, lack of phase control unit, high power consumptions etc. This work addresses such limitations.
Diese Thesis befasst sich mit dem Problem korrelierter Elektronensysteme in realen Materialien. Ausgangspunkt hierbei ist die quantenmechanische Beschreibung dieser Systeme im Rahmen der sogenannten Kohn-Scham Dichtefunktionaltheorie, welche die Elektronen der Kristallsysteme als effektiv nicht-wechselwirkende Teilchen beschreibt.
Während diese Modellierung im Falle vieler Materialklassen erfolgreich ist, unterscheiden sich die korrelierten Elektronensysteme dadurch, dass der kollektive Charakter der Elektronendynamik nicht zu vernachlässigen ist.
Um diese Korrelationseffekte genauer zu untersuchen, verwenden wir in dieser Arbeit das Hubbard-Modell, welches mit der projektiven Wannierfunktionsmethode aus der Kohn-Scham Dichtefunktionaltheorie konstruiert werden kann.
Das Hubbard-Modell umfasst hierbei nur die lokale Elektron-Elektron-Wechselwirkung auf einem Gitter. Auch wenn das Modell augenscheinlich sehr simpel ist, existieren exakte Lösungen nur in bestimmten Grenzfällen. Dies macht die Entwicklung approximativer Ansätze erforderlich, wobei die Weiterentwicklung der sogenannten Two-Particle Self-Consistent Methode (TPSC) eine zentrale Rolle dieser Arbeit einnimmt.
Bei TPSC handelt es sich um eine Vielteilchenmethode, die in der Sprache funktionaler Ableitungen und sogenannter conserving approximations hergeleitet werden kann.
Der zentrale Gedanke dabei ist, den effektiven Wechselwirkungsvertex als statisch und lokal zu approximieren. Dies wiederum erlaubt die Bewegungsgleichung des Systems
erheblich zu vereinfachen, sodass eine numerische approximative Lösung des Hubbard-Modells möglich wird. Vorsetzung hierbei ist nur, dass sich das System in der normalleitenden Phase befindet und die bei Phasenübergängen entstehenden Fluktuationen nicht zu groß sind.
Während diese Methode ursprünglich von Y. M. Vilk und A.-M. Tremblay für das Ein-Orbital Hubbard-Modell entwickelt wurde, stellen wir in dieser Arbeit eine Erweiterung auf Viel-Orbital-Systeme vor.
Im Falle mehrerer Orbitale treten in der TPSC-Herleitung einzelne Komplikationen auf, die mit weiteren Approximationen behandelt werden müssen. Diese werden anhand eines einfachen Zwei-Orbital Modell-Systems diskutiert und die TPSC-Ergebnisse werden darüber hinaus mit den Ergebnissen der etablierten dynamischen Molekularfeldnährung verglichen.
In diesem Zusammenhang werden auch mögliche zukünftige Erweiterungen bzw. Verbesserungen von TPSC diskutiert.
Ein weiterer wichtiger Aspekt ist die Anwendung von TPSC auf reale Materialien.
In diesem Zusammenhang werden in dieser Arbeit die supraleitenden Eigenschaften der organischen K-(ET)2X Systeme untersucht. Hierbei lassen die TPSC-Resultate darauf schließen, dass das populäre Dimer-Modell, welches zur Beschreibung dieser Materialien herangezogen wird, nicht genügt um die experimentell bestimmten kritischen Temperaturen zu erklären und dass das komplexere Molekülmodell weitere exotische supraleitende Lösungen zulässt.
Schließlich untersuchen wir außerdem die elektronischen Eigenschaften des eisenbasierten Supraleiters LiFeAs und diskutieren inwieweit nicht-lokale Korrelationseffekte, welche durch TPSC aufgelöst werden können, die experimentellen Daten reproduzieren.
This dissertation presents the development of a new radio frequency quadrupole (RFQ) structure of the 4-rod type with an operating frequency of 108 MHz for the acceleration of heavy ions with mass-to-charge ratios of up to 8.5 at high duty cycles up to CW operation ("continuous wave") at the High Charge Injector (HLI) of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt.
