Doctoral Thesis
Refine
Year of publication
Document Type
- Doctoral Thesis (281) (remove)
Language
- English (281) (remove)
Has Fulltext
- yes (281)
Is part of the Bibliography
- no (281)
Keywords
- Membranproteine (6)
- NMR-Spektroskopie (5)
- RNA (4)
- ABC-Transporter (3)
- Biochemie (3)
- Crystallography (3)
- Kristallographie (3)
- Photosynthese (3)
- Proteinfaltung (3)
- Biochemistry (2)
Institute
- Biochemie und Chemie (281) (remove)
This thesis presents a 5.9 Å map of yeast FAS obtained by cryo-electron microscopy using single particle analysis (SPA). The EM-map has been analyzed both by quantitative and qualitative analysis to aid in understanding of the structure and dynamics of yeast FAS. This study approaches the factors limiting the resolution in EM (>20 Å) and further discusses the possibilities of achieving higher-resolutions (<10 Å) in cryo-EM by single particle analysis. Here, SPA is highlighted as a powerful tool for understanding the structure and dynamics of macro-molecular complexes at near native conditions. Though SPA has been used over the last four decades, the low-resolution range (20-30 Å) of the method has limited its use in structural biology. Over the last decade, sub nanometer resolution (<10 Å) structures solved by SPA have been reported --both in studies involving symmetric particles, such as GroEL (D7) and asymmetric particles, such as ribosomes (C1). Recently, near-atomic resolution in the range of 3.8-4.2 Å has been achieved in cases of highly symmetric icosahedral viral capsid structures as well. The yeast FAS structure (D3) presented here is one of two low symmetry structures submitted to the EM-database in a resolution range of 5-6 Å; the other being GroEL (D7). Fatty acid synthase (FAS) is the key enzyme for the biosynthesis of fatty acids in living organisms. There are two types of FAS, namely the type II FAS system in prokaryotes, consisting of a set of individual enzymes, and type I FAS found in eukaryotes as a multienzyme complex. Yeast fatty acid synthase (FAS) is a 2.6 MDa barrel-shaped multienzyme complex, which carries out cyclic synthesis of fatty acids. By electron cryomicroscopy of single particles we obtained a 3D map of yeast FAS at 5.9 Å resolution. Compared to the crystal structures of fungal FAS, the EM map reveals major differences and new features that indicate a considerably different arrangement of the complex in solution, as well as a high degree of variance inside the barrel. Distinct density regions in the reaction chambers next to each of the catalytic domains fit well with the substratebinding acyl carrier protein (ACP) domain. In each case, this resulted in the expected distance of ~18 Å from the ACP substrate binding site to the active site of the catalytic domains. The multiple, partially occupied positions of the ACP within the reaction chamber provide direct insight into the proposed substrate-shuttling mechanism of fatty acid synthesis in this large cellular machine.
Acute myeloid leukemia (AML) is a hematopoietic cell disorder characterized by a block in differentiation and increased proliferation and survival of malignant blasts. Expansion of the malignant cell clone effects the normal production of blood cells and – if left untreated – leads to death. Receptor tyrosine kinases (RTKs) play an important role in the pathogenesis of AML, as they are either often mutated or overexpressed. In normal hematopoiesis, RTK signal termination is tightly controlled, and involves ubiquitination, internalization, endocytosis and degradation. Cbl proteins are E3 ligases and have been shown to ubiquitinate several activated RTKs, including Flt3 and Kit, targeting them for degradation. Recently, several Cbl mutations have been identified: Cbl-R420Q was identified in an AML patient and Cbl-70Z was identified in a mouse lymphoma model. In this thesis work, the role of these Cbl mutants in Kit signaling and in a mouse transplantation model was studied. Cbl mutants (Cbl-R420Q, Cbl-70Z) have the ability to transform the myeloid 32D cell line in cooperation with Kit WT. Cbl mutants along with Kit promoted interleukin-3 (IL3)-independent proliferation and enhanced the cell survival of 32D cells. In contrast, expression of the Cbl mutants alone did not confer IL3-independent growth. Stem cell factor (SCF, the Kit ligand) dependent growth was enhanced in the presence of Cbl mutants and Cbl mutants promoted colonogenic growth in the presence of Kit. Furthermore, Cbl mutants inhibited the ubiquitination of the activated Kit receptor. In addition, Cbl mutants inhibited the endocytosis of the activated Kit receptor. Retroviral expression of Cbl mutants in transplanted bone marrow induced a generalized mastocytosis, a myeloproliferative disease and, in rare care cases, myeloid leukemia. Splenomegaly was observed in the presence of Cbl mutants. Furthermore, mast cells with variable range of infiltration were noticed in all the vital organs (spleen, liver, bone marrow, lung, kidney, heart) of Cbl (mutant) transplanted mice. Almost all recipients of bone marrow cells transduced with Cbl mutants developed a lethal hematologic disorder with a mean latency of 341 days in the Cbl-R420Q group and 395 days in the Cbl-70Z group. This is the first published report on a hematological disease with Cbl mutants in a mouse model. Co-immunoprecipitation studies indicated that Cbl-70Z binds to Kit, even in the absence of Kit ligand. Cbl-R420Q also bound to Kit in the absence of SCF, albeit to a lesser extent. Association of Cbl mutants to Kit was enhanced in the presence of SCF. Signaling studies demonstrated the constitutive activation of Akt and Erk in the presence of Cbl mutants and Kit. In addition, Cbl mutants enhanced the SCF-dependent Kit, Akt and Erk activation. Cbl-70Z, in association with kinase-dead Kit (Kit-KD) or kinase-dead Flt3 (Flt3-KD), conferred IL3-independent growth and survival to the myeloid 32D cell line. Cbl-R420Q provided only a slight growth advantage in the presence of Kit-KD. As demonstrated by pharmacological inhibition studies, Akt activation was necessary for the transformation mediated by Cbl-70Z and Kit-KD / Flt3-KD. Cbl mutants enhanced the Src family kinases (SFKs) activity. The pharmacological inhibition of SFK activity inhibited the proliferation and colonogenic growth. Interaction was found between Cbl-70Z, SFKs and Kit-KD. The SFK member Fyn was identified to bind to Cbl. In addition, kinase activity of SFKs was necessary for binding to Cbl, since SFKs inhibition by PP-2 abolished the binding between the complex-binding partners. Dasatinib and PP-2, both SFK inhibitors, inhibited the Cbl and Akt phosphorylation indicating that Fyn acts upstream of Akt. Inhibition of Kit with imatinib reduced the proliferation of cells overexpressing Kit WT and Cbl-70Z much stronger compared with cells expressing Kit-KD and Cbl-70Z, but much less than the dual KIT/SFK inhibitor dasatinib. This indicated that Kit kinase activity was required but not essential. The data presented in this thesis work implies that both RTK and SFK inhibition may have to be targeted, in order to effectively prevent transformation. In summary, the present thesis work indicates an important role of Cbl, Kit and SFKs in myeloid transformation and deregulated signal transduction.
This thesis demonstrates the advancement of PELDOR spectroscopy beyond its original design of distance measurements in order to disentangle a maximum amount of information additionally encoded in the PELDOR data. In particular, the successful synthesis of novel polynitroxide radicals is described as well as the extraction of the relative orientation of spin labels, conformational flexibility and the separation of dipolar and exchange coupling via orientation selective PELDOR measurements in combination with PESIM based simulations. Moreover, the method of PELDOR "Spin Counting" was experimentally validated.
The transporter associated with antigen processing-like (TAPL) acts as a lysosomal ATP-dependent polypeptide transporter with broad length selectivity. To characterize in detail its substrate specificity, a procedure for solubilization, purification and functional reconstitution of human TAPL was developed. TAPL was expressed in Sf9 insect cells with the baculovirus expression system and solubilized from crude membranes. By intensive screening of detergents, the mild non-ionic detergents digitonin and dodecylmaltoside were found to be ideal for solubilization with respect to efficiency, long term stability, and functionality of TAPL. TAPL was isolated in a two-step procedure with a yield of 500 micro g/L cell culture and, subsequently, reconstituted into proteoliposomes. The KM(pep) for the peptide RRYCfKSTEL (f refers to fluorescence label) and KM(ATP) were determined to be 10.5 ± 2.3 micro M and 97.6 ± 27.5 micro M, respectively, which are in the same range as the Michaelis-Menten constants determined in the membranes. The peptide transport activity of the reconstituted TAPL strongly depends on the lipid composition. Interestingly, the E. coli lipids are prefered over other tested natural lipids extracts. Moreover, phosphatidylcholine, the most abundant phospholipid in eukaryotic cells influenced TAPL activity in a dose dependent manner. In addition, some negatively charged lipids like DOPA and DOPS increased peptide transport activity with preference for DOPS. However, DOPE or egg PG which are also negatively charged had no effect. It seems not only the charge but also the specific head group of phospholipids that has impact on the function of TAPL. With the help of combinatorial peptide libraries containing D-amino acid residues at defined positions as well as bulky fluorescein labeled peptides, the key positions of the peptides were localized to the N- and C-terminal residues with respect to peptide transport. The C-terminal position has the strongest selectivity since modification at this position shows strongest impact on peptide transport. Additionally, positions 2 and 3 of the peptide also have weak influence on peptide selectivity. Subsequently, the residue preferences at the key positions were systematically investigated by combinatorial peptide libraries with defined residues at certain positions. At both ends, TAPL favors positively charged, aromatic, or hydrophobic residues and disfavors negatively charged residues as well as asparagine and methionine. The residue preferences at the key positions are valid for peptide substrates with different length, indicating a general rule for TAPL selectivity. Besides specific interactions of both terminal residues, electrostatic interactions are important, since peptides with positive net charge are more efficiently transported than negatively charged ones. By size exclusion chromatography (SEC) and blue native PAGE, TAPL purified in the presence of digitonin or dodecylmaltoside had an apparent molecular weight of 200 kDa which is close to the theoretical molecular mass of the TAPL homodimer (172 kDa). The purified and reconstituted TAPL showed specific ATP hydrolysis activity which can be inhibited by orthovanadate. TAPL in proteoliposomes showed 6-fold higher ATP hydrolysis than digitonin solubilized protein, indicating the phospholipids impact on TAPL function. However, no peptide substrate stimulated ATPase activity was observed. For site-specific labeling of TAPL, eight cysteines in each half transporter were replaced by alanine or valine. The TAPL cys-less mutant showed the same peptide transport activity as TAPL wt. Based on the functional TAPL cys-less mutant, seven single cysteine mutants were introduced into strategic positions. All single cysteine mutants in the TMD did not influence peptide transport, whereas the mutant L701C, which is close to the conserved H-loop motif, displayed impaired transport. TAPL orthologs Haf-4 and Haf-9 from Caenorhabditis elegans possess around 40% sequence identities with TAPL and 50% with each other. Both proteins are putative half transporters and reported to be involved in the intestinal granule formation (Bauer, 2006; Kawai et al., 2009). To further understand the physiological functions of these two proteins, they were expressed in Sf9 insect cells. Haf-4 and Haf-9 showed weak but specific ATP- and peptide-dependent peptide transport activity for the given peptide RRYCfKSTEL. Therefore, it was proposed that the physiological roles for Haf-4 and Haf-9 might be related to their peptide transport activity. Besides forming functional homodimeric complex as estimated by the peptide transport activities, both half transporter could also form heteromers which was confirmed by coimmunoprecipitation. However, the heteromers showed decreased transport activity.
5-lipoxygenase (5-LO) is the key enzyme in the formation of inflammatory leukotrienes, which are mediators of inflammation and allergy. The 5-LO catalyses the oxidation of arachidonic acid to 5-HPETE and subsequently to LTA4. The leukotrienes are involved in the development and maintenance of inflammatory diseases, like asthma and allergic rhinitis. Additionally, 5-LO is overexpressed in some cancer types, although its relevance is still not fully understood. 5-LO expressing cells are B- lymphocytes and cells of myeloid origin like monocytes, macrophages and granulocytes. The 5-LO promoter lacks a TATA or CCAT box and covers two CpG islands. These are characteristics of a housekeeping gene, but as the 5-LO is not expressed ubiquitiously, the expression of the 5-LO is tightly regulated. Epigenetic mechanisms were known to be involved in the control of the 5-LO expression. The HDAC inhibitor TsA significantly induced the transcriptional activity of the 5-LO promoter in reporter gene assays as well as on 5-LO mRNA transcript level in MM6 cells. The GC-boxes GC4 and GC5 in the proximal 5-LO promoter were identified to be essential for the TsA effect, as deletion of these element led to an attenuated TsA effect in reporter gene assay. Recruitment of the transcription factors Sp1 and Sp3 and the RNA polymerase II to the 5-LO promoter was detectable after TsA treatment in MM6 cells by chromatin immunoprecipitation assays (ChIP), while the acetylation status of histone H4 remained unchanged. Likewise it is known that DNA methylation leads to silencing of 5-LO expression in-vitro and in-vivo. The 5-LO promoter is densely methylated in the cell line U937, but unmethylated in HL-60 cells and - elucidated in this study - also in MM6 cells. Reporter gene assays with in-vitro methylated 5-LO promoter containing plasmids revealed that the frequency of methylated CpGs is directly proportional to reduction of 5-LO promoter activity. Incubation of U937 cells with 5-AdC, an inhibitor of DNA methyltransferases, was able to reactivate 5-LO transcription and to demethylate CpG dinucleotides. In the first part of this study the mechanism of TsA induced promoter activation was further investigated. I elucidated the mechanism of Sp1 and Sp3 recruitment to the 5-LO promoter after TsA treatment. Immnoprecipitation assay was used to detect a transcription factor complex containing Sp1 or Sp3 interacting with HDAC proteins, which might change its composition after TsA treatment. Besides the posttranslational modifications of the transcription factors Sp1 and Sp3 after TsA treatment were investigated, potentially causing an increased interaction of the proteins with the 5-LO promoter. Both aspects and their response in HDAC inhibition have been described. TsA did not affect the composition of the Sp1/HDAC1/HDAC2 complex. Sp3 was not located in a complex with the HDAC enzymes. Acetylation of Sp1 and Sp3 was detectable, but no change occurred after TsA treatment. Since neither release of the transcription factors off a complex, nor alterations in posttranslational modifications of Sp1 and Sp3 are the reason for the increased Sp1 and Sp3 binding to the 5-LO promoter, I elucidated alterations in the chromatin structure. The acetylation status of the histone proteins H3 and H4, as well as the chromatin marks H3K4me3, representing active chromatin, and H3K9me, representative for repressive state, were investigated. Additionally, the time course of the TsA effect was determined on 5-LO mRNA level using real-time PCR. The acetylation status of the histone proteins on the 5-LO core promoter correlated with the basal 5-LO mRNA transcript expression in MM6, HL-60 and U937 cells. The highest 5-LO mRNA level was detectable in MM6 cells, followed by HL-60 cells. The lowest 5-LO mRNA level was detected in 5-LO promoter methylated U937 cells. The order of the basal 5-LO mRNA expression of the three cell lines correlates with the basal acetylation status of histone proteins H3 and H4. In MM6 cells the highest basal levels in acH3 and acH4 were detected, followed by HL-60 and U937 cells. Moreover, the data obtained in U937 cells revealed that the correlation between DNA methylation and histone hypoacetylation is alike on the 5-LO promoter. TsA treatment induced the 5-LO mRNA level in the three cell lines with different intensity: 5-LO mRNA level in MM6 cells was induced 11-fold, in HL-60 cells 6- fold and in U937 cells 4- fold. The histone acetylation and methylation levels on the 5-LO promoter after TsA incubation were investigated. No increase in acH3 and acH4, but in H3K4me3 was detectable in MM6 cells by ChIP assay. HL-60 cells showed an increase in acH3 and acH4 as well as in H3K4me3. H3K9me was only detectable in untreated U937 cells, but disappeared after TsA treatment, while acH3, acH4 and H3K4me3 increased constantly after TsA treatme nt. A strong correlation between the histone modifications and the time course of the mRNA expression was detectable in all three cell lines. The combination of the posttranslational modifications acH3, acH4 and H3K4me3 led to a fast effect in transcriptional activation and the maxima of acH3 and acH4 were usually associated with the maximum in 5-LO mRNA transcript level. An increase in H3K4me3 alone, as detected in MM6 cells, led to continuous increase in the 5-LO mRNA expression with a late maximum. Additionally, we detected a slight overall decrease in 5-LO promoter methylation in U937 cells after TsA treatment. This fact taken together with the observed histone modifications could explain the 4- fold response in 5-LO mRNA level to TsA treatment of the methylated cell line U937. Another aim of the present study was to identify the specific HDAC enzymes involved in the 5-LO promoter regulation. Reporter gene assays and real-time PCR with selective HDAC inhibitors revealed that HDACs of class I are involved in 5-LO promoter regulation, namely HDAC 1, 2 and 3. The influence of each of the enzymes seemed to depend on the cell type, as inhibition of HDACs 2, 3 strongly induced 5-LO promoter activity in reporter gene assay in HeLa cells, whereas in MM6 cells HDACs 1 and 2, 3 seemed to be responsible for the 5-LO promoter regulation, measured as 5-LO mRNA level. The HDACs of class IIa and class III are not involved in the regulation of 5-LO mRNA expression. The second part of this study investigated the influence of MBD proteins on the methylated 5-LO promoter and the 5-LO mRNA expression. ChIP assays revealed MBD1, 2 and MeCP2 protein binding to the proximal 5-LO promoter in U937 cells. MBD1 was detectable on the 5-LO promoter in unmethylated HL-60 cells, while no MBD protein was located on the 5-LO promoter in MM6 cells. To elucidate the functional role of the MBD proteins, stable knocked down of MBD proteins was established in U937 cells. 5-LO mRNA transcript level was determined in the knock down clones by real-time PCR. The 5-LO transcript level was increased in all knock down samples. MBD2 knock down clones showed the highest effect in activating 5-LO with a 3- and 4.4-fold increase in the 5-LO mRNA level, followed by MBD1 (3.5- fold) and MeCP2 (2.5-fold) knock down clones. A combined participation of these three enzymes in the corepression of the methylated 5-LO promoter is indicated. Taken together, the data reveal that epigenetic mechanisms are strongly involved in the regulation of 5-LO transcription and might function as a crucial control mechanism of 5-LO expression.
Solid state NMR is a emerging method for the study of membrane proteins, which has received much interest in recent years. Limiting the study of many pharmacologically relevant targets, are the often long measuring times, required to obtain especially higher dimensional solid state NMR spectra of good quality. To address this problem, multiple methods where developed in this work, which can be categorized into two groups. The first set of methods aims at the quality of certain spectra, by implementing a spectral filter, which increases the fidelity of the measured data. The second set of methods, addresses the problem of long measuring times directly, by increasing the sensitivity per unit time, as could be shown, for example, on homo- and heteronuclear singlequantum-singlequantum correlation experiments. The gains in measuring time for the latter group of methods are typically in the order of 2-3, but some experiments allow multiple methods to be employed simultaneously, which can lead to a decrease in measuring time of a factor of up to 8. It is important to mention, that none of the methods introduced in this work require any equipment in addition to the conventional setup present in most sold state NMR laboratories and no changes or addition to the samples under study are required. Therefore the gains reported in this work come at no extra cost and require only minimal implementation effort on the side of the user.
