530 Physik
Refine
Year of publication
- 2020 (259) (remove)
Document Type
- Article (152)
- Preprint (78)
- Doctoral Thesis (21)
- Bachelor Thesis (3)
- Contribution to a Periodical (3)
- Conference Proceeding (1)
- Master's Thesis (1)
Has Fulltext
- yes (259)
Is part of the Bibliography
- no (259)
Keywords
Institute
- Physik (252)
- Frankfurt Institute for Advanced Studies (FIAS) (121)
- Informatik (95)
- ELEMENTS (5)
- Präsidium (3)
- Helmholtz International Center for FAIR (2)
- Biochemie, Chemie und Pharmazie (1)
- Geowissenschaften / Geographie (1)
- Informatik und Mathematik (1)
- Medizin (1)
- Sportwissenschaften (1)
- Zentrum für Biomolekulare Magnetische Resonanz (BMRZ) (1)
In the current dismal situation of the COVID-19 pandemic, effective management of patients with pneumonia and acute respiratory distress syndrome is of vital importance. Due to the current lack of effective pharmacological concepts, this situation has caused interest in (re)considering historical reports on the treatment of patients with low-dose radiation therapy for pneumonia. Although these historical reports are of low-level evidence per se, hampering recommendations for decision-making in the clinical setting, they indicate effectiveness in the dose range between 0.3 and 1 Gy, similar to more recent dose concepts in the treatment of acute and chronic inflammatory/degenerative benign diseases with, e.g., a single dose per fraction of 0.5 Gy. This concise review aims to critically review the evidence for low-dose radiation treatment of COVID-19 pneumopathy and discuss whether it is worth investigating in the present clinical situation.
Ionenstrahlen werden in der Grundlagenforschung, in der Industrie und der Medizin verwendet. Um die Teilchen für die jeweiligen Anforderungen nutzbar zu machen, werden sie mit Ionenbeschleunigern je nach Anwendung auf eine bestimmte Energie beschleunigt. Eine Beschleunigeranlage besteht dabei aus einer Reihe von unterschiedlichen Elementen: Ionenquellen, Linearbeschleuniger, Kreisbeschleuniger, Fokussierelemente, Diagnosesysteme usw. In jeder dieser Kategorien gibt es wiederum verschiedene Realisierungsmöglichkeiten, je nach Anforderung des jeweiligen Abschnitts und der gesamten Anlage. Im Bereich der Linearbeschleuniger ist als Bindeglied zwischen Ionenquelle/Niederenergiebereich und Nachfolgebeschleuniger der Radiofrequenzquadrupol (RFQ) weit verbreitet. Dieser kann den aus der Quelle kommenden Gleichstromstrahl in Teilchenpakete (Bunche) formen und diese gleichzeitig auf die nächste Beschleunigerstufe angepasst vorbeschleunigen. Desweiteren wird der Teilchenstrahl innerhalb des RFQ kontinuierlich fokussiert, wodurch insbesondere bei diesen niedrigen Energien Strahlverluste minimiert werden. Bei hohem Masse-zu-Ladungs-Verhältnis wird für schwere Ionen eine niedrige Resonanzfrequenz von deutlich unter 100 MHz benötigt. Dies führt zu längeren Beschleunigungszellen entlang der Elektroden, womit durch eine bessere Fokussierung auch höhere Strahlströme beschleunigt werden können. Im Allgemeinen bedeutet eine niedrigere Resonanzfrequenz aber auch einen größeren Querschnitt der Resonanzstruktur sowie einen längeren Beschleuniger. Gegenstand dieser Arbeit ist die Untersuchung unterschiedlicher RFQ-Strukturen für niedrige Frequenzen, wie sie beispielsweise im Linearbeschleunigerbereich der Gesellschaft für Schwerionenforschung (GSI) in Darmstadt Anwendung finden. Zunächst wird die Beschleunigeranlage des GSI Helmholtzzentrums für Schwerionenforschung in Darmstadt und dessen zur Zeit im Bau befindliche Erweiterung FAIR (Facility for Antiproton and Ion Research) kurz vorgestellt. Teil dieser Anlage ist der Hochstrominjektor genannte Anfangsbeschleuniger, der wiederum aus einem RFQ und zwei nachfolgenden Driftröhrenbeschleunigern besteht. Dieser Hochstrominjektor dient als Referenz für die vorliegende Arbeit. In Kapitel 3 wird kurz auf Linearbeschleuniger im Allgemeinen und auf das Grundprinzip und die Eigenschaften eines RFQ näher eingegangen. Anschließend werden verschiedene RFQ-Strukturkonzepte vorgestellt und die Strahldynamik in einem RFQ sowie charakteristische Resonatorgrößen beschrieben. Ausgangspunkt ist der aktuelle RFQ des Hochstrominjektors (Kapitel 4). Dieser IH-RFQ mit einer Betriebsfrequenz von 36 MHz ist seit vielen Jahren in Betrieb und soll für eine verbesserte Effizienz und Betriebssicherheit ein Upgrade erfahren. Dazu wurden Simulationen sowohl der bestehenden Struktur als auch mit Modifikationen durchgeführt und diese miteinander verglichen. Zur Entwicklung eines kompakten Resonators werden in Kapitel 5 verschiedene Splitring-RFQ-Modelle als Alternative zur IH-Struktur mittels Simulationen untersucht. Diese wurden für eine niedrigere Frequenz von 27 MHz entworfen, was der Frequenz des ursprünglichen Wideröe-Beschleunigers (Vorgänger des Hochstrominjektors HSI) entspricht und ebenso wie die 36 MHz des IH-RFQ eine Subharmonische der 108 MHz des Folgebeschleunigers ist. Abschließend wurde noch eine neue RFQ-Struktur, der Splitframe-RFQ, entworfen und untersucht. Auch dieser wurde für eine Frequenz von 27 MHz ausgelegt. Die Ergebnisse dieser Entwicklung, die eine Mischung aus einem Splitring- und einem klassischen 4-Rod-RFQ darstellt, befinden sich in Kapitel 6. Alle Feldsimulationen wurden mit dem Programm Microwave Studio von CST durchgeführt. Zusammenfassend werden die verschiedenen Konzepte anhand der charakteristischen Resonatorgrößen verglichen und ein Ausblick auf weiterführende Arbeiten gegeben.
High-pressure single-crystal to 20 GPa and powder diffraction measurements to 50 GPa, show that the structure of Pb2SnO4 strongly distorts on compression with an elongation of one axis. A structural phase transition occurs between 10 GPa and 12 GPa, with a change of space group from Pbam to Pnam. The resistivity decreases by more than six orders of magnitude when pressure is increased from ambient conditions to 50 GPa. This insulator-to-semiconductor transition is accompanied by a reversible appearance change from transparent to opaque. Density functional theory-based calculations show that at ambient conditions the channels in the structure host the stereochemically-active Pb 6s2 lone electron pairs. On compression the lone electron pairs form bonds between Pb2+ ions. Also provided is an assignment of irreducible representations to the experimentally observed Raman bands.
In situ investigation of membrane proteins is a challenging task. Previously we demonstrated that nitroxide labels combined with pulsed ESR spectroscopy is a promising tool for this purpose. However, the nitroxide labels suffer from poor stability, high background labeling, and low sensitivity. Here we show that Finland (FTAM) and OX063 based labels enable labeling of the cobalamin transporter BtuB and BamA, the central component of the β-barrel assembly machinery (BAM) complex, in E coli. Compared to the methanethiosulfonate spin label (MTSL), trityl labels eliminated the background signals and enabled specific in situ labeling of the proteins with high efficiency. The OX063 labels show a long phase memory time (TM) of ≈5 μs. All the trityls enabled distance measurements between BtuB and an orthogonally labeled substrate with high selectivity and sensitivity down to a few μm concentration. Our data corroborate the BtuB and BamA conformations in the cellular environment of E. coli.
This paper explores the many interesting implications for oscillator design, with optimized phase-noise performance, deriving from a newly proposed model based on the concept of oscillator conjugacy. For the case of 2-D (planar) oscillators, the model prominently predicts that only circuits producing a perfectly symmetric steady-state can have zero amplitude-to-phase (AM-PM) noise conversion, a so-called zero-state. Simulations on standard industry oscillator circuits verify all model predictions and, however, also show that these circuit classes cannot attain zero-states except in special limit-cases which are not practically relevant. Guided by the newly acquired design rules, we describe the synthesis of a novel 2-D reduced-order LC oscillator circuit which achieves several zero-states while operating at realistic output power levels. The potential future application of this developed theoretical framework for implementation of numerical algorithms aimed at optimizing oscillator phase-noise performance is briefly discussed.
We report here the in-cell NMR-spectroscopic observation of the binding of the cognate ligand 2′-deoxyguanosine to the aptamer domain of the bacterial 2′-deoxyguanosine-sensing riboswitch in eukaryotic cells, namely Xenopus laevis oocytes and in human HeLa cells. The riboswitch is sufficiently stable in both cell types to allow for detection of binding of the ligand to the riboswitch. Most importantly, we show that the binding mode established by in vitro characterization of this prokaryotic riboswitch is maintained in eukaryotic cellular environment. Our data also bring important methodological insights: Thus far, in-cell NMR studies on RNA in mammalian cells have been limited to investigations of short (<15 nt) RNA fragments that were extensively modified by protecting groups to limit their degradation in the intracellular space. Here, we show that the in-cell NMR setup can be adjusted for characterization of much larger (≈70 nt) functional and chemically non-modified RNA.
We explore the tilted-pulse-front excitation technique to control the superradiant emission of terahertz (THz) pulses from large-area photonconductive semiconductor switches. Two cases are studied. First, a photoconductive antenna emitting into free space, where the propagation direction of the optically generated THz beam is controlled by the choice of the tilt angle of the pump pulse front. Second, a THz waveguide structure with an integrated photoconductive window for the generation of THz radiation, where the injection of the THz radiation into a waveguide mode is optimized by the pulse front tilt. By providing long interaction lengths, such a waveguide-based optical-pump/THz-probe set-up may provide a new platform for the study of diverse short-lived optically induced excitations.
Während den ersten Mikrosekunden nach dem Urknall glaubt man, dass unser Universum aus einer heißen, dichten und stark wechselwirkenden Materie bestanden haben soll, welche man das Quark-Gluonen-Plasma (QGP) nennt.
In diesem Medium sind die elementaren Bausteine der Materie, die Quarks und die Gluonen, nicht mehr in Hadronen gebunden, sondern können sich stattdessen wie quasi-freie Teilchen verhalten.
Für die ALICE Kollaboration an CERN's Large Hadron Collider (LHC) ist die Untersuchung dieses Mediums eines der Hauptziele. Um dieses Medium im Labor zu erzeugen, werden Protonen und Nukleonen auf nahezu Lichtgeschwindigkeit beschleunigt und anschließend zur Kollision gebracht. Dabei werden Schwerpunktsenergien von bis zu 13 TeV bei Proton-Proton (pp) Kollisionen und bis zu 5.02 TeV bei Blei-Blei (Pb--Pb) Kollisionen erreicht.
Bei solchen hochenergetischen Kollisionen werden die kritischen Werte der Energiedichte und Temperatur von jeweils ungefähr 1 GeV/c und undgefähr 155 MeV überschritten, welche mithilfe von "lattice QCD" bestimmt wurden. Sie bieten daher die perfekten Voraussetzungen für einen Phasenübergang von normaler Materie zu einem QGP.
Die Entwicklung eines solchen Mediums, beginnend bei der eigentlichen Kollision, gefolgt von der Ausbildung des Plasmas und der letztendlichen Hadronisierung, kann jedoch nicht direkt untersucht werden, da das Plasma eine extrem kurze Lebensdauer hat.
Die Studien die das QGP untersuchen möchten, müssen sich deshalb auf Teilchenmessungen und deren Veränderung aufgrund von Einflüssen durch das Medium beschränken.
Es ist noch nicht definitiv geklärt, ob sich ein QGP nur in Kollisionen schwerer Ionen bildet, oder ob dies auch in kleineren Kollisionssystemen wie Proton-Proton oder Proton-Blei der Fall ist.
Damit in dieser Thesis Einschränkungen bezüglich einer möglichen Erzeugung eines mini-GQP in kleinen Kollisionssystemen gemacht werden kann, wird der Fokus auf Messungen von neutralen Pionen und Eta Mesonen mit dem ALICE Detektor am CERN LHC gesetzt. Hierfür wird in einem Referenzsystem von Proton-Proton Kollisionen bei sqrt(s)=8 TeV und in einem Proton-Blei (p--Pb) System bei sqrt(sNN)=8.16 TeV, welches eine nukleare Modifikation erfährt, gemessen und die Ergebnisse verglichen.
