530 Physik
Refine
Year of publication
Document Type
- Article (1958)
- Preprint (1305)
- Doctoral Thesis (592)
- Conference Proceeding (242)
- diplomthesis (101)
- Bachelor Thesis (75)
- Master's Thesis (61)
- Contribution to a Periodical (56)
- Part of Periodical (36)
- Diploma Thesis (34)
Keywords
- Kollisionen schwerer Ionen (47)
- heavy ion collisions (44)
- LHC (25)
- Quark-Gluon-Plasma (25)
- Heavy Ion Experiments (21)
- equation of state (19)
- quark-gluon plasma (19)
- BESIII (16)
- QCD (16)
- Relativistic heavy-ion collisions (16)
Institute
- Physik (4265)
- Frankfurt Institute for Advanced Studies (FIAS) (1391)
- Informatik (978)
- Präsidium (70)
- MPI für Biophysik (43)
- ELEMENTS (40)
- Biochemie und Chemie (18)
- Helmholtz International Center for FAIR (12)
- Biochemie, Chemie und Pharmazie (11)
- Geowissenschaften (9)
Irreversibility, steady state, and nonequilibrium physics in relativistic heavy ion collisions
(1999)
Heavy ion collisions at ultrarelativistic energies offer the opportunity to study the irreversibility of multiparticle processes. Together with the many-body decays of resonances, the multiparticle processes cause the system to evolve according to Prigogine s steady states rather than towards statistical equilibrium. These results are general and can be easily checked by any microscopic string-, transport-, or cascade model for heavy ion collisions. The absence of pure equilibrium states sheds light on the di culties of thermal models in describing the yields and spectra of hadrons, especially mesons, in heavy ion collisions at bombarding energies above 10 GeV/nucleon. PACS numbers: 25.75.-q, 05.70.Ln, 24.10.Lx
Homogeneous nucleation of quark gluon plasma, finite size effects and longlived metastable objects
(1998)
The general formalism of homogeneous nucleation theory is applied to study the hadronization pattern of the ultra-relativistic quark-gluon plasma (QGP) undergoing a first order phase transition. A coalescence model is proposed to describe the evolution dynamics of hadronic clusters produced in the nucle- ation process. The size distribution of the nucleated clusters is important for the description of the plasma conversion. The model is most sensitive to the initial conditions of the QGP thermalization, time evolution of the energy den- sity, and the interfacial energy of the plasma hadronic matter interface. The rapidly expanding QGP is first supercooled by about T = T Tc = 4 6%. Then it reheats again up to the critical temperature Tc. Finally it breaks up into hadronic clusters and small droplets of plasma. This fast dynamics occurs within the first 5 10 fm/c. The finite size e ects and fluctuations near the critical temperature are studied. It is shown that a drop of longitudinally expanding QGP of the transverse radius below 4.5 fm can display a long-lived metastability. However, both in the rapid and in the delayed hadronization scenario, the bulk pion yield is emitted by sources as large as 3 4.5 fm. This may be detected experimentally both by a HBT interferometry signal and by the analysis of the rapidity distributions of particles in narrow pT -intervals at small |pT | on an event-by-event basis. PACS numbers: 12.38.Mh, 24.10.Pa, 25.75.-q, 64.60.Qb
In dieser Arbeit wurden thermodynamische Eigenschaften eines chiralen Quark Meson Modelles untersucht. Das chirale Quark Meson Model beschreibt die starke Wechselwirkung über den Austausch von Mesonen und zudem die thermische und dichteabhängige Entwicklung der Quarkmassen im Medium über die chirale Symmetrie.Im SU(2) Model wurde zunächst in mean field approximation gearbeitet, um im Anschluss den divergenten Vakuumterm mit einzubeziehen. Nach eingehender Untersuchung der Ergebnisse, wurden dann die thermischen Mesonenfluktuationen studiert. In beiden Ansätzen verschiebt die Nullpunktsenergie den chiralen Phasenübergang zu höheren Temperaturen, wodurch die Massen bei höheren Temperaturen entarten. Beide Ansätze wurden dann zu einem gemeinsamen Modell kombiniert, um den Einfluss der Mesonenfluktuationen auf Ordnungsparameter, Massen und thermodynamische Grössen zu untersuchen. Als Fazit der Studie kann behauptet werden, dass sich der Einfluss der Mesonenfluktuationen in grösserem Maÿ auf die Thermodynamik, als auf den Ordnungsparameter und die Massen auswirkt. Im SU(3) Modell wurden ebenfalls regularisiert und zudem Vektormesonen mitberücksichtigt, welche die Repulsion zwischen den einzelnen Freiheitsgraden modelliert. Die Zustandsgleichung wird durch den Vakuum Term etwas softer und zeigt ein ähnliches Verhalten im niederen Energiebereich. Untersucht wurde neben der Temperatur T, die Elektron Baryon Rate Ye, die Sigma Meson Masse noch der Einfluss der Vektorkopplung. Aus der Zustandsgleichung konntendann Isentropen im T-mu Phasendiagramm errechnet werden, welche in naher Zukunft Aufschluss über eine dritte Familie von kompakten Sternen in Zusammenhang mit der entsprechenden Supernova Explosion geben könnte. Um die Existenz von kompakten Sternen genauer zu analysieren, wurde das chiraleSU(3) Quark Meson Modell bei T = 0 benutzt, um über die aus dem Formalismusgewonnenen Grössen Druck und Energiedichte die Tolmann-Oppenheimer-Volkoff zu lösen. Diese stellen die Masse-Radius Beziehungen kompakter Objekte dar. Auf der Suche nach Twin Stern Lösungen aus dem chiralen SU(3) Quark Meson Model wurde zunächst ein Modell für Hybridsterne entwickelt. Im untersuchten Parameterbereich fanden wir Hybrid Stern Lösungen, bei welchen der Einfluss der Quarkmaterie auf die Stabilität des Sternes untersucht wurde, denn das Einsetzen des Phasenüberganges übt einen zusätzlichen gravitativen Zug auf die hadronische Kruste aus. Der Stern ist stabil, wenn der Druck der Quarkmaterie diesem zusätzlichen Zug standzuhalten vermag. Für einen zu grossen Sprung in der Energiedichte werden die Lösungen jedoch instabil. Zwillingssterne waren nicht unter den Lösungen, da der Übergangsdruck relativklein sein muss, während der Energiedichtesprung eher gross sein sollte. Das Auftreten zweier stabiler Äste in der Masse Radius Relation kann allerdingsmit dem SU(3) Modell und entsprechendem chiralen Phasenübergang modelliert werden. Für einen gewissen Parameterbereich einhergehend mit kleinem Wert des Vakuum Druckes B konnten Nicht-Linearitäten in der Zustangsgleichungzur Lösung der TOV Gleichung beitragen. Im Weitern ist das Zusammenspiel der Vektorkopplung und der Sigma Mesonen Masse einflussreich auf die Lösungen, welche auf Kausalität, Stabilität und neben der 2 Sonnenmassen Bedingung noch auf Restriktionen vom millisecond pulsar PSR J1748-2446ad untersucht wurden.Mit Weltraummissionen wie etwa NICER (Neutron star Interior CompositionExploreR) sollte die Radiusbestimmung kompakter Objekte in Zukunft bis auf einen Kilometer genau bestimmt werden können. Die Entdeckung von zweiSternen mit der gleichen Masse und unterschiedlichen Radien wäre in der Tat ein Beweis für die Existenz von Zwillingssternen, welche dann die Theorie des Phasenüberganges in dichter Materie untermauern würde. Das Kollaps-Szenario eines Zwillingssternes würde weiteren Aufschluss über Neutrino-Emmissivität, Gamma-ray burster und Gravitationswellen Signale geben können. Dynamische Simulationen in allgemein relativistischem Kontext für compact star merger mit den hier diskutierten Zustandsgleichungen sind bereits in Planung, um Eigenschaftenwie beispielsweise das Temperatur- und Dichteprofil solcher Objekte genauer zu analysieren.
Problems of production and study of new neutron-enriched heavy nuclei are discussed. Low-energy multinucleon transfer reactions are shown to be quite appropriate for this purpose. Reactions with actinide beams and targets are of special interest for synthesis of new neutron-enriched transfermium nuclei and not-yet-known nuclei with closed neutron shell N = 126 having the largest impact on the astrophysical r-process. The estimated cross sections for the production of these nuclei look very promising for planning such experiments at currently available accelerators. These experiments, however, are rather expensive and difficult to perform because of low intensities of the massive projectile beams and problems of separating and detecting the heavy reaction products. Thus, realistic predictions of the corresponding cross sections for different projectile-target combinations are definitely required. Some uncertainty still remains in the values of several parameters used for describing the low-energy nuclear dynamics. This uncertainty does not allow one to perform very accurate predictions for the productions of new heavier-than-target (trans-target) nuclei in multinucle on transfer reactions. Nevertheless these predictions are rather promising (large cross sections) to start such experiments at available accelerators if the problem of separation of heavy transfer reaction products would be solved.
The present limits of the upper part of the nuclear map are rather close to the beta stability line while the unexplored area of heavy neutron rich nuclides (also those located along the neutron closed shell N = 126 to the right hand side of the stability line) is extremely important for nuclear astrophysics investigations and, in particular, for the understanding of the r-process of astrophysical nucleogenesis. For elements with Z > 100 only neutron deficient isotopes (located to the left of the stability line) have been synthesized so far. The “north-east” area of the nuclear map can be reached neither in fusion–fission reactions nor in fragmentation processes widely used nowadays for the production of new nuclei. Multi-nucleon transfer processes in near barrier collisions of heavy ions seem to be the only reaction mechanism allowing us to produce and explore neutron rich heavy nuclei including those located at the superheavy island of stability. Neutron capture process can be also considered as an alternative method for the production of long-lived neutron rich superheavy nuclei. Strong neutron fluxes might be provided by nuclear reactors and nuclear explosions in laboratory frame and by supernova explosions in nature.
