Refine
Year of publication
Document Type
- Doctoral Thesis (729) (remove)
Has Fulltext
- yes (729)
Is part of the Bibliography
- no (729) (remove)
Keywords
- NMR-Spektroskopie (11)
- RNS (9)
- Membranproteine (8)
- RNA (8)
- Paracoccus denitrificans (7)
- Cytochromoxidase (6)
- Ubihydrochinon-Cytochrom-c-Reductase (6)
- ABC-Transporter (5)
- Gentherapie (5)
- HIV (5)
Institute
- Biochemie und Chemie (729) (remove)
Development and implementation of novel optogenetic tools in the nematode Caenorhabditis elegans
(2016)
Optogenetics, though still only a decade old field, has revolutionized research in neurobiology. It comprises of methods that allow control of neural activity by light in a minimally-invasive, spatio-temporally precise and genetically targeted manner. The optogenetic actuators or the genetically encoded light sensitive elements mediate light driven manipulation of membrane potential, intracellular signalling, neuronal network activity and behaviour (Fenno et al. 2011; Dugué et al. 2012). These techniques have been particularly useful for dissecting neural circuits and behaviour in the transparent and genetically amenable nematode model system Caenorhabditis elegans (Husson et al. 2013; Fang-yen et al. 2015).
In fact, C. elegans was the first living organism in which microbial rhodopsin based optogenetic tools (Channelrhodopsin-2 or ChR2, and Halorhodopsin or NpHR) were successfully implemented and bimodal 'remote' control of behaviour was achieved (Nagel et al. 2005; Zhang et al. 2007). Since then it has been a prominent model for the development and application of novel optogenetic tools and techniques, especially in the nervous system which comprises of 302 neurons and is organised in a hierarchical organization. The environmental stimuli are sensed by the sensory neurons, leading to the processing of information by the downstream interneurons, that relay to motor neurons which in-turn synapse onto muscles that drive the movement-based responses.
The microbial rhodopsins like ChR2 and NpHR mediate light driven depolarization and hyperpolarization, respectively and thereby activate or inhibit neural activity. However, they do not allow local control of membrane potential as they are expressed all over the plasma membrane of the cell rather than being restricted to specific domains, for example synaptic sites. Moreover, they completely over-ride the intrinsic activity of the cell, completely bypassing the signal transduction processes inside the cell. Thus, in order to study intracellular signalling and to answer questions pertaining to the endogenous role of receptors and channels in an in-vivo context, the optogenetic tool-kit needs to be expanded.
This thesis aimed at developing and implementing novel optogenetic tools in C. elegans that allow for sub-cellular signalling control as well as endogenous receptor control. These are: two light activated guanylyl cyclases (bPGC and BeCyclOp) to modify cyclic guanosine monophosphate (cGMP) mediated signalling in the sensory neurons, as well as attempts towards rendering endogenous C. elegans receptors - glutamate receptor (GLR-3/-6), acetylcholine receptor (ACR-16), glutamate gated chloride channel (GLC-1) light switchable and to understand their biological function in-vivo.
Organisms respond to sensory cues by activation of a primary receptor followed by relay of information downstream to effector targets by secondary signalling molecules. cGMP is a widely used 2nd messenger in cellular signaling, acting via protein kinase G or cyclic nucleotide gated (CNG) channels. In sensory neurons, cGMP allows for signal modulation and amplification, before depolarization. Chemo-, thermo-, and oxygen-sensation in C. elegans involve sensory neurons that use cGMP as the main 2nd messenger. For example, ASJ is the pheromone sensing neuron regulating larval development, AWC is the chemosensory neuron responding to volatile odours and BAG senses oxygen and carbon dioxide in the environment. In these neurons, cGMP acts downstream of the GPCRs and functions by activating cationic TAX-2/-4 CNG channels, thereby depolarising the sensory neuron. Manipulating cGMP levels is required to access signalling between sensation and sensory neuron depolarization, thereby provide insights into signal encoding. We achieve this by implementing two photo-activatable guanylyl cyclases - 1) a mutated version of Beggiatoa sp. bacterial light-activated adenylyl cyclase, with specificity for GTP (Ryu et al. 2010), termed BlgC or bPGC (Beggiatoa photoactivated guanylyl cyclase) and 2) guanylyl cyclase rhodopsin (Avelar et al. 2014) from Blastocladiella emersonii (BeCyclOp).
bPGC is a BLUF (blue light sensing using flavin) domain containing cyclase which uses FAD as the co-factor and catalyses the synthesis of cGMP from GTP upon activation by blue light. Prior to implementation in sensory neurons, a simpler heterologous system with co-expression of the TAX-2/-4 CNG channel in C. elegans body wall muscle (BWM) was used. The cGMP generated by the light activated cyclases activates the CNG channel leading to the muscle depolarization, thereby causing changes in body length which can be easily scored.