The need to develop a completely new RFQ for the HLI arises from the fact that with the previously designed and built 4-rod RFQ structure, which was commissioned at the HLI in 2010 as part of the planned HLI upgrade program, the desired operating modes in both pulsed and CW operation could not be achieved even after several years of operating experience and considerable efforts to eliminate or at least mitigate the severe operational instabilities. Mechanical vibrations of the electrodes, which result in strong modulated power reflection, as well as the high thermal sensitivity proved to be particularly problematic.
In addition to the RF design of the new RFQ by simulations performed with the CST Microwave Studio software, the focus of the investigations fell on the mechanical analysis of vibrations on the electrode rods caused by RF operation, for which the ANSYS Workbench software was used. Due to the high thermal load of the RFQ structure of more than 30 kW/m in CW operation, an accurate analysis of the thermal effects on electrode deformation as well as resulting frequency detuning of the resonator is also required, which was investigated by simulations within the capabilities of CST Mphysics Studio.
Based on the results of the design studies carried out by simulations and the thereby achieved design optimizations, a 4-rod RFQ prototype with 6 stems was finally manufactured, on which most of the properties expected from the simulations could be validated by measurements of the RF characteristics as well as of the vibration behavior.
Finally, based on the results of the pre-tests and considering a newly developed beam dynamics concept, a completely revised RF design for a new full-length HLI-RFQ was derived from the prototype design.
Die vorliegende Arbeit beschreibt die Erzeugung und Charakterisierung verschiedenartiger piezoresistiver Dünnschichten für die Druck- und Dehnungssensorik bei hohen Temperaturen, die mittels Sputterdeposition abgeschieden werden:
- metallische Schichten aus Chrom mit Verunreinigungen aus Sauerstoff, Stickstoff oder Platin,
- granulare Keramik-Metall-Schichten (Cermets), mit Platin oder Nickel als Metallkomponente und Aluminiumoxid (Al2O3) oder Bornitrid (BN) als Keramikkomponente.
Beide Schichttypen können mit geeigneten Beschichtungsparametern erhebliche piezoresistive Effekte aufweisen, also einen Widerstands-Dehnungs-Effekt, der den von typischen Metallschichten um ein Mehrfaches übersteigt. Der Effekt wird quantifiziert durch den k-Faktor, der die relative Änderung des Widerstands R auf die relative Änderung der Länge l, d.h. die Dehnung ε=Δl/l, bezieht: k=ΔR/(R ε).
In Beschichtungsreihen werden die Schichtzusammensetzung und die Depositionsbedingungen variiert und die Auswirkungen auf den elektrischen Widerstand, dessen Temperaturkoeffizienten (TKR), sowie den k-Faktor untersucht. Die k-Faktoren der chrombasierten Schichten liegen bei 10 bis 20 mit um null einstellbarem TKR. Die Cermet-Schichten erreichen je nach Material k-Faktoren von 7 bis über 70 mit meist stark negativen TKR von mehreren -0,1 %/K.
Die Chrom- und Chrom-Stickstoff-Schichten erweisen sich als geeignete Sensorschichten für Membran-Drucksensoren. Daher wird eine Reihe von Sensoren mit Wheatstone-Messbrücken erzeugt und charakterisiert. Sie zeigen den hohen k-Faktoren entsprechende hohe Signalspannen. Die guten Sensoreigenschaften bleiben auch bei hohen Temperaturen bis 230 °C erhalten.
Nach den ersten Untersuchungen bei Dehnungen bis maximal 0,1 % wird zusätzlich das Verhalten der Schichten bei höheren Dehnungen bis 1,4 % untersucht. Es zeigt sich vorwiegend ein lineares Widerstands-Dehnungs-Verhalten. Die Leiterbahnen der spröden chrombasierten Schichten werden bei Dehnungen um 0,7 % jedoch durch Risse zerstört, die sich von den Rändern der Schicht her ausbreiten.
Die Platin-Aluminiumoxid-Schicht zeigt einen enorm großen, nichtlinearen Widerstands-Dehnungs-Effekt, der auf Risse zurückgeführt werden kann, die sich nach einigen Belastungszyklen reproduzierbar öffnen und schließen.
