Refine
Year of publication
Document Type
- Doctoral Thesis (596) (remove)
Has Fulltext
- yes (596)
Is part of the Bibliography
- no (596)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (596) (remove)
This thesis explores the phase diagrams of the Nambu--Jona-Lasinio (NJL) and quark-meson (QM) model in the mean-field approximation and beyond. The focus lies in the investigation of the interplay between inhomogeneous chiral condensates and two-flavor color superconductivity.
In the first part of this thesis, we study the NJL model with 2SC diquarks in the mean-field approximation and determine the dispersion relations for quasiparticle excitations for generic spatial modulations of the chiral condensate in the presence of a homogeneous 2SC-diquark condensate, provided that the dispersion relations in the absence of color superconductivity are known. We then compare two different Ansätze for the chiral order parameter, the chiral density wave (CDW) and the real-kink crystal (RKC). For both Ansätze we find for specific diquark couplings a so-called coexistence phase where both the inhomogeneous chiral condensate and the diquark condensate coexist. Increasing the diquark coupling disfavors the coexistence phase in favor of a pure diquark phase.
On the other hand, decreasing the diquark coupling favors the inhomogeneous phase over the coexistence phase.
In the second part of this thesis the functional renormalization group is employed to study the phase diagram of the quark-meson-diquark model. We observe that the region of the phase diagram found in previous studies, where the entropy density takes on unphysical negative values, vanishes when including diquark degrees of freedom. Furthermore, we perform a stability analysis of the homogeneous phase and compare the results with those of previous studies. We find that an increasing diquark coupling leads to a smaller region of instability as the 2SC phase extends to a smaller chemical potential. We also find a region where simultaneously an instability occurs and a non-vanishing diquark condensate forms, which is an indication of the existence of a coexistence phase in accordance with the results of the first part of this work.
Bohmian mechanics as formulated originally in 1952, has been useful in the implementation of numerical methods applied to quantum mechanics. The scientific community though has had ever since a critical thought about it. Therefore, there are still points to be clarified and rectified. The two main problems are basically: Bohmian mechanics gives a privilege role to the position representation. Secondly, the current interpretation of Bohmian trajectories has been recently proven wrong.
In this context, in Chapter 2, new complex Bohmian quantities are defined; so that they allow the capacity to formulate Bohmian mechanics in any arbitrary continuous representation, for instance, the momentum representation. This Chapter is fully based on two articles, regarding the proposed complex Bohmian formulation and its extension into momentum space.
Chapter 3 deals with a redefinition and reinterpretation of the Bohmian trajectories from the handling of the continuity equation, this is done without any need of additional postulates or interpretations. Also, it is proved that Bohmian mechanics is actually more than a projective aspect of the Wigner function.
As a third point, Chapter 4 presents a sytematic treatment of the hydrodynamic scheme of Bohmian mechanics. Then, a brief summary of the transport equations in Bohmian mechanics is done. Next, a unified hydrodynamic treatment is found for the Bohmian mechanics. This treatment is useful to sketch, a Bohmian treatment to efficiently find the steady value of the transmission integral.
In Chapter 5 conclusions of this thesis are drawn.
The realization of a fast and robust closed orbit feedback (COFB) system for the on-ramp orbit correction at SIS18 synchrotron of FAIR project is reported in this thesis. SIS18 has some peculiar behaviors including on-ramp optics variation, very short lengths of the ramps (200 ms to 1 s) and a cycle-to-cycle variation of beam parameters. The realized fast COFB system being robust against above mentioned features of SIS18 is a first of its kind and the course to its realization led to some novel contributions in the field of closed orbit correction. A new method relying on the discrete Fourier transform (DFT)-based decomposition of the orbit response matrix (ORM) has been introduced, exploiting the symmetry in the arrangement of beam position monitors (BPMs) and the corrector magnets in the synchrotrons. A nearest-circulant approximation has also been introduced for synchrotrons having slight deviation from the symmetry, making the method applicable to a vast majority of synchrotrons. Moreover, the performance and the stability analysis of COFB systems in the presence of ORM mismatch between the synchrotron and the feedback controller is presented. The COFB systems are divided into slow and fast regimes and a new stability criterion consistent with measurements, is introduced. The practicality of the criterion is verified experimentally at COSY Jülich and is used for the analysis of various sources of ORM mismatch at SIS18. The commissioning of the SIS18 COFB system is also reported in detail which relies on Libera Hadron as the main hardware resource for the controller implementation. The on-ramp orbit correction is demonstrated for the horizontal plane of SIS18, for the disturbance rejection up to 600 Hz.
