Refine
Year of publication
Document Type
- Doctoral Thesis (139) (remove)
Has Fulltext
- yes (139)
Is part of the Bibliography
- no (139)
Keywords
- Stratosphäre (4)
- Eiskeime (3)
- Meteorologie (3)
- Monsun (3)
- Schwerewellen (3)
- Anisotropie (2)
- BTEX (2)
- Belize (2)
- Boden (2)
- Caribbean (2)
Institute
- Geowissenschaften (139) (remove)
This research was conducted in the Rwenzori Region of the Western Branch, East African Rift System (EARS). The EARS is a tectonic structure extending over a length of more than 3000 km from the Afar Triple Junction, in Ethiopia, to Lake Malawi in the south. The Western Rift System is a roughly NE to ENE trending sector of the EARS, which runs along the western boundary of Uganda and the neighboring Democratic Republic of Congo (D.R.C). It stretches 2100 km from Nimule, NW on Uganda-Sudan border, extending to Lake Malawi in the SE of Africa. The unusual uplift of the Rwenzori Mountains within an extensional regime and the mechanisms associated with the high frequency of seismic activity in the region was hardly understood and therefore, had remained a subject of contention that needed to be critically addressed in detail. To my knowledge, this was probably the first study to be performed and documented in great depth within the domains of seismic noise variation, seismic anisotropy and b value analyses beneath the Rwenzori Region. After about six years of operation (2006-2012), the seismology group of the RIFTLINK Research Project (www.riftlink.org) acquired a vast amount of high-quality, digital data that were collected using a seismic network of well calibrated seismic equipment. The project was divided into two phases. Phase I, that operated between February 2006 - September 2007, consisted of thirty-two temporary seismic stations, which were selectively spread out in the Rwenzori Region on the Ugandan side, to detect and record extremely weak as well as strong naturally occurring earthquakes. The seismic equipment used included EDL and REFTEK digitizers, which were coupled with Güralp and MARK sensors respectively (REFTEKS: only short-period MARK sensors, EDLs: short-period MARK plus few broadband Güralp Sensors). Exactly 22375 earthquakes were recorded. The data were processed using the SEISAN software package. About 14413 earthquakes were carefully localized using the velocity model of Bram (1975) that implements a Vp=Vs ratio fixed at 1.74. Phase II, that extended between 2009-2012 consisted of thirty-two seismic stations, which were spread out around the Rwenzori Mountains, both on the Ugandan side and the neighboring D.R.C. Only Taurus digitizers that were coupled with Trillium sensors were used in the D.R.C. On the Ugandan side however, both EDL and Taurus digitizers, which were coupled with Trillium and Güralp sensors were used. ...
Die vorliegende Arbeit wurde im Rahmen des Forschungsprojekts „Integrierte Analyse von mobilen, organischen Fremdstoffen in Fließgewässern“ (INTAFERE) am Institut für Physische Geographie an der Goethe-Universität Frankfurt erstellt. In INTAFERE wurde das Gefährdungspotenzial von mobilen, organischen Fremdstoffen (MOF) für aquatische Ökosysteme und die natürlichen Wasserressourcen in integrierter und partizipativer Art und Weise untersucht. MOF sind chemische Substanzen, die in Alltagsprodukten enthalten sind und durch unterschiedliche Eintragsfade in unbekannten Mengen in Oberflächengewässer eingetragen werden. Problematisch sind aus Umweltgesichtspunkten ihre Eigenschaften: sie besitzen im Wasser eine hohe Mobilität und sind schwer abbaubar. Dies führt zu einer Persistenz über lange Zeiträume. Für einige dieser Substanzen wurde zudem gezeigt, dass sie in sehr geringen Konzentrationen biologisch aktiv sind und für aquatische Ökosysteme eine Gefahr darstellen. In INTAFERE wurden drei zentrale Ziele verfolgt: Charakterisierung des Problemfeldes MOF, Erzeugung von praxisrelevantem Wissen für das Management von MOF und Entwicklung einer Softwareanwendung, die gesellschaftliche Aushandlungsprozesse durch eine transparente Darstellung der Wirkungszusammenhänge im Problemfeld unterstützt. Um einen Beitrag für die Erfüllung der Ziele zu leisten, war es die Aufgabe der Verfasserin, eine Akteursanalyse und -modellierung durchzuführen sowie Zukunftsszenarien im Bereich der MOF zu entwickeln. Dafür existierte keine adäquate Methodik, daher verfolgt die Dissertation zum einen die Entwicklung einer Methodik und zum anderen deren Anwendung im Kontext des Projektes INTAFERE. Da im Forschungsprozess die Durchführung von Analysen, die wissenschaftliche und gesellschaftliche Sichtweise der Problematik sowie die Erarbeitung von praktischen Lösungen im Mittelpunkt standen, wurde eine transdisziplinäre Herangehensweise gewählt. Ziel war es, eine Methodik zu entwerfen, die sowohl eine Entwicklung von Szenarien als auch eine Modellierung von Handlungsentscheidungen umfasst. Eine Modellierung und Visualisierung von Handlungsentscheidungen ist notwendig, um Strategien für ein Umweltproblem für verschiedene Szenarien zu ermitteln, und damit einen Lernprozess der Stakeholder zu initiieren. Dies wurde mit der transdisziplinären Methode „Akteursbasierte Modellierung“ umgesetzt. Hierbei wurden insbesondere Aspekte der Problemwahrnehmung von Akteuren und deren Darstellung, der partizipativen Szenarienentwicklung sowie der semi-quantitativen Modellierung von Handlungsentscheidungen berücksichtigt. Die Verfasserin hat mit der semi-quantitativen akteursbasierten Modellierung eine Methode erarbeitet und getestet, die bisher unverbundene Komponenten (wie die Software Dynamic Actor Network Analysis (DANA) und die Szenarienentwicklung) zusammenführt. Um Handlungsentscheidungen unter verschiedenen Szenarien zu modellieren hat die Autorin eine sequentielle Modellierung entwickelt, die mit der Software DANA durchgeführt werden kann. Die dafür notwendige Weiterentwicklung von DANA wurde von Dr. Pieter Bots (TU Delft) umgesetzt. Die akteursbasierte Modellierung läuft in drei methodischen Schritten ab: 1. Modellierung von Akteurs-Sichtweisen in Form von Wahrnehmungsgraphen und deren Analyse, aufbauend auf Ergebnissen von qualitativen, leitfaden-gestützten Expertengesprächen (= Akteursmodellierung), 2. partizipative Szenarienentwicklung mit den Akteuren und 3. Zusammenführung der Ergebnisse der Akteursmodellierung und der Szenarienentwicklung und darauf aufbauend eine sequentielle Modellierung von Handlungsentscheidungen und deren Auswirkungen auf Schlüsselfaktoren. Im Zuge der Anwendung auf das Problemfeld der MOF wurde für folgende Akteure jeweils ein Wahrnehmungsgraph modelliert: Obere Wasserbehörde, Umweltbundesamt, Umwelt- und Verbraucherschutzorganisationen, Wasserversorger sowie für die Hersteller von verschiedenen MOF, weiterhin für die European Flame Retardants Association und die Weiterverarbeitende Industrie. Das Ergebnis der Szenarienentwicklung waren vier Szenarien: ein Gesundheitsszenario, unter der Annahme von hohen lokalen Umweltstandards durch nachhaltigkeitsorientierte KonsumentInnen, ein Umweltszenario, in dem eine starke Regulierung und nachhaltigkeitsorientierter Konsum Hand in Hand gehen, ein Globalisierungsszenario, in dem Wirtschaftsmacht und preisbewusste KonsumentInnen statt staatliche Regulierung vorherrschen und ein Technikszenario, unter der Annahme, dass Kläranlagen, bedingt durch eine starke Regulierung, aufgerüstet werden. Bei der Modellierung von Handlungsentscheidungen wurden die Wahrnehmungsgraphen und die vier Szenarien miteinander verknüpft. Pro Substanz wurde ein Modell entwickelt, welches die wichtigsten Systemkomponenten in einer angemessenen Komplexität umfasst und die von den Akteuren gemeinsam getragene Einschätzung der Wirkungsbeziehungen darstellt. Insgesamt wurden 16 Modelle entwickelt. Basierend auf den simulierten Akteurshandlungen wurden relativen Veränderungen der Schlüsselfaktoren Produktion, Import und Leistungsfähigkeit der Kläranlagen für die vier genannten Szenarien berechnet. In Zusammenarbeit mit Pieter Bots konnten algorithmische Beiträge zur Analyse- und Modellierungssoftware DANA getestet und verbessert werden. Da keine vollständige und zugleich leicht verständliche Einführung zu DANA vorlag, wurde für Nutzer im Rahmen dieser Dissertation eine Anleitung verfasst, die die Modellierung von Wahrnehmungsgraphen und deren Analyse sowie alle Schritte der akteursbasierten Modellierung mit DANA erläutert.
In dieser Arbeit werden Schmelz- und Anreicherungsprozesse des Erdmantels, sowie Kristallisationsereignisse der Erdkruste zweier ausgewählter Gebiete in Namibia und Spanien mithilfe geochemischer Methoden rekonstruiert und in einen zeitlichen Zusammenhang gebracht. Ein Vergleich der gewonnenen Ergebnisse beider Kompartimente soll dabei weitere Informationen liefern inwieweit Prozesse des Erdmantels und der Erdkruste miteinander verknüpft waren. Insbesondere soll ein weitere Beitrag zur aktuellen Diskussion geliefert werden, bei der sich das sogenannte „pulsed growth“ und „steady accumulation“ Modell gegenüberstehen (siehe Zusammenstellung Pearson et al., 2007). Zudem tragen die neu gewonnenen Daten dazu bei, die regionalen geologischen Gegebenheiten im besonderen Hinblick auf die geotektonische Geschichte besser zu verstehen.
Das Gibeon Kimberlit Feld befindet sich in der tektonischen Einheit des Rehoboth Terranes in Namibia und ist gekennzeichnet von Vulkanismus vor etwa 72.5 Ma (Davies et al., 2001), der Granat Peridotite und krustale Xenolithe mit an die Oberfläche beförderte. Eine klare Einordnung des Rehoboth Terranes in die Gesamtheit des Süd Afrikanischen Plattenverbunds ist noch nicht vollständig geklärt.
Die Südöstliche vulkanische Provinz in Spanien (SEVP) mit besonderem Hinblick auf die Region um Casas de Tallante stellt das zweite Probengebiet für diese Arbeit dar. Vor etwa 2.6 Ma (Bellon et al., 1983) kam es zur Extrusion von alkali-basaltischen Schmelzen, die zahlreiche Spinell / Plagioklas Peridotite mit sich brachten. Tufflagen, sowie die Matrix der Basalte ermöglichen einen Einblick in die untere Kruste der Region.
Untersuchungen der Erdmantelproben aus Namibia auf ihre Haupt- und Spurenelementchemie, sowie Lu-Hf und Sm-Nd Isotopie zeigten, dass zwei verschiedene Manteltypen vorliegen („N“ und „σ“ Typ), die zu einem Zeitpunkt um etwa 850 Ma („N“) und 1.9 Ga („σ“) angereichert wurden. Eine letzte Anreicherung beider Typen fand vermutlich während der Pan–Afrikanischen Orogenese um etwa 450 Ma statt. Die Reinterpretation eines zuvor publizierten Datensatzes (Pearson et al., 2004), suggeriert, dass es zu einer ersten Verarmung der σ Peridotite um etwa 2.9 Ga kam.
Untersuchungen der U-Pb und Hf Isotopie an Zirkonen aus der unteren Kruste des Probengebiets in Namibia ergaben, dass es zur Bildung von juvenilem Krustenmaterial vermutlich bereits im Archaikum kam (wie bereits vorgeschlagen durch z.B. Hoal et al., 1995; Franz et al., 1996), sowie in den Zeiträumen von 2.3 bis 2.7 und 1.5 bis 1.6 Ga, mit jeweils anschließendem krustalem Recycling und Krustenmischung. Eine Übereinstimmung von Mantel- und Krustenevents konnte für die Zeiträume von etwa 1.8, 0.8 - 0.9 Ga und 0.4 – 0.5 Ga gefunden werden. Eine mögliche erste Verarmung des σ Mantels wird bestätigt durch Zirkonalter im Bereich von 2.7 bis 2.9 Ga.
Die Analyse ausgewählter Spinell / Plagioklas Peridotite aus der SEVP, ergaben, dass ein heterogener Mantel mit mindestens 3 verschiedenen Typen vorliegt. Eine Korrelation der Lu-Hf Isotopie von 3 Proben dieses Probensatzes, sowie den Hf Isotopien einer weiteren Probe von Bianchini et al. (2011) suggerieren, dass es eventuell zu einem Verarmungsereignis zu einem Zeitpunkt von etwa 550 Ma kam. Sr Isotopien von Klinopyroxenen und Plagioklasen im Vergleich ergaben, dass die Sr Isotopie der Plagioklase, im Gegensatz zu den Klinopyroxenen, von denen der Alkali Basalte überprägt wurden.
Zirkonanalysen aus Lokalitäten innerhalb der SEVP (U-Pb, Hf) ergaben ein weitreichendes Altersspektrum, beginnend bei etwa 2-3 Ma bis hin ins Archaikum (2.7 bis 2.9 Ga) mit Provenance Ursprung aus Gondwana und dem Arabisch-Nubischen Schild. Die Kombination der U-Pb Altersinformationen mit den entsprechenden Hf Isotopien, zeigten, dass es vermutlich bereits im Archaikum zu juveniler Krustenbildung kam. Zirkone > 100 µm datieren den Zeitpunkt der Eruption der Alkali Basalte mit Altern um etwa 2.6 Ma und Hf Isotopien, die einem leicht verarmten Mantel entsprechen. Ein mögliches Verarmungsereignis im Erdmantel zu einem Zeitpunkt von etwa 550 Ma, ist im Einklang mit Krustenrecycling zu selbigem Zeitpunkt.
Die neugewonnenen Daten dieser Arbeit unterstützten das „pulsed growth“ Modell.
Literatur
Bellon, H., Bordet, P. and Montenat, C., 1983. Chronology of the Neogene Magmatism from Betic Ranges (Southern Spain). Bulletin De La Societe Geologique De France, 25(2): 205-217.
Bianchini, G., Beccaluva, L., Nowell, G.M., Pearson, D.G. and Siena, F., 2011. Mantle xenoliths from Tallante (Betic Cordillera): Insights into the multi-stage evolution of the south Iberian lithosphere. Lithos, 124(3-4): 308-318.
Davies, G.R., Spriggs, A.J. and Nixon, P.H., 2001. A non-cognate origin for the Gibeon kimberlite megacryst suite, Namibia: Implications for the origin of Namibian kimberlites. Journal of Petrology, 42(1): 159-172.
Franz, L., Brey, G.P. and Okrusch, M., 1996b. Steady state geotherm, thermal disturbances, and tectonic development of the lower lithosphere underneath the Gibeon Kimberlite Province, Namibia. Contributions to Mineralogy and Petrology, 126(1-2): 181-198.
Hoal, B.G., Hoal, K.E.O., Boyd, F.R. and Pearson, D.G., 1995. Age constraints on crustal and mantle lithosphere beneath the Gibeon kimberlite field, Namibia. South African Journal of Geology, 98(2): 112-118.
Pearson, D.G., Irvine, G.J., Ionov, D.A., Boyd, F.R. and Dreibus, G.E., 2004. Re-Os isotope systematics and platinum group element fractionation during mantle melt extraction: a study of massif and xenolith peridotite suites. Chemical Geology, 208(1-4): 29-59.
Pearson, D.G., Parman, S.W. and Nowell, G.M., 2007. A link between large mantle melting events and continent growth seen in osmium isotopes. Nature, 449(7159): 202-205.
Die Wechselwirkung zwischen zwei verschiedenartigen Wellenphänomenen in einer Höhe von ca. 10 bis 100 km, der mittleren Atmosphäre, ist das zentrale Thema der vorliegenden Arbeit. Schwerewellen entstehen durch Oszillationen der Luft in einer stabil geschichteten Atmosphäre. Durch die Vielzahl von Schwerewellen-Paketen, die in der Troposphäre durch Gebirge, Gewitter, Fronten und andere dynamische Prozesse angeregt werden, wird Energie und Impuls in die mittleren Atmosphäre transportiert. Durch den turbulenten Zerfall von brechenden Schwerewellen wird auf die mittlere Strömung eine Kraft ausgeübt, welche im Bereich der Mesopause bei ca. 90 km maximal wird. Daraus resultiert die sogenannte interhemispherische residuelle Zirkulation, die in der Mesosphäre den Sommer- mit dem Winterpol verbindet und die beeindruckend kalte Sommer-Mesopause mit Temperaturen von unter −140°C verursacht. Thermische Gezeiten sind ein weiterer wichtiger Teil in der Dynamik der mittleren Atmosphäre. Sie werden durch die Erwärmung der Tagseite der Erde angeregt und sind globale Schwingungen mit Perioden von 24 Stunden und harmonischen Vielfachen. Mit Wind- und Temperatur-Amplituden von bis zu 50 m/s und 30 K dominieren sie die Tagesvariabilität im Mesopausen-Bereich.
In der Mesosphäre wird die Wechselwirkung zwischen Schwerewellen und thermischen Gezeiten wichtig. Dort wird durch die Gezeitenwinde das Brechen von Schwerewellen zeitlich moduliert und eine periodische Kraft erzeugt, welche auf die Gezeiten rückwirkt. Doch selbst unter Zuhilfenahme modernster Hochleistungsrechner kann in komplexen Zirkulationsmodellen nur ein Bruchteil des turbulenten sowie des Wellen-Spektrums aufgelöst werden. Der Effekt der nichtaufgelösten Skalen, wie Turbulenz und Schwerewellen, muss somit in effizienter Weise parametrisiert werden. Üblicherweise wird in Schwerewellen-Parametrisierungen die horizontale und zeitliche Variation des Hintergrundmediums vernachlässigt. Es entsteht eine vertikale Säule, in der sich stationäre Schwerewellen-Züge instantan nach oben ausbreiten. Es ist jedoch äußerst fraglich, inwieweit eine solche Beschreibung, auf der ein Großteil früherer Untersuchungen basiert, für das Ergründen der Schwerewellen-Gezeiten-Wechselwirkung hinreicht. Für diese Arbeit wurde deswegen das Ziel gesetzt, die Defizite der konventionellen Beschreibung der Schwerewellen-Ausbreitung in realistischen Gezeiten zu quantifizieren.
Die "Ray Tracing"-Methode wird auf die Problemstellung der Schwerewellen-Gezeiten-Wechselwirkung angewendet. In der "Ray Tracing"-Methode werden Schwerewellen-Pakete entlang ihrer Ausbreitungspfade explizit verfolgt und Veränderungen der Schwerewellen-Eigenschaften durch den Einfluss der Hintergrundströmung berücksichtigt. Vom Autor wurde das globale "Ray Tracing"-Modell RAPAGI (RAy PArameterization of Gravity-wave Impacts) entwickelt und mit realistischen Gezeitenfeldern aus dem Zirkulationsmodell HAMMONIA (HAmburg MOdel of the Neutral and Ionized Atmosphere) betrieben. In verschiedenen "Ray Tracing"-Experimenten wird für ein einfaches Schwerewellen-Ensemble gezeigt, wie horizontale Gradienten des Hintergrundmediums sowie dessen Zeitabhängigkeit wesentlichen Einfluss auf die Ausbreitung und Dissipation von Schwerewellen nehmen. Zum einen führt die durch Gezeitenwellen hervorgerufene Transienz zu einer tageszeitlichen Modulation der absoluten Schwerewellen-Frequenz.
Die dadurch induzierten Variationen der horizontalen Phasengeschwindigkeit der Schwerewellen können die anfängliche Phasengeschwindigkeit um bis zu eine Größenordnung übertreffen und folgen dem Verlauf des Hintergrundwindes. Die kritische Filterung von Schwerewellen wird durch diese Modulation abgeschwächt, was im Vergleich zu konventionellen Schwerewellen-Parametrisierungen zu einer im Mittel um 30 % geringeren Kraftwirkung auf die Gezeiten führt. Zum anderen werden durch horizontale Gradienten in der gesamten Hintergrundströmung Schwerewellen-Pakete horizontal abgelenkt. Wellen, die gegen die Hintergrundströmung laufen, werden in der Stratosphäre in die Maxima der Wind-Jets hineingeführt. Durch dieses Verhalten wird analog zum Fermatschen Prinzip der geometrischen Optik die Laufzeit der Schwerewellen in der mittleren Atmosphäre minimiert. Es entsteht eine Fokussierung von Schwerewellen-Feldern, bei gleichzeitiger Zunahme der horizontalen Wellenzahl in den Experimenten im Mittel um ca. 10 %. Dadurch reduziert sich der Schwerewellen-Impulsfluss und die mittlere und ebenfalls die periodische Kraft auf die Hintergrundströmung im Mittel um weitere 20 % bis 30 %. Konventionelle Schwerewellen-Parametrisierungen scheinen somit die Kraftwirkung von brechenden Schwerewellen zu uberschätzen. Aus den Ergebnissen der Arbeit wird klar, dass Schwerewellen-Parametrisierungen nicht "blind" für jede Untersuchung genutzt werden können. Alle Annahmen und Näherungen in Parametrisierungen müssen je nach Zielstellung neu getestet werden.
Occurrence and sources of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD) in the aquatic environment
(2011)
The aim of the present study was to identify the sources of 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD) into the aquatic environment and to investigate its occurrence in rivers and wastewater treatment plants (WWTPs). Therefore, TMDD was analyzed in 441 wastewater samples from influents and effluents of 27 municipal WWTPs, in 6 sludge samples, in 52 wastewater samples from 3 sewage systems of municipal WWTPs, in 489 surface samples from 24 rivers, in 9 wastewater samples of 3 paper-recycling industries and in 65 groundwater samples. TMDD was also analyzed in household paper products, in 23 samples of toilet
papers, in 5 types of paper towels and in 12 types of paper tissues. The samples were collected between 2007 and 2011. The water samples were extracted with solid phase extraction (SPE) and the household paper samples with Soxhlet extraction. Gas chromatography-mass spectrometry (GC-MS) was used for quantification purposes. Between November 2007 and January 2008, TMDD was detected in the river Rhine at Worms with permanent high concentrations (up to 1330 ng/L). The results showed that TMDD is uniformly distributed across the river at Worms. An increase of the mean TMDD concentration from approximately 500 ng/L to 1000 ng/L was registered in January 2008. Due to the minor fluctuations of the TMDD concentration during the sampling period it is expected that the input of TMDD into the river is continuous. Therefore, TMDD might rather originate from effluents of municipal WWTPs than from temporal sources. The mean TMDD load based on the analysis of 147 water samples collected in the River Rhine was 62.8 kg/d which is equivalent to 23 t/a suggesting that TMDD must be used and/or produced in high quantities in order to be found in those high concentrations. To determine if TMDD is discharged by effluents of municipal WWTPs into the rivers, 24 hours influent and effluent samples of four municipal WWTPs in the Frankfurt/Rhine-Main metropolitan region were collected during November 2008 and February 2010 and analyzed for TMDD. The TMDD influent concentrations varied between 134 ng/L and 5846 ng/L and the effluent concentrations between <LOQ (limit of quantitation) and 3539 ng/L. The TMDD elimination rates in the four WWTPs varied between 33% and 68%. The results showed that effluents of municipal WWTPs are an important source of TMDD in the aquatic environment because TMDD is not completely removed from the sewage during the wastewater treatment. Weekly and daily variations of the TMDD concentration in the influents of two municipal WWTPs indicated that both private households and indirect industrial dischargers contribute to the introduction of TMDD into the municipal sewage systems. A more detailed study of the TMDD elimination rate in the different wastewater treatment stages was carried out in the WWTP Niederrad/Griesheim in Frankfurt am Main. The results showed that the removal of TMDD is mainly carried out during the aerobic biological treatments, where the elimination rate was 46%. In contrast, during the anoxic treatment the removal efficiency was only 1.4% and during the mechanical treatment the elimination rate was 19%. To determine the sources of TMDD in the sewage, household paper products (paper tissues, toilet papers and paper towels) were analyzed for TMDD using Soxhlet extraction. TMDD was detected in 83% of the samples (n=40). The highest mean TMDD concentrations were found in recycled toilet paper (0.20 μg/g) and in paper towels (0.11 μg/g). In paper tissues and non-recycled toilet paper the mean TMDD concentrations were lower 0.080 μg/g and 0.025 μg/g respectively. According to these results the high TMDD influent concentrations found previously in municipal WWTPs (mean 1.20 μg/L) cannot be explained due to migration of TMDD from the household paper products into the sewage. Thus indirect industrial dischargers are the cause of the high influent TMDD concentrations. Effluents of municipal WWTPs with different indirect industrial dischargers (textile-, metal processing-, food processing-, electroplating-, paper-recycling- and printing ink factories) were analyzed. The highest mean TMDD concentrations were found in the effluents of municipal WWTPs that have paper-recycling (71.3 μg/L) and printing ink factories (138 μg/L) as indirect industrial dischargers. These results were confirmed by analyzing process wastewater of three paper-recycling factories located in Germany. High TMDD concentrations were detected and fluctuated between 1.83 μg/L and 113 μg/L. TMDD was also analyzed in the wastewater of a non-recycling-paper factory but its concentration was much lower (0.066 μg/L) indicating that TMDD is introduced into the processing water during the papermaking process due to the use of waste paper. Analyses of wastewater samples from different parts of the sewage pipes of a municipal WWTP in Hesse, which receives the wastewater from a printing ink factory, were carried out. The TMDD concentration in the wastewater sample from the sewage pipe of the printing ink factory was much higher (3,300 μg/L) than the TMDD concentration detected in the other wastewater samples from the sewage system (0.030 μg/L – 0.89 g/L). These results confirm the printing ink production as one of the principal sources of TMDD in the sewage. Analysis of surface water samples of the River Modau downstream from the effluent of the WWTP Nieder-Ramstadt showed TMDD concentrations of up to 28.0 μg/L. These high TMDD concentrations might be caused by the indirect wastewater discharges of a paint factory connected to the municipal sewage system. These results indicate that TMDD is introduced into the municipal WWTPs principally by indirect industrial dischargers and they are mainly paint and printing ink factories. The paper-recycling factories also represent an important source of TMDD in municipal WWTPs but indirectly. According to statements given by the representatives of two paper recycling factories neither TMDD or any other TMDD containing product is used or added during the papermaking process. Therefore, TMDD is washed out from the printing inks of the coloured waste paper and concentrated in the process wastewater in the closed water circuits of paper-recycling factories reaching rivers and municipal WWTPs. The occurrence and distribution of TMDD in surface waters in Germany was also studied. The results showed that TMDD is widely distributed across different rivers systems in the federal states of Hesse, North-Rhine-Westphalia, Bavaria, Baden-Wuerttemberg and Rhineland-Palatinate. In Hesse, TMDD was detected in the some of main rivers with mean concentrations of 812 ng/L (Schwarzbach, Hessian Ried), 374 ng/L (Kinzig), 393 ng/L (Main, at Frankfurt), 539 ng/L (Werra), 326 ng/L (Fulda), 151 ng/L (Emsbach) and 161 ng/L (Nidda). In small rivers (creeks) the mean TMDD concentrations varied between <LOQ (Diemel, Urselbach) and 1890 ng/L (Darmbach). The results showed that the TMDD concentrations in creeks are highly influenced by both effluents of WWTPs and by the distance between the sampling point and the nearest WWTP. Surface samples from sampling locations downstream from WWTPs dischargers showed higher TMDD concentrations (mean 518 ng/L) than sampling locations upstream from WWTPs dischargers (mean 35.1 ng/L). The behavior of TMDD during bank filtration was investigated at two locations, at a water utility company at the Lower River Rhine (urban area) and at the Oderbruch polder (rural area). The results indicated that TMDD is removed from the surface water by bank filtration at both sampling locations. The removal process is probably carried out in the first meters of the aquifer (hyporheic zone) by biodegradation processes, since TMDD does not tend to be absorbed by sediments and it was not found in the groundwater of monitoring wells. In groundwater samples from the Hessian Ried (n=23) TMDD was found only in five samples and the highest TMDD concentration was 135 ng/L. According to these results, TMDD does not represent a concern for drinking water in Germany, since it does not reach the groundwater with high concentrations and it has a low toxicity potential. The input of TMDD into the North Sea was estimated to be 60.7 t/a by considering the mean transported loads of TMDD by the River Rhine at Wesel (58.3 t/a) and Meuse in the Netherlands (2.40 t/a). The estimated discharge of TMDD by German municipal WWTPs (8.19 t/a) and paper-recycling factories (9.24 t/a) into rivers seems to be too low considering that the mean TMDD load in the River Rhine downstream from Wesel is 58.3 t/a. However, due to the high density of population and industries at the Lower Rhine it is expected that more relevant sources of TMDD are located along the Rhine River increasing the transported load. According to the results of this PhD project TMDD is a non-ionic surfactant contained in products, which are applied on surfaces (printing inks and paints) and has the potential to reach the aquatic environment. Therefore, TMDD should fulfill the requirement of a biodegradability of 80% established by the “Law on the Environmental Impact of Detergents and Cleaning Products” in Germany. However, due to the partial elimination rates of TMDD obtained in municipal WWTPs (between 33% and 68%) and to the absence of information about the execution of the biodegradation test on TMDD, it is unknown if TMDD is in accordance with this law. Otherwise, its use as surfactant in such products is questionable.
