Universitätspublikationen
Refine
Year of publication
- 2014 (28) (remove)
Document Type
- Doctoral Thesis (28) (remove)
Has Fulltext
- yes (28)
Is part of the Bibliography
- no (28)
Keywords
- Beschleuniger (2)
- Nukleosynthese (2)
- Radio Frequenz Quadrupol (2)
- Ageing (1)
- Chopper (1)
- Coulombdissoziation (1)
- Coulombspaltung (1)
- FAIR (1)
- Functional Renormalization Group (1)
- Gammakalorimeter (1)
Institute
- Physik (28) (remove)
High resolution gamma spectroscopy with sophisticated detector arrays significantly contributes to nuclear structure physics. The Advanced Gamma Tracking Array (AGATA) combines gamma tracking and pulse shape analysis to achieve an efficiency and quality of the spectra that could not be reached with spectrometers of the previous generation. Tracking of the photons interacting in the detector requires a precise knowledge of the individual interaction positions. The task of the pulse shape analysis is to provide a position resolution of better than $5mm$ FWHM, a value that could not be achieved by segmentation of the detector alone. As the signals induced on the electrodes of the detectors depends on the position of interaction, the charge pulses can be used to infer the interaction position. To be able to handle high rates, algorithms that are used have to be optimized to be able to process the data in real-time. Pulse shape analysis is the most involved part of the real-time processing and requires further improvement. This work is dealing with optimizations and improvements of pulse shape analysis algorithms. The Grid Search algorithm localizes the interaction position by comparing the measured pulse shape with precomputed shapes in a database to find the best fit. Two linear filters based on orthogonal transformations have been compared and it could be concluded that the one based on a singular value decomposition of the pulse shapes works best. It speeds up the pulse shape analysis by a factor of roughly $2-3$ (depending on how it is combined with the other modifications). Further, a new method to exclude most signals from the database as best fit has been developed based on the principle of lateration. Most interaction positions can be excluded by means of a fast check and for single interactions on average only $34.8\%$ of all signals from the database have to be compared to the measured one. The overhead introduced by the method is negligible and the reduced number of comparisons almost direclty translates into increased efficiency of the algorithm. A similar method could also be applied for double interactions. Two or more interactions taking place in the same segment require special treatment as the measured signals cannot be directly compared to signals from the database. A new method to calculate the figure of merit that quantifies the fit in case of a double interaction has been introduced. Compared to the unmodified algorithm the new method finds the best fit for double interactions roughly two orders of magnitude faster. Actually, the time required to localize double interactions is almost the same as for single interactions. Apart from optimizing the algorithm, also the achievable position resolution was investigated. It strongly varies inside the volume of the detector and it crucially depends on the shape of all signals in the database and the amplitude of the noise present in the measured signals. As a first step towards a precise analytic expression for the position resolution, an estimate for the probability to find the correct position has been derived.
Ultrafast protein dynamics are of great interest for understanding the molecular basis of biochemical function. One method to study structural changes with highest time-resolution starting in the femtosecond regime is 2D-IR spectroscopy. However its application to investigate protein dynamics both with high temporal and spatial resolution is currently limited to few biological systems with intrinsic chromophores. Spectral congestion, the contribution of many similar oscillators to the same signals, makes it difficult to draw conclusions about local structural dynamics in most other proteins.
The aim of this thesis is to extend the application of 2D-IR spectroscopy to a wider range of proteins by introducing unnatural amino acids (UAAs) with azide or nitrile groups as site-specific vibrational probes, which absorb in the free spectral window between 1800 to 3000 cm-1 by using methods from chemical biology.
In a comparative experimental study using FTIR and 2D-IR spectroscopy of single amino acids azidohomoalanine (Aha), a methionine analogue, was identified as preferred label. To demonstrate the application potential of UAAs as site-specific probes, Aha was then incorporated into different positions in a small globular protein. By using both FTIR and ultrafast 2D-IR it was shown, that indeed the local microenvironment as well as conformational fluctuations on picosecond timescale could be monitored with high spatial information. The azide moiety shows a shift of its absorption frequency depending on the polarity of its surrounding. Using this approach, different subensembles for the protein conformations with more polar and less polar environment around the vibrational probe can be distinguished.
A second major application of site-specific labels is the study of vibrational energy transfer processes (VET), predicted to be relevant for allosteric communication in protein domains such as the PDZ domain. VET can be tracked with high spatial resolution using time-resolved IR spectroscopy by exciting a localized vibrational mode and probing separate modes in a two-colour 2D-IR experiment. To extend this kind of experiment to proteins, a specific donor-acceptor pair of two UAAs was introduced. It uses an azulene moiety as donor that can be excited in the visible range but deposits the excess energy by internal conversion into the vibrational modes of the ground state. In small peptides this VET pair was applied successfully, showing a distance-dependent energy transfer induced signal for VET through covalent bonds. These findings bare great promise for the direct observation of vibrational energy flow in proteins in real-time.
