Universitätspublikationen
Refine
Year of publication
- 2022 (25) (remove)
Document Type
- Doctoral Thesis (25) (remove)
Has Fulltext
- yes (25) (remove)
Is part of the Bibliography
- no (25)
Keywords
- HADES (2)
- Accelerator (1)
- Activation experiment (1)
- Auditory cortex (1)
- Binary (1)
- Black hole (1)
- CBM (1)
- CPS (1)
- Cross section (1)
- Flow (1)
Institute
- Physik (25) (remove)
Folgend auf den ersten Realisierungen von Bose-Einstein Kondensaten erschienen weitere innovative Experimente, die sich in den optischen Gittern gefangenen Quantengasen widmeten. In diesen zahlreichen, wissenschaftlichen Untersuchungen konnten die Eigenschaften von Bose-Einstein Kondensaten besser verstanden werden. Das Prinzip von Vielteilchensystemen, gefangen in einem periodischen Potential, bot eine Plattform zur Untersuchung weiterer Quantenphasen.
Eine konzeptionell einfache Modifikation von solchen Systemen erhält man durch die Kopplung der Grundzustände der gefangenen Teilchen an hoch angeregten Zuständen mithilfe einer externen Lichtquelle. Im Falle dessen, dass diese Zustände nahe der Ionisationsgrenze des Atoms liegen, spricht man von Rydberg-Zuständen und Atome, welche zu diesen Zuständen angeregt werden, bezeichnet man als Rydberg-Atome. Eines der vielen charakteristischen Eigenschaften von Rydberg-Atomen ist die Fähigkeit über große Entfernungen jenseits der atomaren Längenskalen zu wechselwirken. Im Rahmen von Vielteilchensystemen wurden dementsprechend Kristallstrukturen aus gefangenen Rydberg-Atomen experimentell beobachtet.
Nun stellt sich die Frage, was mit einem gefangenen Bose-Einstein Kondensat passiert, dessen Teilchen an langreichweitig wechselwirkenden Zuständen gekoppelt sind. Gibt es ein Parameterregime, in dem sowohl Kristallstruktur als auch Suprafluidität in solchen Systemen koexistieren können? Dies ist die zentrale Frage dieser Arbeit, die sich mit der Theorie von gefangenen Quantengasen gekoppelt an Rydberg-Zuständen auseinandersetzt.
Im Zentrum dieser Arbeit steht die Diagnostik eines Wasserstoff-Theta-Pinch-Plasmas hinsichtlich der integrierten Elektronen- und Neutralgasdichte mittels Zweifarben Interferometrie. Die integrierte Elektronen- und Neutralgasdichte sind essenzielle Größen, aus welchen sich die Ratenkoeffizienten der Ionisation und Rekombination bei einer Plasma-Ionenstrahl-Wechselwirkung bestimmen lassen.
Ein Theta-Pinch-Plasma ist ein induktiv gezündetes Plasma, wobei das zur Zündung notwendige elektrische Feld durch ein magnetisches Wechselfeld generiert wird. Das induzierte, azimutale elektrische Feld beschleunigt freie Elektronen im Arbeitsgas, welches durch Stoßionisation in den Plasmazustand gebracht wird. Der azimutale Plasmastrom erzeugt einen radialen magnetischen Druckgradienten, der das Plasma komprimiert. Da in axialer Richtung keine Kompressionskraft wirkt, weicht das Plasma einer weiteren Kompression aus, wodurch es zu einer axialen Expansion des Plasmas kommt. Die Expansion erzeugt eine Ionisationswelle im kalten Restgas und es wird eine lange, hoch ionisierte Plasmasäule gebildet.
Dieser hochdynamische Prozess ist mit einem Mach-Zehnder-Interferometer bei der Verwendung von zwei verschiedenen Versionen des Theta-Pinchs zeitaufgelöst untersucht worden. Der Unterschied dieser Versionen liegt in der Geometrie und Induktivität der Spulen, wobei zum einen eine zylindrische und zum anderen eine sphärische Spule eingesetzt worden ist. Das grundlegende Messprinzip beruht darauf, dass das Plasma einen Brechungsindex besitzt, welcher von den Dichten der im Plasma enthaltenen Teilchenspezies abhängt. In einem Wasserstoffplasmas sind dies der Beitrag der freien Elektronen und der des Neutralgases, wodurch ein Zweifarben-Interferometer eingesetzt wird. Um eine von den Laserintensitäten unabhängige Messung zu ermöglichen, wird das heterodyne Verfahren benutzt, bei dem die Referenzstrahlen beider Wellenlängen jeweils mit einem akusto-optischen Modulator frequenzverschoben werden. Durch einen Vergleich mit einem stationären Referenzsignal mittels eines I/Q-Demodulators wird die interferometrische Phasenverschiebung aus dem Messsignal extrahiert.
Mit diesem diagnostischen Verfahren ist die integrierte Elektronen- und Neutralgasdichte des Theta-Pinch-Plasmas bei Variation des Arbeitsdrucks und der Ladespannung der Kondensatorbank untersucht worden. Mit der zylindrischen Experimentversion ist eine optimale Kombination aus integrierter Elektronendichte und effektivem Ionisationsgrad η von (1,45 ± 0,04) · 1018 cm−2 bei η = (0,826 ± 0,022) bei einem Arbeitsdruck von 20 Pa und einer Ladespannung von 16 kV ermittelt worden. Dagegen beträgt die optimale Kombination bei einem Arbeitsdruck von 20 Pa und einer Ladespannung von 18 kV bei Verwendung der sphärischen Experimentversion lediglich (1,23 ± 0,03) · 1018 cm−2 bei η = (0,699 ± 0,019).
Des Weiteren ist bei beiden Experimentversionen nachgewiesen worden, dass die integrierte Elektronendichte dem oszillierenden Strom folgend periodische lokale Maxima zeigt, welche zeitlich mit signifikanten Einbrüchen in der integrierten Neutralgasdichte zusammenfallen. Diese Einbrüche werden durch die axiale Expansion des Plasmas und der damit verbundenen Ionisationswelle im Restgas erzeugt. Neben diesem zentralen Teil dieser Arbeit ist eine lasergestützte polarimetrische Diagnostik durchgeführt worden, mit der die longitudinale Komponente der magnetischen Flussdichte der Theta-Pinch-Spulen zeit- und ortsaufgelöst bestimmt worden ist. Als Messprinzip ist der Faraday-Effekt eines magneto-optischen TGGKristalls verwendet worden.
Vor der polarimetrischen Diagnostik ist der TGG-Kristall bezüglich seiner Verdet- Konstante kalibriert worden, wobei ein Wert von V = (−149,7 ± 6,4) rad/Tm gemessen worden ist. Die ortsaufgelöste polarimetrische Diagnostik ist durch einen Seilzug ermöglicht worden, mit dem der TGG-Kristall auf einem Schlitten an unterschiedliche Positionen entlang der Spulenachse gefahren werden konnte. An den jeweiligen Messpunkten ist für beide Experimentversionen die magnetische Flussdichte für verschiedene Ladespannungen zeitaufgelöst bestimmt worden. Als Messverfahren ist dabei das Δ/Σ-Verfahren eingesetzt worden, mit dem sich eine intensitätsunabhängige Messung erzielen ließ.
Die ortsaufgelösten Messergebnisse fallen gegenüber Simulationen allerdings zu niedrig aus. Bei der zylindrischen Spule betragen die Abweichungen im Spulenzentrum circa 14 - 16% und bei der sphärischen Spule in etwa 16 - 18%. Bei einer Normierung der Messwerte und der simulierten Werte auf den jeweiligen Wert im Zentrum ist dagegen innerhalb der Fehler eine völlige Übereinstimmung zwischen den Messwerten und der Simulation für die zylindrische Spule erzielt worden. Als Ursache der negativen Abweichungen wird die Hysterese des TGG-Kristalls diskutiert. Es zeigt sich insbesondere zu Beginn der Entladung eine zeitliche Verzögerung der gemessenen magnetischen Flussdichte gegenüber dem Strom, die in der Umgebung des Stromnulldurchgangs besonders stark ausgeprägt ist.