The aim of this study is a better understanding of radiation processes in regional climate models (RCMs) in order to quantify their impact and to reduce possible errors. A first important task in finding an answer to this question was to examine the accuracy of the components of the radiation budget in regional climate simulations. To this end, the simulated radiation budgets of two regional climate simulations for Europe were compared with a satellite-based reference. In the simulations with the RCM COSMO-CLM there were some serious under- and overestimations of short- and long-wave net radiation in Europe. However, taking into account the differences in the reference datasets, the results of the COSMO-CLM were quite satisfactory.
Using statistical methods, the influence of potential sources of uncertainties was estimated. Uncertainties in the cloud cover and surface albedo had a significant impact on uncertainties in short-wave net radiation, the explained variance of uncertainties in cloud cover was two to three times higher than that of uncertainties in surface albedo. Uncertainties in the cloud cover resulted in significant errors in the net long-wave radiation. However, the influence of uncertainties in soil temperature on errors in the long-wave radiation budget was low or even negligible. These results were confirmed in a comparison with simulations of the REMO and ALADIN regional climate models. It is reasonable to expect that a better parameterization of relatively simple parameters such as cloud cover and surface albedo is a means of significantly improving the simulation of radiation budget components in the COSMO-CLM.
An important question for the application of RCMs is to examine whether the results of radiation uncertainties and their impact factors are comparable if the model is applied in a region that is not the one for which it was originally created. Comparisons of the simulated radiation budgets of different RCMs for West Africa showed that problems in the simulation of short- and long-wave radiation fluxes were a widespread problem. Most of the tested models showed some considerable under- or overestimation of the short- and long-wave radiation fluxes.
Similar to Europe uncertainties in cloud cover were also in the simulations for Africa a significant factor affecting uncertainties in the simulated radiation fluxes. However, for the African simulations uncertainties in the parameterization of surface albedo were much more important than in Europe. On average, overland uncertainties in the cloud cover and surface albedo were of similar importance. Uncertainties in soil temperature simulations were of higher importance in Africa, and reached overland similar values of the mean explained variance (R2 ≈ 0.2) such as uncertainties in the cloud cover. This indicates a geographical dependence of the model error. This study confirmed the assumption that an improved parameterization of relatively simple parameters such as the surface albedo in RCMs leads to a significant improvement in the modeled radiation budget, particularly in Africa.
The influence of errors in the simulated radiation budget components on the simulation of climate processes, such as the West-African monsoon (WAM), was investigated in a next step. The evaluation of ERA-Interim and ECHAM5 driven COSMO-CLM simulations for Africa showed that the main features of the WAM were well reproduced by the model, but there were only slight improvements compared to the driving data. The index of convective activity in the model simulations was much too high and precipitation was underestimated in large parts of tropical Africa. The partly considerable differences between the ERA-Interim and ECHAM5 driven simulations demonstrated the sensitivity of the RCM to the boundary conditions and in particular to the sea surface temperature. An excessive northwards shift of the monsoon in the model was influenced by the land-sea temperature gradient and the strength of the Saharan heat low. Consequently, a part of the error was due to the driving data and the model itself produced another part.
By modifying the parameterization of the bare soil albedo the errors in the radiation budget and 2 m temperature in the Sahara region were significantly reduced. Similarly, the overesti-mation of precipitation and convection has been reduced in the Sahel. The effect of this modifi-cation on the examined WAM area was low. This confirmed that especially in desert regions, errors in the surface albedo were a driving factor for errors in the radiation budget. However, there are other important factors not yet sufficiently understood that have a strong influence on the quality of the simulation of the WAM.
The analysis of the actual state, the quantification of error sources and the highlighting of connections made it possible to find means to reduce uncertainties in the simulated radiation in RCMs and to have a better understanding of radiation processes. However, the magnitude of the errors found, the number of possible influencing factors, and the complexity of interactions, indicate that there is still a need for further research in this area.
Owing to long-term similarities with regard to orbital climate forcing (i.e., low eccentricity and a dampened influence of precession), Marine Isotope Stage (MIS) 11 represents one of the closest astronomical analogues for present and future climate. Hence, insights into the climate variability of MIS 11 can contribute to a better understanding of the climatic evolution of the present (Holocene) interglacial as it would occur without human interference. In order to elucidate the natural climate variability during MIS 11, this study examines predominantly annually laminated lake sediments of Holsteinian age from Dethlingen, northern Germany. The Holsteinian interglacial is widely accepted to be the terrestrial equivalent of MIS 11c in central Europe and can be biostratigraphically correlated with the Hoxnian, Mazovian and Praclaux interglacials on the British Isles, in Poland and in France, respectively. These correlations yield the potential to cross-check the results from individual sites on a regional scale. This study is based on a multi-proxy approach including palynological, micropaleontological, sedimentological, geochemical and time series analyses within a wellconstrained chronological framework that has been established through varve counting and regional bio-stratigraphic correlations with other annually laminated archives of Holsteinian age. In particular, the here-presented study aims at (i) fingerprinting the long-term (centennial- to millennial-scale) and short-term (sub-decadal- to decadal-scale) climate variability during the Holsteinian interglacial, (ii) deciphering the nature, tempo and trigger mechanisms of abrupt climate change under interglacial boundary conditions, and (iii) assessing its impact on terrestrial ecosystems. With regard to long-term climate variability, the vegetation succession at Dethlingen as inferred from pollen data provides insights into the mesocratic to telocratic forest phases of a glacial-interglacial cycle spanning ~11500 (± 1000) years of the 15-16-ka-long Holsteinian interglacial. The development of temperate mixed forests suggests a general prevalence of mild climatic conditions during the Holsteinian. The older parts of the interglacial are characterised by the strong presence of boreal tree taxa (e.g., Picea), whereas the younger parts of the interglacial are marked by the expansion of sub-Atlantic to Atlantic forest elements (e.g., Abies, Buxus, Ilex, Quercus) and the decline of boreal tree taxa. This vegetation succession suggests a general warming trend and decreasing seasonality over the course of the Holsteinian interglacial. Based on the maximum pollen abundances of indicator tree taxa (e.g., Buxus and Quercus), peak warmth was reached during the later stages of the interglacial; it was accompanied by high humidity. The forest succession of the Holsteinian interglacial was punctuated by abrupt and gradual changes in the abundances of temperate plant taxa. These vegetation changes indicate considerable intra-interglacial climate variability. In particular, two marked declines of temperate taxa leading to the transient development of boreal and sub-boreal forests were triggered by centennial-scale climate oscillations, here termed Older and Younger Holsteinian Oscillations (OHO and YHO). These oscillations occurred ~6000 and ~9000 years after the onset of the interglacial pioneer forestation in central Europe, respectively. To assess the impact of abrupt climate change on terrestrial ecosystems during the Holsteinian and to investigate the underlying driving mechanisms, the intervals spanning the OHO and the YHO at Dethlingen were subjected to decadal-scale palynological and sedimentological analyses. Based on these data, the OHO comprises a 90-year-long decline of temperate taxa associated with expansion of Pinus and non-arboreal pollen, and a subsequent 130-year-long recovery of temperate taxa marked by the pioneer expansion of Betula and Alnus. Owing to its highly characteristic imprint on vegetation dynamics, the OHO can be identified in pollen records from the central European lowlands north of 50º latitude, from the British Isles to Poland. A close inspection of individual pollen records from that region reveals the prevalence of colder winters during the OHO, with a gradient of decreasing temperature and moisture availability, and increased continentality towards eastern Europe. This climate pattern points to a weakened influence of the westerlies and/or stronger influence of the Siberian High connected to the OHO. The vegetation dynamics during the YHO are characterised by a decline of temperate taxa (particularly of Carpinus) and the expansion of pioneer trees (mainly Betula). In contrast to the OHO, frost-sensitive taxa (e.g., Ilex, Buxus and Hedera) continued to thrive. This suggests that mean winter temperatures remained relatively high (>0 ºC) during the YHO pointing to a decrease of summer warmth related to the climatic deterioration. The YHO, which has a duration on the order of 300 years, is centered within a long-term (~1500-year) decline and subsequent, millennial-scale recovery of temperate taxa. Because the impact of the OHO and the YHO on the vegetation at Dethlingen was markedly different, both short-term climate oscillations may have been caused by different trigger mechanisms. For the OHO, the inferred regional-scale winter cooling over central Europe lasting for several decades points to a decrease in ocean heat transport, most likely related to a transient slowdown in North Atlantic Deep Water formation. This view is supported by the strong resemblance of the OHO to the 8.2 ka event of the Holocene with regard to the duration, imprint on terrestrial ecosystems, spatial pattern of the climatic impact, timing within the respective interglacial, and prevailing interglacial boundary conditions. In contrast, the presence of frost-sensitive taxa during the YHO appears to exclude a reduction in oceanic heat transport as postulated for the OHO. Instead, the long-lasting, gradual changes in the abundances of temperate taxa suggest a connection to orbital forcing, with the triggering mechanism causing the centennial-scale vegetation setback itself remaining unclear. The characteristics of short-term climate variability were investigated based on microfacies and time series analyses of a ~3200-year-long, annually laminated window of the Dethlingen record. The annual laminations at Dethlingen comprise biogenic varves consisting of two discrete sub-layers. The light layers, which are controlled by the intensity of diatoms blooms during spring/summer, reflect changes in the productivity of the Dethlingen palaeolake. In contrast, the dark layers, which consist predominantly of amorphous organic matter and fragmented diatom frustules, represent sediment deposition during autumn/winter. Spectral analyses of the thicknesses of the light and dark layers have revealed several peaks exceeding the 95% and 99% confidence levels that are near-identical to those known from modern instrumental data and Holocene records. Decadal-scale signals at periods of 90, 25, and 10.5 years are likely associated with the 88-, 22- and 11-year solar cycles; hence, solar activity appears to have been a forcing agent in productivity changes of the Dethlingen palaeolake. Sub-decadal-scale signals at periods between 3 and 5 years and ~6 years may reflect an influence of the El Niño-Southern Oscillation (ENSO) and the North Atlantic Oscillation (NAO) on varve formation during winter.
The Alborz Mountains are forming a ~100 km wide, E-W trending mountain chain where individual summits are up to 5000 m in elevation. The Alborz Mountains range are part of the Alpine orogen and are straddling a 2000 km wide area S of the Caspian Sea. The rocks of the Alborz Mountains consist of Neogen sediments, which are affected by folding and faulting. In the western part of the Alborz Mountains the folds and faults are trending NW-SE, whereas in the eastern part they are trending NE-SW. GPS data confirm N-S shortening including dextral strike-slip along ESE-WNW trending faults, and sinistral strike-slip along ENE-WSW trending faults. The present thesis is focusing on the active Garmsar salt nappe, the fragmented roof of which is pierced by rock salt which extruded near the front of the Alborz Mountains Range. During the past 5 m.y. the front of the Alborz chain migrated towards SSW on top of the salt of the Garmsar basin. The salt was squeezed towards SSW and took place at the Great Kavir. The extruded salt is forming the Eyvanekey plateau between the cities of Eyvanekey and Garmsar. Both the Garmsar salt nappe and the Eyvanekey plateau are dextrally displaced for ca. 9 km along the Zirab-Garmsar fault. Structural analyses of the Garmsar salt nappe indicate three different groups of joints which are trending perpendicular and parallel to the local mechanical anisotropy. The folds of the study area are congruent (type 2 and 3 after Ramsay) resulting from viscose inhomogeneous flow. InSAR-Investigations suggest the Alborz Mountains to be lifted up by ca. 1 cm/a, while horizontal shortening is active at a rate of 8 ±2 mm/a. These values are consistent with GPS data. Based on nine „Advanced Synthetic Aperture Radar“ (ASAR) scenarios, produced by the ENVISAT satellite of the European space agency between 2003 and 2006, we used interferograms to map the displacement via 22 increments during 2 – 18 months. The results suggest that the topographic height of the surface of the salt is changing at a rate which is controlled by the season. The displacement ranges from subsidence at -40 to -50 mm/a to uplift of 20 mm/a. In order to investigate the time-dependent deformation with high spatial resolution, we used algorithms which are based on data of small base lines (SBAS). The resulting interferometric SAR time series analyses also suggest that the study area is largely subsiding at a rate that is controlled by the seasons. The map with the averaged LOS deformation velocities, on the other hand, suggests the subsidence to increase from the upper part of the salt nappe towards deeper topographic 5 levels of the agricultural lowlands. The major part of subsidence is probably caused by the annual rainfall which results in subrosion of salt. The spatial changes in the subsidence rate are probably controlled by the distribution of fountains, mining activity at the margin of the salt glacier, and faults and fractures inside the salt. Striking seasonal imprints are obvious along the agricultural areas which are surrounding the Garmsar salt nappe. These areas are rapidly subsiding in summer and spring when groundwater is used for irrigations. The maximum rate of subsidence (40-50 mm/a) is located E and W of the Eyvanekey plateau, where large areas are irrigated. The maximum displacement is 20 mm/a in the farmland and 5 mm/a in the center of the salt nappe. Depth estimates using Euler deconvolution method for gravimetric and magnetic data suggest the salt to extrude from a depth less than ca. 2000 m. The gravity field of the study area is characterized by strong anomalies in the SW and weak anomalies in the NE. A considerable negative anomaly in the N indicates that the northern part subsided, whereas the southern part was lifted up. The seismic data show three major horizons inside the Miocene sediments: the Lower Red Formation, the Qom Formation, and the Upper Red Formation. The western part of the study area seems to be free from salt domes. The layers of the upper part of the Qom Formation show thinning along the NE and NW trending faults. In some areas the seismic reflectors indicate steep faults close the saddle of the folds. NE-SW-, NW-SE and E-Wtrending faults prevail. Analogue experiments have been carried out to extend our knowledge about the evolution of the Garmsar salt dome. We used a scaled model (34 cm * 25 cm * 2.5 cm) that was shortened perpendicular to its long side. The wedge shape of the Alborz Mountains was simulated by a wedge consisting of Styrofoam. Rock salt was simulated using Polydimethylsiloxan (PDMS), a linear viscous material with a viscosity of 2.3*104 Pa s and a density of 0.96 g/cm3 at room temperature. Other sediments were modeled using dry quartz sand. The experimental results can be used to simulate the structural evolution of the study area: The Alborz deformation front was emplaced on top of the salt rocks in the Garmsar area while migrating towards SSW. A salt basin and a salt extrusion have also been produced in the model. Cross sections through the wedge shaped analogue model indicate N- and S-dipping reverse faults, which are in line with the wedge shape of the Alborz chain. Moreover, ENE-WSW trending sinistral and ESE-WNW trending dextral strike-slip faults led to N-S shortening during the Miocene. Structural marker horizons, 6 which have been turned into Z-folds on the western fold limbs and to S-folds on the eastern fold limbs, are comparable with the folds of the study area. Solving the problem of waste is one of the central tasks of environmental protection. It is becoming increasingly difficult to find suitable sites that are acceptable to the public. Salt and salt formations have relevant properties to be utilizing as a repository for each kind of waste. The favorable properties make rock salt highly suitable as a host rock, in particular for nonradioactive and radioactive wastes. The Qom and Garmsar basins are the nearest salt diapirs to the Tehran province, and there are suitable repositories for waste disposal. Based on surface and subsurface data, the Garmsar salt diapir has been investigated as a case example for its suitability as a host and repository for various types of waste. The data used are based on field studies, interferometry, and geophysical investigations. The results of this study suggest the deep bedded salt of the Garmsar Salt Basin to be an appropriate host for the deposition of industrial waste. Rock salt of surficial layers or domes, on the other hand, is not regarded as an appropriate candidate for waste disposal.
Die kumulative Dissertation beschäftigt sich mit der atmosphärischen Konzentration von Eiskeimen, einer Unterklasse des atmosphärischen Aerosols, die bei der Eisbildung in Wolken eine zentrale Bedeutung besitzt. Messungen der Eiskeimkonzentration am Taunusobservatorium (Kleiner Feldberg) (nahe Frankfurt am Main) wurden mit dem Verfahren einer Vakuum-Diffusionskammer durchgeführt. Die Arbeit umfasst die Darstellung des angewandten Messverfahrens und die Analyse und Bewertung der Messergebnisse für den Raum Zentraleuropa, anhand von u.a. Rückwärtstrajektorien und Korrelationen zu aerosolphysikalischen Parametern. Ein signifikanter Einfluss von Mineralstaub-Ferntransport aus Wüstengebieten auf die Eiskeimkonzentration in Zentral-Europa wurde ermittelt.
Forty two samples of the Late Eocene Kiliran oil shale, Central Sumatra Basin, Indonesia were collected from a 102 m long drill core. The oil shale core represents the deposition time of about 240.000 years. Palynofacies and geochemical analyses have been carried out to reconstruct the paleoenvironmental conditions and paleoecology during deposition of the oil shale. Amorphous organic matter (AOM) is very abundant (>76%). B. braunii palynomorphs are present (3-16%) as the only autochtonous structured organic matter and generally more abundant in the middle part of the profile. The stable carbon isotopic composition of bulk organic matter (13C) varies from -27.0 to -30.5‰ and is generally more depleted in the middle part of the profile. The ratio of total organic carbon to sulfur (TOC/S), used as salinity indicator, ranges from 2.5 to 15.8 and shows variations along the profile. Slightly less saline environments are observed in the middle part of the profile. Fungal remains are generally present only in this part with a distinct peak of abundance. The presence of fungal remains is regarded as an indication for a relatively warmer climate during deposition of the middle part of the profile. The warmer climate is thought to influence the establishment of a thermocline, limiting the supply of recycled nutrients to epilimnion. Consequently, the primary productivity in the Kiliran lake decreased during deposition of the middle part of the profile as indicated by the relatively depleted 13C values and the blooming of B. braunii. The chemocline was also shoaling during the deposition according to the higher abundance of total isorenieratane and its derivatives originated from green sulfur bacteria dwelling in the photic zone euxinia. The warmer climate is also thought to influence the slightly decrease of water salinity during deposition of the middle part of the profile. The occurrence of B. braunii in Kiliran lake is also recognized from organic geochemical data. The distribution of n-alkanes is characterized by the unusual high amount of C27 n-alkane relative to the other long-chain n-alkanes. The concentrations of C27 n-alkane vary from 30.1 to 393.7 μg/g TOC and are generally in parallel with the abundances of B. braunii palynomorphs along the profile. The 13C values of this compound are about -31‰ and up to 2‰ enriched relative to those of the adjacent long-chain n-alkanes. B. braunii race A can thus be regarded as the significant biological source of the C27 n-alkane. Lower amounts of lycopane are observed in many oil shale samples (0 to 54.7 μg/g TOC). The 13C value of this compound is 17.2‰. This strong enrichment of 13C suggests that the lycopane was derived from B. braunii race L. The concentrations of lycopane develop generally in opposite with those of C27 μalkane. It is likely that both B. braunii races bloomed in alternation in the lake, probably due to changes on specific water chemistry. Norneohop-13(18)-ene and neohop-13(18)-ene derived from methanotrophic bacteria are the dominant hopanoid hydrocarbons. The sum of their concentrations varies from 40.6 to 360.0 μg/g TOC. The 13C of these compounds are extremely depleted (-45.2 to -50.2‰). The occurrence of abundant bacteria including methanotrophic bacteria was responsible for the recycling of carbon below the chemocline of the lake. The effect of the recycling of carbon is observed by the presence of a concomitant depletion (about 7-9‰) in 13C of some specific biomarkers derived from organisms dwelling in the whole phototrophic zone. 4-Methylsterane and 4-methyldiasterene homologues occur in the oil shale as the predominant biomarkers. The sum of the concentrations of all homologues are about 40.3-1,009.2 μg/g TOC with generally higher values in the uppermost and lower parts of the profile. Calcium (Ca) accounts as the predominant element in the oil shale, ranging from 5.0 to 16.7%. This element shows generally parallel variation with the 4-methylsterane and 4-methyldiasterene homologues along the profile. This suggests that these compounds were derived from biological sources favoring more alkaline and more trophic environments. On the other hand, these compounds were less abundant in the middle part of the profile which is consistent with less alkaline and less trophic environments promoting B. braunii to bloom. Alternation between Dinoflagellates and B. braunii in ancient lacustrine environments due to water chemistry changes have been known from previous studies. In the present case, distinct alternation between B. braunii abundances and concentrations of 4-methylsterane and 4-methyldiasterene homologues along the studied oil shale profile suggest a hypothesis that these compounds were derived from freshwater Dinoflagellates although dinosterane is not present in the sediment extracts. Water alkalinity and trophic level changes were most likely responsible for the alternation of Dinoflagellates and B. braunii blooming.