Overall this thesis is the basis for extending the usability of 2D-IR spectroscopy to study structural dynamics in a wide range of proteins systems both with high temporal and spatial resolution.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
The nature of spontaneous brain activity during wakefulness and sleep: a complex systems approach
(2014)
In this thesis we study the organization of spontaneous brain activity during wakefulness and all stages of human non-rapid eye movement sleep using an approach based on developments and tools from the theory of complex systems. After a brief introduction to sleep physiology and different theoretical models of consciousness, we study how the organization of cortical and sub-cortical interactions is modified during the sleep cycle. Our results, obtained by modeling global brain activity as a complex functional interaction network, show that the capacity of the human brain to integrate different segregated functional modules is diminished during deep sleep, in line with an informationintegration account of consciousness. We then show that integration is impaired not only across space but also in the temporal domain, by assesing the emergence of long-range temporal correlations in brain activity and how they are modified during sleep. We propose an encompassing explanation for this observation, namely, that the brain operatsat different dynamical regimes during different states of consciousness. Finally, we gather massive amounts of data from different collaborative projects and apply machine learning techniques to reveal that the \resting state" cannot be considered as a pure brain state and is in fact a mixture containing different levels of conscious awareness. This last result has deep implications for future attempts to develop a discovery science of brain function both in health and disease.
The subject of this thesis is the experimental investigation of the neutron-capture cross sections of the neutron-rich, short-lived boron isotopes 13B and 14B, as they are thought to influence the rapid neutron-capture process (r process) nucleosynthesis in a neutrino-driven wind scenario.
The 13;14B(n,g)14;15B reactions were studied in inverse kinematics via Coulomb dissociation at the LAND/R3B setup (Reactions with Relativistic Radioactive Beams). A radioactive beam of 14;15B was produced via in-flight fragmentation and directed onto a lead-target at about 500 AMeV. The neutron breakup of the projectile within the electromagnetic field of the target nucleus was investigated in a kinematically complete measurement. All outgoing reaction products were detected and analyzed in order to reconstruct the excitation energy.
The differential Coulomb dissociation cross sections as a function of the excitation energy were obtained and first experimental constraints on the photoabsorption and the neutron-capture cross sections were deduced. The results were compared to theoretical approximations of the cross sections in question. The Coulomb dissociation cross section of 15B into 14B(g.s.) + n was determined to be s(15B;14B(g:s:)+n) CD = 81(8stat)(10syst) mb ; while the Coulomb dissociation cross section of 14B into a neutron and 13B in its ground state was found to be s(14B;13B(g:s:)+n) CD = 281(25stat)(43syst) mb: Furthermore, new information on the nuclear structure of 14B were achieved, as the spectral shape of the differential Coulomb dissociation cross section indicates a halolike structure of the nucleus.
Additionally, the Coulomb dissociation of 11Be was investigated and compared to previous measurements in order to verify the present analysis. The corresponding Coulomb dissociation cross section of 11Be into 10Be(g.s.) + n was found to be 450(40stat)(54syst ) mb, which is in good agreement with the results of Palit et al.
Within the nucleosynthetic processes of the slow neutron-capture reaction network (called the s process) the so called branching points, unstable isotopes where different nuclear reactions are competing, are important to understand . For modeling and calculating the nucleosynthesis and compare the resulting abundances to the observed ones, it is indispensable to know the branching ratios as well as the corresponding cross sections.
A great challenge in measuring those rates in experiments may be the radioactivity of the isotopes involved, which can make it nearly impossible to manufacture the needed targets. In addition, in stellar environments the excited states of isotopes can be in equilibrium with the ground state, affecting the half-lives and the branching ratios significantly. The isotope 152Eu is such a branching point, with neutron captures and β-decays competing. Those challenges were approached in the s405 experiment performed at the GSI Helmholtzzentrum für Schwerionenforschung GmbH: the challenge the challenge of the radioactivity can be approached by experiments carried out in inverse kinematics with radioactive beams, solving the problem of unstable targets. Also a reversed reaction was used to access the excited states of the studied isotope. The performed 152Sm(p,n)152Eu is a pioneering attempt to use those methods on heavy ions. The (p,n) reaction was used as a substitute for electron capture, the focus lies on reactions with low-momentum transfers, resulting in the emission of low-energy neutrons. The new developed low-energy detector array LENA was put to test for the fist time in the s405 experiment.