Da in Proton-Proton Kollisionen die Bildung eines QGP, aufgrund zu geringer Energiedichte, nicht erwartet wird, dient eine Messung in diesem System als Messbasis, um Effekte der Kollision selbst von Effekten nach der Kollision zu separieren, welche die Teilchenproduktion beeinflussen.
Teilchen können zusätzlich zu dem QGP auch mit kalter Kernmaterie interagieren, was sich in asymmetrischen Proton-Blei Kollisionen testen lässt. In diesem Kollisionssystem wird größtenfalls ein vergleichsweise kleines QGP gebildet, wohingegen das Blei Ion selbst als kalte Kernmaterie agieren kann.
Zusätzlich zu den Mesonenmessungen wird in dieser Thesis auch die Erzeugung von direkten Photonen bei niedrigen Transversalimpulsen (pT) in multiplizitätsabhängigen p--Pb Kollisionen bei einer Schwerpunktsenergie von sNN=5.02 TeV gemessen, welche als direkte Probe, sowie als charakteristisches Signal des QGP gilt.
Die neutralen Pionen, welche in dieser Thesis gemessen werden, kann man als einen Überlagerungszustand der zwei leichtesten Quarksorten, dem "up" (u) und dem "down" (d) Quark, sowie deren entsprechenden Anti-Teilchen verstehen.
Das eta meson hingegen hat einen zusätzlichen Anteil des "strange" Quarks und eine resultierende höhere Masse.
Quarks sind Teil des Standardmodells der Teilchenphysik, welches die Elementarteilchen und die zwischen ihnen wirkenden Elementarkräfte, ausgeübt durch Bosonen, beschreibt.
Das Modell umfasst insgesamt sechs Quarks, welche sich durch ihre Masse und Ladung unterscheiden und als Grundbestandteil von gebundenen Zuständen, sogenannten Hadronen, fungieren.
Die "up" und "down" Quarks gelten hierbei als die leichtesten Quarks und kommen daher am häufigsten in der Natur vor. Das bekannteste Beipiel stellen hier die allgemein bekannten Protonen (uud) und Neutronen (udd) dar, welche die Grundkomponenten von Nukleonen sind.
Die restlichen Quarks tragen eine deutlich höhere Masse und haben daher eine große Tendenz, sich in leichtere Quarks umzuwandeln, wodurch ihre Lebensdauer sehr gering ist. Die "top" und "bottom" Quarks, welche die Schwersten sind, können daher nicht in gewöhnlicher Materie gefunden werden.
Sie können jedoch experimentell durch hoch energetische Teilchenkollisionen erzeugt werden und indirekt über ihre Zerfallsprodukte nachgewiesen werden.
Quarks tragen eine elektrische Ladung von entweder 1/3 oder 2/3, sowie eine Farbladung, wobei Letztere verantwortlich für ihre Bindung in Hadronen ist.
Hadronen bestehen entweder aus drei Quarks, dann werden sie Baryonen genannt, oder aus einem Quark-Antiquark Paar, welches Meson genannt wird.
Diese gebundenen Zustände erfüllen eine insgesamt neutrale Farbladung, sowie eine vollzählige elektrische Ladung.
Des Weiteren gibt es auch exotische Penta-Quark Zustände, welche aus vier Quarks und einem Antiquark bestehen und bereits experimentell nachgewiesen wurden.
Aufgrund der starken Wechselwirkung, welche durch Gluonen vermittelt wird, können Quarks nicht einzeln beobachtet werden.
...
This article demonstrates the use of guided elastic waves (GEW) for multiple-in and multiple-out (MIMO) data communication in the framework of a structural health monitoring (SHM) system. Therefore, miniaturized low-voltage communication nodes have been developed. They are arranged in a spatially distributed and permanently installed network. Wireless exchange of encoded information across a metallic plate and a stiffened carbon-fiber reinforced plastics (CFRP) structure is investigated. A combination of square-wave excitation sequences and frequency-division multiplexing (FDM) is explored for parallel communication with multiple nodes. Moreover, the impact of the excitation-sequence length on the reliability of information transmission is studied in view of future energy-aware application scenarios. The presented system achieves in both studied structures error-free transmission at a data rate of 0.17 kbps (per carrier frequency) with a power consumption of 224 mW.
The requirement of the versatile signal generator has always been evident in modern RF and communication systems. The most conventional technique, voltage control oscillator (VCO), has inferior phase noise and narrow bandwidth despite its operating frequency can be up to the sub-THz regime. Its phase noise influenced by a various parameter associated with the oscillator circuit e.g. transistor size \& noise, bias current, noise leaking from the bias supply etc. The bandwidth is limited because the input voltage \& the output frequency of the VCO is not strictly linear over the tuning range. The phase noise and SFDR of the VCO output are enhanced by using the phase-lock technique. The phase-locked loop (PLL) uses the feedback system locking the reference frequency set by the VCO. However, the settling time of the PLL is higher due to a feedback control loop. The higher settling time increases the frequency switching time between PLL outputs. IG-oscillators is suitable for multi-GHz range and wide bandwidth application. Signal generation can alos be achieved by the free-electron radiation, optical lasers, Gunn diodes as well and they can operate even at the THz domain. All these signal generators suffer from slow frequency switching, lack of digital controllability, and advance modulation capability even though their frequency of operation is THz regime. Alternatively, the AWG (arbitrary wave generator) can produce a wide range of frequencies with low phase noise, including digital controllability. One of the vital components of the AWG is the direct digital synthesiser (DDS). Generally, it is composed of a phase accumulator, digital to analogue converter, sine mapping circuits and low pass filter. It needs a reference clock that acts as samples of the DDS outputs. Its output frequency can be varied by applying an appropriate digital input code. But high-speed DDS has several limitations; such as low number of output frequency points, lack of phase control unit, high power consumptions etc. This work addresses such limitations.
Diese Thesis befasst sich mit dem Problem korrelierter Elektronensysteme in realen Materialien. Ausgangspunkt hierbei ist die quantenmechanische Beschreibung dieser Systeme im Rahmen der sogenannten Kohn-Scham Dichtefunktionaltheorie, welche die Elektronen der Kristallsysteme als effektiv nicht-wechselwirkende Teilchen beschreibt.
Während diese Modellierung im Falle vieler Materialklassen erfolgreich ist, unterscheiden sich die korrelierten Elektronensysteme dadurch, dass der kollektive Charakter der Elektronendynamik nicht zu vernachlässigen ist.
Um diese Korrelationseffekte genauer zu untersuchen, verwenden wir in dieser Arbeit das Hubbard-Modell, welches mit der projektiven Wannierfunktionsmethode aus der Kohn-Scham Dichtefunktionaltheorie konstruiert werden kann.
Das Hubbard-Modell umfasst hierbei nur die lokale Elektron-Elektron-Wechselwirkung auf einem Gitter. Auch wenn das Modell augenscheinlich sehr simpel ist, existieren exakte Lösungen nur in bestimmten Grenzfällen. Dies macht die Entwicklung approximativer Ansätze erforderlich, wobei die Weiterentwicklung der sogenannten Two-Particle Self-Consistent Methode (TPSC) eine zentrale Rolle dieser Arbeit einnimmt.
Bei TPSC handelt es sich um eine Vielteilchenmethode, die in der Sprache funktionaler Ableitungen und sogenannter conserving approximations hergeleitet werden kann.
Der zentrale Gedanke dabei ist, den effektiven Wechselwirkungsvertex als statisch und lokal zu approximieren. Dies wiederum erlaubt die Bewegungsgleichung des Systems
erheblich zu vereinfachen, sodass eine numerische approximative Lösung des Hubbard-Modells möglich wird. Vorsetzung hierbei ist nur, dass sich das System in der normalleitenden Phase befindet und die bei Phasenübergängen entstehenden Fluktuationen nicht zu groß sind.
Während diese Methode ursprünglich von Y. M. Vilk und A.-M. Tremblay für das Ein-Orbital Hubbard-Modell entwickelt wurde, stellen wir in dieser Arbeit eine Erweiterung auf Viel-Orbital-Systeme vor.
Im Falle mehrerer Orbitale treten in der TPSC-Herleitung einzelne Komplikationen auf, die mit weiteren Approximationen behandelt werden müssen. Diese werden anhand eines einfachen Zwei-Orbital Modell-Systems diskutiert und die TPSC-Ergebnisse werden darüber hinaus mit den Ergebnissen der etablierten dynamischen Molekularfeldnährung verglichen.
In diesem Zusammenhang werden auch mögliche zukünftige Erweiterungen bzw. Verbesserungen von TPSC diskutiert.
Ein weiterer wichtiger Aspekt ist die Anwendung von TPSC auf reale Materialien.
In diesem Zusammenhang werden in dieser Arbeit die supraleitenden Eigenschaften der organischen K-(ET)2X Systeme untersucht. Hierbei lassen die TPSC-Resultate darauf schließen, dass das populäre Dimer-Modell, welches zur Beschreibung dieser Materialien herangezogen wird, nicht genügt um die experimentell bestimmten kritischen Temperaturen zu erklären und dass das komplexere Molekülmodell weitere exotische supraleitende Lösungen zulässt.
Schließlich untersuchen wir außerdem die elektronischen Eigenschaften des eisenbasierten Supraleiters LiFeAs und diskutieren inwieweit nicht-lokale Korrelationseffekte, welche durch TPSC aufgelöst werden können, die experimentellen Daten reproduzieren.
This dissertation presents the development of a new radio frequency quadrupole (RFQ) structure of the 4-rod type with an operating frequency of 108 MHz for the acceleration of heavy ions with mass-to-charge ratios of up to 8.5 at high duty cycles up to CW operation ("continuous wave") at the High Charge Injector (HLI) of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt.
The need to develop a completely new RFQ for the HLI arises from the fact that with the previously designed and built 4-rod RFQ structure, which was commissioned at the HLI in 2010 as part of the planned HLI upgrade program, the desired operating modes in both pulsed and CW operation could not be achieved even after several years of operating experience and considerable efforts to eliminate or at least mitigate the severe operational instabilities. Mechanical vibrations of the electrodes, which result in strong modulated power reflection, as well as the high thermal sensitivity proved to be particularly problematic.
In addition to the RF design of the new RFQ by simulations performed with the CST Microwave Studio software, the focus of the investigations fell on the mechanical analysis of vibrations on the electrode rods caused by RF operation, for which the ANSYS Workbench software was used. Due to the high thermal load of the RFQ structure of more than 30 kW/m in CW operation, an accurate analysis of the thermal effects on electrode deformation as well as resulting frequency detuning of the resonator is also required, which was investigated by simulations within the capabilities of CST Mphysics Studio.
Based on the results of the design studies carried out by simulations and the thereby achieved design optimizations, a 4-rod RFQ prototype with 6 stems was finally manufactured, on which most of the properties expected from the simulations could be validated by measurements of the RF characteristics as well as of the vibration behavior.
Finally, based on the results of the pre-tests and considering a newly developed beam dynamics concept, a completely revised RF design for a new full-length HLI-RFQ was derived from the prototype design.
Die vorliegende Arbeit beschreibt die Erzeugung und Charakterisierung verschiedenartiger piezoresistiver Dünnschichten für die Druck- und Dehnungssensorik bei hohen Temperaturen, die mittels Sputterdeposition abgeschieden werden:
- metallische Schichten aus Chrom mit Verunreinigungen aus Sauerstoff, Stickstoff oder Platin,
- granulare Keramik-Metall-Schichten (Cermets), mit Platin oder Nickel als Metallkomponente und Aluminiumoxid (Al2O3) oder Bornitrid (BN) als Keramikkomponente.
Beide Schichttypen können mit geeigneten Beschichtungsparametern erhebliche piezoresistive Effekte aufweisen, also einen Widerstands-Dehnungs-Effekt, der den von typischen Metallschichten um ein Mehrfaches übersteigt. Der Effekt wird quantifiziert durch den k-Faktor, der die relative Änderung des Widerstands R auf die relative Änderung der Länge l, d.h. die Dehnung ε=Δl/l, bezieht: k=ΔR/(R ε).
In Beschichtungsreihen werden die Schichtzusammensetzung und die Depositionsbedingungen variiert und die Auswirkungen auf den elektrischen Widerstand, dessen Temperaturkoeffizienten (TKR), sowie den k-Faktor untersucht. Die k-Faktoren der chrombasierten Schichten liegen bei 10 bis 20 mit um null einstellbarem TKR. Die Cermet-Schichten erreichen je nach Material k-Faktoren von 7 bis über 70 mit meist stark negativen TKR von mehreren -0,1 %/K.
