Refine
Year of publication
- 2019 (48) (remove)
Document Type
- Article (48) (remove)
Has Fulltext
- yes (48) (remove)
Is part of the Bibliography
- no (48)
Keywords
Institute
- Biochemie und Chemie (48) (remove)
EDTA is commonly used as an efficient chelator of metal ion enzyme cofactors. It is highly soluble, optically inactive and does not interfere with most chemicals used in standard buffers making EDTA a common choice to generate metal-free conditions for biochemical and biophysical investigations. However, the controversy in the literature on metal-free enzyme activities achieved using EDTA or by other means called our attention to a putative effect of EDTA beyond chelation. Here, we show that EDTA competes for the nucleotide binding site of the nucleotide hydrolase dUTPase by developing an interaction network within the active site similar to that of the substrate. To achieve these findings, we applied kinetics and molecular docking techniques using two different dUTPases. Furthermore, we directly measured the binding of EDTA to dUTPases and to two other dNTPases, the Taq polymerase and MutT using isothermal titration calorimetry. EDTA binding proved to be exothermic and mainly enthalpy driven with a submicromolar dissociation constant considerably lower than that of the enzyme:substrate or the Mg:EDTA complexes. Control proteins, including an ATPase, did not interact with EDTA. Our findings indicate that EDTA may act as a selective inhibitor against dNTP hydrolyzing enzymes and urge the rethinking of the utilization of EDTA in enzymatic experiments.
Formation of the anteroposterior and dorsoventral body axis in Caenorhabditis elegans depends on cortical flows and advection of polarity determinants. The role of this patterning mechanism in tissue polarization after formation of cell-cell contacts is not fully understood. Here, we demonstrate that planar asymmetries are established during left-right symmetry breaking: Centripetal cortical flows asymmetrically and differentially advect anterior polarity determinants (aPARs) from contacts to the medial cortex, resulting in their unmixing from apical myosin. Contact localization and advection of PAR-6 requires balanced CDC-42 activation, while asymmetric retention and advection of PAR-3 can occur independently of PAR-6. Concurrent asymmetric retention of PAR-3, E-cadherin/HMR-1 and opposing retention of antagonistic CDC-42 and Wnt pathway components leads to planar asymmetries. The most obvious mark of planar asymmetry, retention of PAR-3 at a single cell-cell contact, is required for proper cytokinetic cell intercalation. Hence, our data uncover how planar polarity is established in a system without the canonical planar cell polarity pathway through planar asymmetric retention of aPARs.
(Coumarin‐4‐yl)methyl (c4m) and p‐hydroxyphenacyl (pHP)‐based compounds are well known for their highly efficient photoreactions, but often show limited solubility in aqueous media. To circumvent this, we synthesized and characterized the two new c4m and pHP‐based photoacid generators (PAGs), 7‐[bis(carboxymethyl)amino]‐4‐(acetoxymethyl)coumarin (c4m‐ac) and p‐hydroxyphenacyl‐2,5,8,11‐tetraoxatridecan‐13‐oate (pHP‐t), and determined their solubilities, stabilities and photolysis in aqueous media. The two compounds showed high solubilities in water of 2.77 mmol L−1±0.07 mmol L−1 (c4m‐ac) and 124.66 mmol L−1±2.1 mmol L−1 (pHP‐t). In basic conditions at pH 9, solubility increased for c4m‐ac to 646.46 mmol L−1±0.63 mmol L−1, for pHP‐t it decreased to 34.68 mmol L−1±0.62 mmol L−1. Photochemical properties of the two PAGs, such as the absorption maxima, the maximum molar absorption coefficients and the quantum yields, were found to be strongly pH‐dependent. Both PAGs showed high stabilities s24h ≥95 % in water for 24 h, but decreasing stability with increasing pH value due to hydrolysis. The present study contributes to a clearer insight into the synthesis, solubilities, stabilities, and photolysis of c4m and pHP‐based PAGs for further photochemical applications when high PAG concentrations are required, such as in polymeric foaming.
Background: Esophageal cancer (EC) is one of the deadliest cancers worldwide. The contemporary strong increase of the adenocarcinomas in Western countries and the high mortality rates require the intensification of prospective multinational studies.
Methods: Therefore, this global health issue has been chosen for the bibliometric review of the global publication output. As source for meta and citation data, the Web of Science has been used and Density Equalizing Maps were applied for visualization.
