Geowissenschaften / Geographie
Refine
Year of publication
- 2020 (16) (remove)
Has Fulltext
- yes (16)
Is part of the Bibliography
- no (16)
Keywords
- Democratic Republic of the Congo (1)
- GIS (1)
- Natural hazards (1)
- Palaeoceanography (1)
- Palaeoclimate (1)
- Physical oceanography (1)
- Politische Kollektivität (1)
- Städtische soziale Bewegungen (1)
- Wohnungspolitik (1)
- anomaly (1)
Institute
- Geowissenschaften (11)
- Geowissenschaften / Geographie (3)
- Geographie (2)
In partially molten regions inside the earth melt buoyancy may trigger upwelling of both solid and fluid phases, i.e. diapirism. If the melt is allowed to move separately with respect to the matrix, melt perturbations may evolve into solitary porosity waves. While diapirs may form on a wide range of scales, porosity waves are restricted to sizes of a few times the compaction length. Thus, the size of a partially molten perturbation controls whether a diapir or a porosity wave will emerge. We study the transition from diapiric rise to solitary porosity waves by solving the two-phase flow equations of conservation of mass and momentum in 2D with porosity dependent matrix viscosity. We systematically vary the initial size of a porosity perturbation from 1 to 100 times the compaction length. If the perturbation is much larger than a regular solitary wave, its Stokes velocity is large and therefore faster than the segregating melt. Consequently, the fluid is not able to form a porosity wave and a diapir emerges. For small perturbations solitary waves emerge, either with a positive or negative vertical matrix velocity inside. In between the diapir and solitary wave regimes we observe a third regime of solitary wave induced focusing of melt. In these cases, diapirism is dominant but the fluid is still fast enough to locally build up small solitary waves which rise slightly faster than the diapir and form finger like structures at the front of the diapir. In our numerical simulations the width of these fingers is controlled by the compaction length or the grid size, whichever is larger. In cases where the compaction length becomes similar to or smaller than the grid size the finger-like leading solitary porosity waves are no more properly resolved, and too big and too fast waves may be the result. Therefore, one should be careful in large scale two-phase flow modelling with melt focusing especially when compaction length and grid size are of similar order.
Die angespannte Lage am Wohnungsmarkt hat in vielen Städten eine neue Welle von Verdrängungsprozessen induziert und insbesondere die Situation einkommensschwacher Haushalte häufig prekär werden lassen. Angesichts dieser Entwicklungen haben sich vielerorts mietenpolitische Bewegungen konstituiert, die sich für eine Abkehr von einer neoliberalisierten und zunehmend finanzialisierten Wohnungsversorgung einsetzen. Lisa Vollmer nimmt in ihrer Forschungsarbeit zwei solcher Bewegungen in den Blick und fragt danach, wie sich politische Kollektivität in den alltäglichen Praktiken von Mieter*innen in Berlin bzw. New York formiert.
Drought is understood as both a lack of water (i.e., a deficit as compared to some requirement) and an anomaly in the condition of one or more components of the hydrological cycle. Most drought indices, however, only consider the anomaly aspect, i.e., how unusual the condition is. In this paper, we present two drought hazard indices that reflect both the deficit and anomaly aspects. The soil moisture deficit anomaly index, SMDAI, is based on the drought severity index, DSI, but is computed in a more straightforward way that does not require the definition of a mapping function. We propose a new indicator of drought hazard for water supply from rivers, the streamflow deficit anomaly index, QDAI, which takes into account the surface water demand of humans and freshwater biota. Both indices are computed and analyzed at the global scale, with a spatial resolution of roughly 50 km, for the period 1981-2010, using monthly time series of variables computed by the global water resources and the model WaterGAP2.2d. We found that the SMDAI and QDAI values are broadly similar to values of purely anomaly-based indices. However, the deficit anomaly indices provide more differentiated, spatial and temporal patterns that help to distinguish the degree of the actual drought hazard to vegetation health or the water supply. QDAI can be made relevant for stakeholders with different perceptions about the importance of ecosystem protection, by adapting the approach for computing the amount of water that is required to remain in the river for the well being of the river ecosystem. Both deficit anomaly indices are well suited for inclusion in local or global drought risk studies.
