Refine
Year of publication
- 2014 (25) (remove)
Document Type
- Doctoral Thesis (25) (remove)
Language
- English (25) (remove)
Has Fulltext
- yes (25)
Is part of the Bibliography
- no (25)
Keywords
- Beschleuniger (2)
- Radio Frequenz Quadrupol (2)
- Ageing (1)
- Chopper (1)
- Coulombdissoziation (1)
- Coulombspaltung (1)
- FAIR (1)
- Functional Renormalization Group (1)
- Gammaspectroscopy (1)
- Gammaspektroskopie (1)
Institute
- Physik (25) (remove)
The present work deals with the integration of variable renewable energy sources, wind and solar energy into the European and US power grid. In contrast to other networks, such as the gas supply mains, the electricity network is practically not able to store energy. Generation and consumption therefore always have tobe balanced. Currently, the load curve is viewed as a rigid boundary condition, which must be followed by the generation system. The basic idea of the approach followed here is that weather-dependent generation causes a shift of focus of the electricity supply. At high shares of wind and solar generation, the role of the rigid boundary condition falls to the residual load, that is, the remaining load after subtraction of renewable generation. The goal is to include the weather dependence as well as the load curve in the design of the future electricity supply.
After a brief introduction, the present work first turns to the underlying weather-, generation and load data, which form the starting point of the analysis. In addition, some basic concepts of energy economics are discussed, which are needed in the following.
In the main part of the thesis, several algorithms are developed to determine the load flow in a network with a high share of wind and solar energy and to determine the backup supply needed at the same time. Minimization of the energy needed from controllable power plants, the capacity variable power plants, and the capacity of storing serve as guiding principles. In addition, the optimization problem of grid extensions is considered. It is shown that it can be formulated as a convex optimization problem. It turns out that with an optimized, international transmission network which is about four times the currently available transmission capacity, much of the potential savings in backup energy (about 40%) in Europe can be reached. In contrast, a twelvefold increase the transmission capacity would be necessary for a complete implementation of all possible savings in dispatchable power plants.
The reduction of the dispatchable generation capacity and storage capacity, however, presents a greater challenge. Due to correlations in the generation of time series of individual countries, it may be reduced only with difficulty, and by only about 30%.
In the following, the influence of the relative share of wind and solar energy is illuminated and examined the interplay with the line capacitance. A stronger transmission network tends to lead to a higher proportion of wind energy being better integrated. With increasing line capacity, the optimal mix in Europe therefore shifts from about 70% to 80% wind. Similar analyses are carried out for the US with comparable results.
In addition, the cost of the overall system can be reduced. It is interesting at this point that the advantages for the network integration may outweigh higher production costs of individual technologies, so that it is more favourable from the viewpoint of the entire system to use the more expensive technologies.
Finally, attention is given to the flexibility of the dispatchable power plants. Starting from a Fourier-like decomposition of the load curve as it was a few years ago, when hardly renewable generation capacity was present, capacities of different flexibility classes of dispatchable power plant are calculated. For this purpose, it is assumed that the power plant park is able to follow the load curve without significant surplusses or deficits. From this examination, it is derived what capacity must at least be available without having to resort to a detailed database of existing power plants.
Assuming a strong European cooperation, with a stronger international transmission network, the dispatchable power capacity can be significantly reduced while maintaining security of supply and generating relatively small surplusses in dispatchable power plants.
The subject of this thesis is the experimental investigation of the neutron-capture cross sections of the neutron-rich, short-lived boron isotopes 13B and 14B, as they are thought to influence the rapid neutron-capture process (r process) nucleosynthesis in a neutrino-driven wind scenario.
The 13;14B(n,g)14;15B reactions were studied in inverse kinematics via Coulomb dissociation at the LAND/R3B setup (Reactions with Relativistic Radioactive Beams). A radioactive beam of 14;15B was produced via in-flight fragmentation and directed onto a lead-target at about 500 AMeV. The neutron breakup of the projectile within the electromagnetic field of the target nucleus was investigated in a kinematically complete measurement. All outgoing reaction products were detected and analyzed in order to reconstruct the excitation energy.
The differential Coulomb dissociation cross sections as a function of the excitation energy were obtained and first experimental constraints on the photoabsorption and the neutron-capture cross sections were deduced. The results were compared to theoretical approximations of the cross sections in question. The Coulomb dissociation cross section of 15B into 14B(g.s.) + n was determined to be s(15B;14B(g:s:)+n) CD = 81(8stat)(10syst) mb ; while the Coulomb dissociation cross section of 14B into a neutron and 13B in its ground state was found to be s(14B;13B(g:s:)+n) CD = 281(25stat)(43syst) mb: Furthermore, new information on the nuclear structure of 14B were achieved, as the spectral shape of the differential Coulomb dissociation cross section indicates a halolike structure of the nucleus.
Additionally, the Coulomb dissociation of 11Be was investigated and compared to previous measurements in order to verify the present analysis. The corresponding Coulomb dissociation cross section of 11Be into 10Be(g.s.) + n was found to be 450(40stat)(54syst ) mb, which is in good agreement with the results of Palit et al.
This thesis is structured into 7 chapters:
• Chapter 2 gives an overview of the ultrashort high intensity laser interaction with matter. The laser interaction with an induced plasma is described, starting from the kinematics of single electron motion, followed by collective electron effects and the ponderamotive motion in the laser focus and the plasma transparency for the laser beam. The three different mechanisms prepared to accelerate and propagate electrons through matter are discussed. The following indirect acceleration of protons is explained by the Target Normal Sheath Acceleration (TNSA) mechanism. Finally some possible applications of laser accelerated protons are explained briefly.
• Chapter 3 deals with the modeling of geometry and field mapping of magnetic lens. Initial proton and electron distributions, fitted to PHELIX measured data are generated, a brief description of employed codes and used techniques in simulation is given, and the aberrations at the solenoid focal spot is studied.
• Chapter 4 presents a simulation study for suggested corrections to optimize the proton beam as a later beam source. Two tools have been employed in these suggested corrections, an aperture placed at the solenoid focal spot as energy selection tool, and a scattering foil placed in the proton beam to smooth the radial energy beam profile correlation at the focal spot due to chromatic aberrations. Another suggested correction has been investigated, to optimize the beam radius at the focal spot by lens geometry controlling.
• Chapter 5 presents a simulation study for the de-neutralization problem in TNSA caused by the fringing fields of pulsed magnetic solenoid and quadrupole. In this simulation, we followed an electrostatic model, wherethe evolution of both, self and mutual fields through the pulsed magnetic solenoid could be found, which is not the case in the quadrupole and only the growth of self fields could be found. The field mapping of magnetic elements is generated by the Matlab program, while the TraceWin code is employed to study the tracking through magnetic elements.
• Chapter 6 describes the PHELIX laser parameters at GSI with chirp pulse amplification technique (CPA), and Gafchromic Radiochromic film RCF) as a spatial energy resolver film detector. The results of experiments with laser proton acceleration, which were performed in two experimental areas at GSI (Z6 area and PHELIX Laser Hall (PLH)), are presented in section 6.3.
• Chapter 7 includes the main results of this work, conclusions and gives a perspective for future experimental activities.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.