Refine
Year of publication
Document Type
- Doctoral Thesis (596) (remove)
Has Fulltext
- yes (596)
Is part of the Bibliography
- no (596)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (596) (remove)
Magnetische Quadrupole und Solenoide sind ein elementarer Bestandteil einer Beschleunigeranlage und begrenzen die transversale Ausdehnung eines Teilchenstrahls durch eine Reflexion der Teilchen in Richtung der Beschleunigerachse. Die konventionelle Bauweise als Elektromagnet besteht aus einem Eisenjoch welches mit Spulen umwickelt ist. In dieser Arbeit werden diese Magnetstrukturen auf Basis von Permanentmagneten designt und hinsichtlich ihrer Qualität zum Strahltransport optimiert, sowie Feldmessungen an permanentmagnetischen Quadrupolen durchgeführt. Diese wurden mit 3D-gedruckten Halterungen aus Kunststoff gefertigt, was eine Vielzahl von Formvariationen ermöglicht. Darauf aufbauend wurde ein im Vakuum befindlicher Aufbau entwickelt, mit welchem die Strahlenvelope im inneren eines permanentmagnetischen Quadrupol Tripletts diagnostiziert werden kann. Dies greift auf ein am Institut für angewandte Physik entwickeltes System zur nicht-invasiven Strahldiagnose mithilfe von Raspberry Pi Einplatinencomputern und Kameras in starken Magnetfeldern zurück.
Die in dieser Arbeit vorgestellte Konfiguration eines PMQ’s ist eine Weiterentwicklung des am CERN im Linac4, einem Alvarez-Driftröhrenbeschleuniger zur Beschleunigung von H– , verwendeten Designs. Bei diesem sind je acht quaderförmige Permanentmagnete aus Samarium Cobalt (SmCo) in die Driftröhren des Beschleunigers integriert.
Darauf aufbauend wurden die geometrischen Designparameter hinsichtlich ihres Einflusses auf die Qualität des Magnetfelds untersucht. In einem magnetischen Quadrupol zur Strahlfokussierung wird dies durch einen linearen Anstieg des Magnetfeldes von Quadrupolachse zu Polflächen charakterisiert. Das Design wurde im Zuge dessen zur Verwendung von industriellen Standardgeometrien von Quadermagneten und der Erhöhung der magnetischen Flussdichte erweitert. Dazu wurde untersucht wie sich das Hinzufügen von zusätzlichen Magneten auswirkt und ob eine bessere Feldqualität durch andere Magnetformen erreicht wird.
Die Kombination mehrerer PMQ in geringem Abstand (<10 mm) führt abhängig von der Geometrie der PMQ-Singlets zu einer erheblichen Verschlechterung der Feldlinearität, was eine Erhöhung des besetzten Phasenraumvolumens der Teilchen nach sich zieht.
Am Beispiel von PMQ-Tripletts werden die zu beachtenden Designparameter analysiert und Lösungsansätze vorgestellt. Die auftretenden Effekte werden anhand von Strahldynamiksimulation veranschaulicht. Für eine Anwendung der vorgestellten Designs wurde eine Magnethülle mit einer Wabenstruktur zur Aufnahme der Einzelmagnete entwickelt. Diese besteht aus zwei Halbschalen, welche jeweils den Kompletteinschluss aller Magnete garantiert und eine einfache Montage um ein Strahlrohr ermöglicht. Diese wurden in der Institutswerkstatt aus Kunststoff via 3D-Druck gefertigt. Aufgrund der höheren erreichbaren Magnetisierung wurden Neodym-Eisen-Bor-Magnete (Nd2F14B, Br =1,36 T) für den Bau der entwickelten Strukturen verwendet. Für eine Magnetfeldmessung zur Bestätigung der magnetostatischen Simulationen und einer Bewertung der Druckqualität wurde eine motorisierte xyz-Stage zur Bewegung einer Hallsonde aufgebaut. Die Messungen zeigen eine gute Zentrierung des Magnetfeldes, sodass PMQ mit einer Kunststoffhalterung eine schnelle und billige Möglichkeit sind, kurzfristig eine Quadrupol-Konfiguration aufzubauen. Die Kosten belaufen sich für einen einzelnen PMQ je nach Länge auf 50€ bis 100€.