Analysing the composition of ambient ultrafine particles (UFP) is a challenging task due to the low mass and chemical complexity of small particles, yet it is a prerequisite for the identification ofparticle sources and the assessment of potential health risks. Here, we show the molecular characterization of UFP, based on cascade impactor (Nano-MOUDI) 10samples that were collected at an air quality monitoring station nearby one of Europe`s largest airports in Frankfurt, Germany. At this station, particle-size-distribution measurements show enhanced number concentration of particles smaller than 50nm during airport operating hours. We sampled the lower UFP fraction (0.010-0.018 μm; 0.018-0.032 μm; 0.032-0.056 μm) when the air masses arrived from the airport. We developed an optimized filter extraction procedure, used ultra-high performance liquid chromatography (UHPLC) for compound separation, and a heated electrospray ionization (HESI) source with an 15Orbitrap high-resolution mass spectrometer (HRMS) as a detector for organic compounds. A non-target screening detected ~200 organic compounds in the UFP fraction with sample-to-blank ratios larger than five. We identified the largest signals as homologous series of pentaerythritol esters (PEE) and trimethylolpropane esters (TMPE), which are base stocks of aircraft lubrication oils. We unambiguously attribute the majority of detected compounds to jet engine lubrication oils by matching retention times, high-resolution/accurate mass (HR/AM) measurements, and comparing MS/MS fragmentation patterns between both ambient samples and commercially available jet oils. For each UFP stage, we created molecular fingerprints to visualize the complex chemical composition ofthe organic fraction and their average carbon oxidation state. These graphs underline the presence of the homologous series of PEE and TMPE, and the appearance of jet oil additives (e.g. tricresyl phosphate (TCP)). Targeted screening on TCP confirmed the absence of the harmful tri-orthoisomer, while we identified a thermal transformation product of TMPE-based lubrication oil (trimethylolpropane phosphate (TMP-P)). Even though a quantitative determination of the identified compounds is limited, the presented method enables the qualitative detection of molecular markers for jet engine lubricants in UFP and thus strongly improves the source apportionment of UFP near airports.
During the first two days of August 2016 a seismic crisis occurred on Brava, Cape Verde, which – according to observations based on a local seismic network – was characterized by more than thousand volcano–seismic signals. Brava is considered an active volcanic island, although it has not experienced any historic eruptions. Seismicity significantly exceeded the usual level during the crisis. We report on results based on data from a temporary seismic–array deployment on the neighbouring island of Fogo at a distance of about 35 km. The array was in operation from October 2015 to December 2016 and recorded a total of 1343 earthquakes, 355 thereof were localized. On 1 and 2 August we observed 54 earthquakes, 25 of which could be located beneath Brava. We further evaluate the observations with regards to possible precursors to the crisis and its continuation. Our analysis shows a migration of seismicity around Brava, but no distinct precursory pattern. However, the observations suggest that similar earthquake swarms commonly occur close to Brava. The results further confirm the advantages of seismic arrays as tools for the remote monitoring of regions with limited station coverage or access.
During the first two days of August 2016 a seismic crisis occurred on Brava, Cabo Verde, which – according to observations based on a local seismic network – was characterized by more than a thousand volcano-seismic signals. Brava is considered an active volcanic island, although it has not experienced any historic eruptions. Seismicity significantly exceeded the usual level during the crisis. We report on results based on data from a temporary seismic-array deployment on the neighbouring island of Fogo at a distance of about 35 km. The array was in operation from October 2015 to December 2016 and recorded a total of 1343 earthquakes in the region of Fogo and Brava; 355 thereof were localized. On 1 and 2 August we observed 54 earthquakes, 25 of which could be located beneath Brava. We further evaluate the observations with regards to possible precursors to the crisis and its continuation. Our analysis shows a significant variation in seismicity around Brava, but no distinct precursory pattern. However, the observations suggest that similar earthquake swarms commonly occur close to Brava. The results further confirm the advantages of seismic arrays as tools for the remote monitoring of regions with limited station coverage or access.
