Refine
Year of publication
- 2017 (236) (remove)
Document Type
- Article (140)
- Preprint (52)
- Doctoral Thesis (23)
- Conference Proceeding (8)
- Master's Thesis (7)
- Contribution to a Periodical (3)
- Bachelor Thesis (2)
- Other (1)
Has Fulltext
- yes (236)
Is part of the Bibliography
- no (236) (remove)
Keywords
- QCD phase diagram (3)
- Biophysics and structural biology (2)
- Cryo-electron microscopy (2)
- D-wave (2)
- Gabor lens (2)
- Gabor-Linse (2)
- I-wave (2)
- LHC (2)
- QCD (2)
- Research article (2)
Institute
- Physik (236) (remove)
The detailed biophysical mechanisms through which transcranial magnetic stimulation (TMS) activates cortical circuits are still not fully understood. Here we present a multi-scale computational model to describe and explain the activation of different pyramidal cell types in motor cortex due to TMS. Our model determines precise electric fields based on an individual head model derived from magnetic resonance imaging and calculates how these electric fields activate morphologically detailed models of different neuron types. We predict neural activation patterns for different coil orientations consistent with experimental findings. Beyond this, our model allows us to calculate activation thresholds for individual neurons and precise initiation sites of individual action potentials on the neurons’ complex morphologies. Specifically, our model predicts that cortical layer 3 pyramidal neurons are generally easier to stimulate than layer 5 pyramidal neurons, thereby explaining the lower stimulation thresholds observed for I-waves compared to D-waves. It also shows differences in the regions of activated cortical layer 5 and layer 3 pyramidal cells depending on coil orientation. Finally, it predicts that under standard stimulation conditions, action potentials are mostly generated at the axon initial segment of cortical pyramidal cells, with a much less important activation site being the part of a layer 5 pyramidal cell axon where it crosses the boundary between grey matter and white matter. In conclusion, our computational model offers a detailed account of the mechanisms through which TMS activates different cortical pyramidal cell types, paving the way for more targeted application of TMS based on individual brain morphology in clinical and basic research settings.
Motivated by the necessary replacement of the GSI UNILAC poststripper linac, a compact and efficient linac design based on IH-type cavities has been developed. Using KONUS beam dynamics, it was possible to design a linac consisting of only five cavities that can be operated by the existing UNILAC RF amplifier structure. The transversal focusing scheme is based on magnetic quadrupole triplet lenses. The optimized design provides full transmission and low emittance growth for the design current of 15 emA U28+, accelerating the beam from 1.4 MeV/u to 11.4 MeV/u. Extensive error studies were performed to define tolerances and verify the stability of the design with respect to misalignment and injection parameters. The design provides a compact and cost effective alternative to a new Alvarez linac. With a total length of just 22.8 meters it will leave room for future energy upgrades in the UNILAC tunnel.
Relativistic jets from active galactic nuclei (AGN) often display a non-uniform structure and are, under certain conditions, susceptible to a number of instabilities. An interesting example is the development of non-axisymmetric, Rayleigh-Taylor type instabilities in the case of differentially rotating two-component jets, with the toroidal component of the magnetic field playing a key role in the development or suppression of these instabilities. We have shown that higher magnetization leads to stability against these non-axisymmetric instabilities. Using ray-casting on data from relativistic MHD simulations of two-component jets, we now investigate the effect of these instabilities on the synchrotron emission pattern from the jets. We recover many well known trends from actual observations, e.g., regarding the polarization fraction and the distribution of the position angle of the electric field, in addition to a different emitting region, depending on the stability of the jet.
Autophagy is a physiological process for the recycling and degradation of cellular materials. Forming the autophagosome from the phagophore, a cup-shaped double-membrane vesicle, is a critical step in autophagy. The origin of the cup shape of the phagophore is poorly understood. In yeast, fusion of a small number of Atg9-containing vesicles is considered a key step in autophagosome biogenesis, aided by Atg1 complexes (ULK1 in mammals) localized at the preautophagosomal structure (PAS). In particular, the S-shaped Atg17-Atg31-Atg29 subcomplex of Atg1 is critical for phagophore nucleation at the PAS. To study this process, we simulated membrane remodeling processes in the presence and absence of membrane associated Atg17. We show that at least three vesicles need to fuse to induce the phagophore shape, consistent with experimental observations. However, fusion alone is not sufficient. Interactions with 34-nm long, S-shaped Atg17 complexes are required to overcome a substantial kinetic barrier in the transition to the cup-shaped phagophore. Our finding rationalizes the recruitment of Atg17 complexes to the yeast PAS, and their unusual shape. In control simulations without Atg17, with weakly binding Atg17, or with straight instead of S-shaped Atg17, the membrane shape transition did not occur. We confirm the critical role of Atg17-membrane interactions experimentally by showing that mutations of putative membrane interaction sites result in reduction or loss of autophagic activity in yeast. Fusion of a small number of vesicles followed by Atg17-guided membrane shape-remodeling thus emerges as a viable route to phagophore formation.