Basierend auf der PMQ-Struktur wurde ein PMQ-Triplett in ein Vakuum versetzt und mit Raspberry Pi Kameras im Zwischenraum der Singlets ausgestattet. Dies ermöglichte die Aufnahme der Strahlenvelope innerhalb des Tripletts anhand der durch einen Heliumstrahl induzierten Fluoreszenz und erste Erkenntnisse für notwendige Weiterentwicklungen wurden gesammelt. Auf den genauen technischen Aufbau wird im abschließenden Kapitel der Arbeit detailliert eingegangen.
In der einfachsten Form wird ein PM-Solenoid anhand eines einzelnen axial magnetisierten Hohlzylinders realisiert und erzeugt näherungsweise die Feldverteilung einer Zylinderspule. Durch die radialen Magnetfeldkomponenten an den Rändern des Solenoiden erhalten Teilchen eine tangentiale Geschwindigkeitskomponente und führen eine Gyrationsbewegung entlang der Solenoidachse aus. Diese reduziert den Strahlradius und die Teilchen behalten eine Geschwindigkeitskomponente, welche zur Solenoidachse zeigt. Für eine Maximierung dieser Fokussierung muss das Magnetfeld auf die Zylinderachse konzentriert werden. Insbesondere bei einer Verlängerung des Hohlzylinders wird die Kopplung der Polflächen über das Innenvolumen abgeschwächt. Aufgrund dessen wurde ein Design bestehend aus drei Hohlzylindersegmenten entwickelt. Dieses setzt sich aus zwei radial und einem axial magnetisierten Hohlzylinder zusammen und erhöht die mittlere magnetische Flussdichte für ausgewählte Geometrien um einen Faktor zwei im Vergleich zu einem einzelnen Hohlzylinder gleicher Geometrie. Dies ist gleichzusetzen mit einer Vervierfachung der Fokussierstärke, welche quadratisch mit der mittleren magnetischen Flussdichte skaliert. Die Strahldynamischen Konsequenzen werden anhand von Simulationen mit generierten Magnetfeldverteilungen erläutert. Für eine kostengünstige Bauweise wurde eine Design basierend auf quaderförmigen Magneten entwickelt.
Es wurde das Leitfähigkeitsverhalten von reinem, lufthaltigem Wasser bei kontinuierlicher und impulsgetasteter Röntgenbestrahlung (60 kV8) untersucht. Hierbei ergaben sich zwei einander überlagerte Effekte: 1. Ein der Röntgen-Dosisleistung proportionaler irreversibler Leitfähigkeitsanstieg, der vermutlich auf eine Strahlenreaktion des gelösten CO2 zurückzuführen ist, 2. eine reversible Leitfähigkeitserhöhung während der Bestrahlung, die sich mit der Entstehung einer Ionenart mit einer mittleren Lebensdauer von ca. 0,15 sec erklären läßt. Es wird angenommen, daß es sich dabei um Radikalionen O2⊖ handelt, welche durch die Reaktion der als Strahlungsprodukt entstehenden Η-Radikale mit dem gelösten Sauerstoff gebildet werden. Ein möglicher chemischer Reaktionsmechanismus wird angegeben, der zu befriedigender quantitativer Übereinstimmung der Versuchsergebnisse mit Ausbeutewerten und Reaktionskonstanten aus der Literatur führt.
Neutron stars are unique laboratories for the investigation of the high density properties of bulk matter. In this work, the astrophysical constraints for a phase transition from hadronic matter to deconfined quark matter are examined thoroughly. A scheme for relating known astrophysical observables such as mass, radius and tidal deformability to the parameter space of such a transition is devised and applied to the set of data currently available.
In order to span a wide parameter space, a highly parameterizable relativistic mean field equation in compliance with chiral effective field theory results is used, where the stiffness of the equation of state can be varied via the effective mass at saturation density. The phase transitions are modelled using a Maxwell construction and assumed to be of first order, with a constant speed of sound quark matter model. The resulting equations of state are analyzed and divided into four categories, which can be used to constrain the parameter space that allows phase transition. It is highlighted, that a subset of this parameter space would even be detectable without the need of higher precision measurements. A phase transition at high densities is shown to be particularly promising in this regard. Finally, the groundwork is laid to apply the equation of state used in this work for supernova or merger simulations, by extending it to non-zero temperatures.
