Refine
Year of publication
Document Type
- Article (25)
Has Fulltext
- yes (25)
Is part of the Bibliography
- no (25)
Keywords
- environmental tobacco smoke (6)
- particulate matter (4)
- additives (2)
- bibliometrics (2)
- passive smoke (2)
- second-hand smoke (2)
- (novel) brominated flame retardants ((N)BFR) (1)
- Acer platanoides (1)
- Adenocarcinoma (1)
- Aedes aegypti (1)
Institute
- Medizin (25)
- Biochemie und Chemie (8)
- Geowissenschaften / Geographie (1)
- Sportwissenschaften (1)
Highlights
• An airport can result in high particle concentrations in a distant residential area.
• The particle size distribution indicated the airport as the main source of particles.
• Lower air traffic during the COVID-19 pandemic lead to lower particle concentrations.
• The particle concentration showed high temporal variations.
Abstract
Exposure to ultrafine particles has a significant influence on human health. In regions with large commercial airports, air traffic and ground operations can represent a potential particle source. The particle number concentration was measured in a low-traffic residential area about 7 km from Frankfurt Airport with a Condensation Particle Counter in a long-term study. In addition, the particle number size distribution was determined using a Fast Mobility Particle Sizer.
The particle number concentrations showed high variations over the entire measuring period and even within a single day. A maximum 24 h-mean of 24,120 cm−3 was detected. Very high particle number concentrations were in particular measured when the wind came from the direction of the airport. In this case, the particle number size distribution showed a maximum in the particle size range between 5 and 15 nm. Particles produced by combustion in jet engines typically have this size range and a high potential to be deposited in the alveoli. During a period with high air traffic volume, significantly higher particle number concentrations could be measured than during a period with low air traffic volume, as in the COVID-19 pandemic.
A large commercial airport thus has the potential to lead to a high particle number concentration even in a distant residential area. Due to the high particle number concentrations, the critical particle size, and strong concentration fluctuations, long-term measurements are essential for a realistic exposure analysis.
Highlights
• Currently, China has the most publications, ahead of the USA and European countries.
• Research focuses are strictly separated into ecological and material science topics.
• Russia and Ukraine are among the frontrunners with a clear focus on materials science.
• The focus in PFAS research is shifting toward ecological issues.
• A national imbalance can be observed that leaves the low economies behind.
Abstract
The European Commission's current efforts to launch the largest proposal to restrict per- and polyfluoroalkyl substances (PFAS) in history reflect the dire global plight of PFAS accumulation in the environment and their health impacts. While there are existing studies on PFAS research, there is a lack of comprehensive analysis that both covers the entire research period and provides deep insights into global research patterns, incentives, and barriers based on various parameters. We have been able to demonstrate the increasing interest in PFAS research, although citation numbers are declining prematurely. Policy regulations based on proving and establishing the toxicity of PFASs have stimulated research in developed countries and vice versa, with increasing emphasis on ecological aspects. China, in particular, is investing increasingly in PFAS research, but without defining or implementing regulations - with devastating effects. The separation of industrial and environmental research interests is clear, with little involvement of developing countries, even though their exposure to PFAS is devastating. It, therefore, requires increased globally networked and multidisciplinary approaches to address PFAS contamination challenges.
The question of whether nuclear energy—as a source with relatively low carbon dioxide emissions—can be classified as a sustainable energy source has come into focus in connection with climate change. There is a controversy over securing independence from fossil fuels and gas supplies from other countries through a revival of nuclear energy. On the other hand, some viewpoints are critical: the handling of nuclear waste and the still unclear risks to human health and the environment, especially in light of recent perils from Russian military attacks on Ukrainian nuclear plants. To evaluate the worldwide publications on nuclear energy under health and environmental aspects, socio-economic parameters were included to provide an informed background for all stakeholders, from scientists to decision-makers. The correlation between the number of nuclear power plants and the publication output of the countries is proven to be highly significant. Thus, the operating countries publish the most. It has been shown that the development and economic use of nuclear energy are major stimuli for scientific endeavors. Reactor accidents have also spurred research. Mathematical risk modeling has been the area with the highest citation rate to date, but environmental and health aspects have become more important, especially after major accidents. The results show the importance of economic interests in research on nuclear energy from health and environmental aspects. Against the background of transnational hazards, global research participation should be encouraged. Moreover, the international debate should not ignore the reality of threats and their possible impacts.
Background: After nearly a quarter-century of declining poverty, the numbers are rising again significantly. This is due not only to effects of climate change but also to the COVID-19 pandemics and armed conflict. Combined with the enormous health impacts, that will cause misery and health care costs worldwide. Therefore, this study provides background information on the global research landscape on poverty and health to help researchers, stakeholders, and policymakers determine the best way to address this threat.
