Refine
Year of publication
- 2009 (159) (remove)
Document Type
- Article (82)
- Doctoral Thesis (69)
- Book (5)
- Report (3)
Has Fulltext
- yes (159)
Is part of the Bibliography
- no (159)
Keywords
- Gentherapie (3)
- ADC (2)
- Biochemie (2)
- Crystallography (2)
- HIV (2)
- Kraftmikroskopie (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Quantenchemie (2)
Institute
- Biochemie und Chemie (159) (remove)
Solid state NMR is a emerging method for the study of membrane proteins, which has received much interest in recent years. Limiting the study of many pharmacologically relevant targets, are the often long measuring times, required to obtain especially higher dimensional solid state NMR spectra of good quality. To address this problem, multiple methods where developed in this work, which can be categorized into two groups. The first set of methods aims at the quality of certain spectra, by implementing a spectral filter, which increases the fidelity of the measured data. The second set of methods, addresses the problem of long measuring times directly, by increasing the sensitivity per unit time, as could be shown, for example, on homo- and heteronuclear singlequantum-singlequantum correlation experiments. The gains in measuring time for the latter group of methods are typically in the order of 2-3, but some experiments allow multiple methods to be employed simultaneously, which can lead to a decrease in measuring time of a factor of up to 8. It is important to mention, that none of the methods introduced in this work require any equipment in addition to the conventional setup present in most sold state NMR laboratories and no changes or addition to the samples under study are required. Therefore the gains reported in this work come at no extra cost and require only minimal implementation effort on the side of the user.
In the production of integrated circuits (ICs), photolithography plays a key role in wafer structuring. The basic principle of photolithography is the selective processing of areas (etching, implantation, metallisation etc.) while the others are covered and therefore protected by the resist. After each process step the resist, now modified, has to be removed. In the history of semiconductor manufacturing this has been accomplished with a mixture of H2SO4 and H2O2, H2SO4 and O3 or a plasma etch. As the structure sizes decreased they reached a stage where they had to be exposed to light of shorter wavelengths for the photolithography, going from i-line (365 nm) to DUV (248 nm and 193 nm). This change in wavelength now requires new resists and therewith new stripping methods. Beside the changes in the resist the finer structures are also more sensitive to damages caused by the resist strip. Along with this the demand for cost reduction and environment-friendliness poses a big challenge for modern resist stripping. In this study ozone in deionised water (DI/O3) was the basic chemistry investigated as it is cost efficient in production and disposal as well as environment friendly. Furthermore it is a chemistry known to cause no damage to the wafers. DI/O3 has been successfully applied to strip i-line resists. The challenge now is to find ways and means to make DI/O3 strip even highly implanted DUV resists which currently can only be removed by a plasma etch. To achieve this a detailed understanding of the behaviour of ozone in DI water and the influence of factors both chemical and physical on the stripping efficiency at the different stages in the process is necessary. Along with this, methods which enable the elucidation of resist structures and the changes they undergo during the process of photolithography as well as during the ozone strip have to be developed. This will enable us to understand the mechanisms involved and hence, ideally, develop ozone-based stripping solutions customized for each resist and process step. For this purpose the ozone decomposition in DI water with and without additives was studied via UV-Vis spectroscopy. Radicals generated within the ozone decomposition were trapped and quantified, the resists were studied directly on the wafer with IR and Raman spectroscopy and stripped with DI/O3-mixtures and different setups to find optimum conditions for a complete and damage free resist strip. UV-Vis spectroscopy at 260 nm was used to study ozone decomposition and the factors, both chemical and physical, which influence it. These factors are pH, different additives at the same pH, temperature and mixing of the solution. For the radical determination trapping reactions with MeOH and DMSO both forming CH2O which is further converted to DDL as the detectable species were compared with a variation of the classical iodometric titration acting as an absolute method without the need of calibration. IR spectroscopy proved to be a suitable method for the structural characterisation of the resists and the tracking of the changes undergone during the various processing steps as well as the ozone based stripping. For the stripping with DI/O3 IR spectroscopy delivered well-defined spectra. These displayed significant peak changes which support the assumption of classical ozonolysis as the decomposition mechanism for the unimplanted resist. For the study of the resist crust originating from ion implantation IR was fundamentally unsuitable and was replaced by Raman spectroscopy and microscopy. Raman spectra showed the crust to be of a highly carbon containing structure. Regrettably, the peak assignable to the crust was too broad for the exact composition of the crust to be determined. The wavelength region of the peak corresponds to that of peaks of glassy carbon and highly ordered and conventional graphite. Such a broad peak suggests that the structure of the crust is not uniform but contains more than one carbon modification. As the purpose of all these studies is to enable or improve DI/O3 based resist stripping on unimplanted as well as high-dose implanted resists the removal efficiency of DI/O3 spiked with different additives that alter the pH was studied. For these unimplanted resists the maximum efficiency could be achieved at pH = 5 – 7. Lowering or increasing the pH beyond this range gave poor results. The stripping of highly implanted resists could be achieved only at harsh conditions with a high pH-level of 12 - 13 with a narrow process window showing no stripping at lower pHs and severe damages at higher levels. The principle application of DI/O3 stripping chemistry could be proved but the currently required process time unfortunatelly is too long for commercial application and needs further optimisation.
The use of chemically synthesized short interfering RNAs (siRNAs) is currently the method of choice to manipulate gene expression in mammalian cell culture, yet improvements of siRNA design is expectably required for successful application in vivo. Several studies have aimed at improving siRNA performance through the introduction of chemical modifications but a direct comparison of these results is difficult. We have directly compared the effect of 21 types of chemical modifications on siRNA activity and toxicity in a total of 2160 siRNA duplexes. We demonstrate that siRNA activity is primarily enhanced by favouring the incorporation of the intended antisense strand during RNA-induced silencing complex (RISC) loading by modulation of siRNA thermodynamic asymmetry and engineering of siRNA 3-overhangs. Collectively, our results provide unique insights into the tolerance for chemical modifications and provide a simple guide to successful chemical modification of siRNAs with improved activity, stability and low toxicity.
Ein bekanntes Beispiel für regulatorische RNA-Protein-Wechselwirkung stellt der Komplex der TAR-RNA von HIV-1 und dem viralen Protein Tat dar. Dieser Komplex ist wichtig für die effiziente Transkription des viralen Genoms. Essentiell für die Erkennung der Stem-Loop Struktur ist die Wechselwirkung des Tat-Proteins mit dem aus drei Nukleotiden bestehenden Bulge der TAR-RNA. Das Wissen über die Prinzipien der Erkennung von Tat zu TAR-RNA sollte es möglich machen, spezifische Liganden zu designen, die als antivirale Tat Antagonisten angreifen können. Das Ziel dieser Arbeit war die Synthese von RNA Liganden für die Festphasenpeptidsynthese (FPPS) basierend auf heteroaromatischen Bausteinen. Als Strategie wurde gewählt, die heteroaromatischen Reste über Amid-Bindungen an ein Fmoc geschütztes (2-Aminoethyl)glycin-Rückgrat einzufügen. Die peptidomimetischen Bausteine X konnten in der FPPS zur Synthese von Tripeptiden mit der allgemeinen Struktur Arg-X-Arg und Modifikationen mit Lysin eingesetzt werden. Die Bindungsaffinitäten der Tripeptide und kleinen Moleküle zur TAR-RNA von HIV-1 wurden über einen fluoreszenzbasierten Assay bestimmt. Der Assay verwendet ein doppelt endmarkiertes Tat-Peptid mit Fluorescein und Rhodamin als Farbstoff. Durch Verdrängung des Tat-Peptides durch einen konkurrierenden Liganden kommt es zur Konformationsänderung des Peptides, die zur Löschung der Lichtemmission führt. Dabei zeigen die Tripeptide H2N-(D)Arg-Lactam-(D)Arg-CONH2 (154) und H2N-(D)Arg-Amidin-(D)Arg-CONH2 (158) IC50-Werte von 2-3 mikroM, die auch durch Fluoreszenz Korrelations Spektroskopie (FCS) bestätigt wurden. In massenspektrometrischen Untersuchungen von 158 bzw. Tat-Protein mit TAR-RNA konnten bei beiden Peptiden 1:1 und 1:2-Komplexe beobachtet werden. 158 zeigt antivirale Eigenschaften (IC50 = 10-50 mikroM) in HeLa P4-Zellassays. Durch NMR-Untersuchungen und molekulardynamische Berechnungen war es möglich, eine Konformationsänderung der TAR-RNA durch eine Wechselwirkung mit Guanidinium-Gruppen festzustellen. Ein weiteres Ziel der Arbeit war daher ausgehend von den gewonnenen Daten die Untersuchung des Bindungskonzeptes von Diaminopyrazolen und Indazolen. Diaminopyrazole mit kleinen Resten und Triaminopyrazol übertreffen im protonierten Zustand den dikationischen Liganden Argininamid. In Übereinstimmung mit dem Bindungsmodell verhalten sich protonierte Aminopyrazole wie „Super-Guanidine“ hinsichtlich der TAR-RNA. Das Einfügen des Triaminopyrazols in ein Phenazin-Grundgerüst führt zu Verbindungen, die im protonierten und reduzierten Zustand zusätzliche Wasserstoffbrückenbindungen eingehen können und nicht planar, aber lipophil sind. Der Austausch von Stickstoff zu Sauerstoff im Phenazinring sollte den reduzierten Zustand stabilisieren. Die resultierende Struktur ist jedoch zersetzlich, so dass auf weitere Untersuchungen verzichtet wurde.
