Institutes
Refine
Year of publication
Document Type
- Doctoral Thesis (211) (remove)
Has Fulltext
- yes (211)
Is part of the Bibliography
- no (211)
Keywords
- Beschleuniger (3)
- HADES (3)
- Heavy Ion Collisions (3)
- CBM (2)
- CBM Experiment (2)
- Control System (2)
- Dissertation (2)
- EPICS (2)
- FAIR (2)
- Flow (2)
Institute
- Physik (211)
- MPI für Biophysik (1)
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
This thesis is structured into 7 chapters:
• Chapter 2 gives an overview of the ultrashort high intensity laser interaction with matter. The laser interaction with an induced plasma is described, starting from the kinematics of single electron motion, followed by collective electron effects and the ponderamotive motion in the laser focus and the plasma transparency for the laser beam. The three different mechanisms prepared to accelerate and propagate electrons through matter are discussed. The following indirect acceleration of protons is explained by the Target Normal Sheath Acceleration (TNSA) mechanism. Finally some possible applications of laser accelerated protons are explained briefly.
• Chapter 3 deals with the modeling of geometry and field mapping of magnetic lens. Initial proton and electron distributions, fitted to PHELIX measured data are generated, a brief description of employed codes and used techniques in simulation is given, and the aberrations at the solenoid focal spot is studied.
• Chapter 4 presents a simulation study for suggested corrections to optimize the proton beam as a later beam source. Two tools have been employed in these suggested corrections, an aperture placed at the solenoid focal spot as energy selection tool, and a scattering foil placed in the proton beam to smooth the radial energy beam profile correlation at the focal spot due to chromatic aberrations. Another suggested correction has been investigated, to optimize the beam radius at the focal spot by lens geometry controlling.
• Chapter 5 presents a simulation study for the de-neutralization problem in TNSA caused by the fringing fields of pulsed magnetic solenoid and quadrupole. In this simulation, we followed an electrostatic model, wherethe evolution of both, self and mutual fields through the pulsed magnetic solenoid could be found, which is not the case in the quadrupole and only the growth of self fields could be found. The field mapping of magnetic elements is generated by the Matlab program, while the TraceWin code is employed to study the tracking through magnetic elements.
• Chapter 6 describes the PHELIX laser parameters at GSI with chirp pulse amplification technique (CPA), and Gafchromic Radiochromic film RCF) as a spatial energy resolver film detector. The results of experiments with laser proton acceleration, which were performed in two experimental areas at GSI (Z6 area and PHELIX Laser Hall (PLH)), are presented in section 6.3.
• Chapter 7 includes the main results of this work, conclusions and gives a perspective for future experimental activities.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
In der Experimentierhalle der Physik am Campus Riedberg der Goethe – Universität wird gegenwärtig die Beschleunigeranlage FRANZ aufgebaut. FRANZ steht für Frankfurter Neutronenquelle am Stern-Gerlach-Zentrum. Die Anlage bietet vielfältige Experimentiermöglichkeiten in der Untersuchung intensiver, gepulster Protonenstrahlen. Ein Forschungsschwerpunkt an den sekundären Neutronenstrahlen sind Messungen zur nuklearen