This thesis presents experimental studies of proton capture and fragmentation reactions with heavy-ion storage rings. In one experiment, the 96Ru(p, γ)97Rh cross sections near the Gamow window have been measured at the ESR of GSI. In the other experiment, the measurement of the fragmentation yields has been carried out at the CSRe of IMP.
It is essential to determine the cross sections of (γ, p) or (p, γ) reactions for p-process network calculations. However, only very few of the required cross sections have been measured and thus most of them rely solely on Hauser-Feshbach model predictions. The predictions of the model have always very large uncertainties because of the not well-known input parameters. These parameters can be constrained by experiments. Compared to the traditional activation technique, a novel method using a storage ring has been developed to measure the cross sections of (p, γ) reactions in inverse kinematics.
This proton capture experiment has been performed at the ESR, where the circulating 96Ru44+ ions interacted with a hydrogen gas target at 9, 10 and 11 MeV/u. The nuclear reaction products of (p, p), (p, α), (p, n) and (p, γ) reactions were registered by position sensitive detectors. A Geant4 simulation code has been developed to distinguish the (p, γ) reaction products unambiguously from the background reactions. In this work, a relative normalization method has been utilized to accurately determine the cross sections of the (p, γ) reaction. The 96Ru(p, γ)97Rh cross section in the Gamow window of the p process is sensitive to two parameters, i.e., the γ-ray strength function and the optical model potential, while it is mainly sensitive to the γ-ray strength function in the energy region of our experiment. Therefore, our experimental (p, γ) cross sections near 10 MeV/u have been used to directly constrain the γ-ray strength function used in the model. Furthermore, the proton potential has also been constrained by combining our results with additional experimental data for this reaction in the lower energy region. The constrained model has been used to calculate the reaction rate over a wide temperature range, which is an extremely important input for astrophysical calculations.
The yields of fragments produced by 78Kr fragmentation reactions have been measured at the CSRe for the Tz = −1/2 and Tz = 1/2 nuclei along or close to the paths of αp- and rp-processes. The measured yields present a significant odd-even staggering effect for Tz = −1/2 nuclides but they are small for Tz = 1/2 nuclides.
The magnitude of this effect for four consecutive yields has been quantified using a third-order difference formula. It is found that the largest odd-even staggering is reached near the closed shells Z = 20 and Z = 28. Our experimental results could also compared with the data from other experiments with different projectile-target combinations. All these experimental data strongly support the closed shells Z = 20 and Z = 28 for the Tz = −1/2 nuclei.
Cryo-electron tomography (CET) is a unique technique to visualize biological objects under near-to-native conditions at near-atomic resolution. CET provides three-dimensional (3D) snapshots of the cellular proteome, in which the spatial relations between macromolecular complexes in their near native cellular context can be explored. Due to the limitation of the electron dose applicable on biological samples, the achievable resolution of a tomogram is restricted to a few nanometers, higher resolution can be achieved by averaging of structures occurring in multiples. For this purpose, computational techniques such as template matching, sub-tomogram averaging and classification are essential for a meaningful processing of CET data.
This thesis introduces the techniques of template matching and sub-tomogram averaging and their applications on real biological data sets. Subsequently, the problem of reference bias, which restricts the applicability of those techniques, is addressed. Two methods that estimate the reference bias in Fourier and real space are demonstrated. The real space method, which we have named the “M-free” score, provides a reliable estimation of the reference bias, which gives access to the reliability of the template matching or sub-tomogram averaging process. Thus, the “M-free” score makes those approaches more applicable to structural biology. Furthermore, a classification algorithm based on Neural Networks (NN) called “KerDenSOM3D” is introduced, which is implemented in 3D and compensates for the missing-wedge. This approach helps extracting different structural states of macromolecular complexes or increasing the class purity of data sets by eliminating outliers. A comprehensive comparison with other classification methods shows superior performance of KerDenSOM3D.
The elements in the universe are mainly produced by charged-particle fusion reactions and neutron-capture reactions. About 35 proton-rich isotopes, the p-nuclei, cannot be produced via neutron-induced reactions. To date, nucleosynthesis simulations of possible production sites fail to reproduce the p-nuclei abundances observed in the solar system. In particular, the origin of the light p-nuclei 92Mo, 94Mo, 96Ru and 98Ru is little understood. The nucleosynthesis simulations rely on assumptions about the seed abundance distributions, the nuclear reaction network and the astrophysical environment. This work addressed the nuclear data input.
