Refine
Year of publication
Document Type
- Doctoral Thesis (595) (remove)
Has Fulltext
- yes (595) (remove)
Is part of the Bibliography
- no (595) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (595) (remove)
Terahertz (THz) radiation lies between the micro and far-infrared range in the electromagnetic spectrum. Compared with microwave and millimeter waves, it has a larger signal bandwidth and extremely narrow antenna beam. Thus, it is easier to achieve high-resolution for imaging and detection applications. The unique properties, such as penetration for majority non-polar materials, non-ionizing characteristic and the spectral fingerprint of materials, makes THz imaging an appealing artifice in the military, biomedical, astronomical communications, and other areas. However, THz radiation’s current low power level and detection sensitivity block THz imaging system from including fewer optical elements than the visible or infrared range. This leads to imaging resolution, contrast, and imaging field of view degenerate and makes the aberration more serious. THz imaging based on the space Fourier spectrum detection is developed in this thesis to achieve high-quality imaging. The main concept of Fourier imaging is by recording the field distribution in the Fourier plane (focal plane) of the imaging system; the information of the target is obtained. The numerical processing method is needed to extract the amplitude and phase information of the imaged target. With additional process, three-dimensional (3D) information can be obtained based on the phase information. The novel recording and reconstructing ways of the Fourier imaging system enables it to have a higher resolution, better contrast, and broader field of view than conventional imaging systems such as microscopy and plane to plane telescopic imaging system.
The work presented in this thesis consists of two imaging systems, one is working at 300 GHz based on the fundamental heterodyne detection of the THz radiation, the other is operated at 600 GHz by utilizing the sub harmonic heterodyne detection technique. The realization and test of the heterodyne detection are based on the THz antenna-coupled field-effect transistor (TeraFET) detector developed by Dr. Alvydas Lisauskas. Both systems use two synchronized electronic multiplier chains to radiate the THz waves. One radiation works as the local oscillator (LO), the other works as illumination with a slight frequency shift, the radiations are mixed on the detector scanning in the Fourier plane to record the complex Fourier spectrum of the imaged target. The LO has the same frequency range as the illuminating radiation for fundamental heterodyne detection but half the frequency range for the sub-harmonic heterodyne detection. The 2-mm resolution, 60-dB contrast, and 5.5-cm diameter imaging area at 300 GHz and the of 500-μm resolution, 40-dB contrast, and 3.5-cm diameter imaging area at 600 GHz are achieved (the 300-GHz illuminating radiation has the approximate power of 600 μW , the 600-GHz illuminating radiation has the approximate power of 60 μW ).
The thesis consists of 6 parts. After the introduction, the second chapter expands on the topic of Fourier optics from a theoretical point of view and the simulations of the Fourier imaging system. First, the theory of the electromagnetic field propagation in free space and through an optical system are investigated to elicit the Fourier transform function of the imaging system. The simulation is used for theoretical considerations and the implementation of a Fourier optic script that allows for numerical investigations on reconstruction. The preliminary imaging field of view and resolution are also demonstrated. The third chapter describes the Fourier imaging system at 300 GHz based on the fundamental heterodyne detection, including the experimental setup, the 2D, and 3D imaging results. The following fourth chapter reports the integration of the TeraFET detector with two substrate lenses (one is a Si lens on the back-side Si substrate, the other is a wax/PTFE lens on the front side containing the bonding wires) for sub-harmonic heterodyne detection at 600 GHz. The characteristic of the wax/PTFE lens at THz range is presented. After that, the compared imaging results between the detector with and without the wax/PTFE lens are shown. The fifth chapter extends the demonstration on the lateral and depth resolution of the Fourier imaging system in detail and uses the experimental results at 600 GHz to validate the analytical predictions. The comparison of the resolution between the Fourier imaging system and the conventional microscopy system proves that the Fourier imaging system has better imaging quality under the same system configuration. The last chapter in this thesis concludes on the findings of the THz Fourier imaging and gives an outlook for the enhancement of the Fourier imaging system at THz range.
This thesis provides a detailed derivation of dissipative spin hydrodynamics from quantum field theory for systems composed of spin-0, spin-1/2, or spin-1 particles.
The Wigner function formalism is introduced for quantum fields in the respective representations of the Poincaré group, and the conserved currents, i.e., the energy-momentum tensor and the total angular momentum tensor, in various so-called pseudogauges are derived. An expansion around the semiclassical limit in powers of the Planck constant is performed.