Results: The USA is the key player, dealing mainly with domestic issues. European countries are also involved but tend to be more internationally oriented. Developing countries are underrepresented, with Nigeria standing out. A positive correlation was found between publication numbers and economic strength, while the relationship between article numbers and multidimensional poverty was negatively correlated.
Conclusions: These findings highlight the need for advanced networking and the benefits of cross-disciplinary research to mitigate the coming impacts.
Private-label cigarettes are cigarettes that belong to the retailer itself. Private-label cigarettes from discounters or supermarkets are cheaper than brand-name cigarettes, and their lower price has allowed them to garner an ever-increasing share of the tobacco product market, especially among lower socioeconomic groups. Particulate matter (PM), a considerable component of air pollution, is a substantial health-damaging factor. Smoking is the primary source of PM in smokers’ homes. In a 2.88 m3 measuring chamber, the PM emission fractions PM10, PM2.5, and PM1 from three private-label cigarette brands and three brand-name cigarette brands with identical nicotine, tar, and carbon monoxide content were measured and compared to those of a reference cigarette by laser aerosol spectroscopy. All cigarette brands emitted PM in health-threatening quantities. The measurement results ranged from 1394 µg/m3 to 1686 µg/m3 PM10, 1392 µg/m3 to 1682 µg/m3 PM2.5, and 1355 µg/m3 to 1634 µg/m3 PM1, respectively. Only one private-label brand differed significantly (p < 0.001) from the other cigarette brands, which were tested with slightly lower PM levels. All other brands differed only marginally (not significant, p > 0.05) from one another. Significant (p < 0.05) negative correlations between private-label and brand-name cigarettes were found for PM10, PM2.5, and PM1 when accounting for tobacco filling densities, and for PM1 when accounting for filter lengths. The especially health-hazardous fraction PM1 accounted for the largest proportion of PM emissions from the cigarettes tested. The results of this study suggest that- cheaper tobacco products are as harmful as more expensive ones, at least regarding PM emissions. This highlights the importance of anti-smoking campaigns, especially for lower socioeconomic groups, where smoking is more widespread. Governments should reduce the price gap between cheap and more expensive tobacco products by implementing specific tobacco taxes. In such a case, at increasing prices of tobacco products, a downward shift to private-label cigarettes would probably decrease.
Radon ist ein ubiquitär im Erdmantel sowie in der Luft und im Wasser vorkommendes radioaktives Edelgas. Obwohl die mit der Exposition assoziierten Erkrankungen seit dem Mittelalter bekannt waren, ist eine kausale Zuordnung von Agens und Krankheit erst in der Mitte des letzten Jahrhunderts gelungen. Durch die physikalischen Eigenschaften des Gases ist die Prävention darauf ausgerichtet, die Exposition zu minimieren. Eine koordinierte Bemühung der EU, durch einheitliche Regeln die Bevölkerung zu schützen, stellt die Richtlinie 2013/59/EURATOM vom 5. Dezember 2013 dar. Umgesetzt in nationales Recht, sah die deutsche Strahlenschutzgesetzgebung vor, dass am 01.01.2021 die verantwortlichen Bundesländer basierend auf einer Expositionskarte die Gebiete festlegen, in denen der Grenzwert der Aktivitätskonzentration von Radon in der Luft im Jahresmittel 300 Bq/m3 überschreitet. In dieser Arbeit sollen die Fortschritte auf dem Weg zu einem umfassenderen Schutz vor den Gefahren durch Radon für die Bevölkerung in Deutschland dargestellt werden.
Introduction: Obesity is classified as a global epidemic and judged to be the greatest public health threat in Western countries. The tremendously increasing prevalence rates in children lead to morbidity and mortality in adults. In many countries, prevalence has doubled since the 1980s. Other countries show a continuous increase or stagnate at a very high level. Given these regional differences, this study aims to draw a global world map of childhood obesity research, including regional epidemiological characteristics, to comprehensively assess research influences and needs. Methods: In addition to established bibliometric parameters, this study uses epidemiological data to interpret metadata on childhood obesity research from the Web of Science in combination with state-of-the-art visualization methods, such as density equalizing map projections. Results: It was not until the 1990s that belated recognition of the dangerous effects of childhood obesity led to an increase in the number of publications worldwide. In addition, our findings show that countries’ study output does not correlate with epidemiologic rates of childhood obesity. In contrast, the primary driver of the research efforts on childhood obesity appears to be largely driven government funding structures. Discussion/Conclusion: The geographical differences in the epidemiological background of childhood obesity complicate the implementation of transnational research projects and cross-border prevention programs. Effective realization requires a sound scientific basis, which is facilitated by globally valid approaches. Hence, there is a need for information exchange between researchers, policy makers, and private initiatives worldwide.
