Refine
Year of publication
- 2009 (112) (remove)
Document Type
- Article (79)
- Doctoral Thesis (33)
Language
- English (112) (remove)
Has Fulltext
- yes (112)
Is part of the Bibliography
- no (112)
Keywords
- Biochemie (2)
- Crystallography (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Virtual Screening (2)
- Wirkstoff-Rezeptor-Bindung (2)
- ADC (1)
- Adenin (1)
- Algebraisch Diagrammatische Konstrution (1)
Institute
- Biochemie und Chemie (112) (remove)
The transcription factor p63 is part of the p53 protein family, which consists of three members, p53, p63 and p73. P63 shares structural similarity with all family members, but is associated to different biological functions than p53 or p73. While p53 is mainly linked to tumor suppression and p73 is connected with neuronal development, p63 has been connected to critical biological roles within ectodermal development and skin stem cell biology as well as supervision of the genetic stability of oocytes. Due to its gene structure p63 is expressed as at least six different isoforms, three of them containing a N-terminal transactivation domain. The isoforms that are of biological relevance both have a C-terminal inhibitory domain that negatively regulates the transcriptional activity. This inhibitory domain is supposed to contain two individual components of which one is internally binding and masking the transactivation domain while the other one can be sumoylated. To further investigate this domain a mutational analysis with the help of transactivation assays in SAOS2 cells was carried out to identify the critical amino acids within the inhibitory domain and the impact on transcriptional activity of TAp63alpha, the p63-isoform which is essential for the integrity of the female germline. The results of these experiments show that a stretch of approximately 13 amino acids seems to be important for the regulation of transcriptional activity in TAp63alpha, due to the increased transcriptional activity occurring in this region after mutation. Additional experiments showed that this mechanism is distinct from sumoylation, which seems to have only implications for the intracellular level of TAp63alpha. As a conclusion, the C-terminus of the Tap63alpha is essential for two different mechanisms, which control the transcriptional activity of the protein. Both regulatory elements are independent from each other and can now be restricted to certain amino acids. Activation of the wild type protein might take place in the identified region via post-translational modification. Furthermore an inhibition assay was carried out to test if the same region might have implications on the second biological relevant isoform deltaNp63alpha. The results show that the same amino acids which show an impact on transcriptional activity in Tap63alpha lead to a significant change in functional behaviour of deltaNp63alpha. There is a possibility that both proteins are regulated with opposite effects via the same mechanisms, based at the C-terminus of the p63alpha-isoforms. In both cases a modification of these residues could lead to a more opened conformation of the protein with consequences on promoter binding, which can be even important for deltaNp63alpha with respect to promoter squelching. Both alpha-isoforms seem to be regulated via the C-terminus and to elucidate if that is also the case for TAp63gamma a deletion analysis was carried out. The results show that there are also amino acids within the C-terminus of TAp63gamma, which have implications on the transcriptional activity of the protein. Therefore the C-terminus seems to play a major role for regulation of diverse p63 isoforms.
Based on the commonly used and well-established state-of-the-art DNA sequencing method, i. e. Sanger sequencing, the major target of future research is to develop a fast, cost-effective and gelelectrophoresis-free sequencing method. The aim of the new sequencing technologies is to detect DNA mutations faster and more accurate in order to develop individual therapies for patients (personalized medicine). For this purpose, a lot of novel sequencing techniques like pyrosequencing, mass-spectrometry-assisted sequencing, sequencing by hybridization etc. have been put into practice and already led to commercialized sequencers. The sequencing technology we were mostly interested in is the so-called sequencing-by-synthesis method (SBS). This PhD thesis covers the synthesis of modified nucleosides – the so-called reversible terminators – and their evaluation as reversible terminators. These 3′-modified and dye-labeled nucleotides are incorporated by the polymerase into the DNA-template, then the DNA-synthesis is stopped. After detection of the fluorescent signal, the reversible terminator has to be cleavable in a way (i. e. the polymerase-blocking modification) that the DNA-synthesis can continue. As a result of the polymerase-acceptance tests that have been carried out with the two triphosphates cyanoethoxymethyl(CEM)-dTTP and cyanoethyl(CE)-dTTP as substrates it became clear that the latter one was better incorporated than the first one. Based on this knowledge all four key compounds for the whole reversible terminators possessing the cyanoethyl (CE) group where synthesized within this PhD thesis. Additionally to the synthesis of the modified key compounds, the cleavability of the cyanoethyl function had to be evaluated which is an essential requirement of a reversible terminator for SBS. For addressing this issue, three different CE- and CEM modified monophosphates were created. For each of these three monophosphates an individual synthetic strategy has been developed within this PhD work, each of these strategies and subsequent phosphorylation led to the desired modification. These previously unknown model compounds mimicking the solubility of short oligonucleotides were employed the for qualitative cleavage experiments after their purification and spectroscopical characterization. With these three monophosphates suitable cleavage conditions for a quantitative removal of the CE and the CEM group were examined. In case of the CE function we selectively improved the cleavage conditions while varying the solvent, the reaction temperature as well as the amount of cleaving agent used, in order to make the conditions applicable for an SBS experiment. Due to the fact that the CE function was the most important modification for our SBS experiment, we could even optimize the cleavage efficiency by employing co-solvents like DMSO or DMF. An additional cleavage experiment was carried out by using a short CE-modified oligomer which led to further results that were comparable to the ones obtained from the cleavage experiments of the monomers. One big difference is the required amount of TBAF as cleaving agent for the quantitative removal of the CE-modification from the oligomer. In this case, 7500 equivalents of TBAF are needed for complete CE cleavage at 45 °C compared to the amount of 40 to 80 equivalents TBAF for the monomer (monophosphate). As a conclusion of this result we assume that the amount of cleaving agent and the solubility of the oligomer plays an important role in the CE cleavage efficiency. This assumption was already supported by Saneyoshi et al. who demonstrated for CE-modified RNA oligonucleotides that the CE-cleavage rate is strongly lowered with the increasing of the oligomer length. Thus we could demonstrate that the CE function is quantitatively removable from an oligomer without destroying it. With these results in hands we could prove that the CEM and the CE group are quantitatively cleavable and therefore applicable as blocking groups for reversible terminators. The conditions for the CE cleavage are used for the ArraySBS-“proof-of-principle” which is currently under investigation.
X-ray structure of the Na+-coupled Glycine-Betaine symporter BetP from Corynebacterium glutamicum
(2009)
Cellular membranes are important sites of interaction between cells and their environment. Among the multitude of macromolecular complexes embedded in these membranes, transporters play a particularly important role. These integral membrane proteins perform a number of vital functions that enable cell adaptation to changing environmental conditions. Osmotic stress is a major external stimulus for cells. Bacteria are frequently exposed to either hyperosmotic or hypoosmotic stress. Typical conditions for soil bacteria, such as Corynebacterium glutamicum, vary between dryness and sudden rainfall. Physical stimuli caused by osmotic stress have to be sensed and used to activate appropriate response mechanisms. Hypoosmotic stress causes immediate and uncontrolled influx of water. Cells counteract by instantly opening mechanosensitive channels, which act as emergency valves leading to fast efflux of small solutes out of the cell, therebydiminishing the osmotic gradient across the cell membrane. Hyperosmotic stress, on the other hand, results in water efflux. This is counterbalanced by an accumulation of small, osmotically active solutes in the cytoplasm, the so-called compatible solutes. They comprise a large variety of substances, including amino acids (proline), amino acid derivatives (betaine, ectoine), oligosaccharides (trehalose), and heterosides (glucosylglycerol). Osmoregulated transporters sense intracellular osmotic pressure and respond to hyperosmotic stress by facilitating the inward translocation of compatible solutes across the cell membrane, to restore normal hydration levels. This work presents the first X-ray structure of a member of the Betaine-Choline-Carnitine-Transporter (BCCT) family, BetP. This Na+-coupled symporter from Corynebacterium glutamicum is a highly effective osmoregulated and specific uptake system for glycine-betaine. X-ray structure determination was achieved using single wavelength anomalous dispersion (SAD) of selenium atoms. Selenium was incorporated into the protein during its expression in methione auxotrophic E. coli cells, grown in media supplemented with selenomethionine. SAD data with anomalous signal up to 5 Å led to the detection of 39 selenium sites, which were used to calculate the initial electron density map of the protein. Medium resolution and high data anisotropy made the structure determination of BetP a challenging task. A specific strategy for data anisotropy correction and a combination of various crystallographic programs were necessary to obtain an interpretable electron density map suitable for model building. The crystal structure of BetP shows a trimer with glycine-betaine bound in a three-fold cation-pi interaction built by conserved tryptophan residues. The bound substrate is occluded from both sides of the membrane and aromatic side chains line its transport pathway. Very interestingly, the structure reveals that the alpha-helical C-terminal domain, for which a chemo- and osmosensory function was elucidated by biochemical methods, interacts with cytoplasmic loops of an adjacent monomer. These unexpected monomer-monomer interactions are thought to be crucial for the activation mechanism of BetP, and a new atomic model combing biochemical results with the crystal structure is proposed. BetP is shown to have the same overall fold as three unrelated Na+-coupled symporters. While these were crystallised in either the outward- or inward-facing conformation, BetP reveals a unique intermediate state, opening new perspectives on the alternating access mechanism of transport.