The phenomenon of jet quenching provides essential information about the properties of hot and dense matter created in ultra-relativistic heavy-ion collisions. Recent results from experiments at the Large Hadron Collider (LHC) show evidence for an unexpectedly similar suppression of both light and heavy flavor jets. Furthermore, the role of radiative energy loss of heavy quarks is still under active discussion within the theoretical community. By employing the parton cascade Boltzmann Approach to Multi-Parton Scatterings (BAMPS), which numerically solves the 3+1 D Boltzmann equation both for light and heavy flavor partons, we calculate the nuclear modification factor of inclusive and b-tagged reconstructed jets in 0–10% central sLHC=2.76ATeV Pb + Pb collisions. Based on perturbative QCD cross sections we find a suppression of both light and heavy flavor jets. While the inclusive jets are slightly too strong suppressed within Bamps in comparison with data, both elastic + radiative and only elastic interactions lead to a realistic b-tagged jet suppression. To further investigate light and heavy flavor energy loss we predict the R dependence of inclusive and b-tagged jet suppression. Furthermore, we propose the medium modification of b-tagged jet shapes as an observable for discriminating between different heavy quark energy loss scenarios.
In its weak field limit, Scalar-tensor-vector gravity theory introduces a Yukawa-correction to the gravitational potential. Such a correction depends on the two parameters, α which accounts for the modification of the gravitational constant, and μ∗−1 wwhich represents the scale length on which the scalar field propagates. These parameters were found to be universal when the modified gravitational potential was used to fit the galaxy rotation curves and the mass profiles of galaxy clusters, both without Dark Matter. We test the universality of these parameters using the temperature anisotropies due to the thermal Sunyaev–Zeldovich effect. In our model the intra-cluster gas is in hydrostatic equilibrium within the modified gravitational potential well and it is described by a polytropic equation of state. We predict the thermal Sunyaev–Zeldovich temperature anisotropies produced by Coma cluster, and we compare them with those obtained using the Planck 2013 Nominal maps. In our analysis, we find α and the scale length, respectively, to be consistent and to depart from their universal values. Our analysis points out that the assumption of the universality of the Yukawa-correction to the gravitational potential is ruled out at more than 3.5σ at galaxy clusters scale, while demonstrating that such a theory of gravity is capable to fit the cluster profile if the scale dependence of the gravitational potential is restored.
The goal of heavy ion reactions at low beam energies is to explore the QCD phase diagram at high net baryon chemical potential. To relate experimental observations with a first order phase transition or a critical endpoint, dynamical approaches for the theoretical description have to be developed. In this summary of the corresponding plenary talk, the status of the dynamical modeling including the most recent advances is presented. The remaining challenges are highlighted and promising experimental measurements are pointed out.
We present a method that enables the identification and analysis of conformational Markovian transition states from atomistic or coarse-grained molecular dynamics (MD) trajectories. Our algorithm is presented by using both analytical models and examples from MD simulations of the benchmark system helix-forming peptide Ala5, and of larger, biomedically important systems: the 15-lipoxygenase-2 enzyme (15-LOX-2), the epidermal growth factor receptor (EGFR) protein, and the Mga2 fungal transcription factor. The analysis of 15-LOX-2 uses data generated exclusively from biased umbrella sampling simulations carried out at the hybrid ab initio density functional theory (DFT) quantum mechanics/molecular mechanics (QM/MM) level of theory. In all cases, our method automatically identifies the corresponding transition states and metastable conformations in a variationally optimal way, with the input of a set of relevant coordinates, by accurately reproducing the intrinsic slowest relaxation rate of each system. Our approach offers a general yet easy-to-implement analysis method that provides unique insight into the molecular mechanism and the rare but crucial (i.e., rate-limiting) transition states occurring along conformational transition paths in complex dynamical systems such as molecular trajectories.
