550 Geowissenschaften
Refine
Year of publication
Document Type
- Article (896) (remove)
Has Fulltext
- yes (896)
Keywords
- Climate change (7)
- climate change (7)
- COSMO-CLM (6)
- Palaeoclimate (6)
- Atmospheric chemistry (5)
- Biogeochemistry (5)
- Palaeoceanography (5)
- precipitation (5)
- loess (4)
- Clausius–Clapeyron scaling (3)
Institute
- Geowissenschaften (546)
- Geowissenschaften / Geographie (100)
- Biodiversität und Klima Forschungszentrum (BiK-F) (59)
- Senckenbergische Naturforschende Gesellschaft (51)
- Extern (22)
- Biowissenschaften (21)
- Geographie (15)
- Präsidium (12)
- Institut für Ökologie, Evolution und Diversität (9)
- Physik (6)
Highlights
• We present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series.
• The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios.
• The model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33.
Abstract
High-rate Global Navigation Satellite System (HR-GNSS) data can be highly useful for earthquake analysis as it provides continuous high-frequency measurements of ground motion. This data can be used to analyze diverse parameters related to the seismic source and to assess the potential of an earthquake to prompt strong motions at certain distances and even generate tsunamis. In this work, we present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series. The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios. We explored the potential of the model for global application and compared its performance using both synthetic and real data from different seismogenic regions. The performance of our model at this stage was satisfactory in estimating earthquake magnitude from synthetic data with 0.07 ≤ RMS ≤ 0.11. Comparable results were observed in tests using synthetic data from a different region than the training data, with RMS ≤ 0.15. Furthermore, the model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33, provided that the data from a particular group of stations had similar epicentral distance constraints to those used during the model training. The robustness of the DL model can be improved to work independently from the window size of the time series and the number of stations, enabling faster estimation by the model using only near-field data. Overall, this study provides insights for the development of future DL approaches for earthquake magnitude estimation with HR-GNSS data, emphasizing the importance of proper handling and careful data selection for further model improvements.
PolarCAP – A deep learning approach for first motion polarity classification of earthquake waveforms
(2022)
Highlights
• We present PolarCAP, a deep learning model that can classify the polarity of a waveform with a 98% accuracy.
• The first-motion polarity of seismograms is a useful parameter, but its manual determination can be laborious and imprecise.
• We demonstrate that in several cases the model can assign trace polar-ity more accurately than a human analyst.
Abstract
The polarity of first P-wave arrivals plays a significant role in the effective determination of focal mechanisms specially for smaller earthquakes. Manual estimation of polarities is not only time-consuming but also prone to human errors. This warrants a need for an automated algorithm for first motion polarity determination. We present a deep learning model - PolarCAP that uses an autoencoder architecture to identify first-motion polarities of earth-quake waveforms. PolarCAP is trained in a supervised fashion using more than 130,000 labelled traces from the Italian seismic dataset (INSTANCE) and is cross-validated on 22,000 traces to choose the most optimal set of hyperparameters. We obtain an accuracy of 0.98 on a completely unseen test dataset of almost 33,000 traces. Furthermore, we check the model generalizability by testing it on the datasets provided by previous works and show that our model achieves a higher recall on both positive and negative polarities.
Highlights
• Germany plans more long-distances water transfers to secure drinking water supply.
• Long-distance water transfers can unfold lock-ins that limit adaptive water governance.
• Our interdisciplinary case study shows how lock-ins emerge over different spaces and times.
• Commercialisation of water but also local protests contributed to various lock-ins.
• We therefore call for context-specific assessments of potentials and risks of LDWT.
Abstract
Germany plans to expand water transfers over long distances in the light of numerous and pressing challenges for drinking water supply. Research on inter- and intrabasin water transfers warns, however, that major investments in large-scale infrastructure systems accompanied by institutional logics and political interests often lead to a so-called lock-in. As a consequence, long-distance water transfers can limit the potential for adaptive water governance in the involved supply areas over decades with negative impacts for people and the environment. By using a case study in Germany as an example, we researched when, where and how such lock-ins around long-distance water transfers emerge. In the infrastructural development of the Elbaue-Ostharz transfer system we found various lock-ins that overlap in space and time. Some are located at the centre others at the margins of the infrastructure and commercialization of the water sector as well as hydraulic and hygienic concerns interlock with local protests in a way that the expansion of the long-distance water transfer infrastructure is presented continuously as imperative. Our findings contribute to a relational understanding of lock-ins of long-distance water transfers as contingent and diverse processes. Given the widespread occurrence of lock-ins, we argue for a context-specific assessment of potentials and risks of long-distance water transfers in times of multiple crises.
Highlights
• New fumarole and thermal water data for Askja and Kverkfjöll volcanoes, Iceland.
• Data compared to modelled compositions and fluxes of magmatic gas.
• Fumarole compositions compatible with origin of CO2 and S from degassing intrusions.
• Intrusive magmatic fluxes sufficient to sustain hydrothermal fluxes of CO2 and S in Iceland
• Magma degassing insignificant/minor source of H2O and Cl to Icelandic hydrothermal fluids
Abstract
Mantle volatiles are transported to Earth's crust and surface by basaltic volcanism. During subaerial eruptions, vast amounts of carbon, sulfur and halogens can be released to the atmosphere during a short time-interval, with impacts ranging in scale from the local environment to the global climate. By contrast, passive volatile release at the surface originating from magmatic intrusions is characterized by much lower flux, yet may outsize eruptive volatile quantities over long timescales. Volcanic hydrothermal systems (VHSs) act as conduits for such volatile release from degassing intrusions and can be used to gauge the contribution of intrusive magmatism to global volatile cycles. Here, we present new compositional and isotopic (δD and δ18O-H2O, 3He/4He, δ13C-CO2, Δ33S-δ34S-H2S and SO4) data for thermal waters and fumarole gases from the Askja and Kverkfjöll volcanoes in central Iceland. We use the data together with magma degassing modelling and mass balance calculations to constrain the sources of volatiles in VHSs and to assess the role of intrusive magmatism to the volcanic volatile emission budgets in Iceland.
The CO2/ΣS (10−30), 3He/4He (8.3–10.5 RA; 3He/4He relative to air), δ13C-CO2 (−4.1 to −0.2 ‰) and Δ33S-δ34S-H2S (−0.031 to 0.003 ‰ and −1.5 to +3.6‰) values in high-gas flux fumaroles (CO2 > 10 mmol/mol) are consistent with an intrusive magmatic origin for CO2 and S at Askja and Kverkfjöll. We demonstrate that deep (0.5–5 kbar, equivalent to ∼2–18 km crustal depth) decompression degassing of basaltic intrusions in Iceland results in CO2 and S fluxes of 330–5060 and 6–210 kt/yr, respectively, which is sufficient to account for the estimated CO2 flux of Icelandic VHSs (3365–6730 kt/yr), but not the VHS S flux (220–440 kt/yr). Secondary, crystallization-driven degassing from maturing intrusions and leaching of crustal rocks are suggested as additional sources of S. Only a minor proportion of the mantle flux of Cl is channeled via VHSs whereas the H2O flux remains poorly constrained, because magmatic signals in Icelandic VHSs are masked by a dominant shallow groundwater component of meteoric water origin. These results suggest that the bulk of the mantle CO2 and S flux to the atmosphere in Iceland is supplied by intrusive, not eruptive magmatism, and is largely vented via hydrothermal fields.
Highlights
• Subcrustal earthquakes detected beneath Fogo volcano, Cape Verde.
• At the focal depth of 40 km temperatures are likely too high for brittle failure.
• The earthquakes may originate from magma injection into a deep subcrustal reservoir.
• This observation indicates a distinct magma supply system of Fogo volcano.
Abstract
Fogo volcano belongs to the Cape Verde hotspot and its most recent eruption occurred from November 2014 to February 2015. From January to December 2016 we operated a temporary seismic network and array on Fogo and were able to locate 289 earthquakes in total. Array analysis shows that most of the events occur within the crust at distances >25 km near the neighboring island of Brava. However, on 15th August 2016 the network recorded an isolated cluster of >20 earthquakes, 13 of which could be located beneath the southern part of Fogo. The differences between S- and P-wave arrival times at steep incidence clearly indicate focal depths between approximately 38 and 44 km whereas receiver-function analyses place the Moho discontinuity at depths between 11 and 14 km. Thus, the earthquakes are located well within the upper mantle directly beneath Fogo. In view of the elevated upper-mantle temperatures within a hotspot regime, we propose that fracturing induced by magmatic injection is the most likely cause for the observed deep earthquakes.
Highlights
• Full automatized analysis of teleseismic XKS shear wave splitting.
• Rapid analysis of large seismological data sets.
• Automated window selection and quality classification.