The development of the designs of the superconducting CH cavities of the HELIAC project from CH0 [27] to CH1 and CH2 [1] has undergone permanent improvements and adaptations based on the learned experiences of each previous cavity. For example, the design of CH1 and CH2 focused on mechanical stabilization and optimization of performance by minimizing peak electric and magnetic fields. As a result, the changes made there were already able to increase stability and performance compared to CH0 by simplifying the design in different ways. The process of designing both cavities was time reasonable, since they are identical in construction and thus only one design had to be developed. However, for both the development and manufacturing of an entire accelerator of individual CH cavities, this type of design would become too time consuming and costly. In order to reduce this time-consuming design process and accelerate the fabrication of superconducting CH cavities, and also reduce costs, a modular cavity design for mass production of superconducting CH cavities was developed as presented in this thesis. In the following section, the conclusions gained in this work and the results already presented will be summarized once again.
So in the first chapters of this thesis the theoretical foundations were laid, which are necessary for the description of superconducting cavities and for their development process, like a theoretical description of superconductivity itself (see chapter 2), the physical basics of RF-acceleration and of the CH cavity (see chapter 3), but also the effects that limit the superconducting cavities in terms of acceleration (see chapter 4) or the properties and laws from structural mechanics needed in later measurements and simulation (see chapter 5). Based on the theoretical foundations given in these sections, all measurements, evaluations and simulations made in the following sections were made.
Single-electron transport in focused electron beam induced deposition (FEBID)-based nanostructures
(2022)
Mit steigender Komplexität von integrierten Schaltungen im Nanometer-Maÿstab werden immer innovativere Techniken nötig, um diese zu fabrizieren. Dies erfordert einen starken Fokus auf die Kontrolle der Fabrikation akkurater Strukturen und der Materialreinheit, und dies im Zusammenhang mit einer skalierbaren Produktion. In diesem Kontext hat Elektronenstrahlinduzierte Abscheidung (engl. Focused Electron Beam Induced Deposition, FEBID) eine wachsende Aufmerksamkeit im Bereich der Nanostrukturierung gewonnen. Der FEBID-Prozess basiert auf der lokalen Abscheidung von Material auf einem Substrat. Das Deponat entsteht durch die Spaltung von Präkursor-Molekülen durch die Interaktion mit einem Elektronenstrahl entsteht. Als Beispiel sei hier der Präkursor Me3PtCpMe angeführt. Das auf dem Substrat abgelagerte Material besteht aus wenigen Nanometer großen Kristalliten aus Platin, welche in einer Matrix aus amorphem Kohlenstoff eingebettet sind. Die Pt-C FEBID Ablagerungen sind nano-granulare Metalle, deren elektrische Transporteigenschaften die Folge des Zusammenspiels von diffusivem Transport von Ladungen innerhalb der Pt-Kristalliten und temperaturabhängigen Tunneleffekten sind. Das größte Interesse an diesen Materialien liegt an der Möglichkeit, Strukturen für technische Anwendungen im Nanometerbereich herstellen zu können.
In dieser Arbeit wurden Anwendungen, die auf Einzelelektroneneffekten beruhen, ausgewählt, um die FEBID basierte Probenpräparation zu testen. Um Einzelelektronentransport zu ermöglichen, der auf dem Tunneln einzelner Elektronen basiert, müssen alle Parameter wie Grösse und Abstände der Strukturen genauestens definiert sein. Im Rahmen dieser Arbeit wurden Einzelelektronenbausteine entwickelt, die auf zwei unterscheidlichen Anwendungen des Pt-C FEBID-Prozesses basieren. Die beiden Anwendungen sind: 1) Arrays von Gold-Nanopartikeln (Au-NP), welche mittels Pt-Strukturen kontaktiert wurden, die mit FEBID präpariert und anschlieÿend aufgereinigt wurden; 2) Einzelelektronentransistoren (engl. Single-Electron Transistors, SET), deren Inseln aus elektronennachbestrahlten Pt-C FEBID Deponate bestehen. Die elektrischen Eigenschaften der präparierten Nanostrukturen wurden charakterisiert und mit der erzielten Auflösung und Materialqualität in Relation gesetzt. Es wurden Optimierungen an der Präparationsmethode durchgeführt, welche direkt die Leitfähigkeit des Pt-C FEBID-Materials erhöhen. Dies kann durch die Änderung der
Karbonmatrix oder die Erhöhung des metallischen Gehalts der Struktur geschehen. In dieser Arbeit wurde eine katalytische Aufreinigungsmethode von Pt-C FEBID Strukturen für zwei Anwendungen genutzt: zum Einen wurden die aufgereinigten Strukturen als Keimschichten für die nachfolgende ortsgenaue Atomlagenabscheidung (engl. Area-Selective Atomic Layer
Deposition, AS-ALD) von Pt-Dünnschichten genutzt. Zum Anderen wurde diese Technik dafür genutzt, Metallbrücken zwischen den bereits durch Auftropfen zufällig auf dem Substrat aufgebrachten NP-Gruppen und den zuvor aufgebrachten UV-Lithographie (UVL) präparierten Cr-Au Kontakten zu erzeugen. Eine NP-Gruppe ist ein periodisches, granulares Array von Partikeln, welche uniform in Größe und Form sind und einen unterschiedlichen Grad von Ordnung inne haben. Durch die Art des Aufbringens kann die Anordnung der Nanopartikel durch Lösen und Erzeugen der Verbindungen beeinflusst werden. Diese Systeme zeigen ein Verhalten wie Tunnelkontakte mit Coulombblockade und eine Verteilung der Schwellspannung. Die Ergebnisse der elektrischen Messungen bestätigen den Einzelelektronentransport durch die Nanopartikel in einem typischen Elektronentransportregime mit schwacher Kopplung. Trotz dieser Ergebnisse war die Anwendung dieser Technik für die SET Nanostrukturierung nicht erfolgreich. Die Ursache
konnte zurückgeführt werden auf das Vorhandensein von Pt-Partikeln in der Nähe der Kontakte zu den Au-NP-Arrays. Die Pt-Partikel sind durch den FEBID Fertigungsprozess in
der Nähe der vorgegebenen Struktur entstanden. Aus diesem Grund wurde das FEBID Co-Deponat in der folgenden SET-Nanofabrikation entfernt.
Ein SET basiert auf einer Nano-Insel, welche durch Tunnelkontakte mit Source- und Drain-Elektroden verbunden ist. Darüber hinaus besteht eine kapazitive Verbindung zu einer
oder mehreren Gate-Elektrode(n). Innerhalb der Insel gibt es eine feste Anzahl von Elektronen.
In dieser Arbeit wurden die Source-, Drain- und Gate-Kontakte durch Ätzen mittels eines fokussierten Gallium-Strahls erzeugt, was Abstände von 50nm ermöglichte, wohingegen die SET Insel mit Pt-C FEBID-Material erzeugt wurde. Die Leitfähigkeit der Insel aus Pt-C wurde mit anschließender Elektronenbestrahlung erhöht. Als letzter Präparationsmethode wurde ein neueartiges Argon-Ätzverfahren genutzt, um die durch FEBID erzeugten Co-Ablagerungen in der direkten Umgebung der Insel zu entfernen. Durch die Elektronennachbestrhalung kann die Kopplung der einzelnen metallischen Kristalliten angepasst werden. Die Auswirkungen unterschiedlicher starker Tunnelkontakte auf die elektronischen Eigenschaften der Insel und die daraus resultierende Performanz des SETs wurden in dieser Arbeit beobachtet ...
Navigating a complex environment is assumed to require stable cortical representations of environmental stimuli. Previous experimental studies, however, show substantial ongoing remodeling at the level of synaptic connections, even under behaviorally and environmentally stable conditions. It remains unclear, how these changes affect sensory representations on the level of neuronal populations during basal conditions and how learning influences these dynamics.
Our approach is a joint effort between the analysis of experimental data and theory. We analyze chronic neuronal population activity data – acquired by out collaborators in Mainz – to describe population activity dynamics during basal dynamics and during learning (fear conditioning). The data analysis is complemented by the analysis of a circuit model investigating the link between a neural network’s activity and changes in its underlying structure.
Using chronic two-photon imaging data recorded in awake mouse auditory cortex, we reproduce previous findings that responses of neuronal populations to short complex sounds typically cluster into a near discrete set of possible responses. This means that different stimuli evoke basically the same response and are thus grouped together into one of a small set of possible response modes. The near discrete set of response modes can be utilized as a sensitive and robust means to detect and track changes in population activity over time. Doing so we find that sound representations are subject to a significant ongoing remodeling across the time span of days under basal conditions. Auditory cued fear conditioning introduces a bias into these ongoing dynamics, resulting in a differential generalization both on the level of neuronal populations and on the behavioral level. This means that sounds that are perceived similar to the conditioned stimulus (CS+) show an increased co-mapping to the same response mode the CS+ is mapped to. This differential generalization is also observed in animal behavior, where sounds similar to the CS+ result in the same freezing behavior as the CS+, whereas dissimilar sounds do not. These observations could provide a potential mechanism of stimulus generalization, which is one of the most common phenomena associated with post-traumatic stress disorder, on the level of neuronal populations.
