Refine
Year of publication
- 2018 (21) (remove)
Document Type
- Doctoral Thesis (21) (remove)
Has Fulltext
- yes (21)
Is part of the Bibliography
- no (21)
Keywords
- Czochralski method (1)
- Injektionssystem (1)
- Inverse Kinematics (1)
- Physics (1)
- Rydberg (1)
- Slavkovska (1)
- Speicherring (1)
- Storage Ring (1)
- Strahltransport (1)
- Toroidales Magnetfeld (1)
Institute
- Physik (21) (remove)
The production cross section and the transverse momentum distribution of charged particles is measured in pp collisions at √s = 2.76 TeV, 5.02 TeV, 7 TeV and 13 TeV, as well as for Pb-Pb collision at √s_NN = 5.02 TeV and Xe-Xe at √s_NN = 5.44 TeV in ALICE at the LHC. The measurement is performed in the transverse momentum region of 0.15 < p_T < 50 GeV/c and in the pseudorapidity range of |η| < 0.8. The precision of the measurement has been substantially enhanced as a result of the improved corrections, by taking into account a more realistic particle composition in the MC simulations. As a result, the systematic uncertainties have been reduced by more than a factor two in all systems and energies.
The average transverse momentum <p_T> results show a faster-than-linear increase with the center-of-mass energy and follow a similar trend with respect to previous measurements. The analysis of the p_T spectra in multiplicity intervals show a weak center-of-mass energy dependence when they are compared to their respective inelastic (INEL) pp measurement. The average multiplicity as a function of the collision energy shows a quadratic trend, and the comparison with other ALICE multiplicity measurements exhibits a remarkable agreement, within uncertainties.
The transverse momentum spectra in pp collisions are compared to state-of-the-art MC simulations, EPOS LHC and PYTHIA 8 event generators; none of them is able to reproduce the distributions over the full p_T range.
The differential cross section in pp collisions is an essential observable for the study of the Quark Gluon Plasma (QGP) created in ultra-relativistic heavy-ion collisions. The absence of a medium formation in pp collisions serves as an essential baseline for studies of particle production and suppression due to parton energy-loss in the QGP. Since pp collisions at √s = 5.44 TeV were not measured by ALICE, the pp reference at this energy was constructed by using a power law interpolation between the s = 5.02 TeV and 7 TeV data. The pp results are compared to the particle production in Pb-Pb collisions at √s_NN = 5.02 TeV and Xe-Xe collisions at √s_NN = 5.44 TeV.
The nuclear modification factor R_AA for Pb-Pb and Xe-Xe collisions was calculated and a strong suppression of high-p_T particles is observed in central collisions. The R AA in different systems allows for a differential study of the parton energy loss in the QGP. The comparison of the R AA in multiplicity intervals between the two systems provide insights into the path length dependence of a parton that propagates in the medium.
Die Bestrahlung atmungsbewegter Tumoren stellt eine Herausforderung für die moderne Strahlentherapie dar. In der vorliegenden Arbeit werden zu Beginn die physikalischen, technischen und medizinischen Grundlagen vorgestellt, um dem Leser den Einstieg in die komplexe Thematik zu erleichtern. Des Weiteren werden verschiedene Techniken zur Bestrahlung atmungsbewegter Zielvolumina vorgestellt. Auch wird auf die Sicherheitssäume eingegangen, die notwendig sind, um Fehler in der Bestrahlungskette beim Festlegen des Planungszielvolumens für die Bestrahlung auszugleichen.