The key reaction 94Mo(g,n) for the production ratio of the p-nuclei 92Mo and 94Mo was investigated via Coulomb dissociation at the LAND/R3B setup at GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt, Germany. A beam of 94Mo with an energy of 500 AMeV was directed onto a lead target. The neutron-dissociation reactions following the Coulomb excitation by virtual photons of the electromagnetic field of the target nucleus were investigated. All particles in the incoming and outgoing channels of the reaction were identified and their kinematics were determined in a complex analysis. The systematic uncertainties were analyzed by calculating the cross sections for all possible combinations of the data selection criteria. The integral Coulomb dissociation cross section of the reaction 94Mo(g,n) was determined to be (571 +- 14 (stat) +- 46 (syst) ) mb. The result was compared to the data obtained in a real photon experiment carried out at the Saclay linear accelerator. The ratio of the integral cross sections was found to be 0.63 +- 0.07, which is lower than the expected value of about 0.8.
The nucleosynthesis of the light p-nuclei 92Mo, 94Mo, 96Ru and 98Ru was investigated in post-processing nucleosynthesis simulations within the NuGrid research platform. The impact of rate uncertainties of the most important production and destruction reactions was studied for a Supernova type II model. It could be shown that the light p-nuclei are mainly produced via neutron-dissociation reactions on heavier nuclei in the isotopic chains, and that the final abundances of these p-nuclei are determined by their main destruction reactions. The nucleosynthesis of 92Mo and 94Mo was also studied in different environments of a Supernova type Ia model. It was concluded that the maximum temperature and the duration of the high temperature phase determine the final abundances of 92Mo and 94Mo.
Das Strahldynamikdesign für den MYRRHA-Injektor wurde im Hinblick auf eine hohe Zuverlässigkeit und Verfügbarkeit, sowie eine verbesserte Strahlausgangsemittanz, neu entwickelt und erfüllt nun die Anforderungen des Kernreaktors.
In der statistischen Fehleranalyse zeigt sich die Strahldynamik der CH-Sektion als äußerst robust und liefert selbst unter pessimistischen Fehlerannahmen eine Transmission von über 99,9 %.
Das neue Injektorkonzept bietet wesentliche Vorteile gegenüber dem in „MAX Referenzdesign 2012“ vorgestellten Injektordesign und wird als neues „MAX Referenzdesign 2014“ für den MYRRHA-Injektor verwendet. Die guten strahldynamischen Eigenschaften des neuen Injektordesigns konnten in Vergleichsrechnungen mit TraceWin am IN2P3@CNRS1 (Institut National de Physique Nucléaire et de Physique des Particules @ Centre National de la Recherche Scientifique, Orsay, Frankreich) bestätigt werden.
Neben der Strahldynamik wurde das HF-Design für die benötigten Beschleunigerkavitäten entwickelt und ebenfalls für eine hohe Zuverlässigkeit und Verfügbarkeit optimiert. Das HF-Design der CH-Strukturen ist für eine größtmögliche Ausfallsicherheit auf den Betrieb mit niedrigen elektrischen Feldgradienten, weit unterhalb der technischen Leistungsgrenzen und Möglichkeiten der jeweiligen Kavität, ausgelegt.
The PANDA experiment at FAIR will perform world class physics studies using high-intensity cooled antiproton beams with momenta between 1.5 and 15 GeV/c. A rich physics program requires very good particle identification (PID). Charged hadron PID for the barrel section of the target spectrometer has to cover the angular range of 22-140° and separate pions from kaons for momenta up to 3.5 GeV/c with a separation power of at least 3 standard deviations. The system that will provide it has to be thin and operate in a strong magnetic field. A ring imaging Cherenkov detector using the DIRC principle meets those requirements. The design of the PANDA Barrel DIRC is based on the successful BABAR DIRC counter with several important changes to improve the performance and optimize the costs. The design options are being studied in detailed Monte Carlo simulation, and implemented in increasingly complex system prototypes and tested in particle beams. Before building the full system prototypes the radiator bars and lenses are measured on the test benches. The performance of the DIRC prototype was quantified in terms of the single photon Cherenkov angle resolution and the photon yield. Results for two full system prototypes will be presented. The prototype in 2011 aimed at investigating the full size expansion volume. It was found that the resolution for this configuration is at the level of in good agreement with ray tracing simulation results. A more complex prototype, tested in 2012, provided the first experience with a compact fused silica prism expansion volume, a wide radiator plate, and several advanced lens options for the focusing system. The performance of the baseline configuration of the prototype with a standard lens and an air gap met the requirements for the PANDA PID for most of the polar angle range but failed at polar angles around 90° due to photon loss at the air gap. Measurements with a prototype high-refractive index compound lens without an air gap at a polar angle of 128° beam angle showed a good resolution of σΘC = 11.8 ± 0.7 mrad and a high photon yield of Nph = 26.1 ± 0.4. Even at polar angles close to 90° the photon yield with this lens exceeded 15 detected photons per particle, meeting the PANDA Barrel DIRC PID requirements for the entire phase space and demonstrating that the compact focusing DIRC is a very promising option for PANDA.
