Refine
Year of publication
Document Type
- Doctoral Thesis (38) (remove)
Has Fulltext
- yes (38)
Is part of the Bibliography
- no (38)
Keywords
- Antigen carrier (1)
- Binding kinetic (1)
- Corynebakterium efficiens (1)
- Fatty Acid Synthase (1)
- Fatty Acids (1)
- Fatty acid synthases (1)
- Fettsäuresynthase (1)
- Fettsäuresynthase Typ I (1)
- Flavin homeostasis (1)
- Inthraszentin (1)
Institute
Xenorhabdus and Photorhabdus bacteria are gaining more and more attention as a subject of research because of their unique yet similar life cycle with nematodes and insects. This work focused on the secondary metabolites that are produced by Xenorhabdus and Photorhabdus. With the help of modern HPLC-MS methodologies and increasingly available bacterial genome sequences, the structures of unknown secondary metabolites could be elucidated and thus their biosynthesis pathways could be proposed, too.
The first paper reported 17 depsipeptides termed xentrivalpeptides produced by the bacterium Xenorhabdus sp. 85816. Xentrivalpeptide A could be isolated from the bacterial culture as the main component. The structure of xentrivalpeptide A was elucidated by NMR and the Marfey´s method. The remaining xentrivalpeptides were exclusively identified by feeding experiments and MS fragmentation patterns.
The second paper described the discovery and isolation of xenoamicin A from Xenorhabdus mauleonii DSM17908. Additionally, other xenoamicin derivatives from Xenorhabdus doucetiae DSM17909 were analyzed by means of feeding experiments and MS fragmentation patterns. The xenoamicin biosynthesis gene cluster was identified in Xenorhabdus doucetiae DSM17909.
The manuscript for publication focused on the biosynthesis of anthraquinones in Photorhabdus luminescens. The Type II polyketide synthase for the biosynthesis of anthraquinone derivatives was discovered in P. luminescens in a previous publication by the Bode group,1 in which a partial reaction mechanism for the biosynthesis has been proposed. The manuscript reported in this thesis however elucidated the biosynthetic mechanisms in a greater detail as compared to the previous publication. Particularly, the biosynthetic mechanism was deciphered through heterologous expression of anthraquinone biosynthesis (ant) genes in E. coli. Additionally, deactivation of the genes antG encoding a putative CoA ligase and antI encoding a putative hydrolase, was performed in P. luminescens. Selected ant genes were over-expressed in E. coli as well as the corresponding proteins purified for in vitro assays. Model compounds were chemically synthesized as possible substrates of AntI and were used for in vitro assays. Here, it was revealed that the CoA ligase AntG played an essential role in the activation of the ACP AntF. Furthermore, a chain shortening mechanism by the hydrolase AntI was identified and was further confirmed by in vitro assays using model compounds. Additionally, this chain shortening mechanism was supported by homology based structural modeling of AntI.
The application of natural products (NPs) as drugs and lead compounds has greatly improved human health over the past few decades. Despite their success, we still need to find new NPs that can be used as drugs to combat increasing drug resistance via new modes of action and to develop safer treatments with less side effects.
Entomopathogenic bacteria of Xenorhabdus and Photorhabdus that live in mutualistic symbiosis with nematodes are considered as promising producers of NPs, since more than 6.5% of their genomes are assigned to biosynthetic gene clusters (BGCs) responsible for production of secondary metabolites. The investigation on NPs from Xenorhabdus and Photorhabdus can not only provide new compounds for drug discovery but also help to understand the biochemical basis involved in mutualistic and pathogenic symbiosis of bacteria, nematode host and insect prey.
Nonribosomal peptides (NRPs) are a large class of NPs that are mainly found in bacteria and fungi. They are biosynthesized by nonribosomal peptide synthetases (NRPSs) and display diverse functions, representing more than 20 clinically used drugs. Although a large number of NRPs have been identified in Xenorhabdus and Photorhabdus, the advanced genome sequencing and bioinformatic analysis indicate that these bacteria still have many unknown NRPS-encoding gene clusters for NRP production that are worth to explore. Therefore, this thesis focuses on the discovery, biosynthesis, structure identification, and biological functions of new NRPs from Xenorhabdus and Photorhabdus.
The first publication describes the isolation and structure elucidation of seven new rhabdopeptide/xenortide-like peptides (RXPs) from X. innexi, incorporating putrescine or ammonia as the C-terminal amines. Bioactivity testing of these RXPs revealed potent antiprotozoal activity against the causative agents of sleeping sickness (Trypanosoma brucei rhodesiense) and malaria (Plasmodium falciparum), making them the most active RXP derivatives known to date. Biosynthetically, the initial NRPS module InxA might act iteratively with a flexible methyltransferase activity to catalyze the incorporation of the first five or six N-methylvaline/valine to these peptides.
The second publication focuses on the structure elucidation of seven unusual methionine-containing RXPs that were found as minor products in E. coli carrying the BGC kj12ABC from Xenorhabdus KJ12.1. To confirm the proposed structures from detailed HPLC-MS analysis, a solid-phase peptide synthesis (SPPS) method was developed for the synthesis of these partially methylated RXPs. These RXPs also exhibited good effects against T. brucei rhodesiense and P. falciparum, suggesting RXPs might play a role in protecting insect cadaver from soil-living protozoa to support the symbiosis with nematodes.
The third publication presents the identification of a new peptide library, named photohexapeptide library, which occurred after the biosynthetic gene phpS was activated in P. asymbiotica PB68.1 via promoter exchange. The chemical diversity of the photohexapeptides results from unusual promiscuous specificity of five out of six adenylation (A) domains being an excellent example of how to create compound libraries in nature. Furthermore, photohexapeptides enrich the family of the rare linear D-/L-peptide NPs.
The fourth publication concentrates on the structure elucidation of a new cyclohexapeptide, termed photoditritide, which was produced by P. temperata Meg1 after the biosynthetic gene pdtS was activated via promoter exchange. Photoditritide so far is the only example of a peptide from entomopathogenic bacteria that contains the uncommon amino acid homoarginine. The potent antimicrobial activity of photoditritide against Micrococcus luteus implies that photoditritide can protect the insect cadaver from food competitor bacteria in the complex life cycle of nematode and bacteria.
The last publication reports a new family of cyclic lipopeptides (CLPs), named phototemtides, which were obtained after the BGC pttABC from P. temperata Meg1 was heterologously expressed in E. coli. The gene pttA encodes an MbtH protein that was required for the biosynthesis of phototemtides in E. coli. To determine the absolute configurations of the hydroxy fatty acids, a total synthesis of the major compound phototemtide A was performed. Although the antimalarial activity of phototemtide A is only weak, it might be a starting point towards a selective P. falciparum compound, as it shows no activity against any other tested organisms.
Um molekulare Mechanismen in biologischen Prozessen zu verstehen, ist es unerlässlich biologisch aktive Verbindungen zu kontrollieren. Dabei spielt besonders die Aktivierung bzw. Desaktivierung von Genabschnitten eine zentrale Rolle in der gegenwärtigen chemischen, biologischen und medizinischen Forschung. Nukleinsäuren sind dabei offenkundige Zielmoleküle, da sie die Genexpression auf unterster Ebene regulieren und auf vielfältige Art und Weise an biologischen Prozessen beteiligt sind. Um solch eine genaue Steuerung zu erreichen, werden Nukleinsäuren häufig photolabil modifiziert und unter die Kontrolle von Licht gebracht. Da hochentwickelte Technologien es erlauben Photonen bestimmter Energie unter präziser räumlicher und zeitlicher Auflösung zu dosieren, ist Licht als nicht invasives Triggersignal ein besonders geeignetes Werkzeug um molekulare Prozesse zu kontrollieren.
Die Verwendung photolabiler Schutzgruppen („cage“) ermöglicht es, diese lichtaktivierbaren Nukleinsäuren („caged compound“) herzustellen. Üblicherweise werden Oligonukleotide damit an funktionsbestimmenden Stellen versehen, woraufhin die Funktion der Oligonukleotide unterdrückt wird. Die biologische Aktivität kann durch Bestrahlung mit Licht wieder hergestellt werden, da die photolabile Schutzgruppe durch den Lichtimpuls abgespalten wird. Neben der zeitweiligen Maskierung der Nukleinsäureaktivität existiert auch eine Methode, die als „photoaktivierbarer Strangbruch“ (‘‘caged strand break‘‘) bezeichnet wird. Dabei werden mit Hilfe von photolabilen Linkern (‘‘Verknüpfer‘‘) lichtinduzierte Strangbrüche in Oligonukleotiden ausgelöst, um so beispielsweise die Struktur eines Nukleinsäurestrangs zu zerstören. Die Idee der photoaktivierbaren Strangbrüche ist nicht neu, dennoch werden photolabile Schutzgruppen überwiegend nach der erstgenannten Strategie verwendet. Im Rahmen dieses Promotionsvorhabens wurden neue photosensitive Linkerbausteine für Oligonukleotide entwickelt und hergestellt, welche sich vor allem im Hinblick auf die Anwendbarkeit in lebenden biologischen Systemen von den bisherigen photolabilen Linkern unterscheiden.
