Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
At sufficiently high temperatures and baryon densities, nuclear matter is expected to undergo a transition into the Quark-Gluon-Plasma (QGP) consisting of deconfined quarks and gluons and accompanied by chiral symmetry restoration. Signals of these two fundamental characteristics of Quantum-Chromo-Dynamics (QCD) can be studied in ultra-relativistic heavy-ion collisions producing a relatively large volume of high energy and nucleon densities as existent in the early universe. Dileptons are unique bulk-penetrating sources for this purpose since they penetrate through the surrounding medium with negligible interaction and are created throughout the entire evolution of the initially created fireball. A multitude of experiments at SIS18, SPS and RHIC have taken on the challenging task to measure these rare probes in a heavy-ion environment. NA60's results from high-quality dimuon measurements have identified the broadened ρ spectral function as favorable scenario to explain the low-mass dilepton excess, and partonic sources as dominant at intermediate dilepton masses.
Enabled by the addition of a TOF detector system in 2010, the first phase of the Beam Energy Scan (BES-I) at RHIC allows STAR to conduct an unprecedented energy-dependent study of dielectron production within a homogeneous experimental environment, and hence close the wide gap in the QCD phase diagram between SPS and top RHIC energies. This thesis concentrates on the understanding of the LMR enhancement regarding its invariant mass, transverse momentum and energy dependence. It studies dielectron production in Au+Au collisions at beam energies of 19.6, 27, 39, and 62.4 GeV with sufficient statistics. In conjunction with the published STAR results at top RHIC energy, this thesis presents results on the first comprehensive energy-dependent study of dielectron production.
This includes invariant mass- and transverse momenta-spectra for the four beam energies measured in 0-80% minimum-bias Au+Au collisions with high statistics up to 3.5 GeV/c² and 2.2 GeV/c, respectively. Their comparison with cocktail simulations of hadronic sources reveals a sizeable and steadily increasing excess yield in the LMR at all beam energies. The scenario of broadened in-medium ρ spectral functions proves to not only serve well as dominating underlying source but also to be universal in nature since it quantitatively and qualitatively explains the LMR enhancements measured over the wide range from SPS to top RHIC energies. It shows that most of the enhancement is governed by interactions of the ρ meson with thermal resonance excitations in the late(r)-stage hot and dense hadronic phase. This conclusion is supported by the energy-dependent measurement of integrated LMR excess yields and enhancement factors. The former do not exhibit a strong dependence on beam energy as expected from the approximately constant total baryon density above 20 GeV, and the latter show agreement with the CERES measurement at SPS energy. The consistency in excess yields and agreement with model calculations over the wide RHIC energy regime makes a strong case for LMR enhancements on the order of a factor 2-3.
The extent of the results presented here enables a more solid discussion of its relation to chiral symmetry restoration from a theoretical point of view. High-statistics measurements at BES-II hold the promise to confirm these conclusions along with the LMR enhancment's relation to total baryon density with decreasing beam energy.
This thesis has two main parts.
The first part is based on our publication [1], where we use perturbation theory to calculate decay rates of magnons in the Kitaev-Heisenberg-Γ (KHΓ) model. This model describes the magnetic properties of the material α-RuCl 3 , which is a candidate for a Kitaev spin liquid. Our motivation is to validate a previous calculation from Ref. [2]. In this thesis, we map out the classical phase diagram of the KHΓ model. We use the Holstein-Primakoff
transformation and the 1/S expansion to describe the low temperature dynamics of the Kitaev-Heisenberg-Γ model in the experimentally relevant zigzag phase by spin waves. By parametrizing the spin waves in terms of hermitian fields, we find a special parameter region within the KHΓ model where the analytical expressions simplify. This enables us to construct the Bogoliubov transformation analytically. For a representative point in the special parameter region, we use these results to numerically calculate the magnon damping, which is to leading order caused by the decay of single magnons into two. We also calculate the dynamical structure factor of the magnons.
The second part of this thesis is based on our publication [3], where we use the functional renormalization group to analyze a discontinuous quantum phase transition towards a non-Fermi liquid phase in the Sachdev-Ye-Kitaev (SYK) model. In this thesis, we perform a disorder average over the random interactions in the SYK model. We argue that in the thermodynamic limit, the average renormalization group (RG) flow of the SYK model is identical to the RG flow of an effective disorder averaged model. Using the functional RG, we find a fixed point describing the discontinuous phase transition to the non-Fermi liquid phase at zero temperature. Surprisingly, we find a finite anomalous dimension of the fermions, which indicates critical fluctuations and is unusual for a discontinuous transition. We also determine the RG flow at zero temperature, and relate it to the phase diagram known from the literature.
Breitbandige Beamforming-Algorithmen zur Erfassung von Audiosignalen mit kompakten Mikrofon-Arrays
(2009)
Mikrofon-Arrays erlauben die selektive Erfassung und Trennung von Audiosignalen aus einer akustischen Umgebung. Typische Anwendungen sind z.B. die Ortung einzelner Schallquellen, die räumliche Kartierung eines Schallfeldes ("akustische Kamera") oder der gerichtete Empfang einer bestimmten Schallquelle bei gleichzeitiger Unterdrückung von Umgebungs- oder Störschallen. Vielkanalige Verfahren und Filter, die sich dieser Aufgabe widmen, werden als Beamforming bzw. Beamformer bezeichnet. In dieser Dissertation werden bekannte und eigene Beamforming-Ansätze im Hinblick auf ihre Eignung für die hochwertige Übertragung von Audiosignalen untersucht. Diese erfordert neben einer möglichst großen Abdeckung des relevanten Frequenzbereichs (Breitbandigkeit) auch die Frequenzunabhängigkeit der Richtcharakteristik, um spektrale Verzerrungen zu vermeiden. Es wird ein Algorithmus vorgestellt, der diese Anforderungen mit sehr kompakten Arrays erfüllt. Eine klassische Möglichkeit, eine frequenzinvariante Charakteristik (Beampattern) mithilfe eines Delay-and-Sum-Beamformers zu erhalten, ist eine frequenzabhängige Gewichtung der Mikrofone, welche die effektive Apertur des Arrays proportional zur Schallwellenlänge einstellt. Diese Methode funktioniert jedoch nur bei Wellenlängen, die kleiner sind als die Ausdehnung des Arrays, und erfordert bei Frequenzen unter 100Hz Arrays von mehreren Metern Größe. Ein gänzlich anderes Verhalten zeigen differentielle Mikrofonarrays, welche Differenzen aus Signalen benachbarter Mikrofone bilden: In Kombination mit Integratorfiltern erzeugen sie Beampattern, die auch bei sehr kleinen Frequenzen, d.h. bei Wellenlängen, die groß gegen das Array sind, unverändert bleiben (sog. Superdirektivität). Aus diesem Prinzip wurde in dieser Arbeit das Konzept des Multipol-Beamformers entwickelt, der ein gegebenes Soll-Beampattern durch eine Reihenentwicklung nach Sinus- und Kosinusfunktionen (zweidimensionaler Fall) oder Kugelflächenfunktionen (dreidimensionaler Fall) approximiert. Der Multipol-Beamformer erzielt eine hervorragende Richtwirkung bei kleinen Frequenzen, ist jedoch nur über einen sehr begrenzten