In the production of integrated circuits (ICs), photolithography plays a key role in wafer structuring. The basic principle of photolithography is the selective processing of areas (etching, implantation, metallisation etc.) while the others are covered and therefore protected by the resist. After each process step the resist, now modified, has to be removed. In the history of semiconductor manufacturing this has been accomplished with a mixture of H2SO4 and H2O2, H2SO4 and O3 or a plasma etch. As the structure sizes decreased they reached a stage where they had to be exposed to light of shorter wavelengths for the photolithography, going from i-line (365 nm) to DUV (248 nm and 193 nm). This change in wavelength now requires new resists and therewith new stripping methods. Beside the changes in the resist the finer structures are also more sensitive to damages caused by the resist strip. Along with this the demand for cost reduction and environment-friendliness poses a big challenge for modern resist stripping. In this study ozone in deionised water (DI/O3) was the basic chemistry investigated as it is cost efficient in production and disposal as well as environment friendly. Furthermore it is a chemistry known to cause no damage to the wafers. DI/O3 has been successfully applied to strip i-line resists. The challenge now is to find ways and means to make DI/O3 strip even highly implanted DUV resists which currently can only be removed by a plasma etch. To achieve this a detailed understanding of the behaviour of ozone in DI water and the influence of factors both chemical and physical on the stripping efficiency at the different stages in the process is necessary. Along with this, methods which enable the elucidation of resist structures and the changes they undergo during the process of photolithography as well as during the ozone strip have to be developed. This will enable us to understand the mechanisms involved and hence, ideally, develop ozone-based stripping solutions customized for each resist and process step. For this purpose the ozone decomposition in DI water with and without additives was studied via UV-Vis spectroscopy. Radicals generated within the ozone decomposition were trapped and quantified, the resists were studied directly on the wafer with IR and Raman spectroscopy and stripped with DI/O3-mixtures and different setups to find optimum conditions for a complete and damage free resist strip. UV-Vis spectroscopy at 260 nm was used to study ozone decomposition and the factors, both chemical and physical, which influence it. These factors are pH, different additives at the same pH, temperature and mixing of the solution. For the radical determination trapping reactions with MeOH and DMSO both forming CH2O which is further converted to DDL as the detectable species were compared with a variation of the classical iodometric titration acting as an absolute method without the need of calibration. IR spectroscopy proved to be a suitable method for the structural characterisation of the resists and the tracking of the changes undergone during the various processing steps as well as the ozone based stripping. For the stripping with DI/O3 IR spectroscopy delivered well-defined spectra. These displayed significant peak changes which support the assumption of classical ozonolysis as the decomposition mechanism for the unimplanted resist. For the study of the resist crust originating from ion implantation IR was fundamentally unsuitable and was replaced by Raman spectroscopy and microscopy. Raman spectra showed the crust to be of a highly carbon containing structure. Regrettably, the peak assignable to the crust was too broad for the exact composition of the crust to be determined. The wavelength region of the peak corresponds to that of peaks of glassy carbon and highly ordered and conventional graphite. Such a broad peak suggests that the structure of the crust is not uniform but contains more than one carbon modification. As the purpose of all these studies is to enable or improve DI/O3 based resist stripping on unimplanted as well as high-dose implanted resists the removal efficiency of DI/O3 spiked with different additives that alter the pH was studied. For these unimplanted resists the maximum efficiency could be achieved at pH = 5 – 7. Lowering or increasing the pH beyond this range gave poor results. The stripping of highly implanted resists could be achieved only at harsh conditions with a high pH-level of 12 - 13 with a narrow process window showing no stripping at lower pHs and severe damages at higher levels. The principle application of DI/O3 stripping chemistry could be proved but the currently required process time unfortunatelly is too long for commercial application and needs further optimisation.
Misregulated receptor tyrosine kinases (RTKs), i.e. the epidermal growth factor receptor EGFR or the insulin-like growth factor receptor 1 (IGF-1R), can be involved in the development of cancer. Monoclonal antibodies specifically inhibit the RTKs in cancer therapy. The scope of this thesis is to investigate the molecular basis of the inhibition through the therapeutic antibodies matuzumab (EMD72000) against EGFR and EMD1159476 against IGF-1R. The 3D crystal structure of matuzumab in complex with the EGFR domain III shows an eptiope connected with a novel inhibition mechanism: a non-competitive, sterical inhibition of receptor acitivation. The anti-IGF-1R targeted monoclonal antibody EMD1159476 shows a reduced binding capacity to the receptor in the presence of ligand indicating a competitive inhibition mechanism. The epitope of EMD1159476 is within domain II of the receptor. The results of these molecular interaction studies are important for the clinical therapies with these monoclonal antibodies. The matuzumab-EGFR complex crystal structure shows that a simultaneous binding of matuzumab and cetuximab (Erbitux) is possible. The latter antibody is already in clinical use. A combination of several therapeutic antibodies in cancer treatment might show synergistic effects and benefits for the patients.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Specific functions of biological systems often require conformational transitions of macromolecules. Thus, being able to describe and predict conformational changes of biological macromolecules is not only important for understanding their impact on biological function, but will also have implications for the modelling of (macro)molecular complex formation and in structure-based drug design approaches. The “conformational selection model” provides the foundation for computational investigations of conformational fluctuations of the unbound protein state. These fluctuations may reveal conformational states adopted by the bound proteins. The aim of this work is to incorporate directional information in a geometry-based approach, in order to sample biologically relevant conformational space extensively. Interestingly, coarse-grained normal mode (CGNM) approaches, e.g., the elastic network model (ENM) and rigid cluster normal mode analysis (RCNMA), have emerged recently and provide directions of intrinsic motions in terms of harmonic modes (also called normal modes). In my previous work and in other studies it has been shown that conformational changes upon ligand binding occur along a few low-energy modes of unbound proteins and can be efficiently calculated by CGNM approaches. In order to explore the validity and the applicability of CGNM approaches, a large-scale comparison of essential dynamics (ED) modes from molecular dynamics (MD) simulations and normal modes from CGNM was performed over a dataset of 335 proteins. Despite high coarse-graining, low frequency normal modes from CGNM correlate very well with ED modes in terms of directions of motions (average maximal overlap is 0.65) and relative amplitudes of motions (average maximal overlap is 0.73). In order to exploit the potential of CGNM approaches, I have developed a three-step approach for efficient exploration of intrinsic motions of proteins. The first two steps are based on recent developments in rigidity and elastic network theory. Initially, static properties of the protein are determined by decomposing the protein into rigid clusters using the graph-theoretical approach FIRST at an all-atom representation of the protein. In a second step, dynamic properties of the molecule are revealed by the rotations-translations of blocks approach (RTB) using an elastic network model representation of the coarse-grained protein. In the final step, the recently introduced idea of constrained geometric simulations of diffusive motions in proteins is extended for efficient sampling of conformational space. Here, the low-energy (frequency) normal modes provided by the RCNMA approach are used to guide the backbone motions. The NMSim approach was validated on hen egg white lysozyme by comparing it to previously mentioned simulation methods in terms of residue fluctuations, conformational space explorations, essential dynamics, sampling of side-chain rotamers, and structural quality. Residue fluctuations in NMSim generated ensemble is found to be in good agreement with MD fluctuations with a correlation coefficient of around 0.79. A comparison of different geometry-based simulation approaches shows that FRODA is restricted in sampling the backbone conformational space. CONCOORD is restricted in sampling the side-chain conformational space. NMSim sufficiently samples both the backbone and the side-chain conformations taking experimental structures and conformations from the state of the art MD simulation as reference. The NMSim approach is also applied to a dataset of proteins where conformational changes have been observed experimentally, either in domain or functionally important loop regions. The NMSim simulations starting from the unbound structures are able to reach conformations similar to ligand bound conformations (RMSD < 2.4 Å) in 4 out of 5 cases of domain moving proteins. In these four cases, good correlation coefficients (R > 0.7) between the RMS fluctuations derived from NMSim generated structures and two experimental structures are observed. Furthermore, intrinsic fluctuations in NMSim simulation correlate with the region of loop conformational changes observed upon ligand binding in 2 out of 3 cases. The NMSim generated pathway of conformational change from the unbound structure to the ligand bound structure of adenylate kinase is validated by a comparison to experimental structures reflecting different states of the pathway as proposed by previous studies. Interestingly, the generated pathway confirms that the LID domain closure precedes the closing of the NMPbind domain, even if no target conformation is provided in NMSim. Hence, the results in this study show that, incorporating directional information in the geometry-based approach NMSim improves the sampling of biologically relevant conformational space and provides a computationally efficient alternative to state of the art MD simulations.
This thesis describes the structural characterization of interactions between biological relevant ribonucleic acid biomacromolecules (RNAs) and selected ligands to optimize the methodologies for the design of pharmacological lead compounds. To achieve this aim, not only the structures of the RNA, the ligand and their complexes need to be known, but also information about the inherent dynamics, especially of the target RNA, are necessary. To determine the structure and dynamics of these molecules and their complexes, liquid state nuclear magnetic resonance spectroscopy (NMR) is a suitable and powerful method. The necessity for these investigations arises from the lack of knowledge in RNA-ligand interactions, e.g. for the development of new medicinal drugs targeting crucial RNA sequences. In the first chapters of this thesis (Chapters II to IV), an introduction into RNA research is given with a focus on RNA structural features (Chapter II), into the interacting molecules, the biology of the specific RNA targets and the further development of their ligands (Chapter III) and into the NMR theory and methodologies used within this thesis (Chapter IV). Chapter II begins with a description of RNA characteristics and functions, placing the focus on the increasing attention that these biomacromolecules have attracted in recent years due to their diverse biological functionalities. This is followed by a detailed description of general structural features of RNA molecules. The biological functions of the RNAs investigated in this thesis (Human immunodeficiency virus PSI- and TAR-RNA and Coxsackievirus B3 Stemloop D in the 5’-cloverleaf element), together with their known structural characteristics are introduced in Chapter III. Furthermore, a description of the investigated ligands is given, focusing on the methods how their affinity and specificity were determined. The introduction is completed in Chapter IV, where the relevant NMR theory and methodologies are explained. First, kinetics and thermodynamics of ligand binding are summarized from an NMR point of view. Subsequently, a detailed description of the resonance assignment procedures for RNAs and peptidic ligands is given. This procedure mainly concentrates on the assignment of the proton resonances, which are essential for the later structure calculation from NMR restraints. The procedure for NMR structure calculation of RNA and its complexes follows with a short introduction into the programs ARIA and HADDOCK. The final part of this chapter explains the relaxation theory and the methodology to extract dynamic information from autocorrelated relaxation rates via the model-free formalism. In the Chapters V to VII of this thesis, the original publications are included and grouped into three topics. Chapter V comprehends the publications on the investigations of HIV PSI-RNA and its hexapeptidic ligand. These three publications[1-3] focus on the characterization of the ligand and its binding properties, its structure and the optimization of its composition aiming to improve its usage for further spectroscopic investigations.
The aim of the study was to investigate the role of the CX3C chemokine FKN in the role of platelet adhesion. The presence of the FKN receptor CX3CR1 in platelets is demonstrated and G-protein dependent activation of platelets with soluble FKN results in the increased adhesion of platelets to collagen and fibrinogen under flow 228 and adhesion of leucocytes to firmly attached platelets 231. Whether membrane-bound FKN is capable to promote the direct adhesion of platelets in flowing blood analogue to leucocytes was completely unknown. The adhesion mechanisms of FKN in mediating the adhesion of leucocytes under flow are well characterised and represent a novel unique mechanism of leucocyte capture and firm adhesion: FKN is responsible for immediate arrest of flowing CX3CR1 expressing leucocytes without the participation of additional adhesion receptors and ligands. This is in contrast to the classical leucocyte adhesion pathways, which are multistep processes involving leucocyte arrest, rolling and subsequent cell activation prior to firm arrest. In leucocytes, the FKN – CX3CR1 axis is sufficient to allow rapid arrest of leucocytes at low shear flow conditions 67, 101, 115, 122, 261. The set of data from this study demonstrates that immobilised FKN was capable to mediate the adhesion of platelets under low shear conditions, whereas there was no interaction in the absence of shear flow. In the presence of vWf in the adhesion matrix, FKN mediated the potent increased adhesion of platelets. This was in parts due to the activation of flowing platelets via CX3CR1 and the augmented translocation of platelets on FKN via the vWf receptor GPIbα. With respect to platelet activation, the function of endothelial FKN was comparable to leucocytes: in both cell types, the FKN dependent activation is mediated by its cognate receptor CX3CR1. This is in contrast to the adhesive capacity: in leucocytes, FKN dependent adhesion is mediated by CX3CR1, whereas in platelets, the adhesive capacity was mostly mediated by the vWf receptor GPIbα with only minor contribution from CX3CR1. In platelets, activation and adhesion by FKN were mediated by two distinct receptors, whereas in leucocytes, CX3CR1 is solely responsible for FKN dependent activation and adhesion. The presented results point out to a role of platelets in early stage of atherosclerosis. The in vivo expression of both, FKN and vWf is regulated by TNF-α, which is released in early stages of inflammation. The presence of vWf and FKN in the endothelial lining of blood vessels during these conditions is sufficient to initiate the capturing and translocation of platelets on the tunica interna. The rolling of platelets on the endothelium can induce endothelial damage and inflammation of the vessel, which might advance to the generation of clinically significant atherosclerotic plaques and fibrous atheroma.
P2X receptors represent the third superfamily of ligand gated ion channels with ATP as their natural ligand. Most of the mammalian P2X receptors are non-selective cation channels, which upon activation, mediate membrane depolarization and have physiological roles ranging from fast excitatory synaptic transmission, modulation of pain-sensation, LTP to apoptosis etc. In spite of them being an attractive drug target, their potential as a drug target is limited by the lack of basic understanding of the structure-function relationship of these receptors. In my thesis, I have investigated the behavior of homomeric P2X receptor subunits with the help of photolabeling and fluorescence techniques coupled to electrophysiological measurements using Xenopus laevis oocytes heterologous expression system. Concurrent photolabeling by BzATP and current recordings from the same set of receptors in real time has revealed that the gating process in homomeric P2X receptors is contributed individually by each subunit in an additive manner. Our study for the first time describes the agonist potency of Alexa-ATP (a fluorescent ATP analog) on P2X1 receptors. The use of Alexa-ATP in our experiments elucidated that receptor subunits are not independent but interacting with each other in a cooperative manner. The type of cooperativity, however, depended on the type and concentrations of allosteric/competing ligands. Based on our results, in my thesis we propose an allosteric model for ligand-receptor interactions in P2X receptors. When simulated, the model could replicate our experimental findings thus, further validating our model. Further, correlation between occupancy of P2X1 receptors (determined using binding curve for Alexa-ATP) with the steady-state desensitization suggests that binding of three agonist molecules per receptor are required to desensitize P2X1 receptors. We further extended the approach of fluorescence with electrophysiological measurement to assign the role for different domains in P2X1 receptors with the help of environmental sensitive, cysteine reactive fluorophore (TMRM). Cysteine rich domain-1 of P2X1 receptors (C117-C165) was found to be involved in structural rearrangements after agonist and antagonist binding. In contrast to the present understanding, that the binding of an antagonist cannot induce desensitization in P2X1 receptors and the receptors need to open first before undergoing desensitization, we propose based on our results that a competitive antagonist can also induce desensitization in P2X1 receptors by bypassing the open state. We have attempted to answer few intriguing questions in the field of P2X receptor research and we think that our answers provide many avenues to the basic understanding of functioning of P2X receptors.
Na+/H+ antiporters are ubiquitous membrane proteins involved in ion homeostasis and pH sensing. The amino acid sequence of one such antiporter, MjNhaP1, from Methanococcus jannaschii, shows a significant homology to eukaryotic sodium proton exchangers like NHE1 from Homo sapiens and SOS1 of Arabidopsis thaliana than to the well-characterized Escherichia coli NhaA or NhaB. MjNhaP1 shows activity at acidic pH unlike NhaA, which is active at basic pH. 13 transmembrane helices have been predicted to be present in NhaP1. A projection map, calculated by Cryo-EM of 2D crystals of MjNhaP1 grown at pH 4, showed it to be a dimer containing elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core (Vinothkumar et al., 2005). Incubation of 2D crystals at pH 8 on the EM grid resulted in well-defined conformational changes, clearly evident in a difference map as a major change in density distribution within the helix bundle (Vinothkumar et al., 2005). The aim of this dissertation is to understand the working mechanism of MjNhaP1 by determining its three-dimensional structure. The aim was initially approached by structure determination by X-ray crystallography. The limitation for this method was the low expression yield, which was 0.5–0.7mg/ml (Vinothkumar et al., 2005). After various optimization trials, the expression yield of the recombinant protein could be elevated to 2-2.5mg of pure protein per litre of culture by the method of autoinduction (Studier et al., 2005). To obtain well diffracting 3D crystals, purification conditions (Vinothkumar et al., 2005) were modified. 3D crystals were obtained under various conditions, which has so far not diffracted X-Ray beyond 8Å. Parallely, optimization of parameters (Vinothkumar et al., 2005) for 2D crystals formation was carried out. A combination of 1% DDM used for lipid solubilization, and 1% OG in the buffer of the purified protein produced 1-2 μm wide tubular 2D crystals of NhaP1. This batch of crystal proved to be the optimal for data collection at higher tilt angle with the electron microscope. A 3D map showed p22121 symmetry and revealed a tight dimer with an oval shape. The region in the central part of the dimer is composed of several tilted helices forming an interface between both monomers. On either side of the dimer interface, a group of six tightly packed helices form a bundle. This bundle contains three straight helices in the centre of the monomer and three helices in the periphery. Comparison of the structures of E.coli NhaA and M. jannaschii NhaP1 show substantial differences in length and slope of corresponding helices between both antiporters. A 3D model of NhaP1 based on the 3D map revealed 13 helices, which has been named as A-M to distinguish it from the NhaA helices. Overlaying the X-ray structure onto the 3D map revealed that the disrupted helices IV and XI of NhaA superimpose two central helices at similar position in the 3D map of NhaP1. The disrupted helices IV and XI in the X-ray structure of NhaA have been proposed as the putative ion-binding and translocation site (Hunte C et al, 2005; Arkin IT et al, 2007; Screpanti & Hunte (2007). This motif appears to be present also in NhaP1, as suggested by the close fit of NhaA helices IV and XI on the putative helices E and L of the NhaP1 model. These two putative helices E and L in NhaP1 contain the highly conserved TDP and GPRVVP motif, which are crucial for antiporter activity (Hellmer et al., 2002, Hellmer et al., 2003). In the overlay, helix V of NhaA containing the two essential, conserved aspartates D163 and D164 fits the density of the putative helix F of NhaP1, which contains the conserved motif FNDP. The homologous D161 in the FNDP motif of NhaP1 is essential for transport activity as show by mutagenesis (Hellmer at al., 2003). Significant differences are visible in the region of the dimer interface of the 3D map of NhaP1 occupied by helices VI, VII, and VIII in NhaA. This region shows an extra helical density (A) in the 3D map of NhaP1. By alignment of MjNhaP1 sequence with the amino acid sequences of several Na+/H+ exchangers, it was evident that the additional helix (A) is located in the N terminus of NhaP1. In our sequence alignment, a putative hydrophobic segment corresponding to this additional helix A is present in other archaeal and eukaryotic antiporters but not in any of the bacterial ones. The N-terminus of the human Na+/H+ exchanger NHE1 has been predicted to contain a highly hydrophobic signal peptide. This indicates the probability of the N-terminal helix A of NhaP1 to be an uncleaved signal peptide. Besides being a signal sequence targeting NhaP1 to the membrane, the map suggests that this helix might be involved in the formation of dimer contacts between both monomers. A gene duplication event is evident in the 3D map of NhaP1, as not only the helices D, E, F and K, L, M are related by an inverted repeat but also the helices B, C and I, J are related. We present here the three-dimensional architecture of a Na+/H+ antiporter from archaea. The presence of the 13th helix suggests the location of the N-terminus to be located in the cytosol and the C-terminus in the periplasm. This would orient NhaP1 in an inverted manner in the membrane in comparison to NhaA. Further structural information at higher resolution and biochemical and biophysical investigations are required to confirm the topology.