Subsequently, kinetic equations are obtained for binary elastic scattering, using both the de Groot-van Leeuwen-van Weert and Kadanoff-Baym method, with the latter retaining the effect of quantum statistics. The resulting collision term features both local and nonlocal contributions, with the latter providing a relaxation mechanism for the spin degrees of freedom of the quasiparticles. The local-equilibrium distribution function is derived from the requirement that the local part of the collision term vanishes.
From quantum kinetic theory, dissipative spin hydrodynamics is then constructed via the method of moments, extended to particles with spin. The system of moment equations is closed via the Inverse-Reynolds Dominance (IReD) approach, resulting in a set of equations of motion describing the evolution of both ideal and dissipative degrees of freedom. The application to polarization phenomena relevant to heavy-ion collisions is discussed.
This thesis aims to investigate the properties of hadronic matter by analyzing fluctuations of conserved charges. A transport model (SMASH) is used for these studies to achieve this. The first part of this thesis focuses on examining transport coefficients, specifically the diffusion coefficients of conserved charges and the shear viscosity. The second part investigates equal-time correlations of particle numbers in the form of cumulants. The last chapter studies different aspects of the isobar collision systems Ru and Zr.
As a first step, the hadronic medium and interactions between its constituents are introduced, and simultaneously, their impact on transport coefficients is investigated. The methodology is verified by comparing the results of SMASH with Chapman-Enskog calculations, followed by examining 3-to-1 multi-particle reactions, revealing their influence on shear viscosity and electrical diffusion. The analysis of the full hadron gas considers angle-dependent cross-sections and additional elastic cross-sections via the AQM description, showing significant impacts on transport coefficients. The dependency on the number of degrees of freedom is explored, with noticeable effects on diffusion coefficients but a smaller influence on the shear viscosity. At non-zero baryon chemical potential, the diffusion coefficients are strongly influenced, while the shear viscosity remains unaffected. Overall, the study underscores the importance of individual cross-sections and the modeling of interactions on transport coefficients.
The following chapter explores fluctuations of conserved charges, crucial for understanding phase transitions in heavy-ion collision from the quark-gluon plasma to the hadronic phase. Using SMASH, the impact of global charge conservation on particle number cumulants in subvolumes of boxes simulating infinite matter is studied. Comparisons with simpler systems highlights the influence of hadronic interactions on cumulants, especially via charge annihilation processes and the results from SMASH shows agreement with analytical calculations. Calculations at finite baryon chemical potential reveals a transition from a Poisson to Skellam distribution within the net proton cumulants. It is shown that an unfolding procedure to obtain the net baryon fluctuations from the net proton ones deviates from the actual net baryon result, particularly in larger volumes. Finally, net proton correlations at vanishing baryon chemical potential align with ALICE measurements and the net proton cumulants are unaffected by deuteron formation.
In the next step, the goal is to investigate critical fluctuations in the hadronic medium. Therefore, the hadronic system is initialized with critical equilibrium fluctuations by coupling the hadron resonance gas with the 3D Ising model. The single-particle probability distributions are derived from the principle of maximum entropy. Evolving these distributions in SMASH, their development in an expanding sphere adjusted to experimental conditions can be analyzed. It reveals resonance decay and formations as the primary source that affects the particle cumulants. Because of isospin randomization processes, critical fluctuations are better preserved in net nucleon numbers. However, for the strongest coupling investigated in this work, correlations of the critical field are still present in the final state of the evolution in the net proton fluctuations. Examining cumulant dependence on rapidity windows shows a non-monotonic trend.
In the third part, collisions involving the isobars Ru and Zr are studied at a center-of-mass energy of 200 GeV. Initially, SMASH is used to study the initial conditions to hydrodynamical simulations, emphasizing the importance of the nuclear structure of isobars on the geometry of the collision area. It is found that the deformation parameters notably influence the initial state. Correlations between nucleon-nucleon pairs on eccentricity fluctuations yield no significant effect. Subsequently, the hydrodynamic model vHLLE evolves the previously explored initial conditions and for the transition between the hydrodynamic and kinetic descriptions, the Cooper-Frye formula is used. Usage of the canonical ensemble ensures the exact conservation of the conserved charges B, Q, and S. The neutron skin effect, which changes the charge distribution within Ru nuclei, is additionally considered. Fluctuations are assessed, revealing suppression in large rapidity windows due to global charge conservation. The hadronic phase modifies fluctuations of net pions, net kaons, and net protons via annihilation processes, yet fluctuations remain unaffected by the neutron skin effect.
