Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
The main subject of this thesis is the study of hadron and photon production in relativistic heavy-ion collisions by means of hydrodynamics+transport approaches. Two different kinds of such hybrid approaches are employed in this work, the SMASH-vHLLE-hybrid and a MUSIC+SMASH hybrid. While the former is capable of simulating heavy-ion collisions covering a wide range of collision energies down to √s = 4.3 GeV, reproducing the correct baryon stopping powers, the latter provides a framework to consistently model photon production in the hadronic stage of high-energy heavy-ion collisions.
The SMASH-vHLLE-hybrid is a novel state-of-the-art hybrid approach whose development constitutes a major contribution to this thesis. It couples the hadronic transport SMASH to the 3+1D viscous hydrodynamics approach vHLLE. Therein, SMASH is employed to provide the fluctuating 3D initial conditions and to model the late hadronic rescattering stage, and vHLLE for the fluid dynamical evolution of the hot and dense fireball. The initial conditions are provided on a hypersurface of constant proper time, and the macroscopic evolution of the fireball is carried out down to an energy density of ecrit = 0.5 GeV/fm3, where particlization occurs. Consistency at the interfaces is verified in view of global, on-average quantum number conservation and the SMASH-vHLLE-hybrid is validated by comparison to SMASH+CLVisc as well as UrQMD+vHLLE hybrid approaches. The establishment of the SMASH-vHLLE-hybrid to theoretically describe heavy-ion collisions at intermediate and high collision energies forms a basis for a range of extensions and future research projects. It is further made available to the heavy-ion community by virtue of being published on Github.
The SMASH-vHLLE-hybrid is applied to simulate Au+Au/Pb+Pb collisions between √s = 4.3 GeV and √s = 200.0 GeV. A good agreement with the experimentally measured rapidity and transverse mass spectra is obtained. In particular the baryon stopping dynamics are well reproduced at low, intermediate, and high collision energies. Excitation functions for the mid-rapidity yield and mean transverse momentum of pions, protons and kaons are demonstrated to agree well with their experimentally measured counterpart. These results further validate the approach and provide a solid baseline for potential future studies. The importance of annihilations and regenerations of protons and anti-protons is additionally investigated in Au+Au/Pb+Pb collisions between √s = 17.3 GeV and √s = 5.02 TeV with the SMASH-vHLLE-hybrid. It is found that, regarding the p + p ̄ ↔ 5 π reaction, 20-50% (depending on the rapidity range) of the (anti-)proton yield lost to annihila- tions in the hadronic rescattering stage is restored owing to the back reaction. The back reaction thus constitutes a non-negligible contribution to the final (anti-)proton yield and should not be neglected when modelling the late rescattering stage of heavy-ion collisions.
The MUSIC+SMASH hybrid is a hybrid approach ideally suited to model the production of photons in relativistic heavy-ion collisions. Therein, the macroscopic production of photons in the hadronic stage in MUSIC relies on the identical effective field theories as the photon cross sections implemented in SMASH for the microscopic production. The MUSIC+SMASH hybrid thus provides the first consistent framework to the end of hadronic photon production. It accounts for 2 → 2 scattering processes of the kind π + ρ → π + γ and pion bremsstrahlung processes π + π → π + π + γ. The MUSIC+SMASH hybrid is employed in an ideal 2D setup to systematically assess the importance of non-equliibrium dynamics in the hadronic rescattering stage on mid-rapidity transverse momentum spectra and elliptic flow of photons at RHIC/LHC energies. This is achieved by comparing the outcome of the MUSIC+SMASH hybrid, involving an out-of-equilibrium late rescattering stage, to macroscopically approximating late stage photon production by means of MUSIC, employed down to temperatures well below the switching temperature. It is found that non-equilibrium dynamics have only minor implications for photon transverse momentum spectra, but significantly enhance the photon elliptic flow. At RHIC energies, an enhancement of up to 70%, and at LHC of up to 65% is observed in the non-equilibrium afterburner as compared to its hydrodynamical counterpart. In combination with the large amount of photons produced above the particlization temperature, these differences are modest regarding the transverse momentum spectra, but a significant enhancement of the elliptic flow is observed at low transverse momenta. Below pT ≈ 1.4 GeV, the combined v2 is enhanced by up to 30% at RHIC, and up to 20% at the LHC within the non-equilibrium setup as compared to its approximation via hydrodynamics. Non-equilibrium dynamics in the hadronic rescattering stage are hence important, especially in view of momentum anisotropies at low transverse momenta. These findings thus contribute to the understanding of low-pT photons produced in heavy-ion collisions at RHIC/LHC energies and the MUSIC+SMASH hybrid employed for this study provides a baseline for additional studies regarding photon production in the future.