There are only 3 methods for the production of heavy and superheavy (SH) nuclei, namely, fusion reactions, a sequence of neutron capture and beta(-) decay and multinucleon transfer reactions. Low values of the fusion cross sections and very short half-lives of nuclei with Z<120 put obstacles in synthesis of new elements. At the same time, an important area of SH isotopes located between those produced in the cold and hot fusion reactions remains unstudied yet. This gap could be filled in fusion reactions of 48Ca with available lighter isotopes of Pu, Am, and Cm. New neutron-enriched isotopes of SH elements may be produced with the use of a 48Ca beam if a 250Cm target would be prepared. In this case we get a real chance to reach the island of stability owing to a possible beta(+) decay of 291114 and 287112 nuclei formed in this reaction with a cross section of about 0.8 pb. A macroscopic amount of the long-living SH nuclei located at the island of stability may be produced by using the pulsed nuclear reactors of the next generation only if the neutron fluence per pulse will be increased by about three orders of magnitude. Multinucleon transfer processes look quite promising for the production and study of neutron-rich heavy nuclei located in upper part of the nuclear map not reachable by other reaction mechanisms. Reactions with actinide beams and targets are of special interest for synthesis of new neutron-enriched transfermium nuclei and not-yet-known nuclei with closed neutron shell N=126 having the largest impact on the astrophysical r-process. The estimated cross sections for the production of these nuclei allows one to plan such experiments at currently available accelerators.
This Ph. D. thesis with the title "Characterisation of laser-driven radiation beams: Gamma-ray dosimetry and Monte Carlo simulations of optimised target geometry for record-breaking efficiency of MeV gamma-sources" is dedicated to the study of the acceleration of electrons by intense sub-picosecond laser pulses propagating in a sub-millimeter plasma with near-critical electron density (NCD) and resulting generation of the gamma bremsstrahlung and positrons in the targets of different materials and thickness.
Laser-driven particle acceleration is an area of increasing scientific interest since the recent development of short pulse, high-intensity laser systems. The interaction of intense high-energy, short-pulse lasers with solid targets leads to the production of high-energy electrons in the relativistic laser intensity regime of more than 1018 W /cm2. These electrons play the leading role in the first stage of the interaction of laser with matter, which leads to the creation of laser sources of particles and radiation. Therefore, the optimisation of the electron beam parameters in the direction of increasing the effective temperature and beam charge, together with a slight divergence, plays a decisive role, especially for further detection and characterisation of laser-driven photon and positron beams.
In the context of this work, experiments were carried out at the PHELIX laser system (Petawatt High-Energy Laser for Heavy Ion eXperiments) at GSI Helmholtz Center for Heavy-Ion Research GmbH in Darmstadt, Germany. This thesis presents a thermoluminescence dosimetry (TLD) based method for the measurement of bremsstrahlung spectra in the energy range from 30 keV to 100 MeV. The results of the TLD measurements reinforced the observed tendency towards the strong increase of the mean electron energy and number of super-ponderomotive electrons. In the case of laser interaction with long-scale NCD-plasmas, the dose caused by the gamma-radiation measured in the direction of the laser pulse propagation showed a 1000-fold increase compared to the high contrast shots onto plane foils and doses measured perpendicular to the laser propagation direction for all used combinations of targets and laser parameters.
In this thesis I present novel characterisation method using a combination of TLD measurements and Monte Carlo FLUKA simulations applicable to laser-driven beams. The thermoluminescence detector-based spectrometry method for simultaneous detection of electrons and photons from relativistic laser-induced plasmas initially developed by Behrens et al. (Behrens et al., 2003) and further applied in experiments at PHELIX laser (Horst et al., 2015) delivered good spectral information from keV energies up to some MeV, but as it was presented in (Horst et al., 2015) this method was not really suitable to resolve the content of photon spectra above 10 MeV because of the dominant presence of electrons. Therefore, I created new evaluation method of the incident electron spectra from the readings of TLDs. For this purpose, by means of MatLab programming language an unfolding algorithm was written. It was based on a sequential enumeration of matching data series of the dose values measured by the dosimeters and calculated with of FLUKA-simulations. The significant advantage of this method is the ability to obtain the spectrum of incident electrons in the low energy range from 1 keV, which is very difficult to measure reliably using traditional electron spectrometers.
The results of the evaluation of the effective temperature of super-ponderomotive electrons retrieved from the measured TLD-doses by means of the Monte-Carlo simulations demonstrated, that application of low density polymer foam layers irradiated by the relativistic sub-ps laser pulse provided a strong increase of the electron effective temperature from 1.5 - 2 MeV in the case of the relativistic laser interaction with a metallic foil up to 13 MeV for the laser shots onto the pre-ionized foam and more than 10 times higher charge carried by relativistic electrons.
The progressive simulation method of whole electron spectra described with two -temperatures Maxwellian distribution function has been developed and the results of dose simulations were compared with the acquired experimental data. The advanced feature of this method, which distinguishes it from the results of the simulation of the photon spectrum using the interaction with the target of mono-energetic electron beams (Nilgün Demir, 2013; Nilgün Demir, 2019) or the initial electron spectrum expressed as a function of one electron temperature (Fiorini, 2012), is the ability to simulate the initial electron spectrum described by the Maxwellian distribution function with two temperatures.
The important objective of this thesis was dedicated to the study and characterisation of laser-driven photon beams. In addition to this, the positron beams were evaluated. The investigation of bremsstrahlung photons and positrons spectra from high Z targets by varying the target thickness from 10 µm to 4 mm in simulated models of the interactions of electron spectra with Maxwellian distribution functions allowed to define an optimal thickness when the fluences of photons and positrons are maximal. Furthermore based on the results of FLUKA simulations the gold material was found to be the most suitable for the future experiments as e − γ target because of its highest bremsstrahlung yield.
Additionally Monte Carlo simulations were performed applying the obtained electron beam parameters from the electron acceleration process in laser-plasma interactions simulated with particle-in-cell (PIC) code for two laser energies of 20 J and 200 J. The corresponding electron spectra were imported into a Monte Carlo code FLUKA to simulate the production process of bremsstrahlung photons and positrons in Au converter. FLUKA simulations showed the record conversion of efficiency in MeV gammas can reach 10%, which reinforces the generation of positrons. The obtained results demonstrate the advantages of long-scale plasmas of near critical density (NCD) to increase the parameters of MeV particles and photon beams generated in relativistic laser-plasma interaction. The efficiency of the laser-driven generation of MeV electrons and photons by application of low-density polymer foams is essentially enhanced.
Hot hypernuclear matter is investigated in an explicit SU(3) quark model based on a mean field description of nonoverlapping baryon bags bound by the self-consistent exchange of scalar sigma, zeta and vector omega,phi mesons. The sigma, omega mean fields are assumed to couple to the u, d-quarks while the zeta ,phi mean fields are coupled to the s-quark. The coupling constants of the mean fields with the quarks are assumed to satisfy SU(6) symmetry. The calculations take into account the medium dependence of the bag parameter on the scalar fields sigma, zeta. We consider only the octet baryons N,Lambda,Sigma, Xi in hypernuclear matter. An ideal gas of the strange mesons K and K is introduced to keep zero net strangeness density. Our results for symmetric hypernuclear matter show that a phase transition takes place at a critical temperature around 180 MeV in which the scalar mean fields sigma, zeta take nonzero values at zero baryon density. Furthermore, the bag contants of the baryons decrease significantly at and above this critical temperature indicating the onset of quark deconfinement. The present results imply that the onset of quark deconfinement in SU(3) hypernuclear matter is much stronger than in SU(2) nuclear matter. PACS:21.65.+f, 24.85.+p, 12.39Ba
The properties of strange hadronic matter are studied in the context of the modified quark-meson coupling model using two substantially di erent sets of hyperon-hyperon (Y Y ) interactions. The first set is based on the Nijmegen hard core potential model D with slightly attractive Y Y interactions. The second potential set is based on the recent SU(3) extension of the Nijmegen soft-core potential NSC97 with strongly attractive Y Y interactions which may allow for deeply bound hypernuclear matter. The results show that, for the first potential set, the hyperon does not appear at all in the bulk at any baryon density and for all strangeness fractions. The binding energy curves of the resulting N system vary smoothly with density and the system is stable (or metastable if we include the weak force). However, the situation is drastically changed when using the second set where the hyperons appear in the system at large baryon densities above a critical strangeness fraction. We find strange hadronic matter undergoes a first order phase transition from a N system to a N for strangeness fractions fS > 1.2 and baryonic densities exceeding twice ordinary nuclear matter density. Furthermore, it is found that the system built of N is deeply bound. This phase transition a ects significantly the equation of state which becomes much softer and a substantial drop in energy density and pressure are detected as the phase transition takes place. PACS:21.65.+f, 24.85.+p, 12.39Ba
A new technique developed for measuring nuclear reactions at low momentum transfer with stored beams in inverse kinematics was successfully used to study isoscalar giant resonances. The experiment was carried out at the experimental heavy-ion storage ring (ESR) at the GSI facility using a stored 58Ni beam at 100 MeV/u and an internal helium gas-jet target. In these measurements, inelastically scattered α-recoils at very forward center-of-mass angles (θcm ≤ 1.5°) were detected with a dedicated setup, including ultra-high vacuum compatible detectors. Experimental results indicate a dominant contribution of the isoscalar giant monopole resonance at this very forward angular range. It was found that the monopole contribution exhausts 79+12−11% of the energy-weighted sum rule (EWSR), which agrees with measurements performed in normal kinematics. This opens up the opportunity to investigate the giant resonances in a large domain of unstable and exotic nuclei in the near future. It is a fundamental milestone towards new nuclear reaction studies with stored ion beams.
Fossil dental remains are an archive of unique information for paleobiological studies. Computed microtomography based on X-ray microfocus sources (X-μCT) and Synchrotron Radiation (SR-μCT) allow subtle quantification at the micron and sub-micron scale of the meso- and microstructural signature imprinted in the mineralized tissues, such as enamel and dentine, through high-resolution “virtual histology”. Nonetheless, depending on the degree of alterations undergone during fossilization, X-ray analyses of tooth tissues do not always provide distinct imaging contrasts, thus preventing the extraction of essential morphological and anatomical details. We illustrate here by three examples the successful application of neutron microtomography (n-μCT) in cases where X-rays have previously failed to deliver contrasts between dental tissues of fossilized specimen.
