530 Physik
Refine
Document Type
- Article (8)
- Contribution to a Periodical (1)
Has Fulltext
- yes (9)
Is part of the Bibliography
- no (9)
Keywords
- 208Pb(32,34S,X) (1)
- E=115–175 MeV (1)
- Fluid dynamics (1)
- Information theory and computation (1)
- Nuclear reactions, 197Au (1)
- Theoretical nuclear physics (1)
- coupling to neutron transfer channels (1)
- deduced, representations of fusion barrier distributions (1)
- fusion dynamics (1)
- measured, quasi-elastic scattering excitation functions (1)
Institute
- Geowissenschaften (9) (remove)
Non-matrix-matched calibration of laser ablation ICPMS (trace/major) element data is a common quantification strategy. However, LA sampling is associated with downhole elemental fractionation, potentially causing inaccuracies if the magnitude of fractionation between the sample and reference material (RM) differs. Here, we estimate fractionation factors (FFs) for different elements (El) in a range of RMs relative to NIST SRM610/612 (FFEl/Ca-NIST) and evaluate element-specific corrections for downhole fractionation using these measured FFEl/Ca-NIST. Significantly different mean El/Ca values were observed before and after correction, particularly for the alkali elements (all RMs), and B, Fe, and Zn (some RMs), notably improving accuracy, especially for the alkali elements. In cases where this methodology does not result in an accuracy improvement, this may help identify underlying issues in reported/reference values for RMs, given that this phenomenon should be accounted for. Overall, we recommend considering routine assessment of FFs and applying a FF correction to enhance data quality.
Rationale: Potassium (K) is a major component of several silicate minerals and seawater, and, therefore, constraining past changes in the potassium cycle is a promising way of tracing large-scale geological processes on Earth. However, [K] measurement using inductively coupled plasma mass spectrometry (ICP-MS) is challenging due to an ArH+ interference, which may be of a similar magnitude to the K+ ion beam in samples with <0.1% m/m [K].
Methods: In this work, we investigated the effect of the ArH+ interference on K/Ca data quality by comparing results from laser-ablation (LA)-ICP-MS measured in medium and high mass resolution modes and validating our LA results via solution ICP-optical emission spectroscopy (OES) and solution ICP-MS measurements. To do so, we used a wide range of geological reference materials, with a particular focus on marine carbonates, which are potential archives of past changes in the K cycle but are typically characterised by [K] < 200 μg/g. In addition, we examine the degree to which trace-element data quality is driven by downhole fractionation during LA-ICP-MS measurements.
Results: Our results show that medium mass resolution (MR) mode is sufficiently capable of minimising the effect of the ArH+ interference on K+. However, the rate of downhole fractionation for Na and K varies between different samples as a result of their differing bulk composition, resulting in matrix-specific inaccuracy. We show how this can be accounted for via downhole fractionation corrections, resulting in an accuracy of better than 1% and a long-term reproducibility (intermediate precision) of <6% (relative standard deviation) in JCp-1NP using LA-ICP-MS in MR mode.
Conclusion: Our [K] measurement protocol is demonstrably precise and accurate and applicable to a wide range of materials. The measurement of K/Ca in relatively low-[K] marine carbonates is presented here as a key example of a new application opened up by these advances.
Measurement of iodine species and sulfuric acid using bromide chemical ionization mass spectrometers
(2021)
Iodine species are important in the marine atmosphere for oxidation and new-particle formation. Understanding iodine chemistry and iodine new-particle formation requires high time resolution, high sensitivity, and simultaneous measurements of many iodine species. Here, we describe the application of a bromide chemical ionization mass spectrometer (Br-CIMS) to this task. During the iodine oxidation experiments in the Cosmics Leaving OUtdoor Droplets (CLOUD) chamber, we have measured gas-phase iodine species and sulfuric acid using two Br-CIMS, one coupled to a Multi-scheme chemical IONization inlet (Br-MION-CIMS) and the other to a Filter Inlet for Gasses and AEROsols inlet (Br-FIGAERO-CIMS). From offline calibrations and intercomparisons with other instruments, we have quantified the sensitivities of the Br-MION-CIMS to HOI, I2, and H2SO4 and obtained detection limits of 5.8 × 106, 3.8 × 105, and 2.0 × 105 molec. cm−3, respectively, for a 2 min integration time. From binding energy calculations, we estimate the detection limit for HIO3 to be 1.2 × 105 molec. cm−3, based on an assumption of maximum sensitivity. Detection limits in the Br-FIGAERO-CIMS are around 1 order of magnitude higher than those in the Br-MION-CIMS; for example, the detection limits for HOI and HIO3 are 3.3 × 107 and 5.1 × 106 molec. cm−3, respectively. Our comparisons of the performance of the MION inlet and the FIGAERO inlet show that bromide chemical ionization mass spectrometers using either atmospheric pressure or reduced pressure interfaces are well-matched to measuring iodine species and sulfuric acid in marine environments.