Despite the well-known importance of ribonucleic acids (RNA) in cell biology, it is astounding to realize the pace at which new fundamental functions of RNAs have been discovered. One of the fundamental reasons for the multitude of functions of RNA is the property of RNA to adopt different conformations or folds. The primary sequence of RNA, a linear polymer built from four different repetition units, can fold into alternate secondary structure motifs which in turn form alternate long-range interactions in complex tertiary structures. Ligands such as metal ions or small molecular weight metabolites and also proteins or peptides can bind to RNA and induce the changes in tertiary conformation. For example, in the cell, RNA participates in gene regulation in the form of riboswitches. Riboswitches are found in untranslated regions of messenger RNA (mRNA) and adopt alternate conformations depending on the presence or absence of specific metabolites. If a metabolite is present above a specific concentration, it induces a conformational change in the respective riboswitch by binding and thereby alters gene expression. Another example is the RNA thermometer which participates in the cell translational mechanism by a similar strategy. Translation initiation requires the binding of RNA thermometers to the ribosome. The ribosome binding region is located in the 5’ untranslated region of mRNA. At low temperatures this region is prevented from binding to the ribosome by forming basepairs. At higher temperatures, these basepairs dissociate allowing ribosome binding and subsequent translation. Therefore, the characterization and delineation of the kinetics and pathway of RNA folding is important to understand the function of RNA and is an important contribution to fundamentally understand RNA’s role in the cell. RNA conformational transitions occur over a wide range of timescales. Depending on the timescale, various biophysical techniques are used to study RNA conformational transitions. In these biophysical studies, achieving good structural and temporal resolution constitute frequently encountered challenges or limitations. For example, single molecule FRET spectroscopy provides high temporal resolution in the milliseconds at high sensitivity but lacks atomic resolution. Recent advances in the field of Nuclear Magnetic Resonance (NMR) spectroscopy have enabled the elucidation of tertiary folding events to be characterized with atomic resolution. This thesis involves the use of NMR spectroscopy to characterize the folding of RNA molecules. Kinetics experiments require rapid initiation of the kinetics followed by monitoring of the reaction. In this thesis, two different folding initiation techniques have been applied and coupled to the subsequent detection of RNA folding using NMR spectroscopy, namely, photocaging and rapid mixing. The method of photocaging is well established (Kuhn and Schwalbe, 2000) and builds on the following principle: A photolabile moiety is attached to a molecule that prevents a specific interaction. Upon irradiation of the molecule with the photolabile group using laser light at a specific wave length, at which the molecule of interest is not absorbing, the protecting group is released. In our group, together with the group of S. Pitsch, ETH Lausanne, we could "cage" RNA at its equilibrium state by a photolabile molecule (similar work has been carried out in the group of A. Heckel). Rapid and traceless release of the photolabile precursor compound by a laser pulse releases the RNA to fold into its native state; the build-up of the native state of the RNA is monitored by NMR signals that are uniquely characteristic for the native state of the RNA. By optically coupling a laser source to an NMR magnet, the above procedure can take place in situ and the kinetics recorded by NMR. Several different molecules can be caged: The photocage can be attached to RNA. Then, a modified photolabile nucleotide can be placed at strategic positions of a target RNA whose folding properties is to be studied. The photocage can also be attached to a ligand: if folding is dependent on ligand binding then the ligand can be modified to carry a photosensitive unit whose degradation allows binding to RNA. In this thesis, an alternative method for photocaging is introduced. Here, metal ions essential for folding of the RNA are photocaged using the photolabile chelating agent Dimethyl-nitrophen (DMN). Photolysis of DMNr releases the metal ion, thereby RNA folding is initiated. In the rapid-mixing technique, one of (several) components required for proper folding of the RNA is rapidly injected into an NMR sample in situ by the use of a pneumatic injection device. ...
Zusammenfassung Die Alzheimersche Krankheit (AD) ist mit 60% die am häufigsten auftretende Art der Demenz. Weltweit sind ca. 24 Mio. Menschen von der neurodegenerativen Krankheit betroffen, welche sich durch den Verlust der kognitiven Fähigkeiten auszeichnet. Es gibt zwei Ausprägungen der Demenz, zum einen die sporadische Verlaufsform, die bei Menschen in einem Alter ab 65 Jahren auftritt und zum anderen die familiäre Alzheimersche Krankheit (FAD), die schon weitaus jüngere Menschen betrifft und auf genetische Mutationen zurück zu führen ist. Beide Formen der Demenz zeigen den gleichen neuropathologische Phänotyp, der zur Ausbildung von extrazellulären Plaques und intrazellulären Neurofibrillen führt. Durch die Entstehung der Plaques und der Neurofibrillen werden die Verbindungen zwischen den einzelnen Neuronen verringert und die Neuronen sterben ab. Für das Auftreten der FAD sind Mutationen in den Genen des Amyloid Vorläufer Proteins (APP, Substrat) sowie der Aspartatprotease Einheit des γ-Sekretase Komplexes, Presenilin 1 (PS1) oder Presenilin 2 (PS2), verantwortlich. Die γ-Sekretase ist ein membranständiger Komplex bestehend aus den vier Untereinheiten PS1 oder PS2, Nicastrin (Nct), Aph-1 und Pen-2. Um ausreichende Informationen über den γ-Sekretase Komplex bezüglich seiner Interaktionsflächen, seines Katalysemechanismus und seiner Substraterkennung zu erhalten, wäre es hilfreich seine 3 Dimensionale Struktur aufzuklären, wozu große Mengen der sauberen und homogenen Proteine benötigt werden. Die Herstellung von ausreichenden Proteinmengen stellt derzeit aber einen Engpass für die strukturelle und funktionelle Charakterisierung des γ-Sekretase Komplexes in-vitro dar. Alzheimer’s disease (AD) is the most common cause of dementia, which affects 24 million people worldwide. It is a neurodegenerative disorder, which occurs either in its most common form in people over 65 years or in the rare early-onset familial AD (FAD). Responsible for the autosomal dominant FAD are mutations in the genes encoding for the β-amyloid precursor protein (APP) and the two homologues integral membrane proteins Presenilin 1 (PS1) and Presenilin 2 (PS2). The two PSs are major but alternative components of the intramembrane aspartyl protease γ-secretase. Further components are the membrane proteins Nicastrin (Nct), Aph-1 and Pen-2. Production of sufficient amounts of protein samples is still the major bottleneck for the detailed functional and structural in-vitro characterization of the γ-secretase complex. Due to toxicity, stability and targeting problems, the overproduction of MPs in conventional in-vivo systems often has only limited success. Therefore, efficient expression protocols using the cell-free (CF) system were established in this work. After optimization, I was able to produce up to milligram amounts of the single proteins PS1 and PS2, the cleavage products PS1-NTF and PS1-CTF, and Pen-2. The in-vitro produced γ-secretase subunits were further characterized, concerning their purity, secondary fold, thermal stability and homogeneity. Highest purities with over 90% after affinity chromatography could be achieved for PS1-CTF and Pen-2. Reconstitution of PS1, PS1-NTF, PS1-CTF and Pen-2 into E. coli liposomes results in a homogeneously distribution, which gives evidence for a structural folding. This was confirmed by CD spectroscopy of PS1-CTF and Pen-2. The thermal stability of Pen-2 shows a transition at 68°C, whereas PS1-CTF is stable up to 95°C. Both proteins show in addition homogeneous elution profiles investigated by analytical SEC and exhibit a monomeric (Pen-2) or dimeric (PS1-CTF) character analyzed by blue native PAGE. Different methods were performed to get evidence about the assembly of the complex, like pull-down experiments, immunoprecipitation, co-expression of radioactive labeled subunits and titration assays by liquid-state NMR. First hints for an interaction of the CF synthesized proteins could be observed by co-expression. Supplemental, Pen-2 and CTF could be purified in sufficient amounts and to apparent homogeneity that allow structural approaches by X-ray crystallography and liquid-state NMR spectroscopy. First conditions for protein crystals were achieved for Pen-2 and structural investigations of PS1-CTF by liquid-state NMR could be performed after optimization of the expression-, purification- and detergent conditions.