Tieftemperaturmessungen von 2 bis 300 K zeigen Widerstandsminima der Chrom-Stickstoff-Schichten; Magnetwiderstandsmessungen deuten jedoch nicht auf den Kondo-Effekt hin.
Die Cermet-Schichten zeigen thermisch aktivierte Leitfähigkeit.
Ausgewählte Schichten werden bei Temperaturen bis 420 °C (693 K) charakterisiert. Die chrombasierten Schichten haben bei hohen Temperaturen stabile Widerstände, zeigen jedoch stark nichtlineare Temperaturverläufe von Widerstand und k-Faktor. Oberhalb einer gewissen Temperatur verschwindet der piezoresistive Effekt, kehrt jedoch beim Abkühlen zurück. Die Verläufe lassen sich durch die Schichtzusammensetzung und auch durch Temperaturbehandlungen modifizieren.
Die Platin-Aluminiumoxid-Schicht ist ebenfalls temperaturstabil und zeigt geringe Änderungen des k-Faktors im Temperaturverlauf. Platin-Bornitrid zeigt große, reversible Widerstandsänderungen bei höheren Temperaturen, die auf mögliche Gaseinlagerungen hindeuten.
Aus den experimentellen Ergebnissen lassen sich die Ursachen der Piezoresistivität ableiten: Die chrombasierten Schichten bilden, wie in der Literatur vielfach beschrieben, unterhalb einer Ordnungstemperatur einen Spindichtewellen-Antiferromagnetismus aus. Dieser Zustand führt zu einem zusätzlichen Widerstandsbeitrag, der die beschriebenen Nichtlinearitäten der Widerstands-Temperatur-Verläufe verursacht und zudem empfindlich auf mechanische Dehnung reagiert und so zu erhöhten k-Faktoren führt.
Die Piezoresistivität der Cermet-Schichten resultiert aus der granularen Struktur, in der Ladungsträger zwischen Metallpartikeln tunneln. Mit exponentiell vom Partikelabstand abhängigen Widerständen der Tunnelübergänge resultieren hohe k-Faktoren. Mithilfe von Modellbetrachtungen, in denen Gleichungen für Tunnelwiderstände auf granulare Systeme angewendet werden, werden die experimentellen Ergebnisse diskutiert. Die Ergebnisse deuten darauf hin, dass sich die Eigenschaften der Keramik vorrangig auf den Betrag der k-Faktoren auswirken und die Eigenschaften des Metalls vor allem den TKR beeinflussen.
Für die vorliegende Arbeit wurden zur Analyse des Auger-Zerfalls kleiner Moleküle nach Photoionisation die aus der Zerfallsreaktion resultierenden Impuls- und Energiespektren von Photo- und Auger-Elektronen in Koinzidenz mit denen der ionischen Fragmente aufgenommen. Dies ermöglichte eine getrennte Betrachtung der während des Ionisationsschrittes und des Zerfallsschrittes dieses Prozesses besetzten Molekülzustände. Um weitere Einsicht in die Dynamik des Zerfalls zu erhalten, wurden vorhandene theoretische Modelle, welche insbesondere die Interaktion der durch die Reaktion produzierten geladenen Teilchen (Post Collision Interaction) einbeziehen, an die gemessenen Energiespektren angepasst. Dies ermöglichte die separate Betrachtung der im Ionisationsschritt besetzten Molekülzustände. So konnten die Emissionswinkelverteilungen der Photoelektronen im molekülfesten Koordinatensystem für jeden besetzten Anfangszustand einzeln betrachtet werden. Die Trennung der Endzustände des Zerfalls erfolgte über die Analyse des Spektrums der Ionen-Aufbruchsenergie (Kinetic Energy Release) und den Vergleich mit berechneten Potentialkurven der beitragenden Endzustände.