Bereich frequenzinvariant und erweist sich insbesondere in drei Raumdimensionen als analytisch aufwändig. Flexibler und in zwei wie in drei Raumdimensionen gleichermaßen einfach in der Formulierung ist demgegenüber das in der Literatur zu findende Verfahren des modalen Subraum-Beamformings (Modal Subspace Decomposition, MSD). Dieser Ansatz bestimmt zu einer beliebigen Sensorgeometrie einen Satz orthogonaler Eigen-Beampattern, die dann zu einer Reihenentwicklung des Soll-Beampatterns herangezogen werden. Ähnlich dem erwähnten Delay-and-Sum-Beamformer jedoch erfordert auch dieser Ansatz bei großen Wellenlängen entsprechend groß dimensionierte Arrays und ist nicht superdirektiv. In dieser Arbeit wurde deshalb eine eigene, neue Ausprägung des MSD-Algorithmus formuliert, welche die Superdirektivität des Multipol-Beamformers mit der Flexibilität und Einfachheit des MSD-Verfahrens vereint. Diese als "superdirektives MSD-Beamforming" bezeichnete Methode besitzt - wie das bereits bekannte MSD-Verfahren auch - die interessante Eigenschaft, daß die Eigen-Beampattern für ein frei zu wählendes Entwurfs-Frequenzband berechnet werden, so daß das Verhalten des Beamformers über ein ganzes Frequenzintervall kontrolliert werden kann. Dies eröffnet auch die Möglichkeit eines sehr breitbandigen Beamformings durch Kombination mehrerer Beamformer, die individuell auf benachbarte Frequenzbänder abgestimmt werden. Mit beispielsweise einem hexagonalen Array von nur 6cm Durchmesser und sieben Mikrofonen erreicht der superdirektive Ansatz so ca. 20-30dB Störabstand über einen Frequenzbereich von 100Hz bis 6kHz, was für Sprache eine sehr hohe Übertragungsqualität darstellt. Zur experimentellen Verifikation der untersuchten Algorithmen wurde im Rahmen dieser Arbeit eine vielkanalige Echtzeit-Signalverarbeitungsumgebung unter Windows XP erstellt, welche die Erfassung, Verarbeitung, Analyse und Ausgabe vielkanaliger Audio-Daten erlaubt. Auch eine Simulation idealer Freifeldmessungen an Mikrofonarrays ist damit möglich, indem die Ausbreitung des Schalls von der Schallquelle zu den Mikrofonen durch zeitdiskrete Fractional-Delay-Filter simuliert wird. Dieser Filtertypus wurden im Rahmen dieser Arbeit ebenfalls eingehend untersucht: Für zwei aus der Literatur bekannte Entwurfsverfahren wurden Erweiterungen gefunden, die bei gleicher Filterordnung eine höhere nutzbare Bandbreite erzielen. Für Messungen an realen Arrays wurde die Akustik-Messkammer des Instituts durch zusätzliche Dämmauskleidung für Freifeld-Messungen nutzbar gemacht. Die Messergebnisse belegen, daß die untersuchten Algorithmen in der Praxis erwartungsgemäß funktionieren und daß der gefundene superdirektive MSD-Algorithmus mit sehr kompakten Arrays eine gute breitbandige Erfassung und Trennung von Audiosignalen ermöglicht.
Results were presented from Brownian dynamics simulations for cyt c molecules approximated as spherical particles with diameter 2R ' 3.3 nm interacting with a charged planar membrane surface. Using the well-known Ermak-McCammon algorithm of ref. [36, 37] for solving the Langevin equations (see Chapter 2), a new computer program in C++ was developed. An overview of the way it is implemented is given in Chapter 3. The program in its current state is able to compute the trajectories (translation and rotation) of hundreds of spherical particles in systems with typical dimensions of 103 − 1003 nm3 . As explained in the introductory Chapter 1 the motivation for studying the dynamics of cyt c molecules in such systems came from the progress in the research of photosynthetic bacteria, e.g. While the internal processes of energy transduction (light harvesting, channelling to RC, charge separation) are quite well understood, the dynamics of soluble cyt c as an electron transporter in this context is not yet clear. In many textbooks one can find illustrations where a single cyt c is responsible for the electron transport between two integral membrane proteins (the reaction centre RC and the bc1 complex). But as pointed out in publications like refs. [49], [59], [60], [61] or [62] biological cells are crowded with different molecules. Consequently, one can assume that the electron transport between two integral membrane proteins is not simply taken on by one single cyt c molecule. Instead it is likely that many of these particles are located in a cyt c pool above the membrane and that they perform the electron transport in turns. Thus, it is desirable to have a simulation package that is able to compute the trajectories of many proteins. Note that the detailed processes of electron transfer and binding to membrane proteins are not modelled here. The details of these processes are quite complicated so that we refrained from including them in the coarse-grained simulations. Here, the actual binding is simply defined by a particle distance zb from the membrane which marks the beginning of the attractive potential. ...
The bulk viscosity of several quark matter phases is calculated. It is found that the effect of color superconductivity is not trivial, it may suppress, or enhance the bulk viscosity depending on the critical temperature and the temperature at which the bulk viscosity is calculated. Also, is it found that the effect of neutrino-emitting Urca processes cannot be neglected in the consideration of the bulk viscosity of strange quark matter. The results for the bulk viscosity of strange quark matter are used to calculate the r-mode instability window of quark stars with several possible phases. It is shown that each possible phase has a different structure for the r-mode instability window.
This Ph. D. thesis with the title "Characterisation of laser-driven radiation beams: Gamma-ray dosimetry and Monte Carlo simulations of optimised target geometry for record-breaking efficiency of MeV gamma-sources" is dedicated to the study of the acceleration of electrons by intense sub-picosecond laser pulses propagating in a sub-millimeter plasma with near-critical electron density (NCD) and resulting generation of the gamma bremsstrahlung and positrons in the targets of different materials and thickness.
Laser-driven particle acceleration is an area of increasing scientific interest since the recent development of short pulse, high-intensity laser systems. The interaction of intense high-energy, short-pulse lasers with solid targets leads to the production of high-energy electrons in the relativistic laser intensity regime of more than 1018 W /cm2. These electrons play the leading role in the first stage of the interaction of laser with matter, which leads to the creation of laser sources of particles and radiation. Therefore, the optimisation of the electron beam parameters in the direction of increasing the effective temperature and beam charge, together with a slight divergence, plays a decisive role, especially for further detection and characterisation of laser-driven photon and positron beams.
In the context of this work, experiments were carried out at the PHELIX laser system (Petawatt High-Energy Laser for Heavy Ion eXperiments) at GSI Helmholtz Center for Heavy-Ion Research GmbH in Darmstadt, Germany. This thesis presents a thermoluminescence dosimetry (TLD) based method for the measurement of bremsstrahlung spectra in the energy range from 30 keV to 100 MeV. The results of the TLD measurements reinforced the observed tendency towards the strong increase of the mean electron energy and number of super-ponderomotive electrons. In the case of laser interaction with long-scale NCD-plasmas, the dose caused by the gamma-radiation measured in the direction of the laser pulse propagation showed a 1000-fold increase compared to the high contrast shots onto plane foils and doses measured perpendicular to the laser propagation direction for all used combinations of targets and laser parameters.