The core of this work is represented by the investigation of the chiral phase transition, using Monte Carlo simulations and unimproved staggered fermions, both in the weak and strong coupling regimes of Quantum Chromodynamics. Based on recent results from Monte Carlo simulations, both using unimproved staggered fermions and Wilson fermions, the chiral phase transition in the continuum and chiral limit shows compatibility with a second-order phase transition for Nf (number of flavours) in range [2:7], at zero baryon chemical potential. This achievement relies on the analytic continuation of Nf to non-integer values on the lattice, which allows to make use of extrapolation techniques to the chiral limit, where simulations are not possible. Furthermore, these results provide a resolution to the ambiguous scenario for Nf = 2 in the chiral limt. The first part of this thesis is devoted to the investigation of the chiral phase transition when a non-zero imaginary baryon chemical potential is involved, whose value corresponds to the 81% of the Roberge-Weiss one. Using the same extrapolation techniques aforementioned, the order of the chiral phase transition in the continuum and chiral limit shows compatibility with a second-order phase transition for Nf in range [2:6], highlighting a lack of dependence of the order of the chiral phase transition on the imaginary baryon chemical potential value. The second part of this thesis is about the study of the extension of the first-order chiral region in the strong coupling regime, at zero baryon chemical potential. Using Monte Carlo techniques, this can be done by investigating the Z2 boundary on a coarse lattice, whose temporal extent reads Nt = 2, and simulations are realised for Nf = 4, 8. The results in the weak coupling regime show, for $Nt = 8, 6, 4 and fixed Nf value, an inflating first-order chiral region. As in the strong coupling limit a second-order chiral phase transition is expected, the first-order chiral region has to shrink as the strong coupling regime is approached, resulting in a non-monotonic behaviour of the Z2 boundary. For Nf = 8, a critical mass on the Z2 boundary has been obtained, confirming the expected non-monotonic behaviour. For Nf = 4 the results do not provide a unique conclusion: Either a Z2 boundary at extremely low bare quark mass or a second-order chiral phase transition in the O(2) universality class in the chiral limit can take place. In addition to the two main topics, the performances of the second-order minimum norm integrator (2MN) and the fourth-order minimum norm integrator (4MN) have been compared, after implementing the 4MN one in the CL2QCD code used to realise our simulations. The 2MN integrator had already been implemented in the code since the first version was released. The two integrators belong to the class of symplectic integrators and represent an essential component of the RHMC algorithm, involved in our investigation. This step is extremely important, in order to guarantee the best quality when collecting data from simulations, and the results of the comparison suggested to favor the 2MN integrator, for both the topics.
This thesis deals with several aspects of non-perturbative calculations in low-dimensional quantum field theories. It is split into two main parts:
The first part focuses on method development and testing. Using exactly integrable QFTs in zero spacetime dimensions as toy models, the need for non-perturbative methods in QFT is demonstrated. In particular, we focus on the functional renormalization group (FRG) as a non-perturbative exact method and present a novel fluid-dynamic reformulation of certain FRG flow equations. This framework and the application of numerical schemes from the field of computational fluid dynamics (CFD) to the FRG is tested and benchmarked against exact results for correlation functions. We also draw several conclusions for the qualitative understanding and interpretation of renormalization group (RG) flows from this fluid-dynamic reformulation and discuss the generalization of our findings to realistic higher-dimensional QFTs.
The topics discussed in the second part are also manifold. In general, the second part of this thesis deals with the Gross-Neveu (GN) model, which is a prototype of a relativistic QFT. Even though being a model in two spacetime dimensions, it shares many features of realistic models and theories for high-energy particle physics, but also emerges as a limiting case from systems in solid state physics. Especially, it is interesting to study the model at non-vanishing temperatures and densities, thus, its thermodynamic properties and phase structure.