Das Ziel dieser Studie ist es, die Möglichkeiten und Grenzen von hochauflösenden Klimaprojektionen in orographisch beeinflussten Gebieten an den Beispielen der europäischen Alpen und des Himalajas zu prüfen. Insbesondere wird die Fragestellung untersucht, ob beobachtete regionale Muster in den höher aufgelösten Daten besser wiedergegeben werden als in den antreibenden großskaligen Daten. Dazu werden regionale Klimasimulationen des COSMO-CLM Modells und Daten von zwei statistischen Regionalisierungsmethoden mit ERA40 Reanalysen sowie Daten des globalen Atmosphäre-Ozean Modells ECHAM5/MPIOM für verschiedene Parameter des Klimasystems verglichen. Ein Vergleich mit den Reanalysen anhand täglicher Niederschlagsstatistiken ergibt, dass die COSMO-CLM Niederschlagsdaten auf der 0.5° Skala vergleichbar sind mit ERA40 Niederschlägen und mit statistisch regionalisierten ERA40 Niederschlägen. Eine zusätzliche Fehlerkorrektur der COSMO-CLM Niederschläge liefert gute Ergebnisse. Dabei sind jedoch etwa 500 Regentage notwendig, um eine robuste Fehlerabschätzung zu gewährleisten. Für das südasiatische Gebiet ist eine realistische Wiedergabe des indischen Sommermonsuns (ISM) in den Modellen von hoher Relevanz. Betrachtet man nur die Mittelwerte und zeitlichen Variabilitäten von verschiedenen Indizes des ISM, so liefert das COSMO-CLM keinen Mehrwert im Vergleich zu den antreibenden Daten. Allerdings werden die räumlichen Strukturen von Niederschlag und vertikaler Windscherung, sowie die zeitliche Korrelation der modellierten Indizes gegenüber dem ECHAM5/MPIOM Modell verbessert. Die durchgeführten COSMO-CLM Projektionen für die Jahre 1960 bis 2100 zeigen negative Trends des ISM für die SRES Szenarien A2, A1B und B1. Die negativsten Trends sind dabei im Szenario A2 zu finden, gefolgt von A1B und B1. Fast keine Trends zeigen sich im commitment Szenario. Trotz großen zeitlichen Variabilitäten sind die Abnahmen in Niederschlagsmengen, ausgehender langwelliger Strahlung und Windscherung statistisch signifikant in großen Regionen des Simulationsgebietes. Für Nordwest-Indien weisen die Projektionen teilweise einen Rückgang der Monsunniederschläge von über 70% in 100 Jahren auf. Der Rückgang der Windscherung ist hauptsächlich auf Veränderungen in der oberen Troposphäre bei 200 hPa zurück zu führen. Während in den COSMO-CLM Projektionen alle Indizes des ISM synchrone Negativtrends aufweisen, sind die Trends für den Monsunregen über Indien im globalen ECHAM5/MPIOM Model positiv. Gemäß den Definitionen der verschiedenen Indizes, sind jedoch synchrone Trends wahrscheinlicher und das COSMO-CLM liefert zu den globalen ISM Projektionen ebenfalls einen Mehrwert. Insgesamt zeigen die Ergebnisse dieser Studie, dass das COSMO-CLM wertvolle regionale Zusatzinformationen zu den globalen Modellen in den beiden untersuchten Regionen liefert. Für die Einzugsgebiete der oberen Donau und des oberen Brahmaputra liefern die COSMO-CLM Projektionen einen signifikanten Anstieg der Temperatur für alle Jahreszeiten der Jahre 1960 bis 2100. Die Werte sind generell höher im Brahmaputragebiet, mit den größten Trends in der Region des tibetanischen Plateaus. Im Niederschlag zeigen die saisonalen Anteile ebenfalls klare Trends, beispielsweise eine Zunahme des Frühjahrsniederschlags im Einzugsgebiet der oberen Donau. Die größten Trends werden wiederum in der Region des tibetanischen Plateaus projiziert mit einem Anstieg von bis zu 50% in der Länge der Trockenperioden zwischen Juni und September und einem gleichzeitigen Anstieg von etwa 10% für die maximale Niederschlagsmenge an fünf aufeinander folgenden Tagen. Für die Region Assam in Indien, zeigen die Projektionen zudem eine Zunahme von 25% in der Anzahl der aufeinander folgenden trockenen Tage während der Monsunzeit
In this thesis, laboratory investigations have been conducted to investigate several processes occurring during the melt segregation (crystal settling and compaction processes), as well as during emplacement of plutons. With the help of three different sets of centrifuge experiments rates of these three magmatic processes have been evaluated. In the first series of the centrifuge experiments, the diapiric ascent of buoyant material from two source layers at different depths was studied. Through five models, the hypothesis of ascending diapirs was tested and it was demonstrated whether a rising diapir ascends straight upward or if its ascent might be deviated by another buoyant, softer – and consequently easier to travel through – layer which is located within the overburden strata. We were interested under which conditions they can be formed. For this purpose we placed perturbations on top of both the buoyant layers; either with a set-off of both the protrusions (for three of these experiments), or with both protrusion sitting directly on top of each other (for one of the experiments). In the first experiment, we omitted the perturbations, to test which pathways diapirs take which grow from natural Rayleigh-Taylor instabilities. Three others experiments differed in the viscosity contrast between the overburden and the buoyant material. Through the experimental runs, the effects of different overburden viscosities and perturbation positions on the number of the diapirs were observed. The modeling results show that two diapirs rising from the offset perturbations do not take the same pathway through the overburden layer. Rather, each diapir takes a different pathway, with the deeper diapir piercing through its overburden while rising, regardless if it was a buoyant layer or denser overburden layers. However, when the two perturbations were situated directly above each other in the different PDMS layers, this resulted in the formation of one big diapir rather than several smaller ones, and the overburden layer was less deformed than with offset perturbations. Diapiric structures as those derived from the models without perturbation and where the perturbation are offset occur within Great Kavir Basin (Iran), where numerous salt diapirs grew from several salt horizons, which show a similar spatial distribution. The resulting structure observed in the model where the two perturbations situated directly above each other, is close to what is observed in composite batholiths such as the Flasergranitoid Zone within the Bergsträßer Odenwald Crystalline Complex (Germany). The second series of models were aimed to study crystal settling within a magma. For this purpose experiments with an artificial magma of 30 vol% olivine in 70 vol% basaltic melt were conducted to elucidate the formation mechanisms and time scales of gravitational cumulates. Through the experiments, two physical processes have been observed: (i) purely mechanical compaction, and (ii) chemical compaction induced by dissolution and re-precipitation of settled crystals. The results reveals that the mechanical settling of the dense olivine suspension occurs at about 1/6 the speed of simple Stokes settling, and a sedimentation exponent n of 4.1 is found. Evidences of chemical compaction induced by dissolution and re-precipitation of settled crystals have been highlighted by a detailed analysis of the fine structure of olivine grain boundaries. This last has revealed (1) the presence of Ca, which is characteristic only for MORB-melt, at the interface of two adjacent Ol-grains even when no melt is present; (2) a not fully crystallized boundary layer between two adjacent olivine grains. The crystal size distribution curves and the grain size growth exponent n ~3.6 indicate that diffusion controlled Ostwald ripening is the dominant crystal growth mechanism in concentrated magmatic suspensions. Finally, the formation times in natural olivine adcumulates have been calculated. The last series of centrifuge experiments deals with the crystal-melt settling-floating mechanism in a system composed of natural two pyroxene gabbro. The results have revealed a vertical evolution of the major and trace elements in the melt phase. Then, a numerical modelling of the sedimentation process of the crystals has been made in order to describe the compaction evolution with time. In comparing the numerical simulation with the centrifuge modelling, the stratification of the compacted layer in the runs is reproduced in numerical models. Moreover, on the base of the numerical and centrifuge modelling, a sedimentation exponent describing a deviation of settling in concentrated suspensions from Stokes sedimentation has been evaluated. Finally, the numerical simulation is applied to the Muskox intrusion to estimate the formation time and the melt fraction evolution in using the hindered sedimentation model calculations.
In this study, I investigate the crustal and upper mantle velocity structure beneath the Rwenzori Mountains in western Uganda. This mountain range is situated within the western branch of the East African Rift and reaches altitudes of more than 5000 m. I use four different approaches that belong to the travel-time tomography method. The first approach is based on the isotropic tomographic inversion of local data, which contain information about 2053 earthquakes recorded by a network of up to 35 stations covering an area of 140×90 km2. The LOTOS-09 algorithm described here is used to realize this approach. The second approach is based on the anisotropic tomographic inversion of the same local dataset. This method employs the tomographic code ANITA, developed with my participation, which provides 3D anisotropic P and isotropic S velocity distributions based on P and S travel-times from local seismicity. For the P anisotropic model, four parameters for each parameterization cell are determined. This represents an orthorhombic anisotropy with one vertically-oriented predefined direction. Three of the parameters describe slowness variations along three horizontal orientations with azimuths of 0°, 60° and 120°, and one is a perturbation along the vertical axis. The third approach is based on tomographic inversion of the teleseismic data, which contain information about the traveltimes of P-waves coming from 284 teleseismic events recorded by the seismic network stations. The TELELOTOS code, which is my own modification of the LOTOS-09 algorithm, is used in this approach. The TELELOTOS code is designed to iteratively invert the local and/or teleseismic datasets. Finally, I present the results of the new tomographic approach, which is based on the simultaneous inversion of the joint local and teleseismic data. The simultaneous use of these datasets for the tomographic inversion has several advantages. In this case, the velocity structure in the study area can be resolved as deep as in the teleseismic approach. At the same time, in the upper part of the study volume, the resolution of the obtained models is as good as in the local tomography. The TELELOTOS algorithm is used to perform the joint tomographic inversion. Special attention is paid in this work to synthetic testing. A number of different synthetic and real data tests are performed to estimate the resolution ability and robustness of the obtained models. In particular, synthetic tests have shown that the results of the anisotropic tomographic inversion of the local data have to be considered as unsatisfactory. For all approaches used in this study, I present synthetic models that reproduce the same pattern of anomalies as that obtained by inverting the real data. These models are used to interpret the results and estimate the real amplitudes of the obtained anomalies. The obtained models exhibit a relatively strong negative P anomaly (up to -10%) beneath the Rwenzori Mountains. Low velocities are found in the northeastern part of the array at shallower depths and are most likely related to sedimentary deposits, while higher velocities are found beneath the eastern rift shoulder and are thought to be related to old cratonic crust. The presence of low velocities in the northwestern part of the array may be caused by a magmatic intrusion beneath the Buranga hot springs. Relatively low velocities were observed within the lower crust and upper mantle in the western and southern parts of the study area (beneath the rift valley and the entire length of the Rwenzori range). The higher amplitude of the low-velocity anomaly in the south can be related to the thinner lithosphere in the southern part of the Albertine rift. In the center of the study area, a small negative anomaly is observed, with the intensity increasing with depth. This anomaly is presumably related to a fluids rising up from a plume branch in the deeper part of the mantle. According to the interpretation of the local earthquake distribution, the Rwenzori Mountains are located between two rift valleys with flanks marked by normal faults. The Rwenzori block is bounded by thrust faults that are probably due to compression.
Flusssysteme im mediterranen Raum reagieren besonders sensitiv auf Veränderungen von Umweltbedingungen, z.B. durch Neotektonik, Klimaänderungen und Landnutzung. Geowissenschaftler der Goethe-Universität Frankfurt untersuchen in diesem Zusammenhang das Einzugsgebiet des Rio Palancia (Spanien), um über die Erstellung einer Sediment-Massenbilanzierung die Entwicklungsgeschichte des Systems zu erforschen. Zur Identifizierung und Quantifizierung verschiedener Sediment-Ablagerungstypen wurde das Georadarverfahren (GPR) eingesetzt. Ziel dieser Arbeit ist es, am Beispiel fluvialer Lockersedimente das Zustandekommen von Radargrammen noch besser zu verstehen und möglichst viel Information über den Untergrund aus einem Radargramm zu extrahieren. An 30 Standorten wurden GPR-Messungen durchgeführt und mit Geoelektrik und Rammkernsondierungen kombiniert. Die Einführung einer Bearbeitungs- und Auswertesystematik gewährleistet die Vergleichbarkeit von Radardaten unterschiedlicher Standorte. Als Besonderheit werden die Radargramme jeweils auf zwei verschiedene Arten bearbeitet und dargestellt, um sowohl Strukturen herauszuarbeiten als auch die – zumindest relative – Amplitudencharakteristik zu erhalten. Erst dadurch wird eine Auswertung mithilfe der erweiterten Radarstratigraphie-Methode möglich. Diese setzt sich aus der klassischen Radarstratigraphie und der neu entwickelten Reflexionsanalyse zusammen. Dabei werden systematisch Radar-Schichtflächen, Radareinheiten und Radarfazies ermittelt und anschließend die Amplitudengröße, die Polarität und die Breite der Reflexionen betrachtet. Die Radarstratigraphie liefert objektive Erkenntnisse über Form und Verlauf von Untergrundstrukturen, während mithilfe der Reflexionsanalyse Aussagen zu relativen Änderungen von Wassergehalt, Korngrößenverteilung und elektrischer Leitfähigkeit möglich sind. Mithilfe der Radarstratigraphie wurde die Radarantwort verschiedener Sediment-Ablagerungstypen im Untersuchungsgebiet verglichen. Die Radargramme zeigen unterschiedliche Zusammensetzungen von Radarfazies. Eine Unterscheidung und räumliche Abgrenzung verschiedener Ablagerungstypen mit GPR ist somit durchführbar. Die Dielektrizität des Mediums bestimmt, zusammen mit der elektrischen Leitfähigkeit, die Geschwindigkeit und Dämpfung der elektromagnetischen Welle sowie die Reflexionskoeffizienten. Um das Zustandekommen von Radargrammen im Detail nachvollziehen zu können, ist es notwendig, die Dielektrizitätskoeffizienten (DK) der untersuchten Sedimente zum Zeitpunkt der Messung zu kennen und die Abhängigkeit des DK von petrophysikalischen Parametern zu verstehen. Deshalb wurden Proben aus den Rammkernsondierungen entnommen. Im Labor wurden der Real- und Imaginärteil des DK im Radarfrequenzbereich (mit Schwerpunkt auf 200 MHz) in Abhängigkeit von Wassergehalt, Trockendichte, Korngrößenverteilung und Kalkgehalt mithilfe der Plattenkondensatormethode bestimmt. Der DK ist in erster Linie vom Wassergehalt abhängig. Es konnte eine für die Sedimente im Untersuchungsgebiet charakteristische Wassergehalts-DK-Beziehung ermittelt werden. Die resultierende Kurve ist gegenüber entsprechenden in der Fachliteratur zu findenden Beziehungen verschoben, was vermutlich auf die hohen Kalkgehalte der Proben zurückzuführen ist. Für trockene Sedimente wurde eine Korrelation des DK mit der Trockendichte festgestellt. Bei der Bestimmung der Absorptionskoeffizienten fiel auf, dass Proben mit hohem Tonanteil selbst bei geringen Wassergehalten außerordentlich hohe Dämpfungskoeffizienten aufweisen können. Die charakteristische Wassergehalts-DK-Beziehung wurde für Modellierungen von Radardaten genutzt, die dann mit Messdaten verglichen wurden. Über die Modellierung einer einzelnen Radarspur konnte die spezielle Charakteristik der entsprechenden gemessenen Spur erklärt werden, die durch den Einfluss einer dünnen Schicht zustande kommt, deren Mächtigkeit an der Grenze der theoretischen Auflösung für die verwendete Radarfrequenz liegt. Auf Basis der Erkenntnisse aus der erweiterten Radarstratigraphie an einem Radargramm auf fluvialen Lockersedimenten war es zudem möglich, ein komplettes Radargramm zu simulieren. Es gibt das gemessene Radargramm vereinfacht, aber in guter Übereinstimmung wieder. Die Georadarmethode erwies sich als sehr gut geeignet für die Untersuchung, Identifizierung und Quantifizierung fluvialer Sedimente im Palancia-Einzugsgebiet. Die im Rahmen dieser Doktorarbeit entwickelte erweiterte Radarstratigraphie-Methode stellt ein systematisches und weitgehend objektives Verfahren zur Auswertung von Radargrammen dar, das sich auch auf andere Untersuchungsgebiete übertragen lassen sollte. Durch Laboruntersuchungen wurde der Einfluss petrophysikalischer Parameter auf den DK bestimmt. Über die Modellierungen konnten die Ergebnisse großskaliger Geländemessungen mit denen kleinskaliger Labormessungen verknüpft werden. Die insgesamt gewonnenen Erkenntnisse tragen zu einem besseren Verständnis von Radargrammen bei.
The TTL is the transition layer between the tropical troposphere and stratosphere, and is the main region where tropospheric air enters the stratosphere. In this thesis different transport processes are studied by using in situ measurements of tracers. Long-lived tracers were measured with the High Altitude Gas Analyzer (HAGAR) on board the M55 Geophysica aircraft. The instrument was developed by the University of Frankfurt and measures the long-lived tracers CO2, N2O, CFC-12, CFC-11, H-1211, SF6, CH4 and H2 with two gas chromatographic channels and a CO2 sensor (LICOR). The measurements are supported by CO and O3 measurements of other instruments. Two campaigns were conducted to obtain measurements in the TTL: SCOUT-O3 (November/December 2005 in Darwin, Australia) and AMMA-SCOUT-O3 (August 2006 in Ouagadougou, Burkina Faso). After a general introduction of the thesis in chapters one and two, the third chapter describes the findings during this last campaign. Five local flights are analyzed to study the different transport processes that occur in the tropical tropopause layer above West-Africa: deep convection up to the level of main convective outflow, vertical mixing after overshooting of air in deep convection, horizontal inmixing from the extratropical lower stratosphere, and horizontal transport across the subtropical barrier. Main findings are that the TTL over West-Africa is mostly influenced by remote convection. The subtropical barrier is not a strong barrier but more a region of transition between the extratropical and the tropical stratosphere. Chapter 4 presents the results obtained during the SCOUT-O3 campaign. From the eight local flights the last four flights (051129, 051130a, 051130b, 051205) show enhanced values of ozone, CO and CO2 between 355 and 380 K potential temperature in comparison with the first four flights (051116, 051119, 051123, 051125). Horizontal inmixing from the extra-tropical stratosphere and influence of the local convective system Hector cannot explain the enhanced values of the two flights on 30 November Therefore, other possible explanations for these enhanced CO, CO2 and ozone levels are proposed. The first explanation is vertical mixing in the vicinity of the jet stream. However, the jet cannot explain the differences between the flights on 30 November and the flights on 29 November and 5 December. Another possible explanation is influence of polluted boundary layer air masses from the Indonesian region. Especially air sampled during the flights on November 30 crossed large parts of northern Indonesia between 8 and 10 days before the measurements. Convective uplift of biomass burning and other pollution plumes can transport CO and ozone precursors into the upper troposphere, where they can significantly enhance the ozone production. The last chapter deals with the vertical ascent rate in the TTL and uses measurements of both the SCOUT-O3 and AMMA-SCOUT-O3 campaign as well as data from previous aircraft campaigns (TROCCINOX and APE-THESEO). Time scales and residence times for mean vertical transport in the background TTL are estimated for different seasons and over different geographic regions using in situ observations of CO2 and long-lived tracers. The vertical transport time scales are constrained using the seasonal variation of CO2 in the tropical troposphere as a “tracer clock” for vertical ascent. Two methods are applied to calculate the residence time in the layer between 360 and 390 K potential temperature. The first method uses the slope of the CO2 index, the second method fits the CO2 index directly to the measurements assuming a constant ascent rate. The first method yields residence times for Australia,West Africa, and Brazil of the same order, 35-45 days to 380 K and 50 days to 390 K (where no value can be derived for Australia as the slope is changing approximately one month before the campaign). For APE-THESEO, the method does not yield reasonable results. The best estimates using the second method show moderate residence times between 360 and 390 K of 60±25 days SCOUT-O3 (NH autumn) and 43±8 days for AMMA/SCOUT-O3 (NH summer). These results agree well with the results calculated using the first method. For APE-THESEO and TROCCINOX the best fits yield shorter residence times of 23±7 and 40±10 days, respectively, both during winter. These results correspond well to the expectations based on the seasonal variation of the Brewer-Dobson circulation.
An eclogite barometer has profound importance in the study of upper mantle processes and potential application to diamond prospecting. Studies on the partitioning of Li between clinopyroxene (cpx) and garnet (grt) in natural samples have shown that this particular element is very sensitive to changes in pressure and could be calibrated as the barometer demanded for bimineralic eclogites. Experiments were performed from 4 to 13 GPa and 1100 to 1400°C in the CMAS (CaO, MgO, Al2O3, SiO2) system with Li added as Li3PO4 to quantify this pressure dependence into a barometer expressed in the following equation: P= (0.00255*T-lnKd)/0.2351 where P is in GPa, T is in °C and Kd is defined as the partition coefficient of Li (in ppm) between clinopyroxene and garnet. The experimental pressures are reproduced to ± 0.38 GPa (1σ) by this equation. This barometer is strictly applicable only to CMAS. Experiments at 1300°C, 8-12 GPa showed that Henry’s Law is fulfilled for Li partitioning between cpx and grt in the concentration range of approximately 0.01 – 1 wt% Li. Direct application of the equation to experiments in natural systems performed at 1300°C from 4 GPa to 13 GPa consistently overestimates pressures by approximately 2 GPa. Our previous experiments in the system CaO-MgO-Al2O3-SiO2 + Li3PO4 showed that the partitioning of Li between garnet and clinopyroxene is pressure dependent in eclogitic bulk compositions. This supports experimentally the hypothesis of Seitz et al. (2003), based on the analysis of Li in eclogitic xenoliths and inclusions in diamond, that the partitioning of this particular element between clinopyroxene and garnet is very sensitive to changes in pressure and could be calibrated as a barometer for bimineralic eclogites. In order to calibrate this pressure dependence into a barometer, experiments were performed in natural systems using starting materials sourced from a well preserved eclogitic xenolith from the Roberts Victor kimberlite pipe (South Africa) to extrapolate our findings in CMAS to natural systems. Sixteen multianvil experiments were performed from 4-13 GPa and 1100-1500°C. Our findings reinforced the general trend we observed in the CMAS system, that KdLi cpx-grt for Li decreases with increasing P, and that at P ≥ 12 GPa, garnet is able to incorporate more Li than clinopyroxene. Multiple linear regression was applied to our experimental results to create the barometer: P = (0.000963*T – ln KdLi cpx-grt + 1.581) / 0.252 Where P is pressure in GPa, T is temperature in °C and KdLi cpx-grt is defined as the partitioning coefficient of Li obtained by dividing the concentration of Li in cpx by the concentration of Li in garnet. This barometer reproduces the experimental conditions to ± 0.2 GPa. It is applicable to eclogitic xenoliths, to garnet pyroxenites and to peridotitic and eclogitic inclusions in diamond. Application of the barometer to diamond bearing xenoliths results in pressures in the diamond stability field. Clinopyroxene is easily corrupted in xenoliths and also preferentially takes in Li during short lived metasomatic processes. Care must be taken therefore to analyse primary, unaltered clinopyroxene. Our preliminary application to natural samples shows that the barometer can be applied beyond the experimental range to pressures down to 3 GPa. Seventeen eclogitic xenoliths were chosen from a sample set of greater than 200 for their fresh microscopic and macroscopic appearance and were analyzed for Li content in coexisting garnet (grt) and clinopyroxene (cpx). These samples can be subdivided into two groups on the basis of Mg in cpx (cpfu: cations per formula unit, based on 6 oxygens): Group 1 with Mg > 0.75, and Group 2 with Mg < 0.75. Group 1 xenoliths show lower Li contents in both grt and cpx compared to Group 2. The Li barom ter calibrated in Hanrahan et al. (2009b)/Chapter 3 was applied to these samples as well as available literature data to obtain pressures of provenance - Group 2 xenoliths often provide pressures that appear unrealistic for eclogitic xenoliths. In light of observed crystal chemical relations in the natural samples, a new fitting procedure was applied to the experimental data presented in Chapter 3. This new fit appears to be more realistic than the previous fit, although a strong relationship with Mg# remains present, suggesting that Li-barometry is, at present, only applicable to Mg-rich eclogites. Inclusions in diamond, with the exception of eclogitic inclusions of coexisting majorite and cpx, often yield pressures that are inconsistent with the pressures required for diamond formation. Although an interesting observation when comparing all of the data is that inclusions in diamond have significantly higher average Li concentrations compared to xenoliths, which suggests that Li is highly present in the fluids from which diamonds form in the mantle, an observation which was previously made for the deep mantle as a result of high Li in ferropericlase inclusions in diamond (Seitz et al. 2003).
Östlich des Rwenzori Gebirges im Westen Ugandas wurden magnetotellurische Messungen durchgeführt. An 23 Stationen wurden Übertragungsfunktionen und Phasen Tensor Elemente zwischen den gemessenen magnetischen- und tellurischen Feldern im Periodenbereich von 10s bis 10000s geschätzt. Die Übertragungsfunktionen deuten eine komplexe drei dimensionale Leitfähigkeitsstruktur innerhalb der Kruste an, insbesondere in der Verbindungszone zwischen dem Rwenzori Gebirge und der östlichen Riftschulter. In dieser Arbeit wird eine alternative Darstellung der Phasen Tensor Ellipsen als Balken eingeführt. Für Perioden größer 100s zeigen die maximalen Phasen der Phasen Tensor Balken aller Stationen einheitlich in SSW-NNE und die Phasen Tensor Invarianten f min und f max weisen eine Differenz von mindestens 20° auf. Dieses auffällige Verhalten und die kleinen vertikalen magnetischen Feldr im gleich Periodenbereich kann mit einer anisotropen Leitfähigkeit in einer Tiefenbereich zwischen 30-50km mit der gut leitenden Richtung senkrecht zur Riftachse erklärt werden. Die Anisotropie könnte ihren Ursprung in orientierten Olivien Kristallen im oberen Mantel haben, wobei die Orientierungsrichtung mit der Delamination der Unterkruste unter den Rwenzoris zusammen hängen kann. Eine gut leitende Zone süd-östlich der Rwenzoris wurde in 15km Tiefe gefunden, die mit einer seismischen low velocity zone übereinstimmt und partielle Schmelzen innerhalb der Kruste andeutet. An allen Stationen steigt die minimale Phase bei der Periode 200s über 45° und zeigt einen Anstieg der elektrischen Leitfähigkeit unterhalb der Lithosphäre an.
Within the present study the occurrence and fate of the organophosphorus flame retardants and plasticizers tris(2-chloroethyl) phosphate (TCEP), tris(2-chloro-1-methylethyl) phosphate (TCPP), tris(1,3-dichloro-2-propyl) phosphate (TDCP), tris(2-butoxyethyl) phosphate (TBEP), tri-iso-butyl phosphate (TiBP), and tri-n-butyl phosphate (TnBP) in precipitation, lake water, surface runoff and groundwater from urban and remote areas in Germany was investigated between June 2007 and October 2009. 255 samples of precipitation, 210 samples of lentic surface water and 72 samples of groundwater were analyzed for the six organophosphates (OPs) by solid phase extraction followed by gas chromatography-mass spectrometry. The research focused on aspects concerning (1) the atmospheric washout of OPs by precipitation, (2) the temporal variation of OP concentrations in precipitation and in lentic surface waters as well as (3) the pollution of groundwater by OPs. The results of the study emphasize the importance of precipitation as an all-season entry-pathway for OPs in the aquatic environment, particularly in densely populated urban environments with high traffic volume and abundant usage of flame-protected products. No seasonal trends were observed for all analytes in precipitation at the urban sampling site. TCPP dominated in all precipitation and storm water holding tank (SWHT) water samples with maximum levels exceeding 1 µg/L. An accumulation of OPs deposited in SWHTs was observed with concentrations often exceeding those observed in wet precipitation. Median concentrations of TCPP (880 ng/L), TDCP (13 ng/L), and TBEP (77 ng/L) at the urban SWHT were more than twice as high as those measured at the urban precipitation sampling site (403 ng/L, 5 ng/L, 21 ng/L) located close to the SWHT. OP levels in more remote lakes were often below or close to the limits of quantitation (LOQ). Nevertheless, TCPP was the substance with the highest median concentration in rural volcanic lakes (7–18 ng/L) indicating an atmospheric transport of the compound. At urban lakes the median OP concentrations were in the range of 23–61 ng/L (TCEP), 85–126 ng/L (TCPP), <LOQ–53 ng/L (TBEP), 8–10 ng/L (TiBP), and 17–32 ng/L (TnBP). In laboratory experiments, TBEP, TiBP, and TnBP were photochemically degraded in spiked lake water samples upon exposure to sunlight. In the SWHT a seasonal trend with decreasing concentrations in summer/autumn was evident for TiBP and TnBP but not for the chlorinated OPs. The decreasing concentrations can be explained by in-lake photodegradation. Results have also shown that the occurrence of OPs in groundwater is depending on the anthropogenic impact during groundwater recharge/natural replenishment. Infiltration of precipitation was found to be no important entry-pathway for OPs into aquifers at rural sites. Highest OP concentrations (>0.1 µg/L) were determined in groundwater polluted by percolating leachate from contaminated sites or groundwater recharged via bank filtration of OP-loaded recipients. Concentrations of TCEP, TCPP, TiBP and TnBP in groundwater decreased rapidly (89–97%) during bank filtration with increasing distance from the recipient due to adsorption processes and/or biotransformation. Although TCEP and TCPP are stable within the aquifer, they are not suitable as conservative organic tracers in groundwater.