• Application to the USArray Transportable Array including expansion to Alaska.
• Improved statistical evidence and objectivity of derived effective splitting.
Abstract
Recent technological advances have led to community wide use of large-scale seismic experiments which produce seismic data on previously impossible scales. Standard processing procedures thus require automatization to facilitate a fast and objective analysis of the data. Among these, XKS-splitting is an important tool to derive first insights into the Earth's deformation regimes at depth by studying seismic anisotropy. Most often, shear-wave splitting is interpreted to represent crystallographic preferred orientation (CPO) of mantle minerals like olivine as dominating feature and can thus be used as a proxy of mantle flow processes. Here, we introduce an addition to the MATLAB®-based SplitRacer tool box (Reiss and Rümpker 2017) which automatizes the entire XKS-splitting procedure. This is achieved by the automatization of 1) choosing a time window based on spectral analyses and 2) categorization of results based on three different XKS-splitting methods (energy minimization, rotation correlation and splitting intensity). This provides effective and objective results for splitting as well as null-measurement results. This extension allows to use SplitRacer without a graphical interface and introduces a bootstrapping statistics as error estimate of the single layer joint splitting method. The procedures are designed to allow a fast and more objective analysis of a vast amount of data, as produced by recent seismic deployments (e.g. USArray, AlpArray). We test this automatization by applying the analysis to the USArray data set, which has approximately 1900 stations with between two to fifteen years of data. We can reproduce the general pattern of the results from former studies with the more objective automatic analysis. Based on a joint-splitting approach, we approximate the splitting effect at individual stations by a single anisotropic layer. As we include null-measurements as well as a larger data set as previous studies, we can provide improved statistical evidence for these effective splitting parameters.
Highlights
• We show the first observations of seismo-acoustic tremor at Oldoinyo Lengai, the world's only active carbonatite volcano.
• We observe significant changes in seismic and acoustic tremor properties and their correlation in one year of data collection.
• Using satellite-based thermal data, we identify different volcanic processes (degassing, lava pond dynamics and spattering).
Abstract
We analyze volcanic tremor from Oldoinyo Lengai, Tanzania, which is currently the only active volcano on Earth producing carbonatitic lavas. Here, we use data from the recent SEISVOL deployment and focus on a co-located seismic and infrasound station about 200 m below the summit. We show the very first observations of seismo-acoustic tremor caused by carbonatitic eruptions. This seismo-acoustic tremor is highly variable throughout the ∼one year of data which we characterize by analyzing its seismic amplitude, duration, recurrence, dominant seismic frequency and harmonics. Frequency gliding occurs frequently and over short (minutes to hours) to long time scales (hours to days) and likely reflects different time-dependent mechanisms, such as evenly-spaced repeating events with a change in inter-event times, crater dynamics that alter resonators, and dike intrusions. Seismic and acoustic wavefields correlate well for stronger eruptive sequences but are only partially coherent which suggests that high-frequency seismic tremor (up to 25 Hz) may be caused by the low viscosity of the carbonatitic melt and not by ground-coupled airwaves. In addition, the comparison between seismic-acoustic and satellite InfraRed thermal data allows us to infer different volcanic activity styles which partially alternate throughout the year: intrusive activity and the construction of hornitos, degassing, activity from a lava pond, and varying styles of extrusive activity, in particular spattering. Our study provides important insights into the eruption dynamics of this peculiar volcano which suggests shallow melt storage within the crater floor.
The metasomatised continental mantle may play a key role in the generation of some ore deposits, in particular mineral systems enriched in platinum-group elements (PGE) and Au. The cratonic lithosphere is the longest-lived potential source for these elements, but the processes that facilitate their pre-concentration in the mantle and their later remobilisation to the crust are not yet well-established. Here, we report new results on the petrography, major-element, and siderophile- and chalcophile-element composition of native Ni, base metal sulphides (BMS), and spinels in a suite of well-characterised, highly metasomatised and weakly serpentinised peridotite xenoliths from the Bultfontein kimberlite in the Kaapvaal Craton, and integrate these data with published analyses. Pentlandite in polymict breccias (failed kimberlite intrusions at mantle depth) has lower trace-element contents (e.g., median total PGE 0.72 ppm) than pentlandite in phlogopite peridotites and Mica-Amphibole-Rutile-Ilmenite-Diopside (MARID) rocks (median 1.6 ppm). Spinel is an insignificant host for all elements except Zn, and BMS and native Ni account for typically <25% of the bulk-rock PGE and Au. High bulk-rock Te/S suggest a role for PGE-bearing tellurides, which, along with other compounds of metasomatic origin, may host the missing As, Ag, Cd, Sb, Te and, in part, Bi that are unaccounted for by the main assemblage.
The close spatial relationship between BMS and metasomatic minerals (e.g., phlogopite, ilmenite) indicates that the lithospheric mantle beneath Bultfontein was resulphidised by metasomatism after initial melt depletion during stabilisation of the cratonic lithosphere. Newly-formed BMS are markedly PGE-poor, as total PGE contents are <4.2 ppm in pentlandite from seven samples, compared to >26 ppm in BMS in other peridotite xenoliths from the Kaapvaal craton. This represents a strong dilution of the original PGE abundances at the mineral scale, perhaps starting from precursor PGE alloy and small volumes of residual BMS. The latter may have been the precursor to native Ni, which occurs in an unusual Ni-enriched zone in a harzburgite and displays strongly variable, but overall high PGE abundances (up to 81 ppm). In strongly metasomatised peridotites, Au is enriched relative to Pd, and was probably added along with S. A combination of net introduction of S, Au +/− PGE from the asthenosphere and intra-lithospheric redistribution, in part sourced from subducted materials, during metasomatic events may have led to sulphide precipitation at ~80–120 km beneath Bultfontein. This process locally enhanced the metallogenic fertility of this lithospheric reservoir. Further mobilisation of the metal budget stored in these S-rich domains and upwards transport into the crust may require interaction with sulphide-undersaturated melts that can dissolve sulphides along with the metals they store.
We investigate the applicability of the well-known multilevel Monte Carlo (MLMC) method to the class of density-driven flow problems, in particular the problem of salinisation of coastal aquifers. As a test case, we solve the uncertain Henry saltwater intrusion problem. Unknown porosity, permeability and recharge parameters are modelled by using random fields. The classical deterministic Henry problem is non-linear and time-dependent, and can easily take several hours of computing time. Uncertain settings require the solution of multiple realisations of the deterministic problem, and the total computational cost increases drastically. Instead of computing of hundreds random realisations, typically the mean value and the variance are computed. The standard methods such as the Monte Carlo or surrogate-based methods are a good choice, but they compute all stochastic realisations on the same, often, very fine mesh. They also do not balance the stochastic and discretisation errors. These facts motivated us to apply the MLMC method. We demonstrate that by solving the Henry problem on multi-level spatial and temporal meshes, the MLMC method reduces the overall computational and storage costs. To reduce the computing cost further, parallelization is performed in both physical and stochastic spaces. To solve each deterministic scenario, we run the parallel multigrid solver ug4 in a black-box fashion.
Reconstructing Oligocene-Miocene paleoelevation contributes to our understanding of the evolutionary history of the European Alps and sheds light on geodynamic and Earth’s surface processes involved in the development of Alpine topography. Despite being one of the most intensively explored mountain ranges worldwide, constraints on the elevation history of the European Alps, however, remain scarce. Here we present stable and clumped isotope geochemistry 15 measurements to provide a new paleoelevation estimate for the mid-Miocene (~14.5 Ma) European Central Alps. We apply stable isotope δ-δ paleoaltimetry on near sea level pedogenic carbonate oxygen isotope (δ18O) records from the Northern Alpine Foreland Basin (Swiss Molasse Basin) and high-Alpine phyllosilicate hydrogen isotope (δD) records from the Simplon Fault Zone (Swiss Alps). We further explore Miocene paleoclimate and paleoenvironmental conditions in the Swiss Molasse Basin through carbonate stable (δ18O, δ13C) and clumped (Δ47) isotope data from three foreland basin sections in different 20 alluvial megafan settings (proximal, mid-fan, and distal). Combined pedogenic carbonate δ18O values and Δ47 temperatures (30 ± 5°C) yield a near sea level precipitation δ18Ow value of -5.8 ± 0.2‰ and in conjunction with the high-Alpine phyllosilicate δD record suggest that the region surrounding the SFZ attained surface elevations of >4000 m no later than the mid-Miocene. Our near sea level δ18Ow estimate is supported by paleoclimate (iGCM Echam5-wiso) modeled δ18O values, which vary between -4.2 and -7.6‰ for the Northern Alpine Foreland Basin.
