Refine
Year of publication
Document Type
- Article (49) (remove)
Language
- English (46)
- German (2)
- Multiple languages (1)
Has Fulltext
- yes (49)
Is part of the Bibliography
- no (49)
Keywords
- 3D printing (3)
- 3D rapid prototyping (3)
- simulation training (3)
- Complication management (2)
- Dental students (2)
- Disintegration (2)
- Fistula (2)
- Flaps (2)
- Grafts (2)
- High oblique sagittal osteotomy (2)
Institute
- Medizin (49)
- Präsidium (2)
- Psychologie (2)
- Starker Start ins Studium: Qualitätspakt Lehre (2)
- Biowissenschaften (1)
Introduction: Over the last years, electronic cigarettes (ECs) have become more popular, particularly in individuals who want to give up smoking tobacco. The aim of the present study was to assess the influence of the different e-smoking liquids on the viability and proliferation of human periodontal ligament fibroblasts.
Method and materials: For this study six test solutions with components from ECs were selected: lime-, hazelnut- and menthol-flavored liquids, nicotine, propylene glycol, and PBS as control group. The fibroblasts were incubated up to 96 h with the different liquids, and cell viability was measured by using the PrestoBlue® reagent, the ATP detection and the migration assay. Fluorescence staining was carried out to visualize cell growth and morphology. Data were statistically analyzed by two-tailed one-way ANOVA.
Results: The cell viability assay showed that the proliferation rates of the cells incubated with nicotine or the various flavored liquids of the e-cigarettes were reduced in comparison to the controls, though not all reductions were statistically significant. After an incubation of 96 h with the menthol-flavored liquid the fibroblasts were statistically significant reduced (p < 0.001). Similar results were found for the detection of ATP in fibroblasts; the incubation with menthol-flavored liquids (p < 0.001) led to a statistically significant reduction. The cell visualization tests confirmed these findings.
Conclusion: Within its limits, the present in vitro study demonstrated that menthol additives of e-smoking have a harmful effect on human periodontal ligament fibroblasts. This might indicate that menthol additives should be avoided for e-cigarettes.
Objective: To analyze Mucograft (MG), a recently introduced collagen matrix, in vitro and in vivo, and compare it with BioGide (BG), a well-established collagen membrane, as control.
Material and methods: A detailed analysis of the materials surface and ultra-structure was performed. Cellular growth patterns and proliferation rates of human fibroblasts on MG and BG were analyzed in vitro. In addition, the early tissue reaction of CD-1 mouse to these materials was analyzed by means of histological and histomorphometrical analysis.
Results: MG showed a three-fold higher thickness both in dry and wet conditions, when compared to BG. The spongy surface of BG significantly differed from that of MG. Cells showed a characteristic proliferation pattern on the different materials in vitro. Fibroblasts tended to proliferate on the compact layers of both collagens, with the highest values on the compact side of BG. In vivo, at day three both materials demonstrated good tissue integration, with a mononuclear cell sheet of fibroblasts on all surfaces, however, without penetrating into the materials.
Conclusions: The findings of this study showed that MG and BG facilitate cell proliferation on both of their surfaces in vitro. In vivo, these two materials induce a comparable early tissue reaction, while serving as cell occlusive barriers.
The permeability and inflammatory tissue reaction to Mucomaix® matrix (MM), a non- cross-linked collagen-based matrix was evaluated in both ex vivo and in vivo settings. Liquid platelet rich fibrin (PRF), a blood concentrate system, was used to assess its capacity to absorb human proteins and interact with blood cells ex vivo. In the in vivo aspect, 12 Wister rats had MM implanted subcutaneously, whereas another 12 rats (control) were sham-operated without biomaterial implantation. On days 3, 15 and 30, explantation was completed (four rats per time-point) to evaluate the tissue reactions to the matrix. Data collected were statistically analyzed using analysis of variance (ANOVA) and Tukey multiple comparisons tests (GraphPad Prism 8). The matrix absorbed the liquid PRF in the ex vivo study. Day 3 post-implantation revealed mild tissue inflammatory reaction with presence of mononuclear cells in the implantation site and on the biomaterial surface (mostly CD68-positive macrophages). The control group at this stage had more mononuclear cells than the test group. From day 15, multinucleated giant cells (MNGCs) were seen in the implantation site and the outer third of the matrix with marked increase on day 30 and spread to the matrix core. The presence of these CD68-positive MNGCs was associated with significant matrix vascularization. The matrix degraded significantly over the study period, but its core was still visible as of day 30 post-implantation. The high permeability and fast degradation properties of MM were highlighted.