The requirement of the versatile signal generator has always been evident in modern RF and communication systems. The most conventional technique, voltage control oscillator (VCO), has inferior phase noise and narrow bandwidth despite its operating frequency can be up to the sub-THz regime. Its phase noise influenced by a various parameter associated with the oscillator circuit e.g. transistor size \& noise, bias current, noise leaking from the bias supply etc. The bandwidth is limited because the input voltage \& the output frequency of the VCO is not strictly linear over the tuning range. The phase noise and SFDR of the VCO output are enhanced by using the phase-lock technique. The phase-locked loop (PLL) uses the feedback system locking the reference frequency set by the VCO. However, the settling time of the PLL is higher due to a feedback control loop. The higher settling time increases the frequency switching time between PLL outputs. IG-oscillators is suitable for multi-GHz range and wide bandwidth application. Signal generation can alos be achieved by the free-electron radiation, optical lasers, Gunn diodes as well and they can operate even at the THz domain. All these signal generators suffer from slow frequency switching, lack of digital controllability, and advance modulation capability even though their frequency of operation is THz regime. Alternatively, the AWG (arbitrary wave generator) can produce a wide range of frequencies with low phase noise, including digital controllability. One of the vital components of the AWG is the direct digital synthesiser (DDS). Generally, it is composed of a phase accumulator, digital to analogue converter, sine mapping circuits and low pass filter. It needs a reference clock that acts as samples of the DDS outputs. Its output frequency can be varied by applying an appropriate digital input code. But high-speed DDS has several limitations; such as low number of output frequency points, lack of phase control unit, high power consumptions etc. This work addresses such limitations.
Diese Thesis befasst sich mit dem Problem korrelierter Elektronensysteme in realen Materialien. Ausgangspunkt hierbei ist die quantenmechanische Beschreibung dieser Systeme im Rahmen der sogenannten Kohn-Scham Dichtefunktionaltheorie, welche die Elektronen der Kristallsysteme als effektiv nicht-wechselwirkende Teilchen beschreibt.
Während diese Modellierung im Falle vieler Materialklassen erfolgreich ist, unterscheiden sich die korrelierten Elektronensysteme dadurch, dass der kollektive Charakter der Elektronendynamik nicht zu vernachlässigen ist.
Um diese Korrelationseffekte genauer zu untersuchen, verwenden wir in dieser Arbeit das Hubbard-Modell, welches mit der projektiven Wannierfunktionsmethode aus der Kohn-Scham Dichtefunktionaltheorie konstruiert werden kann.
Das Hubbard-Modell umfasst hierbei nur die lokale Elektron-Elektron-Wechselwirkung auf einem Gitter. Auch wenn das Modell augenscheinlich sehr simpel ist, existieren exakte Lösungen nur in bestimmten Grenzfällen. Dies macht die Entwicklung approximativer Ansätze erforderlich, wobei die Weiterentwicklung der sogenannten Two-Particle Self-Consistent Methode (TPSC) eine zentrale Rolle dieser Arbeit einnimmt.
Bei TPSC handelt es sich um eine Vielteilchenmethode, die in der Sprache funktionaler Ableitungen und sogenannter conserving approximations hergeleitet werden kann.
Der zentrale Gedanke dabei ist, den effektiven Wechselwirkungsvertex als statisch und lokal zu approximieren. Dies wiederum erlaubt die Bewegungsgleichung des Systems
erheblich zu vereinfachen, sodass eine numerische approximative Lösung des Hubbard-Modells möglich wird. Vorsetzung hierbei ist nur, dass sich das System in der normalleitenden Phase befindet und die bei Phasenübergängen entstehenden Fluktuationen nicht zu groß sind.
Während diese Methode ursprünglich von Y. M. Vilk und A.-M. Tremblay für das Ein-Orbital Hubbard-Modell entwickelt wurde, stellen wir in dieser Arbeit eine Erweiterung auf Viel-Orbital-Systeme vor.
Im Falle mehrerer Orbitale treten in der TPSC-Herleitung einzelne Komplikationen auf, die mit weiteren Approximationen behandelt werden müssen. Diese werden anhand eines einfachen Zwei-Orbital Modell-Systems diskutiert und die TPSC-Ergebnisse werden darüber hinaus mit den Ergebnissen der etablierten dynamischen Molekularfeldnährung verglichen.
In diesem Zusammenhang werden auch mögliche zukünftige Erweiterungen bzw. Verbesserungen von TPSC diskutiert.
