Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
Ziel der durchgeführten Experimente war es, die Zerfallsmechanismen Van-der-Waals gebundener Argon- und Neon Di- und Trimere in intensiven Laserfeldern zu untersuchen, um mehr über den Einfluss der schwachen Van-der-Waals Bindung auf die Dynamik des Ionisationsprozesses zu erfahren. Da Dimere aufgrund ihrer elektronischen Struktur sehr stark zwei separaten benachbarten Atomen gleichen, vereinen sie atomare und molekulare Eigenschaften in sich und ihre Untersuchung verspricht ein tieferes Verständnis der Wechselwirkungsmechanismen in starken Laserfeldern. Die Verwendung der Impulsspektroskopie Methode COLTRIMS ermöglichte die koinzidente Messung aller beim Aufbruch entstandener ionischer Fragmente sowie eines elektronischen Impulsvektors. Für die beidseitige Einfachionisation des Argon Dimers, konnten bei der gewählten Intensität (etwa 3.3E14W/cm2) drei unterschiedliche Ionisationsprozesse identifiziert werden, von denen zwei zu einer überraschend hohen kinetischen Gesamtenergie der Ionen führen. Aufgrund der Messung der Winkelverteilung der ionischen Fragmente und eines der emittierten Elektronen für lineare und zirkulare Polarisation gelang es, die den drei Prozessen zugrunde liegende Dynamik im Laserfeld zu entschlüsseln. Der dominierende Zerfallskanal stellt demzufolge eine schnelle sequentielle Doppelionisation des Argon Dimers dar, die noch am Gleichgewichtsabstand des Dimers stattfindet. Für den zweithäufigsten Ionisationsprozess ergaben sich zwei mögliche Erklärungsansätze: Entweder wird das Dimer zunächst einseitig doppelionisiert, so dass es auf einer attraktiven Potentialkurve zusammenläuft, bevor es zu einem späteren Zeitpunkt – wenn das Laserfeld bereits abgeklungen ist – durch eine Umverteilung seiner Ladungen in einer Coulomb Explosion fragmentiert, oder das Dimer wird bei einer beidseitigen Tunnelionisation zugleich angeregt, so dass die Coulomb Explosion von einer Potentialkurve erfolgt, die wesentlich steiler als 1/R verläuft. Der schwächste Zerfallskanal, der sich durch die höchste Gesamtenergie auszeichnet, ist auf eine "Frustrated Triple Tunnel Ionization" zurückzuführen, bei der ein hoch angeregter Rydberg Zustand erzeugt wird. Bei der Untersuchung des Neon Dimers konnte bei der gewählten Intensität (etwa 6.3E14W/cm2) nur die sequentielle beidseitige Einfachionisation identifiziert werden, obwohl die Daten Hinweise auf einen weitern Ionisationsprozess mit sehr geringer Statistik aufweisen. Zudem wurde in dieser Arbeit nach der Methode des Coulomb-Explosion-Imaging aus den in Koinzidenz gemessenen Impulsvektoren aller einfachgeladenen ionischen Fragmente eines Aufbruchs die geometrische Struktur der Cluster im Orts-und Impulsraum rekonstruiert. Die ermittelte Grundzustandswellenfunktion des Argon und Neon Dimers zeigt eine gute Übereinstimmung mit quantenmechanischen Berechnungen. Für das Argon und Neon Trimer konnten aus den gemessenen Impulsvektoren mittels einer numerischen Simulation die Bindungswinkel im Ortsraum bestimmt werden, so dass erstmals gezeigt werden konnte, dass diese Trimere gleichseitige Dreieckskonfigurationen aufweisen. Vergleiche mit theoretischen Berechnungen zeigen für die breite Winkelverteilung des Neon Trimers eine hervorragende Übereinstimmung, während die gemessene Winkelverteilung des Argon Trimers etwas breiter als die berechnete ist.
Artificial intelligence in heavy-ion collisions : bridging the gap between theory and experiments
(2023)
Artificial Intelligence (AI) methods are employed to study heavy-ion collisions at intermediate collision energies, where high baryon density and moderate temperature QCD matter is produced. The experimental measurements of various conventional observables such as collective flow, particle number fluctuations, etc. are usually compared with expensive model calculations to infer the physics governing the evolution of the matter produced in the collisions. Various experimental effects and processing algorithms can greatly affect the sensitivity of these observables. AI methods are used to bridge this gap between theory and experiments of heavy-ion collisions. The problems with conventional methods of analyzing experimental data are illustrated in a comparative study of the Glauber MC model and the UrQMD transport model. It is found that the centrality determination and the estimated fluctuations of the number of participant nucleons suffer from strong model dependencies for Au-Au collisions at 1.23 AGeV. This can bias the results of the experimental analysis if the number of participant nucleons used is not consistent throughout the analysis and in the final model-to-data comparison. The measurable consequences of this model dependence of the number of participant nucleons are also discussed. In this context, PointNet-based AI models are developed to accurately reconstruct the impact parameter or the number of participant nucleons in a collision event from the hits and/or reconstructed track of particles in 10 AGeV Au-Au collisions at the CBM experiment. In the last part of the thesis, different AI methods to study the equation of state (EoS) at high baryon densities are discussed. First, a Bayesian inference is performed to constrain the density dependence of the EoS from the available experimental measurements of elliptical flow and mean transverse kinetic energy of mid rapidity protons in intermediate energy collisions. The UrQMD model was augmented to include arbitrary potentials (or equivalently the EoSs) in the QMD part to provide a consistent treatment of the EoS throughout the evolution of the system. The experimental data constrain the posterior constructed for the EoS for densities up to four times saturation density. However, beyond three times saturation density, the shape of the posterior depends on the choice of observables used. There is a tension in the measurements at a collision energy of about 4 GeV. This could indicate large uncertainties in the measurements, or alternatively the inability of the underlying model to describe the observables with a given input EoS. Tighter constraints and fully conclusive statements on the EoS require accurate, high statistics data in the whole beam energy range of 2-10 GeV, which will hopefully be provided by the beam energy scan programme of STAR-FXT at RHIC, the upcoming CBM experiment at FAIR, and future experiments at HIAF and NICA. Finally, it is shown that the PointNet-based models can also be used to identify the equation of state in the CBM experiment. Despite the uncertainties due to limited detector acceptance and biases in the reconstruction algorithms, the PointNet-based models are able to learn the features that can accurately identify the underlying physics of the collision. The PointNet-based models are an ideal AI tool to study heavy-ion collisions, not only to identify the geometric event features, such as the impact parameter or the number of participant nucleons, but also to extract abstract physical features, such as the EoS, directly from the detector outputs.
Landau's Fermi liquid theory has been the main tool for investigating interactions between fermions at low energies for more than 50 years. It has been successful in describing, amongst other things, the mass enhancement in ³He and the thermodynamics of a large class of metals. Whilst this in itself is remarkable given the phenomenological nature of the original theory, experiments have found several materials, such as some superconducting and heavy-fermion materials, which cannot be described within the Fermi liquid picture. Because of this, many attempts have been made to understand these ''non Fermi liquid'' phases from a theoretical perspective. This will be the broad topic of the first part of this thesis and will be investigated in Chapter 2, where we consider a two-dimensional system of electrons interacting close to a Fermi surface through a damped gapless bosonic field. Such systems are known to give rise to non Fermi liquid behaviour. In particular we will consider the Ising-nematic quantum critical point of a two-dimensional metal. At this quantum critical point the Fermi liquid theory breaks down and the fermionic self-energy acquires the non Fermi liquid like {omega}²/³ frequency dependence at lowest order and within the canonical Hertz-Millis approach to quantum criticality of interacting fermions. Previous studies have however shown that, due to the gapless nature of the electronic single-particle excitations, the exponent of 2/3 is modified by an anomalous dimension {eta_psi} which changes, not only the exponent of the frequency dependence, but also the exponent of the momentum dependence of the self-energy. These studies also show that the usual 1/N-expansion breaks down for this problem. We therefore develop an alternative approach to calculate the anomalous dimensions based on the functional renormalization group, which will be introduced in the introductory Chapter 1. Doing so we will be able to calculate both the anomalous dimension renormalizing the exponent of the frequency dependence and the exponent renormalizing the momentum dependence of the self-energy. Moreover we will see that an effective interaction between the bosonic fields, mediated by the fermions, is crucial in order to obtain these renormalizations.
In the second part of this thesis, presented in Chapter 3, we return to Fermi liquid theory itself. Indeed, despite its conceptual simplicity of expressing interacting electrons through long-lived quasi-particles which behave in a similar fashion as free particles, albeit with renormalized parameters, it remains an active area of research. In particular, in order to take into account the full effects of interactions between quasi-particles, it is crucial to consider specific microscopic models. One such effect, which is not captured by the phenomenological theory itself, is the appearance of non-analytic terms in the expansions of various thermodynamic quantities such as heat-capacity and susceptibility with respect to an external magnetic field, temperature, or momentum. Such non-analyticities may have a large impact on the phase diagram of, for example, itinerant electrons near a ferromagnetic quantum phase transition. Inspired by this we consider a system of interacting electrons in a weak external magnetic field within Fermi liquid theory. For this system we calculate various quasi-particle properties such as the quasi-particle residue, momentum-renormalization factor, and a renormalization factor which relates to the self-energy on the Fermi surface. From these renormalization factors we then extract physical quantities such as the renormalized mass and renormalized electron Lande g-factor. By calculating the renormalization factors within second order perturbation theory numerically and analytically, using a phase-space decomposition, we show that all renormalization factors acquire a non-analytic term proportional to the absolute value of the magnetic field. We moreover explicitly calculate the prefactors of these terms and find that they are all universal and determined by low-energy scattering processes which we classify. We also consider the non-analytic contributions to the same renormalization factors at finite temperatures and for finite external frequencies and discuss possible experimental ways of measuring the prefactors. Specifically we find that the tunnelling density of states and the conductivity acquire a non-analytic dependence on magnetic field (and temperature) coming from the momentum-renormalization factor. For the latter we discuss how this relates to previous works which show the existence of non-analyticities in the conductivity at first order in the interaction.
For finite baryon chemical potential, conventional lattice descriptions of quantum chromodynamics (QCD) have a sign problem which prevents straightforward simulations based on importance sampling.
In this thesis we investigate heavy dense QCD by representing lattice QCD with Wilson fermions at finite temperature and density in terms of Polyakov loops.
We discuss the derivation of $3$-dimensional effective Polyakov loop theories from lattice QCD based on a combined strong coupling and hopping parameter expansion, which is valid for heavy quarks.
The finite density sign problem is milder in these theories and they are also amenable to analytic evaluations.
The analytic evaluation of Polyakov loop theories via series expansion techniques is illustrated by using them to evaluate the $\SU{3}$ spin model.
We compute the free energy density to $14$th order in the nearest neighbor coupling and find that predictions for the equation of state agree with simulations to $\mathcal{O}(1\%)$ in the phase were the (approximate) $Z(3)$ center symmetry is intact.
The critical end point is also determined but with less accuracy and our results agree with numerical results to $\mathcal{O}(10\%)$.
While the accuracy for the endpoint is limited for the current length of the series, analytic tools provide valuable insight and are more flexible.
Furthermore they can be generalized to Polyakov-loop-theories with $n$-point interactions.
We also take a detailed look at the hopping expansion for the derivation of the effective theory.
The exponentiation of the action is discussed by using a polymer expansion and we also explain how to obtain logarithmic resummations for all contributions, which will be achieved by employing the finite cluster method know from condensed matter physics.
The finite cluster method can also be used to evaluate the effective theory and comparisons of the evaluation of the effective action and a direction evaluation of the partition function are made.
We observe that terms in the evaluation of the effective theory correspond to partial contractions in the application of Wick's theorem for the evaluation of Grassmann-valued integrals.
Potential problems arising from this fact are explored.
Next to next to leading order results from the hopping expansion are used to analyze and compare the onset transition both for baryon and isospin chemical potential.
Lattice QCD with an isospin chemical potential does not have a sign problem and can serve as a valuable cross-check.
Since we are restricted by the relatively short length of our series, we content ourselves with observing some qualitative phenomenological properties arising in the effective theory which are relevant for the onset transition.
Finally, we generalize our results to arbitrary number of colors $N_c$.
We investigate the transition from a hadron gas to baryon condensation and find that for any finite lattice spacing the transition becomes stronger when $N_c$ is increased and to be first order in the limit of infinite $N_c$.
Beyond the onset, the pressure is shown to scale as $p \sim N_c$ through all available orders in the hopping expansion, which is characteristic for a phase termed quarkyonic matter in the literature.
Some care has to be taken when approaching the continuum, as we find that the continuum limit has to be taken before the large $N_c$ limit.
Although we currently are unable to take the limits in this order, our results are stable in the controlled range of lattice spacings when the limits are approached in this order.
The challenging intricacies of strongly correlated electronic systems necessitate the use of a variety of complementary theoretical approaches. In this thesis, we analyze two distinct aspects of strong correlations and develop further or adapt suitable techniques. First, we discuss magnetization transport in insulating one-dimensional spin rings described by a Heisenberg model in an inhomogeneous magnetic field. Due to quantum mechanical interference of magnon wave functions, persistent magnetization currents are shown to exist in such a geometry in analogy to persistent charge currents in mesoscopic normal metal rings. The second, longer part is dedicated to a new aspect of the functional renormalization group technique for fermions. By decoupling the interaction via a Hubbard-Stratonovich transformation, we introduce collective bosonic variables from the beginning and analyze the hierarchy of flow equations for the coupled field theory. The possibility of a cutoff in the momentum transfer of the interaction leads to a new flow scheme, which we will refer to as the interaction cutoff scheme. Within this approach, Ward identities for forward scattering problems are conserved at every instant of the flow leading to an exact solution of a whole hierarchy of flow equations. This way the known exact result for the single-particle Green's function of the Tomonaga-Luttinger model is recovered.
Atomistic molecular dynamics approach for channeling of charged particles in oriented crystals
(2015)
Der Gitterführungseffekt ist der Prozess der Ausbreitung von geladenen Teilchen entlang der Ebenen oder Achsen von kristallinen Materialien. Seit den 1960er Jahren ist dieser Effekt weitgehend theoretisch und experimentell untersucht worden. Dieser Effekt wurde für die Manipulation von Hochenergiestrahlen, die Hochpräzisionsstruktur- und -fehleranalyse von kristallinen Medien und die Herstellung von hochenergetischer Strahlung angewendet. Zur Abstimmung der Parameter der Gitterführung und Gitterführungsstrahlung wurde dieser Prozess für den Fall von künstlich nanostrukturierten Materialien, wie gebogenen Kristallen, Nanoröhren und Fullerit, angenommen. In den letzten Jahren wurde das Konzept des kristallinen Undulators formuliert und getestet, das besondere Eigenschaften der Strahlung aufgrund der Gitterführung von Projektilen in regelmäßig gebogenen Kristallen vorhersagt.
In dieser Arbeit werden die Prozesse der Gitterführung von Sub- und Multi-GeV-Elektronen und -Positronen durch den atomistischen Molekulardynamik-Ansatz untersucht. Die Ergebnisse dieser Studien wurden in einer Reihe von Artikeln während meiner Promotion in Frankfurt vorgestellt. Dieser Ansatz ermöglicht die Simulation komplexer Fälle von Gitterführung in geraden, gebogenen und periodisch gebogenen Kristallen aus reinen kristallinen Materialien und von gemischten Materialien wie Si-Ge-Kristallen, in mehrschichtigen und nanostrukturierten kristallinen Systemen. Die Arbeit beschreibt die Methode der Simulationen, stellt Ergebnisse von Simulationen für verschiedene Fälle vor und vergleicht die Ergebnisse von Simulationen mit aktuellen experimentellen Daten. Die Ergebnisse werden mit Schätzungen der dechanneling-Länge verglichen, dem Anteil der gittergeführten Projektile, der Winkelverteilung der ausgehenden Projektile und des Strahlungsspektrums.
In dieser Arbeit werden grundlegende Untersuchungen zur Ion-Festkörper Wechselwirkung vorgestellt, die zu Sekundärionen-Emissionsprozessen führen. Das Ziel ist hierbei, aus den Experimenten Informationen über den Ursprung, die Bindungsmechanismen und die Evolution der Sekundärionen (SI) zu erhalten und die experimentellen Daten mit Rechnungen eines kürzlich entwickelten Desorptions-Modells zu vergleichen. Die Untersuchungen sind in zwei Gebiete unterteilt, die 1.) den Einfluß von Projektil-Eigenschaften wie Energie, Masse und Ladung auf die SI-Emission und 2.) den Einfluß von Targeteigenschaften wie Temperatur und Material auf die SI-Emission zum Gegenstand haben. Die gemessenen H+- - und CxH+- y -SI entstammen einer Oberflächen-Kontaminationsschicht der untersuchten C- und LiF-Targets. Die untersuchten Li+-SI entstammen unmittelbar der LiF-Oberfläche. Zum Studium der SI-Emission werden hier H-, C-, N-, Ar-, Kr- und Sn-Projektile, im Bereich ihres maximalen elektronischen Bremsvermögens Se = (dE=dx)e, eingesetzt. Die von der Projektil-Eintrittsoberfläche emittierten SI werden in Koinzidenz mit jenen unter Hochvakuum-Bedingungen mit einem zylindrischen und einem neu konstruierten linearen Flugzeitspektrometer gemessen. Die Abhängigkeit der SI-Emission von der Projektilgeschwindigkeit (”Geschwindigkeitseffekt”) wird hervorragend durch ein kürzlich von Pereira und da Silveira [Per98a, Per00] entwickeltes Desorptions-Modell beschrieben und zeigt, daß leichte H+-SI einen anderen Emissionsort als schwere CxH+- y -SI entstammen. Diese Resultate werden durch Messungen, die den Einfluß des Projektilladungszustands auf die SI-Ausbeute betrachten, bestätigt. Eine ladungsabhäangige Modifikation des neuen Desorptions-Modells erlaubt zusätzlich, aus den gemessenen relativen SI-Ausbeuten, den Abstand des Emissionsortes von der Spurachse des Projektils zu bestimmen. Aus Untersuchungen zum Einfluß der Projektilmasse auf die SI-Emission folgt zudem eine Korrelation im Emissionsverhalten zwischen H+-SI der Kontaminationsschicht und Li+-SI der tatsächlichen Targetoberfläche. Der Grund hierfür liegt im gleichen Emissionsort dieser beiden unterschiedlichen SI, der von ihrer Bindungsenergie an der Targetoberfläche abhängt. Kontrollierte Variation der LiF- und Cu-Targettemperatur mit einem neu konstruiertem Targethalter zeigen, daß H+-SI im Bereich von 300K <= T <= 380K nahezu vollständig und unabhängig vom Targetmaterial aus der CxHy-Oberflächen-Kontaminationschicht emittiert werden. Durch die Anpassung von Langmuir-Isothermen an die gemessenen SI-Ausbeuten gelingt die Bestimmung der Bindungsenergien EB der CxH+ y -SI, die unmittelbar die LiF- bzw. Cu-Oberfläche bedecken. Das weist auf intermolekulare Bindungen zwischen den CxH+ y -SI und der Oberfläche hin. Die Resultate dieser Rechnung zeigen auch, daß die CxH+ y -SI aus unterschiedlichen Emissionsorten emittiert werden. Hohe Targettemperaturen (< 450K) führen überraschenderweise beim LiF-Target zusätzlich zu einer Metallisierung der Oberfläche, die sich bei weiterer Temperaturerhöhung als Phasenübergang des Targetmaterials auswirkt. Messungen an deuterierten und hydrogenierten Targets zeigen zudem, daß SI-Emission aus dem Targetvolumen nur beim Überschreiten einer hohen Emissionsschwelle Se(> 1700 +- 50eV=A° ) erfolgt.
