Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
Simulations of conformational changes and enzyme-substrate interactions in protein drug targets
(2022)
Finding new drugs is a difficult, time-consuming, and costly challenge, with only a small success rate along the drug discovery pipeline of far less than 10%. The high failure rate of drug discovery projects motivates the integration of computational tools throughout the whole drug discovery pipeline, from target identification to clinical trials. Target identification is the first step in the process. A biological target, e.g., a protein that plays a role in disease, is identified and its molecular mechanism in the disease is studied. Further, a potential binding site on the target, where therapeutic molecules can bind and modulate the target’s activity, needs to be characterized. Computational tools can contribute to improving the initial molecular target elucidation and assessment.
In this thesis, I use computational, physics-based approaches to characterize binding sites of drug targets and to decipher enzyme-substrate interactions, which play a role in disease mechanisms. Molecular dynamics (MD) simulations were applied to study the dynamics of molecules in solution at high temporal and spatial resolution. The method generates time-resolved trajectories of the particles in a system of interest by integrating Newton’s equations of motion numerically, starting from a set of coordinates and velocities. In MD simulations, all atoms of a chosen system, including solvent, are represented explicitly. Atomistic simulations are especially well-suited to study detailed interactions that depend on intermolecular interactions, such as hydration effects, hydrogen bonding, hydrophobic interactions, or subtle chemical differences. System properties are inferred from the trajectories, provided that the force fields, describing the interactions between the particles in the system, have a high accuracy. The bonded and non-bonded interactions are parametrized on experimental and quantum chemical data. The purpose of MD simulations can be to gain insight into the behavior of complex biological systems at molecular level, which often cannot be observed in experiments at the same resolution. With recent advances in computer hardware and simulation software, molecular systems of increasing size and simulation length can be investigated.
In the first part of the thesis, I investigated the conformational ensemble of various protein drug targets. Proteins are dynamic biomacromolecules that can have diverse and nearly isoenergetic conformational states. Ligand binding can shift the equilibrium of this conformational ensemble and can uncover binding sites, called cryptic sites. Cryptic sites only emerge upon small molecule binding and are often flat and featureless, and thus not easily recognized in crystal structures without bound ligands. If new binding sites including cryptic sites are detected, they can potentially be exploited for binding to ligands and enable a druggable target. Druggability is the ability of a protein to bind small, drug-like molecules, which is the basis for rational drug design. In this thesis, I used state-of-the-art physics-based, computational approaches to investigate the conformational ensembles of binding sites. In all studied systems, it is known from experiment that a specific group of ligands can induce conformational changes. The aim is to sample the conformational space made accessible upon ligand binding, yet without using the specific ligand structures or details about their interactions. We are interested in sampling the
pocket conformational states and identifying the respective pocket opening mechanism. For some cases, I additionally assessed whether the observed flexibility is a feature of the protein family, or specific to the protein under consideration.
The first studied system is factor VIIa (FVIIa). FVIIa is an essential part of the coagulation cascade and hence a potential drug target for thrombotic diseases. In addition, I investigated various other trypsin-like serine proteases from the same protein family. The binding pocket of trypsin-like serine proteases is called S1 pocket. An X-ray crystal structure solved by our collaborators reveals that a b-sheet structure in the S1 pocket is distorted by a bound ligand. I resolved the conformational change with MD simulations, starting from the unbound protein structure solvated in water and ions. I observed multiple spontaneous transition events. In 7 out of 22 simulations with the b-sheet as starting structure, the S1 pocket eventually rearranged into a distorted loop structure. These transitions occurred spontaneously and were mediated by water molecules probing the backbone hydrogen bonds. The conformational change studied here controls the onset of substrate binding and catalysis. Furthermore, I used metadynamics simulation, an enhanced-sampling method, to estimate the free energy barrier of this conformational change..