Until now, the NW Indian Ocean was sparsely covered with coral proxy records, and records from the Maldives Archipelago do not exist. The first such coral proxy record from the central Maldives is presented in this study. It originates from a massive Porites lutea (Quoy and Gaimard, 1833) colony that was sampled March 2007 in the lagoon of Rasdhoo Atoll (4°N/ 73°W), which is located in the central Maldives. The record spans a period of 90 yrs and reaches back to 1917 AD with monthly to bimonthly resolution. This study investigates temporal variations of the skeletal stable oxygen (delta18O) and carbon (delta13C) isotopes, the strontium-to-calcium (Sr/Ca), and the annual extension-rates, and their relationship to historical climate variations 1917-2007. Annual extension-rates show an increase over the 20th century, and are correlated with instrumental sea surface temperatures (SST). The interannual variation of the extension-rates within 2.5-4 years is driven by the El Niño-Southern Oscillation (ENSO). The amount of skeletal extension during the summer months is triggered by variations in the strength of the SW monsoon. Interannual and decadal variability in monsoon current activity (18-19 yrs) and rainfall over India are an expression of the summer monsoon strength. This is the reason why a statistical link between coral extension-rates and precipitation over India can be established. This implies that annual extension-rates in corals can be used as a new proxy for Indian monsoon variability on decadal resolution. The delta18O record exhibits the 20th century warming trend that is influenced by the effect of monsoon-induced cooling. delta18O also reveals interannual ENSO triggered variability, which is due to ENSO-forced variations in SST and sea surface salinity (SSS). A decadal variation at 12-14 yrs cannot be linked to SST variations in the NW Indian Ocean, but with decadal variations of SSS. They could be caused by ENSO- forced variations of the monsoon currents during the mature phase of ENSO teleconnections in the Indian Ocean in boreal winter. The Sr/Ca record does not indicate a significant warming, in spite of the observed SST rise at the sampling site. Changes in seawater Sr/Ca cannot be excluded. Nevertheless, interannual ENSO forcing is still evident. Evidence for the Pacific Decadal Oscillation (PDO) is found during 1917-1955. Afterwards, the Sr/Ca data indicate the disappearance of PDO forcing. By the combination of Sr/Ca and delta18O it is possible to detect ~80% of historical El Niño and La Niña events at the sample site. This study confirms the notion that interannual to multi-decadal climate fluctuations in the Pacific play a crucial role for climate variability in the Indian Ocean.
The present PhD-thesis was prepared within subproject B8 of the DFG-Sonderforschungsbereich (SFB) 641 “The Tropospheric Ice Phase”. The subproject B8 was entitled “Interactions of volatile organic compounds with airborne ice crystals”. Results of previous studies have shown that various volatile organic compounds (VOC) and semivolatile organic compounds (SVOC) are incorporated into the atmospheric ice phase and several uptake mechanisms are discussed in the literature. The aim of this study was to identify the dominating VOC and SVOC in airborne snow collected at Jungfraujoch in the Swiss Alps (3580 m asl) and to study in laboratory experiments the uptake mechanism of organic compounds into snow and ice. For this purpose an analytical method to analyse freshly fallen snow samples was developed and evaluated in a first step. The method consists of headspace (HS) solid phase dynamic extraction (SPDE) followed by gas chromatography combined with mass spectrometry (GC/MS). During the extraction process a new cooling device was successfully integrated into the HS-SPDE-GC/MS method to enhance the extraction yield. Extraction and desorption parameters such as the number of extraction cycles, extraction temperature, desorption volume and desorption flow rate have been optimized. Detection limits for benzene, toluene, ethylbenzene, m-, p-, o- xylene (BTEX) ranged from 19 ng L-1 (benzene) to 30 ng L-1 (m/p-xylene), while those for C6-C10 n-aldehydes ranged from 21 ng L-1 (n-heptanal) to 63 ng L-1 (n-hexanal). Furthermore, freshly fallen snow samples were collected at the High Altitude Research Station Jungfraujoch (3580 m asl, Switzerland) during the field campaigns “Cloud and aerosol characterization experiment” (CLACE) 4 and 5 in February and March 2005 and 2006, respectively. Freshly fallen snow samples collected directly in-cloud on a high altitude remote location were used as approximation of airborne ice crystals since sampling of airborne ice crystals in quantities sufficient for analysis of individual organic compounds is not yet possible. In the collected snow samples a wide range of organic compounds were identified, namely BTEX, n-aldehydes (C6-C10), terpenes, chlorinated hydrocarbons and alkylated monoaromatics. The most abundant organic compounds in snow samples from Jungfaujoch during CLACE 4 and 5 were n-hexanal with a median concentration of 1.324 μg L-1 (CLACE 5) followed by n-nonanal (CLACE 5) with a median concentration of 1.239 μg L-1. High concentration variations of the analytes in snow samples collected at the same time at the same place argue for a heterogeneous composition of snow and ice. Several indicators were found that the origin of the n-aldehydes in the snow can be attributed to direct biogenic emissions from vegetation and indirect biogenic emissions through photochemical oxidation of fatty acids and alkenes. In a second step laboratory experiments were carried out to clarify the uptake mechanism of volatile and semivolatile organic compounds into snow/ice. Organic compounds can be incorporated into the atmospheric ice phase either by the process of gas scavenging, liquid scavenging (riming) or particle scavenging. Gas scavenging (incorporation of the organic compounds from the gas phase during growing of ice crystals) revealed to be ineffective based on previous laboratory experiments in which ice crystals were growing in the presence of aromatic hydrocarbons (BTEX) in the gas phase. In the present study the process of liquid scavenging (riming) was investigated in the laboratory using aqueous standard solutions containing BTEX, naldehydes (C6-C10), methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE). The headspace above the standard solution was sampled after adjusting the aqueous solutions to definite temperatures by use of a thermostat. Measurement were carried out at 25°C, 15°C and 5°C (water), -5°C and -15°C (supercooled water) and -25°C (ice). Results have shown that the known trend of lower gas phase concentrations over water concomitant with lower temperatures (Henry’s Law) is only valid for temperatures above 0°C. At temperature below 0°C, increasing concentrations of the analytes (BTEX, MTBE, ETBE and n-aldehydes) were determined in the gas phase together with decreasing temperatures. Dimensionless Henry’s law coefficients (KAW) were calculated from the concentrations of the organic compounds in the headspace above the standard solutions at temperatures between 25°C and -25°C. The observed inversion of Henry’s law coefficients of volatile and semivolatile organic compounds at a water temperature of approximately 0°C is explained by the formation of ordered zones of H2O molecules in supercooled water called “ice-like-clusters”. Together with decreasing temperatures the degree of formation of ordered zones increases which results in the removal of the organic molecules from the liquid phase and transfer into the gas phase. At a temperature of -25°C the supercooled water is converted into ice and a further significant increase of the gas phase concentrations of hydrophobic compounds such as BTEX is observed. In comparison, less hydrophobic compounds such as MTBE, ETBE and n-aldehydes are detected in lower amounts in the gas phase above the water/ice phase due to the higher water solubility and lower Henry coefficients compared to BTEX. The results show that in the absence of particles the uptake of BTEX MTBE, ETBE and C6-C10-naldehydes into ice not enhanced during freezing of a supercooled liquid, since at -25°C for these analytes the concentrations in the gas phase are higher at -25°C (ice) compared with -15°C (supercooled liquid). The heterogeneous distribution of BTEX and n-aldehydes concentrations in snow samples collected during the CLACE field campaigns suggests that adsorption of the organic compounds to particles followed by incorporation of the particles into the snow and ice might play a major role in the uptake process of organic compounds into snow and ice. To increase the knowledge about uptake processes of organic compounds into snow and ice further experiments are required with should include aerosol particles in the experimental setup to evaluate the influence of particle scavenging in the uptake processes.
Delthyridoid spiriferids are characterized by a global abundance and fast evolution during Silurian and Devonian, and, therefore, are used as important biostratigraphical and palaeobiogeographical tools. In this work, delthyridoid brachiopod faunas from different regions of today’s world, resp., of different palaeobiogeographical units, are compared side-by-side to investigate their phylogenetic relationships and to improve, in a second step, the palaeobiogeography from Late Silurian to Early Eifelian time. A new systematics of Delthyridoidae is established which is more complicated than hitherto assumed. The results of this study are mainly based on direct comparison of articulated and isolated brachiopod shells, external and internal moulds, as well as latex casts and serial sections. The computer supported cladistic analyses have turned out not to be useful due to different kinds of preservation resulting in an incomplete matrix which is insufficient for reliable cladograms. A further problem in terms of cladistical analyses are various convergences during the evolution of spiriferids. Many characters evolved independently from each other at different times in each lineage so that autapomorphies are hardly or not at all recognizable. As a result, families and genera are only definable by a combination of characters rather than by a single or a few autapomorphies. As a new method, 3D reconstruction from serial sections is introduced which made it possible for the first time to compare directly mouldic and shelly material. Preliminary results are presented herein. Statistical analyses of measurements taken from new taxa are made but regarded as a descriptive argument rather than a deciding factor for taxonmy due to incomplete preservation and/or tectonic deformation. Brachiopods, especially type material, from collections of different institutions and museums are studied as well as personal material, whenever possible collected from topotype outcrops. Emended diagnoses, if necessary, from family to species level are given. During this work several new taxa have been erected: 7 new families: Australospiriferidae, Murchisonispiriferidae, Orientospiriferidae, Otospiriferidae, Patriaspiriferidae, Rostrospiriferidae, and Trigonospiriferidae; 6 new genera, 1 of these in open nomenclature: Cyclopterospirifer, Hallispirifer, Parlinispirifer, Murchisonispirifer, Shujiapingensispirifer, and gen. nov. B; and 3 new species: Patriaspirifer merriami, Patriaspirifer johnsoni, and Murchisonispirifer feldmani; 1 taxon is defined as nomen novum: Orientospirifer nakaolingensis wani. In the framework of this project, 2 families: Filispiriferidae and Multispiriferidae; 1 subfamily: Multiplicatispiriferinae, 6 genera, 1 of them in open nomenclature: Frequentispirifer, Leonispirifer, Multiplicatispirifer, Ovetensispirifer, Turcispirifer, and Gen. A; and 9 new species, 3 of them in open nomenclature: Filispirifer hamadae, Leonispirifer leonensis, Multiplicatispirifer foumzguidensis, Oventensispirifer novascotianus, Quiringites arensentiae, Turcispirifer turciae, Multiplicatispirifer cf. foumzguidensis, Quiringites cf. arensentiae, and ?Turcispirifer sp. A which have already been established are also described in this work. The brachiopod faunas studied consist of externally very similar spiriferids which have been identified as same genera, species, or even subspecies in earlier times. These forms are considered as 6 distinct morphotypes Howellella-, Arduspirifer-, Acrospirifer-, Euryspirifer-, Paraspirifer-, and Multiplicatispirifer-like morphotypes, which are briefly introduced. The new systematics is characterized by different clades, the European/North African delthyridoid spiriferid clade, the North American delthyridoid spiriferid clade, the Asian delthyridoid spiriferid clade, the Malvinokaffric delthyridoid spiriferid clade, and the delthyridoid multiplicated spiriferid clade. Each of them is described in a cladistic and in a phylogenetic way. Their phylogenetic relationship sheds new light on palaeobiogeographical interpretations for the different stages from Late Silurian to early Middle Devonian time. A tendency for increasing endemicity is seen until the end of the Early Emsian, which is interrupted by short term regional faunal exchange within a province or within a realm, followed by a loss of endemicity resulting in global distribution of brachiopod genera until the end of Givetian time. The Old World Realm is re-defined due to the lack of phylogenetic relationship between its faunas and subdivided into the European Realm, consisting of the Gondwanan and Avalonian provinces, and the Asian Realm, consisting of the Siberian, Sino, and Mongolian provinces. A reconstruction of Lower Devonian palaeobiographical map is introduced.
NASAs Stardust Mission ist die erste Mission, die - nach den Apollo Missionen zum Mond - Material von einem extraterrestrischen Körper erfolgreich für die Untersuchung auf der Erde, zurückgebracht hat. Desweiteren konnten erfolgreich Proben von einem Interstellaren Partikelstrom aufgesammelt werden, der das Sonnensystem derzeit passiert. Die Mission erlaubt einen Einblick in die Beschaffenheit der Kometenpartikel, die Rolle von Kometen im Sonnensystem sowie den Eintrag von Staub in die Zodiakalwolke. Desweiteren erlaubt die Analyse der Kometenpartikel den direkten Vergleich zu bereits untersuchten Meteoriten und Interplanetaren Staub Partikeln (IDPs) die auf der Erde bzw. deren Stratosphäre gesammelt wurden. Stardust ist die vierte ”Discovery” Mission und wurde am 7. Februar 1999 gestartet. Während des Fluges zum Kometen 81P/Wild 2 wurde ein interstellarer Partikelstrom beprobt und der Asteroid Annefrank passiert. Nach fünf Jahren kam es zum Zusammentreffen mit dem Kometen 81P/Wild 2 und über fünf Minuten, wurden Proben mit einer Auffangvorrichtung eingesammelt. Es dauerte weitere zwei Jahre bis die Stardust Sonde die Proben erfolgreich zur Erde zurückgebracht hat und zur Untersuchung freigegeben wurden. Interstellare und kometare Partikel wurden mit einer tennisschlägerartigen Auffangvorrichtung eingefangen, die aus einer Vielzahl von Aerogel Zellen aufgebaut ist. Das für die Stardust Mission verwendete Aerogel besteht aus SiO2 dessen dendritische Struktur zu 99,8 % aus Luft (Poren) besteht. Dadurch erscheint es nahezu transparent, was die optische Suche mit Mikroskopen nach den Einschlagsspuren der Körner vereinfacht. Die jeweiligen Partikel wurden auf unterschiedlichen Seiten der Vorrichtung eingefangen, da unterschiedliche Eigenschaften des Aerogels notwendig waren und um sie später voneinander unterscheiden zu können. Die Seite, in der die Kometenpartikel eingefangen wurde, musste Körner mit unterschiedlichen Grössen, Morphologien und niedrigeren Geschwindigkeiten abbremsen, während auf der interstellaren Seite die Körner von wesentlich höheren Geschwindigkeiten abgebremst werden mussten. Die Aerogelzellen haben ein variierendes Dichteprofil: an der Oberfläche ist die Dichte geringer (5 mg/ml) und erhöht sich mit der Tiefe auf 30-50 mg/ml. Dieses Dichteprofil ist notwendig, da beim Einschlag der Körner auf das Auffangmedium ein hoher Druck entsteht, der umso geringer ist, je niedriger die Dichte im Moment des Auftreffens ist. Die Aerogelzellen für die Kometenpartikel haben drei Lagen mit unterschiedlichen Dichten, die Zellen für die interstellaren Körner haben zwei unterschiedliche Dichten (Tsou et al., 2003)....
New industries are recognized as new impetus to national wealth. At the same time, they are increasingly becoming geographically concentrated in some well defined areas. But current studies on the emergence of industrial clusters tend to analyze favorable driving factors. This dissertation takes the example of a Chinese endogenous industrial cluster, the traditional Chinese medicine (TCM) cluster at Tonghua, a small peripheral city in Northeastern China, to contribute to the theoretical understanding of the emergence of industrial cluster as a co-evolutionary process of organizations, institutions and firms, or, to put it more broadly, as economic evolution embedded in complex socio-economic contexts. The recent advance in evolutionary and co-evolutionary economics which considers the economy and economic landscape as dynamic process instead of equilibrium can be regarded as a part of broader and more intellectual turn of quest for history in social sciences. Although the principle of "history matters" is widely acknowledged, it tends to be reduced to a quite simple concept of "path dependence". However, path dependence cannot offer space for new path creation, except from an external shock. Accordingly, the role of human conscious action or Schumpeterian innovation should be added to path analysis through the concept of path creation. Furthermore, and more importantly, history should be understood as context, and historical context can be explored through the understanding of multi-paths and interaction among them over time. So path inter-dependence (co-evolution between paths) would be useful to better understand the complexity of real history. Since the industrial cluster is composed of interconnected firms and is also subject to changes in institution and technology, I will focus on the multi-way causal relationship between firm, institution and technology. The theorizing is not entirely new, but most of the theoretical and empirical discussions are at the national or industrial level, not regional or local one. A competitive cluster can be regarded as a co-evolutionary hotspot in which multiple populations actively interact and are interconnected. Co-evolution itself is a dynamic and evolutionary process. So I will adopt a dynamic and evolutionary view to examine co-evolutionary degree or co-evolutionary effects in the Tonghua pharmaceutical cluster through time. After a brief introduction which deals with the national institutional changes that are highly associated with new venture creation, entrepreneurship, and innovation, with registrations on drug and healthcare system, and with changes in market demand of China’s pharmaceutical industry and geographical distribution, I will collect evidences from three aspects based upon field survey and second hand data, i.e., the history of the enterprises, the origin of entrepreneurship, and the knowledge of evolution, linking their respective generative relationships through the genealogical method. In this volume, the evolution of the Tonghua pharmaceutical firm organization, the formation of local entrepreneurship, historical accumulation of knowledge, and particular knowledge of transfer among generations of firms will be discussed, then I will probe into co-adaption and co-evolution between local formal and informal institutions and organizations in Tonghua’s TCM industry. In addition, I will try to understand the co-evolutionary process at different geographical levels (namely, national and local). In summary, my main findings include the following several points. Firstly, in the course of the emergence of Tonghua’s pharmaceutical industry, local social networks and the traditional alliance between enterprises and government have played important roles. Secondly, the most important factor that influences the evolution of endogenous industrial clusters such as the Tonghua pharmaceutical industry in transitional countries is not the change in technology, but the change in fundamental national institutions. Thirdly, the success of the Tonghua pharmaceutical industry can be ascribed to the creation of multiple paths largely based on initial conditions, which implies that economic policy should have historical consciousness, namely, new economic innovation should make full use of both historical legacies and existing assets. Finally, it is co-adaption and co-selection of firm organization, institution, and technology that have jointly made Tonghua’s pharmaceutical industry become highly competitive, which means that whether one region can grasp new opportunities partially depends on its capabilities to coordinate a varity of development agents.
Trace elemental concentrations of bivalve shells content a wealthy of environmental and climatic information of the past, and therefore the studies of trace elemental distributions in bivalve shells gained increasing interest lately. However, after more than half century of research, most of the trace elemental variations are still not well understood and trace elemental proxies are far from being routinely applicable. This dissertation focuses on a better understanding of the trace elemental chemistry of Arctica islandica shells from Iceland, and paving the way for the application of the trace elemental proxies to reconstruct the environmental and climatic changes. Traits of trace elemental concentrations on A. islandica shells were explored and evaluated. Then based the geochemical traits of the shells, four non-environmental/climatic controlling is indentified. (1) Trace elemental concentrations of bivalve shells are effected by early diagenesis by the leach or exchange of elemental ions, especially in shell tip part, even with the protection of periostrucum; (2) The analytical methods also affect the results of trace elemental concentrations, especially for the element, such as Mg, which is highly enriched in organic matrices; (3) Shell organic matrices are found play a dominating role on the concentration of trace elements on A. islandica shells. Most trace elements only occurred in insoluble organic matrices (IOM), although others are only found in the carbonate fraction. IOM of A. islandica shells is significantly enriched in Mg, while Li and Na are more deplete in IOM, but enriched in shell carbonate. Ba is more or less even contented in IOM and shell carbonate. The concentrations of certain elements vary between primary layer and secondary layer; (4) The vital /physiological controlling on trace elemental distributions of bivalve shells is also confirmed. Six elemental (B, Na, Mg, Mn, Sr, and Ba) concentrations show significant correlation (exponential functions) with ontogenetic age and shell grow rates (logarithmic equations). It is worthy to remark that B, Mg, Sr and Ba concentrations are negatively correlated with shell growth rate, positive with ontogenetic age, while the concentrations of Na and Mn show the opposite trends. At last, all the controlling described above can be taken into account and corrected to extract the environmental and climatic signal by a kind of standardization. The derived six exponential functions of the high correlations between six trace elemental concentrations and ontogenetic year are applied to make the standardization of these element-Ca ratios. The gotten standardized indices are compared with the variations of environmental and climatic parameters in this region, and many correlations are found. Standardized indices of Sr/Ca ratios are strongly related to the sun spot number, autumn NAO, autumn Europe surface air temperature (SAT) and Arctic sea surface temperature anomaly (TA), and those of Mg/Ca ratios are strongly associated with Arctic TA, Europe SAT and Solar variation (irradiance). The variations of autumn Europe SAT demonstrated more similarity with standardized indices of B/Ca than other parameters. Except for the SAT index of Arctic, the standardized indices of Na/Ca showed no distinct relation to temperature. European precipitation and the Arctic sea level pressure index compared well the Na/Ca ratios of the shells, and so did the autumn NAO. Standardized indices of Mn/Ca were correlated with the number of hurricanes in the North Atlantic, Northern Europe SAT and sun spot number.
The crude oil constituents benzene, toluene, ethylbenzene, and the three xylene isomers (BTEX) are the dominating groundwater contaminants originating from surface spill accidents by oil production facilities and with gasoline and jet fuel. Thereby BTEX posing a threat to the world´s scarce drinking water resources due to their water solubility and toxicity. An active remediation cleanup involving a BTEX event proves not only to be very expensive but almost impossible when it comes to the complete removal of contaminants from the subsurface. A favoured and common practice is combining an active remediation process focussing on the source of contamination coupled together with the monitoring of the residual contamination in the subsurface (monitored natural attenuation; MNA). MNA include all naturally occuring biological, chemical and physical processes in the subsurface. The general goal of this work was to improve the knowledge of biodegradation of aromatic hydrocarbons under anaerobic conditions in groundwater. For this groundwater and soil at the former military underground storage tank (UST) site Schäferhof – Süd near Nienburg/Weser (Niedersachsen, Germany) were sampled and analysed. The investigations were done in collaboration of the Umweltbundesamt, the universitys of Frankfurt and Bremen and the alphacon GmbH Ganderkesee. To investigate the extent of groundwater contamination, the terminal electron acceptor processes (TEAPs) and the metabolites of BTEX degradation in groundwater, six observation wells were sampled at regular intervals between January 2002 and September 2004. The wells were positioned in order to cover the upstream, the source area and the downstream of the presumed contamination source. Additionally, vertical sediment profiles were sampled and investigated with respect to spreading and concentration of BTEX in the subsurface. A large residual contamination involving BTEX is present in soil and groundwater at the studied locality. Maximum BTEX concentration values of 17 mg/kg were recorded in analysing sediment in the unsaturated zone. In the capillary fringe, values of 450 mg/kg were recorded (October 2004) and in the saturated zone maximum values of 6.7 mg/kg BTEX were detected. The groundwater samples indicate increasing BTEX concentrations in the groundwater flow direction (from 532 µg/l up to 3300 µg/l (mean values)). Biodegradation of aromatic hydrocarbons under anaerobic conditions in the sub surface at contaminated sites is characterised by generation of metabolites. From the monoaromatic hydrocarbons BTEX metabolites such as benzoic acid (BA) and the methylated homologs and C1-and C2-benzyl-succinic acids (BSA) are generated as intermediates. A solid-phase extraction method based on octadecyl-bonded silica sorbent has been developed to concentrate such metabolite compounds from water samples followed by derivatization and gas chromatography/mass spectrometry (GC/MS) of the extracts. The recovery rate range between 75 and 97%. The method detection limit was 0.8 µg/l. Organic acids were identified as metabolic by-products of biodegradation. Benzoic acid, C1-, C2- and C3-benzoic acid were determined in all contaminated wells with considerable concentrations. Furthermore, the depletion of the dominant terminal electron acceptors (TEAs) oxygen, nitrate, and sulphate and the production of dissolved ferrous iron and methane in groundwater indicate biological mediated processes in the plume evidently proving the occurrence of NA. A large overlap of different redox zones at the studied part of the plume has been observed. A important finding in this study is the strong influence of groundwater level fluctuations on the BTEX concentration in groundwater. A very dry summer in 2003 was recorded during the monitoring period, resulting on site in a drop of the groundwater level to 1.7 m and a concomitant increase of BTEX concentrations from 240 µg/l to 1300 µg/l. The groundwater level fluctuations, natural degradation and retention processes essentially influence BTEX concentrations in the groundwater. Groundwater level fluctuations have by far a stronger influence than the influence of biological degradation. Increasing BTEX concentrations are hence not a consequence of limited biological degradation. Another part of the study was to observe the isotopic fractionation of the electron acceptor Fe(III), due to biologically mediated reduction of Fe(III) to the watersoluble Fe(II) at the site and first field data are presented. Both groundwater and sediment samples were analysed with respect to their Fe isotopic compositions using high mass resolution Multi Collector-Inductively Coupled Plasma-Mass Spectrometry (MC-ICP-MS). The delta56Fe -values of groundwater samples taken from observation wells located downstream of the source area were isotopically lighter than delta56Fe -values obtained from groundwater in the uncontaminated well. The Fe isotopic composition of most parts of the sediment profile was similar to the Fe isotopic composition of uncontaminated groundwater. Thus, a significant iron isotope fractionation can be observed between sediment and groundwater downstream of the BTEX contamination.
Die vorliegende Arbeit beschäftigt sich mit der geochemischen und isotopischen Analyse detritischer Zirkonminerale aus rezenten Sedimenten des weit verzweigten Orange- und Vaal River Flusssystems in Südafrika. Zirkone kristallisieren überwiegend aus krustalen Schmelzen und sind äußerst resistent gegenüber jeglicher Zerstörung und damit ein idealer Kandidat zur Rekonstruktion früherer Krustenbildungsprozesse der geologischen Erdgeschichte. Der kombinierte Ansatz der U-Pb Altersdatierung, der Hf Isotopie und der Spurenelementgeochemie mittels Laserablation und des Einsatzes induktiv-gekoppelter Sektorfeld- und Multikollektormassenspektrometer ermöglicht es die krustale Wachstums- und Entwicklungsgeschichte des südafrikanischen Kratons zu erfassen. Die mehr als 1200 U-Pb Analysen der Zirkone weisen 4 tektonische Hauptphasen des südafrikanischen Kontinents nach: 1. die Panafrikanische Orogenese (0.5-0.7 Ga), 2. das Namaqua-Natal Faltengürtelorogen (1.0-1.3 Ga), 3. die Kheis Orogenese (1.8-2.0 Ga) und 4. die westliche Kaapvaal-Kratonisierung (2.9-3.2 Ga). Allerdings zeigt sich, dass die 13 Probenlokationen überwiegend lokale bzw. regionale U-Pb Altersdaten ihrer umgebenden Herkunftsgebiete liefern. Die Hf Isotopie der Zirkone der verschiedenen tektonischen Hauptphasen Südafrikas stellen ihre differenzierte Akkretions- und Aufschmelzungsgeschichte dar. Die panafrikanischen Zirkone zeigen eine ausgeprägte Durchmischung von juvenilem und recyceltem Material. Die mesoproterozoischen (Namaquan) Zirkone entstanden aus juvenilem Magma während eines Inselbogen-Kontinent-Kollisionsereignisses. Die paläoproterozoischen und archaischen Zirkone sind Produkte von aufgeschmolzener prä-existierender kontinentaler Kruste oder vom Mantel abstammende Schmelzen, die durch kontinentale Kruste kontaminiert wurden. Die berechneten Hf Modellalter, so genannte „Mantelextraktionsalter" ergeben zwei Maxima, die zwei Stadien juvenilem Krustenwachstums einschließen, einmal vor 1.4 und 3.2 Ga. Dieses krustale Wachstum zeigt eine Übereinstimmung mit den progressiv episodischen Modellen von Nagler & Kramers (1998) sowie Condie (2000) mit Höhepunkten zwischen 3.0 und 2.0 Ga sowie den Studien von Wang et al. (2008) mit krustalen Wachstumsperioden von 1.6 bis 2.2 und 2.9 bis 3.4 Ga auf dem Nordamerikanischen Kontinent und auf dem Gondwana-Kontinent (Australien) von Hawkesworth & Kemp 2006) und implizieren wohl ein globales kontinentales Krustenwachstum. Die Abgrenzung und Wiedererkennung der Zirkone anhand der chemischen Zusammensetzung zu möglichen Muttergesteinen zeigen noch keine viel versprechenden Ergebnisse. Generell weisen die Zirkone eine magmatische granitoide Zusammensetzung kontinentalen Ursprungs auf. Eine Auffälligkeit stellen die erhöhten Spuren- und leichten Seltenenerdelemente in Zirkonen jeglicher Altersklassen dar. Nachfolgende Arbeiten müssen zeigen, wie und ob diese Anreicherungen Einfluss auf die chemische Zusammensetzung, die U-Pb Datierung und vor allem die Hf-Isotopie der Zirkone haben.
