Medizin
Refine
Year of publication
Document Type
- Article (135) (remove)
Has Fulltext
- yes (135) (remove)
Is part of the Bibliography
- no (135)
Keywords
- particulate matter (6)
- environmental tobacco smoke (5)
- prevalence (5)
- Gender (4)
- Kinematic analysis (4)
- MSD (4)
- bibliometry (4)
- Citation analysis (3)
- Density equalizing mapping (3)
- Knowledge (3)
Background: There are several ways to conduct a job task analysis in medical work environments including pencil-paper observations, interviews and questionnaires. However these methods implicate bias problems such as high inter-individual deviations and risks of misjudgement. Computer-based observation helps to reduce these problems. The aim of this paper is to give an overview of the development process of a computer-based job task analysis instrument for real-time observations to quantify the job tasks performed by physicians working in different medical settings. In addition reliability and validity data of this instrument will be demonstrated.
Methods: This instrument was developed in consequential steps. First, lists comprising tasks performed by physicians in different care settings were classified. Afterwards content validity of task lists was proved. After establishing the final task categories, computer software was programmed and implemented in a mobile personal computer. At least inter-observer reliability was evaluated. Two trained observers recorded simultaneously tasks of the same physician.
Results: Content validity of the task lists was confirmed by observations and experienced specialists of each medical area. Development process of the job task analysis instrument was completed successfully. Simultaneous records showed adequate interrater reliability.
Conclusion: Initial results of this analysis supported the validity and reliability of this developed method for assessing physicians' working routines as well as organizational context factors. Based on results using this method, possible improvements for health professionals' work organisation can be identified.
Introduction: Curare is one of the best-examined neurotoxins of the world, which has empirically been used for centuries by American Indigenes. Research on curare has been performed much later, a global scientometric analysis on curare research or its derivates does not yet exist. This bibliometric analysis is part of the global NewQis-project and should illuminate both toxic and historic issues of research on curare.
Methods: The ISI Web of Science was searched for data covering 1900 to 2013 using a term which included as many original articles on curare as possible. 3,867 articles were found and analyzed for common bibliometric items such as the number of citations, language of the articles or the (modified) Hirsch-Index (h-index). Results are illustrated utilizing modern density equalizing map projections (DEMP) or beam diagrams.
Results: Most publications were located in North America and Europe. The USA has the highest number of publications as well as the highest h-index. The number of publications overall rose until the late 1990s and later decreased. Furthermore, sudden increases of research activity are ascribable to historic events, like the first use of curare as muscle relaxant during surgery.
Discussion: This scientometric analysis of curare research reflects several tendencies as previously seen in other bibliometric investigations, i.e. the scientific quality standard of North America and Europe. Research on curare decreased however, due to the declining attention towards this muscle relaxant. This work exemplifies also how scientometric methods can be used to illuminate historic circumstances immediately stimulating scientific research.
Background: How a dentist works, such as the patterns of movements performed daily, is also largely affected by the workstation Dental tasks are often executed in awkward body positions, thereby causing a very high degree of strain on the corresponding muscles. The objective of this study is to detect those dental tasks, during which awkward postures occur most frequently. The isolated analysis of static postures will examine the duration for which these postures are maintained during the corresponding dental, respectively non-dental, activities.
Methods: 21 (11f/10 m) dentists (age: 40.1 ± 10.4 years) participated in this study. An average dental workday was collected for every subject. To collect kinematic data of all activities, the CUELA system was used. Parallel to the kinematic examination, a detailed computer-based task analysis was conducted. Afterwards, both data sets were synchronized based on the chronological order of the postures assumed in the trunk and the head region. All tasks performed were assigned to the categories "treatment" (I), "office" (II) and "other activities" (III). The angle values of each body region (evaluation parameter) were examined and assessed corresponding to ergonomic standards. Moreover, this study placed a particular focus on static positions, which are held statically for 4 s and longer.
Results: For "treatment" (I), the entire head and trunk area is anteriorly tilted while the back is twisted to the right, in (II) and (III) the back is anteriorly tilted and twisted to the right (non-neutral position). Static positions in (I) last for 4–10s, static postures (approx. 60%) can be observed while in (II) and (III) in the back area static positions for more than 30 s are most common. Moreover, in (II) the back is twisted to the right for more than 60 s in 26.8%.
Conclusion: Awkward positions are a major part of a dentists’ work. This mainly pertains to static positions of the trunk and head in contrast to "office work." These insights facilitate the quantitative description of the dentist profession with regard to the related physical load along with the health hazards to the musculoskeletal system. Moreover, the results allow for a selective extraction of the most unfavorable static body positions that dentists assume for each of the activities performed.
