Refine
Document Type
- Doctoral Thesis (9)
- Master's Thesis (6)
- Bachelor Thesis (1)
Has Fulltext
- yes (16)
Is part of the Bibliography
- no (16)
Keywords
- p-Kerne (2)
- Aktivierungsmethode (1)
- Coulombdissoziation (1)
- Coulombspaltung (1)
- Gammaspektroskopie (1)
- Molybdän (1)
- Nukleare Astrophysik (1)
- Nukleosynthese (1)
- Optisches Potenzial (1)
- Physics (1)
Institute
- Physik (15)
The subject of this thesis is the experimental investigation of the neutron-capture cross sections of the neutron-rich, short-lived boron isotopes 13B and 14B, as they are thought to influence the rapid neutron-capture process (r process) nucleosynthesis in a neutrino-driven wind scenario.
The 13;14B(n,g)14;15B reactions were studied in inverse kinematics via Coulomb dissociation at the LAND/R3B setup (Reactions with Relativistic Radioactive Beams). A radioactive beam of 14;15B was produced via in-flight fragmentation and directed onto a lead-target at about 500 AMeV. The neutron breakup of the projectile within the electromagnetic field of the target nucleus was investigated in a kinematically complete measurement. All outgoing reaction products were detected and analyzed in order to reconstruct the excitation energy.
The differential Coulomb dissociation cross sections as a function of the excitation energy were obtained and first experimental constraints on the photoabsorption and the neutron-capture cross sections were deduced. The results were compared to theoretical approximations of the cross sections in question. The Coulomb dissociation cross section of 15B into 14B(g.s.) + n was determined to be s(15B;14B(g:s:)+n) CD = 81(8stat)(10syst) mb ; while the Coulomb dissociation cross section of 14B into a neutron and 13B in its ground state was found to be s(14B;13B(g:s:)+n) CD = 281(25stat)(43syst) mb: Furthermore, new information on the nuclear structure of 14B were achieved, as the spectral shape of the differential Coulomb dissociation cross section indicates a halolike structure of the nucleus.
Additionally, the Coulomb dissociation of 11Be was investigated and compared to previous measurements in order to verify the present analysis. The corresponding Coulomb dissociation cross section of 11Be into 10Be(g.s.) + n was found to be 450(40stat)(54syst ) mb, which is in good agreement with the results of Palit et al.
The 35 neutron deficient nuclides known as the p nuclei are sysnthesized mainly in the so-called γ process. Taking place in explosive supernova events, the existing seed distribution from prior nucleosynthesis is altered by photodisintegration reactions of the types (γ,n), (γ,p) and (γ,α).
The bulk of reaction rates needed in network calculations of the γ process are predicted by the Hauser-Feshbach Model. When using this theory, the largest uncertainties stem from the interaction between charged particles and nuclei described by optical model potentials.
An improvement of these potentials can be achieved by comparison to measured cross section data. However, because of the low energies of interest for nuclear astrophysics and the resulting low cross sections, suitable data are scarce.
This thesis extends the corresponding database by measurement of the reactions 165Ho(α, n), 166Er(α, n), 169Tm(p,n) and 175Lu(p,n) using the activation technique. While not particularly important for the γ process, the selected (α,n) and (p,n) reactions exhibit nearly exclusive sensitivity to the α- or proton-nucleus potential, respectively. Therefore, the results presented here are well suited to test and improve the predictive power of currently available parameterizations of these potentials
Der langsame Neutronen-Einfangprozess (s-Prozess) ist weitgehend verstanden und erforscht. Dies liegt vor allem daran, dass er im Gegensatz zu r- und p- Prozess hauptsächlich an stabilen Nukliden abläuft. Auch ist die Anzahl relevanter Reaktionen (Netzwerk) vergleichsweise klein.
Dennoch gibt es im s-Prozess viele ungeklärte Fragen. Eine dieser Fragen ist die Häufigkeitsverteilung von 86Kr in Staubkörnern von Meteoriten. Mit bisherigen Berechnungen und Simulationen dieser Szenarien konnte die Häufigkeitsverteilung von 86Kr jedoch nicht erklärt werden.
In dieser Arbeit werden die besonderen Eigenschaften von 85Kr, insbesondere sein Isomerzustand, vorgestellt und genauer untersucht. Die Häufigkeitsverteilung von 86Kr im s-Prozess wird entscheidend durch die Eigenschaften 85Kr beeinflusst. Mit den gewonnenen Daten aus dieser Arbeit wurde eine erste Simulation erstellt, die einen möglichenWeg aufzeigt, das Rätsel um die Häufigkeitsverteilung zu lösen.
