Universitätspublikationen
Refine
Year of publication
Document Type
- Doctoral Thesis (380) (remove)
Has Fulltext
- yes (380) (remove)
Is part of the Bibliography
- no (380) (remove)
Keywords
- HADES (4)
- Beschleuniger (3)
- CBM (3)
- FAIR (3)
- Heavy Ion Collisions (3)
- Monte-Carlo-Simulation (3)
- QCD (3)
- Quark-Gluon-Plasma (3)
- Schwerionenphysik (3)
- Teilchenbeschleuniger (3)
Institute
- Physik (380) (remove)
In den letzten Jahren haben die Forschungsaktivitäten im Bereich Thermoelektrik stetig zugenommen. Das neu erweckte Interesse an der Thermoelektrik ist zurückzuführen auf neue nanostrukturierte Materialien, Quantenschicht-Strukturen und Nanodrähte, welche
eine wesentliche Steigerung der thermoelektrischen Effektivität Z im Vergleich zum Massivmaterial versprechen. Für Nanodrähte ist die größte Steigerung der thermoelektrischen Effektivität zu erwarten. Zur Bestätigung der Theorie bedarf es neuer Messmethoden zur Bestimmung des Seebeck-Koeffizienten S, der elektrischen Leitfähigkeit σ und der Wärmeleitfähigkeit λ, um hieraus eine Steigerung der thermoelektrischen Effektivität Z = (Sexp2)σ/λ experimentell zu bestätigen.
Der Schwerpunkt der Doktorarbeit lag in der Untersuchung thermoelektrischer Eigenschaften von Nanodrähten. Hierzu wurden neueMessmethoden zur Bestimmung der elektrischen und thermischen Leitfähigkeit von Nanodrähten entwickelt.
Die elektrische und thermische Leitfähigkeit von Pt-Nanodrähten wurden mit dem in dieser Arbeit entwickelten λ-Chip gemessen. Die elektrische Leitfähigkeit der Pt-Nanodrähte ist im Vergleich zum Massivmaterial entsprechend der klassischen Size-Effekt-Theorie reduziert. Ebenso wurde eine Abnahme der Wärmeleitfähigkeit beobachtet. Die Ergebnisse stimmen mit den im Rahmen der klassischen Size-Effekt-Theorie zu erwartenden Resultaten gut überein, jedoch bedarf die Reduzierung der Lorenz-Zahl noch einer theoretischen Erklärung.
Im Weiteren wurde die elektrische Leitfähigkeit von BixTe1-x und BixSb1-x-Nanodrähten mit dem λ-Chip bestimmt. Hierzu wurden zunächst unterschiedliche Kontaktmaterialien getestet, um die Diffusion des Kontaktmaterials in den Nanodraht auszuschließen. Als bewährtes Kontaktmaterial stellte sich ein Schichtsystem aus Titan und Gold heraus. Die Ti-Schicht wirkt hierbei als Diffusionsbarriere und Haftvermittler-Schicht. Die Wärmeleitfähigkeit der Bi-haltigen Nanodrähte konnte mit dem λ-Chip nicht gemessen werden, da die Unterätzung der Nanodrähte mittels reaktivem Ionenätzen die Nanodrähte angriff. Als Alternative können die Nanodrähte auf dem λ-Chip mit einem fokusierten Ionenstrahl unterätzt werden. Der Aufwand hierzu ist jedoch relativ hoch und diese Alternative wurde deshalb nicht weiter verfolgt. Als weitere Alternative wurde der Z-Chip entwickelt. Hierbei werden die Nanodrähte auf den fertigen Chip aufgebracht und mittels Elektronenstrahl-induzierter Deposition an den elektrischen Kontakten fixiert. Der Chip ermöglicht die Messung der elektrische Leitfähigkeit in 4-Punkt-Anordnung, der Wärmeleitfähigkeit und des Seebeck-Koeffizienten an
einem einzelnen Nanodraht. Somit ist die Bestimmung der thermoelektrischen Effektivität an einem Nanodraht möglich. DesWeiteren wurden die theoretischen Grundlagen zur Bestimmung der Wärmekapazität an einzelnen Nanodrähten mit dem Z-Chip präsentiert. Zum Zeitpunkt der Durchführung dieser Arbeit fehlte jedoch das notwendige Equipment zur Ausführung der Wärmekapazitätsmessung an einzelnen Nanodrähten.
Des Weiteren wurde die Cross-Plane Methode zur Bestimmung der Wärmeleitfähigkeit an eingebetteten Nanodrähten entwickelt. Analog der Messmethode, welche für die Einzeldrahtmessungen verwendet wird, handelt es sich hierbei um eine stationäre „Joule-Heating“ Methode. Die Temperaturdifferenz wird aus der Widerstandsänderung einer auf die eingebetteten Nanodrähte aufgebrachten Heizschicht bestimmt.Mit derMethode wurde die Wärmeleitfähigkeit von BixTe1-x-Nanodrähten ermittelt.