The transcription factor p63 is part of the p53 protein family, which consists of three members, p53, p63 and p73. P63 shares structural similarity with all family members, but is associated to different biological functions than p53 or p73. While p53 is mainly linked to tumor suppression and p73 is connected with neuronal development, p63 has been connected to critical biological roles within ectodermal development and skin stem cell biology as well as supervision of the genetic stability of oocytes. Due to its gene structure p63 is expressed as at least six different isoforms, three of them containing a N-terminal transactivation domain. The isoforms that are of biological relevance both have a C-terminal inhibitory domain that negatively regulates the transcriptional activity. This inhibitory domain is supposed to contain two individual components of which one is internally binding and masking the transactivation domain while the other one can be sumoylated. To further investigate this domain a mutational analysis with the help of transactivation assays in SAOS2 cells was carried out to identify the critical amino acids within the inhibitory domain and the impact on transcriptional activity of TAp63alpha, the p63-isoform which is essential for the integrity of the female germline. The results of these experiments show that a stretch of approximately 13 amino acids seems to be important for the regulation of transcriptional activity in TAp63alpha, due to the increased transcriptional activity occurring in this region after mutation. Additional experiments showed that this mechanism is distinct from sumoylation, which seems to have only implications for the intracellular level of TAp63alpha. As a conclusion, the C-terminus of the Tap63alpha is essential for two different mechanisms, which control the transcriptional activity of the protein. Both regulatory elements are independent from each other and can now be restricted to certain amino acids. Activation of the wild type protein might take place in the identified region via post-translational modification. Furthermore an inhibition assay was carried out to test if the same region might have implications on the second biological relevant isoform deltaNp63alpha. The results show that the same amino acids which show an impact on transcriptional activity in Tap63alpha lead to a significant change in functional behaviour of deltaNp63alpha. There is a possibility that both proteins are regulated with opposite effects via the same mechanisms, based at the C-terminus of the p63alpha-isoforms. In both cases a modification of these residues could lead to a more opened conformation of the protein with consequences on promoter binding, which can be even important for deltaNp63alpha with respect to promoter squelching. Both alpha-isoforms seem to be regulated via the C-terminus and to elucidate if that is also the case for TAp63gamma a deletion analysis was carried out. The results show that there are also amino acids within the C-terminus of TAp63gamma, which have implications on the transcriptional activity of the protein. Therefore the C-terminus seems to play a major role for regulation of diverse p63 isoforms.
Based on the commonly used and well-established state-of-the-art DNA sequencing method, i. e. Sanger sequencing, the major target of future research is to develop a fast, cost-effective and gelelectrophoresis-free sequencing method. The aim of the new sequencing technologies is to detect DNA mutations faster and more accurate in order to develop individual therapies for patients (personalized medicine). For this purpose, a lot of novel sequencing techniques like pyrosequencing, mass-spectrometry-assisted sequencing, sequencing by hybridization etc. have been put into practice and already led to commercialized sequencers. The sequencing technology we were mostly interested in is the so-called sequencing-by-synthesis method (SBS). This PhD thesis covers the synthesis of modified nucleosides – the so-called reversible terminators – and their evaluation as reversible terminators. These 3′-modified and dye-labeled nucleotides are incorporated by the polymerase into the DNA-template, then the DNA-synthesis is stopped. After detection of the fluorescent signal, the reversible terminator has to be cleavable in a way (i. e. the polymerase-blocking modification) that the DNA-synthesis can continue. As a result of the polymerase-acceptance tests that have been carried out with the two triphosphates cyanoethoxymethyl(CEM)-dTTP and cyanoethyl(CE)-dTTP as substrates it became clear that the latter one was better incorporated than the first one. Based on this knowledge all four key compounds for the whole reversible terminators possessing the cyanoethyl (CE) group where synthesized within this PhD thesis. Additionally to the synthesis of the modified key compounds, the cleavability of the cyanoethyl function had to be evaluated which is an essential requirement of a reversible terminator for SBS. For addressing this issue, three different CE- and CEM modified monophosphates were created. For each of these three monophosphates an individual synthetic strategy has been developed within this PhD work, each of these strategies and subsequent phosphorylation led to the desired modification. These previously unknown model compounds mimicking the solubility of short oligonucleotides were employed the for qualitative cleavage experiments after their purification and spectroscopical characterization. With these three monophosphates suitable cleavage conditions for a quantitative removal of the CE and the CEM group were examined. In case of the CE function we selectively improved the cleavage conditions while varying the solvent, the reaction temperature as well as the amount of cleaving agent used, in order to make the conditions applicable for an SBS experiment. Due to the fact that the CE function was the most important modification for our SBS experiment, we could even optimize the cleavage efficiency by employing co-solvents like DMSO or DMF. An additional cleavage experiment was carried out by using a short CE-modified oligomer which led to further results that were comparable to the ones obtained from the cleavage experiments of the monomers. One big difference is the required amount of TBAF as cleaving agent for the quantitative removal of the CE-modification from the oligomer. In this case, 7500 equivalents of TBAF are needed for complete CE cleavage at 45 °C compared to the amount of 40 to 80 equivalents TBAF for the monomer (monophosphate). As a conclusion of this result we assume that the amount of cleaving agent and the solubility of the oligomer plays an important role in the CE cleavage efficiency. This assumption was already supported by Saneyoshi et al. who demonstrated for CE-modified RNA oligonucleotides that the CE-cleavage rate is strongly lowered with the increasing of the oligomer length. Thus we could demonstrate that the CE function is quantitatively removable from an oligomer without destroying it. With these results in hands we could prove that the CEM and the CE group are quantitatively cleavable and therefore applicable as blocking groups for reversible terminators. The conditions for the CE cleavage are used for the ArraySBS-“proof-of-principle” which is currently under investigation.
X-ray structure of the Na+-coupled Glycine-Betaine symporter BetP from Corynebacterium glutamicum
(2009)
Cellular membranes are important sites of interaction between cells and their environment. Among the multitude of macromolecular complexes embedded in these membranes, transporters play a particularly important role. These integral membrane proteins perform a number of vital functions that enable cell adaptation to changing environmental conditions. Osmotic stress is a major external stimulus for cells. Bacteria are frequently exposed to either hyperosmotic or hypoosmotic stress. Typical conditions for soil bacteria, such as Corynebacterium glutamicum, vary between dryness and sudden rainfall. Physical stimuli caused by osmotic stress have to be sensed and used to activate appropriate response mechanisms. Hypoosmotic stress causes immediate and uncontrolled influx of water. Cells counteract by instantly opening mechanosensitive channels, which act as emergency valves leading to fast efflux of small solutes out of the cell, therebydiminishing the osmotic gradient across the cell membrane. Hyperosmotic stress, on the other hand, results in water efflux. This is counterbalanced by an accumulation of small, osmotically active solutes in the cytoplasm, the so-called compatible solutes. They comprise a large variety of substances, including amino acids (proline), amino acid derivatives (betaine, ectoine), oligosaccharides (trehalose), and heterosides (glucosylglycerol). Osmoregulated transporters sense intracellular osmotic pressure and respond to hyperosmotic stress by facilitating the inward translocation of compatible solutes across the cell membrane, to restore normal hydration levels. This work presents the first X-ray structure of a member of the Betaine-Choline-Carnitine-Transporter (BCCT) family, BetP. This Na+-coupled symporter from Corynebacterium glutamicum is a highly effective osmoregulated and specific uptake system for glycine-betaine. X-ray structure determination was achieved using single wavelength anomalous dispersion (SAD) of selenium atoms. Selenium was incorporated into the protein during its expression in methione auxotrophic E. coli cells, grown in media supplemented with selenomethionine. SAD data with anomalous signal up to 5 Å led to the detection of 39 selenium sites, which were used to calculate the initial electron density map of the protein. Medium resolution and high data anisotropy made the structure determination of BetP a challenging task. A specific strategy for data anisotropy correction and a combination of various crystallographic programs were necessary to obtain an interpretable electron density map suitable for model building. The crystal structure of BetP shows a trimer with glycine-betaine bound in a three-fold cation-pi interaction built by conserved tryptophan residues. The bound substrate is occluded from both sides of the membrane and aromatic side chains line its transport pathway. Very interestingly, the structure reveals that the alpha-helical C-terminal domain, for which a chemo- and osmosensory function was elucidated by biochemical methods, interacts with cytoplasmic loops of an adjacent monomer. These unexpected monomer-monomer interactions are thought to be crucial for the activation mechanism of BetP, and a new atomic model combing biochemical results with the crystal structure is proposed. BetP is shown to have the same overall fold as three unrelated Na+-coupled symporters. While these were crystallised in either the outward- or inward-facing conformation, BetP reveals a unique intermediate state, opening new perspectives on the alternating access mechanism of transport.
Structural analysis of the enzyme N-formylmethanofuran:tetrahydromethanopterin formyltransferase
(2008)
Archaea represent a third domain of life and some archaea exhibit a high degree of tolerance to extreme environmental conditions. Several members are methanogens and present in many anaerobic environments. Most methanogens are able to maintain growth simply on H2 and CO2 via the enzymatically catalyzed reaction 4H2 + CO2 > CH4 + 2 H2O. The archaeon Methanopyrus kandleri grows optimally at temperatures of 84°C to 110°C, pH values of 5.5 to 7.0 and NaCl concentrations 0.2% to 4%. The enzyme N-formylmethanofuran tetrahydromethanopterin formyltransferase (MkFTR) catalyzes the transfer of a formyl group from the cofactor N-formylmethanofuran (FMF) to the cofactor tetrahydromethanopterin (H4MPT), the second step of the above reaction. X-ray crystallographic analysis yielded insights into the structure and function of MkFTR, (1) the MkFTR monomer exhibits a pseudo-two fold structure suggestive of an evolutionary gene duplication. (2) The structure is a D2 homo-tetramer with prominent cleft-like surface features. Analysis of the interface contacts showed that the tetramer is best described as a dimer of dimers. The clefts were associated with the monomer:monomer interface and were weakly occupied by extra electron density which might be attributed to the H4MPT analog folate. (3) This suggested that the clefts are active sites and their association with oligomer interfaces suggested a basis for the dependence of activity on oligomerization. (4) The thermal stability of MkFTR most likely arises from the greater number of H- and ionic-bonds within the monomer and between monomers with respect to mesophilic protein structures. (5) The structure showed a large number of surface exposed negatively charged, glutamate and aspartate residues. These residues explain the salt dependent oligomerization, as only at high enough salt concentration is the electrostatic charge compensated by cation binding and neutralized allowing oligomerization. (6) These residues also improve the solubility of MkFTR at high salt concentration by increased charge repulsion. (7) Comparison of MkFTR structures from low and hight salt conditions showed that surface glutamate residues bind slightly more water molecules at high salt conditions further contributing to MkFTR solubility at high salt concentration.
Despite the well-known importance of ribonucleic acids (RNA) in cell biology, it is astounding to realize the pace at which new fundamental functions of RNAs have been discovered. One of the fundamental reasons for the multitude of functions of RNA is the property of RNA to adopt different conformations or folds. The primary sequence of RNA, a linear polymer built from four different repetition units, can fold into alternate secondary structure motifs which in turn form alternate long-range interactions in complex tertiary structures. Ligands such as metal ions or small molecular weight metabolites and also proteins or peptides can bind to RNA and induce the changes in tertiary conformation. For example, in the cell, RNA participates in gene regulation in the form of riboswitches. Riboswitches are found in untranslated regions of messenger RNA (mRNA) and adopt alternate conformations depending on the presence or absence of specific metabolites. If a metabolite is present above a specific concentration, it induces a conformational change in the respective riboswitch by binding and thereby alters gene expression. Another example is the RNA thermometer which participates in the cell translational mechanism by a similar strategy. Translation initiation requires the binding of RNA thermometers to the ribosome. The ribosome binding region is located in the 5’ untranslated region of mRNA. At low temperatures this region is prevented from binding to the ribosome by forming basepairs. At higher temperatures, these basepairs dissociate allowing ribosome binding and subsequent translation. Therefore, the characterization and delineation of the kinetics and pathway of RNA folding is important to understand the function of RNA and is an important contribution to fundamentally understand RNA’s role in the cell. RNA conformational transitions occur over a wide range of timescales. Depending on the timescale, various biophysical techniques are used to study RNA conformational transitions. In these biophysical studies, achieving good structural and temporal resolution constitute frequently encountered challenges or limitations. For example, single molecule FRET spectroscopy provides high temporal resolution in the milliseconds at high sensitivity but lacks atomic resolution. Recent advances in the field of Nuclear Magnetic Resonance (NMR) spectroscopy have enabled the elucidation of tertiary folding events to be characterized with atomic resolution. This thesis involves the use of NMR spectroscopy to characterize the folding of RNA molecules. Kinetics experiments require rapid initiation of the kinetics followed by monitoring of the reaction. In this thesis, two different folding initiation techniques have been applied and coupled to the subsequent detection of RNA folding using NMR spectroscopy, namely, photocaging and rapid mixing. The method of photocaging is well established (Kuhn and Schwalbe, 2000) and builds on the following principle: A photolabile moiety is attached to a molecule that prevents a specific interaction. Upon irradiation of the molecule with the photolabile group using laser light at a specific wave length, at which the molecule of interest is not absorbing, the protecting group is released. In our group, together with the group of S. Pitsch, ETH Lausanne, we could "cage" RNA at its equilibrium state by a photolabile molecule (similar work has been carried out in the group of A. Heckel). Rapid and traceless release of the photolabile precursor compound by a laser pulse releases the RNA to fold into its native state; the build-up of the native state of the RNA is monitored by NMR signals that are uniquely characteristic for the native state of the RNA. By optically coupling a laser source to an NMR magnet, the above procedure can take place in situ and the kinetics recorded by NMR. Several different molecules can be caged: The photocage can be attached to RNA. Then, a modified photolabile nucleotide can be placed at strategic positions of a target RNA whose folding properties is to be studied. The photocage can also be attached to a ligand: if folding is dependent on ligand binding then the ligand can be modified to carry a photosensitive unit whose degradation allows binding to RNA. In this thesis, an alternative method for photocaging is introduced. Here, metal ions essential for folding of the RNA are photocaged using the photolabile chelating agent Dimethyl-nitrophen (DMN). Photolysis of DMNr releases the metal ion, thereby RNA folding is initiated. In the rapid-mixing technique, one of (several) components required for proper folding of the RNA is rapidly injected into an NMR sample in situ by the use of a pneumatic injection device. ...
Seit gezeigt wurde, dass die genetischen Informationen in Form von DNA gespeichert wird, ist das Geheimnis der DNA-Struktur gelöst, der Mechanismus der Gen-Expression und die Rolle der RNA verstanden worden. Das Interesse für die Chemie und die Biologie der Nukleinsäuren ist somit kontinuierlich gewachsen. Besonders interessant ist die RNA, die eine Rolle als ein Vermittler der genetischen Informationen (mRNA) spielt, aber auch als Bote von Aminosäuren (tRNA). Sie ist im Ribosom (rRNA) anwesend, arbeitet als Templat in Telomerasen für DNA-Synthese und hat außerdem wichtige Funktionen in der RNA-Spaltung, z.B. bei Ribozymen wie RNAse P inne. Betreffend bestimmter Spaltstellen in RNA hat auch das Phänomen der siRNA beträchtliche Aufmerksamkeit in diesem Prozess erregt. Der sogenannte RISC-Komplex wird programmiert, einzelsträngige RNA mit hoher Sequenz-Spezifität zu schneiden. Die für die RNA-Interferenz verantwortliche zelluläre Maschinerie ist auch an der Bilbung von MikroRNAs beteiligt. RNA-Interferenz ist heute eines der nützlichsten Werkzeuge in functional genomics geworden. Die große Hoffnung ist, dass es auch vielleicht in der Therapie angewandt werden könnte. Das Thema meiner Doktorarbeit trägt den Titel „Synthesis of Site-Specific Artificial Ribonucleases“. Es beschäftigt sich mit der Entwicklung künstlicher bindungsspezifischer Ribonucleasen. Diese künstlichen Katalysatoren sind im Wesentlichen aus drei Gründen bedeutsam: Zum einen liegt eine mögliche Anwendung in der Affinity-Cleavage (Affinitätsspaltung), eine Technik, die Bindungsstellen von RNA-Liganden durch das kovalente Anbringen eines Reagenzes lokalisiert, das zwischen den Nukleinsäuren schneidet. Zum anderen entsteht die Möglichkeit, neue Werkzeuge für eine gezielte Manipulation großer RNA-Moleküle zu schaffen. Die Vorteile des Ansatzes sind, dass man damit beliebige Zielsequenzen anwählen kann. Das Problem dieser Strategie ist die Notwendigkeit, hohe Genauigkeit im Spaltungssschritt zu erreichen, wie zum Beispiel mit natürlichen Ribozymen. Wichtige Ergebnisse wurden auch während meiner Arbeit erhalten, mit einem Fall von genauer Spaltung zwischen zwei Basen. Der dritte Grund ist die potentielle Anwendung als katalytische antisense-Oligonucleotide in der Chemotherapie. Gegenwärtig existieren zwei Ansätze, unspezifische künstliche RNasen relativ kleiner Größe zu schaffen. Der erste basiert auf Metallkomplexen und führt im Allgemeinen zu höheren Raten. Die Idee ist, ein Metall als elektrophiles Zentrum zur Unterstützung der Transesterfikation zu nutzen. Unter diesen Katalysatoren enthalten die effizientesten Lanthanid-Ionen, Cu2+ und Zn2+. Der zweite Ansatz zielt darauf ab, metallfreie künstliche Ribonucleasen zu entwickeln. Die Vorteile dieser Strategie sind, den Katalysator von der Stabilität der Metallkomplexe, die in vivo problematisch sein könnten, unabhängig zu machen. In diesem Ansatz wird die natürliche Katalyse durch Enzyme simuliert. Zweckmäßige Gruppen mit beschränkter katalytischer Aktivität z.B. als Nucleophile, Säuren oder Basen, werden in einer Weise zusammengesetzt, um Kooperation zu ermöglichen. Potente Katalysatoren können so ohne die Notwendigkeit von Metallen als Cofaktoren erzeugt werden. ...