Der neoproterozoische Faltengürtel Kameruns (NFBC) ist durch Zahlreiche Pan- Afrikanische Plutone charakterisiert, die von krustalen Scherzonen durchsetzt werden. Der NFBC resultiert aus der Konvergenz des Westafrikanischen und des Kongo/Saõ-Francisco Kratons. Die Borborema Provinz (BOP) in NE-Brasilien wird als Äquivalent des NFBC angesehen. Bisher vorliegende Daten legen nahe dass die Borborema Scherzonen in kontinentaler Kruste durch dextrale Extrusion der BOP enstanden sind. Letztere wurde durch differentielle Bewegungen (Rotation induziert durch Subduktion und Kollision) des Kongo/Saõ- Francisco und des Westafrika-Kratons ausgelöst. Die Aktivität der Scherzonen fällt mit einer Hochtemperatur-Mittel- bis Niederdruckmetamorphose zusammen, welche mit partieller Aufschmelzung und Intrusion krustaler sowie Mantelschmelzen einhergeht. Die Bewegungen entlang dieser Scherzonen begannen zwischen 590 und 570 Ma und hielten bei abnehmender Temperatur bis etwa 500 Ma an. Ob die Scherzonen der BOP tatsächlich in den NFBC hineinreichen, war bisher nicht eindeutig geklärt. Die tektonometamorphe und magmatische Entwicklung des NFBC ist aufgrund fehlender struktureller, petrologischer und geochronologischer Daten kaum verstanden. Die vorliegende Arbeit befasst sich mit der Platznahme und Deformation der Plutone im Bereich des westlichen NFBC in der Region von Bafoussam-Batcha. Es wurden strukturelle Untersuchungen sowie U-(Th)-Pb Datierungen von Zirkon und Monazit durchgeführt. Die gewonnenen Daten werden mit bisher vorliegenden Daten aus den benachbarten Arealen des NFBC und aus äquivalenten Arealen Brasiliens verglichen. Innerhalb des NFBC lassen sich drei wesentliche proterozoische Gesteinseinheiten unterscheiden: (1) hoch-gradige metamorphe Komplexe mit palaeoproterozoischem Alter (Eburnium), bestehend aus Metasedimenten und Metaplutoniten, welche im Pan-Afrikanischen Granit-Batholith von Zentral-Kamerun vorkommen (in der Region von Bafia und Adamaoua); (2) einen Schiefer-Gürtel neoproterozoischen Alters, der die Becken von Poli, Lom und Yaoundé beinhaltet, und (3) Pan-Afrikanische (Meta-)Granitoide. Untersuchungen im nördlichen (Region von Poli), südlichen (Region von Yaoundé) und östlichen (Region von Lom-Ngaoundere) zeigen, dass die geodynamische Entwicklung durch Überschiebungs und Blatterverschiebungstektonik charakterisiert ist. Im nördlichen NFBC existieren E-W streichende, flach einfallende Foliationen, welche während der Überschiebung des NFBC auf den Kongo-Kraton entstanden. Im westlichen NFBC existieren vor allem geochemische und petrologische Daten. Die regionale Geologie wird hier durch Pan-Afrikanisches grundgebirge bestimmt, welches aus Graniten und Metamorphiten besteht, die wiederum von känozoischen Magmatiten (Granite, Vulkanite) durchsetzt bzw. überlagert werden. Vorhandene Daten zu Pan-Afrikanischen Plutonen des Untersuchungsgebiets und angrenzenden Regionen zeigen, dass in vielen Regionen ein große Variabilität hinsichtlich des Gesteinschemismus vorliegt, welche von basischen bis hin zu granitischen Gesteinen reicht, wobei der geochemische Charakter i.d.R. kalkalkalin bis alkalin ist. Das initiale Strontium-Verhältnis und Sm-Nd Daten einiger Granite indizieren eine Aufschmelzung im Mantel bei anschließender Kontamination durch kontinentale Kruste. Aufgrund der Anfälligkeit der Rb-Sr Methode existieren kaum verlässliche Alter von Granitoiden des NFBC. Durch die großen Fehler der Rb-Sr Alter sind neben den Platznahmealtern auch die Zeitpunkte der vorhandenen Wiederaufschmelzung weit gehend unbekannt. Durch detaillierte Geländearbeit gelang eine Gliederung des Areals in verschiedene Teilkomplexe. Diese sind der Migmatit-Komplex von Foumbot (MCF), der Bangwa-Komplex (BC), der Komplex von Chepang (CC) und der jüngeren Batié-Pluton (BP), welcher die übrigen Komplexe diskordant durchschlägt. Der BP selbst wird vom känozoischen Batcha Pluton durchsetzt. Innerhalb des MCF existiert eine bedeutende ENE-WSW streichende Scherzone. Im zentralen und südlichen Arbeitsgebiet reichen NE-SW streichende Scherzonen in den BP sowie in den CC und den BC hinein. Der MCF besteht aus Diatexit, Metatexit und Amphibolit. Merkmale wie Scherfaltung älterer Gefüge entlang ENE-WSW streichender Scherflächen und progressive Leukosombildung im Bereich der Faltenscharniere machen deutlich, dass partielle Aufschmelzung mit zunehmender Deformation einhergeht. Bereiche mit hoher Strain-magnitude zeigen koaxiale Plättung an. Die ENE-WSW verlaufende Scherzone weist dextrale Kinematik auf, wobei ältere sinistrale Bewegungen nicht ausgeschlossen werden können. Einzelzirkone von Diatexiten der MCF wurden mittels LA-ICPMS datiert. Mindestens drei Altersdomänen wurden dabei identifiziert: (a) elongierte bis gerundete Zirkon-Kerne mit Altern um 671 ±6 Ma; (b) oszillierend zonierte Zirkon-Mäntel, wahrscheinlich magmatischen Ursprungs, mit einem Alter von 639 ±5 Ma, interpretiert als das Intrusionsalter des Diatexits; (c) rekristallisierte Zirkon-Ränder mit einem Alter von 597 ±6 Ma, welches vermutlich die Metamorphose und Anatexis datiert. Der BC setzt sich aus unterschiedlich stark deformiertem Quarz-Diorit, Granodiorit, Syenogranit, Leucogranit und Monzonit zusammen. Quarz-Diorit und Granodiorit erscheinen in Form von cm- bis m-mächtigen foliierten Körpern. Die Foliation ist im Osten subhorizontal, gen Westen aber fällt sie zunehmend steil nach NE ein. Syenogranit und Leukogranit bilden größere Körper und weisen eine steile, nach NE einfallende, submagmatische Foliation auf. Innerhalb der (Syeno)granite weisen kristallplastische Verformung und Rekristallisation von Feldspat sowie vorhandene S-C Gefüge auf eine Deformation im Subsolidusbereich, d.h. während der Abkühlung, hin. Die aus den Mikrogefügen abgeleiteten Deformationsmechanismen charakteristischer Minerale der Quarz-Diorite und Granodiorite deuten hingegen auf Verformung unter Bedingungen einer hoch- und niedriggradigen Metamorphose hin. Innerhalb NE-SW verlaufender Mylonite am Kontakt BC/BP wird ein dextraler Schersinn durch S-C Gefüge angezeigt. In den zentralen Bereichen des BC sind Überprägungen sinistraler durch dextrale Scherzonen hingegen nur lokal sichtbar. Die Phengit-Zusammensetzung deformierter Gesteine deutet auf Scherung bei einem Maximaldruck von ca. 4.5 kbar bei T = ca. 500 °C hin. Die östlichen Nebengesteine des BC in der Region von Maham sind Migmatite, deren subhorizontale Foliation in zunehmendem Maße in wenige cm bis einige m mächtige ENE-WSW streichende Scherzonen übergeht. Die Gefüge der Migmatite der Region von Maham und (grano)dioritischer Gesteine des BC deuten auf eine regionale Überschiebungstektonik mit SSE gerichtetem Deckentransport hin. Die Zirkon- und Monazitalter deuten auf zwei Altersgruppen innerhalb des BC hin mit jeweils unterschiedlichen Platznahmealtern. Die ältere Gruppe besteht aus Quarzdiorit (643 ±5 Ma und 641 ±4 Ma, LA-ICPMS Daten, U-Pb Zirkonalter) und Granodiorit (638 ±2 Ma, IDTIMS Daten; 641 ±8 Ma und 641 ±2 Ma, LA-ICPMS Daten; U-Pb Zirkonalter), die jüngere Gruppe umfasst Syenogranit (598 ±21 Ma, 605 ±11 Ma, EMP Daten, U-Th-Pb Monazitalter) und Leukogranit (607 ±3 Ma und 603 ±4 Ma, LA-ICPMS Daten; U-Pb Zirkonalter). 206Pb/238U Alter zwischen 656 ±9 Ma und 718 ±13 Ma wurden an Zirkonkernen des Granodiorits bestimmt. Eine Regressionsgerade durch alle analysierten Kerne ergibt ein oberes Schnittpunktalter von 672 ±8 Ma. Der CC wird von im m-Maßstab wechselnden Lagen dioritischer und granitischer Zusammensetzung aufgebaut. Eine mylonitische Foliation streicht NE-SW. S-L-gefüge und Quarz-[c]-Achsen Verteilungen weisen auf Plättung unter hochgradigen Bedingungen (T = 650 °C) hin. Phengit-Barometrie mylonitisierter Granite ergibt einen Maximaldruck von 6 kbar bei T = ca. 500°C. Radiometrische Untersuchungen des mylonitischen Granits des CC wurden mittels LAICPMS an Zirkon und Monazit sowie mit Elektronenstrahlmikrosonde (EMP) an Monazit durchgeführt. Das EMP Monazit Alter (621 ±33 Ma) und LA-ICPMS Alter (622 ±13, oberes Schnittpunktalter; 611 ±4 und 608 ±6 Ma, gewichtete Mittelwerte der 208Pb/232Th und 207Pb/238U Alter) stehen im Einklang mit dem konkordanten LA-ICPMS Zirkonalter (611 ±5 Ma). Letzteres wird als Intrusionsalter des Granits interpretiert. Der BP wird im Wesentlichen von mittel- bis grobkörnigem Syenogranit aufgebaut. Speziell im Randbereich werden magmatische Gefüge (Fließgefüge, Aggregate von xenomorphem Quarz) durch submagmatische Gefüge überprägt und schließlich ersetzt (kristallplastische Deformation und Rekristallisation von Quarz und Feldspat, Bildung von Myrmekiten und S-C Gefügen). Sowohl die vom magmatischen bis in das Subsolidus-Stadium anhaltende Deformation, als auch die Parallelität der steil einfallenden postmagmatischen Foliation im Randbereich des BP und den angrenzenden BC, CC und MCF weisen auf eine synkinematische Platznahme des BP entlang krustaler Blattverschiebungen hin. Ein Konkordiaalter von 602 ±1.4 Ma wurde mit der ID-TIMS Methode erhalten. Mittels LAICPMS wurde ein Alter von 599 ±13 Ma (oberes Schnittpunktalter) bestimmt, welches im Fehler dem ID-TIMS Konkordia-Alter gleicht. Letzteres wird als Platznahmealter interpretiert. Die Kombination geochronologischer und struktureller Daten erlaubt die Unterscheidung von insgesamt drei tektono-magmatischen Abschnitten: Phase I ist durch die Platznahme dioritischer und granodioritischer Gesteine des BC sowie der Protolithe der Migmatite des MCF bei etwa 640 Ma charakterisiert. Während Phase II bei ca. 607 Ma intrudierten Syenogranit und Leukogranite in den BC und der Granits des CC. Gleichzeitig unterlagen die 640 Ma alten Granite einer hochgradigen Metamorphose. Die Intrusion der 607 Ma alten Plutonite geht einher mit einem Wechsel von Überschiebungstektonik hin zu sinistraler Blatterverschiebungstektonik. Die Platznahme des porphyritischen Syenogranits von Batié vor ca. 600 Ma, welche dextrale Bewegungen im Randbereich des BP und unmittelbar angrenzender Nebengesteine auslöste, stellt die dritte tektono-magmatische Phase dar. Alter von 700 bis 660 Ma, bestimmt an Zirkonkernen der Migmatite des MCF und der Granodiorite des BC, indizieren eine Platznahme der ältesten Granite in Pan-Afrikanischem Basement. Einige ererbte Zirkonkerne paläoproterozoischen Alters innerhalb des Leukogranits des BC deuten auf die Beteiligung Eburnischer Kruste in der Entwicklung der Pan-Afrikanischen Granite hin. Die neuen Daten bestätigen bisherige Vermutungen, dass der westliche NFBC ein afrikanisches Äquivalent zur Borborema Provinz Brasiliens darstellt. Auffällig sind geochronologische Übereinstimmungen bei den (Meta)granitoiden und den prä- bis synkinematischen Brasiliano Granitoiden der Borborema Provinz. Auf der anderen Seite ist speziell in der späten Entwicklung ab ca. 600 Ma die Kinematik blattverschiebender Bewegungen teilweise unterschiedlich. Eine mögliche Ursache sind lokale Variationen im Stressfeld, bedingt durch die Platznahme der syn- bis spät-tektonischen Magmatite.
This thesis deals with the analysis of “presolar” silicates and oxides by high resolution mass spectrometry and electron microscopy techniques. This “stardust” was identified by its extreme oxygen isotopic anomalies, which point to nucleosynthetic reactions in stellar interiors, in the carbonaceous chondrite Acfer 094. Isotopic, chemical and mineralogical studies on these stardust grains therefore allow the testing of astrophysical questions on Earth, which are otherwise only accessible by spectroscopy and theoretical models. The class of presolar silicates has been identified only six years ago in 2002, although it was known already from spectroscopic observations that silicates represent the most abundant type of dust in the galaxy. The development of the “NanoSIMS” was a crucial step in this respect, because this ion probe with its superior spatial resolution of only 50 nm allowed the detection of the typically 300 nm sized presolar silicates. A total of 142 presolar silicates and 20 presolar oxides were identified within Acfer 094, whose matrix therefore contains 163 ± 14 ppm presolar silicates and 26 ± 6 ppm presolar oxides. This is among the highest amounts reported so far for any primitive solar system material. The majority of detected stardust grains derive from asymptotic giant branch stars of 1 – 2.5 Msun and close-to-solar or slightly lower-than-solar metallicity. However, by measuring the Si isotopic compositions of some enigmatic grains, it could be shown that there is a sub-class of presolar silicates characterized by an extreme enrichment of 17O and a moderate enhancement of 30Si relative to solar, whose origins might be explained by formation in binary stellar systems. About 10% of all grains exhibit an enrichment in 18O and some of them also of 28Si relative to solar, which most likely point to an origin in type II supernova explosions. The Si isotopic measurements also allowed to quantify the effect of the s-process on the Si isotopes in low-mass asymptotic giant branch stars. The results agree well with theoretical predictions. The grains were furthermore characterized by SEM and the chemistries of about half of the grains were determined by Auger electron spectroscopy. The majority of grain morphologies are consistent with what is expected from condensation experiments. However, a lot of grains are altered by Fe-rich minerals, which are either of primary condensation or of secondary ISM or solar nebula origin. Furthermore, complex presolar grains consisting of refractory Al-rich grains attached to silicate material could be identified, which have been predicted by condensation theory and observational evidence. Nine presolar silicates were analyzed by combined NanoSIMS/TEM studies. The majority of grains are Mg-rich and amorphous, which is in contrast to astrophysical evidence, which mainly postulate crystalline Mg-rich and amorphous Fe-rich circumstellar condensates. However, the grains might have been rendered amorphous by secondary processes in the ISM or could have condensed under non-equilibrium, low-temperature conditions in the circumstellar outflow. The grains are more likely characterized by a variable, pyroxene-like chemistry, which could be a result of sputtering in the ISM, which preferentially removes Mg. The detected crystalline presolar silicates in this study and in other work are all olivines, whereas grains with a pyroxene stoichiometry are all amorphous except one. This supports astrophysical models which point to different formation pathways for these two types of grains and therefore different crystallinity. However, the relatively high Fe content of three detected presolar olivines in this study and in other work is in contrast to astrophysical evidence and theoretical considerations, which predict essentially Fe-free crystalline grains. It is therefore possible that the infrared spectra might also be compatible with less Mg-rich olivines. The only crystalline presolar silicate with a pyroxene-like stoichiometry is the unusual grain 1_07: although it is chemically enstatite, the electron diffraction pattern could only be indexed to silicate perovskite, which is stable above ~23 GPa. The discovery of a high-pressure phase of presolar origin shows that dust grains encountering interstellar shocks might not necessarily be completely destroyed. In astrophysical models it is in principle also possible that a fraction of larger grains might survive such a shock wave encounter as a high-pressure modification, which is supported by this discovery.
The present study was elaborated within the scope of the INTAFERE (Integrated Analysis of Mobile Organic Foreign Substances in Rivers) project which investigates the occurrence of xenobiotics in small freshwater streams with particular consideration of social impact factors. The aim of this study is to investigate the seasonal and spatial variance of organic micropollutants in small fresh water streams and to identify possible sources and sinks. Therefore four small freshwater river systems in Hesse, Germany, have been investigated with respect to common organic pollutants such as: the organophosphates tri-n-butyl phosphate (TBP), tris(2-butoxyethyl)phosphate (TBEP), tris(2-chloroethyl)phosphate (TCEP), tris(1-chloro-2-propyl)phosphate (TCPP), and tris(1,3-dichloro-2-propyl)phosphate (TDCPP), the synthetic musk fragrances 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexa-methylcyclopenta-[g]-2-benzopyran (HHCB) and 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), the endocrine disruptors bisphenol A (BPA), 4-tert-octylphenol (OP) and the technical isomer mixture of 4-nonylphenol (NP), the herbicide terbutryn [2-(t-butylamino)-4-(ethylamino)-6-(methylthio)-s-triazine] as well as the insect repellent N,N-diethyl-m-toluamide (DEET). Water samples were collected in the time span from September 2003 to September 2006 at 26 sampling locations. The samples were extracted with solid phase extraction (SPE) and analyzed by coupled gas chromatography-mass spectrometry (GC-MS). For quantification the internal standard method was used. The results of the study showed an ubiquitous occurrence of organic pollutants in the fresh water streams of the study area. The organophosphates have been detected in 90 % of the water samples with mean concentrations of 502 ng/l (TCPP), 276 ng/l (TBP), 183 ng/l (TBEP), 118 ng/l (TCEP) and 117 ng/l (TDCPP). Sewage treatment plant (STP) effluents were identified as the dominating source for the chlorinated organophosphates as well as for the synthetic musk fragrances and the insect repellent DEET in the river systems. Consequently the highest concentrations were observed in the Schwarzbach system characterized by the highest proportion of waste water compared to the other river systems. Mean concentration levels of the synthetic musk fragrances HHCB and ATHN were 141 ng/l and 46 ng/l, respectively and 124 ng/l in case of DEET. The synthetic musk fragrances showed a clear seasonal trend with significantly lower concentrations in summer times compared to winter times, which is ascribed to stronger photodegradation and volatization during summer times. In contrast, mean DEET concentrations and loads were significantly higher in summer than in autumn, winter and spring, in parallel with the main insect season. The concentrations of the endocrine disruptors BPA, NP and OP in the river water samples ranged from <20 ng/l to 1927 ng/l, <10 ng/l to 770 ng/l, and <10 ng/l to 420 ng/l, respectively. Whereas OP was present in about 2/3 of the samples, NP and BPA could only be detected in 56% and 13% of the water samples, respectively. BPA levels exceeded in two samples the predicted no-effect concentration (PNEC) for water organisms. In case of NP, highest concentrations and loads were found in September 2003 and decreased significantly since then. In contrast, concentrations and loads of OP which serves in a similar application field remained nearly constant during the sampling period. The decrease of NP can be attributed to the implementation of the European Directive 2003/53/EG, which restricts the use of nonylphenols and nonylphenol ethoxylates since January 2005. However, at the end of the sampling period in September 2006, NP could still be detected at mean concentrations of 18 ng/l in the river waters of the sampling area. Furthermore, absence of NP in several samples from associated STP effluents indicate that the STPs cannot be the only sources for NP found in the river water. The herbicide terbutryn was present in the rivers during the whole sampling period from September 2003 to September 2006 despite a ban on its use as a herbicide from January 2004 on. Terbutryn levels ranged from < 4 ng/l to 5600 ng/l, showing a clear spatial pattern with high terbutryn concentrations in the Weschnitz and Modau river systems and significantly lower terbutryn levels in Schwarzbach and Winkelbach. Results from the analysis of two STP effluents discharging into the Weschnitz and the Modau, respectively, indicate that terbutryn enters the rivers from this source. Furthermore, terbutryn concentrations and loads showed a clear seasonal trend with significantly higher levels in summer and autumn. Obviously, the ban on agricultural use of terbutryn at the end of 2003 had no discernable influence on terbutryn concentration in the rivers because there was no trend of decreasing.
The development of benthic foraminiferal assemblages during the past 6,000 yrs was investigated in Holocene sediment cores from three carbonate platforms (Turneffe Islands, Lighthouse Reef, and Glovers Reef) of Belize, Central America. Foraminiferal assemblages and their diversity were determined in different time periods to identify their dependence on environmental factors, such as lagoonal age, lagoonal depth, water circulation, substrate, bottom-water temperature, and salinity. Geochemical proxies (δ18O and δ13C), obtained from the common larger foraminifer Archaias angulatus were used to estimate Holocene seasonal BW-temperatures and climate variabilities. A total of 51 samples were taken from 12 vibracores for taxonomic determination and 10 to 15 subsamples of 32 tests of Archaias angulatus were used for stable oxygen and carbon isotope analyses. Based on cluster analyses, seven benthic foraminiferal assemblages are distinguished during the Holocene. The three platforms exhibit characteristic differences in benthic foraminiferal fauna and diversity, which are controlled by their respective environments during the last 6,000 yrs. Turneffe Islands has four benthic foraminiferal assemblages, which are typical for restricted lagoons with fluctuating salinity. Lighthouse Reef is inhabited by two benthic foraminifera associations, which are characteristic of high water exchange with the surrounding ocean and clear waters. Glovers Reef is characterized by two benthic foraminiferal assemblages, which occur in deeper lagoons with slow water circulation. In general, during the Holocene, the highest mean diversity, evenness, and richness of benthic foraminifera were found in the Turneffe Islands and the lowest occurred at Glovers Reef. The foraminiferal faunas of the Lighthouse and Glovers Reefs had been in a “Diversification Stage” since 6,000 yrs, whereas the foraminiferal fauna of the Turneffe Islands reflects the development from a “Colonisation” (~4,000 yrs BP) to a “Diversification Stage” (~2,000 yrs to present time). Lagoonal depth, water circulation, substrate, and BW-temperature have higher influence on foraminiferal diversity as compared to lagoonal size and age. The negative correlation between diversity and lagoonal depth is based on differences in light intensity and substrate. In contrast to Lighthouse Reef, the Turneffe Islands and Glovers Reef show decreasing diversity of benthic foraminifera with increasing lagoon depth, due to finer sediment, turbid waters and/or dense mangrove growth, which reduce the light intensity and the number of species. Water Circulation also affected the benthic foraminifera modes of living and their diversity during the last 6,000 yrs. Increasing abundances of infaunal taxa refer to restricted circulation and/or lower oxygen conditions, as assumed for the Turneffe Islands and Glovers Reef. Increasing abundances of epifaunal foraminifera, as observed in the Lighthouse Reef indicate better circulation and/or higher oxygen conditions. Holocene BW-temperature reconstructions based on δ18O of single Archaias angulatus tests do not correspond to typical Holocene climate models of the Caribbean. In the Belize area, mean BW-temperature trends indicate local climate variations. A decrease of δ13C values during the last 1,000 yrs could be related to the “Suess Effect”. The seasonal BW-temperature variations within single large benthic foraminifera tests correspond to present-day temperature fluctuations in the lagoons, and indicate higher temperatures in Summer and Autumn and lower temperatures in Winter and Spring.
The purpose of this study was to reconstruct the depositional environment, the genesis and the composition of Miocene coals in the Kutai Basin, East Kalimantan, Indonesia and to improve our understanding of the factors controlling the organic and inorganic composition, variation of biomarkers, and the peat forming vegetation of the coals. To achieve the aim methods belonging to three different disciplines were applied: 1. Coal petrology (chapter 3) 2. Inorganic geochemistry: sulfur, pyrite and mineral matter distributions (chapter 4) 3. Organic geochemistry of saturated, aromatic hydrocarbon fractions and stable carbon isotopic composition (chapter 5 and 6) Coal petrology Coal developes from peat deposited in mires, mainly in swamps and raised bogs. It is therefore necessary to consider how peat was formed in the past. Coal contains a variety of plant tissues in different degrees of preservation. Tissues of distinct origin are microscopically identifiable and can frequently be related to certain parts of the plant, such as cuticles, woody structures, spores, algal, resin, etc. Together with the particles of less certain origin they are termed macerals which are the petrographic components of coal. During and after deposition of plant remains in sedimentary basins, the organic matter will undergo a sequence of physical, biochemical and chemical changes, which finally results in the formation of coals of increasing rank depending mainly on the temperature influence. The process of coalification begins with practically unaltered plant material and peat, and continues with increasing rank through brown coal, bituminous coal, and finally to anthracite as well as graphite. Coal petrography provides valuable of data of maceral and mineral percentages with reflectance values, which can be used to reconstruct the depositional environment and the coalification processes. In lower rank coals, the material is represented by a group of macerals called huminite, and in bituminous and anthracite coals by a group of macerals called vitrinite. Coal petrography analyses have been carried out on samples from some Miocene coal seams from Kutai Basin. The study has shown that huminite reflectance values of coal samples from ...
