Refine
Year of publication
- 2022 (41) (remove)
Document Type
- Article (26)
- Doctoral Thesis (11)
- Book (3)
- Working Paper (1)
Language
- English (35)
- German (5)
- Multiple languages (1)
Has Fulltext
- yes (41)
Is part of the Bibliography
- no (41) (remove)
Keywords
- precipitation (3)
- oceanic islands (2)
- Altenberg–Teplice Volcanic Complex (1)
- Anthropology (1)
- Arc discharges (1)
- Archaeology (1)
- Atmospheric chemistry (1)
- Atmospheric science (1)
- Biogeochemistry (1)
- Biogeography (1)
Institute
- Geowissenschaften / Geographie (41) (remove)
We performed an experiment under long-term microgravity conditions aboard the International Space Station (ISS) to obtain information on the energetics and experimental constraints required for the formation of chondrules in the solar nebula by ’nebular lightning’. As a simplified model system, we exposed porous forsterite (Mg2 SiO4) dust particles to high-energetic arc discharges. The characterization of the samples after their return by synchrotron microtomography and scanning electron microscopy revealed that aggregates had formed, consisting of several fused Mg2SiO4 particles. The partial melting and fusing of Mg2SiO4 dust particles under microgravity conditions leads to a strong reduction of their porosity. The experimental outcomes vary strongly in their appearance from small spherical melt-droplets (∅≈90 µm) to bigger and irregularly shaped aggregates (∅≈350 µm). Our results provided new constraints with respect to energetic aspects of chondrule formation and a roadmap for future and more complex experiments on Earth and in microgravity conditions.
Ob Klimawandel oder Luftverschmutzung: Die chemischen und physikalischen Prozesse in der Atmosphäre haben wichtige Auswirkungen auf die menschliche Gesundheit und Ökosysteme. Dabei ist die Atmosphäre mehr als ein Gemisch aus Stickstoff, Sauerstoff, Wasserdampf, Helium und Kohlenstoffdioxid. Es gibt zahlreiche Spurengase, deren Gesamtanteil am Volumen weniger als 1 % ausmacht. In dieser Arbeit werden Stickstoffoxide, Schwefeldioxid, Kohlenstoffmonoxid und Schwefelsäure näher betrachtet, die im Rahmen der flugzeugbasierten Messkampagne Chemistry of the Atmosphere: field experiment in Europe (CAFE-EU)/BLUESKY gemessen wurden.
Die Stickstoffoxide NO und NO2, als NOx zusammengefasst, besitzen hauptsächlich anthropogene Quellen, allen voran fossile Verbrennung und industrielle Prozesse. Zwischen NO und NO2 besteht ein photochemisches Gleichgewicht, sodass in der Atmosphäre vor allem NO2 in relevanten Konzentrationen vorkommt; dies wirkt aufgrund der Bildung von Salpetersäure, HNO3, in wässriger Lösung beim Einatmen ätzend und ist entsprechend gesundheitsschädlich. Troposphärisches Ozon, O3, wesentlicher Bestandteil von Sommersmog, wird hauptsächlich durch die Reaktion von NO mit Peroxiden (HO2 und RO2) gebildet. In der Stratosphäre entstehen NOx hauptsächlich durch die Photodissoziation von Lachgas, N2O, das aufgrund seiner langen Lebenszeit von der Tropo- in die Stratosphäre transportiert werden kann und dort die wichtigste Stickstoffquelle darstellt. In der Stratosphäre tragen NOx zum katalytischen Abbaumechanismus des Ozons bei (Bliefert, 2002; Seinfeld and Pandis, 2016).