Specific functions of biological systems often require conformational transitions of macromolecules. Thus, being able to describe and predict conformational changes of biological macromolecules is not only important for understanding their impact on biological function, but will also have implications for the modelling of (macro)molecular complex formation and in structure-based drug design approaches. The “conformational selection model” provides the foundation for computational investigations of conformational fluctuations of the unbound protein state. These fluctuations may reveal conformational states adopted by the bound proteins. The aim of this work is to incorporate directional information in a geometry-based approach, in order to sample biologically relevant conformational space extensively. Interestingly, coarse-grained normal mode (CGNM) approaches, e.g., the elastic network model (ENM) and rigid cluster normal mode analysis (RCNMA), have emerged recently and provide directions of intrinsic motions in terms of harmonic modes (also called normal modes). In my previous work and in other studies it has been shown that conformational changes upon ligand binding occur along a few low-energy modes of unbound proteins and can be efficiently calculated by CGNM approaches. In order to explore the validity and the applicability of CGNM approaches, a large-scale comparison of essential dynamics (ED) modes from molecular dynamics (MD) simulations and normal modes from CGNM was performed over a dataset of 335 proteins. Despite high coarse-graining, low frequency normal modes from CGNM correlate very well with ED modes in terms of directions of motions (average maximal overlap is 0.65) and relative amplitudes of motions (average maximal overlap is 0.73). In order to exploit the potential of CGNM approaches, I have developed a three-step approach for efficient exploration of intrinsic motions of proteins. The first two steps are based on recent developments in rigidity and elastic network theory. Initially, static properties of the protein are determined by decomposing the protein into rigid clusters using the graph-theoretical approach FIRST at an all-atom representation of the protein. In a second step, dynamic properties of the molecule are revealed by the rotations-translations of blocks approach (RTB) using an elastic network model representation of the coarse-grained protein. In the final step, the recently introduced idea of constrained geometric simulations of diffusive motions in proteins is extended for efficient sampling of conformational space. Here, the low-energy (frequency) normal modes provided by the RCNMA approach are used to guide the backbone motions. The NMSim approach was validated on hen egg white lysozyme by comparing it to previously mentioned simulation methods in terms of residue fluctuations, conformational space explorations, essential dynamics, sampling of side-chain rotamers, and structural quality. Residue fluctuations in NMSim generated ensemble is found to be in good agreement with MD fluctuations with a correlation coefficient of around 0.79. A comparison of different geometry-based simulation approaches shows that FRODA is restricted in sampling the backbone conformational space. CONCOORD is restricted in sampling the side-chain conformational space. NMSim sufficiently samples both the backbone and the side-chain conformations taking experimental structures and conformations from the state of the art MD simulation as reference. The NMSim approach is also applied to a dataset of proteins where conformational changes have been observed experimentally, either in domain or functionally important loop regions. The NMSim simulations starting from the unbound structures are able to reach conformations similar to ligand bound conformations (RMSD < 2.4 Å) in 4 out of 5 cases of domain moving proteins. In these four cases, good correlation coefficients (R > 0.7) between the RMS fluctuations derived from NMSim generated structures and two experimental structures are observed. Furthermore, intrinsic fluctuations in NMSim simulation correlate with the region of loop conformational changes observed upon ligand binding in 2 out of 3 cases. The NMSim generated pathway of conformational change from the unbound structure to the ligand bound structure of adenylate kinase is validated by a comparison to experimental structures reflecting different states of the pathway as proposed by previous studies. Interestingly, the generated pathway confirms that the LID domain closure precedes the closing of the NMPbind domain, even if no target conformation is provided in NMSim. Hence, the results in this study show that, incorporating directional information in the geometry-based approach NMSim improves the sampling of biologically relevant conformational space and provides a computationally efficient alternative to state of the art MD simulations.
