Refine
Year of publication
- 2009 (111) (remove)
Document Type
- Article (78)
- Doctoral Thesis (33)
Language
- English (111) (remove)
Has Fulltext
- yes (111)
Is part of the Bibliography
- no (111)
Keywords
- Biochemie (2)
- Crystallography (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Virtual Screening (2)
- Wirkstoff-Rezeptor-Bindung (2)
- ADC (1)
- Adenin (1)
- Algebraisch Diagrammatische Konstrution (1)
Institute
- Biochemie und Chemie (111) (remove)
Molecules of the title compound, C40H42BrNO6, are located on a crystallographic twofold rotation axis. As a result, the nitro group and bromine residue are mutually disordered with equal occupancies. The propoxy-substituted aromatic rings are close to parallel to each other [dihedral angle = 21.24 (1)°], whereas the propenoxy-substituted rings enclose a dihedral angle of 70.44 (1)°. The dihedral angles between the methylene C atoms and the aromatic rings shows that the propenoxy substituted rings are bent away from the calixarene cavity [dihedral angle between the planes = 35.22 (8)°], whereas the propoxy-substituted rings are almost perpendicular [79.38 (10)°] to the plane of the methylene C atoms. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.006 A° ; disorder in main residue; R factor = 0.065; wR factor = 0.130; data-to-parameter ratio = 11.8.
The title compound, C14H9Cl3N2OS, has bond lengths and angles which are quite typical for thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C=S and C=O bond lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. Intermolecular N-H...S hydrogen bonds link the molecules to form centrosymmetric dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A° ; R factor = 0.029; wR factor = 0.078; data-to-parameter ratio = 17.2.
The title compound, C22H18N2O2, was derived from 1-(2-hydroxyphenyl)-3-(4-methoxyphenyl)propane-1,3-dione. The central pyrazole ring forms dihedral angles of 16.83 (5), 48.97 (4) and 51.68 (4)°, respectively, with the methoxyphenyl, phenyl and hydroxyphenyl rings. The crystal packing is stabilized by O-H...N hydrogen bonding. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.096; data-to-parameter ratio = 17.0.
The title molecule, C14H9ClN2OS, exists in the solid state in its amide form with a typical C=O bond length, as well as shortened C-N bonds. The plane containing the HNCO atoms subtends dihedral angles of 12.3 (4) and 8.1 (3)° with the planes of the phenyl ring and benzothiazole group, respectively, whereas the dihedral angle between the planes of the phenyl ring and the benzothiazole group is 5.96 (6)°. In the crystal, molecules form intermolecular N-H...N hydrogen bonds, generating independent scissor-like R22(8) dimers. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.028; wR factor = 0.079; data-to-parameter ratio = 13.3.
In the title compound, C15H17ClN2O4S, the atoms in the hydantoin ring are coplanar (r.m.s. deviation = 0.006 Å). The crystal structure is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-chlorophenyl group with the plane passing through the hydantoin unit is 82.98 (4)°. The cyclohexyl ring adopts an ideal chair conformation. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.081; data-to-parameter ratio = 15.0.
In the title Grignard reagent, [MgBr(C12H9)(C5H10O)2], the Mg centre adopts a distorted tetrahedral MgCO2Br arrangement. The dihedral angle between the two aromatic rings of the biphenyl residue is 44.00 (14)°. Each molecule incorporates one R- and one S-configured 2-methyltetrahydrofuran molecule. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.007 Å; R factor = 0.045; wR factor = 0.108; data-to-parameter ratio = 17.4.
The two aromatic rings in the title compound, C15H12Cl2N2O2S, enclose a dihedral angle of 37.49 (6)°. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation. In the crystal, molecules are connected by N-H...O and N-H...S hydrogen bonds, forming chains running along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ (C–C) = 0.002 Å; disorder in main residue; R factor = 0.035; wR factor = 0.087; data-to-parameter ratio = 18.9.
The asymmetric unit of the title compound, C14H8Cl4N2OS·0.5H2O, contains two independent molecules with different conformations with respect to the aromatic ring planes, and one water molecule. The bond lengths and angles are typical of thiourea compounds of this class. The molecule exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The dihedral angles between the two aromatic planes are 66.93 (8) and 60.44 (9)° in the two independent molecules. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the crystal packing is characterized by N-H...O, O-H...S and O-H...Cl hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.045; wR factor = 0.125; data-to-parameter ratio = 16.8.
The crystal structure of the title compound, C14H8Cl4N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the central SONNCC atom set subtends a dihedral angle of 31.47 (3)° with the benzene ring. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form centrosymmetric dimers via intermolecular N-H...S hydrogen bonds. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.087; data-to-parameter ratio = 17.9.
The title compound, C14H6Cl6N2OS·0.5CHCl3, crystallizes with four 1-(2,6-dichlorobenzoyl)-3- (2,3,5,6-tetrachlorophenyl)thiourea molecules and two trichloromethane molecules in the asymmetric unit. The thiourea molecules exist in the solid state in their thione forms with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. The -NH-C(=S)-NH-C(=O)- plane is almost perpendicular to the benzene ring in each thiourea molecule. Intramolecular N-H...O hydrogen bonds stabilize the molecular conformation and intermolecular N-H...S hydrogen bonds stabilize the packing arrangement. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.004 Å; R factor = 0.051; wR factor = 0.147; data-to-parameter ratio = 23.2.
The structure of the title compound, C14H9Cl3N2OS, is composed of discrete molecules with bond lengths and angles quite typical for thiourea compounds of this class. The plane containing the thiocarbonyl and carbonyl groups subtends dihedral angles of 48.19 (3) and 87.51 (3)° with the planes formed by the 3-chloro and 2,6-dichlorophenyl rings, respectively; the dihedral angle between the two benzene ring planes is 45.32 (3)°. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and the molecules form intermolecular N-H...S and N-H...O hydrogen bonds, generating a sheet along the alpha axis. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.094; data-to-parameter ratio = 25.5.
The title molecule, C16H15ClN2OS, exists in the solid state in its thione form with typical thiourea C-S and C-O bonds lengths, as well as shortened C-N bonds. An intramolecular N-H...O hydrogen bond stabilizes the molecular conformation and intermolecular N-H...S hydrogen bonds link the molecules into centrosymmetric dimers. The dihedral angle between the aromatic rings is 50.18 (5)°. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.032; wR factor = 0.085; data-to-parameter ratio = 15.3.
The crystal structure of the title compound, C15H17BrN2O4S, is stabilized by intermolecular N-H...O hydrogen bonds which link the molecules into centrosymmetric dimers. The dihedral angle subtended by the 4-bromophenyl group with the mean plane passing through the hydantoin unit is 83.29 (5)°. The cyclohexyl group adopts an ideal chair conformation with the methyl group in an equatorial position. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 Å; R factor = 0.030; wR factor = 0.070; data-to-parameter ratio = 16.8.
The title compound, Cs2Mg(H2P2O7)2·2H2O, is isostructural with the related known isoformular phosphates. The crystal framework consists of corner-sharing MgO6 and H2P2O7 polyhedra, leading to tunnels parallel to the b-axis direction in which Cs+ ions are located. The H2P2O7 unit shows a bent eclipsed conformation. The Mg2+ ion lies on an inversion center. The water molecules form hydrogen bonds to O atoms of two different dihydrogenphosphate ions, which are further hydrogen bonded to symmetry-equivalent dihydrogenphosphate ions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(P–O) = 0.006 Å; R factor = 0.048; wR factor = 0.125; data-to-parameter ratio = 12.3.
In the title molecule, C13H16ClNO, the mean plane of the atoms in the -CONH- group forms a dihedral angle of 42.0 (4)° with the benzene ring plane. In the crystal structure, molecules are linked by intermolecular N-H...O hydrogen bonds, generating C(4) chains along [100]. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.030; wR factor = 0.069; data-to-parameter ratio = 18.2.