Im ersten Projekt wurde ein nicht-nukleosidischer, photolabiler Linker, basierend auf dem Cumaringrundgerüst, entwickelt. Das Ziel war hier, vor allem, einen zweiphotonenaktiven Linker für biologische Anwendungen und Zweiphotonen-Fragestellungen nutzbar zu machen. Bisherige Zweiphotonen-Linker konnten hauptsächlich nur für Proteinverknüpfungen bzw. Neurotransmitter verwendet werden oder mussten chemisch umständlich (z.B. Click-Chemie) und postsynthetisch in Oligonukleotide eingeführt werden. Der neu entwickelte Zweiphotonen-Linker wurde als Phosphoramiditbaustein für die Oligonukelotid-Festphasensynthese synthetisiert, was einen problemlosen und automatisierten Einbau garantiert. Mit einem modifizierten Oligonukleotid konnten die photochemischen Eigenschaften des Linkers bestimmt und mit Hilfe eines fluoreszenzbasierten Verdrängungsassays und Lasertechniken der Zweiphotonen-Effekt visualisiert werden. Dazu wurde ein Hairpin-DNA-Strang hergestellt, welcher eine Linkermodifikation im Bereich der Loopregion enthält. Durch eine Thiolmodifikation am 5‘-Ende des Oligonukleotidstranges war es möglich, diesen in einem Maleimid-funktionalisierten Hydrogel zu fixieren. Ein DNA-Duplex mit einem Fluorophor/Quencherpaar und einer korrespondierenden Sequenz zum modifizierten Hairpin-Strang wurde ebenfalls dem System zugegeben, allerdings wurde dieser nicht fixiert, um Diffusion zu ermöglichen. Durch die räumliche Nähe des Fluorophors zum Quencher konnte im unbelichteten Zustand zunächst keine Fluoreszenz gemessen werden. Mit einem (Femtosekunden-)gepulsten Laser und dem damit verbundenen Bindungsbruch im Hairpin-Strang durch Zweiphotonen-Effekte wurde es dem fluoreszierenden Strang des DNA-Duplex ermöglicht, sich vom Quencher-Strang zu lösen und an den fixierten Strang zu hybridisieren. Das Photolyse-Ereignis konnte so in ein lokales Fluoreszenzsignal übersetzt und detektiert werden.
Der eindeutige Beweis, dass es sich tatsächlich um ein Zweiphotonen-induziertes Ereignis handelt, konnte durch die dreidimensional aufgelöste Photolyse und über die quadratische Anhängigkeit des Fluoreszenzsignals von der eingestrahlten Laserleistung erbracht werden.
Die generelle Kompatibilität des Cumarin-Linkers mit biologischen Systemen konnte in Zellkulturexperimenten gezeigt werden. Dazu wurde eine Transkriptionsfaktor-DNA Decoy-Strategie entwickelt, in der Linker-modifizierte DNA Decoys an regulatorische Transkriptionsfaktoren binden und diese aber auch photochemisch wieder freisetzen können („catch and release-Strategie“). Zellkulturexperimente, um mit dieser Methode das Transkriptionsfaktor-gesteuerte und endogene Gen für Cyclooxygenase-2 (COX2) zu regulieren, lieferten keine aussagekräftigen Ergebnisse. Daher wurden die verwendeten Zellen dahingehend manipuliert, sodass sie das Protein GFP (grün fluoreszierendes Protein) in Abhängigkeit von der Anwesenheit eines Transkriptionsfaktors exprimieren. Das so durch die Zellen verursachte Fluoreszenzsignal steht in direkter Abhängigkeit zur Decoy-Aktivität. Mit Hilfe modifizierter GFP-Decoys konnte hierbei eine Regulation auf Transkriptionsebene in biologischen Organismen erreicht werden. Mit dem Electrophoretic Mobility Shift Assay (EMSA), einer molekularbiologischen in vitro-Analysetechnik, wurden die Interaktionen zwischen modifizierten Decoys und dem Transkriptionsfaktor untersucht.
...
This work comprises the investigation of four different biosynthesis gene clusters from Xenorhabdus. Xenorhabdus is an entomopathogenic bacterium that lives in mutualistic symbiosis with its Steinernema nematode host and together they infect and kill insect larvae. Xenorhabdus is well known for the production of so-called specialised metabolites and many of these compounds are synthesised by non-ribosomal peptide synthetases (NRPSs) or NRPS-polyketide synthase (PKS)-hybrids. These enzymes are organised in a modular manner and produce structurally very diverse molecules, often with the help of modifying domains and tailoring enzymes. In general, the genes involved in the biosynthesis are organised in so-called biosynthetic gene clusters (BGCs) in the genome of the producing strain. Exchanging the native promoter with an inducible promoter, e.g. PBAD, allows the targeted activation of the BGC and in turn the analysis of the biosynthesis product via LC-MS analysis.
The first BGC investigated in this work is responsible for the biosynthesis of xenofuranones. Based on gene deletions, this work shows that the NRPS-like enzyme XfsA produces a carboxylated furanone intermediate which is subsequently decarboxylated by XfsB to yield xenofuranone B. The next step in xenofuranone biosynthesis is the O-methylation of xenofuranone B to yield xenofuranone A. A comparative proteomics approach allowed the identification of four methyltransferase candidates and subsequent gene deletions confirmed one of the candidates to be responsible for methylation of xenofuranone B. The proteome analysis was based on the comparison of X. szentirmaii WT and X. szentirmaii Δhfq because distinct levels of the methylated xenofuranone A were observed when the xfs BGC was activated in either WT or Δhfq strain. Hfq is a global transcriptional regulator whose deletion is associated with the down regulation of natural product biosynthesis in Xenorhabdus. The strong PBAD activation of the xfs BGC also allowed the detection of two novel xenofuranone derivatives which arise from incorporation of one 4-hydroxyphenylpyruvic acid as first or second building block, respectively.
PBAD based activation of the second BGC addressed in this work lead to the detection of a novel metabolite and compound purification allowed NMR-based structure elucidation. The molecule exhibits two pyrrolizidine moieties and was named pyrrolizwilline (pyrrolizidine + twin (German: “Zwilling”)). The BGC comprises seven genes and single gene deletions as well as heterologous expression in E. coli and NRPS engineering were conducted to investigate the biosynthesis. The first two genes xhpA and xhpB encode a bimodular NRPS and a monooxygenase which synthesise a pyrrolizixenamide-like structure, similar to PxaA and PxaB in pyrrolizixenamide biosynthesis. It is suggested that the acyl side chain incorporated by XhpA is removed by the α,β-hydrolase XhpG. The keto function is then reduced by two subsequent two electron reductions catalysed by XhpC and XhpD. One of these two reduced pyrrolizidine units most likely is extended with glyoxalate prior to non-enzymatic dimerisation with the second pyrrolizidine moiety. To finally yield pyrrolizwilline, L-valine is incorporated, probably by the free-standing condensation domain XhpF.
The third BGC investigated is responsible for the production of a tripeptide composed of β-D-homoserine, α-hydroxyglycine and L-valine and is referred to as glyoxpeptide. This work demonstrates that the previously observed glyoxpeptide derivative is derived from glycerol present in the culture medium. Furthermore, this work shows that the monooxygenase domain, which is found in an unusual position between motifs A8 and A9 within the adenylation domain, is responsible for the α-hydroxylation of glycine. It is suggested that the α-hydroxylation of glycine renders the tripeptide prone to hydrolysis via hemiacetal formation. Hence, the XgsC_MonoOx domain might be an interesting candidate for further NRPS engineering.
The fourth BGC addressed is responsible for the production of xildivalines and this work describes two additional derivatives which are detected only when the promoter is exchanged and activated in the X. hominickii WT strain but not in X. hominickii Δhfq. Deletion of the methyltransferase encoding gene xisE results in the production of non-methylated xildivalines. It remains to be determined when the N-methylation of L-valine takes place. It is discussed that the methyltransferase could act on the NRPS released product but also during the assembly. The peptide deformylase is not involved in the proposed biosynthesis as xildivaline production is detected in a ΔxisD strain. The PKS XisB features two adjacent, so-called tandem T domains. The inactivation of the first or the second T domain by point mutation causes decreased production titres of detected xildivalines in the respective mutant strain when compared to the wild type.
This cumulative dissertation examines learning in chemistry laboratories, focusing on the challenges and benefits of problem-based learning (PBL) for novices in the lab. It addresses the lack of consistent understanding about what should be learned in labs and why it's important. The research aims to understand what students learn, how they learn, and how lab learning can be improved.
A central concept in PBL labs is Information Literacy, defined as a sociocultural practice enabling learners to identify and use information sources within a specific context as legitimized by the practice community.
The first publication, Wellhöfer and Lühken (2022a), investigates the relationship between PBL and learner motivation. It identifies factors that can foster students' intrinsic motivation in a PBL lab. Autonomy is found to be a key factor, increasing student motivation and presenting a model of the autonomous scientific process. This model involves four steps: information acquisition, designing and applying experimental procedures, experimental feedback, and autonomous process optimization. The results suggest that intrinsic motivation in PBL labs can be enhanced by enabling students to independently execute these steps.