Durch die nach den Anfangszuständen separierte Betrachtung des Auger-Zerfalls wurde es auch möglich, die Auswirkungen dieser Zustände auf die Zerfallsdynamik zu analysieren. Dafür lieferte die Anpassung der Modellprofile die Lebensdauer des jeweiligen 1s-Lochzustandes in dem entsprechenden Zerfallskanal. Diese jeweiligen Lebensdauern eines jeden Zustandes wurden abhängig von verschiedenen Parametern mit einer Genauigkeit im Attosekunden-Bereich aus den Energiespektren der Photoelektronen ermittelt.
In the last two decades, new unpredicted charmonium-like states with extraordinary characteristics have been observed experimentally. These states also known as the XYZ states, e.g., the Y(4260) or the X(3872), are mostly interpreted as QCD allowed exotic hadrons. One of the leading hadron physics experiments in the world, the Beijing Electron Spectrometer III (BESIII) at the Beijing Electron-Positron Collider II (BEPCII) is aiming towards revealing the internal structure of these states. It has brought numerous breakthrough discoveries including the discovery of the charged Zc(3900). In order to understand the nature of the Y(4260) state and its decay patterns, an inclusive analysis is performed for different recoil systems (π+π−,K+K− and K±π∓) using the BESIII data samples for center of mass energies above 4 GeV collected between 2013 and 2019. The aim of this analysis is twofold: on one hand, we search for new unobserved charmonium-like decay channels using the missing mass technique and on the other hand, it provides an accurate inclusive cross section measurement for e+e−→X π+π−, with the X being the J/ψ, hc and ψ(2S), respectively. Two resonant structures, the Y(4220) and the Y(4390), are observed in the inclusive energy dependent Born cross section of e+e−→hc π+π−, which is consistent with the BESIII exclusive measurements. Moreover, the energy dependent cross section of e+e−→J/ψ π+π− is investigated, in which two resonances have consistently been observed with the previous BESIII exclusive studies, namely, the Y(4220) and the Y(4320). In the (K±π±) recoil system, possible Y(4260) open charm decay channels are investigated. Two enhancements are observed in the inclusive energy dependent cross section of e+e−→DD above 4.13GeV, which could possibly be the ψ(4160)and the ψ(4415).
Cornelius Krellner, Physiker
(2020)
In this paper we present first-order reversal curve (FORC) diagrams of ensembles of three-dimensional Co3Fe nanostructures as 2 × 2 arrays of nano-cubes and nano-trees. The structures are fabricated and investigated by an advanced platform of focused electron beam induced deposition combined with high-resolution detection of magnetic stray fields using a home-built micro-Hall magnetometer based on an AlGaAs/GaAs heterostructure. The experimental FORC diagrams are compared to macrospin simulations for both geometries at different angles of the externally applied magnetic field. The measured FORC diagrams are in good agreement with the simulated ones and reflect non-uniform magnetization reversal dominated by multi-vortex states within, and strong magnetic coupling between, the building blocks of our nanostructures. Thus, a FORC analysis of small arrays of 3D magnetic nanostructures provides more detailed insights into the mechanisms of magnetization reversal beyond standard major hysteresis loop measurements.
A model for the description of proton collisions from molecules composed of atoms such as hydrogen, carbon, nitrogen, oxygen and phosphorus (H, C, N, O, P) was recently extended to treat collisions with multiply charged ions with a focus on net ionization. Here we complement the work by focusing on net capture. The ion–atom collisions are computed using the two-center basis generator method. The atomic net capture cross sections are then used to assemble two models for ion–molecule collisions: An independent atom model (IAM) based on the Bragg additivity rule (labeled IAM-AR), and also the so-called pixel-counting method (IAM-PCM) which introduces dependence on the orientation of the molecule during impact. The IAM-PCM leads to significantly reduced capture cross sections relative to IAM-AR at low energies, since it takes into account the overlap of effective atomic cross sectional areas. We compare our results with available experimental and other theoretical data focusing on water vapor (H2O), methane (CH4) and uracil (C4H4N2O2). For the water molecule target we also provide results from a classical-trajectory Monte Carlo approach that includes dynamical screening effects on projectile and target. For small molecules dominated by a many-electron atom, such as carbon in methane or oxygen in water, we find a saturation phenomenon for higher projectile charges (q=3) and low energies, where the net capture cross section for the molecule is dominated by the net cross section for the many-electron atom, and the net capture cross section is not proportional to the total number of valence electrons.
