Refine
Document Type
- Conference Proceeding (13)
- Article (4)
- diplomthesis (1)
- Doctoral Thesis (1)
Has Fulltext
- yes (19)
Is part of the Bibliography
- no (19)
Keywords
- Emittanz (1)
- Gabor lens (1)
- Gabor-Linse (1)
- Ionenoptik (1)
- Ionenstrahl (1)
- RFQ (1)
- RFQ-Beschleuniger (1)
- Raumladungskompensation (1)
- Raumladungslinse (1)
- Strahldiagnose (1)
Institute
- Physik (19)
Chopper systems are used to pulse charged particle beams. In most cases, electric deflection systems are used to generate beam pulses of defined lengths and appropriate repetition rates. At high beam intensities, the field distribution of the chopper system needs to be adapted precisely to the beam dynamics in order to avoid aberrations. An additional challenge is a robust design which guarantees reliable operation. For the Frankfurt Neutron Source FRANZ, an E×B chopper system is being developed which combines static magnetic deflection with a pulsed electric field in a Wien filter configuration. It will generate proton pulses with a flat top of 50 ns at a repetition rate of 250 kHz for 120 keV, 200 mA beams. For the electric deflection, pre-experiments with static and pulsed fields were performed using a helium ion beam. In pulsed mode operation, ion beams of different energies were deflected with voltages of up to ±6 kV and the resulting response was measured using a beam current transformer. A comparison between experiments and theoretical calculations as well as numerical simulations are presented.
An optimized design of a stellarator-type storage ring for low energy ion beams was numerically investigated. The magnetic field variation along the circumference and therefore magnetic heating is suppressed by using simple circular correction coils. Particle-in-Cell (PIC) simulations in a magnetic flux coordinate system show the ability of high current ion beam accumulation in such a configuration with unique features for clockwise and anticlockwise moving beams. Additionally scaled down experiments with two 30 degree room temperature toroidal segments were performed to demonstrate toroidal transport and to develop optical beam diagnostics. Properties of multi-component beams, redistribution of transversal momenta in the non-adiabatic part of the experimental configuration and investigation of strongly confined beam induced electron clouds will be addressed.
The Frankfurt Neutron Source at the Stern-Gerlach-Zentrum is driven by a 2 MeV proton linac consisting of a 4-rod-radio-frequency-quadrupol (RFQ) and an 8 gap IH-DTL structure. RFQ and IH cavity will be powered by only one radio frequency (RF) amplifier to reduce costs. The RF-amplifier of the RFQ-IH combination is coupled into the RFQ. Internal inductive coupling along the axis connects the RFQ with the IH cavity ensuring the required power transition as well as a fixed phase relation between the two structures. The main acceleration of 120 keV up to 2.03 MeV will be reached by the RFQ-IH combination with 175 MHz and at a total length of 2.3 m. The losses in the RFQ-IH combination are about 200 kW.
Investigation of the focus shift due to compensation process for low energy ion beam transport
(2000)
In magnetic Low Energy Beam Transport (LEBT) sections space charge compensation helps to enhance the transportable beam current and to reduce emittance growth due to space charge forces. For pulsed beams the time neccesary to establish space charge compensation is of great interest for beam transport. Particularly with regard to beam injection into the first accelerator section (e.g. RFQ) investigation of effects on shift of the beam focus due to space charge compensation are very important. The achieved results helps to obviate a mismatch into the first RFQ. To investigate the space charge compensation due to residual gas ionization, time resolved measurements using pulsed ion beams were performed at the LEBT system at the IAP and at the CEA-Saclay injektion line. A residual gas ion energy analyser (RGIA) equiped with a channeltron was used to measure the potential destribution as a function of time to estimate the rise time of compensation. For time resolved measurements (delta t min=50ns) of the radial density profile of the ion beam a CCD-camera was applied. The measured data were used in a numerical simulation of selfconsistant eqilibrium states of the beam plasma [1] to determine plasma parameters such as the density, the temperature, the kinetic and potential energy of the compensation electrons as a function of time. Measurements were done using focused proton beams (10keV, 2mA at IAP and 92keV, 62mA at CEA-Saclay) to get a better understanding of the influence of the compensation process. An interpretation of the acquired data and the achieved results will be presented.
A LEBT system consisting of an ion source, two solenoids, and a diagnostic section has been set up to investigate the space charge compensation process due to residual gas ionization [1] and to study experimentally the rise of compensation. To gain the radial beam potential distribution time resolved measurements of the residual gas ion energy distribution were carried out using a Hughes Rojanski analyzer [2,3]. To measure the radial density profile of the ion beam a CCD-camera performed time resolved measurements, which allow an estimation the rise time of compensation. Further the dynamic effect of the space charge compensation on the beam transport was shown. A numerical simulation under assumption of selfconsistent states [4] of the beam plasma has been used to determine plasma parameters such as the radial density profile and the temperature of the electrons. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. An interpretation of the achieved results is given.