The second publication, Wellhöfer and Lühken (2022b), examines the information process students undergo during their first PBL lab. Using a sociocultural framework, it explores Information Literacy to understand students' handling of information and their perceptions of the information process. The findings reveal that in PBL labs, developing a practical, applicable experimental procedure is crucial for problem-solving and significantly shapes the information-acquisition process. This process is iterative, influenced by new information, leading to more precise information needs. Students assess information quality based on its usefulness for their problem, implementability (considering cognitive understanding, available equipment, and psychomotor skills), and safety.
Furthermore, the role of privileged knowledge forms in evaluating the quality of text sources is explored. Students viewed non-scientific sources as "poor" and scientific sources as "good," yet used both for information gathering. There were discrepancies between their assessment of source quality and actual use, indicating that perception of source quality doesn't always affect their practical decisions.
The third publication, Wellhöfer, Machleid, and Lühken (2023), investigates students' information practices in the lab, focusing on discourse between novice learners and experienced assistants. It shows that theoretical knowledge isn't sufficient for independent practical action, and students need actionable social information from experienced community members. The results highlight that information literacy in the lab for newcomers to a community of practice has distinctive features, and physical experience and tacit knowledge are crucial for learning the methods and group-specific knowledge of the practice community. The article demonstrates how learning information literacy in a practice community requires a social and physical experience and provides insights on how educators can support this process.
Non-ribosomal peptide synthetase docking domains : structure, function and engineering strategies
(2021)
Non-ribosomal peptide synthetases (NRPSs) are known for their capability to produce a wide range of natural compounds and some of them possess interesting bioactivities relevant for clinical application like antibiotics, anticancer, and immunosuppressive drugs. The diverse bioactivity of non-ribosomal peptides (NRPs) originates from their structural diversity, which results not only from the incorporation of non-proteinogenic amino acids into the growing peptide chain, but also the formation of heterocycles or further peptide modifications like methylation, hydroxylation and acetylation.
The biosynthesis of NRPs is achieved via the orchestrated interplay of distinct catalytic domains, which are grouped to modules that are located on one or more polypeptide chains. Each cycle starts with the selection and activation of a specific amino acid by the adenylation (A) domain, which catalyzes the aminoacyl adenylate formation under ATP consumption. This activated amino acid is then bound via a thioester bond to the 4’-phosphopantetheine cofactor (PPant-arm) of the following thiolation (T) domain. Before substrate loading, the PPant-arm is post-translationally added to the T domain by a phosphopantetheinyl transferase (PPTase), which converts the inactive apo-T domain in its active holo-form. In the last step of the catalytic cycle, two T domain bound peptide building blocks are connected by the condensation (C) domain, resulting in peptide bond formation and transfer of the nascent peptide chain to the following module. Each catalytic cycle is performed by a C-A-T elongation module until the termination module with a C-terminal thioesterase (TE) domain is reached. Here, the peptide product is released by hydrolysis or intramolecular cyclisation.
In comparison to single-protein NRPSs, where all modules are encoded on a single polypeptide chain, multi-protein NRPS systems must also maintain a specific module order during the peptide biosynthesis. Therefore, small C-terminal and N-terminal communication-mediating (COM) domains/docking domains (DD) were identified in the C- and N-terminal regions of multi-protein NRPSs. It was shown that these domains mediate specific and selective non-covalent protein-protein interaction, even though DD interactions are generally characterized by low affinities.
The first publication of this work focuses on the Peptide-Antimicrobial-Xenorhabdus peptide-producing NRPS called PaxS, which consists of the three proteins PaxA, PaxB and PaxC. Here, in particular the trans DD interface between the C-terminal attached DD of PaxB and N-terminal attached DD of PaxC was structurally investigated and thermodynamically characterized by isothermal titration calorimetry (ITC), yielding a dissociation constant (KD) of ~25 µM, which is a DD typical affinity known from further characterized DD pairs. The artificial linking of the PaxB/C C/NDD pair via a glycine-serine (GS) linker facilitated the structure determination of the DD complex by solution nuclear magnetic resonance (NMR) spectroscopy. In comparison to known docking domain structures, this DD complex assembles in a completely new fold which is characterized by a central α-helix of PaxC NDD wrapped in two V-shaped α-helices of PaxB CDD.
The first manuscript of this work focuses on the application of synthetic zippers (SZ) to mimic natural docking domains, enabling the easy assembly of NRPS building blocks encoded on different plasmids in a functional way. Here, the high-affinity interaction of SZs unambiguously defines the order of the synthetases derived from single-protein NRPSs in the engineered NRPS system and allows the recombination in a plug-and-play manner. Notably, the SZ engineering strategy even facilitates the functional assembly of NRPSs derived from Gram-positive and Gram-negative bacteria. Furthermore, the functional incorporation of SZs into NRPS modules is not limited to a specific linker region, so we could introduce them within all native NRPS linker regions (A-T, T-C, C-A).
The second publication and the second manuscript of this thesis again focus on the multi-protein PaxS, in particular on the trans interface between the proteins PaxA and PaxB on a molecular level by solution NMR. Therefore, the PaxA CDD adjacent T domain was included into the structural investigation besides the native interaction partner PaxB NDD. Before a three-dimensional structure could be obtained from NMR data, the NH groups located in the peptide bonds had to be assigned to the respective amino acids of the proteins (backbone assignment). Based on these backbone assignments, the secondary structure of PaxA T1-CDD and PaxB NDD in the absence and presence of the respective interaction partner were predicted.
The structural and functional characterization of the PaxA T1-CDD:PaxB NDD complex is summarized in manuscript two. The thermodynamic analysis of this complex by ITC determined a KD value of ~250 nM, whereas the discrete DDs did not interact at all. The high-affinity interaction allowed to determine the solution NMR structure of the PaxA T1-CDD:PaxB NDD complex without the covalent linkage of the interaction partners and an extended docking domain interface could be determined. This interface comprises on the one hand α-helix 4 of the PaxA T1 domain together with the α-helical CDD, and on the other hand the PaxB NDD, which is composed of two α-helices separated by a sharp bend.
...
Polyketides are highly valuable natural products, which are widely used as pharmaceuticals due to their beneficial characteristics, comprising antibacterial, antifungal, immunosuppressive, and antitumor properties, among others. Their biosynthesis is performed by large and complex multiproteins, the polyketide synthases (PKSs). This study solely focuses on the class of type I PKSs, which arrange all their enzymatic domains on one or more polypeptides. Despite their high medical value, little is known about mechanistic details in PKSs.
One central domain is the acyl transferase (AT), which is present in all PKSs and channels small acyl substrates into the enzyme. More precisely, the AT loads the substrates onto the essential acyl carrier protein (ACP), which subsequently shuttles the substrates and all intermediates for condensation and modification to additional domains to build the final polyketide.
Some PKSs use their domains several times during biosynthesis and work iteratively – these are called iterative PKSs. Others feature several sets of domains, each being used only once during biosynthesis – these PKSs are called modular PKSs. All PKSs or PKS modules consist of minimum three essential domains to connect the acyl substrates. Three modifying domains are optional and can enlarge the minimal set. According to the domain composition, the acyl substrate is fully reduced, partly reduced, or not reduced at all. This variation of modifying domains accounts for the huge structural and therefore functional variety of polyketides.
Even though the structure of fatty acids is not exactly reminiscent of polyketides, their biosynthetic pathways are closely related. Fatty acid biosynthesis is carried out by fatty acid synthases (FASs), which share many similarities with PKSs. Both megasynthases feature the same domains, performing the same reactions to connect and modify small acyl substrates. In contrast to PKSs, FASs always contain one full set of modifying domains which is used iteratively, leading to fully reduced fatty acids.
The present thesis extensively analyzes the AT of different PKSs in its substrate selectivity, AT-ACP domain-domain interaction, and enzymatic kinetic properties. The following key findings are revealed through comparison: 1.) ATs of PKSs appear slower than the ones of FASs, which may reflect the different scopes of biosynthetic pathways. Fatty acids as essential compounds in all organisms are needed in high amounts for physiological functions, whereas polyketides as secondary metabolites only require basal concentrations to take effect. 2.) The slower ATs from modular PKSs do not load non-native substrates even in absence of the native substrates. This is different to the faster ATs from iterative PKSs and FASs, which indicates high substrate specificity solely for the ATs from modular PKSs and emphasizes their role as gatekeepers in polyketide synthesis. 3.) The substrate selectivity can emerge in either the first or the second step of the AT-mediated ACP loading and is not assured by a hydrolytic proofreading function.
Moreover, a mutational study on the AT-ACP interaction in the modular PKS 6-deoxyerythronolide B synthase (DEBS) shows that single surface point mutations can influence AT-mediated reactions in a complex manner. Data reveals high enzyme kinetic plasticity of the AT-ACP interaction, which was also recently demonstrated for the interaction in a type II FAS.