The small photoreceptor Photoactive Yellow Protein (PYP) enters a reversible photocycle after excitation with blue light. The intermediate states are formed on timescales ranging from femtoseconds to seconds including chromophore isomerization and protonation as well as large structural rearrangements. To obtain local dynamic information the vibrational label thiocyanate (SCN) can be inserted site-specifically at any desired position in the protein by cysteine mutation and cyanylation. The label's CN stretch vibration is highly sensitive to polarity, hydrogen bonding interactions and electric fields and is spectrally well separated from the overlapping protein absorptions. During the course of this thesis it was impressively demonstrated that the successful incorporation of the SCN label at selected positions in PYP provides a powerful tool to study structure changes and dynamics during the photocycle and enhance the local information that are obtained by infrared (IR) spectroscopic methods. Hence the SCN-labeled protein mutants were studied under equilibrium (steady-state) and non-equilibrium conditions.
Examination of the SCN absorption by FTIR spectroscopy showed the influence of various local environments on the label for different locations in the dark state. The response of the label under illumination with blue light reveals information about structural changes in the signaling state. Additional information for both states were obtained by the vibrational lifetime of the CN vibration measured via ultrafast IR-pump-IR-probe experiments. This observable is particularly sensitive for solvent exposure of the label. Time-resolved IR spectroscopy proved to be an excellent method to follow the protein dynamics throughout most part of the photocycle on a hundreds of femtoseconds to milliseconds timescale. By close inspection of protein and chromophore dynamics in wildtype-PYP over nine decades in time, new insights into the changes leading to the proposed photocycle intermediates were obtained. The investigation of the SCN label allowed to follow the different transient structure changes with high local resolution. Depending on its position within the protein the response of the label provided additional information on the photocycle transitions.
The insights that are obtained by the different observables in the steady-state and by the reaction of the SCN label to formation of the different intermediate states during the photocycle contribute to an improved understanding of local, light-induced structure changes in the photoreceptor PYP. This comprehensive study demonstrated the potential provided by the application of SCN as IR label for investigation of protein dynamics.
Safety requirements and the need of low‐migration UV inks have received increasing attention in the packaging industry. Crucial for the development and design of low‐migration UV inkjet inks for migration‐sensitive applications is the polymerization degree. In this study, curing‐behavior of a black, high purity packaging ink (HPP‐ink) was monitored using ATR‐FTIR spectroscopy. UV irradiation of HPP‐ink led to changes in specific absorption bands of the FTIR spectra due to crosslinking reaction of double bonds. Changes in absorptions bands at 1,408 and 1,321 cm−1 permitted the determination of CC conversion of acrylic and vinyl double bond, independently of one another. In addition, a method was developed which allows the investigation of surface‐cure and deep‐cure behavior, separately.
Hofstadter-Hubbard physics
(2020)
The Hofstadter model, besides the Haldane and Kane-Mele models, is the most common tight-binding model which hosts topologically nontrivial states of matter. In its time-reversal-symmetric formulation the model can even describe topological insulators. Experimentally, the Hofstadter model was realized with ultracold quantum gases in optical lattices which is a wellcontrolled way to engineer quantum states of tight-binding Hamiltonians. Another established control parameter in ultracold quantum gases are twoparticle, on-site interactions, also known as Hubbard interactions. This work aims at introducing the reader to the concepts of topological states of matter, a collection of corresponding tight-binding models, and the methodology to treat interacting topological states with dynamical mean-field theory.We present recent results for inhomogeneous, interacting systems, spinimbalanced magnetic systems, propose experimental detection methods, and extensions to three-dimensional topological states.