Development of chromium(VI)-free defect etching solutions for application on silicon substrates
(2008)
Silicon wafers such as Silicon on Insulator (SOI) and strained silicon on Insulator (sSOI) are the essential and basic materials of advanced microelectronic devices. However, they often show various kinds of crystal defects which impair the function of these devices. The most efficient method to date, for detecting such defects and for determining their density, is to delineate them by etching the wafers with a suitable etching solution and characterise them via light optical microscopy. Etch pits are formed at defect sites which are etched at a faster rate than at the perfect lattice. The standard etching solution used for SOI and sSOI is a dilute version of Secco. As Secco contains carcinogenic and environmentally hazardous chromium (VI), the use of which is or will be restricted by law in many countries, suitable chromium (VI)-free etching solutions like Organic Peracid Etches (OPE), modified Chemical Polishing Etches (CP) like CP4 mod and mixtures with organic oxidizing agents like chloranil (CA) have been developed for the successful delineation of various types of crystal defects.
However there are still nanometer-sized defects which are hard to detect or escape detection by this method. Copper decoration is a well known method to magnify these defects. It consists in applying a copper nitrate solution to the back of the SOI or sSOI wafer. On annealing, copper diffuses through the substrate and the BOX (buried oxide) to the SOI/sSOI film and on quenching to room temperature, copper precipitates as copper silicide, SiCu3, foremost at crystal defects where the lattice strain is greater than at perfect lattice sites. These silicides increase the volume in these parts of the crystal lattice and defect magnification occurs. A considerable disadvantage of this method is its tendency for artefact formation, when the copper concentration used is too high, with the copper precipitating at the film surface. The consequence is a higher density of etch pits whereby true defect etch pits cannot be differentiated from those caused by artefacts.
The aim of this thesis is to show that the processes of decorating and etching can be combined successfully to delineate all crystal defects in SOI and sSOI. An ideal result would have been to find a copper decoration procedure that decorates all existing crystal defects at a copper concentration that avoids artefact formation.
The fact that the interaction of oligonucleotides follows strict rules has been utilized to create two- or three-dimensional objects made of DNA. With computer-assisted design of DNA sequences, any arbitrary structure on the nanometer- to micrometer-scale can be generated just by hybridization of the needed strands. As astonishing these structures are, without any modification of the DNA strands involved no function can be assigned to them. Many different ways of functionalizing DNA-nanostructures have been developed with light-responsive nanostructures having a rather subordinated role. Almost all light responsive DNA-nanostructures involve the acyclic azobenzene-linking system tAzo based on D-threoninol which is known to work best at elevated temperatures to ensure optimal switching. As the structure of DNA-constructs is mainly maintained by hydrogen-bonding, variation of the temperature should be avoided in order to keep the structure intact.
To develop a light-responsive nanostructure model system with low-temperature operating azobenzene C-nucleosides, DNA-minicircles have been utilized. Those minicircles bear a lariat-like protrusion with a 10 base long single-stranded overhang, which is responsible for the dimerization with a ring bearing a complementary binding region. DNA-minicircles have been produced in a sequential manner by building and purifying the single stranded minicircle first by splint ligation and prepratative PAGE or RP-HPLC, followed by annealing it to the outer ring and subsequent purification by molecular-weight cut-off. Imaging of DNA-minicircles by atomic force microscopy (AFM) was possible with several methods of sample preparation leading to images of varying quality. With the help of AFM, qualitative analysis of the minicircles was possible. It could be shown, that theoretical and empirical size dimensions of the rings and their interactions were in great accordance. Designing the interaction site of the minicircles proved to be the main task in this project. The amount of C-nucleosidic modifications was identified by screening, followed by a screening of their optimal position and binding partners in the counterstrand. Two azobenzene C-nucleosides in a 10mer binding region and abasic sites opposing them appeared to give the best compromise between absolute dimerization ratio and photocontrolled change of it, as identified by native PAGE. In the following, the dimerization ratios of minicircles containing azobenzene C-nucleosides were compared with minicircles containing tAzo and unmodified minicircles. It could be shown, that the tAzo-modification leads to an elevated binding affinity compared to the unmodified minicircles, but the change upon irradiation is relatively humble compared to the C-nucleosides. For the C-nucleosidic modifications dimerization ratios reached a maximum of 40% in favored trans-state, but could be almost completely turned-off when switching into cis-state. In addition, arylazopyrazole-modified C-nucleosides could be switched into trans-state by irradiating at 530 nm, which is an improvement compared to standard azobenzene, as it shifts irradiation wavelength closer to the phototherapeutic window.