Based on these findings, the mammalian FAS is engineered towards a modular PKS-like as- sembly line with the long-term goal to rationally synthesize new products. Basically, three important aspects need to be considered: 1.) AT’s loading needs to be splitted in specific loading of a priming substrate by a priming AT and in specific loading of an elongation substrate by an elongation AT. 2.) FAS-based elongation modules need to be designed with varying domain compositions for introducing functional groups in the product. 3.) Covalent and non-covalent linkers need to be designed for connection of priming and elongation modules.
This study focuses on the first aspect, splitting loading of priming and elongation substrates. An elongation substrate-specific AT is installed in the mammalian FAS via domain swapping. Since ATs from modular PKSs were proven to be substrate specific, these are used to exchange the mammalian FAS AT. This work demonstrates that it is extremely challenging to create stable and functional chimeras, but first essential steps are taken. Proper domain boundaries for AT swapping are established and a stable chimera with 70 % wild type AT activity is created. However, this chimera is only of limited value for application in an elongation module due to the intrinsic slow turnover rate of the wild type AT. Using another PKS AT, a stable elongation module is designed and analyzed in its activity in combination with a priming module. These experiments demonstrate that the loading of priming substrates are successfully suppressed in the elongation module, but nonetheless only minor turnover rates are detected in the assembly line.
...
Ziel dieser Arbeit war es zum einen Informationen über den Mechanismus in Dodecinproteinen zu gewinnen, der zu der effizienten Fluoreszenzlöschung von gebundenem Riboflavin und einer deutlichen Verlängerung der Lebendsdauer des Chromophors unter Lichteinwirkung führt. Zum anderen sollte mit Hilfe eines kurzen Modellpeptids, das eine Azobenzoleinheit als Photoschalter in seinem Peptidrückgrat enthielt, erste Schritte der Peptidfaltung untersucht werden.
Die Untersuchungen an Dodecinproteinen konzentrierten sich hauptsächlich auf archaeales Dodecin aus Halobacterium salinarum (HsDod). Eine Besonderheit der Dodecinproteine ist, dass sie im Gegensatz zu anderen Flavinbindeproteinen zwei Flavinmoleküle in jeder ihrer sechs identischen Bindetaschen einbauen können. Kurzzeitspektroskopische Untersuchungen im UV/vis-Spektralbereich zeigen, dass nach Photoanregung eines gebundenen Riboflavinmoleküls nach etwa 10 ps der Ausgangszustand wieder erreicht wird. Weiterhin zeigt das Fehlen der stimulierten Emission in den transienten Daten, dass bereits innerhalb der Zeitauflösung des Experiments, in weniger als 150 fs, der erste angeregte Zustand des Riboflavins entvölkert wird. Dies verhindert unerwünschte Reaktionen des Riboflavins und stellt eine Versorgung der Zelle mit diesem wichtigen Baustein für die Biosynthese von FMN und FAD sicher. Die Ergebnisse zeigen außerdem, dass zwei Spezies mit unterschiedlichen spektralen Signaturen und Lebensdauern an dem Löschungsmechanismus und der Wiedererlangung des Ausgangszustands beteiligt sind. Der Vergleich von HsDod-Proteinen in nicht-deuteriertem und deuteriertem Lösungsmittel sowie die spektrale Signatur der Spezies, die mit einer Zeitkonstante von etwa 800 fs zerfällt deuten an, dass ein Elektronen- sowie ein Protonentransfer Teil des Mechanismus sind. Mit Hilfe von HsDod-Proteinen, bei denen der Asparaginsäurerest unterhalb der Bindetasche, der für das Binden eines wasserkoordinierten Magnesiumions verantwortlich ist, gegen Serin (D41S) oder Glutaminsäure (D41E) ausgetauscht war, konnte gezeigt werden, dass das wasserkoordinierte Magnesiumion nicht relevant für den Löschungsmechanismus ist. Dennoch konnte eine Beteiligung von Wassermolekülen nicht ausgeschlossen werden. Die Beteiligung eines Elektronentransfers von einem Tryptophanrest in der Bindetasche auf das photoangeregte Flavin konnte durch Messungen an Dodecinproteinen mit Tryptophan-Derivaten mit unterschiedlichen Ionisationsenergien bestätigt werden.
Die Spezies, die mit einer Zeitkonstante von etwa 5 ps zerfällt, die ebenfalls zu einer Wiederbesetzung des Ausgangszustands führt, konnte nicht eindeutig identifiziert werden. Die spektrale Signatur des zerfallassoziierten Spektrums könnte neben einer neutralen Tryptophanspezies und einem kationischen Riboflavinradikal auch durch schwingungsangeregte Riboflavinmoleküle verursacht werden.
Eine Beteiligung der Ribitylkette am Mechanismus kann aufgrund der Ergebnisse von HsDod-gebundenem Lumiflavin ausgeschlossen werden. Weiterhin konnte anhand der Ergebnisse für HsDod-gebundenes FAD, das in seiner geschlossenen Konformation gebunden wird, wobei der Adeninrest die zweite Position in der Bindetasche besetzt, eine Beteiligung des zweiten Flavins in der Bindetasche am Löschungsmechanismus sowie ein Beitrag zu den Differenzspektren ausgeschlossen werden. Somit dient die Besetzung einer Bindetasche mit zwei Flavinmolekülen vermutlich lediglich der Maximierung der Flavinbeladung. Nicht eindeutig geklärt werden konnte die Frage, ob es sich um einen sequentiellen oder parallelen Mechanismus handelt.
Neben archaealem wurde auch bakterielles Dodecin mittels transienter UV/vis-Spektroskopie untersucht. Für Dodecin aus Halorhodospira halophila (HhDod) konnte ebenfalls eine sehr schnelle Wiedererlangung des Ausgangszustands nach Photoanregung des gebundenen Riboflavins beobachtet werden. Allerdings spiegeln einige Unterschiede in den transienten Daten die Unterschiede in den Bindetaschen von archaealem und bakteriellem Dodecin wider und geben Hinweise darauf, dass die Funktionen in der Zelle für die Dodecine unterschiedlich sind. Diese Hypothese wird durch verschiedene Cofaktoren, Riboflavin und Lumichrom für HsDod und FMN für HhDod, in vivo unterstützt. Die ermittelten Zeitkonstanten sind für das bakterielle Dodecin etwas länger als für das archaeale und die transienten Daten weisen in den spektralen Signaturen der Differenzsignale sowohl Unterschiede als auch Gemeinsamkeiten auf.
Im zweiten Teil dieser Arbeit wurden erste Schritte der Peptidfaltung mit Hilfe eines wasserlöslichen bizyklischen Modellpeptids, das den Photoschalter 4(4’-Aminomethylphenylazo)benzoesäure (AMPB) enthält, untersucht. Hierfür wurden Kurzzeitspektroskopische Messungen im mittleren infraroten Spektralbereich für den Schaltvorgang von der cis-Form des Azopeptids in die trans-Form durchgeführt. Diese Methode erlaubt es, transiente Konformationsänderungen des Peptidrückgrats zu verfolgen. In der cis-Form kann das Peptid mehrere unterschiedliche Konformationen einnehmen, während der Konformationsraum für die trans-Form deutlich eingeschränkt ist. Nach der Photoanregung im Bereich der n-pi*-Bande der Azobenzoleinheit finden die grundlegenden konformationellen Änderungen innerhalb der ersten 10-20 ps statt. Dies wurde durch polarisationsabhängige Messungen bestätigt.
Auf dieser Zeitskala finden die größten Änderungen in den transienten Differenzspektren statt, die auf Konformationsänderungen sowie Kühlprozesse zurückzuführen sind. Diese Prozesse konnten mit einer Zeitkonstanten von 5 ps zusammengefasst werden. Auf längeren Zeitskalen finden weitere Reorganisationsprozesse statt, die mit einer Zeitkonstante von 300 ps zusammengefasst werden können. Bei maximaler Verzögerungszeit des Experiments (1,8 ns) ist der Gleichgewichtszustand noch nicht erreicht und es finden weitere Prozesse auf längeren Zeitskalen statt. Im Vergleich zu einem ähnlichen bereits untersuchten DMSOlöslichen bizyklischen AMPB-Peptid konnte keine schnellere Dynamik durch den Einsatz von Wasser als Lösemittel festgestellt werden, wie es vorangegangene transiente Experimente im UV/vis-Spektralbereich an wasser- und DMSO-löslichen bizyklischen Azopeptiden angedeutet hatten. Die Ergebnisse der transienten Messungen zeigen gute Übereinstimmungen mit molekulardynamischen Rechnungen. Das so gewonnene Modell von den Prozessen nach der Isomerisierung des Photoschalters erlaubt Einblicke in erste Schritte bei der Faltung von Peptiden in ihrem natürlichen Lösungsmittel Wasser und die Zeitskalen der entsprechenden Prozesse.