In order to understand the origin of the elements in the universe, one must understand the nuclear reactions by which atomic nuclei are transformed. There are many different astrophysical environments that fulfill the conditions of different nucleosynthesis processes. Even though great progress has been made in recent decades in understanding the origin of the elements in the universe, some questions remain unanswered. In order to understand the processes, it is necessary to measure cross sections of the involved reactions and constrain theoretical model predictions. A variety of methods have been developed to measure nuclear reaction cross sections relevant for nuclear astrophysics. In this thesis, two different experiments and their results, both using the well-established activation method, are presented.
A measurement of the proton capture cross section on the p-nuclide 96Ru was performed at the Institute of Structure and Nuclear Astrophysics ISNAP - Notre Dame, USA. The main goal of this experiment was to compare the results with those obtained by Mei et al. in a pioneering experiment using the method of inverse kinematics at the GSI Helmholtzzentrum für Schwerionenforschung GmbH - Darmstadt, Germany. Therefore, the activations were taken out at the same center of mass energies of 9 MeV, 10 MeV and 11 MeV. Another activation was taken out at an energy of 3.2 MeV to compare the result to a measurement of Bork et al. who also used the activation method. While the results at 3.2 MeV agree quite well with those of Bork et al., the results at higher energies show significantly smaller cross sections than those measured by Mei et al.. Experimental details, the data analysis and sources of uncertainties are discussed.
The second part of this thesis describes a neutron capture cross section experiment. At the Institut für Kernphysik - Goethe Universtität Frankfurt an experimental setup allows to produce quasi maxwell-distributed neutron fields to measure maxwell-averaged cross sections (MACS) relevant for s-process nucleosynthesis. The setup was upgraded by a fast electric linear guide to transport samples from the activation to the detection site. The cyclic activation of the sample allows to increase the signal-to-noise ratio and to measure neutron captures that lead to nuclei with
half-lives on the order of seconds. In a first campaign, MACS of the reactions 51V(n,γ), 107,109Ag(n,γ) and 103Rh(n,γ) were measured. The new components of the setup aswell as the data analysis framework are described and the results of the measurements are discussed.
We study the polarization of relativistic fluids using the relativistic density operator at global and local equilibrium. In global equilibrium, a new technique to compute exact expectation values is introduced, which is used to obtain the exact polarization vector for fields of any spin. The same result has been extended to the case of massless fields. Furthermore, it is demonstrated that at local equilibrium not only the thermal vorticity but also the thermal shear contribute to the polarization vector. It is shown that assuming an isothermal local equilibrium, the new term can solve the polarization sign puzzle in heavy ion collisions.
Terahertz (THz) radiation lies between the micro and far-infrared range in the electromagnetic spectrum. Compared with microwave and millimeter waves, it has a larger signal bandwidth and extremely narrow antenna beam. Thus, it is easier to achieve high-resolution for imaging and detection applications. The unique properties, such as penetration for majority non-polar materials, non-ionizing characteristic and the spectral fingerprint of materials, makes THz imaging an appealing artifice in the military, biomedical, astronomical communications, and other areas. However, THz radiation’s current low power level and detection sensitivity block THz imaging system from including fewer optical elements than the visible or infrared range. This leads to imaging resolution, contrast, and imaging field of view degenerate and makes the aberration more serious. THz imaging based on the space Fourier spectrum detection is developed in this thesis to achieve high-quality imaging. The main concept of Fourier imaging is by recording the field distribution in the Fourier plane (focal plane) of the imaging system; the information of the target is obtained. The numerical processing method is needed to extract the amplitude and phase information of the imaged target. With additional process, three-dimensional (3D) information can be obtained based on the phase information. The novel recording and reconstructing ways of the Fourier imaging system enables it to have a higher resolution, better contrast, and broader field of view than conventional imaging systems such as microscopy and plane to plane telescopic imaging system.
The work presented in this thesis consists of two imaging systems, one is working at 300 GHz based on the fundamental heterodyne detection of the THz radiation, the other is operated at 600 GHz by utilizing the sub harmonic heterodyne detection technique. The realization and test of the heterodyne detection are based on the THz antenna-coupled field-effect transistor (TeraFET) detector developed by Dr. Alvydas Lisauskas. Both systems use two synchronized electronic multiplier chains to radiate the THz waves. One radiation works as the local oscillator (LO), the other works as illumination with a slight frequency shift, the radiations are mixed on the detector scanning in the Fourier plane to record the complex Fourier spectrum of the imaged target. The LO has the same frequency range as the illuminating radiation for fundamental heterodyne detection but half the frequency range for the sub-harmonic heterodyne detection. The 2-mm resolution, 60-dB contrast, and 5.5-cm diameter imaging area at 300 GHz and the of 500-μm resolution, 40-dB contrast, and 3.5-cm diameter imaging area at 600 GHz are achieved (the 300-GHz illuminating radiation has the approximate power of 600 μW , the 600-GHz illuminating radiation has the approximate power of 60 μW ).