Im Rahmen dieser Arbeit wurde ein Konzept entwickelt, wodurch sich der Sicherheitssaum von bewegten Tumoren in der Radiochirurgie mit dem Tumor-Tracking-System des Cyberknifes noch weiter verkleinern lässt. Somit kann die sogenannte therapeutische Breite der Behandlung weiter vergrößert werden kann. Dafür wurden ein 4D-CT und ein Gating-System in den klinischen Betrieb aufgenommen. Die entwickelte Technik basiert auf den zehn individuellen Atemphasen des 4D-CTs und lässt eine Berücksichtigung bewegter Risikostrukturen bereits während der Bestrahlungsplanung zu. Diese Methode wurde mit aktuellen Bestrahlungstechniken mittels eines Vergleichs der Bestrahlungspläne anhand von zehn Patientenfällen verglichen. Zur Erstellung der Bestrahlungspläne kamen die Bestrahlungsplanungssysteme von Varian (Eclipse 13.5) und Accuray (Multiplan 4.6) zum Einsatz. Es wurden insbesondere die Bestrahlungsdosen an den Risikoorganen und die Volumina ausgewählter Isodosen betrachtet. Hier zeigte sich eine klare Abhängigkeit von der Belastung des gesunden Gewebes von der verwendeten Bestrahlungstechnik. Dies lässt die Schlussfolgerung zu, dass mit einer Reduzierung des Sicherheitssaums, welcher abhängig von der verwendeten Planungs- und Bestrahlungstechnik ist, eine Vergrößerung der therapeutischen Breite einhergeht. Zusätzlich bleibt bei einer geringen Belastung des umliegenden gesunden Gewebes die Möglichkeit für eine weitere Bestrahlung offen.
Anschließend wurden anhand von berechneten Testplänen Messungen an einem für diese Arbeit modifizierten Messphantom am Varian Clinac DHX und am Cyberknife VSI durchgeführt. Hier wurden die beim Planvergleich verwendeten Bestrahlungstechniken verwendet, um einen Abgleich von berechneter und tatsächlich applizierter Dosis zu erhalten. Das verwendete Messphantom simuliert die Atmung des Patienten und lässt gleichzeitig eine Verifikation der Dosisverteilung mit EBT3-Filmen sowie Messungen mit Ionisationskammern zu. Es zeigte sich, dass für die Techniken, welche aktiv die Atmung berücksichtigen (Synchrony am Cyberknife und Gating am Varian Clinac), selbst im Niedrigdosisbereich eine gute Übereinstimmung zwischen Messung und Berechnung der Dosisverteilung vorliegt. Sobald die Bewegung des Zielvolumens bereits bei der Bestrahlungsplanung berücksichtigt wird, steigt die Übereinstimmung weiter an. Für Techniken, welche die Atmung lediglich bei der Zielvolumen-Definition einbeziehen (ITV-Konzept), liegen sowohl die mit Ionisationskammern gemessenen Werte als auch die Übereinstimmung von berechneter und gemessener Dosisverteilung außerhalb des Toleranzbereichs.
Eine weitere Frage dieser Arbeit befasst sich mit der Treffsicherheit des Tumor-Tracking-Systems des Cyberknifes (Synchrony). Hier wurden Messungen mit dem XSightLung-Phantom und unterschiedlichen Sicherheitssäumen, welche die Bewegung des Tumors ausgleichen sollen, durchgeführt. Dies geschah sowohl mit dem für das Phantom vorgesehenen Würfel mit Einschüben für EBT3-Filme als auch mit einem Film-Sanchwich aus Flab-Material zur Untersuchung einer dreidimensionalen Dosisverteilung. Die Analyse der Filme ergab, dass es zumindest an einem Phantom mit einer einfachen kraniokaudalen Bewegung nicht nötig ist, die Bewegung des Zielvolumens durch einen asymmetrischen Sicherheitssaum in Bewegungsrichtung zu kompensieren um die Abdeckung des Zielvolumens mit der gewünschten Dosis zu gewährleisten.
