Institutes
Refine
Year of publication
Document Type
- Doctoral Thesis (223) (remove)
Has Fulltext
- yes (223)
Is part of the Bibliography
- no (223) (remove)
Keywords
- Beschleuniger (3)
- HADES (3)
- Heavy Ion Collisions (3)
- CBM (2)
- CBM Experiment (2)
- CBM experiment (2)
- Control System (2)
- Detector (2)
- Dissertation (2)
- EPICS (2)
- FAIR (2)
- Flow (2)
- Functional Renormalization Group (2)
- Neutron star (2)
- Numerical Relativity (2)
- Physics (2)
- QCD (2)
- Radio Frequenz Quadrupol (2)
- Teilchenbeschleuniger (2)
- Toroidales Magnetfeld (2)
- detector (2)
- energy system design (2)
- particle physics (2)
- power transmission (2)
- quantum chromodynamics (2)
- thin films (2)
- 2D materials (1)
- 325 MHz (1)
- ALICE (1)
- ALICE upgrade (1)
- Absolutkonfiguration (1)
- Accelerator (1)
- Activation (1)
- Activation experiment (1)
- Ageing (1)
- Akustik (1)
- Anisotropic flow (1)
- Artificial Intelligence (1)
- Astrophysics (1)
- Auditory cortex (1)
- Beschleunigung von Elektronen und Protonen (1)
- Betatronstrahlung (1)
- Binary (1)
- Biomoleküle (1)
- Black hole (1)
- Bohmian mechanics (1)
- Boltzmann equation (1)
- Bulk viscosity (1)
- CERN PSB (1)
- CH-Struktur (1)
- CO2 emission reduction targets (1)
- Chiralität (1)
- Chopper (1)
- Color Glass Condensate (1)
- Color superconductivity (1)
- Coltrims (1)
- Compressed Baryonic Matter (1)
- Compton scattering (1)
- Correlated systems (1)
- Correlations (1)
- Coulomb Explosion Imaging (1)
- Cross section (1)
- Czochralski method (1)
- DLA Elektronen (1)
- Deep Learning (1)
- Density functional theory (1)
- Detektor (1)
- Deuteronen (1)
- Dynamical mean field theory (1)
- Eingebettetes optisches System (1)
- Einplatinene Kamera (1)
- EuB6 (1)
- Exotic State (1)
- FEBID (1)
- FLASH Effekt (1)
- FRANZ-Projekt (1)
- Finite-Differenzen (1)
- Fluka (1)
- Fluktuationsspektroskopie (1)
- Fragmentierungsquerschnitte (1)
- Funktionale Renormierungsgruppe (1)
- GEANT (1)
- Gabor lens (1)
- Gammakalorimeter (1)
- Global polarization (1)
- Gravitational Waves (1)
- Gravitational wave (1)
- HBT (1)
- HLT (1)
- Hadron Spectroscopy (1)
- Heavy-ion Collisions (1)
- Heavy-ion collision (1)
- Heavy-ion collisions (1)
- Heavy-ions (1)
- High-Level Trigger (1)
- High-energy photoabsorption (1)
- Historie (1)
- Hochenergiephysik (1)
- Hochstrom-Ionenquelle (1)
- Homeostasis (1)
- Hydrodynamic (1)
- Inclusive Reconstruction (1)
- Injektionssystem (1)
- Interferometrie (1)
- Inverse Kinematics (1)
- Ion Beam (1)
- Iron pnictides (1)
- Kaons (1)
- Keldysh-Formalismus (1)
- Kinetic Theory (1)
- Kitaev model (1)
- Kupfer-63 (1)
- LHC (1)
- LINAC (1)
- Ladder-RFQ (1)
- Lambda Hyperon (1)
- Langsame Extraktion (1)
- Laute (1)
- Learning (1)
- Linac (1)
- MAPS (1)
- MYRRHA (1)
- Mach cones (1)
- Magnetic field (1)
- Magnons (1)
- Mars (1)
- Metasurfaces (1)
- Micro Vertex Detector (1)
- Molekülphysik (1)
- Multimessenger (1)
- NA61/SHINE (1)
- Network model (1)
- Neural Networks (1)
- Neutron Star (1)
- Nicht-linearer Transport (1)
- Nichtinvasiv (1)
- Nickel-63 (1)
- Non-dipole (1)
- Nuclear Astrophysics (1)
- Nukleosynthese (1)
- Numerical Renormalization Group (1)
- O(4) conjecture (1)
- Open Charm (1)
- Particle Accelerator (1)
- Phase diagram (1)
- Plasticity (1)
- Population activity (1)
- Protonen (1)
- Protonen Linac (1)
- Quantenphysik (1)
- Quantum Impurity System (1)
- Quantum chromodynamics (1)
- RFQ (1)
- Representational drift (1)
- Riccati equation (1)
- Rydberg (1)
- SYK model (1)
- Scattering-type Scanning Near-field Optical Microscopy (1)
- Schaum (1)
- Schottky (1)
- Scintillation (1)
- Self-triggered front-end electronics (1)
- Septum (1)
- Shield (1)
- Shock Waves (1)
- Silicon Tracking System (1)
- Silicon tracking system (1)
- Slavkovska (1)
- Solid state theory (1)
- Spectators (1)
- Speicherring (1)
- Spektroskopie (1)
- Spinwaves (1)
- Spinwellen (1)
- Stahlenschäden (1)
- Storage Ring (1)
- Strahltransport (1)
- Strange hadrons (1)
- Synaptic plasticity (1)
- Synchrotron (1)
- Szintillation (1)
- THz (1)
- THz imaging (1)
- TNSA (1)
- TPSC (1)
- TeraFET (1)
- Theoretical neuroscience (1)
- Theta-Pinch (1)
- Topologische Zustände (1)
- Transition Radiation Detector (1)
- Tumortherapie (1)
- Ultrakalte Quantengase (1)
- UrQMD (1)
- Vertex Detector (1)
- Weak Decays (1)
- Wigner function (1)
- YbNi4P2 (1)
- YbRh2Si2 (1)
- Yttrium-Eisengranat (1)
- accelerator physics (1)
- application (1)
- atomic cluster deposition (1)
- atomic cluster on a suface (1)
- beam dynamics (1)
- brightness (1)
- bunch-to-bucket (1)
- chiral effect (1)
- chromium (1)
- circadian rhythm (1)
- closed orbit feedback system (1)
- commissioning (1)
- correlated electrons (1)
- detectors (1)
- diagnostics (1)
- dynamical mean-field theory (1)
- electromagnetic fields (1)
- electron tunneling (1)
- equation of state (1)
- field-effect transistor (1)
- field-effect transistors (1)
- fluctuations (1)
- frequency beating (1)
- gasous detectors (1)
- granular metals (1)
- granulare Metalle (1)
- half-integer resonance (1)
- heavy fermions (1)
- heavy ions (1)
- heavy-ion physics (1)
- high-Tc superconductivity (1)
- high-energy physics (1)
- ionisierende Strahlung (1)
- ionizing radiation (1)
- large-scale integration of renewable power generation (1)
- large-scale integration of variable renewable generation (1)
- laser-ion acceleration (1)
- lattice (1)
- lattice QCD (1)
- lattice-supersolid (1)
- liver, pancreas (1)
- low-mass dilepton (1)
- many-body blockade (1)
- many-body method (1)
- nanofractal formation (1)
- nanofractal fragmentation (1)
- nnp (1)
- non-neutral plasma (1)
- nonneutral plasma (1)
- optimal wind/solar mix (1)
- organotypic slice culture (1)
- p-Linac (1)
- phase shift (1)
- piezoresistivity (1)
- plasmonics (1)
- pressure sensors (1)
- quantum criticality (1)
- quantum hydrodynamics (1)
- quantum mechanics (1)
- quark gluon plasma (1)
- quark-gluon plasma temperature (1)
- quasiparticle expansion (1)
- resonances (1)
- resonant (1)
- s-Prozess (1)
- sign problem (1)
- single crystal growth (1)
- space charge (1)
- stability analysis (1)
- stability matrix eigenvalues (1)
- storage ring (1)
- strong correlations (1)
- su(2) x u(2) (1)
- superconductivity (1)
- supraleitend (1)
- synchronization two rings (1)
- terahertz (1)
- tetraquarks (1)
- thermal transition (1)
- thermodynamics (1)
- thermoelectrics (1)
- topological states (1)
- transmission grid extensions (1)
- ultracold quantum gases (1)
- van der Waals (1)
Institute
- Physik (223)
- MPI für Biophysik (1)