Walter Greiner: in memoriam
(2017)
Walter Greiner (29 October 1935 - 6 October 2016) was a German theoretical physicist. His scientific research interests include the thematic areas of atomic physics, heavy ion physics, nuclear physics, elementary particle physics (particularly quantum electrodynamics and quantum chromodynamics). He is most known in Germany for his series of books in theoretical physics, but he is also well known around the world. Greiner was born on October 29, 1935, in Neuenbau, Sonnenberg, Germany. He studied physics at the University of Frankfurt (Goethe University in Frankfurt Am Main), receiving in this institution a BSci in physics and a Master’s degree in 1960 with a thesis on plasma-reactors, and a PhD in 1961 at the University of Freiburg under Hans Marshal, with a thesis on the nuclear polarization in μμ-mesic atoms. During the period of 1962 to 1964 he was assistant professor at the University of Maryland, followed by a position as research associate at the University of Freiburg, in 1964. Starting in 1965, he became a full professor at the Institute for Theoretical Physics at Goethe University until 2003. Greiner has been a visiting professor to many universities and laboratories, including Florida State University, the University of Virginia, the University of California, the University of Melbourne, Vanderbilt University, Yale University, Oak Ridge National Laboratory and Los Alamos National Laboratory. In 2003, with Wolf Singer, he was the founding Director of the Frankfurt Institute for Advanced Studies (FIAS), and gave lectures and seminars in elementary particle physics. He died on October 6, 2016 at the age of 80.
Walter Greiner was an excellent teacher, researcher, friend. And he was a great supporter of the series of events known by the acronyms IWARA - International Workshop on Astronomy and Relativistic Astrophysics, STARS - Caribbean Symposium on Cosmology, Gravitation, Nuclear and Astroparticle Physics, and SMFNS - International Symposium on Strong Electromagnetic Fields and Neutron Stars. Walter Greiner left us. But his memory will remain always alive among us who have had the privilege of knowing him and enjoy his wisdom and joy of living.
The KER for electron capture of vibrational cooled HeH+ and H3 + ions at 20 keV from residual gas atoms has been measured in the Frankfurt Low Energy Storage Ring (FLSR). At a vacuum in the order of few 10-11 mbar, this residual gas consists to 99% of H2 molecules. For the identification of the recoil products of this reaction, a recoil spectrometer (with an MCP-detector with position and time sensitive read out) was installed at one of the focus points (IP) in the FLSR. The planned extension of this set up by a gas target to a full COLTRIMS reaction microscope will be discussed.
According to a proposal by 't Hooft, information loss introduced by constraints in certain classical dissipative systems may lead to quantization. This scheme can be realized within the Bateman model of two coupled oscillators, one damped and one accelerated. In this paper we analyze the links of this approach to effective Hamiltonians where the environmental degrees of freedom do not appear explicitly but their effect leads to the same friction force appearing in the Bateman model. In particular, it is shown that by imposing constraints, the Bateman Hamiltonian can be transformed into an effective one expressed in expanding coordinates. This one can be transformed via a canonical transformation into Caldirola and Kanai's effective Hamiltonian that can be linked to the conventional system-plus-reservoir approach, for example, in a form used by Caldeira and Leggett.
In this work we present, for the first time, the non-perturbative renormalization for the unpolarized, helicity and transversity quasi-PDFs, in an RI′ scheme. The proposed prescription addresses simultaneously all aspects of renormalization: logarithmic divergences, finite renormalization as well as the linear divergence which is present in the matrix elements of fermion operators with Wilson lines. Furthermore, for the case of the unpolarized quasi-PDF, we describe how to eliminate the unwanted mixing with the twist-3 scalar operator.
We utilize perturbation theory for the one-loop conversion factor that brings the renormalization functions to the MS-scheme at a scale of 2 GeV. We also explain how to improve the estimates on the renormalization functions by eliminating lattice artifacts. The latter can be computed in one-loop perturbation theory and to all orders in the lattice spacing.
We apply the methodology for the renormalization to an ensemble of twisted mass fermions with Nf = 2 + 1 + 1 dynamical quarks, and a pion mass of around 375 MeV.
