Refine
Document Type
- Article (9)
- Doctoral Thesis (1)
Language
- English (10)
Has Fulltext
- yes (10)
Is part of the Bibliography
- no (10)
Keywords
- 3D printing (2)
- 3D rapid prototyping (2)
- Platelet-rich fibrin (2)
- dentoalveolar surgery (2)
- oral and maxillofacial surgery (2)
- simulation training (2)
- Collagen-based biomaterial (1)
- Dental students (1)
- Disintegration (1)
- Feedback (1)
Institute
- Medizin (10)
Current research on medical biomaterials have shown that the physical and chemical characteristics of biomaterials determine the body inflammatory cellular reaction after their implantation. The aim of this study was to evaluate the individual effects of the physical characteristics over the initial biomaterial-cellular interaction and the inflammatory cellular reaction. For this purpose, an equine-derived collagen hemostatic sponge (E-CHS) was modified by pressing and evaluated using ex vivo, in vitro and in vivo methods.
The E-CHS was pressed by applying constant pressure (6.47± 0.85 N) for 2 min using a sterile stainless-steel cylinder and cut in segments of 1cm2. Subsequently, E-CHS and the pressed equine-derived collagen hemostatic sponge (P-E-CHS) were studied as two independent biomaterials and compared to a control group (CG).
A blood concentrate containing inflammatory cells known as platelet rich fibrin (PRF) was used to mimic the initial biomaterial-cell interaction and to measure the absorption coefficient of the biomaterials to liquid PRF (iPAC). Additionally, the biomaterials were cultivated together with PRF for 3 and 6 days to measure the induction of pro-inflammatory cytokines (TNF-α and IL-8). The results were obtained through enzyme-linked immunosorbent assay (ELISA) and histological methods. PRF cultivated without biomaterials served as the CG. Additionally, the biomaterials were evaluated in vivo using a subcutaneous model in Wistar rats and compared to sham operated animals (CG) representing physiologic wound healing. After 3, 15 and 30 days, the explanted samples were evaluated using histochemical and immunohistochemical (IHC) staining using the following markers: CD68 (pan macrophages), CCR7 (pro-inflammatory macrophages, M1), CD206 (pro-wound healing macrophages, M2) and α-Smooth Muscle Actin (α-SMA; vessel identification).
After the mixture of liquid PRF with both biomaterials for 15 minutes, the ex vivo results showed that E-CHS was penetrated by cells, whereas P-E-CHS was cell-occlusive. Additionally, P-E-CHS induced a higher release of pro-inflammatory cytokines compared to liquid PRF alone (CG) and E-CHS after 3 days (P< 0.05). Although the biomaterial was pressed, the difference of the iPAC value did not show statistical differences. In vivo, the CG induced at day 3 a higher inflammatory response compared to the experimental groups (EG) (P< 0.05). The intergroup comparison showed that P-E-CHS induced a higher presence of macrophages (CD68+/CC7+) compared to E-CHS at day 3 (P< 0.05). Only CD68+/CCR7+ mononuclear cells (MNCs) were observed without multinucleated giant cells (MNGCs). After 15 days, the presence of macrophages (CD68+ P<0.01 /CCR7+ P<0.001 /CD206+ P<0.05) reduced considerably in the CG. On the contrary, the inflammatory response increased in the EGs (CD68+/CCR7+). The intergroup comparison showed that this increment was statistically significant when comparing E-CHS and P-E-CHS to the CG at day 15 (P<0.01 and P< 0.05 respectively). At this time point, a reduced number of MNGCs were observed in the EGs. In the CG no MNGCs were observed. Furthermore, E-CHS showed a faster degradation rate and was fully invaded by cells and vessels formed in its interior region. On the other hand, P-E-CHS remained occlusive to cell penetration and vessels were formed only in the periphery. After 30 days, the cellular reaction shifted to a higher number of M2 macrophages (CD260+) in all groups and a reduced presence of CD68+ and CCR7+ MNCs. Both biomaterials degraded and only small fragments were found in the implantation bed surrounded by MNGCs (CCR7+).
These results are of high clinical relevance and show that changes in biomaterial properties have a significant impact on their interaction with the body. They also serve as insight into the possibility to develop versatile biomaterials with different applications. For example, E-CHs can be applied to support hemostasis in a bleeding alveolar socket and P-E-CHs by being cell occlusive and having a delayed degradation rate can be applied for guided bone and tissue regeneration.