Tumor-associated macrophages, angiogenesis, and tumor cell migration in oral squamous cell carcinoma
(2017)
Objective: To investigate the relationship between tumor-associated macrophages (TAMs), neovascularization, and tumor cell migration in oral squamous cell carcinoma (OSCC) of an African subpopulation.
Materials and Methods: Twenty OSCC paraffin blocks underwent immunohistochemistry to TAM1 (CCR7), TAM2 (CD206), Twist, E-cadherin, N-cadherin, and CD34. The relative percentage of CCR7 + and CD206 + cells to overall immune cell population was calculated for three high power fields and an average was taken. TAM-related microvessel density (MVD) was determined as the mean of the three recorded values. Cases that had no CD34 + vessels adjacent to the TAMs region were regarded as having an MVD score of 0.
Results: Ten cases (50%) expressed greater CCR7 activity than CD206, seven cases (35%) expressed approximately equal activity of CCR7 and CD206, while three cases (15%) expressed greater activity of CD206 than CCR7. Twist expression was strong in some cases with strong N-cadherin and weak E-cadherin, but the expression of Twist was not consistently high in all cases that expressed strong N-cadherin and weak E-cadherin.
Conclusions: TAMs distribution suggested antitumor activity and the potential for tumor metastasis was only partly due to Twist-mediated epithelial–mesenchymal transition.
Osteocalcin, Azan and Toluidine blue staining in fibrous dysplasia and ossifying fibroma of the jaws
(2018)
Background: Fibrous dysplasia (FD) and ossifying fibroma (OF) are fibro-osseous lesions (FOLs) having several overlaps that may make final diagnosis difficult by hematoxylin and eosin (H/E) alone.
Aim: This study seeks to detect any association between Azan and Toluidine blue staining as compared with osteocalcin in FD and OF diagnosis.
Methods:Forty formalin fixed paraffin embedded (FFPE) blocks of FD and OF were prepared for Azan, Toluidine blue and osteocalcin staining. Brown staining of calcified structures was considered as positive for osteocalcin. Scoring for Azan and Toluidine blue was evaluated based on intensity and localization. Level of agreement of original and revised diagnosis was determined.
Results: Six (40%) of 15 FD were corroborated by osteocalcin. Eight cases initially diagnosed as OF were revised to FD. There were 25 OF according to H/E, and 17 (68%) were validated by osteocalcin. Measure of agreement between histology and immunohistochemistry was 0.081; p = .608. Eleven (42.3%) OF expressed strong toluidine blue staining of the intervening fibrous connective tissue stroma while only 2 (14.2%) FD showed similar staining, this difference was statistically significant [p = .001].
Conclusions: Histomorphometric analysis with Toluidine blue may reduce diagnostic errors of OF and FD.
Introduction: ameloblastoma is a slow growing, painless odontogenic swelling which can attain sizes that result in severe deformities of the craniofacial complex. It is the most commonly encountered odontogenic tumor in Nigeria. Surgical intervention is currently the method of treatment; however identification of altered molecular pathways may inform chemotherapeutic potential. The Protein Patched homolog 1 (PTCH-1) is overexpressed in ameloblastoma. Also, mutation in the MDM2 gene can reduce the tumor suppressor function of p53 and promote ameloblastoma growth. No study however has characterized the molecular profile of African cases of ameloblastoma with a view to developing chemotherapeutic alternatives. The objective was to characterize the PTCH-1 genetic profile of Ameloblastoma in Nigerian patients as a first step in investigating its potential for chemotherapeutic intervention.