To summarize, the approaches and frameworks presented in this thesis provide a good baseline for further extensions and studies in order to improve the understanding of hadron and photon production in relativistic heavy-ion collisions across a wide range of collision energies. More broadly, such future studies of hadrons and photons may contribute to enhance the understandig of the properties of the fundamental building blocks of matter, of which everything that surrounds us is made of.
The putative effects of dark matter are most easily explained by a collisionless fluid on cosmological scales and by Modified Newtonian Dynamics (MOND) on galactic scales. Hybrid MOND dark matter models combine the successes of dark matter on cosmological scales and those of MOND on galactic scales. An example of such a model is superfluid dark matter (SFDM) which postulates that this differing behavior with scale is caused by a single underlying substance with two phases. In this thesis, I highlight successful observational tests of SFDM regarding strong lensing and the Milky Way rotation curve. I also discuss three problems due to the double role of the aforementioned single underlying substance and show how these may be avoided. Finally, I introduce a novel Cherenkov radiation constraint for hybrid MOND dark matter models. This constraint is different from standard modified gravity Cherenkov radiation constraints because such hybrid models allow even non-relativistic objects like stars to emit Cherenkov radiation.
Das Feld der Hochenergie-Schwerionenforschung hat sich der Untersuchung des Quark-Gluon-Plasmas (QGP) gewidmet. Ein QGP ist ein sehr heißer und dichter Materiezustand, der kurz nach dem Urknall für einige Mikrosekunden das Universum füllte. Unter diesen extremen Bedingungen sind die fundamentalen Bausteine der Materie, die Quarks und Gluonen, quasi frei, also nicht in Hadronen eingeschlossen, wie es unter normalen Bedingungen der Fall ist. Hadronen sind Teilchen, die aus Quarks und Gluonen bestehen. Die bekanntesten Hadronen sind Protonen und Neutronen, die Bestandteile von Atomkernen, aus denen, zusammen mit Elektronen, die gesamte bekannte Materie aufgebaut ist.
Um ein QGP im Labor zu erzeugen, lässt man ultrarelativistische schwere Ionen, wie zum Beispiel Pb-208-Kerne, aufeinander prallen. Dies geschieht am CERN, dem größten Kernforschungszentrum der Welt. Der Teilchenbeschleuniger, welcher Protonen und Pb-Kerne beschleunigt und zur Kollision bringt, heißt Large Hadron Collider (LHC) und ist mit 27 km Umfang der größte der Welt. Bei einer einzigen Pb-Pb Kollision am LHC werden mehrere Tausend Teilchen und Antiteilchen erzeugt. Das dedizierte Experiment zur Untersuchung von Schwerionenkollisionen am LHC ist ALICE. ALICE ist mit mehreren Teilchendetektoren ausgerüstet, die es ermöglichen, tausende Teilchen gleichzeitig zu messen und zu identifizieren.
Unter den produzierten Teilchen befinden sich auch leichte Atomkerne, wenngleich diese nur sehr selten erzeugt werden. Die Anzahl der produzierten Teilchen pro Teilchensorte hängt nämlich von deren Masse ab. In Pb-Pb Kollisionen am LHC sinkt die Anzahl der produzierten (Anti)kerne exponentiell um einen Faktor 1/330 bei Hinzufügen jedes weiteren Nukleons. Die Menge an produzierten Teilchen pro Spezies stellt Informationen über den Produktionsmechanismus beim Übergang vom QGP zum Hadrongas zur Verfügung. Hierbei sind leichte (Anti)kerne von besonderem Interesse, da sie vergleichsweise groß sind und ihre Bindungsenergie bis zu zwei Größenordnungen kleiner ist als die Temperaturen, die bei der Erzeugung der Hadronen vorherrschen. Es ist bis heute noch nicht verstanden, wie leichte (Anti)kerne bei diesen Bedingungen erzeugt werden und überleben können.