In dieser Arbeit werden grundlegende Untersuchungen zum Verständnis der dynamischen Wechselwirkungsmechanismen atomarer Projektile mit Festkörperoberflächen vorgestellt, die zur Emission von Sekundärionen führen. Der zentrale Ansatzpunkt ist dabei die Vermessung der Dynamik über die geschwindigkeits- und winkeldifferentielle Verteilung der emittierten Sekundärionen. Dazu wurde ein neuartiges Spektrometer entwickelt, in dem jedes in einem homogenen elektrischen Feld abgelenkte Sekundärion durch seine Flugzeit (TOF) und den Auftreffort auf einen 2-dimensionalen (XY) ortsempfindlichen Detektor charakterisiert wird. Das Prinzip basiert auf dem in Gastargetexperimenten erfolgreich eingesetzten Frankfurter Meßsystem COLTRIMS (COLd Target Recoil Ion Momentum Spectroscopy). Dieses System wurde weiterentwickelt und erstmalig in Frankfurt in einem Festkörperexperiment zur geschwindigkeits- und winkeldifferentiellen Spektrometrie von Sekundärionen angewendet. Ein zusätzliches Merkmal gegenüber herkömmlichen Spektrometern ist die Möglichkeit der einfachen Variation des Einfallswinkels 0p vom Projektil zum Target. Die korrekte Transformation der gemessenen Daten in eine 3-dimensionale Anfangsgeschwindigkeitsverteilung bedingt eine möglichst präzise Eichung des Spektrometers. Dazu wurde die in diesem Zusammenhang neuartige Methode des Strahlprofilmonitors entwickelt und eingesetzt. Durch die Wechselwirkung des Projektils mit einem nicht lokalisierten Gastarget erzeugt es auf seinem Weg durch das Spektrometer eine Spur aus Ionen. Die Gasionen befinden sich im Verhältnis zu den von dem Festkörper emittierten Sekundärionen nahezu in Ruhe. Daher kann über die Analyse der Projektilspur auf die zur Eichung notwendigen, aber im Experiment nicht direkt zugänglichen Parameter, wie Flugzeit (T0) und Auftreffort (x0/y0) für Teilchen mit der Geschwindigkeit v0z = v0x = v0y = 0, geschlossen werden. Die systematische Variation von Projektil- (He0/N0/Ar0, Ep = 0.2 - 2.2 MeV, 0p = 37°-78° relativ zur Oberflächennormalen) und Targeteigenschaften (Au/C/LiF/Al) erlaubt ein gezieltes Studium der dynamischen Wechselwirkung zwischen Projektilen und Festkörperoberflächen. Das untersuchte H+-Sekundärion entstammt einer Festkörperoberfläche bedeckenden quasistabilen Kontaminationsschicht, die im wesentlichen aus den Adsorbaten H2, H2O, CxHy besteht. Die gemessenen H+-Geschwindigkeitsverteilungen besitzen ein Maximum etwa bei v0 ungefähr gleich 25-35 km/s mit Ausläufern (abhängig von 0p) bis hin zu 240 km/s. Bei sinkender Projektilgeschwindigkeit zeigt die Verteilung der emittierten H+-Sekundärionen bei hohen Emissionsgeschwindigkeiten (v0 > 60 km/s) eine stark ausgeprägte Asymmetrie in der von dem einfallenden Projektil und der Oberflächennormalen definierten Ebene. Ionen werden mit einer hohen Geschwindigkeit (bis zu 140 km/s bei 0p = 45°) unter einem Winkel von ca. 90° zum Projektil, unabhängig von 0p, emittiert. Diese Asymmetrie wird durch eine binäre Kollision des Projektils mit dem Wasserstoff verursacht. Die Variation der Projektilgeschwindigkeit ist korreliert mit der deponierten Energie des Projektils im Festkörper. Daher kann in der Dynamik der Sekundärionen deutlich der Beitrag des nuklearen Anteils an der totalen Energiedeposition aufgezeigt und getrennt werden. Bei Emissionsgeschwindigkeiten v0 < 60 km/s zeigt sich eine starke Abhängigkeit von den Targeteigenschaften. Bei konstantem Einfallswinkel beobachten wir eine Verschiebung der Maxima von v0 max ungefähr gleich 26.5 km/s bei Au-, über 27.9 km/s bei Al- bis hin zu 32.5 km/s bei LiF-Targets. Es zeigt sich keine meßbare Abhängigkeit vom Einfallswinkel des Projektils bei Auund C-Targets, dagegen eine deutliche Verschiebung der Maxima hin zu größeren Geschwindigkeiten bei dem Al- (v0 max ungefähr gleich 27.5 km/s - 30 km/s) und dem LiF-Target (v0 max ungefähr gleich 32.5 km/s - 35.5 km/s) mit einer Vergrößerung von 0p. Ionen mit v0 < 30 km/s werden zum Großteil rückwärts in Richtung des einfallenden Projektils emittiert. Au und C sind gute, LiF und das mit einer Al2O3-Schicht überzogene Al dagegen schlechte elektrische Oberflächenleiter. Die Verschiebung der Verteilungen bei einem schlechten elektrischen Leiter ist ein Hinweis auf den zeitabhängigen Zerfall des Projektilspurpotentials im Festkörper. Die Zunahme der Emissionsgeschwindigkeit v0 bei Vergrößerung von 0p ist in der Vergrößerung der effektiven Targetdicke begründet und ein Hinweis auf eine targetdickenabhängige Neutralisationszeit des geladenen Spurkerns durch Elektronen des Substrats. Korrelationen im Sekundärionenemissionsprozeß bezüglich Impuls- und Energieerhaltung zwischen einem emittierten H+-Sekundärion und einem möglichen zweiten Sekundärion wurden nicht beobachtet. Über die Eichung hinaus eröffnen sich zusätzlich noch einige vielversprechende Anwendungsmöglichkeiten des Strahlprofilmonitors. Zum einen ermöglicht er a) in der Gasmassenspektrometrie eine exakte Korrektur der Ionenflugzeit unabhängig vom Ort der Ionisation und zum anderen bildet er b) eine innovative Methode zur Kartographie lokaler elektrischer Felder und c) ferner einen alternativen Zugang zur Vermessung von Projektilstreuwinkeln. Die Verwendung eines ortsempfindlichen Detektors in der „kinematischen“ Materialanalyse verbindet simultan gute Tiefenprofilauflösung mit dem Nachweis eines großen Raumwinkels zugunsten einer besseren Statistik. Die Kenntnis der Emissionscharakteristik bewährt sich zudem in der Massenanalyse in der Unterscheidung von Ionen fast identischer Massen.
Ziel der vorliegenden Arbeit ist der Aufbau von koaxialen Plasmabeschleunigern und deren Verwendung für die Untersuchung der Eigenschaften von kollidierenden Plasmen. Zukünftig sollen diese kollidierenden Plasmen als intensive Strahlungsquelle im Bereich der ultravioletten (UV-) und vakuumultravioletten (VUV-)Strahlung sowie in der Grundlagenforschung als Target zur Ionenstrahl-Plasma-Wechselwirkung Verwendung finden. Für diese Anwendungen steht dabei eine Betrachtung der physikalischen Grundlagen im Vordergrund. So sind neben der Kenntnis der Plasmadynamik auch Aussagen bezüglich der Elektronendichte, der Elektronentemperatur und der Strahlungsintensität von Bedeutung. Im Einzelnen konnte gezeigt werden, dass es möglich ist, durch eine Plasmakollision die Elektronendichte des Plasmas im Vergleich zu der eines einzelnen Plasmas deutlich zu erhöhen - im Maximalfall um den Faktor vier. Gleichzeitig stieg durch die Plasmakollision die Lichtintensität im Wellenlängenbereich der UV- und VUV-Strahlung um den Faktor drei an...
Die vorliegende Arbeit handelt von der Entwicklung, dem Bau, den Zwischenmessungen sowie den abschließenden Tests unter kryogenen Bedingungen einer neuartigen, supraleitenden CH-Struktur für Strahlbetrieb mit hoher Strahllast. Diese Struktur setzt das Konzept des erfolgreich getesteten 19-zelligen 360 MHz CH-Prototypen fort, der einen weltweiten Spitzenwert in Bezug auf Beschleunigungsspannung im Niederenergiesegment erreichte, jedoch wurden einige Aspekte weiterentwickelt bzw. den neuen Rahmenbedingungen angepasst. Bei dem neuen Resonator wurde der Schwerpunkt auf ein kompaktes Design, effektives Tuning, leichte Präparationsmöglichkeiten und auf den Einsatz eines Leistungskopplers für Strahlbetrieb gelegt. Die Resonatorgeometrie besteht aus sieben Beschleunigungszellen, wird bei 325 MHz betrieben und das Geschwindigkeitsprofil ist auf eine Teilcheneingangsenergie von 11.4 MeV/u ausgelegt. Veränderungen liegen in der um 90° gedrehten Stützengeometrie vor, um Platz für Tuner und Kopplerflansche zu gewährleisten, und in der Verwendung von schrägen Stützen am Resonatorein- und ausgang zur Verkürzung der Tanklänge und Erzielung eines flachen Feldverlaufs. Weiterhin wurden pro Tankdeckel zwei zusätzliche Spülflansche für die chemische Präparation sowie für die Hochdruckspüle mit hochreinem Wasser hinzugefügt. Das Tuning der Kavität erfolgt über einen neuartigen Ansatz, indem zwei bewegliche Balgtuner in das Resonatorvolumen eingebracht werden und extern über eine Tunerstange ausgelenkt werden können. Der Antrieb der Stange soll im späteren Betrieb wahlweise über einen Schrittmotor oder einen Piezoaktor stattfinden. Für ein langsames/ statisches Tuning kann der Schrittmotor den Tuner im Bereich +/- 1 mm auslenken, um größeren Frequenzabweichungen in der Größenordnung 100 kHz nach dem Abkühlen entgegenzuwirken. Das schnelle Tuning im niedrigen kHz-Bereich wird von einem Piezoaktor übernommen, welcher den Balg um einige µm bewegen kann, um Microphonics oder Lorentz-Force-Detuning zu kompensieren. Der Resonator wird von einem aus Titan bestehendem Heliummantel umgeben, wodurch ein geschlossener Heliumkreislauf gebildet wird.
Derzeit befinden sich mehrere Projekte in der Planung bzw. im Bau, welche auf eine derartige Resonatorgeometrie zurückgreifen könnten. An der GSI basiert der Hauptteil des zukünftigen cw LINAC auf supraleitenden CH-Strukturen, um einen Strahl für die Synthese neuer, superschwerer Elemente zu liefern. Weiterhin könnte ein Upgrade des vorhandenen GSI UNILAC durch den Einsatz von supraleitenden CH-Resonatoren gestaltet werden. Zudem besteht die Möglichkeit, die bisherige Alvarez-Sektion des UNILAC alternativ durch eine kompakte, supraleitende CH-Sektion zu realisieren. Ebenfalls sollen die beiden parallelbetriebenen Injektorsektionen des MYRRHA-Projektes durch den Einsatz von supraleitenden CH-Strukturen erfolgen.
In der vorliegenden Arbeit wird das Auslesekonzept der Driftkammern untersucht und seine Integration in das HADES Datenaufnahmesystem beschrieben. Bedingt durch das mehrstufige Triggersystem und die hohen Anforderungen an die Geschwindigkeit des Systems wurden Methoden zur Datenreduktion entwickelt. Dadurch ist es möglich, die Daten von allen 27 000 Kanälen innerhalb von 10 µs nach dem Trigger auszulesen. Die Daten werden innerhalb von ungefähr 40 ns nach dem Signal der zweiten Triggerstufe weitertransportiert. Im Rahmen der Untersuchungen zur Überwachung der Driftkammerdaten, die im zweiten Teil der Arbeit beschrieben werden, wurde mit der verwendeten Methode zur Bestimmung der intrinsischen Auflösung eine deutliche Verschlechterung Auflösung der Kammern festgestellt, von 120 µm im November 2001 auf über 200 µm im September 2003. Als Ursache hierfür wurde zum einen die geänderte Kalibrationsmethode ausgemacht, die die Laufzeiten der Signale nicht mehr berücksichtigt, zum anderen eine Änderung der Driftgeschwindigkeit aufgrund einer nicht optimalen Hochspannung. Die Methode zur Bestimmung des physikalischen Zentrums der Kammern erlaubt eine Aussage über die Position der Kammern relativ zur Sollposition. Die dabei gefundenen Verschiebungen entlang der z - Achse stimmen für einen Teil der Sektoren mit den im Rahmen des Alignments ermittelten Werten für die Verschiebung des Targets überein. Für die anderen Sektoren ergeben sich zusätzlicher Verschiebungen um 2 bis 6 cm. Das Di - Leptonen - Spektrometer HADES (High Acceptance Di -Elektron-Spektrometer) am Schwerionensynchrotron der Gesellschaft für Schwerionenforschung (Darmstadt) beginnt nun mit detaillierten Studien leptonischer Zerfälle von Vektormesonen in Kern - Kern - Stößen mit Projektilenergien von 1 bis 2 GeV / Nukleon. Dabei liegt der Schwerpunkt auf der Untersuchung von Zerfällen, die in der Phase hoher Dichte (ungefähr 3 · p..0) und hoher Temperatur stattfinden. Es wird erwartet, daß sich aus der dabei zu beobachtenden Massenverteilung der unterhalb der Schwelle produzierten leichten Vektormesonen r, o und ph ein Hinweis auf die partielle Wiederherstellung der im Vakuum gebrochenen chiralen Symmetrie ergibt.
Die Coltrims-Methode hat sich seit den 1990er Jahren als gutes experimentelles Instrument in der Atomphysik und darüberhinaus etabliert. Sie beruht darauf, dass die bei einer Reaktion entstehenden Fragmente mit ortssensitiven Detektoren nachgewiesen werden. Die Signale der Detektoren wurden bisher mit einem analogen Vorverstärker verstärkt und dann mit Hilfe eines Constant Fraction Discriminators in digitale Signale umgewandelt. Die Zeitinformation der digitalen Signale wurden von Time to Digital Convertern aufgenommen und im Computer gespeichert. Mit dieser Form der Auslese und Analyse der von den Detektoren stammenden Signale können nur einige wenige Fragmente nachgewiesen werden. Die Lösung dieses Problems besteht also darin, eine neue Variante für die Auslese und Analyse der Signale zu finden. Diese wurde in der Verwendung eines Transientenrekorders gefunden. Anstatt nur die Zeitinformation zu speichern, nimmt dieser die gesamte Signalform der Detektoren auf. Die Aufgabe, die in dieser Arbeit bearbeitet werden sollte, bestand darin, eine Software zu entwickeln, mit deren Hilfe der Transientenrekorder gesteuert werden kann. Auch sollte ein Weg gefunden werden nur die für das Experiment notwendigen Informationen des aufgenommenen Zeitfensters zu speichern. Des Weiteren sollten Methoden aufgezeigt werden, wie die aufgenommen Signale untersucht und deren Parameter extrahiert werden können. Diese Methoden wurden dann an realen Signalen getestet. Nachdem im ersten Kapitel die Motivation zu dieser Arbeit und einige theoretische Hintergründe vorgestellt werden, wird im zweiten Kapitel auf verschiedene Methoden der Signalanalyse eingegangen. Der Augenmerk liegt dabei sowohl auf Einzel- sowie Doppelsignalanalyse. Die Güte der vorgestellten Algorithmen wird mit Hilfe von künstlichen Signalen ermittelt. Es zeigt sich, dass die beste Methode die zeitliche Position der Einzelsignale zu finden, der Pulsfit ist. Mit dieser Methode kann eine Auflösung von etwa 50 ps erzielt werden. Bei der Betrachtung der Doppelsignale stellt sich heraus, dass der minimale Abstand zwischen den Signalen 5 ns bis 7 ns betragen muss. Das dritte Kapitel zeigt eine Anwendung des neuen Aufnahmesystems. Dort werden die physikalischen Ergebnisse, die mit Hilfe des neuen Systems gewonnen werden konnten, mit einem herkömmlichen Aufnahmesystem verglichen. Aufgrund der geringeren Totzeit des neuen Aufnahmesystems konnte mehr Statistik gewonnen werden. Der dadurch gewonnene Vorteil zeigt sich deutlich in den Ergebnissen, bei denen eine vierfach Koinzidenz verlangt wird. Bei dem nächsten Kapitel beschriebenen Experiment mussten sehr viele Fragmente nachgewiesen werden. Hierzu wird ein weiteres Kriterium neben der Zeitsumme vorgestellt mit dem die Anodensignale einander zugewiesen werden können. Die in diesem Kapitel gezeigten physikalischen Ergebnisse zeigen die Impulsverteilungen für Neon und Helium für unterschiedliche Lichtintensitäten bzw. Ionisationsprozesse. Im darauf folgenden Kapitel wird beschrieben, wie die neue Aufnahmemethode dazu verwendet werden kann, die von den Detektoren kommenden Signale genauer zu analysieren. Die physikalische Reaktion führte dazu, dass von dem Detektor hauptsächlich Doppelsignale aufgenommen wurden. Dies erlaubt die Untersuchung der Doppelsignalalgorithmen an realen Signalen. Hierbei zeigte sich, dass die Totzeit bei realen Signalen vergleichbar mit der Totzeit bei künstlichen Signalen ist. Die Algorithmen können bei Abständen der Einzelsignale von weniger als 10 ns die Position der Signale nicht mehr genau bestimmen. Anhand der Pulshöhenverteilung kann gezeigt werden, dass der verwendete Detektor in der Mitte eine geringere Nachweiseffizienz hatte. Im letzten Kapitel wird die Güte der verschiedenen Methoden der Einzelsignalanalyse anhand von realen Signalen überprüft. Dabei wurden Signale desselben Detektors mit unterschiedlichen Vorverstärkern verstärkt. Die beiden Vorverstärker unterschieden sich in ihrer Bandbreitenbegrenzung. Die Daten wurden mit einem Transientenrekorder mit 2 GS aufgenommen. Es wird gezeigt wie diese Daten umgewandelt werden können, so dass sie einem System mit nur 1 GS entsprechen. Dies erlaubt es die Güte der Methoden für Signale eines Systems mit 2 GS mit denen eines Systems mit 1 GS zu vergleichen. Es zeigt sich in der Pulshöhenverteilung, dass die Signale des stärker bandbreitenbegrenzten Vorverstärkers vergleichbar mit den künstlichen Signalen sind. Die Signale des weniger stark bandbreitenbegrenzten Vorverstärkers weisen eine zu starke Abhängigkeit ihrer Breite von der Pulshöhe auf. Aus diesem Grund sind die Ergebnisse des letzt genannten Vorverstärkers abweichend von den Ergebnissen mit den künstlichen Signalen. Bei diesem Vorverstärker zeigte der einfache Constant Fraction Algorithmus die beste Auflösung.