In der Experimentierhalle der Physik am Campus Riedberg der Goethe – Universität wird gegenwärtig die Beschleunigeranlage FRANZ aufgebaut. FRANZ steht für Frankfurter Neutronenquelle am Stern-Gerlach-Zentrum. Die Anlage bietet vielfältige Experimentiermöglichkeiten in der Untersuchung intensiver, gepulster Protonenstrahlen. Ein Forschungsschwerpunkt an den sekundären Neutronenstrahlen sind Messungen zur nuklearen
Astrophysik. Die Neutronen werden durch einen 2 MeV Protonenstrahl mittels der Reaktion 7Li (p, n) 7Be erzeugt. Die geplanten Experimente erfordern sowohl eine hier weltweit erstmals realisierte Pulsrepetitionsrate von bis zu 250 kHz bei Pulsströmen im 100 mA – Bereich als auch eine extreme Pulskompression auf eine Nanosekunde bei dann auftretenden Pulsströmen im Ampere – Bereich. Daneben ist auch ein Dauerstrich – Strahlbetrieb im mA – Strombereich möglich. Auch viele einzelne Beschleunigerkomponenten wie die Ionenquelle, der Chopper zur Pulsformung, die hochfrequent gekoppelte RFQ-IH-Kombination, der Rebuncher in Form einer CH – Struktur und der Bunchkompressor sind Neuentwicklungen. Mittlere Strahlleistungen von bis zu 24 kW treten im Niederenergiestrahltransportbereich auf, da die Ionenquelle grundsätzlich im Dauerstrich zu betreiben ist, auch bei Hochstrom mit hohen Pulsrepetitionsraten. Der Personen- und Geräteschutz spielt damit auch eine wesentliche Rolle bei der Auslegung des Kontrollsystems für FRANZ. Der Aufbau von FRANZ und seine wesentlichen Komponenten werden in Kapitel 2 erläutert. Die vielen unterschiedlichen Komponenten wie Hochspannungsbereich, Magneten, Hochfrequenzbauteile und Kavitäten, Vakuumbauteile, Strahldiagnose und Detektoren machen plausibel, dass auch das Kontrollsystem für eine solche Anlage speziell ausgelegt werden muss. In Kapitel 4 werden zum Vergleich die Konzepte zur Steuerung und Regelung aktueller, großer Beschleunigerprojekte aufgezeigt, nämlich für die „European Spallation Source ESS“ und für die „Facility for Antiproton and Ion Research FAIR“. In der vorliegenden Arbeit wurde die Ionenquelle als komplexe Beschleunigerkomponente ausgewählt, um Entwicklungen zur Steuerung und Regelung durchzuführen und zu testen. Zum Anfahren und Betreiben der Ionenquelle wurde ein Flussdiagramm (Abb. 5.15) entwickelt und realisiert. Im Detail wurden Untersuchungen zur Abhängigkeit der Heizkathodenparameter von der Betriebsdauer gemacht. Daraus konnte ein Algorithmus zur Vorhersage eines rechtzeitigen Filamentaustausches abgeleitet werden. Weiterhin konnte die Nachregelung des Kathodenheizstromes automatisiert werden, um damit die Bogenentladungsspannung innerhalb eines Intervalls von ± 0.5 V zu stabilisieren. Das Anfahren des Filamentstroms wurde ebenfalls automatisiert. Dazu wird die Vakuumdruckänderung in Abhängigkeit der Filamentstromerhöhung gemessen, ausgewertet und daraus der nächste erlaubte Stromerhöhungsschritt abgeleitet. Auf diese Weise wird der Betriebszustand schneller und kontrollierter erreicht als bei manuellem Hochfahren. Das Ziel eines unbemannten Ionenquellenbetriebs ist damit näher gerückt. In einem ersten Test zur Komponentensteuerung und zur Datenaufnahme wurde ein Ionenstrahl extrahiert und durch den ersten Fokussierungsmagneten – einen Solenoiden – transportiert. Es wurde der Erregungsstrom des Solenoiden sowie die Strahlenergie automatisch durchgefahren, die Daten abgespeichert und daraus ein Kontourplot zum gemessenen Strahlstrom hinter der Fokussierlinse erstellt (Abb. 5). Die vorliegende Arbeit beschäftigt sich nur mit den „langsamen“ Steuerungs- und Regelungsprozessen, während die schnellen Prozesse im Hochfrequenzregelungssystem unabhängig geregelt werden. Neben der Überwachung des Betriebszustandes aller Komponenten werden auch alle für den Service und die Personensicherheit benötigten Daten weggeschrieben. Das System basiert auf MNDACS (Mesh Networked Data Acquisition and Control System) und ist in JAVA geschrieben. MNDACS besteht aus einem Kernel, welcher die Komponententreiber-Software sowie den Netzwerkserver und das graphische Netzwerkinterface (GUI) betreibt. Weterhin gehört dazu das Driver Abstraction Layer (DAL), welches den Zugang zu weiteren Computern oder zu lokalen Treibern ermöglicht. CORBA stellt die Middleware für Netzwerkkommunikation dar. Dadurch wird Kommunikation mit externer Software geregelt, weiterhin wird die Umlegung von Kommunikation im Fall von Leitungsunterbrechungen oder einem lokalen Computerabsturz festgelegt. Es gibt bei FRANZ zwei Kontrollebenen: Über Ethernet läuft die „High Level Control“ und die Datenverarbeitung. Über die „Low Level Control“ läuft das Interlock – und Sicherheitssystem. Die Netzwerkverbindungen laufen über 1 Gb Ethernet Links, womit ein schneller Austausch auch bei lokalen Netzwerkstörungen noch möglich ist. Um bei Stromausfällen das Computersystem am Laufen zu halten, wurde im Rahmen dieser Arbeit ein „Uninterruptable Power Supply“ UPS beschafft und erfolgreich am Hochspannungsterminal getestet.
The Large Hadron Collider (LHC) is the biggest and most powerful particle accelerator in the world, designed to collide two proton beams with particle momentum of 7 TeV/c each. The stored energy of 362MJ in each beam is sufficient to melt 500 kg of copper or to evaporate about 300 litre of water. An accidental release of even a small fraction of the beam energy can cause severe damage to accelerator equipment. Reliable machine protection systems are necessary to safely operate the accelerator complex. To design a machine protection system, it is essential to know the damage potential of the stored beam and the consequences in case of a failure. One (catastrophic) failure would be, if the entire beam is lost in the aperture due to a problem with the beam dumping system.
This thesis presents the simulation studies, results of a benchmarking experiment, and detailed target investigation, for this failure case. In the experiment, solid copper cylinders were irradiated with the 440GeV proton beam delivered by the Super Proton Synchrotron (SPS) at the High Radiation to Materials (HiRadMat) facility at CERN. The experiment confirmed the existence of the so-called hydrodynamic tunneling phenomenon for the first time. Detailed numerical simulations for particle-matter interaction with FLUKA, and with the two-dimensional hydrodynamic code, BIG2, were carried out. Excellent agreement was found between the experimental and the simulation results that validate predictions for the 7TeV beam of the LHC. The hydrodynamic tunneling effect is of considerable importance for the design of machine protection systems for accelerators with high stored beam energy. In addition, this thesis presents the first studies of the damage potential with beam parameters of the Future Circular Collider (FCC).