Astrophysik. Die Neutronen werden durch einen 2 MeV Protonenstrahl mittels der Reaktion 7Li (p, n) 7Be erzeugt. Die geplanten Experimente erfordern sowohl eine hier weltweit erstmals realisierte Pulsrepetitionsrate von bis zu 250 kHz bei Pulsströmen im 100 mA – Bereich als auch eine extreme Pulskompression auf eine Nanosekunde bei dann auftretenden Pulsströmen im Ampere – Bereich. Daneben ist auch ein Dauerstrich – Strahlbetrieb im mA – Strombereich möglich. Auch viele einzelne Beschleunigerkomponenten wie die Ionenquelle, der Chopper zur Pulsformung, die hochfrequent gekoppelte RFQ-IH-Kombination, der Rebuncher in Form einer CH – Struktur und der Bunchkompressor sind Neuentwicklungen. Mittlere Strahlleistungen von bis zu 24 kW treten im Niederenergiestrahltransportbereich auf, da die Ionenquelle grundsätzlich im Dauerstrich zu betreiben ist, auch bei Hochstrom mit hohen Pulsrepetitionsraten. Der Personen- und Geräteschutz spielt damit auch eine wesentliche Rolle bei der Auslegung des Kontrollsystems für FRANZ. Der Aufbau von FRANZ und seine wesentlichen Komponenten werden in Kapitel 2 erläutert. Die vielen unterschiedlichen Komponenten wie Hochspannungsbereich, Magneten, Hochfrequenzbauteile und Kavitäten, Vakuumbauteile, Strahldiagnose und Detektoren machen plausibel, dass auch das Kontrollsystem für eine solche Anlage speziell ausgelegt werden muss. In Kapitel 4 werden zum Vergleich die Konzepte zur Steuerung und Regelung aktueller, großer Beschleunigerprojekte aufgezeigt, nämlich für die „European Spallation Source ESS“ und für die „Facility for Antiproton and Ion Research FAIR“. In der vorliegenden Arbeit wurde die Ionenquelle als komplexe Beschleunigerkomponente ausgewählt, um Entwicklungen zur Steuerung und Regelung durchzuführen und zu testen. Zum Anfahren und Betreiben der Ionenquelle wurde ein Flussdiagramm (Abb. 5.15) entwickelt und realisiert. Im Detail wurden Untersuchungen zur Abhängigkeit der Heizkathodenparameter von der Betriebsdauer gemacht. Daraus konnte ein Algorithmus zur Vorhersage eines rechtzeitigen Filamentaustausches abgeleitet werden. Weiterhin konnte die Nachregelung des Kathodenheizstromes automatisiert werden, um damit die Bogenentladungsspannung innerhalb eines Intervalls von ± 0.5 V zu stabilisieren. Das Anfahren des Filamentstroms wurde ebenfalls automatisiert. Dazu wird die Vakuumdruckänderung in Abhängigkeit der Filamentstromerhöhung gemessen, ausgewertet und daraus der nächste erlaubte Stromerhöhungsschritt abgeleitet. Auf diese Weise wird der Betriebszustand schneller und kontrollierter erreicht als bei manuellem Hochfahren. Das Ziel eines unbemannten Ionenquellenbetriebs ist damit näher gerückt. In einem ersten Test zur Komponentensteuerung und zur Datenaufnahme wurde ein Ionenstrahl extrahiert und durch den ersten Fokussierungsmagneten – einen Solenoiden – transportiert. Es wurde der Erregungsstrom des Solenoiden sowie die Strahlenergie automatisch durchgefahren, die Daten abgespeichert und daraus ein Kontourplot zum gemessenen Strahlstrom hinter der Fokussierlinse erstellt (Abb. 5). Die vorliegende Arbeit beschäftigt sich nur mit den „langsamen“ Steuerungs- und Regelungsprozessen, während die schnellen Prozesse im Hochfrequenzregelungssystem unabhängig geregelt werden. Neben der Überwachung des Betriebszustandes aller Komponenten werden auch alle für den Service und die Personensicherheit benötigten Daten weggeschrieben. Das System basiert auf MNDACS (Mesh Networked Data Acquisition and Control System) und ist in JAVA geschrieben. MNDACS besteht aus einem Kernel, welcher die Komponententreiber-Software sowie den Netzwerkserver und das graphische Netzwerkinterface (GUI) betreibt. Weterhin gehört dazu das Driver Abstraction Layer (DAL), welches den Zugang zu weiteren Computern oder zu lokalen Treibern ermöglicht. CORBA stellt die Middleware für Netzwerkkommunikation dar. Dadurch wird Kommunikation mit externer Software geregelt, weiterhin wird die Umlegung von Kommunikation im Fall von Leitungsunterbrechungen oder einem lokalen Computerabsturz festgelegt. Es gibt bei FRANZ zwei Kontrollebenen: Über Ethernet läuft die „High Level Control“ und die Datenverarbeitung. Über die „Low Level Control“ läuft das Interlock – und Sicherheitssystem. Die Netzwerkverbindungen laufen über 1 Gb Ethernet Links, womit ein schneller Austausch auch bei lokalen Netzwerkstörungen noch möglich ist. Um bei Stromausfällen das Computersystem am Laufen zu halten, wurde im Rahmen dieser Arbeit ein „Uninterruptable Power Supply“ UPS beschafft und erfolgreich am Hochspannungsterminal getestet.