Objective: The aim of this study was to retrospectively review the midface and orbital floor fractures treated at our institution with regard to epidemiological aspects, surgical treatment options and postoperative complications and discuss this data with the current literature. Study design: One thousand five hundred and ninety-four patients with midface and orbital fractures treated at the Department of Oral, Cranio-Maxillofacial and Facial Plastic Surgery of the Goethe University Hospital in Frankfurt (Germany) between 2007 and 2017 were retrospectively reviewed. The patients were evaluated by age, gender, etiology, fracture pattern, defect size, surgical treatment and complications. Results: The average patient age was 46.2 (± 20.8). Most fractures (37.5%) occurred in the age between 16 and 35. Seventy-two percent of patients were male while 28% were female. The most common cause of injury was physical assault (32.0%) followed by falls (30.8%) and traffic accidents (17.0%). The average orbital wall defect size was 297.9 mm2 (± 190.8 mm2). For orbital floor reconstruction polydioxanone sheets (0.15 mm 38.3%, 0.25 mm 36.2%, 0.5 mm 2.8%) were mainly used, followed by titanium meshes (11.5%). Reconstructions with the 0.15 mm polydioxanone sheets showed the least complications (p < 0.01, r = 0.15). Eighteen percent of patients who showed persistent symptoms and post-operative complications: 12.9% suffered from persistent hypoesthesia, 4.4% suffered from post-operative diplopia and 3.9% showed intra-orbital hematoma. Conclusion: Results of the clinical outcome in our patients show that 0.15 mm resorbable polydioxanone sheets leads to significantly less post-operative complications for orbital floor defects even for defects beyond the recommended 200 mm2.
Background: The high-oblique sagittal osteotomy (HOSO) is an alternative to a bilateral sagittal split osteotomy (BSSO). Due to its novelty, there are no long-term studies which have focused on describing the incidence and type of complications encountered in the post-operative follow-up. The aim of this retrospective study is to analyze patients operated on with this surgical technique and the post-operative complications encountered. Patient and methods: The electronic medical records of all patients treated with orthognathic surgery at the Department of Oral, Maxillofacial and Facial Plastic Surgery, University Hospital Frankfurt, Goethe University, Frankfurt, Germany, between the years 2009 and 2016 were retrospectively reviewed. Results: A total of 116 patients fulfilled the inclusion criteria. The cases operated on with the standard osteosynthesis (X, Y, and straight) showed a complication rate of 36.37% (n = 4/11). The cases operated on with the HOSO-dedicated plates (HOSO-DP) showed, in total, a complication rate of 6.67% (n = 7/105). The most common post-operative complication resulting from both fixation methods was a reduction in mouth opening and TMJ pain for 4.3%. During the first years of performing the surgery (2009–211), a variety of standard plates had material failure causing non-union or pseudarthrosis. No cases of material failure were observed in the cases operated on with the HOSO-DP. The statistical results showed a highly significant dependence of a reduction in OP-time over the years, when the HOSO was performed without additional procedures (R2 > 0.83, P < 0.0015). Conclusion: The rate of complications in the HOSO were shown to be comparable to the rate of complications from the BSSO reported in the literature. Moreover, the use of the ramus dedicated plate appears to provide enough stability to the bone segments, making the surgery safer. Clinical relevance: The HOSO needs to be considered by surgeons as an alternative to BSSO. Once the use of the HOSO-DP was established, the rate of complications and the operation time reduced considerably.
Background: Recent advances in 3D printing technology have enabled the emergence of new educational and clinical tools for medical professionals. This study provides an exemplary description of the fabrication of 3D‐printed individualised patient models and assesses their educational value compared to cadaveric models in oral and maxillofacial surgery.
Methods: A single‐stage, controlled cohort study was conducted within the context of a curricular course. A patient's CT scan was segmented into a stereolithographic model and then printed using a fused filament 3D printer. These individualised patient models were implemented and compared against cadaveric models in a curricular oral surgery hands‐on course. Students evaluated both models using a validated questionnaire. Additionally, a cost analysis for both models was carried out. P‐values were calculated using the Mann‐Whitney U test.
