550 Geowissenschaften
Refine
Year of publication
- 2020 (68) (remove)
Document Type
- Article (58)
- Doctoral Thesis (4)
- Contribution to a Periodical (2)
- Part of a Book (1)
- Conference Proceeding (1)
- Master's Thesis (1)
- Preprint (1)
Has Fulltext
- yes (68)
Is part of the Bibliography
- no (68)
Keywords
- climate change (3)
- Palaeoceanography (2)
- Palaeoclimate (2)
- Physical oceanography (2)
- minerals (2)
- ATR-FTIR (1)
- Abundance (1)
- Alloy (1)
- Andesites (1)
- Archaeogeophysics (1)
Institute
Surface temperature is a fundamental parameter of Earth’s climate. Its evolution through time is commonly reconstructed using the oxygen isotope and the clumped isotope compositions of carbonate archives. However, reaction kinetics involved in the precipitation of carbonates can introduce inaccuracies in the derived temperatures. Here, we show that dual clumped isotope analyses, i.e., simultaneous ∆47 and ∆48 measurements on the single carbonate phase, can identify the origin and quantify the extent of these kinetic biases. Our results verify theoretical predictions and evidence that the isotopic disequilibrium commonly observed in speleothems and scleractinian coral skeletons is inherited from the dissolved inorganic carbon pool of their parent solutions. Further, we show that dual clumped isotope thermometry can achieve reliable palaeotemperature reconstructions, devoid of kinetic bias. Analysis of a belemnite rostrum implies that it precipitated near isotopic equilibrium and confirms the warmer-than-present temperatures during the Early Cretaceous at southern high latitudes.
A comprehensive study of sillenite Bi12SiO20 single-crystal properties, including elastic stiffness and piezoelectric coefficients, dielectric permittivity, thermal expansion and molar heat capacity, is presented. Brillouin-interferometry measurements (up to 27 GPa), which were performed at high pressures for the first time, and ab initio calculations based on density functional theory (up to 50 GPa) show the stability of the sillenite structure in the investigated pressure range, in agreement with previous studies. Elastic stiffness coefficients c11 and c12 are found to increase continuously with pressure while c44 increases slightly for lower pressures and remains nearly constant above 15 GPa. Heat-capacity measurements were performed with a quasi-adiabatic calorimeter employing the relaxation method between 2 K and 395 K. No phase transition could be observed in this temperature interval. Standard molar entropy, enthalpy change and Debye temperature are extracted from the data. The results are found to be roughly half of the previous values reported in the literature. The discrepancy is attributed to the overestimation of the Debye temperature which was extracted from high-temperature data. Additionally, Debye temperatures obtained from mean sound velocities derived by Voigt-Reuss averaging are in agreement with our heat-capacity results. Finally, a complete set of electromechanical coefficients was deduced from the application of resonant ultrasound spectroscopy between 103 K and 733 K. No discontinuities in the temperature dependence of the coefficients are observed. High-temperature (up to 1100 K) resonant ultrasound spectra recorded for Bi12MO20 crystals revealed strong and reversible acoustic dissipation effects at 870 K, 960 K and 550 K for M = Si, Ge and Ti, respectively. Resonances with small contributions from the elastic shear stiffness c44 and the piezoelectric stress coefficient e123 are almost unaffected by this dissipation.
The metasomatised continental mantle may play a key role in the generation of some ore deposits, in particular mineral systems enriched in platinum-group elements (PGE) and Au. The cratonic lithosphere is the longest-lived potential source for these elements, but the processes that facilitate their pre-concentration in the mantle and their later remobilisation to the crust are not yet well-established. Here, we report new results on the petrography, major-element, and siderophile- and chalcophile-element composition of native Ni, base metal sulphides (BMS), and spinels in a suite of well-characterised, highly metasomatised and weakly serpentinised peridotite xenoliths from the Bultfontein kimberlite in the Kaapvaal Craton, and integrate these data with published analyses. Pentlandite in polymict breccias (failed kimberlite intrusions at mantle depth) has lower trace-element contents (e.g., median total PGE 0.72 ppm) than pentlandite in phlogopite peridotites and Mica-Amphibole-Rutile-Ilmenite-Diopside (MARID) rocks (median 1.6 ppm). Spinel is an insignificant host for all elements except Zn, and BMS and native Ni account for typically <25% of the bulk-rock PGE and Au. High bulk-rock Te/S suggest a role for PGE-bearing tellurides, which, along with other compounds of metasomatic origin, may host the missing As, Ag, Cd, Sb, Te and, in part, Bi that are unaccounted for by the main assemblage.