Motivated by recent experimental suggestions of charge-order-driven ferroelectricity in organic charge-transfer salts, such as κ-(BEDT-TTF)2Cu[N(CN)2]Cl, we investigate magnetic and charge-ordered phases that emerge in an extended two-orbital Hubbard model on the anisotropic triangular lattice at 3/4 filling. This model takes into account the presence of two organic BEDT-TTF molecules, which form a dimer on each site of the lattice, and includes short-range intramolecular and intermolecular interactions and hoppings. By using variational wave functions and quantum Monte Carlo techniques, we find two polar states with charge disproportionation inside the dimer, hinting to ferroelectricity. These charge-ordered insulating phases are stabilized in the strongly correlated limit and their actual charge pattern is determined by the relative strength of intradimer to interdimer couplings. Our results suggest that ferroelectricity is not driven by magnetism, since these polar phases can be stabilized also without antiferromagnetic order and provide a possible microscopic explanation of the experimental observations. In addition, a conventional dimer-Mott state (with uniform density and antiferromagnetic order) and a nonpolar charge-ordered state (with charge-rich and charge-poor dimers forming a checkerboard pattern) can be stabilized in the strong-coupling regime. Finally, when electron–electron interactions are weak, metallic states appear, with either uniform charge distribution or a peculiar 12-site periodicity that generates honeycomb-like charge order.
Transition path sampling is a powerful tool in the study of rare events. Shooting trial trajectories from configurations along existing transition paths proved particularly efficient in the sampling of reactive trajectories. However, most shooting attempts tend not to result in transition paths, in particular in cases where the transition dynamics has diffusive character. To overcome the resulting efficiency problem, we developed an algorithm for “shooting from the top.” We first define a shooting range through which all paths have to pass and then shoot off trial trajectories only from within this range. For a well chosen shooting range, nearly every shot is successful, resulting in an accepted transition path. To deal with multiple mechanisms, weighted shooting ranges can be used. To cope with the problem of unsuitably placed shooting ranges, we developed an algorithm that iteratively improves the location of the shooting range. The transition path sampling procedure is illustrated for models of diffusive and Langevin dynamics. The method should be particularly useful in cases where the transition paths are long so that only relatively few shots are possible, yet reasonable order parameters are known.
We have developed and characterized the novel PTR3, a proton transfer reaction-time-of-flight mass spectrometer (PTR-TOF) using a new gas inlet and an innovative reaction chamber design. The reaction chamber consists of a tripole operated with rf voltages generating an electric field only in the radial direction. An elevated electrical field is necessary to reduce clustering of primary hydronium (H3O+) and product ions with water molecules present in the sample gas. The axial movement of the ions is achieved by the sample gas flow only. Therefore, the new design allows a 30-fold longer reaction time and a 40-fold increase in pressure compared to standard PTR-TOF-MS. First calibration tests show sensitivities of up to 18000 counts per second/parts per billion and volume (cps/ppbv) at a mass resolution of >8000 m/Δm (fwhm). The new inlet using center-sampling through a critical orifice reduces wall losses of low volatility compounds. Therefore, the new PTR3 instrument is sensitive to VOC typically present in the ppbv range as well as to semivolatile organic compounds (SVOC) and even highly oxidized organic molecules (HOMs) present in the parts per quadrillion per volume (ppqv) range in the atmosphere.
We present a calculation of the global polarization of Λ hyperons in relativistic Au–Au collisions at RHIC Beam Energy Scan range sNN−−−√=7.7−200 GeV with a 3+1-dimensional cascade+viscous hydro model, UrQMD+vHLLE. Within this model, the mean polarization of Λ in the out-of-plane direction is predicted to decrease rapidly with collision energy from a top value of about 2% at the lowest energy examined. We explore the connection between the polarization signal and thermal vorticity and estimate the feed-down contribution to Λ polarization due to the decay of higher mass hyperons.
The topic of this thesis is the investigation of scalar tetraquark candidates from lattice QCD. It is motivated by a previous study originating in the twisted mass collaboration. The initial tetraquark candidate of choice is the $a_0(980)$, an isovector in the nonet of light scalars ($J^P=0^+$). This channel is still poorly understood. It displays an inverted mass hierarchy to what is expected from the conventional quark model and the $a_0(980)$ and $f_0(980)$ feature a surprising mass degeneracy. For this reasons the $a_0(980)$ is a long assumed tetraquark candidate in the literature.
We follow a methodological approach by studying the sensitivity of the scalar spectrum with fully dynamical quarks to a large basis of two-quark and four-quark creation operators. Ultimately, the candidate has to be identified in the direct vicinity of two two-particles states, which is understandably inevitable for a tetraquark candidate. To succeed in this difficult task two-meson creation operators are essential to employ in this channel. By localized four-quark operators we intend to probe the Hamiltonian on eigenstates with a closely bound four-quark structure.