Die P-Typ-ATPasen finden sich in allen Domänen des Lebens und stellen die größte Gruppe aktiver Ionentransporter in Zellen dar. Es handelt sich bei den P-Typ-ATPasen um integrale Membranproteine, die eine große Anzahl verschiedenster Ionen aktiv über eine biologische Membran transportieren. Die für diesen Ionentransport notwendige Energie wird durch Bindung und Hydrolyse von Adenosintriphosphat (ATP) und durch Phosphorylierung des Enzyms gewonnen. Diese, im cytoplasmatischen Teil gewonnene Energie, muss für den Ionentransport von der Phosphorylierungsstelle zur räumlich entfernten transmembranen Ionenbindungsstelle übertragen werden, bei dem das Protein einem Reaktionszyklus mit zwei Hauptkonformationszuständen E1 und E2 unterliegt. Zwischen diesen beiden Zuständen finden große strukturelle Änderungen statt, durch die die Ionenaffintät und die Zugänglichkeit der Ionenbindungsstelle reguliert wird. Da dieser Mechanismus der Energiegewinnung für alle Ionenpumpen dieser Art ähnlich ist, wurde die Ca2+-ATPase und die Na+/K+-ATPase als Modellproteine für die Untersuchung molekularer Mechanismen in P-Typ-ATPasen ausgewählt. Im Rahmen der vorliegenden Arbeit soll die Energietransduktion in P-Typ-ATPasen im Allgemeinen und der Protonengegentransport bzw. ein potentieller Protonentransportweg in der Ca2+-ATPase im Speziellen untersucht werden. Die beiden oben genannten Mechanismen sollen mittels computergestützter Methoden analysiert werden. Vor allem die Ca2+-ATPase ist prädestiniert für computergestützte Untersuchungen, da für diese sehr viele hochaufgelöste Röntgenstrukturdaten vorliegen, wenn auch bisher aufgrund der Größe und Komplexität des Systems nur sehr wenige theoretische Arbeiten durchgeführt wurden. Um den Energietransduktionsmechanismus in P-Typ-ATPasen zu untersuchen, wurde mittels Elektrostatik-Rechnungen der Einfluss eines elektrischen Feldes auf die verschiedenen Transmembranhelices untersucht. Dazu wurde ein Simulationssystem entwickelt, welches aus einem molekularen Kondensator besteht, der im Modell das Anlegen eines homogenen elektrischen Feldes über den Transmembranbereich simuliert. Da es sich bei dem Energietransduktionsmechanismus um einen dynamischen Prozess handelt, wurden die Elektrostatik-Rechnungen um Molekulardynamik-Simulationen erweitert. Mit diesen kann die konformelle Dynamik der P-Typ-ATPasen während der Energietransduktion in die Elektrostatik-Rechnungen einbezogen werden. Aus Spannungsklemmen-Fluorometrie-Experimenten, bei denen eine Spannung über eine Membran angelegt wird, kann geschlossen werden, dass die Helix M5 für die Energietransduktion verantwortlich ist. Mit den in dieser Arbeit durchgeführten Elektrostatik-Rechnungen konnte für verschiedene Enzymzustände der Ca2+-ATPase und für die Na+/K+-ATPase gezeigt werden, dass die Helix M5 die größten Konformeränderungen aufgrund des elektrischen Feldes aufweist. Durch die Erweiterung der Elektrostatik-Rechnungen um die Methode der Molekulardynamik-Simulation konnte zusätzlich die elektrische Feldstärke reduziert werden. Auch dabei zeigte sich, dass auf der Helix M5 die meisten Rotameränderungen durch das elektrische Feld induziert werden. Die aus Experimenten vermutete Rolle der Helix M5 als wichtiges Energietransduktionselement ließ sich mit diesen Simulationsrechnungen bestätigen. Um einen möglichen Protonenweg durch den Transmembranbereich der Ca2+-ATPase aufzuklären, wurden explizite Wassermoleküle in sechs verschiedene Enzymzustände der Ca2+-ATPase eingefügt. Aus Experimenten ist bekannt, dass in der Ca2+-ATPase ein Protonengegentransport stattfindet. Deshalb wurden für verschiedene Enzymzustände der Ca2+-ATPase mittels Elektrostatik-Rechnungen die Protonierungen der eingefügten Wassermoleküle sowie der titrierbaren Aminosäuren bestimmt. Aus den Ergebnissen dieser Rechnungen kann geschlossen werden, dass es sich bei dem Protonentransfer nicht um einen linearen Transport der Protonen handelt. Die Untersuchungen zeigen einen mehrstufigen Prozess, an dem Protonen in verschiedenen Transmembranbereichen der Ca2+-ATPase beteiligt sind. Anhand der berechneten Protonierungszustände der eingefügten Wassermoleküle und der pK-Werte der Aminosäuren im Transmembranbereich konnte weiterhin ein möglicher Protonenweg identifiziert werden.