Zusammenfassung Die Alzheimersche Krankheit (AD) ist mit 60% die am häufigsten auftretende Art der Demenz. Weltweit sind ca. 24 Mio. Menschen von der neurodegenerativen Krankheit betroffen, welche sich durch den Verlust der kognitiven Fähigkeiten auszeichnet. Es gibt zwei Ausprägungen der Demenz, zum einen die sporadische Verlaufsform, die bei Menschen in einem Alter ab 65 Jahren auftritt und zum anderen die familiäre Alzheimersche Krankheit (FAD), die schon weitaus jüngere Menschen betrifft und auf genetische Mutationen zurück zu führen ist. Beide Formen der Demenz zeigen den gleichen neuropathologische Phänotyp, der zur Ausbildung von extrazellulären Plaques und intrazellulären Neurofibrillen führt. Durch die Entstehung der Plaques und der Neurofibrillen werden die Verbindungen zwischen den einzelnen Neuronen verringert und die Neuronen sterben ab. Für das Auftreten der FAD sind Mutationen in den Genen des Amyloid Vorläufer Proteins (APP, Substrat) sowie der Aspartatprotease Einheit des γ-Sekretase Komplexes, Presenilin 1 (PS1) oder Presenilin 2 (PS2), verantwortlich. Die γ-Sekretase ist ein membranständiger Komplex bestehend aus den vier Untereinheiten PS1 oder PS2, Nicastrin (Nct), Aph-1 und Pen-2. Um ausreichende Informationen über den γ-Sekretase Komplex bezüglich seiner Interaktionsflächen, seines Katalysemechanismus und seiner Substraterkennung zu erhalten, wäre es hilfreich seine 3 Dimensionale Struktur aufzuklären, wozu große Mengen der sauberen und homogenen Proteine benötigt werden. Die Herstellung von ausreichenden Proteinmengen stellt derzeit aber einen Engpass für die strukturelle und funktionelle Charakterisierung des γ-Sekretase Komplexes in-vitro dar. Alzheimer’s disease (AD) is the most common cause of dementia, which affects 24 million people worldwide. It is a neurodegenerative disorder, which occurs either in its most common form in people over 65 years or in the rare early-onset familial AD (FAD). Responsible for the autosomal dominant FAD are mutations in the genes encoding for the β-amyloid precursor protein (APP) and the two homologues integral membrane proteins Presenilin 1 (PS1) and Presenilin 2 (PS2). The two PSs are major but alternative components of the intramembrane aspartyl protease γ-secretase. Further components are the membrane proteins Nicastrin (Nct), Aph-1 and Pen-2. Production of sufficient amounts of protein samples is still the major bottleneck for the detailed functional and structural in-vitro characterization of the γ-secretase complex. Due to toxicity, stability and targeting problems, the overproduction of MPs in conventional in-vivo systems often has only limited success. Therefore, efficient expression protocols using the cell-free (CF) system were established in this work. After optimization, I was able to produce up to milligram amounts of the single proteins PS1 and PS2, the cleavage products PS1-NTF and PS1-CTF, and Pen-2. The in-vitro produced γ-secretase subunits were further characterized, concerning their purity, secondary fold, thermal stability and homogeneity. Highest purities with over 90% after affinity chromatography could be achieved for PS1-CTF and Pen-2. Reconstitution of PS1, PS1-NTF, PS1-CTF and Pen-2 into E. coli liposomes results in a homogeneously distribution, which gives evidence for a structural folding. This was confirmed by CD spectroscopy of PS1-CTF and Pen-2. The thermal stability of Pen-2 shows a transition at 68°C, whereas PS1-CTF is stable up to 95°C. Both proteins show in addition homogeneous elution profiles investigated by analytical SEC and exhibit a monomeric (Pen-2) or dimeric (PS1-CTF) character analyzed by blue native PAGE. Different methods were performed to get evidence about the assembly of the complex, like pull-down experiments, immunoprecipitation, co-expression of radioactive labeled subunits and titration assays by liquid-state NMR. First hints for an interaction of the CF synthesized proteins could be observed by co-expression. Supplemental, Pen-2 and CTF could be purified in sufficient amounts and to apparent homogeneity that allow structural approaches by X-ray crystallography and liquid-state NMR spectroscopy. First conditions for protein crystals were achieved for Pen-2 and structural investigations of PS1-CTF by liquid-state NMR could be performed after optimization of the expression-, purification- and detergent conditions.
Despite the well-known importance of ribonucleic acids (RNA) in cell biology, it is astounding to realize the pace at which new fundamental functions of RNAs have been discovered. One of the fundamental reasons for the multitude of functions of RNA is the property of RNA to adopt different conformations or folds. The primary sequence of RNA, a linear polymer built from four different repetition units, can fold into alternate secondary structure motifs which in turn form alternate long-range interactions in complex tertiary structures. Ligands such as metal ions or small molecular weight metabolites and also proteins or peptides can bind to RNA and induce the changes in tertiary conformation. For example, in the cell, RNA participates in gene regulation in the form of riboswitches. Riboswitches are found in untranslated regions of messenger RNA (mRNA) and adopt alternate conformations depending on the presence or absence of specific metabolites. If a metabolite is present above a specific concentration, it induces a conformational change in the respective riboswitch by binding and thereby alters gene expression. Another example is the RNA thermometer which participates in the cell translational mechanism by a similar strategy. Translation initiation requires the binding of RNA thermometers to the ribosome. The ribosome binding region is located in the 5’ untranslated region of mRNA. At low temperatures this region is prevented from binding to the ribosome by forming basepairs. At higher temperatures, these basepairs dissociate allowing ribosome binding and subsequent translation. Therefore, the characterization and delineation of the kinetics and pathway of RNA folding is important to understand the function of RNA and is an important contribution to fundamentally understand RNA’s role in the cell. RNA conformational transitions occur over a wide range of timescales. Depending on the timescale, various biophysical techniques are used to study RNA conformational transitions. In these biophysical studies, achieving good structural and temporal resolution constitute frequently encountered challenges or limitations. For example, single molecule FRET spectroscopy provides high temporal resolution in the milliseconds at high sensitivity but lacks atomic resolution. Recent advances in the field of Nuclear Magnetic Resonance (NMR) spectroscopy have enabled the elucidation of tertiary folding events to be characterized with atomic resolution. This thesis involves the use of NMR spectroscopy to characterize the folding of RNA molecules. Kinetics experiments require rapid initiation of the kinetics followed by monitoring of the reaction. In this thesis, two different folding initiation techniques have been applied and coupled to the subsequent detection of RNA folding using NMR spectroscopy, namely, photocaging and rapid mixing. The method of photocaging is well established (Kuhn and Schwalbe, 2000) and builds on the following principle: A photolabile moiety is attached to a molecule that prevents a specific interaction. Upon irradiation of the molecule with the photolabile group using laser light at a specific wave length, at which the molecule of interest is not absorbing, the protecting group is released. In our group, together with the group of S. Pitsch, ETH Lausanne, we could "cage" RNA at its equilibrium state by a photolabile molecule (similar work has been carried out in the group of A. Heckel). Rapid and traceless release of the photolabile precursor compound by a laser pulse releases the RNA to fold into its native state; the build-up of the native state of the RNA is monitored by NMR signals that are uniquely characteristic for the native state of the RNA. By optically coupling a laser source to an NMR magnet, the above procedure can take place in situ and the kinetics recorded by NMR. Several different molecules can be caged: The photocage can be attached to RNA. Then, a modified photolabile nucleotide can be placed at strategic positions of a target RNA whose folding properties is to be studied. The photocage can also be attached to a ligand: if folding is dependent on ligand binding then the ligand can be modified to carry a photosensitive unit whose degradation allows binding to RNA. In this thesis, an alternative method for photocaging is introduced. Here, metal ions essential for folding of the RNA are photocaged using the photolabile chelating agent Dimethyl-nitrophen (DMN). Photolysis of DMNr releases the metal ion, thereby RNA folding is initiated. In the rapid-mixing technique, one of (several) components required for proper folding of the RNA is rapidly injected into an NMR sample in situ by the use of a pneumatic injection device. ...
Crystals of the title compound, C12H8N2·C7H8O2, were obtained during cocrystallization experiments of a compound with two hydrogen-bond donors (2-hydroxybenzyl alcohol) with another compound containing two hydrogen-bond acceptors (phenanthroline). Unexpectedly, the two molecules do not form dimers with two O—H ... N hydrogen bonds connecting the two molecules. However, one of the hydroxy groups forms a bifurcated hydrogen bond to both phenanthroline N atoms, whereas the other hydroxy group forms an O—H ... O hydrogen bond to a symmetry-equivalent 2-hydroxybenzyl alcohol molecule. In addition, the crystal packing is stabilized by Pi – Pi interactions between the two phenanthroline ring systems, with a centroid–centroid distance of 3.570 Å.
The title compound, C6H5NO2·C6H6O2, crystallizes with one pyridinium-2-carboxylate zwitterion and one molecule of benzene-1,2-diol in the asymmetric unit. The crystal structure is characterized by alternating molecules forming zigzag chains running along the a axis: the molecules are connected by O—H ... O and N—H ... (O,O) hydrogen bonds.
Epidermal growth factor (EGF) receptor belongs to the broad family of enzymatic receptors called receptor tyrosine kinases (RTKs). Generally, the binding of a ligand to these receptors leads to activation of their intracellular kinase activity that sets in motion a cascade of signaling events. In order to ensure appropriate responses to physiological stimuli, the cell is endowed with the ability to regulate signal transduction via numerous mechanisms such as dephosphorylation of the RTK and its substrates as well as downregulation of the RTK. Activation of EGFR is a potent mitogenic (proliferative) and motogenic (cell motility) signal that plays crucial roles during embryonic development and maintenance of adult tissue. EGFR signaling is primarily regulated by ligand-induced receptor internalization with subsequent degradation in lysosomes. While the complex of proteins that are recruited to EGFR after its activation is well understood, proteins that interact with the receptor in the absence of ligand binding are still not systematically studied. With the goal of identifying novel binding partners of non-activated EGFR, a membrane based yeast-two hybrid screen (MYTH) was conducted. MYTH is based on the principle of in vivo reconstitution of the N-terminus (Nub) and C-terminus (Cub) halves of ubiquitin once brought into close proximity. A chimeric protein consisting of EGFR fused to Cub and a transcription factor was used as a bait to screen Nub-tagged cDNA library. Analysis of resultant yeast transformants revealed a total of 87 proteins to interact with EGFR. Of these only 11 were previously shown to bind to EGFR. A majority of the other proteins were shown to interact with the receptor by yeast retransformation. Fifteen were confirmed to bind to EGFR by coimmunoprecipitation assays in mammalian cells. One of the novel EGFR interactors identified in the screen was histone deacetylase 6 (HDAC6). This deacetylase is localized in the cytoplasm and known to deacetylate alpha-tubulin, HSP90 and cortactin. The juxtamembrane region of EGFR binds to the Cterminus of HDAC6. Functionally, overexpression of wild type HDAC6 stabilized ligand-induced degradation of the receptor. On the other hand, deacetylase deficient or EGFR binding compromised mutants of HDAC6 were able to stabilize EGFR only partially. Downmodulation of HDAC6 expression by RNAi markedly accelerated degradation of the receptor. Taken together, HDAC6 is a negative regulator of EGFR downregulation that is dependent on its deacetylase activity and ability to bind to the receptor. Imaging studies revealed that HDAC6 does not affect internalization of EGFR from the plasma membrane but rather influences the post-endocytic trafficking of the receptor-ligand complex to lysosomes. Pulse-chase experiments using fluorophoretagged EGF showed that EGFR is transported faster towards the peri-nuclear region and delivered to late endosomes rapidly in HDAC6 depleted cells. HDAC6 is demonstrated to act, at least partly, by regulating the acetylation of alpha-tubulin. Upon EGFR activation, acetylation of alpha-tubulin on lysine 40 is progressively increased as shown by mass spectrometry and immunoblotting. Forced expression of a dominant negative mutant of alpha-tubulin, but not wild type alpha-tubulin, led to reduced speed and processive movement of early endosomes in GFP-Rab5 expressing cells. In a surprising twist, EGFR is able to phosphorylate HDAC6 on Tyr570. Phosphorylation of Tyr570 and Ser568 leads to inactivation of the deacetylase function of HDAC6 as shown by in vivo and in vitro assays. In summary, HDAC6 diminishes EGFR downregulation by slowing the transport of intracellular vesicles. The inhibitory effect is removed once HDAC6 is phosphorylated on key residues. In line with these findings, two recent reports have shown that hyper-acetylation of alpha-tubulin induced by inhibition of HDAC6 increases the transport of brain derived neurotrophic factor and JNK interacting protein-1 in different cell systems. Acetylated microtubules are more efficient in recruiting motor proteins like kinesin-1 and dynein. These findings indicate that HDAC6 plays an important regulatory role in intracellular trafficking pathways. However, several outstanding issues still remain unresolved. How does acetylation of microtubules influence vesicular trafficking? In this regard, the temporal and spatial dynamics of alpha-tubulin acetylation following EGFR activation should be studied. Furthermore, whether HDAC6 affects the trafficking of other endocytic cargos and additional organelles is an interesting question to address.