The utilization of DNA-analogous C-nucleosides bring two drawbacks with them: the ribose units include the flexibility of the sugar conformation and it is reasonable to think, that upon isomerization of the azobenzene, part of the steric stress generated is compensated by the sugar reconfiguration, which is lost for duplex
destabilization. In addition, the combination of the ribosidic linker end the end-to-end distance of trans-azobenzene causes the chromophore to penetrate deep into the base stack of the opposing strand, causing a serious destabilization even in favored trans-state. The goal was to find a linker system, that combines the benefits of the azobenzene C-nucleoside without the possibility to change sugar conformation and the strong destabilization in the trans-state. For this reason locked azobenzene C-nucleosides in analogy to LNA nucleosides have been synthesized. The synthesis of LNA analogous azobenzene C-nucleosides (LNAzo) was possible over a 16-step synthesis, with the critical step being the addition of in situ lithiated azobenzene to protected sugar aldehyde. Both anomers of LNAzo and mAzo as reference where incorporated into different oligonucleotide test systems by solid phase synthesis for thorough evaluation. It could be shown, that LNAzo β has a similar performance to mAzo in DNA with overall slightly increased TM- and ΔTM-values. Performance of LNAzo β was similar to mAzo even if steric stress is reduced by using abasic sites in the counterstrand opposing the azobenzene. Only in a RNA context, the true potential of LNAzo β could be observed. In a DNA/RNA duplex, photocontrol could be improved by almost 50%, in a RNA/RNA duplex even by over 100%. Although the primary goal was the improvement of the azobenzene C-nucleoside for a DNA-nanostructure context, LNAzo β proved not to give a sufficient improvement in regard to the cost-value ratio. Never the less, the invention of the locked azobenzene C-nucleoside was a huge success for reversible photoregulation of RNA hybridization. With this, a new way to regulate RNA hybridization has been found, which could be used to create RNA therapeutics in an antisense-approach.
As LNAzo β improved duplex stability only in a limited amount in DNA, further improvements on the backbone have been declared futile and focus shifted onto optimization of the chromophore. First, the azobenzene as it is installed on the ribosidic linker decreases duplex stability by forcing its distal aromat deep into opposing base stacking region. It would be an improvement, if in favored trans-state the distal aromat would be positioned in the less confined space of either major or minor groove and only upon isomerization would shift into base pairing region. Second, the azobenzene itself is not able to contribute to attractive interactions aside from relatively weak π-interactions to adjacent nucleobases, which could be improved, if it could partake in hydrogen bonding. For those apparent reasons, 2-phenyldiazenyl-modified purines have been selected as targets. They combine the ability to contribute to hydrogen bonding of nucleobases with the photochomicity of azobenzenes. Both 2’-deoxyadenosine- and 2’-deoxyguanosine-analogue photoswitches dAAzo and dGAzo have been synthesized and incorporated into 10mer DNA test systems by solid phase synthesis. It could be shown, that duplex stability could be increased compared to established azobenzene C-nucleoside. The improvement was stronger for dAAzo than for dGAzo as in the case for guanosine the amino function on the C2-position had to be replaced by the phenyldiazenyl function, reducing its ability to form hydrogen bonds. Unfortunately, photocontrol of duplex stability caused by 2-phenyldiazenyl purines was rather limited. A reason for this could be the positioning of the distal aromat within the duplex, which can be close to the opposing nucleobase (endo-helical) or in greater distance (exo-helical). The exo-helical conformation of the trans-isomer can only switch to the exo-P-cis-conformation, which relocates the distal aromat in the minor groove, without significant impact on duplex stability.