To detect beam losses due to fast failures it is essential to have fast beam instrumentation. Diamond based particle detectors are able to detect beam losses within a nanosecond time scale. Specially designed diamond detectors were used in the experiment mentioned above. Their efficiency and response has been studied for the first time over 5 orders of bunch intensity with electrons at the Beam Test Facility (BTF) at INFN, Frascati, Italy. The results of these measurements are discussed in this thesis. Furthermore an overview of the applications of diamond based particle detectors in damage experiments and for LHC operation is presented.
Light scalar mesons can be understood as dynamically generated resonances. They arise as 'companion poles' in the propagators of quark-antiquark seed states when accounting for hadronic loop contributions to the self-energies of the latter. Such a mechanism may explain the overpopulation in the scalar sector - there exist more resonances with total spin J=0 than can be described within a quark model.
Along this line, we study an effective Lagrangian approach where the isovector state a_{0}(1450) couples via both non-derivative and derivative interactions to pseudoscalar mesons. It is demonstrated that the propagator has two poles: a companion pole corresponding to a_{0}(980) and a pole of the seed state a_{0}(1450). The positions of these poles are in quantitative agreement with experimental data. Besides that, we investigate similar models for the isodoublet state K_{0}^{*}(1430) by performing a fit to pion-kaon phase shift data in the I=1/2, J=0 channel. We show that, in order to fit the data accurately, a companion pole for the K_{0}^{*}(800), that is, the light kappa resonance, is required. A large-N_{c} study confirms that both resonances below 1 GeV are predominantly four-quark states, while the heavy states are quarkonia.
The PANDA experiment will be one of the flagship experiments at the future Facility for Antiproton and Ion Research (FAIR) in Darmstadt, Germany. It is a versatile detector dedicated to topics in hadron physics such as charmonium spectroscopy and nucleon structure. A DIRC counter will deliver hadronic particle identification in the barrel part of the PANDA target spectrometer and will cleanly separate kaons with momenta up to 3.5 GeV/c from a large pion background. An alternative DIRC design option, using wide Cherenkov radiator plates instead of narrow bars, would significantly reduce the cost of the system. Compact fused silica photon prisms have many advantages over the traditional stand-off boxes filled with liquid. This work describes the study of these design options, which are important advancements of the DIRC technology in terms of cost and performance. Several new reconstruction methods were developed and will be presented. Prototypes of the DIRC components have been built and tested in particle beam, and the new concepts and approaches were applied. An evaluation of the performance of the designs, feasibility studies with simulations, and a comparison of simulation and prototype tests will be presented.
Eine möglichst realistische Abschätzung von Strahlenschäden ist von entscheidender Bedeutung im Strahlenschutz und für die Strahlentherapie. Die primären Strahlenschäden an der DNS werden heute mit Monte-Carlo-Codes berechnet. Diese Codes benötigen möglichst genaue Fragmentierungsquerschnitte verschiedenster biomolekularer Systeme als Eingangsparameter. Im Rahmen der vorliegenden Arbeit wurde ein Experiment aufgebaut, welches die Bestimmung der Fragmentierungsquerschnitte von Biomolekülen ermöglicht. Die einzelnen Baugruppen des Aufbaus wurden vor dem Beginn des Experimentes bezüglich ihrer Eigenschaften, die die Genauigkeit der Messergebnisse beeinflussen können, charakterisiert. Die Resultate dieser Experimente werden als Eingangsdaten für die Berechnung von primären strahleninduzierten Schäden in der DNS mit Hilfe von Monte-Carlo-Codes eingesetzt.
Eine besondere Herausforderung stellte die Präparation eines Überschallgasstrahls für biomolekulare Substanzen dar. Für die Präparation müssen die Targetsubstanzen zunächst in die Gasphase überführt werden. Im Falle von Biomolekülen ist diese Überführung auf Grund ihrer niedrigen Dampfdrücke bei Raumtemperatur und chemischen Reaktivität mit technischen Problemen verbunden. Die Probleme wurden mittels einer speziellen Konstruktion der Präparationseinrichtung, welche eine direkte Einleitung der Probensubstanzen in die vom Trägergas durchströmte Mischkammer ermöglicht, gelöst. Für die Genauigkeit der gemessenen Fragmentierungsquerschnitte spielen mehrere Faktoren eine Rolle. Neben dem Bewegungsprofil des Überschallgasstrahls, den kinetischen Energien der Fragmentionen und den ionenoptischen Eigenschaften des Flugzeitspektrometers beeinflusst die geometrische Beschaffenheit der Detektionszone maßgeblich die Genauigkeit des Experimentes. Die Position und Ausdehnung des sichtbaren Volumens sind nicht nur durch den Überlappungsbereich zwischen dem Elektronen- und dem Überschallgasstrahl bestimmt, sondern hängen auch von der kinetischen Energie der Fragmente ab. Für dessen Ermittlung wurden daher auch die Trajektorien der Fragmente simuliert. Bei den Experimenten an der PTB-Apparatur ist die frei wählbare Zeitdifferenz zwischen dem Auslösen eines Elektronenpulses und dem Absaugen der Fragmentionen ein wichtiger Messparameter. Ihr Einfluss auf die Messergebnisse wurde ebenfalls neben der Nachweiswahrscheinlichkeit des verwendeten Ionendetektors untersucht. Die Kalibrierung der Flugzeitspektren, d. h. die Umwandlung der Flugzeitspektren in Massenspektren erfolgte anhand der bekannten Flugzeitspektren von Edelgasen und Wasserstoff.
Nach der Charakterisierung der Einflussfaktoren und Kalibrierung der Flugzeitspektren wurden die energieabhängigen Fragmentierungsquerschnitte für Elektronenstoß von mehreren organischen Molekülen, darunter die von Modellmolekülen für die DNS-Bausteine gemessen. Die Flugzeitspektren von THF wurden mit der PTB-Apparatur für einige kinetische Energien der Elektronen in Abhängigkeit von der Zeitdifferenz zwischen dem Auslösen des Elektronenpulses und dem Starten der Analyse durchgeführt. Messungen von Pyrimidin wurden sowohl an der PTB-Apparatur als auch mit COLTRIMS durchgeführt. Die mit COLTRIMS gewonnenen Ergebnisse liefern wichtige Zusatzinformationen über die Fragmentierungsprozesse. COLTRIMS ermöglicht die Messung der zeitlichen Korrelationen zwischen den auftretenden Fragmentionen und damit tiefere Einblicke in die bei der Entstehung der Fragmente beteiligten Reaktionskanäle. Der Vorteil der PTB-Apparatur besteht darin, dass die relativen Auftrittswahrscheinlichkeiten aller Fragmentionen genauer bestimmt werden können.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
In this work, the complex structure of ionization and dissociation pathways on the potential energy curves in small molecules were investigated that are initiated by the absorption of a sequence of multi-color pulses in the XUV, VUV, and IR spectrum. Femtosecond pump-probe spectroscopy was used to track the evolution of nuclear dynamics in neutral hydrogen molecules. Previously unpublished excitation and ionization pathways leading to the dissociative ionization of hydrogen molecules were investigated by employing 3D momentum imaging spectroscopy. These studies were extended to oxygen molecules where an XUV attosecond pulse train coherently ionized several electronic states of O2+ followed by the dissociation of the molecule via multiple pathways. The infrared electric field of the driving laser was then used to couple the electronic and nuclear wave-packets, thus, manipulating the dissociation dynamics of the molecule on an attosecond time scale.