Die elektrische Leitfähigkeit wurde von BixTe1-x-Nanodrähten unterschiedlicher Zusammensetzung und Herstellungsparameter mit dem λ- und dem Z-Chip bestimmt. Die gemessenen Nanodrähte zeigen sowohl intrinsisches wie extrinsisches Leitungsverhalten verbunden mit einer, im Vergleich zum Volumenmaterial, reduzierten Temperaturabhängigkeit der elektrischen Leitfähigkeit infolge von Oberflächen- und Korngrenzenstreuung der Ladungsträger. Die elektrischen Leitfähigkeitsmessungen stimmen mit Beobachtungen anderer Gruppen gut überein.
Die Wärmeleitfähigkeit konnte an einem einzelnen BixTe1-x-Nanodraht und an eingebetteten BixTe1-x-Nanodrähten gemessen werden. Die Wärmeleitfähigkeit ist gegenüber dem Massivmaterial reduziert. Die Ergebnisse sind in guter Übereinstimmung mit bisher publizierten Ergebnissen von Bismuttellurid-Nanodrähten.
In der modernen Festkörperphysik spielen elektronisch stark korrelierte Systeme mit ihrem komplexen Vielteilchenverhalten eine zentrale Rolle. Insbesondere das Wechselspiel zwischen thermischen und Quantenfluktuationen in den Ladungs- und Spinfreiheitsgraden führt zur Entstehung verschiedenster neuartiger Grundzustände.
Die vorliegende Dissertation „Ultrasonic and Magnetic Investigations in frustrated Lowdimensional Spin Systems“ beschäftigt sich mit den besonderen physikalischen Eigenschaften niedrig dimensionaler Spinsysteme. Diese Materialklasse, die auch zu den stark korrelierten Systemen zählt, wird seit vielen Jahren intensiv sowohl experimentell als auch theoretisch untersucht. Auf theoretischer Seite sind die niedrigdimensionalen Spinsysteme besonders interessant, da sie als Modellsysteme die exakte Beschreibung des Grundzustandes und des Anregungsspektrums ermöglichen. Von experimenteller Seite ist es in den letzten Jahrzehnten gelungen, verschiedenste Materialklassen niedrigdimensionaler Spinsysteme zu synthetisieren.
In der vorliegenden Arbeit werden die grundlegenden Theorien und physikalischen Konzepte niedrigdimensionaler Spinsysteme diskutiert. Insbesondere auch die Spin-Phonon-Wechselwirkung dieser Materialien, die für die hier beobachteten elastischen Anomalien verantwortlich ist. Weiterhin wird auch das elastische Verhalten bei magnetischen Phasenübergängen beschrieben.
Da die Ultraschallexperimente einen Schwerpunkt dieser Arbeit bilden, wird der Versuchsaufbau zur phasenempfindlichen Detektion von Schallgeschwindigkeit und Ultraschalldämfung ausführlich beschrieben. Diese Messmethode ist ideal zur Untersuchung der Spin-Phonon Wechselwirkung geeignet.
In this thesis, we have investigated strongly correlated bosonic gases in an optical lattice, mostly based on a bosonic version of dynamical mean field theory and its real-space extension. Emphasis is put on possible novel quantum phenomena of these many-body systems and their corresponding underlying physics, including quantum magnetism, pair-superfluidity, thermodynamics, many-body cooling, new quantum phases in the presence of long-range interactions, and excitational properties. Our motivation is to simulate manybody phenomena relevant to strongly correlated materials with ultracold lattice gases, which provide an excellent playground for investigating quantum systems with an unprecedented level of precision and controllability. Due to their high controllability, ultracold gases can be regarded as a quantum simulator of many-body systems in solid-state physics, high energy astrophysics, and quantum optics. In this thesis, specifically, we have explored possible novel quantum phases, thermodynamic properties, many-body cooling schemes, and the spectroscopy of strongly correlated many-body quantum systems. The results presented in this thesis provide theoretical benchmarks for exploring quantum magnetism in upcoming experiments, and an important step towards studying quantum phenomena of ultracold gases in the presence of long-range interactions.
This thesis has light mesons and their vacuum interactions as its topic. In particular, the work examines the question where the scalar antiquark-quark states are found in the physical spectrum -- in the energy region below or above 1 GeV. Contrary to the naive expectation, the mentioned states are found in the region above 1 GeV. This has consequences for the building of order parameters for the chiral symmetry breaking of Quantum Chromodynamics (QCD).
