Refine
Year of publication
Document Type
- Part of Periodical (11)
- Article (8)
- Doctoral Thesis (2)
Has Fulltext
- yes (21)
Is part of the Bibliography
- no (21)
Keywords
- SEM (21) (remove)
Institute
Populations of Stegelleta are described from California, New Zealand and Senegal. An amphimictic population from California is identified as belonging to S. incisa and compared with type specimens from Utah and an amphimictic population from Italy. One population from New Zealand is close to S. incisa but considered to represent a new species, Stegelleta laterocornuta sp. nov. It is particularly characterised by a 379–512 μm long body in females and 365–476 μm in males; cuticle divided into 16 rows of blocks at midbody (excluding lateral field); lateral field with four incisures; three pairs of asymmetrical lips, U-shaped primary axils without guarding processes, each lip asymmetrically rectangular with a smooth margin, only lateral lips have slender acute tines; three labial probolae, bifurcated at half of their length; vulva without flap; spermatheca 17–31 μm long; postuterine sac 7–24 μm long; spicules 21.5–23.5 μm long. Other specimens from New Zealand are identified as belonging to S. tuarua. A parthenogenetic population from Senegal is identified as belonging to S. ophioglossa and compared with type specimens from Mongolia and records of several other populations of S. ophioglossa. The generic diagnosis is emended and a key to the species of Stegelleta is provided.
A new species of Paracrobeles, P. kelsodunensis sp. nov. is described from the Kelso Dunes area, Mojave National Preserve, southern California. Paracrobeles kelsodunensis sp. nov. is particularly characterised by a body length of 469–626 μm in females and 463–569 μm in males; lateral field with four incisures, extending almost to tail terminus; three pairs of asymmetrical lips, separated by U-shaped primary axils with two long guarding processes, each lip usually with four tines along its margin; three long labial probolae, deeply bifurcated, with slender prongs without tines; metastegostom with a strong anteriorly directed dorsal tooth; pharyngeal corpus anteriorly spindle-shaped, posteriorly elongate bulbous with dilated lumen; spermatheca 24–87 μm long; postvulval uterine sac 60–133 μm long; vulva in a sunken area; spicules 33–38 μm long; and male tail with a 5–8 μm long mucro. The generic diagnosis is emended on the basis of recently described species and a key to the species of Paracrobeles is provided.
We provide the current holdings of Meropeidae in the Florida State Collection of Arthropods (FSCA). To date, FSCA holds a well-curated collection of extant meropeids representing 17 U.S. states and Western Australia (n = 316 Merope tuber Newman, fi ve Austromerope poultoni Killington). Merope tuber records from Vermont, Texas, and South Carolina are published here for the fi rst time. A total of 298 pinned M. tuber and four pinned
A. poultoni; six M. tuber specimens preserved in 95% ethanol; and 12 M. tuber and one A. poultoni sputter-coated with gold-palladium for SEM are available for researchers interested in studying this unique family of insects.
Techniques for collecting, handling, preparing, storing and examining small molluscan specimens
(2007)
Micromolluscs are small-sized molluscs (< 5 mm), and include the great majority of undescribed molluscan taxa. Such species require special collecting, sorting and handling techniques and different storage requirements to those routinely used for larger specimens. Similarly, the preparation of shells, opercula, radulae and animals poses some challenges for scanning electron microscopy (SEM). An overview of experiences with various techniques is presented, both positive and negative. Issues discussed include those relating to storage of dry specimens and interaction of specimens with glass, gelatine and paper products, handling techniques and storage in various fluids. Techniques for cleaning shells for SEM are described and compared, as well as those for radular extraction. The interactions of chemicals used for the dissolution of tissue with calcareous micromolluscs are described. Methods for handling and mounting small radulae for SEM are detailed and brief guides to SEM and light photography are given. An appendix listing details of frequently-used chemicals is provided.
Eight species of Diplopeltoides are described from the Swedish west coast. Diplopeltoides suecicus sp. nov. has the cuticle with longitudinal striation visible only under SEM; cuticular plate underlying the cephalic cuticle around the amphid present; cephalic sensilla 4–6 μm long; amphid an inverted U-shape; wide space between amphidial branches areolated; spicules 27–31 μm long; gubernaculum with caudal apophysis. Diplopeltoides longicaudatus sp. nov. is characterized by a cuticle without longitudinal striation; cuticular plate underlying cephalic cuticle around amphid present; cephalic sensilla 13 μm long; amphid an inverted U-shape; narrow space between amphidial branches not ornamented; spicules unequal in size, 27–31 μm long; gubernaculum absent; midventral precloacal cuticular ridge present. D. grandis sp. nov. is characterized by a cuticle with longitudinal striation; cuticular plate underlying cephalic cuticle around amphid present; cephalic sensilla 18.5 μm long; amphid an inverted U-shape; wide space between amphidial branches punctate. The following taxonomic changes are proposed: Diplopeltoides asetosus (Juario, 1974) comb. nov., Diplopeltoides botulus (Wieser, 1959) comb. nov., Diplopeltoides bulbosus (Vitiello, 1972) comb. nov., Diplopeltoides lucanicus (Boucher & Helléouët, 1977) comb. nov., Diplopeltoides pumilus (Vincx & Gourbault, 1992) comb. nov. and Diplopeltoides striatus (Gerlach, 1956) comb. nov. Diplopeltoides holovachovi Fadeeva & Mordukhovich, 2013 is synonymised with Diplopeltoides pumilus comb. nov. An updated key to the species of Diplopeltoides is provided.