Im Rahmen dieser Arbeit wurde untersucht, inwieweit eine Bewegungsschärzung aus monokularen Bildsequenzen von Straßenverkehrsszenen und eine darauf aufbauende Hinderniserkennung mit Hilfe von statistischen oder neuronalen Methoden realisiert werden kann. Bei dem zugrunde liegenden mathematischen Modell wird angenommen, daß die Umgebung, in der sich ein Fahrzeug bewegt, im wesentlichen eben ist, was für Verkehrsequenzen in guter Näherung erfüllt ist. Im ersten Teil dieser Arbeit wurde ein statistisches Verfahren zur Bewegungsschätzung vorgestellt und diskutiert. Der erste Schritt dieses Verfahrens stellt die Generierung eines sogenannten Markantheitsbildes dar, in welchem Objektkanten und Objektecken visuell hervorgehoben werden. Für die daraus resultierende Liste von markanten Bildbereichen werden anschließend unter Verwendung einer sogenannten Verschiebungsvektorschätzung, Korrespondenzen im zeitlich folgenden Bild ermittelt. Ausgehend von dem resultierenden Verschiebungsvektorfeld, werden in dem nächsten Schritt des Verfahrens die Bewegungsgrößen ermittelt, also die Rotationsmatrix und der Translationsvektor des Fahrzeugs, beziehungsweise der Kamera. Um abschließend eine Hinderniserkennung realisieren zu können, erfolgt unter Verwendung der Bewegungsgrößen eine Bewegungskompensation der Bilddaten. Bei einer solchen Bewegungskompensation wird unter Verwendung der ermittelten Bewegungsgrößen und dem Modell der bewegten Ebene eine Rücktransformation jedes Bildpixels durchgeführt, so daß bei der Bildung eines Differenzbildes zwischen dem bewegungskompensierten Bild und dem tatsächlich aufgenommenen Bild, dreidimensionale Strukturen, die ja das Ebenenmodell verletzen, deutlich hervortreten und somit auf potentielle Hindernisse hinweisen. Es hat sich gezeigt, daß Fehlmessungen in den Verschiebungsvektoren, welche beispielsweise durch periodische Strukturen auf der Ebene auftreten können, die Bewegungsschätzung und die Hinderniserkennung empfindlich stören. Diese statistischen Ausreißer bewirken, daß trotz der Verwendung von robusten Schätzmethoden, eine stabile Hinderniserkennung nur durch die Einbeziehung von Vorwissen über die Art der Bewegung des Fahrzeugs realisiert werden kann. Weiterhin führen die Komplexität des Verfahrens und die damit verbundenen hohen Anforderungen an die Rechenleistung der eingesetzten Hardware dazu, daß die für die praktische Anwendbarkeit so wichtige Echtzeitfähigkeit des Verfahrens bisher nur für Eingangsbilder mit geringer Auflösung ermöglicht werden konnte. Speziell für die Bildverarbeitung hat sich das neue Paradigma der Zellularen Neuronalen Netzwerke als außerordentlich leistungsfähig erwiesen. Neben der extrem hohen Verarbeitungsgeschwindigkeit von CNN-basierten schaltungstechnischen Realisierungen zeichnen sie sich durch eine hohe Robustheit bei vertauschten oder fehlerhaften Eingangsdaten aus. Für nahezu jedes aktuelle Problem der Bildverarbeitung wurde bisher ein geeignetes CNN bestimmt. Auch für komplexe Aufgabenstellungen aus der Bildverarbeitung, wie beispielsweise die Texturklassifikation, die Spurverfolgung oder die Gewinnung von Tiefeninformation konnten bereits CNN-Programme implementiert und schaltungstechnisch verwirklicht werden. So konnte auch im zweiten Teil dieser Arbeit gezeigt werden, daß die einzelnen Schritte der Hinderniserkennung aus monokularen Bildsequenzen ebenfalls unter Verwendung eines CNN realisierbar sind. Es wurde demonstriert, daß für die Generierung eines Markantheitsbildes bereits ein Standard-CNN mit linearer Kopplungsfunktion und der Nachbarschaft r=1 verwendet werden kann. Das rechenaufwändige statistische Verfahren der Markantheitsbildberechnung kann somit durch einen einzigen CNN-Verarbeitungsschritt durchgeführt werden. Weiterhin wurde im Rahmen dieser Arbeit gezeigt, daß auch der folgende, rechenintensive Schritt des statistischen Verfahrens der Hinderniserkennung, nämlich die Verschiebungsvektorschätzung, mittels CNN verwirklicht werden kann. Hierzu sind CNN mit polynomialen Kopplungsfunktionen und der Nachbarschaft r=1 notwendig. Bei den durchgeführten Untersuchungen hat sich herausgestellt, daß die CNN-basierten Verarbeitungsschritte den statistischen Methoden in den Punkten Robustheit und Verarbeitungsgeschwindigkeit deutlich überlegen sind. Abschließend wurde in dieser Arbeit gezeigt, daß mit Hilfe von CNN sogar eine direkte Hinderniserkennung aus monokularen Bildsequenzen - ohne den Umweg über die Bestimmung der Verschiebungsvektoren und der Bewegungsgrößen - realisiert werden kann. In dem vorgestellten Verfahren wird nach zwei Vorverarbeitungsschritten, die Hinderniserkennung in einem einzigen Schritt unter Verwendung eines CNN mit polynomialen Zellkopplungsgewichten vom Grade D=3 und der Nachbarschaft r=2 durchgeführt. Das vorgeschlagene Verfahren führt zu einer wesentlichen Vereinfachung der Hinderniserkennung in monokularen Bildsequenzen, da die Bewegegungsschätzung aus dem statistischen Verfahren nicht länger notwendig ist. Die Umgehung der expliziten Bewegungsschätzung hat weiterhin den Vorteil, daß der Rechenaufwand stark reduziert wurde und durch den Wegfall der Verschiebungsvektorschätzung und dem damit verketteten Problem der Ausreißer, ist das vorgestellte CNN-basierte Verfahren außerdem sehr robust. Die ersten Resultate, die unter Verwendung von synthetischen und natürlichen Bildsequenzen erhalten wurden, sind überaus vielversprechend und zeigen, daß CNN ausgezeichnet zur Verarbeitung von Videosequenzen geeignet sind.
Diese Arbeit befaßt sich mit der Untersuchung des Emissionsverhaltens der K+ Mesonen in Au + Au Stößen bei 1AGeV. Das Experiment wurde mit dem Kaonen-Spektrometer KaoS am Schwerionensynchrotron SIS der Gesellschaft für Schwerionenforschung GSI durchgeführt. In zahlreichen Untersuchungen relativistischer Schwerionenstöße wurde eine kollektive Bewegung der Nukleonen beobachtet, die als Fluß bezeichnet wird. In nichtzentralen Stößen wurde u. a. ein gerichteter Seitwärtsfluß der Nukleonen und Pionen in die Reaktionsebene und ein elliptischer Fluß senkrecht zur Reaktionsebene gefunden. Der Nukleonenfluß wird als hydrodynamischer Effekt aufgrund des Drucks in der Reaktionszone interpretiert, während der Fluß der Pionen als Folge der Endzustandswechselwirkung verstanden wird. In dieser Arbeit wurde die Untersuchung des Flußphänomens auf die positiv geladenen Kaonen erweitert. Die Kaonen, die ein seltsames Quark enthalten, stellen eine besonders geeignete Sonde der dichten Reaktionszone dar. Wegen der großen mittleren freien Wegläange sollten die Kaonen fast ungestört nach außen emittiert werden. Zur Untersuchung dieser Fragestellung wurden die spektralen Energieverteilungen und die azimutalen Winkelverteilungen studiert. Um diese in Abhängigkeit von der Zentralität der Schwerionenreaktion zu untersuchen, wurden Stoßparameter und Anzahl der partizipierenden Nukleonen experimentell bestimmt. Dazu wurden die mit dem Großwinkel-Hodoskop bestimmte Teilchenmultiplizität und die mit dem Kleinwinkel-Hodoskop bestimmte Ladungssumme der Projektilspektatoren benutzt. Der Nachweis der Projektilspektatoren mit dem Kleinwinkel-Hodoskop erlaubt ferner, für jedes Ereignis die Reaktionsebene einer Schwerionenreaktion zu bestimmen. Der Emissionswinkel der positiv geladenen Kaonen konnte dann in Bezug auf die Reaktionsebene untersucht werden. Die Energiespektren der Kaonen, die bei Theta CM ~ 90° und Theta QCM ~ 130° in zentralen Stößen gemessen wurden, haben einen Steigungsparameter (Temperatur) von etwa 87MeV. Die transversalen kinetischen Energiespektren bei vier verschiedenen Rapiditätsintervallen in zentralen Stößen haben einen Steigungsparameter von etwa 90MeV und keine Abweichung von einem thermischen Verhalten innerhalb der Meßgenauigkeit. Die Ausbeuten sind dagegen unterschiedlich. Bei R¨uckw ¨ artswinkel bzw. bei Targetrapidität wurde ein fast doppelt so großer Wirkungsquerschnitt wie bei Schwerpunktrapidität gemessen. Die polare Winkelverteilung der positiv geladenen Kaonen ist also nicht isotrop. In dieser Arbeit konnte zum ersten Mal der elliptische Fluß der positiv geladenen Kaonen nachgewiesen werden: K+ Mesonen werden bevorzugt senkrecht zur Reaktionsebene emittiert. Die azimutale Anisotropie ist am stärksten für periphere und semi-zentrale Stöße und im Bereich der Schwerpunktrapidität. Im Gegensatz zu den Pionen zeigt die Stärke der Anisotropie keine Abhängigkeit vom Transversalimpuls. Während im Falle der Pionen die azimutale Anisotropie auf die Abschattung durch die Spektatoren zurückgeführt wird, kann dieser Effekt die Kaonendaten nicht erklären, da die K+ Mesonen eine große mittlere freie Weglänge in Kernmaterie besitzen. Mikroskopische Transportmodellrechnungen wie RBUU und QMD können den elliptischen Fluß der Kaonen nur unter Berücksichtigung des Kaon-Nukleon-Potentials im nuklearen Medium wiedergeben [Li97, Wan98a]. Als ein anderer experimenteller Hinweis auf das KN-Potential im Medium wurde das Verschwinden des gerichteten Seitwärtsflusses der Kaonen vorhergesagt [Li95a]. Die Analyse der experimentellen Daten in einem Rapiditätsintervall von y/yStrahl = 0:2 ~ 0:8 zeigt keine in die Reaktionsebene gerichtete Flußkomponente.
The Kaon-Spectrometer (KaoS) at the heavy-ion synchrotron (SIS) at the Gesellschaft für Schwerionenforschung (GSI) in Darmstadt has been used to study production and propagation of K+ and K- mesons from Au+Au collisions at a kinetic beam energy of 1.5 AGeV. This energy for K+ mesons is close to the corresponding production threshold in binary nucleon-nucleon collisions and far below for K- mesons. The azimuthal angular distributions of particles as a function of the collision centrality and particle transverse momenta have been measured. The properties of strange mesons are expected to be modified by the in-medium meson-baryon potential. Theoretical calculations show that the superposition of the scalar and vector potentials leads to a small repulsive K+N and a strong attractive K-N potential. Additionally, the interaction of kaons and antikaons with nuclear matter is different. The strangeness conservation law inhibits the absorption probability of K+ mesons as they contain an s-quark. K- mesons, however, interact with nucleons via strangenessexchange (K- + N ->Y + pion, where Y = lambda, sigma). Moreover, the reverse process (pion + Y -> K- + N) is the dominant production mechanism of K- mesons at SIS energies. The azimuthal angular emission patterns of kaons are expected to be sensitive to the in-medium potentials. An enhanced out-of-plane emission of K+ mesons was observed in Au+Au reactions at 1.0 AGeV and 1.5 AGeV, and also in Ni+Ni at 1.93 AGeV. The out-of-plane emission of K+ mesons in Au+Au reactions at 1.0 AGeV was interpreted as a consequence of a repulsive K+N potential in the nuclear medium, however, recent transport calculations show that the emission patterns obtained in Au+Au at 1.5 AGeV and Ni+Ni at 1.93 AGeV are additionally influenced by the re-scattering of kaons. For K- mesons the calculations predict an almost isotropic emission pattern due to the attractive K-N potential which counteracts the absorption of K- mesons in the spectator fragments. In Ni+Ni collisions at 1.93 AGeV the azimuthal distribution of K- mesons has been found to be isotropic. In this case, however, the spectators are rather small and have large relative velocities. In addition, the delay of antikaon emission due to strangenessexchange reaction minimizes the interaction with the spectators. As a consequence the sensitivity of the K- meson emission pattern to the K-N in-medium potential is reduced. In Au+Au collisions we found a dependence of the K- meson azimuthal emission pattern on the transverse momentum. The antikaons registered with pt < 0.5 GeV/c are preferentially emitted in the reaction plane and the particles with pt > 0.5 GeV/c show strong out-of-plane enhancement. The emission patterns of K- can be explained in terms of two competing phenomena: one of them is indeed the influence of the attractive K-N potential, however, the second one originates from the strangeness-exchange process.
Nuclear matter, that takes the form of protons and neutrons under normal conditions, is subject to a phase transition at high temperatures and densities, liberating the quarks and gluons that are usually confined in nucleons and creating a medium of free partons: the Quark-Gluon-Plasma. It is generally believed that this state of matter can be created in relativistic collisions of heavy nuclei. The study of the medium created in these collisions is the subject of heavy-ion physics. One topic within this field are particles with high transverse momentum, that are created in initial hard collisions between partons of the incoming nuclei. The energetic partons lose energy due to interactions with the medium before they fragment into a jet of hadrons. Due to momentum conservation, these jets are usually created as back-to-back pairs, or less commonly as three-jet or photon-jet events, where a single jet is balanced by a hard photon. The energy loss can be measured using correlations between particles with high transverse momenta. A trigger particle is selected with very high transversemomentum and the distribution of the azimuthal angle of associated particles in the same event is studied, relative to the azimuth of the trigger particle.These azimuthal correlations show a peak for opening angles around 0 from particles selected from the same jet, and a second peak at opening angles around 180 degrees from back-to-back di-jets. Random combinations with the underlying event generate a flat background, extending over the full range of opening angles. The STAR experiment observed a modification of these correlations in central Au+Au collisions, where trigger particles with 4GeV < pT(trigger) < 6GeV and associated particles with 2GeV < pT(trigger) < 4GeV were selected. A strong suppression has been observed for away-side correlations in central Au+Au collisions, relative to p+p, d+Au and peripheral Au+Au data. This can be explained by assuming two partons going in opposite directions, where at least one has to travel a large distance through the medium, causing energy loss and effectively removing the event from the analysis. For near-side correlations, no significant modification has been observed, which can be explained by surface emission, assuming that the observed jets have travelled only a short distance in themedium, not leaving enough time for interactions with the medium. Both trigger- and associated particles in a correlation analysis with charged hadrons are subject to modifications due to the medium. This can be avoided by using photon-jet events instead of di-jets, because the photon does not interact with the medium and therefore provides the best available measure of the properties of the opposite jet in the presence of the underlying event. This thesis studies azimuthal correlations between regions of high energy deposition in the electro-magnetic calorimeter as trigger- and charged tracks as associated particles. The data sample had been enriched by online event selection, allowing for the selection of trigger particles with a transverse energy of more than 10GeV and associated particles with more than 2,3 or 4 GeV. The away-side yield per trigger particle is strongly suppressed like in correlations between charged particles. The near-side yield is also reduced by about a factor two, clearly different from charged correlations. The trigger particles are a mixture of photon pairs from the decays of neutral pions and single photons, mainly from photon-jet events, with small contributions from other hadron decays and fragmentation photons. Pythia simulations predict a ratio of neutral pions to prompt photons of 3.5:1 in p+p collisions with the same cuts as in the presented analysis. Single particle suppression further reduces this ratio in central Au_Au collisions, down to about 0.8:1, indicating that the majority of trigger particles in central Au+Au collisions are prompt photons. The increasing fraction of prompt photon triggers without an accompanying jet and therefore zero associated yield reduces the average yield per trigger particle. The magnitude of the observed effect agrees well with the expectation from Pythia simulations and the assumption of a single particle suppression by a factor 4-5. An analysis of away-side correlations is more difficult, because both photon-jet and di-jet events contribute. The aim is the separation of these two contributions. As a clear separation is not possible with the available dataset, a comparison with two different scenarios is given, where a surprisingly small suppression by only a factor of about 5 is favoured for both dijet- and photon-jet-correlations. A separate measurement of both contributions will be possible by a shower-shape analysis with the EM calorimeter or a comparison with charged correlations in the same kinematic region.