Für diese Arbeit wurden ca. 270 Millionen Pb-Pb Kollisionen bei einer Schwerpunktsenergie von 5,02 TeV, die von ALICE im November 2018 aufgezeichnet wurden, analysiert. Es wurde die Produktion von (Anti)triton und (Anti)alpha untersucht. Wegen ihrer großen Masse werden beide Kerne sehr selten produziert, bei weitem nicht bei jeder Kollision. Antialpha ist der schwerste Antikern, der jemals gemessen wurde. Aufgrund dieser Seltenheit ist die Größe des zur Verfügung stehenden Datensatzes entscheidend. Es war möglich, das erste jemals gemessene Antialpha-Transversalimpulsspektrum zu extrahieren. Auch für (Anti)triton und Alpha wurden Transversalimpulsspektren bestimmt.
Die Ergebnisse wurden mit theoretischen Modellen und anderen ALICE Messungen verglichen.
Am Ende wird in einem Ausblick auf das kürzlich durchgeführte Upgrade der ALICE Spurendriftkammer (TPC) eingegangen. In der nächsten, bald startenden Datennahmeperiode wird der LHC seine Kollisionsrate erheblich erhöhen, was es ermöglichen wird, mehr als 100 mal so viele Daten wie bisher aufzuzeichnen. Hiervon werden die in dieser Arbeit beschriebenen (Anti)triton- und (Anti)alpha-Analysen beachtlich profitieren. Um mit den erheblich höheren Kollisionsraten zurecht zu kommen, mussten einige Detektoren, unter anderem die TPC, maßgeblich erneuert werden. In den ersten beiden Datennahmeperioden wurde die TPC mit Vieldrahtproportionalkammern betrieben. Diese sind allerdings viel zu langsam für die geplanten Kollisionsraten. Deshalb wurden sie im Jahr 2019, während einer langen Betriebspause des LHC, durch Quadrupel-GEM (Gas Electron Multiplier) Folien basierte Auslesekammern ersetzt, welche eine kontinuierliche Auslese der TPC ermöglichen. Da es sich um die erste jemals gebaute GEM TPC im Großformat handelt, war ein umfangreiches Forschungs- und Entwicklungs- (F&E) Programm notwendig, um die GEM Auslesekammern zu charakterisieren und zu testen. Im Rahmen dieses F&E Programms wurden am Anfang dieser Promotion systematische Messungen an einer kleinen Test TPC mit Quadrupel-GEM Auslese, die extra zu diesem Zweck gebaut worden war, durchgeführt. Hierbei wurde der Rückfluss der bei der Gasverstärkung erzeugten Ionen in das Driftvolumen der TPC und die Energieauflösung mit verschiedenen GEM Folien Typen und unterschiedlicher Anordnung gemessen. Das Ziel war, möglichst kleine Ionenrückflüsse bei möglichst guter Energieauflösung zu erreichen. Hierbei musste ein Kompromiss gefunden werden, da die beiden Größen sich gegenläufig verhalten. Es war jedoch möglich, mit mehreren GEM Konfigurationen Spannungseinstellungen zu identifizieren, bei denen beide Größen den gewünschten Anforderungen entsprachen.
Die Entstehung der Elemente im Universum wird auf eine Vielzahl von Prozessen zurückgeführt, die sowohl in Urknall - als auch in stellaren Szenarien angesiedelt werden. Die Kenntnis der dort ablaufenden Reaktionen und deren Raten ermöglicht es die zugrundeliegenden Modelle einzugrenzen und somit genauere Aussagen über die Plausibilität der Szenarien zu treffen. Ein Teil dieser Prozesse stützt sich auf Neutroneneinfänge an Atomkernen, wodurch die Massezahl des Ausgangskerns erhöht wird.
Die Aktivierungsmethode ermöglicht die Bestimmung der Wahrscheinlichkeit eines Neutroneneinfangs, sofern der Zielkern eine detektierbare Radioaktivität aufweist. Die experimentelle Untersuchung einer Reaktion mit einem kurzlebigen Produktkern ist eine besondere Herausforderung, da bei langen Aktivierungen zwar viele Einfänge stattfinden, die meisten Produktkerne jedoch schon während der Aktivierung zerfallen. Ein probates Mittel um genügend Zerfälle des Produktkerns beobachten zu können ist die zyklische Aktivierung, wobei die Probe in mehrfachen Wiederholungen kurz bestrahlt und ausgezählt wird.