In vorliegender Studie wurde lebend und tot gesammeltes Schalenmaterial der Europäischen Flussperlmuschel Margaritifera margaritifera verschiedener Lokalitäten in Schweden, Finnland und Deutschland (bzw. Frankreich) sklerochronologisch und isotopengeochemisch untersucht. Sauerstoffisotopen-Zeitreihen, trendbereinigte und standardisierte stabile Kohlenstoffisotopen-Zeitreihen (SSCI) sowie jährliche Zuwachsraten (SGI-Zeitreihen) jeder der acht Populationen sind zu Compound-Chronologien zusammengefasst und auf Zusammenhänge mit Temperatur, Sonnenflecken-Zyklen und Niederschlag untersucht sowie auf Korrelationen mit verschiedenen Klimaindizes (z.B. dem Dipol der Meeres-Oberflächenwasser Temperatur-Anomalien im Nordatlantik, NADP-SST, und der Nordatlantischen Oszillation, NAO) getestet worden. Im Vergleich ergaben sich für die geglätteten Zeitreihen (25-Jahresfilter) Korrelationskoeffizienten von r = 0,57 (SGI Master-Chronologie und NAO) bzw. r = 0,59 (Master-Chronologie) und NADP-SST. Obwohl weder Isotopendaten noch Zuwachschronologien der Muscheln auf hochfrequenten Signalen hohe Korrelationen mit instrumentellen Messdaten aufweisen, sind dekadische Klimaoszillationen deutlich repräsentiert. Mit zunehmendem Lebensalter nimmt der Schalenzuwachs exponentiell ab. Gleichzeitig nähern sich die d13C-Werte der Schale dem d13CDIC-Wert des Wassers, der bei den hier untersuchten Lokalitäten zwischen -9,3 ‰ und -12,7 ‰ lag. Erst im hohen Lebensalter findet also die Schalenbildung nahezu im kohlenstoffisotopischen Gleichgewicht mit dem umgebenden Medium statt. In der Jugend der Tiere hingegen wirken sich lokalitätsspezifische Trends aus. Extrinsische Faktoren führen zu drei Mustern: 1) Trends hin zu stärker negativen d13C-Werten (um etwa -4,5 ‰) in den Bächen Nuortejaurbäcken (NJB) und Grundträsktjärnbäcken (GTB), 2) Trends hin zu weniger stark negativen d13C-Werten (um etwa +4,5 ‰) in den großen Flüssen (GJ: Görjeån, NWS: Tarn/Frankreich) und 3) Schwankungen um etwa ±1,5 ‰ um einen Mittelwert (RG: Regnitz). Der Einfluss auf die d13C-Trends könnte möglicherweise in Veränderungen der Bioproduktivität begründet sein, da sich diese unmittelbar auf den DIC-Pool des umgebenden Milieus und des Habitats auswirkt. In den Sauerstoffisotopen spiegelte sich die geographische Herkunft des untersuchten Materials wider. Die Chronologien der am nördlichsten gelegenen Populationen wiesen d18OMittelwerte von -11,5 ‰ (GJ), bzw. -9,5 ‰ (NJB, GTB) auf, die RG-Chronologie von -7,9 ‰ und die Zeitreihe der NWS von -5,3 ‰. Im Gegensatz zu anderen Arbeiten zeigten die untersuchten Individuen jedoch keinen statistischen Zusammenhang mit annuellen Temperaturdaten. Als beeinflussende Faktoren kommen die Schneeschmelze und die isotopengeochemische Ausprägung des Habitats (See, Fluss, Bach) in Frage. Eine sehr hohe Korrelation von r = -0,74 (25-Jahresfilter) wurde zwischen der Görjeån-Chronologie (d18OAragonit) und Niederschlagsraten für das in der Nähe des Flusses gelegene Jokkmokk festgestellt.
A graph theoretical approach to the analysis, comparison, and enumeration of crystal structures
(2008)
As an alternative approach to lattices and space groups, this work explores graph theory as a means to model crystal structures. The approach uses quotient graphs and nets - the graph theoretical equivalent of cells and lattices - to represent crystal structures. After a short review of related work, new classes of cycles in nets are introduced and their ability to distinguish between non-isomorphic nets and their computational complexity are evaluated. Then, two methods to estimate a structure’s density from the corresponding net are proposed. The first uses coordination sequences to estimate the number of nodes in a sphere, whereas the second method determines the maximal volume of a unit cell. Based on the quotient graph only, methods are proposed to determine whether nets consist of islands, chains, planes, or penetrating, disconnected sub-nets. An algorithm for the enumeration of crystal structures is revised and extended to a search for structures possessing certain properties. Particular attention is given to the exclusion of redundant nets and those, which, by the nature of their connectivity, cannot correspond to a crystal structure. Nets with four four-coordinated nodes, corresponding to sp3 hybridised carbon polymorphs with four atoms per unit cell, are completely enumerated in order to demonstrate the approach. In order to render quotient graphs and nets independent from crystal structures, they are reintroduced in a purely graph-theoretical way. Based on this, the issue of iso- and automorphism of nets is reexamined. It is shown that the topology of a net (that is the bonds in a crystal) constrains severely the symmetry of the embedding (that is the crystal), and in the case of connected nets the space group except for the setting. Several examples are studied and conclusions on phases are drawn (pseudo-cubic FeS2 versus pyrite; α- versus β- quartz; marcasite- versus rutile-like phases). As the automorphisms of certain quotient graphs stipulate a translational symmetry higher than an arbitrary embedding of the corresponding net would show, they are examined in more detail and a method to reduce the size of such quotient graphs is proposed. Besides two instructional examples with 2-dimensional graphs, the halite, calcite, magnesite, barytocalcite, and a strontium feldspar structures are discussed. For some of the structures it is shown that the quotient graph which is equivalent to a centred cell is reduced to a quotient graph equivalent to the primitive cell. For the partially disordered strontium feldspar, it is shown that even if it could be annealed to an ordered structure, the unit cell would likely remain unchanged. For the calcite and barytocalcite structures it is shown that the equivalent nets are not isomorphic.
High field strength element systematics and Lu-Hf & Sm-Nd garnet geochronology of orogenic eclogites
(2008)
Concerning the Bulk Silicate Earth (BSE), the depleted mantle and the continental crust are thought to balance the budget of refractory and lithophile elements, resulting in complementary trace element patterns. However, the two high field strength elements (HFSE) Niob and Tantal appear to contradict this mass balance. All reservoirs of the silicate Earth exhibit subchondritic Nb/Ta ratios, possibly as a result of Nb depletion. The two HFSE Zr and Hf on the other hand seem not to be fractionated between the silicate reservoirs. They show more or less chondritic Zr/Hf ratios. In this study a series of orogenic eclogites from different localities was analyzed to determine their HFSE concentrations and to contribute to the question if eclogites could form a hidden reservoir to account for the mass imbalance of the BSE. The results show that the orogenic eclogites have subchondritic Nb/Ta ratios and near chondritic Zr/Hf ratios. The investigated eclogites show no fractionation of Nb/Ta ratios and no enrichment of Nb compared to e.g. MOR-basalts, the likely precursor of these rocks. With an average Nb/Ta ratio of 14.9 these eclogites could not balance the differences between BSE and chondrite. Additionally, with an average Nb/Ta ≈ MORB they also cannot balance the small differences in the Nb/Ta of the crust and the mantle. LA-ICPMS analyses of rutiles in these eclogites reveal a zonation of Nb/Ta ratios in this mineral, with rutile cores having higher Nb/Ta than rutile rims. As a consequence, Laser Ablation data of rutiles have to be evaluated carefully and cannot necessarily reflect a bulk rock Nb and Ta composition, although over 90% of these elements reside in rutile.
Für die Analyse klimagesteuerter terrestrischer und mariner Ökosystemdynamik im Spätglazial und Holozän des Ägäisraums wurden terrestrische (Pollen und Sporen) und marine Palynomorphe (organischwandige Dinoflagellatenzysten) aus einem marinen Kern des Berg-Athos-Beckens hochauflösend (d.h. in einer zeitlichen Auflösung zwischen ~30 und ~200 Jahren) untersucht. Darüber hinaus wurden Pollen und Sporen eines terrestrischen Kerns aus dem Drama-Becken (nördliches Hinterland der Ägäis) analysiert. Neben der qualitativen Analyse wurden mit Hilfe der Technik der modernen Analoge quantitative Rekonstruktionen der Paläotemperaturen und -niederschläge im terrestrischen Raum vorgenommen. Für den marinen Kern wurden außerdem Sedimenthelligkeit, Sauerstoffisotopie und magnetische Suszeptibilität untersucht. Über die Entwicklung eines konsistenten Altersmodells für beide Kerne konnten Aussagen über eine regionale, klimagesteuerte Differenzierung zwischen der Vegetationsentwicklung im Küstenbereich und der Vegetationsentwicklung in intramontanen Ökosystemen getroffen werden. Während des Pleniglazials (~21 ka bis ~14,7 ka BP) herrschten im nördlichen Ägäisraum kühle und vor allem trockene Bedingungen vor. Offen liegende Schelfflächen wurden von einer Pinus-dominierten Vegetation besiedelt, bis der Schelf während des anschließenden Meiendorf-Bølling-Allerød-Interstadialkomplexes (~14,7 ka bis ~12,7 ka BP) durch den Schmelzwasserpuls MWP-1A überflutet wurde. Während des Meiendorf-Bølling-Allerød-Interstadialkomplexes herrschten im nördlichen Ägäisraum etwas humidere Bedingungen als während des Pleniglazials. In der anschließenden Jüngeren Dryas (~12,7 ka bis ~11,7 ka BP) war das Klima hingegen mindestens ebenso arid und die Oberflächenwassertemperaturen in der Nordägäis fast ebenso gering wie während des Pleniglazials. Das lokale Klima im Drama Becken war von ~21 ka BP bis zum Ende der Jüngeren Dryas generell trockener als die allgemeinen Klimabedingungen im nördlichen Ägäisraum. Die Vegetationsentwicklung im nördlichen Ägäisraum wurde während des Spätquartärs vor allem durch die zur Verfügung stehende Feuchtigkeit gesteuert. Auch nach der Jüngeren Dryas war die Humidität im Ägäisraum zu gering, um eine Wiederbewaldung zu ermöglichen, wie sie in Mitteleuropa und dem westlichen Mittelmeergebiet bereits ab ~11,6 ka BP stattfand. Ein Vegetationsrückschlag um ~11,0 ka BP korreliert mit der aus Mitteleuropa bekannten präborealen Oszillation bzw. dem 11,2-ka-Klimaereignis. Die holozäne Wiederbewaldung setzte im östlichen Ägäisraum erst ab 10,2 ka BP ein; sie wurde durch einen sukzessiven Anstieg der Winterniederschläge von ~225 auf über ~300 mm/Jahr ermöglicht. Sowohl dieser Anstieg der Winterniederschläge als auch ihr Rückgang nach 7,0 ka BP sind eng mit der Ablagerung des Sapropels S1 (zwischen ~9,6 ka und ~7,0 ka BP) verknüpft. Die relativ humiden und milden Winterbedingungen während der Ablagerung des S1 wurden von durch Vegetationsrückschläge dokumentierten, kurzfristigen Klimaereignissen bei ~9,3 ka, ~8,7 ka, ~8,2 ka und ~7,6 ka BP unterbrochen. Diese kurzfristigen Klimaereignisse gehen mit Unterbrechungen bzw. Abschwächungen der S1-Bildung einher. Besonders ausgeprägt ist der regionale Ausdruck des 8,2-ka-Ereignisses, welches für die am stärksten ausgeprägte und auch aus anderen Bereichen des östlichen Mittelmeers überlieferte Unterbrechung des S1 zwischen ~8,4 ka und ~8,0 ka verantwortlich zeichnet. Während der Bildung des S1 wurde die Klimaentwicklung im Ägäisraum generell weniger vom Klimasystem der hohen Breiten beeinflusst als vielmehr vom Monsunsystem der niederen Breiten. Allerdings war die Intensität des Sibirischen Hochs während des frühen Holozäns und nach dem S1-Intervall ein wichtiger Faktor für das Winterklima. Auch während des Holozäns wurden Klimaschwankungen im Drama-Becken deutlicher von der lokalen Vegetation reflektiert als von der Vegetation des nördlichen Ägäisraums im Allgemeinen. So wirkte sich z.B. das 8,2-ka-Ereignis sehr stark auf die Vegetationsentwicklung im Drama Becken aus; es verursachte einen Rückgang der Sommer- und Wintertemperaturen um mehr als 3° C. Dieser starke Temperatureinbruch ist auf lokale mesoklimatische Effekte zurückzuführen. Die Vegetation in den Randbereichen der Ägäis erfuhr weitere Rückschläge bei ~6,5 ka, ~5,6 ka und ~4,3 ka BP. Die Einbrüche bei ~5,6 ka und ~4,3 ka BP sind mit rapiden Klimaänderungen in großen Teilen der Nordhemisphäre korrelierbar, die ebenso wie die Jüngere Dryas und das 8,2-ka-Klimaereignis Einfluss auf Hochkulturen in Nordostafrika und im Mittleren Osten hatten. Die aus dem Holozän überlieferten Klimadaten machen deutlich, dass dieser Zeitraum von einer weitaus stärkeren Klimavariabilität geprägt wurde als noch bis vor kurzem angenommen.
Im Rahmen des Projektes SPURT (Spurenstofftransport in der Tropopausenregion) als Teil des deutschen Atmosphärenforschungsprogramms AFO 2000 wurden bei 8 Messkampagnen mit insgesamt 36 Flügen innerhalb eines Beobachtungszeitraums von zwei Jahren (Nov. 2001 bis Juli 2003) Spurengasmessungen in dem Breitenbereich zwischen 35°N und 75°N durchgeführt. Für die Messungen der Spurengase N2O, F12, SF6, H2 und CO wurde der vollautomatisierte in-situ GC (Gaschromatograph) GhOST II (Gas Chromatograph for the Observation of Stratospheric Tracers) entwickelt und eingesetzt. Das Ziel dieser Messungen war die Untersuchung der jahreszeitlichen Variabilität der Spurengase in der oberen Troposphäre und untersten Stratosphäre (UT/LMS: Upper Troposphere/Lowermost Stratosphere), um die Transport- und Austauschprozesse in der Tropopausenregion besser zu verstehen. Zur Untersuchung von Transport und Mischung in der UT/LMS wurden die Rückwärtstrajektorien entlang der Flugpfade, die Verteilungen der Tracer N2O, F12, SF6, CO und CO2 (MPI für Chemie in Mainz), die Tracer/Tracer-Korrelationen N2O/F12, N2O/O3 F12/O3 und SF6/O3 und die Verteilungen des aus SF6-Messungen berechnete mittlere Alters der Luft herangezogen. Zusätzlich wurden die simultanen Messungen der beiden Alterstracer CO2 und SF6 genutzt, um die Propagation der Amplitude des troposphärischen CO2-Jahresgangs in die LMS zu bestimmen und daraus mit Hilfe eines empirischen Altersspektrums den Eintrag und die mittlere Transportzeit aus der Troposphäre in die unterste Stratosphäre zu quantifizieren. Grundsätzlich muss die LMS in zwei Bereiche eingeteilt werden – die Übergangsschicht („tropopause following layer“) bis etwa 20-30 K über der potentiellen Temperatur der lokalen Tropopause [Hoor et al., 2004] und die freie LMS oberhalb dieser Schicht. Als wesentliche Unterscheidungsmerkmale beider Bereiche wird die mittlere Transportzeit des Eintrags troposphärischer Luft identifiziert. Aus Trajektorienuntersuchungen und Tracerverteilungen (Kap. 3.4) kann gezeigt werden, dass der Transport in die Übergangsschicht und die Mischungsprozesse in diesem Bereich auf der Zeitskala der mesoskaligen troposphärischen Prozesse ablaufen. Im Gegensatz dazu werden aus der Massenbilanz (Kap. 5.3) mittlere Transportzeiten aus der Troposphäre in die freie LMS von einigen Wochen bis zu mehreren Monaten abgeleitet. Außerdem konnte nachgewiesen werden, dass der troposphärische Eintrag in der freien LMS fast ausschließlich auf quasihorizontale isentrope Einmischung aus den Tropen über die Transportbarriere des Subtropenjets zurückzuführen ist. Nur im Sommer und Herbst konnte auch oberhalb der Übergangsschicht für einzelne Messungen ein Einfluss aus der extratropischen Troposphäre beobachtet werden. Die in dieser Arbeit untersuchten Tracerverteilungen und -korrelationen (Kap. 4) und die Verteilung des mittleren Alters (Kap.5.2) in der LMS zeigen einen Jahresgang mit einem maximalen troposphärischen Einfluss im Oktober und einem maximalen stratosphärischen Einfluss im April. Diese saisonale Charakteristik in der freien LMS kann durch die saisonalen Änderungen des Verhältnisses von Abwärtstransport aus der Overworld und quasihorizontalem Transport aus den Tropen und durch die mit den jeweiligen Transportprozessen assoziierte mittlere Transportzeiten erklärt werden, die aus Massenbilanzrechnungen bestimmt wurden. Es wird gezeigt, dass der überwiegende Eintrag von troposphärischer Luft in die LMS im Sommer und Herbst stattfindet, wobei im Mittel die kürzesten mittleren Transitzeiten (unter 0.3 Jahre) für den August und die längsten Transitzeiten (über 0.6 Jahre) für den Mai berechnet werden. Aus den Ergebnissen wird gefolgert, dass ein ausgeprägter isentroper Austauschprozess über den Subtropenjet im Sommer bis in den Herbst hinein der dominierende troposphärische Einfluss in der LMS bis in den Mai ist. Der Vergleich zwischen SPURT und anderen in der UT/LMS im Zeitraum von 1992 bis 1998 durchgeführten Messkampagnen zeigt einen systematischen Unterschied in den N2O/O3-Korrelationen. Die Zunahme von O3 relativ zu N2O in der LMS ist um etwa 6.5 ppb O3 pro 1 ppb N2O bzw. etwa 40% größer als die Zunahme bei jahreszeitlich vergleichbaren früheren Kampagnen. Durch eine weitergehende Analyse der Messungen, z.B. durch den Vergleich der N2O-Verteilungen in der LMS bei verschiedenen Messkampagnen, und zusätzlichen Informationen aus Satelliten- und Ballonmessungen wird abgeleitet, dass diese Änderung der N2O/O3-Korrelationen im Wesentlichen auf einen im Zeitraum von SPURT stärkeren quasihorizontalen Transport aus den Tropen in die Extratropen im Bereich des so genannten „tropical controlled transition layer“ [Rosenlof et al., 1997] zwischen 16-21 km (bzw. Θ ≈ 380-450 K) zurückzuführen ist. In Kooperation mit B. Bregman wurden mit dem Chemie-Transport-Modell TM5 des KNMI die Verteilungen von SF6 und CO2 in der Troposphäre und Stratosphäre, unter den Zielsetzungen Evaluation des Modelltransports und Erweiterung des Datensatzes von SPURT auf globalen Maßstab, für den Zeitraum 1.1.2000 bis 31.12.2002 modelliert. Dabei konnte gezeigt werden, dass bei Modellstudien zur Evaluation des Transports mit Hilfe von Alterstracern nicht nur troposphärisch monoton steigende Tracer wie SF6 sondern auch saisonal variable Tracer wie CO2 verwendet werden müssen. Bei dem Vergleich der Modellergebnisse des TM5 mit ER2- und SPURTMessungen zeigt sich, dass das Modell zum jetzigen Zeitpunkt in der Lage ist, das mittlere Alter in der unteren Stratosphäre und die SF6- und CO2-Verteilungen in der LMS qualitativ richtig wiederzugeben. Das mittlere Alter in der unteren Stratosphäre wird um etwa 0.5 bis 1 Jahr in den Tropen über- und in den Extratropen unterschätzt. Die vertikalen Gradienten im Modell für SF6 und CO2 in der LMS sind, insbesondere im Winter und Frühjahr, zu gering. Die Amplitude des CO2-Jahresganges in der oberen Troposphäre und in der LMS wird durch das Modell unterschätzt, während der saisonale Verlauf des Jahresganges richtig wiedergegeben wird. Im Moment wird vermutet, dass eine zu starke isentrope Mischung zwischen Tropen und Extratropen und/oder ein zu geringer Aufwärtstransport in der extratropischen Troposphäre im Sommer und Herbst die Ursachen für die beobachteten Abweichungen zwischen Modell und Messung sind.
The thesis is devoted to the study of the Antarctic polar vortex, mainly by analyzing data collected during APE-GAIA (1999) and ASHOE (1994) campaigns and recorded by the ADEOS satellite (1996-1997), and to improvement of the chromato-graphic processing schemes. A general introduction and overview of the campaigns and instruments relevant to the present work are given in Chapters 1 and 2. A relatively large part of the thesis (Chapters 3-5) is on improvement of the analysis of raw chromatographic data recorded during in-flight measurements of the trace gases. A Gaussian non-straight-base-line method, i.e. the Gaussian processing scheme (Chapter 3), is developed for better evaluation of the chromatographic peak size. Furthermore, a statistical cross-correlation method (Chapter 5) based on statistical behaviour of the whole chromatogram series fNchrg recorded, e.g., during a research flight or laboratory calibration, is developed and applied to measure the low-concentration trace gases. As demonstrated for HAGAR's chromatograms (HAGAR - High Altitude Gas Analyzer), the combination of the Gaussian fitting scheme for individual chromatograms and the statistical cross-correlation method for a series of subsequent chromatograms considerably improves and stabilizes quantitative analysis of in-flight chromatographic data. In this case, the detection accuracy of weak and noisy chromatographic signals can be improved by up to 40 %. A particular attention is paid to the in-flight two-standard calibration method. For this method, a special procedure, that allows to evaluate and effectively remove a weak background chromatographic signal associated with residual molecules in the carrier gas N2, is proposed and coded (Chapter 4). The developed approaches and methods are completely automized and, therefore, can be used for processing of in-flight chromatograms of recent and future field campaigns. The main part of the thesis (Chapters 6-8) deals with a two-dimensional quasi-Lagrangian coordinate system ... , based on a long-lived stratospheric trace gas i, and its systematic use for i = N2O in order to describe the structure of a well-developed Antarctic polar vortex, linearization and compactization of the tracer-tracer correlations in the polar vortex core (i.e. the stratospheric dynamics in this area), and the differential ozone losses in the Antarctic polar vortex area. In the coordinate system ... (...-method, Chapter 6), which refers to a well-developed polar vortex, the mixing ratio Âi is the vertical coordinate and ... = .... i is the reference profile in the vortex core) is the meridional coordinate. The quasi-Lagrangian coordinates ... are much more long-lived comparing with the standard quasi-isentropic coordinates, potential temperature ... and equivalent latitude ..e, do not require explicit reference to geographic space, and therefore well-suited for studying the dynamics of the Antarctic polar vortex and the relevant ozone loss processes. By using the introduced coordinate system ... to analyze the well-developed Antarctic vortex investigated in the APE-GAIA campaign, it is shown, in concurrence with the conclusion of A. M. Lee et al. (2001), that the Antarctic vortex area can be described in terms of the well-mixed and well-isolated vortex core, relatively wide vortex boundary region and adjoining surf zone. In this case, the reference profile ... i , which is compact in a well-developed and isolated polar vortex core [J. B. Greenblatt et al. (2002)], can be found by combining airborne (and/or balloon) data with high-altitude satellite measurements. A criterion, which uses the local in-situ measurements of Âi = Âi(£) and attributes the inner vortex edge to a rapid change (±-step) in the meridional pro¯le of the mixing ratio..., is developed in Chapter 6 to determine the (Antarctic) inner vortex edge. In turn, the outer vortex edge of a well-developed Antarctic vortex is proposed to attribute to the position of a local maximum of ...H2O in the polar vortex area. For a well-developed Antarctic vortex, the ...-parametrization of tracer-tracer correlations allows to distinguish the tracer-tracer inter-relationships in the vortex core, vortex boundary region and surf zone (Chapter 7). This is clearly illustrated by analyzing the tracer-tracer relationships Âi ¡ ÂN2O obtained from the in-situ data of the APE-GAIA campaign for i = CFCl3 (CFC-11), CF2Cl2 (CFC-12), CBrClF2 (H-1211) and SF6. The solitary anomalous points in the ...CFC11 ¡ ÂN2O correlation, observed in the Antarctic vortex core during the APE-GAIA and ASHOE campaigns, are interpreted in terms of small-scale localized differential descent. As detailed in Chapter 8, the quasi-Lagrangian coordinate system fÂN2O; ¢ÂN2Og is an effective tool for evaluation of the differential ozone losses in the polar vortex area. With this purpose, a two-parametric reference function ...O3 = F(...), which characterizes the unperturbed O3 distribution in the early winter polar vortex area, is introduced to separate and quantify in terms of the meridional coordinate ...2O the differential ozone losses in the vortex core and vortex boundary region. The method is applied to analyze the ozone depletion in the Antarctic stratosphere during the austral spring 1999 (APE-GAIA campaign). In Chapter 9, the main results of the thesis are summarized.