Es wurde eine neue Routine zur Berechnung der Raumladungskräfte basierend auf einer schnellen Fourier-Transformation entwickelt und in das Teilchensimulationsprogramm LORASR integriert. Dadurch werden einzelne oder bis zu mehreren 100 Simulationen im Batch-Modus mit je 1 Million Makroteilchen und akzeptablen Rechenzeiten ermöglicht. Die neue Raumladungsroutine wurde im Rahmen der Europäischen „High Intensity Pulsed Proton Injectors” (HIPPI) Kollaboration erfolgreich validiert. Dabei wurden verschiedene statische Vergleichstests der Poisson-Solver und schließlich Vergleichsrechnungen entlang des Alvarez-Beschleunigerabschnittes des GSI UNILAC durchgeführt. Darüber hinaus wurden Werkzeuge zum Aufprägen und zur Analyse von Maschinenfehlern entwickelt. Diese wurden erstmals für Fehlertoleranzstudien an der IH-Kavität des Heidelberger Therapiebeschleunigers, am Protonen-Linearbeschleuniger für das FAIR Projekt in Darmstadt sowie am Vorschlag eines supraleitenden CH-Beschleunigers für die “International Fusion Materials Irradiation Facility” (IFMIF) eingesetzt.
Single-electron transport in focused electron beam induced deposition (FEBID)-based nanostructures
(2022)
Mit steigender Komplexität von integrierten Schaltungen im Nanometer-Maÿstab werden immer innovativere Techniken nötig, um diese zu fabrizieren. Dies erfordert einen starken Fokus auf die Kontrolle der Fabrikation akkurater Strukturen und der Materialreinheit, und dies im Zusammenhang mit einer skalierbaren Produktion. In diesem Kontext hat Elektronenstrahlinduzierte Abscheidung (engl. Focused Electron Beam Induced Deposition, FEBID) eine wachsende Aufmerksamkeit im Bereich der Nanostrukturierung gewonnen. Der FEBID-Prozess basiert auf der lokalen Abscheidung von Material auf einem Substrat. Das Deponat entsteht durch die Spaltung von Präkursor-Molekülen durch die Interaktion mit einem Elektronenstrahl entsteht. Als Beispiel sei hier der Präkursor Me3PtCpMe angeführt. Das auf dem Substrat abgelagerte Material besteht aus wenigen Nanometer großen Kristalliten aus Platin, welche in einer Matrix aus amorphem Kohlenstoff eingebettet sind. Die Pt-C FEBID Ablagerungen sind nano-granulare Metalle, deren elektrische Transporteigenschaften die Folge des Zusammenspiels von diffusivem Transport von Ladungen innerhalb der Pt-Kristalliten und temperaturabhängigen Tunneleffekten sind. Das größte Interesse an diesen Materialien liegt an der Möglichkeit, Strukturen für technische Anwendungen im Nanometerbereich herstellen zu können.
In dieser Arbeit wurden Anwendungen, die auf Einzelelektroneneffekten beruhen, ausgewählt, um die FEBID basierte Probenpräparation zu testen. Um Einzelelektronentransport zu ermöglichen, der auf dem Tunneln einzelner Elektronen basiert, müssen alle Parameter wie Grösse und Abstände der Strukturen genauestens definiert sein. Im Rahmen dieser Arbeit wurden Einzelelektronenbausteine entwickelt, die auf zwei unterscheidlichen Anwendungen des Pt-C FEBID-Prozesses basieren. Die beiden Anwendungen sind: 1) Arrays von Gold-Nanopartikeln (Au-NP), welche mittels Pt-Strukturen kontaktiert wurden, die mit FEBID präpariert und anschlieÿend aufgereinigt wurden; 2) Einzelelektronentransistoren (engl. Single-Electron Transistors, SET), deren Inseln aus elektronennachbestrahlten Pt-C FEBID Deponate bestehen. Die elektrischen Eigenschaften der präparierten Nanostrukturen wurden charakterisiert und mit der erzielten Auflösung und Materialqualität in Relation gesetzt. Es wurden Optimierungen an der Präparationsmethode durchgeführt, welche direkt die Leitfähigkeit des Pt-C FEBID-Materials erhöhen. Dies kann durch die Änderung der