The ab-initio molecular dynamics framework has been the cornerstone of computational solid state physics in the last few decades. Although it is already a mature field it is still rapidly developing to accommodate the growth in solid state research as well as to efficiently utilize the increase in computing power. Starting from the first principles, the ab-initio molecular dynamics provides essential information about structural and electronic properties of matter under various external conditions. In this thesis we use the ab-initio molecular dynamics to study the behavior of BaFe2As2 and CaFe2As2 under the application of external pressure. BaFe2As2 and CaFe2As2 belong to the family of iron based superconductors which are a novel and promising superconducting materials. The application of pressure is one of two key methods by which electronic and structural properties of iron based superconductors can be modified, the other one being doping (or chemical pressure). In particular, it has been noted that pressure conditions have an important effect, but their exact role is not fully understood. To better understand the effect of different pressure conditions we have performed a series of ab-initio simulations of pressure application. In order to apply the pressure with arbitrary stress tensor we have developed a method based on the Fast Inertial Relaxation Engine, whereby the unit cell and the atomic positions are evolved according to the metadynamical equations of motion. We have found that the application of hydrostatic and c axis uniaxial pressure induces a phase transition from the magnetically ordered orthorhombic phase to the non-magnetic collapsed tetragonal phase in both BaFe2As2 and CaFe2As2. In the case of BaFe2As2, an intermediate tetragonal non-magnetic tetragonal phase is observed in addition. Application of the uniaxial pressure parallel to the c axis reduces the critical pressure of the phase transition by an order of magnitude, in agreement with the experimental findings. The in-plane pressure application did not result in transition to the non-magnetic tetragonal phase and instead, rotation of the magnetic order direction could be observed. This is discussed in the context of Ginzburg-Landau theory. We have also found that the magnetostructural phase transition is accompanied by a change in the Fermi surface topology, whereby the hole cylinders centered around the Gamma point disappear, restricting the possible Cooper pair scattering channels in the tetragonal phase. Our calculations also permit us to estimate the bulk moduli and the orthorhombic elastic constants of BaFe2As2 and CaFe2As2.
To study the electronic structure in systems with broken translational symmetry, such as doped iron based superconductors, it is necessary to develop a method to unfold the complicated bandstructures arising from the supercell calculations. In this thesis we present the unfolding method based on group theoretical techniques. We achieve the unfolding by employing induced irreducible representations of space groups. The unique feature of our method is that it treats the point group operations on an equal footing with the translations. This permits us to unfold the bandstructures beyond the limit of translation symmetry and also formulate the tight-binding models of reduced dimensionality if certain conditions are met. Inclusion of point group operations in the unfolding formalism allows us to reach important conclusions about the two versus one iron picture in iron based superconductors.
And finally, we present the results of ab-initio structure prediction in the cases of giant volume collapse in MnS2 and alkaline doped picene. In the case of MnS2, a previously unobserved high pressure arsenopyrite structure of MnS2 is predicted and stability regions for the two competing metastable phases under pressure are determined. In the case of alkaline doped picene, crystal structures with different levels of doping were predicted and used to study the role of electronic correlations.
The present work deals with the integration of variable renewable energy sources, wind and solar energy into the European and US power grid. In contrast to other networks, such as the gas supply mains, the electricity network is practically not able to store energy. Generation and consumption therefore always have tobe balanced. Currently, the load curve is viewed as a rigid boundary condition, which must be followed by the generation system. The basic idea of the approach followed here is that weather-dependent generation causes a shift of focus of the electricity supply. At high shares of wind and solar generation, the role of the rigid boundary condition falls to the residual load, that is, the remaining load after subtraction of renewable generation. The goal is to include the weather dependence as well as the load curve in the design of the future electricity supply.
After a brief introduction, the present work first turns to the underlying weather-, generation and load data, which form the starting point of the analysis. In addition, some basic concepts of energy economics are discussed, which are needed in the following.
In the main part of the thesis, several algorithms are developed to determine the load flow in a network with a high share of wind and solar energy and to determine the backup supply needed at the same time. Minimization of the energy needed from controllable power plants, the capacity variable power plants, and the capacity of storing serve as guiding principles. In addition, the optimization problem of grid extensions is considered. It is shown that it can be formulated as a convex optimization problem. It turns out that with an optimized, international transmission network which is about four times the currently available transmission capacity, much of the potential savings in backup energy (about 40%) in Europe can be reached. In contrast, a twelvefold increase the transmission capacity would be necessary for a complete implementation of all possible savings in dispatchable power plants.