Durch diese Arbeit konnten zusätzlich weitere wertvolle Erkenntnisse für den klinischen Alltag gewonnen werden: bei der Untersuchung der Bewegung von Tumoren in freier Atmung sowie bei maximaler Inspiration und Exspiration zeigte sich, dass zum Teil die Tumorbewegung in maximalen Atemlagen (3-Phasen-CT) deutlich von der freien Atmung abweicht. Dies lässt den Schluss zu, dass für eine Bestrahlung in freier Atmung ein 4D-CT die Tumorbewegung deutlich realistischer widerspiegelt als ein 3-Phasen-CT, zumal letzteres eine größere Dosisbelastung für den Patienten bedeutet.
Ebenfalls konnte anhand einer retrospektiven Untersuchung von Lungentumoren gezeigt werden, dass für die Berechnung von Bestrahlungsplänen für Tumoren in inhomogenem Gewebe der Ray-Tracing-Algorithmus die Dosis im Zielvolumen teilweise sehr stark überschätzt. Um eine realistische Dosisverteilung zu erhalten, sollte deshalb insbesondere bei Tumoren in der Lunge auf den Monte-Carlo-Algorithmus zurückgegriffen werden.
With the discovery of light beyond human visibility, scientists strove to extend the range of observation to invisible parts of the light’s spectrum. Realising that light of all frequencies is part the same physical phenomenon, brought a leap in understanding about electromagnetic waves. With the development of more advanced technology, detectors with higher sensitivity for adjacent frequencies to the visible were built. From this, with each new observable wavelength, more insight into otherwise invisible processes and phenomenons were observed. Hand in hand with this went the enhancement of the output power of corresponding sources. This has lead to higher sensitivity setups throughout the spectrum, leading to observations which have given a deeper understanding in various fields of science. Nowadays, detectors and emitters in many different regions of the invisible electro magnetic spectrum have found their way in our every day life. Innovations in technology has lead to practical applications such as X-rays in medicine, motion sensors and remote controls using infrared light, distance sensors and data transmission using radar and radio devices. The frequency regions above infrared are optically generated and below radar can be produced using electric methods. There is no straight line that separates these frequencies. There rather is a whole intermediate region known as the terahertz (THz) regime. Due to the lack of sensitive detectors and efficient sources, the THz frequency region has not been exploited for application use on a widespread basis so far. It combines properties from the surrounding frequency ranges which make it an ideal spectrum for various applications. Consequently, THz radiation and THz imaging are active fields of research.
The work presented in this thesis consists of the development and testing of novel THz imaging concepts, which uses a THz antenna coupled field effect transistor (TeraFET) detector. Two detection principles are applied using two different optical setups. The first uses a pulsed optical parametric oscillator (OPO) THz source where the optical output power is detected. The source relies on a nonlinear effect of a lithium niobate crystal to generate tunable THz pulses from a Q-switched pump laser. The THz signal is detected and amplified by a double stage operational amplifier for monitoring the real time 20 ns pulses on an oscilloscope where a signal to noise ratio (SNR) of ⇠ 25 at a frequency range from 0.75 to 1.1 THz is reached. Imaging of the area of interest with a resolution of 1.2 mm is achieved through raster scanning of the THz pulses. Also spectroscopy with a frequency resolution of ⇠ 50 GHz is demonstrated using a para-aminobenzoic acid sample. The second setup utilises two synchronised electronic multiplier chain sources where their output is mixed on the detector. To form a heterodyne detection setup, the intermediate frequency is fed to a lock-in amplifier which then amplifies the so called beat signal from the TeraFET detector. One source is fixed relative to the detector even through scanning to ensure a stable signal. This detection method allows for amplitude and phase detection for every scanning position, making numerical light field propagation and object reconstruction possible. Numerical focussing is a key feature achieving a lateral resolution of the input transmittance of ⇡ 2 mm.