Die gezielte Modifikation von Proteinen für die Erforschung des Proteoms stellt eine entscheidende Herausforderung dar. Sie wird meistens dann zwingend notwendig, wenn das intrinsische Signal zum Auslesen ungeeignet ist. So ist es z.B. für die größte Anzahl von fluoreszenzbasierenden Methoden unerlässlich, das zu untersuchende Protein spezifisch und einheitlich mit einem Fluorophor zu markieren. Eine weitere Schwierigkeit ist die gerichtete Immobilisierung von Proteinen für deren Charakterisierung an Oberflächen. Im Rahmen dieser Arbeit wurde die spezifische Markierung, Manipulation und strukturierte Immobilisierung von rekombinanten Proteinen analysiert. Dafür wurde mit dem hauptsächlich aus der Proteinreinigung bekannten NTA/Oligohistidin-System gearbeitet. Verwendet wurden multivalte NTA-Chelatorköpfen mit zwei (bisNTA), drei (trisNTA) oder vier (tetrakisNTA) NTA-Gruppen pro Molekül. Durch die Multivalenz können hervoragende Bindungsaffinitäten im nanomolaren Bereich erzielt werden, die die stabile, stöchiometrische, nicht kovalente und damit reversible Modifikation His-getaggter Proteine in Lösung und an Grenzflächen erlaubt. Fluoreszente trisNTAs wurden vielfach erfolgreich für die Markierung His-getaggter Proteine eingesetzt. Dabei wurde die Beobachtung gemacht, dass die Ni2+-Ionen im trisNTA die Emission des benachbarten Fluorophors stark quenchen und dadurch die Einsatzmöglichkeiten der Verbindung reduzieren. Durch die räumliche Trennung der beiden Gruppen mit starren, biokompatiblen Polyprolin-Helices konnte erstmals systematisch demonstriert werden, dass das Ausmaß der Fluoreszenzlöschung abstandsabhängig ist. Bei der Verwendung von 12 Prolinen (3.6 nm lange Helix) wurde mit einem ATTO565-Derivat eine Intensitätserhöhung um etwa 70%, und bei einem OregonGreen488-Derivat um etwa 40% erreicht. Bei den Verbindungen können der Abstand der beiden Gruppen voneinander und der Fluorophor nahezu frei gewählt werden, so dass eine Optimierung in Hinblick auf die jeweilige Fragestellung ohne Probleme möglich ist. In Kooperationen untersucht wurden z.B. die ATP-Hydrolyse von MDL1 und die ATP-Bindung von TAP. Die deutlich verbesserte Quantenausbeute, die stabile Bindung an einen His-Tag und die geringe Größe machen die Verbindungen zu idealen Reportersonden für die Einzelmolekül-Fluoreszenz-Analyse. Die gezielte Manipulation eines makromolekularen Proteinkomplexes mit einem kleinen Molekül wurde in einem weiteren Projekt untersucht. Das tetrakisNTA wurde verwendet, um die His-getaggten Eingänge des alphaN-His6 Proteasoms von Thermoplasma acidophilum gezielt zu blockieren. Durch den Abbau von Fluoreszein-markiertem Casein konnte die Aktivität der Proteasomkomplexe in Echtzeit verfolgt werden. Unter Zugabe von tetrakisNTA fand kein Abbau statt, während dieser ohne oder nach Entfernen der tetrakisNTAs von den Eingängen im gleichen Maße detektierbar war. Die Aktivität der Peptidase-Schnittstellen im blockierten Zustand konnte durch die Überschichtung eines nativen Gels mit einem Peptidsubstrat demonstriert werden. Die Ergebnisse belegen, dass die His-Tags an den Eingängen des Proteasomkomplexes so umstrukturiert werden, dass der Eintritt von Proteinen reversibel blockiert wird. Neben der gezielten Manipulation des Proteasoms wurde außerdem erstmals die spezifische Fluoreszenzmarkierung His-getaggter Proteine in kompletten E. coli Zelllysaten mittels nativer PAGE nachgewiesen. Um neue Anwendungsgebiete für das trisNTA zu erschließen, sollte dieses mit einem 1.4 nm großen Goldcluster modifiziert werden. Damit könnte die Position von His-Tags in Proteinkomplexen mittels Elektronenmikroskopie visualisiert werden. Mittels Gelfiltration mit MBP-H6 wurde nachgewiesen, dass die entwickelten Goldcluster teilweise mehr als eine trisNTA-Gruppe auf der Oberfläche hatten, wobei eine Trennung der Partikel nach der Anzahl der NTA-Gruppen nicht möglich war. Die Partikel wurden erfolgreich für die spezifische Markierung des alphaN-His6 Proteasoms verwendet. In der Einzelpartikelanalyse deutlich erkennbar waren der markierte Proteasomkomplex und die Lage des trisNTA-Goldclusters. Die Verwendung solcher Goldpartikel in der EM bringt entscheidende Vorteile im Hinblick auf die Strukturaufklärung von Proteinen mit sich. Orthogonale NTA/His-Tag Bindungspaare, bei denen ein bestimmtes, multivalentes NTA-Molekül einen definierten His-Tag bindet, würden einen großen Nutzen für die spezifische Markierung oder Immobilisierung verschiedener His-getaggter Proteine bringen. Durch die Verwendung teilweise rigider His-Tags und möglichst starrer bisNTAs sollten solche Bindungspaare realisiert werden. Die Synthese rigider bisNTAs mit unterschiedlichen Abständen zwischen den NTA-Gruppen konnte erfolgreich etabliert werden. Allerdings zeigten Fluoreszenztitrationen mit verschieden Fluoreszeinmarkierten His-Peptiden nicht die erhofften Unterschiede in den Affinitäten. Im letzten Teil der Arbeit wurden durch intramolekulare His-Tags inaktive trisNTAs synthetisiert. Diese können durch Licht gespalten und damit aktiviert werden (photoaktivierbare trisNTAs, PAtrisNTAs). Die Verbindungen mit unterschiedlicher Anzahl an Histidinen im intramolekularen Tag wurden systematisch in Lösung und an Oberflächen charakterisiert. Dazu wurden HPLC-Studien, Gelfiltrationen und SPR-Experimente durchgeführt. Die strukturierte Organisation von Proteinen auf solchen lichtaktivierbaren Oberflächen wurde mittels Fluoreszenzmikroskopie demonstriert. Außerdem konnten durch die Laserlithographie gezielt verschiedene His-getaggte Proteine in situ in definierten Bereichen immobilisiert werden. Die Biokompatibilität der Oberflächen wurde erfolgreich durch die strukturierte Organisation aktiver, Virusbindender Rezeptor-Partikel gezeigt. Im Prinzip sollte das Konzept die lichtinduzierte Aufkonzentrierung von His-getaggten Rezeptoren in lebenden Zellen ermöglichen. Durch das Clustern ausgelöste Vorgänge könnten so gezielt herbeigeführt und analysiert werden.