Diese Thesis befasst sich mit dem Problem korrelierter Elektronensysteme in realen Materialien. Ausgangspunkt hierbei ist die quantenmechanische Beschreibung dieser Systeme im Rahmen der sogenannten Kohn-Scham Dichtefunktionaltheorie, welche die Elektronen der Kristallsysteme als effektiv nicht-wechselwirkende Teilchen beschreibt.
Während diese Modellierung im Falle vieler Materialklassen erfolgreich ist, unterscheiden sich die korrelierten Elektronensysteme dadurch, dass der kollektive Charakter der Elektronendynamik nicht zu vernachlässigen ist.
Um diese Korrelationseffekte genauer zu untersuchen, verwenden wir in dieser Arbeit das Hubbard-Modell, welches mit der projektiven Wannierfunktionsmethode aus der Kohn-Scham Dichtefunktionaltheorie konstruiert werden kann.
Das Hubbard-Modell umfasst hierbei nur die lokale Elektron-Elektron-Wechselwirkung auf einem Gitter. Auch wenn das Modell augenscheinlich sehr simpel ist, existieren exakte Lösungen nur in bestimmten Grenzfällen. Dies macht die Entwicklung approximativer Ansätze erforderlich, wobei die Weiterentwicklung der sogenannten Two-Particle Self-Consistent Methode (TPSC) eine zentrale Rolle dieser Arbeit einnimmt.
Bei TPSC handelt es sich um eine Vielteilchenmethode, die in der Sprache funktionaler Ableitungen und sogenannter conserving approximations hergeleitet werden kann.
Der zentrale Gedanke dabei ist, den effektiven Wechselwirkungsvertex als statisch und lokal zu approximieren. Dies wiederum erlaubt die Bewegungsgleichung des Systems
erheblich zu vereinfachen, sodass eine numerische approximative Lösung des Hubbard-Modells möglich wird. Vorsetzung hierbei ist nur, dass sich das System in der normalleitenden Phase befindet und die bei Phasenübergängen entstehenden Fluktuationen nicht zu groß sind.
Während diese Methode ursprünglich von Y. M. Vilk und A.-M. Tremblay für das Ein-Orbital Hubbard-Modell entwickelt wurde, stellen wir in dieser Arbeit eine Erweiterung auf Viel-Orbital-Systeme vor.
Im Falle mehrerer Orbitale treten in der TPSC-Herleitung einzelne Komplikationen auf, die mit weiteren Approximationen behandelt werden müssen. Diese werden anhand eines einfachen Zwei-Orbital Modell-Systems diskutiert und die TPSC-Ergebnisse werden darüber hinaus mit den Ergebnissen der etablierten dynamischen Molekularfeldnährung verglichen.
In diesem Zusammenhang werden auch mögliche zukünftige Erweiterungen bzw. Verbesserungen von TPSC diskutiert.
Ein weiterer wichtiger Aspekt ist die Anwendung von TPSC auf reale Materialien.
In diesem Zusammenhang werden in dieser Arbeit die supraleitenden Eigenschaften der organischen K-(ET)2X Systeme untersucht. Hierbei lassen die TPSC-Resultate darauf schließen, dass das populäre Dimer-Modell, welches zur Beschreibung dieser Materialien herangezogen wird, nicht genügt um die experimentell bestimmten kritischen Temperaturen zu erklären und dass das komplexere Molekülmodell weitere exotische supraleitende Lösungen zulässt.
Schließlich untersuchen wir außerdem die elektronischen Eigenschaften des eisenbasierten Supraleiters LiFeAs und diskutieren inwieweit nicht-lokale Korrelationseffekte, welche durch TPSC aufgelöst werden können, die experimentellen Daten reproduzieren.
One of the most challenging problems in solid state systems is the microscopic analysis of electronic correlations. A paramount minimal model that encodes correlation effects is the Hubbard Hamiltonian, which—regardless of its simplicity—is exactly solvable only in a few limiting cases and approximate many-body methods are required for its solution. In this review, an overview on the non-perturbative two-particle self-consistent method (TPSC), which was originally introduced to describe the electronic properties of the single-band Hubbard model, is presented. A detailed derivation of the multi-orbital generalization of TPSC is introduced here and particular features of the method on exemplary interacting models in comparison to dynamical mean-field theory results are discussed.
Im Rahmen dieser Diplomarbeit sind Ladungsfluktuationen bei Kollisionen von Blei-Kernen bei den Energien 30, 60, 80 und 160 GeV untersucht worden. Das Interesse an den Ladungsfluktuationen beruht darauf, dass sie einen Hinweis auf die Bildung des Quark-Gluon-Plasmas liefern könnten. Im ersten Teil der Arbeit werden mit Hilfe von einfachen Modellen zwei Variablen untersucht, D-tilde und DeltaPhiq, um die optimale Observable zur Messung der Ladungsfluktuationen zu finden. Im zweiten Teil werden experimentelle Resultate präsentiert, die aus den Daten des CERN-SPS-Experimentes NA49 gewonen wurden. Die gemessenen Ladungsfluktuationen entsprechen denen, die von einem Pionen-Gas erwartet werden, wenn die Pionen nur aufgrund der Ladungserhaltung korreliert sind. Es wird jedoch gezeigt, dass diese Resultate nicht der Annahme widersprechen, dass das Quark-Gluon-Plasma bei SPS-Energien gebildet wird.
The properties of two measures of charge fluctuations D-tilde and DeltaPhiq are discussed within several toy models of nuclear collisions. In particular their dependence on mean particle multiplicity, multiplicity fluctuations, and net electric charge are studied. It is shown that the measure DeltaPhiq is less sensitive to these trivial biasing effects than the originally proposed measure D-tilde. Furthermore the influence of resonance decay kinematics is analyzed and it is shown that it is likely to shadow a possible reduction of fluctuations due to QGP creation.
In der Doktorarbeit wurde ein Verfahren zur Ermittlung der Schwerpunkthöhe eines Fahrzeugs aus den Messwerten von Sensoren, die serienmäßig in vielen geländegängigen Fahrzeugen verbaut sind, entwickelt. Dieses Verfahren benötigt nur die Signale von Sensoren des elektronischen Stabilitätssystems (ESP) und eines Fahrwerks mit Luftfeder. Um die Höhe des Schwerpunkts zu bestimmen, wurde ein Modell entworfen, das die Drehbewegung des Fahrzeugs um seine Längsachse beschreibt. Eine der unbekannten Größen in diesem Modell ist das Produkt m_g\Deltah, wobei mit m_g die gefederte Masse des Fahrzeugs und mit Deltah der Abstand zwischen dem Schwerpunkt und der Wankachse des Fahrzeugs bezeichnet wird. Die Höhe des Schwerpunkts wird berechnet, indem zu diesem Abstand der als bekannt vorausgesetzte Abstand der Wankachse von der Straße addiert wird. Es wurden drei Varianten des Modells betrachtet. Die eine Modellvariante (stationäres Modell) beschreibt das Fahrzeugverhalten nur in solchen Fahrsituationen exakt, in denen die Wankgeschwindigkeit und die Wankbeschleunigung vernachlässigbar klein sind. In dieser Modellvariante wurden die Federkräfte mit einem detaillierten Modell der Luftfeder berechnet. Eine Eingangsgröße dieses Modells ist der Druck in den Gummibälgen der Luftfeder. Um diesen Druck zu ermitteln, wurde ein Algorithmus auf dem Steuergerät des Luftfedersystems implementiert. Um die Genauigkeit des Luftfedermodells zu testen und um die Abmessungen bestimmter Bauteile der Luftfeder zu ermitteln, wurden Messungen am Federungsprüfstand durchgeführt und eine Methode entwickelt, wie aus diesen Messungen die gesuchten Größen berechnet werden können. Bei den zwei übrigen Modellvarianten (dynamisches Modell) gelten die Einschränkung für die Fahrsituationen nicht. Die einzelnen Varianten des dynamischen Modells unterscheiden sich darin, dass das eine Mal die Feder- und Dämpferkonstanten als bekannt vorausgesetzt und das andere Mal aus den Sensorsignalen geschätzt werden. Passend zu jeder Modellvariante wurde ein Verfahren gewählt, mit dem Schätzwerte für das Produkt m_g\Deltah berechnet wurden. Des Weiteren wurde auch eine Methode entwickelt, mit der die Masse mg geschätzt wurde, ohne zuvor ein Wert für das Produkt m_g\Deltah zu ermitteln. Die Schätzwerte wurden unter Verwendung von Daten ermittelt, die bei einer Simulation und bei Messfahrten gewonnen worden sind. Das Ergebnis des Vergleiches der betrachteten Modellvarianten ist, dass die eine Variante des dynamischen Modells zum Teil falsche Werte für m_g\Deltah liefert, weil die Modellgleichungen ein nicht beobachtbares System bilden. Die andere Variante dieses Modells liefert nicht bei jeder Beladung exakte Werte, was vor allem daran liegt, dass in den Modellgleichungen dieses Modells ein konstanter Wert für die Federsteifigkeit angenommen wird. Bei Fahrzeugen mit Luftfeder ändert sich jedoch dieser Wert in Abhängigkeit von der Fahrzeugmasse. Die Werte von m_g\Deltah und mg können am genauesten mit dem stationären Modell ermittelt werden. Des Weiteren wurden Methoden entwickelt, die die Genauigkeit der durch den Schätzalgorithmus ermittelten Werte verbessern. So wurde zusätzlich zu dem Produkt m_g\Deltah und der Masse mg auch die Verteilung des Gewichtes auf die Vorder- und Hinterachse betrachtet. Es wurde ermittelt, welche Zusammenhänge zwischen dieser Verteilung und dem Produkt m_g\Deltah sowie zwischen dieser Verteilung und der Masse des Fahrzeugs bestehen. So konnte der Fehler in den Schätzwerten dieser Größen minimiert werden. Außerdem wurde auch der Zusammenhang zwischen dem Produkt m_g\Deltah und der Masse des Fahrzeugs ermittelt. Damit konnten die Schätzwerte dieser Größen genauer bestimmt werden. Aus den so gewonnenen Werten kann die Schwerpunkthöhe von einem Mercedes ML auf etwa 8cm genau berechnet werden. Diese Genauigkeit reicht aus, um das elektronische Stabilitätsprogramm auf die aktuelle Beladung des Fahrzeugs abzustimmen und damit einen Gewinn an Agilität für dieses Fahrzeug zu realisieren.