The reduction of the dispatchable generation capacity and storage capacity, however, presents a greater challenge. Due to correlations in the generation of time series of individual countries, it may be reduced only with difficulty, and by only about 30%.
In the following, the influence of the relative share of wind and solar energy is illuminated and examined the interplay with the line capacitance. A stronger transmission network tends to lead to a higher proportion of wind energy being better integrated. With increasing line capacity, the optimal mix in Europe therefore shifts from about 70% to 80% wind. Similar analyses are carried out for the US with comparable results.
In addition, the cost of the overall system can be reduced. It is interesting at this point that the advantages for the network integration may outweigh higher production costs of individual technologies, so that it is more favourable from the viewpoint of the entire system to use the more expensive technologies.
Finally, attention is given to the flexibility of the dispatchable power plants. Starting from a Fourier-like decomposition of the load curve as it was a few years ago, when hardly renewable generation capacity was present, capacities of different flexibility classes of dispatchable power plant are calculated. For this purpose, it is assumed that the power plant park is able to follow the load curve without significant surplusses or deficits. From this examination, it is derived what capacity must at least be available without having to resort to a detailed database of existing power plants.
Assuming a strong European cooperation, with a stronger international transmission network, the dispatchable power capacity can be significantly reduced while maintaining security of supply and generating relatively small surplusses in dispatchable power plants.
In this thesis, a novel 257 kHz chopper device was numerically developed, technically designed and experimentally commissioned; a 4-solenoid, low-energy ion beam transport line was numerically investigated, installed and experimentally commissioned; and a novel massless beam-separation system was numerically developed.
The chopper combines a pulsed electric field with a static magnetic field in an ExB or Wien-filter type field configuration. Chopped beam pulses with a 257 kHz repetition rate and rise times of 110 ns were experimentally achieved using a 14 keV helium beam.
Due to the achieved results, the complete LEBT line for the future Frankfurt Neutron Source FRANZ is ready to deliver a dc or a pulsed beam. At the same time, the LEBT section represents an attractive test stand for the study of low-energy ion beams. It combines magnetic lenses, which allow space-charge compensated beam transport, and a chopper system capable of producing short beam pulses in the hundred nanosecond range. Since these beam pulses are transported onwards, their longitudinal and transverse properties can be analyzed. The pulse duration and time of flight are well below the rise time for the space-charge compensation through residual gas ionization. This opens the possibility for dedicated investigations of the transport of short, low-energy beam pulses including longitudinal and transverse space-charge effects and of relevant issues like the dynamics of space-charge compensation and electron effects in short pulses.
Der Radiofrequenzquadrupol (RFQ) wird typischerweise als erstes beschleunigendes Element in Beschleunigeranlagen eingesetzt. Das elektrische Quadrupolfeld ermöglicht die gleichzeitige Fokussierung und Beschleunigung des Ionenstrahls. Zudem ist der RFQ in der Lage den Gleichstromstrahl von der Ionenquelle zu Teilchenpaketen (Bunche) zu formen, die von den nachfolgenden Driftröhrenbeschleunigern benötigt werden. Ziel der vorliegenden Arbeit war die Untersuchung zur Realisierbarkeit eines 325 MHz 4-rod RFQ Beschleunigers. Die Frequenz von 325 MHz stellt eine ungewöhnlich hohe Betriebsfrequenz für die 4-rod Struktur dar und wird z.B. für den Protonenlinac des FAIR Projektes benötigt. Ein Problem hierbei war, dass durch die bauartbedingten unsymmetrischen Elektrodenaufhängung und der hohen Frequenz ein, das Quadrupolfeld überlagerndes, Dipolfeld erzeugt wird. Dieses störende Feld kann z.B. zu einem Versatz der Strahlachse führen. Hierzu wurde die 4-rod Struktur in Simulationen grundlegend auf Einflüsse von verschiedenen Parametern auf die Resonanzfrequenz und das Dipolfeld untersucht. Es wurden Lösungsstrategien erarbeitet das Diopolfeld zu kompensieren und auf einen Prototypen angewendet. Zudem wurde das Verhalten höherer Schwingungsmoden dieser Struktur simuliert. In diesem Rahmen wurden auch Simulationen zu Randfeldern zwischen den 4-rod Elektroden und der Tankwand untersucht, um nachteilige Effekte für die Strahlqualität auszuschließen. Basierend auf den Simulationsergebnissen wurde ein Prototyp angefertigt. Dieser Prototyp wurde zur Demonstration der Betriebseigenschaften mit Leistungen bis 40 kW getestet. Hierbei wurde die Elektrodenspannung mittels Gammaspektroskopie bestimmt und daraus die Shuntimpedanz berechnet. Diese Werte wurden mit anderen Methoden der Shuntimpedanzbes- timmung verglichen. Außerdem wurden alternative RFQ Resonatorkonzepte ebenfalls auf ihre Realisierbarkeit für den Protonenlinac untersucht. Die Einflüsse verschiedener Parameter auf die Betriebsfrequenz, die Möglichkeiten des Frequenztunings und der Einstellung der longitudinalen Spannungsverteilung gefertigter Modelle wurden in einer Diskussion gegenübergestellt.