Since the discovery of the ozone hole [Farman et al., 1985], the dynamics of the stratosphere and the transport of anthropogenic trace gases from the surface to the higher atmosphere has come into the focus of interest. In the tropics, air rises high into the stratosphere and is transported poleward. Trace gases like the CFCs1, photochemically stable in the troposphere, are thus transported into regions where they are photolyzed. The products of the photolysis reactions (eg. Cl, Br) interact in the catalytic ozone cycles and lead to enhanced ozone depletion. Regarding the transport of trace gases, the so-called lowermost stratosphere (LMS) is a very interesting region, where the troposphere and the stratosphere directly interact and air masses out of both regions are mixed. It is the lowest part of the stratosphere between the tropopause and the 380 K isentrope. Tropospheric air can enter this region directly via isentropic transport across the extra-tropical tropopause whereas stratospheric air descends across the 380 K isentrope via the mean meridional circulation. Stratosphere-troposphere exchange (STE) controls the chemical composition of the LMS as well as of the tropopause region and thus has an important effect on the radiative and chemical balance of these regions and the climate system. STE exhibits a strong seasonality [Holton et al., 1995]. While downwelling of stratospheric air across the 380 K isentrope is the dominant process in winter, troposphere-to-stratosphere transport (TST) gains importance in summer, when the downwelling from the stratosphere is only weak. Isentropic transport across the extra-tropical tropopause occurs in regions where the tropopause is strongly disturbed and is connected to tropopause folds, streamer events, frontal zones, polar and subtropical jets, warm conveyor belts and cut-off low systems. A short introduction into STE, the LMS region, and methods to study atmospheric transport is given in Chapter 1. One useful tool to analyse the motions of air and transport processes are longlived trace gases. Since the lifetimes of these tracers are longer than the time scale of the transport processes they are involved in, the distribution of tracers in the atmosphere is mostly determined by dynamics. In the context of this thesis, measurements of such long-lived tracers were performed and used to study transport into the LMS region in the northern hemisphere. During the Vintersol/EuPLEx and ENVISAT validation campaigns in winter 2003, long-lived tracers such as N2O, CH4, CFC-12, CFC-11, H-1211, H2, SF6 and CO2 were measured with the High Altitude Gas Analyser (HAGAR), a two channel in-situ gas chromatograph combined with a CO2 instrument, based on nondispersive infrared absorption. Combined with measurements taken during campaigns in Forli/Italy (ENVISAT validation) in July and October 2002, tracer data were gathered from the tropopause up to altitudes around 20 km during 25 flights on board the Russian high-altitude aircraft M55 Geophysica. Thus, a substantial set of high quality tracer data has been obtained covering the polar vortex region as well as the mid latitudes of the northern hemisphere. Chapter 2 gives an overview of the HAGAR instrument and necessary improvements of the instrumental set up (implementing a CH4 channel) that were performed in the context of this thesis, and review data processing, the measurement campaigns. In order to study transport into the LMS it is assumed that air basically enters the LMS via three different pathways: a) quasi-isentropic transport from the troposphere, b) downward advection from the middle stratosphere through the 380 K surface and c) in the polar vortex region subsidence of air from of the polar vortex. Fractions of air originating in each of these source regions are determined with a simple mass balance calculation by using observations of a subset of the above species with distinct lifetimes (N2O, CH4, CFC-11, H-1211, H2 and O3) yielding complementary constraints on transport from each region. Details of the mass balance calculation and the results are presented in Chapter 3. During the mid-latitude measurement campaigns in Forlí the passing of a cut-off low system associated with an elongated streamer over Europe was observed. The impacts of this event on the trace gas mixing ratios in the LMS are examined in Chapter 4. Finally, a summary is given in Chapter 5.
This work analyses several granitic bodies of the Variscan Orogen of Central and Western Europe in order to improve our knowledge about different aspects of their evolution, regarding their ascent and emplacement mechanisms, as well as their deformation history. In the Iberian Massif two granitoid bodies, namely the La Bazana pluton and the Nisa-Alburquerque batholith, were studied in order to decipher their ascent and emplacement history. The La Bazana pluton is a small, sub-circular body in map view that intruded into rocks of the Ossa-Morena Zone in the core of a late upright antiform. Its three-dimensional drop-pipe shape, its internal dome foliation pattern and the structure of the host rock suggest that the magma ascended and emplaced diapirically. The Nisa-Alburquerque batholith is a large body that intruded into rocks of the Central Iberian Zone, the Central Unit, and the Ossa-Morena Zone. Its cartographic shape is elongate and parallel to the NW—SE to WNW—ESE Variscan structures. In the light of the available structural data and the gravimetric models, the intrusion is viewed as a continuous lateral magma flow from the eastern root guided towards the west through the southern limb of a kilometre-scale antiform. As mass-transfer mechanisms, a combination of rigid translation of the country rocks, stoping, and possibly ballooning is proposed. In the Bohemian Massif several small granitoid bodies showing a strong solid-state deformation were studied in order to integrate their tectonometamorphic history in the geotectonic framework of the south-western Bohemian Massif, focusing principally on the deformation phase referred to as D3. Four ductile deformation phases are proposed for the study area. D1 produced high-temperature fabrics under upper amphibolite to granulite facies conditions. Its kinematics is unknown. D2 occurred under amphibolite to upper greenschist facies conditions under N—S to NNW—SSE compression. It is responsible for a subvertical NW—SE striking foliation in migmatites developed under dextral simple shear and for the deformation at the Bayerischer Pfahl shear-zone system at its earlier stages. Many granitoid dykes and stocks were found to be affected by sinistral shear along subvertical planes trending ENE to ESE. Since this deformation, which is called D3 in the present work, is not compatible with a N—S to NNW—SSE compression, it is proposed that these sinistral shear zones in granites do not belong to the Bayerischer Pfahl shear-zone system and constitute themselves a separated one, which is called “D3 shear-zone system”. D3 took place under upper greenschist to lower amphibolite facies conditions (~480-550°C). Both the intrusion and the deformation of the granites affected by D3 occurred at deep to intermediate levels of the crust, whereas the deformation took place under NE—SW compression. Datings on two of the deformed granites yielded 324.4 ± 0.8 Ma and 315.0 ± 1.0 Ma: Thus, the age of D3 is most probably ~315 Ma. The intrusion of most of the sheared granitoids was pre-kinematic with respect to D3. After D3 the N—S to NNW—SSE compression which governed D2 was restored, giving way to the next deformation phase D4, which was linked to further deformation at and next to the principal shears of the Bayerischer Pfahl shear-zone system under greenschist facies conditions. The causes for the change of the stress field leading to a NE—SW compression during D3 might be related to (1) global changes in the dynamics of the tectonic plates in late Variscan times, (2) orogenic collapse leading to the sinking of the Teplá-Barrandian and lateral extrusion of the surrounding Moldanubian rocks, (3) distortion of the regional stress field by local intrusion of large stocks, such as the Saldenburg granite of the Fürstenstein Massif, or (4) distortion of the regional stress field due to the existence of ephemeral releasing bends in the Bayerischer Pfahl shear zone during its early evolution.
Die Ergebnisse zur Sedimentologie, Taphonomie und Paläoökologie der Dinotheriensande des Urrheins in Rheinhessen geben weiteren Aufschluß über die tektonosedimentäre und paläoökologische Entwicklung des Urrheins. Die als Dinotheriensande bekannten Ablagerungen des Urrheins, deren Bildung nach biostratigraphischen Kleinsäugerfunden ins Obermiozän (Vallesium, MN 9, ca. 10,5 - 11 Ma.) gestellt werden, zeichnen sich durch fossile Wirbeltierfragmente teils großer Säugetiere sowie grober Gerölle überwiegend an der Basis, in einigen Bereichen auch aus Grobsand sowie größtenteils aus Fein- bis Mittelsand bestehenden fluviatilen Sedimenten aus. Der im heutigen Raum von Eppelsheim unter einer Ca. 3 m mächtigen Lössschicht liegende ehemalige Flusslauf des Urrheins floß von Worms und Westhofen aus dem Süden kommend entlang einer tektonisch bedingten Schwächezone in Eppelsheim nach Norden über Bermersheim Richtung Wißberg und Sprendlingen weiter nach Bingen. Dabei räumte die anfänglich sehr starke Strömung die durch tektonische Bewegung und eventuelle Verkarstung geschwächten Kalke der Inflata-Schichten (Aquitanium, Unter Miozän) und den Oberen Cerithienschichten (Chattium, oberstes Ober Oligozän bis Aquitanium, Unter Miozän) zu einem Flussbett aus. Die dabei durch die starke Strömung mitgeführten gut gerundeten, max. 170 mm großen Gerölle und Wirbeltierfragmente wurden an der Basis der Dinotheriensande über den abdichtenden Tonen der oligozänen Süßwasserschichten, in Verbindung mit glimmerfreien Grobsanden, abgelagert. Neben den Grobsanden (0,63 - 2 mm) an der Basis zwischen den großen Geröllen bestehen die Dinotheriensande überwiegend aus Feinsand (0,06 - 0,2 mm) und Mittelsand (0,2 - 0,63 mm), teils in gradierter Schichtung. In einigen Bereichen kommen immer wieder auch Grobsande und kleine bis mittelgroße Gerölle bis zum Top vor. Dabei erreichen die aus mehreren Schichtkörpern bestehenden Ablagerungen der Dinotheriensande bei Eppelsheim eine Gesamtmächtigkeit von 6,96 m. Die einzelnen Schichtkörper dieser Ablagerungen zeigen überwiegend Schrägschichtung, wobei die einzelnen Schichtungsblätter tangentiale Schrägschichtung erkennen lassen. Die Auswertung der Vorschüttungsrichtung aus Schrägschichtungsmessungen ergeben für die Hauptrichtung der Paläoströmung über der Basis eine Strömung aus SSE kommend, wobei die Strömung im weiteren Verlauf der Ablagerungen im Grabungsbereich von Eppelsheim von SE bis hin zum Top der Dinotheriensande von SSW kommend wechselt. Dabei lassen sich in den Ablagerungen der Dinotheriensande mit einer Gesamtmächtigkeit von 6,96 m schwerpunktmäßig von der Basis bis zum Top drei Fossilhorizonte erkennen. Hierbei variiert die Höhe des 2. Fossilhorizontes, von der Basis des 1. Fossilhorizontes in den Dinotherie~sandenü ber dem Ton der Süßwasserschichten gemessen, bei Ca. 140 - 150 Cm, sowie die Höhe des 3. Fossilhorizontes bei Ca. 400 - 410 cm. Neben der Anreicherung von fossilen Wirbeltierresten und den großen Geröllen an der Basis befinden sich in den Dinotheriensanden auch bis zu 50 mm große Gerölle, die überwiegend in dem 2. und 3. Fossilhorizont abgelagert wurden. Die Analyse von 10000 unterschiedlichen Geröllen ergab eine Zusammensetzung von gut gerundeten Quarzarten, Quarzite, Sandsteine, Kieselschiefer, Hornsteine, unterschiedliche Variationen von Chalzedon sowie Karneol, Rhyolith und Granit von der Basis bis zum Top der Dinotheriensande. Zwischen den Sanden eingeschaltete große Tonlinsen machen den Eindruck ehemaliger abgebrochener Uferbruchstücke, zumal sie teilweise mit großen Geröllen sedimentiert wurden. Die eigentlichen Sande bestehen aus überwiegend gut bis kantengerundetem Quarzsand, mit einem Glimmer-Anteil von Muskovit, etwas Biotit und im geringem Maße Phlogopit. Das Schwermineralspektrum setzt sich aus Granat, Apatit, Amphibol, Staurolith, Turmalin, Zirkon, Alterit, Hypersthen, Spinell, Siderit, Rutil, Topas, Gips und Augit sowie einem hohen Gehalt an opaken Mineralen zusammen. Die fossilen Wirbeltierfragmente, von Proboscidae, Rhinocerotidae, Equidae, Suidae, Cervidae, Bovidae, Tragulidae, Anthracotheriidae, Tapiroidae, Castoridae, unterschiedliche Arten von Carnivora sowie von Primaten und Insectivora stammend, bestehen zum größten Teil aus deren Zahnen und Zahnfragmenten. Weitere craniale und postcraniale Fragmente kommen gegenüber den Zähnen in geringerem Umfang vor. Fast alle Fragmente sind leicht bis stark abgerollt (Abrollungsgrad). Der größte Teil der Knochenfragmente zeigt ein einheitliches Bruchmuster, welches sich durch eine sägezahnförmige Fraktur mit scharfen Bruchkanten kennzeichnet. Einige Spuren in Form von Oberflächenmarken an den fossilen Knochen und Zähnen zeigen neben Bißspuren von Carnivora auch postmortale Spuren von Insekten und Nagern. Trockenrisse deuten auf eine mehr oder weniger längere Liegezeit der Kadaver bzw. der Skelette, Teilskelette oder vereinzelter Knochen an der Erdoberfläche vor der eigentlichen Sedimentation in den Dinotheriensanden hin. Auffallend finden sich die fossilen Wirbeltierreste in den Dinotheriensanden fast immer in unartikulierter und vereinzelter Fundlage, ausgenommen im Strömungsschatten größerer Objekte, wie zum Beispiel der große Kalkklotz im Grabungsbereich von Eppelsheim. Dabei handelt es sich um eine durchmischte Ansammlung von unartikulierten Wirbeltier-Fragmenten (Voorhies-Gruppen). Seit Beginn des 19. Jahrhunderts kamen die durch Zufall ausgegrabenen fossilen Wirbeltierreste aus den sogenannten Sandkauten Rheinhessens durch Ankauf ins Hessische Landesmuseum von Darmstadt (HLMD) und, neben anderen Instituten im In- und Ausland sowie einigen Privatsammlungen, ins Naturhistorische Museum von Mainz (NHMM). Die seit 1996 jährlich laufenden wissenschaftlichen Grabungen des Forschungsinstituts Senkenberg / Frankfurt a. Main (FIS) und im Anschluss des NHMM in Eppelsheim lieferten zu diesen historischen Sammlungen weitere Funde. Derzeit sind im HLMD 3217, im NHMM 5432 und im FIS 2278 fossile Funde aus den Dinotheriensanden von Rheinhessen inventarisiert (Stand: Frühjahr 2006). Die bei der Auswertung gewonnenen Daten der bestimmbaren, teilbestimmbaren und unbestimmbaren Funde aller drei Museen (HLMD, NHMM U. FIS) lieferten neben den schon erwahnten Daten über Abrollungsgrad, Bruchmuster, Oberflächenmarken und Voorhies- Gruppen, auch die über die orientierten Zähne ermittelbaren Werte der Mindestanzahl von Individuen aus den bekannten Fundorten in Rheinhessen. Über den Abkauungsgrad der Zähne, in Verbindung mit ihrer natürlichen Position, ließ sich das Altersspektrum dieser Individuen erstellen. Daneben wurde die Fossilienfarbe erfasst, mit deren Hilfe man die Funde in den historischen Sammlungen zur nachträglich Bestimmung des Fundhorizontes benutzen kann, da durch postsedimentäre Ausfällungen die Dinotheriensande, inklusive der darin befindlichen Fossilien, von der Basis bis zum Top unterschiedlich gefärbt sind. Schließlich wurde über die durchschnittlichen Gewichtsdaten der rezenten Vertreter der hier zu behandelten Tierarten eine Verteilungsübersicht in den drei bekannten Museen (HLMD, NHMM u. FIS) erstellt.
Physical soil properties feature high spatial variabilities which are known to affect geophysical measurements. However, these variations are not considered in most cases. The challenging task is to quantify the influence of soil heterogeneities on geophysical data. This question is analysed for DC resistivity and GPR measurements which are frequently used for near-surface explorations. To determine the pattern of electric soil properties in situ with the required high spatial resolution, geophysical measuring techniques are methodically enhanced. High-resolution dipole-dipole resistivity measurements are used to determine the electric conductivity distribution of the topsoil. Due to the small electrode separations, the actual electrode geometry has to be considered and an analytic expression for geometric factors is derived instead of assuming point electrodes. Two methods are used to determine soil permittivity with GPR:(i) the coefficient of reflection at the interface air-soil is measured with an air-launched horn antenna, (ii) the velocity of the groundwave is measured with a new setup using two receiver antennas enhancing the lateral resolution from in the best case 0.5 m for standard techniques to approximately 0.1 m with the new technique. With the optimised measuring techniques, the electric properties of sandy soils are determined in the field. Conductivity and permittivity show high spatial variability with correlation lengths of a few decimetres. Geostatistical simulation techniques are used to generate synthetic random media featuring the same statistical properties as in the field. FD calculations are carried out with this media to provide realistic synthetic data of resistivity and GPR measurements. Conductivity variations as determined in the field generate significant variations of simulated Schlumberger sounding curves resulting in uncertainties of the inverted models. Even in pedologically homogeneous sandy soil, moisture pattern and resulting permittivity variations cause strong GPR diffractions as demonstated by FD calculations. This influences the detectability of small objects such as e.g. landmines or of large reflectors as e.g. the groundwater table. Conductivity variations as typical for soils showed to have a minor effect on GPR measurements than variations of permittivity. In summary, geostatistical analysis and simulation provide a powerful tool to simulate geophysical measurements under field conditions including soil heterogeneity which can be used to quantify the uncertainty of field measurements by geologic noise.
The biomarker record in two different lakes in central Europe, Lake Albano and Lake Constance, is used to reflect environmental changes and lake system response during the Late Glacial and Holocene. Extractable organic compounds in lake sediments, which can be assigned to their biological source (biomarkers) function as fingerprints of past aquatic or land plant organisms. Using gas chromatography coupled with mass spectrometry, 21 different biomarkers (predominantly steroids and triterpenoids) as well as a variety of n-alkanes, nalkanols, and n-alkanoic acids could be identified in the sediment records of Lake Albano and Lake Constance. In the Holocene sediments of Lake Albano, the distribution of biomarkers such as dinosterol (dinoflagellates), isoarborinol, and diplopterol (aquatic organisms) indicate three biomarker zones: The period between 0-3,800 years BP (zone 3) is characterized by high concentrations of these biomarkers and others such as tetrahymanol and diploptene. Conversely, zone 2 (3,800-6,500 years BP) shows very low concentrations of all autochthonous biomarkers. In zone 1 (6,500–11,480 years BP), dinosterol, isoarborinol, and diplopterol range on a relatively high level, whereas diploptene and tetrahymanol display comparatively low concentrations. The results suggest at least two distinct changes in the predominance of primary producers during the Holocene, which are related to changes in the lake system such as lake mixing and water column stratification. This interpretation is consistent with previous investigations of Lake Albano sediments including pigment and hydrogen index data (Ariztegui et al., 1996b; Guilizzoni et al., 2002). Allochthonous biomarkers such as long-chain n-alkanes, amyrenones and friedelin indicate a development from forest to a more open landscape from 6,000 and 5.000 years BP, respectively. After a period of high concentrations during the first half of the Holocene, all biomarkers derived from deciduous trees exhibit relatively low values until around 1,000 years BP. Again, this is consistent with results from previous pollen investigations (Ariztegui et al., 2000). The sediment core from Upper Lake Constance comprises the Late Glacial and Holocene. It was analysed for biomarkers and inorganic tracers in order to compare the biomarker results with other proxy data from the same core. Magnetic susceptibility (MS) was measured to get a high-resolution stratigraphic framework of the core and to obtain further information about changes of the proportions of allochthonous and autochthonous input. Enhanced concentrations and accumulation rates of dinosterol (biomarker for dinoflagellates) and biogenic calcite give evidence of increasing lake productivity at the beginning of the Holocene followed by a decrease in bioproductivity after around 7,000 years BP. Younger Dryas sediments are characterized by low amounts of both dinosterol and biogenic calcite indicating a low productivity. The comparison of the concentrations and accumulation rates of b-sitosterol and stigmastanol with parameters reflecting lake productivity suggests that both steroids in Lake Constance sediments are mainly derived from terrigenous sources. Biomarkers as well as concentrations and accumulation rates of allochthonous inorganic compounds such as titanium, magnesium and strontium indicate a slightly enhanced allochthonous input after 8,500 years BP. Significant increase of erosive matter input from enhanced soil erosion is not observed before 4,000 years BP. This can be attributed to the combined effects of precipitation increase as a result of climatic deterioration and anthropogenic deforestation which is consistent with observations from other lakes in Central Europe. The MS record of Lake Constance confirms these results by tracing the climatically induced shifts of more intense bioproduction (low MS caused by increased calcite deposition) during the ‘climatic optimum’. This is followed by increasing input of terrigenous sediment compounds during colder and wetter periods which lead to higher MS values in the lake sediments. The occurrence of tetrahymanol in Lake Constance sediments questions the unambiguous use of tetrahymanol as an indicator for water column stratification. Anaerobic organic macroaggregates within the oxygenated, photic zone of the water column have to be considered as a possible living space for anaerobic microorganisms containing tetrahymanol. The direct comparison of two very different lakes Albano and Constance with respect to biomarkers indicating climate or environmental change provides a contribution to the recent biomarker research for a better understanding of biomarkers in lacustrine sediments.
Als Voraussetzung für die experimentellen Arbeiten wurde am Mineralogischen Institut in Frankfurt eine Hochdruckpresse mit einer Multi-Anvil-Apparatur vom Walker-Typ aufgebaut und kalibriert. Diese Arbeiten nahmen einen beträchtlichen Teil der Promotionszeit ein. In einer Reihe von Hochdruck-Experimenten wurde dann die maximale Löslichkeit von Aluminium und den Seltenerd-Elementen Lanthan, Gadolinium und Lutetium in den Phasen des CaSiO3-Systems im Druckbereich zwischen 2.0 und 13.0 GPa untersucht. Unsere Experimente ergaben eine Zunahme der maximalen Löslichkeit mit steigendem Druck, von Wollastonit über Ca-Walstromit, Larnit + Si-Titanit bis Ca-Perowskit. Ca-Perowskit zeigt extrem hohe SEE-Konzentrationen mit einem Maximum bei den mittleren SEE. In den anderen Phasen nimmt die Löslichkeit mit zunehmender Kompatibilität der SEE zu. Innerhalb der Stabilitätsfelder zeigte sich keine signifikante Druck- oder Temperatur-Abhängigkeit der maximalen Löslichkeit. Anhand der Mikrosonden-Analysen konnte gezeigt werden, dass der Einbau von Al und SEE in Ca-Walstromit nicht über eine gekoppelte Substitution erfolgt, sondern wahrscheinlich über eine Defektstruktur. Dies deckt sich mit unseren TEM-Untersuchungen an diesen synthetischen Produkten, die eine hohe Dichte an planaren Baufehlern mit leicht erhöhten SEE-Konzentrationen ergaben. In allen Ca-Silikat-Phasen lag die maximale Löslichkeit der Seltenen Erden höher als die Konzentration in natürlichen Proben. Damit steht fest, dass die in Einschlüssen gemessenen SEE-Gehalte „primär“ sind und sich nicht durch etwaige Entmischungen im Zuge einer Anpassung der Kristallstruktur an die veränderten P,T-Bedingungen verändert haben. Entmischungen in Form einer SEE-reichen Phase würden eine an LSEE extrem angereicherte Quelle voraussetzen. Ein Vergleich unserer Subsolidus-Experimente mit CaSiO3-Einschlüssen in Diamanten aus Guinea zeigt, dass einige mit bis zu 0.13 Gew.% Al2O3 an Aluminium gesättigt sind. Diese Tatsache ist besonders interessant bei der Interpretation Alhaltiger Einschlussphasen. Neben absoluten Spurenelement-Konzentrationen sind Verteilungskoeffizienten äußerst wertvolle Hilfsmittel bei der Bewertung natürlicher Proben. Die in der Literatur bestehenden Datensätze wurden mit unseren Kristall/Schmelz-Verteilungskoeffizienten bzw. Verteilungskoeffizienten zwischen Ca-Silikatphasen erweitert. Verteilungskoeffizienten der Seltenerd-Elemente zwischen Ca-Walstromit und Karbonat sind um eine Größenordnung höher als Ca-Walstromit/Schmelz-Verteilungskoeffizienten und zeigen eine größere Steigung zwischen den MSEE und den SSEE (Lu/Gd). Die Seltenen Erden verhalten sich sowohl in Larnit als auch in Si-Titanit inkompatibel, wobei DX/L La für Larnit etwa 0.1 und für CaSi2O5 etwa 0.002 ist, d.h. auch, dass die LSEE im Vergleich zu Si-Titanit bevorzugt in Larnit eingebaut werden. Al verhält sich in Si-Titanit Zusammenfassung 147 kompatibel (DX/LAl=4) und in Larnit leicht inkompatibel. Diese Ergebnisse decken sich mit Analysen an natürlichen Proben. Die SEE-Verteilungskoeffizienten zwischen Ca-Perowskit und Schmelze liegen mit Ausnahme von La über eins und zeigen in Übereinstimmung mit Literaturdaten ein Maximum bei Gd. Für Granat konnte gezeigt werden, dass der Einbau der SEE und Si in MgO-haltigen Kristallen in Abhängigkeit von Druck und Startzusammensetzung über eine Ca SEE2 Mg2 Si3O12- Komponente bzw. über eine Ca3 MgSi Si3O12-Komponente mit 6-fach koordiniertem Silizium erfolgt. In zahlreichen Experimenten kristallisierte eine neue Ca-SEE-Silikat-Phase mit Feldspat-Stöchiometrie. Dabei handelt es sich offenbar um ein Mischkristallsystem mit einem Endglied, in das vorwiegend die leichten SEE eingebaut werden und in einem zweiten mit vorwiegend schweren SEE. Ab einem Druck von etwa 10.0 GPa trennt ein Solvus die beiden Endglieder voneinander. In der Literatur ist bisher nur ein CaLa2Si2O8-Endglied beschrieben worden. In einigen Experimenten mit P und Li wurde zusätzlich untersucht, ob diese Elemente zur Rekonstruktion der Bildungsbedingungen von Diamanten verwendet werden können. Dabei zeigte sich, dass die max. Löslichkeit von Li in CaSiO3 näher an den natürlichen Probenzusammensetzungen liegt und damit möglicherweise Potential für die Rekonstruktion von Bildungsbedingungen hat. In einem weiteren Teil dieser Arbeit wurde die Kinetik retrograder Reaktionen im CaSiO3-System untersucht. Die für die In-Situ-Experimente mit Synchrotron-Strahlung notwendigen Versuchsaufbauten wurden von uns entwickelt und die entsprechenden Entwicklungsschritte und technischen Probleme ausführlich beschrieben. Anhand von Entlastungsexperimenten wurden die Disproportionierung von Ca-Perowskit zu Larnit + Si-Titanit und die Rekombination zu Ca-Walstromit bei unterschiedlichen Temperaturen und unter dem Einfluss von Wasser untersucht. Aufgrund der wenigen verwertbaren Daten, die uns vorliegen, konnten zwar keine Aktivierungsenergien berechnet werden, es sind aber aufgrund unser Beobachtungen folgende Feststellungen zu treffen: Die Reaktion von Ca-Perowskit zu Larnit + Si-Titanit erfolgt bei gleicher Temperatur offenbar um Größenordnungen schneller als die sich bei niedrigen Drucken anschließende Rekombination zu Ca-Walstromit. Dies deckt sich mit Beobachtungen an natürlichen Proben, bei denen Larnit und Si-Titanit teilweise unvollständig zu Ca-Walstromit reagierten. Dadurch erscheint es eher unwahrscheinlich, dass amorphes CaSiO3 in Diamanten ein direktes Umwandlungsprodukt von Ca-Perowskit ist. Aber auch für die in der Literatur beschriebene Amorphisierung von Ca-Walstromit-Einschlüssen (Stachel 2000) noch innerhalb des umgebenden Diamanten ließ sich durch unsere In-Situ-Entlastungsexperimente nicht stützen. Eine Amorphisierung von Ca-Walstromit beobachteten wir nur bei einer Untersuchung am TEM, wo die Phase sehr instabil war und selbst in einem Kryohalter rasch unter dem Einfluss der Elektronenstrahls amorphisierte. Die Beugungs-Spektren, die nach einer Druckentlastung im Ca-Walstromit-Stabilitätsfeld aufgenommen wurden, unterschieden sich trotz der CaSiO3-Chemie der neu gebildeten Phase deutlich von unseren Ca-Walstromit-Referenz-Spektren, so dass die Umwandlung möglicherweise über eine metastabile Zwischenstufe erfolgt. Vor dem Hintergrund von unterschiedlichen, in der Literatur beschriebenen Strukturtypen von Ca-Walstromit wäre eine systematische Untersuchung der Struktur innerhalb des gesamten Stabilitätsfeldes wichtig.