In this thesis I present novel characterisation method using a combination of TLD measurements and Monte Carlo FLUKA simulations applicable to laser-driven beams. The thermoluminescence detector-based spectrometry method for simultaneous detection of electrons and photons from relativistic laser-induced plasmas initially developed by Behrens et al. (Behrens et al., 2003) and further applied in experiments at PHELIX laser (Horst et al., 2015) delivered good spectral information from keV energies up to some MeV, but as it was presented in (Horst et al., 2015) this method was not really suitable to resolve the content of photon spectra above 10 MeV because of the dominant presence of electrons. Therefore, I created new evaluation method of the incident electron spectra from the readings of TLDs. For this purpose, by means of MatLab programming language an unfolding algorithm was written. It was based on a sequential enumeration of matching data series of the dose values measured by the dosimeters and calculated with of FLUKA-simulations. The significant advantage of this method is the ability to obtain the spectrum of incident electrons in the low energy range from 1 keV, which is very difficult to measure reliably using traditional electron spectrometers.
The results of the evaluation of the effective temperature of super-ponderomotive electrons retrieved from the measured TLD-doses by means of the Monte-Carlo simulations demonstrated, that application of low density polymer foam layers irradiated by the relativistic sub-ps laser pulse provided a strong increase of the electron effective temperature from 1.5 - 2 MeV in the case of the relativistic laser interaction with a metallic foil up to 13 MeV for the laser shots onto the pre-ionized foam and more than 10 times higher charge carried by relativistic electrons.
The progressive simulation method of whole electron spectra described with two -temperatures Maxwellian distribution function has been developed and the results of dose simulations were compared with the acquired experimental data. The advanced feature of this method, which distinguishes it from the results of the simulation of the photon spectrum using the interaction with the target of mono-energetic electron beams (Nilgün Demir, 2013; Nilgün Demir, 2019) or the initial electron spectrum expressed as a function of one electron temperature (Fiorini, 2012), is the ability to simulate the initial electron spectrum described by the Maxwellian distribution function with two temperatures.
The important objective of this thesis was dedicated to the study and characterisation of laser-driven photon beams. In addition to this, the positron beams were evaluated. The investigation of bremsstrahlung photons and positrons spectra from high Z targets by varying the target thickness from 10 µm to 4 mm in simulated models of the interactions of electron spectra with Maxwellian distribution functions allowed to define an optimal thickness when the fluences of photons and positrons are maximal. Furthermore based on the results of FLUKA simulations the gold material was found to be the most suitable for the future experiments as e − γ target because of its highest bremsstrahlung yield.
Additionally Monte Carlo simulations were performed applying the obtained electron beam parameters from the electron acceleration process in laser-plasma interactions simulated with particle-in-cell (PIC) code for two laser energies of 20 J and 200 J. The corresponding electron spectra were imported into a Monte Carlo code FLUKA to simulate the production process of bremsstrahlung photons and positrons in Au converter. FLUKA simulations showed the record conversion of efficiency in MeV gammas can reach 10%, which reinforces the generation of positrons. The obtained results demonstrate the advantages of long-scale plasmas of near critical density (NCD) to increase the parameters of MeV particles and photon beams generated in relativistic laser-plasma interaction. The efficiency of the laser-driven generation of MeV electrons and photons by application of low-density polymer foams is essentially enhanced.
Die vorliegende Arbeit beschäftigt sich mit der Charakterisierung des ALTRO Chips (ALICE TPC Readout), der ein integraler und wichtiger Bestandteil der Auslesekette des TPC (Time Projection Chamber) Detektors von ALICE (A Large Ion Collider Experiment) ist. ALICE ist ein Experiment am noch im Bau befindlichen LHC (Large Hadron Collider) am CERN mit der zentralen Ausrichtung, Schwerionenkollisionen zu untersuchen. Diese sind von besonderem Interesse, da durch sie ein experimenteller Zugriff zu dem QGP (Quark Gluon Plasma) existiert, dem einzigen vom Standardmodell vorhergesagten Phasenübergang, der unter Laborbedingungen erreichbar ist. Im Jahr 2004 wurden Messungen an einem Teststrahl am CERN PS (Proton Synchrotron) durchgeführt. Der Prototyp wurde voll mit FECs bestückt, was 5400 Kanälen entspricht und einer anderen Gasmixtur (Ne/N2/CO2 90%/5%/5%) befüllt. Für das optimale Leistungsverhalten der ALICE TPC muß der Digitalprozessor im ALTRO, bestehend aus vier Berechnungseinheiten, mit den passenden Werten konfiguriert werden. Der Datenfluss beginnt mit dem BCS1 (Baseline Correction and Subtraction 1) Modul, das systematische Störungen und die Grundlinie entfernt. Da der ALTRO kontinuierlich das anliegende Signal abtastet, entfernt es automatisch langsame Grundlinienveränderungen, die Beispielsweise durch Temperaturänderungen auftreten können. Gefolgt von dem TCF (Tail Cancellation Filter), der den Schweif des langsam fallenden, vom PASA generierten Signals entfernt. Um die nichtsystematischen Störungen der Grundlinie zu entfernen, folgt die BCS2 (Baseline Correction and Subtraction 2), die auf einer gleitenden Mittelwertsberechnung mit Ausschluß von Detektorsignalen über einen doppelten Schwellenwert basiert. Die finale Einheit für die Signalverarbeitung ist die ZSU (Zero Suppression Unit), die Meßpunkte unterhalb eines definierten Schwellwertes entfernt. Hier wird der weg beschrieben die TCF und BCS1 Parameter aus vorhandenen Detektordaten zu extrahieren. Während der Analyse der Daten von kosmischen Teilchen fiel bei Signalen mit hoher Amplitude (>700 ADC) eine zusätzliche Struktur in dem Schweif auf. Der Monitor wurde deswegen mit einem gleitenden Mittelwertfilter erweitert, worauf sich diese Struktur auch in kleineren Signalen (> 200 ADC) zeigte. Dieses Signal wird von Ionen erzeugt, die zur Kathode oder zu den Pads driften, bisher ist jedoch weder die Streuung der Elektronenlawine an der Anode, noch die Variationsbreite in den erzeugten Elektronlawinen verstanden oder gemessen worden. Eine erfolgreiche Messung, sowie Charakterisierung wird in dieser Arbeit beschrieben. Im Jahr 2005 im Sommer beginnt der Einbau der Gaskammern der TPC in ALICE, die Elektronik folgt am Ende dieses Jahres. Parallel hierzu wurde der Prototyp der TPC wieder in Betrieb genommen und im Frühling wird ein kompletter Sektor mit der Detektorelektronik ausgestattet. An diesen zwei Aufbauten wird die ALTRO Charakterisierung fortgeführt, verfeinert und komplettiert.
The Compressed Baryonic Matter (CBM) experiment will explore the phase diagram of strongly interacting matter in the region of high net baryonic densities. The matter at these extreme conditions will be produced and studied in heavy-ion collisions with a fixed target set-up.
The present work is dedicated to the main component of the CBM experiment - the Silicon Tracking System (STS). The STS comprises of 8 tracking stations with 1292 double sided silicon microstrip sensors. The STS has to enable the reconstruction of up to 1000 charged particle tracks per nucleus-nucleus interaction at the rate of up to 10 MHz, provide a momentum resolution of Δp/p =1%, and withstand the radiation load of up to 1 x 1014 neq/cm2 (neq — radiation dose of 1 MeV neutron equivalent). Self-triggering read-out electronics will be located on the periphery of the detecting planes, and connected to the sensors with low mass micro-cables.