First, we use this model to test and apply our findings of the first part of this thesis in a realistic environment. We analyze how the fluid-dynamic aspects of the FRG realize themselves in the RG flow of a full-fledged QFT and how we profit from this numeric framework in actual calculations. Thereby, however, we also aim at answering a long-standing question: Is there still symmetry breaking and condensation at non-zero temperatures in the GN model, if one relaxes the commonly used approximation of an infinite number of fermion species and works with a finite number of fermions? In short: Is matter (in the GN model) in a single spatial dimension at non-zero temperature always gas-like?
In general, we also use the GN model to learn about the correct description of QFTs at non-zero temperatures and densities. This is of utmost relevance for model calculations in low-energy quan- tum chromodynamics (QCD) or other QFTs in medium and we draw several conclusions for the requirements for stable calculations at non-zero chemical potential.
Precise intensity monitoring at CRYRING@ESR: on designing a Cryogenic Current Comparator for FAIR
(2023)
In the field of today’s beam intensity diagnostic there is a significant gap in the non-interceptive, calibrated measurement of the absolute intensity of continuous (unbunched) dc beams with current amplitudes below 1 μA. At the Facility for Antiproton and Ion Research (FAIR) low-intensity DC beams will occur during slow extraction from the synchrotrons as well as for coasting beams of highly-charged or exotic nuclei in the storage rings. The lack of adequate beam instrumentation limits the experimental program as well as the accuracy of experimental results.
The Cryogenic Current Comparator (CCC) can close the diagnostic gap with a high-precision dc current reading independent of ion-species and of beam parameters. However, the established detector design based on a core with high magnetic permeability and on a radial shield geometry has well-known weaknesses concerning magnetic shielding efficiency and intrinsic current noise. To eliminate these weaknesses, a novel coreless CCC with a co-axial shield was constructed and combined with a high-performance SQUID contributed by the Leibniz-Institute of Photonic Technology (Leibniz-IPHT Jena). The new axial CCC model was compared to a radial CCC with the established design provided by the Friedrich-Schiller-University Jena. According to numerical simulations prepared at TU Darmstadt and test measurements of the detectors in the laboratory, the new design offered a significant improvement of the shielding factor – from 75dB to 207dB at the required dimensions – and eliminated all noise contributions from the core material, promising an improved current resolution. Although the lower inductance of the pickup coil reduced the coupling to the beam significantly, the noise properties of the new CCC type were comparable to the classical version with a high-permeability core. However, the expected decrease of the low-frequency noise and thus an increase of the current resolution could not be observed at this stage of development.
Consequently, the classical CCC based on the radial shielding and high-permeability core had to be installed in CRYRING@ESR to provide best possible intensity measurements for the upcoming experimental campaign. In CRYRING the CCC was operated with beam currents between 1nA and 20μA and with different ion species (H, Ne, O, Pb, U). It was shown that the CCC provides a noise-limited current resolution of better than 3.2 nArms at a bandwidth of 200 kHz as well as a noise level below 40 pA/√Hz above 1 kHz. During the operation, the main noise sources of the accelerator environment had to be identified and suitable mitigation strategies were developed. Temperature and pressure fluctuations were suppressed with a newly-designed cryogenic support system based on a 70 l helium bath cryostat, developed and built in collaboration with the Institut für Luft- und Kältetechnik Dresden, in combination with a helium re-liquefier. The cryogenic operating time was restricted to around 7 days, which must be expanded significantly in the future. Digital filters were developed to remove the perturbations of the helium liquefier and of the neighboring dipole magnets. Given the promising results the CCC system can be considered as a prototype for future CCCs at FAIR.