In der vorliegenden Dissertation werden mit einem chiralen SU(3)-Modell die thermodynamischen Eigenschaften von stark wechselwirkender hadronischer Materie und die mikroskopischen Medium-Eigenschaften von Hadronen bei hohen Temperaturen und hohen Baryonen-Dichten untersucht. Das verwendete chirale Modell ist ein erweitertes sigma-omega-Modell in Mittlerer-Feld-Näherung (Mean-Field) mit baryonischen und mesonischen effektiven Freiheitsgraden; es basiert auf spontan gebrochener chiraler Symmetrie und Skaleninvarianz. Das Phasenübergangsverhalten des chiralen Modells wird systematisch untersucht und dabei gezeigt, dass es signifikant von den Kopplungen zusätzlicher schwererer hadronischer Freiheitsgrade ('Resonanzen') abhängt. Durch entsprechende Ankopplung des niedrigsten baryonischen Dekupletts kann ein Phasendiagramm in qualitativer Übereinstimmung mit aktuellen Vorhersagen der Gitter-QCD erreicht werden. Alternativ wird die Ankopplung einer schweren baryonischen Test-Resonanz untersucht, welche effektiv für das Spektrum der schweren hadronischen Zustände steht. Hier ergibt sich für einen bestimmten Bereich der Kopplungen sogar eine quantitative Übereinstimmung zu den Gitter-QCD-Vorhersagen bei gleichzeitig guter Beschreibung der Grundzustandseigenschaften von Kernmaterie. Für diese Zustandsgleichung werden Vorhersagen (innerhalb der Modellannahmen) zu geplanten Experimenten gemacht -- konkret wird gezeigt, dass der Phasenübergangsbereich für das CBM Experiment des geplanten Beschleunigerzentrums FAIR an der GSI Darmstadt experimentell zugänglich ist. Weiter wird das chirale Modell auf die Beschreibung von experimentellen Teilchenzahlverhältnissen (Yield-Ratios) aus Schwerionen-Kollisionen von AGS, SPS und RHIC angewendet. Studiert werden Parametersätze mit stark unterschiedlichen Phasendiagrammen aufgrund unterschiedlicher Ankopplung des baryonischen Dekupletts sowie ein ideales Hadronengas. Bei den niedrigen und mittleren Kollisionsenergien zeigt sich eine verbesserte Beschreibung durch die chiralen Parametersätze im Vergleich zum idealen Hadronengas, besonders deutlich für Parametersätze mit Phasendiagramm ähnlich der Vorhersage aus der Gitter-QCD. Die Wechselwirkung im chiralen Modell führt zu Medium-Modifikationen der chemischen Potentiale und der Hadronenmassen. Die resultierenden Ausfrierparameter mu und T sind deshalb gegenüber dem nichtwechselwirkenden Fall signifikant verändert. An den Ausfrierpunkten zeigen sich deutliche Abweichungen der effektiven Massen von den Vakuummassen (5 bis 15 %) und des effektiven baryo-chemischen Potentials vom ursprünglichen Wert (bis zu 20 %). Ferner werden universelle Kriterien für das Ausfrieren diskutiert und isentrope Expansion zu den Ausfrierpunkten untersucht, wo sich eine starke Abhängigkeit der Trajektorien von der Zustandsgleichung ergibt. Schließlich wird der Einfluss des Dilaton-Felds (Gluonkondensat) auf das Phasenübergangsverhalten bei mu=0 studiert, indem das Gluonkondensat an die Dekuplett-Baryonen gekoppelt wird. Es zeigt sich, dass dadurch eine Restauration der Skaleninvarianz im Modell möglich wird, die gleichzeitig auch eine vollständige Restauration der chiralen Symmetrie bewirkt. Die Restauration der Skaleninvarianz erfolgt erst bei Temperaturen, die oberhalb der chiralen Restauration (im nichtseltsamen Sektor) liegen. Diese Modellerweiterung ermöglicht es, zukünftig das Phasenübergangsverhalten -- Restauration von chiraler Symmetrie und Skaleninvarianz -- auch bei nichtverschwindenden Baryonendichten zu untersuchen. Die Resultate dieser Arbeit zeigen die Wichtigkeit der schweren hadronischen Zustände, der Resonanzen, für das QCD-Phasendiagramm. Für die Zukunft ist eine Ankopplung des gesamten hadronischen Massenspektrums an das Modell erstrebenswert, wie sich sowohl aus der Untersuchung der Modellerweiterung um eine Test-Resonanz als auch aus der Anwendung auf experimentelle Teilchenzahlverhältnisse ergibt.
A canonical partition function for the two-component excluded volume model is derived, leading to two di erent van der Waals approximations. The one is known as the Lorentz-Berthelot mixture and the other has been proposed recently. Both models are analysed in the canonical and grand canonical ensemble. In comparison with the one-component van der Waals excluded volume model the suppression of particle densities is reduced in these two-component formulations, but in two essentially di erent ways. Presently used multi-component models have no such reduction. They are shown to be not correct when used for components with di erent hard-core radii. For high temperatures the excluded volume interaction is refined by accounting for the Lorentz contraction of the spherical excluded volumes, which leads to a distinct enhancement of lighter particles. The resulting e ects on pion yield ratios are studied for AGS and SPS data.
Subject of this thesis is the non-perturbative investigation of the thermal transition in Quantum Chromodynamics by means of lattice gauge theory and a particular type of lattice fermions, the so-called twisted mass fermions. These fermions offer the possibility of improvement as compared to the standard Wilson-type formulation. We investigate the properties of these fermions at finite temperature, i.e. the structure of the bare parameter space as well as leading order cutoff effects in the weak coupling limit. Then we focus on two-flavour simulations at finite pion mass. We identify the (pseudo-)critical temperatures for our set of pion masses (300 to 500 MeV) and discuss the extrapolation to the chiral limit for which the nature of the transition is still an open question. Besides pseudo-critical temperatures we consider the magnetic equation of state and screening observables. We find that the assumption of a second order transition (in the 3d O(4) universality class) agrees with our data without being able to exclude alternatives. Finally, we discuss the future inclusion of strange and charm quarks in dynamical twisted mass simulations and look at the corresponding cutoff effects in the free limit.
Mit dem Dileptonenspektrometer HADES (High Acceptance Di-Electron Spectrometer) sollen Dielektronen, die bei zentralen Au+Au-Kollisionen der Energie von bis zu 2 GeV/u entstehen, spektroskopiert werden. Zentrale Detektorkomponente ist ein Magnetspektrometer, bestehend aus einem toroidalem Magnetfeld und 24 Driftkammern, die zur Orts- und Impulsbestimmung durch Ablenkung im Magnetfeld verwendet werden. Hohe Raten minimal ionisierender Teilchen, eine Massenauflösung von 1% im Massenbereich von 800 (MeVc) exp -2 sowie eine sichere Signalerkennung und -zuordnung stellen höchste Anforderungen an das Spektrometer, insbesondere an die Driftkammern. Ziel dieser Arbeit ist das grundlegende Verständnis der Funktionsweise der Driftkammern, die bei HADES eingesetzt werden, dazu gehört: (a): das physikalische Verständnis der Funktionsweise, insbesondere - die genaue Kenntnis des Feldverlaufs innerhalb der Kammern, sowie die Eigenschaften des verwendeten Driftkammergases und - die Bestimmung des theoretisch maximal erreichbaren Ortsauflösungsvermögens der Driftkammern, (b): die technische Seite, die den Aufbau der Driftkammern untersucht. Dies ist besonders wichtig, da in den HADES-Simulationsrechnungen aufgrund der großen Anzahl individueller Drähte mit Folien äquivalenter Massen gerechnet wurde. Hilfsmittel zur Untersuchung dieser Fragestellungen waren einerseits Programme, die Monte-Carlo-Methoden verwenden, andererseits Experimente, die an einem Prototyp der HADES-Driftkammern durchgeführt wurden, wobei jedoch der Schwerpunkt dieser Arbeit auf den Simulationrechnungen liegt. Kapitel 1 gibt einen Überblick über die physikalische Motivation von HADES und beschreibt kurz die einzelnen Komponenten des Spektrometers und die Driftkammerphysik. Kapitel 2 geht auf den Aufbau der HADES-Driftkammern ein und stellt die mit Hilfe von Simulationsrechnungen gewonnenen Erkenntnisse über die Kammern vor. Kapitel 3 behandelt die Bestimmung der intrinsischen Auflöosung der Prototyp-Driftkammer. Da dies allein mit Hilfe von Quellenmessungen aufgrund der Vielfachstreuung nicht möglich ist, wurde der Anteil an Vielfachstreuung mit Simulationsrechnungen bestimmt. Kapitel 4 vergleicht die Erkenntnisse über das Verhalten der Driftkammern, die in Kapitel 2 gewonnen wurden, mit einem am SIS (Schwerionen-Synchrotron) gemachten Experiment. Abschließend wird das Modell einer Driftkammer mit realen Drähten mit dem Modell einer Driftkammer verglichen, in der die Drähte durch Folien äquivalenter Massenbelegung ersetzt wurden.
