Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
Für die vorliegende Arbeit wurden zur Analyse des Auger-Zerfalls kleiner Moleküle nach Photoionisation die aus der Zerfallsreaktion resultierenden Impuls- und Energiespektren von Photo- und Auger-Elektronen in Koinzidenz mit denen der ionischen Fragmente aufgenommen. Dies ermöglichte eine getrennte Betrachtung der während des Ionisationsschrittes und des Zerfallsschrittes dieses Prozesses besetzten Molekülzustände. Um weitere Einsicht in die Dynamik des Zerfalls zu erhalten, wurden vorhandene theoretische Modelle, welche insbesondere die Interaktion der durch die Reaktion produzierten geladenen Teilchen (Post Collision Interaction) einbeziehen, an die gemessenen Energiespektren angepasst. Dies ermöglichte die separate Betrachtung der im Ionisationsschritt besetzten Molekülzustände. So konnten die Emissionswinkelverteilungen der Photoelektronen im molekülfesten Koordinatensystem für jeden besetzten Anfangszustand einzeln betrachtet werden. Die Trennung der Endzustände des Zerfalls erfolgte über die Analyse des Spektrums der Ionen-Aufbruchsenergie (Kinetic Energy Release) und den Vergleich mit berechneten Potentialkurven der beitragenden Endzustände.
Durch die nach den Anfangszuständen separierte Betrachtung des Auger-Zerfalls wurde es auch möglich, die Auswirkungen dieser Zustände auf die Zerfallsdynamik zu analysieren. Dafür lieferte die Anpassung der Modellprofile die Lebensdauer des jeweiligen 1s-Lochzustandes in dem entsprechenden Zerfallskanal. Diese jeweiligen Lebensdauern eines jeden Zustandes wurden abhängig von verschiedenen Parametern mit einer Genauigkeit im Attosekunden-Bereich aus den Energiespektren der Photoelektronen ermittelt.
In the last two decades, new unpredicted charmonium-like states with extraordinary characteristics have been observed experimentally. These states also known as the XYZ states, e.g., the Y(4260) or the X(3872), are mostly interpreted as QCD allowed exotic hadrons. One of the leading hadron physics experiments in the world, the Beijing Electron Spectrometer III (BESIII) at the Beijing Electron-Positron Collider II (BEPCII) is aiming towards revealing the internal structure of these states. It has brought numerous breakthrough discoveries including the discovery of the charged Zc(3900). In order to understand the nature of the Y(4260) state and its decay patterns, an inclusive analysis is performed for different recoil systems (π+π−,K+K− and K±π∓) using the BESIII data samples for center of mass energies above 4 GeV collected between 2013 and 2019. The aim of this analysis is twofold: on one hand, we search for new unobserved charmonium-like decay channels using the missing mass technique and on the other hand, it provides an accurate inclusive cross section measurement for e+e−→X π+π−, with the X being the J/ψ, hc and ψ(2S), respectively. Two resonant structures, the Y(4220) and the Y(4390), are observed in the inclusive energy dependent Born cross section of e+e−→hc π+π−, which is consistent with the BESIII exclusive measurements. Moreover, the energy dependent cross section of e+e−→J/ψ π+π− is investigated, in which two resonances have consistently been observed with the previous BESIII exclusive studies, namely, the Y(4220) and the Y(4320). In the (K±π±) recoil system, possible Y(4260) open charm decay channels are investigated. Two enhancements are observed in the inclusive energy dependent cross section of e+e−→DD above 4.13GeV, which could possibly be the ψ(4160)and the ψ(4415).
The small photoreceptor Photoactive Yellow Protein (PYP) enters a reversible photocycle after excitation with blue light. The intermediate states are formed on timescales ranging from femtoseconds to seconds including chromophore isomerization and protonation as well as large structural rearrangements. To obtain local dynamic information the vibrational label thiocyanate (SCN) can be inserted site-specifically at any desired position in the protein by cysteine mutation and cyanylation. The label's CN stretch vibration is highly sensitive to polarity, hydrogen bonding interactions and electric fields and is spectrally well separated from the overlapping protein absorptions. During the course of this thesis it was impressively demonstrated that the successful incorporation of the SCN label at selected positions in PYP provides a powerful tool to study structure changes and dynamics during the photocycle and enhance the local information that are obtained by infrared (IR) spectroscopic methods. Hence the SCN-labeled protein mutants were studied under equilibrium (steady-state) and non-equilibrium conditions.
Examination of the SCN absorption by FTIR spectroscopy showed the influence of various local environments on the label for different locations in the dark state. The response of the label under illumination with blue light reveals information about structural changes in the signaling state. Additional information for both states were obtained by the vibrational lifetime of the CN vibration measured via ultrafast IR-pump-IR-probe experiments. This observable is particularly sensitive for solvent exposure of the label. Time-resolved IR spectroscopy proved to be an excellent method to follow the protein dynamics throughout most part of the photocycle on a hundreds of femtoseconds to milliseconds timescale. By close inspection of protein and chromophore dynamics in wildtype-PYP over nine decades in time, new insights into the changes leading to the proposed photocycle intermediates were obtained. The investigation of the SCN label allowed to follow the different transient structure changes with high local resolution. Depending on its position within the protein the response of the label provided additional information on the photocycle transitions.
The insights that are obtained by the different observables in the steady-state and by the reaction of the SCN label to formation of the different intermediate states during the photocycle contribute to an improved understanding of local, light-induced structure changes in the photoreceptor PYP. This comprehensive study demonstrated the potential provided by the application of SCN as IR label for investigation of protein dynamics.
Hofstadter-Hubbard physics
(2020)
The Hofstadter model, besides the Haldane and Kane-Mele models, is the most common tight-binding model which hosts topologically nontrivial states of matter. In its time-reversal-symmetric formulation the model can even describe topological insulators. Experimentally, the Hofstadter model was realized with ultracold quantum gases in optical lattices which is a wellcontrolled way to engineer quantum states of tight-binding Hamiltonians. Another established control parameter in ultracold quantum gases are twoparticle, on-site interactions, also known as Hubbard interactions. This work aims at introducing the reader to the concepts of topological states of matter, a collection of corresponding tight-binding models, and the methodology to treat interacting topological states with dynamical mean-field theory.We present recent results for inhomogeneous, interacting systems, spinimbalanced magnetic systems, propose experimental detection methods, and extensions to three-dimensional topological states.
Understanding the hadron spectrum is one of the primary goals of non-perturbative QCD. Many predictions have experimentally been confirmed, others still remain under experimental investigation. Of particular interest is how gluonic excitations give rise to states with constituent glue. One class of such states are hybrid mesons that are predicted by theoretical models and Lattice QCD calculations. Searching for and understanding the nature of these states is a primary physics goal of the GlueX experiment at the CEBAF accelerator at Jefferson Lab. A search for a JPC = 1−− hybrid meson candidate, the Y(2175), in φ(1020)π+π+ and φ(1020)f0(980) channels in photoproduction on a proton target has been conducted. A first measurement of non-resonant φ(1020)π+π+ and φ(1020)f0(980) total cross sections in photoproduction has been performed. An upper limit on the resonance production cross section for the Y (2175) → φ(1020)π+π+ and Y (2175) → φ(1020)f0(980) channels are estimated. Since the analysis essentially depends on the quality of the charged kaon identification, also an optimization of particle identification through an improvement of the energy loss estimation in the central drift chamber by a truncated mean method has been investigated.
Proteine sind die Maschinen der Zellen. Um die Funktionalität von zahlreichen zellulären Prozessen zu gewährleisten, müssen Kommunikationssignale innerhalb von Proteinen weitergeleitet werden. Die Weiterleitung einer Störung an einem Ort im Protein zu einer entfernten Stelle, an welcher sie strukturelle und/oder dynamische Änderungen auslöst, wird Allosterie genannt. Zunächst wurde Allosterie hauptsächlich mit großräumigen Konformationsänderungen in Verbindung gebracht, aber später entwickelte sich ein dynamischerer Blickwinkel auf Allosterie in Abwesenheit dieser großräumigen Konformationsänderungen. Die Idee eines allosterischen Pfades bestehend aus konservierten und energetisch gekoppelten Aminosäuren, welche die Signalweiterleitung zwischen entfernten Stellen im Protein vermitteln, entstand. Diese allosterischen Pfade wurden durch zahlreiche theoretische Studien in Zusammenhang mit Pfaden effizienten anisotropen Energieflusses gebracht. Der Energiefluss entlang dieser Netzwerke verknüpft allosterische Signalübertragung mit Schwingungsenergietransfer (VET - vibrational energy transfer). Die Großzahl der Forschungsarbeiten über dynamische Allosterie basiert auf theoretischen Methoden, weil nur wenige geeignete experimentelle Verfahren existieren. Um diesen essentiellen biologischen Prozess der Informationsübertragung besser verstehen zu können, ist die Entwicklung neuer und leistungsstarker experimenteller Instrumente und Techniken daher dringend erforderlich. Die vorliegende Dissertation setzt sich dies zum Ziel.
VET in Proteinen ist aufgrund der Proteingeometrie inhärent anisotrop. Alle globulären Proteine besitzen Kanäle effizienten Energieflusses, von denen vermutet wird, dass sie wichtig für Proteinfunktionen, wie die schnelle Ableitung von überschüssiger Wärme, Ligandenbindung und allosterische Signalweiterleitung, sind. VET kann mit zeitaufgelöster Infrarot (IR) Spektroskopie untersucht werden, bei welcher ein Femtosekunden Anregepuls eines Lasers Schwingungsenergie in ein molekulares System an einer bestimmten Stelle injiziert und ein, nach einem veränderbarem Zeitintervall folgender, IR Abfragepuls die Ausbreitung dieser Schwingungsenergie detektiert. Ein protein-kompatibler und universell einsetzbarer Chromophor, der die Energie eines sichtbaren Photons in Schwingungsenergie konvertiert, wird als Heizelement benötigt um langreichweitige VET Pfade in Proteinen kartieren zu können. Der Azulen (Azu) Chromophor eignet sich dafür, weil er nach Photoanregung des ersten elektronischen Zustandes durch ultraschnelle interne Konversion fast die gesamte injizierte Energie innerhalb von einer Picosekunde in Schwingungsenergie umwandelt. Eingebettet in die nicht-kanonische Aminosäure (ncAA - non-canonical amino acid) ß-(1-Azulenyl)-L-Alanine (AzAla), kann der Azu Rest in Proteine eingebaut werden. Die Ankunft der injizierten Schwingungsenergie an einer bestimmten Stelle im Protein kann mithilfe eines IR Sensors detektiert werden. Die Kombination aus Azu als VET Heizelement und Azidohomoalanine (Aha) als VET Sensor mit transienter IR (TRIR) Spektroskopie wurde schon erfolgreich an kleinen Peptiden in der Dissertation von H. M. Müller-Werkmeister getestet, die der vorliegenden Dissertation in den Laboren der Bredenbeck Gruppe vorausging.
Die Schwingungsfrequenz chemischer Bindungen ist hochempfindlich auf selbst kleine Änderungen der Konformation und Dynamik in der unmittelbaren Umgebung und kann mit IR Spektroskopie gemessen werden, z. B. mit Fourier Transform IR (FTIR) Spektroskopie. IR Spektroskopie bietet eine außergewöhnlich gute Zeitauflösung, die es ermöglicht, dynamische Prozesse in Molekülen auf einer Zeitskala von wenigen Picosekunden zu beobachten, wie z. B. die ultraschnelle Weiterleitung von Schwingungsenergie. Mit zweidimensionaler (2D)-IR Spektroskopie können die Relaxation von schwingungsangeregten Zuständen und strukturelle Fluktuationen um die schwingende Bindung untersucht werden. Allerdings geht die herausragende Zeitauflösung mit limitierter spektraler Auflösung einher. In größeren Molekülen mit zahlreichen Bindungen überlagern sich die Schwingungsbanden und die Ortsauflösung geht verloren. Um diese Limitierung zu überwinden, können IR Marker benutzt werden, chemische Gruppen, die in einer spektral durchsichtigen Region des Protein/Wasser Spektrums (1800 bis 2500 cm-1) absorbieren. Als ncAA können sie kotranslational in Proteine an einer gewünschten Stelle eingebaut werden und so ortsspezifische Informationen aus dem Proteininneren liefern. Aufgrund ihrer geringen Größe, eines relativ großen Extinktionskoeffizientens (350-400 M-1cm-1) und einer hohen Empfindlichkeit auf Änderungen in der lokalen Umgebung sind organische Azide (N3) wie zum Beispiel Aha besonders geeignete IR Marker. Aha kann als Methionin Analogon ins Protein eingebaut werden.
...
This Dissertation deals with the development of FAIR-relevant X-ray diagnostics based on the interaction of lasers and particle beams with matter. The associated experimental methods are supposed to be employed in the HIHEX-experiments in the HHT-cave of the GSI Helmholtz Center for Heavy-Ion Research GmbH (GSI) in Phase-0 and in the APPA-cave at the Facility for Antiproton and Ion Research in Darmstadt, Germany.
Diagnostic of high aerial density targets that will be used in FAIR experiments demands intense and highly penetrating X-ray sources. Laser generated well-directe relativistic electron beams that interact with high Z materials is an excellent tool for generation of short-pulse high luminous sources of MeV-gammas.
In pilot experiments carried out at the PHELIX laser system, GSI Darmstadt, relativistic electrons were produced in a long scale plasma of near critical electron density (NCD) by the mechanism of the direct laser acceleration (DLA). Low density polymer foam layers preionised by a well-defined nanosecond laser pulse were used as NCD targets. The analysis of the measured electron spectra showed up to 10- fold increase of the electron "temperature" from T_Hot = 1–2 MeV, measured for the case of the interaction of 1–2 ×10^19 Wcm^(−2) ps-laser pulse with a planar foil, up to 14 MeV for the case when the relativistic laser pulse propagates through the by a ns-pulse preionised foam layer. In this case, up to 80–90 MeV electron energy was registered. An increase of the electron energy was accompanied by a strong increase of the number of relativistic electrons and well-defined directionality of the relativistic electron beam measured to be (12 ±1)° (FWHM). This directionality increases the gamma flux on target by far compared to the soft X-ray sources.
Additionally to laser based active diagnostics, passive techniques involving inherent X-ray fluorescence radiation of projectile and target emitted during heavy-ion target interaction can be used to measure the ion beam distribution on shot. This information is of great importance, since the target size is chosen to be smaller than the beam focus in order to ensure homogeneous heating of the HIHEX-target by the ion beam. High amounts of parasitic radiation and activation of experimental equipment is expected for experiments at the APPA-cave. For this reason, all electronic devices must be placed at a safe distance to the target chamber. In order to transport the signal over a large distance, the X-ray image of the target irradiated by heavy-ions has to be converted into an optical one.
For these purposes, the X-ray Conversion to Optical radiation and Transport (XCOT)-system was developed in the frame of a BMBF-project and commissioned in two beamtimes at the UNILAC, GSI during this work.
In experiments, we observed intense radiation of target atoms (K-shell transitions in Cu at 8–8.3 keV and L-shell transition in Ta) ionised in collisions with heavy ions as well as Doppler-shifted L-shell transitions of Au-projectiles passing through targets. This radiation can be used for monochromatic (dispersive elements like bent crystals) or polychromatic (pinhole) 2D X-ray mapping of the ion beam intensity distribution in the interaction region during the beam-target interaction. We measured the efficiency of the X-ray photon production depending on the target thickness and the number of ions passing through the target. The spatial resolution of the XCOT-system based on the multi-pinhole camera was measured to be (91±17) μm for the image magnification factor M = 2. It was considerably improved by application of a toroidally bent quartz crystal and reached 30 μm at M = 6. This resolution is optimal to image the distribution of a 1mm in diameter ion beam. As next step, the XCOT-system will be tested during the SIS18 beam-time at the HHT-experimental area.
Im Rahmen dieser Arbeit wurde ein Reaktionsmikroskop (REMI) nach dem Messprinzip COLTRIMS (Cold Target Recoil Ion Momentum Spectrometry) neu konstruiert und aufgebaut. Die Leistungsfähigkeit des Experimentaufbaus konnte sowohl in diversen Testreihen als auch anschließend unter realen Messbedingungen an der Synchrotronstrahlungsanlage SOLEIL und am endgültigen Bestimmungsort SQS-Instrument (Small Quantum Systems) des Freie-Elektronen-Lasers European XFEL (X-ray free-electron laser) eindrucksvoll unter Beweis gestellt werden.
Mit der Experimentiertechnik COLTRIMS ist es möglich, alle geladenen Fragmente einer Wechselwirkung eines Projektilteilchens mit einem Targetteilchen mittels zweier orts- und zeitauflösender Detektoren nachzuweisen. In einem Vakuumrezipienten wird die als Molekularstrahl präparierte Targetsubstanz inmitten der Hauptkammer zentral mit einem Projektilstrahl (z.B. des XFEL) zum Überlapp gebracht, sodass dort eine Wechselwirkung stattfinden kann. Bei den entstehenden Fragmenten handelt es sich um positiv geladene Ionen sowie negative geladene Elektronen. Elektrische Felder, erzeugt durch eine Spektrometer-Einheit, sowie durch Helmholtz-Spulen erzeugte magnetische Felder ermöglichen es, die geladenen Fragmente in Richtung der Detektoren zu lenken. Die Orts- und Zeitmessung eines einzelnen Teilchens (z.B. eines Ions) findet in Koinzidenz mit den anderen Teilchen (z.B. weiteren Ionen bzw. Elektronen) statt. Mit dieser Messmethode können die Impulsvektoren und Ladungszustände aller geladenen Fragmente in Koinzidenz gemessen werden. Da hierbei die geometrische Anordnung der einzelnen Komponenten für die Leistungsfähigkeit des Experiments eine entscheidende Rolle spielt, mussten bei der Neukonstruktion des COLTRIMS-Apparates für den Einsatz an einem Freie-Elektronen-Laser (FEL) einige Rahmenbedingungen erfüllt werden. Besonders wurden die hohen Vakuumvoraussetzungen an den Experimentaufbau aufgrund der enormen Lichtintensität eines FEL beachtet. Das Zusammenspiel der vielen Einzelkomponenten konnte zunächst in mehreren Testreihen überprüft werden. Unter anderem durch Variation der Vakuumbauteile in Material und Beschaffenheit konnten die zuvor ermittelten Vorgaben schließlich erreicht werden. Das neu konstruierte Target-Präparationssystem zur Erzeugung molekularer Gasstrahlen erlaubt nun den Einsatz von bis zu vier unterschiedlich dimensionierten, differentiell gepumpten Stufen. Zudem wurden hochpräzise Piezo-Aktuatoren verbaut, welche die Bewegung von Blenden im Vakuum erlauben, wodurch eine variable Einstellung des lokalen Targetdrucks ermöglicht wird. Die Anpassung der elektrischen Felder des Spektrometers für ein jeweiliges Experiment wurde mittels Simulationen der Teilchentrajektorien, Teilchenflugzeiten sowie der Detektorauflösung durchgeführt.