Background: Nitric oxide (NO) is an essential vasodilator. In vascular diseases, oxidative stress attenuates NO signaling by both chemical scavenging of free NO and oxidation and down-regulation of its major intracellular receptor, the alpha/beta heterodimeric heme-containing soluble guanylate cyclase (sGC). Oxidation can also induce loss of sGC's heme and responsiveness to NO.
Results: sGC activators such as BAY 58-2667 bind to oxidized/heme-free sGC and reactivate the enzyme to exert disease-specific vasodilation. Here we show that oxidation-induced down-regulation of sGC protein extends to isolated blood vessels. Mechanistically, degradation was triggered through sGC ubiquitination and proteasomal degradation. The heme-binding site ligand, BAY 58-2667, prevented sGC ubiquitination and stabilized both alpha and beta subunits.
Conclusion: Collectively, our data establish oxidation-ubiquitination of sGC as a modulator of NO/cGMP signaling and point to a new mechanism of action for sGC activating vasodilators by stabilizing their receptor, oxidized/heme-free sGC.
A generic drug product (World Health Organization (WHO) terminology: multisource product) is usually marketed and manufactured after the expiry date of the innovator’s patent. Generic drugs are less expensive than the innovator products because generic manufacturers do not have to amortize the investment costs of research, development, marketing, and promotion. Multisource products must contain the same active pharmaceutical ingredients (APIs) as the original formulation and have to be shown to be interchangeable with the original formulation. Multisource products have to be shown bioequivalent to the innovator counterpart with respect to pharmacokinetic and pharmacodynamic properties. Multisource products are therefore identical in dose, strength, route of administration, safety, efficacy, and intended use. Bioequivalence can be demonstrated by in vitro dissolution, pharmacokinetic, pharmacodynamic or clinical studies. Since 2000, the U.S. Food and Drug Administration (FDA) allows the approval of certain multisource products solely on the basis of in vitro studies, i.e. by waiving in vivo studies in humans (“Biowaiver”), based on the Biopharmaceutics Classification Scheme (BCS). The BCS characterizes APIs by their solubility and permeability in the gastrointestinal tract (GIT). The different BCS Classes I-IV (Class I: high solubility, high permeability; Class II: low solubility, high permeability; Class III: high solubility, low permeability and Class IV: low solubility, low permeability) result from all possible combinations of high and low solubility with high and low permeability. Since the adoption of the BCS by the FDA in 1995, the BCS criteria have been under continuous development. In 2006, the WHO has released the most recent bioequivalence guidance including relaxed criteria for bioequivalence studies based on modified BCS criteria. According to this guidance, APIs belonging to the BCS classes I – and under defined conditions - II and III – are eligible for a biowaiver-based approval. The principal objective of this work was to characterize the first-line anti tuberculosis APIs, isoniazid, pyrazinamide, ethambutol dihydrochloride and rifampicin, according to their physicochemical, biopharmaceutical, pharmacokinetic and pharmacological properties and to classify them according to the BCS. Ethambutol dihydrochloride and isoniazid were classified as borderline BCS class I/III APIs. Pyrazinamide was classified as a BCS class III and rifampicin as a BCS class II API. Based on the BCS classification and the additional criteria defined in the WHO bioequivalence guidance, the possibility of biowaiver-based approval for immediate release (immediate release) solid oral dosage forms containing the first-line antituberculosis drugs was evaluated. A biowaiver-based approval with defined constraints was recommended for immediate release solid oral dosage forms containing isoniazid (interaction with reducing sugars), pyrazinamide and ethambutol dihydrochloride (relative narrow therapeutic index). Rifampicin was classified as a BCS class II API, and it was concluded that rifampicin containing solid oral immediate release drug products as well as Scale-Up and Post-Approval Changes (SUPAC) changes should not be approved by a biowaiver on the following basis: (i) its solubility and dissolution are highly variable due to polymorphism and instability, (ii) concomitant intake of food and antacids reduces its absorption and bioavailability, (iii) no in vitro predictive dissolution test has been found which correlates to in vivo absorption and (iv) several publications reporting cases of non-bioequivalent and bioinequivalent rifampicin products have been located in the literature. Thus, it is recommended that bioequivalence of rifampicin containing solid oral immediate release drug products should be established by in vivo pharmacokinetic studies in humans. This risk-benefit benefit assessment of a biowaiver-based approval was presented as a poster at the American Association of Pharmaceutical Scientists (AAPS) 2005 and subsequently published as “Biowaiver Monographs” in the Journal of Pharmaceutical Sciences. Based on the assessment of the dissolution properties of the antituberculosis drugs for a biowaiver approval, quality control dissolution methodologies for the International Pharmacopoeia (Pharm. Int.) were developed, presented at the WHO expert meeting and adopted in the Pharm. Int. (http://www.who.int/medicines/publications/pharmprep/OMS_TRS_948.pdf). Additionally, preliminary biowaiver recommendations were also developed for four firstline antimalarial drugs listed on the WHO Essential Medicines List (EML): Quinine, as both the hydrochloride and sulphate, and proguanil hydrochloride were classified as borderline BCS class I/III APIs. Since quinine is a narrow therapeutic index drug and many cases of non-bioequivalence have been reported in the literature, a biowaiverbased approval was not recommended. For solid oral immediate release dosage forms containing proguanil a biowaiver-based approval was recommended under the condition that they dissolve very rapidly. Primaquine phosphate was classified as a BCS class I API. Therefore, a biowaiver-based approval was recommended for immediate release solid oral dosage forms containing primaquine phosphate. Mefloquine hydrochloride was classified as a basic, BCS class IV/II API, making it ineligible for the biowaiver. Additionally, reports of non-bioequivalence and a narrow therapeutic index were found in the scientific literature. Consequently, bioequivalence of solid oral immediate release dosage forms containing mefloquine hydrochloride should be established by in vivo pharmacokinetic studies. The results for quinine hydrochloride and sulphate, proguanil hydrochloride, primaquine diphosphate and mefloquine hydrochloride were presented as a poster at the Pharmaceutical Sciences World Congress (PSWC) 2007 and published as a WHO Collaborating Center Report in June 2006. The aim of this project was to collect, evaluate, generate and publish relevant information for a biowaiver-based approval of essential medicines in order to provide a summary to local regulatory authorities. This information complements the selected list of essential medicines by providing information about the biopharmaceutical properties and pharmaceutical quality of solid oral immediate release dosage forms containing these APIs. The aim of the biowaiver project, inspired by the WHO and brought in life by the International Pharmaceutical Federation (FIP), is to enable access to essential medicines in standardized quality at an affordable price. In this work, a significant contribution to this aim in the form of four biowaiver monographs for the antituberculosis drugs and several reports on the antimalarials has been achieved.