Im Rahmen dieser Arbeit wurden zwei verschiedene Anwendungen der zyklischen Aktivierung behandelt.
Eine vom Paul Scherrer Institut Villigen bereitgestellte Probe von 10Be wurde am TRIGA Reaktor der Johannes Gutenberg - Universität Mainz mit Neutronen aktiviert. Über die Cadmiumdifferenzmethode konnte der thermische und der epithermische Anteil der Neutronen separiert werden und dadurch sowohl der thermische Wirkungsquerschnitt als auch das Resonanzintegral für die Reaktion 10Be(n,γ)11Be bestimmt werden.
Am Institut für Kernphysik der Goethe Universität Frankfurt wurde mit einem Van - de - Graaff - Beschleuniger über die 7Li(p,n)7Be Reaktion ein quasistellares Neutronenspektrum mit kBT ≈ 25 keV erzeugt. Für die zyklische Aktivierung von Proben wurde die Infrastruktur in Form einer automatisiert ablaufenden Vorrichtung zur Bestrahlung und Auszählung geplant und umgesetzt. In diesem Rahmen wurden die über das Spektrum gemittelten Neutroneneinfangsquerschnitte für verschiedene Reaktionen bestimmt. Für 19F(n,γ)20F konnte der Gesamteinfangsquerschnitt bestimmt werden. Für die Reaktion 45Sc(n,γ)46Sc wurde der partielle Wirkungsquerschnitt in den 142,5 keV Isomerzustand gemessen. Aus der 115In(n,γ)116In Reaktion konnten die partiellen Querschnitte in die Isomerzustände bei 289,7 keV, 127,3 keV sowie den Grundzustand bestimmt werden.
Außerdem wurde mit einer Hafniumprobe die partiellen Einfangsquerschnitte in den 1147,4 keV Isomerzustand von 178Hf und in den 375 keV Isomerzustand von 179Hf gemessen.
Ionenstrahlen werden in der Grundlagenforschung, in der Industrie und der Medizin verwendet. Um die Teilchen für die jeweiligen Anforderungen nutzbar zu machen, werden sie mit Ionenbeschleunigern je nach Anwendung auf eine bestimmte Energie beschleunigt. Eine Beschleunigeranlage besteht dabei aus einer Reihe von unterschiedlichen Elementen: Ionenquellen, Linearbeschleuniger, Kreisbeschleuniger, Fokussierelemente, Diagnosesysteme usw. In jeder dieser Kategorien gibt es wiederum verschiedene Realisierungsmöglichkeiten, je nach Anforderung des jeweiligen Abschnitts und der gesamten Anlage. Im Bereich der Linearbeschleuniger ist als Bindeglied zwischen Ionenquelle/Niederenergiebereich und Nachfolgebeschleuniger der Radiofrequenzquadrupol (RFQ) weit verbreitet. Dieser kann den aus der Quelle kommenden Gleichstromstrahl in Teilchenpakete (Bunche) formen und diese gleichzeitig auf die nächste Beschleunigerstufe angepasst vorbeschleunigen. Desweiteren wird der Teilchenstrahl innerhalb des RFQ kontinuierlich fokussiert, wodurch insbesondere bei diesen niedrigen Energien Strahlverluste minimiert werden. Bei hohem Masse-zu-Ladungs-Verhältnis wird für schwere Ionen eine niedrige Resonanzfrequenz von deutlich unter 100 MHz benötigt. Dies führt zu längeren Beschleunigungszellen entlang der Elektroden, womit durch eine bessere Fokussierung auch höhere Strahlströme beschleunigt werden können. Im Allgemeinen bedeutet eine niedrigere Resonanzfrequenz aber auch einen größeren Querschnitt der Resonanzstruktur sowie einen längeren Beschleuniger. Gegenstand dieser Arbeit ist die Untersuchung unterschiedlicher RFQ-Strukturen für niedrige Frequenzen, wie sie beispielsweise im Linearbeschleunigerbereich der Gesellschaft für Schwerionenforschung (GSI) in Darmstadt Anwendung finden. Zunächst wird die Beschleunigeranlage des GSI Helmholtzzentrums für Schwerionenforschung in Darmstadt und dessen zur Zeit im Bau befindliche Erweiterung FAIR (Facility for Antiproton and Ion Research) kurz vorgestellt. Teil dieser Anlage ist der Hochstrominjektor genannte Anfangsbeschleuniger, der wiederum aus einem RFQ und zwei nachfolgenden Driftröhrenbeschleunigern besteht. Dieser Hochstrominjektor dient als Referenz für die vorliegende Arbeit. In Kapitel 3 wird kurz auf Linearbeschleuniger im Allgemeinen und auf das Grundprinzip und die Eigenschaften eines RFQ näher eingegangen. Anschließend