Ein weiterer wichtiger Aspekt ist die Anwendung von TPSC auf reale Materialien.
In diesem Zusammenhang werden in dieser Arbeit die supraleitenden Eigenschaften der organischen K-(ET)2X Systeme untersucht. Hierbei lassen die TPSC-Resultate darauf schließen, dass das populäre Dimer-Modell, welches zur Beschreibung dieser Materialien herangezogen wird, nicht genügt um die experimentell bestimmten kritischen Temperaturen zu erklären und dass das komplexere Molekülmodell weitere exotische supraleitende Lösungen zulässt.
Schließlich untersuchen wir außerdem die elektronischen Eigenschaften des eisenbasierten Supraleiters LiFeAs und diskutieren inwieweit nicht-lokale Korrelationseffekte, welche durch TPSC aufgelöst werden können, die experimentellen Daten reproduzieren.
This dissertation presents the development of a new radio frequency quadrupole (RFQ) structure of the 4-rod type with an operating frequency of 108 MHz for the acceleration of heavy ions with mass-to-charge ratios of up to 8.5 at high duty cycles up to CW operation ("continuous wave") at the High Charge Injector (HLI) of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt.
The need to develop a completely new RFQ for the HLI arises from the fact that with the previously designed and built 4-rod RFQ structure, which was commissioned at the HLI in 2010 as part of the planned HLI upgrade program, the desired operating modes in both pulsed and CW operation could not be achieved even after several years of operating experience and considerable efforts to eliminate or at least mitigate the severe operational instabilities. Mechanical vibrations of the electrodes, which result in strong modulated power reflection, as well as the high thermal sensitivity proved to be particularly problematic.
In addition to the RF design of the new RFQ by simulations performed with the CST Microwave Studio software, the focus of the investigations fell on the mechanical analysis of vibrations on the electrode rods caused by RF operation, for which the ANSYS Workbench software was used. Due to the high thermal load of the RFQ structure of more than 30 kW/m in CW operation, an accurate analysis of the thermal effects on electrode deformation as well as resulting frequency detuning of the resonator is also required, which was investigated by simulations within the capabilities of CST Mphysics Studio.
Based on the results of the design studies carried out by simulations and the thereby achieved design optimizations, a 4-rod RFQ prototype with 6 stems was finally manufactured, on which most of the properties expected from the simulations could be validated by measurements of the RF characteristics as well as of the vibration behavior.
Finally, based on the results of the pre-tests and considering a newly developed beam dynamics concept, a completely revised RF design for a new full-length HLI-RFQ was derived from the prototype design.
Die vorliegende Arbeit beschreibt die Erzeugung und Charakterisierung verschiedenartiger piezoresistiver Dünnschichten für die Druck- und Dehnungssensorik bei hohen Temperaturen, die mittels Sputterdeposition abgeschieden werden:
- metallische Schichten aus Chrom mit Verunreinigungen aus Sauerstoff, Stickstoff oder Platin,
- granulare Keramik-Metall-Schichten (Cermets), mit Platin oder Nickel als Metallkomponente und Aluminiumoxid (Al2O3) oder Bornitrid (BN) als Keramikkomponente.
Beide Schichttypen können mit geeigneten Beschichtungsparametern erhebliche piezoresistive Effekte aufweisen, also einen Widerstands-Dehnungs-Effekt, der den von typischen Metallschichten um ein Mehrfaches übersteigt. Der Effekt wird quantifiziert durch den k-Faktor, der die relative Änderung des Widerstands R auf die relative Änderung der Länge l, d.h. die Dehnung ε=Δl/l, bezieht: k=ΔR/(R ε).
In Beschichtungsreihen werden die Schichtzusammensetzung und die Depositionsbedingungen variiert und die Auswirkungen auf den elektrischen Widerstand, dessen Temperaturkoeffizienten (TKR), sowie den k-Faktor untersucht. Die k-Faktoren der chrombasierten Schichten liegen bei 10 bis 20 mit um null einstellbarem TKR. Die Cermet-Schichten erreichen je nach Material k-Faktoren von 7 bis über 70 mit meist stark negativen TKR von mehreren -0,1 %/K.
Die Chrom- und Chrom-Stickstoff-Schichten erweisen sich als geeignete Sensorschichten für Membran-Drucksensoren. Daher wird eine Reihe von Sensoren mit Wheatstone-Messbrücken erzeugt und charakterisiert. Sie zeigen den hohen k-Faktoren entsprechende hohe Signalspannen. Die guten Sensoreigenschaften bleiben auch bei hohen Temperaturen bis 230 °C erhalten.