Schwefeldioxid, SO2, ist ein toxisches Gas, dessen atmosphärische Quellen hauptsächlich anthropogen sind, nämlich fossile Verbrennung und industrielle Prozesse; Senken sind trockene und feuchte Deposition, wobei letztere zu saurem Regen führen kann. Seit den 1980ern sinken die globalen SO2-Emissionen. SO2 kann in der Atmosphäre zu Sulfat und Schwefelsäure oxidiert werden, was Hauptbestandteil des Wintersmogs ist. Der wichtigste Mechanismus ist die Oxidation mit dem Hydroxylradikal, OH˙, unter Beteiligung von Wasserdampf. In der Stratosphäre ist Carbonylsulfid, OCS, die wichtigste Schwefelquelle, da es analog zum N2O dank seiner langen Lebenszeit von der Tropo- in die Stratosphäre transportiert werden kann (Bliefert, 2002; Seinfeld und Pandis, 2016). Typische Konzentrationen von Schwefelsäure sind 105 cm–3 nachts und 107 cm–3 tagsüber in der Troposphäre sowie 105 cm–3 tagsüber in der Stratosphäre (Clarke et al., 1999; Weber et al., 1999; Fiedler et al., 2005; Arnold, 2008; Kürten et al., 2016; Berresheim et al., 2000).
Kohlenstoffmonoxid, CO, ist ein toxisches Gas, das zu gleichen Teilen durch direkte Emissionen (v.a. Biomasseverbrennung und fossile Verbrennung) und In-situ-Oxidation (v.a. von Methan, Isopren und industriellen Kohlenwasserstoffen) in die Atmosphäre gelangt. Die Hauptsenke ist die Reaktion mit OH˙ in der Troposphäre. Seit 2000 sinkt die globale CO-Konzentration (Bliefert, 2002).
Doch neben Gasen sind auch Aerosolpartikel fester Bestandteil des Gemisches Luft, welche luftgetragene feste oder flüssige Teilchen sind. Primäre Aerosolpartikel werden direkt als solche in die Atmosphäre emittiert, während sekundäre Aerosolpartikel in der Atmosphäre gebildet werden, indem gasförmige Vorläufersubstanzen mit geringer Flüchtigkeit auf primären Partikeln kondensieren oder durch Zusammenclustern und Anwachsen komplett neue Partikel bilden. Aerosolpartikel ermöglichen als Wolkenkondensationskeime erst die Bildung von Wolken und wirken somit – neben ihrem direkten reflektierenden Effekt – durch Änderung der Wolkenbedeckung und -eigenschaften insgesamt kühlend aufs Klima und beeinflussen die lokalen und globalen Wasserkreisläufe. Doch sie haben auch negative Auswirkungen auf die menschliche Gesundheit und sind für eine Verkürzung der durchschnittlichen Lebensdauer in Regionen mit hohen Feinstaubbelastungen verantwortlich (Seinfeld und Pandis, 2016; Bellouin et al., 2020; World Health Organization, 2016).
Neben den bisher betrachteten neutralen, also ungeladenen Gasen und Partikeln sind Ionen in der Gasphase sowie geladene Partikel ebenfalls Bestandteil der Atmosphäre. Sie spielen bei vielen atmosphärischen Prozessen eine wichtige Rolle, wie etwa bei Gewittern, Radiowellenübertragung und ionen-induzierter Nukleation von Aerosolpartikeln. Die Hauptquellen für Ionisation in der Tropo- und Stratosphäre ist die galaktische kosmische Strahlung, die entgegen ihrem Namen hauptsächlich aus Protonen und α-Partikeln (primäre Partikel genannt) besteht und in der Erdatmosphäre durch Kollision mit Luftmolekülen Teilchenschauer von sekundären Partikeln (u.a. Myonen, Pionen und Neutrinos) hervorruft. Die primären und sekundären Partikel können die Luftmoleküle ionisieren unter Entstehung von N+, N2+, O+, O2+ und Elektronen. Sauerstoff reagiert rasch mit letzteren zu O– und O2–. Diese Kationen und Anionen reagieren weiter, bis Ionenclustern der Summenformeln (HNO3)n(H2O)mNO3– und H+(H2O)n(B)m gebildet werden, wobei B Basen wie Methanol, Aceton, Ammoniak oder Pyridin sind. Weitere Ionisationsquellen sind der Zerfall des Radioisotops 222Rn in Bodennähe und ionisierende Solarstrahlung oberhalb der Stratosphäre. Atmosphärische Ionen haben zwei wichtige Senken: die Wiedervereinigung, auch Rekombination genannt, bei der sich ein Kation und ein Anion gegenseitig neutralisieren sowie das Anhaften an Aerosolpartikeln. Letztere Senke ist vor allem in der Troposphäre aufgrund der relativ hohen Konzentration an Aerosolpartikeln relevant (Arnold, 2008; Viggiano und Arnold, 1995; Bazilevskaya et al., 2008; Hirsikko et al., 2011).