Stratospheric inorganic chlorine (Cly) is predominantly released from long-lived chlorinated source gases and, to a small extent, very short-lived chlorinated substances. Cly includes the reservoir species (HCl and ClONO2) and active chlorine species (i.e., ClOx). The active chlorine species drive catalytic cycles that deplete ozone in the polar winter stratosphere. This work presents calculations of inorganic chlorine (Cly) derived from chlorinated source gas measurements on board the High Altitude and Long Range Research Aircraft (HALO) during the Southern Hemisphere Transport, Dynamic and Chemistry (SouthTRAC) campaign in austral late winter and early spring 2019. Results are compared to Cly in the Northern Hemisphere derived from measurements of the POLSTRACC-GW-LCYCLE-SALSA (PGS) campaign in the Arctic winter of 2015/2016. A scaled correlation was used for PGS data, since not all source gases were measured. Using the SouthTRAC data, Cly from a scaled correlation was compared to directly determined Cly and agreed well. An air mass classification based on in situ N2O measurements allocates the measurements to the vortex, the vortex boundary region, and midlatitudes. Although the Antarctic vortex was weakened in 2019 compared to previous years, Cly reached 1687±19 ppt at 385 K; therefore, up to around 50 % of total chlorine was found in inorganic form inside the Antarctic vortex, whereas only 15 % of total chlorine was found in inorganic form in the southern midlatitudes. In contrast, only 40 % of total chlorine was found in inorganic form in the Arctic vortex during PGS, and roughly 20 % was found in inorganic form in the northern midlatitudes. Differences inside the two vortices reach as much as 540 ppt, with more Cly in the Antarctic vortex in 2019 than in the Arctic vortex in 2016 (at comparable distance to the local tropopause). To our knowledge, this is the first comparison of inorganic chlorine within the Antarctic and Arctic polar vortices. Based on the results of these two campaigns, the differences in Cly inside the two vortices are substantial and larger than the inter-annual variations previously reported for the Antarctic.
Biogenic organic precursors play an important role in atmospheric new particle formation (NPF). One of the major precursor species is α-pinene, which upon oxidation can form a suite of products covering a wide range of volatilities. Highly oxygenated organic molecules (HOMs) comprise a fraction of the oxidation products formed. While it is known that HOMs contribute to secondary organic aerosol (SOA) formation, including NPF, they have not been well studied in newly formed particles due to their very low mass concentrations. Here we present gas- and particle-phase chemical composition data from experimental studies of α-pinene oxidation, including in the presence of isoprene, at temperatures (−50 and −30 ∘C) and relative humidities (20 % and 60 %) relevant in the upper free troposphere. The measurements took place at the CERN Cosmics Leaving Outdoor Droplets (CLOUD) chamber. The particle chemical composition was analyzed by a thermal desorption differential mobility analyzer (TD-DMA) coupled to a nitrate chemical ionization–atmospheric pressure interface–time-of-flight (CI-APi-TOF) mass spectrometer. CI-APi-TOF was used for particle- and gas-phase measurements, applying the same ionization and detection scheme. Our measurements revealed the presence of C8−10 monomers and C18−20 dimers as the major compounds in the particles (diameter up to ∼ 100 nm). Particularly, for the system with isoprene added, C5 (C5H10O5−7) and C15 compounds (C15H24O5−10) were detected. This observation is consistent with the previously observed formation of such compounds in the gas phase. However, although the C5 and C15 compounds do not easily nucleate, our measurements indicate that they can still contribute to the particle growth at free tropospheric conditions. For the experiments reported here, most likely isoprene oxidation products enhance the growth of particles larger than 15 nm. Additionally, we report on the nucleation rates measured at 1.7 nm (J1.7 nm) and compared with previous studies, we found lower J1.7 nm values, very likely due to the higher α-pinene and ozone mixing ratios used in the present study.
Reconstructing Oligocene–Miocene paleoelevation contributes to our understanding of the evolutionary history of the European Alps and sheds light on geodynamic and Earth surface processes involved in the development of Alpine topography. Despite being one of the most intensively explored mountain ranges worldwide, constraints on the elevation history of the European Alps remain scarce. Here we present stable and clumped isotope measurements to provide a new paleoelevation estimate for the mid-Miocene (∼14.5 Ma) European Central Alps. We apply stable isotope δ–δ paleoaltimetry to near-sea-level pedogenic carbonate oxygen isotope (δ18O) records from the Northern Alpine Foreland Basin (Swiss Molasse Basin) and high-Alpine phyllosilicate hydrogen isotope (δD) records from the Simplon Fault Zone (Swiss Alps). We further explore Miocene paleoclimate and paleoenvironmental conditions in the Swiss Molasse Basin through carbonate stable (δ18O, δ13C) and clumped (Δ47) isotope data from three foreland basin sections in different alluvial megafan settings (proximal, mid-fan, and distal). Combined pedogenic carbonate δ18O values and Δ47 temperatures (30±5 ∘C) yield a near-sea-level precipitation δ18Ow value of ‰ and, in conjunction with the high-Alpine phyllosilicate δD value of ‰, suggest that the region surrounding the Simplon Fault Zone attained surface elevations of >4000 m no later than the mid-Miocene. Our near-sea-level δ18Ow estimate is supported by paleoclimate (iGCM ECHAM5-wiso) modeled δ18O values, which vary between −4.2 ‰ and −7.6 ‰ for the Northern Alpine Foreland Basin.
Stratospheric inorganic chlorine (Cly) is predominantly released from long-lived chlorinated source gases and, to a small extent, very short-lived chlorinated substances. Cly includes the reservoir species (HCl and ClONO2) and active chlorine species (i.e., ClOx). The active chlorine species drive catalytic cycles that deplete ozone in the polar winter stratosphere. This work presents calculations of inorganic chlorine (Cly) derived from chlorinated source gas measurements on board the High Altitude and Long Range Research Aircraft (HALO) during the Southern Hemisphere Transport, Dynamic and Chemistry (SouthTRAC) campaign in austral late winter and early spring 2019. Results are compared to Cly in the Northern Hemisphere derived from measurements of the POLSTRACC-GW-LCYCLE-SALSA (PGS) campaign in the Arctic winter of 2015/2016. A scaled correlation was used for PGS data, since not all source gases were measured. Using the SouthTRAC data, Cly from a scaled correlation was compared to directly determined Cly and agreed well. An air mass classification based on in situ N2O measurements allocates the measurements to the vortex, the vortex boundary region, and midlatitudes. Although the Antarctic vortex was weakened in 2019 compared to previous years, Cly reached 1687±19 ppt at 385 K; therefore, up to around 50 % of total chlorine was found in inorganic form inside the Antarctic vortex, whereas only 15 % of total chlorine was found in inorganic form in the southern midlatitudes. In contrast, only 40 % of total chlorine was found in inorganic form in the Arctic vortex during PGS, and roughly 20 % was found in inorganic form in the northern midlatitudes. Differences inside the two vortices reach as much as 540 ppt, with more Cly in the Antarctic vortex in 2019 than in the Arctic vortex in 2016 (at comparable distance to the local tropopause). To our knowledge, this is the first comparison of inorganic chlorine within the Antarctic and Arctic polar vortices. Based on the results of these two campaigns, the differences in Cly inside the two vortices are substantial and larger than the inter-annual variations previously reported for the Antarctic.
Biogenic organic precursors play an important role in atmospheric new particle formation (NPF). One of the major precursor species is α-pinene, which upon oxidation can form a suite of products covering a wide range of volatilities. Highly oxygenated organic molecules (HOMs) comprise a fraction of the oxidation products formed. While it is known that HOMs contribute to secondary organic aerosol (SOA) formation, including NPF, they have not been well studied in newly formed particles due to their very low mass concentrations. Here we present gas- and particle-phase chemical composition data from experimental studies of α-pinene oxidation, including in the presence of isoprene, at temperatures (−50 and −30 ∘C) and relative humidities (20 % and 60 %) relevant in the upper free troposphere. The measurements took place at the CERN Cosmics Leaving Outdoor Droplets (CLOUD) chamber. The particle chemical composition was analyzed by a thermal desorption differential mobility analyzer (TD-DMA) coupled to a nitrate chemical ionization–atmospheric pressure interface–time-of-flight (CI-APi-TOF) mass spectrometer. CI-APi-TOF was used for particle- and gas-phase measurements, applying the same ionization and detection scheme. Our measurements revealed the presence of C8−10 monomers and C18−20 dimers as the major compounds in the particles (diameter up to ∼ 100 nm). Particularly, for the system with isoprene added, C5 (C5H10O5−7) and C15 compounds (C15H24O5−10) were detected. This observation is consistent with the previously observed formation of such compounds in the gas phase. However, although the C5 and C15 compounds do not easily nucleate, our measurements indicate that they can still contribute to the particle growth at free tropospheric conditions. For the experiments reported here, most likely isoprene oxidation products enhance the growth of particles larger than 15 nm. Additionally, we report on the nucleation rates measured at 1.7 nm (J1.7 nm) and compared with previous studies, we found lower J1.7 nm values, very likely due to the higher α-pinene and ozone mixing ratios used in the present study.