Two types of particles exist in the atmosphere, primary and secondary particles. While primary particles such as soot, mineral dust, sea salt particles or pollen are introduced directly as particles into the atmosphere, secondary particles are formed in the atmosphere by condensation of gases. The formation of such new aerosol particles takes place frequently and at a broad variety of atmospheric conditions and geographic locations. A considerable fraction of the atmospheric particles is formed by such nucleation processes. The newly formed particles may grow by condensation to sizes where they are large enough to act as cloud condensation nuclei and therefore may affect cloud properties. The fundamental processes of aerosol nucleation are described and typical atmospheric observations are discussed. Two recent studies are introduced that potentially change our current understanding of atmospheric nucleation substantially.
A primordial state of matter consisting of free quarks and gluons that existed in the early universe a few microseconds after the Big Bang is also expected to form in high-energy heavy-ion collisions. Determining the equation of state (EoS) of such a primordial matter is the ultimate goal of high-energy heavy-ion experiments. Here we use supervised learning with a deep convolutional neural network to identify the EoS employed in the relativistic hydrodynamic simulations of heavy ion collisions. High-level correlations of particle spectra in transverse momentum and azimuthal angle learned by the network act as an effective EoS-meter in deciphering the nature of the phase transition in quantum chromodynamics. Such EoS-meter is model-independent and insensitive to other simulation inputs including the initial conditions for hydrodynamic simulations.
We have developed and characterized the novel PTR3, a proton transfer reaction-time-of-flight mass spectrometer (PTR-TOF) using a new gas inlet and an innovative reaction chamber design. The reaction chamber consists of a tripole operated with rf voltages generating an electric field only in the radial direction. An elevated electrical field is necessary to reduce clustering of primary hydronium (H3O+) and product ions with water molecules present in the sample gas. The axial movement of the ions is achieved by the sample gas flow only. Therefore, the new design allows a 30-fold longer reaction time and a 40-fold increase in pressure compared to standard PTR-TOF-MS. First calibration tests show sensitivities of up to 18000 counts per second/parts per billion and volume (cps/ppbv) at a mass resolution of >8000 m/Δm (fwhm). The new inlet using center-sampling through a critical orifice reduces wall losses of low volatility compounds. Therefore, the new PTR3 instrument is sensitive to VOC typically present in the ppbv range as well as to semivolatile organic compounds (SVOC) and even highly oxidized organic molecules (HOMs) present in the parts per quadrillion per volume (ppqv) range in the atmosphere.
We discuss applications of a recently developed method for model reduction based on linear response theory of weakly coupled dynamical systems. We apply the weak coupling method to simple stochastic differential equations with slow and fast degrees of freedom. The weak coupling model reduction method results in general in a non-Markovian system; we therefore discuss the Markovianization of the system to allow for straightforward numerical integration. We compare the applied method to the equations obtained through homogenization in the limit of large timescale separation between slow and fast degrees of freedom. We numerically compare the ensemble spread from a fixed initial condition, correlation functions and exit times from a domain. The weak coupling method gives more accurate results in all test cases, albeit with a higher numerical cost.
Excitation functions for quasi-elastic scattering have been measured at backward angles for the systems 32,34S+197Au and 32,34S+208Pb for energies spanning the Coulomb barrier. Representative distributions, sensitive to the low energy part of the fusion barrier distribution, have been extracted from the data. For the fusion reactions of 32,34S with 197Au couplings related to the nuclear structure of 197Au appear to be dominant in shaping the low energy part of the barrier distibution. For the system 32S+208Pb the barrier distribution is broader and extends further to lower energies, than in the case of 34S+208Pb. This is consistent with the interpretation that the neutron pick-up channels are energetically more favoured in the 32S induced reaction and therefore couple more strongly to the relative motion. It may also be due to the increased collectivity of 32S, when compared with 34S.