Misregulated receptor tyrosine kinases (RTKs), i.e. the epidermal growth factor receptor EGFR or the insulin-like growth factor receptor 1 (IGF-1R), can be involved in the development of cancer. Monoclonal antibodies specifically inhibit the RTKs in cancer therapy. The scope of this thesis is to investigate the molecular basis of the inhibition through the therapeutic antibodies matuzumab (EMD72000) against EGFR and EMD1159476 against IGF-1R. The 3D crystal structure of matuzumab in complex with the EGFR domain III shows an eptiope connected with a novel inhibition mechanism: a non-competitive, sterical inhibition of receptor acitivation. The anti-IGF-1R targeted monoclonal antibody EMD1159476 shows a reduced binding capacity to the receptor in the presence of ligand indicating a competitive inhibition mechanism. The epitope of EMD1159476 is within domain II of the receptor. The results of these molecular interaction studies are important for the clinical therapies with these monoclonal antibodies. The matuzumab-EGFR complex crystal structure shows that a simultaneous binding of matuzumab and cetuximab (Erbitux) is possible. The latter antibody is already in clinical use. A combination of several therapeutic antibodies in cancer treatment might show synergistic effects and benefits for the patients.
Regulation des matrizellulären Proteins SMOC-1 durch Zytokine und Stickoxid in Rattenmesangiumzellen
(2009)
Zytokine stimulieren in Mesangiumzellen die Produktion und die Freisetzung großer Mengen entzündlicher Mediatoren. In dieser Arbeit wurden mit Hilfe der RAP-PCR („RNA arbitrarily primed polymerase chain reaction“), einer auf mRNA basierenden „Differential display“-Methode, die Effekte von Interleukin-1β (IL-1β) auf das Genexpressionsmuster in glomerulären Rattenmesangiumzellen untersucht. Dabei wurde das matrizelluläre Glykoprotein „Secreted modular calcium-binding protein-1“ (SMOC-1) identifiziert, welches in Mesangiumzellen durch IL-1β herunterreguliert wird. SMOC-1 wird von verschiedenen Zelltypen exprimiert und sezerniert, doch seine biologische Funktion konnte bisher nicht aufgedeckt werden. Weitere Experimente bestätigten, dass die mRNA- und Proteinexpression von SMOC-1 durch proinflammatorische Zytokine, wie IL-1β und Tumornekrosefaktor-α (TNF-α) herunterreguliert wird. Dieser Effekt wird zu einem großen Teil durch die endogene Freisetzung von Stickoxid (NO) aufgrund der Aktivität der induzierbaren NO-Synthase (iNOS) und der nachfolgenden Aktivierung der löslichen Guanylatzyklase (sGC) vermittelt. Außerdem tragen auch reaktive Sauerstoffver-bindungen (ROS), deren Bildung durch die Zytokine verstärkt wird, zur Herunter-regulierung der SMOC-1-Expression bei. Durch In-situ-Hybridisierungsexperimente konnte ferner gezeigt werden, dass die Hemmung der NO-Synthese durch den spezifischen iNOS-Inhibitor L-NIL in einem Rattenmodell der anti-Thy1.1-Glomerulonephritis die SMOC-1-Expression deutlich erhöhte. Dies belegt somit auch in vivo die biologische Relevanz von NO in der Modulierung der SMOC-1-Expression. Die funktionelle Rolle von SMOC-1 in Mesangiumzellen wurde durch die Hemmung der SMOC-1-Expression mit Hilfe einer spezifischen siRNA untersucht. Dabei zeigte sich, dass die Hemmung von SMOC-1 eine deutliche Inhibierung der mRNA-Expression von „Transforming growth factor β1“ (TGF-β1) sowie dessen Gesamtproteinspiegel zur Folge hat. Auch die Aktivität von TGF-β1 wurde reduziert, wie anhand der verringerten Spiegel an aktivem TGF-β1-Protein und der verringerten mRNA-Expression bekannter TGF-β-regulierter Gene, wie „Connective tissue growth factor“ (CTGF), „Plasminogen activator inhibitor-1“ (PAI-1) und Biglykan gezeigt wurde. Diese Ergebnisse deuten auf eine Rolle von SMOC-1 bei der Modulierung des TGF-β1-Signalwegs hin. Zusammenfassend betrachtet scheint NO die SMOC-1-Expression in der akuten glomerulären Entzündung zu vermindern und dadurch die TGF-β-getriebenen profibrotischen Signalprozesse zu limitieren. Der zweite Aspekt dieser Arbeit befasst sich mit der Rolle von Peroxisomen-Proliferator-aktivierten Rezeptoren (PPAR) in der IL-1β-vermittelten Expression der induzierbaren NO-Synthase. PPARα-Aktivatoren steigern in Mesangiumzellen die IL-1β-induzierte Aktivität der iNOS, während die Hemmung von PPARα durch spezifische Inhibitoren oder siRNA die iNOS-Expression/-Aktivität deutlich reduziert. Die Ergebnisse von Promotor-studien zeigten die essentielle Rolle einer möglichen PPAR-Bindestelle im iNOS-Promotor. IL-1β scheint die Bildung eines endogenen PPAR-Liganden zu induzieren, wodurch die Bindung von PPAR-Proteinkomplexen an das regulatorische DNA-Element im iNOS-Promotor verstärkt und dessen Aktivität gesteigert wird. Daneben scheinen jedoch auch Nebeneffekte der PPAR-Aktivatoren, wie die Freisetzung von ROS, zur synergistischen Wirkung auf die IL-1β-induzierte iNOS-Expression beizutragen. Die Wirkung von dualen PPARα/γ-Aktivatoren auf entzündliche Prozesse wird seit längerem diskutiert, daher wurden die biologischen Effekte von neu synthetisierten möglichen dualen PPARα/γ-Aktivatoren auf Entzündungsparameter, wie z. B. die iNOS-Expression, in Mesangiumzellen untersucht. Alle untersuchten Aktivatoren steigerten in der Form von Esterverbindungen die IL-1β-induzierte Expression der iNOS sowie der sekretorischen Phospholipase A2 (sPLA2), während die entsprechenden freien Säuren wenig Effekte zeigten. Diese proinflammatorische Wirkung scheint jedoch weniger auf einer Aktivierung des PPAR-Rezeptors zu beruhen als auf der Freisetzung von ROS, die durch die Aktivatoren teilweise deutlich erhöht wurde. Weitere Experimente zur Charakterisierung der PPAR-spezifischen Wirkung der Aktivatoren sowie zur optimalen Wirkkonzentration sind nötig, bevor der Effekt dieser Aktivatoren auf die inflammatorische Genexpression genau bewertet werden kann.