Atmospheric particles play an important role in the radiative balance of the Earth, as well as they affect human health and air quality. Hence, the chemical characterization constitutes a crucial task to determinate their properties, sources and fate. Particularly, the analysis of nanoparticles (d<100 nm) represents an analytical challenge, since these particles are abundant in number but have very little mass.
This accumulative thesis focuses on the chemical characterization of nanoparticles, performed in both laboratory and field studies. Here, I present four manuscripts, two of which are my main project as a lead author.
The first manuscript (Caudillo et al., 2021) focuses on the gas and the particle phase originated from biogenic precursor gases (α-pinene and isoprene). The experiments were performed in the CLOUD chamber at CERN to simulate pure biogenic new particle formation. Both gas and particle phases are measured with a nitrate CI-APi-TOF mass spectrometer, while the TD-DMA is coupled to it for particle-phase measurements, this setup allows a direct comparison as both measurements use the identical chemical ionization and detector. This study demonstrates the suitability of the TD-DMA for measuring newly formed nanoparticles and it confirms that isoprene suppresses new particle formation but contributes to the growth of newly formed particles.
The second manuscript (Caudillo et al., 2022) presents an intercomparison of four different techniques (including the TD-DMA) for measuring the chemical composition of SOA nanoparticles. The measurements were conducted in the CLOUD chamber. The intercomparison was done by contrasting the observed chemical composition, the calculated volatility, and the thermal desorption behavior (for the thermal desorption techniques). The methods generally agreed on the most important compounds that are found in the nanoparticles. However, they did see different parts of the organic spectrum. Potential explanations for these differences are suggested.
The third manuscript (Ungeheuer al., 2022) presents both laboratory and ambient measurements to investigate the ability of lubricant oil to form new particles. These new particles are an important source of ultrafine particles in the areas nearby large airports. The ambient measurements were performed downwind of Frankfurt International Airport, and it was found that the fraction of lubricant oil is largest in the smallest particles. In the laboratory, the main finding was that evaporated lubricant oil nucleates and forms new particles rapidly. The results suggest that nucleation of lubricant oil and subsequent particle growth can occur in the cooling exhaust plumes of aircraft-turbofans.
The fourth manuscript (Wang et al., 2022) is a new particle formation study in the CLOUD chamber at CERN. This study shows that nitric acid, sulfuric acid, and ammonia interact synergistically and rapidly form particles under upper free tropospheric conditions. These particles can grow by condensation (driven by the availability of ammonia) up to CCN sizes and INP particles. The ability of these particles to act as a CCN and INP was also investigated and it was found to be as efficient as for desert dust. This mechanism constitutes an important finding and it can account for previous observations of high concentrations of ammonia and ammonium nitrate over the Asia monsoon region.
Climatic and biogeographical drivers of functional diversity in the flora of the Canary Islands
(2022)
Aim: Functional traits can help us to elucidate biogeographical and ecological processes driving assemblage structure. We analysed the functional diversity of plant species of different evolutionary origins across an island archipelago, along environmental gradients and across geological age, to assess functional aspects of island biogeographical theory.
Location: Canary Islands, Spain.
Major taxa studied: Spermatophytes.
Time period: Present day.
Methods: We collected data for four traits (plant height, leaf length, flower length and fruit length) associated with resource acquisition, competitive ability, reproduction and dispersal ability of 893 endemic, non-endemic native and alien plant species (c. 43% of the Canary Island flora) from the literature. Linking these traits to species occurrences and composition across a 500 m × 500 m grid, we calculated functional diversity for endemic, non-endemic native and alien assemblages using multidimensional functional hypervolumes and related the resulting patterns to climatic (humidity) and island biogeographical (geographical isolation, topographic complexity and geological age) gradients.