Although global- and catchment-scale hydrological models are often shown to accurately simulate long-term runoff time-series, far less is known about their suitability for capturing hydrological extremes, such as droughts. Here we evaluated simulations of hydrological droughts from nine catchment scale hydrological models (CHMs) and eight global scale hydrological models (GHMs) for eight large catchments: Upper Amazon, Lena, Upper Mississippi, Upper Niger, Rhine, Tagus, Upper Yangtze and Upper Yellow. The simulations were conducted within the framework of phase 2a of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP2a). We evaluated the ability of the CHMs, GHMs and their respective ensemble means (Ens-CHM and Ens-GHM) to simulate observed hydrological droughts of at least one month duration, over 31 years (1971–2001). Hydrological drought events were identified from runoff-deficits and the Standardised Runoff Index (SRI). In all catchments, the CHMs performed relatively better than the GHMs, for simulating monthly runoff-deficits. The number of drought events identified under different drought categories (i.e. SRI values of -1 to -1.49, -1.5 to -1.99, and ≤-2) varied significantly between models. All the models, as well as the two ensemble means, have limited abilities to accurately simulate drought events in all eight catchments, in terms of their occurrence and magnitude. Overall, there are opportunities to improve both CHMs and GHMs for better characterisation of hydrological droughts.
Lightning climate change projections show large uncertainties caused by limited empirical knowledge and strong assumptions inherent to coarse-grid climate modeling. This study addresses the latter issue by implementing and applying the lightning potential index parameterization (LPI) into a fine-grid convection-permitting regional climate model (CPM). This setup takes advantage of the explicit representation of deep convection in CPMs and allows for process-oriented LPI inputs such as vertical velocity within convective cells and coexistence of microphysical hydrometeor types, which are known to contribute to charge separation mechanisms. The LPI output is compared to output from a simpler flash rate parameterization, namely the CAPE × PREC parameterization, applied in a non-CPM on a coarser grid. The LPI’s implementation into the regional climate model COSMO-CLM successfully reproduces the observed lightning climatology, including its latitudinal gradient, its daily and hourly probability distributions, and its diurnal and annual cycles. Besides, the simulated temperature dependence of lightning reflects the observed dependency. The LPI outperforms the CAPE × PREC parameterization in all applied diagnostics. Based on this satisfactory evaluation, we used the LPI to a climate change projection under the RCP8.5 scenario. For the domain under investigation centered over Germany, the LPI projects a decrease of 4.8% in flash rate by the end of the century, in opposition to a projected increase of 17.4% as projected using the CAPE × PREC parameterization. The future decrease of LPI occurs mostly during the summer afternoons and is related to (i) a change in convection occurrence and (ii) changes in the microphysical mixing. The two parameterizations differ because of different convection occurrences in the CPM and non-CPM and because of changes in the microphysical mixing, which is only represented in the LPI lightning parameterization.
Due to massive energetic investments in woody support structures, trees are subject to unique physiological, mechanical, and ecological pressures not experienced by herbaceous plants. Despite a wealth of studies exploring trait relationships across the entire plant kingdom, the dominant traits underpinning these unique aspects of tree form and function remain unclear. Here, by considering 18 functional traits, encompassing leaf, seed, bark, wood, crown, and root characteristics, we quantify the multidimensional relationships in tree trait expression. We find that nearly half of trait variation is captured by two axes: one reflecting leaf economics, the other reflecting tree size and competition for light. Yet these orthogonal axes reveal strong environmental convergence, exhibiting correlated responses to temperature, moisture, and elevation. By subsequently exploring multidimensional trait relationships, we show that the full dimensionality of trait space is captured by eight distinct clusters, each reflecting a unique aspect of tree form and function. Collectively, this work identifies a core set of traits needed to quantify global patterns in functional biodiversity, and it contributes to our fundamental understanding of the functioning of forests worldwide.
The Izu–Bonin–Mariana volcanic arc is situated at a convergent plate margin where subduction initiation triggered the formation of MORB-like forearc basalts as a result of decompression melting and near-trench spreading. International Ocean Discovery Program (IODP) Expedition 352 recovered samples within the forearc basalt stratigraphy that contained unusual macroscopic globular textures hosted in andesitic glass (Unit 6, Hole 1440B). It is unclear how these andesites, which are unique in a stratigraphic sequence dominated by forearc basalts, and the globular textures therein may have formed. Here, we present detailed textural evidence, major and trace element analysis, as well as B and Sr isotope compositions, to investigate the genesis of these globular andesites. Samples consist of K2O-rich basaltic globules set in a glassy groundmass of andesitic composition. Between these two textural domains a likely hydrated interface of devitrified glass occurs, which, based on textural evidence, seems to be genetically linked to the formation of the globules. The andesitic groundmass is Cl rich (ca. 3000 µg/g ), whereas globules and the interface are Cl poor (ca. 300 µg/g ). Concentrations of fluid-mobile trace elements also appear to be fractionated in that globules and show enrichments in B, K, Rb, Cs, and Tl, but not in Ba and W relative to the andesitic groundmass, whereas the interface shows depletions in the latter, but is enriched in the former. Interestingly, globules and andesitic groundmass have identical Sr isotopic composition within analytical uncertainty ( 87Sr∕86Sr of 0.70580 ± 10 ), indicating that they likely formed from the same source. However, globules show high δ11 B (ca. + 7 ‰ ), whereas their host andesites are isotopically lighter (ca. – 1 ‰ ), potentially indicating that whatever process led to their formation either introduced heavier B isotopes to the globules, or induced stable isotope fractionation of B between globules and their groundmass. Based on the bulk of the textural information and geochemical data obtained from these samples, we conclude that these andesites likely formed as a result of the assimilation of shallowly altered oceanic crust (AOC) during forearc basaltic magmatism. Assimilation likely introduced radiogenic Sr, as well as heavier B isotopes to comparatively unradiogenic and low δ11B forearc basalt parental magmas (average 87Sr∕86Sr of 0.703284). Moreover, the globular textures are consistent with their formation being the result of fluid-melt immiscibility that was potentially induced by the rapid release of water from assimilated AOC whose escape likely formed the interface. If the globular textures present in these samples are indeed the result of fluid-melt immiscibility, then this process led to significant trace element and stable isotope fractionation. The textures and chemical compositions of the globules highlight the need for future experimental studies aimed at investigating the exsolution process with respect to potential trace element and isotopic fractionation in arc magmas that have perhaps not been previously considered.
Knowledge about the initial tectonic and depositional dynamics, as well as the influence of early rifting on climate and environmental evolution remains speculative to a large extent, because sediments are usually deeply buried. Within the East African Rift System, inversion tectonics uplifted a few of these successions to the surface hence presenting rare windows into the pre-rift depositional history. One such example, an exceptional 700 m long and up to 60 m high fresh road cut provided the opportunity to study in detail initial rift successions of the southern Albertine Rift (Western Uganda). This focusses on the basal and poorly known Middle to Late Miocene in order to unravel the climatic, environmental, hydrological and tectonic evolution of the initial Albertine Rift. A large and robust multi-proxy dataset was gathered comprising 169 m of stratigraphic thickness, which spans from 14.5 to 4.9 Ma according to a revised lithostratigraphic model. Fieldwork comprised logging of the sedimentary record, spectral gamma ray, magnetic susceptibility and 2D wall mapping with photomosaics. Additionally, the sections were sampled for bulk mineral and clay mineral analysis. The succession exposes a suite of lithofacies and architectural elements detailing the evolution of a fluvio-lacustrine system. Five depositional environments were identified which show an overall back-stepping trend from an alluvial plain to a delta plain and finally palustrine/shallow lacustrine conditions. Mesoscale base-level cycles, preservation potential of architectural elements, and stacking pattern exhibit limited accommodation space. However, it increases over time. This overall trend indicates increasing tectonic subsidence, which can be explained by flexural downwarp within the pre-rift phase and in the upper part grading into fault-controlled crustal extension of the syn-rift phase, which more and more disrupted a large-scale river system. From the Middle Miocene up to the early Pliocene, this study revealed that palaeoclimate trends become marked by increasing and more fluctuating Th concentrations, loss of feldspar, intercalated lenses of hydroxosulphate minerals, and a shift from smectite-dominated to kaolinite-dominated clays. These signals are all interpreted as detrital except for the hydroxosulphates, and they mirror the increasing intensity of chemical weathering and stripping of soils in the catchment. A trend towards increasing humidity is supported by an increase in lacustrine sediment facies and a lake-level rise. Nevertheless, intercalation of hydroxosulphate, ferricretes and pedogenised horizons prove ongoing seasonality and dry intervals. Finally, based on a revised stratigraphic model a sequence stratigraphic correlation of the outcrop's depositional cycles with basin-scale cycles is presented. According to these cycles, transition from the pre-rift to the syn-rift stage is marked by an unconformity and a tectonic pulse in the latest Miocene. However, the response of fluvial supply, the depositional system as well as climate conditions are less punctuated and characterised by gradual trends and temporal delays. The long pre-rift phase (ca 10 Myr) and the gradual transition to the syn-rift phase is in accordance with the active rifting model, which is based on thermal thinning of the lithosphere by asthenospheric upwelling.