In order to perform the experiments presented here, a novel experimental setup was developed and constructed. It combines an existing high-flux High Harmonic Generation light source that delivers attosecond pulse trains in the VUV and XUV spectrum with a state-of-the-art 3D momentum imaging apparatus (COLTRIMS), as well as a beamline consisting of several experimental tools enabling the selection, characterization, and propagation of the photon spectrum.
The phenomenon of magnetism has been known to humankind for at least over 2500 years and many useful applications of magnetism have been developed since then, starting from the compass to modern information storage and processing devices. While technological applications are an important part of the continuing interest in magnetic materials, their fundamental properties are still being studied, leading to new physical insights at the forefront of physics. The magnetism of magnetic materials is a pure quantum effect due to the electrons that carry an intrinsic spin of 1/2. The physics of interacting quantum spins in magnetic insulators is the main subject of this thesis.We focus here on a theoretical description of the antiferromagnetic insulator Cs2CuCl4. This material is highly interesting because it is a nearly ideal realization of the two-dimensional antiferromagnetic spin-1/2 Heisenberg model on an anisotropic triangular lattice, where the Cu(2+) ions carry a spin of 1/2 and the spins interact via exchange couplings. Due to the geometric frustration of the triangular lattice, there exists a spin-liquid phase with fractional excitations (spinons) at finite temperatures in Cs2CuCl4. This spin-liquid phase is characterized by strong short-range spin correlations without long-range order. From an experimental point of view, Cs2CuCl4 is also very interesting because the exchange couplings are relatively weak leading to a saturation field of only B_c=8.5 T. All relevant parts of the phase diagram are therefore experimentally accessible. A recurring theme in this thesis will be the use of bosonic or fermionic representations of the spin operators which each offer in different situations suitable starting points for an approximate treatment of the spin interactions. The methods which we develop in this thesis are not restricted to Cs2CuCl4 but can also be applied to other materials that can be described by the spin-1/2 Heisenberg model on a triangular lattice; one important example is the material class Cs2Cu(Cl{4-x}Br{x}) where chlorine is partially substituted by bromine which changes the strength of the exchange couplings and the degree of frustration.
Our first topic is the finite-temperature spin-liquid phase in Cs2CuCl4. We study this regime by using a Majorana fermion representation of the spin-1/2 operators motivated by theoretical and experimental evidence for fermionic excitations in this spin-liquid phase. Within a mean-field theory for the Majorana fermions, we determine the magnetic field dependence of the critical temperature for the crossover from spin-liquid to paramagnetic behavior and we calculate the specific heat and magnetic susceptibility in zero magnetic field. We find that the Majorana fermions can only propagate in one dimension along the direction of the strongest exchange coupling; this reduction of the effective dimensionality of excitations is known as dimensional reduction.
The second topic is the behavior of ultrasound propagation and attenuation in the spin-liquid phase of Cs2CuCl4, where we consider longitudinal sound waves along the direction of the strongest exchange coupling. Due to the dimensional reduction of the excitations in the spin-liquid phase, we expect that we can describe the ultrasound physics by a one-dimensional Heisenberg model coupled to the lattice degrees of freedom via the exchange-striction mechanism. For this one-dimensional problem we use the Jordan-Wigner transformation to map the spin-1/2 operators to spinless fermions. We treat the fermions within the self-consistent Hartree-Fock approximation and we calculate the change of the sound velocity and attenuation as a function of magnetic field using a perturbative expansion in the spin-phonon couplings. We compare our theoretical results with experimental data from ultrasound experiments, where we find good agreement between theory and experiment.
Our final topic is the behavior of Cs2CuCl4 in high magnetic fields larger than the saturation field B_c=8.5 T. At zero temperature, Cs2CuCl4 is then fully magnetized and the ground state is therefore a ferromagnet where the excitations have an energy gap. The elementary excitations of this ferromagnetic state are spin-flips (magnons) which behave as hard-core bosons. At finite temperatures there will be thermally excited magnons that interact via the hard-core interaction and via additional exchange interactions. We describe the thermodynamic properties of Cs2CuCl4 at finite temperatures and calculate experimentally observable quantities, e.g., magnetic susceptibility and specific heat. Our approach is based on a mapping of the spin-1/2 operators to hard-core bosons, where we treat the hard-core interaction by the self-consistent ladder approximation and the exchange interactions by the self-consistent Hartree-Fock approximation. We find that our theoretical results for the specific heat are in good agreement with the available experimental data.
Within this thesis, the mechanical integration of the Micro Vertex Detector (MVD) of the Compressed Baryonic Matter (CBM) experiment is developed. The CBM experiment, which is being set up at the future FAIR facility, aims to investigate the phase diagram of strongly interacting matter in the regime of high net-baryon densities and moderate temperatures. Heavy-ion collisions at beam energies in the range of 2 to 45 AGeV, complemented by results from elementary reactions, will allow access to these conditions. The experiments conducted at LHC (CERN, Switzerland) and at RHIC (BNL, USA = does not apply within the Beam Energy Scan program) so far focus on the investigation of the phase diagram in the regime of high temperatures and vanishing net-baryon densities. The high beam intensities provided by FAIR will enable CBM to focus its experimental program on systematical studies of rare particles. Among other particle species, open charm-carrying particles are one of the most promising observables to investigate the medium created in heavy-ion collisions since their charm quarks are exposed to the medium and traverse its whole evolution. The fact that the decay particles of these rare observables are also produced abundantly in direct processes in heavy-ion collisions results in a huge combinatorial background which attributes specific requirements to the detector systems. The call for a high interaction rate leads to a cutting-edge detector system which provides an excellent spatial resolution, thin detector stations and the capability to cope with the induced radiation as well as the high rate of traversing particles and the resulting track density. The required demands are to be implemented by the MVD which will be equipped with four planar stations positioned at 50, 100, 150 and 200 mm downstream the target. The geometrical acceptance, which has to be covered with charge-sensitive material, is defined according to the requirements of CBM in the polar angle range of [2.5°; 25°]. The MVD stations have to contribute as little as possible to the overall material budget. The expected beam intensity and the vicinity close to the target require silicon detectors that provide a hardness against non-ionizing radiation of more than 10^13 n_eq/cm² and against ionizing radiation of more than 1 Mrad. In addition, the read-out time of the sensors has to be as short as possible to avoid potential ambiguities in the particle tracking caused by the pile-up of hits having emerged from different collisions. For the time being, Monolithic Active Pixel Sensors (MAPS) offer the optimal choice of technology required to address the physics program of CBM with respect to the spectroscopy of open charm and di-electrons. The geometrical properties of these sensors define the layout of the detector. To limit the multiple scattering of the produced particles inside the geometrical acceptance, the sensors and the MVD have to operate in a moderate vacuum. The sensors are thinned down to a thickness of 50 µm and, to achieve a maximum polar angle coverage, they are glued onto both sides of dedicated thin carriers. These carriers, which are made of highly thermally conductive materials such as CVD diamond or encapsulated TPG, allow efficient extraction of the power produced in the sensors. This enables their operation at temperatures well below 0 °C as suggested by corresponding radiation hardness studies. Dedicated actively cooled aluminum-based heat sinks are positioned outside of the acceptance to dissipate the heat produced by the sensors and the front-end electronics. The design of the MVD, including the realistic thicknesses of the integrated materials, has been developed and refined in the context of this thesis. It has been transformed into a unique software model which is used to simulate and further optimize the mechanical and thermal properties of the MVD, as well as in sophisticated physics simulations. The model allowed evaluation of the material budget of each individual MVD station in its geometrical acceptance. The calculated averaged material budget values stay well below the material budget target values demanded by the physics cases. The thermal management of the MVD has been simulated on the level of a quadrant of each MVD station – four identically constructed quadrants are forming an MVD station – taking into account material properties of the sensors, the glue and the sensor carrier. The temperature gradients across the pixels of a given sensor area in the direction of the rows and columns were found to be in an acceptable range of below 5 K. A temperature difference between the thermal interface area and the maximum sensor temperature of dT = 5 K on the first and a value of dT = 40 K on the fourth MVD station has been thermally simulated assuming a sensor power dissipation of 0.35 W/cm², highlighting the need to optimize the thermal interface between the involved materials as well as the power dissipation of the sensors. The feasibility of several key aspects required for the construction phase of the MVD has been investigated within the MVD Prototype project. The construction of the MVD Prototype allowed evaluation, testing and validation of the handling and the double-sided integration of ultra-thin sensors – the required working steps for their integration have been specified, evaluated and successfully established – as well as their operation in the laboratory and during a concluding in-beam test using high-energetic pions provided by the CERN-SPS. The thermal characterization of the MVD Prototype during its operation – in a temperature range from [5 °C; 25 °C], not in vacuum – confirmed the corresponding thermal simulations conducted during its design phase and substantiated the results of the thermal simulations for the design of the MVD. The aim of a material budget value of only x/X_0 ~ 0.3% for the MVD Prototype has been accomplished. Analyzing the in-beam data, the nominal sensor performance parameters were successfully reproduced, demonstrating that the proposed integration process does not impair the sensors’ performance. Moreover, no evidence of potential impact on the sensors’ performance arising from mechanical weaknesses of the MVD Prototype mechanics has been found within the analyzed data. Based on the MVD Prototype and the simulations of the material budget as well as the thermal management, this thesis evaluated the work packages, procedures and quality assurance parameters needed to set up the starting version of the MVD and addressed open questions as well as critical procedures to be studied prior to the production phase of the detector, emphasizing the evaluation of the cooling concept in vacuum and the integration of sensors in ladder structures on both sides of the quadrants of the MVD stations.