Da die in dieser Arbeit besprochenen Messungen und Ergebnisse die Wechselwirkungsprozesse von Röntgenstrahlung bzw. Synchrotronstrahlung mit Materie thematisieren, wird die Erzeugung von Synchrotronstrahlung sowohl in Kreisbeschleunigern als auch in den modernen Freie-Elektronen-Lasern (FEL) erklärt und hergeleitet. Der im Röntgenbereich arbeitende Freie-Elektronen-Laser European XFEL, welcher u.A. als Strahlungsquelle für die hier gezeigten Experimente diente, ist eine von derzeit noch wenigen Anlagen ihrer Art weltweit. Seine Lichtintensität in diesem Wellenlängenbereich liegt bis zu acht Größenordnungen über den bisher verwendeten Anlagen für Synchrotronstrahlung.
Beim ersten Einsatz der neuen Apparatur an der Synchrotronstrahlungsanlage SOLEIL wurde der ultraschnelle Dissoziationsprozess von Chlormethan (CH3Cl) untersucht. Während des Zerfallsprozesses nach Anregung durch Röntgenstrahlung werden hochenergetische Auger-Elektronen emittiert, welche in Koinzidenz mit verschiedenen Molekülfragmenten nachgewiesen wurden. Durch den Zerfallsmechanismus der ultraschnellen Dissoziation wird die Auger-Elektronenemission nach resonanter Molekülanregung während der Dissoziation des Moleküls beschrieben. Die kinetische Energie des Auger-Elektrons ist dabei abhängig von seinem Emissionszeitpunkt. Somit können die gemessenen Auger-Elektronen ein „Standbild“ der zeitlichen Abfolge des Dissoziationsprozesses liefern.
Es wird eine detaillierte Beschreibung der Datenanalyse vorgenommen, welche aus Kalibrationsmessungen und einer Interpretation der Messdaten besteht. Die abschließende Betrachtung besteht in der Darstellung der Elektronenemissionswinkelverteilungen im molekülfesten Koordinatensystem. Die Winkelverteilung der Auger-Elektronen wird am Anfang der Dissoziation vom umgebenden Molekül- potential beeinflusst und zeigt deutliche Strukturen entlang der Bindungsachse. Entfernen sich die Bindungspartner voneinander und das Auger-Elektron wird währenddessen emittiert, so verschwinden diese Strukturen zunehmend und eine Vorzugsemissionsrichtung senkrecht zur Molekülachse wird sichtbar.
Die Analyse der Messdaten zur Untersuchung von Multiphotonen-Ionisation an Sauerstoff-Molekülen am Freie-Elektronen-Laser European XFEL ermöglichte unter anderem die Beobachtung „hohler Moleküle“, also Systemen mit Doppelinnerschalen- Vakanzen. Solche Zustände können vor allem durch die sequentielle Absorption zweier Photonen entstehen, wobei die hierbei nötige Photonendichte nur von FEL- Anlagen bereit gestellt werden kann. Hier konnte das Ziel erreicht werden, erstmalig die Emissionswinkelverteilungen der Photoelektronen von mehrfach ionisierten Sauerstoff-Molekülen (O+/O3+-Aufbruchskanal) als Folge der ablaufenden Mechanismen femtosekundengenau zu beobachten. Hierzu wurde ein vereinfachtes Schema der verschiedenen Zerfallsschritte erstellt und schließlich ermittelt, dass der Zerfall durch eine PAPA-Sequenz beschrieben werden kann. Bei dieser handelt es sich um die zweimalige Abfolge von Photoionisation und Auger-Zerfall. Somit werden vier positive Ladungen im Molekül erzeugt. Das zweite Photon des XFEL wird dabei während der Dissoziation der sich Coulomb-abstoßenden Fragmente absorbiert, weshalb es sich um einen zweistufigen Prozess aus Anrege- und Abfrage- Schritt (Pump-Probe) handelt. Schlussendlich gelang zudem der Nachweis von Doppelinnerschalen-Vakanzen im Sauerstoff-Molekül nach Selektion des O2+/O2+- Aufbruchkanals. Hierfür konnten die beiden Möglichkeiten einer zweiseitigen oder einseitigen Doppelinnerschalen-Vakanz getrennt betrachtet werden und ebenfalls erstmalig das Verhalten der Elektronenemission dieser beiden Zustände verglichen werden.
In this thesis different descriptions for the non-Abelian Landau-Pomeranchuk-Migdal (LPM) effect are studied within the partonic transport approach BAMPS (Boltzmann Approach to Multi-Parton Scatterings), which numerically solves the 3+1-dimensional Boltzmann equation for massless partons based on elastic and radiative interactions calculated in perturbative quantum chromodynamics.
The LPM effect is a coherence effect originating from the finite formation time of gluon emissions leading to characteristic dependencies of the radiative energy loss of energetic partonic projectiles, as e.g. jets in ultra-relativistic heavy-ion collisions.
Due to this non-locality of interactions, such coherence effects are difficult to describe rigorously in transport theory.
Therefore we compare in this work three different implementations for the LPM effect: i) a parametric LPM suppression based on a theta function in the radiative matrix elements, ii) a stochastic LPM approach, which explicitly simulates the elastic interactions of gluons during their formation time, and iii) the thermal gluon emission rate from the AMY formalism, which is a hard-thermal-loop calculation exactly considering the non-Abelian LPM effect by resumming ladder diagrams in the large medium limit.
After discussing the numerical implementation of the three approaches, we investigate their consequences in different jet-energy loss scenarios: first the academic scenarios of eikonal and non-eikonal jets flying through a static brick of thermal quark-gluon plasma and then jets traversing the expanding medium of ultra-relativistic heavy-ion collisions at LHC energies.
We can demonstrate that although the different LPM approaches show similarities in the radiative energy loss there are differences in the underlying gluon emission spectra, which originate from the specific treatment of divergences in the matrix elements within BAMPS.
Furthermore, based on the different LPM approaches we present simulation results for recent jet quenching observables from the LHC experiments and discuss properties of the underlying heavy-ion medium.
This doctoral thesis is concerned with the development of a method that allows to measure in vivo and non-invasively the mid-infrared absorption spectra of human epidermis, using photoacoustic spectroscopy. The main focus is the monitoring of the glucose level in epidermal interstitial fluid and its correlation with the blood glucose level; which is the most important parameter for the diagnosis and treatment of diabetes mellitus. Most publications in this field have only reported measurements in vitro for the absorption spectra of epidermis in the mid-infrared range. Using the approach presented in this work, it was possible to record in vivo and in situ the absorption spectra of skin of volunteers; and with these spectra, the changing glucose concentration could be monitored. The novelty of the photoacoustic method introduced here is that it operates in acoustic resonance in the ultrasound range. This considerably reduces the signal noise due to the external acoustic background. Although the photoacoustic method reported in this work was used to measure glucose in human epidermis, it can also be applied to other solid samples with relevant absorption bands in the mid-infrared. Furthermore, it can be used in other spectral regions if the laser source covers relevant absorption bands of the sample.
Mit der COLTRIMS-Technik können immer kompliziertere Reaktionen untersucht werden, dabei steigt aber die Zahl der zu detektierenden Reaktionsfragmente. Der Nachweis von Ionen ist üblicherweise gut möglich, da die entsprechenden Flugzeiten groß sind im Vergleich zur Totzeit der benutzten Detektoren. Elektronen hingegen sind sehr leicht und erreichen den Detektor innerhalb von wenigen 10 ns. Aktuelle Detektoren erlauben aber nur den Nachweis weniger Elektronen und es werden somit neue Detektoren benötigt, um alle Teilchen nachzuweisen. Ziel dieser Arbeit war es also, einen Detektor zu entwickeln, der dies erreicht.
Zu Beginn dieser Monografie wird die COLTRIMS-Technik vorgestellt. Die Experimente mit dieser Messmethode finden hauptsächlich mit einer Laufzeitanode statt. Diese stößt aber bei dem Nachweis von mehreren Teilchen an ihre Grenzen und manche Experimente können nur unvollständig analysiert werden.
Damit ein neuer Detektor entwickelt werden kann, muss erst verstanden werden, wie die zu detektierenden Teilchen/Signale entstehen und wie ihre Eigenschaften sind. Aus diesem Grund wird das Sekundärteilchen-erzeugende MCP ausführlich vorgestellt.
Weiterhin gibt diese Arbeit einen umfassenden Überblick über bereits realisierte Anoden. Verschiedene Repräsentanten der fünf Anodenarten (Flächen-, Streifen-/Pixel-, Laufzeit-, Kamera-, sowie Halbleiter-Anode) werden vorgestellt und bewertet.
Mit diesem Wissen konnten drei Ansätze für neue Anoden entwickelt, designt, produziert, getestet und bewertet werden. Alle neu entwickelten Anoden benutzen Leiterplatinen als Basis und werden in derselben Vakuumkammer getestet. Auch wenn die Detektionsprinzipien der drei getesteten Detektoren unterschiedlich sind, so verläuft die Auskopplung, Verarbeitung und Digitalisierung der Signale nach dem gleichen Schema. Außerdem wurden im Rahmen dieser Arbeit diverse Algorithmen entwickelt und programmiert, mit deren Hilfe die Signalauswertung und Positionsbestimmung erfolgt.
Das dritte Kapitel beschreibt die neu entwickelte Draht-Harfen-Anode. Dieser Detektor besteht aus vielen kurzen Drähten die parallel auf Rahmen aus Leiterplatinen gespannt werden. Aus dieser Anode ließ sich im Rahmen dieser Arbeit aber kein funktionsfähiger Detektor entwickeln und es wird empfohlen, diesen Ansatz nicht weiterzuverfolgen.
Im Kapitel über die Pixel-Anode mit Streifenauslese wird ein Ansatz vorgestellt, bei dem die Elektronenwolke von einem Muster aus leitenden Rauten absorbiert wird. Es wurde ein funktionsfähiger Detektor mit MAMA-Verschaltung realisiert. Die aktive Fläche ist mit einem Durchmesser von 50 mm aber zu klein. Eine große Variante der Anode ist in der realisierten Form aber nicht als Detektor geeignet.
Als dritter neuer Detektor wird die Streifen-Laufzeit-Anode beschrieben. Diese besteht aus einem rechteckigen Muster von Pixeln, die in einer Richtung über eine Zeitverzögerung ausgelesen werden. Dieser Ansatz ist sehr vielversprechend und es ließen sich nicht nur einzelne Teilchen nachweisen, sondern auch beim Aufbruch eines D2+-Moleküls konnten beide Fragmente gemessen werden.
Das letzte Kapitel befasst sich mit weiteren Konzepten, die als Detektor realisiert werden könnten.
This thesis discusses important questions of the beam dynamics in the proton-lead operation in the Large Hadron Collider (LHC) at CERN in Geneva. In two time blocks of several weeks in the years 2013 and 2016, proton-lead collisions have so far been successfully generated in the LHC and used by the experiments at the LHC. One reason for doubts regarding the successful operation in proton-lead configuration was the fact that the beams have to be accelerated with different revolution frequencies. There is long-range repulsion between the beams, since both beams share the beam chamber around the interaction points. Because of the different revolution frequencies, the positions of the interaction between the beams shift each revolution. This can lead to resonant excitation and to an increase in the transverse beam emittance, as was observed in the Relativistic Heavy-Ion Collider (RHIC). In this thesis, simulations for the LHC, RHIC and the High-Luminosity Large Hadron Collider (HL-LHC) are performed with a new model. The results for RHIC show relative growth rates of the emittances of the gold beam in gold-deuteron operation in RHIC from 0.1 %/s to 1.5 %/s. Growth rates of this magnitude were observed experimentally in RHIC. Simulations for the LHC show no significant increase of the emittance of the lead beam for different intensities of the counter-rotating beam. The simulation results confirm the measured stability of the beams in the LHC and the issue of strongly increasing emittances in RHIC is reproduced. Also, no significant increase of the emittance is predicted for the Future Circular Collider (FCC) and the HL-LHC.
Using a frequency-map analysis, this work verifies whether the interaction of the lead beam with the much smaller proton beam in the proton-lead operation of the LHC leads to diffusion within the lead beam. Experiences at HERA at DESY in Hamburg and at SppS at CERN have shown that the lifetime of the larger beam can rapidly decrease under certain circumstances. The results of the simulation show no chaotic dynamics near the beam centre of the lead beam. This result is supported by experimental observation.
A program code has been developed which calculates the beam evolution in the LHC by means of coupled differential equations. This study shows that the growth rates of the lead beam due to intra-beam scattering is overestimated and that particle bunches of the lead beam lose more intensity than assumed in the model. The analysis also shows that bunches colliding in a detector suffer additional losses that increase with decreasing crossing angle at the interaction point.
In this work, 2016 data from beam-loss monitors in combination with the luminosity and the loss rate of the beam intensity are used to determine the cross section of proton-lead collisions at the center-of-mass energy of 8.16 TeV. Beam-loss monitors that mainly detect beam losses that are not caused by the collision process itself are used to determine the total cross section via regression. An analysis of the data recorded in 2016 at the center-of-mass energy of 8.16 TeV resulted in a total cross section of σ=(2.32±0.01(stat.)±0.20(sys.)) b. This corresponds approximately to a hadronic cross section of σ(had)=(2.24±0.01(stat.)±0.21(sys.)) b. This value deviates only by 5.7 % from the theoretical value σ(had)=(2.12±0.01) b.
The simulation code for determining the beam evolution is also used to estimate the integrated luminosity of a future one-month run with proton-lead collisions. The result of the study shows that in the future the luminosity in the ATLAS and CMS experiments will increase from 15/nb per day in 2016 to 30/nb per day, which is a significant increase in terms of the performance. This operation, however, requires the use of the TCL collimators to protect the dispersion suppressors at ATLAS and CMS from collision fragments.
This work also gives an outlook on the expected luminosity production in proton-nucleus operation using ion species lighter than lead ions. For example, a change from proton-lead to proton-argon collisions would increase the integrated luminosity from monthly 0.8/nb to 9.4/nb in ATLAS and CMS. This is an increase of one order of magnitude and approximately a doubling of the integrated nucleon-nucleon luminosity. There may be a test operation with proton-oxygen collisions in 2023, which will last only a few days and will be operated with a low luminosity. The LHCf experiment (LHCb experiment) would achieve the desired integrated luminosity of 1.5/nb (2/nb) within 70h (35h) beam time.
Chiralität ist in der belebten Natur ein omnipräsentes Phänomen und beschreibt die Symmetrieeigenschaft eines Objektes, dass dieses von seinem Spiegelbild unterscheidbar ist. Die bisherigen Untersuchungen der Wechselwirkung zwischen chiralen Molekülen und Licht fokussieren sich auf das Regime der Ein- und Multiphoton-Ionisation und wird mit dieser Arbeit um Untersuchungen im Starkfeldregime erweitert. Im Rahmen dieser Arbeit wurden Experimente an einzelnen chiralen Molekülen in starken Laserfeldern vorbereitet, durchgeführt, analysiert und alle geladenen Fragmente in Koinzidenz untersucht.
Die Präsentation der Ergebnisse orientierte sich an der Reihenfolge, in der auch die Datenauswertung von Vielteilchenaufbrüchen vonstattengeht: Zunächst wurde der Dichroismus in den Photoionen (PICD) auf chirale Signale in integraler differentieller Form untersucht, dann wurde die Asymmetrien in den Elektronenverteilungen vorgestellt und abschließend die Zusammenhänge zwischen den Ionen- und Elektronenverteilungen aufgezeigt.
Kapitel 6 untersuchte die (differentielle) Ionisations- und Fragmentationswahrscheinlichkeit von verschiedenen chiralen Molekülen. Die in Kapitel 6.1 präsentierten Daten verknüpften erstmals den bereits in der Literatur diskutierten Zirkulardichroismus in den Zählraten von Photoionen (PICD) mit dem signalstärkeren differentiellen PICD in der Einfachionisation von Methyloxiran. Dissoziiert das Molekül nach der Ionisation rasch genug, gewährt der Impulsvektor des geladenen Fragments Zugang zu einer Fragmentationsachse. Durch die Auflösung nach einer Molekülachse ist der beobachtete PICD fast eine Größenordnung stärker, als der über alle Raumrichtungen integrierte.
In steigender Komplexität wurde in Kapitel 6.2 eine Fragmentation in vier Teilchen von Molekülen aus einem racemischen Gemisch von CHBrClF untersucht. Über die Auswertung eines Spatproduktes aus den Impulsvektoren konnte für jedes Molekül dessen Händigkeit bestimmt und der vollständig differentielle PICD untersucht werden. Durch das Festhalten einer Fragmentationsachse (analog zu Kapitel 6.1) konnten um einen Faktor vier stärkere PICD-Signale und durch das Auflösen nach der vollständigen Molekülorientierung die Signalstärke des PICD um einen Faktor von etwa 16 in den Bereich einiger Prozente gebracht werden. Leider übersteigt die theoretische Beschreibung dieses Prozesses den aktuellen Stand der Forschung weit. Daher kann nicht ausgeschlossen werden, dass nicht ein Beitrag zur PICD-Signalverstärkung auch aus der Dynamik der sequentiellen vielfachen Ionisation stammt.
Die untersuchte Reaktion in Kapitel 6.3 war der Fünf-Teilchenaufbruch der achiralen Ameisensäure. In der Messung aller ionischen Fragmente konnten analog zu dem vorherigen Kapitel die internen Koordinaten sowie die Orientierung des Moleküls ermittelt werden. Tatsächlich wurde von einer chiralen Fragmentation der achiralen Ameisensäure berichtet. Welches Enantiomer in der Fragmentation beobachtet wird, hängt maßgeblich von der Molekülorientierung relativ zum ionisierenden Laserpuls ab. Diese Erkenntnis könnte zu neuen Ansätzen für Laserkatalysierte enantioselektive Reaktionen führen. Darüber hinaus konnte gezeigt werden, dass die beobachtete Händigkeit des Moleküls nicht nur von seiner Orientierung, sondern auch von der Helizität des ionisierenden Laserpulses abhängt. Dieser differentielle PICD an der Ameisensäure zeigte sich neben einer sehr großen Signalstärke von über 20 % auch als sensitive Probe für die molekulare Struktur.
In Kapitel 7 wurden die Untersuchungen an den 3-dimensionalen Impulsverteilungen der Photoelektronen vorgestellt. Zunächst wird hierzu auf die allgemeine Form des Dichroismus in den Photoelektronen (PECD) im Starkfeldregime eingegangen und die vorherrschenden Symmetrien des Ionisationsregimes herausgearbeitet (Kapitel 7.1). Mit leicht steigender Komplexität konnte eine klare Verbindung zwischen der Asymmetrie in der Elektronenverteilung und dem Schicksal des zurückbleibenden molekularen Ions anhand der Einfachionisation von Methyloxiran herausgearbeitet werden (Kapitel 7.2). Dies hat eine wichtige Auswirkung auf die Nutzbarkeit des PECD im Starkfeldregime als Analysemethode für Chemie und Pharmazie: Der über alle Fragmentationskanäle integrierte PECD ist sensitiv auf die Gewichtung der Fragmente und damit auch auf beispielsweise die maximale Laserintensität. Die Daten legen nahe, dass die Abhängigkeit des PECD von dem Fragmentationskanal auf die unterschiedliche Auswahl von Subensembles molekularer Orientierungen zurückzuführen ist.