Herein, the high-pressure/high-temperature synthesis (11 GPa, 650 °C) of Tb3B10O17(OH)5 in a modified Walker-type multianvil device is presented. The structure of this rare-earth borate was determined by single-crystal X-ray diffraction methods and was found to crystallize orthorhombically in the space group Pmn21 (no. 31) with the unit cell parameters a = 16.2527(4), b = 4.4373(1), and c = 8.8174(2) Å. The new compound was further characterized using infrared spectroscopy, energy-dispersive X-ray spectroscopy, second harmonic generation (SHG) measurements, and temperature-dependent X-ray powder diffraction. Tb3B10O17(OH)5 decomposes to β-Tb(BO2)3 at temperatures higher than 460 °C. With increasing temperatures, the formation of μ-TbBO3 was observed, which transforms to π-TbBO3 upon cooling.
High-pressure/high-temperature synthesis of the new boron-rich terbium hydroxyborate Tb3B12O19(OH)7
(2023)
Monoclinic Tb3B12O19(OH)7 was obtained by multianvil high-pressure/high-temperature syntheses at 6 GPa and 650 °C. The crystal structure was investigated by single-crystal X-ray diffraction methods and space group C2 (no. 5) with the unit cell parameters a = 24.2299(5) Å, b = 4.4667(1) Å, c = 7.0964(2) Å, β = 94.58(1)°, and two formula units per cell were revealed. Powder X-ray diffraction, infrared spectroscopy and the investigation of its second harmonic generation properties support the proposed structural model.
Local climate change risk assessments (LCCRAs) are best supported by a quantitative integration of physical hazards, exposures and vulnerabilities that includes the characterization of uncertainties. We propose to use Bayesian Networks (BNs) for this task and show how to integrate freely-available output of multiple global hydrological models (GHMs) into BNs, in order to probabilistically assess risks for water supply. Projected relative changes in hydrological variables computed by three GHMs driven by the output of four global climate models were processed using MATLAB, taking into account local information on water availability and use. A roadmap to set up BNs and apply probability distributions of risk levels under historic and future climate and water use was co-developed with experts from the Maghreb (Tunisia, Algeria, Morocco) who positively evaluated the BN application for LCCRAs. We conclude that the presented approach is suitable for application in the many LCCRAs necessary for successful adaptation to climate change world-wide.
At high pressures, autoionization – along with polymerization and metallization – is one of the responses of simple molecular systems to a rise in electron density. Nitrosonium nitrate (NO+NO3−), known for this property, has attracted a large interest in recent decades and was reported to be synthesized at high pressure and high temperature from a variety of nitrogen–oxygen precursors, such as N2O4, N2O and N2–O2 mixtures. However, its structure has not been determined unambiguously. Here, we present the first structure solution and refinement for nitrosonium nitrate on the basis of single-crystal X-ray diffraction at 7.0 and 37.0 GPa. The structure model (P21/m space group) contains the triple-bonded NO+ cation and the NO3− sp2-trigonal planar anion. Remarkably, crystal-chemical considerations and accompanying density-functional-theory calculations show that the oxygen atom of the NO+ unit is positively charged – a rare occurrence when in the presence of a less-electronegative element.
An update of the two-energy turbulence scheme is presented, the 2TE + APDF scheme. The original version of the two-energy scheme is able to successfully model shallow convection without the need of an additional parameterization for non-local fluxes. However, the performance of the two-energy scheme is worse in stratocumulus cases, where it tends to overestimate the erosion of the stable layers. We have identified the causes: the non-local stability parameter does not consider local stratification, the scheme lacks an internal parameter that could distinguish between a shallow convection regime and a stratocumulus regime, and it uses an inflexible turbulence length scale formulation. To alleviate this problem, we propose several modifications: an update of the stability parameter, a modified computation of the turbulence length scale, and the introduction of the entropy potential temperature to distinguish between a shallow convection and a stratocumulus regime. In addition, the two-energy scheme is coupled to a simplified assumed probability density function method in order to achieve a more universal representation of the cloudy regimes. The updated turbulence scheme is evaluated for several idealized cases and one selected real case in the ICOsahedral Nonhydrostatic (ICON) modeling framework. The results show that the updated scheme corrects the overmixing problem in the stratocumulus cases. The performance of the updated scheme is comparable to the operational setup, and can be thus used instead of the operational turbulence and shallow convection scheme in ICON. Additionally, the updated scheme improves the coupling with dynamics, which is beneficial for the modeling of coherent flow structures in the atmospheric boundary layer.
The accessories perovskite, pyrochlore, zirconolite, calzirtite and melanite from carbonatites and carbonate-rich foidites from the Kaiserstuhl are variously suited for the in situ determination of their U–Pb ages and Sr, Nd- and Hf-isotope ratios by LA-ICP-MS. The 143Nd/144Nd ratios may be determined precisely in all five phases, the 176Hf/177Hf ratios only in calzirtite and the 87Sr/86Sr ratios in perovskites and pyrochlores. The carbonatites and carbonate-rich foidites belong to one of the three magmatic groups that Schleicher et al. (1990) distinguished in the Kaiserstuhl on the basis of their Sr, Nd and Pb isotope ratios. Tephrites, phonolites and essexites (nepheline monzogabbros) form the second and limburgites (nepheline basanites) and olivine nephelinites the third. Our 87Sr/86Sr isotope data from the accessories overlap with the carbonatite and olivine nephelinite fields defined by Schleicher et al. (1990) but exhibit a much narrower range. These and the εNd and εHf values plot along the mantle array in the field of oceanic island basalts relatively close to mid-ocean ridge basalts. Previously reported K–Ar, Ar–Ar and fission track ages for the Kaiserstuhl lie between 16.2 and 17.8 Ma. They stem entirely from the geologically older tephrites, phonolites and essexites. No ages existed so far for the geologically younger carbonatites and carbonate-rich foidites except for one apatite fission track age (15.8 Ma). We obtained precise U–Pb ages for zirconolites and calzirtites of 15.66, respectively 15.5 Ma (± 0.1 2σ) and for pyrochlores of 15.35 ± 0.24 Ma. Only the perovskites from the Badberg soevite yielded a U–P concordia age of 14.56 ± 0.86 Ma while the perovskites from bergalites (haüyne melilitites) only gave 206Pb/238U and 208Pb/232Th ages of 15.26 ± 0.21, respectively, 15.28 ± 0.48 Ma. The main Kaiserstuhl rock types were emplaced over a time span of 1.6 Ma almost 1 million years before the carbonatites and carbonate-rich foidites. These were emplaced within only 0.32 Ma.
Living on the edge: environmental variability of a shallow late Holocene cold-water coral mound
(2022)
Similar to their tropical counterparts, cold-water corals (CWCs) are able to build large three-dimensional reef structures. These unique ecosystems are at risk due to ongoing climate change. In particular, ocean warming, ocean acidification and changes in the hydrological cycle may jeopardize the existence of CWCs. In order to predict how CWCs and their reefs or mounds will develop in the near future one important strategy is to study past fossil CWC mounds and especially shallow CWC ecosystems as they experience a greater environmental variability compared to other deep-water CWC ecosystems. We present results from a CWC mound off southern Norway. A sediment core drilled from this relatively shallow (~ 100 m) CWC mound exposes in full detail hydrographical changes during the late Holocene, which were crucial for mound build-up. We applied computed tomography, 230Th/U dating, and foraminiferal geochemical proxy reconstructions of bottom-water-temperature (Mg/Ca-based BWT), δ18O for seawater density, and the combination of both to infer salinity changes. Our results demonstrate that the CWC mound formed in the late Holocene between 4 kiloannum (ka) and 1.5 ka with an average aggradation rate of 104 cm/kiloyears (kyr), which is significantly lower than other Holocene Norwegian mounds. The reconstructed BWTMg/Ca and seawater density exhibit large variations throughout the entire period of mound formation, but are strikingly similar to modern in situ observations in the nearby Tisler Reef. We argue that BWT does not exert a primary control on CWC mound formation. Instead, strong salinity and seawater density variation throughout the entire mound sequence appears to be controlled by the interplay between the Atlantic Water (AW) inflow and the overlying, outflowing Baltic-Sea water. CWC growth and mound formation in the NE Skagerrak was supported by strong current flow, oxygen replenishment, the presence of a strong boundary layer and larval dispersal through the AW, but possibly inhibited by the influence of fresh Baltic Water during the late Holocene. Our study therefore highlights that modern shallow Norwegian CWC reefs may be particularly endangered due to changes in water-column stratification associated with increasing net precipitation caused by climate change.