Results: Trait space of endemic and non-endemic native species overlapped considerably, and alien species added novel trait combinations, expanding the overall functional space of the Canary Islands. We found that functional diversity of endemic plant assemblages was highest in geographically isolated and humid grid cells. Functional diversity of non-endemic native assemblages was highest in less isolated and humid grid cells. In contrast, functional diversity of alien assemblages was highest in arid ecosystems. Topographic complexity and geological age had only a subordinate effect on functional diversity across floristic groups.
Main conclusions: We found that endemic and non-endemic native island species possess similar traits, whereas alien species tend to expand functional space in ecosystems where they have been introduced. The spatial distribution of the functional diversity of floristic groups is very distinct across environmental gradients, indicating that species assemblages of different evolutionary origins thrive functionally in dissimilar habitats.
Africa's protected areas (PAs) are the last stronghold of the continent's unique biodiversity, but they appear increasingly threatened by climate change, substantial human population growth, and land-use change. Conservation planning is challenged by uncertainty about how strongly and where these drivers will interact over the next few decades. We investigated the combined future impacts of climate-driven vegetation changes inside African PAs and human population densities and land use in their surroundings for 2 scenarios until the end of the 21st century. We used the following 2 combinations of the shared socioeconomic pathways (SSPs) and representative greenhouse gas concentration pathways (RCPs): the “middle-of-the-road” scenario SSP2–RCP4.5 and the resource-intensive “fossil-fueled development” scenario SSP5–RCP8.5. Climate change impacts on tree cover and biome type (i.e., desert, grassland, savanna, and forest) were simulated with the adaptive dynamic global vegetation model (aDGVM). Under both scenarios, most PAs were adversely affected by at least 1 of the drivers, but the co-occurrence of drivers was largely region and scenario specific. The aDGVM projections suggest considerable climate-driven tree cover increases in PAs in today's grasslands and savannas. For PAs in West Africa, the analyses revealed climate-driven vegetation changes combined with hotspots of high future population and land-use pressure. Except for many PAs in North Africa, future decreases in population and land-use pressures were rare. At the continental scale, SSP5–RCP8.5 led to higher climate-driven changes in tree cover and higher land-use pressure, whereas SSP2–RCP4.5 was characterized by higher future population pressure. Both SSP–RCP scenarios implied increasing challenges for conserving Africa's biodiversity in PAs. Our findings underline the importance of developing and implementing region-specific conservation responses. Strong mitigation of future climate change and equitable development scenarios would reduce ecosystem impacts and sustain the effectiveness of conservation in Africa.
Convective rain cell properties and the resulting precipitation scaling in a warm-temperate climate
(2022)
Convective precipitation events have been shown to intensify at rates exceeding the Clausius–Clapeyron rate (CC rate) of ca. 7% K−1 under current climate conditions. In this study, we relate atmospheric variables (low-level dew point temperature, convective available potential energy, and vertical wind shear), which are regarded as ingredients for severe deep convection, to properties of convective rain cells (cell area, maximum precipitation intensity, lifetime, precipitation sum, and cell speed). The rain cell properties are obtained from a rain gauge-adjusted radar dataset in a mid-latitude region, which is characterized by a temperate climate with warm summers (Germany). Different Lagrangian cell properties scale with dew point temperature at varying rates. While the maximum precipitation intensity of cells scales consistently at the CC rate, the area and precipitation sum per cell scale at varying rates above the CC rate. We show that this super-CC scaling is caused by a covarying increase of convective available potential energy with dew point temperature. Wind shear increases the precipitation sum per cell mainly by increasing the spatial cell extent. From a Eulerian point of view, this increase is partly compensated by a higher cell velocity, which leads to Eulerian precipitation scaling rates close to and slightly above the CC rate. Thus, Eulerian scaling rates of convective precipitation are modulated by convective available potential energy and vertical wind shear, making it unlikely that present scaling rates can be applied to future climate conditions. Furthermore, we show that cells that cause heavy precipitation at fixed locations occur at low vertical wind shear and, thus, move relatively slowly compared to typical cells.