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
The title compound, C20H22O2, crystallizes with two independent molecules in the asymmetric unit. In each molecule, all the non-H atoms lie in a common plane (r.m.s. deviations of 0.098 and 0.079 Å). There is a [pi]-[pi] stacking interaction in the crystal structure. The central aromatic rings of the two molecules, which are stacked head-to-tail one above the other, are separated by centroid-to-centroid distances of 3.872 (13) and 3.999 (10) Å. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.003 A° ; R factor = 0.044; wR factor = 0.101; data-to-parameter ratio = 14.6.
The title compound, C14H20O3, is a synthetic analogue with a long aliphatic side chain of the important food additive and flavoring agent, vanillin. There are two independent molecules in the asymmetric unit, each having an essentially planar conformation (r.m.s. deviations of 0.023 and 0.051Å for all non-H atoms of the two molecules in the asymmetric unit). Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 A°; R factor = 0.049; wR factor = 0.144; data-to-parameter ratio = 15.9.
The title compound, C16H14N4, features an aromatic ring with two 2,2´-dicyanopropyl residues in positions 1 and 3, which are located above and below the ring plane. The two residues differ in their conformation with respect to the aromatic ring: whereas one of the Cmethyl-C-Cmethylene-Caromatic torsion angles is gauche [68.93 (12)°], the other one is fully staggered [177.63 (9)°]. The crystal structure is stabilized by C-H...N hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.002 Å; R factor = 0.037; wR factor = 0.101; data-to-parameter ratio = 15.0.
Adamantane-1-thioamide
(2009)
The title compound, C11H17NS, is an important intermediate for the synthesis of biologically active adamantlythiazolo-oxadiazoles. The adamantyl residue is disordered about a twofold rotation axis over two sites with site-occupation factors of 0.817 (3) and 0.183 (3). The crystal structure is stabilized by intermolecular N-H...S hydrogen-bonding interactions. Key indicators: single-crystal X-ray study; T = 173 K; mean &963;(C–C) = 0.002 Å; disorder in main residue; R factor = 0.038; wR factor = 0.103; data-to-parameter ratio = 12.3.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Introduction: Immune paralysis with massive T-cell apoptosis is a central pathogenic event during sepsis and correlates with septic patient mortality. Previous observations implied a crucial role of peroxisome proliferator-activated receptor gamma (PPARγ) during T-cell apoptosis.
Methods: To elucidate mechanisms of PPARγ-induced T-cell depletion, we used an endotoxin model as well as the caecal ligation and puncture sepsis model to imitate septic conditions in wild-type versus conditional PPARγ knockout (KO) mice.
Results: PPARγ KO mice showed a marked survival advantage compared with control mice. Their T cells were substantially protected against sepsis-induced death and showed a significantly higher expression of the pro-survival factor IL-2. Since PPARγ is described to repress nuclear factor of activated T cells (NFAT) transactivation and concomitant IL-2 expression, we propose inhibition of NFAT as the underlying mechanism allowing T-cell apoptosis. Corroborating our hypothesis, we observed up-regulation of the pro-apoptotic protein BIM and downregulation of the anti-apoptotic protein Bcl-2 in control mice, which are downstream effector proteins of IL-2 receptor signaling. Application of a neutralizing anti-IL-2 antibody reversed the pro-survival effect of PPARγ-deficient T cells and confirmed IL-2-dependent apoptosis during sepsis.
Conclusion: Apparently antagonizing PPARγ in T cells might improve their survival during sepsis, which concomitantly enhances defence mechanisms and possibly provokes an increased survival of septic patients.
Misregulated receptor tyrosine kinases (RTKs), i.e. the epidermal growth factor receptor EGFR or the insulin-like growth factor receptor 1 (IGF-1R), can be involved in the development of cancer. Monoclonal antibodies specifically inhibit the RTKs in cancer therapy. The scope of this thesis is to investigate the molecular basis of the inhibition through the therapeutic antibodies matuzumab (EMD72000) against EGFR and EMD1159476 against IGF-1R. The 3D crystal structure of matuzumab in complex with the EGFR domain III shows an eptiope connected with a novel inhibition mechanism: a non-competitive, sterical inhibition of receptor acitivation. The anti-IGF-1R targeted monoclonal antibody EMD1159476 shows a reduced binding capacity to the receptor in the presence of ligand indicating a competitive inhibition mechanism. The epitope of EMD1159476 is within domain II of the receptor. The results of these molecular interaction studies are important for the clinical therapies with these monoclonal antibodies. The matuzumab-EGFR complex crystal structure shows that a simultaneous binding of matuzumab and cetuximab (Erbitux) is possible. The latter antibody is already in clinical use. A combination of several therapeutic antibodies in cancer treatment might show synergistic effects and benefits for the patients.
5-lipoxygenase (5-LO) is the key enzyme in the formation of inflammatory leukotrienes, which are mediators of inflammation and allergy. The 5-LO catalyses the oxidation of arachidonic acid to 5-HPETE and subsequently to LTA4. The leukotrienes are involved in the development and maintenance of inflammatory diseases, like asthma and allergic rhinitis. Additionally, 5-LO is overexpressed in some cancer types, although its relevance is still not fully understood. 5-LO expressing cells are B- lymphocytes and cells of myeloid origin like monocytes, macrophages and granulocytes. The 5-LO promoter lacks a TATA or CCAT box and covers two CpG islands. These are characteristics of a housekeeping gene, but as the 5-LO is not expressed ubiquitiously, the expression of the 5-LO is tightly regulated. Epigenetic mechanisms were known to be involved in the control of the 5-LO expression. The HDAC inhibitor TsA significantly induced the transcriptional activity of the 5-LO promoter in reporter gene assays as well as on 5-LO mRNA transcript level in MM6 cells. The GC-boxes GC4 and GC5 in the proximal 5-LO promoter were identified to be essential for the TsA effect, as deletion of these element led to an attenuated TsA effect in reporter gene assay. Recruitment of the transcription factors Sp1 and Sp3 and the RNA polymerase II to the 5-LO promoter was detectable after TsA treatment in MM6 cells by chromatin immunoprecipitation assays (ChIP), while the acetylation status of histone H4 remained unchanged. Likewise it is known that DNA methylation leads to silencing of 5-LO expression in-vitro and in-vivo. The 5-LO promoter is densely methylated in the cell line U937, but unmethylated in HL-60 cells and - elucidated in this study - also in MM6 cells. Reporter gene assays with in-vitro methylated 5-LO promoter containing plasmids revealed that the frequency of methylated CpGs is directly proportional to reduction of 5-LO promoter activity. Incubation of U937 cells with 5-AdC, an inhibitor of DNA methyltransferases, was able to reactivate 5-LO transcription and to demethylate CpG dinucleotides. In the first part of this study the mechanism of TsA induced promoter activation was further investigated. I elucidated the mechanism of Sp1 and Sp3 recruitment to the 5-LO promoter after TsA treatment. Immnoprecipitation assay was used to detect a transcription factor complex containing Sp1 or Sp3 interacting with HDAC proteins, which might change its composition after TsA treatment. Besides the posttranslational modifications of the transcription factors Sp1 and Sp3 after TsA treatment were investigated, potentially causing an increased interaction of the proteins with the 5-LO promoter. Both aspects and their response in HDAC inhibition have been described. TsA did not affect the composition of the Sp1/HDAC1/HDAC2 complex. Sp3 was not located in a complex with the HDAC enzymes. Acetylation of Sp1 and Sp3 was detectable, but no change occurred after TsA treatment. Since neither release of the transcription factors off a complex, nor alterations in posttranslational modifications of Sp1 and Sp3 are the reason for the increased Sp1 and Sp3 binding to the 5-LO promoter, I elucidated alterations in the chromatin structure. The acetylation status of the histone proteins H3 and H4, as well as the chromatin marks H3K4me3, representing active chromatin, and H3K9me, representative for repressive state, were investigated. Additionally, the time course of the TsA effect was determined on 5-LO mRNA level using real-time PCR. The acetylation status of the histone proteins on the 