We performed an experiment under long-term microgravity conditions aboard the International Space Station (ISS) to obtain information on the energetics and experimental constraints required for the formation of chondrules in the solar nebula by ’nebular lightning’. As a simplified model system, we exposed porous forsterite (Mg2 SiO4) dust particles to high-energetic arc discharges. The characterization of the samples after their return by synchrotron microtomography and scanning electron microscopy revealed that aggregates had formed, consisting of several fused Mg2SiO4 particles. The partial melting and fusing of Mg2SiO4 dust particles under microgravity conditions leads to a strong reduction of their porosity. The experimental outcomes vary strongly in their appearance from small spherical melt-droplets (∅≈90 µm) to bigger and irregularly shaped aggregates (∅≈350 µm). Our results provided new constraints with respect to energetic aspects of chondrule formation and a roadmap for future and more complex experiments on Earth and in microgravity conditions.
Several past summer floods in Central Europe were associated with so-called Vb‑cyclones propagating from the Mediterranean Sea north-eastward to Central Europe. This study illustrates the usefulness of the parametric transfer entropy measure TE‑linear in investigating heavy Vb‑cyclone precipitation events in the Odra catchment (Poland). With the application of the TE‑linear approach, we confirm the impact of the Mediterranean Sea on precipitation intensification. Moreover, we also detect significant information exchange to Vb‑cyclone precipitation from evaporation over the European continent along the typical Vb‑cyclone pathway. Thus, the Mediterranean Sea could enhance the Vb‑cyclone precipitation by pre-moistening continental moisture source regions that contribute to precipitation downstream in the investigated catchments. Overall, the transfer entropy approach with the measure TE‑linear proved to be computationally effective and complementary to traditional methods such as Lagrangian and Eulerian diagnostics.
Climatic and biogeographical drivers of functional diversity in the flora of the Canary Islands
(2022)
Aim: Functional traits can help us to elucidate biogeographical and ecological processes driving assemblage structure. We analysed the functional diversity of plant species of different evolutionary origins across an island archipelago, along environmental gradients and across geological age, to assess functional aspects of island biogeographical theory.
Location: Canary Islands, Spain.
Major taxa studied: Spermatophytes.
Time period: Present day.
Methods: We collected data for four traits (plant height, leaf length, flower length and fruit length) associated with resource acquisition, competitive ability, reproduction and dispersal ability of 893 endemic, non-endemic native and alien plant species (c. 43% of the Canary Island flora) from the literature. Linking these traits to species occurrences and composition across a 500 m × 500 m grid, we calculated functional diversity for endemic, non-endemic native and alien assemblages using multidimensional functional hypervolumes and related the resulting patterns to climatic (humidity) and island biogeographical (geographical isolation, topographic complexity and geological age) gradients.
Results: Trait space of endemic and non-endemic native species overlapped considerably, and alien species added novel trait combinations, expanding the overall functional space of the Canary Islands. We found that functional diversity of endemic plant assemblages was highest in geographically isolated and humid grid cells. Functional diversity of non-endemic native assemblages was highest in less isolated and humid grid cells. In contrast, functional diversity of alien assemblages was highest in arid ecosystems. Topographic complexity and geological age had only a subordinate effect on functional diversity across floristic groups.
Main conclusions: We found that endemic and non-endemic native island species possess similar traits, whereas alien species tend to expand functional space in ecosystems where they have been introduced. The spatial distribution of the functional diversity of floristic groups is very distinct across environmental gradients, indicating that species assemblages of different evolutionary origins thrive functionally in dissimilar habitats.
In order to gain further insights into early solar system aggregation processes, we carried out an experiment on board the International Space Station, which allowed us to study the behavior of dust particles exposed to electric arc discharges under long-term microgravity. The experiment led to the formation of robust, elongated, fluffy aggregates, which were studied by scanning electron microscopy, electron backscatter diffraction, and synchrotron micro-computed tomography. The morphologies of these aggregates strongly resemble the typical shapes of fractal fluffy-type calcium-aluminum-rich inclusions (CAIs). We conclude that a small amount of melting could have supplied the required stability for such fractal structures to have survived transportation and aggregation to and compaction within planetesimals. Other aggregates produced in our experiment have a massy morphology and contain relict grains, likely resulting from the collision of grains with different degrees of melting, also observed in some natural CAIs. Some particles are surrounded by igneous rims, which remind in thickness and crystal orientation of Wark–Lovering rims; another aggregate shows similarities to disk-shaped CAIs. These results imply that a (flash-)heating event with subsequent aggregation could have been involved in the formation of different morphological CAI characteristics.
Convective rain cell properties and the resulting precipitation scaling in a warm-temperate climate
(2022)
Convective precipitation events have been shown to intensify at rates exceeding the Clausius–Clapeyron rate (CC rate) of ca. 7% K−1 under current climate conditions. In this study, we relate atmospheric variables (low-level dew point temperature, convective available potential energy, and vertical wind shear), which are regarded as ingredients for severe deep convection, to properties of convective rain cells (cell area, maximum precipitation intensity, lifetime, precipitation sum, and cell speed). The rain cell properties are obtained from a rain gauge-adjusted radar dataset in a mid-latitude region, which is characterized by a temperate climate with warm summers (Germany). Different Lagrangian cell properties scale with dew point temperature at varying rates. While the maximum precipitation intensity of cells scales consistently at the CC rate, the area and precipitation sum per cell scale at varying rates above the CC rate. We show that this super-CC scaling is caused by a covarying increase of convective available potential energy with dew point temperature. Wind shear increases the precipitation sum per cell mainly by increasing the spatial cell extent. From a Eulerian point of view, this increase is partly compensated by a higher cell velocity, which leads to Eulerian precipitation scaling rates close to and slightly above the CC rate. Thus, Eulerian scaling rates of convective precipitation are modulated by convective available potential energy and vertical wind shear, making it unlikely that present scaling rates can be applied to future climate conditions. Furthermore, we show that cells that cause heavy precipitation at fixed locations occur at low vertical wind shear and, thus, move relatively slowly compared to typical cells.
Moisture sources of heavy precipitation in Central Europe in synoptic situations with Vb-cyclones
(2022)
During the past century, several extreme summer floods in Central Europe were associated with so-called Vb-cyclones propagating from the Mediterranean Sea north-eastward to Central Europe. The processes intensifying the precipitation in synoptic situations with Vb-cyclones in the Danube, Elbe, and Odra catchments are only partially understood. Our study aims to investigate these processes with Lagrangian moisture-source diagnostics for 16 selected Vb-events. Moreover, we analyse the characteristics of typical moisture source regions during 1107 Vb-events from 1901 to 2010 based on ERA-20C reanalysis dynamically downscaled with COSMO-CLM+NEMO. We observe moisture contributions by various source regions highlighting the complex dynamical interplay of different air masses leading to moisture convergence in synoptic situations with Vb-cyclones. Overall, up to 80% of the precipitation originates from the European continent, indicating the importance of continental moisture recycling, especially within the respective river catchment. Other major moisture uptake regions are the North Sea, the Baltic Sea, the North Atlantic, and for a few events the Black Sea. Remarkably, anomalies in these oceanic source regions show no connection to precipitation amounts in synoptic situations with Vb-cyclones. In contrast, the Vb-cyclones with the highest precipitation are associated with anomalously high evaporation in the Mediterranean Sea, even though the Mediterranean Sea is only a minor moisture source region on average. Interestingly, the evaporation anomalies are not connected with sea-surface temperature but with wind-speed anomalies (Spearman’s rank correlation coefficient R≈0.7, significant with p<0.01) indicating mainly dynamically driven evaporation. The particular role of the Mediterranean Sea hints towards possible importance of Mediterranean moisture for the early-stage intensification of Vb-cyclones and the pre-moistening of the continental uptake regions upstream of the target catchments.