Background: Microarray analysis still remains a powerful tool to identify new components of the transcriptosome and it has helped to increase the knowledge of targets triggered by stress conditions such as hypoxia and nitric oxide. However, analysis of transcriptional regulatory events remain elusive due to the contribution of altered mRNA stability to gene expression patterns, as well as changes in the half-life of mRNAs, which influence mRNA expression levels and their turn over rates. To circumvent these problems, we have focused on the analysis of newly transcribed (nascent) mRNAs by nuclear run on (NRO), followed by microarray analysis. Result: We identified 188 genes that were significantly regulated by hypoxia, 81 genes were affected by nitric oxide, and 292 genes were induced by the co-treatment of macrophages with both NO and hypoxia. Fourteen genes (Bnip3, Ddit4, Vegfa, Trib3, Atf3, Cdkn1a, Scd1, D4Ertd765e, Sesn2, Son, Nnt, Lst1, Hps6 and Fxyd5) were common to hypoxia and/or nitric oxide treatments, but with different levels of expression. We observed that 166 transcripts were regulated only when cells were co-treated with hypoxia and NO but not with either treatment alone, pointing to the importance of a crosstalk between hypoxia and NO. In addition, both array and proteomics data supported a consistent repression of hypoxia regulated targets by NO. Conclusion: By eliminating the interference of steady state mRNA in gene expression profiling, we increased the sensitivity of mRNA analysis and identified previously unknown hypoxia-induced targets. Gene analysis profiling corroborated the interplay between NO- and hypoxia-induced signalling.
Photo-initiated processes, like photo-excitation and -deexcitation, internal conversion, excitation energy transfer and electron transfer, are of importance in many areas of physics, chemistry and biology. For the understanding of such processes, detailed knowledge of excitation energies, potential energy surfaces and excited state properties of the involved molecules is an essential prerequisite. To obtain these informations, quantum chemical calculations are required. Several quantum chemical methods exist which allow for the calculation of excited states. Most of these methods are computationally costly what makes them only applicable to small molecules. However, many biological systems where photo-processes are of interest like light-harvesting complexes in photosynthesis or the reception of light in the human eye by rhodopsin are quite large. For large systems, however, only few theoretical methods remain applicable. The currently most widely used method is time-dependent density functional theory (TD-DFT), which can treat systems of up to 200–300 atoms with the excitation energies of some excited states exhibiting errors of less than 0.5 eV. Yet, TD-DFT has several drawbacks. The most severe failure of TD-DFT is the false description of charge transfer states which is particularly problematic in case of larger systems where it yields a multitude of artificially low-lying charge transfer states. But also Rydberg states and states with large double excitation character are not described correctly. Still, if these deficiencies are kept in mind during the interpretation of results, TD-DFT is a useful tool for the calculation of excited states. In my thesis, TD-DFT is applied in investigations of excitation energy and electron transfer processes in light-harvesting complexes. Since light-harvesting complexes, which consist of thousands of atoms, are by far too large to be calculated, model complexes for the processes of interest are constructed from available crystal structures. The model complexes are used to calculate potential energy curves along meaningful reaction coordinates. Artificial charge transfer states are corrected with the help of the so-called ∆DFT method. The resulting potential energy curves are then interpreted by comparison with experimental results. For the light-harvesting complex LH2 from purple bacteria the experimentally observed formation of carotenoid radical cations is studied. It is shown that the carotenoid radical cation is formed most likely via the optically forbidden S1 state of the carotenoid. In light-harvesting complex LHC-II of green plants the fast component of the so-called non-photochemical quenching (NPQ) is investigated. Two of several different hypotheses on the mechanism of NPQ, which have been proposed recently, are studied in detail. The first one suggests that NPQ proceeds via simple replacement of violaxanthin by zeaxanthin in the binding pocket in LHC-II. However, the calculated potential energy curves exhibit no difference between violaxanthin and zeaxanthin in the binding pocket. In combination with experimental results it is thus shown that simple replacement alone does not mediate NPQ in LHC-II. The second hypothesis proposes conformational changes of LHC-II that lead to quenching at the central lutein and chlorophyll molecules during NPQ. My TD-DFT calculations demonstrate that if this mechanism is operative, only the lutein 1 which is one of two central luteins present in LHC-II can take part in the quenching process. This is corroborated by recent experiments. Though several conclusions can be drawn from the investigations using TD-DFT, the interpretability of the results is limited due to the deficiencies of the method and of the models. To overcome the methodological deficiencies, more accurate methods have to be employed. Therefore, the so-called algebraic diagrammatic construction scheme (ADC) is implemented. ADC is a widely overlooked ab initio method for the calculation of excited states, which is based on propagator theory. Its theoretical derivation proceeds via perturbation expansion of the polarization propagator, which describes electronic excitations. This yields separate schemes for every order of perturbation theory. The second order scheme ADC(2), which is employed here, is the equivalent to the Møller-Plesset ground state method MP(2), but for excited states. It represents the computationally cheapest excited state method which can correctly describe doubly excited states, as well as Rydberg and charge transfer states. The quality of ADC(2) results is demonstrated in calculations on linear polyenes which serve as model systems for the larger carotenoid molecules. The calculations show that ADC(2) describes the three lowest excited states of polyenes sufficiently well, particularly the optically forbidden S1 state which is known to possess large double excitation character. Yet, the applicability of the method is limited compared to TD-DFT due to the much larger computational requirements. To facilitate the calculation of larger systems with ADC(2) a new variant of the method is developed and implemented. The variant employs the short-range behavior of electron correlation to reduce the computational effort. As a first step, the working equations of ADC(2) are transformed into a basis of local orbitals. In this basis negligible contributions of the equations which are due to electron correlation can be identified based on the distances of local orbitals. A so-called “bumping” scheme is implemented which removes the negligible parts during a calculation. This way, the computation times as well as the disk space requirements can be reduced. With the “bumping” scheme several new parameters are introduced that regulate the amount of “bumping” and thereby the speed and the accuracy of computations. To determine useful values for the parameters an evaluation is performed using the linear polyene octatetraene as test molecule. From the evaluation an optimal set of parameter values is obtained, so that the computation times become minimal, while the errors in the excitation energies due to the “bumping” do not exceed 0.15 eV. With further calculations on various molecules of different sizes it is tested if these parameter values are universal, i.e. if they can be used for all molecules. The test calculations show that the errors in the excitation energies are below 0.15 eV for all test systems. Additionally, no trend is visible for the errors that their magnitude might depend on the system. In contrast, the amount of disregarded contributions in the calculations increases drastically with growing system size. Thus, the local variant of ADC(2) can be used in future to reliably calculate excited states of systems which are not accessible with conventional ADC(2).
In the title compound, C27H20F6N2O2, the dihedral angles between the planes of the aromatic rings connected by the ether O atoms are 84.13 (8) and 75.06 (9)°. The crystal structure is stabilized by N-H...O and N-H...F hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.037; wR factor = 0.088; data-to-parameter ratio = 8.2.
In the title compound, C17H12F2N2OS, the planar thiazole ring (r.m.s. deviation = 0.012 Å) makes dihedral angles of 15.08 (9) and 81.81 (6)° with the 4-fluorophenyl and 2-fluorophenyl rings, respectively. The 2-fluorophenyl ring is disordered over two orientations with site-occupancy factors of 0.810 (3) and 0.190 (3). The structure contains intermolecular C-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; disorder in main residue; R factor = 0.034; wR factor = 0.082; data-to-parameter ratio = 16.1.
The title compound, C16H14N4, features an aromatic ring with two 2,2´-dicyanopropyl residues in positions 1 and 3, which are located above and below the ring plane. The two residues differ in their conformation with respect to the aromatic ring: whereas one of the Cmethyl-C-Cmethylene-Caromatic torsion angles is gauche [68.93 (12)°], the other one is fully staggered [177.63 (9)°]. The crystal structure is stabilized by C-H...N hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.101; data-to-parameter ratio = 15.0.
4-Chloro-N-m-tolylbenzamide
(2009)
In the title compound, C14H12ClNO, the dihedral angle between the two aromatic rings is 11.29 (15)°. The crystal packing is stabilized by N-H...O hydrogen bonds linking the molecules into chains running along the c axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.066; wR factor = 0.178; data-to-parameter ratio = 13.7.
