333.7 Natürliche Ressourcen, Energie und Umwelt
Refine
Document Type
- Article (2)
- Doctoral Thesis (1)
- Preprint (1)
Language
- English (4) (remove)
Has Fulltext
- yes (4)
Is part of the Bibliography
- no (4)
Keywords
Institute
Highlights
• PUR, PVC and PLA microplastics affect life-history parameters of Daphnia magna.
• Natural kaolin particles are less toxic than microplastics.
• Microplastic toxicity is material-specific, e.g. PVC is most toxic on reproduction.
• In case of PVC, plastic chemicals are the main driver of microplastic toxicity.
• PLA bioplastics are similarly toxic as conventional plastics.
Abstract
Given the ubiquitous presence of microplastics in aquatic environments, an evaluation of their toxicity is essential. Microplastics are a heterogeneous set of materials that differ not only in particle properties, like size and shape, but also in chemical composition, including polymers, additives and side products. Thus far, it remains unknown whether the plastic chemicals or the particle itself are the driving factor for microplastic toxicity. To address this question, we exposed Daphnia magna for 21 days to irregular polyvinyl chloride (PVC), polyurethane (PUR) and polylactic acid (PLA) microplastics as well as to natural kaolin particles in high concentrations (10, 50, 100, 500 mg/L, ≤ 59 μm) and different exposure scenarios, including microplastics and microplastics without extractable chemicals as well as the extracted and migrating chemicals alone. All three microplastic types negatively affected the life-history of D. magna. However, this toxicity depended on the endpoint and the material. While PVC had the largest effect on reproduction, PLA reduced survival most effectively. The latter indicates that bio-based and biodegradable plastics can be as toxic as their conventional counterparts. The natural particle kaolin was less toxic than microplastics when comparing numerical concentrations. Importantly, the contribution of plastic chemicals to the toxicity was also plastic type-specific. While we can attribute effects of PVC to the chemicals used in the material, effects of PUR and PLA plastics were induced by the mere particle. Our study demonstrates that plastic chemicals can drive microplastic toxicity. This highlights the importance of considering the individual chemical composition of plastics when assessing their environmental risks. Our results suggest that less studied polymer types, like PVC and PUR, as well as bioplastics are of particular toxicological relevance and should get a higher priority in ecotoxicological studies.
Bisphenols and phthalates, chemicals frequently used in plastic products, promote obesity in cell and animal models. However, these well-known metabolism-disrupting chemicals (MDCs) represent only a minute fraction of all compounds found in plastics. To gain a comprehensive understanding of plastics as a source of exposure to MDCs, we characterized the chemicals present in 34 everyday products using nontarget high-resolution mass spectrometry and analyzed their joint adipogenic activities by high-content imaging. We detected 55,300 chemical features and tentatively identified 629 unique compounds, including 11 known MDCs. Importantly, the chemicals extracted from one-third of the products caused murine 3T3-L1 preadipocytes to proliferate, and differentiate into adipocytes, which were larger and contained more triglycerides than those treated with the reference compound rosiglitazone. Because the majority of plastic extracts did not activate the peroxisome proliferator-activated receptor γ and the glucocorticoid receptor, the adipogenic effects are mediated via other mechanisms and, thus, likely to be caused by unknown MDCs. Our study demonstrates that daily-use plastics contain potent mixtures of MDCs and can, therefore, be a relevant yet underestimated environmental factor contributing to obesity.
Bisphenols and phthalates, chemicals frequently used in plastic products, promote obesity in cell and animal models. However, these well-known metabolism disrupting chemicals (MDCs) represent only a minute fraction of all compounds found in plastics. To gain a comprehensive understanding of plastics as a source of exposure to MDCs, we characterized all chemicals present in 34 everyday products using nontarget high-resolution mass spectrometry and analyzed their joint adipogenic activities by high-content imaging. We detected 55,300 chemical features and tentatively identified 629 unique compounds, including 11 known MDCs. Importantly, chemicals that induced proliferation, growth, and triglyceride accumulation in 3T3-L1 adipocytes were found in one third of the products. Since the majority did not target peroxisome proliferator-activated receptor γ, the effects are likely to be caused by unknown MDCs. Our study demonstrates that daily-use plastics contain potent mixtures of MDCs and can, therefore, be a relevant yet underestimated environmental factor contributing to obesity.
Teaser Plastics contain a potent mixture of chemicals promoting adipogenesis, a key process in developing obesity.