Am GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt, wird für die Erweiterung der Forschungsmöglichkeiten am Bau des FAIR Projektes gearbeitet. Hierfür wird unter anderem ein Ringbeschleuniger gebaut (SIS100), der mit 100Tm den bestehenden Ring (SIS18) in magnetischer Steifigkeit ergänzen wird. Um SIS100 an SIS18 anzubinden, wird eine Transferstrecke benötigt, welche den Transfer von Ionen zwischen den Ringen übernimmt. In solchen Transferstrecken werden Quadrupollinsen mit hohen Gradienten benötigt. Ebenso werden für die finale Fokussierung von hochintensiven Strahlpulsen aus Synchrotronen auf Targets Linsen mit hohen Feldgradienten benötigt. Allerdings sind die Pulse nur sehr kurz und das Tastverhältnis bei Synchrotronen sehr klein. Daher sollte ein gepulster Fokussiermagnet entwickelt werden, der den hohen Gradientenanforderungen gerecht wird und sowohl platz- als auch energiesparend ist. Die vorliegende Arbeit befasst sich mit der Auslegung des elektrischen Schaltkreises, der Simulation des Magnetfeldes und der konstruktiven Umsetzung eines solchen gepulsten Quadrupols. Der elektrische Schaltkreis ist so ausgelegt, dass eine hohe Repetitionsrate zur Fokussierung für Teilchenpakete möglich ist. Die Linse wurde aus einer Luftspule ohne Eisenjoch aufgebaut. Die cos(2θ)-Verteilung des Stroms durch die Leiter wurde durch ein Design gesichert, welches den Skin-Effekt berücksichtigt und entsprechend ausgelegte Litzenkabel verwendet. Um die Magnetfeldverteilung des Fokussiermagneten zu untersuchen, wurden statische und transiente Simulationen mit dem Programm CST Mircowave Studio Suite vorgenommen. Zentraler Punkt bei der Neuentwicklung waren die Luftspulen. Um einen linearen Magnetfeldanstieg von der Strahlachse zum Aperturrand zu gewährleisten, muss die Stromverteilung in der Leiterspule so homogen wie möglich sein. Um bei Pulslängen von 170 µsec den Skineffekt zu berücksichtigen, wurde die Leiterspule aus HF-Litzen von je mehreren hundert Einzelleitern zusammengestellt, die jeweils gegeneinander isoliert und in Bündeln miteinander verdrillt sind. Außerdem wurde die Linse mit einer lamellierten Schirmung versehen, um das Magnetfeld effektiv nutzen zu können. Ziel der Auslegung war es, zusammen mit einem zweiten Quadrupol im Duplett einen Strahl mit einer magnetischen Steifigkeit von 11 Tm und einer Bunchlänge von 2µsec auf einen Punkt von 0,5 mm Radius zu fokussieren. Bei dem hierfür angestrebten Gradienten von 76 T/m wird eine maximale Stromamplitude von 400 kA benötigt. Im Rahmen dieser Arbeit wurde die Linse ausgelegt, konstruiert und gebaut. Die Funktionalität wurde untersucht und die Feldqualität wurde vermessen und zeigten die erwarteten Parameter. Bei 26 kA Messstrom wurden im Zentrum des Magneten ein maximaler Gradient von 4,5 T/m und Feldwerte von 0,11 T ermittelt. Somit liegt die Abweichung des gemessenen Gradienten bei ca. 5 %. Die durchgängige Umsetzung der homogenen Verteilung der Leiterbündel in der Luftspule und eine vollständige Kompensation des Skineffekts konnten nicht nachgewiesen werden. Jedoch konnte der Einfluss der Kabelzuleitung des Quadrupols auf den Magnetfeldverlauf in den Simulationen und Messungen nachgewiesen werden. Weiterhin wurde für den energieeffizienten Einsatz im Transferkanal zwischen SIS18 und SIS100 ein Energierückgewinnungsschaltkreis entwickelt, der eine Ersparnis von 84 % der Betriebsleistung ermöglicht.
Die vorliegende Arbeit handelt von der Entwicklung, dem Bau, den Zwischenmessungen sowie den abschließenden Tests unter kryogenen Bedingungen einer neuartigen, supraleitenden CH-Struktur für Strahlbetrieb mit hoher Strahllast. Diese Struktur setzt das Konzept des erfolgreich getesteten 19-zelligen 360 MHz CH-Prototypen fort, der einen weltweiten Spitzenwert in Bezug auf Beschleunigungsspannung im Niederenergiesegment erreichte, jedoch wurden einige Aspekte weiterentwickelt bzw. den neuen Rahmenbedingungen angepasst. Bei dem neuen Resonator wurde der Schwerpunkt auf ein kompaktes Design, effektives Tuning, leichte Präparationsmöglichkeiten und auf den Einsatz eines Leistungskopplers für Strahlbetrieb gelegt. Die Resonatorgeometrie besteht aus sieben Beschleunigungszellen, wird bei 325 MHz betrieben und das Geschwindigkeitsprofil ist auf eine Teilcheneingangsenergie von 11.4 MeV/u ausgelegt. Veränderungen liegen in der um 90° gedrehten Stützengeometrie vor, um Platz für Tuner und Kopplerflansche zu gewährleisten, und in der Verwendung von schrägen Stützen am Resonatorein- und ausgang zur Verkürzung der Tanklänge und Erzielung eines flachen Feldverlaufs. Weiterhin wurden pro Tankdeckel zwei zusätzliche Spülflansche für die chemische Präparation sowie für die Hochdruckspüle mit hochreinem Wasser hinzugefügt. Das Tuning der Kavität erfolgt über einen neuartigen Ansatz, indem zwei bewegliche Balgtuner in das Resonatorvolumen eingebracht werden und extern über eine Tunerstange ausgelenkt werden können. Der Antrieb der Stange soll im späteren Betrieb wahlweise über einen Schrittmotor oder einen Piezoaktor stattfinden. Für ein langsames/ statisches Tuning kann der Schrittmotor den Tuner im Bereich +/- 1 mm auslenken, um größeren Frequenzabweichungen in der Größenordnung 100 kHz nach dem Abkühlen entgegenzuwirken. Das schnelle Tuning im niedrigen kHz-Bereich wird von einem Piezoaktor übernommen, welcher den Balg um einige µm bewegen kann, um Microphonics oder Lorentz-Force-Detuning zu kompensieren. Der Resonator wird von einem aus Titan bestehendem Heliummantel umgeben, wodurch ein geschlossener Heliumkreislauf gebildet wird.