Bei Verwendung von elliptisch polarisiertem Licht treten gegenüber der zirkularen Polarisation eine Reihe neuer Effekte auf (Kapitel 7.3). Zunächst zeigt der PECD auch im Starkfeldregime eine nicht lineare Sensitivität auf den Polarisationszustand, welche sich auch als Funktion des Elektronentransversalimpulses und dem Fragmentationskanal ändert. Somit ist die Verwendung von elliptisch polarisiertem Licht bestens für die chirale Erkennung geeignet, wie inzwischen auch in der Literatur bestätigt wurde. Darüber hinaus führt die gebrochene Rotationssymmetrie bei elliptisch polarisiertem Licht zu einer Elektronenimpulsverteilung, welche selbst chiral ist: Der PECD variiert je nach Winkel φ in der Polarisationsebene, wobei die Extrema des PECD nicht mit den Maxima der Zählraten übereinstimmen. Als neue chirale Beobachtungsgröße konnten wir eine enantiosensitive und vorwärts-/rückwärtsasymmetrische Rotation der Zählratenmaxima einführen. Als abgeleitete Größe aus derselben drei-dimensionalen Elektronenverteilung ist diese Beobachtungsgröße jedoch untrennbar verknüpft mit dem ϕ-abhängigen PECD.
Kapitel 8 verknüpfte das (partielle) Wissen um die molekulare Orientierung und den PICD mit den Asymmetrien der Elektronenverteilung für die Messung der fünffach-Ionisation von Ameisensäure (Kapitel 8.1), der vierfach-Ionisation von CHBrClF (Kapitel 8.2) und der Einfachionisation von Methyloxiran (Kapitel 8.3). Im Datensatz der Ameisensäure und dem des CHBrClF zeigte die molekulare Orientierung einen größeren Einfluss auf die Asymmetrie in der Elektronenverteilung als das Enantiomer oder die Helizität des Lichtes. Diese Verknüpfung zwischen Molekülorientierung und Elektronenasymmetrie überträgt die Asymmetrien des PICD auf die Elektronenverteilung. Die Messung an Methyloxiran relativiert diesen Zusammenhang jedoch in dem dieser in dieser Stärke nur bei manchen Fragmentationskanälen auftritt. Offenbar ist die Übertragung der Asymmetrie der differentiellen Ionisationswahrscheinlichkeit nur einer der Mechanismen, welcher zu Elektronasymmetrien im Starkfeldregime führt.
To gain a better understanding of complex mechanisms in biological systems, simultaneous control over multiple processes is key. To this purpose selective photouncaging has been developed. Photo-uncaging is an experimental scheme in which a molecule of interest has been inactivated synthetically and is activated by light. Usually a bond is cleaved and a leaving group is set free. The molecule which inactivates the molecule of interest and sets the leaving group free is called (photo-)cage. In a selective photo-uncaging scheme a number of leaving groups can be released independently, usually by irradiation with light of different wavelengths. This approach is, however, seriously limited in its applicability due to the properties of the involved cages and irradiation schemes. A major drawback is the usually quite broad UV-Vis absorption of the cages. This makes a selective activation by light difficult and limits the maximal number of independent cages severely.
Therefore, the aim of this thesis is to introduce the Vibrationally Promoted Electronic Resonance (VIPER) 2D-IR pulse sequence in a alternative selective uncaging scheme.
The VIPER 2D-IR pulse sequence is a spectroscopic tool which allows to generate 2D-IR signals whose lifetime are independent of the vibrational relaxation lifetime. It has been first used to monitor chemical exchange. It consists of a narrowband infared pump pulse, a subsequent UV-Vis pump pulse and a broadband infrared probe pulse. The UV-Vis pump pulse is off-resonant with regard to the UV-Vis absorption band. Electronic excitation becomes only possible, if the infrared pump pulse modulates the UV-Vis transition of the IR-excited molecule. This modulation brings the UV-Vis transition in resonance with the UV-Vis pump pulse. Thereby, only the molecules which were pre-excited with the infrared pulse can be excited into the electronically excited state. A computational prediction of the modulation was carried out by Jan von Cosel in the Burghardt group.
The narrowband infrared pump pulse can be used to selectively excite a subensemble of molecules in a mixture into an electronically excited state even if the UV-Vis spectra of all molecules are virtually identical. For this the sub-ensemble needs to exhibit an identifiable infrared spectrum. Combined with the introduction of isotope labels, which lead to changes in the infrared absorption spectra, the larger selectivity in the infrared region can be exploited for an alternative selective uncaging approach. In VIPER uncaging the infrared pump pulse selects the species and the subsequent UV-Vis pulse provides the energy needed for electronic excitation upon which the photo cleavage can occur.
After an introduction of the principle idea of uncaging and VIPER spectroscopy, the concept of VIPER uncaging is introduced and its limits and requirements are discussed. Some examples for possible VIPER cages are reviewed.
A coumarin molecule (7-diethylamino coumarin) which can release an azide group was chosen as a first test molecule for VIPER uncaging. Its isotopomers were characterized to determine suitable spectroscopic markers for successful uncaging and to find fitting experimental conditions. The chosen coumarin cage has an UV-Vis absorption band at approximately 380 nm and a steep flank on the high wavelength side of the band. The quantum yield for the azide compound is between 10-20 % depending on the solvent’s water content. The release was found to be on a picosecond timescale which is among the fastest known photo reactions, but the photo reaction mechanism has proven to be not straightforward. For the VIPER experiment on the mixture two isotopomers were chosen with a 13C atom at different positions. In one species a ring mode of the coumarin is changed by the 13C atom. In the other isotopomer the carbonyl stretching mode is influenced. The change in the ring mode region allows to select one species or the other with the infrared pre-excitation. Because of experimental difficulties only isotopomers with the same leaving group could be used. The successful selective electronic excitation of the individual isotopomers in a mixture was monitored by probing the carbonyl region.
As a second VIPER cage, para-hydroxyphenacyl (pHP) was chosen. A thiocyanate group was selected as leaving group. pHP cages have their electronic transition in the UV, with a maximum absorption at 290 nm. The shape of the spectrum is suitable and the quantum yield is very high, with values in the literature of up to 90 %. Also the photo reaction is well studied and the expected byproducts are well characterized. The chosen isotopologues were characterized spectroscopically. The resulting data on the photo reaction were in agreement with the mechanism proposed in the literature. The mixture for the VIPER experiment consisted of two isotopologues, where for one species all the C atoms in the ring were labelled and for the other the C-atom in the thiocyanate leaving group was labelled. Here the release of the different leaving groups, labelled and unlabelled thiocyanate, could be monitored selectively. This shows that it is possible to selectively release a molecule in a mixture of caged molecules by applying the VIPER pulse sequence.
The samples were synthesized by Matiss Reinfelds from the Heckel group and the VIPER experiments were done together with Carsten Neumann and with support
of the Bredenbeck group.
The leaving groups were chosen because of their infrared absorption which allowed to directly monitor the successful cleavage by spectroscopy. This was needed for the proof-of-concept experiment and to allow direct optimization of the experimental parameters but is not necessarily a requirement for VIPER uncaging.
Concerning the selectivity of the VIPER uncaging, the approach is at the moment mainly limited by the infrared pulse energy. The selective VIPER excitation is competing with unselective excitation directly by just the UV-Vis pulse. A more intense infrared pump pulse would increase only the selective VIPER excitation and thereby improve the contrast to the unspecific background.
To address this issue, the first steps towards an alternative infrared light generation are undertaken. In this alternative approach the infrared light for preexcitation is directly generated by difference frequency generation of the laser output, i.e. the high energy 800 nm fundamental, and the output of a non-collinear optical parametric amplifier (NOPA). To achieve a narrowband pump pulse the pulses are chirped before mixing. In the scope of this thesis a NOPA has been installed and the mixing has been tested with available test crystal medium. While infrared wavelength region and power were not in the aspired range with this alternative crystal the feasibility of mixing between a NOPA output and the fundamental could be shown.
Other possibilities to increase the contrast to the unspecific background excitation by the UV-Vis pump pulse are discussed. For most applications of selective VIPER uncaging the detection by fs-laser spectroscopy will not be needed and could be replaced by other methods e.g. chromatography. This will allow the experimental parameters of the VIPER pulse sequence to be changed in a way which reduces unspecific excitation i.e. reducing the UV-Vis-pump energy and result in much better contrast.
In conclusion, the experimental data in this thesis shows the VIPER pulse sequence to be applicable to selective uncaging schemes and indicates measures to arrive at the specificity necessary for uncaging applications. This thesis was focused on uncaging photo reactions with isotopomers and isotopologues, but other types of photo reactions could in principle be controlled in the same way. It should be possible to address different isomers in mixtures or different ground states of proteins selectively. The discussed experiments are a significant step towards control over photo reactions in mixtures.
Cortical circuits exhibit highly dynamic and complex neural activity. Intriguingly, cortical activity exhibits consistently two key features across observed species and brain areas. First, individual neurons tend to be co-active in spatially localized domains forming orderly arranged, modular layouts with a typical spatial scale. Second, cortical elements are correlated in their activity over large distances reflecting long-range network interactions distributed over several millimeters. Currently, it is unclear how these two fundamental properties emerge in the early developing cortical activity.
Here, I aim to fill this gap by combining analyses of chronic imaging data and network models of developing cortical activity. Neural recordings of spontaneous and visually evoked activity in primary visual cortex of ferrets during their early cortical development were obtained using in vivo 2-photon and widefield epi-fluorescence calcium imaging. Spontaneous activity was used to probe the early state of cortical networks as its spatiotemporal organization is independent of a stimulus-imposed structure, and it is already present early in cortical development prior to reliably evoked responses. To assess the mature functional organization of distributed networks in cortex, the tuning of neural responses to stimulus features, in particular to the orientation of an edge-like stimulus, was assessed. Cortical responses to moving gratings of varying orientations form an orderly arranged layout of orientation domains extending over several millimeters.
To begin with, I showed that spontaneous activity correlations extend over several millimeters, supporting the assumption of using spontaneous activity to assess distributed networks in cortex.
Next, I asked how distributed networks in the mature visual cortex - assessed by spontaneous activity correlations - are related to its fine-scale functional organization. I found that the spatially extended and modular spontaneous correlation patterns accurately predict the fine spatial structure of visually evoked orientation domains several millimeters away. These results suggest a close relation between spontaneous correlations and visually evoked responses on a fine spatial scale and across large spatial distances.
As the principles governing the functional organization and development of distributed network interactions in the neocortex remain poorly understood, I next asked how long range correlated activity arises early in development. I found that key features of mature spontaneous activity introduced in this work, including long-range spontaneous correlations, were present already early in cortical development prior to the maturation of long-range, horizontal connections, and the predicted mature orientation preference layout. Even after silencing feed-forward input drive by inactivating retina or thalamus, long-range correlated and modular activity robustly emerged in early cortex. These results suggest that local recurrent connections in early cortical circuits can generate structured long-range network correlations that guide the formation of visually-evoked distributed functional networks.
To investigate how these large-scale cortical networks emerge prior to the maturation and elaboration of long-range horizontal connectivity, I examined a statistical network model describing an ensemble of spatially extended spontaneous activity patterns. I found a direct relationship between the dimensionality of this ensemble of activity patterns and the decay of its correlation structure. Specifically, reducing the dimensionality of the ensemble leads to an increase in the spatial range of the correlation structure.
To test whether this mechanism could generate a long-range correlation structure in cortical circuits, I studied a dynamical network model implementing a dimensionality reduction mechanism. Based on previous work demonstrating that network heterogeneity reduces the dimensionality of activity patterns, I showed that by increasing the degree of heterogeneity in the network, the dimensionality of the ensemble of activity patterns decreases and in turn their correlations extend over a greater range. A comparison to experimental data revealed a quantitative match between the network model and the observations in vivo in several of the key features of the early cortex including the spatial scale of correlations. Low dimensionality of spontaneous activity thus might provide an organizational principle explaining the observed long-range correlation structure in the early cortex.
Finally, I asked whether a network with a biologically plausible architecture can generate modular activity. Several classical models showed that modular activity patterns can emerge via an intracortical mechanism involving lateral inhibition. However, this assumption appears to be in conflict with current experimental evidence. Moreover, these network models were not experimentally tested, so far. Here, I showed by using linear stability analysis that spatially localized self-inhibition relaxes the constraints on the connectivity structure in a network model, such that biologically more plausible network motifs with shorter ranging inhibition than excitation can robustly generate modular activity.
Importantly, I also provided several model predictions to make the class of network models experimentally testable in view of recent technological advancements in imaging and manipulation of cortical circuits. A critical prediction of the model is the decrease in spacing of active domains when the total amount of inhibition increases. These results provide a novel mechanism of how cortical circuits with short-range inhibition can form modular activity.
Taken together, this thesis provides evidence that the two described fundamental features of neural activity are already present in the early cortex and shows that activity with those features can be generated in network models with an architecture consistent with the early cortex using basic principles.
In this work a nonlinear evolution of pure states of a finite dimensional quantum system is introduced, in particular a Riccati evolution equation.
It is shown how this class of dynamics is actually a Hamiltonian dynamics in the complex projective space.
In this projective space it is shown that there is a nonlinear superposition rule, consistent with its linear counterpart in the Hilbert space. As an example, the developed nonlinear formalism is applied to the semiclassical Jaynes–Cummings model.
Later, it is shown that there is an inherent nonlinear evolution in the dynamics of the so-called generalized coherent states.
To show this, the fact that in quantum mechanics it is possible to immerse a ''classical'' manifold into the Hilbert space is employed, such that one may parametrize the time-dependence of the wave function through the variation of parameters in the classical manifold.
The immersion allows to consider the so-called principle of analogy, i.e. using the procedures and structures available from the classical setting to employ them in the quantum setting.
Finally, it is introduced the contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and it is showed that it is a natural candidate for a geometric description of non-dissipative and dissipative systems.
The last decades have brought tremendous progress in understanding the phase structure of the strongly interacting matter. This has been driven by studying heavy-ion collisions on the experimental side and Lattice QCD, functional approaches to QCD, perturbation theory and effective theories on the theoretical side. Of particular interest is the transition from hadrons to partonic degrees of freedom which is expected to occur at high temperatures or high baryon densities. These phases play an important role in the early universe and the core of neutron stars. Nowadays, the existence of a deconfined phase, i.e. Quark Gluon Plasma (QGP) and its phase transition at vanishing and small net-baryon densities, are well established. However, the situation at larger densities is less clear.
Complementary to the studies of matter at high temperatures and low net-baryon densities performed at RHIC and LHC, the proposed Compressed Baryonic Matter (CBM) experiment at the future FAIR facility, aims to explore the QCD phase diagram at very high baryon-net densities and moderate temperatures. The CBM research program includes the search for the deconfinement phase transition, the study of chiral symmetry restoration in super dense baryonic matter, the search for the critical endpoint, and the study of the nuclear equation of state at high densities. While other experiments (STAR-BES at BNL, BM@N at NICA) are suited to measure bulk observables, CBM is explicitly designed to access rare observables, such as multi-strange hadrons, dileptons, hypernuclei and charmonium. Therefore, a key feature of CBM is the very high interaction rate, exceeding those of contemporary and proposed nuclear collision experiments by several orders of magnitude. However, some of the rare probes have a complex signature, hidden in a background of several hundreds of charged tracks. This forbids a conventional, hardware-triggered readout; instead, the experiment combines self-triggered front-end electronics, fast and free-streaming data transport, online event reconstruction and online event selection.
The central detector for tracking and momentum determination of charged particles in the CBM experiment is the Silicon Tracking System (STS). It is designed to measure up to 700 charged particles in nucleus-nucleus collisions between 0.1 and 10 MHz interaction rate, to achieve a momentum resolution in 1 Tm dipole magnetic field better than 2%, and to be capable of identifying complex particle decays topologies, e.g., such with strangeness content. The STS comprises 8 tracking stations equipped with double-sided silicon microstrip sensors. Two million channels are read out with self-triggering electronics, matching the data streaming and on-line event analysis concept applied throughout the experiment. The detector’s functional building block consists of a silicon sensor, aluminum-kapton microcables and two front-end electronics boards integrated in a module. The custom-designed ASIC (STS-XYTER) implements the analog front-end, the digitizer and the generation of individual hit data for each signal.
Design of the front-end chip requires finding an optimal solution for time and input charge measurements with tight constraints: small area (58 μm channel pitch), low noise levels (below 1500 ENC(e− )), low power consumption (610 mW/channel), radiation hard architecture and speed requirements. Being a part of the first processing stage in the full readout and data acquisition chain, the characterization of the chip and its integration with the detector components is a crucial task. In this work, various methods and tools are established for testing and qualifying the ASIC analog front-end. A procedure for amplitude and timing calibration is developed using different functionalities of the chip. The procedure is optimized for our prototype system in order to achieve the best accuracy in the shortest amount of time. Results were verified using a gamma source and an external pulse generator, showing discrepancies below 5%.
Among the multiple operation requirements of the ASIC, the noise performance is of essential importance. The characterization of the chip noise is carried out as a function of a large number of parameters such as: low-voltage power regulators, input capacitance, shaping time, temperature and bond’s protective glue (glob-top). These studies allowed to optimize the ASIC configuration settings, to identify possible malfunctions in the low voltage powering scheme and to select possible glob-top materials to be used in the module assembly. Moreover, important differences are found among odd and even channels, which main cause was related to the bias scheme of the amplifiers of the two groups of channels. This effect has been corrected in the new version (v2.1) of the ASIC.
Despite the STS front-end electronics being located outside of the physics acceptance, they will be exposed to high fluxes of charged particles. Considering the SIS100 possible running scenario, the lifetime dose at the location of the electronics is expected not to exceed 800 krad. Consequently, the STS-XYTERv2 ASIC implements a radiation hard design based on dual-interlocked cells (DICE), and triple modular redundancy (TMR).
Multiple dedicated beam campaigns were carried out to evaluate the ASIC’s design in terms of immunity to single event upsets (SEU) errors and overall performance after a lifetime doses. The DICE cell SEU cross section was measured in a high-intensity proton beam. Result show a significant improvement of the SEU immunity in the STS-XYTERv2 compared to its predecessor, and allows to estimate the upset rate in the CBM running scenario, resulting in less than one SEU/ASIC/day.
The studies on the total ionizing dose (TID) show that the overall noise levels for the ASIC, at the end of the experiment lifetime, are expected to increase by approximately 40 – 60%. Moreover, they demonstrated that short periods of annealing at room temperature can favorably influence the noise performance of the chip.
The assembly and test of the STS modules, a complex process with multiple stages and a long learning curve, is illustrated in different parts of this work. The first prototype modules were built with the front-end board type B (FEBs-B), capable of reading out 128 channels for p and n side respectively. The studies were conducted with a relativistic proton beam of 1.7 GeV/c momentum at the COSY accelerator facility, Research Center Juelich, in March 2018. The campaign brought valuable insights to the development of an effective grounding and powering scheme for reading out the detectors. The signal-to-noise was measured for one of the prototype modules, resulting in values larger than 15 for both polarities. A deeper analysis into the collected data allowed the identification of a logic error in the ASIC that affected the readout rate and the quality of the data. This issue was corrected in the new version of the chip.
A precursor of the STS detector, named mini-STS (mSTS), has been built within the mCBM project carried out in FAIR Phase0. mSTS was built from 4 fully assembled detector modules. To ensure the proper operation of the ASICs that were used in the module assembly, it was required to develop a rigorous quality assurance procedure. A dedicated setup was built based on a custom designed pogo-pin station and a total of 339 chips were tested. More than 90% of good-quality and operational ASICs were obtained. In the mCBM beam campaign of March 2019, four detector modules were successfully operated in a close-to-final readout chain and valuable data were collected. The mSTS detector was exposed to the products of Ag+Au collisions at energies above 1.58 AGeV and overall interaction rates up to 106 , which resembles the real conditions of the CBM experiment.