During the R&D phase, as well as in the pre-series and series production phase, the characterization of the sensors, of the front-end electronics and of the complete detector modules has to be performed. It is evident that characterization of more than 1000 silicon microstrip sensors and later of complete detector modules is very time-consuming, and may even damage the objects if not performed carefully. One of the goals of this work was to develop a systematic procedure for the quality assurance for the double-sided silicon microstrip sensors. This includes static optical inspection and visual tests, passive electrical test (such as leakage current, bulk capacitance, inter-strip capacitance & resistances, bias resistance and coupling capacitance), radiation hardness and long-term stability. A strategy for the quality assurance of these sensors is presented, defining the various tests to be performed and the documentation of the results. The techniques and quality assurance criteria will be applied for the pre-series and series production.
With decreasing feature size and increase in functionality and structures, the classical mechanical probe approach for internal fault detection and functional testing faces increasing challenges. In the field of silicon based chips and sensors there is rarely any analysis on the topic of non-invasive or contact-less probing and characterization, despite the fact that the contact-less probing is becoming more and more important as the fabrication technologies become smaller and more susceptible to the parasitic impact of mechanical probes. The silicon micro-strip double sided sensors used in STS have a complex structure, such as 1024 metal electrodes, 2048 bias resistors, 2048 DC pads and 4098 AC pads for probing, several guard rings, and even more in the 6.2 cm x 6.2 cm prototype sensor. Photo-intrusive technique is the best solution for the characterization and investigation of crucial parameters related to the detector operation and its functionality. A photo-intrusive probing is a method in which a non-invasive pulsed laser of a desired wavelength is used to inject the photon into the bulk and resulting in electron-hole pairs (e-h). In a completely depleted silicon sensor the charge injected (or generated) by the pulsed laser beam could be detected as current and shall be used for characterization.
A non-invasive contact-less Laser Test System (LTS) was developed based on a pulsed laser to investigate properties of the silicon sensors. The set-up is able to inject charge locally and scan sensors(or detector modules) with a pulsed infra-red laser driven by a step motor. The LTS is designed to measure sensor response in an automatized procedure at several thousand positions across the sensor with focused infra-
red laser light (spot size = 12 μm , wavelength = 1060 nm). The duration (10 ns) and power (5 mW) of the laser pulses are selected such that the absorption of the laser light in the 300 μm thick silicon sensors produces a number of about 24000 electrons, which is similar to the charge created by the minimum ionizing particles (MIP) in these sensors. The set-up was used to developed characterization procedures to determine the charge sharing between strips, and to measure a qualitative uniformity of the sensor response over the whole active area. The prototype sensors which are tested with the set-up are small prototype sensors (256 strips, pitch = 50 μm on each side) and full-size detector modules (1024 strips/side and pitch = 58 μm). They are read-out using a self-triggering prototype read-out electronic ASIC called n-XYTER. Laser scans for amplitude response, charge sharing in the inter-strip region, and spot-size determination technique are reported. For the verification of the some design parameters, unique methods of determining coupling capacitance, and inter-strip capacitance have been developed. The modules were also tested with proton beams, and the charge sharing in the inter-strip region has been compared to the laser test results.
High-energetic heavy-ion collisions offer the unique opportunity to produce and to study dense nuclear matter in the laboratory. The future Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany, will provide beams of heavy nuclei up to kinetic energies of 11 GeV/nucleon. At these energies, the nuclear matter in the collision zone of two nuclei will be compressed to densities of up to 5 − 10 times the saturation density of atomic nuclei, similar to matter densities existing in the core of massive neutron stars. Under those conditions, nucleons are expected to melt and form a new state of matter, which consists of quarks and gluons, the so called Quark-Gluon Plasma (QGP). The search for such a phase transition from hadronic to partonic matter, and the exploration of the nuclear matter equation-of-state at high densities are the major goals of heavy ion experiments worldwide.
The observables, which are proposed to probe the properties of dense nuclear matter and possible phase transitions, include multi-strange hyperons, antibaryons, lepton pairs, collective flow of identified particles, fluctuations and correlations of various particles, particles containing charm quarks, and hypernuclei. These observables have to be measured in multi-dimensions, i.e. as function of collision centrality, rapidity, transverse momentum, energy, emission angle, etc., which requires extremely high statistics. Moreover, some of these particles are produced very rarely.
Therefore, the Compressed Baryonic Matter (CBM) experiment at FAIR is designed to run at collision rates of up to 10 MHz, in order to perform measurements with unprecedented precision. Due to the complicated decay topology of many observables, no hardware trigger can be applied, and the data have to be analysed online in order to filter out the interesting events.
This strategy requires free-streaming read-out electronics, which provides time stamps to all detector signals, a high performance computer center, and high-speed reconstruction algorithms, which provide an online track and event reconstruction based on time and position information of the detector hits (”4-D“ reconstruction).
The core detector of the CBM experiment is the Silicon Tracking System (STS). The main task of the STS is to provide track reconstruction and momentum de- termination of charged particles originating from beam-target interactions. To fulfil the whole tasks the STS is located in the large gap of a superconducting dipole magnet with a bending power of 1 Tm providing momentum measurements for charged particles. The STS comprises 8 detector stations, which are positioned from 30 cm to 100 cm downstream the target. The corresponding active area of the stations grows up from 40×50 cm 2 up to 100×100 cm 2 with a totalarea of 4 m2. The silicon double-sided sensors exhibit 1024 strips on each side with a stereo angle at p-side of 7.5 ◦ and a strip pitch of 58 μm. The strip length ranges from 2 cm for sensors located in a close vicinity to the beam axis, up to 12 cm for other sensors where the flux of the reaction products drops down substantially. In total, the STS consist of 896 sensors mounted on 106 detector ladders. The detector readout electronics dissipates 40 kW and will be equipped with a CO 2 bi-phase cooling system. The detector including electronics will be mounted in a thermal enclosure to allow for sensor operation at below −5 ◦ C which minimizes radiation induced leakage currents.
The task of the STS is to measure the trajectories of up to 800 charged particles per collision with an efficiency of more than 95% and a momentum resolution of 1 − 2%. In order to guarantee the required performance over the full lifetime of the CBM experiment, the detector system has to have a low material budget, a high granularity, a high signal-to-noise (SNR) ratio, and a high radiation tolerance. As a result of optimisation studies, the STS consists of double-sided silicon microstrip sensors, about 300 μm thick, which have to provide a SNR ratio of more than 10, even after radiation with the expected equivalent lifetime fluence of 10 14 1 MeV n eq cm −2.
This thesis is devoted to the characterization of double-sided silicon microstrip sensors with an emphasis on investigation of their radiation hardness. Different prototypes of double sided silicon sensors produced by two vendors have been irradiated by 23 MeV protons up to the double life time fluence for the CBM experiment (2 × 10 14 1 MeV n eq cm −2 ).
The sensor properties have been characterised before and after irradiation. It was found, that after irradiation with a double lifetime fluence the leakage current increased 1000 times, which results in an increased shot noise. Moreover, the relative charge collection efficiency of irradiated with respect to non-irradiated sensors drops down to 85% for the lifetime equivalent fluence, and down to 73% for the double lifetime fluence, both for the p-side and n-side. For non-irradiated sensors the SNR was found to be in the range of 20 − 25, whereas for irradiated sensors it dropped down to 12 − 17.
In addition to the sensor characterization, a part of this thesis was devoted to the optimisation of the sensor readout scheme. In order to investigate the possible increase of SNR, and to reduce the number of readout channels in the outer aperture of STS, three versions of routing lines have been realized for the p-side readout of the sensor prototype, and have been tested in the laboratory and under beam conditions.