Precise tune determination and split beam emittance reconstruction at the CERN PS synchrotron
(2023)
In accelerator physics, the need to improve the performance and better control the operating point of an accelerator has become, year after year, an increasingly important need in order to achieve higher energies and brightness, as well as point-like particle beams. If this involves increasingly advanced technological developments (in terms, for example, of materials for more intense superconducting magnets), it can not take place in the absence of targeted studies of linear and non-linear beam dynamics. In the context of this Ph.D. thesis in physics, linear and non-linear dynamics of charged particles in circular accelerators is the topic that will be discussed and treated in detail. In particular, the presentation and discussion of the results will be divided in two main topics: the need to know the physical properties of a proton beam; and the development of innovative methods to determine and study the accelerator’s working point. With regard to the first topic, an innovative procedure will be presented to determine the transverse size of the PS beam in the beam extraction phase. Among the different ways the extraction occurs at the PS, the analysed one is based on the transverse splitting of the beam by means of non-linear fields. Thus, the knowledge of the transverse beam size is not trivial since resonant linear and non-linear beam structures (namely, core and islands) arise and, for each of them, the beam size has to be quantified. This parameter is crucial for two main reasons: the accelerator that will receive the beam exiting the upstream accelerator may have restrictions (physical or magnetic) that involve a partial or total loss of the incoming beam; and any experiments located downstream of the considered accelerator may need a beam with a transversal size as constant as possible; consequently, its monitoring and control are essential. The second topic concerns the accurate determination of the working point of an accelerator, defined as the number of transverse oscillations the particle beam travels per unit of accelerator circumference, both horizontally and vertically. This quantity is called horizontal and vertical tune, respectively. Their knowledge is also crucial to understand whether the beam will be stable or unstable. In fact, not all tune values are acceptable, as there are particular values that bring the beam into resonance. In this configuration, the amplitude of the transverse oscillations of the particles increases in an uncontrolled manner and leads to the loss of all or part of the beam. Note that, in particular operating conditions, the resonant conditions are sought and desired to model, in a suitable way, the transversal shape of the beam, such as the above mentioned PS extraction scheme. It is even clearer how much the determination of the machine working point is essential to determine the operating conditions of an accelerator. In this context, several methods (also taken from the field of applied mathematics) to calculate the tune will be demonstrated and tested numerically on different types of synthetic signals. At the end of this description, the use of experimental data will allow to obtain the benchmark of a new method for the direct calculation of some characteristic quantities of non-linear beam dynamics (namely, the amplitude detuning, i.e. the variation of tune as a function of intensity of the perturbation provided to the beam.
Investigation of the kinematics involved in compton scattering and hard X-ray photoabsorption
(2023)
The present work investigates the kinematics of Compton scattering at gaseous, internally-cool helium and molecular nitrogen targets in the high- and the low-energy regime. Additionally, photoionization at molecular nitrogen with high-energy photons is investigated. These exeprimental regimes were previously inaccessible due to the extremely small cross sections involved. Nowadays, the third- and fourth-generation synchrotron machines produce sufficient photon flux, enabling the investiagtion of the above processes. The utilized cold-target recoil-ion momentum spectroscopy (COLTRIMS) technique further increases the detection efficiency of the observed processes, since it enables full-solid-angle detection by exploiting momentum conservation.
Compton scattering is investigated at both high (helium and N2) and low (helium) photon energies. In the high-energy regime, the impulse approximation is mostly valid, which is not the case for the low-energy regime. The impulse approximation assumes that the Compton-scattering process takes place at a free electron with a momentum distribution as if it was bound, thus ignoring the binding energy of the system. In the low-energy regime, the impulse approximation is not valid.
Photoionization is investigated at high photon energies, where the linear momentum of the photon cannot be neglected, as is the fashion of the commonly used dipole approximation.
Magnetische Quadrupole und Solenoide sind ein elementarer Bestandteil einer Beschleunigeranlage und begrenzen die transversale Ausdehnung eines Teilchenstrahls durch eine Reflexion der Teilchen in Richtung der Beschleunigerachse. Die konventionelle Bauweise als Elektromagnet besteht aus einem Eisenjoch welches mit Spulen umwickelt ist. In dieser Arbeit werden diese Magnetstrukturen auf Basis von Permanentmagneten designt und hinsichtlich ihrer Qualität zum Strahltransport optimiert, sowie Feldmessungen an permanentmagnetischen Quadrupolen durchgeführt. Diese wurden mit 3D-gedruckten Halterungen aus Kunststoff gefertigt, was eine Vielzahl von Formvariationen ermöglicht. Darauf aufbauend wurde ein im Vakuum befindlicher Aufbau entwickelt, mit welchem die Strahlenvelope im inneren eines permanentmagnetischen Quadrupol Tripletts diagnostiziert werden kann. Dies greift auf ein am Institut für angewandte Physik entwickeltes System zur nicht-invasiven Strahldiagnose mithilfe von Raspberry Pi Einplatinencomputern und Kameras in starken Magnetfeldern zurück.
Die in dieser Arbeit vorgestellte Konfiguration eines PMQ’s ist eine Weiterentwicklung des am CERN im Linac4, einem Alvarez-Driftröhrenbeschleuniger zur Beschleunigung von H– , verwendeten Designs. Bei diesem sind je acht quaderförmige Permanentmagnete aus Samarium Cobalt (SmCo) in die Driftröhren des Beschleunigers integriert.