Along this work, significant progress for the development of the STS detector modules was achieved. Techniques for characterization of the front-end electronics and the complete detector system were developed and worked out. They will be applied for QA of the components during the series production.
As its fundamental function, the brain processes and transmits information using populations of interconnected nerve cells alias neurons. The communication between these neurons occurs via discrete electric impulses called spikes. A core challenge in neuroscience has been to quantify how much information about relevant stimuli or signals a neuron transports in its spike sequences, or spike trains. The recently introduced correlation method allows to determine this so-called mutual information in terms of a neuron’s temporal spike correlations under certain stationarity assumptions. Based on the correlation method, I address several open questions regarding neural information encoding in the cortex.
In the first part (chapter 2), I investigate the role of temporal spike correlations for neural information transmission. Temporal correlations in neuronal spike trains diminish independence in the information that is transmitted by the different spikes and hence introduce redundancy to stimulus encoding. However, exact methods to describe how such spike correlations impact information transmission quantitatively have been lacking. Here, I provide a general measure for the information carried by spike trains of neurons with correlated rate modulations only, neglecting other spike correlations, and use it to investigate the effect of rate correlations on encoding redundancy. I derive it analytically by calculating the mutual information between a time correlated, rate-modulating signal and the resulting spikes of Poisson neurons. Whereas this information is determined by spike autocorrelations only, the redundancy in information encoding due to rate correlations depends on both the distribution and the autocorrelation of the rate histogram. I further demonstrate that, at very small signal strengths, the information carried by rate correlated spikes becomes identical to that of independent spikes, in effect measuring the rate modulation depth. In contrast, a vanishing signal correlation time maximizes information transmission but does not generally yield the information of independent spikes.
In the second part (chapter 3), I analyze the information transmission capabilities of two particular schemes of encoding stimuli in the synaptic inputs using integrate-and-fire neuron models. Specifically, I calculate the exact information contained in spike trains about signals which modulate either the mean or the variance of the somatic currents in neurons, as is observed experimentally. I show that the information content about mean modulating signals is generally substantially larger than about variance modulating signals for biological parameters. This result provides evidence, by means of exact calculations of the mutual information, against the potential benefit of variance encoding that had been suggested previously.
Another analysis reveals that higher information transmission is generally associated with a larger proportion of nonlinear signal encoding. Moreover, I show that a combination of signal-dependent mean and variance modulations of the input current can synergistically benefit information transmission through a nonlinear coupling of both channels. On a more general level, I identify what was previously considered an upper bound as the exact, full mutual information. Furthermore, by analyzing the statistics of the spike train Fourier coefficients, I identify the means of the Fourier coefficients as information-carrying features.
Overall, this work contributes answers to central questions of theoretical neuroscience concerning the neural code and neural information transmission. It sheds light on the role of signal-induced temporal correlations for neural coding by providing insight into how signal features shape redundancy and by establishing mathematical links between existing methods and providing new insights into the spike train statistics in stationary situations. Moreover, I determine what fraction of the mutual information is linearly decodable for two specific signal encoding schemes.
Der Urknall vor ungefähr 13.8 Milliarden Jahren markiert die Entstehung des Universums. Die gesamte Energie und Materie war in einem Punkt konzentriert und expandiert seitdem kontinuierlich. Wenige Sekundenbruchteile nach dem Urknall war die Temperatur und Dichte dieser Materie extrem hoch und die erschaffenen Elementarteilchen, speziell Quarks und Gluonen, durchliefen einen Zustand den man als Quark-Gluon-Plasma (QGP) bezeichnet und innerhalb dessen die starke Wechselwirkung dominiert. Innerhalb dieses Plasmas können Quarks und Gluonen, welche sonst in Hadronen gebunden sind, sich frei bewegen. Die direkte Beobachtung des frühzeitlichen QGPs ist mit heutigen Mitteln nicht möglich. Allerdings ist es möglich die Dynamik und Kinematik innerhalb eines künstlich erzeugten QGPs zu erforschen und damit Rückschlüsse auf die Vorgänge während des Urknalls zu machen.
Um künstliche QGPs unter kontrollierten Bedingungen zu erzeugen, werden heutzutage ultrarelativistische Schwerionen zur Kollision gebracht. Der stärkste je gebaute Schwerionenbeschleuniger LHC befindet sich am Kernforschungzentrum CERN in der Nähe von Genf. Das ALICE Experiment, als eines der vier großen Experimente am LHC, wurde speziell gebaut um das QGP näher zu untersuchen. Vollständig ionisierte Bleikerne werden mit nahezu Lichtgeschwindigkeit in den Experimenten zur Kollision gebracht. Die deponierte Energie lässt die Temperatur der Quarks und Gluonen innerhalb der kollidierenden Nukleonen ansteigen bis eine kritische Temperatur überschritten wird und ein Phasenübergang in das QGP erfolgt. Im Laufe der Kollision kühlt das Medium ab und gelangt unter die kritische Temperatur. Nun werden aus den ehemals freien Quarks Hadronen gebildet. Diese Hadronen oder Zerfallsprodukte dieser Hadronen können daraufhin in die Detektoren des Experiments fliegen und werden dann dort gemessen.
Es gibt mehrere mögliche Observablen des QGP, die messbar mit dem ALICE Experiment sind. Die Observablen, die in dieser Arbeit detailliert untersucht werden, sind die invariante Masse und der Paartransversalimpuls eines Dielektrons. Ein Dielektron besteht aus einem Elektron und einem Positron, welche miteinander korreliert sind. Dielektronen sind ideale Sonden zur Vermessung des QGPs. Sie werden durch verschiedene Prozesse während allen Kollisionsphasen produziert, wie beispielsweise bei den initialen, harten Stößen der kollidierenden Nukleonen oder durch den elektromagnetischen Zerfall verschiedener Hadronen wie π0 und J/ψ. Zusätzlich strahlt das QGP Dielektronen abhängig von seiner Temperatur ab. Theoretisch erlaubt dies die direkte Temperaturmessung des QGPs. Ein weiterer Vorteil der Dielektronenmessung gegenüber der Messung von Hadronen liegt darin, dass Elektronen und Positronen keine Farbladungen tragen und somit auch nicht mit der dominierenden starken Wechselwirkung innerhalb des QGPs interagieren und somit unbeeinflusst Informationen über seine Dynamik liefern können.
In dieser vorliegenden Arbeit werden Dielektronenspektren als Funktion der invarianten Masse und des Paartransversalimpulses in Blei-Blei-Kollisionen mit einer Schwerpunktsenergie von √sNN = 5.02 TeV gemessen. Das erste Mal in Schwerionenkollisionen konnte an einem der großen LHC Experimente der minimale Transversalimpuls der gemessenen Elektronen und Positronen auf peT > 0.2 GeV/c minimiert werden. Dies gibt im Vergleich zu der publizierten Messung mit peT > 0.4 GeV/c die Möglichkeit auch sogenannte weiche Prozesse zu messen, erhöht aber auch den Komplexit ätsgrad der Messung durch massiv gesteigerten Untergrund. Zusätzlich ist die Messung zentralitäsabhängig durchgeführt. Zentralität ist ein Maß für den Abstand der beiden Bleikerne zum Zeitpunkt der Kollision. Je zentraler eine Kollision, desto größer ist die deponierte Energie und desto größer und heißer ist das erzeugte QGP und die daraus resultierenden Effekte.
Die gemessenen Dielektronenverteilungen werden mit dem erwarteten Beiträgen aus hadronischen Zerfällen verglichen. Die Messung ergibt, dass der Beitrag aus semileptonischen Zerfällen von Charmquarks gemessen im Vakuum, welcher mit der Anzahl der binären Nukleon-Nukleon-Kollisionen in Blei-Blei-Ereignissen hochskaliert ist, nicht das Dielektronenspektrum beschreibt. Eine Modifizierung des Beitrag gemäß des unabhängig gemessenen nuklearen Modifikationsfaktors für einzelne Elektronen aus Charm- und Beautyquarks verbessert die Beschreibung des Dielektronenspektrums. Zusätzlich wurde der Beitrag virtueller direkter Photonen abgeschätzt. Die gemessenen Werte sind vergleichbar mit vorangegangenen Messungen bei einer niedrigeren Schwerpunktsenergie. Ebenso ist es möglich in periphären Kollisionen einen Beitrag durch eine Quelle zu vermessen, die Dielektronen bei niedrigem Transversalimpuls pT,ee < 0.15 GeV/c aussendet.
In this thesis, we presented the theoretical description of the magnetic properties of various frustrated spin systems. Especially in search of exotic states, such as quantum spin liquids, magnetically frustrated systems have been subject of intense research within the last four decades. Relating experimental observations in real materials with theoretical models that capture those exotic magnetic phenomena has been one of the great challenges within the field of magnetism in condensed matter.
In order to build such a bridge between experimental observations and theoretical models, we followed two complementary strategies in this thesis. One strategy was based on first principles methods that enable the theoretical prediction of electronic properties of real materials without further experimental input than the crystal structure. Based on these predictions, low-energy models that describe magnetic interactions can be extracted and, through further theoretical modelling, can be compared to experimental observations. The second strategy was to establish low-energy models through comparison of data from experiments, such as inelastic neutron scattering intensities, with calculated predictions based on a variety of plausible magnetic models guided by microscopic insights. Both approaches allow to relate theoretical magnetic models with real materials and may provide guidance for the design of new frustrated materials or the investigation of promising models related to exotic magnetic states.
The diffusive behavior of macromolecules in solution is a key factor in the kinetics of macromolecular binding and assembly, and in the theoretical description of many experiments. Experiments on high-density protein solutions have found that a slow down of the diffusion dynamics is larger than expected from colloidal theory for non-interaction hard-spheres. It has also been shown that the rotational diffusion anisotropy in high-density protein solutions is larger than in dilute ones. High-density protein solutions are a complex fluid that is different from the neat fluid assumption used in the hydrodynamic theory. It is therefore important to have methods to accurately calculate the translational and rotational diffusion tensor from simulations as well as simulation algorithms to explore high-density solutions.
Simulations provide a powerful tool to study diffusion in complex fluids. They can be used to study the macroscopic and microscopic effects of complex fluids on the diffusive behavior. There has been already a lot of work done to accurately simulate diffusion and to determine the diffusion coefficients from simulations.
The translational diffusion of molecules in simple and complex liquids can be determined with high accuracy from simulations. This is not yet the case for rotational diffusion. Existing algorithms to calculate the rotational diffusion coefficients from simulations make assumptions about the shape of the protein or only work at short times. For the simulation of diffusive behavior of macromolecules two options exist today. An all-atom integrator with explicit solvent molecules or coarse-grained (CG) simulations with an implicit solvent. CG simulations of dynamic behavior with implicit solvent are also called Brownian dynamics (BD) simulations. For the CG simulations the Ermak-McCammon algorithm is often used to solve the underlying Langevin equation. The algorithm is an extension of the Euler-Maruyama integrator to include translation and rotation in three dimensions. This algorithm only correctly reproduces the equilibrium probability for short time-steps and the error depends linearly on the time-step. It has been shown that Monte Carlo based algorithms can produce BD for translational dynamics, when appropriately parametrized. The advantage of Monte Carlo based algorithm is that they will reproduce the correct equilibrium distribution independent of the chosen time-step. This in return allows choosing larger time-steps in simulations. The aim of this thesis is to develop novel´methods to accurately determine the rotational diffusion coefficient from simulations and extend existing Monte Carlo algorithms to include rotational dynamics.
The first project addresses the question of how to accurately determine the rotational diffusion coefficients from simulations. We develop a quaternion based method to calculate the rotational diffusion tensor from simulations and a theory for the effects of periodic boundary conditions (PBC) on the rotational diffusion coefficient in simulations.
Our method for calculating rotational diffusion coefficients is based on the quaternion covariances from Favro for a freely rotating rigid molecule. The covariances as formulated by Favro are only valid in the principal coordinate system (PCS) of the rotation diffusion tensor. The covariances can be generalized for an arbitrary reference coordinate system (RCS), i.e., a simulation, given the principle axes of the rotational diffusion tensor in the RCS. We show that no prior knowledge of the diffusion tensor and its principal axes is required to calculate the generalized covariances from simulations using common root-mean-square distance (RMSD) procedures. We develop two methods to fit the covariances calculated from simulations to our generalized equations to fit the rotational diffusion tensor. In the first method we minimize the sum of the squared error deviations between model and simulation data. For this six dimensional optimization we use a simulated annealing algorithm. Alternatively the rotational diffusion tensor can also be determined from a eigenvalue decomposition of covariance after integration. To minimize the effects of sampling noise in the integration we first apply a Laplace-transformation to smooth the covariances at large times. For ideal sampling the resulting rotational diffusion coefficient should be independent of the value of the Laplace variable. In practice, however, the best results are achieved using a value close to the inverse autocorrelation time of the rotational motion.
...
In this work we provided additional insights into our understanding of bulk QCD matter through the study of the transport coeffcients which govern the non-equilibrium microscopical processes of statistical ensembles. Specically, we focused on the low energy regime corresponding to the hadron gas, as the properties of this region of the phase diagram are still relatively unknown, and existing calculations for the transport coeffcients are either scarce, contradictory, or somewhat limited in scope; this thesis' main goal was thus to shed some light on this by providing new independent calculations of these quantities.
We subsequently presented two formalisms which can be used to calculate transport coeffcients. The first one (which also was the main tool we used in the following chapters to produce our results) relies on the development of so-called Green-Kubo formulas, which relate non-equilibrium dissipative fluctuations with transport coeffcients; notably, the off-diagonal components of the energy-momentum tensor are shown to be related to the shear viscosity, its diagonal components to the bulk viscosity and fluctuations in the electric current can be related to the electric conductivity. We additionally introduced two new conductivities, namely the baryon-electric and strange electric conductivities, which we dubbed, together with the already known electric one, the "cross-conductivity", which encodes information about how electric fluctuations are correlated to changes in electric, baryonic or strange currents, or vice-versa. The second way of calculating transport coeffcient which we discussed consists in linearizing the collision term of the Boltzmann equation through the Chapman-Enskog formalism. While in principle providing direct semi-analytical results for the transport coeffcients, this approach is complicated to implement when more than a few species are considered, and as such was then mostly used as a tool to calibrate our Green-Kubo calculations.
The hadron gas model that we used for all calculations, namely the transport approach SMASH, was then presented. The main features of the model were explained, such as the collision criterion, the considered degrees of freedom and the specific way in which they microscopically interact with each other. It was verified that SMASH does reproduce analytical results of the Boltzmann equation in an expanding universe scenario, thus showing the equivalence of this transport approach and the associated kinetic theory results. A special care was taken to detail the ways in which a state of thermal and chemical equilibrium (which is necessary for Green-Kubo relations to be valid) can be reached and described using SMASH.
...
Ziel der vorliegenden Arbeit war die Optimierung der Kristallzüchtung von eisenbasierten Supraleitern. Im ersten Teil lag der Fokus dabei auf der Züchtung der 1111-Verbindung unter Hochdruck/Hochtemperaturbedingungen (HD/HT), sowie der systematischen Untersuchung verschiedener Einflüsse der Züchtung dieser Familie unter Normaldruckbedingungen.
Die HD/HT-Experimente führten unter den gewählten Parametern, sowohl unter der Verwendung eines Flussmittels als auch ohne, nicht zur Stabilisierung der gewünschten Zielphase. Stattdessen kam es zur Phasenseparation So bildete sich immer im Inneren des verwendeten BN-Tiegels ein, häufig kugelförmig ausgeformtes, Gebilde, bestehend aus einer Fe-As-Phase. Dies gilt sowohl für NdFeAsO als auch LaFeAsO1-xFx. Bei der Verwendung von Salz als Flussmittel kam es neben dieser Fe-As-Phase auch häufig zur Bildung einer Cl-haltigen Phase. Auch zeigte sich, dass es zu einer B-Diffusion während des Versuches kam, sodass Selten-Erd-Oxoborate nachgewiesen werden konnten. Durch einen Versuch unter Normaldruckbedingungen zeigte sich, dass dies kein Problem in der Hochdrucksynthese ist, sondern ein grundlegendes Problem bei der Verwendung von BN mit den Selten-Erden ist.
Nachdem gezeigt wurde, dass eine systematische Untersuchung bzw. Optimierung der Züchtungsparameter der 1111-Verbindungen unter HD/HT-Bedingungen enorm schwierig ist, lag der weitere Fokus auf der Züchtung unter Normaldruckbedingungen. Dazu wurde zu Beginn gezeigt, dass die Verwendung von Quarzampullen bei Temperaturen bis zu 1200 °C nicht zu einer zusätzlichen Sauerstoffdiffusion führen. Dies ermöglichte es ohne zusätzliche Schweißarbeit oder hohen Kosten den Optimierungsprozess für ein geeignetes Temperatur-Zeit-Profil durchzuführen. Das so erhaltene Profil wurde anschließen für alle weiteren Versuche verwendet. Mit dieser Basis wurde daraufhin untersucht, welchen Einfluss die Menge an Flussmittel auf die Stabilisierung der Phase und demnach auf die Kristallzüchtung hat. Dabei zeigte sich, dass ein molares Material-zu-Flussmittel-Verhältnis von 1:7 die besten Resultate liefert. Der nächste Optimierungsschritt, die Frage nach einem geeigneten Sauerstoffspender, in Angriff genommen. Bei dieser Frage wurde sich auf einen Sauerstoffspender aus der Gruppe der Eisenoxide konzentriert. Es zeigte sich, dass, für das gewählte Temperatur-Zeit-Profil die Verbindung FeO und Fe3O4 die besten Resultate liefern. In diesen Versuchen ist es gelungen Kristalle zu züchten die Kantenlängen bis zu 800 μm aufweisen. Allerdings zeigten Vergleichsversuche mit einen anderen Temperatur-Zeit-Profil, dass Fe2O3 in diesen Fällen die besten Resultate liefern. Dies macht deutlich, dass es bisher keine vollständige Kontrolle in der Züchtung der 1111-Verbindung gibt. Die Veränderung eines Züchtungsparameters bedeutet, dass auch alle anderen Parameter erneut geprüft werden müssen. Somit zeigte sich, dass eine fundierte und systematische Untersuchung der Züchtungsparameter notwendig ist.
Nachdem die grundlegenden Fragen für die undotierte Verbindung NdFeAsO beantwortet wurden, wurde untersucht, welche Sauerstoff-Fluorspenderkombination bei gegebenem Temperatur-Zeit-Profil optimal für den Kristallwachstum und den Fluoreinbau ist. Die erhaltenen Resultate belegten, dass in diesem Fall Fe3O4 und FeF2 zu den besten Resultaten führte. Die so gezüchteten Kristalle wiesen Kantenlängen bis zu 800 μm auf und Messungen des elektrischen Widerstandes zeigten einen maximalen Tc ≈ 53 K mit einen RRR-Wert im magnetischem Bereich von über 10. Damit unterscheiden sich die gezüchtete Kristalle hinsichtlich ihrer Qualität um den Faktor ~3 von den bisherigen Einkristallen bekannt aus der Literatur.