The new genus Neodiplopeltula gen. nov. is proposed to accommodate those species from the genus Diplopeltula Gerlach, 1950 that possess the following morphological characters: amphids in the shape of an elongated loop, a well-developed subcylindrical stoma and outstretched ovaries. The genus Diplopeltula is considered genus inquirendum et incertae sedis. Four species placed in Neodiplopeltula gen. nov. are redescribed. The following taxonomic changes are proposed: Neodiplopeltula asymmetrica (Allgén, 1935) gen. et comb. nov.; Neodiplopeltula barentsi (Steiner, 1916) gen. et comb. nov.; Neodiplopeltula bathmanni (Jensen, 1991) gen. et comb. nov.; Neodiplopeltula cuspidiboja (Leduc, 2017) gen. et comb. nov.; Neodiplopeltula indica (Gerlach, 1962) gen. et comb. nov.; Neodiplopeltula intermedia (Gerlach, 1954) gen. et comb. nov.; Neodiplopeltula obesa (Nguyen Vu Thahn, Nguyen Thahn Hien & Gagarin, 2012) gen. et comb. nov.; Neodiplopeltula onusta (Wieser, 1956) gen. et comb. nov.; Neodiplopeltula ovalis (Ditlevsen, 1928) gen. et comb. nov. and Neodiplopeltula tchesunovi (Fadeeva & Mordukhovich, 2013) gen. et comb. nov. New synonyms include: Diplopeltis asymmetricus Allgén, 1935 and Diplopeltis ovalis Ditlevsen, 1928 are synonimised with Neodiplopeltula barentsi (Steiner, 1916) gen. et comb. nov.; Diplopeltula tchesunovi Fadeeva & Mordukhovich, 2013 is synonimised with Neodiplopeltula onusta (Wieser, 1956) gen. et comb. nov.; the male of Diplopeltula cuspidiboja Leduc, 2017 is synonimised with Neodiplopeltula barentsi gen. et comb. nov. and the female with N. bathmanni gen. et comb. nov. A key to the species of Neodiplopeltula gen. nov. is provided.
Die vorliegende Arbeit befasst sich mit der übergeordneten Frage nach dem Einfluss der Multikollinearität bei der Spezifikation und Schätzung von latenten nichtlinearen Effekten in Strukturgleichungsmodellen. Da das Multikollinearitätsproblem in latenten nicht-linearen Strukturgleichungsmodellen bisher in der Literatur kaum Beachtung gefunden hat, wird als erstes die Frage beantwortet, welche Relevanz das Vorliegen von Multikollinearität in nichtlinearen Strukturgleichungsmodellen hat. Dabei wird aufgezeigt, dass Multikollinearität von Prädiktoren nicht nur bei linearen Strukturgleichungsmodellen ein Problem darstellt, sondern vor allem bei nicht-linearen Strukturgleichungsmodellen aufgrund des Vorhandenseins nicht-linearer Terme. Da nicht-lineare Terme untereinander in einem höheren Zusammenhang stehen können als lineare Terme eines Strukturmodells, kann es zu Scheineffekten und zu verzerrten Schätzungen der nichtlinearen Effekte kommen. Ein Teststärkeverlust tritt immer ein. Als zweites wird gezeigt, dass die am stärksten vertretene Ansatzklasse zur simultanen Schätzung von Interaktionseffekten und quadratischen Effekten, nämlich die Klasse der Produkt-Indikator-Ansätze, seit ihrer Erstpublikation durch Kenny und Judd (1984) Spezifikationsfehler aufweist, welche in ähnlicher Form auch in jüngeren Publikationen enthalten sind (z.B. bei Lee, Song & Poon, 2004). Spezifikationsfehler machen die ganze Ansatzklasse für Multikollinearität „anfällig“, so dass es theoretisch zu verzerrten Schätzungen oder Scheineffekten kommen muss. Es wird gezeigt, wie man die Spezifikationsfehler korrigieren kann, d.h. wie man die bestehenden Ansätze erweitern muss. Da die latente Prädiktorkorrelation Bestandteil der Spezifikationsfehler ist, stellt sich die Frage, wie groß die Verzerrungen sind, die sich bei der Anwendung der (unkorrigierten) Produkt-Indikator-Ansätze ergeben, wenn die Multikollinearität steigt. Um diese Frage zu beantworten, wird eine Simulationsstudie durchgeführt. Sie zeigt, dass der Zwei-Stufen-Ansatz von Ping (1996) verzerrte Schätzungen der nicht-linearen Effekte produziert. Dieser Ansatz ist ein Vertreter der Produkt-Indikator-Ansätze und enthält die besagten Spezifikationsfehler. In der Simulationsstudie wird außerdem gezeigt, dass die korrekte Erweiterung des Ansatzes von