Rodrigues Ridge connects the Réunion hotspot track with the Central Indian Ridge (CIR) and has been suggested to represent the surface expression of a sub-lithospheric flow channel. From global earthquake catalogues, the seismicity in the region has been associated mainly with events related to the fracture zones at the CIR. However, some segments of the CIR appear void of seismic events. Here, we report on the seismicity recorded at a temporary array of 10 seismic stations operating on Rodrigues Island from September 2014 to June 2016. The array analysis was performed in the time domain by time shifting and stacking the complete waveforms. Event distances were estimated based on a 1-D velocity model and the travel time differences between S and P wave arrivals. We detected and located 63 new events that were not reported by the global networks. Most of the events (51) are located off the CIR and can be classified as intraplate earthquakes. Local magnitudes varied between 1.6 and 3.7. Four seismic clusters were observed that occurred to the west of the spreading segment of the CIR. The Rodrigues Ridge appeared to be aseismic during the period of operation. The lack of seismic activity along both Rodrigues Ridge and the sections of the CIR to the east of Rodrigues may be explained by partially molten upper-mantle material, possibly in relation to the proposed material flow between the Réunion plume and the CIR.
Tropical cyclones (TC) represent a substantial threat to life and property for Caribbean and adjacent populations. The prospective increase of TC magnitudes, expressed in the 15th chapter of the IPCC AR5 report, entails a rising probability of ecological and social disasters, which were tragically exemplified by several severe Caribbean TC strikes during the past 20 years. Modern IPCC-grade climate models, however, still lack the required spatial and temporal resolution to accurately consider the underlying boundary conditions that modulate long-time TC patterns beyond the Instrumental Era. It is thus necessary to provide a synoptic mechanistic understanding regarding the origin of such long-time patterns, in order to predict reliable changes of TC magnitude and frequency under future climate scenarios. Caribbean TC records are still rare and often lack the necessary continuity and resolution to overcome these limitations. Here, we report on an annually-resolved sedimentary archive from the bottom of the Great Blue Hole (Lighthouse Reef, Belize). The TC record encompasses 1885 years and extends all existing site-specific TC archives both in terms of resolution and duration. We identified a likely connection between long-term TC patterns and climate phenomena responses to Common Era climate variations and offer a conceptual and comparative view considering several involved tropospheric and oceanographic control mechanisms such as the El-Niño-Southern-Oscillation, the North Atlantic Oscillation and the Atlantic Multidecadal Oscillation. These basin-scaled climate modes exercise internal control on TC activity by modulating the thermodynamic environment (sea-surface temperature and vertical wind shear stress dynamics) for enhanced/suppressed TC formation both on millennial (primary) and multi-decadal (secondary) time scales. We interpret the beginning of the Medieval Warm Period (MWP) as an important time interval of the Common Era record and suspect that the southward migration of the intertropical convergence zone (ITCZ) caused, in combination with extensive hydro-climate changes, a shift in the tropical Atlantic TC regime. The TC activity in the south-western Caribbean changed in general from a stable and less active stage (100–900 CE) to a more active and variable state (1,100 CE-modern).
Background: Point of care devices for performing targeted coagulation substitution in bleeding patients have become increasingly important in recent years. New on the market is the Quantra® from HemoSonics (LC, Charlottesville, VA, US). It uses sonorheometry, a sonic estimation of elasticity via resonance (SEER), a novel ultrasound-based technology that measures viscoelastic properties of whole blood. Several studies have already shown the comparability with devices already established on the market such as the ROTEM® (TEM International GmbH, Munich, Germany).
Objective: In contrast to existing studies, the planned study will be the first prospective interventional study using the new Quantra® system in a cardiac surgical patient cohort. The aim is to investigate the non-inferiority between an already existing coagulation algorithm, based on ROTEM®/Multiplate®, and a new algorithm based on the Quantra®, for the treatment of coagulopathic cardiac surgical patients.
Methods: The study is divided into two phases. In an initial observation phase, whole blood samples of 20 patients will be analyzed using both ROTEM®/Multiplate® and Quantra® obtained at three defined points of time (prior to surgery, after completion of cardiopulmonary bypass, on arrival in the intensive care unit). The obtained threshold values will be used to create an algorithm for hemotherapy. In a second intervention phase, the new algorithm will be tested against an algorithm used routineously for years at our department for non-inferiority.
Results: The main objective of the examination is the cumulative loss of blood within 24 hours after surgery. Statistical calculations based on literature and in-house data suggest that the new algorithm is not inferior if the difference in cumulative blood loss is < 150ml/24 h.