Methods: twenty-eight FFPE blocks of ameloblastoma cases from Nigerian patients were prepared for antibody processing to PTCH-1 (Polyclonal Anti-PTCH antibody ab39266) and MDM2 (Monoclonal Anti-MDM2 antibody (2A10) ab16895). Cytoplasmic brown staining was considered as positive for PTCH while nuclear staining was positive for MDM2.
Results: moderate and strong expressions for PTCH in ameloblast and stellate reticulum were 78.6% and 60.7% respectively. Only 3 (10.7%) cases expressed MDM2.
Conclusion: the importance of our study is that it supports, in theory, anti-PTCH/SHH chemotherapeutics for Nigerian ameloblastoma cases and also infers the possible additional use of anti-p53 agents.
Objectives: The aim of the present study was to characterize the cellular reaction to a xenogeneic resorbable collagen membrane of porcine origin using a subcutaneous implantation model in Wistar rats over 30 days.
Materials and methods: Ex vivo, liquid platelet-rich fibrin (PRF), a leukocyte and platelet-rich cell suspension, was used to evaluate the blood cell membrane interaction. The material was implanted subcutaneously in rats. Sham-operated rats without biomaterial displayed physiological wound healing (control group). Histological, immunohistological, and histomorphometric analyses were focused on the inflammatory pattern, vascularization rate, and degradation pattern.
Results: The membrane induced a large number of mononuclear cells over the observation period, including lymphocytes, macrophages, and fibroblasts. After 15 days, multinucleated giant cells (MNGCs) were observed on the biomaterial surface. Their number increased significantly, and they proceeded to the center of the biomaterial on day 30. These cells highly expressed CD-68, calcitonin receptor, and MMP-9, but not TRAP or integrin-ß3. Thus, the membrane lost its integrity and underwent disintegration as a consequence of the induction of MNGCs. The significant increase in MNGC number correlated with a high rate of vascularization, which was significantly higher than the control group. Physiological wound healing in the control group did not induce any MNGCs at any time point. Ex vivo blood cells from liquid-PRF did not penetrate the membrane.
Conclusion: The present study suggests a potential role for MNGCs in biomaterial degradation and questions whether it is beneficial to accept them in clinically approved biomaterials or focus on biomaterials that induce only mononuclear cells. Thus, further studies are necessary to identify the function of biomaterial-induced MNGCs.
Clinical relevance: Understanding the cellular reaction to biomaterials is essential to assess their suitability for specific clinical indications and outline the potential benefit of specific group of biomaterials in the respective clinical indications.
Background: Computerized virtual patients (VP) have spread into many areas of healthcare delivery and medical education. They provide various advantages like flexibility in pace and space of learning, a high degree of teaching reproducibility and a cost effectiveness. However, the educational benefit of VP as an additive or also as an alternative to traditional teaching formats remains unclear. Moreover, there are no randomized-controlled studies that investigated the use of VP in a dental curriculum. Therefore, this study investigates VP as an alternative to lecturer-led small-group teaching in a curricular, randomized and controlled setting.
Methods: Randomized and controlled cohort study. Four VP cases were created according to previously published design principles and compared with lecturer-led small group teaching (SGT) within the Oral and Maxillofacial Surgery clerkship for dental students at the Department for Cranio-, Oral and Maxillofacial Plastic Surgery, Goethe University, Frankfurt, Germany. Clinical competence was measured prior (T0), directly (T1) and 6 weeks (T2) after the intervention using theoretical tests and a self-assessment questionnaire. Furthermore, VP design was evaluated using a validated toolkit.
Results: Fifty-seven students (VP = 32; SGT = 25) agreed to participate in the study. No competence differences were found at T0 (p = 0.56). The VP group outperformed (p < .0001) the SGT group at T1. At T2 there was no difference between both groups (p = 0.55). Both interventions led to a significant growth in self-assessed competence. The VP group felt better prepared to diagnose and treat real patients and regarded VP cases as a rewarding learning experience.