As part of two drilling campaigns of the International Continental Scientific Drilling Program (ICDP), several geophysical borehole measurements were carried out by the Leibniz Institute for Applied Geophysics (LIAG) in two lakes. The acquired data was used to answer stratigraphic and paleoclimatic research questions, including the establishment of robust age-depth models and the construction of continuous lithological profiles.
Lake Towuti is located on Sulawesi (Indonesia), within the "Indo-Pacific Warm Pool" (IPWP), a globally important region for atmospheric heat and moisture budgets. The lake exists for approximately one million years, but its exact age is uncertain. We present the first agedepth model for the approximately 100 m continuous sediment sequence from the central part of the lake. The basis for this model is the magnetic susceptibility measured in the borehole and a tephra layer with an age of about 797 ka at 72 m depth. Our age-depth model is inferred from cyclostratigraphic analysis of borehole data and covers a period from 903 ± 11 to 131 ± 67 ka. We suggest that orbital eccentricity and/or changes between global cold and warm periods are responsible for hydroclimatic changes in the IPWP, that these changes affect sedimentation processes in Lake Towuti, and that we can measure and observe this effect in the sediment properties today. Additionally, we created a continuous artificial lithological profile from a series of different borehole data using cluster analysis. This provides information from parts of the borehole where no sediment is available due to core loss.
Lake Ohrid is 1.36 million years old and is located on the Balkan Peninsula on the border between Albania and North Macedonia. The primary hole 'DEEP' in the central part of the lake has been the subject of several investigations, but information about sediments of the marginal locations 'Pestani' and 'Cerava' have not been published yet. In our study, we use natural gamma radiation (GR) measured in the borehole to generate an age-depth model for DEEP. This is performed using the correlation of GR to the global LR04 reference record of Lisiecki and Raymo (2005).
The age information is then transferred via prominent seismic marker horizons to the other two sites, Pestani and Cerava, where it provides the first age-control points for the construction of age-depth models from correlation of GR to LR04. The generated age-depth models are tested using cyclostratigraphic methods, but the limits of this approach are revealed. At DEEP, sedimentation rates (SR) from the cyclostratigraphic method and the correlative approach differ by 2.8 %, at Pestani this difference is 16.7 %, and at Cerava the quality of the data does not allow a reliable evaluation of SR using the cyclostratigraphic approach. We used cluster analysis to construct artificial lithological profiles at all three sites and integrated them into the respective age-depth models. This enables us to determine which sediment types were deposited at what time, and we recognize the change between warm and cold periods in the sediment properties at all three locations. The analyses in this study were all performed on borehole and seismic data and thus do not involve sediment core data. Especially at Pestani and Cerava, new insights into the sedimentological history of Lake Ohrid could be obtained.
In the last part we discuss the occurrence of the half-precession (HP) signal in the European region during the last one million years. The focus is on Lake Ohrid, but a range of other proxies, from the eastern Mediterranean, across the European continent, up to Greenland are analyzed in regards to HP. Applying filters, we focus on the frequency range with a period of 13-8.5 ka and only HP remains in the records. We use correlative methods to determine the clarity of the HP signal in proxies distributed across the European realm. Additionally, we determined the development of HP over time. The HP signal is clearest in the southeast and decreases toward the north. It is further more pronounced in interglacial periods and in the younger part (<621 ka) of most proxies. We suggest that there are mechanisms that transmit the HP signal from its origin near the equator to higher latitudes via different processes. In this context, for instance, the African monsoon, the Nile River and the Mediterranean outflow via the Strait of Gibraltar can be important factors.