Derzeit befinden sich mehrere Projekte in der Planung bzw. im Bau, welche auf eine derartige Resonatorgeometrie zurückgreifen könnten. An der GSI basiert der Hauptteil des zukünftigen cw LINAC auf supraleitenden CH-Strukturen, um einen Strahl für die Synthese neuer, superschwerer Elemente zu liefern. Weiterhin könnte ein Upgrade des vorhandenen GSI UNILAC durch den Einsatz von supraleitenden CH-Resonatoren gestaltet werden. Zudem besteht die Möglichkeit, die bisherige Alvarez-Sektion des UNILAC alternativ durch eine kompakte, supraleitende CH-Sektion zu realisieren. Ebenfalls sollen die beiden parallelbetriebenen Injektorsektionen des MYRRHA-Projektes durch den Einsatz von supraleitenden CH-Strukturen erfolgen.
The chiral phase transition of Quantum Chromo Dynamics (QCD) is investigated with the help of the linear-sigma model and a numerical transport simulation. The scope are non-equilibrium and critical effects of the different type of orders of the transition. Additionally, a mathematical and numerical method is developed which allows to simulate a particle-wave duality and non-continuous interactions, even for classical systems.
Im Rahmen des FRANZ-Projektes wurde nach einer Ionenquelle verlangt welche in der Lage ist einen intensiven hochbrillanten Protonenstrahl von 200 mA bei 120 keV im Dauerstrichbetrieb zur Verfügung zu stellen, bei gleichzeitig niedriger Strahlemittanz. Der recht hohe Protonenstrom von 200 mA stellt dabei eine Herausforderung an den Experimentator dar.
Die grundsätzliche Problematik bei der Entwicklung einer solchen Ionenquelle besteht im Wesentlichen darin, ein geeignetes Extraktionssystem zu designen, welches in der Lage ist den geforderten hohen Protonenstrom zu extrahieren und transportieren. In diesem Zusammenhang wurden Abschätzungen bezüglich des notwendigen Emissionsradius, der elektrischen Feldstärke im Extraktionsspalt sowie des Protonenanteils für den verlangten Protonenstrom von 200 mA durchgeführt. Für die praktische Umsetzung wurden Lösungsstrategien erarbeitet. Ziel war es die elektrische Feldstärke im Gap so hoch wie möglich und den Radius der Emissionsöffnung so klein wie möglich zu wählen, bei gleichzeitig möglichst hohem Protonenanteil. Basierend auf diesen Erkenntnissen wurde ein Prototyp der Bogenentladungs-Volumenionenquelle entwickelt und erfolgreich in Betrieb genommen.
Zur Steigerung des Protonenanteils im Wasserstoffplasma wurden diverse Parameter der Ionenquelle optimiert wie bspw. Bogenleistung, Gasdruck sowie insbesondere die Feldverteilung und die magnetische Flussdichte des magnetischen Filters. Diese Ergebnisse wurden mit dem verbesserten theoretischen Modell zur Erzeugung von atomaren Wasserstoffionenstrahlen verglichen. Um die elektrische Feldstärke im Extraktionsspalt zu steigern wurden die Elektroden aus einem thermisch belastbaren Material hergestellt und einer speziellen Oberflächenbehandlung unterzogen. Des Weiteren wurden theoretische und experimentelle Untersuchungen bezüglich der Emissionsstromdichte und der Strahlqualität durchgeführt. Weiterhin wurde die Emittanz des Ionenstrahls berechnet sowie mit einer eigens am Institut für Angewandte Physik entwickelten Pepperpot-Emittanzmessanlage experimentell bestimmt. Die vorliegende Dissertation präsentiert die Ergebnisse der Entwicklung dieser hocheffizienten Bogenentladungs-Volumenionenquelle.
Atomistic molecular dynamics approach for channeling of charged particles in oriented crystals
(2015)
Der Gitterführungseffekt ist der Prozess der Ausbreitung von geladenen Teilchen entlang der Ebenen oder Achsen von kristallinen Materialien. Seit den 1960er Jahren ist dieser Effekt weitgehend theoretisch und experimentell untersucht worden. Dieser Effekt wurde für die Manipulation von Hochenergiestrahlen, die Hochpräzisionsstruktur- und -fehleranalyse von kristallinen Medien und die Herstellung von hochenergetischer Strahlung angewendet. Zur Abstimmung der Parameter der Gitterführung und Gitterführungsstrahlung wurde dieser Prozess für den Fall von künstlich nanostrukturierten Materialien, wie gebogenen Kristallen, Nanoröhren und Fullerit, angenommen. In den letzten Jahren wurde das Konzept des kristallinen Undulators formuliert und getestet, das besondere Eigenschaften der Strahlung aufgrund der Gitterführung von Projektilen in regelmäßig gebogenen Kristallen vorhersagt.
In dieser Arbeit werden die Prozesse der Gitterführung von Sub- und Multi-GeV-Elektronen und -Positronen durch den atomistischen Molekulardynamik-Ansatz untersucht. Die Ergebnisse dieser Studien wurden in einer Reihe von Artikeln während meiner Promotion in Frankfurt vorgestellt. Dieser Ansatz ermöglicht die Simulation komplexer Fälle von Gitterführung in geraden, gebogenen und periodisch gebogenen Kristallen aus reinen kristallinen Materialien und von gemischten Materialien wie Si-Ge-Kristallen, in mehrschichtigen und nanostrukturierten kristallinen Systemen. Die Arbeit beschreibt die Methode der Simulationen, stellt Ergebnisse von Simulationen für verschiedene Fälle vor und vergleicht die Ergebnisse von Simulationen mit aktuellen experimentellen Daten. Die Ergebnisse werden mit Schätzungen der dechanneling-Länge verglichen, dem Anteil der gittergeführten Projektile, der Winkelverteilung der ausgehenden Projektile und des Strahlungsspektrums.
The upcoming CBM Experiment at FAIR aims at exploring the region of highest net baryonic densities reproducible in energetic heavy ion collisions. Due to the very high beam intensities expected at FAIR, unprecedented data regarding rare observables such as charm quarks and hyperons will be accessible. Open charm mesons are particularly interesting, since they support the reconstruction of the total charm cross-section in order to search for exotic phenomena, e.g. a phase transition towards the quark-gluon plasma which is predicted by several theoretical models. Open charm studies will be performed via secondary vertex reconstruction with a suitable Micro-Vertex Detector (MVD). The CBM-MVD is currently in the development and prototyping phase with primary design goals concentrating on spatial resolution, radiation hardness, material budget, and readout performance. CMOS Monolithic Active Pixel Sensors (MAPS) provide an excellent spatial resolution for the MVD in the order of few um in combination with a low material budget (50 um thickness) and high radiation hardness. The active volume of the devices is formed from the epitaxial layer of standard CMOS wafers. This allows for integration of pixels together with analogue and digital data processing circuits on one single chip. This option was explored with the MIMOSA-26 prototype, which integrates functionalities like pedestal correction, correlated double sampling, discrimination and data sparsification based on zero suppression combined with a small and dense pixel matrix. The pixel array composed of 576 lines of 1152 pixels is read out in a column-parallel rolling shutter mode. One discriminator per column and the digital data processing circuits are located on the same chip in a 3 mm wide area beneath the pixel matrix allowing for binary hit encoding. This area also contains the circuits for pedestal correction and the configuration memory, which is programmed via JTAG. The preprocessed digital data is read out via two 80 Mbit/s LVDS links per sensor, which stream their data continuously based on a low-level protocol.