The Na+,K+-ATPase was discovered more than 50 years ago, but even today the pumpcycle and its partial reactions are still not completely understood. In this thesis, Voltage Clamp Fluorometry was used to monitor the conformational changes that are associated with several electrogenic partial reactions of the Na+,K+-ATPase. The conformational dynamics of the ion pump were analyzed at different concentrations of internal Na+ or of external K+ and the influences on the conformational equilibrium were determined. To probe the effect of the internal Na+ concentration on the Na+ branch of the ion pump, oocytes were first depleted of internal Na+ and then loaded with Na+ using the epithelial sodium channel which can be blocked by amiloride. The conformational dynamics of the K+ branch were studied using different external K+ concentrations in the presence and in the absence of external Na+ to yield additional information on the apparent affinity of K+. The results of our Voltage Clamp Fluorometry experiments demonstrate that lowering the intracellular concentration of Na+ has a comparable effect on the conformational equilibrium as increasing the amount of K+ in the external solution. Both of these changes shift the equilibrium towards the E1/E1(P) conformation. Furthermore, it can be shown that the ratio between external Na+ and K+ ions is also a determinant for the position of the conformational equilibrium: in the absence of external Na+, the K+ dependent shift of the equilibrium towards E1 was observed at a much lower K+ concentration than in the presence of Na+. In addition, indications were found that both external K+ and internal Na+ bind within an ion well. Finally, the crucial role of negatively charged glutamate residues in the 2nd extracellular loop for the control of ion-access to the binding sites could be verified.
RNA interference (RNAi) is triggered by recognition of double-stranded RNA (dsRNA), and elicits the silencing of gene(s) complementary to the dsRNA sequence. RNAi is thought to have emerged as a way of safeguarding the genome against mobile genetic elements and viral infection, thus maintaining genomic integrity. dsRNA is first processed into small interfering RNAs (siRNA) by the enzyme Dicer. siRNAs are ~21 to 25 -nt long, and contain a signature 5’ phosphate group and a two nucleotide long 3’ overhang (Bernstein et al., 2001). The siRNA is then loaded into the RNA-induced si-lencing complex (RISC), of which Argonaute is the primary catalytic component (Liu et al., 2004). Energetic asymmetry of the siRNA ends allows for its directional loading into RISC (Khvorova et al., 2003; Schwarz et al., 2003). Argonaute cleaves the passen-ger strand of the siRNA, leaving the guide strand of the siRNA bound to RISC (Gregory et al., 2005; Matranga et al., 2005; Rand et al., 2005). This single-stranded guide strand siRNA bound to Argonaute is able to recognize target mRNA in a sequence-specific manner, and cleaves the mRNA. Argonaute 2 in complex with single-stranded siRNA is sufficient for mRNA recognition and cleavage, thus forming a minimal RISC (Rivas et al., 2005). miRNAs, endogenously expressed small RNA genes which typically contain mismatches and non-Watson-Crick base pairing, are processed by this general pathway, although typically modulate gene expression by translational repression as opposed to cleavage of their target mRNA. The number of Argonaute genes is highly variable between species, ranging from one in S. pombe to twenty-seven in C. elegans. Earlier crystal structures of Argonaute apoen-zymes show the architecture of Argonaute to be a multidomain protein composed of N terminal, PAZ, MID, and PIWI domains (Song et al., 2004; Yuan et al., 2005). These multi-domain proteins are present in both prokaryotic and eukaryotic organisms. The role of Argonaute proteins in prokaryotes is still unknown, but based similarity to eu-karyotic Argonautes, they may also be involved in nucleic acid-directed regulatory pathways. These proteins have served as excellent models for learning about the struc-ture and function of this family of proteins. RNAi has found a widespread application for the simple yet effective knockdown of genes of interest. The catalytic cycle of RISC requires the binding of a number of different nucleotide structures to Argonaute, and we expect Argonaute to undergo a number of conforma-tional changes during the cycle of mRNA recognition by RISC (Filipowicz, 2005; Tom-ari and Zamore, 2005). Nevertheless, it remains unclear how the multi-domain ar-rangement of Argonaute recognizes and distinguishes between single-stranded and dou-ble-stranded oligonucleotides, which correspond to the Dicer-processed siRNA product, guide strand siRNA, and the guide strand / mRNA duplex. The Argonaute protein from Aquifex aeolicus was cloned, expressed, crystallized and solved by molecular replacement. Relative to earlier Argonaute structures, a 24° reorientation of the PAZ domain in this structure opens a basic cleft between the N-terminal and PAZ domains, exposing the guide strand binding pocket of PAZ. A 5.5-ns molecular dynamics simulation of Argonaute showed a strong tendency of the PAZ and N-terminal domains to be mobile. Binding of single-stranded DNA to Argonaute was monitored by total internal reflection fluorescence spectroscopy (TIRFS). The experi-ments showed biphasic kinetics indicative of large conformational changes, and re-vealed a hotspot of binding energy corresponding to the first 9 nucleotides, the so-called “seed region” most crucial for sequence-specific target recognition. As RNAi may have evolved as a way of safeguarding the genome viral infection, it is not surprising that viruses have evolved different strategies to suppress the host RNAi response in the form of viral suppressor protein. (Hock and Meister, 2008; Lecellier and Voinnet, 2004; Rashid et al., 2007; Song et al., 2004; Vastenhouw and Plasterk, 2004). These viral suppressors are widespread, having been identified in a number of different viral families. Not surprisingly, they generally share little sequence homology with one another, although they appear to exist as oligomers built upon a ~ 100-200 amino acid protomer. Tomato aspermy virus, a member of the Cucumoviruses, encodes for protein 2B (TAV 2B, 95 a.a., ~11.3 kDa) that acts as an RNAi suppressor. Intriguingly, a similar genomic arrangement is seen in RNAi suppressors in the Nodaviruses, a family of viruses that can infect both plants and animals, such as Flock house virus b2 (FHV b2). The 2B and b2 proteins are both derived from a frameshifted ORF within the RNA polymerase gene (Chao et al., 2005). In spite of this genomic similarity, the 2B and b2 proteins share little sequence identity, and it is not well understood how the Cucumovirus 2B proteins suppress RNAi. To address how TAV 2B suppresses RNAi, the oligonucleotide-binding properties of TAV 2B were studied. TAV 2B shows a preference for double-stranded RNA oligonucleotides corresponding to siRNAs and miRNAs, and also binds to single-stranded RNA oligonucleotides. A stretch of positively charged residues between amino acids 20-30 are critical for RNA binding. Binding to RNA oligomerizes and induces a conformational change in TAV 2B into a primarily helical structure. These studies sug-gest that suppression of RNAi by TAV 2B may occur by targeting different stages of the RNAi pathway. TAV 2B falls under the category of more general RNAi suppres-sors, with potentially multiple targets for suppression.
Zusammenfassung Die Alzheimersche Krankheit (AD) ist mit 60% die am häufigsten auftretende Art der Demenz. Weltweit sind ca. 24 Mio. Menschen von der neurodegenerativen Krankheit betroffen, welche sich durch den Verlust der kognitiven Fähigkeiten auszeichnet. Es gibt zwei Ausprägungen der Demenz, zum einen die sporadische Verlaufsform, die bei Menschen in einem Alter ab 65 Jahren auftritt und zum anderen die familiäre Alzheimersche Krankheit (FAD), die schon weitaus jüngere Menschen betrifft und auf genetische Mutationen zurück zu führen ist. Beide Formen der Demenz zeigen den gleichen neuropathologische Phänotyp, der zur Ausbildung von extrazellulären Plaques und intrazellulären Neurofibrillen führt. Durch die Entstehung der Plaques und der Neurofibrillen werden die Verbindungen zwischen den einzelnen Neuronen verringert und die Neuronen sterben ab. Für das Auftreten der FAD sind Mutationen in den Genen des Amyloid Vorläufer Proteins (APP, Substrat) sowie der Aspartatprotease Einheit des γ-Sekretase Komplexes, Presenilin 1 (PS1) oder Presenilin 2 (PS2), verantwortlich. Die γ-Sekretase ist ein membranständiger Komplex bestehend aus den vier Untereinheiten PS1 oder PS2, Nicastrin (Nct), Aph-1 und Pen-2. Um ausreichende Informationen über den γ-Sekretase Komplex bezüglich seiner Interaktionsflächen, seines Katalysemechanismus und seiner Substraterkennung zu erhalten, wäre es hilfreich seine 3 Dimensionale Struktur aufzuklären, wozu große Mengen der sauberen und homogenen Proteine benötigt werden. Die Herstellung von ausreichenden Proteinmengen stellt derzeit aber einen Engpass für die strukturelle und funktionelle Charakterisierung des γ-Sekretase Komplexes in-vitro dar. Alzheimer’s disease (AD) is the most common cause of dementia, which affects 24 million people worldwide. It is a neurodegenerative disorder, which occurs either in its most common form in people over 65 years or in the rare early-onset familial AD (FAD). Responsible for the autosomal dominant FAD are mutations in the genes encoding for the β-amyloid precursor protein (APP) and the two homologues integral membrane proteins Presenilin 1 (PS1) and Presenilin 2 (PS2). The two PSs are major but alternative components of the intramembrane aspartyl protease γ-secretase. Further components are the membrane proteins Nicastrin (Nct), Aph-1 and Pen-2. Production of sufficient amounts of protein samples is still the major bottleneck for the detailed functional and structural in-vitro characterization of the γ-secretase complex. Due to toxicity, stability and targeting problems, the overproduction of MPs in conventional in-vivo systems often has only limited success. Therefore, efficient expression protocols using the cell-free (CF) system were established in this work. After optimization, I was able to produce up to milligram amounts of the single proteins PS1 and PS2, the cleavage products PS1-NTF and PS1-CTF, and Pen-2. The in-vitro produced γ-secretase subunits were further characterized, concerning their purity, secondary fold, thermal stability and homogeneity. Highest purities with over 90% after affinity chromatography could be achieved for PS1-CTF and Pen-2. Reconstitution of PS1, PS1-NTF, PS1-CTF and Pen-2 into E. coli liposomes results in a homogeneously distribution, which gives evidence for a structural folding. This was confirmed by CD spectroscopy of PS1-CTF and Pen-2. The thermal stability of Pen-2 shows a transition at 68°C, whereas PS1-CTF is stable up to 95°C. Both proteins show in addition homogeneous elution profiles investigated by analytical SEC and exhibit a monomeric (Pen-2) or dimeric (PS1-CTF) character analyzed by blue native PAGE. Different methods were performed to get evidence about the assembly of the complex, like pull-down experiments, immunoprecipitation, co-expression of radioactive labeled subunits and titration assays by liquid-state NMR. First hints for an interaction of the CF synthesized proteins could be observed by co-expression. Supplemental, Pen-2 and CTF could be purified in sufficient amounts and to apparent homogeneity that allow structural approaches by X-ray crystallography and liquid-state NMR spectroscopy. First conditions for protein crystals were achieved for Pen-2 and structural investigations of PS1-CTF by liquid-state NMR could be performed after optimization of the expression-, purification- and detergent conditions.
A generic drug product (World Health Organization (WHO) terminology: multisource product) is usually marketed and manufactured after the expiry date of the innovator’s patent. Generic drugs are less expensive than the innovator products because generic manufacturers do not have to amortize the investment costs of research, development, marketing, and promotion. Multisource products must contain the same active pharmaceutical ingredients (APIs) as the original formulation and have to be shown to be interchangeable with the original formulation. Multisource products have to be shown bioequivalent to the innovator counterpart with respect to pharmacokinetic and pharmacodynamic properties. Multisource products are therefore identical in dose, strength, route of administration, safety, efficacy, and intended use. Bioequivalence can be demonstrated by in vitro dissolution, pharmacokinetic, pharmacodynamic or clinical studies. Since 2000, the U.S. Food and Drug Administration (FDA) allows the approval of certain multisource products solely on the basis of in vitro studies, i.e. by waiving in vivo studies in humans (“Biowaiver”), based on the Biopharmaceutics Classification Scheme (BCS). The BCS characterizes APIs by their solubility and permeability in the gastrointestinal tract (GIT). The different BCS Classes I-IV (Class I: high solubility, high permeability; Class II: low solubility, high permeability; Class III: high solubility, low permeability and Class IV: low solubility, low permeability) result from all possible combinations of high and low solubility with high and low permeability. Since the adoption of the BCS by the FDA in 1995, the BCS criteria have been under continuous development. In 2006, the WHO has released the most recent bioequivalence guidance including relaxed criteria for bioequivalence studies based on modified BCS criteria. According to this guidance, APIs belonging to the BCS classes I – and under defined conditions - II and III – are eligible for a biowaiver-based approval. The principal objective of this work was to characterize the first-line anti tuberculosis APIs, isoniazid, pyrazinamide, ethambutol dihydrochloride and rifampicin, according to their physicochemical, biopharmaceutical, pharmacokinetic and pharmacological properties and to classify them according to the BCS. Ethambutol dihydrochloride and isoniazid were classified as borderline BCS class I/III APIs. Pyrazinamide was classified as a BCS class III and rifampicin as a BCS class II API. Based on the BCS classification and the additional criteria defined in the WHO bioequivalence guidance, the possibility of biowaiver-based approval for immediate release (immediate release) solid oral dosage forms containing the first-line antituberculosis drugs was evaluated. A biowaiver-based approval with defined constraints was recommended for immediate release solid oral dosage forms containing isoniazid (interaction with reducing sugars), pyrazinamide and ethambutol dihydrochloride (relative narrow therapeutic index). Rifampicin was classified as a BCS class II API, and it was concluded that rifampicin containing solid oral immediate release drug products as well as Scale-Up and Post-Approval Changes (SUPAC) changes should not be approved by a biowaiver on the following basis: (i) its solubility and dissolution are highly variable due to polymorphism and instability, (ii) concomitant intake of food and antacids reduces its absorption and bioavailability, (iii) no in vitro predictive dissolution test has been found which correlates to in vivo absorption and (iv) several publications reporting cases of non-bioequivalent and bioinequivalent rifampicin products have been located in the literature. Thus, it is recommended that bioequivalence of rifampicin containing solid oral immediate release drug products should be established by in vivo pharmacokinetic studies in humans. This risk-benefit benefit assessment of a biowaiver-based approval was presented as a poster at the American Association of Pharmaceutical Scientists (AAPS) 2005 and subsequently published as “Biowaiver Monographs” in the Journal of Pharmaceutical Sciences. Based on the assessment of the dissolution properties of the antituberculosis drugs for a biowaiver approval, quality control dissolution methodologies for the International Pharmacopoeia (Pharm. Int.) were developed, presented at the WHO expert meeting and adopted in the Pharm. Int. (http://www.who.int/medicines/publications/pharmprep/OMS_TRS_948.pdf). Additionally, preliminary biowaiver recommendations were also developed for four firstline antimalarial drugs listed on the WHO Essential Medicines List (EML): Quinine, as both the hydrochloride and sulphate, and proguanil hydrochloride were classified as borderline BCS class I/III APIs. Since quinine is a narrow therapeutic index drug and many cases of non-bioequivalence have been reported in the literature, a biowaiverbased approval was not recommended. For solid oral immediate release dosage forms containing proguanil a biowaiver-based approval was recommended under the condition that they dissolve very rapidly. Primaquine phosphate was classified as a BCS class I API. Therefore, a biowaiver-based approval was recommended for immediate release solid oral dosage forms containing primaquine phosphate. Mefloquine hydrochloride was classified as a basic, BCS class IV/II API, making it ineligible for the biowaiver. Additionally, reports of non-bioequivalence and a narrow therapeutic index were found in the scientific literature. Consequently, bioequivalence of solid oral immediate release dosage forms containing mefloquine hydrochloride should be established by in vivo pharmacokinetic studies. The results for quinine hydrochloride and sulphate, proguanil hydrochloride, primaquine diphosphate and mefloquine hydrochloride were presented as a poster at the Pharmaceutical Sciences World Congress (PSWC) 2007 and published as a WHO Collaborating Center Report in June 2006. The aim of this project was to collect, evaluate, generate and publish relevant information for a biowaiver-based approval of essential medicines in order to provide a summary to local regulatory authorities. This information complements the selected list of essential medicines by providing information about the biopharmaceutical properties and pharmaceutical quality of solid oral immediate release dosage forms containing these APIs. The aim of the biowaiver project, inspired by the WHO and brought in life by the International Pharmaceutical Federation (FIP), is to enable access to essential medicines in standardized quality at an affordable price. In this work, a significant contribution to this aim in the form of four biowaiver monographs for the antituberculosis drugs and several reports on the antimalarials has been achieved.