The Yacoraite Formation (Salta rift, Argentina) consists of Maastrichtian–Danian lacustrine carbonate and siliciclastic deposits with interbedded volcanic ash layers, organized in four third-order stratigraphic sequences. It offers the exceptional opportunity to jointly apply in situ zircon and carbonate U-Pb geochronology that resulted in two distinct depositional age depth models. Ages of the youngest zircon population from ash layers were linearly interpolated to derive a zircon depositional age depth model. A carbonate depositional age depth model was instead obtained from dated carbonate phases including microbialites, ooids, oncoids of calcitic and dolomitic mineralogy as well as early lacustrine calcite cements. Mean ages were defined from different carbonate phases belonging to the same layer and then linearly interpolated. Sedimentation rates were calculated from both depth models between pairs of dated samples and used to estimate the age of sequence boundaries, as well as the duration of the four stratigraphic sequences. The zircon and carbonate depositional age depth models agree with biostratigraphic constraints and exhibit excellent consistency. The onset and end of sedimentation were estimated at 68.2 ± 0.9 Ma and 62.3 ± 0.6 Ma (duration ca 5.7 Ma) via zircon geochronology and at 67.9 ± 1.7 Ma and 61.9 ± 1.3 Ma (duration ca 6.0 Ma) via carbonate geochronology. Results from this study show that with suitable samples and a newly implemented working strategy, in situ U-Pb dating of depositional and early diagenetic carbonates represent a valuable chronostratigraphic tool for estimating sedimentation rate and duration in poorly time-framed depositional systems.
Diamonds growing in the Earth’s mantle often trap inclusions of fluids that are highly saline in composition. These fluids are thought to emerge from deep in subduction zones and may also be involved in the generation of some of the kimberlite magmas. However, the source of these fluids and the mechanism of their transport into the mantle lithosphere are unresolved. Here, we present experimental results showing that alkali chlorides are stable solid phases in the mantle lithosphere below 110 km. These alkali chlorides are formed by the reaction of subducted marine sediments with peridotite and show identical K/Na ratios to fluid inclusions in diamond. At temperatures >1100°C and low pressures, the chlorides are unstable; here, potassium is accommodated in mica and melt. The reaction of subducted sediments with peridotite explains the occurrence of Mg carbonates and the highly saline fluids found in diamonds and in chlorine-enriched kimberlite magmas.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.
Talc formation via silica-metasomatism of ultramafic rocks is believed to play key roles in subduction zone processes. Yet, the conditions of talc formation remain poorly constrained. We used thermodynamic reaction-path models to assess the formation of talc at the slab-mantle interface and show that it is restricted to a limited set of pressure–temperature conditions, protolith, and fluid compositions. In contrast, our models predict that chlorite formation is ubiquitous at conditions relevant to the slab-mantle interface of subduction zones. The scarcity of talc and abundance of chlorite is evident in the rock record of exhumed subduction zone terranes. Talc formation during Si-metasomatism may thus play a more limited role in volatile cycling, strain localization, and in controlling the decoupling-coupling transition of the plate interface. Conversely, the observed and predicted ubiquity of chlorite corroborates its prominent role in slab-mantle interface processes that previous studies attributed to talc.
Key Points:
Limited talc formation by Si-metasomatism of ultramafic rocks in subduction zones
Chlorite formation is likely pervasive at the slab-mantle interface
Preferential formation of chlorite has wide-ranging chemical and physical implications for subduction zone processes
Plain Language Summary: In subduction zones, talc can form during chemical reactions of mantle rocks with silica-enriched fluids at the interface between descending oceanic plates and the overriding mantle. Its formation and distribution in subduction zones are believed to affect the volatile budget, rheological properties, and the down-dip limit of the decoupling of the slab-mantle interface. Therefore, illuminating the conditions that facilitate talc formation at high pressure-temperature conditions is key in assessing its roles in fundamental subduction zone processes. Using thermodynamic reaction-path models, we show that the formation of talc at the slab-mantle interface is restricted to a limited set of environmental conditions, because its formation is highly sensitive to the compositions of the mantle rocks and reactant fluids. Contrary to common belief, talc is unlikely to form in high abundance in ultramafic rocks metasomatized by Si-rich slab-derived fluids. Rather, our models predict the ubiquitous formation of chlorite along with other silicate minerals during Si-metasomatism due to the competing effects from other dissolved components that favor their formation over talc. This study calls into question the importance of talc during Si-metasomatism in subduction zones but highlights the more predominant role of chlorite.
Fossil records of early solar irradiation and cosmolocation of the CAI factory: a reappraisal
(2021)
Calcium-aluminum–rich inclusions (CAIs) in meteorites carry crucial information about the environmental conditions of the nascent Solar System prior to planet formation. Based on models of 50V–10Be co-production by in-situ irradiation, CAIs are considered to have formed within ~0.1 AU from the proto-Sun. Here, we present vanadium (V) and strontium (Sr) isotopic co-variations in fine- and coarse-grained CAIs and demonstrate that kinetic isotope effects during partial condensation and evaporation best explain V isotope anomalies previously attributed to solar particle irradiation. We also report initial excesses of 10Be and argue that CV CAIs possess essentially a homogeneous level of 10Be, inherited during their formation. Based on numerical modeling of 50V–10Be co-production by irradiation, we show that CAI formation during protoplanetary disk build-up likely occurred at greater heliocentric distances than previously considered, up to planet-forming regions (~1AU), where solar particle fluxes were sufficiently low to avoid substantial in-situ irradiation of CAIs.
Chloritoid and kyanite coexist in metapelites from the high-pressure/low-temperature Massa Unit in the Alpi Apuane metamorphic complex (Northern Apennines, Italy). The composition of chloritoid is extremely variable throughout the Massa Unit. Fe-chloritoid occurs in association with hematite-free, graphite-bearing schists, whereas strongly zoned Fe-Mg chloritoid is found with hematite and kyanite. We investigated the effect of different bulk Fe2O3 contents in controlling chloritoid composition through phase equilibria modelling of four selected samples, representative of the different chloritoid-bearing parageneses found in the Massa Unit. The ferric iron content, measured through wet chemical titration, ranges from 0 (graphite-chloritoid schist) to 73% of the total iron (hematite-chloritoid schist). We show that Mg-rich chloritoid compositions and stability of kyanite at greenschist to blueschist facies conditions can be reproduced in the MnO–Na2O–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (MnNKFMASHTO) chemical system only considering the presence of significant amounts of ferric iron as part of the bulk composition. The stabilization of kyanite at lower grade is directly linked to the presence of Fe2O3, which renders the reactive bulk rock composition effectively enriched in Al2O3 with respect to Fe and Mg. We also document that high Fe2O3 contents exacerbate the effect of chloritoid fractionation, producing strongly zoned Fe-Mg-chloritoid grains. Finally, the P–T modelling of the Massa Units performed in this study allows, for the first time, the recognition of a two-stage evolution at peak conditions, with an earlier pressure peak (1.2–1.3 GPa at 350–400°C), and a later thermal peak (0.7–1.1 GPa at 440–480°C), compatible with subduction, underthrusting and exhumation of the Adria continental margin during growth of the Northern Apennine orogenic wedge.
In subduction zones, sediments and hydrothermally altered oceanic crust, which together form part of the subducting slab, contribute to the chemical composition of lavas erupted at the surface to form volcanic arcs. Transport of this material from the slab to the overlying mantle wedge is thought to involve discreet melts and fluids that are released from various portions of the slab. We use a meta-analysis of geochemical data from eight globally representative arcs to show that melts and fluids from individual slab components cannot be responsible for the formation of arc lavas. Instead, the data are compatible with models that first invoke physical mixing of slab components and the mantle wedge, widely referred to as high-pressure mélange, before arc magmas are generated.
Titanite is a potentially powerful U–Pb petrochronometer that may record metamorphism, metasomatism, and deformation. Titanite may also incorporate significant inherited Pb, which may lead to inaccurate and geologically ambiguous U–Pb dates if a proper correction is not or cannot be applied. Here, we present laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS)-derived titanite U–Pb dates and trace element concentrations for two banded calcsilicate gneisses from south-central Maine, USA (SSP18-1A and SSP18-1B). Single spot common Pb-corrected dates range from 400 to 280 Ma with ±12–20 Ma propagated 2SE. Titanite grains in sample SSP18-1B exhibit regular core-to-rim variations in texture, composition, and date. We identify four titanite populations: (1) 397 ± 5 Ma (95% CL) low Y + HREE cores and mottled grains, (2) 370 ± 7 Ma high Y + REE mantles and cores, (3) 342 ± 6 Ma cores with high Y + REE and no Eu anomaly, and (4) 295 ± 6 Ma LREE-depleted rims. We interpret the increase in titanite Y + HREE between ca. 397 and ca. 370 Ma to constrain the timing of diopside fracturing and recrystallization and amphibole breakdown. Apparent Zr-in-titanite temperatures (803 ± 36°C at 0.5 ± 0.2 GPa) and increased XDi suggest a thermal maximum at ca. 370 Ma. Population 3 domains dated to ca. 342 Ma exhibit no Eu anomaly and are observed only in compositional bands dominated by diopside (>80 vol%), suggesting limited equilibrium between titanite and plagioclase. Finally, low LREE and high U/Th in Population 4 titanite dates the formation of hydrous phases, such as allanite, during high XH2O fluid infiltration at ca. 295 Ma. In contrast to the well-defined date–composition–texture relationships observed for titanite from SSP18-1B, titanite grains from sample SSP18-1A exhibit complex zoning patterns and little correlation between texture, composition, and date. We hypothesize that the incorporation of variable amounts of radiogenic Pb from dissolved titanite into recrystallized domains resulted in mixed dates spanning 380–330 Ma. Although titanite may reliably record multiple phases of metamorphism, these data highlight the importance of considering U–Pb data along with chemical and textural data to screen for inherited radiogenic Pb.