The focus of this thesis has been to further advance and develop existing NMR techniques for the study of protein folding. In order to do so, experimental as well as theoretical approaches have been pursued. From the theoretical side, a successful attempt to the development of a general theory for the treatment of residual dipolar couplings in the case of unfolded proteins has been undertaken. Information contained in residual dipolar couplings is especially valuable due to its long-range nature. The dynamic character of unfolded states of proteins, which may be composed of distinct subsets of conformations, renders reliable interpretation of data a non-trivial task. Statistical-coil-based approaches have been shown to be powerful in data interpretation. A consistent theory based on fundamental polymer physics, however, had not been presented so far. The herein presented model addresses this problem building on the original work by Annila and co-workers. In this work, several shortcomings have been identified. These shortcomings have been corrected here leading to a general approach for the treatment of residual dipolar couplings of unfolded proteins. More specifically, it is shown that, in the case of fully unfolded proteins aligned by a steric mechanism, basic dependencies of dipolar couplings such as on chain length and location with in the chain can be analysed in simple analytical terms. The main predictions of the model are compared to experimental data showing reasonable agreement. The presented mathematical framework is principally suited for various improvements which could include the treatment of long-range interactions and of the actual geometry of the given aligment medium. From the experimental side, bovine alpha-lactalbumin has been chosen as a model system for the development of improved time-resolved 1D NMR methods aiming at the observation of conformational transitions by kinetic means. The presented results show that high-quality data can now be obtained at protein concentrations as low as 100uM. Rate constants characterising distinct conformational transitions of up to 8/s have been measured. These are the fastest rate constants which have been reported so far for protein folding events. The NMR data supplemented by complementary biophysical data furthermore demonstrate that the folding of bovine alpha-lactalbumin is more complex than has been anticipated. All data are consistent with a triangular folding mechanism involving parallel pathways of folding for formation of the native state of the protein. Interestingly, such a folding mechanism has also been found for the highly structurally homologous protein lysoyzme from hen egg white. Evidence is presented that the guiding role of long-range interactions in the unfolded state of lysoyzme for mediating intersubdomain interactions during folding is replaced in the case of bovine alpha-lactalbumin by the Ca2+ binding site.
Die Sulfonyl-Gruppe (-SO2-) ist ein weit verbreitetes Strukturmotiv in der organischen Chemie und Bestandteil vieler biologisch aktiver Moleküle, insbesondere Arzneistoffen. Zwei der am häufigsten auftretenden Gruppen sind Sulfone und Sulfonamide, die in über 100 zugelassenen Medikamenten und 10% der meistverkauften Medikamente sind. Insofern kommt der Entwicklung neuer Synthesemethoden eine große Bedeutung zu. Dabei stehen besonders einfache, wirtschaftliche und zeitsparende Vorgehensweisen im Vordergrund, die eine große Bandbreite an neuen Substanzen generieren können. Ein Ansatz hierfür sind Multikomponenten- oder Eintopfreaktionen.
Aufgrund der Wichtigkeit dieser zwei Strukturklassen, sollen im Rahmen der hier vorliegenden Doktorarbeit neue Syntheserouten für Sulfone und Sulfonamide entwickelt werden. Besonderes Augenmerk wird auf die die Einführung der SO2-Einheit während der Reaktionsführung gelegt. Im Vergleich zu bereits existierenden Verfahren ist dies ein enormer Fortschritt, da die Mehrheit der bekannten Routen auf Schwefel- oder Schwefeldioxid-haltige Startmaterialien zurückgreift.
In der vorliegenden Arbeit gelang es, einen synthetischen Zugang zu Arylsulfonen basierend auf von Natrium-, Lithium-, Magnesium- und Zinksulfinaten zu finden. Diese Reaktion besitzt eine sehr große Anwendungsbandbreite und setzt sowohl Aryl- als auch Alkylsulfinate effizient um. Außerdem weisen Reaktionen mit unsymmetrischen Diaryliodoniumsalzen hohe Chemoselektivitäten auf.
Auf der Grundlage auf der Reaktion zwischen Natriumsulfinaten und Iodoniumsalzen wurde eine simple Route zur Synthese von Diarylsulfonen abgeleitet, jedoch war hierbei die Sulfonylgruppe noch Bestandteil eines der Edukte. Um die SO2-Einheit während der Reaktion einführen zu können, wurde ein praktisches Eintopf-Protokoll entwickelt, welches die direkte Umsetzung von (hetero)aromatischen und alkylischen Halogeniden zu Arylsulfonen gestattet. Diese innovative Methode besteht aus folgenden vier Schritten: (1) Generierung des Organometallreagenzes via Halogen-Metall-Austausch, direkte Metallinsertion oder Deprotonierung; (2) Reaktion des Organometallreagenzes mit SO2 zum Sulfinat; (3) Entfernen des SO2-Überschusses und flüchtiger Komponenten und (4) Umsetzung des nicht aufgereinigten Sulfinates mit einem Iodoniumsalz.