Photo-initiated processes, like photo-excitation and -deexcitation, internal conversion, excitation energy transfer and electron transfer, are of importance in many areas of physics, chemistry and biology. For the understanding of such processes, detailed knowledge of excitation energies, potential energy surfaces and excited state properties of the involved molecules is an essential prerequisite. To obtain these informations, quantum chemical calculations are required. Several quantum chemical methods exist which allow for the calculation of excited states. Most of these methods are computationally costly what makes them only applicable to small molecules. However, many biological systems where photo-processes are of interest like light-harvesting complexes in photosynthesis or the reception of light in the human eye by rhodopsin are quite large. For large systems, however, only few theoretical methods remain applicable. The currently most widely used method is time-dependent density functional theory (TD-DFT), which can treat systems of up to 200–300 atoms with the excitation energies of some excited states exhibiting errors of less than 0.5 eV. Yet, TD-DFT has several drawbacks. The most severe failure of TD-DFT is the false description of charge transfer states which is particularly problematic in case of larger systems where it yields a multitude of artificially low-lying charge transfer states. But also Rydberg states and states with large double excitation character are not described correctly. Still, if these deficiencies are kept in mind during the interpretation of results, TD-DFT is a useful tool for the calculation of excited states. In my thesis, TD-DFT is applied in investigations of excitation energy and electron transfer processes in light-harvesting complexes. Since light-harvesting complexes, which consist of thousands of atoms, are by far too large to be calculated, model complexes for the processes of interest are constructed from available crystal structures. The model complexes are used to calculate potential energy curves along meaningful reaction coordinates. Artificial charge transfer states are corrected with the help of the so-called ∆DFT method. The resulting potential energy curves are then interpreted by comparison with experimental results. For the light-harvesting complex LH2 from purple bacteria the experimentally observed formation of carotenoid radical cations is studied. It is shown that the carotenoid radical cation is formed most likely via the optically forbidden S1 state of the carotenoid. In light-harvesting complex LHC-II of green plants the fast component of the so-called non-photochemical quenching (NPQ) is investigated. Two of several different hypotheses on the mechanism of NPQ, which have been proposed recently, are studied in detail. The first one suggests that NPQ proceeds via simple replacement of violaxanthin by zeaxanthin in the binding pocket in LHC-II. However, the calculated potential energy curves exhibit no difference between violaxanthin and zeaxanthin in the binding pocket. In combination with experimental results it is thus shown that simple replacement alone does not mediate NPQ in LHC-II. The second hypothesis proposes conformational changes of LHC-II that lead to quenching at the central lutein and chlorophyll molecules during NPQ. My TD-DFT calculations demonstrate that if this mechanism is operative, only the lutein 1 which is one of two central luteins present in LHC-II can take part in the quenching process. This is corroborated by recent experiments. Though several conclusions can be drawn from the investigations using TD-DFT, the interpretability of the results is limited due to the deficiencies of the method and of the models. To overcome the methodological deficiencies, more accurate methods have to be employed. Therefore, the so-called algebraic diagrammatic construction scheme (ADC) is implemented. ADC is a widely overlooked ab initio method for the calculation of excited states, which is based on propagator theory. Its theoretical derivation proceeds via perturbation expansion of the polarization propagator, which describes electronic excitations. This yields separate schemes for every order of perturbation theory. The second order scheme ADC(2), which is employed here, is the equivalent to the Møller-Plesset ground state method MP(2), but for excited states. It represents the computationally cheapest excited state method which can correctly describe doubly excited states, as well as Rydberg and charge transfer states. The quality of ADC(2) results is demonstrated in calculations on linear polyenes which serve as model systems for the larger carotenoid molecules. The calculations show that ADC(2) describes the three lowest excited states of polyenes sufficiently well, particularly the optically forbidden S1 state which is known to possess large double excitation character. Yet, the applicability of the method is limited compared to TD-DFT due to the much larger computational requirements. To facilitate the calculation of larger systems with ADC(2) a new variant of the method is developed and implemented. The variant employs the short-range behavior of electron correlation to reduce the computational effort. As a first step, the working equations of ADC(2) are transformed into a basis of local orbitals. In this basis negligible contributions of the equations which are due to electron correlation can be identified based on the distances of local orbitals. A so-called “bumping” scheme is implemented which removes the negligible parts during a calculation. This way, the computation times as well as the disk space requirements can be reduced. With the “bumping” scheme several new parameters are introduced that regulate the amount of “bumping” and thereby the speed and the accuracy of computations. To determine useful values for the parameters an evaluation is performed using the linear polyene octatetraene as test molecule. From the evaluation an optimal set of parameter values is obtained, so that the computation times become minimal, while the errors in the excitation energies due to the “bumping” do not exceed 0.15 eV. With further calculations on various molecules of different sizes it is tested if these parameter values are universal, i.e. if they can be used for all molecules. The test calculations show that the errors in the excitation energies are below 0.15 eV for all test systems. Additionally, no trend is visible for the errors that their magnitude might depend on the system. In contrast, the amount of disregarded contributions in the calculations increases drastically with growing system size. Thus, the local variant of ADC(2) can be used in future to reliably calculate excited states of systems which are not accessible with conventional ADC(2).
SIVsmmPBj-derived lentiviral vectors are capable of efficient primary human monocyte transduction, a capacity which is linked to the viral accessory protein Vpx. To enable novel gene therapy approaches targeting monocytes, in this thesis it was aimed to generate enhanced lentiviral vectors that meet the required standards for clinical applications with respect to gene transfer efficiency and safety. The vectors were tested for their suitability in a relevant therapeutic gene transfer approach. At first, it was investigated whether vectors derived from another Vpx-carrying lentivirus reveal the same capacity for monocyte transduction as SIVsmmPBj-derived vectors. A transduction experiment using HIV-2-derived vectors in comparison to PBj-derived vectors revealed a comparable transduction capacity, thus disproving the assumed uniqueness of the PBj vectors. The further generation and analysis of expression constructs for the vpx genes of HIV-2 and SIVmac demonstrated a similar functionality in monocyte transduction as the Vpx of PBj. As VpxPBj, both Vpx proteins facilitated monocyte transduction of a vpx-deficient PBj-derived vector system. For the generation of enhanced SIVsmmPBj and HIV-2 vector systems, only the transfer vectors were optimized, since the packaging vectors available already meet current standards. At first, several modifications were introduced into an available preliminary PBj-derived transfer vector by conventional cloning. The modifications included insertions of cPPT/CTS and WPRE as well as the deletions of the remaining pol sequence, the second exons of tat end rev, and the U3-region within the 3’LTR to generate a SIN vector. Thus, beside safety enhancement, the vector titers were also increased from 9.1x105 TU/ml achieved after concentration with the initial transfer vector up to 1.1x107 TU/ml with the final transfer vector. The PBj vector retained its capability of monocyte transduction when supplemented with Vpx. This conventional method of vector enhancement is time-consuming and may result in only sub-optimal vectors, since it depends on the presence of restriction sites which may not allow deletion of all needless sequences. Moreover, mutations may accumulate during the high number of cloning and amplification steps. Therefore, a new and easier method for lentiviral transfer vector generation was conceived. Three essential segments of the viral genome (5‘ LTR, RRE, ΔU3-3’ LTR) are amplified on the template of the lentiviral wild-type genome and fused by Fusion-PCR. Further necessary elements namely the cPPT/CTS-element, MCS, and PPT are included into the resulting vector by extension of the nucleotide primers used for the PCRs. The amplified and fused vector-scaffold can easily be integrated into a plasmid backbone, followed by insertion of the expression cassette of choice. By applying this approach, two novel lentiviral transfer vectors, based on the non-human SIVsmmPBj and the human HIV-2, were derived. Vector titers achieved for PBj and HIV-2 vectors supplemented with Vpx reached up to 4.0x108 TU/ml and 5.4x108 TU/ml, respectively. The capacity for monocyte transduction was maintained. Thus, safe and efficient, state of the art HIV-2- and PBj-derived vector systems are now available for future gene therapy strategies. Finally, the new vectors were used to set up an approach for gene correction of gp91phox-deficient monocytes for the treatment of X-linked chronic granulomatous disease (xCGD). The administration of autologous, gene-corrected monocytes to counteract systemic and acute infections could lead to a decreased infection load, dissolve granulomas and therefore improve the survival rate of hematopoietic stem cell transplantation (HSCT) which is the current treatment of choice for this disease. First, methods for analysis of gp91phox function were established. Next, they were employed to demonstrate the capacity of monocytes, obtained from healthy humans or mice, for phagocytosis, oxidative burst, and Staphylococcus aureus killing. The in vivo half-life of murine monocytes in the bloodstream and their distribution to specific tissues was determined. Lastly, HIV-1 vectors were used to transfer the gp91phox gene into monocytes from gp91phox-deficient mice. This resulted in the successful restoration of the oxidative burst ability in the cells. In summary, the general suitability of the new vectors for treatment of CGD by monocyte transduction was demonstrated. The results of the mouse experiments provide the foundation for future challenge experiments to evaluate the capability of gene-corrected monocytes to kill off microbes in vivo.
5-LO is the key enzyme in the biosynthesis of proinflammatory leukotrienes. It catalyses the conversion of arachidonic acid to the hydroperoxy intermediate 5(S)-hydroperoxy-6- trans-8,11,14-cis-eicosatetraenoic acid (5-HpETE). In a second step 5-LO catalyses a dehydration reaction forming the unstable epoxide intermediate 5(S)-trans-5,6-oxido-7,9- trans-11,14-cis-eicosatetraenoic acid (leukotriene A4 , LTA4). The 5-LO gene is subjected to versatile regulation mechanisms. Apart from regulation by DNA-methylation and histone acetylation / deacetylation 5-LO gene expression can be regulated by the differentiation inducers calcitriol (1,25-dihydroxyvitamin D3) and transforming growth factor beta (TGFβ) 5-LO gene expression. In the myeloid cell lines Mono Mac 6 (MM6) and HL-60, differentiation with both agents caused a prominent upregulation of 5-LO mRNA level, of 5-LO protein expression and of 5-LO activity. Treatment with calcitriol alone already has an impact on 5-LO gene expression which is additionally potentiated by TGFβ treatment. Previous nuclear run-off analysis and reporter gene analysis could not associate the 5-LO promoter with the induction of 5-LO mRNA expression mediated by calcitriol and TGFβ. Inclusion of the 5-LO coding sequence (cds) and inclusion of the 5-LO cds plus the last four introns of the gene (J to M) in the 5-LO promoter construct pN10 led to an enhanced reporter gene activity. The inductions were dependent on vitamin D receptor (VDR) and retinoid x receptor (RXR) cotransfection. Therefore the work was concentrated on identifying elements outside the 5-LO promoter region which contribute to the calcitriol / TGFβ effect on 5-LO mRNA expression. Insertion of the LTA4 hydrolase coding sequence – a coding sequence of similar size - instead of the 5-LO cds led to a loss of the calcitriol / TGFβ effect (pN10LTA4Hcds 1-fold induction). Therewith, it was proven that the presence of the 5-LO cds is crucial for the upregulating effect of calcitriol / TGFβ on 5-LO mRNA level. Cloning of the SV40 promoter instead of pN10 upstream of the 5-LO cds still showed inducibility by treatment with the inducers which argues for a promoter unspecific effect. Insertion of the 5-LO cds in a promoterless basic vector (pGL3cds) displayed same inductions by calcitriol / TGFβ treatment as the 5-LO promoter 5-LO cds construct (pN10cds). Thus, the effect of the inducers is not dependent on the 5-LO promoter under the in vitro conditions of the reporter gene assay. Hence, further cloning was done with promoterless constructs. Through 5-LO cds deletion constructs a positive regulating region in exon 10 to 14 was discovered. To adapt the natural gene context the last four introns (J-M) of the 5-LO gene were inserted in a promoterless construct containing exon 10 to 14 (pGL3cdsΔABInJM). 5end deletion constructs of it revealed putative vitamin D responsive elements (VDREs) in exon 12 and intron M. Mutation of the putative VDREs led to a reduced calcitriol effect –more prominent when the putative VDRE in intron M was mutated (reduction of 40%). Moreover another putative VDRE in exon 10 with an adjacent SMAD binding element (SBE) was detected. SMAD proteins are effector proteins of TGFβ signalling. Gelshift experiments demonstrated in vitro binding of the VDR-RXR heterodimer to those three putative VDREs. By chromatin immunoprecipitation (ChIP) assay in vivo binding of VDR and RXR was shown to the VDRE in the region of exon 10, exon 12 and intron M. 8h and 24h incubation with calcitriol / TGFβ resulted in enhanced expression of VDR in each of the examined regions. The VDR is able to bind to the VDRE without its ligand, whereas this goes along with corepressor recruitment and thus the VDR has a repressive effect on transcription. Histone H4 acetylation was increased when MM6 cells were treated for 8h or 24h with calcitriol or the combination of calcitriol / TGFβ. This finding implies that at that point of time corepressors associated with the VDR are replaced by coactivators. It seems convincing that 5-LO transcription is mainly promoted by calcitriol alone which leads to a more accessible chromatin structure. Previous data indicated that calcitriol and TGFβ upregulate 5-LO RNA maturation and 5- LO transcript elongation. Thus several elongation markers were investigated by ChIP analysis: Histone H3 lysine 36 (H3K36) trimethylation and H4K20 monomethylation were detected in the analysed regions in exon 10, exon 12 and intron M. In region exon 10 the H3K36 trimethylation status was enhanced after 24h calcitriol or calcitriol / TGFβ treatment. An increased H4K20 monomethylation status in all regions was observed when MM6 cells were treated for 24h with calcitriol / TGFβ. 24h treatment with both agents also enhanced the recruitment of the elongation form of RNA polymerase II, which is phosphorylated at serine 2 of the carboxyterminal domain, to the investigated regions. These findings prove the positive regulating role for calcitriol and TGFβ on 5-LO transcript elongation. A putative mechanism of the effect of calcitriol and TGFβ on 5-LO RNA maturation might be the elevated phosphorylation of serine 2 of the RNA Polymerase II which is known to be followed by recruiting polyadenylating factors.
Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.
The light-harvesting complex of photosystem II (LHC-II) is the major antenna complex in plant photosynthesis. It accounts for roughly 30% of the total protein in plant chloroplasts, which makes it arguably the most abundant membrane protein on Earth, and binds about half of plant chlorophyll (Chl). The complex assembles as a trimer in the thylakoid membrane and binds a total of 54 pigment molecules, including 24 Chl a, 18 Chl b, 6 lutein (Lut), 3 neoxanthin (Neo) and 3 violaxanthin (Vio). LHC-II has five key roles in plant photosynthesis. It: (1) harvests sunlight and transmits excitation energy to the reaction centres of photosystems II and I, (2) regulates the amount of excitation energy reaching each of the two photosystems, (3) has a structural role in the architecture of the photosynthetic supercomplexes, (4) contributes to the tight appression of thylakoid membranes in chloroplast grana, and (5) protects the photosynthetic apparatus from photo damage by non photochemical quenching (NPQ). A major fraction of NPQ is accounted for its energy-dependent component qE. Despite being critical for plant survival and having been studied for decades, the exact details of how excess absorbed light energy is dissipated under qE conditions remain enigmatic. Today it is accepted that qE is regulated by the magnitude of the pH gradient (ΔpH) across the thylakoid membrane. It is also well documented that the drop in pH in the thylakoid lumen during high-light conditions activates the enzyme violaxanthin de-epoxidase (VDE), which converts the carotenoid Vio into zeaxanthin (Zea) as part of the xanthophyll cycle. Additionally, studies with Arabidopsis mutants revealed that the photosystem II subunit PsbS is necessary for qE. How these physiological responses switch LHC-II from the active, energy transmitting to the quenched, energy-dissipating state, in which the solar energy is not transmitted to the photosystems but instead dissipated as heat, remains unclear and is the subject of this thesis. From the results obtained during this doctoral work, five main conclusions can be drawn concerning the mechanism of qE: 1. Substitution of Vio by Zea in LHC-II is not sufficient for efficient dissipation of excess excitation energy. 2. Aggregation quenching of LHC-II does not require Vio, Neo nor a specific Chl pair. 3. With one exception, the pigment structure in LHC-II is rigid. 4. The two X-ray structures of LHC-II show the same energy transmitting state of the complex. 5. Crystalline LHC-II resembles the complex in the thylakoid membrane. Models of the aggregation quenching mechanism in vitro and the qE mechanism in vivo are presented as a corollary of this doctoral work. LHC-II aggregation quenching in vitro is attributed to the formation of energy sinks on the periphery of LHC-II through random interaction with other trimers, free pigments or impurities. A similar but unrelated process is proposed to occur in the thylakoid membrane, by which excess excitation energy is dissipated upon specific interaction between LHC-II and a PsbS monomer carrying Zea. At the end of this thesis, an innovative experimental model for the analysis of all key aspects of qE is proposed in order to finally solve the qE enigma, one of the last unresolved problems in photosynthesis research.
The respiratory chain is composed of protein complexes residing in the inner mitochondrial membrane of eukaryotes or in the cytoplasmic membrane of prokaryotes. This cellular energy converter transforms a redox potential stored in low potential substrates into an electrochemical potential across the respective membrane. Typical respiratory chains contain the complexes I, II, III and IV named according to their sequence in the respiratory chain reaction. Electrons of low potential substrates enter at complex I or II and are passed via complex III to complex IV where they are transferred to oxygen. The transport of electrons between the complexes is mediated by small electron shuttles like quinol or cytochrome c. Two different models describe their exchange either by (1) random collision of freely diffusible electron shuttles and membrane protein complexes or (2) arrangement of the complexes in supercomplexes enabling direct channeling of electron shuttles. In the Gram positive bacterium Corynebacterium glutamicum, the complex III to complex IV electron shuttle cytochrome c is not diffusible but a covalently bound part of the diheme cytochrome subunit QcrC of complex III. Therefore, the complexes III and IV have to form a supercomplex for electron transduction. The aim of this thesis was to purify and characterise this obligatory supercomplex III/IV of C. glutamicum. To gain sufficient biomass of C. glutamicum as starting material for purification, a phosphate buffered minimal medium was developed that enabled yield of total 120 g wet cell mass (38 g dry mass) in 12 L (6×2 L) shaking cultures. The determined conversion factor of glucose into biomass was 0.46 g/g indicating an intact respiratory chain. The yield was increased by bioreactor cultivation to ~690 g wet cell mass (~220 g dry mass) in ~10 L culture volume. A previously described homologous expression system was applied that produces the complex IV subunit CtaD with a fused Strep-tag II to facilitate purification. Affinity purifications using the Strep-tag II affinity to Strep-Tactin resin yielded a mixture of complexes and supercomplexes. Two supercomplex III/IV versions named supercomplex A and B and free complex IV were identified in this mixture by size exclusion chromatography, redox difference spectroscopy and two dimensional polyacrylamide gel electrophoresis including blue native polyacrylamide electrophoresis. The here presented downscaled blue native polyacrylamide electrophoresis method with analysis times of ~1 h enabled efficient screening of factors influencing the stability of supercomplex III/IV. The screening resulted that the integrity of supercomplex III/IV is preserved by using neutral detergents at minimal detergent to protein ratios for solubilisation and low detergent concentrations for purification and storage slightly above the required critical micellar concentration. Furthermore, pH <=7.5 is required for stability of supercomplex III/IV. Large biomass yields enabled upscaling of supercomplex III/IV affinity purification. Application of the identified stability conditions resulted in affinity purified samples free of supercomplex B. The major component supercomplex A was efficiently separated from residual free complex IV by preparative size exclusion chromatography. Concentration of purified supercomplex A by ultracentrifugation resulted in integrity of the supercomplex for several days at 4 °C. Purified supercomplex A contains ten different previously described subunits. The heme content of supercomplex A relative to the protein mass is heme A: 6.0 μmol/g, heme B: 6.5 μmol/g, and heme C: 5.8 μmol/g determined by redox difference spectroscopy and biochemical protein quantification. This indicates an equimolar ratio of complex III and complex IV in supercomplex A. Supercomplex A has quinol oxidase activity that is inhibited by stigmatellin or sodium azide. The turnover number of transferred electrons per complex III monomer is 148 s−1 at 25° C. The homogeneity and stability of the prepared supercomplex A enabled the growth of threedimensional crystals of up to 0.1 mm in length. Their composition of supercomplex A was verified by redox difference spectroscopy of intact crystals and blue native polyacrylamide electrophoresis of dissolved crystals. The crystals diffracted X-rays corresponding to a resolution of ~10 Å. Electron microscopy of negative stained samples revealed the uniform shape of purified supercomplex A particles with dimensions of 22 × 9 nm in the view plane. Combined heme quantification, size determination, determined activity, symmetry considerations, and particle shape indicate that supercomplex A has a central dimer of complex III and two monomers of complex IV on opposite sides. This conformation is functionally reasonable because it provides each complex III monomer with one complex IV monomer as electron acceptor. Therefore, the stoichiometry of supercomplex A is most likely III2IV2. The sensitivity of supercomplex A to detergents indicated a role of phospholipids in its stability. Therefore, a method for phospholipid identification and quantification was developed that is suitable for detergent solubilised crude and purified membrane protein samples. The analysis combines separation of phospholipid classes according to their head group by normal phase high performance liquid chromatography with evaporative light scattering detection. Calibration with external standard allows quantification of phospholipid amount in the range of 0.25-12 μg. The method is verified by analysing the phospholipid content of the well characterised complex III of Saccharomyces cerevisiae. The reduction of its phospholipid content during its purification steps is monitored. The complex III sample purified to crystallisation quality contains the phospholipid content that was also observed in previously reported structures determined by X-ray crystallography. Purified stable supercomplex A from C. glutamicum revealed a large content of bound phospholipids. The main differences between intact supercomplex A and a mixture of potentially disintegrated smaller complexes is that intact supercomplex A has a doubled phosphatidic acid content and an increased phosphatidyl glycerol content. The importance of the small anionic phosphatidic acid for mediation of contacts between complexes in a supercomplex is discussed. The total phospholipid content of stable supercomplex A is sufficient for a complete belt surrounding the supercomplex in the membrane plane. This indicates that also all essential internal phospholipid binding positions are occupied and potentially stabilise supercomplex A.