Bacteria are highly organized organisms which are able to adapt to and propagate under a multitude of environmental conditions. Propagation hereby requires reliable chromosome replication and segregation which has to occur cooperatively with other cellular processes such as transcription, translation or signaling. Several mechanisms were proposed for segregation of the Escherichia coli (E. coli) chromosome, for example a mitotic-like active segregation model or entropy-based passive chromosome segregation. Another segregation model suggests coupled transcription, translation and insertion of membrane proteins (termed "transertion"), which links the replicating chromosome (nucleoid) to the growing cell cylinder.
Fluorescence microscopy was widely used to provide evidence for a distinct segregation model. However, the dynamic nature of bacterial chromosomes, the small bacterial size and the optical resolution limit of ~ 200-300 nm impair unveiling the underlying mechanisms. With the emergence of super-resolution fluorescence microscopy techniques and advanced labeling methods, a new toolbox became available enabling scientists to visualize biomolecules and cellular processes in unprecedented detail. Single-molecule localization microscopy (SMLM) represents a set of super-resolution microscopy techniques which relies on the temporal separation of the fluorescence signal and detection of single fluorophores. Separation can be achieved using photoactivatable or -convertible fluorescent proteins (FPs) in photoactivated localization microscopy (PALM), photoswitchable organic dyes in direct stochastic optical reconstruction microscopy (dSTORM) or dynamically binding fluorescent probes in point accumulation for imaging in nanoscale topography (PAINT). In all these techniques, the fluorescence emission pattern of single fluorophores is spatially localized with nanometer-precision. An artificial image is finally reconstructed from the coordinates of all single fluorophores detected. This provides a spatial resolution of ~ 20 nm, which is perfectly suited to investigate cellular processes in bacteria. In this thesis, different SMLM techniques were applied to study fundamental processes in E. coli. This includes determination of protein copy numbers and distributions as well as the nanoscale organization of nucleic acids and lipids.
A novel labeling approach was applied and used for super-resolution imaging of the E. coli nucleoid. It is based on the incorporation of the modified thymidine analogue 5-ethynyl-2’- deoxyuridine (EdU) into the replicating chromosome. Azide-functionalized organic fluorophores can be covalently attached to the ethynyl group of incorporated EdU bases using a copper-catalyzed "click chemistry" reaction. Under the investigated growth condition, E. coli cells exhibited overlapping replication cycles, which is commonly referred to as multi-fork replication and enables cells to divide faster than they can replicate the entire chromosome. dSTORM imaging of such labeled nucleoids revealed chromosome features with diameters of 50 - 200 nm, representing highly condensed DNA filaments. Sorting single E. coli cells by length allowed visualizing structural changes of the nucleoid throughout the cell cycle. Replicating nucleoids segregated and expanded along the bacterial long axis, while constantly covering the entire width of the cell. Measuring cell and nucleoid length revealed a relative nucleoid expansion rate of 78 ± 6 %. At the same time, nucleoids populated 63 ± 8 % of the cell length, almost exclusively being localized to the cylindrical part of the cell. This value was hence normalized to the cylindrical fraction of the cell, yielding a value of 79 ± 10 % (nucleoid-populated fraction of the cell cylinder), which is in good agreement with the observed relative nucleoid expansion rate. These results therefore support a growth-mediated segregation model, in which the chromosome is anchored to the inner membrane and passively segregated into the prospective daughter cells upon cell growth. 3-dimensional dSTORM imaging of labeled nucleoids confirmed that compacted nucleoids helically wrap along the inner membrane. Similar results were obtained by imaging orthogonally aligned E. coli cells using a holographic optical tweezer approach.
In order to visualize particular proteins together with the nucleoid, several correlative imaging workflows were established, facilitating multi-color SMLM imaging in single E. coli cells. These workflows bypass prior limitations of SMLM, including destruction of FPs by reactive oxygen species in copper-catalyzed click reactions or incompatibility of PALM imaging with dSTORM imaging buffers. A sequential SMLM imaging routine was developed which is based on postlabeling and retrieval of previously imaged cells. Optimal imaging conditions can be maintained for each fluorophore, enabling to extract quantitative information from PALM measurements while correlating the protein distribution to the nucleoid ultrastructure within the highly resolved cell envelope. Applying this workflow to an E. coli strain carrying a chromosomal rpoC - photoactivatable mCherry (PAmCh) fusion, transcribing RNA polymerase (RNAP) was found to be localized on the surface of nucleoids, where active genes are exposed towards the cytosol. During growth in nutrient-rich medium, the majority of RNAP molecules was bound to the chromosome, thus ensuring that the RNAP pool is equally distributed to the daughter cells upon cell division. This work represented the first triple-color SMLM study performed in E. coli cells. ...
Ziel dieser Doktorarbeit war es, die Bedeutung der Kristallstrukturbestimmung aus Pulverdaten (SDPD) herauszuarbeiten und etwaige Grenzen durch neue Methodenentwicklungen zu erweitern, insbesondere bei Analyse der Paarverteilungsfunktion (PDF).
Die Effizienz der SDPD konnte anhand der erfolgreich gelösten Kristallstruktur von Carmustin (1,3 Bis-2-chlorethyl-1-nitrosoharnstoff, C5H9Cl2N3O2) aufgezeigt werden. [CS01]
Die Grenzen der SDPD wurden ausgelotet und erfolgreich erweitert. Nach weit verbreiteter kristallographischer Meinung ist die Strukturlösung mittels des simulierten Temperns (simulated annealing, SA) bei mehr als 25 zu bestimmenden Parametern problematisch oder unmöglich. Die pharmazeutischen Salze Lamivudin-Camphersulfonat (LC) und Aminogluthethimid-Camphersulfonat (AC) konnten, trotz ihrer hohen Anzahl an Freiheitsgraden von 31 für LC bzw. 37 für AC erfolgreich bestimmt werden. Die Strukturlösung von AC war herausfordernd und nicht direkt bei Anwendung der SA-Methode möglich. Nach einer intensiven Fehleranalyse stellte sich heraus, dass nicht die Grenzen der SA-Methode ausschlaggebend für das anfängliche Scheitern der Strukturlösung waren, sondern falsch extrahierte Intensitäten des vorangegangenen Pawley-Fits. Nach Behebung dieser Fehlerquelle war die Strukturlösung von AC problemlos. [CS02]
Mittels SDPD kann die absolute Konfiguration chiraler Verbindungen nicht direkt bestimmt werden. Durch Kristallisation der zu bestimmenden chiralen Verbindung mit einem chiralen Gegenion bekannter Konformation in einer simplen Säure-Base-Reaktion zu einem diastereomeren Salz und nachfolgender SDPD konnte eine neue Methode entwickelt werden, um die Konfigurationsbestimmung aus Pulverdaten zu ermöglichen. Diese Methode wurde anhand der drei pharmazeutischen Salze (R)-Flurbiprofen-(R)-Chinin (FQ), (2R5S)-Lamivudin-(R)-Camphersulfonat (LC) und (R)-Aminogluthethimid-(R)-Camphersulfonat (AC) aufgezeigt: In allen drei Fällen konnte die korrekte Konfiguration des pharmazeutischen Wirkstoffes mit den hierfür entwickelten Kriterien erfolgreich bestimmt werden. [CS03, CS04]
Durch Kombination der klassischen SDPD mit neuen methodischen Ansätzen konnten die Kristallstrukturen der schlecht kristallinen organischen Pigmente 2-Monomethylchinacridon (MMC, C21H14N2O2) und 4,11-Difluorchinacridon (DFC, C20H10N2O2F2) bestimmt werden, obwohl aufgrund ihrer geringen Kristallqualität keine sinnvolle Indizierung möglich war.