After the introduction, the second chapter describes the setup, measurement results and challenges which arise using a TeraFET together with the pulsed THz source “Firefly-THz”. In the description of the setup, special attention is given to the shielding of the detector and the electronics. General findings discuss first the overall performance and later spectroscopy and imaging as application examples. Another subsection continues with potential noise sources before the chapter is concluded. Chapter three expands on the topic of Fourier optics from a theoretical point of view. First, parts of the theory of the Fourier Transform (FT) are set out for the reader and how the Fast Fourier Transform (FFT) results from the Discrete Fourier Transform (DFT). This approach is used for theoretical considerations and the implementation of a Fourier optic script that allows for numerical investigations on electro magnetic field propagation through an optical system. The boundary conditions are chosen to be practical relevant to make predictions on measurements presented in chapter four. The following fourth chapter describes the realisation of a heterodyne THz detection setup. Before the measurement results are presented, the setup and its electric configuration are shown. The results come close to the analytical predictions so that the same algorithm which propagates the field from an object to the Fourier plane is used to propagate the measured field back to the object. The influence of phase noise on the measurement results are discussed before simulation and measurement is compared. The last chapter in this thesis concludes on the findings in the pulsed THz detection and the heterodyne THz Fourier imaging and gives an outlook for both configurations.
Die vorliegende Dissertation befasst sich mit der Entwicklung und Erforschung eines konzeptionell neuartigen Injektionssystems zum Transport von Ionenstrahlen in toroidale Magnetfeldstrukturen. Die Forschungsarbeit ist dabei Teil des Figure-8 Speicherringprojekts (F8SR) des IAP, bei welchem es um die Erforschung der Physik und die Entwicklung eines niederenergetischen, supraleitenden, magnetostatischen Figure-8 Hochstromspeicherrings geht. Dieser neuartige Speicherring ermöglicht aufgrund des Einsatzes von fokussierenden solenoidalen und toroidalen Magnetfeldern das Speichern von Strahlströmen von bis zu einigen Ampere. Diese Arbeit baut auf früheren Forschungsarbeiten zu diesem Themenfeld auf, in welchen die Grundlagen und Ausgangsparameter für die experimentelle Untersuchung der Injektion gelegt und mit dem Aufbau des Injektionsexperiments begonnen wurde.
In dieser Dissertation wird den Fragen nachgegangen, ob ein magnetisches Konzept des Injektionssystems mittels eines „Scaled-Down“-Experiments experimentell umsetzbar ist und ob mit diesem die Injektion von Ionenstrahlen in toroidale Magnetfeldstrukturen realisiert werden kann. Ziel ist es dabei, ein Injektionssystem aufzubauen, durch welches sowohl ein seitlich injizierter Injektionsstrahl, welcher den in den Speicherring zu injizierenden Strahl darstellt, als auch ein gleichzeitig durch die toroidalen Magnetfelder driftender Ringstrahl, welcher den im Speicherring zirkulierenden Strahl darstellt, ohne Verluste transportiert werden können. Das Injektionssystem besteht dabei aus drei normalleitenden Magneten, wobei es sich um zwei baugleiche 30 Grad Toroide sowie einen Solenoid handelt. Die Toroide bilden den Transportkanal für den Ringstrahl, während der Injektionssolenoid senkrecht zwischen den beiden Toroiden endet und den Injektionskanal für den Injektionsstrahl darstellt.
Zunächst wurde das Injektionssystem mittels Strahltransportsimulationen untersucht und aufbauend auf den Ergebnissen die benötigen Vakuumkomponenten sowie der Injektionsmagnet ausgelegt, entwickelt und umgesetzt. Anschließend wurde mit dem fertigstellten Injektionsexperiment der Transport von zwei Ionenstrahlen durch das Injektionssystem experimentell erforscht. Dabei wurden die Strahlpfade mit einem in Entwicklung befindlichen Kameradetektorsystem aus verschiedenen Perspektiven aufgenommen und das Strahlverhalten in Abhängigkeit von unterschiedlichen Parametern phänomenologisch analysiert und diskutiert, mit den Ergebnissen der Simulationen verglichen sowie theoretisch bzgl. der RxB Drift und eines Gedankenmodells eingeordnet. Die technische Umsetzung, Inbetriebnahme und Durchführung verschiedener Vorabexperimente bzgl. weiterer Komponenten des Injektionsexperiments (bspw. Ionenquellen und Filterkanäle) ist ebenfalls Bestandteil dieser Arbeit.