Diese Arbeit beschäftigt sich mit dem Aufbau und der Kalibrierung eines Neutronendetektorarrays für niedrige Energien (Low Energy Neutron detector Array, kurz „LENA“) am kommenden R³B-Aufbau (Reactions with Relativistic Radioactive Beams) am FAIR (Facility for Antiproton and Ion Research) an der GSI in Darmstadt. Die Detektion niederenergetischer Neutronen im Bereich von 100 keV bis 1 MeV ist nötig, um Ladungsaustauschreaktionen, speziell (p,n)-Reaktionen in inverser Kinematik zu untersuchen. In diesem Energiebereich ist die Detektion äußerst schwierig, da Methoden für thermische als auch hochenergetische (100 MeV bis 1 GeV) Neutronen versagen. Neben dem Aufbau des Detektors wird die Bedeutung des Experiments für die nukleare Astrophysik verdeutlicht. Der theoretische Teil dieser Arbeit legt Grundlagen zum Verständnis für den Nachweis von Neutronen, die Funktionsweise des LENA-Detektors und den damit nachweisbaren Kernreaktionen. Des Weiteren wurde eine Simulation des Detektors mit GEANT4 (GEometry And Tracking), einer C++ orientierten Plattform für Simulationen von Wechselwirkungen von Detektormaterial mit Teilchen, durchgeführt. Die Ergebnisse wurden zur Auswertung von Messungen, die im Rahmen einer Strahlzeit im März 2011 an der Physikalisch Technischen Bundesanstalt (PTB) in Braunschweig durchgeführt wurden, herangezogen. Ziel der Arbeit ist es, die Effizienz des Detektors zu bestimmen.
The elements in the universe are mainly produced by charged-particle fusion reactions and neutron-capture reactions. About 35 proton-rich isotopes, the p-nuclei, cannot be produced via neutron-induced reactions. To date, nucleosynthesis simulations of possible production sites fail to reproduce the p-nuclei abundances observed in the solar system. In particular, the origin of the light p-nuclei 92Mo, 94Mo, 96Ru and 98Ru is little understood. The nucleosynthesis simulations rely on assumptions about the seed abundance distributions, the nuclear reaction network and the astrophysical environment. This work addressed the nuclear data input.
The key reaction 94Mo(g,n) for the production ratio of the p-nuclei 92Mo and 94Mo was investigated via Coulomb dissociation at the LAND/R3B setup at GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt, Germany. A beam of 94Mo with an energy of 500 AMeV was directed onto a lead target. The neutron-dissociation reactions following the Coulomb excitation by virtual photons of the electromagnetic field of the target nucleus were investigated. All particles in the incoming and outgoing channels of the reaction were identified and their kinematics were determined in a complex analysis. The systematic uncertainties were analyzed by calculating the cross sections for all possible combinations of the data selection criteria. The integral Coulomb dissociation cross section of the reaction 94Mo(g,n) was determined to be (571 +- 14 (stat) +- 46 (syst) ) mb. The result was compared to the data obtained in a real photon experiment carried out at the Saclay linear accelerator. The ratio of the integral cross sections was found to be 0.63 +- 0.07, which is lower than the expected value of about 0.8.
The nucleosynthesis of the light p-nuclei 92Mo, 94Mo, 96Ru and 98Ru was investigated in post-processing nucleosynthesis simulations within the NuGrid research platform. The impact of rate uncertainties of the most important production and destruction reactions was studied for a Supernova type II model. It could be shown that the light p-nuclei are mainly produced via neutron-dissociation reactions on heavier nuclei in the isotopic chains, and that the final abundances of these p-nuclei are determined by their main destruction reactions. The nucleosynthesis of 92Mo and 94Mo was also studied in different environments of a Supernova type Ia model. It was concluded that the maximum temperature and the duration of the high temperature phase determine the final abundances of 92Mo and 94Mo.
Mithilfe einer (n,γ)-Aktivierung von Germanium am Forschungsreaktor TRIGA in Mainz wurde zum einen in Hinblick auf zukünftige Experiment an der NIF eine Sensitivitätsstudie durchgeführt. Zum anderen wurden die thermischen Neutroneneinfangquerschnitte von 74Ge und 76Ge jeweils für den Einfang in den Isomer- und Grundzustand gemessen, um die Abweichungen der Daten von [Hol93] und [Mug06] zu klären. Zusätzlich wurden die Halbwertszeiten der betrachteten radioaktiven Ge-Isotope bestimmt.