The close spatial relationship between BMS and metasomatic minerals (e.g., phlogopite, ilmenite) indicates that the lithospheric mantle beneath Bultfontein was resulphidised by metasomatism after initial melt depletion during stabilisation of the cratonic lithosphere. Newly-formed BMS are markedly PGE-poor, as total PGE contents are <4.2 ppm in pentlandite from seven samples, compared to >26 ppm in BMS in other peridotite xenoliths from the Kaapvaal craton. This represents a strong dilution of the original PGE abundances at the mineral scale, perhaps starting from precursor PGE alloy and small volumes of residual BMS. The latter may have been the precursor to native Ni, which occurs in an unusual Ni-enriched zone in a harzburgite and displays strongly variable, but overall high PGE abundances (up to 81 ppm). In strongly metasomatised peridotites, Au is enriched relative to Pd, and was probably added along with S. A combination of net introduction of S, Au +/− PGE from the asthenosphere and intra-lithospheric redistribution, in part sourced from subducted materials, during metasomatic events may have led to sulphide precipitation at ~80–120 km beneath Bultfontein. This process locally enhanced the metallogenic fertility of this lithospheric reservoir. Further mobilisation of the metal budget stored in these S-rich domains and upwards transport into the crust may require interaction with sulphide-undersaturated melts that can dissolve sulphides along with the metals they store.
The Izu–Bonin–Mariana volcanic arc is situated at a convergent plate margin where subduction initiation triggered the formation of MORB-like forearc basalts as a result of decompression melting and near-trench spreading. International Ocean Discovery Program (IODP) Expedition 352 recovered samples within the forearc basalt stratigraphy that contained unusual macroscopic globular textures hosted in andesitic glass (Unit 6, Hole 1440B). It is unclear how these andesites, which are unique in a stratigraphic sequence dominated by forearc basalts, and the globular textures therein may have formed. Here, we present detailed textural evidence, major and trace element analysis, as well as B and Sr isotope compositions, to investigate the genesis of these globular andesites. Samples consist of K2O-rich basaltic globules set in a glassy groundmass of andesitic composition. Between these two textural domains a likely hydrated interface of devitrified glass occurs, which, based on textural evidence, seems to be genetically linked to the formation of the globules. The andesitic groundmass is Cl rich (ca. 3000 µg/g ), whereas globules and the interface are Cl poor (ca. 300 µg/g ). Concentrations of fluid-mobile trace elements also appear to be fractionated in that globules and show enrichments in B, K, Rb, Cs, and Tl, but not in Ba and W relative to the andesitic groundmass, whereas the interface shows depletions in the latter, but is enriched in the former. Interestingly, globules and andesitic groundmass have identical Sr isotopic composition within analytical uncertainty ( 87Sr∕86Sr of 0.70580 ± 10 ), indicating that they likely formed from the same source. However, globules show high δ11 B (ca. + 7 ‰ ), whereas their host andesites are isotopically lighter (ca. – 1 ‰ ), potentially indicating that whatever process led to their formation either introduced heavier B isotopes to the globules, or induced stable isotope fractionation of B between globules and their groundmass. Based on the bulk of the textural information and geochemical data obtained from these samples, we conclude that these andesites likely formed as a result of the assimilation of shallowly altered oceanic crust (AOC) during forearc basaltic magmatism. Assimilation likely introduced radiogenic Sr, as well as heavier B isotopes to comparatively unradiogenic and low δ11B forearc basalt parental magmas (average 87Sr∕86Sr of 0.703284). Moreover, the globular textures are consistent with their formation being the result of fluid-melt immiscibility that was potentially induced by the rapid release of water from assimilated AOC whose escape likely formed the interface. If the globular textures present in these samples are indeed the result of fluid-melt immiscibility, then this process led to significant trace element and stable isotope fractionation. The textures and chemical compositions of the globules highlight the need for future experimental studies aimed at investigating the exsolution process with respect to potential trace element and isotopic fractionation in arc magmas that have perhaps not been previously considered.
WaterGAP (Water - Global Assessment and Prognosis) is a tool for modeling global water use and water availability. It participates among other models in the ISIMIP initiative (The Inter-Sectoral Impact Model Intercomparison Project). As part of this initiative, the water temperature should be calculated by participating hydrological models because it plays a vital role in many chemical, physical and biological processes. Therefore, the subject of this master thesis is to implement the physically based surface water temperature computation after VAN BEEK ET AL. (2012) and WANDERS ET AL. (2019) into WaterGAP and compare the results to the statistical regression approach by PUNZET ET AL. (2012). The computation is validated with observed water temperature data obtained from the GEMStat water quality database. The results are good for arctic and temperate latitudes. Surface water temperatures for tropical rivers are overestimated, most likely due to the overestimation of precipitation temperatures, incoming radiation and groundwater temperatures. The comparison with the regression model by PUNZET ET AL. (2012) shows matching results. The regression model even matches with WaterGAP results for most of the simulations of the future under climate change conditions, where the regression model should stop working due to changing environmental parameters. Several assumptions had to be made in order to implement the water temperature calculation in Water-GAP. These include, e.g., discharge temperatures for power plant cooling water, precipitation and surface runoff temperatures. For model improvements, perhaps three different values for the different regions of the world should be used to cool down the precipitation and surface runoff. The model could also be improved by refining the ice formation calculation, especially for the conditions when the ice melts, breaks up and is transported downstream. Furthermore, the feedback to the river channel roughness could be implemented if ice has formed. The WaterGAP model upgraded with the water temperature calculation will help the ISIMIP initiative in the future.