6-(4-Nitrophenoxy)hexanol
(2009)
The title compound, C12H17NO4, features an almost planar molecule (r.m.s. deviation for all non-H atoms = 0.070 Å). All methylene C-C bonds adopt an antiperiplanar conformation. In the crystal structure the molecules lie in planes parallel to (1\overline{1}2) and the packing is stabilized by O-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.066; wR factor = 0.185; data-to-parameter ratio = 13.2.
In the title molecule, C13H16ClNO, the mean plane of the atoms in the -CONH- group forms a dihedral angle of 42.0 (4)° with the benzene ring plane. In the crystal structure, molecules are linked by intermolecular N-H...O hydrogen bonds, generating C(4) chains along [100]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.069; data-to-parameter ratio = 18.2.
The structure of the title compound, C14H9Cl3N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the thiocarbonyl and carbonyl groups subtends dihedral angles of 48.19 (3) and 87.51 (3)° with the planes formed by the 3-chloro and 2,6-dichlorophenyl rings, respectively; the dihedral angle between the two benzene ring planes is 45.32 (3)°. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form intermolecular N-H...S and N-H...O hydrogen bonds, generating a sheet along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.094; data-to-parameter ratio = 25.5.
The title compound, C14H6Cl6N2OS·0.5CHCl3, crystallizes with four 1-(2,6-dichlorobenzoyl)-3- (2,3,5,6-tetrachlorophenyl)thiourea molecules and two trichloromethane molecules in the asymmetric unit. The thiourea molecules exist in the solid state in their thione forms with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The -NH-C(=S)-NH-C(=O)- plane is almost perpendicular to the benzene ring in each thiourea molecule. Intramolecular N-H...O hydrogen bonds stabilize the molecular conformation and intermolecular N-H...S hydrogen bonds stabilize the packing arrangement. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.051; wR factor = 0.147; data-to-parameter ratio = 23.2.
The title molecule, C16H15ClN2OS, exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and intermolecular N-H...S hydrogen bonds link the molecules into centrosymmetric dimers. The dihedral angle between the aromatic rings is 50.18 (5)°. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.085; data-to-parameter ratio = 15.3.
The asymmetric unit of the title compound, C14H8Cl4N2OS·0.5H2O, contains two independent molecules with different conformations with respect to the aromatic ring planes, and one water molecule. The bond lengths and angles are typical of thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The dihedral angles between the two aromatic planes are 66.93 (8) and 60.44 (9)° in the two independent molecules. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the crystal packing is characterized by N-H...O, O-H...S and O-H...Cl hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.045; wR factor = 0.125; data-to-parameter ratio = 16.8.
The crystal structure of the title compound, C14H8Cl4N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the central SONNCC atom set subtends a dihedral angle of 31.47 (3)° with the benzene ring. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form centrosymmetric dimers via intermolecular N-H...S hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.087; data-to-parameter ratio = 17.9.
The two aromatic rings in the title compound, C15H12Cl2N2O2S, enclose a dihedral angle of 37.49 (6)°. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. In the crystal, molecules are connected by N-H...O and N-H...S hydrogen bonds, forming chains running along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ (C–C) = 0.002 Å; disorder in main residue; R factor = 0.035; wR factor = 0.087; data-to-parameter ratio = 18.9.
The title compound, Cs2Mg(H2P2O7)2·2H2O, is isostructural with the related known isoformular phosphates. The crystal framework consists of corner-sharing MgO6 and H2P2O7 polyhedra, leading to tunnels parallel to the b-axis direction in which Cs+ ions are located. The H2P2O7 unit shows a bent eclipsed conformation. The Mg2+ ion lies on an inversion center. The water molecules form hydrogen bonds to O atoms of two different dihydrogenphosphate ions, which are further hydrogen bonded to symmetry-equivalent dihydrogenphosphate ions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(P–O) = 0.006 Å; R factor = 0.048; wR factor = 0.125; data-to-parameter ratio = 12.3.
The crystal structure of the title compound, C15H17BrN2O4S, is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-bromophenyl group with the mean plane passing through the hydantoin unit is 83.29 (5)°. The cyclohexyl group adopts an ideal chair conformation with the methyl group in an equatorial position. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.030; wR factor = 0.070; data-to-parameter ratio = 16.8.
The five-membered ring of the title compound, C10H14NO, is almost planar [mean deviation from best plane = 0.006 (1) Å]. The N-O bond is in the plane of the five-membered ring. The molecule is positioned about a pseudo-mirror plane at y = 0.375. In the crystal, molecules are connected by intermolecular C-H...O contacts into layers parallel to (010). Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.002 Å; R factor = 0.062; wR factor = 0.157; data-to-parameter ratio = 27.3.
In the title compound, C15H17ClN2O4S, the atoms in the hydantoin ring are coplanar (r.m.s. deviation = 0.006 Å). The crystal structure is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-chlorophenyl group with the plane passing through the hydantoin unit is 82.98 (4)°. The cyclohexyl ring adopts an ideal chair conformation. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.081; data-to-parameter ratio = 15.0.
In the title Grignard reagent, [MgBr(C12H9)(C5H10O)2], the Mg centre adopts a distorted tetrahedral MgCO2Br arrangement. The dihedral angle between the two aromatic rings of the biphenyl residue is 44.00 (14)°. Each molecule incorporates one R- and one S-configured 2-methyltetrahydrofuran molecule. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.007 Å; R factor = 0.045; wR factor = 0.108; data-to-parameter ratio = 17.4.
The title compound, C17H18N2O6, crystallizes with two molecules in the asymmetric unit. In both molecules, one of the C-C bonds of the pentamethylene chain connecting the two aromatic rings is in a trans conformation and another displays a gauche conformation. The aromatic rings within each molecule are nearly coplanar [dihedral angles = 3.36 (9) and 4.50 (9)°] and the nitro groups are twisted slightly out of the planes of their attached rings [dihedral angles = 8.16 (3)/6.6 (2) and 4.9 (4)/3.8 (3)°]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.040; wR factor = 0.101; data-to-parameter ratio = 13.5.
In the title compound, C16H16BrNO4, the dihedral between the planes of the aromatic rings is 7.74 (18)°. The amide group is tilted with respect to the bromo- and methoxy-substituted aromatic rings by 36.3 (8) and 35.2 (8)°, respectively. The meta-methoxy groups are essentially in-plane with the aromatic ring [dihedral angles CH3-O-C-C = -4.6 (4) and -2.5 (4)°]. The para-methoxy group is markedly displaced from the ring plane [dihedral angle CH3-O-C-C = -72.5 (4)°]. The crystal packing is stabilized by N-H...O hydrogen bonds linking the molecules into chains running along the b axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.033; wR factor = 0.076; data-to-parameter ratio = 14.6.
Adamantane-1-thioamide
(2009)
The title compound, C11H17NS, is an important intermediate for the synthesis of biologically active adamantlythiazolo-oxadiazoles. The adamantyl residue is disordered about a twofold rotation axis over two sites with site-occupation factors of 0.817 (3) and 0.183 (3). The crystal structure is stabilized by intermolecular N-H...S hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean &963;(C–C) = 0.002 Å; disorder in main residue; R factor = 0.038; wR factor = 0.103; data-to-parameter ratio = 12.3.
The title compound, C21H16N2O2, was derived from 1-(2-hydroxyphenyl)-3-(-methoxyphenyl)propane-1,3-dione. The molecular structure of the title compound is stabilized by an intramolecular O-H...N hydrogen bond. The dihedral angle between the hydroxyphenyl ring involved in this intramolecular hydrogen bond and the pyrazole ring is significantly smaller [10.07 (6)°] than the dihedral angle between the pyrazole and the other hydroxyphenyl ring [36.64 (5)°]. The benzene ring makes a dihedral angle of 54.95 (3)° with the pyrazole ring. The crystal packing is stabilized by O-H...O and O-H...N hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.039; wR factor = 0.101; data-to-parameter ratio = 16.2.