Die Chrom- und Chrom-Stickstoff-Schichten erweisen sich als geeignete Sensorschichten für Membran-Drucksensoren. Daher wird eine Reihe von Sensoren mit Wheatstone-Messbrücken erzeugt und charakterisiert. Sie zeigen den hohen k-Faktoren entsprechende hohe Signalspannen. Die guten Sensoreigenschaften bleiben auch bei hohen Temperaturen bis 230 °C erhalten.
Nach den ersten Untersuchungen bei Dehnungen bis maximal 0,1 % wird zusätzlich das Verhalten der Schichten bei höheren Dehnungen bis 1,4 % untersucht. Es zeigt sich vorwiegend ein lineares Widerstands-Dehnungs-Verhalten. Die Leiterbahnen der spröden chrombasierten Schichten werden bei Dehnungen um 0,7 % jedoch durch Risse zerstört, die sich von den Rändern der Schicht her ausbreiten.
Die Platin-Aluminiumoxid-Schicht zeigt einen enorm großen, nichtlinearen Widerstands-Dehnungs-Effekt, der auf Risse zurückgeführt werden kann, die sich nach einigen Belastungszyklen reproduzierbar öffnen und schließen.
Tieftemperaturmessungen von 2 bis 300 K zeigen Widerstandsminima der Chrom-Stickstoff-Schichten; Magnetwiderstandsmessungen deuten jedoch nicht auf den Kondo-Effekt hin.
Die Cermet-Schichten zeigen thermisch aktivierte Leitfähigkeit.
Ausgewählte Schichten werden bei Temperaturen bis 420 °C (693 K) charakterisiert. Die chrombasierten Schichten haben bei hohen Temperaturen stabile Widerstände, zeigen jedoch stark nichtlineare Temperaturverläufe von Widerstand und k-Faktor. Oberhalb einer gewissen Temperatur verschwindet der piezoresistive Effekt, kehrt jedoch beim Abkühlen zurück. Die Verläufe lassen sich durch die Schichtzusammensetzung und auch durch Temperaturbehandlungen modifizieren.
Die Platin-Aluminiumoxid-Schicht ist ebenfalls temperaturstabil und zeigt geringe Änderungen des k-Faktors im Temperaturverlauf. Platin-Bornitrid zeigt große, reversible Widerstandsänderungen bei höheren Temperaturen, die auf mögliche Gaseinlagerungen hindeuten.
Aus den experimentellen Ergebnissen lassen sich die Ursachen der Piezoresistivität ableiten: Die chrombasierten Schichten bilden, wie in der Literatur vielfach beschrieben, unterhalb einer Ordnungstemperatur einen Spindichtewellen-Antiferromagnetismus aus. Dieser Zustand führt zu einem zusätzlichen Widerstandsbeitrag, der die beschriebenen Nichtlinearitäten der Widerstands-Temperatur-Verläufe verursacht und zudem empfindlich auf mechanische Dehnung reagiert und so zu erhöhten k-Faktoren führt.
Die Piezoresistivität der Cermet-Schichten resultiert aus der granularen Struktur, in der Ladungsträger zwischen Metallpartikeln tunneln. Mit exponentiell vom Partikelabstand abhängigen Widerständen der Tunnelübergänge resultieren hohe k-Faktoren. Mithilfe von Modellbetrachtungen, in denen Gleichungen für Tunnelwiderstände auf granulare Systeme angewendet werden, werden die experimentellen Ergebnisse diskutiert. Die Ergebnisse deuten darauf hin, dass sich die Eigenschaften der Keramik vorrangig auf den Betrag der k-Faktoren auswirken und die Eigenschaften des Metalls vor allem den TKR beeinflussen.
Für die vorliegende Arbeit wurden zur Analyse des Auger-Zerfalls kleiner Moleküle nach Photoionisation die aus der Zerfallsreaktion resultierenden Impuls- und Energiespektren von Photo- und Auger-Elektronen in Koinzidenz mit denen der ionischen Fragmente aufgenommen. Dies ermöglichte eine getrennte Betrachtung der während des Ionisationsschrittes und des Zerfallsschrittes dieses Prozesses besetzten Molekülzustände. Um weitere Einsicht in die Dynamik des Zerfalls zu erhalten, wurden vorhandene theoretische Modelle, welche insbesondere die Interaktion der durch die Reaktion produzierten geladenen Teilchen (Post Collision Interaction) einbeziehen, an die gemessenen Energiespektren angepasst. Dies ermöglichte die separate Betrachtung der im Ionisationsschritt besetzten Molekülzustände. So konnten die Emissionswinkelverteilungen der Photoelektronen im molekülfesten Koordinatensystem für jeden besetzten Anfangszustand einzeln betrachtet werden. Die Trennung der Endzustände des Zerfalls erfolgte über die Analyse des Spektrums der Ionen-Aufbruchsenergie (Kinetic Energy Release) und den Vergleich mit berechneten Potentialkurven der beitragenden Endzustände.
Durch die nach den Anfangszuständen separierte Betrachtung des Auger-Zerfalls wurde es auch möglich, die Auswirkungen dieser Zustände auf die Zerfallsdynamik zu analysieren. Dafür lieferte die Anpassung der Modellprofile die Lebensdauer des jeweiligen 1s-Lochzustandes in dem entsprechenden Zerfallskanal. Diese jeweiligen Lebensdauern eines jeden Zustandes wurden abhängig von verschiedenen Parametern mit einer Genauigkeit im Attosekunden-Bereich aus den Energiespektren der Photoelektronen ermittelt.
In the last two decades, new unpredicted charmonium-like states with extraordinary characteristics have been observed experimentally. These states also known as the XYZ states, e.g., the Y(4260) or the X(3872), are mostly interpreted as QCD allowed exotic hadrons. One of the leading hadron physics experiments in the world, the Beijing Electron Spectrometer III (BESIII) at the Beijing Electron-Positron Collider II (BEPCII) is aiming towards revealing the internal structure of these states. It has brought numerous breakthrough discoveries including the discovery of the charged Zc(3900). In order to understand the nature of the Y(4260) state and its decay patterns, an inclusive analysis is performed for different recoil systems (π+π−,K+K− and K±π∓) using the BESIII data samples for center of mass energies above 4 GeV collected between 2013 and 2019. The aim of this analysis is twofold: on one hand, we search for new unobserved charmonium-like decay channels using the missing mass technique and on the other hand, it provides an accurate inclusive cross section measurement for e+e−→X π+π−, with the X being the J/ψ, hc and ψ(2S), respectively. Two resonant structures, the Y(4220) and the Y(4390), are observed in the inclusive energy dependent Born cross section of e+e−→hc π+π−, which is consistent with the BESIII exclusive measurements. Moreover, the energy dependent cross section of e+e−→J/ψ π+π− is investigated, in which two resonances have consistently been observed with the previous BESIII exclusive studies, namely, the Y(4220) and the Y(4320). In the (K±π±) recoil system, possible Y(4260) open charm decay channels are investigated. Two enhancements are observed in the inclusive energy dependent cross section of e+e−→DD above 4.13GeV, which could possibly be the ψ(4160)and the ψ(4415).
Cornelius Krellner, Physiker
(2020)
In this paper we present first-order reversal curve (FORC) diagrams of ensembles of three-dimensional Co3Fe nanostructures as 2 × 2 arrays of nano-cubes and nano-trees. The structures are fabricated and investigated by an advanced platform of focused electron beam induced deposition combined with high-resolution detection of magnetic stray fields using a home-built micro-Hall magnetometer based on an AlGaAs/GaAs heterostructure. The experimental FORC diagrams are compared to macrospin simulations for both geometries at different angles of the externally applied magnetic field. The measured FORC diagrams are in good agreement with the simulated ones and reflect non-uniform magnetization reversal dominated by multi-vortex states within, and strong magnetic coupling between, the building blocks of our nanostructures. Thus, a FORC analysis of small arrays of 3D magnetic nanostructures provides more detailed insights into the mechanisms of magnetization reversal beyond standard major hysteresis loop measurements.
A model for the description of proton collisions from molecules composed of atoms such as hydrogen, carbon, nitrogen, oxygen and phosphorus (H, C, N, O, P) was recently extended to treat collisions with multiply charged ions with a focus on net ionization. Here we complement the work by focusing on net capture. The ion–atom collisions are computed using the two-center basis generator method. The atomic net capture cross sections are then used to assemble two models for ion–molecule collisions: An independent atom model (IAM) based on the Bragg additivity rule (labeled IAM-AR), and also the so-called pixel-counting method (IAM-PCM) which introduces dependence on the orientation of the molecule during impact. The IAM-PCM leads to significantly reduced capture cross sections relative to IAM-AR at low energies, since it takes into account the overlap of effective atomic cross sectional areas. We compare our results with available experimental and other theoretical data focusing on water vapor (H2O), methane (CH4) and uracil (C4H4N2O2). For the water molecule target we also provide results from a classical-trajectory Monte Carlo approach that includes dynamical screening effects on projectile and target. For small molecules dominated by a many-electron atom, such as carbon in methane or oxygen in water, we find a saturation phenomenon for higher projectile charges (q=3) and low energies, where the net capture cross section for the molecule is dominated by the net cross section for the many-electron atom, and the net capture cross section is not proportional to the total number of valence electrons.
The small photoreceptor Photoactive Yellow Protein (PYP) enters a reversible photocycle after excitation with blue light. The intermediate states are formed on timescales ranging from femtoseconds to seconds including chromophore isomerization and protonation as well as large structural rearrangements. To obtain local dynamic information the vibrational label thiocyanate (SCN) can be inserted site-specifically at any desired position in the protein by cysteine mutation and cyanylation. The label's CN stretch vibration is highly sensitive to polarity, hydrogen bonding interactions and electric fields and is spectrally well separated from the overlapping protein absorptions. During the course of this thesis it was impressively demonstrated that the successful incorporation of the SCN label at selected positions in PYP provides a powerful tool to study structure changes and dynamics during the photocycle and enhance the local information that are obtained by infrared (IR) spectroscopic methods. Hence the SCN-labeled protein mutants were studied under equilibrium (steady-state) and non-equilibrium conditions.
Examination of the SCN absorption by FTIR spectroscopy showed the influence of various local environments on the label for different locations in the dark state. The response of the label under illumination with blue light reveals information about structural changes in the signaling state. Additional information for both states were obtained by the vibrational lifetime of the CN vibration measured via ultrafast IR-pump-IR-probe experiments. This observable is particularly sensitive for solvent exposure of the label. Time-resolved IR spectroscopy proved to be an excellent method to follow the protein dynamics throughout most part of the photocycle on a hundreds of femtoseconds to milliseconds timescale. By close inspection of protein and chromophore dynamics in wildtype-PYP over nine decades in time, new insights into the changes leading to the proposed photocycle intermediates were obtained. The investigation of the SCN label allowed to follow the different transient structure changes with high local resolution. Depending on its position within the protein the response of the label provided additional information on the photocycle transitions.
The insights that are obtained by the different observables in the steady-state and by the reaction of the SCN label to formation of the different intermediate states during the photocycle contribute to an improved understanding of local, light-induced structure changes in the photoreceptor PYP. This comprehensive study demonstrated the potential provided by the application of SCN as IR label for investigation of protein dynamics.
Safety requirements and the need of low‐migration UV inks have received increasing attention in the packaging industry. Crucial for the development and design of low‐migration UV inkjet inks for migration‐sensitive applications is the polymerization degree. In this study, curing‐behavior of a black, high purity packaging ink (HPP‐ink) was monitored using ATR‐FTIR spectroscopy. UV irradiation of HPP‐ink led to changes in specific absorption bands of the FTIR spectra due to crosslinking reaction of double bonds. Changes in absorptions bands at 1,408 and 1,321 cm−1 permitted the determination of CC conversion of acrylic and vinyl double bond, independently of one another. In addition, a method was developed which allows the investigation of surface‐cure and deep‐cure behavior, separately.
Hofstadter-Hubbard physics
(2020)
The Hofstadter model, besides the Haldane and Kane-Mele models, is the most common tight-binding model which hosts topologically nontrivial states of matter. In its time-reversal-symmetric formulation the model can even describe topological insulators. Experimentally, the Hofstadter model was realized with ultracold quantum gases in optical lattices which is a wellcontrolled way to engineer quantum states of tight-binding Hamiltonians. Another established control parameter in ultracold quantum gases are twoparticle, on-site interactions, also known as Hubbard interactions. This work aims at introducing the reader to the concepts of topological states of matter, a collection of corresponding tight-binding models, and the methodology to treat interacting topological states with dynamical mean-field theory.We present recent results for inhomogeneous, interacting systems, spinimbalanced magnetic systems, propose experimental detection methods, and extensions to three-dimensional topological states.