Die Entwicklung neuer und Verbesserung bestehender Methoden zur theoretischen Beschreibung molekularer Systeme ist eine der wichtigsten Aufgaben der theoretischen Chemie, vor allem zur Berechnung elektronisch angeregter Zustände zur Simulation von Spektren. Das Ziel dieser Arbeit ist in diesem Zusammenhang die Weiterentwicklung des algebraisch-diagrammatischen Konstuktionsverfahrens (ADC), einer Methode zur Berechnung elektronisch angeregter Zustände, und die Bereitstellung effizienter Computerprogramme zum theoretischen Studium optischer Eigenschaften von "open-shell" Molekülen. Im Vordergrund stehen hierbei die physikalisch richtige Beschreibung von ladungsgetrennten Zuständen und solchen mit hohem Doppeltanregungscharakter. Verbesserte theoretische Methoden sind notwendig, da die zu berechnenden Systeme häufig für eine Beschreibung mit vorhandenen hochgenauen ab initio Methoden zu groß sind. Einfachere, durchführbare Methoden wie z.B. semi-empirische oder DFT-basierte Methoden, die es erlauben, sehr große Molekülsysteme mit mehr als 100 Atomen zu beschreiben, weisen häufig große, nicht vorhersagbare Fehler auf. Experimente im Forschungsgebiet angeregter Zustände von Molekülen finden spektroskopisch statt und erfordern auf der anderen Seite eine Unterstützung durch zuverlässige theoretische Voraussagen. Die Weiterentwicklung der Theorie ist also auch im allgemeinen Interesse der Chemie, Biologie und der anderen Naturwissenschaften. Teil 1 dieser Arbeit umfasst die Theorie, während in Teil 2 deren Anwendung auf ausgewählte Systeme zu finden ist. Nach einer allgemeinen Einführung in die Problematik und grundlegenden Methoden der Quantenchemie in Kapitel 1, wurde im ersten Teil von Kapitel 2 die Methode zur Berechnung angeregter Zustände und ihrer Eigenschaften vorgestellt, auf der diese Arbeit basiert, nämlich das algebraisch-diagrammatische Konstruktionsverfahren (ADC). Dabei sind Eigenschaften von ADC zu betonen, die es von den anderen Methoden unterscheidet. Zum einen werden in ADC alle angeregten Zustände energetisch zuverlässig beschrieben, das heißt Rydberg-, Ladungstransfer- und doppelt angeregte Zustände findet man im Anregungsspektrum an der richtigen Position. Andererseits ist die Methode eine der schnellsten zur Beschreibung doppelt angeregter Zustände (z.B. bei Polyenen) und eignet sich, deren Relevanz im Spektrum zu ermitteln. Denn die beiden Schemata ADC(2)-s und ADC(2)-x unterscheiden sich in der störungstheoretischen Behandlung doppelt angeregter Zustände um eine Ordnung, ADC(2)-s beschreibt sie in nullter Ordnung, ADC(2)-x in erster. Im folgenden Abschnitt stehen die ausführlichen Gleichungen des ADC-Verfahrens für unseren Computercode. Kapitel 2 wurde abgeschlossen durch die Gleichungen der Erweiterung von ADC zur Behandlung von "open-shell" Molekülen auf UADC. Kapitel 3 umfasst die Beschreibung der "intermediate state representation" (ISR), die zur Berechnung von Eigenschaften angeregter Zustände dient und die theoretische Herleitung des UADC-Verfahrens erlaubt. Am Anfang von Teil 2 in Kapitel 4 steht die Untersuchung der Genauigkeit und Zuverlässigkeit des neu entwickelten UADC-Verfahrens. Dabei wurden elf verschiedene, mittelgroße, aromatische Moleküle ausgewählt, zu denen in der Literatur auch experimentelle Daten zu Vergleichszwecken zu finden waren. Das Ergebnis ist sehr überzeugend und nur minimal aufwändiger als ADC. Kapitel 5 zeigt eine erste Anwendung von UADC auf größere Moleküle und stellt die Eigenschaft der Bestimmung von doppelt angeregten Zuständen von ADC und UADC noch einmal heraus. Der Vergleich der Polyene mit ihren "open-shell" Partnern, den Polyen-Radikalkationen und den neutralen Polyenylradikalen, zeigte, dass der Einfluss der Doppeltanregungen in den Radikalen kleiner ist, für eine exakte Beschreibung der angeregten Zustände ist er jedoch nicht zu vernachlässigen. Danach wurde eine Extraplation der angeregten Zustände von langkettigen Polyenen, Polyenradikalkationen und Polyenylradikalen vorgenommen, die den konjugierten pi-Systemen von Karotinoiden als Modellsysteme dienen. Die Beschreibung der Polyene bestätigte die experimentellen Vorhersagen zu Karotinoiden. Eine erste Anwendung der ISR bezüglich der Berechnung von Eigenschaften angeregter Zustände ist mit der Berechnung von Dipolmomenten angeregter Zustände in Kapitel 6 durchgeführt worden. Die Ergebnisse zeigen eine gute Übereinstimmung mit anderen Methoden und Messergebnissen. Eine weitere Anwendung der ISR ist die Berechnung von resonanten Zwei-Photonen-Absorptionsspektren, mit deren Hilfe spektroskopisch "dunkle" Zustände detektiert werden können. Die zur Berechnung notwendigen Übergangsdipolmomente zwischen angeregten Zuständen aus der ISR wurden dazu in einer sogenannten "sum-over-states" Näherung verwendet. Eine mögliche andere Berechnung über einen geschlossenen Ausdruck mit Hilfe der ADC-Näherung ist noch nicht implementiert.
Kraftfelder sind ein vielseitiges Werkzeug zur schnellen Berechnung vielfältiger Moleküleigenschaften. Die Qualität der damit erhaltenen Vorhersagen ist auch ein Maß, wie gut die wichtigen Einflussgrößen verstanden und vor allem in das Kraftfeld-Modell integriert sind. Bei der Parametrisierung müssen viele Effekte gegeneinander ausbalanciert werden, da die Kraftfeldterme nicht unabhängig voneinander betrachtet werden können. Umfangreiche Testrechnungen sind erforderlich, um die notwendige Qualität der Parameter sicher zu stellen. Eine Automatisierung dieses Prozesses bringt nicht nur eine enorme Zeitersparnis, sie zwingt auch zur sorgfältigen Definition von Vorgaben und Qualitätskriterien. Die Formulierung einer Strategie in einem Programm anstelle von „intelligentem Raten“ fördert zudem ein tieferes Verständnis. Bei einer Änderung der Strategie muss nur das entsprechende Programm geändert werden, dem Entwickler bleibt der manuelle Test erspart. Automatische Methoden zur Plausibilitätsprüfung vermeiden Probleme durch Fehler bei der Dateneingabe von Hand. Die programmgesteuerte Erstellung aussagekräftiger Protokolle und Grafiken macht die Fülle der bei der Parametrisierung und Evaluierung eines Kraftfeldes anfallenden Informationen für den Benutzer überschaubar. Probleme und deren Zusammenhang können so leichter erfasst werden. Für das MOMO-Kraftfeld konnten auf diese Weise verbesserte und neue Parameter für Wasserstoffbrücken abgeleitet werden, zwei empirische Punktladungsmodelle und deren Verträglichkeit mit zwei quantenchemischen Modellen verbessert und prinzipielle Probleme bei deren Vereinbarkeit erkannt werden sowie die automatische Parametrisierung von Bindungslängen, Bindungswinkeln und Torsionswinkeln ermöglicht werden. Bei Letzterem konnte jedoch keine Verbesserung gegenüber den Originalparametern erreicht werden, was nicht weiter verwunderlich ist, da diese seit Jahrzehnten entwickelt worden sind, wohingegen Wasserstoffbrücken und Partialladungen erst später hinzugekommen sind und nicht so umfangreich wie die bindenden Kraftfeldterme getestet wurden. Voraussetzung für die hier gewählte Vorgehensweise, alle Arbeiten weitgehend zu automatisieren und Strategien immer in Programme umzusetzen, waren sehr umfangreiche Programmierarbeiten. Ziel war es, auf einfache Weise die Steuerung des Kraftfeldes aus kleineren Programmen, die spezielle Probleme bearbeiten, zuzulassen. Durch die Nutzung zahlreicher Open-Source-Projekte, die gemeinsam die gewünschte Funktionalität zur Verfügung stellen, konnte der Aufwand auf die dazu passende Implementierung des MOMO-Kraftfeldes und das Verbinden mit der von diesen Projekten bereitgestellten Software beschränkt werden. Der Kern des MOMO-Kraftfeldes wurde aus Geschwindigkeitsgründen in der Compilersprache C geschrieben, Datenein- und -ausgabe und die Programme zur Parametrisierung und Auswertung wurden in Python geschrieben.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Specific functions of biological systems often require conformational transitions of macromolecules. Thus, being able to describe and predict conformational changes of biological macromolecules is not only important for understanding their impact on biological function, but will also have implications for the modelling of (macro)molecular complex formation and in structure-based drug design approaches. The “conformational selection model” provides the foundation for computational investigations of conformational fluctuations of the unbound protein state. These fluctuations may reveal conformational states adopted by the bound proteins. The aim of this work is to incorporate directional information in a geometry-based approach, in order to sample biologically relevant conformational space extensively. Interestingly, coarse-grained normal mode (CGNM) approaches, e.g., the elastic network model (ENM) and rigid cluster normal mode analysis (RCNMA), have emerged recently and provide directions of intrinsic motions in terms of harmonic modes (also called normal modes). In my previous work and in other studies it has been shown that conformational changes upon ligand binding occur along a few low-energy modes of unbound proteins and can be efficiently calculated by CGNM approaches. In order to explore the validity and the applicability of CGNM approaches, a large-scale comparison of essential dynamics (ED) modes from molecular dynamics (MD) simulations and normal modes from CGNM was performed over a dataset of 