Within the scope of this thesis, a readout concept of the CBM-MVD is proposed and studied based on the current MIMOSA sensor generation. The backbone of the system is formed by the Readout Controller boards (ROCs) featuring FPGA microchips and optical links. Several ROC prototypes are considered using the synergy with the HADES Experiment. Finally, the TRB3 board is selected as a possible candidate for the initial FAIR experiments. Furthermore, a highly scalable, hardware independent FPGA firmware is implemented in order to steer and read out multiple MIMOSA-26 sensors. The reconfigurable firmware is also designed with the support for future MIMOSA sensor generations. The free-streaming sensor data is deserialized and error-checked, prior to its transmission over a suitable network interface. In order to demonstrate the validity of the concept, a readout network similar to the HADES Data Acquisition (DAQ) system is developed. The ROC is tested on the HADES TRB2 boards and data is acquired using suitable MAPS add-on boards and the TrbNet protocol.
In the context of the CBM-MVD prototype project, a readout network with 12 MIMOSA-26 sensors has been prepared for an in-beam test at the CERN SPS facility. A comprehensive control system is designed comprising customized software tools. The subsequent in-beam test is used to validate the design choices. As a result, the system could be operated synchronously and dead-time free for several days. The readout network behavior in a realistic operating environment has been carefully studied with the outcome the the TrbNet based approach handles the MVD prototype setup without any difficulties. A procedure to keep the sensors synchronous even in case of a data overflow has been pioneered as well. After the beam test, improvements and conceptual changes to the readout systems are being addressed which allow an integration into the global CBM DAQ system.
The implementation of pump-probe experiments with ultrashort laser pulses enables the study of dynamical processes in atoms or molecules, which may provide a deeper inside in their physical origin. The application of this method to systems as nitrous oxide, which is not only a simple example for polyatomic molecules but which also plays a crucial role in the greenhouse effect, promises interesting and beneficial findings. This thesis presents, on the one hand, the technical extension of an existing experimental setup for high-harmonic generation (HHG) and ultra-fast laser physics by an extreme ultraviolet (XUV) spectrometer for the in-situ observation of the harmonic spectrum during ongoing measurements. The present setup enables the production of short laser pulse trains in the XUV spectral range with durations of a few hundred attoseconds (1 as = 10^−18 s) via HHG and supports to perform XUV-IR pump-probe experiments using the infrared (IR) driving field with durations of a few femtoseconds. Moreover, a reaction microscope is implemented, which enables the coincident detection of several charged particles emerging from an ionization or dissociation process and to reconstruct their full 3-D-momentum vectors. With this technique it is possible to perform time-resolved momentum spectroscopy of few-particle quantum systems. Here, the design and the calibration of the XUV spectrometer is presented as well as a first application to the analysis of experimental data by providing information on the produced photon energies. On the other hand, the results of an XUV-pump IR-probe measurement on nitrous oxide (N2O) are discussed. With the broad harmonic spectrum (∼ 17 − 45 eV) it is possible to address several states of the singly and doubly ionized cation. One reaction channel is the single ionization into a stable state of N2O+. Here, the coincidently measured photoelectron energies allow the observation of sidebands, which served to estimate the pulse durations of the involved XUV pulse trains as well as of the fundamental IR pulses. Additionally, single ionization of nitrous oxide can lead to a dissociation into a charged and a neutral fragment. The four respective dissociation channels are compared by presenting their branching ratios, kinetic energy release (KER) distributions and their dependencies on the time delay between pump and probe pulse. In the production of the dication, there are two competitive processes: direct double ionization considering photon energies above the double-ionization threshold, and autoionization of singly ionized and excited molecules in the case of photon energies near the double-ionization threshold. In both cases, the ionization leads to a Coulomb explosion into two charged fragments, where the N − N bond or the N − O bond may dissociate. The influence of the IR-probe field on the ionization yield and the KER was investigated for both dissociation channels and compared. In addition, the corresponding photoelectron energy spectra are presented, which show indications for autoionizing states being involved, and their dependence on the delay and the KER of the respective ions is analyzed.
Die vorliegende Arbeit befasst sich mit der Untersuchung einzelner chiraler Moleküle durch Koinzidenzmessungen. Ein Molekül wird chiral genannt, wenn es in zwei Varianten, sogenannten Enantiomeren auftritt, deren Strukturmodelle Spiegelbilder voneinander sind.
Da viele biologisch relevante Moleküle chiral sind, sind Methoden und Erkenntnisse dieses Gebiets von großer Bedeutung für Biochemie und Pharmazie. Bemerkenswert ist, dass in der Natur meist nur eines der beiden möglichen Enantiomere auftritt. Ob diese Wahl zufällig war, ob sie aufgrund der Anfangsbedingungen bei Entstehung des Lebens erfolgte, oder ob sie eine fundamentale Ursache hat, ist bisher ungeklärt. Seit der Entdeckung chiraler Molekülstrukturen in der zweiten Hälfte des 19. Jahrhunderts ist eine Vielzahl von Methoden entwickelt worden, um die beiden Enantiomere eines Moleküls zu unterscheiden und ihre Eigenschaften zu untersuchen. Aussagen über die mikroskopische Struktur (Absolutkonfiguration) können jedoch meist nur mithilfe theoretischer Modelle getroffen werden.
Der innovative Schritt der vorliegenden Arbeit besteht darin, eine in der Atomphysik entwickelte Technik zur Untersuchung einzelner mikroskopischer Systeme erstmals auf chirale Moleküle anzuwenden: Mit der sogenannten Cold Target Recoil Ion Momentum Spectroscopy (COLTRIMS) ist es möglich, einzelne Moleküle in der Gasphase mehrfach zu ionisieren und die entstandenen Fragmente (Ionen und Elektronen) zu untersuchen. Die gleichzeitige Detektion dieser Fragmente wird als Koinzidenzmessung bezeichnet.
Zunächst wurde das prototypische chirale Molekül CHBrClF mit einem Femtosekunden-Laserpuls mehrfach ionisiert, sodass alle fünf Atome als einfach geladene Ionen in einer sogenannten Coulomb-Explosion „auseinander fliegen“. Durch Messung der Impulsvektoren dieser Ionen konnte die mikroskopische Konfiguration einzelner Moleküle mit sehr hoher Zuverlässigkeit bestimmt werden. Somit eignet sich die Koinzidenzmethode auch dazu, die Anteile der rechts- bzw. linkshändigen Enantiomere in einer Probe zu bestimmen. Die Messungen an der verwendeten, racemischen Probe zeigen bei der Ionisation mit linear polarisiertem Licht im Rahmen der statistischen Unsicherheit wie erwartet eine Gleichverteilung der beiden Enantiomere.
In einem nachfolgenden Experiment konnte gezeigt werden, dass sich die Coulomb-Explosion auch mit einzelnen hochenergetischen Photonen aus einer Synchrotronstrahlungsquelle realisieren lässt. Für beide Ionisationsmechanismen – am Laser und am Synchrotron - wurden mehrere Fragmentationskanäle untersucht. Im Hinblick auf die Erweiterung der Methode hin zu komplexeren, biologisch relevanten Molekülen ist es entscheidend zu wissen, inwieweit sich die Händigkeit bestimmen lässt, wenn nicht alle Atome des Moleküls als atomare Ionen detektiert werden. Hierbei stellte sich heraus, dass auch molekulare Ionen zur Bestimmung der Absolutkonfiguration herangezogen werden können. Eine signifikante Steigerung der Effizienz konnte für den Fall demonstriert werden, dass nicht alle Fragmente aus der Coulomb-Explosion des Moleküls detektiert wurden – hier lassen sich allerdings nur noch statistische Aussagen über die Absolutkonfiguration und die Häufigkeit der beiden Enantiomere treffen.