The thesis consists of 6 parts. After the introduction, the second chapter expands on the topic of Fourier optics from a theoretical point of view and the simulations of the Fourier imaging system. First, the theory of the electromagnetic field propagation in free space and through an optical system are investigated to elicit the Fourier transform function of the imaging system. The simulation is used for theoretical considerations and the implementation of a Fourier optic script that allows for numerical investigations on reconstruction. The preliminary imaging field of view and resolution are also demonstrated. The third chapter describes the Fourier imaging system at 300 GHz based on the fundamental heterodyne detection, including the experimental setup, the 2D, and 3D imaging results. The following fourth chapter reports the integration of the TeraFET detector with two substrate lenses (one is a Si lens on the back-side Si substrate, the other is a wax/PTFE lens on the front side containing the bonding wires) for sub-harmonic heterodyne detection at 600 GHz. The characteristic of the wax/PTFE lens at THz range is presented. After that, the compared imaging results between the detector with and without the wax/PTFE lens are shown. The fifth chapter extends the demonstration on the lateral and depth resolution of the Fourier imaging system in detail and uses the experimental results at 600 GHz to validate the analytical predictions. The comparison of the resolution between the Fourier imaging system and the conventional microscopy system proves that the Fourier imaging system has better imaging quality under the same system configuration. The last chapter in this thesis concludes on the findings of the THz Fourier imaging and gives an outlook for the enhancement of the Fourier imaging system at THz range.
Die vorliegende Arbeit befasst sich mit der Untersuchung der Transporteigenschaften inklusive Ladungsträgerdynamik von quasi-zweidimensionalen organischen Ladungstransfersalzen. Diese Materialien besitzen eine Schichtstruktur und weisen eine hohe Anisotropie der elektrischen Leitfähigkeit auf. Aufgrund der geringen Bandbreite und der niedrigen Ladungsträgerkonzentration gehören die Materialien zu den stark-korrelierten Elektronensystemen, wobei sich die elektronischen Eigenschaften leicht durch chemische Modifikationen oder äußere Parameter beeinflussen lassen. Die starken Korrelationen resultieren in Metall-Isolator-Übergängen, die sich beim Mott-isolierenden Zustand in einer homogenen Verteilung und beim ladungsgeordneten Zustand in einer periodischen Anordnung der lokalisierten Ladungsträger manifestieren.
Mithilfe der Fluktuationsspektroskopie, die sich mit der Analyse der zeitabhängigen Widerstandsfluktuationen befasst, konnten im Rahmen dieser Arbeit neue Erkenntnisse über die Ladungsträgerdynamik in den verschiedenen elektronischen Zuständen gewonnen werden. Die Metall-Isolator-Übergänge in den untersuchten Systemen, die auf den Molekülen BEDT-TTF (kurz: ET) bzw. BEDT-TSF (kurz: BETS) basieren, sind von der Stärke der strukturellen Dimerisierung abhängig und wurden durch die Kühlrate, eine Zugbelastung sowie durch die Ausnutzung des Feldeffekts beeinflusst.