To investigate how the aforementioned changes in neuronal population activity are linked to changes in the underlying synaptic connectivity, we devised a circuit model of excitatory and inhibitory neurons. We studied this firing rate model to investigate the effect of gradual changes in the network’s connectivity on its activity. Apart from an input dominated uni-stable regime (one response per stimulus independent of the network) and a network dominated uni-stable regime (one response per network independent of the stimulus), we also find a multi-stable regime for strong recurrent connectivity and a high ratio of inhibition to excitation. In this regime the model reproduces properties of neural population activity in mouse auditory cortex, including sparse activity, a broad distribution of firing rates, and clustering of stimuli into a near discrete set of response modes. This clustering in the multi-stable regime means that, not only can identical stimuli evoke different responses, depending on the network’s initial condition, but different stimuli can also evoke the same response.
Applying gradual drift to the network connectivity we find periods of stable responses, interrupted by abrupt transitions altering the stimulus response mapping. We study the mechanism underlying these transitions by analyzing changes in the fixed points of this network model, employing a method to numerically find all the fixed points of the system. We find that such abrupt transitions typically cannot be explained by the mere displacement of existing fixed points, but involve qualitative changes in the fixed point structure in the vicinity of the response trajectory. We conclude that gradual synaptic drift can lead to abrupt transitions in stimulus responses and that qualitative changes in the network’s fixed point topology underlie such transitions.
In summary we find that cortical networks display ongoing representational drift under basal conditions that is biased towards a differential generalization during fear conditioning. A circuit model is able to reproduce key characteristics of auditory cortex, including a clustering of stimulus responses into a near discrete set of response modes. Implementing synaptic drift into this model leads to periods of stable responses interrupted by abrupt transitions towards new responses.
The present work deals with photoionization in the realm of the absorption of one single photon. The formal treatment of one-photon ionization usually employs a semi-classical approach, where the electron’s initial and final states are described as quantum-mechanical wave functions but the photon is treated as a classical electromagnetic wave. In the calculation of photoionization cross sections with this semi-classical method, there is an often used approximation which is called the electric dipole approximation. Mathematically, the application of the dipole approximation corresponds to truncating the series expansion of an exponential after the leading term. Physically, this means neglecting the linear photon momentum and the spatial dependence of the light field. The dipole approximation is valid if the wavelength of the light is much larger than the spatial extent of the target and if the photon momentum is small compared to the momenta of the reaction products, which is generally the case for photon energies short above the electron binding energy.
For the present work, we experimentally investigated nondipolar photoionization, i.e., one-photon ionization at high photon energies where the dipole approximation breaks down. In our experiments, we irradiated single atoms and molecules with such high-energetic photons and measured the three-dimensional momentum distributions of the reaction fragments to uncover the effects of the linear photon momentum and the spatially-dependent light field on photoionization. Our observations allow the first profound insight into photoionization that reveals all photon properties, i.e., photon energy, spin, linear momentum, and the speed of light. Hopefully, our efforts make a constructive contribution to the understanding and the further exploration of light-matter interaction.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.
The stellar nucleosynthesis of elements heavier than iron can primarily be attributed to neutron capture reactions in the s and r process. While the s process is considered to be well understood with regards to the stellar sites, phases and conditions where it occurs, nucleosynthesis networks still need accurate neutron capture cross sections
with low uncertainties as input parameters. Their quantitative outputs for the isotopic abundances produced in the s process, coupled with the observable solar abundances, can be used to indirectly infer the expected r process abundances. The two stable gallium isotopes, 69Ga and 71Ga, have been shown in sensitivity studies to have considerable impact on the weak s process in massive stars. The available experimental data, mostly derived from neutron activation measurements for quasi-stellar neutron spectra at kBT = 25 keV, show disagreements up to a factor of three.
Determining the differential neutron capture cross section can provide input data for the whole range of astrophysically relevant energies. To that end, a neutron time of flight experimental campaign at the n_TOF facility at CERN was performed for three months, using isotopically enriched samples of both isotopes. The data taken at the EAR1 experimental area covered a wide neutron energy range from thermal to several hundred keV. The respective differential and spectrum averaged neutron capture cross sections for 69Ga and 71Ga were determined in this thesis. They show good agreement with the evaluated cross sections for 71Ga, but reproduce the deviations from the evaluated data that other, more recent activation measurements showed for 69Ga.
Die minoren Aktinoiden dominieren auf lange Sicht die Radioaktivität des gesamten abgebrannten Brennstoffes und können somit, obwohl sie nur etwa 0,2 % davon ausmachen, als die Hauptverursacher der Endlagerproblematik betrachtet werden.
Neben einer möglichen Endlagerung und den damit verbundenen Problemen, bietet die Transmutation eine Alternative im Umgang mit dieser Art der radioaktiven Abfälle. Hierbei werden die minoren Aktinoide durch Neutroneneinfang zur Spaltung angeregt, wodurch sowohl deren Halbwertszeit, als auch deren Radiotoxizität deutlich reduziert werden soll.
Innerhalb des in der vorliegenden Arbeit vorgestellten MYRRHA-Projektes, das im belgischen Mol realisiert werden soll, soll gezeigt werden, dass die Transmutation in einem industriellen Maßstab möglich ist. Bei MYRRHA handelt es sich um ein sog. ADS (Accelerator Driven System), bei dem ein 4 mA Protonenstrahl mit 600 MeV in einem Target aus LBE (Lead-Bismuth Eutectic) per Spallation Neutronen erzeugen soll, die für die Transmutation in einem ansonsten unterkritischen Reaktor notwendig sind. Da eine solche Anlage enorme Ansprüche an die Zuverlässigkeit des Teilchenstrahls stellt, um den thermischen Stress innerhalb des Reaktors so gering wie möglich zu halten, werden auch hohe Ansprüche an die verwendeten Kavitäten innerhalb des Beschleunigers gestellt.
Besonderes Augenmerk muss hierbei auf den Injektor gelegt werden. In diesem wird der Protonenstrahl auf 16,6 MeV beschleunigt, wobei in seinem aktuellen Design nur noch normalleitende Kavitäten verwendet werden.
Als erstes beschleunigendes Bauteil nach der Ionenquelle fungiert hier ein im Rahmen der vorliegenden Arbeit gebauter 4-Rod-RFQ, dessen HF-Design auf dem bereits am IAP getesteten MAX-Prototypen basiert.
Für den MYRRHA-RFQ konnte eine neue Art der Dipolkompensation für 4-Rod-RFQs entwickelt werden, die bereits in anderen Beschleunigern, wie etwa dem neuen HLI-RFQ-Prototypen eingesetzt werden konnte. Hierbei werden die Stützen, auf denen die Elektroden befestigt werden alternierend verbreitert, um so den Strompfad zum niedrigeren Elektrodenpaar zu verlängern, wodurch sich die dortige Spannung erhöht. Im Zuge dieser Entwicklung wurden Simulations- und Messmethoden erarbeitet, um den Dipolanteil sowohl an bereits gebauten, wie auch an zukünftigen 4-Rod-RFQs untersuchen zu können. Der Erfolg dieser neuartigen Dipolkompensation konnte in den Low-Level-Messungen, die sich an den Zusammenbau des MYRRHA-RFQs anschlossen, validiert werden.
Die CH-Sektion, die im MYRRHA-Injektor auf den RFQ und die MEBT folgt, besteht aus insgesamt 16 normalleitenden Kavitäten. Sie gliedert sich in sieben beschleunigende CHs, auf die ein CH-Rebuncher und weitere acht beschleunigende CHs folgen.
Im Rahmen der vorliegenden Arbeit wurde - aufbauend auf bereits vorhandenen Entwürfen - das Design der ersten sieben CH-Strukturen des MYRRHA-Injektors erstellt und hinsichtlich seiner HF-Eigenschaften optimiert.
Die dabei während den Simulationen zu CH1 auftretende Problematik einer parasitären Tunermode konnte durch zahlreiche Simulationen umgangen werden.
Weiter wurde das aus der FRANZ-CH bekannte Kühlkonzept überarbeitet, um eine hohe thermische Stabilität gewährleisten zu können, wobei mehrere verschiedene Konzepte entwickelt, simuliert und bewertet wurden.