Durch die Ermittlung des reellen Fluorgehalts der Proben mittels WDX in Kombination mit elektrischen Widerstandsmessungen wurde ein vorläufiges Phasendiagramm erstellt.
Magnetische Messungen unter Normaldruck und Hochdruckbedingungen ermöglichten es die Anisotropie zwischen der ab- Ebene und der c-Ebene zu messen, sowie das Verhalten des elektrischen Widerstandes in Abhängigkeit vom Druck.
Es zeigte sich dabei, dass ab einem Druck von etwa 22.9 GPa die Supraleitung in diesen Kristallen nicht mehr vorhanden ist, und der Kristall wieder normalleitend ist. Mit weiter steigendem Druck steigen die Absolut-Widerstandswerte ebenfalls wieder an, was auf eine mögliche ferromagnetische Ordnung deutet.
Im zweiten Teil der Arbeit lag der Fokus auf einer Verbindung aus der 122-Familie der Pniktide: SrFe2As2. Zu Beginn wurde untersucht, welches der drei gewählten Tiegelmaterialien BN, Al2O3 oder Glaskohlenstoff, für Züchtungen dieser Phase am geeigneten ist. In allen Versuchen konnte die gewünschte Zielphase stabilisiert werden, jedoch kam es bei der Verwendung von Glaskohlenstoff zu Diffusion von Kohlenstoff aus dem Tiegel in die Probe hinein, sodass C-haltige Phasen nachweisbar waren. Ebenso zeigte sich, dass es auch eine Diffusion vom Material in den Tiegel hinein gegeben hat. Diese Probleme traten auch bei der Verwendung von Al2O3 auf. Durch ein Röntgenpulverdiffrakgtogramm konnte eine Al-haltige Verbindung in der Probe nachgewiesen werden. Ein weiterer Nachteil dieses Materials ist die Benutzung des Tiegels durch die Schmelze. Von den drei Materialien erwies sich BN als am besten geeignetes Tiegelmaterial. Es kommt zu keiner Benetzung oder Diffusion, auch der Fremdphasenanteil ist sehr gering in dieser Probe.
Mit diesem Wissen wurde im weiteren Verlauf ein quasi-binäres Phasendiagramm des Systems SrFe2As2-FeAs erstellt. Die intermetallische Verbindung FeAs fungiert hierbei als Flussmittel. Eine wichtige Frage in diesem Zusammenhand ist die Frage ob das System kongruent erstarrend ist. Diese Frage lässt sich anhand der vorhandenen DTA-kurven nicht eindeutig beantworten, zeigte das System bei Aufheizen keine zusätzlichen Schmelzprozesse, es scheint allerdings, dass es in der Schmelze zu einem Abdampfen von Arsen kommt. Somit verschiebt sich die Zusammensetzung der Schmelze und beim Abkühlen treten zusätzliche Erstarrungsprozesse auf. Die Schmelztemperatur TM wurde so auf T = 1320 °C bestimmt. Mit steigendem Flussmittelanteil verschob sich diese Temperatur zu niedrigeren Temperaturen unter 1200 °C, was eine Züchtung in Quarzampullen wieder möglich macht.
Die Ergebnisse in dieser Arbeit liefern eine fundierte Grundlage für weitere Optimierungen. So ist zum Beispiel der Frage nach dem am besten geeigneten Sauerstoffspender nicht auf die Selten-Erd-Oxide eingegangen worden. Auch ob die Verwendung eines anderen Salzes, wie zum Beispiel den Iodiden für die Züchtung bessere Resultate liefert kann weiterhin untersucht werden.
Nachdem der Schmelzpunkt von SrFe2As2 bestimmt wurde und im quasi-binärem Phasendiagramm ein Eutektikum vorhanden ist, kann mit den weiteren Optimierungsschritten für die Kristallzüchtung dieses Systems begonnen werden. Dazu gehört die Entwicklung eines Temperatur-Zeit-Profils, sowie im nächsten Schritt Züchtungen von dotierten Verbindungen.
Charge states and energy loss of heavy ions after passing an inductively coupled plasma target
(2019)
In various kinds of fields such as accelerator physics, warm dense matter, high energy density physics, and inertial confinement fusion, heavy ions beam-plasma interaction plays an important role, and abundant investigations have been and are being carried out. Taking advantage of a good level of understanding on the interaction between a swift heavy ions beam and a hydrogen gas discharge plasma, an engineering application of a spherical theta-pinch device as a plasma stripper for FAIR (facility for antiproton and ion research) and a scientific application of a swift heavy ions beam as a novel plasma diagnostic tool are proposed and investigated.
The spherical theta-pinch device is manufactured, improved, and comprehensively tested for its application as a plasma stripper. The device is mainly composed of an evacuated glass vessel that can be filled with gas (for example: hydrogen) and a LRC circuit including a capacitors bank and a set of coils. Discharging the device at an initial hydrogen pressure in the glass vessel and an operation voltage for the capacitors bank, a circuit current oscillates in the LRC circuit. The oscillating circuit current in the set of coils induces a corresponding alternating magnetic field inside the glass vessel to ignite and maintain a hydrogen plasma.
Based on the built setup of circuit and plasma diagnostics, the measurements of circuit current, plasma light emission, plasma shape, and hydrogen Balmer series are carried out. The recorded signals of the circuit current and the plasma light emission of many consecutively repetitive discharges overlap perfectly, which indicate a very good reproducibility of the parameters of the LRC circuit during discharge and the generated plasma. From the measured circuit current, a real energy transfer efficiency is calculated by our proposed new model, which shows its overall tendency varying with the hydrogen pressure and the operation voltage, including the maximum value of 25% occurring at an initial hydrogen pressure of around 25 Pa and a maximum operation voltage of 14 kV. So, the discharge at an initial hydrogen pressure of 20 Pa and an operation voltage of 14 ...
We study the Wigner function for massive spin-1/2 fermions in electromagnetic fields. The Wigner function is analytically solved in five cases when electromagnetic fields are constants. For a general space-time dependent field configuration, we use the method of semi-classical expansion and solved the Wigner function at linear order in the Planck's constant. At the same order, we obtained a generalized Boltzmann equation for particle distribution, and a generalized BMT equation for spin polarization. Using the Wigner function, we calculated some physical quantities in a thermal equilibrium system.
The present thesis is primarily concerned with the application of the functional renormalization group (FRG) to spin systems. In the first part, we study the critical regime close to the Berezinskii-Kosterlitz-Thouless (BKT) transition in several systems. Our starting point is the dual-vortex representation of the two-dimensional XY model, which is obtained by applying a dual transformation to the Villain model. In order to deal with the integer-valued field corresponding to the dual vortices, we apply the lattice FRG formalism developed by Machado and Dupuis [Phys. Rev. E 82, 041128 (2010)]. Using a Litim regulator in momentum space with the initial condition of isolated lattice sites, we then recover the Kosterlitz-Thouless renormalization group equations for the rescaled vortex fugacity and the dimensionless temperature. In addition to our previously published approach based on the vertex expansion [Phys. Rev. E 96, 042107 (2017)], we also present an alternative derivation within the derivative expansion. We then generalize our approach to the O(2) model and to the strongly anisotropic XXZ model, which enables us to show that weak amplitude fluctuations as well as weak out-of-plane fluctuations do not change the universal properties of the BKT transition.
In the second part of this thesis, we develop a new FRG approach to quantum spin systems. In contrast to previous works, our spin functional renormalization group (SFRG) does not rely on a mapping to bosonic or fermionic fields, but instead deals directly with the spin operators. Most importantly, we show that the generating functional of the irreducible vertices obeys an exact renormalization group equation, which resembles the Wetterich equation of a bosonic system. As a consequence, the non-trivial structure of the su(2) algebra is fully taken into account by the initial condition of the renormalization group flow. Our method is motivated by the spin-diagrammatic approach to quantum spin system that was developed more than half a century ago in a seminal work by Vaks, Larkin, and Pikin (VLP) [Sov. Phys. JETP 26, 188 (1968)]. By embedding their ideas in the language of the modern renormalization group, we avoid the complicated diagrammatic rules while at the same time allowing for novel approximation schemes. As a demonstration, we explicitly show how VLP's results for the leading corrections to the free energy and to the longitudinal polarization function of a ferromagnetic Heisenberg model can be recovered within the SFRG. Furthermore, we apply our method to the spin-S Ising model as well as to the spin-S quantum Heisenberg model, which allows us to calculate the critical temperature for both a ferromagnetic and an antiferromagnetic exchange interaction. Finally, we present a new hybrid formulation of the SFRG, which combines features of both the pure and the Hubbard-Stratonovich SFRG that were published recently [Phys. Rev. B 99, 060403(R) (2019)].
Ziel der vorliegenden Arbeit ist der Aufbau von koaxialen Plasmabeschleunigern und deren Verwendung für die Untersuchung der Eigenschaften von kollidierenden Plasmen. Zukünftig sollen diese kollidierenden Plasmen als intensive Strahlungsquelle im Bereich der ultravioletten (UV-) und vakuumultravioletten (VUV-)Strahlung sowie in der Grundlagenforschung als Target zur Ionenstrahl-Plasma-Wechselwirkung Verwendung finden. Für diese Anwendungen steht dabei eine Betrachtung der physikalischen Grundlagen im Vordergrund. So sind neben der Kenntnis der Plasmadynamik auch Aussagen bezüglich der Elektronendichte, der Elektronentemperatur und der Strahlungsintensität von Bedeutung. Im Einzelnen konnte gezeigt werden, dass es möglich ist, durch eine Plasmakollision die Elektronendichte des Plasmas im Vergleich zu der eines einzelnen Plasmas deutlich zu erhöhen - im Maximalfall um den Faktor vier. Gleichzeitig stieg durch die Plasmakollision die Lichtintensität im Wellenlängenbereich der UV- und VUV-Strahlung um den Faktor drei an...
High-energetic heavy-ion collisions offer the unique opportunity to produce and to study dense nuclear matter in the laboratory. The future Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany, will provide beams of heavy nuclei up to kinetic energies of 11 GeV/nucleon. At these energies, the nuclear matter in the collision zone of two nuclei will be compressed to densities of up to 5 − 10 times the saturation density of atomic nuclei, similar to matter densities existing in the core of massive neutron stars. Under those conditions, nucleons are expected to melt and form a new state of matter, which consists of quarks and gluons, the so called Quark-Gluon Plasma (QGP). The search for such a phase transition from hadronic to partonic matter, and the exploration of the nuclear matter equation-of-state at high densities are the major goals of heavy ion experiments worldwide.
The observables, which are proposed to probe the properties of dense nuclear matter and possible phase transitions, include multi-strange hyperons, antibaryons, lepton pairs, collective flow of identified particles, fluctuations and correlations of various particles, particles containing charm quarks, and hypernuclei. These observables have to be measured in multi-dimensions, i.e. as function of collision centrality, rapidity, transverse momentum, energy, emission angle, etc., which requires extremely high statistics. Moreover, some of these particles are produced very rarely.
Therefore, the Compressed Baryonic Matter (CBM) experiment at FAIR is designed to run at collision rates of up to 10 MHz, in order to perform measurements with unprecedented precision. Due to the complicated decay topology of many observables, no hardware trigger can be applied, and the data have to be analysed online in order to filter out the interesting events.
This strategy requires free-streaming read-out electronics, which provides time stamps to all detector signals, a high performance computer center, and high-speed reconstruction algorithms, which provide an online track and event reconstruction based on time and position information of the detector hits (”4-D“ reconstruction).
The core detector of the CBM experiment is the Silicon Tracking System (STS). The main task of the STS is to provide track reconstruction and momentum de- termination of charged particles originating from beam-target interactions. To fulfil the whole tasks the STS is located in the large gap of a superconducting dipole magnet with a bending power of 1 Tm providing momentum measurements for charged particles. The STS comprises 8 detector stations, which are positioned from 30 cm to 100 cm downstream the target. The corresponding active area of the stations grows up from 40×50 cm 2 up to 100×100 cm 2 with a totalarea of 4 m2. The silicon double-sided sensors exhibit 1024 strips on each side with a stereo angle at p-side of 7.5 ◦ and a strip pitch of 58 μm. The strip length ranges from 2 cm for sensors located in a close vicinity to the beam axis, up to 12 cm for other sensors where the flux of the reaction products drops down substantially. In total, the STS consist of 896 sensors mounted on 106 detector ladders. The detector readout electronics dissipates 40 kW and will be equipped with a CO 2 bi-phase cooling system. The detector including electronics will be mounted in a thermal enclosure to allow for sensor operation at below −5 ◦ C which minimizes radiation induced leakage currents.
The task of the STS is to measure the trajectories of up to 800 charged particles per collision with an efficiency of more than 95% and a momentum resolution of 1 − 2%. In order to guarantee the required performance over the full lifetime of the CBM experiment, the detector system has to have a low material budget, a high granularity, a high signal-to-noise (SNR) ratio, and a high radiation tolerance. As a result of optimisation studies, the STS consists of double-sided silicon microstrip sensors, about 300 μm thick, which have to provide a SNR ratio of more than 10, even after radiation with the expected equivalent lifetime fluence of 10 14 1 MeV n eq cm −2.
This thesis is devoted to the characterization of double-sided silicon microstrip sensors with an emphasis on investigation of their radiation hardness. Different prototypes of double sided silicon sensors produced by two vendors have been irradiated by 23 MeV protons up to the double life time fluence for the CBM experiment (2 × 10 14 1 MeV n eq cm −2 ).
The sensor properties have been characterised before and after irradiation. It was found, that after irradiation with a double lifetime fluence the leakage current increased 1000 times, which results in an increased shot noise. Moreover, the relative charge collection efficiency of irradiated with respect to non-irradiated sensors drops down to 85% for the lifetime equivalent fluence, and down to 73% for the double lifetime fluence, both for the p-side and n-side. For non-irradiated sensors the SNR was found to be in the range of 20 − 25, whereas for irradiated sensors it dropped down to 12 − 17.
In addition to the sensor characterization, a part of this thesis was devoted to the optimisation of the sensor readout scheme. In order to investigate the possible increase of SNR, and to reduce the number of readout channels in the outer aperture of STS, three versions of routing lines have been realized for the p-side readout of the sensor prototype, and have been tested in the laboratory and under beam conditions.
The tests have been performed with different inclination angles between beam direction and sensor surface, corresponding to the polar angle acceptance of the CBM experiment, which is from 2.5 ◦ to 25 ◦.
As a result of the studies carried out in this thesis work, the radiation hardness of the double-sided silicon microstrip sensors developed for the CBM STS detector was confirmed. Also the advantage of individual read-out of sensor channels in the lateral regions of the detector was verified. This allowed to start the tendering process for sensor series production in industry, an important step towards the construction of the detector in the coming years.
The Compressed Baryonic Matter experiment (CBM) at FAIR and the NA61/SHINE experiment at CERN SPS aim to study the area of the QCD phase diagram at high net baryon densities and moderate temperatures using heavy-ion collisions. The FAIR and SPS accelerators cover energy ranges 2-11 and 13-150 GeV per nucleon respectively in laboratory frame for heavy ions up to Au and Pb. One of the key observables to study the properties of a matter created in such collisions is an anisotropic transverse flow of particles.
In this work, the performance of the CBM experiment for anisotropic flow measurements is studied with Monte-Carlo simulations using gold ions at SIS-100 energies employing different heavy-ion event generators. Also, procedures for centrality estimation and charged hadron identification are described and corresponding frameworks are developed.
The measurement of the reaction plane angle is performed with Projectile Spectator Detector (PSD), which is a hadron calorimeter located at a very forward angle. To prevent radiation damage by the high-intensity ion beam, the PSD has a hole in the center to let the beam pass through. Various combinations of CBM detector subsystems are used to investigate the possible systematic biases in flow and centrality measurements. Effects of detector azimuthal non uniformity and the PSD beam hole size on physics performance are studied. The resulting performance of CBM for flow measurements is demonstrated for identified charged hadron anisotropic flow as a function of rapidity and transverse momentum in different centrality classes.
The measurement techniques developed for CBM were also validated with the experimental data recently collected by the NA61/SHINE experiment at CERN SPS for Pb+Pb collisions at the beam momenta 30A GeV/c. Compared to the existing data from the NA49 experiment at the CERN SPS, the new data allows for a more precise measurement of anisotropic flow harmonics. The fixed target setup of NA61/SHINE also allows extending flow measurements available from the STAR at the RHIC beam energy scan (BES) program to a wide rapidity range up to the forward region where the projectile nucleon spectators appear. In this thesis, an analysis of the anisotropic flow harmonics in Pb+Pb collisions at beam momenta 30A GeV/c collected by the NA61/SHINE experiment in the year 2016 is presented. Flow coefficients are measured relative to the spectator plane estimated with the Projectile Spectators Detector (PSD). The flow coefficients are obtained as a function of rapidity and transverse momentum in different classes of collision centrality. The results are compared with the corresponding NA49 data and the measurements from the RHIC BES program.
Entwicklung und Inbetriebnahme zweier supraleitender 217 MHz CH-Strukturen für das HELIAC-Projekt
(2019)
Im Rahmen der hier vorgestellten Arbeit wurden zwei baugleiche CH-Strukturen für das im Bau befindliche HELIAC-Projekt (HELmholtz LInear ACcelerator) entwickelt und während der Produktion bis hin zu den finalen Kalttests bei 4.2 K begleitet. Zusammen mit der CH-Struktur des Demonstrator-Projektes ermöglichen sie die vollständige Inbetriebnahme und den ersten Strahltest des ersten Kryomoduls des HELIAC's, welcher aus vier Kryomodulen mit insgesamt 12 CH-Strukturen besteht. Im Vergleich zu bisherigen CH-Strukturen wurde das Design der Kavitäten im Rahmen dieser Dissertation grundlegend überarbeitet und optimiert. Durch die Entfernung der Girder und die konisch geformten Endkappen konnte die Stabilität der neuen CH-Strukturen deutlich erhöht werden, sodass die Drucksensitivität im Vergleich zur ersten CH-Kavität des Demonstrator-Projektes um ca. 80% reduziert werden konnte. Durch die nach außen gezogenen Lamellen der dynamischen Tuner konnte die mechanische Spannung sowie die benötigte Anzahl an Lamellen und damit das Risiko für das Auftreten von Multipacting reduziert werden. Das verringerte Risiko für Multipacting durch die entsprechenden Optimierungen der Kavitäten konnte durch die dauerhafte Überwindung aller Multipacting-Barrieren in den späteren Messungen verifiziert werden. Die Optimierung beider Kavitäten erfolgte dabei mit Hilfe der Simulationsprogramme CST Studio Suite und Ansys Workbench.