The laser-driven acceleration of protons from thin foils irradiated by hollow high-intensity laser beams in the regime of target normal sheath acceleration is reported for the first time. The use of hollow beams aims at reducing the initial emission solid angle of the TNSA source, due to a flattening of the electron sheath at the target rear side. The experiments were conducted at the PHELIX laser facility at the GSI Helmholtzzentrum für Schwerionenforschung GmbH with laser intensities in the range from 10^18 to 10^20 W/cm^2. We observed an average reduction of the half opening angle by (3.07±0.42)° or (13.2±2)% when the targets have a thickness between 12 to 14 μm. In addition, the highest proton energies were achieved with the hollow laser beam in comparison to the typical Gaussian focal spot.
The subatomic world is governed by the strong interactions of quarks and gluons, described by Quantum Chromodynamics (QCD). Quarks experience confinement into colour-less objects, i.e. they can not be observed as free particles. Under extreme conditions such as high temperature or high density, this constraint softens and a transition to a phase where quarks and gluons are quasi-free particles (Quark-Gluon-Plasma) can occur. This environment resembles the conditions prevailing during the early stages of the universe shortly after the Big Bang.
The phase diagram of QCD is under investigation in current and future collider experiments, for example at the Large Hadron Collider (LHC) or at the Facility for Antiproton and Ion Research (FAIR). Due to the strength of the strong interactions in the energy regime of interest, analytic methods can not be applied rigorously. The only tool to study QCD from first principles is given by simulations of its discretised version, Lattice QCD (LQCD).
These simulations are in the high-performance computing area, hence, the numerical aspects of LQCD are a vital part in this field of research. In recent years, Graphic Processing Units (GPUs) have been incorporated in these simulations as they are a standard tool for general purpose calculations today.
In the course of this thesis, the LQCD application cl2qcd has been developed, which allows for simulations on GPUs as well as on traditional CPUs, as it is based on OpenCL. cl2qcd constitutes the first application for Wilson type fermions in OpenCL.
It provides excellent performance and has been applied in physics studies presented in this thesis. The investigation of the QCD phase diagram is hampered by the notorious sign-problem, which restricts current simulation algorithms to small values of the chemical potential.
Theoretically, studying unphysical parameter ranges allows for constraints on the phase diagram. Of utmost importance is the clarification of the order of the finite temperature transition in the Nf=2 chiral limit at zero chemical potential. It is not known if it is of first or second order. To this end, simulations utilising Twisted Mass Wilson fermions aiming at the chiral limit are presented in this thesis.
Another possibility is the investigation of QCD at purely imaginary chemical potential. In this region, QCD is known to posses a rich phase structure, which can be used to constrain the phase diagram of QCD at real chemical potential and to clarify the nature of the Nf=2 chiral limit. This phase structure is studied within this thesis, in particular the nature of the Roberge-Weiss endpoint is mapped out using Wilson fermions.
Das Schwerionenkollisionen Programm der Beschleuniger RHIC und LHC gibt Hinweise auf einen neuen Zustand hadronischer Materie --- das Quark-Gluon Plasma. Dieses zeichnet sich durch eine zumindest partielle Aufhebung des confinements aus, welches besagt, dass keine freien Quarks beochtbar sind.
Aus einer Beschreibung der experimentellen Daten mit relativistischer Hydrodynamik folgen weitere Eigenschaften. So geht das in einer Schwerionenkollision erzeugte Quark-Gluon Plasma nach sehr kurzer Zeit, etwa 1 fm/c, in ein zumindest lokales thermisches Gleichgewicht über. Durch die Lorentzkontraktion der beiden Schwerionen erwartet man, dass der Zustand direkt nach der Kollision durch eine Impulsanisotropie in der transversal-longitudinalen Ebene bestimmt wird. Somit setzt das Erreichen eines thermischen Gleichgewichts zunächst eine Isotropisierung voraus. Bisherige Studien haben gezeigt, dass gluonische Moden bei dieser Isotropisierung durch Verursachung einer chromo-Weibel Instabilität eine entscheidende Rolle spielen.