The title compound, C22H18N2O2, was derived from 1-(2-hydroxyphenyl)-3-(4-methoxyphenyl)propane-1,3-dione. The central pyrazole ring forms dihedral angles of 16.83 (5), 48.97 (4) and 51.68 (4)°, respectively, with the methoxyphenyl, phenyl and hydroxyphenyl rings. The crystal packing is stabilized by O-H...N hydrogen bonding. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.096; data-to-parameter ratio = 17.0.
The title compound, C25H22O5, was obtained by a dehydrogenative carbonylation reaction. It crystallizes with one half-molecule in the asymmetric unit. The molecules have crystallographic C2 symmetry and the two atoms of the carbonyl group are located on the rotation axis. The methoxy groups are coplanar with the benzene ring to which they are attached [C-C-O-C = 1.0 (6)°]. The two furan rings are inclined at 17.3 (3)° with respect to each other and the dihedral angle between the furan ring and the benzene ring is 75.83 (12)°. The crystal structure is stabilized by C-H...O hydrogen bonds. Key indicators: single-crystal X-ray study; T = 183 K; mean ( σ(C–C) = 0.006 Å; R factor = 0.081; wR factor = 0.195; data-to-parameter ratio = 13.4.
The title molecule, C14H9ClN2OS, exists in the solid state in its amide form with a typical C=O bond length, as well as shortened C-N bonds. The plane containing the HNCO atoms subtends dihedral angles of 12.3 (4) and 8.1 (3)° with the planes of the phenyl ring and benzothiazole group, respectively, whereas the dihedral angle between the planes of the phenyl ring and the benzothiazole group is 5.96 (6)°. In the crystal, molecules form intermolecular N-H...N hydrogen bonds, generating independent scissor-like R22(8) dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.028; wR factor = 0.079; data-to-parameter ratio = 13.3.
In the molecule of the title compound, C14H16ClN3O, the benzene and pyrazole rings are oriented at a dihedral angle of 3.50 (3)°. In the crystal structure, intermolecular N-H...O hydrogen bonds link the molecules into chains. A [pi]-[pi] contact between the benzene and pyrazole rings [centroid-centroid distance = 3.820 (3) Å] may further stabilize the structure. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.031; wR factor = 0.086; data-to-parameter ratio = 14.1.
2-Chloro-5-nitroaniline
(2009)
The molecule of the title compound, C6H5ClN2O2, is close to being planar (rms deviation = 0.032 Å for all non-H atoms), with a maximum deviation of -0.107 (3) Å for an O atom. In the crystal structure, intermolecular N-H...O and N-H...N interactions link the molecules into a three-dimensional network. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.023; wR factor = 0.061; data-to-parameter ratio = 11.8.
4-(4-Nitrophenoxy)biphenyl
(2009)
The two phenyl rings of the biphenyl unit of the title compound, C18H13NO3, are almost coplanar [dihedral angle 6.70 (9)°]. The nitrophenyl ring, on the other hand, is significantly twisted out of the plane of the these two rings, making dihedral angles of 68.83 (4)° with the middle ring and 62.86 (4)° with the end ring. The nitro group is twisted by 12.1 (2)° out of the plane of the phenyl ring to which it is attached. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.040; wR factor = 0.118; data-to-parameter ratio = 12.8.
The six-membered ring of the title compound, C11H16NO, has a distorted envelope conformation. The piperidine N atom deviates by 0.128 (1) Å from the plane through its three neighbouring atoms. In the crystal structure, molecules are connected by intermolecular Cethynyl-H...O contacts to form chains extending in the [10\overline{1}] direction. Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.001 Å ; R factor = 0.040; wR factor = 0.112; data-to-parameter ratio = 27.3.
Molecules of the title compound, C40H42BrNO6, are located on a crystallographic twofold rotation axis. As a result, the nitro group and bromine residue are mutually disordered with equal occupancies. The propoxy-substituted aromatic rings are close to parallel to each other [dihedral angle = 21.24 (1)°], whereas the propenoxy-substituted rings enclose a dihedral angle of 70.44 (1)°. The dihedral angles between the methylene C atoms and the aromatic rings shows that the propenoxy substituted rings are bent away from the calixarene cavity [dihedral angle between the planes = 35.22 (8)°], whereas the propoxy-substituted rings are almost perpendicular [79.38 (10)°] to the plane of the methylene C atoms. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.006 A° ; disorder in main residue; R factor = 0.065; wR factor = 0.130; data-to-parameter ratio = 11.8.
The asymmetric unit of the title compound, [K(C3H3N2)(C12H24O6)], is composed of a potassium cation bonded to the six O atoms of a crown ether molecule and the two N atoms of a pyrazolate anion. The K...O distances range from 2.8416 (8) to 3.0025 (8) Å, and the two K...N distances are 2.7441 (11) and 2.7654 (11) Å. The K cation is displaced by 0.8437 (4) Å from the best plane through the six O atoms. The latter plane is almost perpendicular to the plane of the pyrazolate ring [dihedral angle 83.93 (3)°]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.026; wR factor = 0.066; data-to-parameter ratio = 16.5.
The title compound, C14H9Cl3N2OS, has bond lengths and angles which are quite typical for thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C=S and C=O bond lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. Intermolecular N-H...S hydrogen bonds link the molecules to form centrosymmetric dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.029; wR factor = 0.078; data-to-parameter ratio = 17.2.
In the title compound, C30H34N2O6, the complete molecule is generated by a crystallographic 2/m symmetry operation. The 1-oxyl-3-pyrroline-3-carboxylate group lies on a mirror plane. The dihedral angle between the ring planes of the biphenyl fragment is constrained by symmetry to be zero, resulting in rather short intramolecular H...H contact distances of 2.02 Å. In the crystal, molecules are connected along the a-axis direction by very weak intermolecular methyl-phenyl C-H...[pi] interactions. The C-H bond is not directed to the center of the benzene ring, but mainly to one C atom [C-H...C(x - 1, y, z): H...C = 2.91 Å and C-H...C = 143°]. Key indicators: single-crystal X-ray study; T = 169 K; mean σC–C) = 0.002 Å ; R factor = 0.049; wR factor = 0.126; data-to-parameter ratio = 19.8.
The title compound, C14H20O3, is a synthetic analogue with a long aliphatic side chain of the important food additive and flavoring agent, vanillin. There are two independent molecules in the asymmetric unit, each having an essentially planar conformation (r.m.s. deviations of 0.023 and 0.051Å for all non-H atoms of the two molecules in the asymmetric unit). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.049; wR factor = 0.144; data-to-parameter ratio = 15.9.
The title compound, C20H22O2, crystallizes with two independent molecules in the asymmetric unit. In each molecule, all the non-H atoms lie in a common plane (r.m.s. deviations of 0.098 and 0.079 Å). There is a [pi]-[pi] stacking interaction in the crystal structure. The central aromatic rings of the two molecules, which are stacked head-to-tail one above the other, are separated by centroid-to-centroid distances of 3.872 (13) and 3.999 (10) Å. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 A° ; R factor = 0.044; wR factor = 0.101; data-to-parameter ratio = 14.6.
In the title compound, C11H14O4, an intermediate for the synthesis of a new kind of estrogen receptor modulator, all non-H atoms lie on a common plane (r.m.s. deviation = 0.0472 Å). All C-C bonds in the side chain are in a trans conformation, and the hydroxyl group is also trans to the methylene chain. In the crystal structure, molecules form centrosymmetric dimers showing a head-to-head arrangement which is stabilized by O-H...O hydrogen bonds. A weak C-H...O contact is also present.
9,9-Dimethyl-9-silafluorene
(2009)
The title compound, C14H14Si, crystallizes with two almost identical molecules (r.m.s. deviation = 0.080 Å for all non-H atoms) in the asymmetric unit. All atoms of the silafluorene moiety lie in a common plane (r.m.s. deviations = 0.049 and 0.035 Å for the two molecules in the asymmetric unit). The Si-Cmethyl bonds are significantly shorter [1.865 (4)-1.868 (4) Å] than the Si-Caromatic bonds [1.882 (3)-1.892 (3) Å]. Owing to strain in the five-membered ring, the endocyclic C-Si-C angles are reduced to 91.05 (14) and 91.21 (14)°. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.005 A°; R factor = 0.061; wR factor = 0.157; data-to-parameter ratio = 16.3.