Beide Kavitäten wurden von der Firma Research Instruments (RI) gefertigt und während der gesamten Konstruktion durch diverse Zwischenmessungen überwacht. Nach jedem einzelnen Produktionsschritt wurden alle Einflüsse auf die Resonanzfrequenz so präzise ermittelt, dass die Zielfrequenz bei 4.2 K auf mehr als 1‰ genau erreicht werden konnte. Sowohl während der Zwischenmessungen als auch während den finalen Messungen bei 4.2 K wurden automatisierte Aufzeichnungsroutinen verwendet, welche eine sekundengenaue Auslese der Messdaten und damit eine hohe Messgenauigkeit ermöglichten. Im Hinblick auf die Komplexität der CH-Strukturen sind die geringen Abweichungen von der Zielfrequenz der direkte Beweis dafür, wie erfolgreich und präzise die Auswertungen und daraus folgenden Abschätzungen der einzelnen Zwischenmessungen waren. Insgesamt konnten bis auf die mechanischen Eigenmoden alle Ergebnisse der Simulationen durch entsprechende Messungen in guter Näherung verifiziert werden. In jeder Kavität wurden zwei dynamische Tuner verbaut, welche statische und dynamische Frequenzabweichungen im späteren Betrieb ausgleichen können. Die dynamischen Tuner wurden hinsichtlich ihrer mechanischen Stabilität und der erzeugbaren Frequenzänderung sowie ihrer mechanischen Eigenfrequenzen ausführlich mit Hilfe der Simulationsprogramme CST Studio Suite und Ansys Workbench untersucht und optimiert. Um die Ergebnisse der Simulationen zu überprüfen wurden ein eigens dafür entworfener und in der Werkstatt des Instituts für Angewandte Physik gefertigter Messaufbau verwendet, welcher es ermöglichte alle entscheidenden Eigenschaften der dynamischen Tuner präzise zu vermessen. Insgesamt stellen die ausführlichen Messungen mit Hilfe des entworfenen Aufbaus die bisher umfassendsten Messungen dynamischer Balgtuner innerhalb supraleitender CH-Strukturen dar und zeigen, mit welchen Abweichungen zwischen Simulationen und Messungen bei zukünftigen Kavitäten zu rechnen ist. Auch die Feldverteilung entlang der Strahlachse wurde während der Produktion der Kavitäten mit Hilfe der Störkörpermessmethode überprüft. Die dadurch ermittelten Werte stimmten mit einer maximalen Diskrepanz von 9% sehr gut mit den Simulationen überein.
Um eine möglichst gute Oberflächenqualität zu garantieren wurden an der Innenfläche beider Strukturen mindestens 200µm mit einer Mischung aus Fluss-, Salpeter und Phosphorsäure in mehreren Schritten abgetragen. Durch das Aufteilen der Behandlung in einzelne Schritte konnte der Einfluss der Oberflächenbehandlung auf die Resonanzfrequenz besser abgeschätzt und vorausgesehen werden. Dies führte, zusammen mit den Messungen zur Bestimmung der Drucksensitivität und der thermischen Kontraktion der Kavität beim Abkühlen, zu der hohen Übereinstimmung der gemessenen finalen Resonanzfrequenz mit der Zielfrequenz.
Die abschließenden Kalttests der beiden Kavitäten, ohne Heliummantel, wurden am Institut für Angewandte Physik der Johann Wolfgang Goethe Universität in einem vertikalen Bad-Kryostaten durchgeführt. Die erste CH-Struktur konnte erfolgreich bis zu einem maximalen Feldgradienten von 9.2 MV/m getestet werden, was einer effektiven Spannung von 3.37 MV entspricht. Die unbelastete Güte fiel dabei von anfangs 1.08 ∙ 109 auf 2.6 ∙ 108 ab. Die Vorgaben des HELIAC-Projektes liegen bei einem Beschleunigungsgradienten von 5.5 MV/m mit einer unbelasteten Güte von mindestens 3 ∙ 108. Diese Werte wurden von der ersten Kavität deutlich übertroffen, sodass sie für den Betrieb innerhalb des ersten Kryomoduls uneingeschränkt verwendet werden kann.
Bei der zweiten Kavität trat beim Abkühlen auf 4.2 K ein Vakuumleck auf, welches unter Raumtemperatur nicht detektierbar war. Aufgrund der schlechten Vakuumbedingungen innerhalb der Kavität konnten somit keine Messungen hinsichtlich der Leistungsfähigkeit durchgeführt werden, solange das Kaltleck vorhanden war. Ein erneuter Kalttest der Kavität nach Beseitigung des Lecks konnte zeitlich nicht mehr im Rahmen dieser Arbeit durchgeführt werden und ist aus diesem Grund Gegenstand nachfolgender Untersuchungen.
Insgesamt stellen die Entwicklungen, Untersuchungen und Messungen im Rahmen der hier vorgestellten Dissertation einen entscheidenden Schritt zur Inbetriebnahme des ersten Kryomoduls des HELIAC's sowie der Entwicklung weiterer CH-Kavitäten dar. Das überarbeitete Design der CH-Strukturen hat sich als erfolgreich erwiesen, weswegen es als Ausgangspunkt für die Entwicklung aller nachfolgenden CH-Strukturen des HELIAC, bis hin zur Fertigstellung des kompletten Beschleunigers, verwendet wird.
The brain is a large complex system which is remarkably good at maintaining stability under a wide range of input patterns and intensities. In addition, such a stable dynamical state is able to sustain essential functions, including the encoding of information about the external environment and storing memories. In order to succeed in these challenging tasks, neural circuits rely on a variety of plasticity mechanisms that act as self-organizational rules and regulate their dynamics. Based on toy models of self-organized criticality, this stable state has been proposed to be a phase transition point, poised between distinct types of unhealthy dynamics, in what has become known as the critical brain hypothesis. It is not yet known, however, if and how self-organization could drive biological neural networks towards a critical state while maintaining or improving their learning and memory functions.
Here, we investigate the emergence of criticality signatures in the form of neuronal avalanches due to self-organizational plasticity rules in a recurrent neural network. We show that power-law distributions of events, widely observed in experiments, arise from a combination of biologically inspired synaptic and homeostatic plasticity but are highly dependent on the external drive. Additionally, we describe how learning abilities and fading memory emerge and are improved by the same self-organizational processes. We finally propose an application of these enhanced functions, focusing on sequence and simple language learning tasks.
Taken together, our results suggest that the same self-organizational processes can be responsible for improving the brain’s spatio-temporal learning abilities and memory capacity while also giving rise to criticality signatures under particular input conditions, thus proposing a novel link between such abilities and neuronal avalanches. Although criticality was not verified, the detailed study of self-organization towards critical dynamics further elucidates its potential emergence and functions in the brain.
Als Plasmafenster wird ein Aufbau bezeichnet, welcher zwei Bereiche unterschiedlicher Drücke voneinander trennt, Teilchenstrahlen jedoch nahezu verlustfrei passieren lässt.
Diese Anwendung einer kaskadierten Bogenentladung wurde von A. Hershcovitch vorgeschlagen.
Im Rahmen dieser Arbeit wurde ein solches Plasmafenster mit Kanaldurchmessern von 3.3 mm und 5.0 mm aufgebaut sowie die erreichbaren Druckunterschiede untersucht.
Auf der Bestimmung des Einflusses der Plasmaparametern und deren Abhängigkeit von äußeren Parametern auf die erreichbare Trennung der Druckbereiche liegt der Schwerpunkt dieser Arbeit.
Ein ausgeklügeltes optisches System ermöglicht die simultane Aufnahme mehrerer Spektren entlang der Entladungsachse, welche die gleichzeitige Bestimmung der Elektronendichte und -temperatur ermöglichen.
Für die Analyse der Plamaparameter aus über 6700 Spektren wird eine selbst entwickelte Software genutzt.
Die gemessenen Elektronendichte reicht von 8e14 cm^-3 bis zu 4.2e16 cm^-3.
Sie skaliert sowohl mit der Entladungsstromstärke als auch dem Teilchenfluss.
Für die Elektronentemperatur stellen sich Werte zwischen 1 eV und 1.3 eV ein, sie variiert nur leicht mit der Stromstärke und dem Teilchenfluss.
Wie später gezeigt wird, stimmen die hier präsentierten Daten gut mit Ergebnissen aus Simulationen und Experimenten anderer Arbeitsgruppen überein.
Als Betriebsgas wurde eine 98%Ar-2%H2 Mixtur genutzt, da die Stark-Verbreiterung der H-beta-Linie sowie die physikalischen Eigenschaften von Argon gut beschrieben sind und somit eine akkurate Elektronendichte- und -temperaturbestimmung ermöglichen.
Während die Drücke auf der Niederdruckseite einigen mbar entsprechen, werden auf der Hochdruckseite Drücke bis zu 750 mbar bei Teilchenflüsse zwischen 4.5e20 s^-1 und 18e20 s^-1 sowie Stromstärken von 45 A bis 60 A erreicht.
Die erzielten Druckverhältnisse entsprechen Werten zwischen 40 und 150, was eine Steigerung um einen Faktor von bis zu 12 gegenüber dem Druckverhältnis einer einfachen differentiellen Pumpstufe entspricht.
Zusätzlich zur Trennung der Druckbereiche kann am vorgestellten Experiment die Starkverbreiterung von Emissionslinien untersucht werden.
Vorteilhaft gegenüber anderen Aufbauten ist hier die Möglichkeit, zeitgleich Spektren unterschiedlicher Elektronendichten aufzunehmen.
Die entwickelte Software ist in der Lage, akkurate Halbwertsbreiten zu bestimmen und daher für eine solche Anwendung gut geeignet.
Alleinstellungsmerkmale dieses Aufbaus sind unter anderem die angesprochene Möglichkeit der simultanen Bestimmung von Plasmaparamertern und Linienverbreiterungen sowie der Verzicht auf Keramikisolatoren zwischen den Kühlplatten des Aufbaus.
Optische Analysen ergaben keine signifikante Schädigung der Bestandteile des Aufbaus nach einer Betriebsdauer von über 10 h; einzig die Kathodenspitzen müssen alle 5 h ausgetauscht werden.
Im Rahmen der hier vorgestellten Arbeit wurden eine Master- sowie Bachelorarbeit betreut und erfolgreich zum Abschluss gebracht.
Wie im Rahmen dieser Arbeit gezeigt, ist das entwickelte Plasmapfenster in der Lage, zwei Bereiche unterschiedlicher Drücke zu trennen und diese Trennung sicher aufrecht zu erhalten.
Die zugrundeliegenden Plasmaparameter sind erforscht und ihr Einfluss auf die Trennungseigentschaft des Plasmafensters beschrieben.
Als nächsten Schritt bietet sich die Erschließung technischer Einsatzmöglichkeiten des Plasmafensters an, so könnte dieses als Plasmastripper oder zum Schutz einer Beschleunigerstruktur vor durch Kollisionsexperimente entstandene radioaktive Isotope oder Sekundärteilchen.
High resolution gamma spectroscopy with sophisticated detector arrays significantly contributes to nuclear structure physics. The Advanced Gamma Tracking Array (AGATA) combines gamma tracking and pulse shape analysis to achieve an efficiency and quality of the spectra that could not be reached with spectrometers of the previous generation. Tracking of the photons interacting in the detector requires a precise knowledge of the individual interaction positions. The task of the pulse shape analysis is to provide a position resolution of better than $5mm$ FWHM, a value that could not be achieved by segmentation of the detector alone. As the signals induced on the electrodes of the detectors depends on the position of interaction, the charge pulses can be used to infer the interaction position. To be able to handle high rates, algorithms that are used have to be optimized to be able to process the data in real-time. Pulse shape analysis is the most involved part of the real-time processing and requires further improvement. This work is dealing with optimizations and improvements of pulse shape analysis algorithms. The Grid Search algorithm localizes the interaction position by comparing the measured pulse shape with precomputed shapes in a database to find the best fit. Two linear filters based on orthogonal transformations have been compared and it could be concluded that the one based on a singular value decomposition of the pulse shapes works best. It speeds up the pulse shape analysis by a factor of roughly $2-3$ (depending on how it is combined with the other modifications). Further, a new method to exclude most signals from the database as best fit has been developed based on the principle of lateration. Most interaction positions can be excluded by means of a fast check and for single interactions on average only $34.8\%$ of all signals from the database have to be compared to the measured one. The overhead introduced by the method is negligible and the reduced number of comparisons almost direclty translates into increased efficiency of the algorithm. A similar method could also be applied for double interactions. Two or more interactions taking place in the same segment require special treatment as the measured signals cannot be directly compared to signals from the database. A new method to calculate the figure of merit that quantifies the fit in case of a double interaction has been introduced. Compared to the unmodified algorithm the new method finds the best fit for double interactions roughly two orders of magnitude faster. Actually, the time required to localize double interactions is almost the same as for single interactions. Apart from optimizing the algorithm, also the achievable position resolution was investigated. It strongly varies inside the volume of the detector and it crucially depends on the shape of all signals in the database and the amplitude of the noise present in the measured signals. As a first step towards a precise analytic expression for the position resolution, an estimate for the probability to find the correct position has been derived.
Die vorliegende Dissertation untersucht die Nichtgleichgewichtsdynamik von relativistischen Schwerionenkollisionen ausgehend von der anfänglichen Produktion von Teilchen durch den Zerfall von Strings, der Bildung eines Quark-Gluon-Plasmas (QGP), dessen kinetische und chemische Äquilibrierung als Funktion der Zeit sowie seine Transporteigenschaften im Gleichgewicht bei endlicher Temperatur und endlichem chemischen Potential. Ein Verständnis der frühen Phase der Schwerionenkollisionen ist insbesondere von großen Interesse, da letztere eine Verbindung zwischen den ersten Nukleon-Nukleon Kollisionen und der Quark-Gluon-Plasma Phase herstellen, die zu einem späteren Zeitpunkt ein gewisses Maß an Thermalisierung zeigt. Allerdings können nur Nichtgleichgewichts-Theorien eine Verbindung zwischen dem anfänglichen QGP und seiner - zumindest partiellen - Thermalisierung herstellen. Um die Dynamik eines stark wechselwirkenden Mediums wie des Quark-Gluon-Plasmas zu beschreiben, reichen übliche Transportgleichungen (basierend auf der Boltzmann-Gleichung) nicht aus und es müssen komplexere Theorien, die auch für stark korrelierte Medien geeignet sind, angewendet werden. Hier kommen hydrodynamische Simulationen oder Transportrechnungen - basierend auf verallgemeinerten Transportgleichungen - zum Einsatz. Solche verallgemeinerte Transportgleichungen, wie die Kadanoff-Baym-Gleichungen, ergeben sich aus der quantenmechanischen Nichtgleichgewichts-Vielteilchentheorie, in der Green’s- Funktionen in Minkowski Raum-Zeit die interessierenden Größen sind, um die Dynamik des betrachteten Mediums zu beschreiben. Mit geeigneten Näherungen kann man so kinetische Transportgleichungen erhalten, die eine einheitliche Behandlung von stabilen und instabilen Teilchen auch außerhalb des Gleichgewichts ermöglichen. Diese Bestandteile bilden die Basis des Transportmodells Parton-Hadron-String Dynamics (PHSD), welches daher ein geeignetes ’Instrument’ ist um die verschiedenen Phasen einer Schwerionenkollision zu analysieren, egal ob die verschiedenen Formen der Materie im Gleichgewicht sind oder nicht.
In dieser Arbeit wird zunächst die Quantenchromodynamik (QCD) vorgestellt und erklärt, wie diese Theorie im Laufe der Jahre entwickelt wurde um ein wichtiger Bestandteil des Standardmodells der Teilchenphysik zu werden. Wir werden weiterhin die verbleibenden Herausforderungen in unserem Verständnis der QCD vorstellen, die sich primär auf das Phasendiagramm der stark wechselwirkenden Materie konzentrieren.
Im zweiten Kapitel untersuchen wir die Nichtgleichgewichts-Feldtheorie und die damit verbundenen Techniken - wie die Keldysh-Kontur - zur Beschreibung der Green’schen Funktionen als wesentlichen Freiheitsgrade. Wir leiten die Evolutionsgleichung für die Green’schen Funktionen her, d. h. die Kadanoff Baym-Gleichungen am Beispiel einer skalaren Feldtheorie.
Im nächsten Kapitel wird das Transportmodell Parton-Hadron-String Dynamics (PHSD), welches die Anwendung der verallgemeinerten Transportgleichungen zur Beschreibung relativistischer Schwerionenkollisionen darstellt, vorgestellt.
Wir beginnen im Kapitel 4 mit der Untersuchung der Nichtgleichgewichtseigenschaften des Quark-Gluon-Plasmas, welches bei relativistischen Schwerionenkollisionen erzeugt wird. Zu diesem Zweck vergleichen wir die Quark-Gluon-Plasmaentwicklung aus dem PHSD mit einem viskosen hydrodynamischen Modell, bei dem ein lokales kinetisches und chemisches Gleichgewicht angenommen wird.
Im Kapitel 5 konzentrieren wir uns auf das frühe Vorgleichgewichtsstadium ultra-relativistischer Schwerionenkollisionen und insbesondere auf die Freiheitsgrade der QGP-Phase in diesem Stadium. Wir untersuchen die Auswirkungen eines QGP, welches anfänglich entweder aus einem System aus massiven Gluonen (Szenario I) oder alternativ aus Quarks und Antiquarks (Szenario II) besteht. Das nächste Kapitel wird ebenfalls die Produktion von Teilchen im Frühstadium von Schwerionenkollisionen behandeln, jedoch bei niedrigeren Kollisionsenergien. Hier wird eine mikroskopische Beschreibung des K+/pi+-Verhältnisses im Vordergrund stehen, d. h. die Erklärung des Maximums in diesem Verhältnis bei etwa 30 A GeV ("Horn") in zentralen Au+Au (oder Pb+Pb) Kollisionen. Insbesonders werden wir die Modifikation des String-Fragmentierungsprozesses (über den Schwinger-Mechanismus) in einer Umgebung mit hoher hadronischer Dichte aufgrund der teilweisen Wiederherstellung der chiralen Symmetrie untersuchen.
In Kapitel 7 erweitern wir das Parton-Hadron-String Dynamics (PHSD)-Transportmodell im partonischen Sektor, indem wir explizit die totalen und differentiellen partonischen Streuungsquerschnitte als Funktion der Temperatur T und des baryochemischen Potentials μB berechnen auf der Basis der effektiven Propagatoren und Kopplungen des Dynamical QuasiParticle Models (DQPM), welches auch die generelle Zeitentwicklung der partonischen Freiheitsgrade beschreibt. Wir finden nur eine sehr bescheidene Änderung von n/s mit dem baryonchemischen Potential μB in Abhängigkeit von der skalierten Temperatur T/Tc(μB). Dies gilt auch für eine Vielzahl von hadronischen Observablen aus zentralen A+A Kollisionen im Energiebereich von 5 GeV < vsNN < 200 GeV bei der Implementierung der differentiellen Querschnitte in das PHSD-Modell. Da wir in Schwerionen-Observablen nur kleine Spuren einer μB-Abhängigkeit finden - obwohl die effektiven Partonenmassen und Kollisionsbreiten sowie deren Partonenquerschnitte eindeutig von μB abhängen - impliziert dies, dass man eine beträchtliche Partonendichte und ein großes Raum-Zeit-QGP-Volumen zur Untersuchung der Dynamik in der partonischen Phase benötigt. Diese Bedingungen sind nur bei hohen Kollisionsenergien erfüllt, bei denen μB jedoch eher niedrig ist. Wenn andererseits die Kollisionsenergie verringert und somit μB erhöht wird, wird die hadronische Phase dominant und dementsprechend wird es zunehmend schwieriger, Signale aus der Partonendynamik auf der Basis von "Bulk"-Observablen zu extrahieren.