Bei den experimentellen Untersuchungen mit Wasserstoff- und Heliumionenstrahlen konnte beobachtet werden, wie der Injektionsstrahl in den zweiten Toroid driftet und somit erfolgreich injiziert wird. Des Weiteren wurde eine Heliummessung durchgeführt, bei der sowohl der Injektionsstrahl als auch der Ringstrahl erfolgreich durch das Injektionssystem transportiert werden konnten. Auch die Auswirkungen des Injektionsmagneten auf den Ringstrahl konnten experimentell untersucht werden. Die verschiedenen Messungen wurden mittels des Gedankenmodells diskutiert und mit den Ergebnissen der Simulationen sowie untereinander verglichen.
Das abschließende Ergebnis dieser Arbeit ist, dass durch den Einsatz von solenoidalen und toroidalen Magnetfeldern der Injektionsstrahl vom Injektionsmagneten in den zweiten Toroid transportiert und dieser somit in die gekoppelte magnetische Konfiguration der Toroide eingelenkt werden kann. Der gleichzeitige verlustfreie Transport eines Ringstahls durch das Injektionssystem konnte dabei ebenfalls realisiert werden. Des Weiteren stimmen die Ergebnisse der Simulationen und Experimente sowie die theoretischen Überlegungen überein.
Das neuartige Injektionskonzept, welches als Schlüsselkomponente für die Umsetzung des Figure-8 Hochstromspeicherrings benötigt wird, wurde somit mittels Theorie, Simulation und Experiment überprüft und die Funktionalität bestätigt.
Zukünftige Forschungsfragen für welche der Figure-8 Hochstromspeicherring verwendet werden könnte, bspw. aus den Bereichen der experimentellen Astrophysik oder Fusionsforschung, wurden abschließend diskutiert.
Defossiliation of the energy system is crucial in the face of the impending risks of climate change. Electricity generation by burning fossil fuels is being displaced by renewable energy sources like hydro, wind and solar, driven by support schemes and falling costs from technological advances as well as manufacturing scale effects. The unavoidable shift from flexibly dispatchable generation to weather-dependent spatio-temporally varying generators transforms the generation and distribution of electricity into highly interdependent complex systems in multiple dimensions and disciplines:
In time, different scales, stretching from intra-day, diurnal, synoptic to seasonal oscillations of the weather interact with years and decades of planning and construction of capacity. In space, long-range correlations and local variations of weather systems as well as local bottlenecks in transmission networks affect solutions. The investment decisions about technological mix and spatial distribution of capacity follow economic principles, within restrictions which adapt in social feedback loops to public opinion and lobbyist influences.
In this work, a family of self-consistent models is developed which map physical steady-state operation, capacity investments and exogeneous restrictions of a European electricity system, in higher simultaneous spatial and temporal detail as well as scope than has previously been computationally tractable. Increasing the spatial detail of the renewable resources and co-optimizing the expansion of only a few transmission lines, reveals solutions to serve the European electricity demand at about today’s electricity cost with only 5% of its carbon-dioxide emissions; and importantly their electricity mix differs from the findings at low spatial resolution.
As important intermediate steps,
• new algorithms for the convex optimization of electricity system infrastructure are derived from graph-theoretic decompositions of network flows. Only these enable the investigation of model detail beyond previous computational limitations.
• a comprehensive European electricity network model down to individual substations at the transmission voltage levels is built by combining and completing data from freely available sources.
• a network reduction technique is developed to approximate the detailed model at a sequence of spatial resolutions to investigate the role of spatial scale, and identify a level of spatial resolution which captures all relevant detail, but is still computationally tractable.