The tests have been performed with different inclination angles between beam direction and sensor surface, corresponding to the polar angle acceptance of the CBM experiment, which is from 2.5 ◦ to 25 ◦.
As a result of the studies carried out in this thesis work, the radiation hardness of the double-sided silicon microstrip sensors developed for the CBM STS detector was confirmed. Also the advantage of individual read-out of sensor channels in the lateral regions of the detector was verified. This allowed to start the tendering process for sensor series production in industry, an important step towards the construction of the detector in the coming years.
In dieser Arbeit wurden zwei Systeme der biologischen Energiewandlung mit verschiedenen spektroskopischen Methoden untersucht und es wurden neue Erkenntnisse über die Funktion und Aktivierung der Proteine Proteorhodopsin und RuBisCO gewonnen. Zusätzlich konnte eine neue methodische Herangehensweise zur Untersuchung von Carboxylierungsreaktionen etabliert werden. Dieser Ansatz bietet in Zukunft breite Anwendungsmöglichkeiten zur Studie dieser biologisch so bedeutenden Reaktionsklasse. Mit Hilfe der Infrarotspektroskopie und vor allem durch den Einsatz von Tieftemperaturmessungen konnte der bisher kontrovers diskutierte Photozyklus von Proteorhodopsin (PR) eingehend charakterisiert werden. Jenseits des gut verstandenen aktiven Transports bei pH 9,0 wurde vor allem der pH 5,1 Photozyklus untersucht. Erstmals konnte auch in Infrarotspektren das M-Intermediat bei pH 5,1 nachgewiesen werden. Dieses Intermediat ist von entscheidender Bedeutung für den aktiven Transport über die Zellmembran und seine Existenz wurde bisher vielfach angezweifelt. Zudem konnte Glu-108 als ein möglicher Protonenakzeptor des Photozyklus bei pH 5,1 identifiziert werden. Durch einen pH-Indikator ließ sich der Nachweis erbringen, dass auch im sauren pH-Bereich Protonen freigesetzt werden. Damit steht fest, dass ein aktiver Protonentransport bei pH 5,1 möglich ist. Zusammen mit Informationen zu protonierbaren Aminosäureseitenketten (vornehmlich Asp und Glu) lässt sich zudem mit Einschränkungen die These unterstützen, dass PR ober- und unterhalb des pKa-Werts von Asp-97 in verschiedene Richtungen Protonen pumpt. Damit ergibt sich ein differenziertes Bild für den pH-abhängigen Photozyklus von PR mit drei pH-Bereichen (pH 9,0, 8,5 bis 5,5 und 5,1) in denen PR unterschiedliche Protonentransportwege zeigt. Als weiteres biologischen System wurde RuBisCO genauer untersucht. Im Fokus der Arbeit war dabei die Aktivierung durch die Bildung eines Lysin-Carbamats im aktiven Zentrum. Obwohl RuBisCO das am häufigsten vorkommende Enzym unseres Planeten ist, in der Kohlenstofffixierung eine bedeutende Rolle spielt und obwohl mehrere Dutzend Kristallstrukturen existieren, gibt es noch immer genügend offene Fragen zur Aktivierung. Mit Hilfe eines Käfig-CO2 konnte die Carbamatbildung im Enzym direkt verfolgt und der Einfluss von Magnesiumionen auf die Aktivierung beobachtet werden. Damit ließ sich ganz klar ausschließen, dass Magnesium bereits für die Carbamatbildung erforderlich ist. Die Koordination von Mg2+ ist erst für die Endiol-Bildung im weiteren Reaktionszyklus essentiell. Zusätzlich wurde gezeigt, dass Azid eine Inhibierung des Enzyms durch die Konkurrenz mit CO2 um die Bindungsstelle auslöst, allerdings verdrängt CO2 das Azidion im Laufe der Zeit. Mit den Ergebnissen für RuBisCO konnte klar gezeigt werden, dass die Kombination aus Käfig-CO2 und Rapid-Scan IR-Spektroskopie ein völlig neues Feld für die Untersuchung von Carboxylierungsreaktionen eröffnet. Gerade die offenen Fragen zu Biotin bindenden Carboxylasen bieten ein breites Anwendungsgebiet für diese Methodik.
Motiviert durch aktuelle atomphysikalische Fragestellungen zur Struktur und Dynamik der Materie im Bereich hochgeladener Schwerionen entstand der Bedarf zur Weiterentwicklung bestehender und zur Entwicklung neuartiger ortsauflösender Detektorsysteme. Die Untersuchung der Struktur ist hauptsächlich durch die hochauflösende spektroskopische Vermessung einzelner Energieniveaus der atomaren Hülle bestimmt und liefert grundlegende Einblicke in den atomaren Aufbau. Dabei stellen diese Resultate gerade bei schweren hochgeladenen Ionen eine exzellente Testmöglichkeit der QED in extrem starken Feldern dar. Die Dynamik der Materie zeigt sich in der Teilchendynamik (hier der Atomhülle) in extrem starken und extrem kurzen elektromagnetischen Feldern, wie sie bei Ion-Atom-Stößen auftreten. Beobachtet werden können hier vor allem Teilchen und Photonen-Polarisationsphänomene. Solche Polarisationseffekte sind jedoch nicht auf das Gebiet der atomaren Hülle beschränkt. Als ein Beispiel sei die Untersuchung laserbeschleunigter Teilchen genannt. Hier kann die Polarimetrie von Röntgenstrahlung, die durch Thomson-Streuung optischer Photonen an den zuvor auf relativistische Geschwindigkeiten beschleunigten Teilchen erzeugt wird, Aufschluß über die Natur des Beschleunigungsprozesses geben. Einblick in die lineare Polarisation der Röntgenphotonen im für unsere Arbeit interessanten Energiebereich von einigen 10 keV bis einigen 100 keV können mit Compton-Polarimetern gewonnen werden. Kommerziell sind Detektorsysteme, die eine ausreichende Granularität in Kombination mit hinreichender Detektordicke besitzen, um hohe Nachweiseffizienzen zu erreichen, jedoch nicht verfügbar. Im Rahmen der vorgelegten Arbeit, die sich mit Techniken der hochaufgelösten Röntgenspektroskopie und der Röntgenpolarimetrie an hochgeladenen Schwerionen befasst, wurden vielfältige Arbeiten an und mit orts-, zeit- und energieauflösenden planaren Ge(i)-Detektorsystemen durchgeführt. Wesentliches Ziel der Arbeit war es, ein zweidimensional ortsauflösendes planares Halbleiterdetektorsystem, das für den Einsatz im Kristallspektrometer FOCAL und als Compton-Polarimeter angepasst ist, bereitzustellen. Hierzu wurde ein 2D-µ-Streifendetektorsystem aufgebaut, das eine Ortsauflösung von 250µm, bzw. 1167µm in orthogonaler Richtung, bei einer Detektordicke von 11mm und eine Energieauflösung von etwa 2 keV für jeden einzelnen Streifen bei 60 keV Photonenenergie gewährleistet. Durch Messungen an der Synchrotronquelle ESRF, Grenoble (Frankreich), wurde die Eignung des Systems als bildgebendes Element im FOCAL Kristallspektrometer bei einer Photonenenergie von 60 keV und als Compton-Polarimeter bei einer Photonenenergie von 210 keV untersucht. Der große Vorteil in FOCAL ein ortsauflösendes Detektorsystem einzusetzen, liegt darin, dass alle interessanten Beugungswinkel simultan beobachtet werden können. Im herkömmlichen Ansatz würde man mit einer einfachen Diode und einem Kollimator den Bereich abfahren. Wegen der geringen Ereignisrate und dem hohen Untergrund ist dies jedoch nicht praktikabel. Herkömmliche Systeme wie CCD oder Gasdetektoren haben nicht die nötige Effizienz oder eine zu hohe Dunkelrate. Zur Untersuchung der für FOCAL wichtigen Eigenschaften wurden mehrere Positionen auf dem Detektor