Für die Kristallstrukturbestimmung von DFC lieferte der neu entwickelte Global-Fit des Programms FIDEL mögliche Strukturmodelle mit ähnlich guter Übereinstimmung an das experimentelle Pulverdiagramm. Die Rietveld-Verfeinerung der Strukturmodelle in Kombination mit der Anpassung der Kristallstruktur an die PDF-Daten und kraftfeldbasierter Gitterenergieminimierung konnte einen geeigneten Strukturrepräsentanten von DFC liefern. [CS05, CS06]
Im Fall von MMC war eine Kombination der Methoden von Rietveld-Verfeinerung, Verfeinerung an die PDF-Daten und Gitterenergieminimierung zielführend zur Bestimmung der Orientierungs-Fehlordnung von MMC im Kristall. MMC ist hierbei die erste organische Verbindung, deren Fehlordnung durch Anpassung an die PDF bestimmt werden konnte. [CS07]
Große Erfolge konnten bei der Methodenentwicklung der PDF-Analyse erzielt werden. Die Bestimmung von Kristallstruktur organischer Verbindungen durch Anpassung an die PDF ohne vorherige Kenntnis der Gitterparameter oder Raumgruppe wurde durch die Entwicklung des PDF-Global-Fits erreicht. Lediglich die PDF-Kurve und eine Molekülstruktur werden als Input benötigt. Die Strukturlösung beruht auf einem globalen Optimierungs-Ansatz, bei welchem in ausgewählten Raumgruppen Zufallsstrukturen erzeugt werden. Die Zufallsstrukturen werden mit den experi¬mentellen Daten verglichen und entsprechend ihres Ähnlichkeitsindexes, basierend auf der Kreuz-Korrelation, sortiert. [CS08, CS09] Die vielversprechendsten Kandidaten werden in einem einge¬schränkten simulierten annealing-Ansatz an die experimentelle PDF angepasst. Eine nachfolgende Strukturverfeinerung der besten Strukturmodelle liefert die korrekte Kristallstruktur. Der Erfolg des PDF-Global-Fits wurde am Beispiel der Barbitursäure aufgezeigt: Ausgehend von 300 000 Zufallsstrukturen konnte die korrekte Kristallstruktur von Barbitursäure bestimmt werden. Barbitursäure ist hierdurch die erste organische Verbindung, deren Lokalstruktur durch Anpassung an die PDF bestimmt wurde, ohne Input oder Vorgabe von Gitterparametern oder Raumgruppe.[CS10]
Mechanism of the MHC I chaperone TAPBPR and its role in promoting UGGT1-mediated quality control
(2022)
Information about the health status of most nucleated cells is provided through peptides presented on major histocompatibility complex I (pMHC I) on the cell surface. T cell receptors of CD8+ T cells constantly monitor these complexes and allow the immune system to detect and eliminate infected or cancerous cells. Antigenic peptides displayed on MHC I are typically derived from the cellular proteome and are translocated into the lumen of the endoplasmic reticulum (ER) by the ATP-binding cassette (ABC) transporter associated with antigen processing (TAP), which is part of the peptide-loading complex (PLC). In a process called peptide editing, the MHC I-dedicated chaperone tapasin (Tsn) selects peptides for their ability to form stable complexes with MHC I. While initial peptide loading is catalyzed in the confines of the PLC, the second quality control is mediated by TAPBPR, operating in the peptide-depleted cis-Golgi network. TAPBPR was shown to have a more fine-tuning effect on the presented peptide repertoire rather than initial peptide selection. The fundamental mechanism of peptide editing was illuminated by two crystal structures of TAPBPR in complex with peptide-receptive MHC I. Notably, one of these structures reported a structural element that inserted into the peptidebinding pocket. The so-called scoop loop was assumed to be involved in mediating peptide exchange but the underlying mechanism remained undefined. Additionally, latest results suggested that TAPBPR mediates the interaction of the glucosyltransferase UGGT1 with peptide-receptive MHC. To expand the current knowledge of quality control processes in the antigen presentation pathway, the contribution of the scoop loop in peptide editing and the role of TAPBPR in UGGT1-mediated quality control needs to be elucidated. In the first part of this study, TAPBPR proteins with various loop lengths were designed to scrutinize the contribution of the scoop loop in chaperoning peptidereceptive MHC I. In a light-driven approach, the ability of TAPBPR variants to form stable complexes with peptide-free MHC I was tested. These results demonstrated that in a peptide-depleted environment, the scoop loop is of critical importance for TAPBPR to chaperone intrinsically unstable, peptidereceptive MHC I clients. Moreover, fluorescence polarization-based assays allowed the pursuit of peptide exchange in different, native-like environments. Peptide displacement activities of TAPBPR variants illustrated that catalyzed peptide editing is primarily induced by structural elements outside the scoop loop. In a peptide-depleted environment, the scoop loop occupies the position of the peptide C-terminus and acts as an internal peptide surrogate. By combining complex formation and fluorescence polarization experiments, the scoop loop of TAPBPR was shown to be critically important in stabilizing empty MHC I and functions as an internal peptide selector. In the second part of this study, a novel in-vitro glucosylation assay was established to examine the role of TAPBPR in UGGT1-catalyzed re-glucosylation of TAPBPR-bound MHC I clients. Therefore, a peptide-free MHC I-TAPBPR complex with defined glycan species was designed which served as physiological substrate for UGGT1. By subjecting the recombinantly expressed HLA-A*68:02- TAPBPR complex and UGGT1 proteins to the new in-vitro system, UGGT1 was shown to catalyze the transfer of a glucose residue to the N-linked glycan of TAPBPR-bound Man9GlcNAc2-HLA-A*68:02. Moreover, a high-affinity, photocleavable peptide was applied to dissociate the MHC I-chaperone complex. However, in the absence of TAPBPR, no glucosyltransferase activity was observed. Generation of peptide-free MHC I through UV illumination also showed no activity, and only the addition of TAPBPR could restore UGGT1-mediated reglucosylation of the empty MHC I. Independent of the peptide status of HLAA*68:02, the combination of protein glycoengineering and LC-MS analysis implicated that UGGT1 exclusively acts on TAPBPR-chaperoned HLA-A*68:02. The newly established system provided insights into the function of TAPBPR during UGGT1-catalyzed re-glucosylation activity and quality control of MHC I. Taken together, the scoop loop allows TAPBPR to function as MHC I chaperone through stabilizing peptide-receptive MHC I. In a peptide-depleted environment, the loop structure serves as an internal peptide surrogate and can only be dislodged by a high-affinity peptide. Based on these findings, TAPBPR fulfills a dual function in the second level of quality control. On the one hand, TAPBPR functions as peptide editor, shaping the repertoire of presented peptides. On the other hand, TAPBPR mediates peptide-receptive MHC I clients to the folding sensor UGGT1. Here, TAPBPR is essential to promote UGGT1-catalyzed reglucosylation of the N-linked glycan, giving MHC I a second chance to be loaded with an optimal peptide cargo in the peptide loading complex.
Natural products are valuable sources for biologically active compounds, which can be utilized as pharmaceuticals. Thereby, the synthesis is based purely on biosynthetic grounds often conducted by so-called megaenzymes. One major biosynthetic pathway is the acetate pathway including polyketide and fatty acid synthesis, which encompass one of the largest classes of chemically diverse natural products. These have medicinal relevance due to their antibacterial, antifungal, anthelmintic, immunosuppressive and antitumor properties.
Due to the high structural and functional similarity between polyketide synthases and type I animal fatty acid synthases (FASs), FAS can serve as a paradigm for the whole class of multifunctional enzymes. To fully exploit the biosynthetic potential of FASs, a good access to the enzyme is of essential importance. In this regard, Escherichia coli remains an unchallenged heterologous host due to low culturing costs, particularly fast mutagenesis cycles and relatively easy handling. Surprisingly, no sufficient expression strategy for an animal FAS in E. coli has yet been reported, as it turned out that the only approach was not reproducible.
We commenced our analysis with searching for an appropriate FAS homolog that fulfills our requirements of high protein quality, sufficient yield and ensured functionality. After extensive screening of different variants, culturing conditions and co-expression strategies, we identified the murine FAS (mFAS) as our protein of choice. The established purification strategy using tags at both termini led to a reproducible and sufficient access to the protein in excellent quality. The enzyme was further biochemically characterized including an enzyme kinetic investigation of fatty acid synthesis and an examination whether different acyl-CoA substrates can serve as priming units. This adds mFAS to our repertoire of manageable megaenzymes paving the way to exploit the catalytic efficiency in regards of microbial custom-compound synthesis.
With a strong focus on deepening our understanding of the working mode of such megaenzymes, rather than analyzing respective biosynthetic products, we have addressed the question whether mFAS itself can be engineered towards PKSs or whether properties of mFAS can be exploited to engineer PKSs. This approach was conducted on three levels of complexity from function of individual domains via organization of domains to form modules to the interplay of two modules in bimodular constructs.
Fatty acid synthesis begins with the loading of acyl moieties onto the FAS, which is conducted by a domain called malonyl-/acetyltransferase (MAT). This domain was in-depth characterized due to its important role of choosing the substrates that are built in the final compound. Our analysis comprised structural and functional aspects providing crystal structures of two different acyl-bound states and kinetic parameters for the hydrolysis and transacylation reaction using twelve exemplary CoA-esters. For this purpose, we have successfully established a continuous fluorometric assay using the α-ketoglutarate dehydrogenase as a coupled enzyme, which converts the liberated coenzyme A into Nicotinamide adenine dinucleotide. These data revealed an extensive substrate ambiguity of the MAT domain, which had not been reported to that extent before. Further, we could demonstrate that the fold fulfills both criteria for the evolvability of an enzyme by expressing MAT in different structural arrangements (robustness) and by altering the substrate ambiguity within a mutagenesis study (plasticity). Taken these aspects together, we are persuaded that the MAT domain can serve as a versatile tool for PKSs engineering in potential FAS/PKS hybrid systems.
On the higher level of complexity, we investigated the architectural variability of the mFAS fold, which constitutes a fundamental basis for a broader biosynthetic application. We could rebuild all four module types occurring in typical modular PKSs confirming a high degree of modularity within the fold. Not only structural, but also functional integrity of these modules was validated by using triacetic acid lactone formation and ketoreductase activity. Especially the latter analysis, made it possible to quantify effects of the engineering within the processing part by respective enzyme kinetic parameters. Expanding our focus beyond a singular module, we have utilized the mFAS fold for designing up to 380 kDa large bimodular constructs. In this approach, a loading didomain was attached N-terminally containing an additional MAT and acyl carrier protein (ACP) domain. Two constructs could be expressed and purified in excellent quality to investigate the influence of an altered overall architecture on fatty acid synthesis. By comparison with appropriate controls, a functional effect of the additional loading module could indeed be proven in the bimodular systems. Those constructs allow a comprehensive analysis of the underlying molecular mechanism in the future and serve as a potential model system to study the transition from iterative to vectorial polyketide synthesis in vitro.