The Yacoraite Formation (Salta rift, Argentina) consists of Maastrichtian–Danian lacustrine carbonate and siliciclastic deposits with interbedded volcanic ash layers, organized in four third-order stratigraphic sequences. It offers the exceptional opportunity to jointly apply in situ zircon and carbonate U-Pb geochronology that resulted in two distinct depositional age depth models. Ages of the youngest zircon population from ash layers were linearly interpolated to derive a zircon depositional age depth model. A carbonate depositional age depth model was instead obtained from dated carbonate phases including microbialites, ooids, oncoids of calcitic and dolomitic mineralogy as well as early lacustrine calcite cements. Mean ages were defined from different carbonate phases belonging to the same layer and then linearly interpolated. Sedimentation rates were calculated from both depth models between pairs of dated samples and used to estimate the age of sequence boundaries, as well as the duration of the four stratigraphic sequences. The zircon and carbonate depositional age depth models agree with biostratigraphic constraints and exhibit excellent consistency. The onset and end of sedimentation were estimated at 68.2 ± 0.9 Ma and 62.3 ± 0.6 Ma (duration ca 5.7 Ma) via zircon geochronology and at 67.9 ± 1.7 Ma and 61.9 ± 1.3 Ma (duration ca 6.0 Ma) via carbonate geochronology. Results from this study show that with suitable samples and a newly implemented working strategy, in situ U-Pb dating of depositional and early diagenetic carbonates represent a valuable chronostratigraphic tool for estimating sedimentation rate and duration in poorly time-framed depositional systems.
Carbon is an element that controls planetary habitability, and is fundamental for life on Earth. Its behaviour has important consequences for the global climate system, the origin and evolution of life on Earth. While the biosphere and atmosphere’s carbon cycle only accounts for less than 1% of the global carbon budget, hidden reservoirs of deep carbon in the Earth’s interior comprise the predominant storage of carbon on the planet. At the Earth’s surface, 60-70 % of carbon is hosted by carbonate minerals, which are then transported to the Earth’s interior, mainly in the form of sediments, by subduction of the oceanic lithosphere. Subducting plates are subjected to decarbonation, dehydration, and melting with CO2 release via supra-subduction volcanism. Nevertheless, part of the subducted carbonates’ may survive and be further transported to the deep mantle. Direct evidence of the existence of carbonates in the Earth’s interior, possibly reaching down to the lower mantle, comes from the finding of syngenetic inclusions of carbonates in diamonds and mantle xenoliths. The presence of carbonates in the deep Earth has a critical effect on the physical properties of the mantle. Melting and chemical speciation of the mantle are strongly affected by the form of C and carbonate stability. Therefore, the study of the stability and physical properties of carbonates at high pressures and temperatures is fundamental, because understanding the processes involved in the deep carbon cycle helps to improve our picture of the whole mantle.
The systematic characterization of the elastic properties of carbonates as a function of their structure and chemical composition is of great importance because it may allow to identify their presence and distribution by seismology. Inverting seismic observations to successfully constrain the chemical composition and mineralogy of the Earth’s interior requires knowledge of the physical properties of all possible Earth’s materials at pressures and temperatures applicable to the Earth’s interior. Up to now, a multitude of studies has focused on the construction of phase diagrams and structural transitions by means of X-ray diffraction and vibrational spectroscopy experiments.
Few studies are available on the complete elastic tensor of carbonates, however most of the datasets are not accompanied by an accurate characterization of the samples, which are often solid solutions and the exact chemical composition, density or the details about the experimental methods used are not presented. The aim of this thesis is to study the effect of chemical composition on the elastic properties of carbonates, providing a reliable dataset on the elasticity of the main carbonates. In particular, the elastic properties of crystalline aragonite, CaCO3, and Fe-dolomite, (Ca, Mg, Fe)(CO3)2, with different compositions were studied by Brillouin spectroscopy at ambient conditions. Brillouin spectroscopy was also used to investigate the elastic behaviour of amorphous calcium carbonate samples with different water contents (up to 18 wt%) at high pressures, up to 20 GPa.
Furthermore, the importance of cationic substitution on the structure and high pressure behaviour of carbonates was investigated by studying a synthetic CaCO3-SrCO3 solid solution at ambient conditions and at high pressures, up to 10 GPa, by single crystal X-ray diffraction. Finally, the study of the effect of composition on the elastic properties of families of isostructural solids was also extended to a different class of materials, the metal guanidinium formates. The elasticity of a family of perovskite metal organic frameworks, metal guanidinium formates C(NH2)3MII(HCOO)3, with MII =Mn, Zn, Cu, Co, Cd and Ca was investigated by combining Brillouin spectroscopy, resonant ultrasound spectroscopy, density functional theory and thermal diffuse scattering analysis.