bei niedriger Energie mit einem fein kollimierten Photonenstrahl (50 x 50 µm2) gescannt. Neben der guten Energieauflösung des Detektorsystems von durchschnittlich 2.2 keV bei 60 keV, zeigen die Ergebnisse das homogene Verhalten der Detektoreffizienz, welche essentiell für den spektographischen Einsatz in FOCAL ist. Es konnten keine Hinweise auf messbare Ladungsverluste im Bereich des aktiven Detektorvolumens festgestellt werden. Ebenso konnte die Multiplizität (Anzahl der Streifen einer Detektorseite, die auf ein Ereignis reagieren), mit der ein Photon nachgewiesen wird, eindeutig mit der Strukturierung der Kontakte auf der Kristalloberfläche in Verbindung gebracht werden. Es stellte sich heraus, dass die Ereignisse der Multiplizität zwei dazu verwendet werden können um Ortsauflösungen deutlich unterhalb einer Streifenbreite zu erreichen. Diese Methode kann jedoch nur auf eine größere Anzahl von Ereignissen angewendet werden, nicht jedoch auf einzelne Ereignisse. Um das 2D-Ge(i)-µ-Streifendetektorsystem auf seine Eignung als Compton-Polarimeter zu testen, wurden Daten mit einem nahezu vollständig linear polarisierten Photonenstrahl (98% linear polarisiert) bei einer Energie von 210 keV aufgenommen. Die Daten zeigen die erwartete Dipol-ähnliche Asymmetrie im Ortsbild und dienen als Kalibrationsgrundlage zur Interpretation zukünftiger Experimente zur Polarimetrie in diesem Energiebereich. Parallel hierzu wurde an Simulationsprogrammen auf Basis der etablierten Monte Carlo Software EGS4 gearbeitet. Hiermit wurden Vorhersagen bezüglich des Nachweisverhaltens des Detektors auf linear polarisierte Röntgenstahlung gemacht. Ferner wurde für ein 4x4-Pixel-Polarimeter, das bei der ersten Bestimmung der linearen Polarisation der K-REC Strahlung von U92+ am Speichering ESR der GSI eingesetzt wurde, im Rahmen der Datenanalyse mit den auf EGS4-basierenden Programmen die Detektoreffizienz für linear polarisierte Strahlung einer bestimmten Energie simuliert. Mit diesen Simulationsergebnissen konnten die selbstentwickelten Methoden zur Korrektur der Nachweiswahrscheinlichkeit eines Compton-Ereignisses als Funktion des Wechselwirkungspunkts innerhalb des Detektorkristalls und der Energie erfolgreich verifiziert werden. Die detektorbezogenen Resultate dieser Arbeit fanden ihre erste Anwendung in der FOCAL-Spektrometer Strahlzeit 2006, deren genaue Beschreibung jedoch über den Umfang dieser Arbeit hinausgeht. Ebenso flossen die Erfahrungen, die mit den Detektorsystemen, im speziellen dem 2D-Ge(i)-µ-Streifendetektor, gemacht wurden in die Realisierung eines Si(Li)-Detektors mit 32+32 Streifen zur Compton-Polarimetrie bei niedrigeren Energien (ab 60 keV) ein, der gegenwärtig in ersten Experimenten am ESR eingesetzt wird.
Charge states and energy loss of heavy ions after passing an inductively coupled plasma target
(2019)
In various kinds of fields such as accelerator physics, warm dense matter, high energy density physics, and inertial confinement fusion, heavy ions beam-plasma interaction plays an important role, and abundant investigations have been and are being carried out. Taking advantage of a good level of understanding on the interaction between a swift heavy ions beam and a hydrogen gas discharge plasma, an engineering application of a spherical theta-pinch device as a plasma stripper for FAIR (facility for antiproton and ion research) and a scientific application of a swift heavy ions beam as a novel plasma diagnostic tool are proposed and investigated.
The spherical theta-pinch device is manufactured, improved, and comprehensively tested for its application as a plasma stripper. The device is mainly composed of an evacuated glass vessel that can be filled with gas (for example: hydrogen) and a LRC circuit including a capacitors bank and a set of coils. Discharging the device at an initial hydrogen pressure in the glass vessel and an operation voltage for the capacitors bank, a circuit current oscillates in the LRC circuit. The oscillating circuit current in the set of coils induces a corresponding alternating magnetic field inside the glass vessel to ignite and maintain a hydrogen plasma.
Based on the built setup of circuit and plasma diagnostics, the measurements of circuit current, plasma light emission, plasma shape, and hydrogen Balmer series are carried out. The recorded signals of the circuit current and the plasma light emission of many consecutively repetitive discharges overlap perfectly, which indicate a very good reproducibility of the parameters of the LRC circuit during discharge and the generated plasma. From the measured circuit current, a real energy transfer efficiency is calculated by our proposed new model, which shows its overall tendency varying with the hydrogen pressure and the operation voltage, including the maximum value of 25% occurring at an initial hydrogen pressure of around 25 Pa and a maximum operation voltage of 14 kV. So, the discharge at an initial hydrogen pressure of 20 Pa and an operation voltage of 14 ...
In this thesis, the production of charged kaons and Φ mesons in Au+Au collisions at sqrt sAuAu = 2.4 GeV is studied. At this energy, all particles carrying open and hidden strangeness are produced below their respective free nucleon-nucleon threshold with the corresponding so-called excess energies: sqrt sK+ exc = -0.15 GeV, sqrt sK- exc = -0.46 GeV, sqrt sΦ exc = -0.49 GeVGeV. As a consequence, the production cross sections are very sensitive to medium effects like momentum distributions, two- or multistep collisions, and modification of the in-medium spectral distribution of the produced states [1]. K+ and K- mesons exhibit different properties in baryon dominated matter, since only K- can be resonantly absorbed by nucleons. Although strangeness exchange reactions have been proposed to be the dominant channel for K- production in the analyzed energy regime, the production yield and kinematic distributions could also be explained in smaller systems based on statistical hadronization model fits to the measured particle yields, including a canonical strangeness suppression radius RC, and taking the Φ feed-down to kaons into account [2, 3]. For the first time in central Au+Au collisions at such low energies, it is possible to reconstruct and do a multi differential analysis of K- and Φ mesons. In principle, this should be the ideal environment for strangeness exchange reactions to occur, as the particles are produced deeply sub-threshold in a large and long-living system. Therefore, it is the ultimate test to differentiate between the different sources for K- production in HIC.
In total 7.3x10exp9 of the 40% most central Au(1.23 GeV per nucleon)+Au collisions are analyzed. The data has been recorded with the High Acceptance DiElectron Spectrometer HADES located at Helmholtzzentrum für Schwerionenforschung GSI in April/May 2012. A substantially improved reconstruction method has been employed to reconstruct the hadrons with high purity in a wide phase space region.