Desweiteren wird in dieser Arbeit ein neuartiger Übergangsmetall-katalysierter Ansatz zur Darstellung von Diarylsulfonen ausgehend von Arylhalogeniden und Sulfinaten diskutiert. Erste Experimente deuten auf Nickel-Katalysatoren als gute Wahl für die Reaktion. Optimierungsreaktionen zeigten eine starke Abhängigkeit der Ausbeute in Hinsicht auf die Bisswinkel der an das zentrale Nickelatom koordinierten Liganden. Da die bis dato besten Ergebnisse mit dem Komplex [o-tol-Ni(PPh2Me)2Cl] erzielt wurden, wird der [o-tol-Ni(PMe3)2Cl]-Komplex momentan in unserem Labor weiteren Studien unterzogen. Bislang ist davon auszugehen, dass dieser Katalysator hervorragende Ergebnisse liefert und zu einer allgemein gültigen Methode führt.
In weiteren Kapiteln wird die Anwendbarkeit von SO2-Surrogaten, Metabisulfiten „S2O52-„ oder DABSO; untersucht; mit dem Ziel eine Eintopf- oder Multikomponentenreaktion zu entwickeln.
Zum einen wird die Entwicklung einer Ein-Topf-Reaktion von Alkylhalogeniden mit Metabisulfiten und Organozinkreagenzien zur Darstellung von Alkylarylsulfonen vorgestellt. Darüber hinaus wird eine Übergangsmetall-katalysierte Multikomponenten Reaktion zur Synthese von Sulfonsäureamiden vorgestellt. Eine Reaktion zwischen Aminen, Arylhalogeniden und DABSO als SO2-Quelle wurde in Form einer Palladium-katalysierten Aminosulfonylierung entwickelt.
This cumulative thesis discusses the development of optimized force field parameters for Magnesium and resulting improved simulations of Magnesium-RNA interactions, including the in silico exploration of binding sites. This thesis is based on four publications as well as unpublished data. A fifth publication that was written during the time of the Ph.D. is discussed in the Appendix. This publication analyzes monovalent ion-specific effects at mica surfaces.
Nucleic acids in general and RNA in particular are fundamental to life itself. Especially in the folding and function of RNA, metal cations are crucial to screen the negatively charged nucleic acid backbones to allow for complex functional structures. They stabilize the tertiary structure of RNA and even drive its folding. Furthermore, similarly to proteins, RNAs can catalyze multiple reactions, rather than consisting of the 20 amino acids of a protein, RNA constitues of only four different building blocks. Metal cations play an important role here as additional cofactors. One essential ion is Magnesium (Mg2+), commonly referred to as the most important cofactor for nucleic acids. Mg2+ carries two positive charges. Its comparably small size and high charge result in a high charge density that has strong polarizing effects on its surroundings. Furthermore, Mg2+ forms a sharply defined first hydration shell with an integer number of coordinating water molecules. As a result, an exclusion zone exists around the ion within which no water molecules are observed. Moreover, Mg2+ displays a high solvation free energy and a low exchange rate of waters from its first hydration shell. Finally, it contains a strong preference towards oxygens . Together, this makes Mg2+ a particularly well suited interaction partner for the charged non-bridging phosphate oxygens on nucleic acid backbones and explains its crucial biological role.
The immense number of physiological and technological functions and applications indicates the significant scientific attention Mg2+ received. In experimental studies, however, severe difficulties arise for multiple reasons: Mg2+ is spectroscopically silent and cannot be detected directly by resonance techniques like NMR or EPR. Indirect observation is possible, either by detecting changes in the overall RNA structure with and without bound Mg2+, or by replacing the Mg2+ ion with another spectroscopically visible ion. In the latter, however, it cannot be guaranteed that the altered ion does not also alter the interaction site or even the whole structure. Another detection method is X-ray crystallography, but here challenges arise from Mg2+ being almost indistinguish- able from other ions as well as from water if not for very high resolutions and precise stereochemical considerations.
Alternatively, molecular dynamics (MD) simulations can be performed, with the power of adding atomistic insight to the interplay of metal cations and nucleic acids. MD simulations, however, are only as accurate as their underlying interaction models and the development of accurate models for the description of Mg2+ faces challenges especially in describing three properties:
(i) Polarizability. Commonly used simple models like the 12-6 type Lennard-Jones model typically fail to reproduce simultaneously thermodynamic and structural properties of a single ion in water. Alternative strategies include the use of a 12-6-4 type Lennard-Jones potential as proposed by Li and Merz, where the additional r−4 term explicitly accounts for polarization effects. The resulting Lennard-Jones potential is thereby more attractive and more long-ranged than for typical models of the 12-6 type.