335 proteins. Despite high coarse-graining, low frequency normal modes from CGNM correlate very well with ED modes in terms of directions of motions (average maximal overlap is 0.65) and relative amplitudes of motions (average maximal overlap is 0.73). In order to exploit the potential of CGNM approaches, I have developed a three-step approach for efficient exploration of intrinsic motions of proteins. The first two steps are based on recent developments in rigidity and elastic network theory. Initially, static properties of the protein are determined by decomposing the protein into rigid clusters using the graph-theoretical approach FIRST at an all-atom representation of the protein. In a second step, dynamic properties of the molecule are revealed by the rotations-translations of blocks approach (RTB) using an elastic network model representation of the coarse-grained protein. In the final step, the recently introduced idea of constrained geometric simulations of diffusive motions in proteins is extended for efficient sampling of conformational space. Here, the low-energy (frequency) normal modes provided by the RCNMA approach are used to guide the backbone motions. The NMSim approach was validated on hen egg white lysozyme by comparing it to previously mentioned simulation methods in terms of residue fluctuations, conformational space explorations, essential dynamics, sampling of side-chain rotamers, and structural quality. Residue fluctuations in NMSim generated ensemble is found to be in good agreement with MD fluctuations with a correlation coefficient of around 0.79. A comparison of different geometry-based simulation approaches shows that FRODA is restricted in sampling the backbone conformational space. CONCOORD is restricted in sampling the side-chain conformational space. NMSim sufficiently samples both the backbone and the side-chain conformations taking experimental structures and conformations from the state of the art MD simulation as reference. The NMSim approach is also applied to a dataset of proteins where conformational changes have been observed experimentally, either in domain or functionally important loop regions. The NMSim simulations starting from the unbound structures are able to reach conformations similar to ligand bound conformations (RMSD < 2.4 Å) in 4 out of 5 cases of domain moving proteins. In these four cases, good correlation coefficients (R > 0.7) between the RMS fluctuations derived from NMSim generated structures and two experimental structures are observed. Furthermore, intrinsic fluctuations in NMSim simulation correlate with the region of loop conformational changes observed upon ligand binding in 2 out of 3 cases. The NMSim generated pathway of conformational change from the unbound structure to the ligand bound structure of adenylate kinase is validated by a comparison to experimental structures reflecting different states of the pathway as proposed by previous studies. Interestingly, the generated pathway confirms that the LID domain closure precedes the closing of the NMPbind domain, even if no target conformation is provided in NMSim. Hence, the results in this study show that, incorporating directional information in the geometry-based approach NMSim improves the sampling of biologically relevant conformational space and provides a computationally efficient alternative to state of the art MD simulations.
This thesis describes the structural characterization of interactions between biological relevant ribonucleic acid biomacromolecules (RNAs) and selected ligands to optimize the methodologies for the design of pharmacological lead compounds. To achieve this aim, not only the structures of the RNA, the ligand and their complexes need to be known, but also information about the inherent dynamics, especially of the target RNA, are necessary. To determine the structure and dynamics of these molecules and their complexes, liquid state nuclear magnetic resonance spectroscopy (NMR) is a suitable and powerful method. The necessity for these investigations arises from the lack of knowledge in RNA-ligand interactions, e.g. for the development of new medicinal drugs targeting crucial RNA sequences. In the first chapters of this thesis (Chapters II to IV), an introduction into RNA research is given with a focus on RNA structural features (Chapter II), into the interacting molecules, the biology of the specific RNA targets and the further development of their ligands (Chapter III) and into the NMR theory and methodologies used within this thesis (Chapter IV). Chapter II begins with a description of RNA characteristics and functions, placing the focus on the increasing attention that these biomacromolecules have attracted in recent years due to their diverse biological functionalities. This is followed by a detailed description of general structural features of RNA molecules. The biological functions of the RNAs investigated in this thesis (Human immunodeficiency virus PSI- and TAR-RNA and Coxsackievirus B3 Stemloop D in the 5’-cloverleaf element), together with their known structural characteristics are introduced in Chapter III. Furthermore, a description of the investigated ligands is given, focusing on the methods how their affinity and specificity were determined. The introduction is completed in Chapter IV, where the relevant NMR theory and methodologies are explained. First, kinetics and thermodynamics of ligand binding are summarized from an NMR point of view. Subsequently, a detailed description of the resonance assignment procedures for RNAs and peptidic ligands is given. This procedure mainly concentrates on the assignment of the proton resonances, which are essential for the later structure calculation from NMR restraints. The procedure for NMR structure calculation of RNA and its complexes follows with a short introduction into the programs ARIA and HADDOCK. The final part of this chapter explains the relaxation theory and the methodology to extract dynamic information from autocorrelated relaxation rates via the model-free formalism. In the Chapters V to VII of this thesis, the original publications are included and grouped into three topics. Chapter V comprehends the publications on the investigations of HIV PSI-RNA and its hexapeptidic ligand. These three publications[1-3] focus on the characterization of the ligand and its binding properties, its structure and the optimization of its composition aiming to improve its usage for further spectroscopic investigations.
The aim of the study was to investigate the role of the CX3C chemokine FKN in the role of platelet adhesion. The presence of the FKN receptor CX3CR1 in platelets is demonstrated and G-protein dependent activation of platelets with soluble FKN results in the increased adhesion of platelets to collagen and fibrinogen under flow 228 and adhesion of leucocytes to firmly attached platelets 231. Whether membrane-bound FKN is capable to promote the direct adhesion of platelets in flowing blood analogue to leucocytes was completely unknown. The adhesion mechanisms of FKN in mediating the adhesion of leucocytes under flow are well characterised and represent a novel unique mechanism of leucocyte capture and firm adhesion: FKN is responsible for immediate arrest of flowing CX3CR1 expressing leucocytes without the participation of additional adhesion receptors and ligands. This is in contrast to the classical leucocyte adhesion pathways, which are multistep processes involving leucocyte arrest, rolling and subsequent cell activation prior to firm arrest. In leucocytes, the FKN – CX3CR1 axis is sufficient to allow rapid arrest of leucocytes at low shear flow conditions 67, 101, 115, 122, 261. The set of data from this study demonstrates that immobilised FKN was capable to mediate the adhesion of platelets under low shear conditions, whereas there was no interaction in the absence of shear flow. In the presence of vWf in the adhesion matrix, FKN mediated the potent increased adhesion of platelets. This was in parts due to the activation of flowing platelets via CX3CR1 and the augmented translocation of platelets on FKN via the vWf receptor GPIbα. With respect to platelet activation, the function of endothelial FKN was comparable to leucocytes: in both cell types, the FKN dependent activation is mediated by its cognate receptor CX3CR1. This is in contrast to the adhesive capacity: in leucocytes, FKN dependent adhesion is mediated by CX3CR1, whereas in platelets, the adhesive capacity was mostly mediated by the vWf receptor GPIbα with only minor contribution from CX3CR1. In platelets, activation and adhesion by FKN were mediated by two distinct receptors, whereas in leucocytes, CX3CR1 is solely responsible for FKN dependent activation and adhesion. The presented results point out to a role of platelets in early stage of atherosclerosis. The in vivo expression of both, FKN and vWf is regulated by TNF-α, which is released in early stages of inflammation. The presence of vWf and FKN in the endothelial lining of blood vessels during these conditions is sufficient to initiate the capturing and translocation of platelets on the tunica interna. The rolling of platelets on the endothelium can induce endothelial damage and inflammation of the vessel, which might advance to the generation of clinically significant atherosclerotic plaques and fibrous atheroma.