The function of APOBEC3G in the innate immune response against the HIV infection of primary cells
(2008)
In the past few years the regulation of HIV-1 replication by cellular cofactors has been a major topic of ongoing research. These factors potentially represent new targets for antiviral therapy as resistance will be minimized. However this requires a better understanding of the interaction of HIV-1 with these cellular factors and the immune system. The virus infects the cells of the immune system, beginning with macrophages and dendritic cells as primary target cells during transmission. The cellular cofactor, APOBEC3G was found to be an antiviral factor in macrophages, dendritic cells and primary T cells. APOBEC3G is a cytidindeaminase which causes G->A hypermutations in the HIV-Genome. Another protein which has a strong inhibitory effect on the HIV infection is Interferon alpha (IFN-alpha), however the exact reason for this has not yet been elucidated. The bacterial protein, Lipopolysaccharide (LPS) also induces a strong antiviral state in macrophages. In micro-array analysis it was shown that APOBEC3G was upregulated after the stimulation with both IFN-alpha and LPS in macrophages. The goal of this work was to investigate the role of APOBEC3G in the innate immune response to APOBEC3G. For this, the expression of APOBEC3G was examined in HIV-1 target cells after stimulation with IFN-alpha or LPS and the effect of the protein on the viral infection was examined. In the first experiments it could be shown through real time quantitative PCR that APOBEC3G was overexpressed after the stimulation with IFN-alpha or LPS. This result could be shown in monocytes derived macrophages from different blood donors. It was also shown that the overexpression of APOBEC3G correlated directly with the concentration of IFN-alpha. Through mutational analysis it could be then shown that the overexpressed APOBEC3G protein was also functional in the cells. In order to show that this was the result of APOBEC3G, the protein was the regulated through lentiviral vectors. After transduction of cell lines with lentiviral vectors containing APOBEC3G, the infection was inhibited by up to 70%. The infection was restored after the addition of shRNAs against APOBEC3G. For the further experiments, CD34+ stem cells were used. The cells were transduced the day after thawing with lentiviral vectors containing an eGFP marker gene and either APOBEC3G or shRNAs against APOBEC3G. The CD34+ cells were then cultivated and differentiated to macrophages. The cells transduced with Lentiviral vectors containing APOBEC3G had a very high expression of APOBEC3G in the cells, however the cells transduced with shRNA against APOBEC3G did not show a reduction in the protein expression. The infectivity of the transduced CD34+ and CD34 derived macrophages was then examined. It was expected that the cells transduced with APOBEC3G would show a reduced HIV-1 infection, and the cells transduced with shRNA against APOBEC3G would show an increase in infection. After the transduction and differentiation the CD34+ cells from the 3 donors were stimulated and infected with wild type HIV-1 and Vif defective HIV-1 virus. Vif is a viral protein that can bind to APOBEC3G leading it to the proteasome for degradation. The cells from the first donor transduced with APOBEC3G, were very difficult to infect. In general the shRNA against APOBEC3G had little effect on the course of infection; presumably, the shRNA against APOBEC3G was not active in most of these cells. Only the cells from the first donor showed an increase in HIV infection after the transduction with the shRNAs against APOBEC3G, this was most notably the case in the cells stimulated with IFN-alpha, which usually show very little infection. This work showed that APOBEC3G plays an important role in the innate immune response to HIV-1. The effect of APOBEC3G is both cell type as well as donor dependent. Recently, an interesting study also showed that there is a correlation between the expression of APOBEC3G in HIV infected individuals and their progression to AIDS. A better understanding of the role that APOBEC3G plays in the innate immune response would help in the search of new therapeutic possibilities. This could be done by inhibiting the Vif-APOBEC3G interaction in order to increase the amount of active APOBEC3G in the cells or increasing the APOBEC3G concentration in the cells in some manner.
This work presents a contribution to the literature on methods in search of lowdimensional models that yield insight into the equilibrium and kinetic behavior of peptides and small proteins. A deep understanding of various methods for projecting the sampled configurations of molecular dynamics simulations to obtain a low-dimensional free energy landscape is acquired. Furthermore low-dimensional dynamic models for the conformational dynamics of biomolecules in reduced dimensionality are presented. As exemplary systems, mainly short alanine chains are studied. Due to their size they allow for performing long simulations. They are simple, yet nontrivial systems, as due to their flexibility they are rapidly interconverting conformers. Understanding these polypeptide chains in great detail is of considerable interest for getting insight in the process of protein folding. For example, K. Dill et al. conclude in their review [28] about the protein folding problem that "the once intractable Levinthal puzzle now seems to have a very simple answer: a protein can fold quickly and solve its large global optimization puzzle simply through piecewise solutions of smaller component puzzles".
By translocating proteasomal degradation products into the endoplasmic reticulum (ER) for loading of major histocompatibility complex (MHC) class I molecules, the ATP binding cassette (ABC) transporter associated with antigen processing (TAP) plays a pivotal role in the adaptive immunity against infected or malignantly transformed cells. A key question regarding the transport mechanism is how the inter-domain communication and conformational dynamics of the TAP complex are connected during the peptide transport. To identify residues involved in this processes, we evolved a Trojan horse strategy in which a small artificial protease is inserted into antigenic epitopes. After binding, the TAP backbone in contact is cleaved, allowing the peptide sensor site to be mapped by mass spectrometry. Within this study, the peptide sensor and transmission interface have been identified. This region aligns with the cytosolic loop 1 (CL1) of Sav1866 and MsbA. Based on a number of experimental data and the homology to the bacterial ABC exporter Sav1866, we constructed a 3D structural model of the core TAP complex. According to this model, the CL1 and CL2 of TAP1 are extended cytosolic loops connecting the transmembrane helices (TMH) 2 and 3, and TMH4 and 5 respectively, and contact both nucleotide binding domains (NBDs) of the opposite subunit. In contrast to exporters, the cytosolic loop (named L-loop) of BtuCD importer is much shorter, and contacts only one NBD. The data confirm that the CL1 of TAP1 functions as signal transducer in ABC exporters, because it does not interfere with substrate binding but with substrate transport. The peptide contact site identified herein is restructured during the ATP hydrolysis cycle. Importantly, TAP showed a structural change trapped in the ATP hydrolysis transition state, because direct contact between peptide and CL1 is abolished. By cysteine scanning, the most conserved residues within CL1 were identified, which disrupted the tight coupling between peptide binding and transport. Together with Val-288, these residues are essential in sensing the bound peptide and inter-domain signal transmission. To characterize the molecular architecture of CL1, a convenient and minimally perturbing approach was used, which combined cysteine substitution in the CL1 region and determination of accessibility to thiol specific compounds with different properties. These studies revealed that the N-terminal region of CL1 has a good accessibility for hydrophilic (iodoacetamidofluorescein, IAF) and amphiphilic probes (BODIPY maleimide, BM), whereas the C-terminal region is accessible for hydrophobic probe (coumarin maleimide, CM). Kinetic studies of fluorescence labeling suggest that this region displayed a different accessibility to probes when the protein undergoes distinct conformations (e. g. nucleotide free state), thereby reflecting conformational transitions. Fluorescence labeling with BM induces a lost of peptide transport, whereas the peptide binding remains unaffected. These results indicate that covalent modifications of the CL1 residues influenced the inter-domain communication between transmembrane domain (TMD) and NBD. The X-loop is a recently discovered motif in the NBD of ABC exporters, which stays in close contact to the CLs. Moreover, because the X-loop precedes the ABC signature motif, it probably responds to ATP binding and hydrolysis and may transmit conformational changes to the CLs. By substitution of the highly conserved Glu-602 of TAP2 with residues that have different chemical properties, it was shown for the first time that the X-loop is a functional important element, which plays an key role in coupling substrate binding to downstream events in the transport cycle. We further verified domain swapping in the TAP complex by cysteine cross-linking. The TAP complex can be reversibly arrested either in a binding or translocation incompetent state by cross-linking of the X-loop to CL1 or CL2, respectively. These results resolve the structural arrangement of the transmission interface and point to different functions of the cytosolic loops in substrate recognition, signaling and transport.
In the present work, the photo-protection mechanisms in plants and purple bacteria were investigated experimentally at the molecular level. For this purpose, several spectroscopic methods were combined and applied to elucidate the function of carotenoids, pigments of the photosynthetic apparatus, in photo-protection. The experiments were focused on the mechanisms involved in quenching of singlet and triplet states of the electronically excited (bacterio)chlorophylls. This photosynthetic reaction events occur on an ultrafast time-scale. Measuring such short-lived events, and understanding the underlying principles, demand some of the most precise experiments and exact measurement technologies currently available. This implies certain requirements for the light source used: a suitable wavelength within the absorption band of the sample, sufficient power, and, most importantly, a pulse duration short compared to the studied reaction. Nowadays, we can achieve all this requirements using femtosecond-spectroscopic systems, which produce laser pulses shorter than 100 femtoseconds (fs). Transient absorption spectroscopy provides important information on molecular dynamics interrogating electronic transitions. The technique is based on photochemical generation of transient species with femtoseconds pump pulses and measuring transient absorption changes of the sample using a second, time delayed probe pulse which in this case is a spectrally broad white-light pulse.
Presentation of intracellular processed antigens by major histocompatibility (MHC) class I molecules to CD8+ cytotoxic T lymphocytes is mediated by the macromolecular peptide loading complex (PLC). In particular accessory proteins, including the transporter associated with antigen processing (TAP) and tapasin, play a pivotal role in the MHC class I mediated antigen presentation pathway. TAP belongs to the ATP-binding cassette (ABC) superfamily and consists of TAP1 (ABCB2) and TAP2 (ABCB3), each of which possesses a transmembrane and a nucleotide-binding domain (NBD). The ER-resident glycoprotein tapasin promotes the optimal folding and assembly of MHC-peptide complexes, and independently stabilizes the steady state expression level of TAP. In the present thesis recombinant Fv, scFv and Fab antibody fragments to human TAP from a hybridoma cell line expressing the TAP1-specific monoclonal antibody mAb148.3, were generated. The epitope of the mAb148.3 was mapped to the very last five C-terminal amino acid residues of TAP1 on solid-supported peptide arrays. The recombinant antibody fragments were heterologously expressed in E. coli and insect cells, and purified to homogeneity by affinity chromatography. The monoclonal and recombinant antibodies display nanomolar affinity to the last five C-terminal amino acid residues of TAP1 as demonstrated by enzyme linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR). Surprisingly, the recombinant antibody fragments confer thermal stability to the heterodimeric TAP complex in insect cells when incubated at elevated temperature. At the same time, TAP is arrested in a peptide transport incompetent conformation, although ATP and peptide binding to TAP are not affected. Furthermore, the recombinant antibodies were successfully used in the purification of the PLC from a human B-lymphoblastoid cell line and a novel factor, protein disulfide isomerase (PDI), was identified by matrix assisted laser desorption/ionisation-mass spectrometry (MALDI-MS). In the second part of this thesis the tapasin-MHC class I interaction was investigated. It is for this reason, that an in vitro assay had been established for direct measuring tapasin-MHC class I interactions. First, soluble single chain MHC class I molecules were engineered, choosing two MHC class I alleles: HLA-B4402 representing a highly tapasin-dependent allele and with HLA-B4405, a tapasin-independent allele was chosen. Tapasin as well as the two single chain MHC class I constructs, scB4402-b2m and scB4405-b2m, were expressed in insect cells and purified from insect cell supernatants by affinity chromatography. In contrast to the HLA-B4405 allele, which was expressed and secreted at moderate yield, the HLA-B4402 allele was expressed and trapped inside the insect cells instead of secreted into the medium. Peptide-binding and anisotropy measurements with fluorescein-labeled peptides verified the functionality of the scB4405-b2m. For further investigation of the tapasin-MHC class I interaction an in vitro assay was established using surface plasmon resonance spectroscopy. Due to the transient nature of the interaction including the decreased affinity of both interaction partners, kinetic data acquisition was difficult to evaluate. Furthermore, interaction of the scB4405-b2m with the sensor surface itself contributed to the measured interaction. Additionally, to investigate tapasin editing function, tapasin as well as the scB4405-b2m-peptide complex were tethered on fluid chelator lipid bilayers and monitored by reflectance interference (RIf) and total internal reflection fluorescence spectroscopy (TIRFS). Stable immobilization of scB4405-b2m-peptide complex as well as of tapasin was observed, unfortunately no changes in peptide dissociation kinetics monitored in the TIRFS channel were detected. Presumably, the tapasin-independent HLA-B4405 already loaded with a high affinity peptide is not influenced by the peptide-editing function of tapasin. Here, for the first time an in vitro assay was established for direct probing interactions within the various proteins of the PLC.
Hypoxic pulmonary vasoconstriction (HPV) redistributes pulmonary blood flow from areas of low oxygen partial pressure to areas of normal or relativity high oxygen availability, thus optimising the matching of perfusion to ventilation and preventing arterial hypoxemia. Generalised alveolar hypoxia results in a sustained increase in pulmonary artery pressure which in turn leads to structural changes in the walls of the pulmonary vasculature (pulmonary vascular remodelling). Recent findings have indicated a role for cytochrome P450 (CYP) epoxygenase-derived epoxyeicosatrienoic acids (EETs) in hypoxia-induced pulmonary vasoconstriction. Given that the intracellular concentration of EETs is determined by the soluble epoxide hydrolase (sEH), which metabolises EETs to their less active dihydroxyeicosatrienoic acids (DHETs), we assessed the influence of the sEH and EETs on pulmonary artery pressure, acute and chronic HPV, and pulmonary vascular remodelling in the mouse lung. In isolated lungs from wild-type mice, acute HPV was significantly increased by sEH inhibition, an effect abolished by pre-treatment with CYP epoxygenase inhibitors and the EET antagonist 14,15-EEZE. The acute hypoxia-induced vasoconstriction and EET production were greater in lungs from sEH-/- mice than from wild-type mice and sEH inhibition had no further effect on HPV in lungs from the former animals, while MSPPOH (CYP epoxygenase inhibitor) and 14,15-EEZE decreased the response. Exogenous application of 11,12-EET increased pulmonary artery pressure in a concentration-dependent manner and enhanced acute HPV in wild-type lungs, while 14,15-EET and 11,12-DHET were without significant effect on pulmonary artery pressure. 5-HT2A receptor antagonism or Rho kinase inhibition shifted the EET concentration-response curve to the right and abrogated the EET- and sEH inhibition-induced potentiation of acute hypoxic vasoconstriction. In lungs from wild-type and sEH-/- mice, hypoxic preconditioning (hypoxic ventilation for 10 minutes) enhanced the 5-HT response. 1-Adamantyl-3-cyclohexylurea (ACU), a sEH inhibitor, further amplified the hypoxia-induced 5-HT-hypersensitivity in wild-type mice. However, after hypoxic preconditioning, the sEH-/- lungs displayed a striking leftward shift in the 5-HT response. 11,12-EET can activate TRPC6 channels in endothelial cells by eliciting its translocation to the plasma membrane, more specifically to membrane domains enriched with the caveolae marker caveolin-1. This effect was also observed in rat pulmonary artery smooth muscle cells overexpressing the channel. Exposure of the latter cells to acute hypoxia also stimulated the intracellular translocation of TRPC6 to caveolae, an effect that was sensitive to the EET antagonist. The EET-induced translocation of TRPC6 channels was prevented by a 5-HT2A receptor antagonist but not by a Rho kinase inhibitor. Moreover, while acute hypoxia and 11,12-EET increased pulmonary pressure in lungs from TRPC6+/- mice, lungs from TRPC6-/- mice did not respond to either stimuli. These results indicate that the sEH and CYP-derived EETs are involved in acute HPV and that EET-induced pulmonary contraction under normoxic and hypoxic conditions involves a TRPC6 channel, a 5-HT2A receptor-dependent pathway and Rho kinase activation. In the second part of the study the role of the sEH in the development of pulmonary hypertension and vascular remodelling induced in mice by exposure to hypoxia (10% O2) for 21 days was analysed. In wild-type mice, chronic hypoxia decreased the pulmonary expression/activity of the sEH, induced right heart hypertrophy and erythropoiesis, and increased the number of partially and fully muscularised pulmonary resistance arteries (by 3-fold). Moreover, in HEK 293 cells, hypoxia (1% O2 up to 24 h) decreased sEH promoter activity by 50%. In isolated lungs, pre-exposure to chronic hypoxia significantly increased baseline perfusion pressures and potentiated the acute HPV. While an sEH inhibitor, ACU, potentiated acute HPV in lungs from mice maintained in normoxic conditions, it had no effect on HPV in lungs from mice exposed to hypoxia. The EET antagonist, 14,15-EEZE, abolished the sEH inhibitor-dependent increase in acute HPV in normoxic lungs and decreased HPV in chronic hypoxic lungs. Hypoxia-induced right heart hypertrophy and erythropoiesis were more pronounced in sEH-/- than in wild-type mice. Under normoxic and hypoxic conditions the muscularisation of resistance pulmonary arteries was greater in lungs from sEH-/- mice than in lungs from wild-type mice. sEH-/- mice also displayed an enhanced acute HPV, compared to that observed in wild-type mice and chronic exposure to hypoxia did not further potentiate acute HPV. However, in the presence of 14,15-EEZE responses returned to levels observed in normoxic lungs from wild-type animals. Furthermore, immunohistochemistry demonstrated an extensive expression of the sEH in the medial wall of pulmonary arteries from human donor lungs. Whereas sEH expression was not detectable in samples from pulmonary hypertension patients, indicating that the sEH is involved in hypoxia-induced pulmonary vascular remodelling and hypoxic pulmonary vasoconstriction. Taken together, the results presented in this thesis indicate that the expression/activity of the sEH is an important determinant of the magnitude of acute and chronic hypoxia-induced pulmonary vasoconstriction and pulmonary vascular remodelling by inactivating vasoconstrictor CYP-derived EETs. As sEH inhibitors are currently being developed for the treatment of human systemic hypertension, it should be noted that these compounds may even promote the development of pulmonary hypertension.