Das so entwickelte HF- und Kühldesign der ersten sieben MYRRHA-CHs dient als Vorlage für die weiteren MYRRHA-CHs sowie für zukünftige Beschleunigerprojekte, wie etwa HBS am Forschungszentrum Jülich.
Im Anschluss an die Designphase wurden die ersten beiden CH-Strukturen des Injektors und ein zusätzlicher dickschichtverkupferter Deckel für CH1 von den Fimen NTG und PINK gefertigt und anschließend Low-Level-Messungen unterzogen, in denen die Simulationsergebnisse bestätigt werden konnten, während diese Messungen zusätzlich als Vorbereitung für die Konditionierung dienten.
Sowohl der MYRRHA-RFQ, als auch die CH-Strukturen wurden nach ihren jeweiligen Low-Level-Messungen duch eine Konditionierung auf den späteren Strahlbetrieb vorbereitet.\\
Die Konditionierung des MYRRHA-RFQ erfolgte in zwei Phasen. Zunächst wurde er in der Experimentierhalle des IAP im cw-Betrieb vorkonditioniert, bevor er nach Louvain-la-Neuve transportiert wurde. In der dort fortgesetzten Konditionierung, die sowohl gepulst, als auch im cw-Betrieb erfolgte, konnten im Rahmen dieser Arbeit 120 kW cw stabil eingkoppelt werden, wobei diese transmittierte Leistung später noch vom SCK auf bis zu 145 kW cw gesteigert wurde. Nach Abschluss der Konditionierung konnten sowohl vom IAP, als auch vom SCK Röntgenspektren aufgenommen werden, um so die Shuntimpedanz bestimmen zu können. Die Ergebnisse dieser Messungen zusammen mit der alternativen Bestimmung der Shuntimpedanz über den R/Q-Wert wurden ebenfalls in dieser Arbeit besprochen.
Die CH-Kavitäten wurden im Bunker der Experimentierhalle des IAP konditioniert, wobei zusätzlich neue Konditionierungsmethoden erarbeitet und erprobt werden konnten. In den abschließenden Untersuchungen, die sich an jede der drei Konditionierungen anschlossen, konnten Erkenntnisse über das thermische Verhalten der CHs, sowie über den Einfluss verschiedener Verschaltungen des Kühlsystems darauf gewonnen werden, die bei der Installation auch zukünftiger CHs von Nutzen sein werden.
Sensors for high rate charge particle tracking have to withstand the harsh radiation doses deposited by the particles to be sensed. This holds particularly for the novel CMOS Monolithic Active Pixel Sensors, which are considered a promising sensor technology for future vertex detectors due to their very light material budget and excellent spatial resolution. To resist the radiation doses expected close to the interaction regions of heavy-ion experiments, the sensors have to be hardened against radiation doses, which exceed the native tolerance of CMOS technology significantly. In this thesis, the results of non-ionizing radiation hardness studies at the IKF on sensor prototypes developed at the IPHC in Strasbourg are presented. Our results demonstrate that the CMOS sensors evaluated in the context of this thesis can withstand non-ionizing radiation of up to 5×10^14 neq/cm^2. This hardness qualifies them as promising candidates for use in future vertex detectors.
High-resolution, compactness, scalability, efficiency – these are the critical requirements which imaging radar systems have to fulfil in applications such as environmental monitoring, cloud mapping, body sensing or autonomous driving. This thesis presents a modular millimetre-wave frequency modulated continuous-wave (FMCW) radar front-end solution intended for such applications. High-resolution is achieved by enlarging the operating frequency band of the radar system. This can be realized at millimetre-wave frequencies due to the large spectrum availability. Furthermore, the size of components decreasing with increasing frequency makes millimetre-wave systems a good candidate for compactness. However, the full integration of radar front-ends is a challenge at millimetre-wave frequencies due to poor signal integrity and spectral purity, which are essential for imaging applications. The proposed radar uses an alternative technique and tackles this limitation by featuring highly-integrable architectures, specifically the Hartley architecture for signal conversion and enhanced push-pull amplifier for harmonic suppression. The resolution of imaging radars can be further improved by increasing the number of transmitters and receivers. This has spurred the investigation of spectrum, time and energy-efficient multiplexing techniques for multi-input multi-output (MIMO) radar systems. The FMCW radar architecture proposed in this thesis is based on code-division technique using intra-pulse, also called intra-chirp modulation. This advanced scalable and non-complex solution, made possible by the latest achievements on direct digital synthesis for signal generation, guarantees signal integrity and compact size implementation. The proposed architecture is investigated by a thorough system analysis. A transmitter module and a receiver module for a 35 GHz imaging radar prototype are designed, fabricated and fully characterized to validate the feasibility of our novel approach for high-resolution highly-integrated MIMO front-ends.
We study the polarization of relativistic fluids using the relativistic density operator at global and local equilibrium. In global equilibrium, a new technique to compute exact expectation values is introduced, which is used to obtain the exact polarization vector for fields of any spin. The same result has been extended to the case of massless fields. Furthermore, it is demonstrated that at local equilibrium not only the thermal vorticity but also the thermal shear contribute to the polarization vector. It is shown that assuming an isothermal local equilibrium, the new term can solve the polarization sign puzzle in heavy ion collisions.
This work ties in with the investigation of the intermediate valent states and valence fluctuations in certain europium based intermetallic systems. Valence fluctuations are a property of the electronic system of a compound that is possibly accompanied by structural effects, which, in some cases, are quite noticable. By assuming how the changes in the electronic system and in the crystal lattice are connected, valence _uctuations of europium are believed to be a possible probe for the theory of quantum critical elasticity, which is investigated on by the SFB TRR 288 (Frankfurt, Mainz, Karlsruhe, Bochum, Dresden).
Here, the proceedings in growing single crystals of di_erent compounds related to this _eld of research are reported. This includes the ThCr2Si2 (122) type compounds EuPd2Si2 as well as the doping series EuPd2(Si1-xGex)2, the Europium based ternary Phosphides EuFe2P2, EuCo2P2, EuNi2P2 and EuRu2P2, and attempts to grow compounds of a derived 1144 structure by ordered substitution of half the Europium, EuKRu4P4.
The largest part of this work focusses on the EuPd2Si2 system, which exhibits intermediate valent europium and a temperature dependent transition between two di_erent intermediate valent states of europium. Crystals of this system were grown using the Czochralski method with a levitating melt and an europium excess flux after a two step prereaction process. Also, explorations of a PdSi-rich flux and external flux methods are reported. Ten Czochralski grown experiments, in six generations iteratevely seeded by the previous generation, were prepared.
Thermodynamical and structural analyses of the crystals located the transition between the di_erent intermediate valent states of europium between 140K and 165 K, transitioning from a high temperature Eu2.3+ state to a low temperature Eu2.7+ state, and classified it as a second order transition. To this transition a lattice anomaly of the a-parameter collapsing about 2% is connected, while the c-parameter remains largely unaffected. Large differences between individual samples can be explained by combining thermodynamical and structural analyses with compositional analysis, revealing the valence transition temperature as strongly dependent on the sample composition and Pd-Si site interchanges.
Searching to change the character of the valence transition to first order, silicon was substituted by germanium to introduce negative pressure. Germanium substituted samples of EuPd2(Si1-xGex)2 were grown using the Czochralski method with the optimized parameters from the growth experiments for the undoped compound. Samples were prepared with a nominal substitution of x = 0.05, x = 0.10, x = 0.15, x = 0.20 (twice) and x = 0.30. For the EuPd2(Si1-xGex)2 system, a phase diagram for the europium valence states is derived from chemical and thermodynamical characterizations.
n ternary europium phosphides EuT2P2, the position of the compounds in the generalized phase diagram and the question of long range magnetic order or valence transition appear connected to an isostructural transition of the tetragonal crystal structure, drastically decreasing the length of the c-parameter while establishing covalent bonds between phosphorus atoms of different interlayers of the structure, the so called ‚collapse‘. While EuFe2P2, EuT2P2 and EuCo2P2 display both long range magnetic order and a non-collapsed crystal structure, EuNi2P2 shows both a valence transition between two intermediate valent states at a characteristic temperature of 36K - accompanied by a small lattice anomaly of the a-parameter shrinking about 0.2% - and a collapsed crystal structure. Samples of EuFe2P2, EuCo2P2 and EuNi2P2 were grown in tin flux and using solid-solid sintering approaches.