Most of the elements heavier than iron are produced through neutron capture reactions in the s- and r -process. The overall path of the s-process is well understood and can be accurately reproduced in network simulations. However, there are still some neutron capture reactions of unstable nuclei involved in the s-process, which were not yet measured due to the difficulty in producing suitable targets. In those cases, theoretical models have to be used to estimate the missing cross section.
One example is the branching point nucleus 86Rb, whose neutron capture cross section cannot be directly measured due to its short half life of 18.86 days. It is, however, also possible to measure its inverse, the 87Rb(g,n) reaction in order to obtain the 86Rb(n,g) cross section through the principle of detailed balance.
Natural rubidium was irradiated with a quasi-monoenergetic photon beam in the energy range between 10.7 MeV and 16 MeV in order to investigate the photo-dissociation cross section of 87Rb. The results are presented in this thesis. Not only the total cross section of 87Rb(g,n), but also the partial production cross section of the ground and isomeric state of 84Rb through the 85Rb(g,n) reaction was measured.
Not all isotopes can be reached via neutron capture reaction, and are therefore bypassed by the s- and r -process. These 35 proton-rich isotopes are called p-nuclei and are produced in the γ-process by a chain of photo-disintegration reactions in Type II supernovae. Network calculations of Type II supernova show that the γ-process can explain the production of most p-nuclei, but some – especially 92/94Mo and 96/98Ru – are heavily underproduced. While this could be the result of deficiencies in the corresponding stellar models or insufficient knowledge of the involved reaction rates, it is also possible that the missing p-nuclei are synthesized in other production scenarios.
An alternative scenario for 92Mo is the production via a chain of proton capture reactions in Type Ia supernovae. One important reaction in this chain is the 90Zr(p,g) reaction. The reaction cross section was already measured several times, but the results were inconclusive. In the present work, the 90 Zr(p,g) reaction was measured using the in-beam gamma-ray spectroscopy technique and the discrepancies between the data sets could be largely explained.
Most of the elements in the universe are produced via charged-particle fusion reactions during the primordial nucleosynthesis and different stellar burning stages, as well as via neutron-capture reactions. Around 35 heavy, proton-rich isotopes are bypassed by those reaction paths, the p nuclei. A series of photo-disintegration reactions occurring in supernovae, called the γ process, was suggested as a mechanisms to produce the p nuclei. Numerical simulations of the γ process have been unable to reproduce the observed abundances of the light p isotopes. Recent models showed that a series of proton capture reactions could provide the observed abundances. Hence, the cross sections of the crucial capture reactions have to be measured in order to test those assumptions.
Radiative proton captures in addition to the γ-process could reproduce the observed abundance pattern. This thesis presents preparations of a proton capture measurement on the radioactive 91Nb in standard kinematics with a calorimetric 4π setup. The 91Nb(p,γ)92Mo reaction might be the key to explain the production of one of the most abundant p-nuclei, 92Mo. So far, no experimental data for this reaction is available.
We produced a sample of 91Nb, with a half-life of 680 yr, at the Physikalisch Technische Bundesanstalt in Braunschweig, Germany, by irradiating 92Mo with protons in the energy range of 12 – 20MeV. 91Nb was produced via the reaction 92Mo(p,2p)91Nb and via 92Mo(p,pn)91Mo, where 91Mo decays to 91Nb with a half-life of 15.5min. To predict the amount of produced 91Nb the cross section of 92Mo(p, 2p) was measured. It was found to be higher than the value given by theoretical calculations with TALYS. Finally, 91Nb was chemically separated from the molybdenum carried at Paul-Scherrer- Institut, Villigen, Switzerland.
In-beam total absorption cross-section measurement of the reaction 91Nb(p,γ)92Mo with 2 MeV protons at FRANZ is planed with the produced 91Nb. A 4π BaF2 detector consisting of 41 crystals will be used. During this experiment we will measure the sum energy and the multiplicity of each event. The freshly produced 91Nb constitutes only a minor component of the sample material. The sum energy and multiplicity are crucial to distinguish the desired 91Nb(p,γ) from all the other more dominant reactions. The expected multiplicity and the efficiency of the setup were carefully simulated with DICEBOX and GEANT4. It was possible to show that background reactions can be effectively suppressed. The most important background contributions could be identified and result from 92Mo(p,γ), 19F(p,γ), and 19F(p,α).