The complete molecule of the title compound, C18H24N2O2, is generated by a crystallographic inversion centre. The torsion angles in the hexamethylene chain are consistent with an antiperiplanar conformation, whereas the conformation of the O—CH2—CH2—CH2 unit is gauche. The three-dimensional crystal packing is stabilized by N—H⋯O and N—H⋯N hydrogen bonding.
The Mg centre in the title compound, [MgBr2(C2H7N)3], is pentacoordinated in a trigonal-bipyramidal mode with the two Br atoms in axial positions and the N atoms of the dimethylamine ligands in equatorial positions. The MgII centre is located on a crystallographic twofold rotation axis. The crystal structure is stabilized by N—H⋯Br hydrogen bonds. The N atom and H atoms of one dimethylamine ligand are disordered over two equally occupied positions.
Modelling protein flexibility and plasticity is computationally challenging but important for understanding the function of biological systems. Furthermore, it has great implications for the prediction of (macro) molecular complex formation. Recently, coarse-grained normal mode approaches have emerged as efficient alternatives for investigating large-scale conformational changes for which more accurate methods like MD simulation are limited due to their computational burden. We have developed a Normal Mode based Simulation (NMSim) approach for efficient conformation generation of macromolecules. Combinations of low energy normal modes are used to guide a simulation pathway, whereas an efficient constraints correction approach is applied to generate stereochemically allowed conformations. Non-covalent bonds like hydrogen bonds and hydrophobic tethers and phi-psi favourable regions are also modelled as constraints. Conformations from our approach were compared with a 10 ns MD trajectory of lysozyme. A 2-D RMSD plot shows a good overlap of conformational space, and rms fluctuations of residues show a correlation coefficient of 0.78 between the two sets of conformations. Furthermore, a comparison of NMSim simulations starting from apo structures of different proteins show that ligand-bound conformations can be sampled for those cases where conformational changes are mainly correlated, e.g., domain-like motion in adenylate kinase. Efforts are currently being made to also model localized but functionally important motions for protein binding pockets and protein-protein interfaces using relevant normal mode selection criteria and implicit rotamer basin creation.
A new method to bridge the gap between ligand and receptor-based methods in virtual screening (VS) is presented. We introduce a structure-derived virtual ligand (VL) model as an extension to a previously published pseudo-ligand technique [1]: LIQUID [2] fuzzy pharmacophore virtual screening is combined with grid-based protein binding site predictions of PocketPicker [3]. This approach might help reduce bias introduced by manual selection of binding site residues and introduces pocket shape information to the VL. It allows for a combination of several protein structure models into a single "fuzzy" VL representation, which can be used to scan screening compound collections for ligand structures with a similar potential pharmacophore. PocketPicker employs an elaborate grid-based scanning procedure to determine buried cavities and depressions on the protein's surface. Potential binding sites are represented by clusters of grid probes characterizing the shape and accessibility of a cavity. A rule-based system is then applied to project reverse pharmacophore types onto the grid probes of a selected pocket. The pocket pharmacophore types are assigned depending on the properties and geometry of the protein residues surrounding the pocket with regard to their relative position towards the grid probes. LIQUID is used to cluster representative pocket probes by their pharmacophore types describing a fuzzy VL model. The VL is encoded in a correlation vector, which can then be compared to a database of pre-calculated ligand models. A retrospective screening using the fuzzy VL and several protein structures was evaluated by ten fold cross-validation with ROC-AUC and BEDROC metrics, obtaining a significant enrichment of actives. Future work will be devoted to prospective screening using a novel protein target of Helicobacter pylori and compounds from commercial providers.
Protein kinases are targets for drug development. Dysregulation of kinase activity leads to various diseases, e.g. cancer, inflammation, diabetes. Human polo-like kinase 1 (Plk1), a serine/threonine kinase, is a cancer-relevant gene and a potential drug target which attracts increasing attention in the field of cancer therapy. Plk1 is a key player in mitosis and modulates entry into mitosis and the spindle checkpoint at the meta-/anaphase transition. Plk1 overexpression is observed in various human tumors, and it is a negative prognostic factor for cancer patients. The same catalytical mechanism and the same co-substrate (ATP) lead to the problem of inhibitor selectivity. A strategy to solve this problem is represented by targeting the inactive conformation of kinases. Kinases undergo conformational changes between active and inactive conformation and thus an additional hydrophobic pocket is created in the inactive conformation where the surrounding amino acids are less conserved. A "homology model" of the inactive conformation of Plk1 was constructed, as the crystal structure in its inactive conformation is unknown. A crystal structure of Aurora A kinase served as template structure. With this homology model a receptor-based pharmacophore search was performed using SYBYL7.3 software. The raw hits were filtered using physico-chemical properties. The resulting hits were docked using Gold3.2 software, and 13 candidates for biological testing were manually selected. Three compounds of the 13 tested exhibit anti-proliferative effects in HeLa cancer cells. The most potent inhibitor, SBE13, was further tested in various other cancer cell lines of different origins and displayed EC50 values between 12 microM and 39 microM. Cancer cells incubated with SBE13 showed induction of apoptosis, detected by PARP (Poly-Adenosyl-Ribose-Polymerase) cleavage, caspase 9 activation and DAPI staining of apoptotic nuclei.
For a virtual screening study, we introduce a combination of machine learning techniques, employing a graph kernel, Gaussian process regression and clustered cross-validation. The aim was to find ligands of peroxisome-proliferator activated receptor gamma (PPAR-y). The receptors in the PPAR family belong to the steroid-thyroid-retinoid superfamily of nuclear receptors and act as transcription factors. They play a role in the regulation of lipid and glucose metabolism in vertebrates and are linked to various human processes and diseases. For this study, we used a dataset of 176 PPAR-y agonists published by Ruecker et al. ...
Two methods for the fast, fragment-based combinatorial molecule assembly were developed. The software COLIBREE® (Combinatorial Library Breeding) generates candidate structures from scratch, based on stochastic optimization [1]. Result structures of a COLIBREE design run are based on a fixed scaffold and variable linkers and side-chains. Linkers representing virtual chemical reactions and side-chain building blocks obtained from pseudo-retrosynthetic dissection of large compound databases are exchanged during optimization. The process of molecule design employs a discrete version of Particle Swarm Optimization (PSO) [2]. Assembled compounds are scored according to their similarity to known reference ligands. Distance to reference molecules is computed in the space of the topological pharmacophore descriptor CATS [3]. In a case study, the approach was applied to the de novo design of potential peroxisome proliferator-activated receptor (PPAR gamma) selective agonists. In a second approach, we developed the formal grammar Reaction-MQL [4] for the in silico representation and application of chemical reactions. Chemical transformation schemes are defined by functional groups participating in known organic reactions. The substructures are specified by the linear Molecular Query Language (MQL) [5]. The developed software package contains a parser for Reaction-MQL-expressions and enables users to design, test and virtually apply chemical reactions. The program has already been used to create combinatorial libraries for virtual screening studies. It was also applied in fragmentation studies with different sets of retrosynthetic reactions and various compound libraries.
There is a renewed interest in pseudoreceptor models which enable computational chemists to bridge the gap of ligand- and receptor-based drug design. We developed a pseudoreceptor model for the histamine H4 receptor (H4R) based on five potent antagonists representing different chemotypes. Here we present the selection of potential ligand binding pockets that occur during molecular dynamics (MD) simulations of a homology-based receptor model. We present a method for prioritizing receptor models according to their match with the consensus ligand-binding mode represented by the pseudoreceptor. In this way, ligand information can be transferred to receptor-based modelling. We use Geometric Hashing to match three-dimensional points in Cartesion space. This allows for the rapid translation- and rotation-free comparison of atom coordinates, which also permits partial matching. The only prerequisite is a hash table, which uses distance triplets as hash keys. Each time a distance triplet occurring in the candidate point set which corresponds to an existing key, the match is represented by a vote of the respective key. Finally, the global match of both point sets can be easily extracted by selection of voted distance triplets. The results revealed a preferred ligand-binding pocket in H4R, which would not have been identified using an unrefined homology model of the protein. The key idea was to rely on ligand information by pseudoreceptor modelling.