Die Schwerpunkte dieser Arbeit sind elektrische, stationäre und zeitaufgelöste Transportmessungen an EuB6 sowie die Weiterentwicklung von Messmethoden und Analyseverfahren der Fluktuationsspektroskopie. Durch die Verwendung von
modernen Computern und Datenerfassungskarten konnten die Messmethoden effektiver eingesetzt werden.
Die ersten beiden Kapitel stellen die Grundlagen dar, die für diese Arbeit von Bedeutung sind. Der erste Teil dieser Arbeit wurde der Weiterentwicklung der bereits bekannten Messmethoden unter Verwendung einer schnellen Datenerfassungskarte gewidmet. Im Gegensatz zur Verwendung eines Signalanalysators bietet die Karte die Möglichkeit, auf die Rohdaten im Zeitraum zuzugreifen und sie anschließend mit einer selbst programmierten Software auszuwerten. Die technischen Methoden und der Aufbau der Software wurden in den Kapiteln 3 und 4 vorgestellt. Durch das Ersetzen des Signalanalysators kann bis zu 50% der Messzeit eingespart werden.
Durch die Code-Erweiterung kann bereits nach zwei hintereinander gemessenen Spektren vorläufig bei tiefen Frequenzen ausgewertet und somit frühzeitig entschieden werden, ob eine längere Messzeit aussichtsreich ist. Außerdem wird durch Verwendung der Code-Erweiterung eine sehr viel höhere Spektrendichte (Anzahl von Messpunkten) erreicht. Da im Gegensatz zum Signalanalysator alle gemessenen Spektren gespeichert werden, können in jeder Messung die Spektren auf ihre Korrelation (Korrelationskoeffizient und Zweites Spektrum) hin untersucht werden, ohne zusätzliche Messzeit zu benötigen.
Der zweite Teil dieser Arbeit befasst sich mit den elektrischen Transporteigenschaften von EuB6 und dem Verständnis der Kopplung zwischen Ladungs- und magnetischen Freiheitsgraden. Mittels Widerstands- und nichtlinearer Transportmessungen sowie Fluktuationsspektroskopie wurden Hypothesen von anderen Wissenschaftlern systematisch verifiziert, sowie neue, weiterführende Erkenntnisse gewonnen.
Direkte experimentelle Hinweise für die Phasenseparation sowie das Auftreten von Perkolation aus Transportmessungen fehlten bisher. In dieser Arbeit wurden daher systematisch die elektrischen Transportseigenschaften des Systems in Abhängigkeit von der Temperatur und vom Magnetfeld untersucht. Mittels Fluktuationsspektroskopie konnte erstmals ein direkter Hinweis auf perkolatives Verhalten in den Transporteigenschaften beobachtet werden. Ein starkes nichtlineares Transportsignal (dritter harmonischer Widerstand, DHW) im Bereich von TMI und TC ist eine Signatur einer räumlich inhomogenen Stromverteilung auf der Mikroskala und ein weiterer deutlicher Hinweis auf magnetisch induzierte elektronische Phasenseparation. Insbesondere tritt nichtlinearer Transport bei H = 0 im FM Bereich auf und kann im PM-Bereich bei T > TMI durch externe Magnetfelder induziert werden.
Eine möglichst realistische Abschätzung von Strahlenschäden ist von entscheidender Bedeutung im Strahlenschutz und für die Strahlentherapie. Die primären Strahlenschäden an der DNS werden heute mit Monte-Carlo-Codes berechnet. Diese Codes benötigen möglichst genaue Fragmentierungsquerschnitte verschiedenster biomolekularer Systeme als Eingangsparameter. Im Rahmen der vorliegenden Arbeit wurde ein Experiment aufgebaut, welches die Bestimmung der Fragmentierungsquerschnitte von Biomolekülen ermöglicht. Die einzelnen Baugruppen des Aufbaus wurden vor dem Beginn des Experimentes bezüglich ihrer Eigenschaften, die die Genauigkeit der Messergebnisse beeinflussen können, charakterisiert. Die Resultate dieser Experimente werden als Eingangsdaten für die Berechnung von primären strahleninduzierten Schäden in der DNS mit Hilfe von Monte-Carlo-Codes eingesetzt.
