333.7 Natürliche Ressourcen, Energie und Umwelt
Refine
Language
- English (9) (remove)
Has Fulltext
- yes (9)
Is part of the Bibliography
- no (9)
Keywords
- ATR-FTIR (1)
- Abundance (1)
- Bottled water (1)
- Endocrine disrupting chemical (1)
- Exposure (1)
- Food packaging (1)
- Freshwater (1)
- In vitro bioassay (1)
- Plastic polymers (1)
- Pyrolysis GC–MS (1)
Highlights
• PUR, PVC and PLA microplastics affect life-history parameters of Daphnia magna.
• Natural kaolin particles are less toxic than microplastics.
• Microplastic toxicity is material-specific, e.g. PVC is most toxic on reproduction.
• In case of PVC, plastic chemicals are the main driver of microplastic toxicity.
• PLA bioplastics are similarly toxic as conventional plastics.
Abstract
Given the ubiquitous presence of microplastics in aquatic environments, an evaluation of their toxicity is essential. Microplastics are a heterogeneous set of materials that differ not only in particle properties, like size and shape, but also in chemical composition, including polymers, additives and side products. Thus far, it remains unknown whether the plastic chemicals or the particle itself are the driving factor for microplastic toxicity. To address this question, we exposed Daphnia magna for 21 days to irregular polyvinyl chloride (PVC), polyurethane (PUR) and polylactic acid (PLA) microplastics as well as to natural kaolin particles in high concentrations (10, 50, 100, 500 mg/L, ≤ 59 μm) and different exposure scenarios, including microplastics and microplastics without extractable chemicals as well as the extracted and migrating chemicals alone. All three microplastic types negatively affected the life-history of D. magna. However, this toxicity depended on the endpoint and the material. While PVC had the largest effect on reproduction, PLA reduced survival most effectively. The latter indicates that bio-based and biodegradable plastics can be as toxic as their conventional counterparts. The natural particle kaolin was less toxic than microplastics when comparing numerical concentrations. Importantly, the contribution of plastic chemicals to the toxicity was also plastic type-specific. While we can attribute effects of PVC to the chemicals used in the material, effects of PUR and PLA plastics were induced by the mere particle. Our study demonstrates that plastic chemicals can drive microplastic toxicity. This highlights the importance of considering the individual chemical composition of plastics when assessing their environmental risks. Our results suggest that less studied polymer types, like PVC and PUR, as well as bioplastics are of particular toxicological relevance and should get a higher priority in ecotoxicological studies.
Human exposure to endocrine disruptors is well documented by biomonitoring data. However, this information is limited to few chemicals like bisphenol A or phthalate plasticizers. To account for so-far unidentified endocrine disruptors and potential mixture effects we employ bioassays to detect endocrine activity in foodstuff and consequently characterize the integrated exposure to endocrine active compounds. Recently, we reported a broad contamination of commercially available bottled water with estrogenic activity and presented evidence for the plastic packaging being a source of this contamination. In continuation of that work, we here compare different sample preparation methods to extract estrogen-like compounds from bottled water. These data demonstrate that inappropriate extraction methods and sample treatment may lead to false-negative results when testing water extracts in bioassays. Using an optimized sample preparation strategy, we furthermore present data on the estrogenic activity of bottled water from France, Germany, and Italy: eleven of the 18 analyzed water samples (61.1%) induced a significant estrogenic response in a bioassay employing a human carcinoma cell line (MCF7, E-Screen). The relative proliferative effects ranged from 19.8 to 50.2% corresponding to an estrogenic activity of 1.9-12.2 pg estradiol equivalents per liter bottled water. When comparing water of the same spring that is packed in glass or plastic bottles made of polyethylene terephthalate (PET), estrogenic activity is three times higher in water from plastic bottles. These data support the hypothesis that PET packaging materials are a source of estrogen-like compounds. Furthermore, the findings presented here conform to previous studies and indicate that the contamination of bottled water with endocrine disruptors is a transnational phenomenon.
Bisphenols and phthalates, chemicals frequently used in plastic products, promote obesity in cell and animal models. However, these well-known metabolism-disrupting chemicals (MDCs) represent only a minute fraction of all compounds found in plastics. To gain a comprehensive understanding of plastics as a source of exposure to MDCs, we characterized the chemicals present in 34 everyday products using nontarget high-resolution mass spectrometry and analyzed their joint adipogenic activities by high-content imaging. We detected 55,300 chemical features and tentatively identified 629 unique compounds, including 11 known MDCs. Importantly, the chemicals extracted from one-third of the products caused murine 3T3-L1 preadipocytes to proliferate, and differentiate into adipocytes, which were larger and contained more triglycerides than those treated with the reference compound rosiglitazone. Because the majority of plastic extracts did not activate the peroxisome proliferator-activated receptor γ and the glucocorticoid receptor, the adipogenic effects are mediated via other mechanisms and, thus, likely to be caused by unknown MDCs. Our study demonstrates that daily-use plastics contain potent mixtures of MDCs and can, therefore, be a relevant yet underestimated environmental factor contributing to obesity.