Karbonmatrix oder die Erhöhung des metallischen Gehalts der Struktur geschehen. In dieser Arbeit wurde eine katalytische Aufreinigungsmethode von Pt-C FEBID Strukturen für zwei Anwendungen genutzt: zum Einen wurden die aufgereinigten Strukturen als Keimschichten für die nachfolgende ortsgenaue Atomlagenabscheidung (engl. Area-Selective Atomic Layer
Deposition, AS-ALD) von Pt-Dünnschichten genutzt. Zum Anderen wurde diese Technik dafür genutzt, Metallbrücken zwischen den bereits durch Auftropfen zufällig auf dem Substrat aufgebrachten NP-Gruppen und den zuvor aufgebrachten UV-Lithographie (UVL) präparierten Cr-Au Kontakten zu erzeugen. Eine NP-Gruppe ist ein periodisches, granulares Array von Partikeln, welche uniform in Größe und Form sind und einen unterschiedlichen Grad von Ordnung inne haben. Durch die Art des Aufbringens kann die Anordnung der Nanopartikel durch Lösen und Erzeugen der Verbindungen beeinflusst werden. Diese Systeme zeigen ein Verhalten wie Tunnelkontakte mit Coulombblockade und eine Verteilung der Schwellspannung. Die Ergebnisse der elektrischen Messungen bestätigen den Einzelelektronentransport durch die Nanopartikel in einem typischen Elektronentransportregime mit schwacher Kopplung. Trotz dieser Ergebnisse war die Anwendung dieser Technik für die SET Nanostrukturierung nicht erfolgreich. Die Ursache
konnte zurückgeführt werden auf das Vorhandensein von Pt-Partikeln in der Nähe der Kontakte zu den Au-NP-Arrays. Die Pt-Partikel sind durch den FEBID Fertigungsprozess in
der Nähe der vorgegebenen Struktur entstanden. Aus diesem Grund wurde das FEBID Co-Deponat in der folgenden SET-Nanofabrikation entfernt.
Ein SET basiert auf einer Nano-Insel, welche durch Tunnelkontakte mit Source- und Drain-Elektroden verbunden ist. Darüber hinaus besteht eine kapazitive Verbindung zu einer
oder mehreren Gate-Elektrode(n). Innerhalb der Insel gibt es eine feste Anzahl von Elektronen.
In dieser Arbeit wurden die Source-, Drain- und Gate-Kontakte durch Ätzen mittels eines fokussierten Gallium-Strahls erzeugt, was Abstände von 50nm ermöglichte, wohingegen die SET Insel mit Pt-C FEBID-Material erzeugt wurde. Die Leitfähigkeit der Insel aus Pt-C wurde mit anschließender Elektronenbestrahlung erhöht. Als letzter Präparationsmethode wurde ein neueartiges Argon-Ätzverfahren genutzt, um die durch FEBID erzeugten Co-Ablagerungen in der direkten Umgebung der Insel zu entfernen. Durch die Elektronennachbestrhalung kann die Kopplung der einzelnen metallischen Kristalliten angepasst werden. Die Auswirkungen unterschiedlicher starker Tunnelkontakte auf die elektronischen Eigenschaften der Insel und die daraus resultierende Performanz des SETs wurden in dieser Arbeit beobachtet ...
Defossiliation of the energy system is crucial in the face of the impending risks of climate change. Electricity generation by burning fossil fuels is being displaced by renewable energy sources like hydro, wind and solar, driven by support schemes and falling costs from technological advances as well as manufacturing scale effects. The unavoidable shift from flexibly dispatchable generation to weather-dependent spatio-temporally varying generators transforms the generation and distribution of electricity into highly interdependent complex systems in multiple dimensions and disciplines:
In time, different scales, stretching from intra-day, diurnal, synoptic to seasonal oscillations of the weather interact with years and decades of planning and construction of capacity. In space, long-range correlations and local variations of weather systems as well as local bottlenecks in transmission networks affect solutions. The investment decisions about technological mix and spatial distribution of capacity follow economic principles, within restrictions which adapt in social feedback loops to public opinion and lobbyist influences.