Eine besondere Herausforderung stellte die Präparation eines Überschallgasstrahls für biomolekulare Substanzen dar. Für die Präparation müssen die Targetsubstanzen zunächst in die Gasphase überführt werden. Im Falle von Biomolekülen ist diese Überführung auf Grund ihrer niedrigen Dampfdrücke bei Raumtemperatur und chemischen Reaktivität mit technischen Problemen verbunden. Die Probleme wurden mittels einer speziellen Konstruktion der Präparationseinrichtung, welche eine direkte Einleitung der Probensubstanzen in die vom Trägergas durchströmte Mischkammer ermöglicht, gelöst. Für die Genauigkeit der gemessenen Fragmentierungsquerschnitte spielen mehrere Faktoren eine Rolle. Neben dem Bewegungsprofil des Überschallgasstrahls, den kinetischen Energien der Fragmentionen und den ionenoptischen Eigenschaften des Flugzeitspektrometers beeinflusst die geometrische Beschaffenheit der Detektionszone maßgeblich die Genauigkeit des Experimentes. Die Position und Ausdehnung des sichtbaren Volumens sind nicht nur durch den Überlappungsbereich zwischen dem Elektronen- und dem Überschallgasstrahl bestimmt, sondern hängen auch von der kinetischen Energie der Fragmente ab. Für dessen Ermittlung wurden daher auch die Trajektorien der Fragmente simuliert. Bei den Experimenten an der PTB-Apparatur ist die frei wählbare Zeitdifferenz zwischen dem Auslösen eines Elektronenpulses und dem Absaugen der Fragmentionen ein wichtiger Messparameter. Ihr Einfluss auf die Messergebnisse wurde ebenfalls neben der Nachweiswahrscheinlichkeit des verwendeten Ionendetektors untersucht. Die Kalibrierung der Flugzeitspektren, d. h. die Umwandlung der Flugzeitspektren in Massenspektren erfolgte anhand der bekannten Flugzeitspektren von Edelgasen und Wasserstoff.
Nach der Charakterisierung der Einflussfaktoren und Kalibrierung der Flugzeitspektren wurden die energieabhängigen Fragmentierungsquerschnitte für Elektronenstoß von mehreren organischen Molekülen, darunter die von Modellmolekülen für die DNS-Bausteine gemessen. Die Flugzeitspektren von THF wurden mit der PTB-Apparatur für einige kinetische Energien der Elektronen in Abhängigkeit von der Zeitdifferenz zwischen dem Auslösen des Elektronenpulses und dem Starten der Analyse durchgeführt. Messungen von Pyrimidin wurden sowohl an der PTB-Apparatur als auch mit COLTRIMS durchgeführt. Die mit COLTRIMS gewonnenen Ergebnisse liefern wichtige Zusatzinformationen über die Fragmentierungsprozesse. COLTRIMS ermöglicht die Messung der zeitlichen Korrelationen zwischen den auftretenden Fragmentionen und damit tiefere Einblicke in die bei der Entstehung der Fragmente beteiligten Reaktionskanäle. Der Vorteil der PTB-Apparatur besteht darin, dass die relativen Auftrittswahrscheinlichkeiten aller Fragmentionen genauer bestimmt werden können.
Mit immer komplexeren Experimenten erhöhen sich die Anforderungen an die Detektoren und diese Arbeit ist ein neuer Beitrag für eine weiterentwickelte technologische Lösung. In der vorliegenden Dissertation wurde eine nichtinvasive optische Strahldiagnose für intensive Ionenstrahlen in starken Magnetfeldern entwickelt. Das optische System besteht aus miniaturisierten Einplatinen CMOS-Kameras. Sowohl die hardwareseitige Entwicklung als auch die softwareseitige Implementierung der Algorithmen zur Kamerakalibrierung, Netzwerksteuerung und Strahlrekonstruktion wurden in dieser Arbeit entwickelt. Die Leistungsstärke dieses neuartigen Diagnosesystems wurde dann experimentell an einem Teststand demonstriert. Dabei wurde das optische System ins Vakuumstrahlrohr eingebettet. Ein Wasserstoffionenstrahl mit einer Energie von 7keV bis 10keV und einem Strahlstrom bis 1mA wurde in einer Stickstoffatmosphäre bis 1E-5 mbar untersucht. Dabei wurde der Ionenstrahl entlang des Strahlrohres des Toroidsegmentmagnetes mit einer Bogenlänge von 680mm mit einem xy-Kamerasystem beobachtet.