In den Systemen κ-(BETS)₂Mn[N(CN)₂]₃, κ-(ET)₂Hg(SCN)₂Cl und κ-(ET)₂Cu[N(CN)₂]Br sind die Donormoleküle als Dimere angeordnet, sodass aufgrund der effektiv halben Bandfüllung bei genügender Korrelationsstärke häufig ein Mott-Übergang auftritt. In κ-(ET)₂Hg(SCN)₂Cl führt eine schwächere Dimerisierung jedoch zu einem Ladungsordnungsübergang, der mit elektronischer Ferroelektrizität einhergeht. Dabei wird die polare Ordnung durch eine Ladungsdisproportionierung innerhalb der Dimere verursacht. Die Widerstandsfluktuationen zeigen am ferroelektrischen Übergang einen starken Anstieg der spektralen Leistungsdichte, eine Abhängigkeit vom angelegten elektrischen Feld sowie Zeitabhängigkeiten, die auf räumliche Korrelationen der fluktuierenden Prozesse hindeuten. Diese Eigenschaften wurden ebenfalls für das System κ-(BETS)₂Mn[N(CN)₂]₃ beobachtet. Hierbei wurden mithilfe der dielektrischen Spektroskopie ebenfalls Hinweise auf Ferroelektrizität gefunden, während durch die Analyse der stromabhängigen Widerstandsfluktuationen die Größe der polaren Regionen abgeschätzt werden konnte. Das System κ-(ET)₂Cu[N(CN)₂]Br, das in einer Feldeffekttransistor-Struktur vorliegt, erlaubt neben der Untersuchung des Bandbreiten-getriebenen Mott-Übergangs durch die Zugbelastung eines Substrats auch die Beeinflussung der elektronischen Eigenschaften durch die Änderung der Bandfüllung mittels elektrostatischer Dotierung. Hierbei wurden starke Abhängigkeiten des Widerstands von der Gatespannung beobachtet und Ähnlichkeiten der Ladungsträgerdynamik zu herkömmlichen Volumenproben gefunden.
Bei den Systemen θ-(ET)₂MM'(SCN)₄ mit MM'=CsCo, RbZn, TlZn tritt ein Ladungsordnungsübergang auf, der eine starke Abhängigkeit von der Kühlrate zeigt. Durch schnelles Abkühlen lässt sich der Phasenübergang erster Ordnung kinetisch vermeiden, wodurch ein Ladungsglaszustand realisiert wird. Dieser metastabile Zustand zeigt neuartige physikalische Eigenschaften mit Ähnlichkeiten zu herkömmlichen Gläsern und wurde als Folge der geometrischen Frustration der Ladung auf einem Dreiecksgitter diskutiert. Im Rahmen dieser Arbeit konnte die Ladungsträgerdynamik in den verschiedenen Ladungszuständen von unterschiedlich frustrierten Systemen verglichen werden. Zur Realisierung sehr schneller Abkühlraten wurde dafür eine Heizpulsmethode verwendet und weiterentwickelt. Der Ladungsglaszustand zeigte dabei für verschiedene Systeme ein deutlich niedrigeres Rauschniveau als der ladungsgeordnete Zustand. In Kombination mit Messungen der thermischen Ausdehnung und kühlratenabhängiger Transportmessungen wurde in den Systemen mit der stärksten Frustration die Existenz eines strukturellen Glasübergangs nachgewiesen, der von einer starken Verlangsamung der Ladungsträgerdynamik begleitet wird. Diese Erkenntnisse werfen ein neues Licht auf die bisherige rein elektronische Interpretation des Ladungsglaszustands und heben den Einfluss der strukturellen Freiheitsgrade hervor.
This work ties in with the investigation of the intermediate valent states and valence fluctuations in certain europium based intermetallic systems. Valence fluctuations are a property of the electronic system of a compound that is possibly accompanied by structural effects, which, in some cases, are quite noticable. By assuming how the changes in the electronic system and in the crystal lattice are connected, valence _uctuations of europium are believed to be a possible probe for the theory of quantum critical elasticity, which is investigated on by the SFB TRR 288 (Frankfurt, Mainz, Karlsruhe, Bochum, Dresden).
Here, the proceedings in growing single crystals of di_erent compounds related to this _eld of research are reported. This includes the ThCr2Si2 (122) type compounds EuPd2Si2 as well as the doping series EuPd2(Si1-xGex)2, the Europium based ternary Phosphides EuFe2P2, EuCo2P2, EuNi2P2 and EuRu2P2, and attempts to grow compounds of a derived 1144 structure by ordered substitution of half the Europium, EuKRu4P4.
The largest part of this work focusses on the EuPd2Si2 system, which exhibits intermediate valent europium and a temperature dependent transition between two di_erent intermediate valent states of europium. Crystals of this system were grown using the Czochralski method with a levitating melt and an europium excess flux after a two step prereaction process. Also, explorations of a PdSi-rich flux and external flux methods are reported. Ten Czochralski grown experiments, in six generations iteratevely seeded by the previous generation, were prepared.