To fulfil the requirements of ESS on beam transmission and emittance growth a detailed knowledge of the physics of beam formation as well as the interaction of the H- with the residual gas is substantial. Space charge compensated beam transport using solenoids for ion optics is in favour for the Low Energy Beam Transport (LEBT) between ion source and the first RFQ. Space charge compensation reduces the electrical self fields and beam radii and therefore emittance growth due to aberrations and redistribution. Transport of H- near the ion source is negatively influenced by the dipole fields required for beam extraction and e--dumping and the high gas pressure. The destruction of the rotational symmetry together with the space charge forces causes emittance growth and particle losses within the extraction system. High residual gas pressure near the extractor together with the high cross section for stripping will influence the transmission as well as space charge compensation. Therefore a detailed knowledge of the interaction of the residual gas with the beam and the influence of the external fields on the distribution of the compensation particles is necessary to reduce particle losses and emittance growth. Preliminary experiments using positive hydrogen ions for reference already show the influence of dipole fields on beam emittance. First measurements with H- confirm these results. Additional information on the interactions of the residual gas with the beam ions have been gained from the measurements using the momentum and energy analyser.
In einer Gabor-Linse wird durch ein axiales magnetisches Feld und ein longitudinales Potential ein so genanntes nichtneutrales Plasma (NNP) stabil eingeschlossen. Das elektrische Feld der Ladungsträgerwolke wirkt fokussierend auf Ionenstrahlen, die das Linsenvolumen passieren. Dieses Konzept, das D. Gabor 1946 vorstellte, wurde hinsichtlich seiner Eignung zur Ionenstrahlfokussierung seit den 1970-er Jahren untersucht, denn Gabor-Linsen ermöglichen eine elektrostatische Fokussierung erster Ordnung bei gleichzeitiger Raumladungskompensation im gesamten Transportkanal und haben damit einen großen Vorteil gegenüber den konventionellen Linsensystemen. Hauptsächlich zwei Gründe sprachen jedoch nach den meisten Experimenten gegen einen Einsatz dieses Linsentyps in Beschleunigern: Die erreichte Einschlusseffizienz und die Abbildungseigenschaften der eingeschlossenen Raumladungswolke blieben weit hinter den Erwartungen zurück. Erst ein geändertes Konzept zur Befüllung der Linse mit Elektronen und ein parallel zu den Experimenten entwickeltes numerisches Verfahren zur Bestimmung der Plasmaparameter ermöglichte die Entwicklung eines Linsensystems, das die Vorteile gegenüber konventionellen Ionenoptiken sichtbar werden ließ In der vorliegenden Arbeit wird neben der theoretischen Beschreibung des Plasmaeinschlusses der Aufbau und die Funktionsweise einer Gabor-Linse dargestellt. Experimentelle Befunde zur Strahlinjektion in einen RFQ unter Verwendung einer LEBT-Sektion, bestehend aus zwei Gabor-Linsen werden präsentiert. Nach der Beschleunigung des Ionenstrahles durch einen RFQ auf eine Energie von etwa 440 keV sollten Transportexperimente zeigen, ob eine neu entwickelte Hochfeld Gabor-Linse (HGL) zur Fokussierung dieses Strahles eingesetzt werden kann. Die Strahlenergie ist dabei mit der vergleichbar, die im HIF-Projekt (Heavy Ion Fusion) für die Injektion des Bi1+-Strahles in die erste Beschleunigerstruktur geplant ist. Insbesondere war bei den Experimenten mit dem durch den RFQ beschleunigten Strahl die Einschlusseffizienz bezüglich der Elektronendichte in der HGL von Interesse und auch das Verhalten des NNP bei der Fokussierung eines gepulsten Ionenstrahles.
Low energy beam transport (LEBT) for a future heavy ion driven inertial fusion (HIDIF [1]) facility is a crucial point using a Bi+ beam of 40 mA at 156 keV. High space charge forces (generalised perveance K=3.6*10-3) restrict the use of electrostatic focussing systems. On the other hand magnetic lenses using space charge compensation suffer from the low particle velocity. Additionally the emittance requirements are very high in order to avoid particle losses in the linac and at ring injection [2]. urthermore source noise and rise time of space charge compensation [3] might enhance particle losses and emittance. Gabor lenses [4] using a continuous space charge cloud for focussing could be a serious alternative to conventional LEBT systems. They combine strong cylinder symmetric focussing with partly space charge compensation and low emittance growth due to lower non linear fields. A high tolerance against source noise and current fluctuations and reduced investment costs are other possible advantages. The proof of principle has already been shown [5, 6]. To broaden the experiences an experimental program was started. Therefrom the first experimental results using a double Gabor lens (DGPL, see fig. 1 ) LEBT system for transporting an high perveance Xe+ beam will be presented and the results of numerical simulations will be shown.
The ARMADILLO bunch compressor currently being designed at IAP is capable of reaching a longitudinal pulse compression ratio of 45 for proton beams of 150 mA at 2 MeV. It will provide one nanosecond proton pulses with a peak current of 7.7 A. The system guides nine linacμbunches deflected by a 5 MHz rf kicker and uses four dipole magnets - two homogeneous and two with field gradients - to merge them on the target. For longitudinal focusing and an energy variation of ±200 keV two multitrack rf cavities are included. ARMADILLO will be installed at the end of the Frankfurt Neutron Source FRANZ making use of the unique 250 kHz time structure. This contribution will provide an overview of the layout of the system as well as recent advances in component design and beam dynamics of the compressor.