Energy and environment are two major concerns in the 21st century. At present, the energy required for the daily life still mainly relies on the traditional fossil fuel resources, but the caused air pollution problem and greenhouse effect have seriously threatened the sustainable development of mankind. Another adopted energy source which can provide a large fraction of electricity for the world is the nuclear fission reaction. However, the increasing high-radioactive spent nuclear fuels, which half-lives are usually >1 million years, are becoming the hidden perils to the earth. A great advance in accelerator physics and technology opens an opportunity to solve this dilemma between man and nature, because powerful accelerator-based neutron sources can play important roles for clean nuclear power production, for example: - The Accelerator-Driven System (ADS) can serve as an easy control of a sub-critical fission reactor so that the nuclear fuels will be burnt more completely and safely. - The EUROTRANS project launched by EU is investigating another application of the ADS technology to reduce the radiotoxicity and the volume of the existing nuclear waste greatly and quickly in a transmutation way. - The developing international IFMIF plant will be used to test and qualify reactor materials for future fusion power stations, which can produce much cleaner nuclear electricity more efficiently than the fission ones. Therefore, the R&D of high-power driver linacs (HPDL) is of a worldwide importance. As the proverb said, "everything is hard at the beginning", the front end is the most difficult part for realizing an HPDL machine. Based on the RFQ and H-type DTL structures, this dissertation is dedicated to study the beam dynamics in the presence of significantly strong space-charge effects while accelerating intense hardon beams in the low- and medium-beta-region. Besides the 5mA/30mA, 17MeV proton injector (RFQ+DTL) and the 125mA, 40MeV deuteron DTL of the above-mentioned EUROTRANS and IFMIF facilities, a 200mA, 700keV proton RFQ has been also intensively studied for a small-scale but ultra-intense neutron source FRANZ planned at Frankfurt University. The most remarkable properties of the FRANZ RFQ and the IFMIF DTL are the design beam intensities, 200mA and 125mA, which are the record values for the proton and deuteron linacs, respectively. Though the design intensities for the two development stages, XT-ADS (5mA) and EFIT (30mA), of the EUROTRANS injector are well within the capability of the modern RF linac technology, the special design concept for an easy upgrade from XT-ADS to EFIT brings unusual challenges to realize a linac layout which allows flexible operation with different beam intensities. To design the 200mA FRANZ RFQ and the two-intensity EUROTRANS RFQ, the classic LANL (Los Alamos National Laboratory) Four-Section Procedure, which was developed by neglecting the space-charge forces, is not sufficient anymore. Abandoning the unreasonable constant- B (constant-transverse-focusing-strength) law and the resulting inefficient evolution manners of dynamics parameters adopted by the LANL method, a new design approach so-called "BABBLE", which can provide a "Balanced and Accelerated Beam Bunching at Low Energy", has been developed for intense beams. Being consistent with the beam-development process including space-charge effects, the main features of the "BABBLE" strategy (see Pages 55-58) are: 1) At the entrance, the synchronous phase is kept at = phi s = -90° while a gradual increase in the electrode modulation is started so that the input beam can firstly get a symmetrical and soft bunching within a full-360° phase acceptance. 2) In the following main bunching section, B is increasing to balance the stronger and stronger transverse defocusing effects induced by the decreasing bunch size so that the bunching speed can be fast and safely increased. 3) When the real acceleration starts, the quickly increased beam velocity will naturally weaken the transverse defocusing effects, so B is accordingly falling down to avoid longitudinal emittance growths and to allow larger bore apertures. Taking advantage of the gentle initial bunching and the accelerated main bunching under balanced forces enabled by the "BABBLE" strategy, a 2m-long RFQ with beam transmission in excess of 98% and low emittance growths has been designed for FRANZ, and a 4.3m-long RFQ with almost no beam losses and flat emittance evolutions at both 5mA and 30mA has been designed for EUROTRANS. All design results have proven that the "BABBLE" strategy is a general design approach leading to an efficient and robust RFQ with good beam quality in a wide intensity-range from 0mA to 200mA (even higher). To design the IFMIF DTL and the injector DTL part of the EUROTRANS driver linac, which have been foreseen as the first real applications of the novel superconducting CH-DTL structure, intensive attempts have been made to fulfill the design goals under the new conditions, e.g. long drift spaces, SC transverse focusing elements and high accelerating gradients. For the IFMIF DTL, the preliminary IAP design has been considerably improved with respect to the linac layout as well as the beam dynamics. By reserving sufficient drift spaces for the cryosystem, diagnostic devices, tuner and steerer, introducing SC solenoid lenses and adjusting the Linac Design for Intense Hadron Beams accelerating gradients and accordingly other configurations of the cavities (see Pages 78-80), a more realistic, reliable and efficient linac system has been designed. On the other hand, the specifications and positions of the transverse focusing elements (see Pages 81-82) as well as the phase- and energy-differences between the bunch-center particle and the synchronous particle at the beginning of the phi s=0° sections have been totally redesigned (see Pages 83-84) resulting in good beam performances in both radial and longitudinal planes. For the EUROTRANS injector DTL, in addition to the above-mentioned procedures, extra optimization concepts to coordinate the beam dynamics between two intensities, such as employing short adjustable rebunching cavities with phi s = -90° (see Page 116), have been applied. ...
EUROTRANS is a European research program for the transmutation of high level nuclear waste in an accelerator-driven system (ADS). As proposed, the driver linac needs to deliver a 2.5–4 mA, 600 MeV continuous-wave (CW) proton beam and later a 20 mA, 800 MeV one to the spallation target in the prototype-scale and industrial-scale demonstration phases, respectively. This paper is focusing on the conceptual studies performed with respect to the 17 MeV injector. First, the special beam dynamics strategies and methods, which have been developed and applied to design a current-variable injector up to 30 mA for allowing an easy upgrade without additional R&D costs, will be introduced. Then the error study made for evaluating the tolerance limits of the designed injector will be presented as well.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
Type-II multiferroic materials, in which ferroelectric polarization is induced by inversion non-symmetric magnetic order, promise new and highly efficient multifunctional applications based on mutual control of magnetic and electric properties. However, to date this phenomenon is limited to low temperatures. Here we report giant pressure-dependence of the multiferroic critical temperature in CuBr2: at 4.5 GPa it is enhanced from 73.5 to 162 K, to our knowledge the highest TC ever reported for non-oxide type-II multiferroics. This growth shows no sign of saturating and the dielectric loss remains small under these high pressures. We establish the structure under pressure and demonstrate a 60\% increase in the two-magnon Raman energy scale up to 3.6 GPa. First-principles structural and magnetic energy calculations provide a quantitative explanation in terms of dramatically pressure-enhanced interactions between CuBr2 chains. These large, pressure-tuned magnetic interactions motivate structural control in cuprous halides as a route to applied high-temperature multiferroicity.
In this thesis I use effective models to investigate the properties of QCD-like theories at nonzero temperature and baryon chemical potential. First I construct a PNJL model using a lattice spin model with nearestneighbor interactions for the gauge sector and four-fermion interactions for the quarks in (pseudo)real representations of the gauge group. Calculating the phase diagram in the plane of temperature and quark chemical potential in QCD with adjoint quarks, it is qualitatively confirmed that the critical temperature of the chiral phase transition is much higher than the deconfinement transition temperature. At a chemical potential equal to half of the diquark mass in the vacuum, a diquark Bose–Einstein condensation (BEC) phase transition occurs. In the two-color case, a Ginzburg–Landau expansion is used to study the tetracritical behavior around the intersection point of the deconfinement and BEC transition lines which are both of second order. A compact expression for the expectation value of the Polyakov loop in an arbitrary representation of the gauge group is obtained for any number of colors, which allows us to study Casimir scaling at both nonzero temperature and chemical potential. Subsequently I study the thermodynamics of two-color QCD (QC2D) at high temperature and/or density using ZQCD, a dimensionally reduced superrenormalizable effective theory, formulated in terms of a coarse grained Wilson line. In the absence of quarks, the theory is required to respect the Z2 center symmetry, while the effects of quarks of arbitrary masses and chemical potentials are introduced via soft Z2 breaking operators. Perturbative matching of the effective theory parameters to the full theory is carried out explicitly, and it is argued how the new theory can be used to explore the phase diagram of two-color QCD.
We present the first very long baseline interferometric (VLBI) observations of the blazar OJ 287 carried out jointly with the Global Millimeter VLBI Array (GMVA) and the phased Atacama Large Millimeter/submillimeter Array (ALMA) at 3.5 mm on 2017 April 2. The participation of phased ALMA has not only improved the GMVA north–south resolution by a factor of ∼3, but has also enabled fringe detections with signal-to-noise ratios up to 300 at baselines longer than 2 Gλ. The high sensitivity has motivated us to image the data with newly developed regularized maximum likelihood imaging methods, revealing the innermost jet structure with unprecedentedly high angular resolution. Our images reveal a compact and twisted jet extending along the northwest direction, with two bends within the inner 200 μas, resembling a precessing jet in projection. The component at the southeastern end shows a compact morphology and high brightness temperature, and is identified as the VLBI core. An extended jet feature that lies at ∼200 μas northwest of the core shows a conical shape, in both total and linearly polarized intensity, and a bimodal distribution of the linear polarization electric vector position angle. We discuss the nature of this feature by comparing our observations with models and simulations of oblique and recollimation shocks with various magnetic field configurations. Our high-fidelity images also enabled us to search for possible jet features from the secondary supermassive black hole (SMBH) and test the SMBH binary hypothesis proposed for this source.
We have built quasi-equilibrium models for uniformly rotating quark stars in general relativity. The conformal flatness approximation is employed and the Compact Object CALculator (cocal) code is extended to treat rotating stars with surface density discontinuity. In addition to the widely used MIT bag model, we have considered a strangeon star equation of state (EoS), suggested by Lai and Xu, that is based on quark clustering and results in a stiff EoS. We have investigated the maximum mass of uniformly rotating axisymmetric quark stars. We have also built triaxially deformed solutions for extremely fast rotating quark stars and studied the possible gravitational wave emission from such configurations.
We study the effect of thermal charm production on charmonium regeneration in high energy nuclear collisions. By solving the kinetic equations for charm quark and charmonium distributions in Pb+Pb collisions, we calculate the global and differential nuclear modification factors RAA(Npart) and RAA(pt) for J/ψ s. Due to the thermal charm production in hot medium, the charmonium production source changes from the initially created charm quarks at SPS, RHIC and LHC to the thermally produced charm quarks at Future Circular Collider (FCC), and the J/ψ suppression (RAA<1) observed so far will be replaced by a strong enhancement (RAA>1) at FCC at low transverse momentum.
We investigate charmonium production in Pb + Pb collisions at LHC beam energy Elab=2.76A TeV at fixed-target experiment (√sNN = 72 GeV). In the frame of a transport approach including cold and hot nuclear matter effects on charmonium evolution, we focus on the antishadowing effect on the nuclear modification factors RAA and rAA for the J/ψ yield and transverse momentum. The yield is more suppressed at less forward rapidity (ylab ≃ 2) than that at very forward rapidity (ylab ≃ 4) due to the shadowing and antishadowing in different rapidity bins.