Conclusions: VP cases are an effective alternative to lecture-led SGT in terms of learning efficacy in the short and long-term as well as self-assessed competence growth and student satisfaction. Furthermore, integrating VP cases within a curricular Oral and Maxillofacial Surgery Clerkship is feasible and leads to substantial growth of clinical competence in undergraduate dental students.
Background: Recent advances in 3D printing technology have enabled the emergence of new educational and clinical tools for medical professionals. This study provides an exemplary description of the fabrication of 3D‐printed individualised patient models and assesses their educational value compared to cadaveric models in oral and maxillofacial surgery.
Methods: A single‐stage, controlled cohort study was conducted within the context of a curricular course. A patient's CT scan was segmented into a stereolithographic model and then printed using a fused filament 3D printer. These individualised patient models were implemented and compared against cadaveric models in a curricular oral surgery hands‐on course. Students evaluated both models using a validated questionnaire. Additionally, a cost analysis for both models was carried out. P‐values were calculated using the Mann‐Whitney U test.
Results: Thirty‐eight fourth‐year dental students participated in the study. Overall, significant differences between the two models were found in the student assessment. Whilst the cadaveric models achieved better results in the haptic feedback of the soft tissue, the 3D‐printed individualised patient models were regarded significantly more realistic with regard to the anatomical correctness, the degree of freedom of movement and the operative simulation. At 3.46 € (compared to 6.51 €), the 3D‐printed patient individualised models were exceptionally cost‐efficient.
Conclusions: 3D‐printed patient individualised models presented a realistic alternative to cadaveric models in the undergraduate training of operational skills in oral and maxillofacial surgery. Whilst the 3D‐printed individualised patient models received positive feedback from students, some aspects of the model leave room for improvement.
Objective: The aim of this study was to retrospectively review the midface and orbital floor fractures treated at our institution with regard to epidemiological aspects, surgical treatment options and postoperative complications and discuss this data with the current literature. Study design: One thousand five hundred and ninety-four patients with midface and orbital fractures treated at the Department of Oral, Cranio-Maxillofacial and Facial Plastic Surgery of the Goethe University Hospital in Frankfurt (Germany) between 2007 and 2017 were retrospectively reviewed. The patients were evaluated by age, gender, etiology, fracture pattern, defect size, surgical treatment and complications. Results: The average patient age was 46.2 (± 20.8). Most fractures (37.5%) occurred in the age between 16 and 35. Seventy-two percent of patients were male while 28% were female. The most common cause of injury was physical assault (32.0%) followed by falls (30.8%) and traffic accidents (17.0%). The average orbital wall defect size was 297.9 mm2 (± 190.8 mm2). For orbital floor reconstruction polydioxanone sheets (0.15 mm 38.3%, 0.25 mm 36.2%, 0.5 mm 2.8%) were mainly used, followed by titanium meshes (11.5%). Reconstructions with the 0.15 mm polydioxanone sheets showed the least complications (p < 0.01, r = 0.15). Eighteen percent of patients who showed persistent symptoms and post-operative complications: 12.9% suffered from persistent hypoesthesia, 4.4% suffered from post-operative diplopia and 3.9% showed intra-orbital hematoma. Conclusion: Results of the clinical outcome in our patients show that 0.15 mm resorbable polydioxanone sheets leads to significantly less post-operative complications for orbital floor defects even for defects beyond the recommended 200 mm2.
Purpose: To retrospectively compare the high-angled sagittal split osteotomy (HOO) and the bilateral sagittal split osteotomy (BSSO) for the correction of skeletal dysgnathias regarding intra- and postoperative complications.
Methods: The electronic medical records of all patients treated with an orthognathic surgery at the Department for Oral, Maxillofacial and Facial Plastic Surgery, University Hospital Frankfurt, Germany, between the years 2009 and 2019 were retrospectively reviewed.