In heavy-ion collisions, the quark-gluon plasma is produced far from equilibrium. This regime is currently inaccessible by direct quantum chromodynamics (QCD) computations. In a holographic context, we propose a general method to characterize transport properties based on well-defined two-point functions. We calculate shear transport and entropy far from equilibrium, defining a time-dependent ratio of shear viscosity to entropy density, . Large deviations from its near-equilibrium value , up to a factor of 2.5, are found for realistic situations at the Large Hadron Collider. We predict the far-from-equilibrium time-dependence of to substantially affect the evolution of the QCD plasma and to impact the extraction of QCD properties from flow coefficients in heavy-ion collision data.
Understanding the hadron spectrum is one of the primary goals of non-perturbative QCD. Many predictions have experimentally been confirmed, others still remain under experimental investigation. Of particular interest is how gluonic excitations give rise to states with constituent glue. One class of such states are hybrid mesons that are predicted by theoretical models and Lattice QCD calculations. Searching for and understanding the nature of these states is a primary physics goal of the GlueX experiment at the CEBAF accelerator at Jefferson Lab. A search for a JPC = 1−− hybrid meson candidate, the Y(2175), in φ(1020)π+π+ and φ(1020)f0(980) channels in photoproduction on a proton target has been conducted. A first measurement of non-resonant φ(1020)π+π+ and φ(1020)f0(980) total cross sections in photoproduction has been performed. An upper limit on the resonance production cross section for the Y (2175) → φ(1020)π+π+ and Y (2175) → φ(1020)f0(980) channels are estimated. Since the analysis essentially depends on the quality of the charged kaon identification, also an optimization of particle identification through an improvement of the energy loss estimation in the central drift chamber by a truncated mean method has been investigated.
We construct a new equation of state for the baryonic matter under an intense magnetic field within the framework of covariant density functional theory. The composition of matter includes hyperons as well as Δ-resonances. The extension of the nucleonic functional to the hypernuclear sector is constrained by the experimental data on Λ and Ξ-hypernuclei. We find that the equation of state stiffens with the inclusion of the magnetic field, which increases the maximum mass of neutron star compared to the non-magnetic case. In addition, the strangeness fraction in the matter is enhanced. Several observables, like the Dirac effective mass, particle abundances, etc. show typical oscillatory behavior as a function of the magnetic field and/or density which is traced back to the occupation pattern of Landau levels.
A Large Ion Collider Experiment (ALICE) is one of the four large experiments at the Large Hadron Collider (LHC) at the European Organization for Particle Physics (CERN). ALICE focuses on the physics of the strong interaction and in particular on the Quark-Gluon Plasma. This is a state of matter in which quarks are de-confined. It is believed that it existed in the earliest moments of the evolution of the universe. The ALICE detector studies the products of the collisions between heavy-nuclei, between protons, and between protons and heavy-nuclei. The sub-detector closest to the interaction point is the Inner Tracking System (ITS), which is used to measure the momentum and trajectory of the particles generated by the collisions and allows reconstructing primary and secondary interaction vertices. The ITS needs to have an accurate spatial resolution, together with a low material budget to limit the effect of multiple scattering on low-energetic particles to precisely reconstruct their trajectory. During the Long Shutdown 2 (2019-2020) of the LHC, the current ITS will be replaced by a completely redesigned sub-detector, which will improve readout rate and particle tracking performance especially at low-momentum.
The ALice PIxel DEtector (ALPIDE) chip was designed to meet the requirements of the upgraded ITS in terms of resolution, material budget, radiation hardness, and readout rate. The ALPIDE chip is a Monolithic Active Pixel Sensor (MAPS) realised in Complementary Metal-Oxide Semiconductor (CMOS) technology. Sensing element, analogue front-end, and its digital readout are integrated into the same silicon die. The readout architecture of the new ITS foresees that data is transmitted via a high-speed serial link directly from the ALPIDE to the off-detector electronics. The data is transmitted off-chip by a so-called Data Transmission Unit (DTU) which needs to be tolerant to Single-Event Effects induced by radiation, in order to guarantee reliable operation. The ALPIDE chip will operate in a radiation field with a High-Energy Hadron peak flux of 7.7·10^5 cm^-2s^-1.
The data are sent by the ALPIDE on copper cables to the readout system, which aggregates them and re-transmits them via optical fibres to the counting room. The position where the readout electronics will be placed is constrained by the maximum transmission distance reasonably achievable by the ALPIDE Data Transmission Unit and mechanical constraints of the ALICE experiment. The radiation field at that location is not negligible for its effects on electronics: the high-energy hadrons flux can reach 10^3 cm^-2s^-1. Static RAM (SRAM)-based Field Programmable Gate Arrays (FPGAs) are favoured over Application Specific Integrated Circuits (ASICs) or Radiation Hard by Design (RHBD) commercial devices because of cost effectiveness. Moreover, SRAM-based FPGAs are re-configurable and provide the data throughput required by the ITS. The main issue with SRAM-based FPGAs, for the intended application, is the susceptibility of their Configuration RAM (CRAM) to Single-Event Upsets: the number of CRAM bits is indeed much higher than the logic they configure. Total Ionizing Dose (TID) at the readout designed position is indeed still acceptable for Component Off The Shelf (COTS), provided that proper verification is carried out.
This dissertation focuses on two parts of the design of the readout system: the Data Transmission Unit of the ALPIDE chip and the design of fundamental modules for the SRAM-based FPGA of the readout electronics. In the first part, a module of the Data Transmission Unit is designed, optimising the trade-off between power consumption, radiation tolerance, and jitter performance. The design was tested and thoroughly characterised, including tests while under irradiation with a 30 MeV protons. Furthermore the Data Transmission Unit performance was validated after the integration into the first prototypes of ITS modules. In the second part, the problem of developing a radiation-tolerant SRAM-based FPGA design is investigated and a solution is provided. First, a general methodology for designing radiation-tolerant Finite State Machines in SRAM-based FPGAs is analysed, implemented, and verified. Later, the radiation-tolerant FPGA design for the ITS readout is described together with the radiation effects mitigation techniques that were selectively applied to the different modules. The design was tested with multiple irradiation tests and the results are stated below.
Proteine sind die Maschinen der Zellen. Um die Funktionalität von zahlreichen zellulären Prozessen zu gewährleisten, müssen Kommunikationssignale innerhalb von Proteinen weitergeleitet werden. Die Weiterleitung einer Störung an einem Ort im Protein zu einer entfernten Stelle, an welcher sie strukturelle und/oder dynamische Änderungen auslöst, wird Allosterie genannt. Zunächst wurde Allosterie hauptsächlich mit großräumigen Konformationsänderungen in Verbindung gebracht, aber später entwickelte sich ein dynamischerer Blickwinkel auf Allosterie in Abwesenheit dieser großräumigen Konformationsänderungen. Die Idee eines allosterischen Pfades bestehend aus konservierten und energetisch gekoppelten Aminosäuren, welche die Signalweiterleitung zwischen entfernten Stellen im Protein vermitteln, entstand. Diese allosterischen Pfade wurden durch zahlreiche theoretische Studien in Zusammenhang mit Pfaden effizienten anisotropen Energieflusses gebracht. Der Energiefluss entlang dieser Netzwerke verknüpft allosterische Signalübertragung mit Schwingungsenergietransfer (VET - vibrational energy transfer). Die Großzahl der Forschungsarbeiten über dynamische Allosterie basiert auf theoretischen Methoden, weil nur wenige geeignete experimentelle Verfahren existieren. Um diesen essentiellen biologischen Prozess der Informationsübertragung besser verstehen zu können, ist die Entwicklung neuer und leistungsstarker experimenteller Instrumente und Techniken daher dringend erforderlich. Die vorliegende Dissertation setzt sich dies zum Ziel.
VET in Proteinen ist aufgrund der Proteingeometrie inhärent anisotrop. Alle globulären Proteine besitzen Kanäle effizienten Energieflusses, von denen vermutet wird, dass sie wichtig für Proteinfunktionen, wie die schnelle Ableitung von überschüssiger Wärme, Ligandenbindung und allosterische Signalweiterleitung, sind. VET kann mit zeitaufgelöster Infrarot (IR) Spektroskopie untersucht werden, bei welcher ein Femtosekunden Anregepuls eines Lasers Schwingungsenergie in ein molekulares System an einer bestimmten Stelle injiziert und ein, nach einem veränderbarem Zeitintervall folgender, IR Abfragepuls die Ausbreitung dieser Schwingungsenergie detektiert. Ein protein-kompatibler und universell einsetzbarer Chromophor, der die Energie eines sichtbaren Photons in Schwingungsenergie konvertiert, wird als Heizelement benötigt um langreichweitige VET Pfade in Proteinen kartieren zu können. Der Azulen (Azu) Chromophor eignet sich dafür, weil er nach Photoanregung des ersten elektronischen Zustandes durch ultraschnelle interne Konversion fast die gesamte injizierte Energie innerhalb von einer Picosekunde in Schwingungsenergie umwandelt. Eingebettet in die nicht-kanonische Aminosäure (ncAA - non-canonical amino acid) ß-(1-Azulenyl)-L-Alanine (AzAla), kann der Azu Rest in Proteine eingebaut werden. Die Ankunft der injizierten Schwingungsenergie an einer bestimmten Stelle im Protein kann mithilfe eines IR Sensors detektiert werden. Die Kombination aus Azu als VET Heizelement und Azidohomoalanine (Aha) als VET Sensor mit transienter IR (TRIR) Spektroskopie wurde schon erfolgreich an kleinen Peptiden in der Dissertation von H. M. Müller-Werkmeister getestet, die der vorliegenden Dissertation in den Laboren der Bredenbeck Gruppe vorausging.
Die Schwingungsfrequenz chemischer Bindungen ist hochempfindlich auf selbst kleine Änderungen der Konformation und Dynamik in der unmittelbaren Umgebung und kann mit IR Spektroskopie gemessen werden, z. B. mit Fourier Transform IR (FTIR) Spektroskopie. IR Spektroskopie bietet eine außergewöhnlich gute Zeitauflösung, die es ermöglicht, dynamische Prozesse in Molekülen auf einer Zeitskala von wenigen Picosekunden zu beobachten, wie z. B. die ultraschnelle Weiterleitung von Schwingungsenergie. Mit zweidimensionaler (2D)-IR Spektroskopie können die Relaxation von schwingungsangeregten Zuständen und strukturelle Fluktuationen um die schwingende Bindung untersucht werden. Allerdings geht die herausragende Zeitauflösung mit limitierter spektraler Auflösung einher. In größeren Molekülen mit zahlreichen Bindungen überlagern sich die Schwingungsbanden und die Ortsauflösung geht verloren. Um diese Limitierung zu überwinden, können IR Marker benutzt werden, chemische Gruppen, die in einer spektral durchsichtigen Region des Protein/Wasser Spektrums (1800 bis 2500 cm-1) absorbieren. Als ncAA können sie kotranslational in Proteine an einer gewünschten Stelle eingebaut werden und so ortsspezifische Informationen aus dem Proteininneren liefern. Aufgrund ihrer geringen Größe, eines relativ großen Extinktionskoeffizientens (350-400 M-1cm-1) und einer hohen Empfindlichkeit auf Änderungen in der lokalen Umgebung sind organische Azide (N3) wie zum Beispiel Aha besonders geeignete IR Marker. Aha kann als Methionin Analogon ins Protein eingebaut werden.
...
Neutron total cross sections are an important source of experimental data in the evaluation of neutron-induced cross sections. The sum of all neutron-induced reaction cross sections can be determined with a precision of a few per cent in a relative measurement. The neutron spectrum of the photoneutron source nELBE extends in the fast region from about 100 keV to 10 MeV and has favourable conditions for transmission measurements due to the low instantaneous flux of neutrons and low gamma-flash background. Several materials of interest (in part included in the CIELO evaluation or on the HPRL of OECD/NEA) have been investigated: 197Au [1, 2], natFe [2], natW [2], 238U, natPt, 4He, natO, natNe, natXe. For gaseous targets high pressure gas cells with flat end-caps have been built that hold up to 200 bar pressure. The experimental setup will be presented including results from several transmission experiments and the data analysis leading to the total cross sections will be discussed.