Results: Thirty‐eight fourth‐year dental students participated in the study. Overall, significant differences between the two models were found in the student assessment. Whilst the cadaveric models achieved better results in the haptic feedback of the soft tissue, the 3D‐printed individualised patient models were regarded significantly more realistic with regard to the anatomical correctness, the degree of freedom of movement and the operative simulation. At 3.46 € (compared to 6.51 €), the 3D‐printed patient individualised models were exceptionally cost‐efficient.
Conclusions: 3D‐printed patient individualised models presented a realistic alternative to cadaveric models in the undergraduate training of operational skills in oral and maxillofacial surgery. Whilst the 3D‐printed individualised patient models received positive feedback from students, some aspects of the model leave room for improvement.
Objectives: The aim of the present study was to characterize the cellular reaction to a xenogeneic resorbable collagen membrane of porcine origin using a subcutaneous implantation model in Wistar rats over 30 days.
Materials and methods: Ex vivo, liquid platelet-rich fibrin (PRF), a leukocyte and platelet-rich cell suspension, was used to evaluate the blood cell membrane interaction. The material was implanted subcutaneously in rats. Sham-operated rats without biomaterial displayed physiological wound healing (control group). Histological, immunohistological, and histomorphometric analyses were focused on the inflammatory pattern, vascularization rate, and degradation pattern.
Results: The membrane induced a large number of mononuclear cells over the observation period, including lymphocytes, macrophages, and fibroblasts. After 15 days, multinucleated giant cells (MNGCs) were observed on the biomaterial surface. Their number increased significantly, and they proceeded to the center of the biomaterial on day 30. These cells highly expressed CD-68, calcitonin receptor, and MMP-9, but not TRAP or integrin-ß3. Thus, the membrane lost its integrity and underwent disintegration as a consequence of the induction of MNGCs. The significant increase in MNGC number correlated with a high rate of vascularization, which was significantly higher than the control group. Physiological wound healing in the control group did not induce any MNGCs at any time point. Ex vivo blood cells from liquid-PRF did not penetrate the membrane.
Conclusion: The present study suggests a potential role for MNGCs in biomaterial degradation and questions whether it is beneficial to accept them in clinically approved biomaterials or focus on biomaterials that induce only mononuclear cells. Thus, further studies are necessary to identify the function of biomaterial-induced MNGCs.
Clinical relevance: Understanding the cellular reaction to biomaterials is essential to assess their suitability for specific clinical indications and outline the potential benefit of specific group of biomaterials in the respective clinical indications.
Different tissue engineering techniques are used to support rapid vascularisation. A novel technique is the use of platelet-rich fibrin (PRF), an autologous source of growth factors. This study was the first to investigate the influence of PRF matrices, isolated following different centrifugation protocols, on human dermal vascular endothelial cells (ECs) in mono-culture and co-culture with human primary fibroblasts (HFs) as an in vitro model for tissue regeneration. Focus was placed on vascular structure formation and growth factor release. HFs and ECs were cultivated with PRF prepared using a high (710 ×g) or low (44 ×g) relative centrifugation force (RCF) over 14 d. Immunofluorescence staining and immunohistochemistry were used to evaluate the microvascular formation. Cell culture supernatants were collected for evaluation of growth factor release. The results showed a PRF-mediated effect on the induction of angiogenesis in ECs. Microvessel-like structure formation was promoted when ECs were combined with low-RCF PRF as compared to high-RCF PRF or control group. The percentage of vascular lumen area was significantly higher in low-RCF PRF, especially at day 7, which coincided with statistically significantly higher growth factor [vascular endothelial factor (VEGF), transforming growth factor β1 (TGF-β1) and platelet derived growth factor (PDGF)] concentration measured in low-RCF PRF as compared to high-RCF PRF or control group. In conclusion, reducing the RCF according to the low-speed centrifugation concept (LSCC) resulted in increased growth factor release and angiogenic structure formation with EC mono-culture, suggesting that PRF may be a highly beneficial therapeutic tool for tissue engineering applications.