In heavy-ion collisions, the quark-gluon plasma is produced far from equilibrium. This regime is currently inaccessible by direct quantum chromodynamics (QCD) computations. In a holographic context, we propose a general method to characterize transport properties based on well-defined two-point functions. We calculate shear transport and entropy far from equilibrium, defining a time-dependent ratio of shear viscosity to entropy density, . Large deviations from its near-equilibrium value , up to a factor of 2.5, are found for realistic situations at the Large Hadron Collider. We predict the far-from-equilibrium time-dependence of to substantially affect the evolution of the QCD plasma and to impact the extraction of QCD properties from flow coefficients in heavy-ion collision data.
Understanding the hadron spectrum is one of the primary goals of non-perturbative QCD. Many predictions have experimentally been confirmed, others still remain under experimental investigation. Of particular interest is how gluonic excitations give rise to states with constituent glue. One class of such states are hybrid mesons that are predicted by theoretical models and Lattice QCD calculations. Searching for and understanding the nature of these states is a primary physics goal of the GlueX experiment at the CEBAF accelerator at Jefferson Lab. A search for a JPC = 1−− hybrid meson candidate, the Y(2175), in φ(1020)π+π+ and φ(1020)f0(980) channels in photoproduction on a proton target has been conducted. A first measurement of non-resonant φ(1020)π+π+ and φ(1020)f0(980) total cross sections in photoproduction has been performed. An upper limit on the resonance production cross section for the Y (2175) → φ(1020)π+π+ and Y (2175) → φ(1020)f0(980) channels are estimated. Since the analysis essentially depends on the quality of the charged kaon identification, also an optimization of particle identification through an improvement of the energy loss estimation in the central drift chamber by a truncated mean method has been investigated.
We construct a new equation of state for the baryonic matter under an intense magnetic field within the framework of covariant density functional theory. The composition of matter includes hyperons as well as Δ-resonances. The extension of the nucleonic functional to the hypernuclear sector is constrained by the experimental data on Λ and Ξ-hypernuclei. We find that the equation of state stiffens with the inclusion of the magnetic field, which increases the maximum mass of neutron star compared to the non-magnetic case. In addition, the strangeness fraction in the matter is enhanced. Several observables, like the Dirac effective mass, particle abundances, etc. show typical oscillatory behavior as a function of the magnetic field and/or density which is traced back to the occupation pattern of Landau levels.
A Large Ion Collider Experiment (ALICE) is one of the four large experiments at the Large Hadron Collider (LHC) at the European Organization for Particle Physics (CERN). ALICE focuses on the physics of the strong interaction and in particular on the Quark-Gluon Plasma. This is a state of matter in which quarks are de-confined. It is believed that it existed in the earliest moments of the evolution of the universe. The ALICE detector studies the products of the collisions between heavy-nuclei, between protons, and between protons and heavy-nuclei. The sub-detector closest to the interaction point is the Inner Tracking System (ITS), which is used to measure the momentum and trajectory of the particles generated by the collisions and allows reconstructing primary and secondary interaction vertices. The ITS needs to have an accurate spatial resolution, together with a low material budget to limit the effect of multiple scattering on low-energetic particles to precisely reconstruct their trajectory. During the Long Shutdown 2 (2019-2020) of the LHC, the current ITS will be replaced by a completely redesigned sub-detector, which will improve readout rate and particle tracking performance especially at low-momentum.
The ALice PIxel DEtector (ALPIDE) chip was designed to meet the requirements of the upgraded ITS in terms of resolution, material budget, radiation hardness, and readout rate. The ALPIDE chip is a Monolithic Active Pixel Sensor (MAPS) realised in Complementary Metal-Oxide Semiconductor (CMOS) technology. Sensing element, analogue front-end, and its digital readout are integrated into the same silicon die. The readout architecture of the new ITS foresees that data is transmitted via a high-speed serial link directly from the ALPIDE to the off-detector electronics. The data is transmitted off-chip by a so-called Data Transmission Unit (DTU) which needs to be tolerant to Single-Event Effects induced by radiation, in order to guarantee reliable operation. The ALPIDE chip will operate in a radiation field with a High-Energy Hadron peak flux of 7.7·10^5 cm^-2s^-1.