Activations with neutrons in the keV energy range were routinely performed at the Karlsruhe Institute of Technology (KIT) in Germany in order to simulate stellar conditions for neutron-capture cross sections. A quasi-Maxwell-Boltzmann neutron spectrum of kT = 25 keV, being of interest for the astrophysical s-process, was produced by the 7Li(p,n) reaction utilizing a 1912 keV proton beam at the Karlsruhe Van de Graaff accelerator. Activated samples resulting in long-lived nuclear reaction products with half-lives in the order of yr 100 Myr were analyzed by Accelerator Mass Spectrometry (AMS). Comparison of the obtained reaction cross sections to literature data from previous Time-of-Flight (ToF) measurements showed that the selected AMS data are systematically lower than the ToF data. To investigate this discrepancy, 54Fe(n,γ)55Fe and 35Cl(n,γ)36Cl reaction cross sections were newly measured at the Frankfurt Neutron Source (FRANZ) in Germany. To complement the existing data, an additional neutron activation of 54Fe and 35Cl at a proton energy of 2 MeV was performed. The results will give implications for the stellar environment at kT = 90 keV, reaching the not yet experimentally explored high-energy s-process range. AMS measurements of the activated samples are scheduled.
We derive the relation between cumulants of a conserved charge measured in a subvolume of a thermal system and the corresponding grand-canonical susceptibilities, taking into account exact global conservation of that charge. The derivation is presented for an arbitrary equation of state, with the assumption that the subvolume is sufficiently large to be close to the thermodynamic limit. Our framework – the subensemble acceptance method (SAM) – quantifies the effect of global conservation laws and is an important step toward a direct comparison between cumulants of conserved charges measured in central heavy ion collisions and theoretical calculations of grand-canonical susceptibilities, such as lattice QCD. As an example, we apply our formalism to net-baryon fluctuations at vanishing baryon chemical potentials as encountered in collisions at the LHC and RHIC.
This Dissertation deals with the development of FAIR-relevant X-ray diagnostics based on the interaction of lasers and particle beams with matter. The associated experimental methods are supposed to be employed in the HIHEX-experiments in the HHT-cave of the GSI Helmholtz Center for Heavy-Ion Research GmbH (GSI) in Phase-0 and in the APPA-cave at the Facility for Antiproton and Ion Research in Darmstadt, Germany.
Diagnostic of high aerial density targets that will be used in FAIR experiments demands intense and highly penetrating X-ray sources. Laser generated well-directe relativistic electron beams that interact with high Z materials is an excellent tool for generation of short-pulse high luminous sources of MeV-gammas.
In pilot experiments carried out at the PHELIX laser system, GSI Darmstadt, relativistic electrons were produced in a long scale plasma of near critical electron density (NCD) by the mechanism of the direct laser acceleration (DLA). Low density polymer foam layers preionised by a well-defined nanosecond laser pulse were used as NCD targets. The analysis of the measured electron spectra showed up to 10- fold increase of the electron "temperature" from T_Hot = 1–2 MeV, measured for the case of the interaction of 1–2 ×10^19 Wcm^(−2) ps-laser pulse with a planar foil, up to 14 MeV for the case when the relativistic laser pulse propagates through the by a ns-pulse preionised foam layer. In this case, up to 80–90 MeV electron energy was registered. An increase of the electron energy was accompanied by a strong increase of the number of relativistic electrons and well-defined directionality of the relativistic electron beam measured to be (12 ±1)° (FWHM). This directionality increases the gamma flux on target by far compared to the soft X-ray sources.
Additionally to laser based active diagnostics, passive techniques involving inherent X-ray fluorescence radiation of projectile and target emitted during heavy-ion target interaction can be used to measure the ion beam distribution on shot. This information is of great importance, since the target size is chosen to be smaller than the beam focus in order to ensure homogeneous heating of the HIHEX-target by the ion beam. High amounts of parasitic radiation and activation of experimental equipment is expected for experiments at the APPA-cave. For this reason, all electronic devices must be placed at a safe distance to the target chamber. In order to transport the signal over a large distance, the X-ray image of the target irradiated by heavy-ions has to be converted into an optical one.
For these purposes, the X-ray Conversion to Optical radiation and Transport (XCOT)-system was developed in the frame of a BMBF-project and commissioned in two beamtimes at the UNILAC, GSI during this work.
In experiments, we observed intense radiation of target atoms (K-shell transitions in Cu at 8–8.3 keV and L-shell transition in Ta) ionised in collisions with heavy ions as well as Doppler-shifted L-shell transitions of Au-projectiles passing through targets. This radiation can be used for monochromatic (dispersive elements like bent crystals) or polychromatic (pinhole) 2D X-ray mapping of the ion beam intensity distribution in the interaction region during the beam-target interaction. We measured the efficiency of the X-ray photon production depending on the target thickness and the number of ions passing through the target. The spatial resolution of the XCOT-system based on the multi-pinhole camera was measured to be (91±17) μm for the image magnification factor M = 2. It was considerably improved by application of a toroidally bent quartz crystal and reached 30 μm at M = 6. This resolution is optimal to image the distribution of a 1mm in diameter ion beam. As next step, the XCOT-system will be tested during the SIS18 beam-time at the HHT-experimental area.
Der 3D‐Druck von geometrisch komplexen Nanostrukturen ist auf dem Weg zu ersten Anwendungen. Die Auswahl an geeigneten Materialien ermöglicht metallische, halbleitende, isolierende, supraleitende und exotische magnetische Eigenschaften. Das 3D‐FEBID‐Verfahren schreibt mit dem Elektronenstrahl eines Raster‐Elektronenmikroskops wie mit einem Nanostift. Das Material wird als Gasstrom von Precursor‐Molekülen über eine Hohlnadel zugeführt. Der Elektronenstrahl ermöglicht die hochlokale Fragmentierung dieser Moleküle, die meist metallische Zielatome enthalten. Die lokale Verweildauer des Strahls steuert den Strukturaufbau in der Vertikalen, während seine seitliche Bewegung zu geneigten, freistehenden Strukturen führt. Eine Herausforderung ist die definierte Strahlsteuerung, um ein CAD‐Modell möglichst präzise in ein reales 3D‐Nanoobjekt zu überführen. Für die Zukunft soll eine simulationsgestützte Software zur Steuerung des Elektronenstrahls auch Laien die Anwendung erleichtern. 3D‐FEBID ist bereits heute ein zuverlässiges und in vielerlei Hinsicht einzigartiges Verfahren zur Direktabscheidung funktionaler Nanostrukturen.
Im Rahmen dieser Arbeit wurde ein Reaktionsmikroskop (REMI) nach dem Messprinzip COLTRIMS (Cold Target Recoil Ion Momentum Spectrometry) neu konstruiert und aufgebaut. Die Leistungsfähigkeit des Experimentaufbaus konnte sowohl in diversen Testreihen als auch anschließend unter realen Messbedingungen an der Synchrotronstrahlungsanlage SOLEIL und am endgültigen Bestimmungsort SQS-Instrument (Small Quantum Systems) des Freie-Elektronen-Lasers European XFEL (X-ray free-electron laser) eindrucksvoll unter Beweis gestellt werden.
Mit der Experimentiertechnik COLTRIMS ist es möglich, alle geladenen Fragmente einer Wechselwirkung eines Projektilteilchens mit einem Targetteilchen mittels zweier orts- und zeitauflösender Detektoren nachzuweisen. In einem Vakuumrezipienten wird die als Molekularstrahl präparierte Targetsubstanz inmitten der Hauptkammer zentral mit einem Projektilstrahl (z.B. des XFEL) zum Überlapp gebracht, sodass dort eine Wechselwirkung stattfinden kann. Bei den entstehenden Fragmenten handelt es sich um positiv geladene Ionen sowie negative geladene Elektronen. Elektrische Felder, erzeugt durch eine Spektrometer-Einheit, sowie durch Helmholtz-Spulen erzeugte magnetische Felder ermöglichen es, die geladenen Fragmente in Richtung der Detektoren zu lenken. Die Orts- und Zeitmessung eines einzelnen Teilchens (z.B. eines Ions) findet in Koinzidenz mit den anderen Teilchen (z.B. weiteren Ionen bzw. Elektronen) statt. Mit dieser Messmethode können die Impulsvektoren und Ladungszustände aller geladenen Fragmente in Koinzidenz gemessen werden. Da hierbei die geometrische Anordnung der einzelnen Komponenten für die Leistungsfähigkeit des Experiments eine entscheidende Rolle spielt, mussten bei der Neukonstruktion des COLTRIMS-Apparates für den Einsatz an einem Freie-Elektronen-Laser (FEL) einige Rahmenbedingungen erfüllt werden. Besonders wurden die hohen Vakuumvoraussetzungen an den Experimentaufbau aufgrund der enormen Lichtintensität eines FEL beachtet. Das Zusammenspiel der vielen Einzelkomponenten konnte zunächst in mehreren Testreihen überprüft werden. Unter anderem durch Variation der Vakuumbauteile in Material und Beschaffenheit konnten die zuvor ermittelten Vorgaben schließlich erreicht werden. Das neu konstruierte Target-Präparationssystem zur Erzeugung molekularer Gasstrahlen erlaubt nun den Einsatz von bis zu vier unterschiedlich dimensionierten, differentiell gepumpten Stufen. Zudem wurden hochpräzise Piezo-Aktuatoren verbaut, welche die Bewegung von Blenden im Vakuum erlauben, wodurch eine variable Einstellung des lokalen Targetdrucks ermöglicht wird. Die Anpassung der elektrischen Felder des Spektrometers für ein jeweiliges Experiment wurde mittels Simulationen der Teilchentrajektorien, Teilchenflugzeiten sowie der Detektorauflösung durchgeführt.
Da die in dieser Arbeit besprochenen Messungen und Ergebnisse die Wechselwirkungsprozesse von Röntgenstrahlung bzw. Synchrotronstrahlung mit Materie thematisieren, wird die Erzeugung von Synchrotronstrahlung sowohl in Kreisbeschleunigern als auch in den modernen Freie-Elektronen-Lasern (FEL) erklärt und hergeleitet. Der im Röntgenbereich arbeitende Freie-Elektronen-Laser European XFEL, welcher u.A. als Strahlungsquelle für die hier gezeigten Experimente diente, ist eine von derzeit noch wenigen Anlagen ihrer Art weltweit. Seine Lichtintensität in diesem Wellenlängenbereich liegt bis zu acht Größenordnungen über den bisher verwendeten Anlagen für Synchrotronstrahlung.
Beim ersten Einsatz der neuen Apparatur an der Synchrotronstrahlungsanlage SOLEIL wurde der ultraschnelle Dissoziationsprozess von Chlormethan (CH3Cl) untersucht. Während des Zerfallsprozesses nach Anregung durch Röntgenstrahlung werden hochenergetische Auger-Elektronen emittiert, welche in Koinzidenz mit verschiedenen Molekülfragmenten nachgewiesen wurden. Durch den Zerfallsmechanismus der ultraschnellen Dissoziation wird die Auger-Elektronenemission nach resonanter Molekülanregung während der Dissoziation des Moleküls beschrieben. Die kinetische Energie des Auger-Elektrons ist dabei abhängig von seinem Emissionszeitpunkt. Somit können die gemessenen Auger-Elektronen ein „Standbild“ der zeitlichen Abfolge des Dissoziationsprozesses liefern.
Es wird eine detaillierte Beschreibung der Datenanalyse vorgenommen, welche aus Kalibrationsmessungen und einer Interpretation der Messdaten besteht. Die abschließende Betrachtung besteht in der Darstellung der Elektronenemissionswinkelverteilungen im molekülfesten Koordinatensystem. Die Winkelverteilung der Auger-Elektronen wird am Anfang der Dissoziation vom umgebenden Molekül- potential beeinflusst und zeigt deutliche Strukturen entlang der Bindungsachse. Entfernen sich die Bindungspartner voneinander und das Auger-Elektron wird währenddessen emittiert, so verschwinden diese Strukturen zunehmend und eine Vorzugsemissionsrichtung senkrecht zur Molekülachse wird sichtbar.