• a method to trace the flow of power through the network, which is related to a vector diffusion process on a directed flow graph embedded in a network, is used to analyse the resulting technology mix and its interactions with the power network
The open-source nature of the model and restriction to freely available data encourages an accessible and transparent discussion about the future European electricity system, primarily based on renewable wind and solar resources.
In the course of this thesis we discuss a certain kind of supersolid, the lattice-supersolid, which can be realized using quantum gases in an optical lattice trap. The lattice-supersolid, which simultaneously possesses off-diagonal and diagonal long-range order in its density matrix and also breaks the discrete translational symmetry of an underlying lattice, is induced by self-ordering of the gas due to strong long-range van der Waals interactions. In the considered scenario, the interactions are facilitated by the excitation of atomic Rydberg states, which exhibit enhanced van der Waals forces.
In the first part of this thesis (chapters 1-3), we review the relevant basics of quantum gases, Rydberg physics and introduce the extended Bose-Hubbard model. We start with the relevant methods and devices of the vast toolbox available in common quantum gas experiments, as well as consider the main concepts behind superfluidity and supersolidity. This is followed by an introduction of some basic concepts of Rydberg atoms in quantum many-body systems, with a focus on the facilitation of long-range interactions and the implementation in a theoretical model. Thereafter a brief introduction is given, on the realization of the Bose-Hubbard model in optical lattice systems and its extension to include Rydberg states, which concludes the introductory part of this thesis.
In the following part (chapters 4-6), we introduce the theoretical tools used to derive the results presented in the final part. First, an introduction to a real-space extension of bosonic dynamical mean-field theory (RB-DMFT) for bosonic systems with long-range interactions in the Hartree approximation is given. This method is based on the non-perturbative self-consistent evaluation of the lattice Green’s function, which also incorporates the effect of nearest neighbor correlations due to the non-condensed particles. Then we focus on a quasiparticle expansion of the Bose-Hubbard model, which has its foundation in linearized fluctuations of a static mean-field ground-state, allowing for the prediction of a vast range of experimentally relevant observables. Lastly, we introduce an efficient truncation scheme for the local bosonic Fock-basis, which allows for the simulation of phases with high condensate density at a vastly reduced computational effort.
In the final part (chapters 7 and 8), we discuss the application of both methods to itinerant bosonic gases in two-dimensional optical lattices, in order to predict the equilibrium ground-state phases, as well as the signatures of supersolidity and its formation in spectral functions and the dynamic and static structure factor. Specifically, we focus on two limiting cases. Firstly, we consider a two-component gas, as realized by two hyperfine ground states, for example, of rubidium-87, where one component is off-resonantly excited to a Rydberg state, which generates a soft-core shaped interaction potential. Secondly, we discuss the opposing limit, using near-resonant excitations
of Rydberg states, where the interacting component now directly corresponds to the Rydberg state, which interacts via a van der Waals potential. In both cases we discuss the rich variety of supersolid phases, which are found for a wide range of parameters. We also discuss how some of these phases can be realized in experiment.
In the subsequent appendices (A to D) we discuss some methodological details. Most notably, we consider the possible Fock-extension of the Hartree approximation (appendix A), introduced in the RB-DMFT treatment of the extended Bose-Hubbard model.
This thesis presents the first measurement of the proton capture reaction on the isotope 124Xe performed in inverse kinematics. The experiment was carried out in June 2016 at the Experimental Storage Ring (ESR) at the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany.
124Xe is one of about 35 p-nuclei that cannot be produced via neutron-induced nucleo- synthesis as the vast majority of heavy elements. Its production and destruction provide important information about the nucleosynthesis of the p-nuclei. Measuring the 124Xe(p,g)125Cs reaction also gives strong constraints for its reverse 125Cs(g,p)124Xe reaction.