Results: Two hundred ninety-one patients were included. The overall complication rates were 19.78% (BSSO) compared to 12.5% (HOO) (p = 0.14). Significant differences were found regarding the operation time (HOO < BSSO, p = 0.02), material failure (HOO > BSSO, p = 0.04), and early recurrence requiring revision surgery (HOO < BSSO, p = 0.002). The use of a ramus plate significantly reduced the risk of plate failure (2.8% < 13.6%, p = 0.05). More bad splits (p = 0.08) and early sensory disorders (p = 0.07) occurred in the BSSO group.
Conclusion: The HOO presents a possible alternative to the BSSO since newly developed osteosynthesis material significantly reduces the risk of material failure. The BSSO is accompanied by higher risks of developing complications like a bad split and sensory disorders but, however, remains the standard for large anterior–posterior transpositions of the mandible.
Background: The feedback given to students plays an important role in their efficiency related to learning practical skills. In the present study, diverse feedback modalities have been investigated. Our hypothesis is that individualized and unsupervised video feedback can produce a similar learning experience as performing practical skills in an oral and maxillofacial surgery setting with conventional direct expert feedback (control group).
Methods: This prospective, randomized, controlled, and blinded study compared direct expert feedback (DEF), individualized video feedback (IVF) and unsupervised video feedback (UVF). The participants were fourth-year dental students from University Goethe in Frankfurt. The students were assigned to one of the three feedback methods (n = 20 per group) using simple randomization. All participants watched an instruction video for an interdental (‘Ernst’) ligature and periphery venous catheterization. Next, the students were video recorded performing the tasks by themselves (pre-test). Following this, every student received feedback using one of the above-mentioned feedback modalities. The participants then performed the same task again while being video recorded (post-test) to measure the acquired competence. Six weeks later, the students participated in an objective structured clinical examination (OSCE) to evaluate their long-term knowledge retention. All examiners were blinded regarding the students’ instructional approach and their affiliation in terms of the learning group.
Results: For the interdental ligature, we found significant improvements in performance in each feedback modality group between the pre-test and post-test (p < 0.001). UVF had the strongest effect on performance time. The comparison between each group in the post-test showed no significant differences between the three groups.
Conclusion: This study showed that IVF and UVF can be considered an alternative or adjunct to conventional methods (i.e. DEF) when learning procedural skills in oral and maxillofacial surgery. However, DEF showed to be the most effective method of feedback and therefore preferable in teaching.
Objectives: To assess and compare the efficacy and safety of autogenous tooth roots (TRs) and autogenous bone blocks (ABs) for combined vertical and horizontal alveolar ridge augmentation and two-stage implant placement.
Materials and Methods: A total of 28 patients in need of implant therapy and vertical ridge augmentation were allocated to parallel groups receiving either healthy autogenous tooth roots (e.g., retained wisdom teeth) (n = 14, n = 15 defects) or cortical autogenous bone blocks harvested from the retromolar area (n = 14, n = 17 defects). After 26 weeks of submerged healing, the clinical reduction in ridge height (RH) deficiency was defined as the primary outcome.
Results: Both surgical procedures were associated with a similar mean reduction in RH deficiency values, amounting to 4.48 ± 2.42 mm (median: 4.25; 95% CI: 3.08–5.88) in the TR group and 4.46 ± 3.31 mm (median: 3.00; 95% CI: 2.54–6.38) in the AB group (p = .60, Mann–Whitney U-test). In all patients investigated, the reduction in RH deficiency values allowed for an adequate implant placement at the respective sites. The frequency of complications (e.g., soft tissue dehiscences) was low (TR: n = 4; AB: n = 0).
Conclusions: Up to staged-implant placement, both TR and AB grafts appeared to be associated with comparable efficacy and safety for combined vertical and horizontal alveolar ridge augmentation.
Background: To assess the influence of ridge preservation procedures on the healing of extraction sockets under antiresorptive therapy.