BACKGROUND: Toxoplasmosis endangers the unborn child if its infectious agent--toxoplasma gondii--is transmitted transplacentally during pregnancy. Although this condition occurs in all parts of the world and represents a major public health burden, no detailed knowledge on the global research architecture of congenital toxoplasmosis is available thus far. Hence, it was the aim of this study to assess the related global research activity over the past 110 years.
METHODS: We employed the NewQIS platform, which combines established scientometric and socioeconomic analysis tools with novel visualizing techniques such as density equalizing mapping projections.
RESULTS: In the Web of Science, 13,044 congenital toxoplasmosis-related items published between 1900 and 2012 were identified. These were issued by 26,483 authors originating from 125 countries. The US was the dominating nation (38.7 % of total scientific output), followed by France (10.9 %) and Great Britain (9.2 %). The US also led the ranking in regards to semi-qualitative parameters (total citations, country-specific h-indices and citation rates). When research activity was related to economic figures, the ratio of total toxoplasmosis publications to the total GDP listed Switzerland first with an average of 589.35 toxoplasmosis-related publications per GDP in 1000 Bio US-$, followed by France (545.16), the UK (486.13) and Brazil (431.84) and the US (311.11). The relation of toxoplasmosis-specific publications to the economic power indicator GDP per capita in 1000 US-$ revealed that the US was ranked first with 97.65 toxoplasmosis-related publications/GDP per capita in 1000 US-$, followed by Brazil (85.95). Subject area analysis indicated a relative shortage of studies that addressed pharmacological or public health aspects of congenital toxoplasmosis.
CONCLUSIONS: This study is the first in-depth approach to sketch a global picture of the congenital toxoplasmosis research architecture. In contrast to other fields of biomedical research, not only high-income countries play a major role regarding congenital toxoplasmosis research but also countries such as Brazil that have a high incidence of congenital toxoplasmosis.
Triathletes often experience incoordination at the start of a transition run (TR); this is possibly reflected by altered joint kinematics. In this study, the first 20 steps of a run after a warm-up run (WR) and TR (following a 90 min cycling session) of 16 elite, male, long-distance triathletes (31.3 ± 5.4 years old) were compared. Measurements were executed on the competition course of the Ironman Frankfurt in Germany. Pacing and slipstream were provided by a cyclist in front of the runner. Kinematic data of the trunk and leg joints, step length, and step rate were obtained using the MVN Link inertial motion capture system by Xsens. Statistical parametric mapping was used to compare the active leg (AL) and passive leg (PL) phases of the WR and TR. In the TR, more spinal extension (~0.5–1°; p = 0.001) and rotation (~0.2–0.5°; p = 0.001–0.004), increases in hip flexion (~3°; ~65% AL−~55% PL; p = 0.001–0.004), internal hip rotation (~2.5°; AL + ~0–30% PL; p = 0.001–0.024), more knee adduction (~1°; ~80–95% AL; p = 0.001), and complex altered knee flexion patterns (~2–4°; AL + PL; p = 0.001–0.01) occurred. Complex kinematic differences between a WR and a TR were detected. This contributes to a better understanding of the incoordination in transition running.
Background: Effects of playing high stringed bow instruments on the upper body posture have not been analysed so far. The instrument-specific seating position when playing in an orchestra is compared to the habitual seating position.
Methods: Three dimensional back scans were performed in 13 professional violinists and viola players of a radio orchestra (8 f / 5 m). Trunk position in their habitual seating position and in the instrument- specific seating position imitating playing was compared. Statistical differences were calculated using Wilcoxon Matched Pairs Test with Bonferroni Holm correction.
Results: Significant differences were found between the seated position with instrument and without (p < 0.001, 0.03, 0.02 or 0.01) in the spine (trunk length, sagittal trunk decline, lumbar bending angle, maximal rotation, standard deviation rotation, lumbar lordosis), the shoulder (scapula distance, scapula rotation, scapula angle right) and pelvis distance.
Conclusions: Playing an instrument changes the static seating position by increased rotation of the spine and specific shoulder adaptations holding the instrument (left arm) and the bow (right arm), with minor effects on the pelvis. This forced position may result in chronic health effects. The method used in this study is an approach to better understand the involved muscular structures and possible resulting health damages.
Background: Dengue virus infection is the most rapidly spreading vector-borne disease in the world. Essential research on dengue virus transmission and its prevention requires community participation. Therefore, it is crucial to understand the factors that are associated with the willingness of communities in high prevalence areas to participate in dengue research. The aim of this study was to explore factors associated with the willingness of healthy community members in Aceh province, Indonesia, to participate in dengue research that would require phlebotomy.