Fully stripped 124Xe ions repeatedly passed a H2 gas jet target at five different energies between 5.5 MeV/u and 8 MeV/u. An electron cooler compensated for the energy loss in the target and reduced the beam momentum spread. The reaction product 125Cs55+ has a smaller magnetic rigidity than 124Xe54+. Therefore 125Cs55+ was deflected towards smaller radii in the first dipole after the target area and thereby separated from 124Xe54+. It was detected with a position-sensitive Double-Sided Silicon Strip Detector (DSSSD). The novelty of this experiment was the installation of the DSSSD inside the ultra-high vacuum of the storage ring using a newly designed manipulator.
Three High-Purity Germanium X-ray detectors were used to measure the X-rays following the Radiative Electron Capture (REC) events into 124Xe53+. The REC cross sections are well-known and were used to determine the luminosity.
The 124Xe(p,g)125Cs cross sections at ion beam energies between 5.5 MeV/u and 8 MeV/u were determined relatively to the K-REC cross sections and finally compared to the theoretically predicted cross sections. While theoretical predictions of the TENDL database are lower than the measured ones by a factor of up to seven, the NON-SMOKER data are higher by a factor of up to two, except of the cross section at 7 MeV/u, where NON-SMOKER data are slightly lower than the experimental value.
For the first time, a proton capture cross section could be measured in inverse kinematics close to the astrophysically relevant Gamow window. This allows the direct determination of the (p,g) cross section of isotopes with half-lives down to several minutes, which is not possible with any other technique.
In this thesis we work on the theoretical description of relativistic heavy-ion collisions, focussing on electromagnetic probes. We present mainly four topics: electric conductivity and diffusion properties of the hot plasma and hadronic matter, response of the quark-gluon plasma to external magnetic fields, direct photon production in the quark-gluon plasma and a study about initial and final state effects in small systems. The latter topic aims, i.a., at a better understanding of the initial state, which is crucial for electromagnetic probes. In all research areas we make use of the Boltzmann transport equation, whereby the presented methods provide analytical and numerical solutions. We pay particular attention to the construction of complete leading order photon production processes in numerical transport simulations of the quark-gluon plasma.
To begin with, our findings are the complete conserved charge diffusion matrix and electric conductivity. Those properties are important ingredients, e.g., for future simulations of baryon rich collisions. Next, we find that the influence of external magnetic fields to the QGP dynamics is not quantifiable in observables.
We present results for a variety of direct photon observables and we can partly explain experimental data. We emphasize the importance of the chemical composition and non-equilibrium nature of the medium to the direct photon puzzle. Lastly, we observe the interesting dynamic behavior of azimuthal correlations in small systems and identify signatures of the initial state in final observables. This will also be of interest for more precise simulations of electromagnetic probes and allows for various future studies.
Die vorliegende Arbeit präsentiert die wissenschaftlichen Erkenntnisse, welche im Rahmen dreier verschiedener Messreihen gewonnen wurden. Kernthema ist in allen Fällen die Ionisation von molekularem Wasserstoff mit Photonen.
Im Rahmen der Messung sollte eine 2014 veröffentlichte Vorhersage der theoretischen Physiker Vladislav V. Serov und Anatoli S. Kheifets im Experiment überprüft werden. Ihren Berechnungen zufolge kann ein sich langsam vom Wasserstoff Molekülion entfernendes Photoelektron durch sein elektrisches Feld das Mutterion polarisieren und dafür sorgen, dass beim anschließenden Aufbruch in ein Proton und ein Wasserstoffatom eine asymmetrische Emissionswinkelverteilung zu beobachten ist [SK14]. Diese Vorhersage konnte mit den Ergebnissen der hier vorgestellten Messung zweifelsfrei untermauert werden. Für drei verschiedene Photonenenergien, welche im relevanten Reaktionskanal Photoelektronenenergien von 1, 2 und 3 eV entsprechen, wurden die prognostizierten Symmetrien in den Messdaten herauspräpariert. Es zeigte sich, dass diese sowohl in qualitativer wie auch in quantitativer Hinsicht gut bis sehr gut mit den Vorhersagen übereinstimmen.
