Refine
Year of publication
- 2017 (6) (remove)
Document Type
- Master's Thesis (3)
- Doctoral Thesis (2)
- Bachelor Thesis (1)
Has Fulltext
- yes (6)
Is part of the Bibliography
- no (6)
Keywords
- Gabor lens (2)
- Gabor-Linse (2)
- Beschleunigerphysik (1)
- CO2 emission reduction targets (1)
- Elektronenwolke (1)
- FAIR (1)
- LINAC (1)
- Ladder-RFQ (1)
- Protonenplasmen (1)
- RFQ (1)
Institute
- Physik (6)
Cleaning an ion beam from unwanted fractions is crucial for intense ion beams. This thesis will explore separation methods using a collimation channel, electric and magnetic dipoles and a velocity selector for low intensity beams on an experimental basis. In addition, statistical data of degassing events during the commissioning of a pentode extraction system for beam energies from 20 - 120keV will be presented.
Im Rahmen dieser Arbeit wird darauf eingegangen, welche Anpassungen erforderlich sind, um Protonendichten vergleichbar zu bereits erzeugten Elektronendichten in Gabor-Linsen zu erhalten. Zur Vorbereitung zukünftiger Experimente werden vergleichende Simulationen zum Einschluss der Ladungsträgerdichten durchgeführt und die Strahldynamik bei der Wechselwirkung eines positiven Ionenstrahls mit einem in einer Gabor-Linse eingeschlossenen Protonenplasma untersucht. Die Ergebnisse der Strahldynamiksimulationen werden mit theoretischen Berechnungen vertieft, in dem die Brennweite einer Gabor-Linse, die mit einer beliebigen Teilchensorte gefüllt ist, berechnet und die Drift-Masse eingeführt wird.
Eine weitere analytische Betrachtung ist die Erweiterung der Teilchendynamik in der Gabor-Linse auf beliebige Anfangsbedingungen, in dem die dazugehörige Differentialgleichung entkoppelt und ganz allgemein gelöst wird. Die daraus berechneten Trajektorien der Teilchen führen zu einem besseren Verständnis, das weitere Anwendungen erschließen könnte.
Zur effizienten Beschleunigung von Ionen wird meist nach deren Erzeugung in einer Ionenquelle ein Radio Frequenz Quadrupol verwendet. Die vorliegende Dissertation befasst sich mit Entwicklung, Bau und Messung des Prototyps eines neuartigen Leiter-RFQs, der bei 325 MHz betrieben wird. Der Leiter-RFQ verfügt über ein neuartiges mechanisches Design und versucht die Vorteile der beiden vorrangig im Betrieb befindlichen RFQ Typen, des 4-Rod und 4-Vane RFQs, zu verbinden. Die physikalischen Parameter sind der Spezifikation des RFQs für den geplanten Protonenlinac (p-Linac) am FAIR-Projekt an der GSI Darmstadt entnommen. Darüber hinaus wird der aktuelle Planungs- und Simulationsstand eines modulierten Prototyps mit der vollen Länge von ca. 3,5 m zur Durchführung von Strahltests dargestellt.
In this work the flexibility requirements of a highly renewable European electricity network that has to cover fluctuations of wind and solar power generation on different temporal and spatial scales are studied. Cost optimal ways to do so are analysed that include optimal distribution of the infrastructure, large scale transmission, storage, and dispatchable generators. In order to examine these issues, a model of increasing sophistication is built, first considering different flexibility classes of conventional generation, then adding storage, before finally considering transmission to see the effects of each.
To conclude, in this work it was shown that slowly flexible base load generators can only be used in energy systems with renewable shares of less than 50%, independent of the expansion of an interconnecting transmission network within Europe. Furthermore, for a system with a dominant fraction of renewable generation, highly flexible generators are essentially the only necessary class of backup generators. The total backup capacity can only be decreased significantly if interconnecting transmission is allowed, clearly favouring a European-wide energy network. These results are independent of the complexity level of the cost assumptions used for the models. The use of storage technologies allows to reduce the required conventional backup capacity further. This highlights the importance of including additional technologies into the energy system that provide flexibility to balance fluctuations caused by the renewable energy sources. These technologies could for example be advanced energy storage systems, interconnecting transmission in the electricity network, and hydro power plants.
It was demonstrated that a cost optimal European electricity system with almost 100% renewable generation can have total system costs comparable to today's system cost. However, this requires a very large transmission grid expansion to nine times the line volume of the present-day system. Limiting transmission increases the system cost by up to a third, however, a compromise grid with four times today's line volume already locks in most of the cost benefits. Therefore, it is very clear that by increasing the pan-European network connectivity, a cost efficient inclusion of renewable energies can be achieved, which is strongly needed to reach current climate change prevention goals.
It was also shown that a similarly cost efficient, highly renewable European electricity system can be achieved that considers a wide range of additional policy constraints and plausible changes of economic parameters.
The aim of this thesis is finding a geometric configuration that allows electron insertion into a Gabor plasma lens in order to increase the density of the confined electrons and provide ignition conditions at parameters where ignition is not possible. First, simulations using CST and bender were conducted to investigate several geometric configurations in terms of their performance of inserting electrons manually. One particular design has been chosen as a basis for an experiment. In order to prepare the experiment, further simulations using the code bender have been conducted to investigate the density distribution that is formed inside the Gabor lens when inserting electrons transversally in compliance with the chosen design. Additionally, bender was used to investigate the impact of the initial electron energy on the distribution inside the lens. Simulations with and without space charge effects have shown a significant impact of the space charge effects on the resulting density dstribution. Therefore, space charge effects have proven to be the major electron redistribution process. A given electron source was characterised in order to find the performance under the conditions inside a Gabor lens. In particular, a transversal magnetic field that will be present in the experiment has to be compensated by shielding the inner regions of the source by a μ-metal layer. Using a μ-metal shield, transversal magnetic fields are sufficiently tolerable to perform measurements in a Gabor lens. Additionally, operating close to 100 eV electron energy yields a maximum in the emitted current. Adding a Wehnelt cylinder to the electron source furthermore improves the extracted current to roughly 1 mA. A test stand consisting of a newly designed anode for the Gabor lens, as well as a terminal for the electron source, was constructed. The electron source was thoroughly characterised in the environment of the Gabor lens and the ignition properties of the new system were evaluated. In further experiments, electron beam assisted ignition by increasing the residual gas pressure was observed and the impact of the position of the electron source on the ignition properties was investigated. In addition, ignition of a sub-critical state, that is a state consisting of potential, magnetic field and pressure that did not yet perform ignition by itself, was performed by increasing the extracted current from the electron source. Finally, the electron source was used to influence a pre-ignited plasma. The density was measured, which was increased by the use of the electron source in most cases. This project is part of the EDEN collaboration (Electron DENsity boosting) of the NNP Group at IAP Frankfurt with INFN institutes in Bologna and Catania.
Gabor lenses were invented for focusing hadron beams by the electric field of a confined electron column. A homogenous magnetic field created by a solenoid confines electrons in transverse direction while a potential well created by a cylindrical electrode system confines them longitudinally.
In this thesis the investigation and characterization of a nonneutral electron plasma (NNP) in a Gabor lens with a toroidal magnetic confinement and a 30 degree-bent anode is presented. Motivated by fundamental research on NNPs in this special environment, diagnostic methods were investigated to characterize the plasma. As a non-invasive method a PCO camera is placed in front of the experimental setup. A ring of 31 photodiodes is used inside the plasma for light intensity and distribution measurements. The experimental data is evaluated and the following results will be presented.