Methodology/Principal Findings: A community-based cross-sectional study was carried out in nine regencies and municipalities of Aceh from November 2014 to March 2015. Interviews using a set of validated questionnaires were conducted to collect data on demography, history of dengue infection, socioeconomic status, and knowledge, attitude and practice regarding dengue fever. Two-step logistic regression and Spearman’s rank correlation (rs) analysis were used to assess the influence of independent variables on dependent variables. Among 535 participants, less than 20% had a good willingness to participate in the dengue study. The factors associated with good willingness to participate were being female, working as a civil servant, private employee or entrepreneur, having a high socioeconomic status and good knowledge, attitude and practice regarding dengue. Good knowledge and attitude regarding dengue were positive independent predictors of willingness to participate (OR: 2.30 [95% CI: 1.36–3.90] and 3.73 [95% CI: 2.24–6.21], respectively).
Conclusion/Significance: The willingness to participate in dengue research is very low among community members in Aceh, and the two most important associated factors are knowledge and attitude regarding dengue. To increase participation rate, efforts to improve the knowledge and attitude of community members regarding dengue fever and dengue-related research is required before such studies are launched.
Within the large variety of subtypes of chronic cough, either defined by their clinical or pathogenetic causes, occupational chronic cough may be regarded as one of the most preventable forms of the disease. Next to obstructive airway diseases such as asthma or chronic obstructive pulmonary disease, which are sometimes concomitant with chronic cough, this chronic airway disease gains importance in the field of occupational medicine since classic fiber-related occupational airway diseases will decrease in the future.
Apart from acute accidents and incidental exposures which may lead to an acute form of cough, there are numerous sources for the development of chronic cough within the workplace. Over the last years, a large number of studies has focused on occupational causes of respiratory diseases and it has emerged that chronic cough is one of the most prevalent work-related airway diseases. Best-known examples of occupations related to the development of cough are coal miners, hard-rock miners, tunnel workers, or concrete manufacturing workers.
As chronic cough is often based on a variety of non-occupational factors such as tobacco smoke, a distinct separation into either occupational or personally -evoked can be difficult. However, revealing the occupational contribution to chronic cough and to the symptom cough in general, which is the commonest cause for the consultation of a physician, can significantly lead to a reduction of the socioeconomic burden of the disease.
The population of industrialized countries such as the United States or of countries from the European Union spends approximately more than one hour each day in vehicles. In this respect, numerous studies have so far addressed outdoor air pollution that arises from traffic. By contrast, only little is known about indoor air quality in vehicles and influences by non-vehicle sources. Therefore the present article aims to summarize recent studies that address i.e. particulate matter exposure. It can be stated that although there is a large amount of data present for outdoor air pollution, research in the area of indoor air quality in vehicles is still limited. Especially, knowledge on non-vehicular sources is missing. In this respect, an understanding of the effects and interactions of i.e. tobacco smoke under realistic automobile conditions should be achieved in future.
Background: Second hand smoke (ETS)-associated particulate matter (PM) contributes considerably to indoor air contamination and constitutes a health risk for passive smokers. Easy to measure, PM is a useful parameter to estimate the dosage of ETS that passive smokers are exposed to. Apart from its suitability as a surrogate parameter for ETS-exposure, PM itself affects human morbidity and mortality in a dose-dependent manner. We think that ETS-associated PM should be considered an independent hazard factor, separately from the many other known harmful compounds of ETS. We believe that brand-specific and tobacco-product-specific differences in the release of PM matter and that these differences are of public interest. Methods: To generate ETS of cigarettes and cigarillos as standardized and reproducible as possible, an automatic second hand smoke emitter (AETSE) was developed and placed in a glass chamber. L&M cigarettes ("without additives", "red label", "blue label"), L&M filtered cigarillos ("red") and 3R4F standard research cigarettes (as reference) were smoked automatically according to a self-developed, standardized protocol until the tobacco product was smoked down to 8 mm distance from the tipping paper of the filter. Results: Mean concentration (Cmean) and area under the curve (AUC) in a plot of PM2.5 against time were measured, and compared. CmeanPM2.5 were found to be 518 μg/m3 for 3R4F cigarettes, 576 μg/m3 for L&M "without additives" ("red"), 448 μg/m3 for L&M "blue label", 547 μg/m3 for L&M "red label", and 755 μg/m3 for L&M filtered cigarillos ("red"). AUCPM2.5-values were 208,214 μg/m3·s for 3R4F reference cigarettes, 204,629 μg/m3·s for L&M "without additives" ("red"), 152,718 μg/m3·s for L&M "blue label", 238,098 μg/m3·s for L&M "red label" and 796,909 μg/m3·s for L&M filtered cigarillos ("red"). Conclusion: Considering the large and significant differences in particulate matter emissions between cigarettes and cigarillos, we think that a favorable taxation of cigarillos is not justifiable.