5-LO core promoter correlated with the basal 5-LO mRNA transcript expression in MM6, HL-60 and U937 cells. The highest 5-LO mRNA level was detectable in MM6 cells, followed by HL-60 cells. The lowest 5-LO mRNA level was detected in 5-LO promoter methylated U937 cells. The order of the basal 5-LO mRNA expression of the three cell lines correlates with the basal acetylation status of histone proteins H3 and H4. In MM6 cells the highest basal levels in acH3 and acH4 were detected, followed by HL-60 and U937 cells. Moreover, the data obtained in U937 cells revealed that the correlation between DNA methylation and histone hypoacetylation is alike on the 5-LO promoter. TsA treatment induced the 5-LO mRNA level in the three cell lines with different intensity: 5-LO mRNA level in MM6 cells was induced 11-fold, in HL-60 cells 6- fold and in U937 cells 4- fold. The histone acetylation and methylation levels on the 5-LO promoter after TsA incubation were investigated. No increase in acH3 and acH4, but in H3K4me3 was detectable in MM6 cells by ChIP assay. HL-60 cells showed an increase in acH3 and acH4 as well as in H3K4me3. H3K9me was only detectable in untreated U937 cells, but disappeared after TsA treatment, while acH3, acH4 and H3K4me3 increased constantly after TsA treatme nt. A strong correlation between the histone modifications and the time course of the mRNA expression was detectable in all three cell lines. The combination of the posttranslational modifications acH3, acH4 and H3K4me3 led to a fast effect in transcriptional activation and the maxima of acH3 and acH4 were usually associated with the maximum in 5-LO mRNA transcript level. An increase in H3K4me3 alone, as detected in MM6 cells, led to continuous increase in the 5-LO mRNA expression with a late maximum. Additionally, we detected a slight overall decrease in 5-LO promoter methylation in U937 cells after TsA treatment. This fact taken together with the observed histone modifications could explain the 4- fold response in 5-LO mRNA level to TsA treatment of the methylated cell line U937. Another aim of the present study was to identify the specific HDAC enzymes involved in the 5-LO promoter regulation. Reporter gene assays and real-time PCR with selective HDAC inhibitors revealed that HDACs of class I are involved in 5-LO promoter regulation, namely HDAC 1, 2 and 3. The influence of each of the enzymes seemed to depend on the cell type, as inhibition of HDACs 2, 3 strongly induced 5-LO promoter activity in reporter gene assay in HeLa cells, whereas in MM6 cells HDACs 1 and 2, 3 seemed to be responsible for the 5-LO promoter regulation, measured as 5-LO mRNA level. The HDACs of class IIa and class III are not involved in the regulation of 5-LO mRNA expression. The second part of this study investigated the influence of MBD proteins on the methylated 5-LO promoter and the 5-LO mRNA expression. ChIP assays revealed MBD1, 2 and MeCP2 protein binding to the proximal 5-LO promoter in U937 cells. MBD1 was detectable on the 5-LO promoter in unmethylated HL-60 cells, while no MBD protein was located on the 5-LO promoter in MM6 cells. To elucidate the functional role of the MBD proteins, stable knocked down of MBD proteins was established in U937 cells. 5-LO mRNA transcript level was determined in the knock down clones by real-time PCR. The 5-LO transcript level was increased in all knock down samples. MBD2 knock down clones showed the highest effect in activating 5-LO with a 3- and 4.4-fold increase in the 5-LO mRNA level, followed by MBD1 (3.5- fold) and MeCP2 (2.5-fold) knock down clones. A combined participation of these three enzymes in the corepression of the methylated 5-LO promoter is indicated. Taken together, the data reveal that epigenetic mechanisms are strongly involved in the regulation of 5-LO transcription and might function as a crucial control mechanism of 5-LO expression.
Acute myeloid leukemia (AML) is a hematopoietic cell disorder characterized by a block in differentiation and increased proliferation and survival of malignant blasts. Expansion of the malignant cell clone effects the normal production of blood cells and – if left untreated – leads to death. Receptor tyrosine kinases (RTKs) play an important role in the pathogenesis of AML, as they are either often mutated or overexpressed. In normal hematopoiesis, RTK signal termination is tightly controlled, and involves ubiquitination, internalization, endocytosis and degradation. Cbl proteins are E3 ligases and have been shown to ubiquitinate several activated RTKs, including Flt3 and Kit, targeting them for degradation. Recently, several Cbl mutations have been identified: Cbl-R420Q was identified in an AML patient and Cbl-70Z was identified in a mouse lymphoma model. In this thesis work, the role of these Cbl mutants in Kit signaling and in a mouse transplantation model was studied. Cbl mutants (Cbl-R420Q, Cbl-70Z) have the ability to transform the myeloid 32D cell line in cooperation with Kit WT. Cbl mutants along with Kit promoted interleukin-3 (IL3)-independent proliferation and enhanced the cell survival of 32D cells. In contrast, expression of the Cbl mutants alone did not confer IL3-independent growth. Stem cell factor (SCF, the Kit ligand) dependent growth was enhanced in the presence of Cbl mutants and Cbl mutants promoted colonogenic growth in the presence of Kit. Furthermore, Cbl mutants inhibited the ubiquitination of the activated Kit receptor. In addition, Cbl mutants inhibited the endocytosis of the activated Kit receptor. Retroviral expression of Cbl mutants in transplanted bone marrow induced a generalized mastocytosis, a myeloproliferative disease and, in rare care cases, myeloid leukemia. Splenomegaly was observed in the presence of Cbl mutants. Furthermore, mast cells with variable range of infiltration were noticed in all the vital organs (spleen, liver, bone marrow, lung, kidney, heart) of Cbl (mutant) transplanted mice. Almost all recipients of bone marrow cells transduced with Cbl mutants developed a lethal hematologic disorder with a mean latency of 341 days in the Cbl-R420Q group and 395 days in the Cbl-70Z group. This is the first published report on a hematological disease with Cbl mutants in a mouse model. Co-immunoprecipitation studies indicated that Cbl-70Z binds to Kit, even in the absence of Kit ligand. Cbl-R420Q also bound to Kit in the absence of SCF, albeit to a lesser extent. Association of Cbl mutants to Kit was enhanced in the presence of SCF. Signaling studies demonstrated the constitutive activation of Akt and Erk in the presence of Cbl mutants and Kit. In addition, Cbl mutants enhanced the SCF-dependent Kit, Akt and Erk activation. Cbl-70Z, in association with kinase-dead Kit (Kit-KD) or kinase-dead Flt3 (Flt3-KD), conferred IL3-independent growth and survival to the myeloid 32D cell line. Cbl-R420Q provided only a slight growth advantage in the presence of Kit-KD. As demonstrated by pharmacological inhibition studies, Akt activation was necessary for the transformation mediated by Cbl-70Z and Kit-KD / Flt3-KD. Cbl mutants enhanced the Src family kinases (SFKs) activity. The pharmacological inhibition of SFK activity inhibited the proliferation and colonogenic growth. Interaction was found between Cbl-70Z, SFKs and Kit-KD. The SFK member Fyn was identified to bind to Cbl. In addition, kinase activity of SFKs was necessary for binding to Cbl, since SFKs inhibition by PP-2 abolished the binding between the complex-binding partners. Dasatinib and PP-2, both SFK inhibitors, inhibited the Cbl and Akt phosphorylation indicating that Fyn acts upstream of Akt. Inhibition of Kit with imatinib reduced the proliferation of cells overexpressing Kit WT and Cbl-70Z much stronger compared with cells expressing Kit-KD and Cbl-70Z, but much less than the dual KIT/SFK inhibitor dasatinib. This indicated that Kit kinase activity was required but not essential. The data presented in this thesis work implies that both RTK and SFK inhibition may have to be targeted, in order to effectively prevent transformation. In summary, the present thesis work indicates an important role of Cbl, Kit and SFKs in myeloid transformation and deregulated signal transduction.
There are two independent molecules in the asymmetric unit of the title compound, C19H24S2. In both molecules, the aliphatic segment of the ligand is in an all-trans conformation: the –S–(CH2)5–S–bridging chain is almost planar (r.m.s. deviation for all non-H atoms = 0.0393 and 0.0796 Å in the two molecules) and maximally extended. Their mean planes form dihedral angles of 4.08 (6)/20.47 (6) and 2.22 (6)/58.19 (6)° with the aromatic rings in the two molecules. The crystal packing is purely governed by weak intermolecular forces.