Plastics contain a complex mixture of chemicals including polymers, additives, starting substances and side-products of processing. These plastic chemicals are prone to leach into the packaged goods, in the case of food contact materials (FCMs), or into the natural environment, in the case of plastic debris. Thus, plastics represent an exposure source of chemicals for humans and wildlife alike. While it is widely known that individual plastic chemicals, such as bisphenol A and phthalates, are hazardous, little is known on the overall chemical composition and toxicity of plastics. When fragmented into smaller particles, referred to as microplastics (< 5 mm), the plastic itself can be ingested by many species. It is well established that microplastic ingestion can have negative consequences for a wide range of organisms including invertebrates, but the contribution of plastic chemicals to the toxicity of microplastics is unclear.
Given the above, the present thesis aimed at a comprehensive toxicological, ecotoxicological and chemical characterization of everyday plastics. For a comparative evaluation, 77 plastic products were selected covering 16 material types (e.g., polyethylene) made from petroleum or renewable feedstocks. These products included biodegradable products, FCMs and non-FCMs, as well as raw materials and final products, respectively. In the first two studies, the chemical mixtures contained in the 77 products were extracted with methanol and extracts were analyzed in a set of four in vitro bioassays and by non-target high-resolution gas or liquid chromatography mass spectrometry. Since an exposure only occurs if chemicals actually leach under realistic conditions, in a third study migration experiments with water were conducted for 24 out of the 77 products. The aqueous migrates were assessed in the same way as the methanolic extracts. In addition, the freshwater invertebrate Daphnia magna was exposed chronically to microplastics made of polyvinylchloride (PVC), polyurethane (PUR) and polylactic acid (PLA) to investigate the contribution of chemicals in microplastic toxicity, in a fourth study.
The experimental findings demonstrate that a wide variety of chemicals is present in plastics. A single plastic product can contain up to several thousand chemical features, most of which unique to that product and at the same time unknown. The results also indicate that the majority of these chemical mixtures are toxic in vitro. Accordingly, 65% of the plastic extracts induced baseline toxicity and 42% an oxidative stress response, while 25% had an antiandrogenic and 6% an estrogenic activity. This implies that chemicals causing unspecific toxicity are more prevalent in plastics than such with endocrine effects. These chemicals can also leach from plastics under realistic conditions. Between 17 and 8936 chemical features were detected in a single migrate sample and all 24 tested migrates induced in vitro toxicity. This means that humans and wildlife can actually be exposed to toxic plastic chemicals under realistic conditions. Generally, each product has its individual toxicological and chemical fingerprint. Thus, neither material type, feedstock, biodegradability nor the food contact suitability of a product can serve as a predictor for the toxicity, the chemical composition or complexity of a product. Likewise, this means that bio-based and biodegradable materials are not superior to their petroleum-based counterparts from a toxicological perspective despite being promoted as sustainable alternatives to conventional plastics.
Moreover, the present thesis demonstrates that plastic chemicals can be the main driver for microplastic toxicity. Irregular microplastics made of PVC, PUR and PLA adversely affected life-history traits of D. magna in a polymer type- and endpoint-dependent manner at concentrations between 100 and 500 mg L-1 and with a higher efficiency than natural kaolin particles. While the toxicity of PVC was triggered by the chemicals used in the material, the effects of PUR and PLA were induced by the physical properties of the particle.
In addition, in the fifth study, results and observations made during this thesis were integrated inter- and transdisciplinarily with the perspectives of a social scientist and a product manufacturer. This elucidated that knowledge on plastic ingredients is often concealed, is lacking or not applicable in practice. These intransparencies hinder the safety evaluation of plastic products as well as the choice and sale of the least toxic packaging material.
Overall, the present thesis highlights that the chemical safety of plastics and their bio-based and biodegradable alternatives is currently not ensured. Thus, chemicals require more consideration in the toxicity and risk assessment of plastics and microplastics. Product-specific and complex chemical compositions, including unknown compounds, pose a challenge here. Two essential steps towards non-toxic products are to increase transparency along the product life cycle and to reduce the chemical complexity of plastics by communication and regulation. The results of the present thesis indicate that products exist which do not contain toxic chemicals. These can serve to direct the design of safer plastics. Since toxicity and chemical complexity seem to increase with processing, the integration of toxicity testing during the production steps would further support the safe and sustainable production and use of plastic products.