Jöreskog und Yang (1996) zu erwartungstreuen Schätzungen führt. Als drittes wird der Frage nachgegangen werden, welche theoretischen und empirischen Unterschiede zwischen den neuen verteilungsanalytischen Ansätzen LMS (Klein & Moosbrugger, 2000) und QML (Klein & Muthén, 2007), einerseits, und den klassischen Produkt-Indikator-Ansätzen, andererseits, zu erwarten sind. Dazu werden die theoretischen Eigenschaften der verteilungsanalytischen Verfahren, LMS und QML, untereinander und mit der Klasse der Produkt-Indikator-Ansätze verglichen. Ihre theoretischen Eigenschaften werden beim Vorliegen von Multikollinearität betrachtet. Illustriert werden die theoretischen Unterschiede anhand einer Simulationsstudie, die die Ansätze hinsichtlich ihrer Schätzeigenschaften bei steigender Multikollinearität miteinander vergleicht. In der Simulationsstudie werden die theoretisch herausgearbeiteten Vorteile der verteilungsanalytischen Verfahren, LMS und QML, bestätigt. In der Zusammenschau der theoretischen Überlegungen und der Ergebnisse aus den Simulationsstudien zeigt sich, dass Multikollinearität für alle Ansätze zur simultanen Schätzung multipler nicht-linearer Effekte eine Herausforderung ist. Die forschungspraktische und inhaltliche Relevanz des Multikollinearitätsproblems wird anhand eines Beispiels veranschaulicht. Für in jüngster Zeit diskutierte komplexere Modelle (z.B. moderierte Mediatormodelle) wird Multikollinearität ein Kernproblem sein, dem sich alle Ansätze werden stellen müssen oder für das neue Ansätze entwickelt werden müssen.
Die vorliegende Arbeit befasst sich mit der übergeordneten Frage nach dem Einfluss der Multikollinearität bei der Spezifikation und Schätzung von latenten nichtlinearen Effekten in Strukturgleichungsmodellen. Da das Multikollinearitätsproblem in latenten nicht-linearen Strukturgleichungsmodellen bisher in der Literatur kaum Beachtung gefunden hat, wird als erstes die Frage beantwortet, welche Relevanz das Vorliegen von Multikollinearität in nichtlinearen Strukturgleichungsmodellen hat. Dabei wird aufgezeigt, dass Multikollinearität von Prädiktoren nicht nur bei linearen Strukturgleichungsmodellen ein Problem darstellt, sondern vor allem bei nicht-linearen Strukturgleichungsmodellen aufgrund des Vorhandenseins nicht-linearer Terme. Da nicht-lineare Terme untereinander in einem höheren Zusammenhang stehen können als lineare Terme eines Strukturmodells, kann es zu Scheineffekten und zu verzerrten Schätzungen der nichtlinearen Effekte kommen. Ein Teststärkeverlust tritt immer ein. Als zweites wird gezeigt, dass die am stärksten vertretene Ansatzklasse zur simultanen Schätzung von Interaktionseffekten und quadratischen Effekten, nämlich die Klasse der Produkt-Indikator-Ansätze, seit ihrer Erstpublikation durch Kenny und Judd (1984) Spezifikationsfehler aufweist, welche in ähnlicher Form auch in jüngeren Publikationen enthalten sind (z.B. bei Lee, Song & Poon, 2004). Spezifikationsfehler machen die ganze Ansatzklasse für Multikollinearität „anfällig“, so dass es theoretisch zu verzerrten Schätzungen oder Scheineffekten kommen muss. Es wird gezeigt, wie man die Spezifikationsfehler korrigieren kann, d.h. wie man die bestehenden Ansätze erweitern muss. Da die latente Prädiktorkorrelation Bestandteil der Spezifikationsfehler ist, stellt sich die Frage, wie groß die Verzerrungen sind, die sich bei der Anwendung der (unkorrigierten) Produkt-Indikator-Ansätze ergeben, wenn die Multikollinearität steigt. Um diese Frage zu beantworten, wird eine Simulationsstudie durchgeführt. Sie zeigt, dass der Zwei-Stufen-Ansatz von Ping (1996) verzerrte Schätzungen der nicht-linearen Effekte produziert. Dieser Ansatz ist ein Vertreter der Produkt-Indikator-Ansätze und enthält die besagten Spezifikationsfehler. In der Simulationsstudie wird außerdem gezeigt, dass die korrekte Erweiterung des Ansatzes von Jöreskog und Yang (1996) zu erwartungstreuen Schätzungen führt. Als drittes wird der Frage nachgegangen werden, welche