Three-dimensional structure of the glycine-betaine transporter BetP by cryo electron crystallography
(2008)
The soil bacterium Corynebacterium glutamicum has five secondary transporters for compatible solutes allowing it to cope with osmotic stress. The most abundant of them, the transporter BetP, performs a high affinity uptake of glycine-betain when encountering hyperosmotic stress. BetP belongs to the betaine/carnitine/choline/transporter (BCCT) family, and is predicted to have twelve transmembrane helices with both termini facing the cytoplasm. The goal of this thesis is to facilitate understanding of BetP function by determining a three dimensional (3D) model of its structure. Two-dimensional (2D) crystallization of wild-type (WT) BetP has been successfully performed by reconstitution into a mixture of E. coli lipids and bovine cardiolipin, which resulted in vesicular crystals diffracting to 7.5 Å resolution (Ziegler, Morbach et al. 2004). Diffraction patterns of these crystals however showed unfocused spots, generally due to high mosaicity. Better results were obtained by using the constitutively active mutant BetPdeltaC45 in which the first 45 amino acids of the positively charged C-terminus were removed. BetPdeltaC45 crystals obtained under the same conditions for BetP WT were concluded to be pseudo crystals, based on the inconsistence of symmetry. These crystals had BetPdeltaC45 molecules randomly up/downwards inserted into membrane crystals, and cannot be used for structure determination, even though they diffracted up to 7 Å. The problem of pseudo crystal formation could be solved by changing the lipids used for 2D crystallization to a native lipid extract from C. glutamicum cells. This change of lipids improved the crystals to well-ordered packing with exclusive p121_b symmetry. To understand the role of lipids in crystal packing and order, lipids were extracted at different stages during crystallization, and identified by using multiple precursor ion scanning mass spectrometry. The results show that phosphatidyl glycerol (PG) 16:0-18:1 is the most dominant lipid species in C. glutamicum membranes, and that BetP has a preference for the fatty acid moieties 16:0-18:1. Crystallization with synthetic PG 16:0-18:1 proved that an excess of this lipid prevents pseudo crystal formation, but these crystals did not reach the quality as previously achieved by using the C. glutamicum lipids. Apart from the effect of lipids in crystallinity, the concentration and type of salts influenced crystal growth and morphology. High salt conditions (>400 mM LiCl or KCl) yielded tubular crystals, whereas low salt conditions (<300 mM LiCl, NaCl or KCl) led to formation of up to 10 µm large sheet-like crystals. The intermediate concentration gave a mixture of sheet-like and tubular crystals. In terms of resolution, sheets diffracted better than tubes. The sheet-like crystals used for 3D map reconstruction were obtained from a dialysis buffer containing 200 mM NaCl combined with using C. glutamicum lipids. Electron microscopic images were taken from frozen-hydrated crystals using a helium-cooled JEOL 300 SFF microscope or a liquid nitrogen-cooled FEI Tecnai G2 microscope at 300 kV, which allowed optimal data collection and minimized radiation damage to the sample. More than 1000 images of tilt angles up to 50° were taken and evaluated using optical diffraction of a laser beam. The best 200 images were processed with the MRC image processing software package, and 79 images from different tilt angles were merged to the final data set used for calculation of a 3D map at a planar resolution of 8 Å. The structure shows BetPdeltaC45 as a trimer with each monomer consisting of 12 transmembrane alpha-helices. Protein termini and loop regions could not be determined due to the limited resolution of the map. Six of the twelve helices line a central cavity forming a potential substrate-binding chamber. Each monomer shows a central cavity in different sizes and shapes. Thus, the constitutively active BetPdeltaC45 thus forms an unusual asymmetric homotrimer. BetP most likely reflects three different conformational states of secondary transporters: the cytoplasmically open (C), the occluded (O), and the periplasmically open (P) states. The C and O states are similar to BetP WT projection structure, while the P state is discrepant and highly flexible due to the shape and size of the central cavity as well as the lowest intensity of the density. The observation of the P state corresponds well to the constitutively active property of BetPdeltaC45. For the high resolution structure of the C and O states are available, this work presents the first structural information of the P state of a secondary transporter.
The research presented in this thesis characterizes U2AF homology motifs (UHM) and their interactions with UHM ligand motifs (ULM) in the context of splicing regulation. UHM domains are a subgroup of RNA recognition motifs (RRM) originally discovered in the proteins U2AF65 and U2AF35. Whereas canonical RRMs are usually involved in binding of RNA, UHM domains bind tryptophan containing linear protein motifs (ULM) instead. In the first article, we analyze the complex network of interactions between splicing factors and RNA that initiate the assembly of the spliceosome at the 3´ splice site of an intron. The protein U2AF65 binds a pyrimidine-rich element in introns and recruits U2snRNP by binding its protein component SF3b155. My contribution was to define the binding site of the protein U2AF65 to the intrinsically unstructured N-terminus of the scaffolding protein SF3b155. I could show that the UHM domain of U2AF65 recognizes a ULM in SF3b155, and that this binding site is not overlapping with the binding sites of other splicing factors, like p14, to SF3b155. As the U2AF65-UHM:SF3b155-ULM interaction is mutually exclusive with an interaction between U2AF65-UHM and a ULM in the splicing factor SF1, which was reported to initially recognize the branch point sequence, my results provide the molecular details on how SF3b155 replaces SF1 during spliceosomal reorganizations. In the second article, we show that overexpression of the UHM domain of the splicing factor SPF45 induces exon 6 skipping in the pre-mRNA of Fas (CD95/APO-1). I provide evidence for in vitro binding of SPF45-UHM to ULM sequences in the splicing factors U2AF65, SF1, and SF3b155. I crystallized free and SF3b155-bound SPF45 UHM and solved both structures by X-ray crystallography. The analysis of the complex interface and sequence differences in the ULMs allowed me to design mutations of SPF45-UHM, which selectively inhibit binding to distinct ULMs. After assessing the ULM binding properties in vitro, we could show that the activity of SPF45-UHM in influencing the splicing pattern of Fas relies on interactions with SF3b155 and/or SF1, but that an interaction with U2AF65 is dispensable. A mechanism for the activity of SPF45-UHM could thus be engaging in ULM interactions and thus interfering with the network of interactions that initiate the assembly of the spliceosome at the 3´splice site, as described above. In the third article, we describe an unusual flexible homodimerization mode of the UHM in the splicing factor Puf60, which enables simultaneous interactions with ULM sequences on other splicing factors. I could show that the NMR relaxation properties of Puf60-UHM are inconsistent with a model of a rigid dimer, but rather indicate a dimerization via a flexible linker. I identified a flexible loop in the peptide backbone of Puf60-UHM, and showed that mutiation of acidic residues in this loop impairs the dimerization. To analyze the dimerization interface in further detail, I solved the structure of Puf60-UHM by X-ray crystallography. The acidic residues in the flexible loop of one UHM dimer subunit mediate the dimerization by contacting basic residues on the β-sheet surface of the other dimer subunit. Differences in the four dimer interfaces observed for the eight molecules in the asymmetric unit of the crystal support the model of an undescribed, flexible mode of dimerization, and thus complement the NMR relaxation data. Furthermore, I could show that the Puf60-UHM dimer and U2AF65-UHM contact different ULM sequences on the SF3b155 N-terminus in vitro, thus providing a possible explanation for the mutual cooperative activation of Puf60 and U2AF65 in splicing assays described in the literature. The fourth article is a review about recent research on the recognition of DNA double strand breaks (DSB) by covalent histone modifications. The p53 binding protein 1 (53BP1) is a DSB sensor and a checkpoint protein for mitosis. Recent crystallographic evidence indicates that 53BP1 recognizes DSB sites by binding histone H4 dimetylated at lysine 20 (H4-K20). We provide a comprehensive overview of the atomic resolution structures that revealed how proteins can specifically recognize histone tail modifications, especially methylated lysines, to read the information stored in what is called the histone code.
The focus of this thesis has been to further advance and develop existing NMR techniques for the study of protein folding. In order to do so, experimental as well as theoretical approaches have been pursued. From the theoretical side, a successful attempt to the development of a general theory for the treatment of residual dipolar couplings in the case of unfolded proteins has been undertaken. Information contained in residual dipolar couplings is especially valuable due to its long-range nature. The dynamic character of unfolded states of proteins, which may be composed of distinct subsets of conformations, renders reliable interpretation of data a non-trivial task. Statistical-coil-based approaches have been shown to be powerful in data interpretation. A consistent theory based on fundamental polymer physics, however, had not been presented so far. The herein presented model addresses this problem building on the original work by Annila and co-workers. In this work, several shortcomings have been identified. These shortcomings have been corrected here leading to a general approach for the treatment of residual dipolar couplings of unfolded proteins. More specifically, it is shown that, in the case of fully unfolded proteins aligned by a steric mechanism, basic dependencies of dipolar couplings such as on chain length and location with in the chain can be analysed in simple analytical terms. The main predictions of the model are compared to experimental data showing reasonable agreement. The presented mathematical framework is principally suited for various improvements which could include the treatment of long-range interactions and of the actual geometry of the given aligment medium. From the experimental side, bovine alpha-lactalbumin has been chosen as a model system for the development of improved time-resolved 1D NMR methods aiming at the observation of conformational transitions by kinetic means. The presented results show that high-quality data can now be obtained at protein concentrations as low as 100uM. Rate constants characterising distinct conformational transitions of up to 8/s have been measured. These are the fastest rate constants which have been reported so far for protein folding events. The NMR data supplemented by complementary biophysical data furthermore demonstrate that the folding of bovine alpha-lactalbumin is more complex than has been anticipated. All data are consistent with a triangular folding mechanism involving parallel pathways of folding for formation of the native state of the protein. Interestingly, such a folding mechanism has also been found for the highly structurally homologous protein lysoyzme from hen egg white. Evidence is presented that the guiding role of long-range interactions in the unfolded state of lysoyzme for mediating intersubdomain interactions during folding is replaced in the case of bovine alpha-lactalbumin by the Ca2+ binding site.
Life-threatening fungal infections are becoming increasingly common for immunocompromised patients such as those with AIDS, or those undergoing organ transplantation or chemotheraphy, as well as for other health-vulnerable patients. Excellent targets for antifungal drugs are chitin synthases, which are essential for survival of the fungus and lacking in humans. To design new antifungal drugs, knowledge of the three-dimensional structure and mechanism of action of chitin synthases are crucial. Chitin synthases are members of an important family of enzymes that synthesize structural polysaccharides, such as cellulose, β(1,3)-glucan, β(1,4)-mannan and hyaluronan. Therefore, chitin synthases could be used as a model system to understand these more complex enzymes, which are also of major medical and commercial importance. Chitin synthase 2 from Saccharomyces cerevisiae (ScChS2), the protein under study, is an integral membrane protein that synthesizes the primary septum between mother and daughter cells in budding yeast. It is essential for proper cell separation and expected to be highly regulated. An important aspect is that ScChS2 shows 55% sequence identity and is functionally analogous to chitin synthase 1 from the human opportunistic pathogen Candida albicans, this enzyme is also essential for cell survival (Munro, Winter et al. 2001). ...
Self-inactivating gammaretroviral vectors for the gene therapy of chronic granulomatous disease
(2008)
Chronic granulomatous disease (CGD) is a rare inherited primary immunodeficiency characterized by defective intracellular oxidative killing of ingested invading microbes by PMN and monocytes. It is caused by mutations in one of the four genes coding for the essential subunits of the NADPH oxidase (gp91phox, p47phox, p67phox and p22phox). Approximately 75% of the CGD cases are due to mutations in the gp91phox gene. If regular care and conventional therapy fail, the recommended therapy is allogeneic bone marrow transplantation (BMT), but only if a matched donor is available. A therapeutic option for patients lacking suitable donors is the genetic modification of autologous hematopoietic stem cells. The gene therapy offers an interesting alternative to BMT since it implies a less invasive treatment and represents a possibly unique curative option for patients with no suitable donor. Gammaretroviral vectors were already used in some gene therapy trials for CGD and other immunodeficiencies showing relevant clinical benefit. However, these trials uncovered an unexpected mutagenic side effect. If the retrovial integration ocurrs near to, or into proto-oncogenes this might lead to clonal dominance or even malignant transformation (Hacein-Bey-Abina et al., 2003a; Ott et al., 2006). Therefore, there was a need to further improve the safety of these vectors and to this end the self-inactivating gammaretroviral vectors were engineered. Non essential sequences for virus infectivity and integration, which might influence the surrounding gene expression, were deleted in these vectors. In the first set of experiments, a series of SIN gamma retroviral vectors was cloned driving the expression of the wild-type gp91phox cDNA under the control of a viral constitutive SFFV promoter. However initial studies with these vectors failed because the titers of the virus produced by transient transfection protocols were extremely low (<5x105 TU/ml). Therefore, a codon optimization of the gp91phox cDNA was considered as an alternative. The codon optimized synthetic gp91phox gene was used to construct a SIN gammaretroviral vector, again under the control of the SFFV promoter (Schambach et al., 2006c). With this vector an increase in titer was observed compared to the native gp91phox sequence, which was due to the improved transcription in 293T transfected cells. The enhancement of the synthetic gp91phox transcription led to a higher internal transcript production and protein expression. An enhanced superoxide production in transduced myelomonocytic X-CGD PLB-985 populations was also detected. All these data indicate that the synthetic gp91phox might represent an excellent alternative to those former constructs expressing the native gp91phox transgene. Since it was postulated that the SFFV promoter could still cause transactivation of neighboring genes due to its strength (Modlich et al., 2006), three different non-viral promoters were tested, one constitutive (the EFs promoter) and two myeloid-specific promoters (the c-fes and MRP8 promoter). The three SIN gammaretroviral vectors were able to generate high titers after transient transfection of 293T packaging cells, to efficiently transduce the X-CGD PLB-985 cell line and to reconstitute the NADPH oxidase activity to a high degree. In mouse transplantation experiments, the EFs promoter showed a high variable transgene expression in the different lineages analyzed, and the c-fes promoter showed also a ubiquitinous expression. In contrast, the MRP8 promoter showed a high myeloid specificity since gp91phox expression in mSca-1+ cells and lymphoid B cells from transplanted mice was extremly low and even absent. However, the lowest levels of transgene expression were observed in the myeloid populations both in bone marrow and peripheral blood with this vector. When the oxidase reconstitution ability of these promoters was tested, the numbers of superoxide producing cells obtained were similar than those observed in the clinical X-CGD trial conducted by the groups of Dr. M. Grez and Prof. R. A. Seger (over 35% in one patient and ~15% in the second), which led to the eradication of therapy refractory infections (Ott et al., 2006). Between the three constructs, the MRP8 promoter was less effective in restoring the NADPH oxidase activity than the EFs and c-fes promoters. The c-fes promoter reached the highest levels of DHR reactive cells in the highest number of mice. Overall, these data showed that between all constructs tested, the c-fes containing construct in combination with the codon optimized gp91phox sequence showed the best performance within the SIN gammaretroviral backbone. It generated the highest titers in combination with a better NADPH oxidase reconstituting ability. One main goal in the development of SIN gammaretroviral vectors is reducing the genotoxic effect due to random vector integration. An improved gene transfer and expression, and a constant performance are also highly desirable. The present study shows that the c-fes SIN vector in combination with the synthetic gp91phox may be considered as an effective gene therapy strategy for the restoration of the NADPH oxidase activity in CGD. It allows the use of a cellular promoter generating adequate physiological levels of the therapeutic protein and reduces the number of vector copies required for a therapeutic effect.
Development of chromium(VI)-free defect etching solutions for application on silicon substrates
(2008)
Determination of the distribution of halocarbons in the tropical upper troposphere and stratosphere
(2008)
The aim of this thesis was to investigate distributions of 32 volatile chlorinated and/or brominated halocarbons that are currently believed to be present in the tropical upper troposphere and stratosphere and to contribute to stratospheric ozone depletion and also to global warming. For this purpose an analytical system was established, which is capable to measure ultra-low concentrated atmospheric trace gases. A quadrupole Mass Spectrometric (MS) Detector was attached to an existing Gas Chromatograph with pre-concentration system and Electron Capture Detector (ECD). The characterisation of the chromatographic system was significantly enhanced by the subsequent identification of 48 additional volatile organic compounds. Furthermore a Gaussian fit algorithm, which was developed in the workgroup, was applied to the chromatographic signals. This algorithm was proven to reflect peaks quantitatively and to enhance the performance of the integration process – especially the reproducibilities for peaks with a low signal to noise ratio. As it is known that the Electron Capture Detector responds nonlinear the new MS detector was checked for such behaviour and found to respond linear. In logical consistency the complete quantification process including e.g. pre-concentration of trace gases and signal integration can be considered as linear responding within the investigated parameter ranges. Moreover, the long term stability of the targeted halocarbons was proven inside the calibration standard containers over a period of 25 months. Many substances were also found to be stable inside the containers used for storage of air samples but a number of substances showed significant concentration changes. These were mainly CH3Cl (methyl chloride), CH3Br (methyl bromide), CH2Cl2 (dichloromethane), CHCl3 (chloroform), CCl4 (tetrachloromethane), C2Cl4 (tetrachloroethene), CH3CCl3 (methyl chloroform), CH2ClCH2Cl (1,2-dichloroethane) und C2H5Cl (chloroethane). But the number of affected substances and also the corresponding concentration changes varied between the individual containers. A systematic investigation of the influence of possible causes (e.g. air sampling methods, container materials) is recommended. Results from both internal detectors were compared and revealed biases and disadvantages of the ECD caused by its lower selectivity and its nonlinear response behaviour. Consequently the MS detector was chosen for the quantification of atmospheric trace gases. The quantification process was performed relative to externally calibrated air standards. To assess the uncertainties connected with different absolute calibration scales cross-comparisons between calibration standards of three different laboratories were carried out. Most substances’ calibrations agreed within the measurement uncertainties but significant differences were observed for CF2ClBr (H1211), CH3Cl (methyl chloride), CH2Cl2 (dichloromethane), CHCl3 (chloroform), CCl4 (tetrachloromethane) and CH3CCl3 (methyl chloroform). As five of these substances were also observed to show concentration changes inside sample containers it is likely, that such changes are responsible for calibration differences. In addition to the detailed assessment of uncertainties connected with the analytical quantification process a set of air samples was available for measurements. These samples mainly originated from the upper troposphere and lower and middle stratosphere in the tropics and the determined halocarbon quantities were used to investigate their distributions in the respective atmospheric regions. In detail, the altitudinal distributions and interrelations of 17 long-lived halocarbons in the tropical stratosphere were determined and compared with those of other stratospheric regions. Tracer-tracer-correlations of these substances in the tropical stratosphere were found to differ from those in mid- and high-latitudes. Characteristic fit functions relative to CF2Cl2 (F12) which are valid for the tropical stratosphere in 2005 were derived as well as time-independent fit functions of fractional release factors (FRFs) relative to the mean age of air. Both sets of correlations could be used for the parameterisation and evaluation of models and also to reassess the Global Warming Potentials (GWPs) of the corresponding halocarbons which might affect future climate predictions. However, the data set on halocarbons in the tropical stratosphere is still insufficient to investigate the variability of tracer-tracer-correlations and FRFs caused by dynamical and photochemical processes. Therefore it is important for future research to perform additional measurements there and – if possible – to extend the measurements to the upper tropical stratosphere in order to characterise the sink of those halocarbons that are still present in these altitudes. In addition, the amount of chlorine and bromine present in the form of organic compounds inside and above the main stratospheric entrance region (the Tropical Tropopause Layer, TTL) was quantified in the frame of a case study. This was possible because of a cooperation with scientists from the University of East Anglia which carried out measurements of six additional halocarbons leading to a total of 28 quantified target substances. Ten of these substances have short atmospheric lifetimes compared with the mean transport times of tropospheric air to the stratosphere (i.e. lifetimes below 0.5 years) and show non-uniform distributions in the upper troposphere. The contribution of these substances to stratospheric ozone depletion is subject of an ongoing scientific debate. In the performed case study a fraction range of short-lived halocarbons of 6 – 8 % (0.98 – 1.25 ppt) relative to the sum of bromine from organic substances and of 1.1 – 1.4 % (36.6 – 47.1 ppt) for the corresponding sum of chlorine was calculated to enter the stratosphere above Brazil in June 2005. Moreover by combining the data with tropospheric reference data and age of air observations the abundances of inorganic chlorine and bromine (Cly and Bry) were derived. At an altitude of 34 km an amount of 3062 ppt of Cly and 17.5 ppt of Bry from organic source gases was calculated. The latter is significantly lower than Bry mixing ratios inferred from quasisimultaneous BrO measurements at 33 km altitude above Brazil (Dorf, 2005, Dorf et al., 2008). But at the University of East Anglia indications for the presence of unknown brominated organic substances in the TTL were found which might cause this difference. Finally, a major result of this thesis adds to the knowledge of the composition of the troposphere as three Chlorofluorocarbons (CFCs) were first observed. Trifluorochloroethene, 3-chloropentafluoropropene and 4,4-dichlorohexafluoro-1-butene were found in air samples collected at the Taunus Observatory near Frankfurt (Main) and the Jungfraujoch High Altitude Research Station in Switzerland (Laube and Engel, 2008). Identification was possible because of an air plume containing high concentrations of these substances. It is suggested that the abundances found on this occasion originated from a local source. The atmospheric lifetimes of these substances are expected to be rather short as they contain a double bond. A quantitative calibration could only be derived for trifluorochloroethene but not for the other species by now. Thus, a relative sensitivity method was derived to get a first indication of the observed atmospheric abundances. All three CFCs could also be detected in air masses representative of background conditions, though with much lower concentrations. These species and some of their degradation products are toxic and could also be relevant for stratospheric and tropospheric ozone depletion. It is important to find out more about their atmospheric distributions, lifetimes, sinks and sources and their ability to reach the stratosphere to assess their possible influence on the global atmosphere. This will be done in the frame of the project "CLEARFOGG – Checking Layers of the Earths AtmospheRe For halogenated Ozone-depleting and Greenhouse Gases". This research project aims to perform a systematic scan of the atmosphere because there are indications for the presence of a number of halogenated organic compounds which are unknown by now. It was recently decided to be funded by the British National Environmental Research Council and will be carried out at the University of East Anglia mainly by the author of this thesis.