Towards a THz Bloch laser
(2011)
The realisation of tunable THz laser sources working at room temperature would give
rise to further applications in this range of the electromagnetic spectrum. The THz
Bloch laser could therefore become the basis for a technological breakthrough. Beside
this practical relevance, the physics of the gain mechanism has been investigated
theoretically for a long time and the experimental implementation of a self-starting
laser still has not been achieved.
At the beginning of this thesis the basic principles of Bloch oscillations and the
related Bloch gain are described. The need of a superlattice structure to make Bloch
oscillations possible in a semiconductor material is discussed. In this context, the effect
of negative differential resistance and its influence on the field distribution due to Gunn
domains is explained. The latter lead to an inhomogeneous field which may suppress
the Bloch gain mechanism. The Krömer criterion is introduced and the concept of
field-pinning layers to improve the field homogeneity is deduced. Finally, the design of
the laser material is shown and different types of laser waveguides are compared.
In chapter 3 detailed recipes for the processing of samples are given. Different types of
contacts (ohmic and Schottky), the wafer bonding process required for double-metal
lasers and the application of different photoresists for different purposes are described.
An explanation of the formation of waveguides due to dry etching, wet etching
and ion implantation follows. Dry etching is an established technique in the field
of microstructure processing but the challenge of etching about 20 μm has led to
problems. The high etching depth also makes wet etching difficult but this method
could be improved due to a hard bake of the photoresist. The protection of critical
areas on the surface of the samples with photoresist during ion implantation was
increased by optimising the spin coating process. However, a full implantation of the
active layer between the waveguides was not achieved which was the reason for the
development of the hybrid technology. Here a prior wet etching of about 10 μm is
performed and the rest of the material is implanted.
The experimental setup is shown in chapter 4. An alternative method for the electrical
contacting with the help of a copper bar is introduced. This improves the current
distribution and the risk of an electrical breakdown during the measurements could
therefore be lowered. Devices for THz beam guidance and spectroscopic measurements
are shown and the method of biasing the samples with pulses below 100 ns and
determining the effective voltage applied to the sample is depicted. These short pulses
are required to prevent the samples heating up drastically due to high power.
Chapter 5 contains the current-voltage characterisation of several structures including
I-V-samples, Bloch laser samples and a quantum cascade laser. Different contacts
(ohmic and Schottky) and different techniques for the formation of the ridges have
been used in the processing of these samples (performed at the University of Frankfurt
in all cases) and their influence on the I-V-dependence is discussed. The properties of
the THz emission of the quantum cascade laser are in good agreement with published
results from lasers processed with the same material. Another important result of
this chapter is that the Bloch laser samples show unstable behaviour compared to the
quantum cascade structure even with short pulses (of about 10 ns) where the risk of an
electrical breakdown or the building of filaments is low. THz radiation emitted from
one of the Bloch laser samples could not be observed.
Two aspects that may have prevented the Bloch laser to emit are discussed in
chapter 6. The saturation of the gain for higher amplitudes of the THz wave is
investigated in single mode and multiple mode operation (the latter could occur due
to the Bloch gain being expected to be broadband). In both cases it is shown that
the saturation effect would limit the output power only to values clearly above the
detection limit. In the subsequent section the distribution of the electric field is
simulated with SILVACO software. Structures with transit layer lengths above the
Krömer criterion are compared with structures which include field-pinning layers. It is
shown that the latter are useful to avoid propagating Gunn domains as they build up
in similar structures without field-pinning layers. Nevertheless, the electric field inside
the superlattice regions is not stable. Beside spatial inhomogeneities also temporal
variations of the field magnitude are observed. The lack of a suitable field distribution
is expected to be the main reason for the samples not to work.
The subject of this thesis aimed at a better understanding of the spectacular X-ray burst. The most likely astrophysical site is a very dense neutron star, which accretes H/He-rich matter from a close companion. While falling towards the neutron star, the matter is heated up and a thermonuclear runaway is ignited. The exact description of this process is dominated by the properties of a few proton-rich radioactive isotopes, which have a low interaction probability, hence a high abundance.
The topic of this thesis was therefore an investigation of the short-lived, proton-rich isotopes 31Cl and 32Ar. The Coulomb dissociation method is the modern technique of choice. Excitations with energies up to 20 MeV can be induced by the Lorentz contracted Coulomb field of a lead target. At the GSI Helmholtzzentrum für Schwerionenforschung GmbH in Darmstadt, Germany, a Ar beam was accelerated to an energy of 825 AMeV and fragmented in a beryllium target. The fragment separator was used to select the desired isotopes with a remaining energy of 650 AMeV. They were subsequently directed onto a 208 Pb target in the ALAND/LAND setup. The measurement was performed in inverse kinematics. All reaction products were detected and inclusive and exclusive measurements of the respective Coulomb dissociation cross sections were possible.