Die Analyse der Messdaten zur Untersuchung von Multiphotonen-Ionisation an Sauerstoff-Molekülen am Freie-Elektronen-Laser European XFEL ermöglichte unter anderem die Beobachtung „hohler Moleküle“, also Systemen mit Doppelinnerschalen- Vakanzen. Solche Zustände können vor allem durch die sequentielle Absorption zweier Photonen entstehen, wobei die hierbei nötige Photonendichte nur von FEL- Anlagen bereit gestellt werden kann. Hier konnte das Ziel erreicht werden, erstmalig die Emissionswinkelverteilungen der Photoelektronen von mehrfach ionisierten Sauerstoff-Molekülen (O+/O3+-Aufbruchskanal) als Folge der ablaufenden Mechanismen femtosekundengenau zu beobachten. Hierzu wurde ein vereinfachtes Schema der verschiedenen Zerfallsschritte erstellt und schließlich ermittelt, dass der Zerfall durch eine PAPA-Sequenz beschrieben werden kann. Bei dieser handelt es sich um die zweimalige Abfolge von Photoionisation und Auger-Zerfall. Somit werden vier positive Ladungen im Molekül erzeugt. Das zweite Photon des XFEL wird dabei während der Dissoziation der sich Coulomb-abstoßenden Fragmente absorbiert, weshalb es sich um einen zweistufigen Prozess aus Anrege- und Abfrage- Schritt (Pump-Probe) handelt. Schlussendlich gelang zudem der Nachweis von Doppelinnerschalen-Vakanzen im Sauerstoff-Molekül nach Selektion des O2+/O2+- Aufbruchkanals. Hierfür konnten die beiden Möglichkeiten einer zweiseitigen oder einseitigen Doppelinnerschalen-Vakanz getrennt betrachtet werden und ebenfalls erstmalig das Verhalten der Elektronenemission dieser beiden Zustände verglichen werden.
Our primary objective is to construct a plausible, unified model of inflation, dark energy and dark matter from a fundamental Lagrangian action first principle, wherein all fundamental ingredients are systematically dynamically generated starting from a very simple model of modified gravity interacting with a single scalar field employing the formalism of non-Riemannian spacetime volume-elements. The non-Riemannian volume element in the initial scalar field action leads to a hidden, nonlinear Noether symmetry which produces an energy-momentum tensor identified as the sum of a dynamically generated cosmological constant and dust-like dark matter. The non-Riemannian volume-element in the initial Einstein–Hilbert action upon passage to the physical Einstein-frame creates, dynamically, a second scalar field with a non-trivial inflationary potential and with an additional interaction with the dynamically generated dark matter. The resulting Einstein-frame action describes a fully dynamically generated inflationary model coupled to dark matter. Numerical results for observables such as the scalar power spectral index and the tensor-to-scalar ratio conform to the latest 2018 PLANCK data.
We estimate the feeddown contributions from decays of unstable A=4 and A=5 nuclei to the final yields of protons, deuterons, tritons, 3He, and 4He produced in relativistic heavy-ion collisions at sNN>2.4 GeV, using the statistical model. The feeddown contribution effects do not exceed 5% at LHC and top RHIC energies due to the large penalty factors involved, but are substantial at intermediate collision energies. We observe large feeddown contributions for tritons, 3He, and 4He at sNN≲10 GeV, where they may account for as much as 70% of the final yield at the lower end of the collision energies considered. Sizable (>10%) effects for deuteron yields are observed at sNN≲4 GeV. The results suggest that the excited nuclei feeddown cannot be neglected in the ongoing and future analysis of light nuclei production at intermediate collision energies, including HADES and CBM experiments at FAIR, NICA at JINR, RHIC beam energy scan and fixed-target programmes, and NA61/SHINE at CERN. We further show that the freeze-out curve in the T-μB plane itself is affected significantly by the light nuclei at high baryochemical potential.
In this paper, we discuss the damping of density oscillations in dense nuclear matter in the temperature range relevant to neutron star mergers. This damping is due to bulk viscosity arising from the weak interaction “Urca” processes of neutron decay and electron capture. The nuclear matter is modelled in the relativistic density functional approach. The bulk viscosity reaches a resonant maximum close to the neutrino trapping temperature, then drops rapidly as temperature rises into the range where neutrinos are trapped in neutron stars. We investigate the bulk viscous dissipation timescales in a post-merger object and identify regimes where these timescales are as short as the characteristic timescale ∼10 ms, and, therefore, might affect the evolution of the post-merger object. Our analysis indicates that bulk viscous damping would be important at not too high temperatures of the order of a few MeV and densities up to a few times saturation density.
Focused electron beam induced deposition (FEBID) is a direct-write nanofabrication technique able to pattern three-dimensional magnetic nanostructures at resolutions comparable to the characteristic magnetic length scales. FEBID is thus a powerful tool for 3D nanomagnetism which enables unique fundamental studies involving complex 3D geometries, as well as nano-prototyping and specialized applications compatible with low throughputs. In this focused review, we discuss recent developments of this technique for applications in 3D nanomagnetism, namely the substantial progress on FEBID computational methods, and new routes followed to tune the magnetic properties of ferromagnetic FEBID materials. We also review a selection of recent works involving FEBID 3D nanostructures in areas such as scanning probe microscopy sensing, magnetic frustration phenomena, curvilinear magnetism, magnonics and fluxonics, offering a wide perspective of the important role FEBID is likely to have in the coming years in the study of new phenomena involving 3D magnetic nanostructures.
In this thesis different descriptions for the non-Abelian Landau-Pomeranchuk-Migdal (LPM) effect are studied within the partonic transport approach BAMPS (Boltzmann Approach to Multi-Parton Scatterings), which numerically solves the 3+1-dimensional Boltzmann equation for massless partons based on elastic and radiative interactions calculated in perturbative quantum chromodynamics.
The LPM effect is a coherence effect originating from the finite formation time of gluon emissions leading to characteristic dependencies of the radiative energy loss of energetic partonic projectiles, as e.g. jets in ultra-relativistic heavy-ion collisions.
Due to this non-locality of interactions, such coherence effects are difficult to describe rigorously in transport theory.
Therefore we compare in this work three different implementations for the LPM effect: i) a parametric LPM suppression based on a theta function in the radiative matrix elements, ii) a stochastic LPM approach, which explicitly simulates the elastic interactions of gluons during their formation time, and iii) the thermal gluon emission rate from the AMY formalism, which is a hard-thermal-loop calculation exactly considering the non-Abelian LPM effect by resumming ladder diagrams in the large medium limit.
After discussing the numerical implementation of the three approaches, we investigate their consequences in different jet-energy loss scenarios: first the academic scenarios of eikonal and non-eikonal jets flying through a static brick of thermal quark-gluon plasma and then jets traversing the expanding medium of ultra-relativistic heavy-ion collisions at LHC energies.
We can demonstrate that although the different LPM approaches show similarities in the radiative energy loss there are differences in the underlying gluon emission spectra, which originate from the specific treatment of divergences in the matrix elements within BAMPS.
Furthermore, based on the different LPM approaches we present simulation results for recent jet quenching observables from the LHC experiments and discuss properties of the underlying heavy-ion medium.
This work presents, to our knowledge, the first completely passive imaging with human-body-emitted radiation in the lower THz frequency range using a broadband uncooled detector. The sensor consists of a Si CMOS field-effect transistor with an integrated log-spiral THz antenna. This THz sensor was measured to exhibit a rather flat responsivity over the 0.1–1.5-THz frequency range, with values of the optical responsivity and noise-equivalent power of around 40 mA/W and 42 pW/√Hz, respectively. These values are in good agreement with simulations which suggest an even broader flat responsivity range exceeding 2.0 THz. The successful imaging demonstratestheimpressivethermalsensitivitywhichcanbeachievedwithsuchasensor. Recording of a 2.3×7.5-cm2-sized image of the fingers of a hand with a pixel size of 1 mm2 at a scanning speed of 1 mm/s leads to a signal-to-noise ratio of 2 and a noise-equivalent temperature difference of 4.4 K. This approach shows a new sensing approach with field-effect transistors as THz detectors which are usually used for active THz detection.
Mit der COLTRIMS-Technik können immer kompliziertere Reaktionen untersucht werden, dabei steigt aber die Zahl der zu detektierenden Reaktionsfragmente. Der Nachweis von Ionen ist üblicherweise gut möglich, da die entsprechenden Flugzeiten groß sind im Vergleich zur Totzeit der benutzten Detektoren. Elektronen hingegen sind sehr leicht und erreichen den Detektor innerhalb von wenigen 10 ns. Aktuelle Detektoren erlauben aber nur den Nachweis weniger Elektronen und es werden somit neue Detektoren benötigt, um alle Teilchen nachzuweisen. Ziel dieser Arbeit war es also, einen Detektor zu entwickeln, der dies erreicht.
Zu Beginn dieser Monografie wird die COLTRIMS-Technik vorgestellt. Die Experimente mit dieser Messmethode finden hauptsächlich mit einer Laufzeitanode statt. Diese stößt aber bei dem Nachweis von mehreren Teilchen an ihre Grenzen und manche Experimente können nur unvollständig analysiert werden.
Damit ein neuer Detektor entwickelt werden kann, muss erst verstanden werden, wie die zu detektierenden Teilchen/Signale entstehen und wie ihre Eigenschaften sind. Aus diesem Grund wird das Sekundärteilchen-erzeugende MCP ausführlich vorgestellt.
Weiterhin gibt diese Arbeit einen umfassenden Überblick über bereits realisierte Anoden. Verschiedene Repräsentanten der fünf Anodenarten (Flächen-, Streifen-/Pixel-, Laufzeit-, Kamera-, sowie Halbleiter-Anode) werden vorgestellt und bewertet.
Mit diesem Wissen konnten drei Ansätze für neue Anoden entwickelt, designt, produziert, getestet und bewertet werden. Alle neu entwickelten Anoden benutzen Leiterplatinen als Basis und werden in derselben Vakuumkammer getestet. Auch wenn die Detektionsprinzipien der drei getesteten Detektoren unterschiedlich sind, so verläuft die Auskopplung, Verarbeitung und Digitalisierung der Signale nach dem gleichen Schema. Außerdem wurden im Rahmen dieser Arbeit diverse Algorithmen entwickelt und programmiert, mit deren Hilfe die Signalauswertung und Positionsbestimmung erfolgt.
Das dritte Kapitel beschreibt die neu entwickelte Draht-Harfen-Anode. Dieser Detektor besteht aus vielen kurzen Drähten die parallel auf Rahmen aus Leiterplatinen gespannt werden. Aus dieser Anode ließ sich im Rahmen dieser Arbeit aber kein funktionsfähiger Detektor entwickeln und es wird empfohlen, diesen Ansatz nicht weiterzuverfolgen.
Im Kapitel über die Pixel-Anode mit Streifenauslese wird ein Ansatz vorgestellt, bei dem die Elektronenwolke von einem Muster aus leitenden Rauten absorbiert wird. Es wurde ein funktionsfähiger Detektor mit MAMA-Verschaltung realisiert. Die aktive Fläche ist mit einem Durchmesser von 50 mm aber zu klein. Eine große Variante der Anode ist in der realisierten Form aber nicht als Detektor geeignet.
Als dritter neuer Detektor wird die Streifen-Laufzeit-Anode beschrieben. Diese besteht aus einem rechteckigen Muster von Pixeln, die in einer Richtung über eine Zeitverzögerung ausgelesen werden. Dieser Ansatz ist sehr vielversprechend und es ließen sich nicht nur einzelne Teilchen nachweisen, sondern auch beim Aufbruch eines D2+-Moleküls konnten beide Fragmente gemessen werden.
Das letzte Kapitel befasst sich mit weiteren Konzepten, die als Detektor realisiert werden könnten.
Radar technology in the millimeter-wave frequency band offers many interesting features for wind park surveillance, such as structural monitoring of rotor blades or the detection of bats and birds in the vicinity of wind turbines (WTs). Currently, the majority of WTs are affected by shutdown algorithms to minimize animal fatalities via direct collision with the rotor blades or barotrauma effects. The presence of rain is an important parameter in the definition of those algorithms together with wind speed, temperature, time of the day, and season of the year. A Ka-band frequency-modulated continuous-wave radar (33.4-36.0 GHz) installed at the tower of a 2-MW WT was used during a field study. We have observed characteristic rain-induced patterns, based on the range-Doppler algorithm. To better understand those signatures, we have developed a laboratory experiment and implemented a numerical modeling framework. Experimental and numerical results for rain detection and classification are presented and discussed here. Based on this article, a bat- and bird-friendly adaptive WT control can be developed for improved WT efficiency in periods of rain and, at the same time, reduced animal mortality.
This thesis discusses important questions of the beam dynamics in the proton-lead operation in the Large Hadron Collider (LHC) at CERN in Geneva. In two time blocks of several weeks in the years 2013 and 2016, proton-lead collisions have so far been successfully generated in the LHC and used by the experiments at the LHC. One reason for doubts regarding the successful operation in proton-lead configuration was the fact that the beams have to be accelerated with different revolution frequencies. There is long-range repulsion between the beams, since both beams share the beam chamber around the interaction points. Because of the different revolution frequencies, the positions of the interaction between the beams shift each revolution. This can lead to resonant excitation and to an increase in the transverse beam emittance, as was observed in the Relativistic Heavy-Ion Collider (RHIC). In this thesis, simulations for the LHC, RHIC and the High-Luminosity Large Hadron Collider (HL-LHC) are performed with a new model. The results for RHIC show relative growth rates of the emittances of the gold beam in gold-deuteron operation in RHIC from 0.1 %/s to 1.5 %/s. Growth rates of this magnitude were observed experimentally in RHIC. Simulations for the LHC show no significant increase of the emittance of the lead beam for different intensities of the counter-rotating beam. The simulation results confirm the measured stability of the beams in the LHC and the issue of strongly increasing emittances in RHIC is reproduced. Also, no significant increase of the emittance is predicted for the Future Circular Collider (FCC) and the HL-LHC.