werden verschiedene RFQ-Strukturkonzepte vorgestellt und die Strahldynamik in einem RFQ sowie charakteristische Resonatorgrößen beschrieben. Ausgangspunkt ist der aktuelle RFQ des Hochstrominjektors (Kapitel 4). Dieser IH-RFQ mit einer Betriebsfrequenz von 36 MHz ist seit vielen Jahren in Betrieb und soll für eine verbesserte Effizienz und Betriebssicherheit ein Upgrade erfahren. Dazu wurden Simulationen sowohl der bestehenden Struktur als auch mit Modifikationen durchgeführt und diese miteinander verglichen. Zur Entwicklung eines kompakten Resonators werden in Kapitel 5 verschiedene Splitring-RFQ-Modelle als Alternative zur IH-Struktur mittels Simulationen untersucht. Diese wurden für eine niedrigere Frequenz von 27 MHz entworfen, was der Frequenz des ursprünglichen Wideröe-Beschleunigers (Vorgänger des Hochstrominjektors HSI) entspricht und ebenso wie die 36 MHz des IH-RFQ eine Subharmonische der 108 MHz des Folgebeschleunigers ist. Abschließend wurde noch eine neue RFQ-Struktur, der Splitframe-RFQ, entworfen und untersucht. Auch dieser wurde für eine Frequenz von 27 MHz ausgelegt. Die Ergebnisse dieser Entwicklung, die eine Mischung aus einem Splitring- und einem klassischen 4-Rod-RFQ darstellt, befinden sich in Kapitel 6. Alle Feldsimulationen wurden mit dem Programm Microwave Studio von CST durchgeführt. Zusammenfassend werden die verschiedenen Konzepte anhand der charakteristischen Resonatorgrößen verglichen und ein Ausblick auf weiterführende Arbeiten gegeben.
The present work deals with photoionization in the realm of the absorption of one single photon. The formal treatment of one-photon ionization usually employs a semi-classical approach, where the electron’s initial and final states are described as quantum-mechanical wave functions but the photon is treated as a classical electromagnetic wave. In the calculation of photoionization cross sections with this semi-classical method, there is an often used approximation which is called the electric dipole approximation. Mathematically, the application of the dipole approximation corresponds to truncating the series expansion of an exponential after the leading term. Physically, this means neglecting the linear photon momentum and the spatial dependence of the light field. The dipole approximation is valid if the wavelength of the light is much larger than the spatial extent of the target and if the photon momentum is small compared to the momenta of the reaction products, which is generally the case for photon energies short above the electron binding energy.
For the present work, we experimentally investigated nondipolar photoionization, i.e., one-photon ionization at high photon energies where the dipole approximation breaks down. In our experiments, we irradiated single atoms and molecules with such high-energetic photons and measured the three-dimensional momentum distributions of the reaction fragments to uncover the effects of the linear photon momentum and the spatially-dependent light field on photoionization. Our observations allow the first profound insight into photoionization that reveals all photon properties, i.e., photon energy, spin, linear momentum, and the speed of light. Hopefully, our efforts make a constructive contribution to the understanding and the further exploration of light-matter interaction.
Topological phases set themselves apart from other phases since they cannot be understood in terms of the usual Landau theory of phase transitions. This fact, which is a consequence of the property that topological phase transitions can occur without breaking symmetries, is reflected in the complicated form of topological order parameters. While the mathematical classification of phases through homotopy theory is known, an intuition for the relation between phase transitions and changes to the physical system is largely inhibited by the general complexity.