The data are sent by the ALPIDE on copper cables to the readout system, which aggregates them and re-transmits them via optical fibres to the counting room. The position where the readout electronics will be placed is constrained by the maximum transmission distance reasonably achievable by the ALPIDE Data Transmission Unit and mechanical constraints of the ALICE experiment. The radiation field at that location is not negligible for its effects on electronics: the high-energy hadrons flux can reach 10^3 cm^-2s^-1. Static RAM (SRAM)-based Field Programmable Gate Arrays (FPGAs) are favoured over Application Specific Integrated Circuits (ASICs) or Radiation Hard by Design (RHBD) commercial devices because of cost effectiveness. Moreover, SRAM-based FPGAs are re-configurable and provide the data throughput required by the ITS. The main issue with SRAM-based FPGAs, for the intended application, is the susceptibility of their Configuration RAM (CRAM) to Single-Event Upsets: the number of CRAM bits is indeed much higher than the logic they configure. Total Ionizing Dose (TID) at the readout designed position is indeed still acceptable for Component Off The Shelf (COTS), provided that proper verification is carried out.
This dissertation focuses on two parts of the design of the readout system: the Data Transmission Unit of the ALPIDE chip and the design of fundamental modules for the SRAM-based FPGA of the readout electronics. In the first part, a module of the Data Transmission Unit is designed, optimising the trade-off between power consumption, radiation tolerance, and jitter performance. The design was tested and thoroughly characterised, including tests while under irradiation with a 30 MeV protons. Furthermore the Data Transmission Unit performance was validated after the integration into the first prototypes of ITS modules. In the second part, the problem of developing a radiation-tolerant SRAM-based FPGA design is investigated and a solution is provided. First, a general methodology for designing radiation-tolerant Finite State Machines in SRAM-based FPGAs is analysed, implemented, and verified. Later, the radiation-tolerant FPGA design for the ITS readout is described together with the radiation effects mitigation techniques that were selectively applied to the different modules. The design was tested with multiple irradiation tests and the results are stated below.
Proteine sind die Maschinen der Zellen. Um die Funktionalität von zahlreichen zellulären Prozessen zu gewährleisten, müssen Kommunikationssignale innerhalb von Proteinen weitergeleitet werden. Die Weiterleitung einer Störung an einem Ort im Protein zu einer entfernten Stelle, an welcher sie strukturelle und/oder dynamische Änderungen auslöst, wird Allosterie genannt. Zunächst wurde Allosterie hauptsächlich mit großräumigen Konformationsänderungen in Verbindung gebracht, aber später entwickelte sich ein dynamischerer Blickwinkel auf Allosterie in Abwesenheit dieser großräumigen Konformationsänderungen. Die Idee eines allosterischen Pfades bestehend aus konservierten und energetisch gekoppelten Aminosäuren, welche die Signalweiterleitung zwischen entfernten Stellen im Protein vermitteln, entstand. Diese allosterischen Pfade wurden durch zahlreiche theoretische Studien in Zusammenhang mit Pfaden effizienten anisotropen Energieflusses gebracht. Der Energiefluss entlang dieser Netzwerke verknüpft allosterische Signalübertragung mit Schwingungsenergietransfer (VET - vibrational energy transfer). Die Großzahl der Forschungsarbeiten über dynamische Allosterie basiert auf theoretischen Methoden, weil nur wenige geeignete experimentelle Verfahren existieren. Um diesen essentiellen biologischen Prozess der Informationsübertragung besser verstehen zu können, ist die Entwicklung neuer und leistungsstarker experimenteller Instrumente und Techniken daher dringend erforderlich. Die vorliegende Dissertation setzt sich dies zum Ziel.