Central Europe was affected by a compressional tectonic event in the Late Cretaceous, caused by the convergence of Iberia and Europe. Basement uplifts, inverted graben structures and newly formed marginal troughs are the main expressions of crustal shortening. Although the maximum activity occurred in a short period between 90 and 75 Ma, the exact timing of this event is still unclear. Dating of start and end of basin inversion is very different depending on the applied method. On the basis of borehole data, facies and thickness maps, the timing of basin re-organisation was reconstructed for several basins in Central Europe. The obtained data point to a synchronous start of basin inversion already at 95 Ma (Cenomanian), 5 Million years earlier than commonly assumed. The end of the Late Cretaceous compressional event is more difficult to pinpoint, because regional uplift and salt migration disturb the signal of shifting marginal troughs. Unconformities of Late Campanian to Paleogene age on inverted structures indicate slowly declining uplift rates.
In partially molten regions inside the earth melt buoyancy may trigger upwelling of both solid and fluid phases, i.e. diapirism. If the melt is allowed to move separately with respect to the matrix, melt perturbations may evolve into solitary porosity waves. While diapirs may form on a wide range of scales, porosity waves are restricted to sizes of a few times the compaction length. Thus, the size of a partially molten perturbation controls whether a diapir or a porosity wave will emerge. We study the transition from diapiric rise to solitary porosity waves by solving the two-phase flow equations of conservation of mass and momentum in 2D with porosity dependent matrix viscosity. We systematically vary the initial size of a porosity perturbation from 1 to 100 times the compaction length. If the perturbation is much larger than a regular solitary wave, its Stokes velocity is large and therefore faster than the segregating melt. Consequently, the fluid is not able to form a porosity wave and a diapir emerges. For small perturbations solitary waves emerge, either with a positive or negative vertical matrix velocity inside. In between the diapir and solitary wave regimes we observe a third regime of solitary wave induced focusing of melt. In these cases, diapirism is dominant but the fluid is still fast enough to locally build up small solitary waves which rise slightly faster than the diapir and form finger like structures at the front of the diapir. In our numerical simulations the width of these fingers is controlled by the compaction length or the grid size, whichever is larger. In cases where the compaction length becomes similar to or smaller than the grid size the finger-like leading solitary porosity waves are no more properly resolved, and too big and too fast waves may be the result. Therefore, one should be careful in large scale two-phase flow modelling with melt focusing especially when compaction length and grid size are of similar order.
High-pressure single-crystal to 20 GPa and powder diffraction measurements to 50 GPa, show that the structure of Pb2SnO4 strongly distorts on compression with an elongation of one axis. A structural phase transition occurs between 10 GPa and 12 GPa, with a change of space group from Pbam to Pnam. The resistivity decreases by more than six orders of magnitude when pressure is increased from ambient conditions to 50 GPa. This insulator-to-semiconductor transition is accompanied by a reversible appearance change from transparent to opaque. Density functional theory-based calculations show that at ambient conditions the channels in the structure host the stereochemically-active Pb 6s2 lone electron pairs. On compression the lone electron pairs form bonds between Pb2+ ions. Also provided is an assignment of irreducible representations to the experimentally observed Raman bands.
This article presents the findings from systematically reviewing 26 empirical research studies published from 2005 to 2014 on the use of GIS for learning and teaching. By employing methods of narrative synthesis and qualitative content analysis, the study gives evidence about the state of knowledge of competence-based GIS education. The results explain what factors and variables effect GIS learning in terms of technology use, major subject contents, learning contexts, and didactic and pedagogical aspects. They also show what facets of knowledge, process skills, and affect the research literature has investigated. The analysis of the type and quality of the methods used indicates that current GIS education research is a heterogeneous field that needs a systematic research framework for future efforts, according to empirical education research.
Aquatic ecosystems are globally contaminated with microplastics (MP). However, comparative data on MP levels in freshwater systems is still scarce. Therefore, the aim of this study is to quantify MP abundance in water and sediment of the German river Elbe using visual, spectroscopic (Fourier-transform infrared spectroscopy) and thermo analytical (pyrolysis gas chromatography mass spectrometry) methods. Samples from eleven German sites along the German part of the Elbe were collected, both in the water and sediment phase, in order to better understand MP sinks and transport mechanisms. MP concentrations differed between the water and sediment phase. Sediment concentrations (mean: 3,350,000 particles m−3, 125–5000 μm MP) were in average 600,000-fold higher than water concentrations (mean: 5.57 particles m−3, 150–5000 μm MP). The abundance varied between the sampling sites: In sediments, the abundance decreased in the course of the river while in water samples no such clear trend was observed. This may be explained by a barrage retaining sediments and limiting tidal influence in the upstream parts of the river. Particle shape differed site-specifically with one site having exceptionally high quantities of spheres, most probably due to industrial emissions of PS-DVB resin beads. Suspended MP consisted predominantly of polyethylene and polypropylene whereas sediments contained a higher diversity of polymer types. Determined MP concentrations correspond well to previous results from other European rivers. In a global context, MP levels in the Elbe relate to the lower (water) to middle section (sediment) of the global range of MP concentrations determined for rivers worldwide. This highlights that elevated MP levels are not only found in single countries or continents, but that MP pollution is an issue of global concern.