The various OPE mixtures were also tested on sSOI material which consists of a thin strained silicon layer on top of an insulator like silicon dioxide. The OPE A, B and F are able to reveal threading dislocations (TD) in the strained silicon film (chapter 5.11). The TD densities determined for the OPE A correspond very well with those obtained with the Secco diluted reference. The tested OPE mixtures are not able to delineate other crystal defects like stacking faults, pile ups or twins, which also appear in the strained silicon. Some Organic Peracid Etches were also tested on wafers with an epitaxial silicon layer and on silicon substrates. Epitaxially produced silicon layers are nearly defect-free. Etching times were chosen such that only a part of the epitaxial layer was removed. Nevertheless, after very long etching times (> 16 h) isolated pits were found, with defect densities ranging from 104/cm3 to 106/cm3 depending on the etching solution used. No etch pits were found in the remaining epitaxial layer when OPE F was used. Longer etching times appear to favour the formation of artefects. These artefacts could be caused by the formation of gas bubbles, particles or micro scratches at the crystal surface. The OPE C and D are able to reveal vacancy agglomerates (D-defects) in silicon substrates (see under 5.5, 5.6 and 5.11in chapter 5). Due to their low removal rates and the long etching times which favour the formation of artifacts, these solutions are less suited to the delineation of defects in silicon substrates. In the second part of this study the different etch formulations have been compared with each other in respect of their physical properties like removal rates, activation energies, standard potentials and selectivities (chapter 6). The selectivity was determined at etch pits caused by dislocations. The depth of the etch pits, determined by atomic force microscopy (AFM), should be dependent on the selectivity of the corresponding etching solution used. The higher the selectivity of the solution the deeper the etch pit should be. It was assumed that a low removal rate and a high activation energy for the etching process should correspond to a high selectivity. However, the experimental results have shown that it is not possible to predict the selectivity of an etching solution from experimental parameters like removal rate or activation energy. One must bear in mind that selectivity was only determined on one particular type of crystal defect, namely on dislocations. Values for selectivity in the etching solutions can differ for other defect types. Besides the etching solutions used in this study differ considerably from each other in respect of their chemical and physical roperties. They can be divided into three completely different etching systems. The original Secco solution and the diluted variations thereof are hydrofluoric acid-dichromate mixtures with the Cr6+ species as the oxidizing agent. The Jeita and MEMC solutions contain nitric acid, hydrofluoric acid and, as diluents, acetic acid and water. Here the oxidizing agents are various N(III) species which are formed autocatalytically during the etching process. The concentration of acetic acid also plays an important role as it lowers the degree of dissociation of HF and of HNO3. This has an influence on the pH and the standard potential of the etching solution. The Organic Peracid Etches are mixtures of hydrogen peroxide and a short-chain alkanoic acid like acetic acid. Such systems are strictly speaking not aqueous solutions, the reactive species is the peracid formed.Within each system, however, a certain relationship is perceived between the selectivity of the etching solution on the one hand, and the and the activation energy or the removal rate on the other. The decreased activation energy for the etching process of silicon at a dislocation can be calculated from experimental data by using the Arrhenius equation (chapter 6.3). It was found that the strain inside the crystal lattice caused by a dislocation loop leads to an increase of the potential energy of ~ 5 % and, hence, a decrease of the activation energy of ~ 5 % and an increase in the removal rate of ~ 100 %.
The title compound, C20H22O4S2, was synthesized by the reaction of 1,4-dibromobutene with methyl thiosalicylate. The aliphatic segment of this ligand is in an all-trans conformation. The bridging chain, –S-(CH2)4-S–, is almost planar (r.m.s. deviation for all non-H atoms: 0.056 Å) and its mean plane forms dihedral angles of 16.60 (7) and 5.80 (2)° with the aromatic rings. In the crystal, the molecules are linked by weak C—H ... O interactions into chains with graph-set notation C(14) along [0 0 1]. The crystal studied was a racemic twin, the ratio of the twin components being 0.27 (9):0.73 (9).
Ataxia represents a pathological coordination failure that often involves functional disturbances in cerebellar circuits. Purkinje cells (PCs) characterize the only output neurons of the cerebellar cortex and critically participate in regulating motor coordination. Although different genetic mutations are known that cause ataxia, little is known about the underlying cellular mechanisms. Here we show that a mutated axJ gene locus, encoding the ubiquitin-specific protease 14 (Usp14), negatively influences synaptic receptor turnover. AxJ mouse mutants, characterized by cerebellar ataxia, display both increased GABAA receptor (GABAAR) levels at PC surface membranes accompanied by enlarged IPSCs. Accordingly, we identify physical interaction of Usp14 and the GABAAR alpha 1 subunit. Although other currently unknown changes might be involved, our data show that ubiquitin-dependent GABAAR turnover at cerebellar synapses contributes to axJ-mediated behavioural impairment.
Enantioselective carbon-carbon bond-forming reactions, particularly, using organocatalysts represent one of the most important areas in modern synthetic chemistry. New concepts and methods in organocatalysis are emerging continuously, allowing more selective, economically more appealing and environmentally friendlier transformations. Chiral Brønsted-acid catalysts have recently emerged as a new class of organocatalysts for a number of enantioselective carbon-carbon bond-forming reactions. The first part of this thesis focused on the new development of new Brønsted acid-catalyzed enantioselective Nazarov cyclizations. The Nazarov reaction belongs to the group of electrocyclic reactions and is one of the most versatile methods for the synthesis of five-membered rings, which are the key structural elements of numerous natural products. In general, the Nazarov cyclization can be catalyzed by Brønsted or Lewis acids. However, only a few asymmetric variations have been described, of which most require the use of large amounts of chiral metal complexes. The reactivities of Nazarov cyclizations are also depending on the substituents of the divinyl ketone substrates as described in the first chapter. The substrates to study Brønsted acid-catalyzed enantioselective Nazarov cyclization were prepared following the known procedures. The dihydropyran was treated with tBuLi in THF at –78 oC and then the α,β-unsaturated aldehydes 1 were added to the reaction mixture to afford the corresponding alcohols 2 in moderate to good yields. The alcohols 2 were oxidized to divinyl ketones 3 employing Dess-Martin periodinane/pyridine (DMP/py) in CH2Cl2 at room temperature to obtain the divinyl ketones 3 in moderate to good yields (Scheme 1). Scheme 1. Preparation of substrates in order to study Brønsted acid-catalyzed enantioselective Nazarov cyclization and subsequent transformations. At the starting point, an evaluation of suitable Brønsted acid catalysts for the enantioselective Nazarov cyclization of divinyl ketone 3a was performed. The initial reactions conducted with various BINOL-phosphoric acids 4a-4e in toluene at 60 oC provided the mixture of cis and trans cyclopentenones 5a with enantioselectivities of up to 82% ee (Table 1, entries 1-5). Eventually, improved reactivity could be achieved by using the corresponding N-triflylphosphoramides 4f and 4g, which even at 0 oC gave complete conversion after ten minutes. Additionally, it was shown that the use of these catalysts significantly enhanced both the diastereoselectivity (cis/trans ratio up to 7:1) and the enantioselectivity (up to 96% ee; Table 1, entries 6 and 7). Table 1. Evaluation of Brønsted acids 4a-4g in the enantioselective Nazarov cyclization. The scope of the Brønsted acid-catalyzed enantioselective Nazarov cyclization of various divinyl ketones 3 was explored under an optimized reaction condition (Scheme 2). Treatment of divinyl ketones 3 in CHCl3 in the presence of 2 mol% chiral BINOL-Ntriflylphosphoramide 4g at 0 oC for 1-6 h provided the corresponding cyclopentenone 5 in good yields (45-92%) with excellent enantioselectivities (up to 93% ee) (Scheme 2). Furthermore, the isomerization of cis-cyclopentenone under basic condition led to the corresponding trans-cyclopentenone without loss of enantiomeric purity. This efficient method introduced here was not only the first example of an organocatalytic electrocyclic reaction but also represented the first enantioselective activation of a carbonyl group catalyzed by a chiral BINOL phosphoric acid. Compared to the metal-catalyzed reaction, special features of this new Brønsted acid-catalyzed electrocyclization are the lower catalyst loadings (2 mol%), higher enantioselectivities, accessibility to all possible stereoisomers, as well as the mild conditions. ....
This thesis demonstrates the advancement of PELDOR spectroscopy beyond its original design of distance measurements in order to disentangle a maximum amount of information additionally encoded in the PELDOR data. In particular, the successful synthesis of novel polynitroxide radicals is described as well as the extraction of the relative orientation of spin labels, conformational flexibility and the separation of dipolar and exchange coupling via orientation selective PELDOR measurements in combination with PESIM based simulations. Moreover, the method of PELDOR "Spin Counting" was experimentally validated.
In the title compound, C30H34N2O6, the complete molecule is generated by a crystallographic 2/m symmetry operation. The 1-oxyl-3-pyrroline-3-carboxylate group lies on a mirror plane. The dihedral angle between the ring planes of the biphenyl fragment is constrained by symmetry to be zero, resulting in rather short intramolecular H...H contact distances of 2.02 Å. In the crystal, molecules are connected along the a-axis direction by very weak intermolecular methyl-phenyl C-H...[pi] interactions. The C-H bond is not directed to the center of the benzene ring, but mainly to one C atom [C-H...C(x - 1, y, z): H...C = 2.91 Å and C-H...C = 143°]. Key indicators: single-crystal X-ray study; T = 169 K; mean σC–C) = 0.002 Å ; R factor = 0.049; wR factor = 0.126; data-to-parameter ratio = 19.8.