Um die Grenzen der Methode in Bezug auf die Massenauflösung zu testen, wurden isotopenchirale Moleküle, d.h. Moleküle, die nur aufgrund zwei verschiedener Isotope chiral sind, untersucht. Auch hier ist eine Trennung der Enantiomere möglich, wenn auch mit gewissen Einschränkungen.
Ein wichtiges Merkmal chiraler Moleküle ist das unterschiedliche Verhalten der Enantiomere bei Wechselwirkung mit zirkular polarisierter Strahlung. Diese Asymmetrie wird Zirkulardichroismus genannt. Die koinzidente Untersuchung von Ionen und Elektronen aus der Fragmentation eines Moleküls eröffnet neue Möglichkeiten für die Untersuchung des Dichroismus. So können die Impulsvektoren der Ionen mit bekannten Asymmetrien in der Elektronenverteilung (Photoelektron-Zirkulardichroismus) verknüpft werden, was zu einem besseren Verständnis der Wechselwirkung elektromagnetischer Strahlung mit chiralen Molekülen führen kann.
In dieser Arbeit wurde nach Asymmetrien in der Winkelverteilung sowohl der Ionen als auch der Elektronen nach der Ionisation von CHBrClF und Propylenoxid (C3H6O) mit zirkular polarisierter Synchrotronstrahlung gesucht. In den durchgeführten Messungen konnte kein zweifelsfreier Nachweis für einen Dichroismus bei den verwendeten experimentellen Bedingungen erbracht werden. Technische und prinzipielle Limitierungen der Methode wurden diskutiert und Verbesserungsvorschläge für zukünftige Messungen genannt.
Mit der erfolgreichen Bestimmung der Absolutkonfiguration und der prinzipiellen Möglichkeit, Asymmetrien in zuvor nicht zugänglichen Messgrößen zu untersuchen, legt diese Arbeit den Grundstein für die Anwendung der Koinzidenzspektroskopie auf Fragestellungen der Stereochemie.
Cryo-electron tomography (CET) is a unique technique to visualize biological objects under near-to-native conditions at near-atomic resolution. CET provides three-dimensional (3D) snapshots of the cellular proteome, in which the spatial relations between macromolecular complexes in their near native cellular context can be explored. Due to the limitation of the electron dose applicable on biological samples, the achievable resolution of a tomogram is restricted to a few nanometers, higher resolution can be achieved by averaging of structures occurring in multiples. For this purpose, computational techniques such as template matching, sub-tomogram averaging and classification are essential for a meaningful processing of CET data.
This thesis introduces the techniques of template matching and sub-tomogram averaging and their applications on real biological data sets. Subsequently, the problem of reference bias, which restricts the applicability of those techniques, is addressed. Two methods that estimate the reference bias in Fourier and real space are demonstrated. The real space method, which we have named the “M-free” score, provides a reliable estimation of the reference bias, which gives access to the reliability of the template matching or sub-tomogram averaging process. Thus, the “M-free” score makes those approaches more applicable to structural biology. Furthermore, a classification algorithm based on Neural Networks (NN) called “KerDenSOM3D” is introduced, which is implemented in 3D and compensates for the missing-wedge. This approach helps extracting different structural states of macromolecular complexes or increasing the class purity of data sets by eliminating outliers. A comprehensive comparison with other classification methods shows superior performance of KerDenSOM3D.
Das Strahldynamikdesign für den MYRRHA-Injektor wurde im Hinblick auf eine hohe Zuverlässigkeit und Verfügbarkeit, sowie eine verbesserte Strahlausgangsemittanz, neu entwickelt und erfüllt nun die Anforderungen des Kernreaktors.
In der statistischen Fehleranalyse zeigt sich die Strahldynamik der CH-Sektion als äußerst robust und liefert selbst unter pessimistischen Fehlerannahmen eine Transmission von über 99,9 %.
Das neue Injektorkonzept bietet wesentliche Vorteile gegenüber dem in „MAX Referenzdesign 2012“ vorgestellten Injektordesign und wird als neues „MAX Referenzdesign 2014“ für den MYRRHA-Injektor verwendet. Die guten strahldynamischen Eigenschaften des neuen Injektordesigns konnten in Vergleichsrechnungen mit TraceWin am IN2P3@CNRS1 (Institut National de Physique Nucléaire et de Physique des Particules @ Centre National de la Recherche Scientifique, Orsay, Frankreich) bestätigt werden.
Neben der Strahldynamik wurde das HF-Design für die benötigten Beschleunigerkavitäten entwickelt und ebenfalls für eine hohe Zuverlässigkeit und Verfügbarkeit optimiert. Das HF-Design der CH-Strukturen ist für eine größtmögliche Ausfallsicherheit auf den Betrieb mit niedrigen elektrischen Feldgradienten, weit unterhalb der technischen Leistungsgrenzen und Möglichkeiten der jeweiligen Kavität, ausgelegt.
The ab-initio molecular dynamics framework has been the cornerstone of computational solid state physics in the last few decades. Although it is already a mature field it is still rapidly developing to accommodate the growth in solid state research as well as to efficiently utilize the increase in computing power. Starting from the first principles, the ab-initio molecular dynamics provides essential information about structural and electronic properties of matter under various external conditions. In this thesis we use the ab-initio molecular dynamics to study the behavior of BaFe2As2 and CaFe2As2 under the application of external pressure. BaFe2As2 and CaFe2As2 belong to the family of iron based superconductors which are a novel and promising superconducting materials. The application of pressure is one of two key methods by which electronic and structural properties of iron based superconductors can be modified, the other one being doping (or chemical pressure). In particular, it has been noted that pressure conditions have an important effect, but their exact role is not fully understood. To better understand the effect of different pressure conditions we have performed a series of ab-initio simulations of pressure application. In order to apply the pressure with arbitrary stress tensor we have developed a method based on the Fast Inertial Relaxation Engine, whereby the unit cell and the atomic positions are evolved according to the metadynamical equations of motion. We have found that the application of hydrostatic and c axis uniaxial pressure induces a phase transition from the magnetically ordered orthorhombic phase to the non-magnetic collapsed tetragonal phase in both BaFe2As2 and CaFe2As2. In the case of BaFe2As2, an intermediate tetragonal non-magnetic tetragonal phase is observed in addition. Application of the uniaxial pressure parallel to the c axis reduces the critical pressure of the phase transition by an order of magnitude, in agreement with the experimental findings. The in-plane pressure application did not result in transition to the non-magnetic tetragonal phase and instead, rotation of the magnetic order direction could be observed. This is discussed in the context of Ginzburg-Landau theory. We have also found that the magnetostructural phase transition is accompanied by a change in the Fermi surface topology, whereby the hole cylinders centered around the Gamma point disappear, restricting the possible Cooper pair scattering channels in the tetragonal phase. Our calculations also permit us to estimate the bulk moduli and the orthorhombic elastic constants of BaFe2As2 and CaFe2As2.
To study the electronic structure in systems with broken translational symmetry, such as doped iron based superconductors, it is necessary to develop a method to unfold the complicated bandstructures arising from the supercell calculations. In this thesis we present the unfolding method based on group theoretical techniques. We achieve the unfolding by employing induced irreducible representations of space groups. The unique feature of our method is that it treats the point group operations on an equal footing with the translations. This permits us to unfold the bandstructures beyond the limit of translation symmetry and also formulate the tight-binding models of reduced dimensionality if certain conditions are met. Inclusion of point group operations in the unfolding formalism allows us to reach important conclusions about the two versus one iron picture in iron based superconductors.
And finally, we present the results of ab-initio structure prediction in the cases of giant volume collapse in MnS2 and alkaline doped picene. In the case of MnS2, a previously unobserved high pressure arsenopyrite structure of MnS2 is predicted and stability regions for the two competing metastable phases under pressure are determined. In the case of alkaline doped picene, crystal structures with different levels of doping were predicted and used to study the role of electronic correlations.