In this work, a family of self-consistent models is developed which map physical steady-state operation, capacity investments and exogeneous restrictions of a European electricity system, in higher simultaneous spatial and temporal detail as well as scope than has previously been computationally tractable. Increasing the spatial detail of the renewable resources and co-optimizing the expansion of only a few transmission lines, reveals solutions to serve the European electricity demand at about today’s electricity cost with only 5% of its carbon-dioxide emissions; and importantly their electricity mix differs from the findings at low spatial resolution.
As important intermediate steps,
• new algorithms for the convex optimization of electricity system infrastructure are derived from graph-theoretic decompositions of network flows. Only these enable the investigation of model detail beyond previous computational limitations.
• a comprehensive European electricity network model down to individual substations at the transmission voltage levels is built by combining and completing data from freely available sources.
• a network reduction technique is developed to approximate the detailed model at a sequence of spatial resolutions to investigate the role of spatial scale, and identify a level of spatial resolution which captures all relevant detail, but is still computationally tractable.
• a method to trace the flow of power through the network, which is related to a vector diffusion process on a directed flow graph embedded in a network, is used to analyse the resulting technology mix and its interactions with the power network
The open-source nature of the model and restriction to freely available data encourages an accessible and transparent discussion about the future European electricity system, primarily based on renewable wind and solar resources.
Stability, unfolding and refolding of the outer membrane protein porin from Paracoccus denitrificans was investigated using genetic and spectroscopic methods. Structural and functional activity studies on wild type and mutant porins: The site-directed mutants were constructed based on conserved residues and evidences on the role of certain amino acids from previous studies with OmpF. Secondary structure analysis of wild type and mutants E81Q, W74C, E81Q/D148N, E81Q/D148N/W74C by FTIR and CD spectroscopy are in line with the fact that porins are predominantly ß-sheet structure. The functional activity studies by black lipid bilayer techniques showed that the wild type and mutants W74C, E81Q/D148N, E81Q/D148N/W74C have a conductance of 3.25 nS. For mutant E81Q conductance of 1.25nS was more predominant over 3.25 nS. The activity of the mutants was observed to be far less than the wild type. This indicates that structural similarities does not implies similar functional activity. Thermal stability analysis of porin in detergent micelles and reconstituted into liposomes: Thermal stability analysis of wild type and mutants in detergent micelles showed changes in secondary and quaternary structure. It was found that wild type porin unfolds into aggregated structure with a high transition temperature of 86.2 °C. For mutants E81Q, W74C, E81Q/D148N the transition temperature was found to be 84.2 °C, 80.3 °C and 80.2 °C respectively. Functional activity assays at high temperatures revealed that the protein tends to loose its activity on heating up to 50 °C. This shows that structural stability does not imply functionality in the case of porins. Thermal stability analysis of porin reconstituted into liposomes showed that there was no change in the secondary and quaternary structure of the protein up to 100 °C, revealing that the protein becomes more thermostable when it is reconstituted into liposomes. Refolding of aggregated porin: This study shows that disaggregation of ß-sheet membrane protein porin is possible by changing its chemical and thermodynamic parameters. An increase of the solution pH to 12 or above results in opening up of the aggregated protein into unordered structure, as observed by FTIR and CD spectroscopy. This unordered structure could be refolded into native-like structure forming trimers. The secondary structure of the refolded protein deviated slightly from the native one. The thermal stability analysis of the native-like refolded proteins showed that the unfolding pattern is entirely different when compared to the native porins. pH dependent unfolding of porin: Thermal stability of porin at different pH values showed that the protein is stable in a pH range of 1-11. At pH 12 and above the protein unfolds into unordered structure instead of aggregating. The high pH unfolding of porin is a reversible process. The secondary structure of the refolded protein varied slightly from the native-one. Whereas thermal stability was entirely different. This shows that even though the unfolding of porin at high pH is reversible, it results in changes in local interaction between the amino acids resulting in a difference in stability. Unfolding in presence of urea and guanidinium hydrochloride (GuHCl): Denaturation of porin in the presence of chemical denaturants like urea and GuHCl showed that porin unfold into unordered structure. The unfolding is a reversible process. Unfolded protein was refolded into detergent micelles and liposomes. Refolding into detergent micelles was faster compared to refolding into liposomes, as seen by kinetic gel shift assays. The refolding into liposomes showed the presence of intermediates similar to those reported for OmpF. This study shows the difference in thermal stability of the outer membrane protein porin from Paracoccus denitrificans in detergent micelles and native-like liposomes. It suggests various unfolding pathways, which can be further investigated for unfolding and refolding kinetics. This report also suggests that it is possible to refold a heat-aggregated protein.