Strong chromofields developed at early stages of relativistic heavy-ion collisions give rise to the collective deceleration of net baryons from colliding nuclei. We have solved classical equations of motion for baryonic slabs under the action of time-dependent chromofield. We have studied sensitivity of the slab trajectories and their final rapidities to the initial strength and decay pattern of the chromofield as well as to the back reaction of produced plasma. This mechanism can naturally explain significant baryon stopping observed at RHIC, an average rapidity loss hδyi ≈ 2. Using a Bjorken hydrodynamical model with particle producing source we also study the evolution of partonic plasma produced as the result of chromofield decay. Due to the delayed formation and expansion of plasma its maximum energy density is much lower than the initial energy density of the chromofield. It is shown that the net-baryon and produced parton distributions are strongly correlated in the rapidity space. The shape of net-baryon spectra in midrapidity region found in the BRAHMS experiment cannot be reproduced by only one value of chromofield energy density parameter ǫ0, even if one takes into account novel mechanisms as fluctuations of color charges generated on the slab surface, and weak interaction of baryon-rich matter with produced plasma. The further step to improve our results is to take into account rapidity dependence of saturation momentum as explained in thesis. Different values of parameter ǫ0 has been tried for different variants of chromofield decay to fit BRAHMS data for net-baryon rapidity distribution. In accordance with our analysis, data for fragmentation region correspond to the lower chromofield energy densities than mid-rapidity region. χ2 analysis favors power-law of chromofield decay with corresponding initial chromofield energy density of order ǫf = 30GeV/fm3.
This dissertation describes the development of the beam dynamics design of a novel superconducting linear accelerator. At a main operating frequency of 216.816 MHz, ions with a mass-to-charge ratio of up to 6 can be accelerated at high duty cycles up to CW operation. Intended for construction at the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, the focus of the work is on the beam dynamic design of the accelerator section downstream of the high charge injector (HLI) at an injection energy of 1.39 MeV/u. An essential feature of this linear accelerator (Linac) is the use of the EQUUS (Equidistant Multigap Structure) beam dynamics concept for a variably adjustable output energy between 3.5 and 7.3 MeV/u (corresponding to about 12.4 % of the speed of light) with a required low energy spread of maximum 3 keV/u.
The GSI Helmholtz Centre for Heavy Ion Research is a large-scale research facility that uses its particle accelerators to perform basic research with ion beams. Research on super-heavy elements ("SHE") is a major focus. It is expected that their production and research will provide answers to a large number of scientific questions. The production and detection of elements with atomic numbers 107 to 112 (Bohrium, Hassium, Meitnerium, Darmstadtium, Röntgenium and Copernicium) was first achieved at GSI between 1981 and 1996.
Key to this remarkable progress in SHE research were continuous developments and technical innovations. On the one hand, in the field of experimental sensitivity and detection of the nuclear reaction products and, on the other hand, in the field of accelerator technology.
For the acceleration of the projectile beam, the UNILAC (Universal Linear Accelerator), which was put into operation in 1975, has been used at GSI so far. In the course of the reconstruction and expansion of the research infrastructure at GSI, a dedicated new particle accelerator, HELIAC (Helmholtz Linear Accelerator), is now under development to meet the special requirements of the beam parameters for the synthesis of new superheavy elements. Typically, the production rates of super-heavy elements with effective cross sections in the picobarn range are very low. Therefore, a high duty cycle (up to CW operation) is a key feature of HELIAC. Thus, the required beam time for the desired nuclear reactions can be significantly shortened.
Theoretical preliminary work by Minaev et al. and newly created knowledge about design, fabrication, and operation of superconducting drift tube cavities have laid the foundation for this work and thus the development of the HELIAC linear accelerator. It consists of a superconducting and a normal conducting part. Acceleration takes place in the superconducting part in four cryomodules, each about 5 m long. These contain three CH cavities, one buncher cavity, two solenoid magnets for transverse beam focusing, and two beam position monitors (BPMs).
The following 10 m long normal conducting part is primarily used for beam transport and ends with a buncher cavity. This is operated at a halved frequency of 108.408 MHz.
A key feature of this accelerator is the variability of the output energy from 3.5 to 7.3 MeV/u with a small energy uncertainty of ±3 keV/u maximum over the entire output energy range. For the development of HELIAC, the EQUUS beam dynamics concept used combined the advantages of conventional linac designs with the high acceleration gradients of superconducting CH-DTLs. By doubling the frequency (compared to the GSI high charge injector) to 216.816 MHz in the superconducting section and using CH cavities at an acceleration gradient of maximum 7.1 MV/m, an acceleration efficiency with superconducting drift tube structures that is unique in the world is made possible. At the same time, the compact lengths of the CH cavities ensure good handling for both production and operation. EQUUS leads to longitudinal beam stability in all energy ranges of the accelerator with the sliding motion of the synchronous phase within each CH cavity. The rms emittance growth is moderate in all levels. The modular design of the HELIAC with four cryomodules basically allows the Linac to be commissioned starting with the first cryomodule, the so-called Advanced Demonstrator. In the subsequent expansion stage with only the first two cryomodules of HELIAC, the lower limit of the energy range to be provided by HELIAC (3.5 MeV/u) can already be clearly exceeded, so that use in regular beam operation at GSI is already conceivable from here on.
By means of error tolerance studies, the stability of the HELIAC beam dynamics design against possible alignment errors of the magnetic focusing elements and accelerator cavities as well as errors of the electric field amplitudes and phases have been investigated, basically confirmed and critical parameters have been determined. An additional steering concept via dipole correction coils at the solenoid magnets allows transverse beam control as well as diagnostics by means of two BPMs per cryomodule.
With completion of this work in 2021, the CH1 and CH2 cavities have already been built and are in the final preparation and cold test phase. In parallel, the development of the CH cavities CH3-11 has also been started.
Die vorliegende Dissertation stellt die Strahldynamikdesigns zweier Hochfrequenzquadrupol-Linearbeschleuniger bzw. Radio Frequency Quadrupoles (RFQs) vor: das fur den RFQ des Protonen-Linearbeschleunigers (p-Linac) des FAIR2-Projekts an der GSI3 Darmstadt sowie einen ersten Designentwurf für einen kompakten RFQ, der u.a. zur Erzeugung von Radioisotopen für medizinische Zwecke genutzt werden könnte. Der Schwerpunkt liegt auf dem ersten Design.
This thesis discusses important questions of the beam dynamics in the proton-lead operation in the Large Hadron Collider (LHC) at CERN in Geneva. In two time blocks of several weeks in the years 2013 and 2016, proton-lead collisions have so far been successfully generated in the LHC and used by the experiments at the LHC. One reason for doubts regarding the successful operation in proton-lead configuration was the fact that the beams have to be accelerated with different revolution frequencies. There is long-range repulsion between the beams, since both beams share the beam chamber around the interaction points. Because of the different revolution frequencies, the positions of the interaction between the beams shift each revolution. This can lead to resonant excitation and to an increase in the transverse beam emittance, as was observed in the Relativistic Heavy-Ion Collider (RHIC). In this thesis, simulations for the LHC, RHIC and the High-Luminosity Large Hadron Collider (HL-LHC) are performed with a new model. The results for RHIC show relative growth rates of the emittances of the gold beam in gold-deuteron operation in RHIC from 0.1 %/s to 1.5 %/s. Growth rates of this magnitude were observed experimentally in RHIC. Simulations for the LHC show no significant increase of the emittance of the lead beam for different intensities of the counter-rotating beam. The simulation results confirm the measured stability of the beams in the LHC and the issue of strongly increasing emittances in RHIC is reproduced. Also, no significant increase of the emittance is predicted for the Future Circular Collider (FCC) and the HL-LHC.
Using a frequency-map analysis, this work verifies whether the interaction of the lead beam with the much smaller proton beam in the proton-lead operation of the LHC leads to diffusion within the lead beam. Experiences at HERA at DESY in Hamburg and at SppS at CERN have shown that the lifetime of the larger beam can rapidly decrease under certain circumstances. The results of the simulation show no chaotic dynamics near the beam centre of the lead beam. This result is supported by experimental observation.
A program code has been developed which calculates the beam evolution in the LHC by means of coupled differential equations. This study shows that the growth rates of the lead beam due to intra-beam scattering is overestimated and that particle bunches of the lead beam lose more intensity than assumed in the model. The analysis also shows that bunches colliding in a detector suffer additional losses that increase with decreasing crossing angle at the interaction point.
In this work, 2016 data from beam-loss monitors in combination with the luminosity and the loss rate of the beam intensity are used to determine the cross section of proton-lead collisions at the center-of-mass energy of 8.16 TeV. Beam-loss monitors that mainly detect beam losses that are not caused by the collision process itself are used to determine the total cross section via regression. An analysis of the data recorded in 2016 at the center-of-mass energy of 8.16 TeV resulted in a total cross section of σ=(2.32±0.01(stat.)±0.20(sys.)) b. This corresponds approximately to a hadronic cross section of σ(had)=(2.24±0.01(stat.)±0.21(sys.)) b. This value deviates only by 5.7 % from the theoretical value σ(had)=(2.12±0.01) b.
The simulation code for determining the beam evolution is also used to estimate the integrated luminosity of a future one-month run with proton-lead collisions. The result of the study shows that in the future the luminosity in the ATLAS and CMS experiments will increase from 15/nb per day in 2016 to 30/nb per day, which is a significant increase in terms of the performance. This operation, however, requires the use of the TCL collimators to protect the dispersion suppressors at ATLAS and CMS from collision fragments.
This work also gives an outlook on the expected luminosity production in proton-nucleus operation using ion species lighter than lead ions. For example, a change from proton-lead to proton-argon collisions would increase the integrated luminosity from monthly 0.8/nb to 9.4/nb in ATLAS and CMS. This is an increase of one order of magnitude and approximately a doubling of the integrated nucleon-nucleon luminosity. There may be a test operation with proton-oxygen collisions in 2023, which will last only a few days and will be operated with a low luminosity. The LHCf experiment (LHCb experiment) would achieve the desired integrated luminosity of 1.5/nb (2/nb) within 70h (35h) beam time.
At sufficiently high temperatures and baryon densities, nuclear matter is expected to undergo a transition into the Quark-Gluon-Plasma (QGP) consisting of deconfined quarks and gluons and accompanied by chiral symmetry restoration. Signals of these two fundamental characteristics of Quantum-Chromo-Dynamics (QCD) can be studied in ultra-relativistic heavy-ion collisions producing a relatively large volume of high energy and nucleon densities as existent in the early universe. Dileptons are unique bulk-penetrating sources for this purpose since they penetrate through the surrounding medium with negligible interaction and are created throughout the entire evolution of the initially created fireball. A multitude of experiments at SIS18, SPS and RHIC have taken on the challenging task to measure these rare probes in a heavy-ion environment. NA60's results from high-quality dimuon measurements have identified the broadened ρ spectral function as favorable scenario to explain the low-mass dilepton excess, and partonic sources as dominant at intermediate dilepton masses.
Enabled by the addition of a TOF detector system in 2010, the first phase of the Beam Energy Scan (BES-I) at RHIC allows STAR to conduct an unprecedented energy-dependent study of dielectron production within a homogeneous experimental environment, and hence close the wide gap in the QCD phase diagram between SPS and top RHIC energies. This thesis concentrates on the understanding of the LMR enhancement regarding its invariant mass, transverse momentum and energy dependence. It studies dielectron production in Au+Au collisions at beam energies of 19.6, 27, 39, and 62.4 GeV with sufficient statistics. In conjunction with the published STAR results at top RHIC energy, this thesis presents results on the first comprehensive energy-dependent study of dielectron production.
This includes invariant mass- and transverse momenta-spectra for the four beam energies measured in 0-80% minimum-bias Au+Au collisions with high statistics up to 3.5 GeV/c² and 2.2 GeV/c, respectively. Their comparison with cocktail simulations of hadronic sources reveals a sizeable and steadily increasing excess yield in the LMR at all beam energies. The scenario of broadened in-medium ρ spectral functions proves to not only serve well as dominating underlying source but also to be universal in nature since it quantitatively and qualitatively explains the LMR enhancements measured over the wide range from SPS to top RHIC energies. It shows that most of the enhancement is governed by interactions of the ρ meson with thermal resonance excitations in the late(r)-stage hot and dense hadronic phase. This conclusion is supported by the energy-dependent measurement of integrated LMR excess yields and enhancement factors. The former do not exhibit a strong dependence on beam energy as expected from the approximately constant total baryon density above 20 GeV, and the latter show agreement with the CERES measurement at SPS energy. The consistency in excess yields and agreement with model calculations over the wide RHIC energy regime makes a strong case for LMR enhancements on the order of a factor 2-3.
The extent of the results presented here enables a more solid discussion of its relation to chiral symmetry restoration from a theoretical point of view. High-statistics measurements at BES-II hold the promise to confirm these conclusions along with the LMR enhancment's relation to total baryon density with decreasing beam energy.
This thesis has two main parts.
The first part is based on our publication [1], where we use perturbation theory to calculate decay rates of magnons in the Kitaev-Heisenberg-Γ (KHΓ) model. This model describes the magnetic properties of the material α-RuCl 3 , which is a candidate for a Kitaev spin liquid. Our motivation is to validate a previous calculation from Ref. [2]. In this thesis, we map out the classical phase diagram of the KHΓ model. We use the Holstein-Primakoff
transformation and the 1/S expansion to describe the low temperature dynamics of the Kitaev-Heisenberg-Γ model in the experimentally relevant zigzag phase by spin waves. By parametrizing the spin waves in terms of hermitian fields, we find a special parameter region within the KHΓ model where the analytical expressions simplify. This enables us to construct the Bogoliubov transformation analytically. For a representative point in the special parameter region, we use these results to numerically calculate the magnon damping, which is to leading order caused by the decay of single magnons into two. We also calculate the dynamical structure factor of the magnons.
The second part of this thesis is based on our publication [3], where we use the functional renormalization group to analyze a discontinuous quantum phase transition towards a non-Fermi liquid phase in the Sachdev-Ye-Kitaev (SYK) model. In this thesis, we perform a disorder average over the random interactions in the SYK model. We argue that in the thermodynamic limit, the average renormalization group (RG) flow of the SYK model is identical to the RG flow of an effective disorder averaged model. Using the functional RG, we find a fixed point describing the discontinuous phase transition to the non-Fermi liquid phase at zero temperature. Surprisingly, we find a finite anomalous dimension of the fermions, which indicates critical fluctuations and is unusual for a discontinuous transition. We also determine the RG flow at zero temperature, and relate it to the phase diagram known from the literature.
Breitbandige Beamforming-Algorithmen zur Erfassung von Audiosignalen mit kompakten Mikrofon-Arrays
(2009)
Mikrofon-Arrays erlauben die selektive Erfassung und Trennung von Audiosignalen aus einer akustischen Umgebung. Typische Anwendungen sind z.B. die Ortung einzelner Schallquellen, die räumliche Kartierung eines Schallfeldes ("akustische Kamera") oder der gerichtete Empfang einer bestimmten Schallquelle bei gleichzeitiger Unterdrückung von Umgebungs- oder Störschallen. Vielkanalige Verfahren und Filter, die sich dieser Aufgabe widmen, werden als Beamforming bzw. Beamformer bezeichnet. In dieser Dissertation werden bekannte und eigene Beamforming-Ansätze im Hinblick auf ihre Eignung für die hochwertige Übertragung von Audiosignalen untersucht. Diese erfordert neben einer möglichst großen Abdeckung des relevanten Frequenzbereichs (Breitbandigkeit) auch die Frequenzunabhängigkeit der Richtcharakteristik, um spektrale Verzerrungen zu vermeiden. Es wird ein Algorithmus vorgestellt, der diese Anforderungen mit sehr kompakten Arrays erfüllt. Eine klassische Möglichkeit, eine frequenzinvariante Charakteristik (Beampattern) mithilfe eines Delay-and-Sum-Beamformers zu erhalten, ist eine frequenzabhängige Gewichtung der Mikrofone, welche die effektive Apertur des Arrays proportional zur Schallwellenlänge einstellt. Diese Methode funktioniert jedoch nur bei Wellenlängen, die kleiner sind als die Ausdehnung des Arrays, und erfordert bei Frequenzen unter 100Hz Arrays von mehreren Metern Größe. Ein gänzlich anderes Verhalten zeigen differentielle Mikrofonarrays, welche Differenzen aus Signalen benachbarter Mikrofone bilden: In Kombination mit Integratorfiltern erzeugen sie Beampattern, die auch bei sehr kleinen Frequenzen, d.h. bei Wellenlängen, die groß gegen das Array sind, unverändert bleiben (sog. Superdirektivität). Aus diesem Prinzip wurde in dieser Arbeit das Konzept des Multipol-Beamformers entwickelt, der ein gegebenes Soll-Beampattern durch eine Reihenentwicklung nach Sinus- und Kosinusfunktionen (zweidimensionaler Fall) oder Kugelflächenfunktionen (dreidimensionaler Fall) approximiert. Der Multipol-Beamformer erzielt eine hervorragende Richtwirkung bei kleinen Frequenzen, ist jedoch nur über einen sehr begrenzten Bereich frequenzinvariant und erweist sich insbesondere in drei Raumdimensionen als analytisch aufwändig. Flexibler und in zwei wie in drei Raumdimensionen gleichermaßen einfach in der Formulierung ist demgegenüber das in der Literatur zu findende Verfahren des modalen Subraum-Beamformings (Modal Subspace Decomposition, MSD). Dieser Ansatz bestimmt zu einer beliebigen Sensorgeometrie einen Satz orthogonaler Eigen-Beampattern, die dann zu einer Reihenentwicklung des Soll-Beampatterns herangezogen werden. Ähnlich dem erwähnten Delay-and-Sum-Beamformer jedoch erfordert auch dieser Ansatz bei großen Wellenlängen entsprechend groß dimensionierte Arrays und ist nicht superdirektiv. In dieser Arbeit wurde deshalb eine eigene, neue Ausprägung des MSD-Algorithmus formuliert, welche die Superdirektivität des Multipol-Beamformers mit der Flexibilität und Einfachheit des MSD-Verfahrens vereint. Diese als "superdirektives MSD-Beamforming" bezeichnete Methode besitzt - wie das bereits bekannte MSD-Verfahren auch - die interessante Eigenschaft, daß die Eigen-Beampattern für ein frei zu wählendes Entwurfs-Frequenzband berechnet werden, so daß das Verhalten des Beamformers über ein ganzes Frequenzintervall kontrolliert werden kann. Dies eröffnet auch die Möglichkeit eines sehr breitbandigen Beamformings durch Kombination mehrerer Beamformer, die individuell auf benachbarte Frequenzbänder abgestimmt werden. Mit beispielsweise einem hexagonalen Array von nur 6cm Durchmesser und sieben Mikrofonen erreicht der superdirektive Ansatz so ca. 20-30dB Störabstand über einen Frequenzbereich von 100Hz bis 6kHz, was für Sprache eine sehr hohe Übertragungsqualität darstellt. Zur experimentellen Verifikation der untersuchten Algorithmen wurde im Rahmen dieser Arbeit eine vielkanalige Echtzeit-Signalverarbeitungsumgebung unter Windows XP erstellt, welche die Erfassung, Verarbeitung, Analyse und Ausgabe vielkanaliger Audio-Daten erlaubt. Auch eine Simulation idealer Freifeldmessungen an Mikrofonarrays ist damit möglich, indem die Ausbreitung des Schalls von der Schallquelle zu den Mikrofonen durch zeitdiskrete Fractional-Delay-Filter simuliert wird. Dieser Filtertypus wurden im Rahmen dieser Arbeit ebenfalls eingehend untersucht: Für zwei aus der Literatur bekannte Entwurfsverfahren wurden Erweiterungen gefunden, die bei gleicher Filterordnung eine höhere nutzbare Bandbreite erzielen. Für Messungen an realen Arrays wurde die Akustik-Messkammer des Instituts durch zusätzliche Dämmauskleidung für Freifeld-Messungen nutzbar gemacht. Die Messergebnisse belegen, daß die untersuchten Algorithmen in der Praxis erwartungsgemäß funktionieren und daß der gefundene superdirektive MSD-Algorithmus mit sehr kompakten Arrays eine gute breitbandige Erfassung und Trennung von Audiosignalen ermöglicht.