In the production of integrated circuits (ICs), photolithography plays a key role in wafer structuring. The basic principle of photolithography is the selective processing of areas (etching, implantation, metallisation etc.) while the others are covered and therefore protected by the resist. After each process step the resist, now modified, has to be removed. In the history of semiconductor manufacturing this has been accomplished with a mixture of H2SO4 and H2O2, H2SO4 and O3 or a plasma etch. As the structure sizes decreased they reached a stage where they had to be exposed to light of shorter wavelengths for the photolithography, going from i-line (365 nm) to DUV (248 nm and 193 nm). This change in wavelength now requires new resists and therewith new stripping methods. Beside the changes in the resist the finer structures are also more sensitive to damages caused by the resist strip. Along with this the demand for cost reduction and environment-friendliness poses a big challenge for modern resist stripping. In this study ozone in deionised water (DI/O3) was the basic chemistry investigated as it is cost efficient in production and disposal as well as environment friendly. Furthermore it is a chemistry known to cause no damage to the wafers. DI/O3 has been successfully applied to strip i-line resists. The challenge now is to find ways and means to make DI/O3 strip even highly implanted DUV resists which currently can only be removed by a plasma etch. To achieve this a detailed understanding of the behaviour of ozone in DI water and the influence of factors both chemical and physical on the stripping efficiency at the different stages in the process is necessary. Along with this, methods which enable the elucidation of resist structures and the changes they undergo during the process of photolithography as well as during the ozone strip have to be developed. This will enable us to understand the mechanisms involved and hence, ideally, develop ozone-based stripping solutions customized for each resist and process step. For this purpose the ozone decomposition in DI water with and without additives was studied via UV-Vis spectroscopy. Radicals generated within the ozone decomposition were trapped and quantified, the resists were studied directly on the wafer with IR and Raman spectroscopy and stripped with DI/O3-mixtures and different setups to find optimum conditions for a complete and damage free resist strip. UV-Vis spectroscopy at 260 nm was used to study ozone decomposition and the factors, both chemical and physical, which influence it. These factors are pH, different additives at the same pH, temperature and mixing of the solution. For the radical determination trapping reactions with MeOH and DMSO both forming CH2O which is further converted to DDL as the detectable species were compared with a variation of the classical iodometric titration acting as an absolute method without the need of calibration. IR spectroscopy proved to be a suitable method for the structural characterisation of the resists and the tracking of the changes undergone during the various processing steps as well as the ozone based stripping. For the stripping with DI/O3 IR spectroscopy delivered well-defined spectra. These displayed significant peak changes which support the assumption of classical ozonolysis as the decomposition mechanism for the unimplanted resist. For the study of the resist crust originating from ion implantation IR was fundamentally unsuitable and was replaced by Raman spectroscopy and microscopy. Raman spectra showed the crust to be of a highly carbon containing structure. Regrettably, the peak assignable to the crust was too broad for the exact composition of the crust to be determined. The wavelength region of the peak corresponds to that of peaks of glassy carbon and highly ordered and conventional graphite. Such a broad peak suggests that the structure of the crust is not uniform but contains more than one carbon modification. As the purpose of all these studies is to enable or improve DI/O3 based resist stripping on unimplanted as well as high-dose implanted resists the removal efficiency of DI/O3 spiked with different additives that alter the pH was studied. For these unimplanted resists the maximum efficiency could be achieved at pH = 5 – 7. Lowering or increasing the pH beyond this range gave poor results. The stripping of highly implanted resists could be achieved only at harsh conditions with a high pH-level of 12 - 13 with a narrow process window showing no stripping at lower pHs and severe damages at higher levels. The principle application of DI/O3 stripping chemistry could be proved but the currently required process time unfortunatelly is too long for commercial application and needs further optimisation.
Based on the commonly used and well-established state-of-the-art DNA sequencing method, i. e. Sanger sequencing, the major target of future research is to develop a fast, cost-effective and gelelectrophoresis-free sequencing method. The aim of the new sequencing technologies is to detect DNA mutations faster and more accurate in order to develop individual therapies for patients (personalized medicine). For this purpose, a lot of novel sequencing techniques like pyrosequencing, mass-spectrometry-assisted sequencing, sequencing by hybridization etc. have been put into practice and already led to commercialized sequencers. The sequencing technology we were mostly interested in is the so-called sequencing-by-synthesis method (SBS). This PhD thesis covers the synthesis of modified nucleosides – the so-called reversible terminators – and their evaluation as reversible terminators. These 3′-modified and dye-labeled nucleotides are incorporated by the polymerase into the DNA-template, then the DNA-synthesis is stopped. After detection of the fluorescent signal, the reversible terminator has to be cleavable in a way (i. e. the polymerase-blocking modification) that the DNA-synthesis can continue. As a result of the polymerase-acceptance tests that have been carried out with the two triphosphates cyanoethoxymethyl(CEM)-dTTP and cyanoethyl(CE)-dTTP as substrates it became clear that the latter one was better incorporated than the first one. Based on this knowledge all four key compounds for the whole reversible terminators possessing the cyanoethyl (CE) group where synthesized within this PhD thesis. Additionally to the synthesis of the modified key compounds, the cleavability of the cyanoethyl function had to be evaluated which is an essential requirement of a reversible terminator for SBS. For addressing this issue, three different CE- and CEM modified monophosphates were created. For each of these three monophosphates an individual synthetic strategy has been developed within this PhD work, each of these strategies and subsequent phosphorylation led to the desired modification. These previously unknown model compounds mimicking the solubility of short oligonucleotides were employed the for qualitative cleavage experiments after their purification and spectroscopical characterization. With these three monophosphates suitable cleavage conditions for a quantitative removal of the CE and the CEM group were examined. In case of the CE function we selectively improved the cleavage conditions while varying the solvent, the reaction temperature as well as the amount of cleaving agent used, in order to make the conditions applicable for an SBS experiment. Due to the fact that the CE function was the most important modification for our SBS experiment, we could even optimize the cleavage efficiency by employing co-solvents like DMSO or DMF. An additional cleavage experiment was carried out by using a short CE-modified oligomer which led to further results that were comparable to the ones obtained from the cleavage experiments of the monomers. One big difference is the required amount of TBAF as cleaving agent for the quantitative removal of the CE-modification from the oligomer. In this case, 7500 equivalents of TBAF are needed for complete CE cleavage at 45 °C compared to the amount of 40 to 80 equivalents TBAF for the monomer (monophosphate). As a conclusion of this result we assume that the amount of cleaving agent and the solubility of the oligomer plays an important role in the CE cleavage efficiency. This assumption was already supported by Saneyoshi et al. who demonstrated for CE-modified RNA oligonucleotides that the CE-cleavage rate is strongly lowered with the increasing of the oligomer length. Thus we could demonstrate that the CE function is quantitatively removable from an oligomer without destroying it. With these results in hands we could prove that the CEM and the CE group are quantitatively cleavable and therefore applicable as blocking groups for reversible terminators. The conditions for the CE cleavage are used for the ArraySBS-“proof-of-principle” which is currently under investigation.
The six-membered ring of the title compound, C11H16NO, has a distorted envelope conformation. The piperidine N atom deviates by 0.128 (1) Å from the plane through its three neighbouring atoms. In the crystal structure, molecules are connected by intermolecular Cethynyl-H...O contacts to form chains extending in the [10\overline{1}] direction. Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.001 Å ; R factor = 0.040; wR factor = 0.112; data-to-parameter ratio = 27.3.
The five-membered ring of the title compound, C10H14NO, is almost planar [mean deviation from best plane = 0.006 (1) Å]. The N-O bond is in the plane of the five-membered ring. The molecule is positioned about a pseudo-mirror plane at y = 0.375. In the crystal, molecules are connected by intermolecular C-H...O contacts into layers parallel to (010). Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.002 Å; R factor = 0.062; wR factor = 0.157; data-to-parameter ratio = 27.3.
Na+/H+ antiporters are ubiquitous membrane proteins involved in ion homeostasis and pH sensing. The amino acid sequence of one such antiporter, MjNhaP1, from Methanococcus jannaschii, shows a significant homology to eukaryotic sodium proton exchangers like NHE1 from Homo sapiens and SOS1 of Arabidopsis thaliana than to the well-characterized Escherichia coli NhaA or NhaB. MjNhaP1 shows activity at acidic pH unlike NhaA, which is active at basic pH. 13 transmembrane helices have been predicted to be present in NhaP1. A projection map, calculated by Cryo-EM of 2D crystals of MjNhaP1 grown at pH 4, showed it to be a dimer containing elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core (Vinothkumar et al., 2005). Incubation of 2D crystals at pH 8 on the EM grid resulted in well-defined conformational changes, clearly evident in a difference map as a major change in density distribution within the helix bundle (Vinothkumar et al., 2005). The aim of this dissertation is to understand the working mechanism of MjNhaP1 by determining its three-dimensional structure. The aim was initially approached by structure determination by X-ray crystallography. The limitation for this method was the low expression yield, which was 0.5–0.7mg/ml (Vinothkumar et al., 2005). After various optimization trials, the expression yield of the recombinant protein could be elevated to 2-2.5mg of pure protein per litre of culture by the method of autoinduction (Studier et al., 2005). To obtain well diffracting 3D crystals, purification conditions (Vinothkumar et al., 2005) were modified. 3D crystals were obtained under various conditions, which has so far not diffracted X-Ray beyond 8Å. Parallely, optimization of parameters (Vinothkumar et al., 2005) for 2D crystals formation was carried out. A combination of 1% DDM used for lipid solubilization, and 1% OG in the buffer of the purified protein produced 1-2 μm wide tubular 2D crystals of NhaP1. This batch of crystal proved to be the optimal for data collection at higher tilt angle with the electron microscope. A 3D map showed p22121 symmetry and revealed a tight dimer with an oval shape. The region in the central part of the dimer is composed of several tilted helices forming an interface between both monomers. On either side of the dimer interface, a group of six tightly packed helices form a bundle. This bundle contains three straight helices in the centre of the monomer and three helices in the periphery. Comparison of the structures of E.coli NhaA and M. jannaschii NhaP1 show substantial differences in length and slope of corresponding helices between both antiporters. A 3D model of NhaP1 based on the 3D map revealed 13 helices, which has been named as A-M to distinguish it from the NhaA helices. Overlaying the X-ray structure onto the 3D map revealed that the disrupted helices IV and XI of NhaA superimpose two central helices at similar position in the 3D map of NhaP1. The disrupted helices IV and XI in the X-ray structure of NhaA have been proposed as the putative ion-binding and translocation site (Hunte C et al, 2005; Arkin IT et al, 2007; Screpanti & Hunte (2007). This motif appears to be present also in NhaP1, as suggested by the close fit of NhaA helices IV and XI on the putative helices E and L of the NhaP1 model. These two putative helices E and L in NhaP1 contain the highly conserved TDP and GPRVVP motif, which are crucial for antiporter activity (Hellmer et al., 2002, Hellmer et al., 2003). In the overlay, helix V of NhaA containing the two essential, conserved aspartates D163 and D164 fits the density of the putative helix F of NhaP1, which contains the conserved motif FNDP. The homologous D161 in the FNDP motif of NhaP1 is essential for transport activity as show by mutagenesis (Hellmer at al., 2003). Significant differences are visible in the region of the dimer interface of the 3D map of NhaP1 occupied by helices VI, VII, and VIII in NhaA. This region shows an extra helical density (A) in the 3D map of NhaP1. By alignment of MjNhaP1 sequence with the amino acid sequences of several Na+/H+ exchangers, it was evident that the additional helix (A) is located in the N terminus of NhaP1. In our sequence alignment, a putative hydrophobic segment corresponding to this additional helix A is present in other archaeal and eukaryotic antiporters but not in any of the bacterial ones. The N-terminus of the human Na+/H+ exchanger NHE1 has been predicted to contain a highly hydrophobic signal peptide. This indicates the probability of the N-terminal helix A of NhaP1 to be an uncleaved signal peptide. Besides being a signal sequence targeting NhaP1 to the membrane, the map suggests that this helix might be involved in the formation of dimer contacts between both monomers. A gene duplication event is evident in the 3D map of NhaP1, as not only the helices D, E, F and K, L, M are related by an inverted repeat but also the helices B, C and I, J are related. We present here the three-dimensional architecture of a Na+/H+ antiporter from archaea. The presence of the 13th helix suggests the location of the N-terminus to be located in the cytosol and the C-terminus in the periplasm. This would orient NhaP1 in an inverted manner in the membrane in comparison to NhaA. Further structural information at higher resolution and biochemical and biophysical investigations are required to confirm the topology.