HADES (High Acceptance DiElectron Spectrometer), located at GSI, is a versatile detector for precise spectroscopy of e+ e- pairs and charged hadrons produced on a fixed target in a 1 to 3.5 AGeV kinetic beam energy region. The main experimental goal is to investigate properties of dense nuclear matter created in heavy ion collisions and learn about in-medium hadron properties.
In the HADES set-up 24 Mini Drift Chambers (MDC) allow for track reconstruction and determining the particle momentum by exploiting charged particle deflection in a magnetic field. In addition, the drift chambers contribute to particle identification by measuring the energy loss. The read-out concept foresees each sensing wire to be equipped with a preamplifier, analog pulse shaper and discriminator. In the current front-end electronics, the ASD-8 ASIC comprises the above modules. Due to limitations of the current on-board time to digital converters (TDC), especially regarding higher reaction rates expected at the future FAIR facility (HADES at SIS-100), the electronics need to be replaced by new board featuring multi-hit TDCs. Whereas ASD-8 chips cannot be procured anymore, a promising replacement candidate is the PASTTREC ASIC, developed by JU Krakow, which was tested w.r.t. suitability for MDC read-out in a variety of set-ups and, where possible, in direct comparison to ASD-8.
The timing precision, being the most crucial performance parameter of the joint system of detector and read-out electronics, was assessed in two different set-ups, i.e. a cosmic muon tracking set-up and a beam test at the COSY accelerator at Juelich using a minimum ionizing proton beam.
The beam test results were reproduced and can thus be quantitatively explained in a three dimensional GARFIELD simulation of a HADES MDC drift cell. In particular, the simulation is able to describe the characteristic dependence of the time precision on the track position within the cell.
A circuit simulation (SPICE) was used to closely model the time development of a raw drift chamber pulse, measured as a response to X-rays from a 55 Fe source. The insights gained from this model were used for attributing realistic charge values to the time over threshold values measured with the read-out ASICs in a charge calibration set-up. Furthermore, a high-level circuit simulation of the PASTTREC shaper is implemented to serve as a demonstration of the effect of the individual shaping and tail cancellation stages which are present in both ASICs.
The production cross section and the transverse momentum distribution of charged particles is measured in pp collisions at √s = 2.76 TeV, 5.02 TeV, 7 TeV and 13 TeV, as well as for Pb-Pb collision at √s_NN = 5.02 TeV and Xe-Xe at √s_NN = 5.44 TeV in ALICE at the LHC. The measurement is performed in the transverse momentum region of 0.15 < p_T < 50 GeV/c and in the pseudorapidity range of |η| < 0.8. The precision of the measurement has been substantially enhanced as a result of the improved corrections, by taking into account a more realistic particle composition in the MC simulations. As a result, the systematic uncertainties have been reduced by more than a factor two in all systems and energies.
The average transverse momentum <p_T> results show a faster-than-linear increase with the center-of-mass energy and follow a similar trend with respect to previous measurements. The analysis of the p_T spectra in multiplicity intervals show a weak center-of-mass energy dependence when they are compared to their respective inelastic (INEL) pp measurement. The average multiplicity as a function of the collision energy shows a quadratic trend, and the comparison with other ALICE multiplicity measurements exhibits a remarkable agreement, within uncertainties.
The transverse momentum spectra in pp collisions are compared to state-of-the-art MC simulations, EPOS LHC and PYTHIA 8 event generators; none of them is able to reproduce the distributions over the full p_T range.
The differential cross section in pp collisions is an essential observable for the study of the Quark Gluon Plasma (QGP) created in ultra-relativistic heavy-ion collisions. The absence of a medium formation in pp collisions serves as an essential baseline for studies of particle production and suppression due to parton energy-loss in the QGP. Since pp collisions at √s = 5.44 TeV were not measured by ALICE, the pp reference at this energy was constructed by using a power law interpolation between the s = 5.02 TeV and 7 TeV data. The pp results are compared to the particle production in Pb-Pb collisions at √s_NN = 5.02 TeV and Xe-Xe collisions at √s_NN = 5.44 TeV.
The nuclear modification factor R_AA for Pb-Pb and Xe-Xe collisions was calculated and a strong suppression of high-p_T particles is observed in central collisions. The R AA in different systems allows for a differential study of the parton energy loss in the QGP. The comparison of the R AA in multiplicity intervals between the two systems provide insights into the path length dependence of a parton that propagates in the medium.
This thesis is a summary of existing and upcoming publications, with a focus on high order methods in numerical relativity and general relativistic flows. The text is structed in five chapters. In the first three ones, the ADER-DG technique and its application to the Einstein-Euler equations is introduced. Novel formulations for both the Einstein equations in the 3+1 split as well as the general relativistic magnetohydrodynamics (GRMHD) had to be derived. The first order conformal and covariant Z4 formulation of Einstein equations (FO-CCZ4) is proposed and proven to be strongly hyperbolic. Together with the fluid equations of general relativistic magnetohydodynamics (GRMHD), a number of benchmark scenarios is presented to show both the correctness of the PDEs as well as the applicability of the numerical scheme.
As an application in astrophysics, a general-relativistic study of the treshold mass for a prompt-collapse of a binary neutron star merger with realistic nuclear equation of states has been carried out. A nonlinear universal relation between the treshold mass and the maximum compactness is found. Furthermore, by taking recent measurements of GW170817 into account, lower limits on the stellar radii for any mass can be given.
Furthermore, an (unpaired) work in quantum mechanical black hole engineering is presented. Higher dimensional extensions of generalized Heisenberg’s uncertainty principle (GUP) are studied. A number of new phenomenology is found, such as the existence of a conical singularity which mimics the effect of a gravitational monopole on short scale and that of a Schwarzschild black hole at a large scale, as well as oscillating Hawking temperatures which we call "lighthouse effect". All results are consistent with the self complete paradigm and a cold evaporation endpoint remnant.
Die Bestrahlung atmungsbewegter Tumoren stellt eine Herausforderung für die moderne Strahlentherapie dar. In der vorliegenden Arbeit werden zu Beginn die physikalischen, technischen und medizinischen Grundlagen vorgestellt, um dem Leser den Einstieg in die komplexe Thematik zu erleichtern. Des Weiteren werden verschiedene Techniken zur Bestrahlung atmungsbewegter Zielvolumina vorgestellt. Auch wird auf die Sicherheitssäume eingegangen, die notwendig sind, um Fehler in der Bestrahlungskette beim Festlegen des Planungszielvolumens für die Bestrahlung auszugleichen.
Im Rahmen dieser Arbeit wurde ein Konzept entwickelt, wodurch sich der Sicherheitssaum von bewegten Tumoren in der Radiochirurgie mit dem Tumor-Tracking-System des Cyberknifes noch weiter verkleinern lässt. Somit kann die sogenannte therapeutische Breite der Behandlung weiter vergrößert werden kann. Dafür wurden ein 4D-CT und ein Gating-System in den klinischen Betrieb aufgenommen. Die entwickelte Technik basiert auf den zehn individuellen Atemphasen des 4D-CTs und lässt eine Berücksichtigung bewegter Risikostrukturen bereits während der Bestrahlungsplanung zu. Diese Methode wurde mit aktuellen Bestrahlungstechniken mittels eines Vergleichs der Bestrahlungspläne anhand von zehn Patientenfällen verglichen. Zur Erstellung der Bestrahlungspläne kamen die Bestrahlungsplanungssysteme von Varian (Eclipse 13.5) und Accuray (Multiplan 4.6) zum Einsatz. Es wurden insbesondere die Bestrahlungsdosen an den Risikoorganen und die Volumina ausgewählter Isodosen betrachtet. Hier zeigte sich eine klare Abhängigkeit von der Belastung des gesunden Gewebes von der verwendeten Bestrahlungstechnik. Dies lässt die Schlussfolgerung zu, dass mit einer Reduzierung des Sicherheitssaums, welcher abhängig von der verwendeten Planungs- und Bestrahlungstechnik ist, eine Vergrößerung der therapeutischen Breite einhergeht. Zusätzlich bleibt bei einer geringen Belastung des umliegenden gesunden Gewebes die Möglichkeit für eine weitere Bestrahlung offen.
Anschließend wurden anhand von berechneten Testplänen Messungen an einem für diese Arbeit modifizierten Messphantom am Varian Clinac DHX und am Cyberknife VSI durchgeführt. Hier wurden die beim Planvergleich verwendeten Bestrahlungstechniken verwendet, um einen Abgleich von berechneter und tatsächlich applizierter Dosis zu erhalten. Das verwendete Messphantom simuliert die Atmung des Patienten und lässt gleichzeitig eine Verifikation der Dosisverteilung mit EBT3-Filmen sowie Messungen mit Ionisationskammern zu. Es zeigte sich, dass für die Techniken, welche aktiv die Atmung berücksichtigen (Synchrony am Cyberknife und Gating am Varian Clinac), selbst im Niedrigdosisbereich eine gute Übereinstimmung zwischen Messung und Berechnung der Dosisverteilung vorliegt. Sobald die Bewegung des Zielvolumens bereits bei der Bestrahlungsplanung berücksichtigt wird, steigt die Übereinstimmung weiter an. Für Techniken, welche die Atmung lediglich bei der Zielvolumen-Definition einbeziehen (ITV-Konzept), liegen sowohl die mit Ionisationskammern gemessenen Werte als auch die Übereinstimmung von berechneter und gemessener Dosisverteilung außerhalb des Toleranzbereichs.
Eine weitere Frage dieser Arbeit befasst sich mit der Treffsicherheit des Tumor-Tracking-Systems des Cyberknifes (Synchrony). Hier wurden Messungen mit dem XSightLung-Phantom und unterschiedlichen Sicherheitssäumen, welche die Bewegung des Tumors ausgleichen sollen, durchgeführt. Dies geschah sowohl mit dem für das Phantom vorgesehenen Würfel mit Einschüben für EBT3-Filme als auch mit einem Film-Sanchwich aus Flab-Material zur Untersuchung einer dreidimensionalen Dosisverteilung. Die Analyse der Filme ergab, dass es zumindest an einem Phantom mit einer einfachen kraniokaudalen Bewegung nicht nötig ist, die Bewegung des Zielvolumens durch einen asymmetrischen Sicherheitssaum in Bewegungsrichtung zu kompensieren um die Abdeckung des Zielvolumens mit der gewünschten Dosis zu gewährleisten.
Durch diese Arbeit konnten zusätzlich weitere wertvolle Erkenntnisse für den klinischen Alltag gewonnen werden: bei der Untersuchung der Bewegung von Tumoren in freier Atmung sowie bei maximaler Inspiration und Exspiration zeigte sich, dass zum Teil die Tumorbewegung in maximalen Atemlagen (3-Phasen-CT) deutlich von der freien Atmung abweicht. Dies lässt den Schluss zu, dass für eine Bestrahlung in freier Atmung ein 4D-CT die Tumorbewegung deutlich realistischer widerspiegelt als ein 3-Phasen-CT, zumal letzteres eine größere Dosisbelastung für den Patienten bedeutet.
Ebenfalls konnte anhand einer retrospektiven Untersuchung von Lungentumoren gezeigt werden, dass für die Berechnung von Bestrahlungsplänen für Tumoren in inhomogenem Gewebe der Ray-Tracing-Algorithmus die Dosis im Zielvolumen teilweise sehr stark überschätzt. Um eine realistische Dosisverteilung zu erhalten, sollte deshalb insbesondere bei Tumoren in der Lunge auf den Monte-Carlo-Algorithmus zurückgegriffen werden.
Mit immer komplexeren Experimenten erhöhen sich die Anforderungen an die Detektoren und diese Arbeit ist ein neuer Beitrag für eine weiterentwickelte technologische Lösung. In der vorliegenden Dissertation wurde eine nichtinvasive optische Strahldiagnose für intensive Ionenstrahlen in starken Magnetfeldern entwickelt. Das optische System besteht aus miniaturisierten Einplatinen CMOS-Kameras. Sowohl die hardwareseitige Entwicklung als auch die softwareseitige Implementierung der Algorithmen zur Kamerakalibrierung, Netzwerksteuerung und Strahlrekonstruktion wurden in dieser Arbeit entwickelt. Die Leistungsstärke dieses neuartigen Diagnosesystems wurde dann experimentell an einem Teststand demonstriert. Dabei wurde das optische System ins Vakuumstrahlrohr eingebettet. Ein Wasserstoffionenstrahl mit einer Energie von 7keV bis 10keV und einem Strahlstrom bis 1mA wurde in einer Stickstoffatmosphäre bis 1E-5 mbar untersucht. Dabei wurde der Ionenstrahl entlang des Strahlrohres des Toroidsegmentmagnetes mit einer Bogenlänge von 680mm mit einem xy-Kamerasystem beobachtet.
Der Strahlschwerpunkt und die Breite des Strahlprofils wurden im Ortsraum rekonstruiert. Die analytisch berechnete und in anderen Arbeiten simulierte Gyrationsbewegung sowie der RxB-Drift des Strahlschwerpunktes konnte experimentell bestätigt werden.
With the discovery of light beyond human visibility, scientists strove to extend the range of observation to invisible parts of the light’s spectrum. Realising that light of all frequencies is part the same physical phenomenon, brought a leap in understanding about electromagnetic waves. With the development of more advanced technology, detectors with higher sensitivity for adjacent frequencies to the visible were built. From this, with each new observable wavelength, more insight into otherwise invisible processes and phenomenons were observed. Hand in hand with this went the enhancement of the output power of corresponding sources. This has lead to higher sensitivity setups throughout the spectrum, leading to observations which have given a deeper understanding in various fields of science. Nowadays, detectors and emitters in many different regions of the invisible electro magnetic spectrum have found their way in our every day life. Innovations in technology has lead to practical applications such as X-rays in medicine, motion sensors and remote controls using infrared light, distance sensors and data transmission using radar and radio devices. The frequency regions above infrared are optically generated and below radar can be produced using electric methods. There is no straight line that separates these frequencies. There rather is a whole intermediate region known as the terahertz (THz) regime. Due to the lack of sensitive detectors and efficient sources, the THz frequency region has not been exploited for application use on a widespread basis so far. It combines properties from the surrounding frequency ranges which make it an ideal spectrum for various applications. Consequently, THz radiation and THz imaging are active fields of research.
The work presented in this thesis consists of the development and testing of novel THz imaging concepts, which uses a THz antenna coupled field effect transistor (TeraFET) detector. Two detection principles are applied using two different optical setups. The first uses a pulsed optical parametric oscillator (OPO) THz source where the optical output power is detected. The source relies on a nonlinear effect of a lithium niobate crystal to generate tunable THz pulses from a Q-switched pump laser. The THz signal is detected and amplified by a double stage operational amplifier for monitoring the real time 20 ns pulses on an oscilloscope where a signal to noise ratio (SNR) of ⇠ 25 at a frequency range from 0.75 to 1.1 THz is reached. Imaging of the area of interest with a resolution of 1.2 mm is achieved through raster scanning of the THz pulses. Also spectroscopy with a frequency resolution of ⇠ 50 GHz is demonstrated using a para-aminobenzoic acid sample. The second setup utilises two synchronised electronic multiplier chain sources where their output is mixed on the detector. To form a heterodyne detection setup, the intermediate frequency is fed to a lock-in amplifier which then amplifies the so called beat signal from the TeraFET detector. One source is fixed relative to the detector even through scanning to ensure a stable signal. This detection method allows for amplitude and phase detection for every scanning position, making numerical light field propagation and object reconstruction possible. Numerical focussing is a key feature achieving a lateral resolution of the input transmittance of ⇡ 2 mm.
After the introduction, the second chapter describes the setup, measurement results and challenges which arise using a TeraFET together with the pulsed THz source “Firefly-THz”. In the description of the setup, special attention is given to the shielding of the detector and the electronics. General findings discuss first the overall performance and later spectroscopy and imaging as application examples. Another subsection continues with potential noise sources before the chapter is concluded. Chapter three expands on the topic of Fourier optics from a theoretical point of view. First, parts of the theory of the Fourier Transform (FT) are set out for the reader and how the Fast Fourier Transform (FFT) results from the Discrete Fourier Transform (DFT). This approach is used for theoretical considerations and the implementation of a Fourier optic script that allows for numerical investigations on electro magnetic field propagation through an optical system. The boundary conditions are chosen to be practical relevant to make predictions on measurements presented in chapter four. The following fourth chapter describes the realisation of a heterodyne THz detection setup. Before the measurement results are presented, the setup and its electric configuration are shown. The results come close to the analytical predictions so that the same algorithm which propagates the field from an object to the Fourier plane is used to propagate the measured field back to the object. The influence of phase noise on the measurement results are discussed before simulation and measurement is compared. The last chapter in this thesis concludes on the findings in the pulsed THz detection and the heterodyne THz Fourier imaging and gives an outlook for both configurations.
Die vorliegende Dissertation befasst sich mit der Entwicklung und Erforschung eines konzeptionell neuartigen Injektionssystems zum Transport von Ionenstrahlen in toroidale Magnetfeldstrukturen. Die Forschungsarbeit ist dabei Teil des Figure-8 Speicherringprojekts (F8SR) des IAP, bei welchem es um die Erforschung der Physik und die Entwicklung eines niederenergetischen, supraleitenden, magnetostatischen Figure-8 Hochstromspeicherrings geht. Dieser neuartige Speicherring ermöglicht aufgrund des Einsatzes von fokussierenden solenoidalen und toroidalen Magnetfeldern das Speichern von Strahlströmen von bis zu einigen Ampere. Diese Arbeit baut auf früheren Forschungsarbeiten zu diesem Themenfeld auf, in welchen die Grundlagen und Ausgangsparameter für die experimentelle Untersuchung der Injektion gelegt und mit dem Aufbau des Injektionsexperiments begonnen wurde.
In dieser Dissertation wird den Fragen nachgegangen, ob ein magnetisches Konzept des Injektionssystems mittels eines „Scaled-Down“-Experiments experimentell umsetzbar ist und ob mit diesem die Injektion von Ionenstrahlen in toroidale Magnetfeldstrukturen realisiert werden kann. Ziel ist es dabei, ein Injektionssystem aufzubauen, durch welches sowohl ein seitlich injizierter Injektionsstrahl, welcher den in den Speicherring zu injizierenden Strahl darstellt, als auch ein gleichzeitig durch die toroidalen Magnetfelder driftender Ringstrahl, welcher den im Speicherring zirkulierenden Strahl darstellt, ohne Verluste transportiert werden können. Das Injektionssystem besteht dabei aus drei normalleitenden Magneten, wobei es sich um zwei baugleiche 30 Grad Toroide sowie einen Solenoid handelt. Die Toroide bilden den Transportkanal für den Ringstrahl, während der Injektionssolenoid senkrecht zwischen den beiden Toroiden endet und den Injektionskanal für den Injektionsstrahl darstellt.
Zunächst wurde das Injektionssystem mittels Strahltransportsimulationen untersucht und aufbauend auf den Ergebnissen die benötigen Vakuumkomponenten sowie der Injektionsmagnet ausgelegt, entwickelt und umgesetzt. Anschließend wurde mit dem fertigstellten Injektionsexperiment der Transport von zwei Ionenstrahlen durch das Injektionssystem experimentell erforscht. Dabei wurden die Strahlpfade mit einem in Entwicklung befindlichen Kameradetektorsystem aus verschiedenen Perspektiven aufgenommen und das Strahlverhalten in Abhängigkeit von unterschiedlichen Parametern phänomenologisch analysiert und diskutiert, mit den Ergebnissen der Simulationen verglichen sowie theoretisch bzgl. der RxB Drift und eines Gedankenmodells eingeordnet. Die technische Umsetzung, Inbetriebnahme und Durchführung verschiedener Vorabexperimente bzgl. weiterer Komponenten des Injektionsexperiments (bspw. Ionenquellen und Filterkanäle) ist ebenfalls Bestandteil dieser Arbeit.