Im zweiten Teil dieser Arbeit wurde erneut die Dissoziationsreaktion, allerdings bei deutlich höheren Photonenenergien, untersucht. Ziel war es, den in Zusammenarbeit mit den Physikern um Fernando Martin gelungenen theoretischen Nachweis der Möglichkeit einer direkten Abbildung von elektronischen Wellenfunktionen auch im Experiment zu vollziehen. Der überwiegende Teil aller Veröffentlichungen im Vorfeld dieser Messung fokussierte sich bei den Untersuchungen der Wellenfunktion entweder auf die rein elektronischen Korrelationen - so zum Beispiel in Experimenten zur Ein-Photon-Doppelionisation, wo Korrelationen zwischen beiden beteiligten Elektronen den Prozess überhaupt erst möglich machen - oder aber auf den Einfluss, welchen das Molekülpotential auf das emittierte Elektron ausübt. Die wenigen Arbeiten, die sich bis heute an einer unmittelbaren Abbildung elektronischer Wellenfunktionen versuchten, gingen meist den im Vergleich zu dieser Arbeit umgekehrten Weg: Man untersuchte hier das Licht höherer Harmonischer, wie sie bei der lasergetriebenen Ionisation und anschließenden Rekombination eines Photoelektrons mit seinem Mutterion entstehen.
In dieser Arbeit wurde ein Ansatz präsentiert, der zwei überaus gängige und verbreitete Messtechniken geschickt kombiniert - Während das Photoelektron direkt nachgewiesen und seine wesentlichen Eigenschaften abgefragt werden, kann der quantenmechanische Zustand des zweiten, gebunden verbleibenden Elektrons über einen koinzident dazu geführten Nachweis des ionischen Reaktionsfragments bestimmt werden. Dieser Vorgang stützt sich wesentlich auf Berechnungen der Gruppe um Fernando Martín, welche eine Quantifizierung der Beiträge einzelner Zustande zum gesamten Wechselwirkungsquerschnitt dieser Reaktion erlauben. Diese unterscheiden sich je nach Energie der Fragmente signifikant, so dass über eine Selektion des untersuchten KER-Intervalls Kenntnis vom elektronischen Zustand des H2 +-Ions nach der Photoemission erlangt werden kann. Die experimentellen Daten unterstützen die Theorie von Martin et al. nicht nur mit verblüffend guter Übereinstimmung, die gemessenen Emissionswinkelverteilungen stehen darüber hinaus auch in sehr gutem Einklang mit ihren theoretisch berechneten Gegenstücken. Die Ergebnisse wurden zwischenzeitlich in der renommierten Fachzeitschrift Nature Communications veröffentlicht [WBM+17].
Die dritte Messreihe innerhalb dieser Arbeit beschäftigt sich mit der Photodoppelionisation von Wasserstoff. Im Rahmen des selben Experiments wie die weiter vorn beschriebene Dissoziationsmessung bei 400 eV Photonenenergie aufgenommen, belegen die Ergebnisse auf wunderbar anschauliche Art und Weise, dass die Natur in unserer Umgebung voller Prozesse ist, die ursprünglich als rein quantenmechanische Laborkonstrukte angesehen wurden. Es konnte zweifelsfrei gezeigt werden, dass die beiden Elektronen, die bei der Photodoppelionisation freigesetzt werden, als ein Quasiteilchen aufgefasst werden können. Sie befinden sich in einem verschränkten Zweiteilchenzustand, und nur eine koinzidente Messung beider Elektronen vermag es, Interferenzeffekte in ihren Impulsverteilungen sichtbar zu machen - betrachtet man beide hingegen individuell, so treten keinerlei derartige Phänomene auf. Es gelang dabei zudem, eine beispielhafte Übereinstimmung zwischen den gemessenen Daten und einer theoretischen Berechnung der Kollegen um Fernando Martín zu erreichen.