The estimated particle multiplicities follow a clear hierarchy of the excess energy: 41.5 ± 2.1|sys protons at mid-rapidity per unit in rapidity, 11.1 ± 0.6|sys ± 0.4|extrapol π-, (3.01 ± 0.03|stat ± 0.15|sys ± 0.30|extrapól) x10 exp -2 K+, (1.94 ± 0.09|stat ± 0.10|sys ± 0.10|extrapol)x10 exp -4 K- and (0.99 ± 0.24|stat ± 0.10|sys ± 0.05|extrapol)x10 exp -4 Φ per event. The multiplicities of the strange hadrons increase more than linear with the mean number of participating nucleons hAparti, supporting the assumption that the necessary energy to overcome the elementary production threshold is accumulated in multi-particle interactions. Transport models predict such an increase, but are overestimating the measured particle yield and are not able to describe the kinematic distributions of K+ mesons perfectly. However, the best description is given by the IQMD model with a density dependent kaonnucleon potential of 40 MeV at nuclear ground state density.
The K-=K+ multiplicity ratio is constant as a function of centrality and follows with (6.45 ± 0.77)x10 exp -3 the trend of increasing with beam energy indicated from previous experiments [4]. The effective temperature of K- TK+eff = (84 ± 6) MeV is found to be systematically lower than the one of K+ TK+eff = (104 ± 1) MeV, which has also been observed by the other experiments.
The Φ=K- ratio is with a value of 0.52 ± 0.16 higher than the one obtained at higher center-of-mass energies and smaller systems. This behavior is predicted from a tuned version of the UrQMD transport model [5], when including higher mass baryonic resonances which can decay into Φ mesons and from statistical hadronization models when suppressing open strangeness canonically. The found ratio is constant as a function of centrality and results with a branching ratio of 48.9%, that ~ 25% of all measured K- originate from Φ feed-down decays. A two component PLUTO simulation, consisting of a pure thermal and a K- contribution originating from Φ decays, can fully explain the observed lower effective temperature in comparison to K+ and the shape of the measured rapidity distribution of K-. As a result, we find no indication for strangeness exchange reactions being the dominant mechanism for K- production in the SIS18 energy regime, if taking the contribution from Φ feed-down decays into account.
The hadron yields for the 20% most central collisions can be described by a statistical hadronization model fit with the chemical freeze-out temperature of Tchem = (68 ± 2) MeV and baryochemical potential of μB = (883 ± 25) MeV, which is higher than expected from previous parameterizations. The analysis of the transverse mass spectra of protons indicate a kinetic freeze-out temperature of Tkin = (70 ± 4) MeV and radial flow velocity of βr = 0.43 ± 0.01, which is in agreement with the parameters obtained from the linear dependence of the effective temperatures on the particle mass Tkin = (71.5 ± 4.2) MeV and βr = 0.28 ± 0.09.
Neutron stars are very dense objects. One teaspoon of their material would have a mass of five billion tons. Their gravitational force is so strong that if an object were to fall from just one meter high it would hit the surface of the respective neutron star at two thousand kilometers per second. In such dense bodies, different particles from the ones present in atomic nuclei, the nucleons, can exist. These particles can be hyperons, that contain non-zero strangeness, or broader resonances. There can also be different states of matter inside neutron stars, such as meson condensates and if the density is height enough to deconfine the nucleons, quark matter. As new degrees of freedom appear in the system, different aspects of matter have to be taken into account. The most important of them being the restoration of the chiral symmetry. This symmetry is spontaneously broken, which is a fact related to the presence of a condensate of scalar quark-antiquark pairs, that for this reason is called chiral condensate. This condensate is present at low densities and even in vacuum. It is important to remember at this point that the modern concept of vacuum is far away from emptiness. It is full of virtual particles that are constantly created and annihilated, being their existence allowed by the uncertainty principle. At very high temperature/density, when the composite particles are dissolved into constituents, the chiral consensate vanishes and the chiral symmetry is restored. To explain how and when chiral symmetry is restored in neutron stars we use a model called non-linear sigma model. This is an effective quantum relativistic model that was developed in order to describe systems of hadrons interacting via meson exchange. The model was constructed from symmetry relations, which allow it to be chiral invariant. The first consequence of this invariance is that there are no bare mass terms in the lagrangian density, causing all, or most of the particles masses to come from the interactions with the medium. There are still other interesting features in neutron stars that cannot be found anywhere else in nature. One of them is the high isospin asymmetry. In a normal nucleus, the amount of protons and neutrons is more or less the same. In a neutron star the amount of neutrons is much higher than the protons. The resulting extra energy (called Fermi energy) increases the energy of the system, allowing the star to support more mass against gravitational collapse. As a consequence of that in early stages of the neutron star evolution, when there are still many trapped neutrinos, the proton fraction is higher than in later stages and consequently the maximum mass that the star can support against gravity is smaller. This, between many other features, shows how the microscopic phenomena of the star can reflect into the macroscopic properties. Another important property of neutron stars is charge neutrality. It is a required assumption for stability in neutron stars, but there are others. One example is chemical equilibrium. It means that the number of particles from each kind is not conserved, but they are created and annihilated through specific reactions that happen at the same rate in both directions. Although to calculate microscopic physics of neutron stars the space-time of special relativity, the Minkowski space, can be used, this is not true for the global properties of the star. In this case general relativity has to be used. The solution of Einstein's equations simplified to static, spherical and isotropic stars correspond to the configurations in which the star is in hydrostatic equilibrium. That means that the internal pressure, coming mainly from the Fermi energy of the neutrons, balances the gravity avoiding the collapse. When rotation is included the star becomes more stable, and consequently, can be more massive. The movement also makes it non-spherical, what requires the metric of the star to also be a function of the polar coordinate. Another important feature that has to be taken into account is the dragging of the local inertial frame. It generates centrifugal forces that are not originated in interactions with other bodies, but from the non-rotation of the frame of reference within which observations are made. These modifications are introduced through the Hartle's approximation that solves the problem by applying perturbation theory. In the mean field approximation, the couplings as well as the parameters of the non-linear sigma model are calibrated to reproduce massive neutron stars. The introduction of new degrees of freedom decreases the maximum mass allowed for the neutron star, as they soften the equation of state. In practice, the only baryons present in the star besides the nucleons are the Lambda and Sigma-, in the case in which the baryon octet is included, and Lambda and Delta-,0,+,++, in the case in which the baryon decuplet is included. The leptons are included to ensure charge neutrality. We choose to proceed our calculations including the baryon octet but not the decuplet, in order to avoid uncertainties in the couplings. The couplings of the hyperons were fitted to the depth of their potentials in nuclei. In this case the chiral symmetry restoration can be observed through the behavior of the related order parameter. The symmetry begins to be restored inside neutron stars and the transition is a smooth crossover. Different stages of the neutron star cooling are reproduced taking into account trapped neutrinos, finite temperature and entropy. Finite-temperature calculations include the heat bath of hadronic quasiparticles within the grand canonical potential of the system. Different schemes are considered, with constant temperature, metric dependent temperature and constant entropy. The neutrino chemical potential is introduced by fixing the lepton number in the system, that also controls the amount of electrons and protons (for charge neutrality). The balance between these two features is delicate and influenced mainly by the baryon number conservation. Isolated stars have a fixed number of baryons, which creates a link between different stages of the cooling. The maximum masses allowed in each stage of the cooling process, the one with high entropy and trapped neutrinos, the deleptonized one with high entropy, and the cold one in beta equilibrium. The cooling process is also influenced by constraints related to the rotation of the star. When rotation is included the star becomes more stable, and consequently, can be more massive. The movement also deforms it, requiring the metric of the star to include modifications that are introduced through the use of perturbation theory. The analysis of the first stages of the neutron star, when it is called proto-neutron star, gives certain constraints on the possible rotation frequencies in the colder stages. Instability windows are calculated in which the star can be stable during certain stages but collapses into black holes during the cooling process. In the last part of the work the hadronic SU(3) model is extended to include quark degrees of freedom. A new effective potential to the order parameter for deconfinement, the Polyakov loop, makes the connection between the physics at low chemical potential and hight temperature of the QCD phase diagram with the height chemical potential and low temperature part. This is done through the introduction of a chemical potential dependency on the already temperature dependent potential. Analyzing the effect of both order parameters, the chiral condensate and the Polyakov loop, we can drawn a phase diagram for symmetric as well as for star matter. The diagram contains a crossover region as well as a first order phase transition line. The new couplings and parameters of the model are chosen mainly to fit lattice QCD, including the position of the critical point. Finally, this matter containing different degrees of freedom (depending on which phase of the diagram we are) is used to calculate hybrid star properties.