1. Fab co-complexes of proton pumping NADH:ubiquinone oxidoreductase (complex I) Fab fragments suitable for co-crystallization with complex I were generated using an immobilized papainbased protocol. The binding of the antibody fragments to complex I was verified using Surface Plasmon Resonance and size exclusion chromatography. The binding constants of the antibodies and their respective Fab fragments were found to be in the nanomolar range. This work presents the first report on successful crystallization of complex I (proton pumping NADH:ubiquinone oxidoreductase) from Yarrowia lipolytica with proteolytic Fab fragments. The quality of the crystals was significantly improved when compared to the initial experiments and the best crystals diffracted X-rays to a resolution of ~7 Å. The activity of complex I remained uninfluenced by antibody fragment binding. The initial diffraction data suggest that the complex I/Fab co-complex crystals represent a space group different to the one observed for the native protein. Ongoing experiments are aimed at further enhancements of the diffraction quality of the crystals. Providing a different space group the CI/Fab co-complexes may become a very useful approach for structure determination of the enzyme. Moreover, the bound Fab offers an additional possibility to generate phase information. The antibody-mediated crystallization represents a valuable tool in structural characterization of the NADH:oxidoreductase subcomplexes or even single subunits. 2. UDP-glucose pyrophosphorylase UDP-glucose pyrophosphorylase from Yarrowia lipolytica displays affinity towards Ni2+ NTA and was first detected in a contaminated sample of complex I. Following, separation from complex I, Ugp1p was purified using anion exchange chromatography. Sequence similarity studies revealed high identity to other known pyrophosphorylases. As indicated by laser-based mass spectrometry method (LILBID) Ugp1p from Y. lipolytica builds octamers similarly to the enzyme from Saccharomyces cerevisiae. The initial crystals grew as thin needles favorably in sitting drop setups. The size of the crystals was increased by employment of a micro batch technique. The improved crystals diffracted X-rays to a resolution of 3.2 Å at the synchrotron beamline. Structural characterization is under way using a molecular replacement approach based on the published structure of baker’s yeast UGPase.
P2X receptors represent the third superfamily of ligand gated ion channels with ATP as their natural ligand. Most of the mammalian P2X receptors are non-selective cation channels, which upon activation, mediate membrane depolarization and have physiological roles ranging from fast excitatory synaptic transmission, modulation of pain-sensation, LTP to apoptosis etc. In spite of them being an attractive drug target, their potential as a drug target is limited by the lack of basic understanding of the structure-function relationship of these receptors. In my thesis, I have investigated the behavior of homomeric P2X receptor subunits with the help of photolabeling and fluorescence techniques coupled to electrophysiological measurements using Xenopus laevis oocytes heterologous expression system. Concurrent photolabeling by BzATP and current recordings from the same set of receptors in real time has revealed that the gating process in homomeric P2X receptors is contributed individually by each subunit in an additive manner. Our study for the first time describes the agonist potency of Alexa-ATP (a fluorescent ATP analog) on P2X1 receptors. The use of Alexa-ATP in our experiments elucidated that receptor subunits are not independent but interacting with each other in a cooperative manner. The type of cooperativity, however, depended on the type and concentrations of allosteric/competing ligands. Based on our results, in my thesis we propose an allosteric model for ligand-receptor interactions in P2X receptors. When simulated, the model could replicate our experimental findings thus, further validating our model. Further, correlation between occupancy of P2X1 receptors (determined using binding curve for Alexa-ATP) with the steady-state desensitization suggests that binding of three agonist molecules per receptor are required to desensitize P2X1 receptors. We further extended the approach of fluorescence with electrophysiological measurement to assign the role for different domains in P2X1 receptors with the help of environmental sensitive, cysteine reactive fluorophore (TMRM). Cysteine rich domain-1 of P2X1 receptors (C117-C165) was found to be involved in structural rearrangements after agonist and antagonist binding. In contrast to the present understanding, that the binding of an antagonist cannot induce desensitization in P2X1 receptors and the receptors need to open first before undergoing desensitization, we propose based on our results that a competitive antagonist can also induce desensitization in P2X1 receptors by bypassing the open state. We have attempted to answer few intriguing questions in the field of P2X receptor research and we think that our answers provide many avenues to the basic understanding of functioning of P2X receptors.
Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.
Large amplitude intramolecular motions in non-rigid molecules are a fundamental issue in chemistry and biology. The conventional approaches for study these motions by far-infrared and microwave spectroscopy are not applicable when the molecule is non-polar. Therefore, in the current thesis an alternative approach for the investigation of large amplitude intramolecular motions was developed and tested. This new method is based on femtosecond rotational degenerate four-wave mixing spectroscopy (fs DFWM), which is a particular implementation of rotational coherence spectroscopy. The method was successfully applied for the investigation of pseudorotation in pyrrolidine and the ring-puckering vibration in cyclopentene. Another important subject is the photophysics of molecules and molecular clusters which have an ultrashort lifetime of their electronically excited state (photoreactivity). These ultrashort lifetimes often represent a protective mechanism causing photostability. The photoreactivity is usually the manifestation either of an “elementary” reaction, such as proton or electron transfer, which occurs in the excited state or of a fast non-radiative deactivation processes, such as internal conversion via conical intersection of the electronically excited and ground state. Due to a short-lived excited state, the conventional vibrational spectroscopic methods, such as IR depletion detected by resonance two-photon ionization spectroscopy (IR/R2PI), are not applicable for the structural investigation of these systems. Therefore, new approach, termed IR depletion detected by multiphoton ionization with femtosecond laser pulses (IR/fsMPI), was developed for studying the structure of photoreactive microsolvated molecules. The IR/fsMPI technique was applied for investigating the clusters of 1H-pyrrolo[3,2-h]quinoline with water/methanol as well as adenine- and 9-methyl-adenine-hydrates. In addition, the excited state dynamics of bifunctional azaaromatic molecule 7-(2'-pyridyl)indole (7PyIn) was studied by femtosecond pump-probe resonance excitation multiphoton ionization technique (fs REMPI). Under electronic excitation of this molecule a fast proton transfer (phototautomerization) takes place, which is followed by radiationless excited state deactivation process. The fs REMPI spectra lead to the conclusion that the phototautomerization in 7PyIn is coupled with a twisting of the molecule, and that the twisting provides an efficient channel for ultrafast radiationless excited state deactivation. This pattern of excited-state tautomerization/deactivation might be quite general.