Results were presented from Brownian dynamics simulations for cyt c molecules approximated as spherical particles with diameter 2R ' 3.3 nm interacting with a charged planar membrane surface. Using the well-known Ermak-McCammon algorithm of ref. [36, 37] for solving the Langevin equations (see Chapter 2), a new computer program in C++ was developed. An overview of the way it is implemented is given in Chapter 3. The program in its current state is able to compute the trajectories (translation and rotation) of hundreds of spherical particles in systems with typical dimensions of 103 − 1003 nm3 . As explained in the introductory Chapter 1 the motivation for studying the dynamics of cyt c molecules in such systems came from the progress in the research of photosynthetic bacteria, e.g. While the internal processes of energy transduction (light harvesting, channelling to RC, charge separation) are quite well understood, the dynamics of soluble cyt c as an electron transporter in this context is not yet clear. In many textbooks one can find illustrations where a single cyt c is responsible for the electron transport between two integral membrane proteins (the reaction centre RC and the bc1 complex). But as pointed out in publications like refs. [49], [59], [60], [61] or [62] biological cells are crowded with different molecules. Consequently, one can assume that the electron transport between two integral membrane proteins is not simply taken on by one single cyt c molecule. Instead it is likely that many of these particles are located in a cyt c pool above the membrane and that they perform the electron transport in turns. Thus, it is desirable to have a simulation package that is able to compute the trajectories of many proteins. Note that the detailed processes of electron transfer and binding to membrane proteins are not modelled here. The details of these processes are quite complicated so that we refrained from including them in the coarse-grained simulations. Here, the actual binding is simply defined by a particle distance zb from the membrane which marks the beginning of the attractive potential. ...
The bulk viscosity of several quark matter phases is calculated. It is found that the effect of color superconductivity is not trivial, it may suppress, or enhance the bulk viscosity depending on the critical temperature and the temperature at which the bulk viscosity is calculated. Also, is it found that the effect of neutrino-emitting Urca processes cannot be neglected in the consideration of the bulk viscosity of strange quark matter. The results for the bulk viscosity of strange quark matter are used to calculate the r-mode instability window of quark stars with several possible phases. It is shown that each possible phase has a different structure for the r-mode instability window.
This Ph. D. thesis with the title "Characterisation of laser-driven radiation beams: Gamma-ray dosimetry and Monte Carlo simulations of optimised target geometry for record-breaking efficiency of MeV gamma-sources" is dedicated to the study of the acceleration of electrons by intense sub-picosecond laser pulses propagating in a sub-millimeter plasma with near-critical electron density (NCD) and resulting generation of the gamma bremsstrahlung and positrons in the targets of different materials and thickness.
Laser-driven particle acceleration is an area of increasing scientific interest since the recent development of short pulse, high-intensity laser systems. The interaction of intense high-energy, short-pulse lasers with solid targets leads to the production of high-energy electrons in the relativistic laser intensity regime of more than 1018 W /cm2. These electrons play the leading role in the first stage of the interaction of laser with matter, which leads to the creation of laser sources of particles and radiation. Therefore, the optimisation of the electron beam parameters in the direction of increasing the effective temperature and beam charge, together with a slight divergence, plays a decisive role, especially for further detection and characterisation of laser-driven photon and positron beams.
In the context of this work, experiments were carried out at the PHELIX laser system (Petawatt High-Energy Laser for Heavy Ion eXperiments) at GSI Helmholtz Center for Heavy-Ion Research GmbH in Darmstadt, Germany. This thesis presents a thermoluminescence dosimetry (TLD) based method for the measurement of bremsstrahlung spectra in the energy range from 30 keV to 100 MeV. The results of the TLD measurements reinforced the observed tendency towards the strong increase of the mean electron energy and number of super-ponderomotive electrons. In the case of laser interaction with long-scale NCD-plasmas, the dose caused by the gamma-radiation measured in the direction of the laser pulse propagation showed a 1000-fold increase compared to the high contrast shots onto plane foils and doses measured perpendicular to the laser propagation direction for all used combinations of targets and laser parameters.
In this thesis I present novel characterisation method using a combination of TLD measurements and Monte Carlo FLUKA simulations applicable to laser-driven beams. The thermoluminescence detector-based spectrometry method for simultaneous detection of electrons and photons from relativistic laser-induced plasmas initially developed by Behrens et al. (Behrens et al., 2003) and further applied in experiments at PHELIX laser (Horst et al., 2015) delivered good spectral information from keV energies up to some MeV, but as it was presented in (Horst et al., 2015) this method was not really suitable to resolve the content of photon spectra above 10 MeV because of the dominant presence of electrons. Therefore, I created new evaluation method of the incident electron spectra from the readings of TLDs. For this purpose, by means of MatLab programming language an unfolding algorithm was written. It was based on a sequential enumeration of matching data series of the dose values measured by the dosimeters and calculated with of FLUKA-simulations. The significant advantage of this method is the ability to obtain the spectrum of incident electrons in the low energy range from 1 keV, which is very difficult to measure reliably using traditional electron spectrometers.
The results of the evaluation of the effective temperature of super-ponderomotive electrons retrieved from the measured TLD-doses by means of the Monte-Carlo simulations demonstrated, that application of low density polymer foam layers irradiated by the relativistic sub-ps laser pulse provided a strong increase of the electron effective temperature from 1.5 - 2 MeV in the case of the relativistic laser interaction with a metallic foil up to 13 MeV for the laser shots onto the pre-ionized foam and more than 10 times higher charge carried by relativistic electrons.
The progressive simulation method of whole electron spectra described with two -temperatures Maxwellian distribution function has been developed and the results of dose simulations were compared with the acquired experimental data. The advanced feature of this method, which distinguishes it from the results of the simulation of the photon spectrum using the interaction with the target of mono-energetic electron beams (Nilgün Demir, 2013; Nilgün Demir, 2019) or the initial electron spectrum expressed as a function of one electron temperature (Fiorini, 2012), is the ability to simulate the initial electron spectrum described by the Maxwellian distribution function with two temperatures.
The important objective of this thesis was dedicated to the study and characterisation of laser-driven photon beams. In addition to this, the positron beams were evaluated. The investigation of bremsstrahlung photons and positrons spectra from high Z targets by varying the target thickness from 10 µm to 4 mm in simulated models of the interactions of electron spectra with Maxwellian distribution functions allowed to define an optimal thickness when the fluences of photons and positrons are maximal. Furthermore based on the results of FLUKA simulations the gold material was found to be the most suitable for the future experiments as e − γ target because of its highest bremsstrahlung yield.
Additionally Monte Carlo simulations were performed applying the obtained electron beam parameters from the electron acceleration process in laser-plasma interactions simulated with particle-in-cell (PIC) code for two laser energies of 20 J and 200 J. The corresponding electron spectra were imported into a Monte Carlo code FLUKA to simulate the production process of bremsstrahlung photons and positrons in Au converter. FLUKA simulations showed the record conversion of efficiency in MeV gammas can reach 10%, which reinforces the generation of positrons. The obtained results demonstrate the advantages of long-scale plasmas of near critical density (NCD) to increase the parameters of MeV particles and photon beams generated in relativistic laser-plasma interaction. The efficiency of the laser-driven generation of MeV electrons and photons by application of low-density polymer foams is essentially enhanced.
Die vorliegende Arbeit beschäftigt sich mit der Charakterisierung des ALTRO Chips (ALICE TPC Readout), der ein integraler und wichtiger Bestandteil der Auslesekette des TPC (Time Projection Chamber) Detektors von ALICE (A Large Ion Collider Experiment) ist. ALICE ist ein Experiment am noch im Bau befindlichen LHC (Large Hadron Collider) am CERN mit der zentralen Ausrichtung, Schwerionenkollisionen zu untersuchen. Diese sind von besonderem Interesse, da durch sie ein experimenteller Zugriff zu dem QGP (Quark Gluon Plasma) existiert, dem einzigen vom Standardmodell vorhergesagten Phasenübergang, der unter Laborbedingungen erreichbar ist. Im Jahr 2004 wurden Messungen an einem Teststrahl am CERN PS (Proton Synchrotron) durchgeführt. Der Prototyp wurde voll mit FECs bestückt, was 5400 Kanälen entspricht und einer anderen Gasmixtur (Ne/N2/CO2 90%/5%/5%) befüllt. Für das optimale Leistungsverhalten der ALICE TPC muß der Digitalprozessor im ALTRO, bestehend aus vier Berechnungseinheiten, mit den passenden Werten konfiguriert werden. Der Datenfluss beginnt mit dem BCS1 (Baseline Correction and Subtraction 1) Modul, das systematische Störungen und die Grundlinie entfernt. Da der ALTRO kontinuierlich das anliegende Signal abtastet, entfernt es automatisch langsame Grundlinienveränderungen, die Beispielsweise durch Temperaturänderungen auftreten können. Gefolgt von dem TCF (Tail Cancellation Filter), der den Schweif des langsam fallenden, vom PASA generierten Signals entfernt. Um die nichtsystematischen Störungen der Grundlinie zu entfernen, folgt die BCS2 (Baseline Correction and Subtraction 2), die auf einer gleitenden Mittelwertsberechnung mit Ausschluß von Detektorsignalen über einen doppelten Schwellenwert basiert. Die finale Einheit für die Signalverarbeitung ist die ZSU (Zero Suppression Unit), die Meßpunkte unterhalb eines definierten Schwellwertes entfernt. Hier wird der weg beschrieben die TCF und BCS1 Parameter aus vorhandenen Detektordaten zu extrahieren. Während der Analyse der Daten von kosmischen Teilchen fiel bei Signalen mit hoher Amplitude (>700 ADC) eine zusätzliche Struktur in dem Schweif auf. Der Monitor wurde deswegen mit einem gleitenden Mittelwertfilter erweitert, worauf sich diese Struktur auch in kleineren Signalen (> 200 ADC) zeigte. Dieses Signal wird von Ionen erzeugt, die zur Kathode oder zu den Pads driften, bisher ist jedoch weder die Streuung der Elektronenlawine an der Anode, noch die Variationsbreite in den erzeugten Elektronlawinen verstanden oder gemessen worden. Eine erfolgreiche Messung, sowie Charakterisierung wird in dieser Arbeit beschrieben. Im Jahr 2005 im Sommer beginnt der Einbau der Gaskammern der TPC in ALICE, die Elektronik folgt am Ende dieses Jahres. Parallel hierzu wurde der Prototyp der TPC wieder in Betrieb genommen und im Frühling wird ein kompletter Sektor mit der Detektorelektronik ausgestattet. An diesen zwei Aufbauten wird die ALTRO Charakterisierung fortgeführt, verfeinert und komplettiert.
The Compressed Baryonic Matter (CBM) experiment will explore the phase diagram of strongly interacting matter in the region of high net baryonic densities. The matter at these extreme conditions will be produced and studied in heavy-ion collisions with a fixed target set-up.
The present work is dedicated to the main component of the CBM experiment - the Silicon Tracking System (STS). The STS comprises of 8 tracking stations with 1292 double sided silicon microstrip sensors. The STS has to enable the reconstruction of up to 1000 charged particle tracks per nucleus-nucleus interaction at the rate of up to 10 MHz, provide a momentum resolution of Δp/p =1%, and withstand the radiation load of up to 1 x 1014 neq/cm2 (neq — radiation dose of 1 MeV neutron equivalent). Self-triggering read-out electronics will be located on the periphery of the detecting planes, and connected to the sensors with low mass micro-cables.
During the R&D phase, as well as in the pre-series and series production phase, the characterization of the sensors, of the front-end electronics and of the complete detector modules has to be performed. It is evident that characterization of more than 1000 silicon microstrip sensors and later of complete detector modules is very time-consuming, and may even damage the objects if not performed carefully. One of the goals of this work was to develop a systematic procedure for the quality assurance for the double-sided silicon microstrip sensors. This includes static optical inspection and visual tests, passive electrical test (such as leakage current, bulk capacitance, inter-strip capacitance & resistances, bias resistance and coupling capacitance), radiation hardness and long-term stability. A strategy for the quality assurance of these sensors is presented, defining the various tests to be performed and the documentation of the results. The techniques and quality assurance criteria will be applied for the pre-series and series production.
With decreasing feature size and increase in functionality and structures, the classical mechanical probe approach for internal fault detection and functional testing faces increasing challenges. In the field of silicon based chips and sensors there is rarely any analysis on the topic of non-invasive or contact-less probing and characterization, despite the fact that the contact-less probing is becoming more and more important as the fabrication technologies become smaller and more susceptible to the parasitic impact of mechanical probes. The silicon micro-strip double sided sensors used in STS have a complex structure, such as 1024 metal electrodes, 2048 bias resistors, 2048 DC pads and 4098 AC pads for probing, several guard rings, and even more in the 6.2 cm x 6.2 cm prototype sensor. Photo-intrusive technique is the best solution for the characterization and investigation of crucial parameters related to the detector operation and its functionality. A photo-intrusive probing is a method in which a non-invasive pulsed laser of a desired wavelength is used to inject the photon into the bulk and resulting in electron-hole pairs (e-h). In a completely depleted silicon sensor the charge injected (or generated) by the pulsed laser beam could be detected as current and shall be used for characterization.
A non-invasive contact-less Laser Test System (LTS) was developed based on a pulsed laser to investigate properties of the silicon sensors. The set-up is able to inject charge locally and scan sensors(or detector modules) with a pulsed infra-red laser driven by a step motor. The LTS is designed to measure sensor response in an automatized procedure at several thousand positions across the sensor with focused infra-
red laser light (spot size = 12 μm , wavelength = 1060 nm). The duration (10 ns) and power (5 mW) of the laser pulses are selected such that the absorption of the laser light in the 300 μm thick silicon sensors produces a number of about 24000 electrons, which is similar to the charge created by the minimum ionizing particles (MIP) in these sensors. The set-up was used to developed characterization procedures to determine the charge sharing between strips, and to measure a qualitative uniformity of the sensor response over the whole active area. The prototype sensors which are tested with the set-up are small prototype sensors (256 strips, pitch = 50 μm on each side) and full-size detector modules (1024 strips/side and pitch = 58 μm). They are read-out using a self-triggering prototype read-out electronic ASIC called n-XYTER. Laser scans for amplitude response, charge sharing in the inter-strip region, and spot-size determination technique are reported. For the verification of the some design parameters, unique methods of determining coupling capacitance, and inter-strip capacitance have been developed. The modules were also tested with proton beams, and the charge sharing in the inter-strip region has been compared to the laser test results.
High-energetic heavy-ion collisions offer the unique opportunity to produce and to study dense nuclear matter in the laboratory. The future Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany, will provide beams of heavy nuclei up to kinetic energies of 11 GeV/nucleon. At these energies, the nuclear matter in the collision zone of two nuclei will be compressed to densities of up to 5 − 10 times the saturation density of atomic nuclei, similar to matter densities existing in the core of massive neutron stars. Under those conditions, nucleons are expected to melt and form a new state of matter, which consists of quarks and gluons, the so called Quark-Gluon Plasma (QGP). The search for such a phase transition from hadronic to partonic matter, and the exploration of the nuclear matter equation-of-state at high densities are the major goals of heavy ion experiments worldwide.
The observables, which are proposed to probe the properties of dense nuclear matter and possible phase transitions, include multi-strange hyperons, antibaryons, lepton pairs, collective flow of identified particles, fluctuations and correlations of various particles, particles containing charm quarks, and hypernuclei. These observables have to be measured in multi-dimensions, i.e. as function of collision centrality, rapidity, transverse momentum, energy, emission angle, etc., which requires extremely high statistics. Moreover, some of these particles are produced very rarely.
Therefore, the Compressed Baryonic Matter (CBM) experiment at FAIR is designed to run at collision rates of up to 10 MHz, in order to perform measurements with unprecedented precision. Due to the complicated decay topology of many observables, no hardware trigger can be applied, and the data have to be analysed online in order to filter out the interesting events.
This strategy requires free-streaming read-out electronics, which provides time stamps to all detector signals, a high performance computer center, and high-speed reconstruction algorithms, which provide an online track and event reconstruction based on time and position information of the detector hits (”4-D“ reconstruction).
The core detector of the CBM experiment is the Silicon Tracking System (STS). The main task of the STS is to provide track reconstruction and momentum de- termination of charged particles originating from beam-target interactions. To fulfil the whole tasks the STS is located in the large gap of a superconducting dipole magnet with a bending power of 1 Tm providing momentum measurements for charged particles. The STS comprises 8 detector stations, which are positioned from 30 cm to 100 cm downstream the target. The corresponding active area of the stations grows up from 40×50 cm 2 up to 100×100 cm 2 with a totalarea of 4 m2. The silicon double-sided sensors exhibit 1024 strips on each side with a stereo angle at p-side of 7.5 ◦ and a strip pitch of 58 μm. The strip length ranges from 2 cm for sensors located in a close vicinity to the beam axis, up to 12 cm for other sensors where the flux of the reaction products drops down substantially. In total, the STS consist of 896 sensors mounted on 106 detector ladders. The detector readout electronics dissipates 40 kW and will be equipped with a CO 2 bi-phase cooling system. The detector including electronics will be mounted in a thermal enclosure to allow for sensor operation at below −5 ◦ C which minimizes radiation induced leakage currents.