Development of the timing system for the Bunch-to-Bucket transfer between the FAIR accelerators
(2017)
The FAIR project is aiming at providing high-energy beams of ions of all elements from hydrogen to uranium, antiprotons and rare isotopes with high intensities. The existing accelerator facility of GSI and the future FAIR facility employ a variety of circular accelerators like heavy ion synchrotrons (SIS18 and SIS100) and storage rings (ESR, CRYRING, CR and HESR) for the preparation of secondary beams and experiments. Bunches are required to be transferred into rf buckets among GSI and FAIR ring accelerators for different purposes. Without the proper transfer, the beam will be subject to various beam quality deterioration and even to beam losses. Hence, the proper bunch-to-bucket (B2B) transfer between two rings is of great importance for FAIR and is the topic, which has been investigated in this thesis.
These circular accelerators of GSI and FAIR have different ratios in their circumference. For example, the circumference ratio between SIS100 and SIS18 is an integer and between SIS18 and ESR is close to an integer and between CR and HESR is far away from an integer. The ring accelerators are connected via a complicated system of beam transfer lines, targets for the secondary particle production and the high energy separators mentioned above. For FAIR, not only the primary beams are required to be transferred from one ring to another, but also the secondary beams, e.g. the antiproton or rare isotope beams produced by the antiproton (pbar) target, the fragment separator (FRS) or the superconducting fragment separator (Super-FRS). An important topic for this system of accelerators is the proper transfer of beam between the different circular accelerators. Bunches of one ring must be transferred into buckets of another ring within an upper bound time constraint (e.g. 10 ms for most FAIR use cases) and with an acceptable B2B injection center mismatch +-1 degree for most FAIR use cases). Hence, a flexible FAIR B2B transfer system is required to realize the different complex B2B transfers between the FAIR rings in the future. In the focus of the system development and of this thesis is the transfer from SIS18 to SIS100, which can be tested at GSI on the transfer from SIS18 to ESR and from ESR to CRYRING. The system is based on the existing technical basis at GSI, the low-level radio frequency (LLRF) system and the FAIR control system. It coordinates with the Machine Protection System (MPS), which protects SIS100 and subsequent accelerators and experiments from damage caused by high intensity primary beams in case of malfunctioning. Besides, it indicates the beam status and the actual beam injection time for the beam instrumentation and diagnostics.
The conceptual realization of the FAIR B2B transfer system was introduced in this thesis for the first time. It achieves the most FAIR B2B transfers with a tolerable B2B injection center mismatch (e.g. +-1 degree) and within an upper bound time (e.g. 10 ms). It supports two synchronization methods, the phase shift and frequency beating methods. It is flexible to support the beam transfer between two rings with different ratios in their circumference and several B2B transfers running at the same time, e.g. the B2B transfer from SIS18 to SIS100 and at the same time the B2B transfer from ESR to CRYRING. It is capable to transfer beam of different ion species from one machine cycle to another and to transfer beams between two rings via the FRS, the pbar target and the Super-FRS. It allows various complex bucket filling pattern. In addition, it coordinates with the MPS system, which protects the SIS100 and subsequent accelerators or experiments from beam induced damage.
A list of criteria for the preservation of beam qualities during the rf frequency modulation of the phase shift method was analyzed. As an example the beam reaction on three different rf frequency modulation examples were analyzed for SIS18 beams. According to the beam dynamic analysis, there is a maximum value for the rf frequency modulation. The first derivative of the rf frequency modulation must be continuous and small enough and the second derivative must be small enough.
In addition to the analysis from the viewpoint of beam dynamics, two test setups were built. The first test setup was used to characterize the FAIR timing network – white rabbit network for the B2B transfer. In the second test setup, the firmware of the FAIR B2B transfer system was evaluated, which was running on the soft CPU, LatticeMico32, of the Scalable Control Unit - the FAIR standard Front End Controller. Besides, the boundary conditions of the different trigger scenarios of the SIS18 extraction and SIS100 injection kicker magnets were investigated. Finally, the application of the FAIR B2B transfer system for all FAIR use cases was demonstrated.
The dissertation plays a significant important role for the realization of the FAIR B2B transfer system and the further practical application of the system to all FAIR use cases.