In this thesis, we present a detailed consideration of both qualitative and quantitative properties of static spherically symmetric solutions of the Einstein equations with self-interacting scalar fields. Our focus is on solutions with naked singularities. We study the qualitative properties of the solutions of the Einstein equations with real static self-interacting $N$ scalar fields, making some assumptions on self-interaction. We provide a rigorous proof that the corresponding solutions will be regular up to $r=0$. Furthermore, we find the rigorous form of asymptotic solutions near the singularity and at spatial infinity. We construct some examples of spherical-like naked singularities at $r=r_s\neq0$ in curvature coordinates.
We analyze the stability of the previously considered solutions against odd-parity gravitational perturbations and also examine the fundamental quasi-normal modes spectra. For the general class of the self-interaction potential, we demonstrate well-posedness of the initial problem and stability for positively defined potentials. As an example, we numerically study the case of the scalar field with power-law self-interaction potential and find the fundamental quasi-normal modes frequencies. We demonstrate that they differ from the standard Schwarzschild black hole case.
We study in detail the motion of particles in the vicinity of previously considered solutions. Mainly, we are interested in considering properties of the distribution of stable circular orbits around the corresponding configurations and images of the accretion disk for a distant observer. For all cases, we find possible types of stable circular orbit distributions and domains of parameters where they are realized.
We also demonstrate that the presence of self-interaction can lead to a new type of circular orbit distributions, which is absent in the linear massless scalar field case. We build Keplerian disk images in the plane of a distant observer and demonstrate the possibility to mimic the shadows of black holes.
In this thesis we investigate the thermodynamic and dynamic properties of the D-dimensional quantum Heisenberg ferromagnet within the spin functional renormalization group (FRG); a
formalism describing the evolution of the system’s observables as the magnetic exchange inter-action is artificially deformed. Following an introduction providing a self contained summary of the conceptual and mathematical background, we present the spin FRG as developed by Krieg and Kopietz in references [1] and [2] in chapter two. Thereto, the generating functional of the imaginary time-spin correlation functions and its exact flow equation describing the deformation process of the exchange interaction are introduced. In addition, it is highlighted that - in contrast to conventional field-theoretic FRG approaches - the related Legendre trans-formed functional cannot be defined if the exchange interaction is initially switched off. Next, we show that this limitation can be circumvented within an alternativ hybrid approach, which treats transverse and longitudinal spin fluctuations differently. The relevant functionals are introduced and the relations of the corresponding functional Taylor coefficients with the spin correlation functions are discussed. Lastly, the associated flow equations are derived and the possibility of explicit or spontaneous symmetry breaking is taken into account.
In chapter three, we benchmark the hybrid formalism against a calculation of the thermo-dynamic properties of the one and two-dimensional Heisenberg model at low temperatures T and finite magnetic field H. For this purpose, we devise an anisotropic deformation scheme of the exchange interaction which allows for a controlled truncation of the infinite hierarchy of FRG flow equations. Thereby, contact with mean-field and spin-wave theory is made and the violation of the Mermin-Wagner theorem is discussed. To fulfill the latter, the truncation scheme is then complemented by a Ward identity relating the transverse self-energy and the magnetization. The resulting magnetization M (H, T ) and isothermal susceptibility χ(H, T ) are in quantitative agreement with the literature and the established behavior of the transverse correlation length and the zero-field susceptibility close to the critical point is qualitatively reproduced in the limit H → 0.
Finally, we investigate the longitudinal dynamics at low temperatures. To this end, the hierarchy of flow equations is solved within the same anisotropic deformation scheme complemented by an expansion in the inverse interaction range, and the resulting longitudinal dynamic structure factor is calculated within a low-momentum expansion. In D = 3, the large phase space accessible for the decay into transverse magnons yields only a broad hump centered at zero frequency whose width scales linearly in momentum. In contrast, at low temperatures and in a certain range of magnetic fields, a well-defined quasiparticle peak with linear dispersion emerges in D ≤ 2, which we identify as zero-magnon sound. Sound velocity and damping are discussed as a function of temperature and magnetic field, and the relevant momentum-frequency window is estimated and compared to the hydrodynamic
second-magnon regime.