Thermodynamical and structural analyses of the crystals located the transition between the di_erent intermediate valent states of europium between 140K and 165 K, transitioning from a high temperature Eu2.3+ state to a low temperature Eu2.7+ state, and classified it as a second order transition. To this transition a lattice anomaly of the a-parameter collapsing about 2% is connected, while the c-parameter remains largely unaffected. Large differences between individual samples can be explained by combining thermodynamical and structural analyses with compositional analysis, revealing the valence transition temperature as strongly dependent on the sample composition and Pd-Si site interchanges.
Searching to change the character of the valence transition to first order, silicon was substituted by germanium to introduce negative pressure. Germanium substituted samples of EuPd2(Si1-xGex)2 were grown using the Czochralski method with the optimized parameters from the growth experiments for the undoped compound. Samples were prepared with a nominal substitution of x = 0.05, x = 0.10, x = 0.15, x = 0.20 (twice) and x = 0.30. For the EuPd2(Si1-xGex)2 system, a phase diagram for the europium valence states is derived from chemical and thermodynamical characterizations.
n ternary europium phosphides EuT2P2, the position of the compounds in the generalized phase diagram and the question of long range magnetic order or valence transition appear connected to an isostructural transition of the tetragonal crystal structure, drastically decreasing the length of the c-parameter while establishing covalent bonds between phosphorus atoms of different interlayers of the structure, the so called ‚collapse‘. While EuFe2P2, EuT2P2 and EuCo2P2 display both long range magnetic order and a non-collapsed crystal structure, EuNi2P2 shows both a valence transition between two intermediate valent states at a characteristic temperature of 36K - accompanied by a small lattice anomaly of the a-parameter shrinking about 0.2% - and a collapsed crystal structure. Samples of EuFe2P2, EuCo2P2 and EuNi2P2 were grown in tin flux and using solid-solid sintering approaches.
Single crystals of EuFe2P2, EuCo2P2 and EuRu2P2 were investigated at ESRF in Grenoble with single crystal X-ray di_ractometry on a pressure range up to 15GPa and at temperatures down to 15K to investigate the nature of the structural transitions in the compounds. While in EuCo2P2 the structural transition occurs as a transition of first order at all temperatures (e.g. at 2GPa for 15 K), in EuFe2P2 and EuRu2P2 the structural collapse evolves over a broad pressure range up to 8GPa and as a transition of second order troughout the temperature ranges, albeit seeming to sharpen at lower temperatures. From the crystallographic data, elastic constants of the compounds could be derived, revealing EuFe2P2 and EuRu2P2 as unexpectedly elastic materials.
In order to probe the structural collapse at more accessible pressures, crystals with a sturcture derived from the 122 structure, but with ordered 50% substitution of europium and hence altering the symmetry from I4/mmm to P4/mmm in a 1144 structure, were exploratively pursued. Different experiments to obtain EuAT4P4 (with A = K, Rb, Cs and T = Fe, Ru) from binary or ternary prereactants or directly from the elements remained largely unsuccessful.
The development of the designs of the superconducting CH cavities of the HELIAC project from CH0 [27] to CH1 and CH2 [1] has undergone permanent improvements and adaptations based on the learned experiences of each previous cavity. For example, the design of CH1 and CH2 focused on mechanical stabilization and optimization of performance by minimizing peak electric and magnetic fields. As a result, the changes made there were already able to increase stability and performance compared to CH0 by simplifying the design in different ways. The process of designing both cavities was time reasonable, since they are identical in construction and thus only one design had to be developed. However, for both the development and manufacturing of an entire accelerator of individual CH cavities, this type of design would become too time consuming and costly. In order to reduce this time-consuming design process and accelerate the fabrication of superconducting CH cavities, and also reduce costs, a modular cavity design for mass production of superconducting CH cavities was developed as presented in this thesis. In the following section, the conclusions gained in this work and the results already presented will be summarized once again.
So in the first chapters of this thesis the theoretical foundations were laid, which are necessary for the description of superconducting cavities and for their development process, like a theoretical description of superconductivity itself (see chapter 2), the physical basics of RF-acceleration and of the CH cavity (see chapter 3), but also the effects that limit the superconducting cavities in terms of acceleration (see chapter 4) or the properties and laws from structural mechanics needed in later measurements and simulation (see chapter 5). Based on the theoretical foundations given in these sections, all measurements, evaluations and simulations made in the following sections were made.