The task of the STS is to measure the trajectories of up to 800 charged particles per collision with an efficiency of more than 95% and a momentum resolution of 1 − 2%. In order to guarantee the required performance over the full lifetime of the CBM experiment, the detector system has to have a low material budget, a high granularity, a high signal-to-noise (SNR) ratio, and a high radiation tolerance. As a result of optimisation studies, the STS consists of double-sided silicon microstrip sensors, about 300 μm thick, which have to provide a SNR ratio of more than 10, even after radiation with the expected equivalent lifetime fluence of 10 14 1 MeV n eq cm −2.
This thesis is devoted to the characterization of double-sided silicon microstrip sensors with an emphasis on investigation of their radiation hardness. Different prototypes of double sided silicon sensors produced by two vendors have been irradiated by 23 MeV protons up to the double life time fluence for the CBM experiment (2 × 10 14 1 MeV n eq cm −2 ).
The sensor properties have been characterised before and after irradiation. It was found, that after irradiation with a double lifetime fluence the leakage current increased 1000 times, which results in an increased shot noise. Moreover, the relative charge collection efficiency of irradiated with respect to non-irradiated sensors drops down to 85% for the lifetime equivalent fluence, and down to 73% for the double lifetime fluence, both for the p-side and n-side. For non-irradiated sensors the SNR was found to be in the range of 20 − 25, whereas for irradiated sensors it dropped down to 12 − 17.
In addition to the sensor characterization, a part of this thesis was devoted to the optimisation of the sensor readout scheme. In order to investigate the possible increase of SNR, and to reduce the number of readout channels in the outer aperture of STS, three versions of routing lines have been realized for the p-side readout of the sensor prototype, and have been tested in the laboratory and under beam conditions.
The tests have been performed with different inclination angles between beam direction and sensor surface, corresponding to the polar angle acceptance of the CBM experiment, which is from 2.5 ◦ to 25 ◦.
As a result of the studies carried out in this thesis work, the radiation hardness of the double-sided silicon microstrip sensors developed for the CBM STS detector was confirmed. Also the advantage of individual read-out of sensor channels in the lateral regions of the detector was verified. This allowed to start the tendering process for sensor series production in industry, an important step towards the construction of the detector in the coming years.
In dieser Arbeit wurden zwei Systeme der biologischen Energiewandlung mit verschiedenen spektroskopischen Methoden untersucht und es wurden neue Erkenntnisse über die Funktion und Aktivierung der Proteine Proteorhodopsin und RuBisCO gewonnen. Zusätzlich konnte eine neue methodische Herangehensweise zur Untersuchung von Carboxylierungsreaktionen etabliert werden. Dieser Ansatz bietet in Zukunft breite Anwendungsmöglichkeiten zur Studie dieser biologisch so bedeutenden Reaktionsklasse. Mit Hilfe der Infrarotspektroskopie und vor allem durch den Einsatz von Tieftemperaturmessungen konnte der bisher kontrovers diskutierte Photozyklus von Proteorhodopsin (PR) eingehend charakterisiert werden. Jenseits des gut verstandenen aktiven Transports bei pH 9,0 wurde vor allem der pH 5,1 Photozyklus untersucht. Erstmals konnte auch in Infrarotspektren das M-Intermediat bei pH 5,1 nachgewiesen werden. Dieses Intermediat ist von entscheidender Bedeutung für den aktiven Transport über die Zellmembran und seine Existenz wurde bisher vielfach angezweifelt. Zudem konnte Glu-108 als ein möglicher Protonenakzeptor des Photozyklus bei pH 5,1 identifiziert werden. Durch einen pH-Indikator ließ sich der Nachweis erbringen, dass auch im sauren pH-Bereich Protonen freigesetzt werden. Damit steht fest, dass ein aktiver Protonentransport bei pH 5,1 möglich ist. Zusammen mit Informationen zu protonierbaren Aminosäureseitenketten (vornehmlich Asp und Glu) lässt sich zudem mit Einschränkungen die These unterstützen, dass PR ober- und unterhalb des pKa-Werts von Asp-97 in verschiedene Richtungen Protonen pumpt. Damit ergibt sich ein differenziertes Bild für den pH-abhängigen Photozyklus von PR mit drei pH-Bereichen (pH 9,0, 8,5 bis 5,5 und 5,1) in denen PR unterschiedliche Protonentransportwege zeigt. Als weiteres biologischen System wurde RuBisCO genauer untersucht. Im Fokus der Arbeit war dabei die Aktivierung durch die Bildung eines Lysin-Carbamats im aktiven Zentrum. Obwohl RuBisCO das am häufigsten vorkommende Enzym unseres Planeten ist, in der Kohlenstofffixierung eine bedeutende Rolle spielt und obwohl mehrere Dutzend Kristallstrukturen existieren, gibt es noch immer genügend offene Fragen zur Aktivierung. Mit Hilfe eines Käfig-CO2 konnte die Carbamatbildung im Enzym direkt verfolgt und der Einfluss von Magnesiumionen auf die Aktivierung beobachtet werden. Damit ließ sich ganz klar ausschließen, dass Magnesium bereits für die Carbamatbildung erforderlich ist. Die Koordination von Mg2+ ist erst für die Endiol-Bildung im weiteren Reaktionszyklus essentiell. Zusätzlich wurde gezeigt, dass Azid eine Inhibierung des Enzyms durch die Konkurrenz mit CO2 um die Bindungsstelle auslöst, allerdings verdrängt CO2 das Azidion im Laufe der Zeit. Mit den Ergebnissen für RuBisCO konnte klar gezeigt werden, dass die Kombination aus Käfig-CO2 und Rapid-Scan IR-Spektroskopie ein völlig neues Feld für die Untersuchung von Carboxylierungsreaktionen eröffnet. Gerade die offenen Fragen zu Biotin bindenden Carboxylasen bieten ein breites Anwendungsgebiet für diese Methodik.
Motiviert durch aktuelle atomphysikalische Fragestellungen zur Struktur und Dynamik der Materie im Bereich hochgeladener Schwerionen entstand der Bedarf zur Weiterentwicklung bestehender und zur Entwicklung neuartiger ortsauflösender Detektorsysteme. Die Untersuchung der Struktur ist hauptsächlich durch die hochauflösende spektroskopische Vermessung einzelner Energieniveaus der atomaren Hülle bestimmt und liefert grundlegende Einblicke in den atomaren Aufbau. Dabei stellen diese Resultate gerade bei schweren hochgeladenen Ionen eine exzellente Testmöglichkeit der QED in extrem starken Feldern dar. Die Dynamik der Materie zeigt sich in der Teilchendynamik (hier der Atomhülle) in extrem starken und extrem kurzen elektromagnetischen Feldern, wie sie bei Ion-Atom-Stößen auftreten. Beobachtet werden können hier vor allem Teilchen und Photonen-Polarisationsphänomene. Solche Polarisationseffekte sind jedoch nicht auf das Gebiet der atomaren Hülle beschränkt. Als ein Beispiel sei die Untersuchung laserbeschleunigter Teilchen genannt. Hier kann die Polarimetrie von Röntgenstrahlung, die durch Thomson-Streuung optischer Photonen an den zuvor auf relativistische Geschwindigkeiten beschleunigten Teilchen erzeugt wird, Aufschluß über die Natur des Beschleunigungsprozesses geben. Einblick in die lineare Polarisation der Röntgenphotonen im für unsere Arbeit interessanten Energiebereich von einigen 10 keV bis einigen 100 keV können mit Compton-Polarimetern gewonnen werden. Kommerziell sind Detektorsysteme, die eine ausreichende Granularität in Kombination mit hinreichender Detektordicke besitzen, um hohe Nachweiseffizienzen zu erreichen, jedoch nicht verfügbar. Im Rahmen der vorgelegten Arbeit, die sich mit Techniken der hochaufgelösten Röntgenspektroskopie und der Röntgenpolarimetrie an hochgeladenen Schwerionen befasst, wurden vielfältige Arbeiten an und mit orts-, zeit- und energieauflösenden planaren Ge(i)-Detektorsystemen durchgeführt. Wesentliches Ziel der Arbeit war es, ein zweidimensional ortsauflösendes planares Halbleiterdetektorsystem, das für den Einsatz im Kristallspektrometer FOCAL und als Compton-Polarimeter angepasst ist, bereitzustellen. Hierzu wurde ein 2D-µ-Streifendetektorsystem aufgebaut, das eine Ortsauflösung von 250µm, bzw. 1167µm in orthogonaler Richtung, bei einer Detektordicke von 11mm und eine Energieauflösung von etwa 2 keV für jeden einzelnen Streifen bei 60 keV Photonenenergie gewährleistet. Durch Messungen an der Synchrotronquelle ESRF, Grenoble (Frankreich), wurde die Eignung des Systems als bildgebendes Element im FOCAL Kristallspektrometer bei einer Photonenenergie von 60 keV und als Compton-Polarimeter bei einer Photonenenergie von 210 keV untersucht. Der große Vorteil in FOCAL ein ortsauflösendes Detektorsystem einzusetzen, liegt darin, dass alle interessanten Beugungswinkel simultan beobachtet werden können. Im herkömmlichen Ansatz würde man mit einer einfachen Diode und einem Kollimator den Bereich abfahren. Wegen der geringen Ereignisrate und dem hohen Untergrund ist dies jedoch nicht praktikabel. Herkömmliche Systeme wie CCD oder Gasdetektoren haben nicht die nötige Effizienz oder eine zu hohe Dunkelrate. Zur Untersuchung der für FOCAL wichtigen Eigenschaften wurden mehrere Positionen auf dem Detektor bei niedriger Energie mit einem fein kollimierten Photonenstrahl (50 x 50 µm2) gescannt. Neben der guten Energieauflösung des Detektorsystems von durchschnittlich 2.2 keV bei 60 keV, zeigen die Ergebnisse das homogene Verhalten der Detektoreffizienz, welche essentiell für den spektographischen Einsatz in FOCAL ist. Es konnten keine Hinweise auf messbare Ladungsverluste im Bereich des aktiven Detektorvolumens festgestellt werden. Ebenso konnte die Multiplizität (Anzahl der Streifen einer Detektorseite, die auf ein Ereignis reagieren), mit der ein Photon nachgewiesen wird, eindeutig mit der Strukturierung der Kontakte auf der Kristalloberfläche in Verbindung gebracht werden. Es stellte sich heraus, dass die Ereignisse der Multiplizität zwei dazu verwendet werden können um Ortsauflösungen deutlich unterhalb einer Streifenbreite zu erreichen. Diese Methode kann jedoch nur auf eine größere Anzahl von Ereignissen angewendet werden, nicht jedoch auf einzelne Ereignisse. Um das 2D-Ge(i)-µ-Streifendetektorsystem auf seine Eignung als Compton-Polarimeter zu testen, wurden Daten mit einem nahezu vollständig linear polarisierten Photonenstrahl (98% linear polarisiert) bei einer Energie von 210 keV aufgenommen. Die Daten zeigen die erwartete Dipol-ähnliche Asymmetrie im Ortsbild und dienen als Kalibrationsgrundlage zur Interpretation zukünftiger Experimente zur Polarimetrie in diesem Energiebereich. Parallel hierzu wurde an Simulationsprogrammen auf Basis der etablierten Monte Carlo Software EGS4 gearbeitet. Hiermit wurden Vorhersagen bezüglich des Nachweisverhaltens des Detektors auf linear polarisierte Röntgenstahlung gemacht. Ferner wurde für ein 4x4-Pixel-Polarimeter, das bei der ersten Bestimmung der linearen Polarisation der K-REC Strahlung von U92+ am Speichering ESR der GSI eingesetzt wurde, im Rahmen der Datenanalyse mit den auf EGS4-basierenden Programmen die Detektoreffizienz für linear polarisierte Strahlung einer bestimmten Energie simuliert. Mit diesen Simulationsergebnissen konnten die selbstentwickelten Methoden zur Korrektur der Nachweiswahrscheinlichkeit eines Compton-Ereignisses als Funktion des Wechselwirkungspunkts innerhalb des Detektorkristalls und der Energie erfolgreich verifiziert werden. Die detektorbezogenen Resultate dieser Arbeit fanden ihre erste Anwendung in der FOCAL-Spektrometer Strahlzeit 2006, deren genaue Beschreibung jedoch über den Umfang dieser Arbeit hinausgeht. Ebenso flossen die Erfahrungen, die mit den Detektorsystemen, im speziellen dem 2D-Ge(i)-µ-Streifendetektor, gemacht wurden in die Realisierung eines Si(Li)-Detektors mit 32+32 Streifen zur Compton-Polarimetrie bei niedrigeren Energien (ab 60 keV) ein, der gegenwärtig in ersten Experimenten am ESR eingesetzt wird.
Charge states and energy loss of heavy ions after passing an inductively coupled plasma target
(2019)
In various kinds of fields such as accelerator physics, warm dense matter, high energy density physics, and inertial confinement fusion, heavy ions beam-plasma interaction plays an important role, and abundant investigations have been and are being carried out. Taking advantage of a good level of understanding on the interaction between a swift heavy ions beam and a hydrogen gas discharge plasma, an engineering application of a spherical theta-pinch device as a plasma stripper for FAIR (facility for antiproton and ion research) and a scientific application of a swift heavy ions beam as a novel plasma diagnostic tool are proposed and investigated.
The spherical theta-pinch device is manufactured, improved, and comprehensively tested for its application as a plasma stripper. The device is mainly composed of an evacuated glass vessel that can be filled with gas (for example: hydrogen) and a LRC circuit including a capacitors bank and a set of coils. Discharging the device at an initial hydrogen pressure in the glass vessel and an operation voltage for the capacitors bank, a circuit current oscillates in the LRC circuit. The oscillating circuit current in the set of coils induces a corresponding alternating magnetic field inside the glass vessel to ignite and maintain a hydrogen plasma.
Based on the built setup of circuit and plasma diagnostics, the measurements of circuit current, plasma light emission, plasma shape, and hydrogen Balmer series are carried out. The recorded signals of the circuit current and the plasma light emission of many consecutively repetitive discharges overlap perfectly, which indicate a very good reproducibility of the parameters of the LRC circuit during discharge and the generated plasma. From the measured circuit current, a real energy transfer efficiency is calculated by our proposed new model, which shows its overall tendency varying with the hydrogen pressure and the operation voltage, including the maximum value of 25% occurring at an initial hydrogen pressure of around 25 Pa and a maximum operation voltage of 14 kV. So, the discharge at an initial hydrogen pressure of 20 Pa and an operation voltage of 14 ...
In this thesis, the production of charged kaons and Φ mesons in Au+Au collisions at sqrt sAuAu = 2.4 GeV is studied. At this energy, all particles carrying open and hidden strangeness are produced below their respective free nucleon-nucleon threshold with the corresponding so-called excess energies: sqrt sK+ exc = -0.15 GeV, sqrt sK- exc = -0.46 GeV, sqrt sΦ exc = -0.49 GeVGeV. As a consequence, the production cross sections are very sensitive to medium effects like momentum distributions, two- or multistep collisions, and modification of the in-medium spectral distribution of the produced states [1]. K+ and K- mesons exhibit different properties in baryon dominated matter, since only K- can be resonantly absorbed by nucleons. Although strangeness exchange reactions have been proposed to be the dominant channel for K- production in the analyzed energy regime, the production yield and kinematic distributions could also be explained in smaller systems based on statistical hadronization model fits to the measured particle yields, including a canonical strangeness suppression radius RC, and taking the Φ feed-down to kaons into account [2, 3]. For the first time in central Au+Au collisions at such low energies, it is possible to reconstruct and do a multi differential analysis of K- and Φ mesons. In principle, this should be the ideal environment for strangeness exchange reactions to occur, as the particles are produced deeply sub-threshold in a large and long-living system. Therefore, it is the ultimate test to differentiate between the different sources for K- production in HIC.
In total 7.3x10exp9 of the 40% most central Au(1.23 GeV per nucleon)+Au collisions are analyzed. The data has been recorded with the High Acceptance DiElectron Spectrometer HADES located at Helmholtzzentrum für Schwerionenforschung GSI in April/May 2012. A substantially improved reconstruction method has been employed to reconstruct the hadrons with high purity in a wide phase space region.
The estimated particle multiplicities follow a clear hierarchy of the excess energy: 41.5 ± 2.1|sys protons at mid-rapidity per unit in rapidity, 11.1 ± 0.6|sys ± 0.4|extrapol π-, (3.01 ± 0.03|stat ± 0.15|sys ± 0.30|extrapól) x10 exp -2 K+, (1.94 ± 0.09|stat ± 0.10|sys ± 0.10|extrapol)x10 exp -4 K- and (0.99 ± 0.24|stat ± 0.10|sys ± 0.05|extrapol)x10 exp -4 Φ per event. The multiplicities of the strange hadrons increase more than linear with the mean number of participating nucleons hAparti, supporting the assumption that the necessary energy to overcome the elementary production threshold is accumulated in multi-particle interactions. Transport models predict such an increase, but are overestimating the measured particle yield and are not able to describe the kinematic distributions of K+ mesons perfectly. However, the best description is given by the IQMD model with a density dependent kaonnucleon potential of 40 MeV at nuclear ground state density.
The K-=K+ multiplicity ratio is constant as a function of centrality and follows with (6.45 ± 0.77)x10 exp -3 the trend of increasing with beam energy indicated from previous experiments [4]. The effective temperature of K- TK+eff = (84 ± 6) MeV is found to be systematically lower than the one of K+ TK+eff = (104 ± 1) MeV, which has also been observed by the other experiments.
The Φ=K- ratio is with a value of 0.52 ± 0.16 higher than the one obtained at higher center-of-mass energies and smaller systems. This behavior is predicted from a tuned version of the UrQMD transport model [5], when including higher mass baryonic resonances which can decay into Φ mesons and from statistical hadronization models when suppressing open strangeness canonically. The found ratio is constant as a function of centrality and results with a branching ratio of 48.9%, that ~ 25% of all measured K- originate from Φ feed-down decays. A two component PLUTO simulation, consisting of a pure thermal and a K- contribution originating from Φ decays, can fully explain the observed lower effective temperature in comparison to K+ and the shape of the measured rapidity distribution of K-. As a result, we find no indication for strangeness exchange reactions being the dominant mechanism for K- production in the SIS18 energy regime, if taking the contribution from Φ feed-down decays into account.