Using a frequency-map analysis, this work verifies whether the interaction of the lead beam with the much smaller proton beam in the proton-lead operation of the LHC leads to diffusion within the lead beam. Experiences at HERA at DESY in Hamburg and at SppS at CERN have shown that the lifetime of the larger beam can rapidly decrease under certain circumstances. The results of the simulation show no chaotic dynamics near the beam centre of the lead beam. This result is supported by experimental observation.
A program code has been developed which calculates the beam evolution in the LHC by means of coupled differential equations. This study shows that the growth rates of the lead beam due to intra-beam scattering is overestimated and that particle bunches of the lead beam lose more intensity than assumed in the model. The analysis also shows that bunches colliding in a detector suffer additional losses that increase with decreasing crossing angle at the interaction point.
In this work, 2016 data from beam-loss monitors in combination with the luminosity and the loss rate of the beam intensity are used to determine the cross section of proton-lead collisions at the center-of-mass energy of 8.16 TeV. Beam-loss monitors that mainly detect beam losses that are not caused by the collision process itself are used to determine the total cross section via regression. An analysis of the data recorded in 2016 at the center-of-mass energy of 8.16 TeV resulted in a total cross section of σ=(2.32±0.01(stat.)±0.20(sys.)) b. This corresponds approximately to a hadronic cross section of σ(had)=(2.24±0.01(stat.)±0.21(sys.)) b. This value deviates only by 5.7 % from the theoretical value σ(had)=(2.12±0.01) b.
The simulation code for determining the beam evolution is also used to estimate the integrated luminosity of a future one-month run with proton-lead collisions. The result of the study shows that in the future the luminosity in the ATLAS and CMS experiments will increase from 15/nb per day in 2016 to 30/nb per day, which is a significant increase in terms of the performance. This operation, however, requires the use of the TCL collimators to protect the dispersion suppressors at ATLAS and CMS from collision fragments.
This work also gives an outlook on the expected luminosity production in proton-nucleus operation using ion species lighter than lead ions. For example, a change from proton-lead to proton-argon collisions would increase the integrated luminosity from monthly 0.8/nb to 9.4/nb in ATLAS and CMS. This is an increase of one order of magnitude and approximately a doubling of the integrated nucleon-nucleon luminosity. There may be a test operation with proton-oxygen collisions in 2023, which will last only a few days and will be operated with a low luminosity. The LHCf experiment (LHCb experiment) would achieve the desired integrated luminosity of 1.5/nb (2/nb) within 70h (35h) beam time.
Chiralität ist in der belebten Natur ein omnipräsentes Phänomen und beschreibt die Symmetrieeigenschaft eines Objektes, dass dieses von seinem Spiegelbild unterscheidbar ist. Die bisherigen Untersuchungen der Wechselwirkung zwischen chiralen Molekülen und Licht fokussieren sich auf das Regime der Ein- und Multiphoton-Ionisation und wird mit dieser Arbeit um Untersuchungen im Starkfeldregime erweitert. Im Rahmen dieser Arbeit wurden Experimente an einzelnen chiralen Molekülen in starken Laserfeldern vorbereitet, durchgeführt, analysiert und alle geladenen Fragmente in Koinzidenz untersucht.
Die Präsentation der Ergebnisse orientierte sich an der Reihenfolge, in der auch die Datenauswertung von Vielteilchenaufbrüchen vonstattengeht: Zunächst wurde der Dichroismus in den Photoionen (PICD) auf chirale Signale in integraler differentieller Form untersucht, dann wurde die Asymmetrien in den Elektronenverteilungen vorgestellt und abschließend die Zusammenhänge zwischen den Ionen- und Elektronenverteilungen aufgezeigt.
Kapitel 6 untersuchte die (differentielle) Ionisations- und Fragmentationswahrscheinlichkeit von verschiedenen chiralen Molekülen. Die in Kapitel 6.1 präsentierten Daten verknüpften erstmals den bereits in der Literatur diskutierten Zirkulardichroismus in den Zählraten von Photoionen (PICD) mit dem signalstärkeren differentiellen PICD in der Einfachionisation von Methyloxiran. Dissoziiert das Molekül nach der Ionisation rasch genug, gewährt der Impulsvektor des geladenen Fragments Zugang zu einer Fragmentationsachse. Durch die Auflösung nach einer Molekülachse ist der beobachtete PICD fast eine Größenordnung stärker, als der über alle Raumrichtungen integrierte.
In steigender Komplexität wurde in Kapitel 6.2 eine Fragmentation in vier Teilchen von Molekülen aus einem racemischen Gemisch von CHBrClF untersucht. Über die Auswertung eines Spatproduktes aus den Impulsvektoren konnte für jedes Molekül dessen Händigkeit bestimmt und der vollständig differentielle PICD untersucht werden. Durch das Festhalten einer Fragmentationsachse (analog zu Kapitel 6.1) konnten um einen Faktor vier stärkere PICD-Signale und durch das Auflösen nach der vollständigen Molekülorientierung die Signalstärke des PICD um einen Faktor von etwa 16 in den Bereich einiger Prozente gebracht werden. Leider übersteigt die theoretische Beschreibung dieses Prozesses den aktuellen Stand der Forschung weit. Daher kann nicht ausgeschlossen werden, dass nicht ein Beitrag zur PICD-Signalverstärkung auch aus der Dynamik der sequentiellen vielfachen Ionisation stammt.
Die untersuchte Reaktion in Kapitel 6.3 war der Fünf-Teilchenaufbruch der achiralen Ameisensäure. In der Messung aller ionischen Fragmente konnten analog zu dem vorherigen Kapitel die internen Koordinaten sowie die Orientierung des Moleküls ermittelt werden. Tatsächlich wurde von einer chiralen Fragmentation der achiralen Ameisensäure berichtet. Welches Enantiomer in der Fragmentation beobachtet wird, hängt maßgeblich von der Molekülorientierung relativ zum ionisierenden Laserpuls ab. Diese Erkenntnis könnte zu neuen Ansätzen für Laserkatalysierte enantioselektive Reaktionen führen. Darüber hinaus konnte gezeigt werden, dass die beobachtete Händigkeit des Moleküls nicht nur von seiner Orientierung, sondern auch von der Helizität des ionisierenden Laserpulses abhängt. Dieser differentielle PICD an der Ameisensäure zeigte sich neben einer sehr großen Signalstärke von über 20 % auch als sensitive Probe für die molekulare Struktur.
In Kapitel 7 wurden die Untersuchungen an den 3-dimensionalen Impulsverteilungen der Photoelektronen vorgestellt. Zunächst wird hierzu auf die allgemeine Form des Dichroismus in den Photoelektronen (PECD) im Starkfeldregime eingegangen und die vorherrschenden Symmetrien des Ionisationsregimes herausgearbeitet (Kapitel 7.1). Mit leicht steigender Komplexität konnte eine klare Verbindung zwischen der Asymmetrie in der Elektronenverteilung und dem Schicksal des zurückbleibenden molekularen Ions anhand der Einfachionisation von Methyloxiran herausgearbeitet werden (Kapitel 7.2). Dies hat eine wichtige Auswirkung auf die Nutzbarkeit des PECD im Starkfeldregime als Analysemethode für Chemie und Pharmazie: Der über alle Fragmentationskanäle integrierte PECD ist sensitiv auf die Gewichtung der Fragmente und damit auch auf beispielsweise die maximale Laserintensität. Die Daten legen nahe, dass die Abhängigkeit des PECD von dem Fragmentationskanal auf die unterschiedliche Auswahl von Subensembles molekularer Orientierungen zurückzuführen ist.
Bei Verwendung von elliptisch polarisiertem Licht treten gegenüber der zirkularen Polarisation eine Reihe neuer Effekte auf (Kapitel 7.3). Zunächst zeigt der PECD auch im Starkfeldregime eine nicht lineare Sensitivität auf den Polarisationszustand, welche sich auch als Funktion des Elektronentransversalimpulses und dem Fragmentationskanal ändert. Somit ist die Verwendung von elliptisch polarisiertem Licht bestens für die chirale Erkennung geeignet, wie inzwischen auch in der Literatur bestätigt wurde. Darüber hinaus führt die gebrochene Rotationssymmetrie bei elliptisch polarisiertem Licht zu einer Elektronenimpulsverteilung, welche selbst chiral ist: Der PECD variiert je nach Winkel φ in der Polarisationsebene, wobei die Extrema des PECD nicht mit den Maxima der Zählraten übereinstimmen. Als neue chirale Beobachtungsgröße konnten wir eine enantiosensitive und vorwärts-/rückwärtsasymmetrische Rotation der Zählratenmaxima einführen. Als abgeleitete Größe aus derselben drei-dimensionalen Elektronenverteilung ist diese Beobachtungsgröße jedoch untrennbar verknüpft mit dem ϕ-abhängigen PECD.
Kapitel 8 verknüpfte das (partielle) Wissen um die molekulare Orientierung und den PICD mit den Asymmetrien der Elektronenverteilung für die Messung der fünffach-Ionisation von Ameisensäure (Kapitel 8.1), der vierfach-Ionisation von CHBrClF (Kapitel 8.2) und der Einfachionisation von Methyloxiran (Kapitel 8.3). Im Datensatz der Ameisensäure und dem des CHBrClF zeigte die molekulare Orientierung einen größeren Einfluss auf die Asymmetrie in der Elektronenverteilung als das Enantiomer oder die Helizität des Lichtes. Diese Verknüpfung zwischen Molekülorientierung und Elektronenasymmetrie überträgt die Asymmetrien des PICD auf die Elektronenverteilung. Die Messung an Methyloxiran relativiert diesen Zusammenhang jedoch in dem dieser in dieser Stärke nur bei manchen Fragmentationskanälen auftritt. Offenbar ist die Übertragung der Asymmetrie der differentiellen Ionisationswahrscheinlichkeit nur einer der Mechanismen, welcher zu Elektronasymmetrien im Starkfeldregime führt.
In this work a nonlinear evolution of pure states of a finite dimensional quantum system is introduced, in particular a Riccati evolution equation.
It is shown how this class of dynamics is actually a Hamiltonian dynamics in the complex projective space.
In this projective space it is shown that there is a nonlinear superposition rule, consistent with its linear counterpart in the Hilbert space. As an example, the developed nonlinear formalism is applied to the semiclassical Jaynes–Cummings model.
Later, it is shown that there is an inherent nonlinear evolution in the dynamics of the so-called generalized coherent states.
To show this, the fact that in quantum mechanics it is possible to immerse a ''classical'' manifold into the Hilbert space is employed, such that one may parametrize the time-dependence of the wave function through the variation of parameters in the classical manifold.
The immersion allows to consider the so-called principle of analogy, i.e. using the procedures and structures available from the classical setting to employ them in the quantum setting.
Finally, it is introduced the contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and it is showed that it is a natural candidate for a geometric description of non-dissipative and dissipative systems.
Envy, the inclination to compare rewards, can be expected to unfold when inequalities in terms of pay-off differences are generated in competitive societies. It is shown that increasing levels of envy lead inevitably to a self-induced separation into a lower and an upper class. Class stratification is Nash stable and strict, with members of the same class receiving identical rewards. Upper-class agents play exclusively pure strategies, all lower-class agents the same mixed strategy. The fraction of upper-class agents decreases progressively with larger levels of envy, until a single upper-class agent is left. Numerical simulations and a complete analytic treatment of a basic reference model, the shopping trouble model, are presented. The properties of the class-stratified society are universal and only indirectly controllable through the underlying utility function, which implies that class-stratified societies are intrinsically resistant to political control. Implications for human societies are discussed. It is pointed out that the repercussions of envy are amplified when societies become increasingly competitive.