Die Montagne Noire am Südrand des französischen Zentralmassivs gehört in das Vorland der französischen Varisziden. Es handelt sich um einen metamorphen Kemkomplex mit einem Kern ("Axialzone") aus Graniten sowie teilweise migmatisierten Ortho- und Paragesteinen. Die Axialzone wird im Norden ("Nordflügel") und Süden ("Südflügel") von paläozoischen Sedimenten umrahmt. Der Nordflügel wird in die "westlichen Monts de Lacaune" (im Westen) und die "Nördliche Schuppenzone" (im Osten) unterteilt und besteht aus Gesteinen mit kambrischem bis silurischem Alter. Der Südflügel wird von einem Stapel aus mehreren Deckeneinheiten aufgebaut, deren stratigraphisches Alter vom Kambrium bis ins Karbon reicht. Die Deckeneinheiten heißen (von oben nach unten im Stapel): Pardailhan-Decke, Minervois-Decke, Mont Peyroux-Decke, Faugeres-Decke und Parautochthon. Die Montagne Noire repräsentiert den seltenen Fall eines "heißen" metamorphen Kernkomplexes, ist aber auch ein ideales Gebiet für vergleichende methodische Studien der sehr niedriggradigen Metamorphose: unterschiedliche Gesteinstypen (Sand- und Siltsteine, Tonschiefer, verschiedene Karbonate) lassen sich quer zur Metamorphosezonierung vom Bereich der Diagenese bis in die Grünschieferfazies verfolgen. In der vorliegenden Arbeit wurde die tektono-metamorphe Entwicklung der niedriggradigen paläozoischen Sedimente untersucht. Dazu wurde eine flächenhafte Studie der Schichtsilikatentwicklung in den Peliten durchgeführt. Es wurden folgende Methoden angewandt: Kubier Index ("Illitkristallinität"), Arkai-Index ("Chloritkristallinität"), "bo-Index" (zur Bestimmung des geothermischen Gradienten), Polytypie-Untersuchungen, sowie an ausgesuchten Proben Mikrosondenanalytik und Röntgenfluoreszenzanalyse. Femer wurden von K. Wemmer (Göttingen) an einigen Proben K-Ar-Datierungen der Feinfraktionen (<2 mikro m und <0,2 mikro m) durchgeführt, um die Entwicklung auch zeitlich zu erfassen. Die petrologischen und geochronologische Daten wurden zur Deformation in Bezug gesetzt. Dabei wurden sowohl Literaturdaten als auch eigene strukturgeologische Befunde verwendet. Es konnten drei tektono-metamorphe Hauptphasen nachgewiesen werden: Die erste Phase (D1 entspricht dem variszischen Deckenbau. Dabei wurde eine M1-Metamorphose angelegt, die durch den bo-Index als Mitteldruck-Metamorphose charakterisiert werden kann. Das Strukturinventar belegt einen etwa südgerichteten tektonischen Transport während D1. Diese Phase ist in der Nördlichen Schuppenzone sowie im W-Teil der Pardailhan-Decke erhalten. Das Alter dieser Phase konnte in kambro-ordovizischen Gesteinen mit der K-Ar-Methode auf 340 bis 330 Ma datiert werden. Diese Alter zeigen eine gute Übereinstimmung mit Ar/Ar-Datierungen aus den im N angrenzenden grünschieferfaziellen Decken des Albigeois. In den tieferen Decken des Südflügels, die ursprünglich weiter im Süden gelegen haben, kann die D1-Deformation erst nach Ende der Flyschsedimentation an der Grenze Vise/Namur (<320 Ma) stattgefunden haben. Die zweite Phase (D2) entspricht dem Aufstieg des metamorphen Kemkomplexes. Im Kontakt mit dem aufsteigenden, heißen Kern ist der größere Teil der paläozoischen Hüllschichten kinematisch und thermisch geprägt wurden. Dabei sind Strukturen und Mineralbestand von D1 und M1 ganz oder teilweise gelöscht worden. Die Extensions-bedingte penetrative S2-Schieferung ist im größten Teil des Südflügels das dominante Flächensystem: dies gilt für das Parautochthon, die gesamte Faugeres-Decke. den westlichen Teil der Mont Peyroux-Decke, den östlichen Teil der Pardailhan- Decke und wahrscheinlich auch die Minervois-Decke. Der Grad der Mz-Metamorphose, die auch in den westlichen Monts de Lacaune (Nordflügel) die prägende Metamorphose ist, nimmt generell mit zunehmender Entfernung von der Axialzone ab. Der bo-Index belegt Niederdruck-metamorphe Bedingungen. K-Ar-Datierungen aus verschiedenen Decken des Südflügels ergeben für D2/M2 Werte zwischen 310 und 300 Ma. Dieses Altersspektrum entspricht Ar/Ar-Datierungen (etwa 311 bis 303 Ma; synkinematischer Biotit und Muskovit; Maluski et al.1991) aus Scherzonen am S-Rand der Axialzone, die während der Exhumierung angelegt wurden. Die K-Ar-Alter der paläozoischen Decken passen auch sehr gut zu U/Pb-Altem aus Paragneisen (308 Ma, Monazit; Gebauer et al. 1988), Graniten (308 Ma, Monazit) und migmatischen Gneisen (313 Ma; beide Krause et al. 2004) der Axialzone, die eine starke thermische Aktivität zu dieser Zeit belegen. Das dritte metamorphe Ereignis (M3) ist unter Anderem im Stephanbecken von Graissessac, nachgewiesen, das im Zuge der Extensionstektonik (D2) am ENE-Ende der Axialzone entstanden ist. Nach dem bisherigen Kenntnisstand ist diese Metamorphose statisch. Der bo-Index belegt - wie auch bei M2 - eine LP-Metamorphose. Sie wurde vermutlich durch magmatische Instrusionen hervorgerufen. M3 muss jünger sein als das U-Pb-Alter eines Tuffes im tiefen Teil der Stefan-Abfolge (c. 295 Ma). Dazu passen Rb-Sr Mineralisochronen von 292 bis 277 Ma aus zwei benachbarten Granitplutonen. Ähnliche Alter treten auch in Pegmatiten der Axialzone auf. Nicht alle der untersuchten Bereiche können eindeutig einer der drei tektono-metamorphen Hauptphasen zugeordnet werden (St. Gervais-Einheit im NE der Axialzone, östlicher Teil der Mont Peyroux-Decke). Dies liegt vielfach an einer unzureichenden strukturgeologischen Datenlage. Teilweise haben aber auch Alterationsprozesse stattgefunden, welche die K-Ar-Alter verjüngt haben, oder der regionale Metamorphosegrad ist sehr niedrig. Schließlich ist in schwach anchimetamorphen oder nur diagenetisch beeinflussten Gesteinen die bo-Index-Methode nicht anwendbar. Insgesamt bestätigen die regionalen Untersuchungen das Bild eines heißen Gneiskerns, der während seines Extensions-bedingten Aufstieges seine Hüllschichten syntektonisch aufheizt. Zusätzlich zur geodynamischen Fragestellung wurden in dieser Arbeit auch methodische Aspekte verfolgt. Der Schwerpunkt lag hierbei auf der Untersuchung der K-Na-Verteilung in den Illiten bzw. Muskoviten. Es hat sich gezeigt, dass einige Proben Paragonit und/oder K/Na-Illit rührten. Diese Minerale stören die Bestimmung der Illitkristallinität im Röntgendiffraktogramm, da sich ihre Peaks mit denen des Illit überlagern. Es wurden daher verschiedene "Peak-Fittings" durchgeführt, bei denen sich zum einen zeigte, dass der 10 A-Peak besser für das Fitting von Illit und diskretem Paragonit geeignet ist als der 5 A-Peak. Es wurde zudem festgestellt, dass es nur schwer oder gar nicht möglich ist, Illit und eine K/Na-Phase mit einer zufriedenstellenden Qualität zu fitten. da die Peakmaxima zu nahe beieinander liegen. Eine Mikrosondenanalyse (teilweise auch Mikrosonden- Mapping) der betreffenden Proben zeigte, wie unterschiedlich die K-Na-Verteilung in den Illiten im anchimetamorphen Bereich sein kann. Es wurden diskrete Mineralphasen, eine domänenartige Verteilung und auch relativ homogene Mischkristalle beobachtet.
Die folgende Arbeit ist eine von drei Dissertationen des interdisziplinären Forschungsvorhabens „Landschaftsarchäologie im Hessischen Ried“, das im Rahmen des Frankfurter Graduiertenkollegs „Archäologische Analytik“ stattfand. Das Projekt bestand aus einer archäologisch-historischen (MAURER 2003), einer bodenkundlichen (KANNENGIEßER Diss. in Arbeit) sowie dieser palynologischen Dissertation. Gemeinsam beschäftigen sich diese Arbeiten mit der Landschaftsrekonstruktion des nördlichen Hessischen Rieds. Die palynologischen Untersuchungen hatten das Ziel, die bisher weitgehend unbekannte ‚jüngere’ Vegetationsgeschichte von der vorrömischen Eisenzeit bis etwa zum 5. Jh. n. Chr. zu rekonstruieren. Zwischen der Eisenzeit und dem Frühmittelalter gab es im Hessischen Ried mehrere kulturelle Umbrüche. In der Spätlatènezeit siedelte eine keltische Bevölkerungsgruppe im nördlichen Hessischen Ried. Deren Spur verliert sich aber im 1. Jh. v. Chr. Erst nach einer ‚Fundlücke’ von etwa 50 Jahren findet man schließlich Überreste eine elbgermanische Population (LENZ-BERNHARD & BERNHARD 1991). Über Lebensweise und Anzahl dieser germanischen Bevölkerung wissen wir fast nichts. Zumindest ein Teil von ihnen aber diente im römischen Heer. Etwa ab dem Jahr 13/12 v. Chr. in augusteischer Zeit stand das Ried unter dem Einfluss des seitdem am Rhein stationierten römischen Militärs (MAURER 2003). Im Zuge der Okkupation kamen römische Soldaten mitsamt ihrem Tross von Angehörigen und Marketendern an den Rhein. Da sehr wenig über die zuvor ansässige Bevölkerung bekannt ist, ist es unklar, wie sich die Bevölkerungsstärke und damit der Bedarf an landwirtschaftlicher Nutzfläche während dieser Zeit veränderte. In der mittleren Kaiserzeit (ca. 70–260 n. Chr.) bildete das Hessische Ried das südöstliche Vorfeld der Provinzhauptstadt Mogontiacum (Mainz) bzw. das Umland des Auxiliarkastells/Zivilvicus Groß-Gerau-„Auf Esch“. In die sog. „agri decumates“ rechts des Rheins (Tacitus, GERMANIA 29, 3) gesellten sich nach und nach noch gallische Siedler zur römischen Bevölkerung. Es ist zu erwarten, dass sich die kulturellen Umbrüche dieser Zeit auch im Landschaftsbild widerspiegelten. Beispielsweise werden vielerorts den Römern die ersten großflächigen Waldrodungen und Raubbau an der Landschaft zugeschrieben (BEHRE 1988, CÜPPERS 1990, DUMAYNE 1993). In den letzten Jahren mehren sich allerdings die Indizien dafür, dass zumindest in einigen Gebieten einschneidende Landschaftseingriffe bereits in der Eisenzeit stattgefunden haben und die Landschaft bei Ankunft der Römer schon weitgehend entwaldet und anthropogen geprägt war (BUNNIK et al. 1995, STOBBE 1996, 2000, STOBBE & KALIS 2001, 2002, DÖRFLER et al. 2000, KOOISTRA 1996, DUMAYNE 1993, DUMAYNE-PEATY 1998). Auch für das nördliche Hessische Ried bestätigt die vorliegende Arbeit dieses Bild. Schon in der Eisenzeit entstand im Hessischen Ried eine weitgehend geöffnete Landschaft mit Grünlandflächen und Äckern. Die Vegetationsveränderungen beim Übergang von der Bronzezeit zur Eisenzeit (um 800 BC) sind dabei weit deutlicher als beim Übergang von der Eisenzeit zur Römischen Kaiserzeit. In der Römerzeit wurde zwar der Ackerbau intensiviert und einige typische Kulturpflanzen wurden eingeführt, doch das restliche Pollenspektrum verändert sich kaum. Beim Rückzug der römischen Armee vom Odenwaldlimes kam es zu einer leichten Regeneration der Buche im Umland. Während der Völkerwanderungszeit sieht man in den Profilen keine deutliche Waldregeneration, sondern nur einen leichten Rückgang der Bewirtschaftung.
Drevermanns Name ist in der Geologie nicht mit bahnbrechenden Ideen und Theorien verknüpft. Er hat nicht seine gesamte Energie auf seine Forschungen gerichtet. Stattdessen seine - manchmal auch schwache - Kraft (vgl. 3.6.) auf die Lehre (bei der Senckenbergischen Naturforschenden Gesellschaft und Universität), die Aufklärung des Volkes (in Vorträgen und „Natur und Museum“) und vor allem auf sein Museumsengagement aufgeteilt. Schon in seinem zweiten Senckenberg-Jahr zeichnete sich das Engagement für die Museumskunde ab. Er arbeitete sicher in der ersten Zeit eher angeleitet, später freier planend und ergänzend für die Vollständigkeit der Sammlung. Und schon 1911 leidet Drevermann daran, daß er zu wenig Zeit für seine eigene Arbeit hat. Er bat am 10. Oktober 1911 den Anfang seiner „Dienststunden auf 9 statt um 8“ festzusetzen, also die „Anzahl reduzieren von 42 auf 36“ Stunden. Als Grund nannte er: „Während der Arbeitszeit im Museum ist es wegen der fortwährenden und vielseitigen Inanspruchnahme meiner Tätigkeit nicht möglich, zu eigener wissenschaftlichen Tätigkeit zu gelangen.“ Er schreibt weiter, daß er dadurch hofft, „länger am Abend arbeiten“ zu können. Schon damals zeigt sich sein offensichtlicher Zeitmangel für seine eigenen Forschungsarbeiten. Dies sollte ihn sein ganzes Leben begleiten. Als fast tragisch ist deswegen zu werten, daß er seine schon 1915 begonnene Arbeit über Placodus trotz großer Anstrengungen in 1930 und 1931 nicht mehr beenden kann. Als ausschlaggebend für den Wandel und für die Abkehr von der eigenen devonischen Forschung und den Beginn des enormen Museumsengagements darf die Schenkung des Diplodocus gewertet werden. Dieses Museumsexponat verlegte Drevermanns Forschungsschwerpunkt zu den fossilen Wirbeltieren, im speziellen den Dinosauriern und Artverwandten, und damit hin zu einem für Drevermann und damit für das Senckenberg-Museum noch heute erfolgreichen Museumsthema. Drevermann ging damit den Weg vom klassischen Devon-Paläontologen hin zum Museumswissenschaftler. In seinen Schaffensjahren zeigt sich sein Werdegang zum Agitator, er setzte die Akzente und arbeitete für seine Museumsvorstellungen. Dazu ein Zitat Drevermanns aus seiner frühen Veröffentlichung über die Meersaurier im Senckenberg-Museum (1914): „Das Streben unseres Museums nach einer möglichst vollständigen Vertretung aller wichtigen Typen des Tierlebens der Vorzeit ist am ersten bei den Meersauriern mit Erfolg gekrönt worden. Durch das wiederholte verständnisvolle Eingreifen mehrerer Gönner des Museums ist es gelungen, in einem Jahrzehnt eine Sammlung zu schaffen, auf die das Museum stolz sein kann.“ Drevermann deutet hier nur versteckt an, daß das angesprochene Jahrzehnt sein erstes im Senckenberg-Museum war. Mit Hilfe von Gönnern, deren Wohlwollen er in der Lage war sich zu verschaffen, gelang es ihm durch Täusche und Käufe diese Sammlung aufzubauen. Er wurde zur prägenden Persönlichkeit. Deswegen machte ihn die Senckenbergischen Naturforschende Gesellschaft zum ersten Geologieprofessor der jungen Frankfurter Universität. Ein Ergebnis seiner intensiven engagierten Arbeit: 1924 wird er zum geschäftsführenden Direktor des Senckenberg-Museums ernannt. Drevermann betrieb als Museumswissenschaftler eine populäre Wissenschaft. Die Beispiele dafür sind mannigfaltig: seine Texte in der Frankfurter Zeitung, das Entwickeln der Zeitschrift „Natur und Museum“ und seine Veröffentlichungen und Fragenbeantwortung hierin, seine vielen Reden, seine Radio-Aktivitäten. Das außerordentliche Engagement Drevermanns für „sein“ Museums-Periodikum zeigt dabei deutlich, wie er als Museumswissenschaftler agierte und nicht als forschender Naturwissenschaftler. Und er ist als Museumswissenschaftler erfolgreich, weil er besondere Qualitäten als Autor und Redner hat. Er beschreibt anschaulich - auch für den Laien - , aber wissenschaftlich genau. Beschäftigt hat sich Drevermann tatsächlich mit geologisch und paläontologischer Forschung nur sekundär. Er war nicht der Spezialist, sondern der Generalist - er verstand viele geologische und paläontologische Fragestellungen. Denn er war immer auf der Höhe des disziplinären Diskussionen – auch wenn er selbst nur einen geringen Beitrag an Lösungen dazu lieferte. Er selbst liest die Veröffentlichungen über die Forschungsarbeiten anderer, spricht in seinen Vorlesungen und Reden darüber, stellt Bücher vor, greift auch in die fachliche Diskussion ein mit Stellungnahmen und Essays, aber entfacht keine solche. Letzteres war nur einmal der Fall: bei seinen Vorstellungen über das Museum der Zukunft. Dieses Thema ist das eigentliche Vermächtnis Drevermanns.
Der Dritte Bericht des Zwischenstaatlichen Ausschusses für Klimawandel (IPCC, 2001a, b) bestätigt den Einfluss des Menschen auf das globale Klima und warnt vor einem Temperaturanstieg und vor Niederschlagsveränderungen in den nächsten 100 Jahren, die gesellschaftlichen Wohlstand und Umwelt nachhaltig beeinträchtigen können. Dabei werden weitreichende Folgen des Klimawandels angenommen, vom Anstieg des Meeresspiegels und einer möglichen Degradation von Landflächen bis hin zum Verlust von Tier- und Pflanzenarten, der Verknappung von Wasserressourcen, einer Zunahme von natürlichen Katastrophen wie Überschwemmungen und Dürren, der Ausbreitung von Krankheiten sowie negativer Auswirkungen auf die Nahrungsversorgung der Bevölkerung. Klimawandel ist dabei nur ein Aspekt des weiter gefassten ‘Globalen Wandels’, der eine Vielzahl von anthropogen verursachten Veränderungen der Umwelt einschließt. So wird zum Beispiel erwartet, dass auch demographische und sozioökonomische Entwicklungen sowie vom Menschen verursachte Landnutzungsänderungen eine erhebliche Auswirkung auf den zukünftigen Zustand der globalen Umwelt haben werden. Zu den gravierendsten Folgen des Globalen Wandels gehört die Veränderung der räumlichen und zeitlichen Verteilung der lokalen und regionalen Wasserressourcen. Es müssen daher Strategien entwickelt werden, um sowohl die Bevölkerung als auch die Umwelt vor den möglichen negativen Auswirkungen von erhöhten oder erniedrigten Pegelständen in Fließgewässern zu schützen, oder sie auf eine Veränderung der verfügbaren Wassermengen vorzubereiten. Zur Entwicklung dieser Strategien wiederum werden wissenschaftliche Szenarien und Modellberechnungen benötigt, mit deren Hilfe sich zukünftige hydrologische Verhältnisse abschätzen lassen. Zahlreiche derartige Szenarienanalysen wurden bereits durchgeführt, um den Einfluss des Klima- und Globalen Wandels auf das Wasserdargebot und auf das hydrologische Abflussregime zu untersuchen. Da Flusseinzugsgebiete eine natürliche und angemessene Betrachtungseinheit für dieses Problem darstellen, konzentrieren sich die meisten dieser Studien auf mittlere bis große Einzugsgebiete oder auf bestimmte Regionen zusammenhängender Flussgebiete. In Europa gibt es dazu Beispiele aus den frühen neunziger Jahren, als die Resultate der ersten Klimamodelle verfügbar wurden (z.B. Ott et al., 1991: für die Mosel; Kwadijk und van Deursen, 1993: Rhein; Vehviläinen und Huttunen, 1994: Vuoksi; Broadhurst und Naden, 1996: Severn; Bergström, 1996: Einzugsgebiet der Ostsee). Für diese Studien wurden hydrologische Modelle des jeweiligen Einzugsgebiets entwickelt und der Einfluss des Klimawandels auf den Abfluss bestimmt. Krahe und Grabs (1996) haben ein Wasserbilanzmodell mit einer Auflösung von 0.5° x 0.5° für den gesamten mitteleuropäischen Raum entwickelt und es anhandder Abflussdaten des Rheins, der Weser, der Ems, der Elbe und des deutschen Teils der Donau validiert. Arnell (1994, 1999), bzw. Arnell et al. (2000) untersuchten die Auswirkung des Klimawandels auf europäische Wasserressourcen ebenfalls mithilfe rasterbasierter Modellansätze. Schließlich zeigten Stanners und Bourdeau (1995), EEA (1999), Parry (2000), oder auf globaler Ebene WBGU (1999) und IPCC (1992, 2001a, b), in allgemeineren und politisch orientierten Untersuchungen den gegenwärtigen Zustand sowie mögliche zukünftige Entwicklungen der Umwelt in Europa und weltweit auf, einschließlich verschiedener Aspekte der kontinentalen Wasserressourcen und der Hydrologie. Im Vergleich zu den zahlreichen einzugsgebietsorientierten Analysen und ihrem stetig steigenden wissenschaftlichen Anspruch bis hin zu äußerst detaillierten Fragestellungen sind die regionalen oder globalen Ansätze jedoch eher selten und bleiben meist relativ unspezifisch in ihren Schlussfolgerungen. Darüber hinaus wird die Auswirkung der Wassernutzung, die erheblich zur Veränderung der zukünftigen Wasserressourcen und Abflussmengen beitragen kann, in den meisten Fällen aufgrund des Fehlens entsprechender Daten nicht berücksichtigt. In Anbetracht dieser Mängel wurde 1999 am Wissenschaftlichen Zentrum für Umweltsystemforschung an der Universität Kassel das EuroWasser-Projekt initiiert, auf dessen Durchführung die vorliegenden Dissertation beruht. In einem integrierten Modellansatz wurden in EuroWasser die Folgen von Klimawandel und sozioökonomischen Veränderungen auf die natürliche Wasserverfügbarkeit und die Wassernutzung auf gesamteuropäischer Ebene untersucht (siehe Abschlussbericht, Lehner et al., 2001). Das EuroWasser-Projekt versucht dabei drei aus Sicht von Gesellschaft, Ökonomie und Umwelt kritische Fragen zu beantworten: (1) Wie hoch ist der gegenwärtige Wasserstress in verschiedenen Regionen Europas, und welche zukünftigen Veränderungen sind zu erwarten? (2) Wie wird sich der Globale Wandel auf das europäische Wasserkraftpotenzial auswirken? Und (3) In welchen "kritischen Gebieten" Europas muss, basierend auf den Ergebnissen verschiedener Szenarien des Globalen Wandels, damit gerechnet werden, dass die Hochwasser- und Dürregefahr in Zukunft zunimmt, und von welcher Größenordnung sind diese Veränderungen? ...
Die drei Atolle Glovers Reef, Lighthouse Reef und Turneffe Islands vor der belizischen Küste im Karibischen Meer unterscheiden sich in Geomorphologie, Lagunentiefe, Sedimentbeschaffenheit, Mangroven- und Seegrasbewuchs, Wellen- und Strömungseinfluss sowie in ihren Sedimentationsraten und ihrem Entstehungsalter. Um herauszufinden, ob die Bivalven-Vergesellschaftungen verschiedener Lagunenzonen diese Unterschiede widerspiegeln, wurden 32 bis 44 rezente Sedimentproben auf jedem Atoll entnommen (Gesamtprobenzahl: 111). Deren Datensatz von insgesamt 32 122 Bivalvenschalen wurde anschließend Q-Mode-Cluster-Analysen unterzogen. Neben der Verteilung charakteristischer Arten wurde auch die Verteilung von Bivalven unterschiedlicher Lebens- und Ernährungsweise untersucht. Chione cancellata, ein flach grabender Suspensionsfresser, besiedelt bevorzugt (1) flache, wellen- und strömungsbeeinflusste Lagunenzonen. Die Sedimente (2) sehr hoch energetischer Flachwasserbereiche enthalten zudem hohe Anteile tiefer grabender Suspensionsfresser der Gattung Ervilia. Im (3) Rückriffbereich und am Atollrand sind tief grabende, Detritus fressende Telliniden häufig. Gouldia cerina, wie Chione ein flach grabender Suspensionsfresser, ist typisch für (4) geschlossene Flachwasserbereiche, während die Chemosymbionten-tragende, ebenfalls flach grabende Parvilucina sp. A. vorwiegend in (5) geschlossenen, tiefen Lagunenzonen vorkommt. Charakteristisch für (6) Mangrovengebiete ist Crassinella lunulata, ein sehr flach grabender Suspensionsfresser. Die Anteile taphonomischer Signaturen auf den Schalen, wie Bohrspuren, Inkrustationen, Fragmentierung und Abrasion sowie Diversität, Evenness und Richness sind auf Glovers Reef am höchsten und nehmen über Lighthouse Reef nach Turneffe Islands ab. Da in die gleiche Richtung zunehmende Sedimentationsraten auf den drei Atollen zu verzeichnen sind (GISCHLER 2003), ist vermutlich der abnehmende Effekt des Time-averaging für diesen Trend verantwortlich. Neben der rezenten Fauna wurden auch die Bivalven aus Vibrationsbohrkernen (ein Kern von jedem Atoll) untersucht. Die fossilen Bivalven-Vergesellschaftungen der inneren Lagunen von Glovers Reef, Lighthouse Reef und Turneffe Islands zeigen seit deren Entstehung eine für das jeweilige Atoll typische Fauna, die sich seit ~7000 YBP weiter entwickelte. Sie reflektieren damit die bereits im Anfangsstadium charakteristischen Unterschiede der drei Atolle.