Darauf aufbauend wurden die geometrischen Designparameter hinsichtlich ihres Einflusses auf die Qualität des Magnetfelds untersucht. In einem magnetischen Quadrupol zur Strahlfokussierung wird dies durch einen linearen Anstieg des Magnetfeldes von Quadrupolachse zu Polflächen charakterisiert. Das Design wurde im Zuge dessen zur Verwendung von industriellen Standardgeometrien von Quadermagneten und der Erhöhung der magnetischen Flussdichte erweitert. Dazu wurde untersucht wie sich das Hinzufügen von zusätzlichen Magneten auswirkt und ob eine bessere Feldqualität durch andere Magnetformen erreicht wird.
Die Kombination mehrerer PMQ in geringem Abstand (<10 mm) führt abhängig von der Geometrie der PMQ-Singlets zu einer erheblichen Verschlechterung der Feldlinearität, was eine Erhöhung des besetzten Phasenraumvolumens der Teilchen nach sich zieht.
Am Beispiel von PMQ-Tripletts werden die zu beachtenden Designparameter analysiert und Lösungsansätze vorgestellt. Die auftretenden Effekte werden anhand von Strahldynamiksimulation veranschaulicht. Für eine Anwendung der vorgestellten Designs wurde eine Magnethülle mit einer Wabenstruktur zur Aufnahme der Einzelmagnete entwickelt. Diese besteht aus zwei Halbschalen, welche jeweils den Kompletteinschluss aller Magnete garantiert und eine einfache Montage um ein Strahlrohr ermöglicht. Diese wurden in der Institutswerkstatt aus Kunststoff via 3D-Druck gefertigt. Aufgrund der höheren erreichbaren Magnetisierung wurden Neodym-Eisen-Bor-Magnete (Nd2F14B, Br =1,36 T) für den Bau der entwickelten Strukturen verwendet. Für eine Magnetfeldmessung zur Bestätigung der magnetostatischen Simulationen und einer Bewertung der Druckqualität wurde eine motorisierte xyz-Stage zur Bewegung einer Hallsonde aufgebaut. Die Messungen zeigen eine gute Zentrierung des Magnetfeldes, sodass PMQ mit einer Kunststoffhalterung eine schnelle und billige Möglichkeit sind, kurzfristig eine Quadrupol-Konfiguration aufzubauen. Die Kosten belaufen sich für einen einzelnen PMQ je nach Länge auf 50€ bis 100€.
Basierend auf der PMQ-Struktur wurde ein PMQ-Triplett in ein Vakuum versetzt und mit Raspberry Pi Kameras im Zwischenraum der Singlets ausgestattet. Dies ermöglichte die Aufnahme der Strahlenvelope innerhalb des Tripletts anhand der durch einen Heliumstrahl induzierten Fluoreszenz und erste Erkenntnisse für notwendige Weiterentwicklungen wurden gesammelt. Auf den genauen technischen Aufbau wird im abschließenden Kapitel der Arbeit detailliert eingegangen.
In der einfachsten Form wird ein PM-Solenoid anhand eines einzelnen axial magnetisierten Hohlzylinders realisiert und erzeugt näherungsweise die Feldverteilung einer Zylinderspule. Durch die radialen Magnetfeldkomponenten an den Rändern des Solenoiden erhalten Teilchen eine tangentiale Geschwindigkeitskomponente und führen eine Gyrationsbewegung entlang der Solenoidachse aus. Diese reduziert den Strahlradius und die Teilchen behalten eine Geschwindigkeitskomponente, welche zur Solenoidachse zeigt. Für eine Maximierung dieser Fokussierung muss das Magnetfeld auf die Zylinderachse konzentriert werden. Insbesondere bei einer Verlängerung des Hohlzylinders wird die Kopplung der Polflächen über das Innenvolumen abgeschwächt. Aufgrund dessen wurde ein Design bestehend aus drei Hohlzylindersegmenten entwickelt. Dieses setzt sich aus zwei radial und einem axial magnetisierten Hohlzylinder zusammen und erhöht die mittlere magnetische Flussdichte für ausgewählte Geometrien um einen Faktor zwei im Vergleich zu einem einzelnen Hohlzylinder gleicher Geometrie. Dies ist gleichzusetzen mit einer Vervierfachung der Fokussierstärke, welche quadratisch mit der mittleren magnetischen Flussdichte skaliert. Die Strahldynamischen Konsequenzen werden anhand von Simulationen mit generierten Magnetfeldverteilungen erläutert. Für eine kostengünstige Bauweise wurde eine Design basierend auf quaderförmigen Magneten entwickelt.