Im Rahmen dieser Arbeit sollte ein bereits im Jahr 1989 gebauter Neutronenkollimator für den zukünftigen Einsatz an der Frankfurter Neutronenquelle am Stern Gerlach Zentrum (FRANZ) getestet und simuliert werden.
Hierfür wurde der Neutronenkollimator zunächst probeweise aufgebaut und die einzelnen Bauteile ausgemessen. Zunächst wurde die Zusammensetzung der Kollimatorbauteile überprüft und deren Dichte bestimmt. Zu diesem Zweck wurde mit einigen ausgesuchten Bauteilen des Kollimators eine Gammatransmissionsmessung mit Na-22 und Ba-133 als Gammaquelle durchgeführt. Die Messwerte dieser Messung wurden ausgewertet und mit entsprechend angefertigten Simulationen mit GEANT 3 verglichen.
Für die Simulationen wurden die Bauteile, mit denen die Messung durchgeführt wurde, detailgetreu und mit der zu bestätigenden Zusammensetzung sowie einer geschätzten Dichte programmiert. Über die Anpassung der Simulationsergebnisse an die experimentellen Werte, konnte so die Materialzusammensetzung bestätigt und für die jeweiligen Bauteile jeweils eine Dichte ermittelt werden. Für das Lithiumcarbonatrohr wurde eine Dichte von 1,422 g/cm³ ermittelt, für die drei Bauteile aus Borcarbid jeweils 1,169 g/cm³, 1,073 g/cm³, 0,832 g/cm³. Aufgrund von vielen produktionsbedingten, unterschiedlich stark ausgeprägten Lufteinschlüsse in den Borcarbidbauteilen des Kollimators, konnte keine identische Dichte für alle Bauteile gefunden werden.
Nach Untersuchung des Kollimators wurde der Neutronendurchgang mit dem Simulationspaket GEANT 3 simuliert. Die vollständige Geometrie des Kollimators wurde in GEANT 3 programmiert und dabei Bohrlöcher und Besonderheiten einzelner Bauteile berücksichtigt. Um die Simulationszeit zu verkürzen, wurde der Teilchendurchgang durch den gesamten Kollimator nicht in einem Durchgang simuliert, sondern stückweise in vier Stufen entlang des Kollimators. Um die Komplexität der Simulation zu beschränken wurde für alle Kollimatorbauteile aus Borcarbid ein Dichtewert eingesetzt, jedoch jede Simulationsreihe mit den drei verschiedenen Werten, die bei der Gammatransmissionsmessung ermittelt wurden, durchgeführt.
Beim anschließenden Vergleich der Simulationsergebnisse, konnte zwischen den einzelnen Dichtewerten kein signifikanter Unterschied erkannt werden. Die Unsicherheiten in der Dichtebestimmung sind daher vernachlässigbar.
Jede Simulationsreihe wurde mit zwei verschiedenen Neutronenverteilungen durchgeführt: eine Neutronenverteilung bei 1,92 MeV Protonenenergie und eine bei 2 MeV Protonenenergie.
Anhand der Simulationsergebnisse konnte ermittelt werden, dass die auf den Detektor eintreffende Neutronenintensität bis zu einem Abstand von etwa 20 cm vom Strahlachsenzentrum um Faktor 4·10-5 geschwächt wird. Ab 20 cm Strahlachsenabstand beträgt die Transmission der Neutronen etwa 10-3.
Die Bleiabschirmung, die an den Kollimator montiert wird und den Detektor vor den infolge von Neutroneneinfängen emittierten Gammaquanten vor dem Detektor abschirmen soll, reduziert die Zahl der Gammaquanten ebenfalls um Faktor 10-4.
Für den zukünftigen Einsatz des Neutronenkollimators an FRANZ müssen zunächst die fehlenden Kollimatorbauteile ersetzt oder nachgebaut werden. Dazu gehören zwei zylinderförmige innere Einsätze aus Borcarbid sowie eine Verlängerung des Innenrohrs aus Lithiumcarbonat. Neue Geometrien oder Materialzusammensetzungen können durch leichte Modifikation der bereits in GEANT 3 programmierten Kollimator-geometrie getestet und untersucht werden.
Für die Positionierung des Kollimators und Aufstellung vor dem 4 π BaF2-Detektor muss zusätzlich eine Platte angefertigt werden, an welche die Bleiabschirmung montiert und auf welcher der Kollimator stabil aufgebaut werden kann. Nach Fertigstellung der fehlenden Bauteile und der Platte, kann der Kollimator aufgebaut und in der Praxis getestet werden.