Results: 17,387 articles on EC could be identified. The years with publication and citation maxima correspond to the appearance of the most prolific articles. China is the most publishing country, followed by Japan and the USA. Germany and the UK ranked 4th and 5th. The analysis of the ratios articles and socio-economic parameters emphasizes the leading position of the Scandinavian countries and Japan. Here, the high-income countries come out on top. The high incidence regions are mainly represented by Chinese and Japanese research. The association of the publication output and the overall research funding could be shown.
Conclusions: A strengthened international network increasingly consisting of the scientifically best positioned countries as well as more of the high incidence countries worldwide is mandatory for future research. The findings deliver scientists, clinicians and decision makers backgrounds for future decisions all over the world.
Nanopores are key in portable sequencing and research given their ability to transport elongated DNA or small bioactive molecules through narrow transmembrane channels. Transport of folded proteins could lead to similar scientific and technological benefits. Yet this has not been realised due to the shortage of wide and structurally defined natural pores. Here we report that a synthetic nanopore designed via DNA nanotechnology can accommodate folded proteins. Transport of fluorescent proteins through single pores is kinetically analysed using massively parallel optical readout with transparent silicon-on-insulator cavity chips vs. electrical recordings to reveal an at least 20-fold higher speed for the electrically driven movement. Pores nevertheless allow a high diffusive flux of more than 66 molecules per second that can also be directed beyond equillibria. The pores may be exploited to sense diagnostically relevant proteins with portable analysis technology, to create molecular gates for drug delivery, or to build synthetic cells.
The nuclear farnesoid X receptor (FXR) and the enzyme soluble epoxide hydrolase (sEH) are validated molecular targets to treat metabolic disorders such as non‐alcoholic steatohepatitis (NASH). Their simultaneous modulation in vivo has demonstrated a triad of anti‐NASH effects and thus may generate synergistic efficacy. Here we report dual FXR activators/sEH inhibitors derived from the anti‐asthma drug Zafirlukast. Systematic structural optimization of the scaffold has produced favorable dual potency on FXR and sEH while depleting the original cysteinyl leukotriene receptor antagonism of the lead drug. The resulting polypharmacological activity profile holds promise in the treatment of liver‐related metabolic diseases.
Thiophenylazobenzene: an alternative photoisomerization controlled by lone‐pair⋅⋅⋅π interaction
(2019)
Azoheteroarene photoswitches have attracted attention due to their unique properties. We present the stationary photochromism and ultrafast photoisomerization mechanism of thiophenylazobenzene (TphAB). It demonstrates impressive fatigue resistance and photoisomerization efficiency, and shows favorably separated (E)‐ and (Z)‐isomer absorption bands, allowing for highly selective photoconversion. The (Z)‐isomer of TphAB adopts an unusual orthogonal geometry where the thiophenyl group is perfectly perpendicular to the phenyl group. This geometry is stabilized by a rare lone‐pair⋅⋅⋅π interaction between the S atom and the phenyl group. The photoisomerization of TphAB occurs on the sub‐ps to ps timescale and is governed by this interaction. Therefore, the adoption and disruption of the orthogonal geometry requires significant movement along the inversion reaction coordinates (CNN and NNC angles). Our results establish TphAB as an excellent photoswitch with versatile properties that expand the application possibilities of AB derivatives.
Rhodopsins are the most universal biological light-energy transducers and abundant phototrophic mechanisms that evolved on Earth and have a remarkable diversity and potential for biotechnological applications. Recently, the first sodium-pumping rhodopsin KR2 from Krokinobacter eikastus was discovered and characterized. However, the existing structures of KR2 are contradictory, and the mechanism of Na+ pumping is not yet understood. Here, we present a structure of the cationic (non H+) light-driven pump at physiological pH in its pentameric form. We also present 13 atomic structures and functional data on the KR2 and its mutants, including potassium pumps, which show that oligomerization of the microbial rhodopsin is obligatory for its biological function. The studies reveal the structure of KR2 at nonphysiological low pH where it acts as a proton pump. The structure provides new insights into the mechanisms of microbial rhodopsins and opens the way to a rational design of novel cation pumps for optogenetics.