In this proceeding we review our recent work using supervised learning with a deep convolutional neural network (CNN) to identify the QCD equation of state (EoS) employed in hydrodynamic modeling of heavy-ion collisions given only final-state particle spectra ρ(pT, Ф). We showed that there is a traceable encoder of the dynamical information from phase structure (EoS) that survives the evolution and exists in the final snapshot, which enables the trained CNN to act as an effective “EoS-meter” in detecting the nature of the QCD transition.
Beam test of the direct plasma injection scheme (DPIS) is carried out successfully for the first time in China, by setting up a comprehensive test and research platform of RFQ and laser ion source. The C6+ beam is accelerated successfully, and the peak beam current reaches more than 6mA which is measured by a Faraday cup of unique structure. The RF power coupled into the RFQ cavity is also examined, and results reveal that it is the RF power of about 195kW that can produce the peak beam current.
Within this thesis, an experimental study of the photo double ionization (PDI) and the simultaneous ionization-excitation is performed for lithium in different initial states Li (1s22l) (l = s, p). The excess energy of the linearly polarized VUV-light is between 4 and 12 eV above the PDI-threshold. Three forefront technologies are combined: a magneto-optical trap (MOT) for lithium generating an ultra-cold and, by means of optical pumping, a state-prepared target; a reaction microscope (ReMi), enabling the momentum resolved detection of all reaction fragments with high-resolution and the free-electron laser in Hamburg (FLASH), providing an unprecedented brilliant photon beam at favourable time structure to access small cross sections. Close to threshold the total as well as differential PDI cross sections are observed to critically depend on the excitation level and the symmetry of the initial state. For the excited state Li (1s22p) the PDI dynamics strongly depends on the alignment of the 2p-orbital with respect to the VUV-light polarization and, thus, from the population of the magnetic substates (mp = 0, ±1). This alignment sensitivity decreases for increasing excess energy and is completely absent for ionization-excitation. Time-dependent close-coupling calculations are able to reproduce the experimental total cross sections with deviations of at most 30%. All the experimental observations can be consistently understood in terms of the long range electron correlation among the continuum electrons which gives rise to their preferential back-to-back emission. This alignment effect, which is observed here for the first time, allows controlling the PDI dynamics through a purely geometrical modification of the target initial state without changing its internal energy.
We propose to measure correlations of heavy-flavor hadrons to address the status of thermalization at the partonic stage of light quarks and gluons in high-energy nuclear collisions, shown on the example of azimuthal correlations of D-Dbar pairs. We show that hadronic interactions at the late stage can not disturb these correlations significantly. Thus, a decrease or the complete absence of these initial correlations indicates frequent interactions of heavy-flavor quarks in the partonic stage. Therefore, early thermalization of light quarks is likely to be reached. PACS numbers: 25.75.-q
The cumulant method is applied to study elliptic flow (v_2) in Au+Au collisions at sqrt s=200 AGeV, with the UrQMD model. In this approach, the true event plane is known and both the non-flow effects and event-by-event spatial (epsilon) and v_2 fluctuations exist. Qualitatively, the hierarchy of v_2 's from two, four and six-particle cumulants is consistent with the STAR data, however, the magnitude of v_2 in the UrQMD model is only 60% of the data. We find that the four and six-particle cumulants are good measures of the real elliptic flow over a wide range of centralities except for the most central and very peripheral events. There the cumulant method is affected by the v_2 fluctuations. In mid-central collisions, the four and six-particle cumulants are shown to give a good estimation of the true differential v_2, especially at large transverse momentum, where the two-particle cumulant method is heavily affected by the non-flow effects.
Elliptic flow analysis at RHIC with the Lee-Yang Zeroes method in a relativistic transport approach
(2006)
The Lee-Yang zeroes method is applied to study elliptic flow (v_2) in Au+Au collisions at sqrt s =200 A GeV, with the UrQMD model. In this transport approach, the true event plane is known and both the nonflow effects and event-by-event v_2 fluctuations exist. Although the low resolutions prohibit the application of the method for most central and peripheral collisions, the integral and differential elliptic flow from the Lee-Yang zeroes method agrees with the exact v_2 values very well for semi-central collisions.
We study the transition from fusion-fission phenomena at about 20 MeV/nucleon multifragmentation at 100–200 MeV/nucleon in the reaction 16O+80Br employing the quantum molecular dynamics model. The time evolution of the density and mass distribution, the charged-particle multiplicity, and spectra as well as angular distributions of light particles are investigated. The results exhibit the transition of the disassembly mechanism, but no sharp change is found. The results are in good agreement with recently measured 4-Pi data.
Ziel dieser Arbeit war, mittels einer (n,γ)-Aktivierung, 129Te zu erzeugen und eine Teilchenzahlbestimmung durchzuführen. Aktivierung der Probe am Forschungsreaktor TRIGA und Spektrenaufnahme mittels eines HPGe-Detektors erfolgten im Mai 2014 am Institut für Kernchemie der Johannes Gutenberg Universität in Mainz.
Die Teilchenzahl des Tochternuklids 129I kann anhand der Teilchenzahlen des Isomers und des Grundzustandes von 129Te berechnet werden. In den Aktivierungen #2 bis #6 wurden (14.27 ± 0.53)x10exp12 Iodnuklide erzeugt. Angegeben ist die maximal mögliche Anzahl von Iodteilchen bei unendlich langer Wartezeit und vollständigem Zerfall aller Tellurnuklide.
Beobachtet werden konnte die Abnahme der Grundzustandsaktivität bis zum Erreichen des Gleichgewichts aus Nachbevölkerung durch das Isomer und Zerfall. Die Grundzustandslinien der Energien von 459.60 keV, 487 keV, 1083 KeV und 1111 keV konnten zu dieser Untersuchung herangezogen werden. Diese 4 Linien erfüllen die erforderten Konsistenzkriterien bezüglich der Systematik und können daher zur Teilchenzahlbestimmung des Grundzustandes verwendet werden (Seite 31).
Der Einfluss der Eigenabsorption ist noch zu untersuchen, da die genaue Position der Probe im Polyethylenbehältnis nicht bestimmt werden konnte. Weiterhin ist die Datenanalyse der ersten Aktivierung aufgrund des Detektorwechsels noch nicht erfolgt. Der Austausch war wegen technischer Probleme notwendig. Ziel weiterführender Untersuchungen ist, eine erneute Halbwertszeitbestimmung des radioaktiven 129I vorzunehmen. Sie ist von Interesse, angesichts des Widerspruchs zweier Veröffentlichungen. Die Halbwertszeit des 129I kann Aufschluss über stellare Bedingungen des s-Prozesses geben.
The advent of improved experimental and theoretical techniques has brought a lot of attention to the electric dipole (E1) response of atomic nuclei in the last decade. The extensive studies have led to the observation and interpretation of a concentration of E1 strength energetically below the Giant Dipole Resonance in many nuclei. This phenomenon is commonly denoted as Pygmy Dipole Resonance (PDR). This contribution will summarize the most important results obtained using different experimental probes, define the challenges to gain a deeper understanding of the excitations, and discuss the newest experimental developments.
The article presents the results of numerical and experimental investigations of guided wave propagation in aluminum plates with variable thickness. The shapes of plate surfaces have been specially designed and manufactured using a CNC milling machine. The shapes of the plates were defined by sinusoidal functions varying in phase shift, which forced the changes in thickness variability alongside the propagation path. The main aim of the study is to analyze the wave propagation characteristics caused by non-uniform thickness. In the first step, the influence of thickness variability on the time course of propagating waves has been analyzed theoretically. The study proves that the wave propagation signals can be determined based on knowledge about the statistical description of the specimen geometry. The histograms of thickness distribution together with the a priori knowledge of the dispersion curves were used to develop an iterative procedure assuming that the signal from the previous step becomes the excitation in the next step. Such an approach allowed for taking into account the complex geometry of the plate and rejecting the assumption about the constant average thickness alongside the propagation path. In consequence, it was possible to predict correctly the signal time course, as well as the time of flight and number of propagating wave modes in specimens with variable thickness. It is demonstrated that theoretical signals predicted in this way coincide well with numerical and experimental results. Moreover, the novel procedure allowed for the correct prediction of the occurrence of higher-order modes.
The article investigates the results obtained from numerical simulations and experimental tests concerning the propagation of guided waves in corroded steel plates. Developing innovative methodologies for assessing corrosion-induced degradation is crucial for accurately diagnosing offshore and ship structures exposed to harsh environmental conditions. The main aim of the research is to analyze how surface irregularities affect wave propagation characteristics. An investigation was conducted for antisymmetric fundamental mode A0. Specifically, the study examines the asymmetrical wavefronts generated by nonuniform thickness in damaged specimens. Initially, numerical analysis explores the impact of thickness variation on wave field symmetry. Corroded plates with varying levels of degradation are modeled using the random fields approach, with degradation levels ranging from 0 % to 60 %. Subsequently, the research investigates how the standard deviation of thickness distribution (from 5 % to 20 % of the initial thickness) and excitation frequency (from 50 to 150 kHz) influence recorded signals and the shape of reconstructed wavefronts. Each scenario compares wavefront symmetry levels estimated using rotational and bilateral symmetry degrees as indicative parameters. The numerical simulations are complemented by experimental tests conducted on plates with three different degradation levels. The results demonstrate the efficacy of the proposed wave field analysis approach for assessing structural integrity, as evidenced by the agreement between numerical predictions and experimental observations.