Conclusions: Because of the comparability of the Quantra® sonorheometry system with ROTEM® rotational thromboelastometric measurement methods, the existing hemotherapy treatment algorithm can be adapted to the Quantra device with a proof of non-inferiority. Clinical Trial: International Registered Report Identifier (IRRID): clinicaltrials.gov: NCT03902275
Inclusions of breyite (previously known as walstromite-structured CaSiO3) in diamond are usually interpreted as retrogressed CaSiO3 perovskite trapped in the transition zone or the lower mantle. However, the thermodynamic stability field of breyite does not preclude its crystallization together with diamond under upper-mantle conditions (6–10 GPa). The possibility of breyite forming in subducted sedimentary material through the reaction CaCO3 + SiO2 = CaSiO3 + C + O2 was experimentally evaluated in the CaO–SiO2–C–O2 ± H2O system at 6–10 GPa, 900–1500 ∘C and oxygen fugacity 0.5–1.0 log units below the Fe–FeO (IW) buffer. One experimental series was conducted in the anhydrous subsystem and aimed at determining the melting temperature of the aragonite–coesite (or stishovite) assemblage. It was found that melting occurs at a lower temperature (∼1500 ∘C) than the decarbonation reaction, which indicates that breyite cannot be formed from aragonite and silica under anhydrous conditions and an oxygen fugacity above IW – 1. In the second experimental series, we investigated partial melting of an aragonite–coesite mixture under hydrous conditions at the same pressures and redox conditions. The melting temperature in the presence of water decreased strongly (to 900–1200 ∘C), and the melt had a hydrous silicate composition. The reduction of melt resulted in graphite crystallization in equilibrium with titanite-structured CaSi2O5 and breyite at ∼1000 ∘C. The maximum pressure of possible breyite formation is limited by the reaction CaSiO3 + SiO2 = CaSi2O5 at ∼8 GPa. Based on the experimental results, it is concluded that breyite inclusions found in natural diamond may be formed from an aragonite–coesite assemblage or carbonate melt at 6–8 GPa via reduction at high water activity.
Measurements of halogenated trace gases in ambient air frequently rely on canister sampling followed by offline laboratory analysis. This allows for a large number of compounds to be analysed under stable conditions, maximizing measurement precision. However, individual compounds might be affected during the sampling and storage of canister samples. In order to assess halocarbon stability in whole-air samples from the upper troposphere and lowermost stratosphere, we performed stability tests using the high-resolution sampler (HIRES) air sampling unit, which is part of the Civil Aircraft for the Regular Investigation of the atmosphere Based on an Instrument Container (CARIBIC) instrument package. The HIRES unit holds 88 lightweight stainless-steel cylinders that are pressurized in flight to 4.5 bar using metal bellows pumps. The HIRES unit was first deployed in 2010 but has up to now not been used for regular halocarbon analysis with the exception of chloromethane analysis. The sample collection unit was tested for the sampling and storage effects of 28 halogenated compounds. The focus was on compound stability in the stainless-steel canisters during storage of up to 5 weeks and on the influence of ozone, since flights take place in the upper troposphere and lowermost stratosphere with ozone mixing ratios of up to several hundred parts per billion by volume (ppbv). Most of the investigated (hydro)chlorofluorocarbons and long-lived hydrofluorocarbons were found to be stable over a storage time of up to 5 weeks and were unaltered by ozone being present during pressurization. Some compounds such as dichloromethane, trichloromethane, and tetrachloroethene started to decrease in the canisters after a storage time of more than 2 weeks or exhibited lowered mixing ratios in samples pressurized with ozone present. A few compounds such as tetrachloromethane and tribromomethane were found to be unstable in the HIRES stainless-steel canisters independent of ozone levels. Furthermore, growth was observed during storage for some species, namely for HFC-152a, HFC-23, and Halon 1301.
Diamond formation in the Earth has been extensively discussed in recent years on the basis of geochemical analysis of natural materials, high-pressure experimental studies, or theoretical aspects. Here, we demonstrate experimentally for the first time, the spontaneous crystallization of diamond from CH4-rich fluids at pressure, temperature and redox conditions approximating those of the deeper parts of the cratonic lithospheric mantle (5-7 GPa) without using diamond seed crystals or carbides. In these experiments the fluid phase is nearly pure methane, even though the oxygen fugacity was significantly above metal saturation. We propose several previously unidentified mechanisms that may promote diamond formation under such conditions and which may also have implications for the origin of sublithospheric diamonds. These include the hydroxylation of silicate minerals like olivine and pyroxene, H2 incorporation into these phases and the "etching" of graphite by H2 and CH4 and reprecipitation as diamond. This study also serves as a demonstration of our new high-pressure experimental technique for obtaining reduced fluids, which is not only relevant for diamond synthesis, but also for investigating the metasomatic origins of diamond in the upper mantle, which has further implications for the deep carbon cycle.