Die Paarverteilungsfunktion (PDF) beschreibt die Wahrscheinlichkeit, zwei Atome eines Materials in einem Abstand r voneinander zu finden. Diese Methode bewährt sich seit längerer Zeit zur Untersuchung von Gläsern, Flüssigkeiten, amorphen, stark fehlgeordneten und nanokristallinen anorganischen Substanzen. Die Anwendung für organische Substanzen ist jedoch relativ neu, mit etwa 20 Veröffentlichungen und Patenten insgesamt.
Im Rahmen dieser Dissertation wurden zwei Methoden zur Strukturverfeinerung und Strukturlösung organischer Substanzen anhand von PDF-Daten erfolgreich entwickelt und an diversen Beispielen validiert. Als erster Schritt hierzu wurde eine Methodenverbesserung vorgenommen. Hierbei handelte es sich um eine Verbesserung der Simulation der PDF-Kurven organischer Verbindungen anhand eines gegebenen Strukturmodells. Mit Hilfe der bisherigen Methoden können die PDF-Kurven anorganischer Substanzen erfolgreich simuliert werden. Für organische Substanzen werden bei Anwendung der bisherigen Methode die Signalbreiten der intramolekularen und intermolekularen Beiträge zu der PDF-Kurve falsch wiedergegeben, dies führt zu einer schlechten Anpassung der simulierten PDF-Daten and die experimentellen PDF-Daten. Deshalb wurde ein neuer Ansatz entwickelt, in welchem für die Berechnung der intramolekularen Beiträge zum PDF-Signal ein anderer isotroper Auslenkungsparameter verwendet wurde, als bei der Berechnung der intermolekularen Beiträge zum PDF-Signal. Mit diesem Ansatz konnte eine sehr gute Simulation der PDF-Kurve für alle Testbeispiele erzielt werden. Zur Strukturverfeinerung organischer Substanzen anhand von PDF-Daten wurden zwei Ansätze entwickelt: der Rigid-Body-Ansatz zur Behandlung starrer organischer Moleküle und der Restraint-Ansatz zur Behandlung flexibler organischer Moleküle.
Neben methodischen Entwicklungen wurden in dieser Arbeit zwei weitere Untersuchungen organischer Verbindungen mittels PDF-Analyse durchgeführt.
Es wurden drei, auf unterschiedliche Weise hergestellte, amorphe Proben des Wirkstoffes Telmisartan untersucht. Des Weiteren wurde mittels PDF-Analyse eine pharmazeutische Nanosuspension untersucht.
The baker’s yeast Saccharomyces cerevisiae is a valuable and increasingly important microorganism for industrial applications (Hong and Nielsen, 2012). Its robustness concerning process conditions like low pH, osmotic and mechanical stress as well as toxic compounds is an advantage. Moreover, S. cerevisiae is ‘generally regarded as safe’ (GRAS). The model organism has been studied intensively. The collected data, including genomic, proteomic and metabolic information, can be used to genetically modify and improve its metabolism. Fatty acids and fatty acid derivatives have wide applications as biofuels, biomaterials, and other biochemicals. Several studies have been dealing with the overproduction of fatty acids and derivatives thereof in S. cerevisiae. The fatty acid biosynthesis starting with acetyl-CoA requires two enzymes, the acetyl-CoA carboxylase (Acc1p) and the fatty acid synthase complex (FAS), to produce acyl-CoA esters with predominantly 16 to 18 carbon atoms chain length (Lynen et al., 1980). For the synthesis of monounsaturated fatty acids in S. cerevisiae the ER bound acyl-CoA desaturase, Ole1p is essential (Tamura et al., 1976; Certik and Shimizu, 1999).
Using S. cerevisiae, the first section of this work dealt with the heterologous characterization of potential ω1-desaturases. Due to the fact that unsaturated fatty compounds can be modified further by hydrosilylations, hydrovinylations, oxidations to epoxides, acids, aldehydes, ketones or metathesis reactions, the interest in ω1-fatty acids is tremendous (Behr and Gomes, 2010). With the intention to find enzymes in fungi, that have a terminal desaturase activity a search in different genome databases was performed. The sequences of Pex-Desat3 and Obr-TerDes were used as reference sequences. The analysed proteins from Schizophyllum commune (EFI94599.1), Schizosaccharomyces octosporus (EPX72095.1), Wallemia mellicola (EIM20316.1), Wallemia ichthyophaga (EOR00207.1) and Agaricus bisporus var. bisporus (EKV44635.1), however, finally turned out to be Δ9 desaturases. A fungal desaturase with ω1-activity could not be found. The Δ9 desaturase SCD1 from Mus musculus was crystallized by Bai et al. (2015) and the information for specific amino acids responsible for the substrate specificity or enzyme activity were allocated. In combination with sequence and enzyme activity data form ChDes1 from Calanus hyperboreus, Desat2 from Drosophila melanogaster, Pex-Desat3 from Planotortrix excessana and Obr-TerDes from Operophtera brumata single amino acid exchanges were performed in the Δ9 desaturase Ole1p from S. cerevisiae. For all mutants, only fatty acids (C16 - C18) with a double bond between carbon C9 and C10 could be found. This indicates, that all inserted amino acid exchanges do not affect the substrate specificity or the position of the introduced double bond.
In the second section the focus was in the development of a production system for fatty acids in S. cerevisiae with regard to the previously established procedures by metabolic engineering. The combination of cytosolic malate dehydrogenase (MDH3), cytosolic malate enzyme (MAE1) and a citrate- α-ketoglutarate- carrier (YHM2) should improve the availability of acetyl-CoA in the cytosol, which is an important precursor for the fatty acid biosynthesis. If the major pathway (acetyl-CoA carboxylase and fatty acid synthase) was already optimized by high expression levels than no positive effect on increased fatty acid synthesis was detectable. Only non-optimized strains, with the additional overexpression of ATP-citrate lyase and cytosolic malate dehydrogenase, lead to a 41 % (20 mg/g dcw) improvement of fatty acid synthesis. In order to increase the fatty acid content further, the additional overexpression of DGA1 and TGL3 was performed. Hence, the highest amount of fatty acids could be observed with the strain S. cerevisiae WRY1ΔFAA1ΔFAA4 (2.5 g/L ± 0.8 g/L). The additional elimination of acyl-CoA synthetase Fat1p did not improve the yield.
It was recently reported, that chain length control of the fatty acid synthesis of bacterial FAS can be changed by rational engineering (Gajewski et al., 2017a). The knowledge about bacterial FAS was transferred in this work to S. cerevisiae FAS. Mutating up to five amino acids in the FAS complex enabled S. cerevisiae to produce medium chain fatty acids (C6 - C12). Further improvement was done by metabolic pathway engineering (promoter of alcohol dehydrogenase II from S. cerevisiae (pADH2), deletion of acyl-CoA synthetase FAA2) and optimization of fermentation conditions (YEPD-bacto medium buffered with potassium phosphate). The production of medium chain fatty acids resulted in the highest yield of 464 mg/L (C6 to C12 fatty acids). Furthermore, strains were created specifically overproducing hexanoic acid (158 mg/L) and octanoic acid (301 mg/L). The characterization of transferases, which could be responsible for the de-esterification of CoA-bound fatty acids, was analysed in an additional approach. It could be shown, that the genes EHT1, EEB1 and MGL2 have an influence on the MCFA yield in the supernatant. Generally speaking, the data from the single and double deletion strains suggest that Eeb1p has a selective hydrolytic activity for hexanoic acid-CoA ester, while Eht1p shows selective hydrolytic activity for octanoic acid-CoA ester, which is in line with Saerens et al. (2006).
Protein biosynthesis is a conserved process, essential for life. Proteins are assembled from single amino acids according to their genetic blueprint in the form of a messenger ribonucleic acid (mRNA). Peptide bond formation is catalyzed by ancient ribonucleic acid (RNA) residues within the supramolecular ribosomal complex, which is organized in two dynamic subunits (Ramakrishnan, 2014). Each subunit comprises large ribosomal RNA (rRNA) molecules and several dozens of peripheral proteins. mRNA translation has been divided into three phases, namely translation initiation, elongation and termination in biochemistry textbooks. During initiation, the ribosomal subunits assemble into a functional ribosome on an activated mRNA and acquire the first transfer RNA (tRNA), an adapter between the start codon on the mRNA and the N-terminal methionine of the protein (Hinnebusch and Lorsch, 2012). During elongation, the ribosome translocates along the mRNA exposing one codon after the other, and amino acids are delivered to the ribosome by the respective tRNAs, and attached to the nascent polypeptide chain. During termination, the polypeptide is released and the ribosome remains loaded with mRNA and tRNA at the end of the open reading frame for the translated gene (Hellen, 2018). Bacterial ribosomes are subsequently recycled by a specific ribosome recycling factor and the small ribosomal subunit is simultaneously consigned to initiation factors for a next round of translation – rendering bacterial translation as a cyclic process with an additional ribosome recycling phase. However, the process of ribosome recycling remained enigmatic in Eukarya and Archaea until the simultaneous discovery of the twin-ATPase ABCE1 as the major ribosome recycling factor. Strikingly, ABCE1 has initially been shown to participate in translation initiation (Nürenberg and Tampé, 2013). Thus, closing the translation cycle by revealing the detailed molecular mechanism of ABCE1 and its role for translation initiation are the two goals of this research.