During the analysis of the experiment, it was possible to extract the energy-differential excitation spectrum of 31Cl, and to constrain astrophysically important parameters for the time-reversed 30S(p,γ)31Cl reaction. A single resonance at 0.443(37) MeV dominates the stellar reaction rate, which was also deduced and compared to previous calculations.
The integrated Coulomb dissociation cross section of this resonance was determined to 15(6) mb. The astrophysically important one- and two-proton emission channels were analyzed for 32Ar and energy-differential excitation spectra could be derived. The integrated Coulomb dissociation cross section for two proton emission were determined with two different techniques. The inclusive measurement yields a cross section of 214(29stat)(20sys) mb, whereas the exclusive reconstruction results in a cross section of 226(14stat)(23sys) mb. Both results are in very good agreement. The Coulomb dissociation cross section for the one-proton emission channel is extracted solely from the exclusive measurement and is 54(8stat)(6sys) mb.
Furthermore, the development of the Low Energy Neutron detector Array (LENA) for the upcoming R3B setup is described. The detector will be utilized in charge-exchange reactions to detect the low-energy recoil neutrons from (p,n)-type reactions. These reaction studies are of particular importance in the astrophysical context and can be used to constrain half lifes under stellar conditions. In the frame of this work, prototypes of the detector were built and successfully commissioned in several international laboratories.
The analysis was supported by detailed simulations of the detection characteristics.
In this thesis I use effective models to investigate the properties of QCD-like theories at nonzero temperature and baryon chemical potential. First I construct a PNJL model using a lattice spin model with nearestneighbor interactions for the gauge sector and four-fermion interactions for the quarks in (pseudo)real representations of the gauge group. Calculating the phase diagram in the plane of temperature and quark chemical potential in QCD with adjoint quarks, it is qualitatively confirmed that the critical temperature of the chiral phase transition is much higher than the deconfinement transition temperature. At a chemical potential equal to half of the diquark mass in the vacuum, a diquark Bose–Einstein condensation (BEC) phase transition occurs. In the two-color case, a Ginzburg–Landau expansion is used to study the tetracritical behavior around the intersection point of the deconfinement and BEC transition lines which are both of second order. A compact expression for the expectation value of the Polyakov loop in an arbitrary representation of the gauge group is obtained for any number of colors, which allows us to study Casimir scaling at both nonzero temperature and chemical potential. Subsequently I study the thermodynamics of two-color QCD (QC2D) at high temperature and/or density using ZQCD, a dimensionally reduced superrenormalizable effective theory, formulated in terms of a coarse grained Wilson line. In the absence of quarks, the theory is required to respect the Z2 center symmetry, while the effects of quarks of arbitrary masses and chemical potentials are introduced via soft Z2 breaking operators. Perturbative matching of the effective theory parameters to the full theory is carried out explicitly, and it is argued how the new theory can be used to explore the phase diagram of two-color QCD.
Thermal expansion measurements provide a sensitive tool for exploring a material's thermodynamic
properties in condensed matter physics as they provide useful information
on the electronic, magnetic and lattice properties of a material. In this thesis, thermal
expansion measurements have been carried out both at ambient-pressure and under hydrostatic
pressure conditions. From the materials point of view, the spin-liquid candidate
Kappa-(BEDT-TTF) 2 Cu 2(CN)3 has been studied extensively as a function of temperature and
magnetic field. Azurite, Cu 3 (CO 3) 2 (OH) 2 - a realization of a one-dimensional distorted
Heisenberg chain is also studied both at ambient and hydrostatic pressure to demonstrate
the proper functioning of the newly built setup "thermal expansion under pressure". ...
Seit Anbeginn der Festkörperphysik ist die Frage, warum manche Materialien metallisch sind, andere dagegen isolierend, von zentraler Bedeutung. Eine erste Erklärung wurde durch die Bändertheorie [23, 44] gegeben. Die Elektronen sind dem periodischen Potential der Rumpfatome ausgesetzt, wodurch ein Energiespektrum bestehend aus Bändern erzeugt wird und die Füllung dieser Bänder bestimmt die Leitungseigenschaften des Festkörpers. ...
Interacting ultracold gases in optical lattices: non-equilibrium dynamics and effects of disorder
(2012)
This dissertation aims at giving a theoretical description of various applications of ultracold gases. A particular focus is cast upon the dynamical evolution of bosonic condensates in non-equilibrium by means of the time-dependent Gutzwiller method. Ground state properties of strongly interacting fermionic atoms in box and speckle disordered lattices are investigated via real-space dynamical mean-field theory. ...