The most frequently used boundary-layer turbulence parameterization in numerical weather prediction (NWP) models are turbulence kinetic energy (TKE) based-based schemes. However, these parameterizations suffer from a potential weakness, namely the strong dependence on an ad-hoc quantity, the so-called turbulence length scale. The physical interpretation of the turbulence length scale is difficult and hence it cannot be directly related to measurements or large eddy simulation (LES) data. Consequently, formulations for the turbulence length scale in basically all TKE schemes are based on simplified assumptions and are model-dependent. A good reference for the independent evaluation of the turbulence length scale expression for NWP modeling is missing. Here we propose a new turbulence length scale diagnostic which can be used in the gray zone of turbulence without modifying the underlying TKE turbulence scheme. The new diagnostic is based on the TKE budget: The core idea is to encapsulate the sum of the molecular dissipation and the cross-scale TKE transfer into an effective dissipation, and associate it with the new turbulence length scale. This effective dissipation can then be calculated as a residuum in the TKE budget equation (for horizontal sub-domains of different sizes) using LES data. Estimation of the scale dependence of the diagnosed turbulence length scale using this novel method is presented for several idealized cases.
Inappropriate land management leads to soil loss with destruction of the land’s resource and sediment input into the receiving river. Part of the sediment budget of a catchment is the estimation of soil loss. In the Ruzizi catchment in the Eastern Democratic Republic of the Congo (DRC), only limited research has been conducted on soil loss mainly dealing with local observations on geomorphological forms or river load measurements; a regional quantification of soil loss is missing so far. Such quantifications can be calculated using the Universal Soil Loss Equation (USLE). It is composed of four factors: precipitation (R), soil (K), topography (LS), and vegetation cover (C). The factors can be calculated in different ways according to the characteristics of the study area. In this paper, different approaches for calculating the single factors are reviewed and validated with field work in two sub-catchments of Ruzizi River supplying the water for the reservoirs of Ruzizi I and II hydroelectric dams. It became obvious that the (R)USLE model provides the best results with revised R and LS factors. C factor calculations required to conduct a supervised classification using the Maximum Likelihood Procedure. Different C factor values were assigned to the land cover classes. The calculations resulted in a soil loss rate for the predominantly occurring Ferralsols and Leptosols of around 576 kt/yr in both catchments, when 2016 landcover and precipitation are used. This represents an area-normalized value of 40.4 t/ha/yr for Ruzizi I and 50.5 t/ha/yr for Ruzizi II due to different landcover in the two sub-catchments. The mean value for the whole study area is 47.8 t/ha/yr or even 27.1 t/ha/yr when considering land management techniques like terracing on the slopes (P factor). This work has shown that the (R)USLE model can serve as an easy to handle tool for soil loss quantification when comprehensive field work results are sparse. The model can be implemented in Geographic Information Systems (GIS) with free data; hence, a validation is crucial. It becomes apparent that the use of high resolution Sentinel 2a MSI data as the basis for C factor calculations is an appropriate method for considering heterogeneous Land Use Land Cover (LULC) patterns. To transfer the approach to other regions, the calculation of factor R needs to be modified
In order to encourage a shift from the car to the more sustainable transport mode of cycling, cycle streets have been implemented in cities all over the world in the last few years. In these shared streets, the entire carriageway is designated for cyclists, while motorized traffic is subordinated. However, evidence on the impact of cycle street interventions related to travel behavior change has been limited until now. Therefore, the objective of this study was to evaluate whether cycle streets are an effective measure to facilitate bicycle use and discourage car use, thus contributing to the aim of promoting sustainable travel. For this purpose, we conducted a written household survey in the German city of Offenbach am Main involving participants affected by a cycle street intervention (n = 701). Based on two stage models of self-regulated behavioral change (SSBC), we identified the participants’ level of willingness to use a bicycle frequently and to reduce car use. By means of bivariate and multivariate statistical methods, we analyzed the influence of awareness, use, and perceptions of the cycle street on the willingness to change behavior towards more sustainable travel. The results show that the intervention has a positive impact on frequent bicycle use, while we observed only a limited effect on car use reduction. Traffic conflicts and car speeding within the cycle street adversely affect the acceptance of the intervention. The study’s findings provide new insights into the actual effects of a cycle street and its potential to encourage sustainable travel behavior.