theoretischen und empirischen Unterschiede zwischen den neuen verteilungsanalytischen Ansätzen LMS (Klein & Moosbrugger, 2000) und QML (Klein & Muthén, 2007), einerseits, und den klassischen Produkt-Indikator-Ansätzen, andererseits, zu erwarten sind. Dazu werden die theoretischen Eigenschaften der verteilungsanalytischen Verfahren, LMS und QML, untereinander und mit der Klasse der Produkt-Indikator-Ansätze verglichen. Ihre theoretischen Eigenschaften werden beim Vorliegen von Multikollinearität betrachtet. Illustriert werden die theoretischen Unterschiede anhand einer Simulationsstudie, die die Ansätze hinsichtlich ihrer Schätzeigenschaften bei steigender Multikollinearität miteinander vergleicht. In der Simulationsstudie werden die theoretisch herausgearbeiteten Vorteile der verteilungsanalytischen Verfahren, LMS und QML, bestätigt. In der Zusammenschau der theoretischen Überlegungen und der Ergebnisse aus den Simulationsstudien zeigt sich, dass Multikollinearität für alle Ansätze zur simultanen Schätzung multipler nicht-linearer Effekte eine Herausforderung ist. Die forschungspraktische und inhaltliche Relevanz des Multikollinearitätsproblems wird anhand eines Beispiels veranschaulicht. Für in jüngster Zeit diskutierte komplexere Modelle (z.B. moderierte Mediatormodelle) wird Multikollinearität ein Kernproblem sein, dem sich alle Ansätze werden stellen müssen oder für das neue Ansätze entwickelt werden müssen.
Necropsies of Baltic grey (Halichoerus grypus) and ringed seals (Pusa hispida) presented a rare opportunity to study their acanthocephalan fauna. Both species hosted adults of three species of the genus Corynosoma Lühe, 1904, namely C. magdaleni Montreuil, 1958, C. semerme (Forsell, 1904) Lühe 1911 and C. strumosum (Rudolphi, 1802) Lühe 1904. A comparative morphological analysis of these three species of Corynosoma, combining both light and scanning electron microscopy, was performed for the first time. Sexual dimorphism in the size and shape of the trunk was observed in both C. magdaleni and C. semerme, but there was insufficient material to investigate this phenomenon in C. strumosum. Genital spines were not observed in any of the female acanthocephalans. Three possible explanations for the presence of genital spines in some females, but not others are (i) cryptic speciation, (ii) phenotypic variation and (iii) loss by extraction or shearing when the copulatory cap is released. Copulatory caps were observed on female C. semerme. The size and morphology showed considerable variability and all caps were strongly autofluoresecent.
Three new species of the genus Pelodera Schneider, 1866 viz., P. indica sp. nov., P. adeeli sp. nov. and P. paratretzeli sp. nov. collected from dung beetles and P. cylindrica (Cobb, 1898) collected from soil samples, are described and illustrated. Pelodera indica sp. nov. is characterised by sexual dimorphism in anterior region, cupola-shaped tail with a spike; males having punctated, striated and lobed bursa with no genital papillae originating anterior to cloaca. Pelodera adeeli sp. nov. is characterised by coarsely annulated cuticle; relatively narrow stoma; tail conoid without spike; males with punctated, lobed bursa and nine pairs of genital papillae arranged in a 2/1+2+P+3+1 configuration. Pelodera paratretzeli sp. nov. is characterised by sexual dimorphism in anterior region, stoma wide with three well-developed metastegostomal denticles; tail cupola-shaped with a long spike; males having spicules fused distally up to 12–14% of spicule length; bursa peloderan, anteriorly closed and punctated with nine pairs of genital papillae arranged in a 3/2+P+3+1 configuration. Pelodera cylindrica is described with additional details. The comparative analysis as well as phylogenetic relationship of the species belonging to the coarctata group have been elaborated by incorporating scanning electron microscopic observations. Information on the biogeographical distribution has also been provided.