The industry‐scale production of methylchloromonosilanes in the Müller–Rochow Direct Process is accompanied by the formation of a residue, the direct process residue (DPR), comprised of disilanes MenSi2Cl6‐n (n=1–6). Great research efforts have been devoted to the recycling of these disilanes into monosilanes to allow reintroduction into the siloxane production chain. In this work, disilane cleavage by using alkali and alkaline earth metal salts is reported. The reaction with metal hydrides, in particular lithium hydride (LiH), leads to efficient reduction of chlorine containing disilanes but also induces disproportionation into mono‐ and oligosilanes. Alkali and alkaline earth chlorides, formed in the course of the reduction, specifically induce disproportionation of highly chlorinated disilanes, whereas highly methylated disilanes (n>3) remain unreacted. Nearly quantitative DPR conversion into monosilanes was achieved by using concentrated HCl/ether solutions in the presence of lithium chloride.
Archaea are motile by the rotation of the archaellum. The archaellum switches between clockwise and counterclockwise rotation, and movement along a chemical gradient is possible by modulation of the switching frequency. This modulation involves the response regulator CheY and the archaellum adaptor protein CheF. In this study, two new crystal forms and protein structures of CheY are reported. In both crystal forms, CheY is arranged in a domain-swapped conformation. CheF, the protein bridging the chemotaxis signal transduction system and the motility apparatus, was recombinantly expressed, purified and subjected to X-ray data collection.
The title compound, C4H9N5O2+·SO42−·H2O, is the monohydrate of the commercially available compound `C4H7N5O·H2SO4·xH2O'. It is obtained by reprecipitation of C4H7N5O·H2SO4·xH2O from dilute sodium hydroxide solution with dilute sulfuric acid. The crystal structure of anhydrous 2,4,5-triamino-1,6-dihydropyrimidin-6-one sulfate is known, although called by the authors 5-amminium-6-amino-isocytosinium sulfate [Bieri et al. (1993[Bieri, J. H., Prewo, R. & Linden, A. (1993). Private communication (refcode HACDEU). CCDC, Cambridge, England]). Private communication (refcode HACDEU). CCDC, Cambridge, England]. In the structure, the sulfate group is deprotonated, whereas one of the amino groups is protonated (R2C—NH3+) and one is rearranged to a protonated imine group (R2C=NH2+). This arrangement is very similar to the known crystal structure of the anhydrate. Several tautomeric forms of the investigated molecule are possible, which leads to questionable proton attributions. The measured data allowed the location of all hydrogen atoms from the residual electron density. In the crystal, ions and water molecules are linked into a three-dimensional network by N—H⋯O and O—H⋯O hydrogen bonds.
From a global viewpoint, a lot of time is spent within the indoor air compartment of vehicles. A German study on mobility has revealed that, on average, people spend 45 minutes per day inside vehicles. In recent years the number of cars has increased to around 43 million vehicles in private households. This means that more than one car can be used in every household. The ratio has been growing, especially in eastern Germany and rural areas. "Overall and especially outside the cities, the car remains by far number one mode of transport, especially in terms of mileage". Therefore, numerous international studies have addressed different aspects of indoor air hygiene, in the past years. In this paper, meaningful original studies on car indoor air pollution, related to VOCs, COx, PMs, microbials, BFRs, OPFRs, cigarettes, electronic smoking devices, high molecular weight plasticizer, and NOx are summarized in the form of a review. This present review aimed to summarize recently published studies in this important field of environmental medicine and points to the need for further studies with special recommendations for optimizing the interior air hygiene.
Resonance assignments are challenging for membrane proteins due to the size of the lipid/detergent-protein complex and the presence of line-broadening from conformational exchange. As a consequence, many correlations are missing in the triple-resonance NMR experiments typically used for assignments. Herein, we present an approach in which correlations from these solution-state NMR experiments are supplemented by data from 13C unlabeling, single-amino acid type labeling, 4D NOESY data and proximity of moieties to lipids or water in combination with a structure of the protein. These additional data are used to edit the expected peaklists for the automated assignment protocol FLYA, a module of the program package CYANA. We demonstrate application of the protocol to the 262-residue proton pump from archaeal bacteriorhodopsin (bR) in lipid nanodiscs. The lipid-protein assembly is characterized by an overall correlation time of 44 ns. The protocol yielded assignments for 62% of all backbone (H, N, Cα, Cβ, C′) resonances of bR, corresponding to 74% of all observed backbone spin systems, and 60% of the Ala, Met, Ile (δ1), Leu and Val methyl groups, thus enabling to assign a large fraction of the protein without mutagenesis data. Most missing resonances stem from the extracellular half, likely due intermediate exchange line-broadening. Further analysis revealed that missing information of the amino acid type of the preceding residue is the largest problem, and that 4D NOESY experiments are particularly helpful to compensate for that information loss.