Single crystals of EuFe2P2, EuCo2P2 and EuRu2P2 were investigated at ESRF in Grenoble with single crystal X-ray di_ractometry on a pressure range up to 15GPa and at temperatures down to 15K to investigate the nature of the structural transitions in the compounds. While in EuCo2P2 the structural transition occurs as a transition of first order at all temperatures (e.g. at 2GPa for 15 K), in EuFe2P2 and EuRu2P2 the structural collapse evolves over a broad pressure range up to 8GPa and as a transition of second order troughout the temperature ranges, albeit seeming to sharpen at lower temperatures. From the crystallographic data, elastic constants of the compounds could be derived, revealing EuFe2P2 and EuRu2P2 as unexpectedly elastic materials.
In order to probe the structural collapse at more accessible pressures, crystals with a sturcture derived from the 122 structure, but with ordered 50% substitution of europium and hence altering the symmetry from I4/mmm to P4/mmm in a 1144 structure, were exploratively pursued. Different experiments to obtain EuAT4P4 (with A = K, Rb, Cs and T = Fe, Ru) from binary or ternary prereactants or directly from the elements remained largely unsuccessful.
We discuss aspects of the phase structure of a three-dimensional effective lattice theory of Polyakov loops derived from QCD by strong coupling and hopping parameter expansions. The theory is valid for the thermodynamics of heavy quarks where it shows all qualitative features of nuclear physics emerging from QCD. In particular, the SU(3) pure gauge effective theory also exhibits a first-order thermal deconfinement transition due to spontaneous breaking of its global Z₃ center symmetry. The presence of heavy dynamical quarks breaks this symmetry explicitly and consequently, the transition weakens with decreasing quark mass until it disappears at a critical endpoint. At non-zero baryon density, the effective theory can be evaluated either analytically by the so-called high-temperature expansion which does not suffer from the sign problem, or numerically by standard Monte-Carlo methods due to its mild sign problem. The first part of this work devotes to a systematic derivation of the effective theory up to the 6th order in the hopping parameter κ. This method combined with the SU(3) link update algorithm provides a way to simulate the O(κ⁶) effective theory. The second part involves a study of the deconfinement transition of the pure gauge effective theory, with and without static quarks, at all chemical potentials with help of the high-temperature expansion. Our estimate of the deconfinement transition and its critical endpoint as a function of quark mass and all chemical potentials agrees well with recent Monte-Carlo simulations. In the third part, we investigate the N ſ ∈ {1,2} effective theory with zero chemical potential up to O(κ⁴). We determine the location of the critical hopping parameter at which the first-order deconfinement phase transition terminates and changes to a crossover. Our results for the critical endpoint of the O(κ²) effective theory are in excellent agreement with the determinations from simulations of four-dimensional QCD with a hopping expanded determinant by the WHOT-QCD collaboration. For the O(κ⁴) effective theory, our estimate suggests that the critical quark mass increases as the order of κ-contributions increases. We also compare with full lattice QCD with N ſ = 2 degenerate standard Wilson fermions and thus obtain a measure for the validity of both the strong coupling and the hopping expansion in this regime.
In order to understand the origin of the elements in the universe, one must understand the nuclear reactions by which atomic nuclei are transformed. There are many different astrophysical environments that fulfill the conditions of different nucleosynthesis processes. Even though great progress has been made in recent decades in understanding the origin of the elements in the universe, some questions remain unanswered. In order to understand the processes, it is necessary to measure cross sections of the involved reactions and constrain theoretical model predictions. A variety of methods have been developed to measure nuclear reaction cross sections relevant for nuclear astrophysics. In this thesis, two different experiments and their results, both using the well-established activation method, are presented.
A measurement of the proton capture cross section on the p-nuclide 96Ru was performed at the Institute of Structure and Nuclear Astrophysics ISNAP - Notre Dame, USA. The main goal of this experiment was to compare the results with those obtained by Mei et al. in a pioneering experiment using the method of inverse kinematics at the GSI Helmholtzzentrum für Schwerionenforschung GmbH - Darmstadt, Germany. Therefore, the activations were taken out at the same center of mass energies of 9 MeV, 10 MeV and 11 MeV. Another activation was taken out at an energy of 3.2 MeV to compare the result to a measurement of Bork et al. who also used the activation method. While the results at 3.2 MeV agree quite well with those of Bork et al., the results at higher energies show significantly smaller cross sections than those measured by Mei et al.. Experimental details, the data analysis and sources of uncertainties are discussed.
The second part of this thesis describes a neutron capture cross section experiment. At the Institut für Kernphysik - Goethe Universtität Frankfurt an experimental setup allows to produce quasi maxwell-distributed neutron fields to measure maxwell-averaged cross sections (MACS) relevant for s-process nucleosynthesis. The setup was upgraded by a fast electric linear guide to transport samples from the activation to the detection site. The cyclic activation of the sample allows to increase the signal-to-noise ratio and to measure neutron captures that lead to nuclei with
half-lives on the order of seconds. In a first campaign, MACS of the reactions 51V(n,γ), 107,109Ag(n,γ) and 103Rh(n,γ) were measured. The new components of the setup aswell as the data analysis framework are described and the results of the measurements are discussed.
Die vorgelegte Dissertation behandelt den Einfluss homöostatischer Adaption auf die Informationsverarbeitung und Lenrprozesse in neuronalen Systemen. Der Begriff Homöostase bezeichnet die Fähigkeit eines dynamischen Systems, bestimmte interne Variablen durch Regelmechanismen in einem dynamischen Gleichgewicht zu halten. Ein klassisches Beispiel neuronaler Homöostase ist die dynamische Skalierung synaptischer Gewichte, wodurch die Aktivität bzw. Feuerrate einzelner Neuronen im zeitlichen Mittel konstant bleibt. Bei den von uns betrachteten Modellen handelt es sich um eine duale Form der neuronalen Homöostase. Das bedeutet, dass für jedes Neuron zwei interne Parameter an eine intrinsische Variable wie die bereits erwähnte mittlere Aktivität oder das Membranpotential gekoppelt werden. Eine Besonderheit dieser dualen Adaption ist die Tatsache, dass dadurch nicht nur das zeitliche Mittel einer dynamischen Variable, sondern auch die zeitliche Varianz, also die stärke der Fluktuation um den Mittelwert, kontrolliert werden kann. In dieser Arbeit werden zwei neuronale Systeme betrachtet, in der dieser Aspekt zum Tragen kommt.
Das erste behandelte System ist ein sogennantes Echo State Netzwerk, welches unter die Kategorie der rekurrenten Netzwerke fällt. Rekurrente neuronale Netzwerke haben im Allgemeinen die Eigenschaft, dass eine Population von Neuronen synaptische Verbindungen besitzt, die auf die Population selbst projizieren, also rückkoppeln. Rekurrente Netzwerke können somit als autonome (falls keinerlei zusätzliche externe synaptische Verbindungen existieren) oder nicht-autonome dynamische Systeme betrachtet werden, die durch die genannte Rückkopplung komplexe dynamische Eigenschaften besitzen. Abhängig von der Struktur der rekurrenten synaptischen Verbindungen kann beispielsweise Information aus externem Input über einen längeren Zeitraum gespeichert werden. Ebenso können dynamische Fixpunkte oder auch periodische bzw. chaotische Aktivitätsmuster entstehen. Diese dynamische Vielseitigkeit findet sich auch in den im Gehirn omnipräsenten rekurrenten Netzwerken und dient hier z.B. der Verarbeitung sensorischer Information oder der Ausführung von motorischen Bewegungsmustern. Das von uns betrachtete Echo State Netzwerk zeichnet sich dadurch aus, dass rekurrente synaptische Verbindungen zufällig generiert werden und keiner synaptischen Plastizität unterliegen. Verändert werden im Zuge eines Lernprozesses nur Verbindungen, die von diesem sogenannten dynamischen Reservoir auf Output-Neuronen projizieren. Trotz der Tatsache, dass dies den Lernvorgang stark vereinfacht, ist die Fähigkeit des Reservoirs zur Verarbeitung zeitabhängiger Inputs stark von der statistischen Verteilung abhängig, die für die Generierung der rekurrenten Verbindungen verwendet wird. Insbesondere die Varianz bzw. die Skalierung der Gewichte ist hierbei von großer Bedeutung. Ein Maß für diese Skalierung ist der Spektralradius der rekurrenten Gewichtsmatrix.