The hadron yields for the 20% most central collisions can be described by a statistical hadronization model fit with the chemical freeze-out temperature of Tchem = (68 ± 2) MeV and baryochemical potential of μB = (883 ± 25) MeV, which is higher than expected from previous parameterizations. The analysis of the transverse mass spectra of protons indicate a kinetic freeze-out temperature of Tkin = (70 ± 4) MeV and radial flow velocity of βr = 0.43 ± 0.01, which is in agreement with the parameters obtained from the linear dependence of the effective temperatures on the particle mass Tkin = (71.5 ± 4.2) MeV and βr = 0.28 ± 0.09.
Neutron stars are very dense objects. One teaspoon of their material would have a mass of five billion tons. Their gravitational force is so strong that if an object were to fall from just one meter high it would hit the surface of the respective neutron star at two thousand kilometers per second. In such dense bodies, different particles from the ones present in atomic nuclei, the nucleons, can exist. These particles can be hyperons, that contain non-zero strangeness, or broader resonances. There can also be different states of matter inside neutron stars, such as meson condensates and if the density is height enough to deconfine the nucleons, quark matter. As new degrees of freedom appear in the system, different aspects of matter have to be taken into account. The most important of them being the restoration of the chiral symmetry. This symmetry is spontaneously broken, which is a fact related to the presence of a condensate of scalar quark-antiquark pairs, that for this reason is called chiral condensate. This condensate is present at low densities and even in vacuum. It is important to remember at this point that the modern concept of vacuum is far away from emptiness. It is full of virtual particles that are constantly created and annihilated, being their existence allowed by the uncertainty principle. At very high temperature/density, when the composite particles are dissolved into constituents, the chiral consensate vanishes and the chiral symmetry is restored. To explain how and when chiral symmetry is restored in neutron stars we use a model called non-linear sigma model. This is an effective quantum relativistic model that was developed in order to describe systems of hadrons interacting via meson exchange. The model was constructed from symmetry relations, which allow it to be chiral invariant. The first consequence of this invariance is that there are no bare mass terms in the lagrangian density, causing all, or most of the particles masses to come from the interactions with the medium. There are still other interesting features in neutron stars that cannot be found anywhere else in nature. One of them is the high isospin asymmetry. In a normal nucleus, the amount of protons and neutrons is more or less the same. In a neutron star the amount of neutrons is much higher than the protons. The resulting extra energy (called Fermi energy) increases the energy of the system, allowing the star to support more mass against gravitational collapse. As a consequence of that in early stages of the neutron star evolution, when there are still many trapped neutrinos, the proton fraction is higher than in later stages and consequently the maximum mass that the star can support against gravity is smaller. This, between many other features, shows how the microscopic phenomena of the star can reflect into the macroscopic properties. Another important property of neutron stars is charge neutrality. It is a required assumption for stability in neutron stars, but there are others. One example is chemical equilibrium. It means that the number of particles from each kind is not conserved, but they are created and annihilated through specific reactions that happen at the same rate in both directions. Although to calculate microscopic physics of neutron stars the space-time of special relativity, the Minkowski space, can be used, this is not true for the global properties of the star. In this case general relativity has to be used. The solution of Einstein's equations simplified to static, spherical and isotropic stars correspond to the configurations in which the star is in hydrostatic equilibrium. That means that the internal pressure, coming mainly from the Fermi energy of the neutrons, balances the gravity avoiding the collapse. When rotation is included the star becomes more stable, and consequently, can be more massive. The movement also makes it non-spherical, what requires the metric of the star to also be a function of the polar coordinate. Another important feature that has to be taken into account is the dragging of the local inertial frame. It generates centrifugal forces that are not originated in interactions with other bodies, but from the non-rotation of the frame of reference within which observations are made. These modifications are introduced through the Hartle's approximation that solves the problem by applying perturbation theory. In the mean field approximation, the couplings as well as the parameters of the non-linear sigma model are calibrated to reproduce massive neutron stars. The introduction of new degrees of freedom decreases the maximum mass allowed for the neutron star, as they soften the equation of state. In practice, the only baryons present in the star besides the nucleons are the Lambda and Sigma-, in the case in which the baryon octet is included, and Lambda and Delta-,0,+,++, in the case in which the baryon decuplet is included. The leptons are included to ensure charge neutrality. We choose to proceed our calculations including the baryon octet but not the decuplet, in order to avoid uncertainties in the couplings. The couplings of the hyperons were fitted to the depth of their potentials in nuclei. In this case the chiral symmetry restoration can be observed through the behavior of the related order parameter. The symmetry begins to be restored inside neutron stars and the transition is a smooth crossover. Different stages of the neutron star cooling are reproduced taking into account trapped neutrinos, finite temperature and entropy. Finite-temperature calculations include the heat bath of hadronic quasiparticles within the grand canonical potential of the system. Different schemes are considered, with constant temperature, metric dependent temperature and constant entropy. The neutrino chemical potential is introduced by fixing the lepton number in the system, that also controls the amount of electrons and protons (for charge neutrality). The balance between these two features is delicate and influenced mainly by the baryon number conservation. Isolated stars have a fixed number of baryons, which creates a link between different stages of the cooling. The maximum masses allowed in each stage of the cooling process, the one with high entropy and trapped neutrinos, the deleptonized one with high entropy, and the cold one in beta equilibrium. The cooling process is also influenced by constraints related to the rotation of the star. When rotation is included the star becomes more stable, and consequently, can be more massive. The movement also deforms it, requiring the metric of the star to include modifications that are introduced through the use of perturbation theory. The analysis of the first stages of the neutron star, when it is called proto-neutron star, gives certain constraints on the possible rotation frequencies in the colder stages. Instability windows are calculated in which the star can be stable during certain stages but collapses into black holes during the cooling process. In the last part of the work the hadronic SU(3) model is extended to include quark degrees of freedom. A new effective potential to the order parameter for deconfinement, the Polyakov loop, makes the connection between the physics at low chemical potential and hight temperature of the QCD phase diagram with the height chemical potential and low temperature part. This is done through the introduction of a chemical potential dependency on the already temperature dependent potential. Analyzing the effect of both order parameters, the chiral condensate and the Polyakov loop, we can drawn a phase diagram for symmetric as well as for star matter. The diagram contains a crossover region as well as a first order phase transition line. The new couplings and parameters of the model are chosen mainly to fit lattice QCD, including the position of the critical point. Finally, this matter containing different degrees of freedom (depending on which phase of the diagram we are) is used to calculate hybrid star properties.
In this thesis, a novel 257 kHz chopper device was numerically developed, technically designed and experimentally commissioned; a 4-solenoid, low-energy ion beam transport line was numerically investigated, installed and experimentally commissioned; and a novel massless beam-separation system was numerically developed.
The chopper combines a pulsed electric field with a static magnetic field in an ExB or Wien-filter type field configuration. Chopped beam pulses with a 257 kHz repetition rate and rise times of 110 ns were experimentally achieved using a 14 keV helium beam.
Due to the achieved results, the complete LEBT line for the future Frankfurt Neutron Source FRANZ is ready to deliver a dc or a pulsed beam. At the same time, the LEBT section represents an attractive test stand for the study of low-energy ion beams. It combines magnetic lenses, which allow space-charge compensated beam transport, and a chopper system capable of producing short beam pulses in the hundred nanosecond range. Since these beam pulses are transported onwards, their longitudinal and transverse properties can be analyzed. The pulse duration and time of flight are well below the rise time for the space-charge compensation through residual gas ionization. This opens the possibility for dedicated investigations of the transport of short, low-energy beam pulses including longitudinal and transverse space-charge effects and of relevant issues like the dynamics of space-charge compensation and electron effects in short pulses.
The realization of a fast and robust closed orbit feedback (COFB) system for the on-ramp orbit correction at SIS18 synchrotron of FAIR project is reported in this thesis. SIS18 has some peculiar behaviors including on-ramp optics variation, very short lengths of the ramps (200 ms to 1 s) and a cycle-to-cycle variation of beam parameters. The realized fast COFB system being robust against above mentioned features of SIS18 is a first of its kind and the course to its realization led to some novel contributions in the field of closed orbit correction. A new method relying on the discrete Fourier transform (DFT)-based decomposition of the orbit response matrix (ORM) has been introduced, exploiting the symmetry in the arrangement of beam position monitors (BPMs) and the corrector magnets in the synchrotrons. A nearest-circulant approximation has also been introduced for synchrotrons having slight deviation from the symmetry, making the method applicable to a vast majority of synchrotrons. Moreover, the performance and the stability analysis of COFB systems in the presence of ORM mismatch between the synchrotron and the feedback controller is presented. The COFB systems are divided into slow and fast regimes and a new stability criterion consistent with measurements, is introduced. The practicality of the criterion is verified experimentally at COSY Jülich and is used for the analysis of various sources of ORM mismatch at SIS18. The commissioning of the SIS18 COFB system is also reported in detail which relies on Libera Hadron as the main hardware resource for the controller implementation. The on-ramp orbit correction is demonstrated for the horizontal plane of SIS18, for the disturbance rejection up to 600 Hz.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.
The strong force is one of the four fundamental interactions, and the theory of it is called Quantum Chromodynamics (QCD). A many-body system of strongly interacting particles (QCD matter) can exist in different phases depending on temperature (T) and baryonic chemical potential (µB). The phases and transitions between them can be visualized as µB−T phase diagram. Extraction of the properties of the QCD matter, such as compressibility, viscosity and various susceptibilities, and its Equation of State (EoS) is an important aspect of the QCD matter study. In the region of near-zero baryonic chemical potential and low temperatures the QCD matter degrees of freedom are hadrons, in which quarks and gluons are confined, while at higher temperatures partonic (quarks and gluons) degrees of freedom dominate. This partonic (deconfined) state is called quark-gluon plasma (QGP) and is intensively studied at CERN and BNL. According to lattice QCD calculations at µB=0 the transition to QGP is smooth (cross-over) and takes place at T≈156 MeV. The region of the QCD phase diagram, where matter is compressed to densities of a few times normal nuclear density (µB of several hundreds MeV), is not accessible for the current lattice QCD calculations, and is a subject of intensive research. Some phenomenological models predict a first order phase transition between hadronic and partonic phases in the region of T≲100 MeV and µB≳500 MeV. Search for signs of a possible phase transition and a critical point or clarifying whether the smooth cross-over is continuing in this region are the main goals of the near future explorations of the QCD phase diagram.
In the laboratory a scan of the QCD phase diagram can be performed via heavy-ion collisions. The region of the QCD phase diagram at T≳150 MeV and µB≈0 is accessible in collisions at LHC energies (√sNN of several TeV), while the region of T≲100 MeV and µB≳500 MeV can be studied with collisions at √sNN of a few GeV. The QCD matter created in the overlap region of colliding nuclei (fireball) is rapidly expanding during the collision evolution. In the fireball there are strong temperature and pressure gradients, extreme electromagnetic fields and an exchange of angular momentum and spin between the system constituents. These effects result in various collective phenomena. Pressure gradients and the scattering of particles, together with the initial spatial anisotropy of the density distribution in the fireball, form an anisotropic flow - a momentum (azimuthal) anisotropy in the emission of produced particles. The correlation of particle spin with the angular momentum of colliding nuclei leads to a global polarization of particles. A strong initial magnetic field in the fireball results in a charge dependence and particle-antiparticle difference of flow and polarization.
Anisotropic flow is quantified by the coefficients vₙ from a Fourier decomposition of the azimuthal angle distribution of emitted particles relative to the reaction plane spanned by beam axis and impact parameter direction. The first harmonic coefficient v₁ quantifies the directed flow - preferential particle emission either along or opposite to the impact parameter direction. The v₁ is driven by pressure gradients in the fireball and thus probes the compressibility of the QCD matter. The change of the sign of v₁ at √sNN of several GeV is attributed to a softening of the EoS during the expansion, and thus can be an evidence of the first order phase transition. The global polarization coefficient PH is an average value of the hyperon’s spin projection on the direction of the angular momentum of the colliding system. It probes the dynamics of the QCD matter, such as vorticity, and can shed light on the mechanism of orbital momentum transfer into the spin of produced particles.
In collisions at √sNN of several GeV, which probe the region of the QCD phase diagram at T≲100 MeV and µB≳500 MeV, hadron production is dominated by u and d quarks. Hadrons with strange quarks are produced near the threshold, what makes their yields and dynamics sensitive to the density of the fireball. Thus measurement of flow and polarization, in particular of (multi-)strange particles, provides experimental constraints on the EoS, that allows to extract transport coefficients of the QCD matter from comparison of data with theoretical model calculations of heavy-ion collisions.
For continuation of the annotation see the PDF of thesis
In this work we study the non-equilibrium dynamics of a quark-gluon plasma, as created in heavy-ion collisions. We investigate how big of a role plasma instabilities can play in the isotropization and equilibration of a quark-gluon plasma. In particular, we determine, among other things, how much collisions between the particles can reduce the growth rate of unstable modes. This is done both in a model calculation using the hard-loop approximation, as well as in a real-time lattice simulation combining both classical Yang-Mills-fields as well as inter-particle collisions. The new extended version of the simulation is also used to investigate jet transport in isotropic media, leading to a cutoff-independent result for the transport coefficient $hat{q}$. The precise determination of such transport coefficients is essential, since they can provide important information about the medium created in heavy-ion collisions. In anisotropic media, the effect of instabilities on jet transport is studied, leading to a possible explanation for the experimental observation that high-energy jets traversing the plasma perpendicular to the beam axis experience much stronger broadening in rapidity than in azimuth. The investigation of collective modes in the hard-loop limit is extended to fermionic modes, which are shown to be all stable. Finally, we study the possibility of using high energy photon production as a tool to experimentally determine the anisotropy of the created system. Knowledge of the degree of local momentum-space anisotropy reached in a heavy-ion collision is essential for the study of instabilities and their role for isotropization and thermalization, because their growth rate depends strongly on the anisotropy.
ALICE (A Large Ion Collider Experiment), is the dedicated heavy-ion experiment at the Large Hadron Collider (LHC) at CERN. It is optimised to reconstruct and identify the particles created in a lead-lead collision with a centre of mass energy of 5.5TeV. The main tracking detector is a large-volume time-projection chamber (TPC). With an active volume of about 88m^3 and a total readout area of 32.5m^2 it is the most challenging TPC ever build. A central electrode divides the 5m long detector into two drift regions. Each readout side is subdivided into 18 inner and 18 outer multi-wire proportional read-out chambers. The readout area is subdivide into 557568 pads, where each pad is read out by and electronics chanin. A complex calibration is needed in order to reach the design position-resolution of the reconstructed particle tracks of about 200um. One part of the calibration lies in understanding the electronic-response. The work at hand presents results of the pedestal and noise behaviour of the front-end electronics (FEE), measurements of the pulse-shaping properties of the FEE using results obtained with a calibration pulser and measurements performed with the laser-calibration system. The data concerned were taken during two phases of the TPC commissioning. First measurements were performed in the clean room where the TPC was built. After the TPC was moved underground and built into the experiment, a second round of commissioning took place. Noise measurements in the clean room revealed a very large fraction of pads with noise values larger than the design specifications. The unexpected high noise values could be explained by the 'ground bounce' effect. Two modifications helped to reduce this effect: A desynchronisation in the the start of the readout of groups of channels and a modification in the grounding scheme of the FEE. Further noise measurements were carried out after the TPC has been moved to the experimental area underground. Here even a larger fraction of channels showed too large noise values. This could be traced back to a common mode current injected by the electronics power supplies. To study the shaping properties of the FEE a calibration pulser was used. To generate signals in the FEE a pulse is injected to the cathode wires of the read-out chambers. Due to manufacturing tolerances slight channel-by-channel variations of the shaping properties are expected. This effects the determination of the arrival time as well as the measured integral signal of the induced charge and has to be corrected. The measured arrival time variations follow a Gaussian distribution with a width (sigma) of 6.2ns. This corresponds to an error of the cluster position of about 170um. The charge variations are on the level of 2.8%. In order to reach the intrinsic resolution on the measurement of the specific energy loss of the particles (6%) those variations have to be taken into account. The photons of the laser-calibration system are energetic enough to emit photo electrons off metallic surfaces. Most interesting for the detector calibration are photo electrons from the central electrode. The laser light is intense enough to get a signal in all readout channels of the TPC. Since the central electrode is a smooth surface, differences in the arrival time between sectors reveal mechanical displacements of the readout sectors and can be used to correct for this effect. In addition the measurements can be used to determine the electron drift velocity in the TPC gas. The drift velocity measurements have shown a vertical as well as a radial gradient. The first can be explained by the temperature gradient, which naturally builds up in the 5m high detector. The second gradient is most probably caused by a relative conical deformation of the readout plane and the central electrode.
A new era in experimental nuclear physics has begun with the start-up of the Large Hadron Collider at CERN and its dedicated heavy-ion detector system ALICE. Measuring the highest energy density ever produced in nucleus-nucleus collisions, the detector has been designed to study the properties of the created hot and dense medium, assumed to be a Quark-Gluon Plasma.
Comprised of 18 high granularity sub-detectors, ALICE delivers data from a few million electronic channels of proton-proton and heavy-ion collisions.
The produced data volume can reach up to 26 GByte/s for central Pb–Pb
collisions at design luminosity of L = 1027 cm−2 s−1 , challenging not only the data storage, but also the physics analysis. A High-Level Trigger (HLT) has been built and commissioned to reduce that amount of data to a storable value prior to archiving with the means of data filtering and compression without the loss of physics information. Implemented as a large high performance compute cluster, the HLT is able to perform a full reconstruction of all events at the time of data-taking, which allows to trigger, based on the information of a complete event. Rare physics probes, with high transverse momentum, can be identified and selected to enhance the overall physics reach of the experiment.
The commissioning of the HLT is at the center of this thesis. Being deeply embedded in the ALICE data path and, therefore, interfacing all other ALICE subsystems, this commissioning imposed not only a major challenge, but also a massive coordination effort, which was completed with the first proton-proton collisions reconstructed by the HLT. Furthermore, this thesis is completed with the study and implementation of on-line high transverse momentum triggers.
Different approaches are possible when it comes to modeling the brain. Given its biological nature, models can be constructed out of the chemical and biological building blocks known to be at play in the brain, formulating a given mechanism in terms of the basic interactions underlying it. On the other hand, the functions of the brain can be described in a more general or macroscopic way, in terms of desirable goals. This goals may include reducing metabolic costs, being stable or robust, or being efficient in computational terms. Synaptic plasticity, that is, the study of how the connections between neurons evolve in time, is no exception to this. In the following work we formulate (and study the properties of) synaptic plasticity models, employing two complementary approaches: a top-down approach, deriving a learning rule from a guiding principle for rate-encoding neurons, and a bottom-up approach, where a simple yet biophysical rule for time-dependent plasticity is constructed.