Diese Doktorarbeit widmet sich der Untersuchung von Systemen von Quarks und der Wechselwirkung zwischen ihnen mit Hilfe von Lattice QCD. Aus Quarks zusammengesetzte Objekte heißen Hadronen. Ein bestimmter Typ von Hadronen ist das sogenannten Tetraquark. In Teilchendetektoren wie dem LHCb in der Schweiz oder Belle in Japan wurden in jüngerer Zeit Zustände gefunden, die als Kandidaten für Tetraquarks gelten. Diese Arbeit befasst sich mit der Beschreibung und Untersuchung solcher Tetraquark-Zustände. Die Systeme, um die es in dieser Arbeit hauptsächlich geht, enthalten vier Quarks unterschiedlicher Masse. Zwei Quarks wird im Großteil der Arbeit eine unendlich große Masse zugeordnet. Zwei Quarks haben eine endliche Masse. In dieser statisch-leichten Näherung ist es möglich, das Potential der schweren Quarks in Anwesenheit der leichten Quarks zu bestimmen und zu überprüfen, ob es attraktiv genug dazu ist, einen gebundenen Zustand der vier Quarks zu bilden. Dieses Vorgehen ist als Born-Oppenheimer-Approximation bekannt. Die Observable, die berechnet werden muss, ist also das Vier-Quark-Potential.
Im ersten Teil der Arbeit werden verschiedene Vier-Quark-Potentiale aufgeführt und die zugehörigen Quantenzahlen genannt. Jeder der geeigneten Kanäle wird auf seine Fähigkeit untersucht, einen gebundenen Zustand zu bilden. Eine ausführliche systematische und statistische Analyse liefert den eindeutigen Befund, dass Bindung nur für Isospin I = 0 und nichtstatistsche u- und d-Quarks möglich ist. Im Falle von I = 1 oder nichtstatistschen s- und c-Quarks ist kein gebundener Zustand zu erwarten. Schließlich wird für den Fall der u- und d-Quarks eine Extrapolation zu physikalischen Quarkmassen durchgeführt. Die Bindung wird mit abnehmender Quarkmasse stärker. Am physikalischen Punkt wird eine Bindungsenergie von −90(+43−36) MeV festgestellt. Somit wird für Quantenzahlen I(J^P) = 0(1^+) ein gebundener b̄b̄ud-Zustand postuliert. Im zweiten Teil der Arbeit wird die statisch-leichte Näherung aufgehoben. So kann der Spin der schweren Quarks einbezogen werden. Dies führt unter anderem dazu, dass B- und B* -Mesonen unterscheidbar werden. Ein Nachteil dessen, dass vier Quarks endlicher Masse verwendet werden, ist der, dass es nun nicht mehr möglich ist, das Potential der schweren Quarks in Gegenwart der leichten zu bestimmen. Stattdessen wird aus der Korrelationsfunktion des Vier-Quark-Zustands direkt die Masse bestimmt. Zur Beschreibung der schweren Quarks wird der Ansatz der Nichtrelativistischen QCD (NRQCD) gewählt. Es wird der aus dem ersten Teil bekannte gebundene b̄b̄ud-Zustand mit Quantenzahlen I(J^P) = 0(1^+) weiter untersucht. Wir nehmen an, dass die Quantenzahlen durch ein BB*-Molekül realisiert werden. Wir bestimmen mithilfe des generalisierten Eigenwertproblems (GEP) den Grundzustand. Die Masse des Grundzustands ist ein Hinweis auf die Existenz eines gebundenen Zustands. Insgesamt bekräftigt der Befund das im ersten Teil der Arbeit gefundene Resultat, die Vorhersage eines bisher nicht gemessenen Tetraquark-Zustandes, qualitativ. Im dritten Teil der Arbeit geht es um Vier-Quark-Systeme, die ein schweres Quark und ein schweres Antiquark sowie ein leichteres Quark und ein leichteres Antiquark enthalten. Neben einem gebundenen Vier-Quark-Zustand ist u.a. die Bildung eines Bottomonium-und-Pion-Zustands möglich. Dies macht die theoretische Beschreibung dieses Systems ungleich schwieriger als die Beschreibung des im ersten und zweiten Teil der Arbeit untersuchten Systems. Seine experimentelle Untersuchung hingegen ist weniger aufwändig. So wurden bereits Kandidaten für einen solchen Zustand gemessen: Z_b(10610) und Z_b(10650). Zunächst wird ein Szenario beschrieben, in welcher Reihenfolge die zu den verschiedenen Strukturen gehörenden Potentiale vorliegen. So handelt es sich bei dem Grundzustandspotential des Systems um das Potential eines unangeregten Bottomonium-Zustands mit einem Pion in Ruhe. Darüber liegen zahlreiche Bottomonium-Zustände mit Pionen mit endlichem Impuls. Inmitten dieser Potentiale liegt gegebenenfalls das gesuchte Tetraquark-Potential. Ziel ist, einen Weg zu finden, die Bottomonium-und-Pion-Potentiale und das Tetraquark-Potential voneinander zu unterscheiden. Im ersten Schritt wird der Bottomonium-und-Pion-Grundzustand mithilfe des GEP aus dem System entfernt. Der erste angeregte Zustand ist im Anschluss daran weitgehend frei von Einflüssen des Grundzustands. Man findet, dass das Potential des ersten angeregten Zustandes attraktiv ist, sodass die Bildung eines Tetraquark-Zustandes nicht ausgeschlossen ist. Um den ersten angeregten Zustand weiter zu untersuchen, wird ein quantenmechanisches Modell verwendet, das die Volumenabhängigkeit des Überlapp eines Testzustands mit den verschiedenen Strukturen beschreibt. Es damit prinzipiell möglich, unter Zuhilfenahme mehrerer Gittervolumina eine Aussage über die Struktur des ersten angeregten Zustands zu treffen.