Bei den experimentellen Untersuchungen mit Wasserstoff- und Heliumionenstrahlen konnte beobachtet werden, wie der Injektionsstrahl in den zweiten Toroid driftet und somit erfolgreich injiziert wird. Des Weiteren wurde eine Heliummessung durchgeführt, bei der sowohl der Injektionsstrahl als auch der Ringstrahl erfolgreich durch das Injektionssystem transportiert werden konnten. Auch die Auswirkungen des Injektionsmagneten auf den Ringstrahl konnten experimentell untersucht werden. Die verschiedenen Messungen wurden mittels des Gedankenmodells diskutiert und mit den Ergebnissen der Simulationen sowie untereinander verglichen.
Das abschließende Ergebnis dieser Arbeit ist, dass durch den Einsatz von solenoidalen und toroidalen Magnetfeldern der Injektionsstrahl vom Injektionsmagneten in den zweiten Toroid transportiert und dieser somit in die gekoppelte magnetische Konfiguration der Toroide eingelenkt werden kann. Der gleichzeitige verlustfreie Transport eines Ringstahls durch das Injektionssystem konnte dabei ebenfalls realisiert werden. Des Weiteren stimmen die Ergebnisse der Simulationen und Experimente sowie die theoretischen Überlegungen überein.
Das neuartige Injektionskonzept, welches als Schlüsselkomponente für die Umsetzung des Figure-8 Hochstromspeicherrings benötigt wird, wurde somit mittels Theorie, Simulation und Experiment überprüft und die Funktionalität bestätigt.
Zukünftige Forschungsfragen für welche der Figure-8 Hochstromspeicherring verwendet werden könnte, bspw. aus den Bereichen der experimentellen Astrophysik oder Fusionsforschung, wurden abschließend diskutiert.
Defossiliation of the energy system is crucial in the face of the impending risks of climate change. Electricity generation by burning fossil fuels is being displaced by renewable energy sources like hydro, wind and solar, driven by support schemes and falling costs from technological advances as well as manufacturing scale effects. The unavoidable shift from flexibly dispatchable generation to weather-dependent spatio-temporally varying generators transforms the generation and distribution of electricity into highly interdependent complex systems in multiple dimensions and disciplines:
In time, different scales, stretching from intra-day, diurnal, synoptic to seasonal oscillations of the weather interact with years and decades of planning and construction of capacity. In space, long-range correlations and local variations of weather systems as well as local bottlenecks in transmission networks affect solutions. The investment decisions about technological mix and spatial distribution of capacity follow economic principles, within restrictions which adapt in social feedback loops to public opinion and lobbyist influences.
In this work, a family of self-consistent models is developed which map physical steady-state operation, capacity investments and exogeneous restrictions of a European electricity system, in higher simultaneous spatial and temporal detail as well as scope than has previously been computationally tractable. Increasing the spatial detail of the renewable resources and co-optimizing the expansion of only a few transmission lines, reveals solutions to serve the European electricity demand at about today’s electricity cost with only 5% of its carbon-dioxide emissions; and importantly their electricity mix differs from the findings at low spatial resolution.
As important intermediate steps,
• new algorithms for the convex optimization of electricity system infrastructure are derived from graph-theoretic decompositions of network flows. Only these enable the investigation of model detail beyond previous computational limitations.
• a comprehensive European electricity network model down to individual substations at the transmission voltage levels is built by combining and completing data from freely available sources.
• a network reduction technique is developed to approximate the detailed model at a sequence of spatial resolutions to investigate the role of spatial scale, and identify a level of spatial resolution which captures all relevant detail, but is still computationally tractable.
• a method to trace the flow of power through the network, which is related to a vector diffusion process on a directed flow graph embedded in a network, is used to analyse the resulting technology mix and its interactions with the power network
The open-source nature of the model and restriction to freely available data encourages an accessible and transparent discussion about the future European electricity system, primarily based on renewable wind and solar resources.
In the course of this thesis we discuss a certain kind of supersolid, the lattice-supersolid, which can be realized using quantum gases in an optical lattice trap. The lattice-supersolid, which simultaneously possesses off-diagonal and diagonal long-range order in its density matrix and also breaks the discrete translational symmetry of an underlying lattice, is induced by self-ordering of the gas due to strong long-range van der Waals interactions. In the considered scenario, the interactions are facilitated by the excitation of atomic Rydberg states, which exhibit enhanced van der Waals forces.
In the first part of this thesis (chapters 1-3), we review the relevant basics of quantum gases, Rydberg physics and introduce the extended Bose-Hubbard model. We start with the relevant methods and devices of the vast toolbox available in common quantum gas experiments, as well as consider the main concepts behind superfluidity and supersolidity. This is followed by an introduction of some basic concepts of Rydberg atoms in quantum many-body systems, with a focus on the facilitation of long-range interactions and the implementation in a theoretical model. Thereafter a brief introduction is given, on the realization of the Bose-Hubbard model in optical lattice systems and its extension to include Rydberg states, which concludes the introductory part of this thesis.
In the following part (chapters 4-6), we introduce the theoretical tools used to derive the results presented in the final part. First, an introduction to a real-space extension of bosonic dynamical mean-field theory (RB-DMFT) for bosonic systems with long-range interactions in the Hartree approximation is given. This method is based on the non-perturbative self-consistent evaluation of the lattice Green’s function, which also incorporates the effect of nearest neighbor correlations due to the non-condensed particles. Then we focus on a quasiparticle expansion of the Bose-Hubbard model, which has its foundation in linearized fluctuations of a static mean-field ground-state, allowing for the prediction of a vast range of experimentally relevant observables. Lastly, we introduce an efficient truncation scheme for the local bosonic Fock-basis, which allows for the simulation of phases with high condensate density at a vastly reduced computational effort.
In the final part (chapters 7 and 8), we discuss the application of both methods to itinerant bosonic gases in two-dimensional optical lattices, in order to predict the equilibrium ground-state phases, as well as the signatures of supersolidity and its formation in spectral functions and the dynamic and static structure factor. Specifically, we focus on two limiting cases. Firstly, we consider a two-component gas, as realized by two hyperfine ground states, for example, of rubidium-87, where one component is off-resonantly excited to a Rydberg state, which generates a soft-core shaped interaction potential. Secondly, we discuss the opposing limit, using near-resonant excitations
of Rydberg states, where the interacting component now directly corresponds to the Rydberg state, which interacts via a van der Waals potential. In both cases we discuss the rich variety of supersolid phases, which are found for a wide range of parameters. We also discuss how some of these phases can be realized in experiment.
In the subsequent appendices (A to D) we discuss some methodological details. Most notably, we consider the possible Fock-extension of the Hartree approximation (appendix A), introduced in the RB-DMFT treatment of the extended Bose-Hubbard model.
This thesis presents the first measurement of the proton capture reaction on the isotope 124Xe performed in inverse kinematics. The experiment was carried out in June 2016 at the Experimental Storage Ring (ESR) at the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany.
124Xe is one of about 35 p-nuclei that cannot be produced via neutron-induced nucleo- synthesis as the vast majority of heavy elements. Its production and destruction provide important information about the nucleosynthesis of the p-nuclei. Measuring the 124Xe(p,g)125Cs reaction also gives strong constraints for its reverse 125Cs(g,p)124Xe reaction.
Fully stripped 124Xe ions repeatedly passed a H2 gas jet target at five different energies between 5.5 MeV/u and 8 MeV/u. An electron cooler compensated for the energy loss in the target and reduced the beam momentum spread. The reaction product 125Cs55+ has a smaller magnetic rigidity than 124Xe54+. Therefore 125Cs55+ was deflected towards smaller radii in the first dipole after the target area and thereby separated from 124Xe54+. It was detected with a position-sensitive Double-Sided Silicon Strip Detector (DSSSD). The novelty of this experiment was the installation of the DSSSD inside the ultra-high vacuum of the storage ring using a newly designed manipulator.
Three High-Purity Germanium X-ray detectors were used to measure the X-rays following the Radiative Electron Capture (REC) events into 124Xe53+. The REC cross sections are well-known and were used to determine the luminosity.
The 124Xe(p,g)125Cs cross sections at ion beam energies between 5.5 MeV/u and 8 MeV/u were determined relatively to the K-REC cross sections and finally compared to the theoretically predicted cross sections. While theoretical predictions of the TENDL database are lower than the measured ones by a factor of up to seven, the NON-SMOKER data are higher by a factor of up to two, except of the cross section at 7 MeV/u, where NON-SMOKER data are slightly lower than the experimental value.
For the first time, a proton capture cross section could be measured in inverse kinematics close to the astrophysically relevant Gamow window. This allows the direct determination of the (p,g) cross section of isotopes with half-lives down to several minutes, which is not possible with any other technique.
In this thesis we work on the theoretical description of relativistic heavy-ion collisions, focussing on electromagnetic probes. We present mainly four topics: electric conductivity and diffusion properties of the hot plasma and hadronic matter, response of the quark-gluon plasma to external magnetic fields, direct photon production in the quark-gluon plasma and a study about initial and final state effects in small systems. The latter topic aims, i.a., at a better understanding of the initial state, which is crucial for electromagnetic probes. In all research areas we make use of the Boltzmann transport equation, whereby the presented methods provide analytical and numerical solutions. We pay particular attention to the construction of complete leading order photon production processes in numerical transport simulations of the quark-gluon plasma.
To begin with, our findings are the complete conserved charge diffusion matrix and electric conductivity. Those properties are important ingredients, e.g., for future simulations of baryon rich collisions. Next, we find that the influence of external magnetic fields to the QGP dynamics is not quantifiable in observables.
We present results for a variety of direct photon observables and we can partly explain experimental data. We emphasize the importance of the chemical composition and non-equilibrium nature of the medium to the direct photon puzzle. Lastly, we observe the interesting dynamic behavior of azimuthal correlations in small systems and identify signatures of the initial state in final observables. This will also be of interest for more precise simulations of electromagnetic probes and allows for various future studies.
Die vorliegende Arbeit präsentiert die wissenschaftlichen Erkenntnisse, welche im Rahmen dreier verschiedener Messreihen gewonnen wurden. Kernthema ist in allen Fällen die Ionisation von molekularem Wasserstoff mit Photonen.
Im Rahmen der Messung sollte eine 2014 veröffentlichte Vorhersage der theoretischen Physiker Vladislav V. Serov und Anatoli S. Kheifets im Experiment überprüft werden. Ihren Berechnungen zufolge kann ein sich langsam vom Wasserstoff Molekülion entfernendes Photoelektron durch sein elektrisches Feld das Mutterion polarisieren und dafür sorgen, dass beim anschließenden Aufbruch in ein Proton und ein Wasserstoffatom eine asymmetrische Emissionswinkelverteilung zu beobachten ist [SK14]. Diese Vorhersage konnte mit den Ergebnissen der hier vorgestellten Messung zweifelsfrei untermauert werden. Für drei verschiedene Photonenenergien, welche im relevanten Reaktionskanal Photoelektronenenergien von 1, 2 und 3 eV entsprechen, wurden die prognostizierten Symmetrien in den Messdaten herauspräpariert. Es zeigte sich, dass diese sowohl in qualitativer wie auch in quantitativer Hinsicht gut bis sehr gut mit den Vorhersagen übereinstimmen.
Im zweiten Teil dieser Arbeit wurde erneut die Dissoziationsreaktion, allerdings bei deutlich höheren Photonenenergien, untersucht. Ziel war es, den in Zusammenarbeit mit den Physikern um Fernando Martin gelungenen theoretischen Nachweis der Möglichkeit einer direkten Abbildung von elektronischen Wellenfunktionen auch im Experiment zu vollziehen. Der überwiegende Teil aller Veröffentlichungen im Vorfeld dieser Messung fokussierte sich bei den Untersuchungen der Wellenfunktion entweder auf die rein elektronischen Korrelationen - so zum Beispiel in Experimenten zur Ein-Photon-Doppelionisation, wo Korrelationen zwischen beiden beteiligten Elektronen den Prozess überhaupt erst möglich machen - oder aber auf den Einfluss, welchen das Molekülpotential auf das emittierte Elektron ausübt. Die wenigen Arbeiten, die sich bis heute an einer unmittelbaren Abbildung elektronischer Wellenfunktionen versuchten, gingen meist den im Vergleich zu dieser Arbeit umgekehrten Weg: Man untersuchte hier das Licht höherer Harmonischer, wie sie bei der lasergetriebenen Ionisation und anschließenden Rekombination eines Photoelektrons mit seinem Mutterion entstehen.
In dieser Arbeit wurde ein Ansatz präsentiert, der zwei überaus gängige und verbreitete Messtechniken geschickt kombiniert - Während das Photoelektron direkt nachgewiesen und seine wesentlichen Eigenschaften abgefragt werden, kann der quantenmechanische Zustand des zweiten, gebunden verbleibenden Elektrons über einen koinzident dazu geführten Nachweis des ionischen Reaktionsfragments bestimmt werden. Dieser Vorgang stützt sich wesentlich auf Berechnungen der Gruppe um Fernando Martín, welche eine Quantifizierung der Beiträge einzelner Zustande zum gesamten Wechselwirkungsquerschnitt dieser Reaktion erlauben. Diese unterscheiden sich je nach Energie der Fragmente signifikant, so dass über eine Selektion des untersuchten KER-Intervalls Kenntnis vom elektronischen Zustand des H2 +-Ions nach der Photoemission erlangt werden kann. Die experimentellen Daten unterstützen die Theorie von Martin et al. nicht nur mit verblüffend guter Übereinstimmung, die gemessenen Emissionswinkelverteilungen stehen darüber hinaus auch in sehr gutem Einklang mit ihren theoretisch berechneten Gegenstücken. Die Ergebnisse wurden zwischenzeitlich in der renommierten Fachzeitschrift Nature Communications veröffentlicht [WBM+17].
Die dritte Messreihe innerhalb dieser Arbeit beschäftigt sich mit der Photodoppelionisation von Wasserstoff. Im Rahmen des selben Experiments wie die weiter vorn beschriebene Dissoziationsmessung bei 400 eV Photonenenergie aufgenommen, belegen die Ergebnisse auf wunderbar anschauliche Art und Weise, dass die Natur in unserer Umgebung voller Prozesse ist, die ursprünglich als rein quantenmechanische Laborkonstrukte angesehen wurden. Es konnte zweifelsfrei gezeigt werden, dass die beiden Elektronen, die bei der Photodoppelionisation freigesetzt werden, als ein Quasiteilchen aufgefasst werden können. Sie befinden sich in einem verschränkten Zweiteilchenzustand, und nur eine koinzidente Messung beider Elektronen vermag es, Interferenzeffekte in ihren Impulsverteilungen sichtbar zu machen - betrachtet man beide hingegen individuell, so treten keinerlei derartige Phänomene auf. Es gelang dabei zudem, eine beispielhafte Übereinstimmung zwischen den gemessenen Daten und einer theoretischen Berechnung der Kollegen um Fernando Martín zu erreichen.
Terahertz (THz) physics are an emerging field of research dealing with electromagnetic radiation in the far-infrared to microwave region. The development of innovative technologies for the generation and detection of THz radiation has only in the recent past led to a tremendous rise of both fundamental research as well as investigation of possible fields of application for THz radiation. The most prominent reason has long been the scarce accessibility of the THz region of the electromagnetic spectrum - commonly loosely located between 0.1 and 30 THz - to broad research, and it was mostly limited to astronomy and high energy physics facilities. Over the recent years, numerous novel concepts on both the source and detector side have been proposed and successfully implemented to overcome this so-called THz gap. New technology has become available and paved the way for wide-spread experimental laboratory work and accompanying theoretical investigations. First application studies have emerged and in some cases even commercial development of the field of THz physics is on the rise. Despite these enormous progresses, a continuing demand for more efficient THz detectors still impels current technological research. Relatively low source powers are often a major limiting factor and the request for new detection concepts, their understanding and implementation, as well as the optimization on a device basis has been and still remains in place. One of these concepts is the use of field-effect transistors (FETs) high above their conventional cut-off frequencies as electronic THz detectors. The concept has been proposed in a number of theoretical publications by M. Dyakonov and M. Shur in the early 1990's, who pioneered to show that under certain boundary conditions, non-linear collective excitations of the charge carrier system of a two-dimensional electron gas (2DEG) by incident THz radiation can exhibit rectifying behaviour - a detection principle, which has become known as plasma wave or plasmonic mixing. Up until this day, the concept has been successfully implemented in many device realizations - most advanced in established silicon CMOS technology - and stands on the edge of becoming commercially available on a large scale. The main direction of the work presented in this thesis was the modeling and experimental characterization of antenna-coupled FETs for THz detection - termed TeraFETs in this and the author's previous works - which have been implemented in different material systems. The materials presented in this thesis are AlGaN/GaN HEMTs and graphene FETs. In a number of scientific collaborations, TeraFETs were designed based on a hydrodynamic transport model, fabricated in the respective materials, and characterized mainly in the lower THz frequency region from 0.2 to 1.2 THz. The theoretical description of the plasma wave mixing mechanism in TeraFETs, as initiated by Dyakonov and Shur, was based on a fluid-dynamic transport model for charge carriers in the transistor channel. The THz radiation induces propagating charge density oscillations (plasma waves) in the 2DEG, which via non-linear self-mixing cause rectification of the incident THz signals. Over the course of this work, it became evident in the on-going detector characterization experiments that this original theoretical model of the detection process widely applied in the respective literature does not suffice to describe some of the experimental findings in TeraFET detection signals. Thorough measurements showed signal contributions, which are identified in this work to be of thermoelectric origin arising from an inherent asymmetric local heating of charge carriers in the devices. Depending on the material, these contributions constituted a mere side effect to plasmonic detection (AlGaN/GaN) or even reached a comparable magnitude (graphene FETs). To include these effects in the detector model, the original reduced fluid-dynamic description was extended to a hydrodynamic transport model. The model yields at the current stage a reasonable qualitative agreement to the measured THz detection signals. This thesis presents the formulation of a hydrodynamic charge carrier transport model and its specific implementation in a circuit simulation tool. A second modeling aspect is that the transport equations cover only the intrinsic plasmonic detection process in the active gated part of the TeraFET's transistor channel. In order to model and simulate the behavior of real devices, extrinsic detector parts such as ungated channel regions, parasitic resistances and capacitances, integrated antenna impedance, and others must be considered. The implemented detector model allows to simulate THz detection in real devices with the above influences included. Besides presentation of the detector model, experimental THz characterization of the fabricated TeraFETs is presented in this work. Careful device design yielded record detection performance for detectors in both investigated materials. The respective results are shown and the experimental observations of the thermoelectric effect in TeraFETs are compared to modeling results. It is the goal of this work to provide a framework for further theoretical and experimental studies of the plasmonic and thermoelectric effect in TeraFETs, which could eventually lead to a new type of THz detectors particularly exploiting the thermoelectric effect to enhance the sensitivity of today's plasmonic TeraFETs.