VET in Proteinen ist aufgrund der Proteingeometrie inhärent anisotrop. Alle globulären Proteine besitzen Kanäle effizienten Energieflusses, von denen vermutet wird, dass sie wichtig für Proteinfunktionen, wie die schnelle Ableitung von überschüssiger Wärme, Ligandenbindung und allosterische Signalweiterleitung, sind. VET kann mit zeitaufgelöster Infrarot (IR) Spektroskopie untersucht werden, bei welcher ein Femtosekunden Anregepuls eines Lasers Schwingungsenergie in ein molekulares System an einer bestimmten Stelle injiziert und ein, nach einem veränderbarem Zeitintervall folgender, IR Abfragepuls die Ausbreitung dieser Schwingungsenergie detektiert. Ein protein-kompatibler und universell einsetzbarer Chromophor, der die Energie eines sichtbaren Photons in Schwingungsenergie konvertiert, wird als Heizelement benötigt um langreichweitige VET Pfade in Proteinen kartieren zu können. Der Azulen (Azu) Chromophor eignet sich dafür, weil er nach Photoanregung des ersten elektronischen Zustandes durch ultraschnelle interne Konversion fast die gesamte injizierte Energie innerhalb von einer Picosekunde in Schwingungsenergie umwandelt. Eingebettet in die nicht-kanonische Aminosäure (ncAA - non-canonical amino acid) ß-(1-Azulenyl)-L-Alanine (AzAla), kann der Azu Rest in Proteine eingebaut werden. Die Ankunft der injizierten Schwingungsenergie an einer bestimmten Stelle im Protein kann mithilfe eines IR Sensors detektiert werden. Die Kombination aus Azu als VET Heizelement und Azidohomoalanine (Aha) als VET Sensor mit transienter IR (TRIR) Spektroskopie wurde schon erfolgreich an kleinen Peptiden in der Dissertation von H. M. Müller-Werkmeister getestet, die der vorliegenden Dissertation in den Laboren der Bredenbeck Gruppe vorausging.
Die Schwingungsfrequenz chemischer Bindungen ist hochempfindlich auf selbst kleine Änderungen der Konformation und Dynamik in der unmittelbaren Umgebung und kann mit IR Spektroskopie gemessen werden, z. B. mit Fourier Transform IR (FTIR) Spektroskopie. IR Spektroskopie bietet eine außergewöhnlich gute Zeitauflösung, die es ermöglicht, dynamische Prozesse in Molekülen auf einer Zeitskala von wenigen Picosekunden zu beobachten, wie z. B. die ultraschnelle Weiterleitung von Schwingungsenergie. Mit zweidimensionaler (2D)-IR Spektroskopie können die Relaxation von schwingungsangeregten Zuständen und strukturelle Fluktuationen um die schwingende Bindung untersucht werden. Allerdings geht die herausragende Zeitauflösung mit limitierter spektraler Auflösung einher. In größeren Molekülen mit zahlreichen Bindungen überlagern sich die Schwingungsbanden und die Ortsauflösung geht verloren. Um diese Limitierung zu überwinden, können IR Marker benutzt werden, chemische Gruppen, die in einer spektral durchsichtigen Region des Protein/Wasser Spektrums (1800 bis 2500 cm-1) absorbieren. Als ncAA können sie kotranslational in Proteine an einer gewünschten Stelle eingebaut werden und so ortsspezifische Informationen aus dem Proteininneren liefern. Aufgrund ihrer geringen Größe, eines relativ großen Extinktionskoeffizientens (350-400 M-1cm-1) und einer hohen Empfindlichkeit auf Änderungen in der lokalen Umgebung sind organische Azide (N3) wie zum Beispiel Aha besonders geeignete IR Marker. Aha kann als Methionin Analogon ins Protein eingebaut werden.
...
Neutron total cross sections are an important source of experimental data in the evaluation of neutron-induced cross sections. The sum of all neutron-induced reaction cross sections can be determined with a precision of a few per cent in a relative measurement. The neutron spectrum of the photoneutron source nELBE extends in the fast region from about 100 keV to 10 MeV and has favourable conditions for transmission measurements due to the low instantaneous flux of neutrons and low gamma-flash background. Several materials of interest (in part included in the CIELO evaluation or on the HPRL of OECD/NEA) have been investigated: 197Au [1, 2], natFe [2], natW [2], 238U, natPt, 4He, natO, natNe, natXe. For gaseous targets high pressure gas cells with flat end-caps have been built that hold up to 200 bar pressure. The experimental setup will be presented including results from several transmission experiments and the data analysis leading to the total cross sections will be discussed.