Der Strahlschwerpunkt und die Breite des Strahlprofils wurden im Ortsraum rekonstruiert. Die analytisch berechnete und in anderen Arbeiten simulierte Gyrationsbewegung sowie der RxB-Drift des Strahlschwerpunktes konnte experimentell bestätigt werden.
Development of the timing system for the Bunch-to-Bucket transfer between the FAIR accelerators
(2017)
The FAIR project is aiming at providing high-energy beams of ions of all elements from hydrogen to uranium, antiprotons and rare isotopes with high intensities. The existing accelerator facility of GSI and the future FAIR facility employ a variety of circular accelerators like heavy ion synchrotrons (SIS18 and SIS100) and storage rings (ESR, CRYRING, CR and HESR) for the preparation of secondary beams and experiments. Bunches are required to be transferred into rf buckets among GSI and FAIR ring accelerators for different purposes. Without the proper transfer, the beam will be subject to various beam quality deterioration and even to beam losses. Hence, the proper bunch-to-bucket (B2B) transfer between two rings is of great importance for FAIR and is the topic, which has been investigated in this thesis.
These circular accelerators of GSI and FAIR have different ratios in their circumference. For example, the circumference ratio between SIS100 and SIS18 is an integer and between SIS18 and ESR is close to an integer and between CR and HESR is far away from an integer. The ring accelerators are connected via a complicated system of beam transfer lines, targets for the secondary particle production and the high energy separators mentioned above. For FAIR, not only the primary beams are required to be transferred from one ring to another, but also the secondary beams, e.g. the antiproton or rare isotope beams produced by the antiproton (pbar) target, the fragment separator (FRS) or the superconducting fragment separator (Super-FRS). An important topic for this system of accelerators is the proper transfer of beam between the different circular accelerators. Bunches of one ring must be transferred into buckets of another ring within an upper bound time constraint (e.g. 10 ms for most FAIR use cases) and with an acceptable B2B injection center mismatch +-1 degree for most FAIR use cases). Hence, a flexible FAIR B2B transfer system is required to realize the different complex B2B transfers between the FAIR rings in the future. In the focus of the system development and of this thesis is the transfer from SIS18 to SIS100, which can be tested at GSI on the transfer from SIS18 to ESR and from ESR to CRYRING. The system is based on the existing technical basis at GSI, the low-level radio frequency (LLRF) system and the FAIR control system. It coordinates with the Machine Protection System (MPS), which protects SIS100 and subsequent accelerators and experiments from damage caused by high intensity primary beams in case of malfunctioning. Besides, it indicates the beam status and the actual beam injection time for the beam instrumentation and diagnostics.
The conceptual realization of the FAIR B2B transfer system was introduced in this thesis for the first time. It achieves the most FAIR B2B transfers with a tolerable B2B injection center mismatch (e.g. +-1 degree) and within an upper bound time (e.g. 10 ms). It supports two synchronization methods, the phase shift and frequency beating methods. It is flexible to support the beam transfer between two rings with different ratios in their circumference and several B2B transfers running at the same time, e.g. the B2B transfer from SIS18 to SIS100 and at the same time the B2B transfer from ESR to CRYRING. It is capable to transfer beam of different ion species from one machine cycle to another and to transfer beams between two rings via the FRS, the pbar target and the Super-FRS. It allows various complex bucket filling pattern. In addition, it coordinates with the MPS system, which protects the SIS100 and subsequent accelerators or experiments from beam induced damage.
A list of criteria for the preservation of beam qualities during the rf frequency modulation of the phase shift method was analyzed. As an example the beam reaction on three different rf frequency modulation examples were analyzed for SIS18 beams. According to the beam dynamic analysis, there is a maximum value for the rf frequency modulation. The first derivative of the rf frequency modulation must be continuous and small enough and the second derivative must be small enough.