Beyond the plenitude of well-studied translational GTPases, ABCE1 is the only essential factor energized by ATP, delivering the energy for ribosome splitting via two nucleotide-binding sites. Here, I define how allosterically coupled ATP binding and hydrolysis events in ABCE1 empower ribosome recycling. ATP occlusion in the low-turnover control site II promotes formation of the pre-splitting complex and facilitates ATP engagement in the high-turnover site I, which in turn drives the structural re- organization required for ribosome splitting. ATP hydrolysis and ensuing release of ABCE1 from the small subunit terminate the post-splitting complex. Thus, ABCE1 runs through an allosterically coupled cycle of closure and opening at both sites consistent with a processive clamp model. This study delineates the inner mechanics of ABCE1 and reveals why various ABCE1 mutants lead to defects in cell homeostasis, growth, and differentiation (Nürenberg-Goloub et al., 2018).
Additionally, a high-resolution cryo-electron microscopy (EM) structure of the archaeal post-splitting complex was obtained, revealing a central macromolecular assembly at the crossover of ribosome recycling and translation initiation. Conserved interactions between ABCE1 and the small ribosomal subunit resemble the eukaryotic complex (Heuer et al., 2017). The conformational state of ABCE1 at the post-splitting complex confirms the molecular mechanism of ribosome recycling uncovered in this study. Moving further along the reaction coordinate of cellular translation, I reconstitute the complete archaeal translation initiation pathway and show that essential archaeal initiation factors are recruited to the post-splitting complex by biochemical methods and cryo-EM structures at intermediate resolution. Thus, the archaeal translation cycle is closed, following its bacterial model and paving the way for a deeper understanding of protein biosynthesis.
Die hier vorliegende Dissertation befasst sich mit der Synthese von Naturstoffen aus Xenorhabdus und Photorhabdus spp. Da 6,0 - 7,5% ihres Genoms Sekundärmetabolit Clustern zuzuordnen sind, gelten diese entomopathogenen Bakterien als vielversprechende Naturstoffproduzenten. Die Palette der von ihnen produzierten Naturstoffe reicht von Antibiotika über Insektizide bis hin zu potentiellen Zytostatika. Die im Rahmen dieser Arbeit synthetisierten und charakterisierten Substanzen lassen sich in vier Kategorien einteilen: kleine Sekundärmetabolite (Phurealipide), zyklische Makrolaktame (Xenotetrapeptide, GameXPeptide und Ambactin), zyklische Makrolaktone (Szentiamide, Xentrivalpeptide und Xenephematide) und methylierte lineare Peptide (Rhabdopeptide und Rhabdopeptid-ähnliche Moleküle).
Development and implementation of novel optogenetic tools in the nematode Caenorhabditis elegans
(2016)
Optogenetics, though still only a decade old field, has revolutionized research in neurobiology. It comprises of methods that allow control of neural activity by light in a minimally-invasive, spatio-temporally precise and genetically targeted manner. The optogenetic actuators or the genetically encoded light sensitive elements mediate light driven manipulation of membrane potential, intracellular signalling, neuronal network activity and behaviour (Fenno et al. 2011; Dugué et al. 2012). These techniques have been particularly useful for dissecting neural circuits and behaviour in the transparent and genetically amenable nematode model system Caenorhabditis elegans (Husson et al. 2013; Fang-yen et al. 2015).
In fact, C. elegans was the first living organism in which microbial rhodopsin based optogenetic tools (Channelrhodopsin-2 or ChR2, and Halorhodopsin or NpHR) were successfully implemented and bimodal 'remote' control of behaviour was achieved (Nagel et al. 2005; Zhang et al. 2007). Since then it has been a prominent model for the development and application of novel optogenetic tools and techniques, especially in the nervous system which comprises of 302 neurons and is organised in a hierarchical organization. The environmental stimuli are sensed by the sensory neurons, leading to the processing of information by the downstream interneurons, that relay to motor neurons which in-turn synapse onto muscles that drive the movement-based responses.
The microbial rhodopsins like ChR2 and NpHR mediate light driven depolarization and hyperpolarization, respectively and thereby activate or inhibit neural activity. However, they do not allow local control of membrane potential as they are expressed all over the plasma membrane of the cell rather than being restricted to specific domains, for example synaptic sites. Moreover, they completely over-ride the intrinsic activity of the cell, completely bypassing the signal transduction processes inside the cell. Thus, in order to study intracellular signalling and to answer questions pertaining to the endogenous role of receptors and channels in an in-vivo context, the optogenetic tool-kit needs to be expanded.
This thesis aimed at developing and implementing novel optogenetic tools in C. elegans that allow for sub-cellular signalling control as well as endogenous receptor control. These are: two light activated guanylyl cyclases (bPGC and BeCyclOp) to modify cyclic guanosine monophosphate (cGMP) mediated signalling in the sensory neurons, as well as attempts towards rendering endogenous C. elegans receptors - glutamate receptor (GLR-3/-6), acetylcholine receptor (ACR-16), glutamate gated chloride channel (GLC-1) light switchable and to understand their biological function in-vivo.
Organisms respond to sensory cues by activation of a primary receptor followed by relay of information downstream to effector targets by secondary signalling molecules. cGMP is a widely used 2nd messenger in cellular signaling, acting via protein kinase G or cyclic nucleotide gated (CNG) channels. In sensory neurons, cGMP allows for signal modulation and amplification, before depolarization. Chemo-, thermo-, and oxygen-sensation in C. elegans involve sensory neurons that use cGMP as the main 2nd messenger. For example, ASJ is the pheromone sensing neuron regulating larval development, AWC is the chemosensory neuron responding to volatile odours and BAG senses oxygen and carbon dioxide in the environment. In these neurons, cGMP acts downstream of the GPCRs and functions by activating cationic TAX-2/-4 CNG channels, thereby depolarising the sensory neuron. Manipulating cGMP levels is required to access signalling between sensation and sensory neuron depolarization, thereby provide insights into signal encoding. We achieve this by implementing two photo-activatable guanylyl cyclases - 1) a mutated version of Beggiatoa sp. bacterial light-activated adenylyl cyclase, with specificity for GTP (Ryu et al. 2010), termed BlgC or bPGC (Beggiatoa photoactivated guanylyl cyclase) and 2) guanylyl cyclase rhodopsin (Avelar et al. 2014) from Blastocladiella emersonii (BeCyclOp).
bPGC is a BLUF (blue light sensing using flavin) domain containing cyclase which uses FAD as the co-factor and catalyses the synthesis of cGMP from GTP upon activation by blue light. Prior to implementation in sensory neurons, a simpler heterologous system with co-expression of the TAX-2/-4 CNG channel in C. elegans body wall muscle (BWM) was used. The cGMP generated by the light activated cyclases activates the CNG channel leading to the muscle depolarization, thereby causing changes in body length which can be easily scored.
Physical Biology is a field of life sciences dealing with the extraction of quantitative data from biophysical or molecular biological experiments with different levels of complexity. Such data are further used as parameters for mathematical models of the biological system. These models allow to predict reactions on external stimuli by describing the relevant molecular interactions and are therefore used for example to generate a deeper comprehension of complex human diseases. An essential technique in biophysical research on human diseases is fluorescence microscopy. This is a constantly developed toolbox comprising a large number of specific labeling strategies, as well as a broad spectrum of fluorescent probes. It is further minimal invasive and therefore suitable for measurements in living cells or organisms. The sensitivity of modern photo-detectors even allows for the detection of a single fluorescent probe with an accuracy of approximately 10 nm.
...
The model-prediction was further verified by two color SMLM experiments. In this work the development and application of imaging-systems are described which provide quantitative data with single-molecule resolution for systems biological model approaches with a low degree of abstractness. In the near future, the impact of mathematical models in the research field of complex human diseases will increase. The predictions of these models will be more exact, the more detailed and accurate the input parameters will become. This work gives an impression of how quantitative data obtained by SMLM may serve as input parameters for mathematical models at the single-cell level.
This work characterizes the post-PKS modifications of AQ-256. Additionally, the second part describes the establishment of an AQ production platform for electrolyte generation that can be utilized in redox-flow-batteries. Lastly, a silent BGC that encodes the genes for terpenoid biosynthesis was described and characterized with regards to product formation and putative ecological function.