Direct nanoscopic observation of plasma waves in the channel of a graphene field-effect transistor
(2020)
Plasma waves play an important role in many solid-state phenomena and devices. They also become significant in electronic device structures as the operation frequencies of these devices increase. A prominent example is field-effect transistors (FETs), that witness increased attention for application as rectifying detectors and mixers of electromagnetic waves at gigahertz and terahertz frequencies, where they exhibit very good sensitivity even high above the cut-off frequency defined by the carrier transit time. Transport theory predicts that the coupling of radiation at THz frequencies into the channel of an antenna-coupled FET leads to the development of a gated plasma wave, collectively involving the charge carriers of both the two-dimensional electron gas and the gate electrode. In this paper, we present the first direct visualization of these waves. Employing graphene FETs containing a buried gate electrode, we utilize near-field THz nanoscopy at room temperature to directly probe the envelope function of the electric field amplitude on the exposed graphene sheet and the neighboring antenna regions. Mapping of the field distribution documents that wave injection is unidirectional from the source side since the oscillating electrical potentials on the gate and drain are equalized by capacitive shunting. The plasma waves, excited at 2 THz, are overdamped, and their decay time lies in the range of 25-70 fs. Despite this short decay time, the decay length is rather long, i.e., 0.3-0.5 μm, because of the rather large propagation speed of the plasma waves, which is found to lie in the range of 3.5-7 × 106 m/s, in good agreement with theory. The propagation speed depends only weakly on the gate voltage swing and is consistent with the theoretically predicted 1/4 power law.
A central motivation for the development of x-ray free-electron lasers has been the prospect of time-resolved single-molecule imaging with atomic resolution. Here, we show that x-ray photoelectron diffraction—where a photoelectron emitted after x-ray absorption illuminates the molecular structure from within—can be used to image the increase of the internuclear distance during the x-ray-induced fragmentation of an O2 molecule. By measuring the molecular-frame photoelectron emission patterns for a two-photon sequential K-shell ionization in coincidence with the fragment ions, and by sorting the data as a function of the measured kinetic energy release, we can resolve the elongation of the molecular bond by approximately 1.2 a.u. within the duration of the x-ray pulse. The experiment paves the road toward time-resolved pump-probe photoelectron diffraction imaging at high-repetition-rate x-ray free-electron lasers.
We study D and DS mesons at finite temperature using an effective field theory based on chiral and heavy-quark spin-flavor symmetries within the imaginary-time formalism. Interactions with the light degrees of freedom are unitarized via a Bethe-Salpeter approach, and the D and self-energies are calculated self-consistently. We generate dynamically the e D∗0(2300)and Ds(2317)state, and study their possible identification as the chiral We study Dand Dsmesons at finite temperature using an effective field theory based on chiral and heavy-quark spin-flavor symmetries within the imaginary-time formalism. Interactions with the light degrees of freedom are unitarized via a Bethe-Salpeter approach, and the Dand Dsself-energies are calculated self-consistently. We generate dynamically the D∗0(2300)and Ds(2317)states, and study their possible identification as the chiral partners of the Dand Dsground states, respectively. We show the evolution of their masses and decay widths as functions of temperature, and provide an analysis of the chiral-symmetry restoration in the heavy-flavor sector below the transition temperature. In particular, we analyse the very special case of the D-meson, for which the chiral partner is associated to the double-pole structure of the D∗0(2300).
he Pauli Exclusion Principle (PEP) is one of the most basic concepts in physics, but also the most difficult to implement in many-fermion systems, which are common in nuclear physics. To investigate the consequences of ignoring the PEP, we discuss several algebraic models in nuclear structure physics, in particular cluster models. Sometimes they tend to ignore the Pauli Exclusion Principle for practical reasons, leading to flawed interpretations. Though at first sight there seems to be an agreement to experiment, often it is due to the limited number of states known experimentally. We discuss several models which include or not the PEP, illustrating through their differences the importance of the PEP. This contribution is also a review of recently published results.
First, we propose a scale-invariant modified gravity interacting with a neutral scalar inflaton and a Higgs-like SU(2)×U(1) iso-doublet scalar field based on the formalism of non-Riemannian (metric-independent) spacetime volume-elements. This model describes, in the physical Einstein frame, a quintessential inflationary scenario driven by the “inflaton” together with the gravity-“inflaton” assisted dynamical spontaneous SU(2)×U(1) symmetry breaking in the post-inflationary universe, whereas the SU(2)×U(1) symmetry remains intact in the inflationary epoch. Next, we find the explicit representation of the latter quintessential inflationary model with a dynamical Higgs effect as an Eddington-type purely affine gravity.
High-quality single crystals of the unconventional superconductor NdFeAsO1 − xFx were grown. We developed a new optimized flux technique to overcome the difficulties in single-crystal growth and the sample quality limitations of NdFeAsO1 − xFx. The normal state of the F-doped samples exhibits simple metallic behavior upon cooling down from room temperature, followed by a sharp superconducting transition. The values of residual resistivity ratio (RRR) is 3.2, 6.4, and 10.3 for x = 0.1, 0.15, and 0.2, respectively. Both the large RRR and the narrow superconducting transition signpost the high quality of the crystals. We have examined the in- and out-of-plane lower critical fields, and the field at which vortices penetrate the sample of NdFeAsO1 − xFx (x = 0.1). The anisotropy ratio [γHc1 (0)] increased slightly with increasing temperature from 0.8 Tc to Tc. The temperature dependence of the first vortex penetration field was obtained under the static magnetic field, H, parallel to the c- and ab- axis, and pronounced changes in the Hc1(T) curvature were observed, which are attributed to the multi-band superconductivity.
The production of light (anti-)(hyper-)nuclei in heavy-ion collisions at the LHC is considered in the framework of the Saha equation, making use of the analogy between the evolution of the early universe after the Big Bang and that of “Little Bangs” created in the lab. Assuming that disintegration and regeneration reactions involving light nuclei proceed in relative chemical equilibrium after the chemical freeze-out of hadrons, their abundances are determined through the famous cosmological Saha equation of primordial nucleosynthesis and show no exponential dependence on the temperature typical for the thermal model. A quantitative analysis, performed using the hadron resonance gas model in partial chemical equilibrium, shows agreement with experimental data of the ALICE collaboration on d, 3He, HΛ3, and 4He yields for a very broad range of temperatures at T≲155 MeV. The presented picture is supported by the observed suppression of resonance yields in central Pb–Pb collisions at the LHC. Keywords: Light (anti-)(hyper-)nuclei production, Saha equation, Partial chemical equilibrium.
Rethinking superdeterminism
(2020)
Quantum mechanics has irked physicists ever since its conception more than 100 years ago. While some of the misgivings, such as it being unintuitive, are merely aesthetic, quantum mechanics has one serious shortcoming: it lacks a physical description of the measurement process. This “measurement problem” indicates that quantum mechanics is at least an incomplete theory—good as far as it goes, but missing a piece—or, more radically, is in need of complete overhaul. Here we describe an approach which may provide this sought-for completion or replacement: Superdeterminism. A superdeterministic theory is one which violates the assumption of Statistical Independence (that distributions of hidden variables are independent of measurement settings). Intuition suggests that Statistical Independence is an essential ingredient of any theory of science (never mind physics), and for this reason Superdeterminism is typically discarded swiftly in any discussion of quantum foundations. The purpose of this paper is to explain why the existing objections to Superdeterminism are based on experience with classical physics and linear systems, but that this experience misleads us. Superdeterminism is a promising approach not only to solve the measurement problem, but also to understand the apparent non-locality of quantum physics. Most importantly, we will discuss how it may be possible to test this hypothesis in an (almost) model independent way.
The third dataset dedicated to the Open Guided Waves platform aims at carbon fiber composite plates with an additional omega stringer at constant temperature conditions. The two structures used in this work are representative for real aircraft components. Comprehensive measurements were recorded in order to study (I) the impact of the omega stringer on guided wave propagation, and (II) elliptical reference damages of different sizes located at three separate positions on the structure. Measurements were recorded for narrowband excitation (5-cycle toneburst with varying carrier frequencies) and broadband excitation (using chirp waveforms). The paper presents the results of a technical validation including numerical modelling, and enables further research, for example related to probability of detection (POD) analysis.
In power systems, flow allocation (FA) methods enable to allocate the usage and costs of the transmission grid to each single market participant. Based on predefined assumptions, the power flow is split into isolated generator-specific or producer-specific sub-flows. Two prominent FA methods, Marginal Participation (MP) and Equivalent Bilateral Exchanges (EBEs), build upon the linearized power flow and thus on the Power Transfer Distribution Factors (PTDFs). Despite their intuitive and computationally efficient concepts, they are restricted to networks with passive transmission elements only. As soon as a significant number of controllable transmission elements, such as high-voltage direct current (HVDC) lines, operate in the system, they lose their applicability. This work reformulates the two methods in terms of Virtual Injection Patterns (VIPs), which allows one to efficiently introduce a shift parameter q to tune contributions of net sources and net sinks in the network. In this work, major properties and differences in the methods are pointed out, and it is shown how the MP and EBE algorithms can be applied to generic meshed AC-DC electricity grids: by introducing a pseudo-impedance ω¯ , which reflects the operational state of controllable elements and allows one to extend the PTDF matrix under the assumption of knowing the current flow in the system. Basic properties from graph theory are used to solve for the pseudo-impedance in dependence of the position within the network. This directly enables, e.g., HVDC lines to be considered in the MP and EBE algorithms. The extended methods are applied to a low-carbon European network model (PyPSA-EUR) with a spatial resolution of 181 nodes and an 18% transmission expansion compared to today’s total transmission capacity volume. The allocations of MP and EBE show that countries with high wind potentials profit most from the transmission grid expansion. Based on the average usage of transmission system expansion, a method of distributing operational and capital expenditures is proposed. In addition, it is shown how injections from renewable resources strongly drive country-to-country allocations and thus cross-border electricity flows.
We study the influence of the baryon chemical potential μB on the properties of the Quark–Gluon–Plasma (QGP) in and out-of equilibrium. The description of the QGP in equilibrium is based on the effective propagators and couplings from the Dynamical QuasiParticle Model (DQPM) that is matched to reproduce the equation-of-state of the partonic system above the deconfinement temperature Tc from lattice Quantum Chromodynamics (QCD). We study the transport coefficients such as the ratio of shear viscosity η and bulk viscosity ζ over entropy density s, i.e., η/s and ζ/s in the (T,μ) plane and compare to other model results available at μB=0 . The out-of equilibrium study of the QGP is performed within the Parton–Hadron–String Dynamics (PHSD) transport approach extended in the partonic sector by explicitly calculating the total and differential partonic scattering cross sections based on the DQPM and the evaluated at actual temperature T and baryon chemical potential μB in each individual space-time cell where partonic scattering takes place. The traces of their μB dependences are investigated in different observables for symmetric Au + Au and asymmetric Cu + Au collisions such as rapidity and mT -distributions and directed and elliptic flow coefficients v1,v2 in the energy range 7.7 GeV ≤sNN−−−−√≤200 GeV.
An incoming or outgoing hadron in a hard collision with large momentum transfer gets squeezed in the transverse direction to its momentum. In the case of nuclear targets, this leads to the reduced interaction of such hadrons with surrounding nucleons which is known as color transparency (CT). The identification of CT in exclusive processes on nuclear targets is of significant interest not only by itself but also due to the fact that CT is a necessary condition for the applicability of factorization for the description of the corresponding elementary process. In this paper we discuss the semiexclusive processes A(e,e′π+) , A(π−,l−l+) and A(γ,π−p) . Since CT is closely related to hadron formation mechanism, the reduced interaction of ’pre-hadrons’ with nucleons is a common feature of generic high-energy inclusive processes on nuclear targets, such as hadron attenuation in deep inelastic scattering (DIS). We will discuss the novel way to study hadron formation via slow neutron production induced by a hard photon interaction with a nucleus. Finally, the opportunity to study hadron formation effects in heavy-ion collisions in the NICA regime will be considered.
For large isospin asymmetries, perturbation theory predicts the quantum chromodynamic (QCD) ground state to be a superfluid phase of u and d¯ Cooper pairs. This phase, which is denoted as the Bardeen-Cooper-Schrieffer (BCS) phase, is expected to be smoothly connected to the standard phase with Bose-Einstein condensation (BEC) of charged pions at μI≥mπ/2 by an analytic crossover. A first hint for the existence of the BCS phase, which is likely characterised by the presence of both deconfinement and charged pion condensation, comes from the lattice observation that the deconfinement crossover smoothly penetrates into the BEC phase. To further scrutinize the existence of the BCS phase, in this article we investigate the complex spectrum of the massive Dirac operator in 2+1-flavor QCD at nonzero temperature and isospin chemical potential. The spectral density near the origin is related to the BCS gap via a generalization of the Banks-Casher relation to the case of complex Dirac eigenvalues (derived for the zero-temperature, high-density limits of QCD at nonzero isospin chemical potential).