Proteorhodopsin (PR) originally isolated from uncultivated γ-Proteobacterium as a result of biodiversity screens, is highly abundant ocean wide. PR, a Type I retinal binding protein with 26% sequence identity, is a bacterial homologue of Bacteriorhodopsin (BR). The members within this family share about 78% of sequence identity and display a 40 nm difference in the absorption spectra. This property of the PR family members provides an excellent model system for understanding the mechanism of spectral tuning. Functionally PR is a photoactive proton pump and is suggested to exhibit a pH dependent vectorality of proton transfer. This raises questions about its potential role as pH dependent regulator. The abundance of PR in huge numbers within the cell, its widespread distribution ocean wide at different depths hints towards the involvement of PR in utilization of solar energy, energy metabolism and carbon recycling in the Sea. Contrary to BR, which is known to be a natural 2D crystal, no such information is available for PR til date. Neither its functional mechanism nor its 3D structure has been resolved so far. This PhD project is an attempt to gain a deeper insight so as to understand structural and functional characterization of PR. The approach combines the potentials of 2D crystallography, Atomic Force Microscopy and Solid State NMR techniques for characterization of this protein. Wide range of crystalline conditions was obtained as a result of 2D crystallization screens. This hints towards dominant protein protein interactions. Considering the high number of PR molecules reported per cell, it is likely that driven by such interactions, the protein has a native dense packing in the environment. The projection map represented low resolution of these crystals but suggested a donut shape oligomeric arrangement of protein in a hexagonal lattice with unit cell size of 87Å*87Å. Preliminary FTIR measurements indicated that the crystalline environment does not obstruct the photocycle of PR and K as well as M intermediate states could be identified. Single molecule force spectroscopy and atomic force microscopy on these 2D crystals was used to probe further information about the oligomeric state and nature of unfolding. The data revealed that protein predominantly exists as hexamers in crystalline as well as densely reconstituted regions but a small percentage of pentamers is also observed. The unfolding mechanism was similar to the other relatively well-characterized members of rhodopsin family. A good correlation of the atomic force microscopy and the electron microscopy data was achieved. Solid State NMR of the isotopically labeled 2D crystalline preparations using uniformly and selectively labeling schemes, allowed to obtain high quality SSNMR spectra with typical 15N line width in the range of 0.6-1.2 ppm. The measured 15N chemical shift value of the Schiff base in the 2D crystalline form was observed to be similar to the Schiff base chemical shift values for the functionally active reconstituted samples. This provides an indirect evidence for the active functionality of the protein and hence the folding. The first 15N assignment has been achieved for the Tryptophan with the help of Rotational Echo Double Resonance experiments. The 2D Cross Polarization Lee Goldberg measurements reflect the dynamic state of the protein inspite of restricted mobility in the crystalline state. The behavior of lipids as measured by 31P from the lipid head group showed that the lipids are not tightly bound to the protein but behave more like the lipid bilayer. The 13C-13C homonulear correlation experiments with optimized mixing time based on build up curve analysis, suggest that it is possible to observe individual resonances as seen in case of glutamic acid. The signal to noise was good enough to record a decent spectrum in a feasible period. The selective unlabeling is an efficient method for reduction in the spectral overlap. However, more efficient labeling schemes are required for further characterization. The present spectral resolution is good for individual amino acid investigation but for uniformly labeled samples, further improvement is required.
Cellular metabolism can be envisaged by fluorescence lifetime imaging of fluorophores sensitive to specific intracellular factors such as [H+], [Ca2+], [O2], membrane potential, temperature, polarity of the probe environment, and alterations in the conformation and interactions of macromolecules. Lifetime measurements of the probes allow the quantitative determination of the intracellular factors. Fluorescence microscopy taking advantage of time-correlated single photon counting is a novel method that outperforms all other techniques with its single photon sensitivity and picoseconds time resolution. In this work, a time- and space-correlated single photon counting system was established to investigate the behavior of 2-(4-(dimethylamino)styryl)-1-methylpyridinium iodide (DASPMI) in living cells. DASPMI is known to selectively stain mitochondria in living cells. The uptake and fluorescence intensity of DASPMI in mitochondria is a dynamic measure of membrane potential. Hence, an endeavour was made to elucidate the mechanism of DASPMI fluorescence by obtaining spectrally-resolved fluorescence decays in different solvents. A bi-exponential decay model was sufficient to globally describe the wavelength dependent fluorescence in ethanol and chloroform. While in glycerol, a three-exponential decay model was necessary for global analysis. In the polar low-viscous solvent water, a mono-exponential decay model fitted the decay data. The sensitivity of DASPMI fluorescence to solvent viscosity was analysed using various proportions of glycerol/ethanol mixtures. The lifetimes were found to increase with increasing solvent viscosity. The negative amplitudes of the short lifetime component found in chloroform and glycerol at the longer wavelengths validated the formation of new excited state species from the initially excited state. Time-resolved emission spectra in chloroform and glycerol showed a biphasic increase of spectral width and emission maxima. The spectral width had an initial fast increase within 150 ps and a near constant thereafter. A two-state model based on solvation of the initially excited state and further formation of TICT state has been proposed to explain the excited state kinetics and has been substantiated by the de-composition of time-resolved spectra. The knowledge of DASPMI photophysics in a variety of solvents now provides the means of deducing complex physiological parameters of mitochondria from its behavior in living cells. Spatially-resolved fluorescence decays from single mitochondria or only very few organelles of XTH2 cells signified distinctive three-exponential decay kinetics of viscous environment. Based on DASPMI photophysics in a variety of solvents, these lifetimes have been attributed to the fluorescence from locally excited state (LE), intramolecular charge transfer state (ICT) and twisted intramolecular charge transfer (TICT) state. A considerable variation in lifetime among mitochondria of different morphology and within single cell was evident corresponding to the high physiological variations within single cells. Considerable shortening of the short lifetime component (τ1) under high membrane potential condition, such as in the presence of ATP and/or substrate, was similar to quenching and dramatic decrease of lifetime in polar solvents. Under these conditions τ2 and τ3 increased with decreasing contribution. Upon treatment with ionophore nigericin, hyperpolarization of mitochondria resulted in remarkable shortening of τ1 from 159 ps to 38 ps. Inhibiting respiration by cyanide resulted in notable increase of mean lifetime and decrease of mitochondrial fluorescence. Increase of DASPMI fluorescence on conditions elevating mitochondrial membrane potential has been attributed to uptake according Nernst distributions, to de-localisation of π electrons, quenching processes of the methyl pyridinium moiety and restricted torsional dynamics at the mitochondrial inner membrane. Accordingly, determination of anisotropy in DASPMI stained mitochondria in living XTH2 cells, revealed dependence of anisotropy on membrane potential. Such changes in anisotropy attributed to restriction of the torsional dynamics about the flexible single bonds neighboring the olefinic double bond revealed the previously known sub-mitochondrial zones with higher membrane potential along its length. Membrane-potential-dependent changes in anisotropy have further been demonstrated in senescent chick embryo fibroblasts. In conclusion, spectroscopic observations of excited-state kinetics of DASPMI in solvents and its behavior in living cells had revealed for the first time its localisation, mechanism of voltage sensitive fluorescence and its membrane-potential-dependent anisotropy in living cells. The simultaneous dependence of DASPMI photophysics on mitochondrial inner membrane viscosity and transmembrane potential has been highlighted.
Pulsed electron-electron double resonance (PELDOR) is a well established method concerning nanometer distance measurements involving two nitroxide spin-labels. In this thesis the applicability of this method to count the number of spins is tested. Furthermore, this work explored the limits, up to which PELDOR data obtained on copper(II)-nitroxide complexes can be quantitatively interpreted. Spin counting provides access to oligomerization studies – monitoring the assembly of homo- or hetero-oligomers from singly labeled compounds. The experimental calibration was performed using model systems, which contain one to four nitroxide radicals. The results show that monomers, dimers, trimers, and tetramers can be distinguished within an error of 5% in the number of spins. Moreover, a detailed analysis of the distance distributions in model complexes revealed that more than one distance can be extracted from complexes bearing several spins, as for example three different distances were resolved in a model tetramer – the other three possible distances being symmetry related. Furthermore, systems exhibiting mixtures of oligomeric states complicate the analysis of the data, because the average number of spin centers contributes nonlinearly to the signal and different relaxation behavior of the oligomers has to be treated explicitly. Experiments solving these problems are proposed in the thesis. Thus, for the first time spin counting has been experimentally calibrated using fully characterized test systems bearing up to four spins. Moreover, the behavior of mixtures was quantitatively interpreted. In addition, it has been shown that several spin-spin distances within a molecule can be extracted from a single dataset. In the second part of the thesis PELDOR experiments on a spin-labeled copper(II)-porphyrin have been quantitatively analyzed. Metal-nitroxide distance measurements are a valuable tool for the triangulation of paramagnetic metal ions. Therefore, X-band PELDOR experiments at different frequencies have been performed. The data exhibits only weak orientation selection, but a fast damping of the oscillation. The experimental data has been interpreted based upon quantitative simulations. The influence of orientation selection, conformational flexibility, spin-density distribution, exchange interaction J, as well as anisotropy and strains of the g-tensor has been examined. An estimate of the spin-density delocalization has been obtained by density functional theory calculations. The dipolar interaction tensor was calculated from the point-charge model, the extension of the point-dipole approximation to several spin bearing centers. Even assuming asymmetric spin distributions induced by an ensemble of asymmetrically distorted porphyrins the effect of delocalization on the PELDOR time trace is weak. The observed damping of dipolar oscillations has been only reproduced by simulations, if a small distribution in J was assumed. It has been shown that the experimental damping of dipolar modulations is not solely due to conformational heterogeneity. In conclusion the quantitative interpretation of PELDOR data is extended to copper-nitroxide- and multi-spin-systems. The influence of the mean distance, of the number of coupled spins, of the conformational flexibility, of spin-density distribution and of the electronic structure of the spin centers has been analyzed using model systems. The insights on model compounds mimicking spin-labeled biomacromolecules – in oligomeric or metal bound states – calibrate the method with respect to the information that can be deduced from the experimental data. The resulting in-depth understanding allows correlating experimental results (from for example biological systems) with models of structure and dynamics. It also opens new fields for PELDOR as for example triangulation of metal centers and oligomerization studies. In general, this thesis has demonstrated that modern pulsed electron paramagnetic resonance techniques in combination with quantitative data analysis can contribute to a detailed insight into molecular structure and dynamics.
Antibiotic resistance of pathogenic bacteria is a major worldwide problem. Bacteria can resist antibiotics by active efflux due to multidrug efflux pumps. The focus of this study has been the mycobacterial multidrug transporter TBsmr because it belongs to the small multidrug resistance (SMR) family whose members are a paradigm to study multidrug efflux due to their small size. SMR proteins are typically 11-12 kDa in size and have a four-transmembrane helix topology. They bind cationic, lipophilic antibiotics such as ethidium bromide (EtBr) and TPP+, and transport them across the membrane in exchange for protons. To understand the molecular mechanism of multidrug resistance, we have to gain information about the structure and function of these proteins. The research described in this thesis aimed to deduce details about the topology, transport cycle and key residues of TBsmr using biophysical techniques. Solid-state NMR (ssNMR) can provide detailed insight into structural organization and dynamical properties of these systems. However, a major bottleneck is the preparation of mg amounts of isotope labeled protein. In case of proteoliposomes, the problem is compounded by the presence of lipids which have to fit into the small active volume of the ssNMR rotor. In Chapter 3, an enhanced protein preparation is described which yields large amounts of TBsmr reconstituted in a native lipid environment suitable for further functional and structual studies. The achieved high protein-to-lipid ratios made a further characterization by ssNMR feasible. The transport activity and oligomeric state of the reconstituted protein in different types of lipid was studied as shown in Chapter 4. The exact oligomeric state of native SMR proteins is still uncertain but a number of biochemical and biophysical studies in detergent suggest that the minimal functional unit capable of binding substrate is a dimer. However, binding assays are not ideal since a protein may bind substrate without completing the transport cycle which can only be shown for reconstituted protein in transport assays.By combining functional data of a TPP+ transport assay with information about theoligomeric state of reconstituted TBsmr obtained by freeze-fracture electron microscopy, it could be shown that lipids affect the function and the oligomeric state of the protein, and that the TBsmr dimer is the minimal functional unit necessary for transport. The transport cycle must involve various conformational states of the protein needed for substrate binding, translocation and release. A fluorescent substrate will therefore experience a significant change of environment while being transported, which influences its fluorescence properties. Thus the substrate itself can report intermediate states that form during the transport cycle. In Chapter 5, the existence of such a substrate-transporter complex for the TBsmr and its substrate EtBr could be shown. The pH gradient needed for antiport has been generated by co-reconstituting TBsmr with bacteriorhodopsin. The measurements have shown the formation of a pH-dependant, transient substrate-protein complex between binding and release of EtBr. This state was further characterized by determining the Kd, by inhibiting EtBr transport through titration with non-fluorescent substrate and by fluorescence anisotropy measurements. The findings support a model with a single occluded intermediate state in which the substrate is highly immobile. Liquid-state NMR is a useful tool to monitor protein-ligand interactions by chemical shift mapping and thus identify and characterize important residues in the protein which are involved in substrate binding. In agreement with previous studies (Krueger-Koplin et al., 2004), the detergent LPPG was found to be highly suitable for liquid-state NMR studies of the membrane protein TBsmr and 42% of the residues could be assigned, as reported in Chapter 6. However, no specific interactions with EtBr were found. This observation was confirmed by LILBID mass spectrometry which showed that TBsmr was predominantly in the non-functional monomeric state. Functional protein was prepared in proteoliposomes which can be investigated by solidstate NMR (Chapter 7). Besides the essential E13, the aromatic residues W63, Y40, and Y60 have been shown to be directly involved in drug binding and transport. Different isotope labeling strategies were evaluated to improve the quality of the NMR spectra to identify and characterize these key residues. In a single tryptophan mutant of reconstituted TBsmr W30A, the binding of ethidium bromide could be detected by 13C solid-state NMR. The measurements have revealed two populations of the conserved W63 residue with distinct backbone structures in the presence of substrate. There is a controversy about the parallel or anti-parallel arrangement of the protomers in the EmrE dimer (Schuldiner, 2007) but this structural asymmetry is consistent with both a parallel and anti-parallel topology.
Colorectal cancer is one of the most cause of cancer and death in Western societies. Recently, histone deacetylase inhibitors (HDIs), which regulate transcription through modification of chromatin structure, received considerable interest on the ground of they ability to stop the growth and induce cell death in colon cancer tumours, representing a promising transcriptional cancer therapy. This kind of cancer initiates with an activating mutation in the Wnt cascade, allowing the nuclear import of ß-catenin binding to LEF/TCF. This induces the overexpression of growthpromoting oncogenes affecting the cell cycle arrest, lineage-specific cell differentiation and apoptosis processes. In addition, ß-catenin also participates in cell-cell adhesion via interactions with E-cadherin, which can be repressed by families of transcription factors Snail and ZEB. This, and gain of vimentin has been closely correlated with local invasion and metastasis since they avoid the induction of apoptosis through the loss of cell anchorage, a phenomenon called anoikis. In this process the inactivation of the kinases Src an FAK provoking disruption of focal adhesion complexes through is involved. LAQ824 is a HDAC inhibitor derivative of hydroxamic acid, which present antitumor effect in colon and other cancer cells. The aim of this study is to analyse the effect of LAQ824 in cell proliferation, apoptosis, motility and tumour invasion in a colon carcinoma model based on the adenoma-carcinoma sequence descrying trough which pathways LAQ824 is able to cause these effects. Here I demonstrate for the first time that a HDAC inhibitor, LAQ824, induces detachmentinduced cell death of colon cancer cell lines HCT116 and HT-29, a phenomenon called anoikis, in a caspase-dependent and p53-independent manner. In this process the component of the Wnt signalling pathway ß-catenin is involved. Furthermore LAQ824 upregulates the adhesion molecule E-cadherin expression in these cell lines independently of its repressor Snail, but probably mediated by the repressor ZEB. In addition LAQ824-induced anoikis is caused by disruption of focal adhesion complexes through inhibition of the activity of the kinases FAK and Src inhibiting cell motility indicating a strong antimetastatic potential for LAQ824.