P2X receptors represent the third superfamily of ligand gated ion channels with ATP as their natural ligand. Most of the mammalian P2X receptors are non-selective cation channels, which upon activation, mediate membrane depolarization and have physiological roles ranging from fast excitatory synaptic transmission, modulation of pain-sensation, LTP to apoptosis etc. In spite of them being an attractive drug target, their potential as a drug target is limited by the lack of basic understanding of the structure-function relationship of these receptors. In my thesis, I have investigated the behavior of homomeric P2X receptor subunits with the help of photolabeling and fluorescence techniques coupled to electrophysiological measurements using Xenopus laevis oocytes heterologous expression system. Concurrent photolabeling by BzATP and current recordings from the same set of receptors in real time has revealed that the gating process in homomeric P2X receptors is contributed individually by each subunit in an additive manner. Our study for the first time describes the agonist potency of Alexa-ATP (a fluorescent ATP analog) on P2X1 receptors. The use of Alexa-ATP in our experiments elucidated that receptor subunits are not independent but interacting with each other in a cooperative manner. The type of cooperativity, however, depended on the type and concentrations of allosteric/competing ligands. Based on our results, in my thesis we propose an allosteric model for ligand-receptor interactions in P2X receptors. When simulated, the model could replicate our experimental findings thus, further validating our model. Further, correlation between occupancy of P2X1 receptors (determined using binding curve for Alexa-ATP) with the steady-state desensitization suggests that binding of three agonist molecules per receptor are required to desensitize P2X1 receptors. We further extended the approach of fluorescence with electrophysiological measurement to assign the role for different domains in P2X1 receptors with the help of environmental sensitive, cysteine reactive fluorophore (TMRM). Cysteine rich domain-1 of P2X1 receptors (C117-C165) was found to be involved in structural rearrangements after agonist and antagonist binding. In contrast to the present understanding, that the binding of an antagonist cannot induce desensitization in P2X1 receptors and the receptors need to open first before undergoing desensitization, we propose based on our results that a competitive antagonist can also induce desensitization in P2X1 receptors by bypassing the open state. We have attempted to answer few intriguing questions in the field of P2X receptor research and we think that our answers provide many avenues to the basic understanding of functioning of P2X receptors.
Introduction: Immune paralysis with massive T-cell apoptosis is a central pathogenic event during sepsis and correlates with septic patient mortality. Previous observations implied a crucial role of peroxisome proliferator-activated receptor gamma (PPARγ) during T-cell apoptosis.
Methods: To elucidate mechanisms of PPARγ-induced T-cell depletion, we used an endotoxin model as well as the caecal ligation and puncture sepsis model to imitate septic conditions in wild-type versus conditional PPARγ knockout (KO) mice.
Results: PPARγ KO mice showed a marked survival advantage compared with control mice. Their T cells were substantially protected against sepsis-induced death and showed a significantly higher expression of the pro-survival factor IL-2. Since PPARγ is described to repress nuclear factor of activated T cells (NFAT) transactivation and concomitant IL-2 expression, we propose inhibition of NFAT as the underlying mechanism allowing T-cell apoptosis. Corroborating our hypothesis, we observed up-regulation of the pro-apoptotic protein BIM and downregulation of the anti-apoptotic protein Bcl-2 in control mice, which are downstream effector proteins of IL-2 receptor signaling. Application of a neutralizing anti-IL-2 antibody reversed the pro-survival effect of PPARγ-deficient T cells and confirmed IL-2-dependent apoptosis during sepsis.
Conclusion: Apparently antagonizing PPARγ in T cells might improve their survival during sepsis, which concomitantly enhances defence mechanisms and possibly provokes an increased survival of septic patients.
Na+/H+ antiporters are ubiquitous membrane proteins involved in ion homeostasis and pH sensing. The amino acid sequence of one such antiporter, MjNhaP1, from Methanococcus jannaschii, shows a significant homology to eukaryotic sodium proton exchangers like NHE1 from Homo sapiens and SOS1 of Arabidopsis thaliana than to the well-characterized Escherichia coli NhaA or NhaB. MjNhaP1 shows activity at acidic pH unlike NhaA, which is active at basic pH. 13 transmembrane helices have been predicted to be present in NhaP1. A projection map, calculated by Cryo-EM of 2D crystals of MjNhaP1 grown at pH 4, showed it to be a dimer containing elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core (Vinothkumar et al., 2005). Incubation of 2D crystals at pH 8 on the EM grid resulted in well-defined conformational changes, clearly evident in a difference map as a major change in density distribution within the helix bundle (Vinothkumar et al., 2005). The aim of this dissertation is to understand the working mechanism of MjNhaP1 by determining its three-dimensional structure. The aim was initially approached by structure determination by X-ray crystallography. The limitation for this method was the low expression yield, which was 0.5–0.7mg/ml (Vinothkumar et al., 2005). After various optimization trials, the expression yield of the recombinant protein could be elevated to 2-2.5mg of pure protein per litre of culture by the method of autoinduction (Studier et al., 2005). To obtain well diffracting 3D crystals, purification conditions (Vinothkumar et al., 2005) were modified. 3D crystals were obtained under various conditions, which has so far not diffracted X-Ray beyond 8Å. Parallely, optimization of parameters (Vinothkumar et al., 2005) for 2D crystals formation was carried out. A combination of 1% DDM used for lipid solubilization, and 1% OG in the buffer of the purified protein produced 1-2 μm wide tubular 2D crystals of NhaP1. This batch of crystal proved to be the optimal for data collection at higher tilt angle with the electron microscope. A 3D map showed p22121 symmetry and revealed a tight dimer with an oval shape. The region in the central part of the dimer is composed of several tilted helices forming an interface between both monomers. On either side of the dimer interface, a group of six tightly packed helices form a bundle. This bundle contains three straight helices in the centre of the monomer and three helices in the periphery. Comparison of the structures of E.coli NhaA and M. jannaschii NhaP1 show substantial differences in length and slope of corresponding helices between both antiporters. A 3D model of NhaP1 based on the 3D map revealed 13 helices, which has been named as A-M to distinguish it from the NhaA helices. Overlaying the X-ray structure onto the 3D map revealed that the disrupted helices IV and XI of NhaA superimpose two central helices at similar position in the 3D map of NhaP1. The disrupted helices IV and XI in the X-ray structure of NhaA have been proposed as the putative ion-binding and translocation site (Hunte C et al, 2005; Arkin IT et al, 2007; Screpanti & Hunte (2007). This motif appears to be present also in NhaP1, as suggested by the close fit of NhaA helices IV and XI on the putative helices E and L of the NhaP1 model. These two putative helices E and L in NhaP1 contain the highly conserved TDP and GPRVVP motif, which are crucial for antiporter activity (Hellmer et al., 2002, Hellmer et al., 2003). In the overlay, helix V of NhaA containing the two essential, conserved aspartates D163 and D164 fits the density of the putative helix F of NhaP1, which contains the conserved motif FNDP. The homologous D161 in the FNDP motif of NhaP1 is essential for transport activity as show by mutagenesis (Hellmer at al., 2003). Significant differences are visible in the region of the dimer interface of the 3D map of NhaP1 occupied by helices VI, VII, and VIII in NhaA. This region shows an extra helical density (A) in the 3D map of NhaP1. By alignment of MjNhaP1 sequence with the amino acid sequences of several Na+/H+ exchangers, it was evident that the additional helix (A) is located in the N terminus of NhaP1. In our sequence alignment, a putative hydrophobic segment corresponding to this additional helix A is present in other archaeal and eukaryotic antiporters but not in any of the bacterial ones. The N-terminus of the human Na+/H+ exchanger NHE1 has been predicted to contain a highly hydrophobic signal peptide. This indicates the probability of the N-terminal helix A of NhaP1 to be an uncleaved signal peptide. Besides being a signal sequence targeting NhaP1 to the membrane, the map suggests that this helix might be involved in the formation of dimer contacts between both monomers. A gene duplication event is evident in the 3D map of NhaP1, as not only the helices D, E, F and K, L, M are related by an inverted repeat but also the helices B, C and I, J are related. We present here the three-dimensional architecture of a Na+/H+ antiporter from archaea. The presence of the 13th helix suggests the location of the N-terminus to be located in the cytosol and the C-terminus in the periplasm. This would orient NhaP1 in an inverted manner in the membrane in comparison to NhaA. Further structural information at higher resolution and biochemical and biophysical investigations are required to confirm the topology.