Ziel der vorliegenden Arbeit ist die Entwicklung, Aufbau und Inbetriebnahme eines Funnelsystems zur Zusammenführung zweier Teilchenstrahlen, bestehend aus zwei Injektionssystemen, zwei RFQ-Beschleunigern, Hochfrequenz-Deflektoren und Diagnoseeinheiten. Die Aufgabe des Experiments ist die praktische Umsetzung eines neuartigen Verfahrens zur Strahlstromerhöhung bei im Idealfall gleichbleibender Emittanz und steigender Brillanz. Notwendig wird dies durch die benötigten hohen Strahlströme im niederenergetischen Bereich einiger zukünftiger geplanter Beschleunigeranlagen. Hier kann der Strahlstrom nicht mehr konventionell von einer einzigen Ionenquelle erzeugt werden. Nur durch die Parallelerzeugung mehrerer Teilchenstrahlen sowie mehrfachem Zusammenführen (Funneling) der Teilchenstrahlen ist es möglich, die notwendigen Strahlströme bei der geforderten kleinen Emittanz zur Verfügung zu stellen. Das Frankfurter Funneling-Experiment ist die skalierte erste HIDIF-Funneling-Stufe als Teil eines Fusionstreibers. Hier werden zwei möglichst identische Helium-Teilchenstrahlen von zwei Ionenquellen erzeugt und in zwei RFQ-Beschleunigern beschleunigt. Der Deflektor biegt die Teilchenstrahlen reißverschlussartig auf eine gemeinsame Strahlachse. Am Anfang der Arbeit stand die Optimierung des Betriebs der Beschleunigerkomponeten und die Entwicklung und der Aufbau eines Einzellendeflektors. Erste erfolgreiche Strahlexperimente zur Strahlvereinigung werden im Kapitel 7.5 vorgestellt. Die Phasenraumellipse des zusammengeführten Strahls zeigt starke bananenförmige Deformierungen, die auf eine schlechte Anpassung des RFQ an den Funnel-Deflektor zurückzuführen sind. Das Elektrodendesign des RFQ ist in zwei unabhängige Bereiche unterteilt. Die erste Zone dient der Beschleunigung der Teilchen. In der zweiten Zone soll erstmals ein sogenannter 3D-Fokus der Strahlradien der x- und y-Ebene und einer longitudinaler Fokussierung erreicht werden. Der zweite Abschnitt bestand für erste Strahltests aus zunächst unmodulierten Elektroden. Zur besseren Anpassung des RFQ an den Funneldeflektor wurde dann das letzte Elektrodenteil erneuert. Der Umbau erfolgte zunächst nur bei einem der beiden RFQ-Beschleuniger. Somit war der direkte Vergleich zwischen altem und neuen Elektrodendesign im Strahlbetrieb möglich. Mit diesem neuen Elektrodenendteil wurde eine Reduktion der Strahlradien der x- sowie y-Ebene, eine bessere longitudinalen Fokussierung sowie eine höhere Transmission erreicht (Kapitel 8). Damit ist es erstmals gelungen mit einer speziellen Auslegung der RFQ-Elektroden eine direkte Anpassung an nachfolgende Elemente zu realisieren. Untersuchungen zur Strahlzusammenführungen werden seit einigen Jahren am Institut durchgeführt. Mit der Entwicklung des 3D-matchers wurde ein weiteres der kritischen Probleme gelöst. Der Umbau des zweiten Beschleunigers findet zur Zeit statt. Nach der Inbetriebnahme werden Funneling-Experimente mit dem Einspalt- und einem neuem Vielspaltdeflektor folgen.
Diese Arbeit entstand im Zusammenhang mit dem Funneling-Experiment am Institut für Angewandte Physik. Dieses Experiment soll die praktische Umsetzung des für das HIDIF-Projekt benötigte Funneln zur Ionenstrom-Erhöhung demonstrieren. Dabei stand die Erzeugung zweier identischer Ionenstrahlen mit einer Energie von 4 keV im Vordergrund. Diese Ionenstrahlen werden in zwei aufeinander zulaufenden RFQ-Beschleunigern auf eine Energie von 160 keV beschleunigt. Der noch in Planung stehende Funneling-Deflektor bringt die beiden Ionenstrahlen auf eine gemeinsame Strahlachse. Zu Beginn der Diplomarbeit stand der Umbau der Emittanzmeßanlage auf eine PC-Plattform. Gleichzeitig wurde ein sogenannter Quellenturm zum Betrieb der Ionenquellen aufgebaut (vgl. Kapitel 7.2). Die Multicusp-Ionenquellen wurden von K. N. Leung vom Lawrence Berkeley National Laboratory (LBNL) entwickelt und gebaut. Das elektrostatische Linsensystem wurde von R. Keller (LBNL) entworfen und berechnet. Die beiden Linsensysteme wurden in unserer Werkstatt gefertigt. Der erste Teil des Testbetriebs der Injektionssysteme, bestehend aus der Multicusp- Ionenquelle sowie dem elektrostatischen Linsensystem auch LEBT (Low Energy Beam Transport) genannt, bestand aus der Messung des Strahlstromes sowie der zugehörigen Emittanz. Zum Messen des Strahlstromes stand eine durch Preßluft in den Ionenstrahl fahrbare Faradaytasse zur Verfügung. Von dieser Faradaytasse wurde eine Kennlinie zur Bestimmung der Spannung der Sekundärelektronen- unterdrückung aufgenommen (vgl. Kapitel 8.1). Zur Messung der Strahlemittanz wurde eine Emittanzmessung nach dem Schlitz-Gitter Prinzip vorgenommen (vgl. Kapitel 5, Kapitel 7.7-7.9). Beim Betreiben der Injektionssysteme stand vor allem der Synchronbetrieb im Vordergrund. Dabei wurde festgestellt, daß eine der beiden Ionenquellen auch ohne Linsensystem einen größeren Strahlstrom liefert (vgl. Kapitel 8.9). Der Unterschied zwischen den Ionenquellen beträgt bei einem Bogenstrom von 6 A über 20 %. Dies bedeutet für den späteren Strahlbetrieb am RFQ, daß zum Erzeugen gleicher Strahlströme eine Ionenquelle immer mit einem kleineren Bogenstrom betrieben werden muß. Die dadurch unterschiedlichen Plasmadichten sowie thermischen Belastungen der Plasmakammer und unterschiedlichen Füllgrade der elektrostatischen Linsen tragen zu den festgestellten Emittanzunterschieden bei. Zum späteren Vergleich der Injektionssysteme wurde ein Injektionssystem durch verschiedene Bogenströme, variierte Spannungen an den elektrostatischen Linsen sowie unterschiedlichen Gasdrücken in der Plasmakammer ausgemessen. Diese Messungen wurden nach Wechseln der Glühkathode sowie Demontage und Neumontage von Ionenquelle und Linsensystem wiederholt. Dabei wurde festgestellt, daß sich der Strahlstrom bei der Vergleichsmessung kaum, die Emittanz der Injektionssysteme aber bis ca. 10% ändert (vgl. Kapitel 8.5). Diese Unterschiede müssen bei dem späteren Vergleich mit dem zweiten Injektionssystem einbezogen werden.Beim Betrieb des zweiten Injektionssystems wurden im direkten Vergleich der Injektionssysteme Unterschiede zwischen dem Strahlstrom sowie der Emittanz festgestellt. Auch hier lieferte das zweite Injektionssystem den schon nach der Ionenquelle festgestellten größeren Ionenstrom. Die gemessenen normierten 90 % RMS-Emittanzen bei einem Strahlstrom von 1 mA betragen am Injektionssystem 1 , beim Injektionssystem 2 , bei einer e1 =0,0288 mm mrad e2 =0,0216 mm mrad Strahlenergie von 4 keV. Die Emittanzunterschiede betragen bis zu 30 %. Im Betrieb mit dem RFQ können die Linsensysteme nicht mit den identischen Spannungen betrieben werden. Dies ist zum einen auf die fertigungsbedingten Unterschiede zurückzuführen, zum anderen auf die abweichenden Plasmadichten zum Erreichen gleicher Strahlströme. Im geplanten HIDIF-Projekt sollen 48 Ionenquellen drei unterschiedliche Teilchenströme erzeugen. Bei dieser Anzahl an Ionenquellen für drei unterschiedliche Ionensorten wird das Erzeugen identischer Teilchenströme sicher noch schwerer zu bewältigen sein. Am Funneling-Experiment ist der Vergleich der beiden Injektionssysteme abgeschlossen. Der Doppelstrahl RFQ-Beschleuniger ist aufgebaut, es wurde bereits ein Ionenstrahl in den RFQ eingeschossen (vgl. Kapitel 8.13). Die normierten 90 % RMS-Emittanzen nach dem RFQ betragen 0,057 mm mrad sowie 0,0625 mm mrad für die beiden Strahlachsen. Der Emittanzunterschied ist kleiner 9 %. Die Emittanzen nach dem RFQ können nicht direkt mit den im Testbetrieb gemessenen Emittanzen der Injektionssysteme verglichen werden. Im Strahlbetrieb mit dem RFQ wurde eine Strahlenergie der Injektionssysteme von 4,15 keV benötigt. Außerdem mußten durch geänderte Einschußbedingungen in den RFQ die Linsenspannungen gegenüber dem Testbetrieb variiert werden. Mit dem Aufbau des Funneling-Deflektors wird zur Zeit begonnen. Nach der Erprobung wird der Einbau in die Strahlachse erfolgen.