Material and Methods: A total of 10 Dutch Belted rabbits were randomly allocated to either the intravenous administration of amino‐bisphosphonate (zoledronic acid) (Za) (n = 5) or a negative control group (no Za [nZa]) (n = 5). At 6 months, the mandibular and maxillary molars were extracted and the four experimental sites randomly allocated to the following subgroups: (a) socket grafting using a collagen‐coated natural bone mineral (BOC) + primary wound closure, (b) coronectomy (CO), or (c) spontaneous healing + primary wound closure (SP). Za medication was continued for another 4 months. Histomorphometrical analyses considered, for example, crestal hard tissue closure of the extraction site (C) and mineralized tissue (MT) formation.
Results: Za‐SP was associated with an incomplete median C (31.76% vs 100% in nZa‐SP) and signs of bone arrosion along the confines of the socket. BOC had no major effects on increases in C and MT values in the Za group. CO commonly resulted in an encapsulation and partial replacement resorption of residual roots by MT without any histological signs of osteonecrosis.
Conclusions: (a) Za‐SP was commonly associated with a compromised socket healing and signs of osteonecrosis, (b) BOC had no major effect on socket healing in the Za group, and (c) CO at noninfected teeth might be a feasible measure for the prevention of a Za‐related osteonecrosis of the jaw.
Introduction: The aim of this study was to clinically assess the capacity of a novel bovine pericardium based, non-cross linked collagen matrix in root coverage.
Methods: 62 gingival recessions of Miller class I or II were treated. The matrix was adapted underneath a coronal repositioned split thickness flap. Clinical values were assessed at baseline and after six months.
Results: The mean recession in each patient was 2.2 mm at baseline. 6 Months after surgery 86.7% of the exposed root surfaces were covered. On average 0,3 mm of recession remained. The clinical attachment level changed from 3.5 ± 1.3 mm to 1,8 ( ± 0,7) mm during the observational time period. No statistically significant difference was found in the difference of probing depth. An increase in the width of gingiva was significant. With a baseline value of 1.5 ± 0.9 mm an improvement of 2.4 ± 0.8 mm after six month could be observed. 40 out of 62 recessions were considered a thin biotype at baseline. After 6 months all 62 sites were assessed thick.
Conclusions: The results demonstrate the capacity of the bovine pericardium based non-cross linked collagen matrix for successful root coverage. This material was able to enhance gingival thickness and the width of keratinized gingiva. The percentage of root coverage achieved thereby is comparable to existing techniques. This method might contribute to an increase of patient's comfort and an enhanced aesthetical outcome.
Introduction: To determine the esthetic outcome of implant-based reconstructions after autologous and allogeneic bone grafting.
Methods: From 2003 to 2009, 67 patients underwent alveolar ridge augmentation and were enrolled in the study, 41 meet the inclusion criteria and 31 agreed to take part in the study. Patients were 18-69 years old (mean: 49.3 ± 13.8 years), and predominantly female. Patients received bone block grafts either autologous (n = 48) (AUBB) or allografts (ABB) (n = 19). Implants were inserted 4-7 months (autografts) or 5-6 months (allografts) after bone grafting. The Pink Esthetic Score (PES) as well as radiographic and subjective assessments were employed for the outcome analysis. The PES was assessed twice within one month based on digital photographic images that were randomly rearranged between evaluations by three independent, experienced investigators.
Results: Across all observations and investigators, the average PES was 7.5 ± 2.6 without differences between implants inserted in auto- and allografted bone, respectively. Patients assessed the allograft procedures as less painful and would have repeated it more often. The intra-rater reliability was excellent (correlation coefficients 0.7-0.9). The inter-observer agreement was lower (correlation coefficients 0.6-0.8).
Conclusions: Bone grafting with ABB allografts yields equivalent results to autologous grafting, and patients appreciate the omission of bone harvesting. The PES is a reliable method but should be performed by the same individual.
Introduction: The treatment of carious lesions is one of the most fundamental competencies in daily dental practice. However, many commercially available training models lack in reality regarding the simulation of pathologies such as carious lesions. 3D printed models could provide a more realistic simulation. This study provides an exemplary description of the fabrication of 3D printed dental models with carious lesions and assesses their educational value compared to commercially available models in conservative dentistry.