In addition to the analysis from the viewpoint of beam dynamics, two test setups were built. The first test setup was used to characterize the FAIR timing network – white rabbit network for the B2B transfer. In the second test setup, the firmware of the FAIR B2B transfer system was evaluated, which was running on the soft CPU, LatticeMico32, of the Scalable Control Unit - the FAIR standard Front End Controller. Besides, the boundary conditions of the different trigger scenarios of the SIS18 extraction and SIS100 injection kicker magnets were investigated. Finally, the application of the FAIR B2B transfer system for all FAIR use cases was demonstrated.
The dissertation plays a significant important role for the realization of the FAIR B2B transfer system and the further practical application of the system to all FAIR use cases.
The Compressed Baryonic Matter (CBM) is one of the core experiments at the future Facility for Anti-proton and Ion Research (FAIR), Darmstadt, Germany. Its goal is to investigate nuclear matter characteristics at high net-baryon densities and moderate temperatures. The Silicon Tracking System (STS) is a central detector system of CBM.
It is placed inside a 1Tm magnet and operated at a temperature of about −10 °C to keep radiation-induced bulk current in the 300μm double-sided microstrip silicon sensors low. The design of the STS aims to minimize the material budget in the detector acceptance (2.5° < θ < 25°). In order to do so, the readout electronics is placed outside the active area, and the analog signals are transported via ultra-thin micro-cables. The STS comprises eight tracking stations with 876 modules. Each module is assembled on a carbon fiber ladder, which is subsequently mounted in the C-shaped aluminum frame.
The scope of the thesis focused on developing a modular control system framework that can be implemented for different sizes of experimental setups. The developed framework was used for setups that required a remote operation, like the irradiation of the powering modules for the front-end electronics (FEE), but also in laboratory-based setups where the automation and archiving were needed (thermal cycling of the STS electronics).
The low voltage powering modules will be placed in the vicinity of the experiment, therefore they will experience a total dose of up to 40mGy over the 10 years of STS lifetime.
To estimate the effects of the radiation on the low-voltage module performance, a dedicated irradiation campaign took place. It aimed at estimating the rate of radiation induced soft errors, that lead to the switch off of the FEE.
Regular power cycles of multiple front-end boards (FEBs) pose a risk to the experiment operation. Firstly, such behavior could negatively influence the physics performance but also have deteriorating effects on the hardware. It was further assessed what are the limitations of the FEBs with respect to the thermal cycling and the mechanical stress. The results served as an indication of possible failure modes of the FEB at the end of STS lifetime. Failure modes after repeated cycles and potential reasons were determined (e.g., Coefficient of Thermal Expansion (CTE) difference between the materials).
Due to the conditions inside the STS efficient temperature and humidity monitoring and control are required to avoid icing or water condensation on the electronics or silicon sensors. The most important properties of a suitable sensor candidate are resilience to the magnetic field, ionizing radiation tolerance, and fairly small size.
A general strategy for ambient parameters monitoring inside the STS was developed, and potential sensor candidates were chosen. To characterize the chosen relative humidity sensors the developed control framework was introduced. A sampling system with a ceramic sensor and Fiber Optic Sensors (FOS) were identified as reliable solutions for the distributed sensing system. Additionally, the industrial capacitive sensors will be used as a reference during the commissioning.
Two different designs of FOS were tested: a hygrometer and 5 sensors multiplexed in an array. The FOS hygrometer turned out to be a more reliable solution. One of the possible reasons for a worse performance is a relatively low distance between the subsequent sensors (15 cm) and a thicker coating. The results obtained from the time response study pointed out that the thinner coating of about 15μm should be a good compromise between the humidity sensitivity and the time response.
The implementation of the containerized-based control system framework for the mSTS is described in detail. The deployed EPICS-based framework proved to be a reliable solution and ensured the safety of the detector for almost 1.5 years. Moreover, the data related to the performance of the detector modules were analyzed and significant progress in the quality of modules was noted. Obtained data was also used to estimate the total fluence, which was based on the leakage current changes.
The developed framework provided a unique opportunity to automate and control different experimental setups which provided crucial data for the STS. Furthermore, the work underlines the importance of such a system and outlines the next steps toward the realization of a reliable Detector Control System for STS.