Advanced colorectal carcinoma is currently incurable, and new therapies are urgently needed. We report that phosphotyrosine-dependent Eph receptor signaling sustains colorectal carcinoma cell survival, thereby uncovering a survival pathway active in colorectal carcinoma cells. We find that genetic and biochemical inhibition of Eph tyrosine kinase activity or depletion of the Eph ligand EphrinB2 reproducibly induces colorectal carcinoma cell death by autophagy. Spautin and 3-methyladenine, inhibitors of early steps in the autophagic pathway, significantly reduce autophagy-mediated cell death that follows inhibition of phosphotyrosine-dependent Eph signaling in colorectal cancer cells. A small-molecule inhibitor of the Eph kinase, NVP-BHG712 or its regioisomer NVP-Iso, reduces human colorectal cancer cell growth in vitro and tumor growth in mice. Colorectal cancers express the EphrinB ligand and its Eph receptors at significantly higher levels than numerous other cancer types, supporting Eph signaling inhibition as a potential new strategy for the broad treatment of colorectal carcinoma.
Objective: Inhaled particulate matter (PM) in secondhand smoke (SHS) is deleterious for smokers and non-smokers. Different additives in cigarettes might effect the amount of PM. This study aimed to assess the influence of additives on the PM emissions from different cigarette types in SHS.
Design: An experimental study of PM measuring in SHS of cigarettes without exposition of any person.
Method: The concentrations of PM (PM10, PM2.5 and PM1) in SHS of four different types of cigarettes of the brand Lucky Strike, two types with additives (Original Red, Original Blue) and two types without additives (Straight Red, Straight Blue), in comparison to the reference cigarette 3R4F were analysed. An automatic environmental tobacco smoke emitter generated SHS in an enclosed space with a volume of 2.88 m3. PM was measured with a laser aerosol spectrometer (Grimm model 1.109). Afterwards, the measuring values of the four Lucky Strike brands and the reference cigarette were statistically evaluated and visualised.
Results: Lucky Strike Straight Blue, a cigarette type without additives and lower tar amount, showed 10% to 25% lower PM mean values compared with the other tested Lucky Strike products, but 21% (PM1) respectively 27% (PM2.5,PM10) higher mean values than the reference cigarette. The PM mean of all measured smoke-free baseline values (clean air) was 1.6 µg/m³. It increased up to about 1800 µg/m³ for the reference cigarette and up to about 3070 µg/m³ for the Lucky Strike Original Blue.
Conclusions: The findings of this study show the massive increase of PM amount by smoking cigarettes in enclosed spaces and suggest that additives in tobacco products increase the PM amount in SHS. For validation, further comparative studies are necessary focusing on the comparison of the PM concentration of cigarettes with and without additives.
Implications: Due to the exposure to SHS, 890 000 people die each year worldwide. PM in SHS endangers the health of both non-smokers and smokers. This study considers the effect of additives like aromatics and humectant agents in cigarettes on PM in SHS. Do additives in tobacco products increase the amount of PM?
Corneal topometric, aberrometric and biomechanical parameters in mucopolysaccharidosis patients
(2019)
Aims: To report corneal topometric and aberrometric values in mucopolysaccharidosis (MPS) and to investigate their correlation with biomechanical corneal parameters.
Methods: One randomly chosen eye of 20 MPS patients with no to moderate corneal clouding and one eye of 23 healthy controls with comparable age were prospectively included into this study. Corneal surface regularity was assessed by index of surface variance (ISV), -vertical asymmetry (IVA), -height asymmetry (IHA), -height decentration (IHD); keratoconus index (KI), central keratoconus index (CKI) and Zernike indices of anterior and posterior corneal surface using Scheimpflug imaging (Pentacam). Corneal resistance factor (CRF) and corneal hysteresis (CH) were assessed by Ocular Response Analyzer. Statistical analyses were performed using Mann-Whitney-Test and Spearman Correlation Coefficients.