In vorangegangenen theoretischen Arbeiten wurde gezeigt, dass für das betrachtete System ein Spektralradius nahe unterhalb des kritischen Wertes von 1 zu einer guten Performance führt. Oberhalb dieses Wertes kommt es im autonomen Fall zu chaotischem dynamischen Verhalten, welches sich negativ auf die Informationsverarbeitung auswirkt. Der von uns eingeführte und als Flow Control bezeichnete duale Adaptionsmechanismus zielt nun darauf ab, über eine Skalierung der synaptischen Gewichte den Spektralradius auf den gewünschten Zielwert zu regulieren. Essentiell ist hierbei, dass die verwendete Adaptionsdynamik im Sinne der biologischen Plausibilität nur auf lokale Größen zurückgreift. Dies geschieht im Falle von Flow Control über eine Regulation der im Membranpotential der Zelle auftretenden Fluktuationen. Bei der Evaluierung der Effektivität von Flow Control zeigte sich, dass der Spektralradius sehr präzise kontrolliert werden kann, falls die Aktivitäten der Neuronen in der rekurrenten Population nur schwach korreliert sind. Korrelationen können beispielsweise durch einen zwischen den Neuronen stark synchronisierten externen Input induziert werden, der sich dementsprechend negativ auf die Präzision des Adaptionsmechanismus auswirkt.
Beim Testen des Netzwerks in einem Lernszenario wirkte sich dieser Effekt aber nicht negativ auf die Performance aus: Die optimale Performance wurde unabhängig von der stärke des korrelierten Inputs für einen Spektralradius erreicht, der leicht unter dem kritischen Wert von 1 lag. Dies führt uns zu der Schlussfolgerung, dass Flow Control unabhängig von der Stärke der externen Stimulation in der Lage ist, rekurrente Netze in einen für die Informationsverarbeitung optimalen Arbeitsbereich einzuregeln.
Bei dem zweiten betrachteten Modell handelt es sich um ein Neuronenmodell mit zwei Kompartimenten, welche der spezifischen Anatomie von Pyramidenneuronen im Kortex nachempfunden ist. Während ein basales Kompartiment synaptischen Input zusammenfasst, der in Dendriten nahe des Zellkerns auftritt, repräsentiert das zweite apikale Kompartiment die im Kortex anzutreffende komplexe dendritische Baumstruktur. In früheren Experimenten konnte gezeigt werden, dass eine zeitlich korrelierte Stimulation sowohl im basalen als auch apikalen Kompartiment eine deutlich höhere neuronale Aktivität hervorrufen kann als durch Stimulation nur einer der beiden Kompartimente möglich ist. In unserem Modell können wir zeigen, dass dieser Effekt der Koinzidenz-Detektion es erlaubt, den Input im apikalen Kompartiment als Lernsignal für synaptische Plastizität im basalen Kompartiment zu nutzen. Duale Homöostase kommt auch hier zum Tragen, da diese in beiden Kompartimenten sicherstellt, dass sich der synaptische Input hinsichtlich des zeitlichen Mittels und der Varianz in einem für den Lernprozess benötigten Bereich befindet. Anhand eines Lernszenarios, das aus einer linearen binären Klassifikation besteht, können wir zeigen, dass sich das beschriebene Framework für biologisch plausibles überwachtes Lernen eignet.
Die beiden betrachteten Modelle zeigen beispielhaft die Relevanz dualer Homöostase im Hinblick auf zwei Aspekte. Das ist zum einen die Regulation rekurrenter neuronaler Netze in einen dynamischen Zustand, der für Informationsverarbeitung optimal ist. Der Effekt der Adaption zeigt sich hier also im Verhalten des Netzwerks als Ganzes. Zum anderen kann duale Homöostase, wie im zweiten Modell gezeigt, auch für Plastizitäts- und Lernprozesse auf der Ebene einzelner Neuronen von Bedeutung sein. Während neuronale Homöostase im klassischen Sinn darauf beschränkt ist, Teile des Systems möglichst präzise auf einen gewünschten Mittelwert zu regulieren, konnten wir Anhand der diskutierten Modelle also darlegen, dass eine Kontrolle des Ausmaßes von Fluktuationen ebenfalls Einfluss auf die Funktionalität neuronaler Systeme haben kann.
This thesis has two main parts.
The first part is based on our publication [1], where we use perturbation theory to calculate decay rates of magnons in the Kitaev-Heisenberg-Γ (KHΓ) model. This model describes the magnetic properties of the material α-RuCl 3 , which is a candidate for a Kitaev spin liquid. Our motivation is to validate a previous calculation from Ref. [2]. In this thesis, we map out the classical phase diagram of the KHΓ model. We use the Holstein-Primakoff
transformation and the 1/S expansion to describe the low temperature dynamics of the Kitaev-Heisenberg-Γ model in the experimentally relevant zigzag phase by spin waves. By parametrizing the spin waves in terms of hermitian fields, we find a special parameter region within the KHΓ model where the analytical expressions simplify. This enables us to construct the Bogoliubov transformation analytically. For a representative point in the special parameter region, we use these results to numerically calculate the magnon damping, which is to leading order caused by the decay of single magnons into two. We also calculate the dynamical structure factor of the magnons.
The second part of this thesis is based on our publication [3], where we use the functional renormalization group to analyze a discontinuous quantum phase transition towards a non-Fermi liquid phase in the Sachdev-Ye-Kitaev (SYK) model. In this thesis, we perform a disorder average over the random interactions in the SYK model. We argue that in the thermodynamic limit, the average renormalization group (RG) flow of the SYK model is identical to the RG flow of an effective disorder averaged model. Using the functional RG, we find a fixed point describing the discontinuous phase transition to the non-Fermi liquid phase at zero temperature. Surprisingly, we find a finite anomalous dimension of the fermions, which indicates critical fluctuations and is unusual for a discontinuous transition. We also determine the RG flow at zero temperature, and relate it to the phase diagram known from the literature.
In this thesis, the emission of protons as well as the production of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are analyzed multi-differentially as a function of transverse momentum, rapidity and centrality. Therefore, the 3.03 billion 30 % most central Ag(1.58A GeV)+Ag events recorded by HADES are used. Furthermore, the lifetimes of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are measured. The obtained 3ΛH lifetime of (253 ± 24 ± 42) ps is compatible with the lifetime of free Λ hyperons, as predicted by theoretic calculations due to its low binding energy. Finally, also the double strange Ξ– hyperons are reconstructed. Unfortunately, the fully optimized signals lie below the confidence threshold of 5σ, which is why both an production rate and an upper production limit are estimated using averaged acceptance and efficiency corrections. Never before, 3ΛH or Ξ– were successfully reconstructed and analyzed in heavy-ion collisions at such low energies. The obtained results are compared to previous measurements and put in context with world data form different energies and collision systems.
Simulations of conformational changes and enzyme-substrate interactions in protein drug targets
(2022)
Finding new drugs is a difficult, time-consuming, and costly challenge, with only a small success rate along the drug discovery pipeline of far less than 10%. The high failure rate of drug discovery projects motivates the integration of computational tools throughout the whole drug discovery pipeline, from target identification to clinical trials. Target identification is the first step in the process. A biological target, e.g., a protein that plays a role in disease, is identified and its molecular mechanism in the disease is studied. Further, a potential binding site on the target, where therapeutic molecules can bind and modulate the target’s activity, needs to be characterized. Computational tools can contribute to improving the initial molecular target elucidation and assessment.
In this thesis, I use computational, physics-based approaches to characterize binding sites of drug targets and to decipher enzyme-substrate interactions, which play a role in disease mechanisms. Molecular dynamics (MD) simulations were applied to study the dynamics of molecules in solution at high temporal and spatial resolution. The method generates time-resolved trajectories of the particles in a system of interest by integrating Newton’s equations of motion numerically, starting from a set of coordinates and velocities. In MD simulations, all atoms of a chosen system, including solvent, are represented explicitly. Atomistic simulations are especially well-suited to study detailed interactions that depend on intermolecular interactions, such as hydration effects, hydrogen bonding, hydrophobic interactions, or subtle chemical differences. System properties are inferred from the trajectories, provided that the force fields, describing the interactions between the particles in the system, have a high accuracy. The bonded and non-bonded interactions are parametrized on experimental and quantum chemical data. The purpose of MD simulations can be to gain insight into the behavior of complex biological systems at molecular level, which often cannot be observed in experiments at the same resolution. With recent advances in computer hardware and simulation software, molecular systems of increasing size and simulation length can be investigated.