Platelet-rich fibrin (PRF) is a blood concentrate derived from venous blood that is processed without anticoagulants by a one-step centrifugation process. This three-dimensional scaffold contains inflammatory cells and plasma proteins entrapped in a fibrin matrix. Liquid-PRF was developed based on the previously described low-speed centrifuge concept (LSCC), which allowed the introduction of a liquid-PRF formulation of fibrinogen and thrombin prior to its conversion to fibrin. Liquid-PRF was introduced to meet the clinical demand for combination with biomaterials in a clinically applicable and easy-to-use way. The aim of the present study was to evaluate, ex vivo, the interaction of the liquid-PRF constituents with five different collagen biomaterials by histological analyses. The results first demonstrated that large variability existed between the biomaterials investigated. Liquid-PRF was able to completely invade Mucograft® (MG; Geistlich Biomaterials, Wolhusen, Switzerland) and to partly invade Bio-Gide® (BG; Geistlich Biomaterials, Wolhusen, Switzerland) and Mucoderm® (MD; Botiss Biomaterials, Berlin, Germany), and Collprotect® (CP; Botiss Biomaterials, Berlin, Germany) showed only a superficial interaction. The BEGO® collagen membrane (BCM; BEGO Implant Systems) appeared to be completely free of liquid-PRF. These results were confirmed by the different cellular penetration and liquid-PRF absorption coefficient (PAC) values of the evaluated membranes. The present study demonstrates a system for loading biomaterials with a complex autologous cell system (liquid-PRF) in a relatively short period of time and in a clinically relevant manner. The combination of biomaterials with liquid-PRF may be clinically utilized to enhance the bioactivity of collagen-based biomaterials and may act as a biomaterial-based growth factor delivery system.
The permeability and inflammatory tissue reaction to Mucomaix® matrix (MM), a non- cross-linked collagen-based matrix was evaluated in both ex vivo and in vivo settings. Liquid platelet rich fibrin (PRF), a blood concentrate system, was used to assess its capacity to absorb human proteins and interact with blood cells ex vivo. In the in vivo aspect, 12 Wister rats had MM implanted subcutaneously, whereas another 12 rats (control) were sham-operated without biomaterial implantation. On days 3, 15 and 30, explantation was completed (four rats per time-point) to evaluate the tissue reactions to the matrix. Data collected were statistically analyzed using analysis of variance (ANOVA) and Tukey multiple comparisons tests (GraphPad Prism 8). The matrix absorbed the liquid PRF in the ex vivo study. Day 3 post-implantation revealed mild tissue inflammatory reaction with presence of mononuclear cells in the implantation site and on the biomaterial surface (mostly CD68-positive macrophages). The control group at this stage had more mononuclear cells than the test group. From day 15, multinucleated giant cells (MNGCs) were seen in the implantation site and the outer third of the matrix with marked increase on day 30 and spread to the matrix core. The presence of these CD68-positive MNGCs was associated with significant matrix vascularization. The matrix degraded significantly over the study period, but its core was still visible as of day 30 post-implantation. The high permeability and fast degradation properties of MM were highlighted.
Background: The feedback given to students plays an important role in their efficiency related to learning practical skills. In the present study, diverse feedback modalities have been investigated. Our hypothesis is that individualized and unsupervised video feedback can produce a similar learning experience as performing practical skills in an oral and maxillofacial surgery setting with conventional direct expert feedback (control group).
Methods: This prospective, randomized, controlled, and blinded study compared direct expert feedback (DEF), individualized video feedback (IVF) and unsupervised video feedback (UVF). The participants were fourth-year dental students from University Goethe in Frankfurt. The students were assigned to one of the three feedback methods (n = 20 per group) using simple randomization. All participants watched an instruction video for an interdental (‘Ernst’) ligature and periphery venous catheterization. Next, the students were video recorded performing the tasks by themselves (pre-test). Following this, every student received feedback using one of the above-mentioned feedback modalities. The participants then performed the same task again while being video recorded (post-test) to measure the acquired competence. Six weeks later, the students participated in an objective structured clinical examination (OSCE) to evaluate their long-term knowledge retention. All examiners were blinded regarding the students’ instructional approach and their affiliation in terms of the learning group.
Results: For the interdental ligature, we found significant improvements in performance in each feedback modality group between the pre-test and post-test (p < 0.001). UVF had the strongest effect on performance time. The comparison between each group in the post-test showed no significant differences between the three groups.
Conclusion: This study showed that IVF and UVF can be considered an alternative or adjunct to conventional methods (i.e. DEF) when learning procedural skills in oral and maxillofacial surgery. However, DEF showed to be the most effective method of feedback and therefore preferable in teaching.