Bisphenols and phthalates, chemicals frequently used in plastic products, promote obesity in cell and animal models. However, these well-known metabolism disrupting chemicals (MDCs) represent only a minute fraction of all compounds found in plastics. To gain a comprehensive understanding of plastics as a source of exposure to MDCs, we characterized all chemicals present in 34 everyday products using nontarget high-resolution mass spectrometry and analyzed their joint adipogenic activities by high-content imaging. We detected 55,300 chemical features and tentatively identified 629 unique compounds, including 11 known MDCs. Importantly, chemicals that induced proliferation, growth, and triglyceride accumulation in 3T3-L1 adipocytes were found in one third of the products. Since the majority did not target peroxisome proliferator-activated receptor γ, the effects are likely to be caused by unknown MDCs. Our study demonstrates that daily-use plastics contain potent mixtures of MDCs and can, therefore, be a relevant yet underestimated environmental factor contributing to obesity.
Teaser Plastics contain a potent mixture of chemicals promoting adipogenesis, a key process in developing obesity.
The toxicity of microplastics on Daphnia magna as key model for freshwater zooplankton is well described. While several studies predict population-level effects based on short-term, individual-level responses, only very few have validated these predictions experimentally. Thus, we exposed D. magna populations to irregular polystyrene microplastics and diatomite as natural particle (both ≤63 µm) over 50 days. We used mixtures of both particle types at fixed particle concentrations (50,000 mL-1) and recorded the overall population density, the size of the individual animals, and resting egg production. Particle exposure adversely affected the population density and structure and induced resting egg production. The terminal population size was 31–42% lower in exposed compared to control populations. Interestingly, mixtures containing diatomite induced stronger effects than microplastics alone highlighting that natural particles are not per se less toxic than microplastics. Our results demonstrate that an exposure to synthetic and natural particles has negative population-level effects on zooplankton. Understanding the mixture toxicity of microplastics and natural particles is important given that aquatic organisms will experience exposure to both. Just as for chemical pollutants, better knowledge of such joint effects is essential to fully understand the environmental risks of complex particle mixtures.
Environmental Implications While microplastics are commonly considered hazardous based on individual-level effects, there is a dearth of information on how they affect populations. Since the latter is key for understanding the environmental impacts of microplastics, we investigated how particle exposures affect the population size and structure of Daphnia magna. In addition, we used mixtures of microplastics and natural particles because neither occurs alone in nature and joint effects can expected in an environmentally realistic scenario. We show that such mixtures adversely affect daphnid populations and highlight that population-level and mixture-toxicity designs are one important step towards more environmental realism in microplastics research.
The toxicity of microplastics on Daphnia magna as a key model for freshwater zooplankton is well described. While several studies predict population-level effects based on short-term, individual-level responses, only very few have validated these predictions experimentally. Thus, we exposed D. magna populations to irregular polystyrene microplastics and diatomite as natural particle (both ≤ 63 μm) over 50 days. We used mixtures of both particle types at fixed particle concentrations (50,000 mL-1) and recorded the effects on overall population size and structure, the size of the individual animals, and resting egg production. Particle exposure adversely affected the population density and structure, and induced resting egg production. The terminal population size was 28–42% lower in exposed compared to control populations. Interestingly, mixtures containing diatomite induced stronger effects than microplastics alone, highlighting that natural particles are not per se less toxic than microplastics. Our results demonstrate that an exposure to synthetic and natural particles has negative population-level effects on zooplankton. Understanding the mixture toxicity of microplastics and natural particles is important given that aquatic organisms will experience exposure to both. Just as for chemical pollutants, better knowledge of such joint effects is essential to fully understand the environmental impacts of complex particle mixtures.
Environmental Implications While microplastics are commonly considered hazardous based on individual-level effects, there is a dearth of information on how they affect populations. Since the latter is key for understanding the environmental impacts of microplastics, we investigated how particle exposures affect the population size and structure of Daphnia magna. In addition, we used mixtures of microplastics and natural particles because neither occurs alone in nature and joint effects can be expected in an environmentally realistic scenario. We show that such mixtures adversely affect daphnid populations and highlight that population-level and mixture-toxicity designs are one important step towards more environmental realism in microplastics research.
