Refine
Document Type
- Article (9)
- Conference Proceeding (2)
- Bachelor Thesis (1)
- Doctoral Thesis (1)
- Master's Thesis (1)
Has Fulltext
- yes (14)
Is part of the Bibliography
- no (14)
Keywords
We measured the Coulomb dissociation of 16O into 4He and 12C at the R3B setup in a first campaign within FAIR Phase 0 at GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt. The goal was to improve the accuracy of the experimental data for the 12C(α,γ)16O fusion reaction and to reach lower center-ofmass energies than measured so far.
The experiment required beam intensities of 109 16O ions per second at an energy of 500 MeV/nucleon. The rare case of Coulomb breakup into 12C and 4He posed another challenge: The magnetic rigidities of the particles are so close because of the same mass-to-charge-number ratio A/Z = 2 for 16O, 12C and 4He. Hence, radical changes of the R3B setup were necessary. All detectors had slits to allow the passage of the unreacted 16O ions, while 4He and 12C would hit the detectors' active areas depending on the scattering angle and their relative energies. We developed and built detectors based on organic scintillators to track and identify the reaction products with sufficient precision.
Most of the elements heavier than iron are produced through neutron capture reactions in the s- and r -process. The overall path of the s-process is well understood and can be accurately reproduced in network simulations. However, there are still some neutron capture reactions of unstable nuclei involved in the s-process, which were not yet measured due to the difficulty in producing suitable targets. In those cases, theoretical models have to be used to estimate the missing cross section.
One example is the branching point nucleus 86Rb, whose neutron capture cross section cannot be directly measured due to its short half life of 18.86 days. It is, however, also possible to measure its inverse, the 87Rb(g,n) reaction in order to obtain the 86Rb(n,g) cross section through the principle of detailed balance.
Natural rubidium was irradiated with a quasi-monoenergetic photon beam in the energy range between 10.7 MeV and 16 MeV in order to investigate the photo-dissociation cross section of 87Rb. The results are presented in this thesis. Not only the total cross section of 87Rb(g,n), but also the partial production cross section of the ground and isomeric state of 84Rb through the 85Rb(g,n) reaction was measured.
Not all isotopes can be reached via neutron capture reaction, and are therefore bypassed by the s- and r -process. These 35 proton-rich isotopes are called p-nuclei and are produced in the γ-process by a chain of photo-disintegration reactions in Type II supernovae. Network calculations of Type II supernova show that the γ-process can explain the production of most p-nuclei, but some – especially 92/94Mo and 96/98Ru – are heavily underproduced. While this could be the result of deficiencies in the corresponding stellar models or insufficient knowledge of the involved reaction rates, it is also possible that the missing p-nuclei are synthesized in other production scenarios.
An alternative scenario for 92Mo is the production via a chain of proton capture reactions in Type Ia supernovae. One important reaction in this chain is the 90Zr(p,g) reaction. The reaction cross section was already measured several times, but the results were inconclusive. In the present work, the 90 Zr(p,g) reaction was measured using the in-beam gamma-ray spectroscopy technique and the discrepancies between the data sets could be largely explained.
XIII Nuclei in the Cosmos, 7-11 July, 2014 Debrecen, Hungary.
As an alternative production scenario to the so-called g process, the most abundant p nucleus 92Mo may be produced by a chain of proton-capture reactions in supernovae type Ia. The reactions 90Zr(p,g) and 91Nb(p,g) are the most important reactions in this chain. We have measured the first reaction using high-resolution in-beam g-spectroscopy at HORUS, Cologne, Germany, to contribute to the existing experimental data base. So far, we only investigated the high-energy part of the Gamow window and the analysis is still in progress. We plan to study the second reaction in standard kinematics at the FRANZ facility, Frankfurt, Germany. Current developments at FRANZ will be explained in detail.
p-process nucleosynthesis via proton-capture reactions in thermonuclear supernovae explosions
(2015)
Model calculations within the framework of the so-called γ process show an underproduction of the p nucleus with the highest isotopic abundace 92Mo. This discrepancy can be narrowed by taking into account the alternative production site of a type Ia supernova explosion. Here, the nucleus 92Mo can be produced by a sequence of proton-capture reactions. The amount of 92Mo nuclei produced via this reaction chain is most sensitive to the reactions 90Zr(p,γ) and 91Nb(p,γ). Both rates have to be investigated experimentally to study the impact of this nucleosynthesis aspect on the long-standing 92Mo-problem. We have already measured the proton-capture reaction on 90Zr using high-resolution in-beam γ-ray spectroscopy. In this contribution, we will present our preliminary results of the total cross sections as well as the partial cross sections. Furthermore, we plan to measure the 91Nb(p,γ) reaction soon. Due to the radioactive target material, the 91Nb nuclei have to be produced prior to the experiment. The current status of this production will be presented in this contribution.
About 50% of the elements heavier than iron are produced during the slow neutron capture process. This process occurs in different stellar sites at various energies. To understand the ongoing nucleosynthesis, the probability of a neutron capture for different temperatures and therefore for different stellar sites is essential. Activation experiments using the 7Li(p,n) reaction as neutron source were performed. At a temperature of kBT = 25 keV the cross sections were determined for 27Al, 37Cl and 41K. A new method was developed to perform activation experiments at even lower temperatures. For a proof of principle, the cross section for 64Ni was measured at kBT = 25 keV as well as for kBT = 6 keV. To study the impact of isomeric states at higher energies, activations of 181Ta were performed using two different proton energies.
To determine the neutron flux in activation experiments, a commonly used monitor is zirconium and in particular the stable isotopes 94,96Zr. 96Zr is very sensitive to epithermal neutrons. Despite its widespread application, most gamma intensities of the radioactive neutron capture product, 97Zr, yield large uncertainties. With the help of a new γ spectroscopy setup and GEANT simulations, we succeeded in determining a new set of γ-ray intensities with significantly reduced uncertainties.
We measured the neutron capture cross sections of 69Ga and 71Ga for a quasi-stellar spectrum at kBT = 25 keV and a spectrum with a peak energy at 90 keV by the activation technique at the Joint Research Centre (JRC) in Geel, Belgium. Protons were provided by an electrostatic Van de Graaff accelerator to produce neutrons via the reaction 7Li(p,n). The produced activity was measured via the γ emission of the product nuclei by high-purity germanium detectors. We present preliminary results.
The p nucleus 92Mo is believed to be mainly produced through photodisintegration reactions in type II supernovae. However, this production scenario cannot solely account for the observed solar relative isotopic abundance of 92Mo. Additional production scenarios have been suggested to explain this discrepancy. One of these scenarios could be the production of 92Mo in type Ia supernovae via a chain of proton-capture reactions. To verify this scenario, an accurate knowledge of the involved reaction rates is important. We measured the cross section of 90Zr(p,γ) reaction using an enriched 90Zr target by means of in-beam γ-ray spectroscopy in the energy range between 3.6MeV and 5.1MeV. Since the reactions 90Zr(p,γ) and 91Zr(p,n) produce the same nucleus, the contributions of both reactions have to be disentangled. This procedure is explained in this contribution in detail.