In this thesis, a novel 257 kHz chopper device was numerically developed, technically designed and experimentally commissioned; a 4-solenoid, low-energy ion beam transport line was numerically investigated, installed and experimentally commissioned; and a novel massless beam-separation system was numerically developed.
The chopper combines a pulsed electric field with a static magnetic field in an ExB or Wien-filter type field configuration. Chopped beam pulses with a 257 kHz repetition rate and rise times of 110 ns were experimentally achieved using a 14 keV helium beam.
Due to the achieved results, the complete LEBT line for the future Frankfurt Neutron Source FRANZ is ready to deliver a dc or a pulsed beam. At the same time, the LEBT section represents an attractive test stand for the study of low-energy ion beams. It combines magnetic lenses, which allow space-charge compensated beam transport, and a chopper system capable of producing short beam pulses in the hundred nanosecond range. Since these beam pulses are transported onwards, their longitudinal and transverse properties can be analyzed. The pulse duration and time of flight are well below the rise time for the space-charge compensation through residual gas ionization. This opens the possibility for dedicated investigations of the transport of short, low-energy beam pulses including longitudinal and transverse space-charge effects and of relevant issues like the dynamics of space-charge compensation and electron effects in short pulses.
The realization of a fast and robust closed orbit feedback (COFB) system for the on-ramp orbit correction at SIS18 synchrotron of FAIR project is reported in this thesis. SIS18 has some peculiar behaviors including on-ramp optics variation, very short lengths of the ramps (200 ms to 1 s) and a cycle-to-cycle variation of beam parameters. The realized fast COFB system being robust against above mentioned features of SIS18 is a first of its kind and the course to its realization led to some novel contributions in the field of closed orbit correction. A new method relying on the discrete Fourier transform (DFT)-based decomposition of the orbit response matrix (ORM) has been introduced, exploiting the symmetry in the arrangement of beam position monitors (BPMs) and the corrector magnets in the synchrotrons. A nearest-circulant approximation has also been introduced for synchrotrons having slight deviation from the symmetry, making the method applicable to a vast majority of synchrotrons. Moreover, the performance and the stability analysis of COFB systems in the presence of ORM mismatch between the synchrotron and the feedback controller is presented. The COFB systems are divided into slow and fast regimes and a new stability criterion consistent with measurements, is introduced. The practicality of the criterion is verified experimentally at COSY Jülich and is used for the analysis of various sources of ORM mismatch at SIS18. The commissioning of the SIS18 COFB system is also reported in detail which relies on Libera Hadron as the main hardware resource for the controller implementation. The on-ramp orbit correction is demonstrated for the horizontal plane of SIS18, for the disturbance rejection up to 600 Hz.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.
The strong force is one of the four fundamental interactions, and the theory of it is called Quantum Chromodynamics (QCD). A many-body system of strongly interacting particles (QCD matter) can exist in different phases depending on temperature (T) and baryonic chemical potential (µB). The phases and transitions between them can be visualized as µB−T phase diagram. Extraction of the properties of the QCD matter, such as compressibility, viscosity and various susceptibilities, and its Equation of State (EoS) is an important aspect of the QCD matter study. In the region of near-zero baryonic chemical potential and low temperatures the QCD matter degrees of freedom are hadrons, in which quarks and gluons are confined, while at higher temperatures partonic (quarks and gluons) degrees of freedom dominate. This partonic (deconfined) state is called quark-gluon plasma (QGP) and is intensively studied at CERN and BNL. According to lattice QCD calculations at µB=0 the transition to QGP is smooth (cross-over) and takes place at T≈156 MeV. The region of the QCD phase diagram, where matter is compressed to densities of a few times normal nuclear density (µB of several hundreds MeV), is not accessible for the current lattice QCD calculations, and is a subject of intensive research. Some phenomenological models predict a first order phase transition between hadronic and partonic phases in the region of T≲100 MeV and µB≳500 MeV. Search for signs of a possible phase transition and a critical point or clarifying whether the smooth cross-over is continuing in this region are the main goals of the near future explorations of the QCD phase diagram.
In the laboratory a scan of the QCD phase diagram can be performed via heavy-ion collisions. The region of the QCD phase diagram at T≳150 MeV and µB≈0 is accessible in collisions at LHC energies (√sNN of several TeV), while the region of T≲100 MeV and µB≳500 MeV can be studied with collisions at √sNN of a few GeV. The QCD matter created in the overlap region of colliding nuclei (fireball) is rapidly expanding during the collision evolution. In the fireball there are strong temperature and pressure gradients, extreme electromagnetic fields and an exchange of angular momentum and spin between the system constituents. These effects result in various collective phenomena. Pressure gradients and the scattering of particles, together with the initial spatial anisotropy of the density distribution in the fireball, form an anisotropic flow - a momentum (azimuthal) anisotropy in the emission of produced particles. The correlation of particle spin with the angular momentum of colliding nuclei leads to a global polarization of particles. A strong initial magnetic field in the fireball results in a charge dependence and particle-antiparticle difference of flow and polarization.
Anisotropic flow is quantified by the coefficients vₙ from a Fourier decomposition of the azimuthal angle distribution of emitted particles relative to the reaction plane spanned by beam axis and impact parameter direction. The first harmonic coefficient v₁ quantifies the directed flow - preferential particle emission either along or opposite to the impact parameter direction. The v₁ is driven by pressure gradients in the fireball and thus probes the compressibility of the QCD matter. The change of the sign of v₁ at √sNN of several GeV is attributed to a softening of the EoS during the expansion, and thus can be an evidence of the first order phase transition. The global polarization coefficient PH is an average value of the hyperon’s spin projection on the direction of the angular momentum of the colliding system. It probes the dynamics of the QCD matter, such as vorticity, and can shed light on the mechanism of orbital momentum transfer into the spin of produced particles.
In collisions at √sNN of several GeV, which probe the region of the QCD phase diagram at T≲100 MeV and µB≳500 MeV, hadron production is dominated by u and d quarks. Hadrons with strange quarks are produced near the threshold, what makes their yields and dynamics sensitive to the density of the fireball. Thus measurement of flow and polarization, in particular of (multi-)strange particles, provides experimental constraints on the EoS, that allows to extract transport coefficients of the QCD matter from comparison of data with theoretical model calculations of heavy-ion collisions.
For continuation of the annotation see the PDF of thesis