Reliable identification of chondrules, calcium-aluminum-rich inclusions (CAIs), carbonate grains, and Ca-phosphate grains at depth within untouched, unprepared chondritic samples by a nondestructive analytical method, such as synchrotron X-ray fluorescence (SXRF) computed tomography (CT), is an essential first step before intrusive analytical and sample preparation methods are performed. The detection of a local Ca-enrichment could indicate the presence of such a component, all of which contain Ca as major element and/or Ca-bearing minerals, allowing it to be precisely located at depth within a sample. However, the depth limitation from which Ca-K fluorescence can travel through a chondrite sample (e.g., ∼115 µm through material of 1.5 g cm−3) to XRF detectors leaves many Ca-bearing components undetected at deeper depths. In comparison, Sr-K lines travel much greater distances (∼1700 µm) through the same sample density and are, thus, detected from much greater depths. Here, we demonstrate a clear, positive, and preferential correlation between Ca and Sr and conclude that Sr-detection can be used as proxy for the presence of Ca (and, thus, Ca-bearing components) throughout mm-sized samples of carbonaceous chondritic material. This has valuable implications, especially for sample return missions from carbonaceous C-type asteroids, such as Ryugu or Bennu. Reliable localization, identification, and targeted analysis by SXRF of Ca-bearing chondrules, CAIs, and carbonates at depth within untouched, unprepared samples in the initial stages of a multianalysis investigation insures the valuable information they hold of pre- and post-accretion processes in the early solar system is neither corrupted nor destroyed in subsequent processing and analyses.
Questions: Both species turnover and intraspecific trait variation can affect plant assemblage dynamics along environmental gradients. Here, we asked how community assemblage patterns in relation to species turnover and intraspecific variation differ between endemic and non-endemic species. We hypothesized that endemic species show lower intraspecific variation than non-endemic species because they tend to have high rates of in situ speciation, whereas non-endemic species are expected to have a larger gene pool and higher phenotypic plasticity.
Location: La Palma, Canary Islands.
Methods: We established 44 sampling sites along a directional gradient of precipitation, heat load, soil nitrogen, phosphorus and pH. Along this gradient, we estimated species abundances and measured three traits (plant height, leaf area and leaf thickness) on perennial endemic and non-endemic plant species. In total, we recorded traits for 1,223 plant individuals of 43 species. Subsequently, we calculated community-weighted mean traits to measure the relative contribution of species turnover, intraspecific variation and their covariation along the analysed gradient.
Results: The contribution of intraspecific variation to total variation was similar in endemic and non-endemic assemblages. For plant height, intraspecific variation explained roughly as much variation as species turnover. For leaf area and leaf thickness, intraspecific variation explained almost no variation. Species turnover effects mainly drove trait responses along the environmental gradient, but intraspecific variation was important for responses in leaf area to precipitation.
Conclusions: Despite their distinct evolutionary history, endemic and non-endemic plant assemblages show similar patterns in species turnover and intraspecific variation. Our results indicate that species turnover is the main component of trait variation in the underlying study system. However, intraspecific variation can increase individual species’ fitness in response to precipitation. Overall, our study challenges the theory that intraspecific trait variation is more important for the establishment of non-endemic species compared with endemic species.
Positive plant–plant interactions are thought to drive vegetation patterns in harsh environments, such as semi-arid areas. According to the stress-gradient hypothesis (SGH), the role of positive interactions between species (facilitation) is expected to increase with harshness, predicting associated variation in species composition along environmental gradients. However, the relation between stress and facilitation along environmental gradients is debated. Furthermore, differentiating facilitative interactions from other underlying mechanisms, such as microtopographic heterogeneity, is not trivial. We analysed the spatial co-occurrence relationships of vascular plant species that form patchy vegetation in arid lapilli fields (tephra) from recent volcanic eruptions on La Palma, Canary Islands. Assuming a harshness gradient negatively correlated with elevation because the lower elevations are more arid and water availability is considered the most limiting resource, and that an outcome of facilitation is plants co-occurring in the same patch, from the SGH we expected a greater degree of co-occurrence at lower elevation. We tested this at both the species and the individual plant level. We analysed the species composition of 1277 shrubby vegetation patches at 64 different sampling points, ranging from the coast to around 700 m a.s.l. Patch morphology and microtopographic heterogeneity variables were also measured, to account for their potential effects on the species composition of patches. We used generalized linear models and generalized mixed-effects models to analyse species richness, number of individuals in patches and percentage of patches with positive co-occurrences, and a pairwise co-occurrence analysis combined with a graphical network analysis to reveal positive links between 13 of the species. We found that the percentage of patches with positive co-occurrences increased at higher elevations, in contrast to the predictions of the SGH, but in accordance with a refined stress-gradient hypothesis for arid sites, in which characteristics of the interacting species are incorporated.
Nontarget screening exhibits a seasonal cycle of PM2.5 organic aerosol composition in Beijing
(2022)
The molecular composition of atmospheric particulate matter (PM) in the urban environment is complex, and it remains a challenge to identify its sources and formation pathways. Here, we report the seasonal variation of the molecular composition of organic aerosols (OA), based on 172 PM2.5 filter samples collected in Beijing, China, from February 2018 to March 2019. We applied a hierarchical cluster analysis (HCA) on a large nontarget-screening data set and found a strong seasonal difference in the OA chemical composition. Molecular fingerprints of the major compound clusters exhibit a unique molecular pattern in the Van Krevelen-space. We found that summer OA in Beijing features a higher degree of oxidation and a higher proportion of organosulfates (OSs) in comparison to OA during wintertime, which exhibits a high contribution from (nitro-)aromatic compounds. OSs appeared with a high intensity in summer-haze conditions, indicating the importance of anthropogenic enhancement of secondary OA in summer Beijing. Furthermore, we quantified the contribution of the four main compound clusters to total OA using surrogate standards. With this approach, we are able to explain a small fraction of the OA (∼11–14%) monitored by the Time-of-Flight Aerosol Chemical Speciation Monitor (ToF-ACSM). However, we observe a strong correlation between the sum of the quantified clusters and OA measured by the ToF-ACSM, indicating that the identified clusters represent the major variability of OA seasonal cycles. This study highlights the potential of using nontarget screening in combination with HCA for gaining a better understanding of the molecular composition and the origin of OA in the urban environment.
Vladimir Vernadsky's concept of living matter is central to his biogeochemistry, the science he founded. For several reasons, his original understanding of living matter is one of the most complex notions in the history of the life sciences. First, biogeochemistry is by definition an interdisciplinary enterprise that embraces biology, including evolutionary theory, geology, and chemistry, and combines them into a unique research program. Second, if understood in the original sense as used by Vernadsky, living matter is a concept built into idiosyncratic metaphysics constructed around the so-called principle of life's eternity. Third, the concept of living matter reflects the specificity of Vernadsky's sophisticated philosophy of science as he insisted that 'scientific thought' is a planetary phenomenon as well as a geological force. In our contribution, we will introduce Vernadsky's concept of living matter in its historical context. Accordingly, we will also give some chronology of Vernadsky's work related to the growth of his biosphere concept highlighting the 'Ukrainian' period as it is in this period that he intensively elaborated on the notion of living matter. This will be followed by his theory of living matter as it was formulated in his major works of the later period. We are going to locate the notion of living matter within Vernadsky's theoretical system and demonstrate that he regarded his theory of the living as an evolutionary theory complementary to that of Charles Darwin from the very beginning. Additionally, we will briefly present Vladimir Beklemishev's concept of 'geomerida' which he developed at approximately the same time as Vernadsky was elaborating on his 'living matter' to highlight the specificity of the latter's methodology.
The crystal structure of the high temperature phase of anilinium bromide, C6H5NH3⊕Br⊖ , was studied by X-ray and neutron diffraction at T = 343 K. The refinement supports disordered positions of the -NH3⊕ group. A split-atom model is proposed which includes disorder of the benzene ring. The thermal parameters, hydrogen bond distances, and other experimental data (NMR, NQR, inelastic neutron scattering) are in accordance with this model.
In Memoriam: Kurt Kimpel †
(1950)