We developed the Pharmacophore Alignment Search Tool (PhAST), a text-based technique for rapid hit and lead structure searching in large compound databases. For each molecule, a two-dimensional graph of potential pharmacophoric points (PPPs) is created, which has an identical topology as the original molecule with implicit hydrogen atoms. Each vertex is coloured by a symbol representing the corresponding PPP. The vertices of the graph are canonically labelled. The symbols associated with the vertices are combined to a so-called PhAST-Sequence beginning with the vertex with the lowest canonical label. Due to the canonical labelling the created PhAST-Sequence is characteristic for each molecule. For similarity assessment, PhAST-Sequences are compared using the sequence identity in their global pairwise alignment. The alignment score lies between 0 (no similarity) and 1 (identical PhAST-Sequences). In order to use global pairwise sequence alignment, a score matrix for pharmacophoric symbols was developed and gap penalties were optimized. PhAST performed comparably and sometimes superior to other similarity search tools (CATS2D, MOE pharmacophore quadruples) in retrospective virtual screenings using the COBRA collection of drugs and lead structures. Most importantly, the PhAST alignment technique allows for the computation of significance estimates that help prioritize a virtual hit list.
The representation of small molecules as molecular graphs is a common technique in various fields of cheminformatics. This approach employs abstract descriptions of topology and properties for rapid analyses and comparison. Receptor-based methods in contrast mostly depend on more complex representations impeding simplified analysis and limiting the possibilities of property assignment. In this study we demonstrate that ligand-based methods can be applied to receptor-derived binding site analysis. We introduce the new method PocketGraph that translates representations of binding site volumes into linear graphs and enables the application of graph-based methods to the world of protein pockets. The method uses the PocketPicker algorithm for characterization of binding site volumes and employs a Growing Neural Gas procedure to derive graph representations of pocket topologies. Self-organizing map (SOM) projections revealed a limited number of pocket topologies. We argue that there is only a small set of pocket shapes realized in the known ligand-receptor complexes.
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
The CUG-binding protein 1 (CUG-BP1) is a member of the CUG-BP1 and ETR-like factors (CELF) family or the Bruno-like family and is involved in the control of splicing, translation and mRNA degradation. Several target RNA sequences of CUG-BP1 have been predicted, such as the CUG triplet repeat, the GU-rich sequences and the AU-rich element of nuclear pre-mRNAs and/or cytoplasmic mRNA. CUG-BP1 has three RNA-recognition motifs (RRMs), among which the third RRM (RRM3) can bind to the target RNAs on its own. In this study, we solved the solution structure of the CUG-BP1 RRM3 by hetero-nuclear NMR spectroscopy. The CUG-BP1 RRM3 exhibited a noncanonical RRM fold, with the four-stranded b-sheet surface tightly associated with the N-terminal extension. Furthermore, we determined the solution structure of the CUG-BP1 RRM3 in the complex with (UG)3 RNA, and discovered that the UGU trinucleotide is specifically recognized through extensive stacking interactions and hydrogen bonds within the pocket formed by the b-sheet surface and the N-terminal extension. This study revealed the unique mechanism that enables the CUG-BP1 RRM3 to discriminate the short RNA segment from other sequences, thus providing the molecular basis for the comprehension of the role of the RRM3s in the CELF/Bruno-like family.
Riboswitches are a novel class of genetic control elements that function through the direct interaction of small metabolite molecules with structured RNA elements. The ligand is bound with high specificity and affinity to its RNA target and induces conformational changes of the RNA's secondary and tertiary structure upon binding. To elucidate the molecular basis of the remarkable ligand selectivity and affinity of one of these riboswitches, extensive all-atom molecular dynamics simulations in explicit solvent ({approx}1 µs total simulation length) of the aptamer domain of the guanine sensing riboswitch are performed. The conformational dynamics is studied when the system is bound to its cognate ligand guanine as well as bound to the non-cognate ligand adenine and in its free form. The simulations indicate that residue U51 in the aptamer domain functions as a general docking platform for purine bases, whereas the interactions between C74 and the ligand are crucial for ligand selectivity. These findings either suggest a two-step ligand recognition process, including a general purine binding step and a subsequent selection of the cognate ligand, or hint at different initial interactions of cognate and noncognate ligands with residues of the ligand binding pocket. To explore possible pathways of complex dissociation, various nonequilibrium simulations are performed which account for the first steps of ligand unbinding. The results delineate the minimal set of conformational changes needed for ligand release, suggest two possible pathways for the dissociation reaction, and underline the importance of long-range tertiary contacts for locking the ligand in the complex.
Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.
Shape complementarity is a compulsory condition for molecular recognition. In our 3D ligand-based virtual screening approach called SQUIRREL, we combine shape-based rigid body alignment with fuzzy pharmacophore scoring. Retrospective validation studies demonstrate the superiority of methods which combine both shape and pharmacophore information on the family of peroxisome proliferator-activated receptors (PPARs). We demonstrate the real-life applicability of SQUIRREL by a prospective virtual screening study, where a potent PPARalpha agonist with an EC50 of 44 nM and 100-fold selectivity against PPARgamma has been identified...
The light-harvesting complex of photosystem II (LHC-II) is the major antenna complex in plant photosynthesis. It accounts for roughly 30% of the total protein in plant chloroplasts, which makes it arguably the most abundant membrane protein on Earth, and binds about half of plant chlorophyll (Chl). The complex assembles as a trimer in the thylakoid membrane and binds a total of 54 pigment molecules, including 24 Chl a, 18 Chl b, 6 lutein (Lut), 3 neoxanthin (Neo) and 3 violaxanthin (Vio). LHC-II has five key roles in plant photosynthesis. It: (1) harvests sunlight and transmits excitation energy to the reaction centres of photosystems II and I, (2) regulates the amount of excitation energy reaching each of the two photosystems, (3) has a structural role in the architecture of the photosynthetic supercomplexes, (4) contributes to the tight appression of thylakoid membranes in chloroplast grana, and (5) protects the photosynthetic apparatus from photo damage by non photochemical quenching (NPQ). A major fraction of NPQ is accounted for its energy-dependent component qE. Despite being critical for plant survival and having been studied for decades, the exact details of how excess absorbed light energy is dissipated under qE conditions remain enigmatic. Today it is accepted that qE is regulated by the magnitude of the pH gradient (ΔpH) across the thylakoid membrane. It is also well documented that the drop in pH in the thylakoid lumen during high-light conditions activates the enzyme violaxanthin de-epoxidase (VDE), which converts the carotenoid Vio into zeaxanthin (Zea) as part of the xanthophyll cycle. Additionally, studies with Arabidopsis mutants revealed that the photosystem II subunit PsbS is necessary for qE. How these physiological responses switch LHC-II from the active, energy transmitting to the quenched, energy-dissipating state, in which the solar energy is not transmitted to the photosystems but instead dissipated as heat, remains unclear and is the subject of this thesis. From the results obtained during this doctoral work, five main conclusions can be drawn concerning the mechanism of qE: 1. Substitution of Vio by Zea in LHC-II is not sufficient for efficient dissipation of excess excitation energy. 2. Aggregation quenching of LHC-II does not require Vio, Neo nor a specific Chl pair. 3. With one exception, the pigment structure in LHC-II is rigid. 4. The two X-ray structures of LHC-II show the same energy transmitting state of the complex. 5. Crystalline LHC-II resembles the complex in the thylakoid membrane. Models of the aggregation quenching mechanism in vitro and the qE mechanism in vivo are presented as a corollary of this doctoral work. LHC-II aggregation quenching in vitro is attributed to the formation of energy sinks on the periphery of LHC-II through random interaction with other trimers, free pigments or impurities. A similar but unrelated process is proposed to occur in the thylakoid membrane, by which excess excitation energy is dissipated upon specific interaction between LHC-II and a PsbS monomer carrying Zea. At the end of this thesis, an innovative experimental model for the analysis of all key aspects of qE is proposed in order to finally solve the qE enigma, one of the last unresolved problems in photosynthesis research.