Materials and Methods: A single-stage, controlled cohort study was conducted within the context of a curricular course. A stereolithographic model was obtained from an intraoral scan and then printed using fused deposition modelling. These models were first piloted by experts and then implemented and compared against commercial models in a conservative dentistry course. Experts and students evaluated both models using a validated questionnaire. Additionally, a cost analysis for both models was carried out.
Results: Thirteen dentists and twenty-seven 5th year dental students participated in the study. The 3D printed models were rated significantly more realistic in many test areas. In particular, the different tactility and the distinction in colour was rated positively in the 3D printed models. At 28.29€ (compared to 112.36€), the 3D printed models were exceptionally cost-efficient.
Conclusions: 3D printed dental models present a more realistic and cost-efficient alternative to commercial models in the undergraduate training of conservative dentistry.
Objectives: To evaluate peri-implant tissue dimensions following nonsurgical (NS) and surgical therapy (S) employing different decontamination protocols of advanced ligature-induced peri-implantitis in dogs.
Material & Methods: Peri-implantitis defects (n = 5 dogs, n = 30 implants) were randomly and equally allocated in a split-mouth design to NS or S treatment using either an Er:YAG laser (ERL), an ultrasonic device (VUS), or plastic curettes + local application of metronidazole gel (PCM), respectively. Horizontal bone thickness (hBT) and soft tissue thickness (hMT) were measured at different reference points: (v0) at the marginal portion of the peri-implant mucosa (PM); (v1) at 50% of the distance from PM to bone crest (BC); (v2) at the BC; (v3) at the most coronal extension of the bone-to-implant contact. Vertical peri-implant tissue height was calculated from PM to BC.
Results: All of the treatment groups showed a gradual hMT increase from v0 to the v2 reference point, followed by a reduction from v2 to the v3 region. The S-VUS subgroup tended to be associated with higher hMT values at the v0 region than the NS-VUS subgroup (0.44 mm versus 0.31 mm). PM-BC distance varied from 2.22 to 2.83 mm in the NS group, and from 2.07 to 2.38 in the S group.
Conclusion: Vertical and horizontal peri-implant tissue dimensions were similar in different treatment groups.
Introduction: The aim of this study was to ascertain whether the testing format of an OSPE (Objective Structured Practical Examination) in conservative dentistry (sixth semester) predicts the scores on the practical section of the state examination (11th semester) in the same subject. Taking general student profiles into consideration (score on the school-leaving exam [Abitur], score on the preliminary exam in dental medicine [Physikum], length of university study, cohorts, and sex), we also investigated if any correlations or differences exist in regard to the total and partial scores on the OSPE and the corresponding state examination.
Methods: Within the scope of this longitudinal retrospective study, exam-specific data spanning 11 semesters for dental students (N=223) in Frankfurt am Main were collected and analyzed. Statistical analysis was carried out by calculating Spearman rank correlations, partial correlations, Pearson’s correlation coefficients, and multiple regressions (SPSS Statistics 21, IBM Corporation, New York).
Results: The results show that the OSPE (Cronbach’s α=.87) correlates with level of success on the practical section of the state exam in conservative dentistry (p=.01, r=.17). Length of university study also emerged to correlate significantly with the state exam score (p=.001, r=.23). Together, these two variables contribute significantly to predicting the state exam score (p=.001, R2=.076). This was seen extensively among female students. It was also discovered that these female students had higher school-leaving exam scores than male students (F=6.09, p=.01, η2=.027), and that a significant correlation between scores on the Physikum (preliminary exam in dental medicine) and OSPE scores existed only for male students (r=.17, p=.01).
Conclusion: This study was able to demonstrate the predictive effect of a clinical OSPE regarding scores achieved on the state exam. Taking the limitations of this study into account, we are able to recommend using the OSPE testing format in the sixth semester during the clinical phase of dental study.