Nach den ersten Untersuchungen bei Dehnungen bis maximal 0,1 % wird zusätzlich das Verhalten der Schichten bei höheren Dehnungen bis 1,4 % untersucht. Es zeigt sich vorwiegend ein lineares Widerstands-Dehnungs-Verhalten. Die Leiterbahnen der spröden chrombasierten Schichten werden bei Dehnungen um 0,7 % jedoch durch Risse zerstört, die sich von den Rändern der Schicht her ausbreiten.
Die Platin-Aluminiumoxid-Schicht zeigt einen enorm großen, nichtlinearen Widerstands-Dehnungs-Effekt, der auf Risse zurückgeführt werden kann, die sich nach einigen Belastungszyklen reproduzierbar öffnen und schließen.
Tieftemperaturmessungen von 2 bis 300 K zeigen Widerstandsminima der Chrom-Stickstoff-Schichten; Magnetwiderstandsmessungen deuten jedoch nicht auf den Kondo-Effekt hin.
Die Cermet-Schichten zeigen thermisch aktivierte Leitfähigkeit.
Ausgewählte Schichten werden bei Temperaturen bis 420 °C (693 K) charakterisiert. Die chrombasierten Schichten haben bei hohen Temperaturen stabile Widerstände, zeigen jedoch stark nichtlineare Temperaturverläufe von Widerstand und k-Faktor. Oberhalb einer gewissen Temperatur verschwindet der piezoresistive Effekt, kehrt jedoch beim Abkühlen zurück. Die Verläufe lassen sich durch die Schichtzusammensetzung und auch durch Temperaturbehandlungen modifizieren.
Die Platin-Aluminiumoxid-Schicht ist ebenfalls temperaturstabil und zeigt geringe Änderungen des k-Faktors im Temperaturverlauf. Platin-Bornitrid zeigt große, reversible Widerstandsänderungen bei höheren Temperaturen, die auf mögliche Gaseinlagerungen hindeuten.
Aus den experimentellen Ergebnissen lassen sich die Ursachen der Piezoresistivität ableiten: Die chrombasierten Schichten bilden, wie in der Literatur vielfach beschrieben, unterhalb einer Ordnungstemperatur einen Spindichtewellen-Antiferromagnetismus aus. Dieser Zustand führt zu einem zusätzlichen Widerstandsbeitrag, der die beschriebenen Nichtlinearitäten der Widerstands-Temperatur-Verläufe verursacht und zudem empfindlich auf mechanische Dehnung reagiert und so zu erhöhten k-Faktoren führt.
Die Piezoresistivität der Cermet-Schichten resultiert aus der granularen Struktur, in der Ladungsträger zwischen Metallpartikeln tunneln. Mit exponentiell vom Partikelabstand abhängigen Widerständen der Tunnelübergänge resultieren hohe k-Faktoren. Mithilfe von Modellbetrachtungen, in denen Gleichungen für Tunnelwiderstände auf granulare Systeme angewendet werden, werden die experimentellen Ergebnisse diskutiert. Die Ergebnisse deuten darauf hin, dass sich die Eigenschaften der Keramik vorrangig auf den Betrag der k-Faktoren auswirken und die Eigenschaften des Metalls vor allem den TKR beeinflussen.
Für die vorliegende Arbeit wurden zur Analyse des Auger-Zerfalls kleiner Moleküle nach Photoionisation die aus der Zerfallsreaktion resultierenden Impuls- und Energiespektren von Photo- und Auger-Elektronen in Koinzidenz mit denen der ionischen Fragmente aufgenommen. Dies ermöglichte eine getrennte Betrachtung der während des Ionisationsschrittes und des Zerfallsschrittes dieses Prozesses besetzten Molekülzustände. Um weitere Einsicht in die Dynamik des Zerfalls zu erhalten, wurden vorhandene theoretische Modelle, welche insbesondere die Interaktion der durch die Reaktion produzierten geladenen Teilchen (Post Collision Interaction) einbeziehen, an die gemessenen Energiespektren angepasst. Dies ermöglichte die separate Betrachtung der im Ionisationsschritt besetzten Molekülzustände. So konnten die Emissionswinkelverteilungen der Photoelektronen im molekülfesten Koordinatensystem für jeden besetzten Anfangszustand einzeln betrachtet werden. Die Trennung der Endzustände des Zerfalls erfolgte über die Analyse des Spektrums der Ionen-Aufbruchsenergie (Kinetic Energy Release) und den Vergleich mit berechneten Potentialkurven der beitragenden Endzustände.