We study the polarization of relativistic fluids using the relativistic density operator at global and local equilibrium. In global equilibrium, a new technique to compute exact expectation values is introduced, which is used to obtain the exact polarization vector for fields of any spin. The same result has been extended to the case of massless fields. Furthermore, it is demonstrated that at local equilibrium not only the thermal vorticity but also the thermal shear contribute to the polarization vector. It is shown that assuming an isothermal local equilibrium, the new term can solve the polarization sign puzzle in heavy ion collisions.
Hinreichend kalte und dichte Quarkmaterie ist ein Farbsupraleiter. Ähnlich wie Elektronen in einem gewöhnlichen Supraleiter bilden Quarks Cooper-Paare. Während bei Elektronen der Austausch von Phononen zu einer Anziehung führt, ist im Falle von Quarks der Antitriplett-Kanal der starken Wechselwirkung attraktiv. Arbeiten in den letzten Jahren haben verschiedene Phasen von farbsupraleitender Quarkmaterie untersucht und sich dabei vor allem auf Phasen konzentriert, m denen der Gesamtspin eines Cooper-Paares verschwindet. In der vorliegenden Dissertation habe ich hauptsächlich Farbsupraleiter diskutiert, deren Cooper-Paare im Spin-Triplett-Kanal kondensieren, d.h. die Cooper-Paare haben den Gesamtspin 1. Diese Art von Supraleiter ist möglicherweise relevant für Systeme in der Natur, wie z.B. das Innere von Neutronensternen. Denn bei der Spin-0-Farbsupraleitung wird vorausgesetzt, dass die Fermi-Impulse zweier Quark-Flavor gleich ist oder zumindest hinreichend klein, was für realistische Systeme, also für nicht zu große Dichten, fragwürdig ist. Diese Einschränkung gibt es im Falle von Spin-1-Farbsupraleitern nicht, da hier Quarks des gleichen Flavors Cooper-Paare bilden. Ich habe in meiner Dissertation die verschiedenen möglichen Phasen eines Spin-1-Farbsupraleiters systematisch klassifiziert. Dies wurde mit Hilfe von gruppen-theoretischen Methoden durchgeführt, basierend auf der Tatsache, dass die Farbsupraleitung durch das theoretische Konzept der spontanen Symmetriebrechung beschrieben werden kann. Ähnlich wie bei supraflüssigem Helium-3 gibt es eine Vielzahl theoretisch möglicher Phasen. Ich habe die physikalischen Eigenschaften von vier dieser Phasen untersucht, nämlich der polaren und planaren Phasen sowie der A- und CSL-(color-spin-locked)Phasen. Mit Hilfe der QCD-Lückengleichung wurde die Energielücke sowie die kritische Temperatur bestimmt. Es stellt sich heraus, dass die Energielücke eines Spin-1-Farbsupraleiters um 2-3 Größenordnungen kleiner ist als die eines Spin-0-Farbsupraleiters, d.h. sie liegt im Bereich von 10 - 100 keV. Zwei besondere Eigenschaften der Energielücke werden diskutiert, nämlich eine 2-Lücken-Struktur, die in zwei der untersuchten Fälle auftritt, sowie mögliche Anisotropien, insbesondere Nullstellen der Lückenfunktion. Die Berechnung der kritischen Temperatur zeigt, dass es durchaus farbsupraleitende Materie in einer Spin-1-Phase im Innern von Neutronensternen geben kann, da die Temperatur von alten Neutronensternen im Bereich von einigen keV oder sogar darunter liegt. Darüber hinaus wurde die Frage untersucht, ob ein Farbsupraleiter auch ein gewöhnlicher Supraleiter ist. In diesem Zusammenhang ist die Frage von Interesse, ob ein Spin-1-Farbsupraleiter gewöhnliche Magnetfelder aus seinem Innern verdrängt, was sicherlich Auswirkungen auf die Observablen eines Neutronensterns hätte. Tatsächlich stellt sich heraus, dass ein Spin-1-Farbsupraleiter, im Gegensatz zu einem Spin-0-Farbsupraleiter, einen elektronmagnetischen Meissner-Effekt aufweist. Dieses Ergebnis wurde mit Hilfe von gruppentheoretischen Überlegungen vorausgesagt und mit Hilfe einer detaillierten Berechnung der Photon-Meissner-Massen bestätigt.