In the first part of the thesis, I investigated the conformational ensemble of various protein drug targets. Proteins are dynamic biomacromolecules that can have diverse and nearly isoenergetic conformational states. Ligand binding can shift the equilibrium of this conformational ensemble and can uncover binding sites, called cryptic sites. Cryptic sites only emerge upon small molecule binding and are often flat and featureless, and thus not easily recognized in crystal structures without bound ligands. If new binding sites including cryptic sites are detected, they can potentially be exploited for binding to ligands and enable a druggable target. Druggability is the ability of a protein to bind small, drug-like molecules, which is the basis for rational drug design. In this thesis, I used state-of-the-art physics-based, computational approaches to investigate the conformational ensembles of binding sites. In all studied systems, it is known from experiment that a specific group of ligands can induce conformational changes. The aim is to sample the conformational space made accessible upon ligand binding, yet without using the specific ligand structures or details about their interactions. We are interested in sampling the
pocket conformational states and identifying the respective pocket opening mechanism. For some cases, I additionally assessed whether the observed flexibility is a feature of the protein family, or specific to the protein under consideration.
The first studied system is factor VIIa (FVIIa). FVIIa is an essential part of the coagulation cascade and hence a potential drug target for thrombotic diseases. In addition, I investigated various other trypsin-like serine proteases from the same protein family. The binding pocket of trypsin-like serine proteases is called S1 pocket. An X-ray crystal structure solved by our collaborators reveals that a b-sheet structure in the S1 pocket is distorted by a bound ligand. I resolved the conformational change with MD simulations, starting from the unbound protein structure solvated in water and ions. I observed multiple spontaneous transition events. In 7 out of 22 simulations with the b-sheet as starting structure, the S1 pocket eventually rearranged into a distorted loop structure. These transitions occurred spontaneously and were mediated by water molecules probing the backbone hydrogen bonds. The conformational change studied here controls the onset of substrate binding and catalysis. Furthermore, I used metadynamics simulation, an enhanced-sampling method, to estimate the free energy barrier of this conformational change..
Die vorliegende Arbeit befasst sich mit der Untersuchung der Transporteigenschaften inklusive Ladungsträgerdynamik von quasi-zweidimensionalen organischen Ladungstransfersalzen. Diese Materialien besitzen eine Schichtstruktur und weisen eine hohe Anisotropie der elektrischen Leitfähigkeit auf. Aufgrund der geringen Bandbreite und der niedrigen Ladungsträgerkonzentration gehören die Materialien zu den stark-korrelierten Elektronensystemen, wobei sich die elektronischen Eigenschaften leicht durch chemische Modifikationen oder äußere Parameter beeinflussen lassen. Die starken Korrelationen resultieren in Metall-Isolator-Übergängen, die sich beim Mott-isolierenden Zustand in einer homogenen Verteilung und beim ladungsgeordneten Zustand in einer periodischen Anordnung der lokalisierten Ladungsträger manifestieren.
Mithilfe der Fluktuationsspektroskopie, die sich mit der Analyse der zeitabhängigen Widerstandsfluktuationen befasst, konnten im Rahmen dieser Arbeit neue Erkenntnisse über die Ladungsträgerdynamik in den verschiedenen elektronischen Zuständen gewonnen werden. Die Metall-Isolator-Übergänge in den untersuchten Systemen, die auf den Molekülen BEDT-TTF (kurz: ET) bzw. BEDT-TSF (kurz: BETS) basieren, sind von der Stärke der strukturellen Dimerisierung abhängig und wurden durch die Kühlrate, eine Zugbelastung sowie durch die Ausnutzung des Feldeffekts beeinflusst.
In den Systemen κ-(BETS)₂Mn[N(CN)₂]₃, κ-(ET)₂Hg(SCN)₂Cl und κ-(ET)₂Cu[N(CN)₂]Br sind die Donormoleküle als Dimere angeordnet, sodass aufgrund der effektiv halben Bandfüllung bei genügender Korrelationsstärke häufig ein Mott-Übergang auftritt. In κ-(ET)₂Hg(SCN)₂Cl führt eine schwächere Dimerisierung jedoch zu einem Ladungsordnungsübergang, der mit elektronischer Ferroelektrizität einhergeht. Dabei wird die polare Ordnung durch eine Ladungsdisproportionierung innerhalb der Dimere verursacht. Die Widerstandsfluktuationen zeigen am ferroelektrischen Übergang einen starken Anstieg der spektralen Leistungsdichte, eine Abhängigkeit vom angelegten elektrischen Feld sowie Zeitabhängigkeiten, die auf räumliche Korrelationen der fluktuierenden Prozesse hindeuten. Diese Eigenschaften wurden ebenfalls für das System κ-(BETS)₂Mn[N(CN)₂]₃ beobachtet. Hierbei wurden mithilfe der dielektrischen Spektroskopie ebenfalls Hinweise auf Ferroelektrizität gefunden, während durch die Analyse der stromabhängigen Widerstandsfluktuationen die Größe der polaren Regionen abgeschätzt werden konnte. Das System κ-(ET)₂Cu[N(CN)₂]Br, das in einer Feldeffekttransistor-Struktur vorliegt, erlaubt neben der Untersuchung des Bandbreiten-getriebenen Mott-Übergangs durch die Zugbelastung eines Substrats auch die Beeinflussung der elektronischen Eigenschaften durch die Änderung der Bandfüllung mittels elektrostatischer Dotierung. Hierbei wurden starke Abhängigkeiten des Widerstands von der Gatespannung beobachtet und Ähnlichkeiten der Ladungsträgerdynamik zu herkömmlichen Volumenproben gefunden.
Bei den Systemen θ-(ET)₂MM'(SCN)₄ mit MM'=CsCo, RbZn, TlZn tritt ein Ladungsordnungsübergang auf, der eine starke Abhängigkeit von der Kühlrate zeigt. Durch schnelles Abkühlen lässt sich der Phasenübergang erster Ordnung kinetisch vermeiden, wodurch ein Ladungsglaszustand realisiert wird. Dieser metastabile Zustand zeigt neuartige physikalische Eigenschaften mit Ähnlichkeiten zu herkömmlichen Gläsern und wurde als Folge der geometrischen Frustration der Ladung auf einem Dreiecksgitter diskutiert. Im Rahmen dieser Arbeit konnte die Ladungsträgerdynamik in den verschiedenen Ladungszuständen von unterschiedlich frustrierten Systemen verglichen werden. Zur Realisierung sehr schneller Abkühlraten wurde dafür eine Heizpulsmethode verwendet und weiterentwickelt. Der Ladungsglaszustand zeigte dabei für verschiedene Systeme ein deutlich niedrigeres Rauschniveau als der ladungsgeordnete Zustand. In Kombination mit Messungen der thermischen Ausdehnung und kühlratenabhängiger Transportmessungen wurde in den Systemen mit der stärksten Frustration die Existenz eines strukturellen Glasübergangs nachgewiesen, der von einer starken Verlangsamung der Ladungsträgerdynamik begleitet wird. Diese Erkenntnisse werfen ein neues Licht auf die bisherige rein elektronische Interpretation des Ladungsglaszustands und heben den Einfluss der strukturellen Freiheitsgrade hervor.
In der vorliegenden Arbeit wurde die Ionisation von Atomen und Molekülen in starken Laserfeldern experimentell untersucht. Hierbei kam die COLTRIMS-Technik zur koinzidenten Messung der Impulse aller aus einem Ionisationsereignis stammender Ionen und Elektronen zum Einsatz. Unter Mitwirkung des Autors wurde ein COLTRIMS-Reaktionsmikroskop umgebaut und mit einem neuen Spektrometer sowie einer atomaren Wasserstoffquelle ausgestattet. Des Weiteren entstand ein interferometrischer Aufbau zur Erzeugung von Zwei-Farben-Feldern. Aus jedem der vorgestellten Experimente konnten Informationen über die elektronische Wellenfunktion an der Grenze zum klassisch verbotenen Bereich gewonnen werden. Dies geschah sowohl im Hinblick auf die Amplitude, als auch auf die Phase der Wellenfunktion. Mit dem Wasserstoffatom (Kapitel 9), dem Wasserstoffmolekül (Kapitel 10) und dem Argondimer (Kapitel 11) wurden drei Systeme unterschiedlicher Komplexität gewählt.
Die Entstehung der Elemente im Universum wird auf eine Vielzahl von Prozessen zurückgeführt, die sowohl in Urknall - als auch in stellaren Szenarien angesiedelt werden. Die Kenntnis der dort ablaufenden Reaktionen und deren Raten ermöglicht es die zugrundeliegenden Modelle einzugrenzen und somit genauere Aussagen über die Plausibilität der Szenarien zu treffen. Ein Teil dieser Prozesse stützt sich auf Neutroneneinfänge an Atomkernen, wodurch die Massezahl des Ausgangskerns erhöht wird.