In this thesis we aim to get back some of this intuition by studying the properties of the Chern number (a topological order parameter) in two scenarios. First, we investigate the effect of electronic correlations on topological phases in the Green's function formalism. By developing a statistical method that averages over all possible solutions of the manybody problem, we extract general statements about the shape of the phase diagram and investigate the stability of topological phases with respect to interactions. In addition, we find that in many topological models the local approximation, which is part of many standard methods for solving the manybody lattice model, is able to produce qualitatively correct phase transitions at low to intermediate correlations.
We then extend the statistical method to study the effect of the lattice, where we evaluate possible applications of standard machine learning techniques against our information theoretical approach. We define a measure for the information about particular topological phases encoded in individual lattice parameters, which allows us to construct a qualitative phase diagram that gives a more intuitive understanding of the topological phase.
Finally, we discuss possible applications of our method that could facilitate the discovery of new materials with topological properties.
An investigation of photoelectron angular distributions and circular dichroism of chiral molecules
(2021)
The present work demonstrates the capability of several type of molecular frame photoelectron angular distributions (MFPADs) and their linked chiroptical phenomenon the photoelectron circular dichroism (PECD) to map in great detail the molecular geometry of polyatomic chiral molecules as a function of photoelectron energy. To investigate the influence of the molecular potential on the MFPADs, two chiral molecules were selected, namely 2-(methyl)oxirane (C3H6O, MOx, m = 58,08 uma) and 2-(trifluoromethyl)oxirane (C3H3F3O, TFMOx, m = 112,03 uma). The two molecules differs in one substitutional group and share an oxirane group where the O(1s) electron was directly photoionized with the use of synchrotron radiation in the soft X-ray regime. The direct photoionization of the K-shell electron is well localized in the molecule and it induces the ejection of two or more electrons; the excited system separates into several charged (and eventually neutral) fragments which undergo Coulomb explosion due to their charges. The electrons and the fragments were detected using the COLd Target Recoil Ion Momentum Spectroscopy (COLTRIMS) and the momentum vectors calculated for each fragment belonging from a single ionization. The former method gives the possibility to post-orient molecules in space, giving access to the molecular frame, thus the MFPAD and its related PECD for multiple light propagation direction.
Stereochemistry (from the Greek στερεο- stereo- meaning solid) refers to chemistry in three dimensions. Since most molecules show a three-dimensional structure (3D), stereochemistry pervades all fields of chemistry and biology, and it is an essential point of view for the understanding of chemical structure, molecular dynamics and molecular reactions. The understanding of the chemistry of life is tightly bounded with major discoveries in stereochemistry, which triggered tremendous technical advancements, making it a flourishing field of research since its revolutionary introduction in late 18th century. In chemistry, chirality is a brunch of stereochemistry which focuses on objects with the peculiar geometrical property of not being superimposable to their mirror-images. The word chirality is derived from the Greek χειρ for “hand”, and the first use of this term in chemistry is usually attributed to Lord Kelvin who called during a lecture at the Oxford University Junior Scientific Club in 1893 “any geometrical figure, or group of points, “chiral”, and say that it has chirality if its image in a plane mirror, ideally realized, cannot be brought to coincide with itself.”. Although the latter is usually considered as the birth of the word chirality, the concept underlying it was already present in several fields of science (above all mathematics), already proving the already multidisciplinary relevance of chirality across many field of science and beyond. Nature shows great examples of chiral symmetry on all scales. Empirically, it is possible to observe it at macroscopic scale (e.g. distribution of rotations of galaxies), down to the microscopic scale (e.g. structure of some plankton species), but it is at the molecular level where the number gets remarkable: most of the pharmaceutical drugs, food fragrances, pheromones, enzymes, amino acids and DNA molecules, in fact, are chiral. Moreover, the concept of chirality goes far beyond the mere spatial symmetry of objects being crucially entangled with the fundamental properties of physical forces in nature. The symmetry breaking, namely the different physical behaviour of a two chiral systems upon the same stimuli, is considered to be one of the best explanation for the long standing questions of homochirality in biological life, and ultimately to the chemical origin of life on Earth as we know it. Our organism shows high enantio-selectivity towards specific compounds ranging from drugs, to fragrances. Over 800 odour molecules commonly used in food and fragrance industries have been identified as chiral and their enantiomeric forms are perceived to have very different smells, as the well-know example of D- and L- limonene. Similarly, responses to pharmaceuticals drugs can be enantiomer specific, and in fact about 60 % the drugs currently on the market are chiral compounds, and nearly 90 % of them are sold as racemates. The same degree of enantio-selectivity is observed in the communications systems of plants and insects. Plants produce lipophilic liquids with high vapour pressure called plant volatiles (PVs) which are synthesized via different enzymes called tarpene synthases that are usually chiral. Chiral molecules and chiral effects have a strong impact on all the fields of science with exciting developments ranging from stereo-selective synthesis based on heterogeneous enantioselective catalysis, to optoelctronics, to photochemical asymmetric synthesis, and chiral surface science, just to cite a few.