Weiterhin verhält sich das Quark-Gluon Plasma wie eine fast perfekte Flüssigkeit. Eine Berücksichtigung dissipativer Terme in der hydrodynamischen Beschreibung erfordert das Hinzufügen weiterer Terme zu den entsprechenden Bewegungsgleichungen. Diese sind proportional zu Transportkoeffizienten, welche durch die zugrunde liegende mikroskopische Theorie festgelegt sind.
Diese Theorie ist Quantenchromodynamik. Sie beschreibt die starke Wechselwirkung der Quarks und Gluonen und ist ein fundamentaler Baustein des Standardmodells der Teilchenphysik. Da im Regelfall Prozesse der starken Wechselwirkung nichtperturbativ sind, beschreiben wir QCD unter Verwendung einer Gitterregularisierung. Diese beruht auf einer Diskretisierung der vierdimensionalen Euklidischen Raumzeit durch einen Hyperkubus mit periodischen Randbedingungen und ermöglicht ein Lösen der QCD mit numerischen Methoden. Allerdings ist die Anwendung der Gittereichtheorie auf Systeme im thermischen Gleichgewicht beschränkt und kann somit keine Prozesse beschreiben, die auf Echtzeit basieren.
Transportkoeffizienten entsprechen Proportionalitätskoeffizienten, die die Relaxation einer Flüssigkeit oder eben eines Quark-Gluon Plasmas von einer kleinen Störung beschreiben. Damit sind sie unmittelbar mit der Zeit verknüpft. Über Kubo-Formeln lassen sie sich jedoch mit Gleichgewichtserwartungswerten retardierter Korrelatoren verknüpfen und werden so in Gitter QCD zugänglich.
In der vorliegenden Dissertation berechnen wir den Transportkoeffizienten κ in Gittereichtheorie für das Yang-Mills Plasma. Dabei nutzen wir aus, dass dieser Transportkoeffizient eine triviale analytische Fortsetzung vom retardierten zum Euklidischen Korrelator besitzt, welcher direkt in Gittereichtheorie zugänglich ist. Es ist die erste nichtperturbative Berechnung eines Transportkoeffizienten in QCD ohne weitere Annahmen, wie die Maximum Entropie Methode oder Ansätze, zu treffen.
This thesis serves two main purposes:
1. The introduction of a novel experimental method to investigate phase change dynamics of supercooled liquids
2. First-time measurements for the crystallization behaviour for hydrogen isotopes under various conditions
1) The new method is established by the synergy of a liquid microjet of ~ 5 µm diameter and a scattering technique with high spatial resolution, here linear Raman spectroscopy. Due to the high directional stability and the known velocity of the liquid filament, its traveling axis corresponds to a time axis static in space. Utilizing evaporative cooling in a vacuum environment, the propagating liquid cools down rapidly and eventually experiences a phase transition to the crystalline state. This temporal evolution is probed along the filament axis, ultimately resulting in a time resolution of 10 ns. The feasibility of this approach is proven successfully within the following experiments.
2) A main object of study are para-hydrogen liquid filaments. Raman spectra reveal a temperature gradient of the liquid across the filament. This behaviour can quantitatively be reconstructed by numerical simulations using a layered model and is rooted in the effectiveness of evaporative cooling on the surface and a finite thermal conductivity. The deepest supercoolings achieved are ~ 30% below the melting point, at which the filament starts to solidify from the surface towards the core. With a crystal growth velocity extracted from the data the appropriate growth mechanism is identified. The crystal structure that initially forms is metastable and probably the result of Ostwald’s rule of stages. Indications for a transition within the solid towards the stable equilibrium phase support this interpretation.
The analog isotope ortho-deuterium is evidenced to behave qualitatively similar with quantitative differences being mass related.
In further measurements, isotopic mixtures of para-hydrogen and ortho-deuterium are investigated. It is found that the crystallization process starts earlier and lasts significantly longer compared to the pure substances with the maximum values between 20-50% ortho-deuterium content. A solely temperature based explanation for this effect can be excluded. The difference in the quantum character and hence effective size of the isotopes suggests a strong influence of the progressing liquid-solid-interface. Small dilutions of each para-hydrogen and ortho-deuterium with neon show an even more extended crystallization process compared to above isotopic mixtures. Additionally, the crystal is strongly altered in favor of the equilibrium lattice structure of neon.