Die Aktivierungsmethode ermöglicht die Bestimmung der Wahrscheinlichkeit eines Neutroneneinfangs, sofern der Zielkern eine detektierbare Radioaktivität aufweist. Die experimentelle Untersuchung einer Reaktion mit einem kurzlebigen Produktkern ist eine besondere Herausforderung, da bei langen Aktivierungen zwar viele Einfänge stattfinden, die meisten Produktkerne jedoch schon während der Aktivierung zerfallen. Ein probates Mittel um genügend Zerfälle des Produktkerns beobachten zu können ist die zyklische Aktivierung, wobei die Probe in mehrfachen Wiederholungen kurz bestrahlt und ausgezählt wird.
Im Rahmen dieser Arbeit wurden zwei verschiedene Anwendungen der zyklischen Aktivierung behandelt.
Eine vom Paul Scherrer Institut Villigen bereitgestellte Probe von 10Be wurde am TRIGA Reaktor der Johannes Gutenberg - Universität Mainz mit Neutronen aktiviert. Über die Cadmiumdifferenzmethode konnte der thermische und der epithermische Anteil der Neutronen separiert werden und dadurch sowohl der thermische Wirkungsquerschnitt als auch das Resonanzintegral für die Reaktion 10Be(n,γ)11Be bestimmt werden.
Am Institut für Kernphysik der Goethe Universität Frankfurt wurde mit einem Van - de - Graaff - Beschleuniger über die 7Li(p,n)7Be Reaktion ein quasistellares Neutronenspektrum mit kBT ≈ 25 keV erzeugt. Für die zyklische Aktivierung von Proben wurde die Infrastruktur in Form einer automatisiert ablaufenden Vorrichtung zur Bestrahlung und Auszählung geplant und umgesetzt. In diesem Rahmen wurden die über das Spektrum gemittelten Neutroneneinfangsquerschnitte für verschiedene Reaktionen bestimmt. Für 19F(n,γ)20F konnte der Gesamteinfangsquerschnitt bestimmt werden. Für die Reaktion 45Sc(n,γ)46Sc wurde der partielle Wirkungsquerschnitt in den 142,5 keV Isomerzustand gemessen. Aus der 115In(n,γ)116In Reaktion konnten die partiellen Querschnitte in die Isomerzustände bei 289,7 keV, 127,3 keV sowie den Grundzustand bestimmt werden.
Außerdem wurde mit einer Hafniumprobe die partiellen Einfangsquerschnitte in den 1147,4 keV Isomerzustand von 178Hf und in den 375 keV Isomerzustand von 179Hf gemessen.
The aim of this thesis is to provide a complete and consistent derivation of second-order dissipative relativistic spin hydrodynamics from quantum field theory. We will proceed in two main steps. The first one is the formulation of spin kinetic theory from quantum field theory using the Wigner-function formalism and performing an expansion in powers of the Planck constant. The essential ingredient here is the nonlocal collision term. We will find that the nonlocality of the collision term arises at first order in the Planck constant and is responsible for the spin alignment with vorticity, as it allows for conversion between spin and orbital angular momentum.
In the second step, this kinetic theory is used as the starting point to derive hydrodynamics including spin degrees of freedom. The so-called canonical form of the conserved currents follows from Noether’s theorem.
Applying an HW pseudo-gauge transformation, we obtain a spin tensor and energy-momentum tensor with obvious physical interpretation. Promoting all components of the HW tensors to be dynamical, we derive
second-order dissipative spin hydrodynamics. The additional equations of motion for the dissipative currents are obtained from kinetic theory generalizing the method of moments to include spin degrees of freedom.
This Ph. D. thesis with the title "Characterisation of laser-driven radiation beams: Gamma-ray dosimetry and Monte Carlo simulations of optimised target geometry for record-breaking efficiency of MeV gamma-sources" is dedicated to the study of the acceleration of electrons by intense sub-picosecond laser pulses propagating in a sub-millimeter plasma with near-critical electron density (NCD) and resulting generation of the gamma bremsstrahlung and positrons in the targets of different materials and thickness.
Laser-driven particle acceleration is an area of increasing scientific interest since the recent development of short pulse, high-intensity laser systems. The interaction of intense high-energy, short-pulse lasers with solid targets leads to the production of high-energy electrons in the relativistic laser intensity regime of more than 1018 W /cm2. These electrons play the leading role in the first stage of the interaction of laser with matter, which leads to the creation of laser sources of particles and radiation. Therefore, the optimisation of the electron beam parameters in the direction of increasing the effective temperature and beam charge, together with a slight divergence, plays a decisive role, especially for further detection and characterisation of laser-driven photon and positron beams.
In the context of this work, experiments were carried out at the PHELIX laser system (Petawatt High-Energy Laser for Heavy Ion eXperiments) at GSI Helmholtz Center for Heavy-Ion Research GmbH in Darmstadt, Germany. This thesis presents a thermoluminescence dosimetry (TLD) based method for the measurement of bremsstrahlung spectra in the energy range from 30 keV to 100 MeV. The results of the TLD measurements reinforced the observed tendency towards the strong increase of the mean electron energy and number of super-ponderomotive electrons. In the case of laser interaction with long-scale NCD-plasmas, the dose caused by the gamma-radiation measured in the direction of the laser pulse propagation showed a 1000-fold increase compared to the high contrast shots onto plane foils and doses measured perpendicular to the laser propagation direction for all used combinations of targets and laser parameters.
In this thesis I present novel characterisation method using a combination of TLD measurements and Monte Carlo FLUKA simulations applicable to laser-driven beams. The thermoluminescence detector-based spectrometry method for simultaneous detection of electrons and photons from relativistic laser-induced plasmas initially developed by Behrens et al. (Behrens et al., 2003) and further applied in experiments at PHELIX laser (Horst et al., 2015) delivered good spectral information from keV energies up to some MeV, but as it was presented in (Horst et al., 2015) this method was not really suitable to resolve the content of photon spectra above 10 MeV because of the dominant presence of electrons. Therefore, I created new evaluation method of the incident electron spectra from the readings of TLDs. For this purpose, by means of MatLab programming language an unfolding algorithm was written. It was based on a sequential enumeration of matching data series of the dose values measured by the dosimeters and calculated with of FLUKA-simulations. The significant advantage of this method is the ability to obtain the spectrum of incident electrons in the low energy range from 1 keV, which is very difficult to measure reliably using traditional electron spectrometers.
The results of the evaluation of the effective temperature of super-ponderomotive electrons retrieved from the measured TLD-doses by means of the Monte-Carlo simulations demonstrated, that application of low density polymer foam layers irradiated by the relativistic sub-ps laser pulse provided a strong increase of the electron effective temperature from 1.5 - 2 MeV in the case of the relativistic laser interaction with a metallic foil up to 13 MeV for the laser shots onto the pre-ionized foam and more than 10 times higher charge carried by relativistic electrons.
The progressive simulation method of whole electron spectra described with two -temperatures Maxwellian distribution function has been developed and the results of dose simulations were compared with the acquired experimental data. The advanced feature of this method, which distinguishes it from the results of the simulation of the photon spectrum using the interaction with the target of mono-energetic electron beams (Nilgün Demir, 2013; Nilgün Demir, 2019) or the initial electron spectrum expressed as a function of one electron temperature (Fiorini, 2012), is the ability to simulate the initial electron spectrum described by the Maxwellian distribution function with two temperatures.
The important objective of this thesis was dedicated to the study and characterisation of laser-driven photon beams. In addition to this, the positron beams were evaluated. The investigation of bremsstrahlung photons and positrons spectra from high Z targets by varying the target thickness from 10 µm to 4 mm in simulated models of the interactions of electron spectra with Maxwellian distribution functions allowed to define an optimal thickness when the fluences of photons and positrons are maximal. Furthermore based on the results of FLUKA simulations the gold material was found to be the most suitable for the future experiments as e − γ target because of its highest bremsstrahlung yield.
Additionally Monte Carlo simulations were performed applying the obtained electron beam parameters from the electron acceleration process in laser-plasma interactions simulated with particle-in-cell (PIC) code for two laser energies of 20 J and 200 J. The corresponding electron spectra were imported into a Monte Carlo code FLUKA to simulate the production process of bremsstrahlung photons and positrons in Au converter. FLUKA simulations showed the record conversion of efficiency in MeV gammas can reach 10%, which reinforces the generation of positrons. The obtained results demonstrate the advantages of long-scale plasmas of near critical density (NCD) to increase the parameters of MeV particles and photon beams generated in relativistic laser-plasma interaction. The efficiency of the laser-driven generation of MeV electrons and photons by application of low-density polymer foams is essentially enhanced.