The toxicity of microplastics on Daphnia magna as a key model for freshwater zooplankton is well described. While several studies predict population-level effects based on short-term, individual-level responses, only very few have validated these predictions experimentally. Thus, we exposed D. magna populations to irregular polystyrene microplastics and diatomite as natural particle (both ≤ 63 μm) over 50 days. We used mixtures of both particle types at fixed particle concentrations (50,000 particles mL-1) and recorded the effects on overall population size and structure, the size of the individual animals, and resting egg production. Particle exposure adversely affected the population size and structure and induced resting egg production. The terminal population size was 28–42% lower in exposed compared to control populations. Interestingly, mixtures containing diatomite induced stronger effects than microplastics alone, highlighting that natural particles are not per se less toxic than microplastics. Our results demonstrate that an exposure to synthetic and natural particles has negative population-level effects on zooplankton. Understanding the mixture toxicity of microplastics and natural particles is important given that aquatic organisms will experience exposure to both. Just as for chemical pollutants, better knowledge of such joint effects is essential to fully understand the environmental impacts of complex particle mixtures.
Environmental Implications While microplastics are commonly considered hazardous based on individual-level effects, there is a dearth of information on how they affect populations. Since the latter is key for understanding the environmental impacts of microplastics, we investigated how particle exposures affect the population size and structure of Daphnia magna. In addition, we used mixtures of microplastics and natural particles because neither occurs alone in nature and joint effects can be expected in an environmentally realistic scenario. We show that such mixtures adversely affect daphnid populations and highlight that population-level and mixture-toxicity designs are one important step towards more environmental realism in microplastics research.
he ubiquity of microplastics in aquatic ecosystems has raised concerns over their interaction with biota. However,microplastics research on freshwater species, especially mollusks, is still scarce. We, therefore, investigated the factorsaffecting microplastics ingestion in the freshwater musselDreissena polymorpha. Using polystyrene spheres (5, 10, 45,90μm), we determined the body burden of microplastics in the mussels in relation to 1) exposure and depuration time, 2)body size, 3) food abundance, and 4) microplastic concentrations.D. polymorpharapidly ingested microplastics and ex-creted most particles within 12 h. A few microplastics were retained for up to 1 wk. Smaller individuals had a higher relativebody burden of microplastics than larger individuals. The uptake of microplastics was concentration‐dependent, whereas anadditional food supply (algae) reduced it. We also compared the ingestion of microplastics byD. polymorphawith 2 otherfreshwater species (Anodonta anatina,Sinanodonta woodiana), highlighting that absolute and relative uptake depends onthe species and the size of the mussels. In addition, we determined toxicity of polystyrene fragments (≤63μm,6.4–100 000 p mL–1) and diatomite (natural particle, 100 000 p mL–1)inD. polymorphaafter 1, 3, 7, and 42 d of exposure,investigating clearance rate, energy reserves, and oxidative stress. Despite ingesting large quantities, exposure to poly-styrene fragments only affected the clearance rate ofD. polymorpha. Further, results of the microplastic and diatomiteexposure did not differ significantly. Therefore,D. polymorphais unaffected by or can compensate for polystyrene fragmenttoxicity even at concentrations above current environmental levels.Environ Toxicol Chem2021;40:2247–2260. © 2021 TheAuthors.Environmental Toxicology and Chemistrypublished by Wiley Periodicals LLC on behalf of SETAC.Keywords:Microplastics; Toxic effects; Mollusk toxicity
Aquatic ecosystems are globally contaminated with microplastics (MP). However, comparative data on MP levels in freshwater systems is still scarce. Therefore, the aim of this study is to quantify MP abundance in water and sediment of the German river Elbe using visual, spectroscopic (Fourier-transform infrared spectroscopy) and thermo analytical (pyrolysis gas chromatography mass spectrometry) methods. Samples from eleven German sites along the German part of the Elbe were collected, both in the water and sediment phase, in order to better understand MP sinks and transport mechanisms. MP concentrations differed between the water and sediment phase. Sediment concentrations (mean: 3,350,000 particles m−3, 125–5000 μm MP) were in average 600,000-fold higher than water concentrations (mean: 5.57 particles m−3, 150–5000 μm MP). The abundance varied between the sampling sites: In sediments, the abundance decreased in the course of the river while in water samples no such clear trend was observed. This may be explained by a barrage retaining sediments and limiting tidal influence in the upstream parts of the river. Particle shape differed site-specifically with one site having exceptionally high quantities of spheres, most probably due to industrial emissions of PS-DVB resin beads. Suspended MP consisted predominantly of polyethylene and polypropylene whereas sediments contained a higher diversity of polymer types. Determined MP concentrations correspond well to previous results from other European rivers. In a global context, MP levels in the Elbe relate to the lower (water) to middle section (sediment) of the global range of MP concentrations determined for rivers worldwide. This highlights that elevated MP levels are not only found in single countries or continents, but that MP pollution is an issue of global concern.