We begin this thesis with a general overview, in Chapter 1, of the properties of neurons and their connections, clarifying notations and the jargon of the field. These will be our building blocks and will also determine the constrains we need to respect when formulating our models. We will discuss the present challenges of computational neuroscience, as well as the role of physicists in this line of research.
In Chapters 2 and 3, we develop and study a local online Hebbian self-limiting synaptic plasticity rule, employing the mentioned top-down approach. Firstly, in Chapter 2 we formulate the stationarity principle of statistical learning, in terms of the Fisher information of the output probability distribution with respect to the synaptic weights. To ensure that the learning rules are formulated in terms of information locally available to a synapse, we employ the local synapse extension to the one dimensional Fisher information. Once the objective function has been defined, we derive an online synaptic plasticity rule via stochastic gradient descent.
In order to test the computational capabilities of a neuron evolving according to this rule (combined with a preexisting intrinsic plasticity rule), we perform a series of numerical experiments, training the neuron with different input distributions.
We observe that, for input distributions closely resembling a multivariate normal distribution, the neuron robustly selects the first principal component of the distribution, showing otherwise a strong preference for directions of large negative excess kurtosis.
In Chapter 3 we study the robustness of the learning rule derived in Chapter 2 with respect to variations in the neural model’s transfer function. In particular, we find an equivalent cubic form of the rule which, given its functional simplicity, permits to analytically compute the attractors (stationary solutions) of the learning procedure, as a function of the statistical moments of the input distribution. In this way, we manage to explain the numerical findings of Chapter 2 analytically, and formulate a prediction: if the neuron is selective to non-Gaussian input directions, it should be suitable for applications to independent component analysis. We close this section by showing how indeed, a neuron operating under these rules can learn the independent components in the non-linear bars problem.
A simple biophysical model for time-dependent plasticity (STDP) is developed in Chapter 4. The model is formulated in terms of two decaying traces present in the synapse, namely the fraction of activated NMDA receptors and the calcium concentration, which serve as clocks, measuring the time of pre- and postsynaptic spikes. While constructed in terms of the key biological elements thought to be involved in the process, we have kept the functional dependencies of the variables as simple as possible to allow for analytic tractability. Despite its simplicity, the model is able to reproduce several experimental results, including the typical pairwise STDP curve and triplet results, in both hippocampal culture and layer 2/3 cortical neurons. Thanks to the model’s functional simplicity, we are able to compute these results analytically, establishing a direct and transparent connection between the model’s internal parameters and the qualitative features of the results.
Finally, in order to make a connection to synaptic plasticity for rate encoding neural models, we train the synapse with Poisson uncorrelated pre- and postsynaptic spike trains and compute the expected synaptic weight change as a function of the frequencies of these spike trains. Interestingly, a Hebbian (in the rate encoding sense of the word) BCM-like behavior is recovered in this setup for hippocampal neurons, while dominating depression seems unavoidable for parameter configurations reproducing experimentally observed triplet nonlinearities in layer 2/3 cortical neurons. Potentiation can however be recovered in these neurons when correlations between pre- and postsynaptic spikes are present. We end this chapter by discussing the relation to existing experimental results, leaving open questions and predictions for future experiments.
A set of summary cards of the models employed, together with listings of the relevant variables and parameters, are presented at the end of the thesis, for easier access and permanent reference for the reader.
Zahlreiche physikalische Prozesse, wie Bremsstrahlung, Synchrotronstrahlung oder Radiative Rekombination verursachen die Emission linear hochpolarisierter Röntgenstrahlung. Dennoch wird technisch nutzbare hochpolarisierte Röntgenstrahlung derzeit fast ausschließlich von einigen wenigen hochspezialisierten Synchrotronlichtquellen oder Freie Elektronen Lasern zur Verfügung gestellt. In der vorliegenden Arbeit wurde der Radiative Einfang in die K-Schale von nacktem Xenon verwendet, um erstmals eine Quelle einstellbarer, monoenergetischer sowie hochpolarisierter Röntgenstrahlung (97%) in einer Speicherringumgebung zu realisieren. Zum Nachweis der Polarisation der Strahlung wurde erstmals auch ein neuartiger orts-, zeit- und energieauflösender Si(Li) Streifendetektor als Röntgenpolarimeter eingesetzt, mit dem die Beschränkungen traditioneller Compton - Polarimeter umgangen werden können. Der gemessene Grad hoher linearer Polarisation, der mit den Vorhersagen durch die Theorie übereinstimmt, ist durchaus bemerkenswert, da die hochpolarisierte Röntgensstrahlung in einem Stoßprozess zwischen einem unpolarisierten Ionenstrahl und einem unpolarisierten Gasjet zustande kam. Dies bedeutet, dass der Radiative Elektroneneinfang ein ideales Werkzeug darstellt, um hochpolarisierte, energetisch frei wählbare Röntgenstrahlung in einer Speicherringumgebung zu erzeugen. Die Entwicklung der neuen 2D Detektortechnologie eröffnet auch Möglichkeiten zur experimentellen Untersuchung der Details atomphysikalischer Vorgänge. So konnte im Rahmen dieser Arbeit durch die Kombination des verwendeten Detektors und der Beschleunigereinrichtung der GSI erstmals experimentell die lineare Polarisation der Strahlung des Radiativen Elektroneneinfangs in die energetisch partiell aufgelösten L-Unterschalen von nacktem Uran bestimmt werden. Zudem wurden neue und präzisere Werte für die Polarisation der Einfangstrahlung in die K-Schalen von nacktem und wasserstoffähnlichem Uran gemessen. Die theoretischen Vorhersagen zeigten eine starke Sensitivität von Messungen linearer Polarisation der bei dem Radiativen Elektroneneinfang emittierten Strahlung auf den Einfluss der insbesondere bei Schwerionen - Atom - Stößen zu berücksichtigenden höheren Ordnungen der Multipolentwicklung. Während die Effekte bei der Messung von Winkelverteilungen des Radiativen Elektroneneinfangs gerade bei den kleineren Winkeln im Bezug auf die Ionenstrahlachse im Laborsystem vergleichsweise gering ausfallen, ist hier ein sehr ausgeprägter Effekt der Depolarisation zu beobachten. Hier liegt der wesentliche Unterschied zwischen den in dieser Arbeit vorgestellten Messungen der linearen Polarisation der Strahlung des Radiativen Einfangs in Xenon sowie in Uran. Das Auftreten der starken Depolarisation veranschaulicht die starke Abhängigkeit der Polarisationscharakteristik des REC-Prozesses von der Kernladungszahl des Projektils. Abschließend sei der Schritt zu der erstmals für diese Arbeit verwendeten Messtechnik mit einem hochaufgelösten Streifendetektor hervorgehoben. Im Gegensatz zu früheren Polarisationsmessungen mit grob dimensionierten Pixeldetektoren waren zu der Gewinnung der hier vorgestellten Messungen praktisch keinerlei zusätzliche Annahmen oder Simulationen zu der Interpretation der gewonnenen Winkelverteilungen notwendig. So konnte mit dem System bereits während des Experimentes eine erste Abschätzung der linearen Polarisation der beobachteten Strahlung durchgeführt werden. Diese Tatsache wird es in naher Zukunft ermöglichen, das für die niederenergetische Röntgenstrahlung weitgehend neue ”Fenster” polarimetrischer Messungen für weitere atomphysikalische Prozesse zu öffnen.
Nanomaterials, i.e., materials that are manufactured at a very small spatial scale, can possess unique physical and chemical properties and exhibit novel characteristics as compared to the same material without nanoscale features. The reduction of size down to the nanometer scale leads to the abundance of potential applications in different fields of technology. For instance, tailoring the physicochemical properties of nanomaterials for modification of their interaction with a biological environment has been reflected in a number of biomedical applications.
Strategies to choose the size and the composition of nanoscale systems are often hindered by a limited understanding of interactions that are difficult to study experimentally. However, this goal can be achieved by means of advanced computer simulations. This thesis explores, from a theoretical and a computational viewpoints, stability, electronic and thermo-mechanical properties of nanoscale systems and materials which are related to biomedical applications.
We examine the ability of existing classical interatomic potentials to reproduce stability and thermo-mechanical properties of metal systems, assuming that these potentials have been fitted to describe ground-state properties of the perfect bulk materials.
It is found that existing classical interatomic potentials poorly describe highly-excited vibrational states when the system is far from the potential energy minimum. On the other hand, construction of a reliable computational model is essential for further development of nanomaterials for applications. A new interatomic potential that is able to correctly reproduce both the melting temperature and the ground-state properties of different metals, such as gold, platinum, titanium, and magnesium, by means of classical molecular dynamics simulations is proposed in this work. The suggested modification of a many-body potential has a general nature and can be utilized for similar numerical exploration of thermo-mechanical properties of a broad range of molecular and solid state systems experiencing phase transitions.
The applicability of the classical interatomic potentials to the description of nanoscale systems, consisting of several tens-hundreds of atoms, is also explored in this study. This issue is important, for instance, in the case of nanostructured materials, where grains or nanocrystals have a typical size of about a few nanometers. We validate classical potentials through the comparison with density-functional theory calculations of small
atomic clusters made of titanium and nickel. By this analysis, we demonstrate that the classical potentials fitted to describe ground-state properties of a bulk material can describe the energetics of nanoscale systems with a reasonable accuracy.
In this work, we also analyze electronic properties of nanometer-size nanoparticles made of gold, platinum, silver, and gadolinium; nanoparticles composed of these materials are of current interest for radiation therapy applications. We focus on the production of low-energy electrons, having the kinetic energy from a few electronvolts to several tens of electronvolts. It is currently established that the low-energy secondary electrons of such energies play an important role in the nanoscale mechanisms of biological damage resulting from ionizing radiation. We provide a methodology for analyzing the dynamic response of nanoparticles of the experimentally relevant sizes, namely of about several nanometers, exposed to ionizing radiation. Because of a large number of constituent atoms (about 1000 −10000 atoms) and consequently high computational costs, the electronic properties of such systems can hardly be described by means of ab initio methods based on a quantum-mechanical treatment of electrons, and this analysis should rely on model approaches. By comparing the response of smaller systems (of about 1 nm size) calculated within the ab initio- and the model framework, we validate this methodology and make predictions for the electron production in larger systems.
We have revealed that a significant increase in the number of the low-energy electrons emitted from nanometer-size noble metal nanoparticles arises from collective electron excitations formed in the systems. It is demonstrated that the dominating mechanisms of electron yield enhancement are related to the formation of plasmons excited in a whole system and of atomic giant resonances formed due to excitation of valence d electrons in individual atoms of a nanoparticle. Being embedded in a biological medium, the noble metal nanoparticles thus represent an important source of low-energy electrons, able to produce a significant irrepairable damage in biological systems.
A general methodology for studying electronic properties of nanosystems is used to make quantitative predictions for electron production by non-metal nanoparticles. The analysis illustrates that due to a prominent collective response to an external electric field, carbon nanoparticles embedded in a biological medium also enhance the production of low-energy electrons. The number of low-energy electrons emitted from carbon nanoparticles is demonstrated to be several times higher as compared to the case of liquid water.
The equation of state (EoS) of matter at extremely high temperatures and densities is currently not fully understood, and remains a major challenge in the field of nuclear physics. Neutron stars harbor such extreme conditions and therefore serve as celestial laboratories for constraining the dense matter EoS. In this thesis, we present a novel algorithm that utilizes the idea of Bayesian analysis and the computational efficiency of neural networks to reconstruct the dense matter equation of state from mass-radius observations of neutron stars. We show that the results are compatible with those from earlier works based on conventional methods, and are in agreement with the limits on tidal deformabilities obtained from the gravitational wave event, GW170817. We also observe that the resulting squared speed of sound from the reconstructed EoS features a peak, indicating a likely convergence to the conformal limit at asymptotic densities, as expected from quantum chromodynamics. The novel algorithm can also be applied across various fields faced with computational challenges in solving inverse problems. We further examine the efficiency of deep learning methods for analyzing gravitational waves from compact binary coalescences in this thesis. In particular, we develop a deep learning classifier to segregate simulated gravitational wave data into three classes: signals from binary black hole mergers, signals from binary neutron star mergers, or white noise without any signals. A second deep learning algorithm allows for the regression of chirp mass and combined tidal deformability from simulated binary neutron star mergers. An accurate estimation of these parameters is crucial to constrain the underlying EoS. Lastly, we explore the effects of finite temperatures on the binary neutron star merger remnant from GW170817. Isentropic EoSs are used to infer the frequencies of the rigidly rotating remnant and are noted to be significantly lower compared to previous estimates from zero temperature EoSs. Overall, this thesis presents novel deep learning methods to constrain the neutron star EoS, which will prove useful in future, as more observational data is expected in the upcoming years.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
In der Experimentierhalle der Physik am Campus Riedberg der Goethe – Universität wird gegenwärtig die Beschleunigeranlage FRANZ aufgebaut. FRANZ steht für Frankfurter Neutronenquelle am Stern-Gerlach-Zentrum. Die Anlage bietet vielfältige Experimentiermöglichkeiten in der Untersuchung intensiver, gepulster Protonenstrahlen. Ein Forschungsschwerpunkt an den sekundären Neutronenstrahlen sind Messungen zur nuklearen
Astrophysik. Die Neutronen werden durch einen 2 MeV Protonenstrahl mittels der Reaktion 7Li (p, n) 7Be erzeugt. Die geplanten Experimente erfordern sowohl eine hier weltweit erstmals realisierte Pulsrepetitionsrate von bis zu 250 kHz bei Pulsströmen im 100 mA – Bereich als auch eine extreme Pulskompression auf eine Nanosekunde bei dann auftretenden Pulsströmen im Ampere – Bereich. Daneben ist auch ein Dauerstrich – Strahlbetrieb im mA – Strombereich möglich. Auch viele einzelne Beschleunigerkomponenten wie die Ionenquelle, der Chopper zur Pulsformung, die hochfrequent gekoppelte RFQ-IH-Kombination, der Rebuncher in Form einer CH – Struktur und der Bunchkompressor sind Neuentwicklungen. Mittlere Strahlleistungen von bis zu 24 kW treten im Niederenergiestrahltransportbereich auf, da die Ionenquelle grundsätzlich im Dauerstrich zu betreiben ist, auch bei Hochstrom mit hohen Pulsrepetitionsraten. Der Personen- und Geräteschutz spielt damit auch eine wesentliche Rolle bei der Auslegung des Kontrollsystems für FRANZ. Der Aufbau von FRANZ und seine wesentlichen Komponenten werden in Kapitel 2 erläutert. Die vielen unterschiedlichen Komponenten wie Hochspannungsbereich, Magneten, Hochfrequenzbauteile und Kavitäten, Vakuumbauteile, Strahldiagnose und Detektoren machen plausibel, dass auch das Kontrollsystem für eine solche Anlage speziell ausgelegt werden muss. In Kapitel 4 werden zum Vergleich die Konzepte zur Steuerung und Regelung aktueller, großer Beschleunigerprojekte aufgezeigt, nämlich für die „European Spallation Source ESS“ und für die „Facility for Antiproton and Ion Research FAIR“. In der vorliegenden Arbeit wurde die Ionenquelle als komplexe Beschleunigerkomponente ausgewählt, um Entwicklungen zur Steuerung und Regelung durchzuführen und zu testen. Zum Anfahren und Betreiben der Ionenquelle wurde ein Flussdiagramm (Abb. 5.15) entwickelt und realisiert. Im Detail wurden Untersuchungen zur Abhängigkeit der Heizkathodenparameter von der Betriebsdauer gemacht. Daraus konnte ein Algorithmus zur Vorhersage eines rechtzeitigen Filamentaustausches abgeleitet werden. Weiterhin konnte die Nachregelung des Kathodenheizstromes automatisiert werden, um damit die Bogenentladungsspannung innerhalb eines Intervalls von ± 0.5 V zu stabilisieren. Das Anfahren des Filamentstroms wurde ebenfalls automatisiert. Dazu wird die Vakuumdruckänderung in Abhängigkeit der Filamentstromerhöhung gemessen, ausgewertet und daraus der nächste erlaubte Stromerhöhungsschritt abgeleitet. Auf diese Weise wird der Betriebszustand schneller und kontrollierter erreicht als bei manuellem Hochfahren. Das Ziel eines unbemannten Ionenquellenbetriebs ist damit näher gerückt. In einem ersten Test zur Komponentensteuerung und zur Datenaufnahme wurde ein Ionenstrahl extrahiert und durch den ersten Fokussierungsmagneten – einen Solenoiden – transportiert. Es wurde der Erregungsstrom des Solenoiden sowie die Strahlenergie automatisch durchgefahren, die Daten abgespeichert und daraus ein Kontourplot zum gemessenen Strahlstrom hinter der Fokussierlinse erstellt (Abb. 5). Die vorliegende Arbeit beschäftigt sich nur mit den „langsamen“ Steuerungs- und Regelungsprozessen, während die schnellen Prozesse im Hochfrequenzregelungssystem unabhängig geregelt werden. Neben der Überwachung des Betriebszustandes aller Komponenten werden auch alle für den Service und die Personensicherheit benötigten Daten weggeschrieben. Das System basiert auf MNDACS (Mesh Networked Data Acquisition and Control System) und ist in JAVA geschrieben. MNDACS besteht aus einem Kernel, welcher die Komponententreiber-Software sowie den Netzwerkserver und das graphische Netzwerkinterface (GUI) betreibt. Weterhin gehört dazu das Driver Abstraction Layer (DAL), welches den Zugang zu weiteren Computern oder zu lokalen Treibern ermöglicht. CORBA stellt die Middleware für Netzwerkkommunikation dar. Dadurch wird Kommunikation mit externer Software geregelt, weiterhin wird die Umlegung von Kommunikation im Fall von Leitungsunterbrechungen oder einem lokalen Computerabsturz festgelegt. Es gibt bei FRANZ zwei Kontrollebenen: Über Ethernet läuft die „High Level Control“ und die Datenverarbeitung. Über die „Low Level Control“ läuft das Interlock – und Sicherheitssystem. Die Netzwerkverbindungen laufen über 1 Gb Ethernet Links, womit ein schneller Austausch auch bei lokalen Netzwerkstörungen noch möglich ist. Um bei Stromausfällen das Computersystem am Laufen zu halten, wurde im Rahmen dieser Arbeit ein „Uninterruptable Power Supply“ UPS beschafft und erfolgreich am Hochspannungsterminal getestet.