Im Rahmen dieser Arbeit wurden neue Ansätze zur Optimierung eines Alvarez Beschleunigers für Schwerionen untersucht. Dabei dient die Alvarez-Sektion des GSI UNILAC als Untersuchungsfeld, da für den Injektionsbetrieb für FAIR eine Erneuerung dieser Sektion erforderlich ist. Dies wird durch einen neuen und optimierten Alvarez-Beschleuniger gewährleistet, wobei Effizienz und Feldstabilität sowie hohe Verfügbarkeit eine wichtige Rolle spielen. Dazu wurden im Rahmen dieser Arbeit wichtige Simulationsrechnungen durchgeführt, ein Messaufbau zum experimentellen Test eines neuartigen Konzepts zur Feld-Stabilisierung ausgelegt, in Betrieb genommen und anhand von Messungen an einem speziell dafür entwickelten Resonatormodell verifiziert.
Ziel dieser Arbeit war es die experimentelle Demonstration des neuen Konzepts zur Feldstabilisierung eines Resonators. Es sollte geprüft werden, ob die zuvor durchgeführten Simulationen die realen Felder hinreichend zuverlässig vorhersagen. Diese experimentelle Prüfung ist angesichts der sehr hohen Baukosten eines realen Resonators von mehreren Millionen Euro unerlässlich. Vor Beginn dieser Arbeit war ein geeigneter Messaufbau, d.h. im Wesentlichen ein dediziertes Resonator-Modell, nicht verfügbar. Es galt ein Modell zu entwickeln, dessen Geometrie seht gut durch Simulationen modelliert werden kann, dessen Aufbau es aber trotzdem gestattet, eben diese Geometrie lokal zu variieren, um den angestrebten Effekt der Feld-Stabilisierung zu erreichen.
Aufgrund von Fertigungs- sowie Justage-Toleranzen gibt es Störungen der Feldhomogenität auf der Strahl- bzw. Resonatorachse. Die Feldhomogenität quantifiziert die Fluktuationen der tatsächlichen Feldstärke bezüglich des Idealwertes. Ein perfekt homogenes Feld weist keine Abweichungen auf. Bei einer lokalen Störung ist die Feldveränderung am Ort der Störung maximal und verringert sich mit dem Abstand von dieser. Es entsteht eine Verkippung des Feldes. Die Feldverkippung ist definiert als die durch die Störung verursachte Feldabweichung normiert auf die ungestörte Feldverteilung sowie auf die damit verbundene Änderung der Modenfrequenz. Letztere wird mit Tauchkolben kompensiert; die Feldhomogenität allerdings kann nicht wieder hergestellt werden. Die Feldhomogenität muss durch eine andere Maßnahme sichergestellt werden. Bei Alvarez-Kavitäten mit einem Tankradius R < 0,4m werden „post-coupler“ eingesetzt. Post-coupler sind dünne zylinderförmige Kupferstangen die seitlich an die Driftröhren herangefahren werden und an die Resonanzmode des Beschleunigers koppeln. Gleichzeitig wird die Sensibilität auf Störungen im Tank verringert, sodass die homogene Feldverteilung auch bei Störungen gut erhalten bleibt. Bei Beschleunigerstrukturen mit größeren Tankradien werden die post-coupler zu lang und erfordern einen zu großen Aufwand in der Konstruktion. In dieser Arbeit wurde eine alternative Methode für die Stabilisierung der Feldverteilung untersucht, welche die Winkelposition der Driftröhrenstützen nutzt.