Chiral molecules come in two forms called enantiomers. Their almost identical chemical and physical properties continue to pose technical challenges concerning the resolution of racemic mixtures, the determination of the enantiomeric excess, and the direct determination of the absolute configuration of an enantiomer. ...
In this thesis we investigate the thermodynamic and dynamic properties of the D-dimensional quantum Heisenberg ferromagnet within the spin functional renormalization group (FRG); a
formalism describing the evolution of the system’s observables as the magnetic exchange inter-action is artificially deformed. Following an introduction providing a self contained summary of the conceptual and mathematical background, we present the spin FRG as developed by Krieg and Kopietz in references [1] and [2] in chapter two. Thereto, the generating functional of the imaginary time-spin correlation functions and its exact flow equation describing the deformation process of the exchange interaction are introduced. In addition, it is highlighted that - in contrast to conventional field-theoretic FRG approaches - the related Legendre trans-formed functional cannot be defined if the exchange interaction is initially switched off. Next, we show that this limitation can be circumvented within an alternativ hybrid approach, which treats transverse and longitudinal spin fluctuations differently. The relevant functionals are introduced and the relations of the corresponding functional Taylor coefficients with the spin correlation functions are discussed. Lastly, the associated flow equations are derived and the possibility of explicit or spontaneous symmetry breaking is taken into account.
In chapter three, we benchmark the hybrid formalism against a calculation of the thermo-dynamic properties of the one and two-dimensional Heisenberg model at low temperatures T and finite magnetic field H. For this purpose, we devise an anisotropic deformation scheme of the exchange interaction which allows for a controlled truncation of the infinite hierarchy of FRG flow equations. Thereby, contact with mean-field and spin-wave theory is made and the violation of the Mermin-Wagner theorem is discussed. To fulfill the latter, the truncation scheme is then complemented by a Ward identity relating the transverse self-energy and the magnetization. The resulting magnetization M (H, T ) and isothermal susceptibility χ(H, T ) are in quantitative agreement with the literature and the established behavior of the transverse correlation length and the zero-field susceptibility close to the critical point is qualitatively reproduced in the limit H → 0.
Finally, we investigate the longitudinal dynamics at low temperatures. To this end, the hierarchy of flow equations is solved within the same anisotropic deformation scheme complemented by an expansion in the inverse interaction range, and the resulting longitudinal dynamic structure factor is calculated within a low-momentum expansion. In D = 3, the large phase space accessible for the decay into transverse magnons yields only a broad hump centered at zero frequency whose width scales linearly in momentum. In contrast, at low temperatures and in a certain range of magnetic fields, a well-defined quasiparticle peak with linear dispersion emerges in D ≤ 2, which we identify as zero-magnon sound. Sound velocity and damping are discussed as a function of temperature and magnetic field, and the relevant momentum-frequency window is estimated and compared to the hydrodynamic
second-magnon regime.
The first part of this work addresses the automatic online tuning of transfer lines in particle accelerator facilities. In the second part the focus lies on the automatic construction and optimisation of such transport lines. It can be shown that genetic algorithms can be used very well for optimisation in both cases. Automatic online tuning can be performed very efficiently at accelerators under certain boundary conditions and is particularly well suited for initial beam commissioning with low intensity pilot beams. The construction of transfer lines can also be formulated and solved as an minimisation problem with an adopted parameterisation. Thereby, both the imaging properties of the beam transport and the robustness against error studies can be optimised at the same time.