Abstract In the middle of the twentieth century, the from North America sooty bark disease (SBD) of maples was first discovered in England and has spread in the last decades in Central Europe, in particular. The trigger of SBD is the mould fungus Cryptostroma (C.) corticale. The most common infested maple is the sycamore, Acer pseudoplatanus, a common tree in woods and parks. The disease is characterised by peeling of the outer layer of the bark and brownish-black spores under the peeled off bark. These spores can cause maple bark disease (MBD) in humans, a hypersensitivity pneumonitis (HP) with similar symptoms like COPD, allergic asthma, influenza or flu-like infections and interstitial pneumonia. Persons who have intensive respectively occupational contact with infested trees or wood, e.g., woodman, foresters, sawyers or paper mill workers, are at risk in particular. Since C. corticale favours hot summers and host trees weakened by drought, SBD will increasingly spread in the future due to ongoing climate change. Consequently, the risk of developing MBD will increase, too. As with all HPs, e.g., farmer’s lung and pigeon breeder’s disease, the diagnosis of MBD is intricate because it has no clear distinguishing characteristics compared to other interstitial lung diseases. Therefore, the establishment of consistent diagnosis guidelines is required. For correct diagnosis and successful therapy, multidisciplinary expertise including pulmonologists, radiologists, pathologists and occupational physicians is recommended. If MBD is diagnosed in time, the removal of the triggering fungus or the infested maple wood leads to complete recovery in most cases. Chronic HP can lead to lung fibrosis and a total loss of lung function culminating in death. HP and, thus, MBD, is a disease with a very high occupational amount. To avoid contact with spores of C. corticale, persons working on infested wood or trees have to wear personal protective equipment. To protect the public, areas with infested maples have to be cordoned off, and the trees should be removed. This is also for impeding further spreading of the spores.
Although the global tobacco market of cigarillos is substantial, little is known about their particulate matter (PM) emissions. For exposure risk assessment of cigarillos, the PM fractions PM10, PM2.5, and PM1 of eight cigarillo brands (four with filters) and a reference cigarette were measured. For this purpose, second-hand smoke was generated by an automatic smoke pump in a measuring chamber with a volume of 2.88 m³. The mean particle concentrations of the cigarillos ranged from 2783 μg/m³ to 6686 μg/m³ for PM10, from 2767 μg/m³ to 6585 μg/m³ for PM2.5, and from 2441 to 4680 μg/m³ for PM1. Mean concentrations of the reference cigarette for PM10, PM2.5, and PM1 were 4400 μg/m³, 4335 μg/m³, and 3289 μg/m³, respectively. Filter-tipped cigarillos showed between 5% and 38% lower PM10 and PM2.5 levels, respectively, and between 4% and 30% lower PM1 levels. Our findings show generally high PM emissions for all investigated tobacco products. Therefore, the declaration of PM amounts to government authorities should be mandatory for all tobacco products. Policymakers should ensure that corresponding information will be provided in the future.
Container-breeding Aedes spp. (Diptera: Culicidae) mosquitoes can be surveilled at low cost using ovitraps. Hence, this method is a preferred monitoring approach of dengue vectors in low-resource settings. The ovitraps consist of a cup filled with water and an oviposition substrate for female mosquitoes. The attractiveness of the substrates for female mosquitoes can greatly differ due to differences in texture, color, and smell of the materials used. We compare four oviposition substrates, which are all low priced, easy to transport, and easy to purchase, to maximize the success of Aedes egg sampling. Sampled egg material is often reared to adulthood for further taxonomic identification and transported to (international) laboratories for specialized vector research. Here we introduce a transport technique for sampled eggs. In addition, we explored the impact of international transport by means of a bilateral hatching experiment in Nepal, the country of origin, and in Germany, in a laboratory specialized in ecophysiological research. The best low-cost oviposition substrate for the dengue vectors Aedes albopictus (Skuse) and Aedes aegypti (L.) was found to be a white cotton sheet. The introduced transport technique of sampled eggs is easy to build from laboratory and household materials and ensures good transport conditions (i.e., temperature and relative humidity). Even under good temperature (17.4–31.0 °C) and humidity conditions (58.9–94.2%), hatching success of eggs was found to be reduced after international transport to Germany when compared to the hatching success of eggs in Nepal. We postulate that air pressure during international transport may have reduced the hatching success and strongly recommend pressure-regulated transport boxes for egg transport via airplane. As the proposed operation procedure is useful in assisting the monitoring of Ae. albopictus and Ae. aegypti in low-resource settings, Aedes researchers are encouraged to follow it for the sampling and transport of Aedes eggs.