Die vorliegende Arbeit ist aus drei Teilen aufgebaut. Im ersten, relativ kurz gehaltenen Kapitel wird die klassische Standard-Industrie-Solarzelle auf der Basis monokristallinen Siliziums vorgestellt. Der bisherige Herstellungsprozess der Standard-Industrie-Solarzelle, der in wesentlichen Teilen darauf abzielt, diese Verluste zu minimieren, dient als Referenz für die Entwicklung neuer Fertigungsverfahren, wie sie in den Kapiteln 2 und 3 dieser Arbeit vorgestellt werden. Den ersten thematischen Schwerpunkt dieser Arbeit bildet die Entwicklung eines alternativen Wafering-Konzeptes zum Multi-Drahtsägen, der klassischen Technologie zur Fertigung von Silizium-Wafern. Die Basis des neuen, hier vorgestellten Wafering-Prozesses bildet das Laser-Micro-Jet-Verfahren (LMJTM). Dieses System besitzt eine Reihe von Vorteilen gegenüber klassischen „trockenen“ Laserverfahren. Das ursprünglich auf reinem, deionisiertem Wasser als Strahlmedium aufbauende System wurde im Rahmen dieser Arbeit so modifiziert, dass der Flüssigkeitsstrahl nunmehr nicht nur als flüssiger Lichtleiter dient, sondern gleichzeitig auch als Transportmedium für Ätzmittel, welche den thermischen Abtrag des Siliziums durch den Laserstrahl unterstützen. Ausgehend vom aus der Literatur bekannten chemischen Verhalten des Siliziums wurden 3 Ätzsysteme für Silizium vorgestellt. Dabei wurden Vor- und Nachteile für deren technischen Einsatz diskutiert. Den praktischen Teil dieses Arbeitspaketes bildete der Test zweier Ätzmedien im Experiment. Dabei konnte gezeigt werden, dass wasserfreie Strahlmedien basierend auf perfluorierten Lösemitteln mit bereits sehr geringen Zusätzen gasförmigen Chlors als Ätzmittel für Silizium wässrigen alkalischen Ätzsystemen jeder Konzentration prinzipiell überlegen sind- Parallel zur Evaluation des Einflusses der chemischen Beschaffenheit des Flüssigkeitsstrahls auf den Abtragsprozess fand auch eine Untersuchung verschiedener Prozessparametereinflüsse statt, etwa der Laserleistung, der Laserlichtwellenlänge, etc. Den zweiten thematischen Schwerpunkt der Arbeit bildet die Modifizierung der nasschemischen Schritte zwischen dem Wafering und dem ersten Hochtemperatur-Fertigungsschritt in der Solarzellen-Produktion, der Emitterdiffusion. Diese nasschemischen Schritte umfassen bei der Standard-Industrie-Solarzelle in der Regel eine zum Teil aufwändige Reinigung der Wafer-Oberflächen von partikulären und metallischen Kontaminationen, die vor allem vom Wafering-Prozess herrühren, als auch eine Texturierung der Substrate. Kernanliegen des praktischen Teils dieses Arbeitspaketes ist zum einen die Suche nach alternativen Texturmitteln zum 2-Propanol, dem klassischen Badadditiv in basischen Ätzbädern, das in der Praxis über zahlreiche Nachteile verfügt, etwa einem relativ niedrigen Siedepunkt, der zu seinem permanenten Ausgasen aus der Lösung führt. Zum anderen sollte der auf die Textur folgende Reinigungsprozess rationalisiert werden, um Prozesskosten zu minimieren, entweder durch eine Straffung des Prozesses durch Verringerung des Chemikalienverbrauchs und einer Reduzierung der Prozesszeit oder durch eine Verringerung der Chemikalienkosten. Bei der Suche nach neuen Texturmitteln wurden 45 verschiedene organische Substanzen verschiedener Verbindungsklassen hinsichtlich ihrer Texturwirkung auf monokristallinen Silizium-substraten getestet. Mit 1-Pentanol und p-Toluolsulfonsäure wurden zwei Substanzen ermittelt, welche in der Zukunft als praktikable Alternativen zu 2-Propanol als Texturadditive dienen könnten. Im Kontext der Suche nach neuen Reinigungsverfahren wurden eine Reihe verschiedener neuer Reinigungssequenzen getestet, die sich entweder durch veränderte - in der Regel verringerte - Badkonzentrationen, durch neue Badsequenzen, welche auf bestimmte Teilschritte verzichten oder durch neue Badkompositionen, etwa durch Hinzuziehen von Komplexbildnern für metallische Verunreinigungen von den klassischen Reinigungsprozessen unterscheiden. Der Erfolg des Reinigungseffektes der nasschemischen Sequenzen wurde anhand der Ladungsträger-Lebensdauer in den Wafern abgeschätzt. Dabei konnte gezeigt werden, dass mit Hilfe von LMJ produzierte (gelaserte) Wafer-Oberflächen wesentlich straffere Reinigungsprozesse erfordern als drahtgesägte Substrate. Neben einer deutlichen Straffung des Reinigungsprozesses ist auch eine Verkürzung der Texturzeit bei den mit Lasern geschnittenen Oberflächen möglich, die wiederum ihren Grund im geringeren Schädigungsgrad dieser Oberflächen hat, der einen geringeren Materialabtrag durch die Ätzbäder erfordert, als bei drahtgesägten Wafern. Abschließend konnte noch gezeigt werden, dass drahtgesägte Substrate, die bei gleicher Prozesszeit mit den neuen Texturmitteln prozessiert wurden, über erheblich höhere mechanische Stabilitäten verfügen, als jene, bei denen das klassische Texturmittel 2-Propanol eingesetzt wurde.