Durch die nach den Anfangszuständen separierte Betrachtung des Auger-Zerfalls wurde es auch möglich, die Auswirkungen dieser Zustände auf die Zerfallsdynamik zu analysieren. Dafür lieferte die Anpassung der Modellprofile die Lebensdauer des jeweiligen 1s-Lochzustandes in dem entsprechenden Zerfallskanal. Diese jeweiligen Lebensdauern eines jeden Zustandes wurden abhängig von verschiedenen Parametern mit einer Genauigkeit im Attosekunden-Bereich aus den Energiespektren der Photoelektronen ermittelt.
In the last two decades, new unpredicted charmonium-like states with extraordinary characteristics have been observed experimentally. These states also known as the XYZ states, e.g., the Y(4260) or the X(3872), are mostly interpreted as QCD allowed exotic hadrons. One of the leading hadron physics experiments in the world, the Beijing Electron Spectrometer III (BESIII) at the Beijing Electron-Positron Collider II (BEPCII) is aiming towards revealing the internal structure of these states. It has brought numerous breakthrough discoveries including the discovery of the charged Zc(3900). In order to understand the nature of the Y(4260) state and its decay patterns, an inclusive analysis is performed for different recoil systems (π+π−,K+K− and K±π∓) using the BESIII data samples for center of mass energies above 4 GeV collected between 2013 and 2019. The aim of this analysis is twofold: on one hand, we search for new unobserved charmonium-like decay channels using the missing mass technique and on the other hand, it provides an accurate inclusive cross section measurement for e+e−→X π+π−, with the X being the J/ψ, hc and ψ(2S), respectively. Two resonant structures, the Y(4220) and the Y(4390), are observed in the inclusive energy dependent Born cross section of e+e−→hc π+π−, which is consistent with the BESIII exclusive measurements. Moreover, the energy dependent cross section of e+e−→J/ψ π+π− is investigated, in which two resonances have consistently been observed with the previous BESIII exclusive studies, namely, the Y(4220) and the Y(4320). In the (K±π±) recoil system, possible Y(4260) open charm decay channels are investigated. Two enhancements are observed in the inclusive energy dependent cross section of e+e−→DD above 4.13GeV, which could possibly be the ψ(4160)and the ψ(4415).
The small photoreceptor Photoactive Yellow Protein (PYP) enters a reversible photocycle after excitation with blue light. The intermediate states are formed on timescales ranging from femtoseconds to seconds including chromophore isomerization and protonation as well as large structural rearrangements. To obtain local dynamic information the vibrational label thiocyanate (SCN) can be inserted site-specifically at any desired position in the protein by cysteine mutation and cyanylation. The label's CN stretch vibration is highly sensitive to polarity, hydrogen bonding interactions and electric fields and is spectrally well separated from the overlapping protein absorptions. During the course of this thesis it was impressively demonstrated that the successful incorporation of the SCN label at selected positions in PYP provides a powerful tool to study structure changes and dynamics during the photocycle and enhance the local information that are obtained by infrared (IR) spectroscopic methods. Hence the SCN-labeled protein mutants were studied under equilibrium (steady-state) and non-equilibrium conditions.
Examination of the SCN absorption by FTIR spectroscopy showed the influence of various local environments on the label for different locations in the dark state. The response of the label under illumination with blue light reveals information about structural changes in the signaling state. Additional information for both states were obtained by the vibrational lifetime of the CN vibration measured via ultrafast IR-pump-IR-probe experiments. This observable is particularly sensitive for solvent exposure of the label. Time-resolved IR spectroscopy proved to be an excellent method to follow the protein dynamics throughout most part of the photocycle on a hundreds of femtoseconds to milliseconds timescale. By close inspection of protein and chromophore dynamics in wildtype-PYP over nine decades in time, new insights into the changes leading to the proposed photocycle intermediates were obtained. The investigation of the SCN label allowed to follow the different transient structure changes with high local resolution. Depending on its position within the protein the response of the label provided additional information on the photocycle transitions.
The insights that are obtained by the different observables in the steady-state and by the reaction of the SCN label to formation of the different intermediate states during the photocycle contribute to an improved understanding of local, light-induced structure changes in the photoreceptor PYP. This comprehensive study demonstrated the potential provided by the application of SCN as IR label for investigation of protein dynamics.