Der in dieser Arbeit realisierte Resonator erlaubt die freie Einstellung der Winkel der Stützen sowie die exakte Justage der Driftröhren auf der Strahlachse. Es wurde ein Aluminium-Modell im Maßstab 1:3 zum realen Alvarez-Resonator gebaut. Dieser hatte zunächst eine Länge von ∼ 525mm und neun Driftröhren. Das Modell ist mit einem Profil der Geschwindigkeit der zu beschleunigenden Ionen ausgestattet, sodass die Driftröhren sowie die Spaltabstände entlang des Resonators länger werden. Mittels Simulationen wurden diverse Stützenkonfigurationen ausgewählt, die in den Messungen getestet wurden.
Mit dem Modell konnte gezeigt werden, dass bei bestimmten Stützenanordnungen die nächst höheren Moden weiter von der Betriebsmode entfernt werden können. Die besten Ergebnisse lieferte die Stützenkonfiguration mit fünf nach unten und vier nach oben orientierten Stützenpaaren (V-Stützen-Konfiguration 5+4). Hier liegt die nächst höhere Mode in den Messungen um mehr als 160MHz von der Grundfrequenz (326,7MHz) entfernt (Vergleich originale V-Stützen-Konfiguration: nächste Mode liegt 88MHz von der Grundmode entfernt). Wichtig ist die Eigenschaft der Modenseparation vor allem für den realen Einsatz der Kavität, da hier die Moden nur um wenige MHz voneinander entfernt liegen und dies zu Störungen im Betrieb des Resonators bei hoher HF-Leistung führen kann. Bei ungenügender Modenseparation wird die eingekoppelte HF-Leistung vom Resonator reflektiert. Mitunter können die erforderlichen Felder der Betriebsmode nicht erzeugt werden.
Im Falle einer Feldverkippung stimmt die reale Ionengeschwindigkeit entlang des Tanks nicht mehr mit der bei der Auslegung angenommenen überein. Das führt zu einer Verringerung der longitudinalen Strahlqualität bezüglich der erreichbaren Energieschärfe.
Zur systematischen Prüfung der Methode zur Feldstabilisierung wurden definierte Störungen in den Tank eingebaut. Die erste Driftröhre wurde jeweils um 1, 2 und 3mm verlängert. Da die Zahl der Zellen zu gering war für die statistisch signifikante Feldverkippungs-Messung, musste das Modell auf 21 Spalte erweitert werden. Die besten Ergebnisse bzgl. Feld-Stabilisierung lieferte die V-Stützen-Konfiguration 7+7+6. Hier bleibt das Feld trotz Störstelle homogen. Die Feldverkippung kann auf weniger als die Hälfte derjenigen der originalen V-Stützen-Konfiguration reduziert werden. Für den Fall der originalen Stützenkonfiguration erzeugt die oben beschriebene Störung eine Abweichung der Feldhomogenität von ±28%. Mit der in dieser Arbeit optimierten Stützenkonfiguration verändert sich die Feldhomogenität nur um ±9%.
Die Methode zur Feldstabilisierung mit einer optimierten Stützenanordnung ohne den Einsatz von post-couplern konnte am Modell gezeigt werden. Weiterhin wurde eine bessere Effizienz mit Zunahme der Tanklänge verifiziert. Im realen Alvarez-Tank wird die Anzahl der Spalte um einen Faktor 3 größer sein. Damit ergeben sich durch die erhöhte Anzahl zur Verfügung stehenden Stützen zusätzliche Konfigurationen, um eine Feldhomogenität von besser als ±1% zu gewährleisten.
Auf der Basis dieser Untersuchungen ist bei GSI der Bau einer zunächst ca. 2m langen Sektion des neuen Alvarez-DTL mit 11 Driftröhren vorgesehen. Dabei werden Flansche für verschiedene Stützenkonfigurationen integriert. Ziel ist es hierbei die Konstruktion, die Produktion, die Feldabstimmung sowie den Betrieb bei nominalen FAIR-Parametern zu testen. Sind die Tests erfolgreich, kommt diese Sektion bei der ersten Serie für den neuen Beschleuniger zum Einsatz.