Results: IVA, ISV, IHD, IHA, but not KI and CKI were significantly higher in MPS patients compared to age matched healthy controls. Spherical aberration and asphericity coefficients either at the anterior or at the posterior corneal surface differed significantly between both groups. The grade of the MPS-associated corneal opacity correlated significantly with ISV (rho = 0.52), IVA (rho = 0.54), IHA (rho = 0.57) and IHD (rho = 0.48). Density of the MPS-affected corneas correlated significantly with ISV (rho = 0.52), IVA (rho = 0.72), IHA (rho = 0.57), IHD (rho = 0.69), 3rd order horizontal trefoil aberration at the posterior (rho = 0.62) and anterior surface (rho = 0.48) as well as with CH (rho = 0.55) and CRF (rho = 0.57). Spherical aberration at the back surface correlated with CRF and CH in MPS and in healthy controls.
Conclusions: This is the first study analyzing shape of the corneal surface in MPS patients. Topometric indices of corneal asymmetry are significantly increased and correlate with MPS-related corneal opacity and density. Spherical aberration and asphericity coefficient at the front and at the back corneal surface differ significantly between MPS and healthy controls.
The inhalation of particulate matter (PM) in second-hand smoke (SHS) is hazardous to health of smokers and non-smokers. Tobacco strength (amount of tar, nicotine, and carbon monoxide) and different additives might have an effect on the amount of PM. This study aimed to investigate the influence of tobacco strength or additives on PM. Four cigarette types of the brand Marlboro with different strengths and with or without additives were analyzed in comparison to the 3R4F reference cigarette. SHS was generated by an automatic environmental tobacco smoke emitter (AETSE) in an enclosed space with a volume of 2.88 m³. PM concentrations (PM10, PM2.5, PM1) were measured with a laser aerosol spectrometer followed by statistical analysis. The two strongest Marlboro brands (Red and Red without additives) showed the highest PM concentrations of all tested cigarettes. The measured mean concentrations Cmean of PM10 increased up to 1458 µg/m³ for the Marlboro Red without additives (PM2.5: 1452 µg/m³, PM1: 1263 µg/m³). The similarly strong Marlboro Red showed very similar PM values. The second strongest type Marlboro Gold showed 36% (PM10, PM2.5) and 32% (PM1) lower values, respectively. The “lightest” type Marlboro Silver Blue showed 54% (PM10, PM2.5) or 50% (PM1) lower PM values. The results indicate that the lower the tar, nicotine, and carbon monoxide amounts, as well as the longer the cigarette filter, the lower are the PM levels. An influence of additives could not be determined.
Site-specific cleavage of RNAs derived from the PIM1 3′-UTR by a metal-free artificial ribonuclease
(2019)
Oligonucleotide conjugates of tris(2-aminobenzimidazole) have been reported previously to cleave complementary RNA strands with high levels of sequence and site specificity. The RNA substrates used in these studies were oligonucleotides not longer than 29-mers. Here we show that ~150–400-mer model transcripts derived from the 3′-untranslated region of the PIM1 mRNA reacted with rates and specificities comparable to those of short oligonucleotide substrates. The replacement of DNA by DNA/LNA mixmers further increased the cleavage rate. Tris(2-aminobenzimidazoles) were designed to interact with phosphates and phosphate esters. A cell, however, contains large amounts of phosphorylated species that may cause competitive inhibition of RNA cleavage. It is thus important to note that no loss in reaction rates was observed in phosphate buffer. This opens the way to in-cell applications for this type of artificial nuclease. Furthermore, we disclose a new synthetic method giving access to tris(2-aminobenzimidazoles) in multigram amounts.
High-resolution cryo-EM structures of respiratory complex I: Mechanism, assembly, and disease
(2019)
Respiratory complex I is a redox-driven proton pump, accounting for a large part of the electrochemical gradient that powers mitochondrial adenosine triphosphate synthesis. Complex I dysfunction is associated with severe human diseases. Assembly of the one-megadalton complex I in the inner mitochondrial membrane requires assembly factors and chaperones. We have determined the structure of complex I from the aerobic yeast Yarrowia lipolytica by electron cryo-microscopy at 3.2-Å resolution. A ubiquinone molecule was identified in the access path to the active site. The electron cryo-microscopy structure indicated an unusual lipid-protein arrangement at the junction of membrane and matrix arms that was confirmed by molecular simulations. The structure of a complex I mutant and an assembly intermediate provide detailed molecular insights into the cause of a hereditary complex I-linked disease and complex I assembly in the inner mitochondrial membrane.