Zyklotronresonanzen von Ionen im hochfrequenz-modulierten magnetisch fokussierten Elektronenstrahl
(2000)
Ein Prototyp einer Kombination aus Penningfalle und EBIS/T wurde im Rahmen dieser Arbeit entwickelt. Dazu wurde ein Standard NMRMagnet erfolgreich so umgebaut, daß er in Bezug auf Vakuum, Temperatur und Temperaturbeständigkeit den Erfordernissen einer EBIS/T als Ionenfalle entspricht. Diese Apparatur ermöglicht nun die Untersuchung der in der EBIS/T erzeugten Ionen mit den Methoden der 'Fallenphysik'. Die Anregung der Ionen in der Falle wurde hier erstmals durch Hochfrequenzmodulation des Elektronenstroms über die Wehneltelektrode der Elektronenkanone durchgeführt. Messungen haben gezeigt, daß man in der EBIS/T erzeugte Ionen selektiv nach ihrem Verhältnis von Masse zu Ladung mit der Modulation in Resonanz bringen kann, bis sie den Elektronenstrahl verlassen. Die Ionen besitzen auch im dichten Elektronenstrahl eine charakteristische Eigenfrequenz, die zwar von der Raumladung in der Falle abhängt, mit der jedoch trotzdem eine Resonanzanregung durchgeführt werden kann. Im Experiment bestätigte sich die Vorhersage für die Mindestdauer der Anregung in der Größenordnung von Mikrosekunden und für Relaxionszeiten der kohärenten Ionenbewegungen im Bereich von Millisekunden, was eine grundsätzliche Voraussetzung für eine resonante Separation verschiedener Ionensorten darstellt. Die auftretenden Eigenfrequenzen der unterschiedlichen Ionen lassen sich theoretisch und im Einklang mit numerischen Simulationen beschreiben. Die Anregung der Eigenfrequenzen von Ionen über den Elektronenstrahl funktioniert bis zu so hohen Ionendichten, wie sie in einer EBIS vorkommen. Ionenmanipulationen, wie man sie von den Penningfallen her kennt, lassen sich auf ein Ionenensemble mit bis zu 10 10 Ionen pro cm 3 übertragen. Die gemessenen Verschiebungen der Eigenfrequenzen gegenüber der Zyklotronfrequenz geben darüber hinaus Aufschluß über den Kompensationsgrad des Elektronenstrahls in der EBIS/T und können damit als wichtiges Diagnosehilfsmittel für die Optimierung von ElektronenstrahlIonenquellen verwendet werden. Läßt man die Resonanzanregung kontinuierlich einwirken, so tritt überraschenderweise eine Erhöhung des Anteils an hochgeladenen Ionen in der EBIS/T auf. Darüberhinaus konnte experimentell gezeigt werden, daß die hochgeladenen Ionen auf der Achse des Elektronenstrahls konzentriert werden, während niedrig geladene Ionenen dort verschwinden und bevorzugt den äußeren Strahlbereich bevölkern. Die Erklärung dafür ist, daß durch kontinuierliches Entfernen dieser niedrig geladenen Ionen aus dem Elektronenstrahl eine vollständige Kompensation der Raumladung des Elektronenstrahls verhindert wird. Dadurch lassen sich Ionen in der Ionenquelle über einen längeren Zeitraum züchten. Vorteilhafterweise drängt die Anregung über eine Modulation des Elektronenstrahls im Gegensatz zu der normalen Dipolanregung bevorzugt niedrig geladenen Ionen, mit größerer Aufenthaltswahrscheinlichkeit am Rand, aus dem Elektronenstrahl. Dies führt zu einer verstärkten CoulombKühlung der hochgeladenen Ionen und konzentriert diese in der Mitte des Strahls, wo die Anregung fast unwirksam ist. Diese Kühlkraft wirkt als Zusammenspiel der attraktiven radialen Kraft des nicht vollständig raumladungskompensierten Elektronenstrahls und der Coulombstöße der Ionen untereinander. Durch diese Methode der Kühlung der Ionen untereinander können verstärkt Ionen hoher Ladungszustände in der Ionenquelle konzentriert werden. Der Vorgang der Kühlung durch Coulombstöße konnte mit einem Modell beschrieben werden, bei dem die thermische Verteilung aller Ionen im Elektronenstrahl einer Boltzmann Verteilung folgt. Das Modell benutzt vier Kräfte: die magnetische Kraft, die elektrische Haltekraft des Elektronenstrahls, die periodische elektrische Anregungskraft und die Reibung der Ionen proportional zu ihrer Geschwindigkeit und ihres Ladungszustandes bzw. die Stöße der Ionen untereinander. Die Resonanzanregung im Raumladungspotential sowie die Aufenthaltsverteilung der Ionen im Elektronenstrahl konnten damit dargestellt werden. Für Präzisionsexperimente an hochgeladenen Ionen bietet sich die Kombination aus einer EBIS/T mit integrierter Penningfalle an. Die Experimente haben gezeigt, daß es möglich ist, Ionenspektren mit einem eingekoppelten Wechselfeld in dem Ionisationsraum der EBIS/T zu separieren und zu reinigen. Für die Zukunft wünscht man sich aber eine größere Effektivität für das vollständige Entfernen bestimmter Ionensorten. Dies kann man erreichen, indem man den Elektronenstrahl noch dichter mit der Ionisationsröhre umschließt. Durch die kontinuierliche Resonanzanregung profitiert man von einer längeren Einschlußzeit für die stufenweise Ionisierung zu höheren Ladungszuständen und/oder eröffnet ElektronenstrahlIonenquellen neue Einsatzmöglichkeiten unter schlechteren Vakuumbedingungen. Die verstärkte Kühlung und Zentrierung der Ionen auf der Achse während dieses Betriebsmodus verbessert die Emmitanz von ElektronenstrahlIonenquellen. Für die Zukunft kann man sich eine EBIS mit moduliertem Elektronenstrahl auch im Strahlweg niederenergetischer hochgeladener Ionen zum Verbessern deren Emittanz vorstellen. Die im Elektronenstrahl erzeugten und sich selbst kühlenden Ionen wirken durch Coulombstöße als Kühlmedium ohne die Gefahr der Umladung wie bei gasgefüllten hfQuadrupolen.
Gegenstand dieser Arbeit sind Eigenschaften angeregter hadronischer Materie sowie physikalische Systeme, in denen diese Materie auftritt bzw. produziert wird. Die Beschreibung der stark wechselwirkenden Materie erfolgt in einem hadronischen, chiral-symmetrischen SU(3)L x SU(3)R Modell, welches die Saturierungseigenschaften von Kernmaterie und die Eigenschaften von Atomkernen reproduziert. Die Untersuchung heißer und dichter unendlicher hadronischor Materie zeigt, dass das vom Modell vorhergesagte Phasendiagramm stark von den Kopplungen der Baryonenresonanzen abhängt. Für kalte hadronische Materie ergibt die Einbeziehung des Baryonendekupletts und die Freiheit in deren Vektorkopplungen eine sehr große Bandbreite an verschiedenen Zustandsgleichungen. Für heiße hadronische Materie mit verschwindendem baryochemischen Potential zeigt sich ebenfalls eine starke Abhängigkeit der Eigenschaften hadronischer Materie von der Ankopplung der baryonischen Resonanzen. Es werden drei verschiedene Parametrisierungen betrachtet. Das resultierende Phasenübergangsverhalten variiert von einem "Crossover" über einen schwachen, zu einem doppelten Phasenübergang erster Ordnung. Es zeigt sich jedoch, dass die beobachteten Eigenschaften von Neutronensternen die Unbestimmtheit bzgl. der Vektorkopplung dieser Freiheitsgrade und damit der Zustandsgleichung deutlich verringern. Das Raum-Zeit Verhalten relativistischer Schwerionenkollisionen bei SPS- und RHIC-Energien wird mittels einer hydrodynamischen Simulation unter Benutzung der chiralen Zustandsgleichungen untersucht. Dabei spiegelt sich das unterschiedliche Phasenübergangsverhalten deutlich im Ausfrierverhalten der hadronischen Materie wider. Die im chiralen Modell berechneten Teilchenzahlverhältnisse werden mit den aus Schwerionenkollisionen von AGS- bis RHIC-Energien erhaltenen experimentellen Daten verglichen. Dabei zeigt sich, dass die verschiedenen Parametersätze des chiralen Modells und die Rechnungen für ein nichtwechselwirkendes, ideales Hadronengas eine ähnlich gute Beschreibung der gemessenen Weite liefern. Die deduzierten Ausfrierwerte für die Temperatur sind sensitiv auf das Phasenübergangsverhalten und liegen unterhalb der jeweiligen kritischen Temperatur. Die vorhergesagten Ausfriermassen sind in allen Parametrisierungen sehr ähnlich mit Abweichungen bis zu 15% von den entsprechenden Vakuumwerten. Die Untersuchung der Eigenschaften von Vektormesonen in dichter Materie erfolgt in der Mittleren-Feld- und in der HartreeNäherung. Hierbei zeigt sich eine signifikante Reduzierung der Teilchenmassen durch Vakuumpolarisationseffekte.
Compelling evidence for the creation of a new form of matter has been claimed to be found in Pb+Pb collisions at SPS. We discuss the uniqueness of often proposed experimental signatures for quark matter formation in relativistic heavy ion collisions. It is demonstrated that so far none of the proposed signals like J/psi meson production/suppression, strangeness enhancement, dileptons, and directed flow unambigiously show that a phase of deconfined matter has been formed in SPS Pb+Pb collisions. We emphasize the need for systematic future measurements to search for simultaneous irregularities in the excitation functions of several observables in order to come close to pinning the properties of hot, dense QCD matter from data.
Compelling evidence for a new form of matter has been claimed to be formed in Pb+Pb collisions at SPS. We critically review two suggested signatures for this new state of matter: First the suppression of the J/psi , which should be strongly suppressed in the QGP by two different mechanisms, the color-screening [1] and the QCD-photoe ect [2]. Secondly the measured particle, in particular strange hadronic, ratios might signal the freeze-out from a quark-gluon phase.
A significant drop of the vector meson masses in nuclear matter is observed in a chiral SU(3) model due to the e ects of the baryon Dirac sea. This is taken into account through the summation of baryonic tadpole diagrams in the relativistic Hartree approximation. The appreciable decrease of the in-medium vector meson masses is due to the vacuum polarisation e ects from the nucleon sector and is not observed in the mean field approximation.
Introduction: Until now it is not possible to determine the equation of state (EOS) of hadronic matter from QCD. One succesfully applied alternative way to describe the hadronic world at high densities and temperatures are effective models like the RMF-models [1], where the relevant degrees of freedom are baryons and mesons instead of quarks and gluons. Since approximate chiral symmetry is an essential feature of QCD, it should be a useful concept for building and restricting e ective models. It has been shown [2,3] that effective sigma-omega models including SU(2) chiral symmetry are able to obtain a reasonable description of nuclear matter and finite nuclei. Recently [4] we have shown that an extended SU(3) × SU(3) chiral sigma-omega model is able to describe nuclear matter ground state properties, vacuum properties and finite nuclei satisfactorily. This model includes the lowest SU(3) multiplets of the baryons (octet and decuplet[5]), the spin-0 and the spin-1 mesons as the relevant degrees of freedom. Here we will discuss the predictions of this model for dense, hot, and strange hadronic matter.
A nonlinear chiral SU(3) approach including the spin 3 2 decuplet is developed to describe dense matter. The coupling constants of the baryon resonances to the scalar mesons are determined from the decuplet vacuum masses and SU(3) symmetry relations. Di erent methods of mass generation show significant differences in the properties of the spin- 3 2 particles and in the nuclear equation of state