Experiments on Vibrational Energy Transfer (VET) in proteins contribute to our understanding of fundamental biological processes such as allostery, dissipation of excess energy, and possibly enzymatic catalysis. While these processes have been studied for a long time, many questions remain unanswered. The aim of this work was to expand the application of existing spectroscopic techniques to investigate VET, seeking tailored solutions for the diversity of proteins and amino acid environments. Additionally, new target proteins were to be established to broaden the spectrum of VET experiments towards the role of VET and low-frequency protein modes (LFMs).
To test their suitability as VET sensors, the non-canonical amino acids (ncAAs) Azidoalanine (N3Ala), azido-L-Homoalanine (Aha), p-azido-Phenylalanine (N3Phe), p-cyano-Phenylalanine (CNPhe), and 4-cyano-Tryptophan (CNTrp) were coupled to the VET donor β-(1-azulenyl)-L-Alanine (AzAla) in dipeptides. Their spectral properties were compared using FTIR and VET spectra in H2O, dimethyl sulfoxide, and tetrahydrofuran.
The solvent strongly influences the measured VET signals, which can be explained by the direct interaction of the solvent with the dipeptides. Additionally, the peak time within the subgroups of azide and nitrile sensors increased with the size of the side chain, indicating the dependence between peak time and the distance between VET donor and sensor. When incorporated into a protein, solvent interactions are less dominant. Therefore, Aha, N3Phe, and CNPhe were additionally incorporated at two different positions in the PDZ protein domain and investigated. Due to Fermi resonances, signals from azide sensors are challenging to predict, unlike those of the nitrile sensors.
Overall, the experiments showed that nitrile groups can serve well as VET sensors, as their lower extinction coefficient is compensated for by a narrower bandwidth. This expands the number of potential target proteins, and sensor incorporation can be less disruptive at various protein locations.
Since the VET donor AzAla can inject the energy of a photon into a protein as vibrational energy at a specific location, it can also be used for the targeted excitation of LFMs. If these modes are involved in an enzymatic reaction, a direct influence on activity is expected. This hypothesis has long existed but has not been definitively verified. Some studies have found evidence for the involvement of LFMs in formate dehydrogenase (FDH) catalysis. Therefore, FDH was chosen for the investigation of LFMs in enzymes. This specific system additionally allows the use of a natural VET sensor: it forms a stable complex with NAD+ and N3-, an excellent IR marker. Thus, it provided the opportunity to test low-molecular-weight non-covalent ligands as VET sensors.
After ensuring sufficient AzAla supply through the internal establishment of an enzymatic synthesis, AzAla could be incorporated at various positions in FDH. Despite spectral overlap between free and bound N3-, the latter could be identified by its narrower FWHM. For some variants, no binding could be observed. Circular dichroism spectra showed that these variants structurally deviate slightly from other variants and the wild type (WT). VET could be observed over 22 Å from two regions of the protein to the N3- bound in the active center, at protein concentrations of below 2 mM. Unbound N3- did not generate signals, allowing it to be added in excess ensuring the saturation of the protein in VET experiments.
The activity of FDH WT and four AzAla mutants was investigated under substrate saturation without and with AzAla excitation. In these experiments, a slight reduction in activity under illumination was observed, even for the WT, who is not expected to interact with the excitation light. So far, a difference in sample temperature cannot be excluded as the cause for this decline.
The presented experiments with FDH illustrate the potential of low-molecular-weight ligands as VET sensors, with N3- being particularly attractive due to its simple structure (preventing Fermi resonances) and its high extinction coefficient. Its use can add many metalloproteins as potential targets for VET experiments and allows investigation without a VET sensor ncAA. Additionally, initial experiments were conducted to measure light-dependent FDH activity. By specifically exciting protein LFMs, this project could contribute in the future to answering longstanding questions about the extraordinary catalytic efficiency of enzymes.