By adopting a variety of shapes, proteins can perform a wide number of functions in the cell, from being structural elements or enabling communication with the environment to performing complex enzymatic reactions needed to sustain metabolism. The number of proteins in the cell is limited by the number of genes encoding them. However, several mechanisms exist to increase the overall number of protein functions. One of them are post-translational modifications, i.e. covalent attachment of various molecules onto proteins. Ubiquitin was the first protein to be found to modify other proteins, and, faithful to its evocative name, it is involved in nearly all the activities of a cell. Ubiquitylation of proteins was believed for a long time only to be responsible for proteasomal degradation of modified proteins. However, with the discovery of various types of ubiquitylation, such as mono-, multiple- or poly-ubiquitylation, new functions of this post-translational modification emerged. Mono-ubiquitylation has been implicated in endocytosis, chromatin remodelling and DNA repair, while poly-ubiquitylation influences the half-life of proteins or modulates signal transduction pathways. DNA damage repair and tolerance are example of pathways extensively regulated by ubiquitylation. PCNA, a protein involved in nearly all types of DNA transaction, can undergo both mono- and poly-ubiquitylation. These modifications are believed to change the spectrum of proteins that interact with PCNA. Monoubiquitylation of PCNA is induced by stalling of replication forks when replicative polymerases (pols) encounter an obstacle, such as DNA damage or tight DNA-protein complexes. It is believed that monoubiquitylation of PCNA stimulates the exchange between replicative pols to one of polymerases that can synthesize DNA across various lesions, a mechanism of damage tolerance known as translesion synthesis (TLS). Our work has helped to understand why monoubiqutylation of PCNA favours this polymerase switch. We have identified two novel domains with the ability to bind Ub non-covalently. These domains are present in all the members of Y polymerases performing TLS, and were named Ub-binding zinc finger (UBZ) (in polη and polκ) and Ub-binding motif (UBM) (in polι and Rev1). We have shown that these domains enable Y polymerases to preferentially gain access to PCNA upon stalling of replication, when the action of translesion polymerases is required. While the region of direct interaction between Y pols and PCNA had been known (BRCT domain in Rev1 and PIP box motif (PIP) in three others members), we propose that Ub-binding domains (UBDs) in translesion Y pols enhance the PIP- or BRCT-domain-mediated interaction between these polymerases and PCNA by binding to the Ub moiety attached onto PCNA. Following these initial studies, we have also discovered that Y polymerases themselves undergo monoubiquitylation and that their UBDs mediate this modification. This auto-ubiquitylation is believed to lead to an intramolecular interaction between UBD and Ub attached in cis onto the UBD-containing protein. We have mapped monoubiquitylation sites in polη in the C-terminal portion of the protein containing the nuclear localization signal (NLS) and the PIP box. Beside PIP, the NLS motif is also involved in direct interaction of polη with PCNA. Based on these findings, we propose that monoubiquitylation of either NLS or PIP masks them from potential interaction with PCNA. Lastly, using several functional assays, we have demonstrated the importance of all these three motifs in the C-terminus of polη (UBZ, NLS and PIP) for efficient TLS. We have also constructed a mimic of monoubiquitylated polη by genetically fusing polη with Ub. Interestingly, this chimera is deficient in TLS as compared to the wild-type protein. Altogether, these studies demonstrate that the C-terminus of polη constitutes a regulatory module involved in multiple-site interaction with monoubiquitylated PCNA, and that monoubiquitylation of this region inhibits the interaction between polη and PCNA. Our work has also revealed that the UBDs of Y pols as well as of other proteins implicated in DNA damage repair and tolerance, such as the Werner helicase-interacting protein 1 (Wrnip1), are required for their proper sub-nuclear localization. All these proteins localize to discrete focal structures inside the nucleus and mutation of their UBDs results in inability to accumulate in these foci. Interestingly, by exchanging UBDs between different proteins we have learned that each UBD seems to have a distinct functional role, surprisingly not limited to Ubbinding ability. In fact, swapping the UBZ of Wrnip1 with the UBM of polι abolished the localization of Wrnip1 to foci despite preserving the Ub-binding ability of the chimeric protein. In summary, this work provides an overview of how post-translation modification of proteins by Ub can regulate several DNA transactions. Firstly, key regulators (e.g. PCNA) can be differentially modified by Ub. Secondly, specialized UBDs (e.g. UBM, UBZ) embedded only in a subset of proteins act as modules able to recognize these modifications. Thirdly, by means of mediating auto-ubiquitylation, UBDs can modulate the behaviour of host proteins by allowing for either in cis or in trans Ub-UBD interactions.
High-resolution NMR structure of an RNA model system : the 14-mer cUUCGg tetraloop hairpin RNA
(2009)
We present a high-resolution nuclear magnetic resonance (NMR) solution structure of a 14-mer RNA hairpin capped by cUUCGg tetraloop. This short and very stable RNA presents an important model system for the study of RNA structure and dynamics using NMR spectroscopy, molecular dynamics (MD) simulations and RNA force-field development. The extraordinary high precision of the structure (root mean square deviation of 0.3 Å) could be achieved by measuring and incorporating all currently accessible NMR parameters, including distances derived from nuclear Overhauser effect (NOE) intensities, torsion-angle dependent homonuclear and heteronuclear scalar coupling constants, projection-angle-dependent cross-correlated relaxation rates and residual dipolar couplings. The structure calculations were performed with the program CNS using the ARIA setup and protocols. The structure quality was further improved by a final refinement in explicit water using OPLS force field parameters for non-bonded interactions and charges. In addition, the 2'-hydroxyl groups have been assigned and their conformation has been analyzed based on NOE contacts. The structure currently defines a benchmark for the precision and accuracy amenable to RNA structure determination by NMR spectroscopy. Here, we discuss the impact of various NMR restraints on structure quality and discuss in detail the dynamics of this system as previously determined.
Photo-initiated processes, like photo-excitation and -deexcitation, internal conversion, excitation energy transfer and electron transfer, are of importance in many areas of physics, chemistry and biology. For the understanding of such processes, detailed knowledge of excitation energies, potential energy surfaces and excited state properties of the involved molecules is an essential prerequisite. To obtain these informations, quantum chemical calculations are required. Several quantum chemical methods exist which allow for the calculation of excited states. Most of these methods are computationally costly what makes them only applicable to small molecules. However, many biological systems where photo-processes are of interest like light-harvesting complexes in photosynthesis or the reception of light in the human eye by rhodopsin are quite large. For large systems, however, only few theoretical methods remain applicable. The currently most widely used method is time-dependent density functional theory (TD-DFT), which can treat systems of up to 200–300 atoms with the excitation energies of some excited states exhibiting errors of less than 0.5 eV. Yet, TD-DFT has several drawbacks. The most severe failure of TD-DFT is the false description of charge transfer states which is particularly problematic in case of larger systems where it yields a multitude of artificially low-lying charge transfer states. But also Rydberg states and states with large double excitation character are not described correctly. Still, if these deficiencies are kept in mind during the interpretation of results, TD-DFT is a useful tool for the calculation of excited states. In my thesis, TD-DFT is applied in investigations of excitation energy and electron transfer processes in light-harvesting complexes. Since light-harvesting complexes, which consist of thousands of atoms, are by far too large to be calculated, model complexes for the processes of interest are constructed from available crystal structures. The model complexes are used to calculate potential energy curves along meaningful reaction coordinates. Artificial charge transfer states are corrected with the help of the so-called ∆DFT method. The resulting potential energy curves are then interpreted by comparison with experimental results. For the light-harvesting complex LH2 from purple bacteria the experimentally observed formation of carotenoid radical cations is studied. It is shown that the carotenoid radical cation is formed most likely via the optically forbidden S1 state of the carotenoid. In light-harvesting complex LHC-II of green plants the fast component of the so-called non-photochemical quenching (NPQ) is investigated. Two of several different hypotheses on the mechanism of NPQ, which have been proposed recently, are studied in detail. The first one suggests that NPQ proceeds via simple replacement of violaxanthin by zeaxanthin in the binding pocket in LHC-II. However, the calculated potential energy curves exhibit no difference between violaxanthin and zeaxanthin in the binding pocket. In combination with experimental results it is thus shown that simple replacement alone does not mediate NPQ in LHC-II. The second hypothesis proposes conformational changes of LHC-II that lead to quenching at the central lutein and chlorophyll molecules during NPQ. My TD-DFT calculations demonstrate that if this mechanism is operative, only the lutein 1 which is one of two central luteins present in LHC-II can take part in the quenching process. This is corroborated by recent experiments. Though several conclusions can be drawn from the investigations using TD-DFT, the interpretability of the results is limited due to the deficiencies of the method and of the models. To overcome the methodological deficiencies, more accurate methods have to be employed. Therefore, the so-called algebraic diagrammatic construction scheme (ADC) is implemented. ADC is a widely overlooked ab initio method for the calculation of excited states, which is based on propagator theory. Its theoretical derivation proceeds via perturbation expansion of the polarization propagator, which describes electronic excitations. This yields separate schemes for every order of perturbation theory. The second order scheme ADC(2), which is employed here, is the equivalent to the Møller-Plesset ground state method MP(2), but for excited states. It represents the computationally cheapest excited state method which can correctly describe doubly excited states, as well as Rydberg and charge transfer states. The quality of ADC(2) results is demonstrated in calculations on linear polyenes which serve as model systems for the larger carotenoid molecules. The calculations show that ADC(2) describes the three lowest excited states of polyenes sufficiently well, particularly the optically forbidden S1 state which is known to possess large double excitation character. Yet, the applicability of the method is limited compared to TD-DFT due to the much larger computational requirements. To facilitate the calculation of larger systems with ADC(2) a new variant of the method is developed and implemented. The variant employs the short-range behavior of electron correlation to reduce the computational effort. As a first step, the working equations of ADC(2) are transformed into a basis of local orbitals. In this basis negligible contributions of the equations which are due to electron correlation can be identified based on the distances of local orbitals. A so-called “bumping” scheme is implemented which removes the negligible parts during a calculation. This way, the computation times as well as the disk space requirements can be reduced. With the “bumping” scheme several new parameters are introduced that regulate the amount of “bumping” and thereby the speed and the accuracy of computations. To determine useful values for the parameters an evaluation is performed using the linear polyene octatetraene as test molecule. From the evaluation an optimal set of parameter values is obtained, so that the computation times become minimal, while the errors in the excitation energies due to the “bumping” do not exceed 0.15 eV. With further calculations on various molecules of different sizes it is tested if these parameter values are universal, i.e. if they can be used for all molecules. The test calculations show that the errors in the excitation energies are below 0.15 eV for all test systems. Additionally, no trend is visible for the errors that their magnitude might depend on the system. In contrast, the amount of disregarded contributions in the calculations increases drastically with growing system size. Thus, the local variant of ADC(2) can be used in future to reliably calculate excited states of systems which are not accessible with conventional ADC(2).