(ii) Kinetics. Most Mg2+ models either fully ignore considerations about the timescales on which water exchanges from the first hydration shell of the ion or use inappropriate methodology to calculate the underlying kinetics. A realistic characterization of the involved timescales is imperative to be able to describe a seemingly simple process like the transition from inner-to-outer sphere binding and vice versa. This transition governs most biochemical reactions involving Mg2+ and therefore subsequent processes can only by as fast as the transition itself. However, already the previous step – the exchange of a water from the first hydration shell of the ion – is described my current Mg2+ models up to four orders of magnitude too slowly, which makes the observation of such events on the timescale of a typical simulation difficult or even impossible. Alln ́er et al. [48] as well as Lemkul and MacKerell explicitly considered the exchange rate into their parameter optimization procedure. To compute the rate, both studies applied Transition State Theory along a single reaction coordinate – the distance towards one of the exchanging waters. However, it could be shown that the water exchange from the first hydration shell requires at least the consideration of both exchanging water molecules in order to be able to realistically record the underlying rate using Transition State Theory. Furthermore, the model of Alln ́er et al. significantly underestimates the free energy of solvation of the ion.
(iii) Interactions between Mg2+ and nucleic acids. Typically, ionic force field parame- terization concentrates on the optimization of solution properties. The trans- ferability of these solution optimized parameters towards interactions with biomolecules, however, often fails.
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
Die zellfreie Proteinsynthese hat sich in den letzten Jahren zu einem potenten Werkzeug – auch in der Produktion von Membranproteinen – entwickelt. Da keine lebenden Zellen genutzt werden, kann der Prozess der präparativen Membranproteinproduktion vereinfacht und individuell optimiert werden. Im Gegensatz zu konventionellen zellbasierten Expressionssystemen gewährleistet die zellfreie Proteinsynthese die direkte Zugänglichkeit zum Reaktionsort und damit die Möglichkeit der unmittelbaren Kontrolle. Dies ermöglicht eine genaue Anpassung der Reaktionsbedingungen auf das Zielprotein. Die Verbesserung und Entwicklung neuer Modi der zellfreien Membranproteinsynthese war ein Teil der vorliegenden Arbeit. Setzt man dem Zellfrei-System von Außen keine hydrophobe Umgebung zu, so präzipitiert das neu-synthetisierte Membranprotein im Reaktionsmix (P-CF). Interessanter Weise unterscheiden sich diese Präzipitate von den aus der E.coli zellbasierten Proteinproduktion bekannten Einschlußkörperchen, da sie sich teilweise leicht in mildem Detergenz resolubilisieren lassen. Zudem konnte für verschiedene Transportproteine, die aus Präzpitat resolubilisiert und danach in Liposomen rekonstituiert wurden, spezifische Transportaktivität gezeigt werden (z.B. eukaryotische Ionentransporter, Multi-Drug Resistenzproteine von E.coli). Alternativ können die Membranproteine direkt, durch die Zugabe von Detergenzien in den Reaktionsmix, solubilisiert werden (D-CF). Um die einzelnen Expressionsmodi zu optimieren wurden 24 gebräuchliche Detergenzien auf ihre Eigenschaft hin gestestet, strukturell sehr unterschiedliche Membranproteine zu solubilisieren. Die Familie der langkettigen Polyoxyethylen-alkyl Ether hat sich dabei als sehr geeignet erwiesen um das prokaryotische α-helikale Multi-Drug Resistenzprotein EmrE, den bakteriellen vornehmlich aus ß-sheets bestehenden Transporter Tsx und den eukaryotischen G-Protein gekoppelten Vasopressin Rezeptor V2R direkt im D-CF Modus zu solubilisieren. Zudem konnte eine Abhängigkeit der spezifischen Aktivität von Tsx vom verwendeten Expressionsmodus bzw. des verwendeten Detergenz mit Hilfe der Black Lipid Membrane´ Methode gezeigt werden. Die Expression eines repäsentativen Teils von 134 Zielproteinen des inneren