Die vorliegende Arbeit befasste sich in erster Linie mit der Regulation des P2X2 Rezeptors (P2X2R) durch Phosphoinositide (PI). P2X Rezeptoren sind durch extrazelluläres ATP aktivierte Kationenkanäle, die ubiquitär unter Vertebraten, v. a. im zentralen wie peripheren Nervensystem exprimiert werden. Bis heute sind 7 verschiedene Untereinheiten dieser Rezeptorfamilie bekannt, die nach homo- oder heterotrimerer Assemblierung unterschiedliche funktionelle Phänotypen ausbilden. Die P2X Rezeptoren sind an einer Vielzahl von physiologischen und pathophysiologischen Prozessen beteiligt. Für ihre Beteiligung am zellulären Signalgeschehen wurde in der Vergangenheit der Begriff der purinergen Signaltransduktion geprägt. PI4,5P2 ist ein zelluläres, an der Innenseite der Plasmamembran verankertes Phospholipid, dem zahlreiche, essentielle Funktionen zukommen. Dass es auch Signalfunktion besitzen kann, wurde erst spät (1980) bekannt; dass es darüber hinaus zudem membranäre Transportsysteme reguliert, konnte erst in den letzten Jahren gezeigt werden. Die ersten Kanäle, für die eine Phosphoniositid (PI)-Beeinflussung nachgewiesen wurde, waren die einwärts gleichrichtenden K+-Kanäle. 2006 wurden die ersten vorläufigen Hinweise publiziert, dass auch die Kanalfunktion der P2X Rezeptoren durch Phosphoinositide beeinflusst werden kann. Darauf aufbauend wurde in der vorliegenden Arbeit der P2X2R nach Expression in Xenopus Oozyten elektrophysiologisch auf eine mögliche Regulation durch PIPns untersucht. Um die in der Oozyte vorliegenden PI-Level gezielt während der Messung ändern zu können, wurde die spannungsgesteuerte Phosphoinositid-Phosphatase Ci-VSP coexprimiert. Ci-VSP, die der PTEN-Phosphatase strukturell sehr ähnlich ist, wurde 2005 aus der Schlauchascidie Ciona intestinalis kloniert. In der veröffentlichten Klonierungsarbeit wurde bereits gezeigt, dass Ci-VSP in der Lage ist, bekannte PI4,5P2-sensitive Membrankanäle, wie z. B. bestimmte K+-Kanäle, spannungsabhängig zu inhibieren. Es konnte in TEVC-Experimenten gezeigt werden, dass die durch Depolarisation induzierte Aktivierung dieser Phosphatase den P2X2 Rezeptorstrom in seiner Desensibilisierung sowohl beschleunigt als auch verstärkt. Dieser Effekt war spannungsabhängig und nahm mit höherer Depolarisation zu. Die ermittelte Spannungsabhängigkeit stimmte dabei mit dem sensitiven Potentialbereich der spannungsgesteuerten Ci-VSP-Domäne, gemessen an ihren gating-Strömen, überein. Der „Ci-VSP-Effekt“ auf den P2X Rezeptor konnte nur in Anwesenheit von ATP, d.h. bei aktiviertem Rezeptor, beobachtet werden. Wurden die Oozyten mit Wortmannin, einem PI4-Kinase(PI4K)-Inhibitor, behandelt, zeigte sich eine vergleichbare Veränderung des Rezeptorstroms. Eine PI4K-Inhibition zielt demnach offensichtlich auf die gleichen Regulationsmechanismen wie die Ci-VSP-Aktivierung. In weiterführenden zellfreien Patch Clamp-Messungen an Oozytenmembranen wurden sowohl Einzelkanal- als auch makroskopische Ströme des P2X2R unter Einfluss verschiedener, intrazellulär verabreichter PIs und PI-beeinflussender Enzyme untersucht. Einzig die Zugabe von PI4,5P2 hatte einen deutlich aktivierenden Einfluss auf den makroskopischen Rezeptorstrom, andere getestete PIs (wie auch PI3-Kinase und PTEN-Phosphatase) zeigten keinerlei Wirkung. Vergleichbare Ergebnisse konnten in vorläufigen Einzelkanal-Messungen an diesem Rezeptor Subtyp beobachtet werden. Da die PI4-Kinase offensichtlich an der beobachteten Beeinflussung der P2X2R Desensibilisierung beteiligt ist, wurde die P2X2-Rezeptorsequenz auf potentielle - über sogenannte SH3-Epitope vermittelte - PI4K-Interaktionsbereiche hin untersucht. Diese SH3-Epitope kommen in vielen zellulären Proteinen vor, um Protein-Protein-Interaktionen zu vermitteln. Nach Sequenzanalyse des maßgeblich am Desensibilisierungsgeschehen beteiligten C-Terminus des P2X2R konnte im distalen Teil ein SH3-Bindungsmotiv lokalisiert werden, das daraufhin durch gerichtete Mutagenese (P2X2-P451A/P454A) unwirksam gemacht wurde. Dieser mutierte Rezeptor verhielt sich in seiner Desensibilisierung wie der Wildtyp nach Wortmannin-Behandlung, zeigte also eine intrinsisch verstärkte Desensibilisierung. Eine Wortmannin-Behandlung der Oozyten, die den mutierten Rezeptor exprimierten, führte hingegen zu keiner weiteren Beeinflussung des Rezeptorstroms. Somit konnte letztlich der Schluss gezogen werden, dass die PI4K, und das mit ihr in direkter Verbindung stehende PI4,5P2, einen maßgeblichen Einfluss auf das Desensibilisierungsverhalten des P2X2R hat. Auf Basis der erarbeiteten Befunde wurde ein kinetisches Reaktionsmodell des P2X2R erstellt, das bisher aufgestellte Modelle mit den Ergebnissen dieser Arbeit vereint, aber auch in teilweisem Gegensatz zu dem von FUJIWARA & KUBO [2006] steht. Des Weiteren wurde im Verlauf dieser Arbeit die reversible Inhibition des P2X2R durch eine Reihe von Aminoglykosid-Antibiotika untersucht. Durch Analyse der Dosis-Wirkungs-Beziehungen, der Spannungs- sowie wie ATP-Konzentrations-Abhängigkeit der Inhibition konnte gezeigt werden, dass es sich dabei um einen nicht-kompetitiven open pore block handelte. Durch weiterführende Untersuchungen an einer nicht-desensibilisierenden P2X2/1 Rezeptorchimäre wurde gezeigt, dass eine Aminoglykosid-Inhibition die ATP-Dissoziation von der Rezeptorbindungsstelle signifikant verlangsamte. Dieser Befund deutet auf eine im Vergleich zum geschlossenen Zustand erhöhte Affinität des offenen Zustands für ATP hin. Neben den hier untersuchten Aminglykosiden sind bislang keine weiteren Substanzklassen bekannt, die den P2X2R durch einen derartigen Mechanismus hemmen.
The transcription factor p63 is part of the p53 protein family, which consists of three members, p53, p63 and p73. P63 shares structural similarity with all family members, but is associated to different biological functions than p53 or p73. While p53 is mainly linked to tumor suppression and p73 is connected with neuronal development, p63 has been connected to critical biological roles within ectodermal development and skin stem cell biology as well as supervision of the genetic stability of oocytes. Due to its gene structure p63 is expressed as at least six different isoforms, three of them containing a N-terminal transactivation domain. The isoforms that are of biological relevance both have a C-terminal inhibitory domain that negatively regulates the transcriptional activity. This inhibitory domain is supposed to contain two individual components of which one is internally binding and masking the transactivation domain while the other one can be sumoylated. To further investigate this domain a mutational analysis with the help of transactivation assays in SAOS2 cells was carried out to identify the critical amino acids within the inhibitory domain and the impact on transcriptional activity of TAp63alpha, the p63-isoform which is essential for the integrity of the female germline. The results of these experiments show that a stretch of approximately 13 amino acids seems to be important for the regulation of transcriptional activity in TAp63alpha, due to the increased transcriptional activity occurring in this region after mutation. Additional experiments showed that this mechanism is distinct from sumoylation, which seems to have only implications for the intracellular level of TAp63alpha. As a conclusion, the C-terminus of the Tap63alpha is essential for two different mechanisms, which control the transcriptional activity of the protein. Both regulatory elements are independent from each other and can now be restricted to certain amino acids. Activation of the wild type protein might take place in the identified region via post-translational modification. Furthermore an inhibition assay was carried out to test if the same region might have implications on the second biological relevant isoform deltaNp63alpha. The results show that the same amino acids which show an impact on transcriptional activity in Tap63alpha lead to a significant change in functional behaviour of deltaNp63alpha. There is a possibility that both proteins are regulated with opposite effects via the same mechanisms, based at the C-terminus of the p63alpha-isoforms. In both cases a modification of these residues could lead to a more opened conformation of the protein with consequences on promoter binding, which can be even important for deltaNp63alpha with respect to promoter squelching. Both alpha-isoforms seem to be regulated via the C-terminus and to elucidate if that is also the case for TAp63gamma a deletion analysis was carried out. The results show that there are also amino acids within the C-terminus of TAp63gamma, which have implications on the transcriptional activity of the protein. Therefore the C-terminus seems to play a major role for regulation of diverse p63 isoforms.