Membranproteoms von E.coli wurde in drei verschiedenen Zellfrei-Expressionsmodi getestet. Ein an jedes Zielprotein des Membranroteoms C-terminal fusioniertes GFP diente der Konzentrationsbestimmung im D-CF Expressionsmodus. Die Faltung von GFP ist in Anwesenheit von Detergenz signifikant reduziert. Zunächst wurden alle Zielproteine in einem batch´ System im D-CF Modus im Mikrotiterplatten Maßstab mit Hilfe eines Roboters hergestellt. Die Etablierung einer robotergestützten Plattform, welche das Pipettieren, Inkubieren und Detektieren kombiniert, diente als Grundlage für den Herstellungsprozess des Membranroteoms von E.coli in einem Medium-Durchsatz Verfahren in batch´ Konfiguration. In dieser ersten Stufe des Screens im D-CF Modus konnten 84 Zielproteine (63%) aufgrund der detektierten GFP-Fluoreszens in Mengen von 1 bis 60μg pro mL Reaktion als erfolgreich produziert identifiziert werden. Zudem wurde das Membranproteom in dem effektiveren continous exchange (CE) Verfahren im P-CF, wie auch im D-CF Modus wiederholt exprimiert. Im Vergleich zur batch´ Konfiguration konnten im CE D-CF Modus deutlich mehr Zielproteine (75%) als positiv identifiziert werden. 16 Zielproteine wurden dabei bereits in Expressionsmengen von mehr als 100μg solubilisierte Membranproteinfusion pro mL Reaktionsmix gewonnen. 99 Zielproteine (74%) konnten als positiv identifiziert werden, nachdem die unlösliche Fraktion der CE P-CF Reaktion elektrophoretisch getrennt und angefärbt wurde. Für 66 Kandidaten (49%) stellt das produzierte Protein nach Coomassie-Färbung eine dominante Bande, und damit (semi-)präparative Proteinmengen, dar. Der Erhalt von Detergenz-solubilisierten Membranproteinproben von hoher Qualität ist ein wichtiger Schritt zur Gewinnung struktureller sowie biochemischer Daten. Das E.coli α-helikale Multi- Drug Resistenz Protein SugE konnte im CE P-CF Verfahren in präparativen Mengen von mehr als 2mg Protein pro mL des Reaktionsansatzes gewonnen werden. Durchgeführte analytische Größenausschlusschromatographie zeigte, dass der Transporter unter optimierten Reaktionsbedingungen in einem homogenen, schlanken Peak eluiert. Mittels elektronenmikroskopischer Gefrierbruchanalysen konnte eine effiziente und homogene Rekonstitution von SugE in E.coli Liposomen gezeigt werden. Bindungsstudien unter der Verwendung fluoreszensbasierter Anisotropie-Messungen haben gezeigt dass Proflavin – im Gegenteil zu Ethidium – ein Substrat von SugE ist. YedZ ist ein 24kDa leucinreiches Membranprotein mit sechs putativen Transmembransegmenten und enthält zwei Kofaktoren, ein Häm b und ein Flavin-mononukleotid (FMN). Im P-CF Modus exprimiertes YedZ kann effizient in den Detergenzien LMPG, LPPG, SDS und DPC resolubilisiert werden. Analytische Größenausschlusschromatographie zeigte einen symmetrischen Elutionspeak der apo-Form. Mittels CD-Spektroskopie des gereinigten apo-YedZ in 0.02% DDM wurde ein α-helikaler Sekundärstrukturanteil von 55% ermittelt. Zur Gewinnung von holo-YedZ wurde anstatt Hämb das chemisch verwandte Hemin eingesetzt. Die aufgenommenen UV/Vis Spektren der zellfrei produzierten holo-YedZ Proteinprobe in ihrer oxydierten und reduzierten Form, zeigen zu einer in vivo exprimierten Vergleichsprobe identische Absorptionsmaxima. Für sechs G-Protein gekoppelten Rezeptoren konnte die zellfreie Expression in präparativen Mengen gezeigt werden. Das Steroid-Derivat Digitonin, sowie einzelne Mitglieder der Detergenzfamilie der langkettigen Polyoxyethylen-alkyl Ether, wurden als am geeignetsten für die lösliche Expression der GPCRs im CE D-CF Verfahren ermittelt. Löslich in Anwesenheit von Brij78 produzierter GPCR Proben, zeigten nach Negativfärbung in elektronenmikroskopischen Einzelpartikelanalysen eine homogene Probenpräparation und geben Hinweis auf eine strukturelle Dimerisierug der Rezeptoren. Detergenzsolubilisierte Rezeptoren konnten in Liposomen, basierend auf E.coli Lipid-Mischungen, rekonstituiert werden. Elektronen-mikroskopische Gefrierbruchanalysen zeigten eine homogene Rekonstitution, welche auf eine funktionelle Faltung der Rezeptoren schließen lässt.