Institutes
Refine
Year of publication
- 2021 (24) (remove)
Document Type
- Doctoral Thesis (24) (remove)
Has Fulltext
- yes (24)
Is part of the Bibliography
- no (24)
Keywords
- 2D materials (1)
- ALICE upgrade (1)
- Astrophysics (1)
- Bohmian mechanics (1)
- CBM Experiment (1)
- Color superconductivity (1)
- Control System (1)
- EPICS (1)
- FEBID (1)
- Gravitational Waves (1)
Institute
- Physik (24)
Die vorliegende Dissertation behandelt das Thema der Wechselstromleitfähigkeit nano-granularer Metalle, welche mit Hilfe der fokussierten elektronenstrahlinduzierten Direktabscheidung (FEBID) hergestellt wurden, sowie der dielektrischen Relaxation in metall-organischen Gerüstverbindungen (MOFs). Sie war eingebettet in das interdisziplinäre Projekt „Dielectric and Ferroelectric Surface-Mounted Metal-Organic Frameworks (SURMOFs) as Sensor Devices“ im Rahmen des DPG-Schwerpunktsprogramms „Coordination Networks: Building Blocks for Functional Systems“ (SPP 1928, COORNETs). Dabei verfolgt sie ein Sensorkonzept zur selektiven Detektion von Analytgasen. Der zentrale Erfolg der Arbeit besteht dabei in neuen Erkenntnissen über die Wechselstromleitfähigkeit nano-granularer Pt(C)-FEBID-Deponate. Die hierbei gewonnen Erkenntnisse können in Zukunft einen weiteren Baustein in der theoretischen Beschreibung dieses grundlegend interessanten und für sensorische Anwendungen wichtigen Teilgebiets der Festkörperphysik darstellen.
Topological phases set themselves apart from other phases since they cannot be understood in terms of the usual Landau theory of phase transitions. This fact, which is a consequence of the property that topological phase transitions can occur without breaking symmetries, is reflected in the complicated form of topological order parameters. While the mathematical classification of phases through homotopy theory is known, an intuition for the relation between phase transitions and changes to the physical system is largely inhibited by the general complexity.
In this thesis we aim to get back some of this intuition by studying the properties of the Chern number (a topological order parameter) in two scenarios. First, we investigate the effect of electronic correlations on topological phases in the Green's function formalism. By developing a statistical method that averages over all possible solutions of the manybody problem, we extract general statements about the shape of the phase diagram and investigate the stability of topological phases with respect to interactions. In addition, we find that in many topological models the local approximation, which is part of many standard methods for solving the manybody lattice model, is able to produce qualitatively correct phase transitions at low to intermediate correlations.
We then extend the statistical method to study the effect of the lattice, where we evaluate possible applications of standard machine learning techniques against our information theoretical approach. We define a measure for the information about particular topological phases encoded in individual lattice parameters, which allows us to construct a qualitative phase diagram that gives a more intuitive understanding of the topological phase.
Finally, we discuss possible applications of our method that could facilitate the discovery of new materials with topological properties.
Ziel dieser Dissertation ist es, die Gleichgewichts- und Nichtgleichgewichts-Eigenschaften des stark wechselwirkenden QGP-Mediums nahe dem Phasenübergang unter extremen Bedingungen von hohen T und hohen Baryonendichten mit Hilfe der kinetischen Theorie im Rahmen von effektiven Modellen zu untersuchen. Wir werden zunächst die thermodynamischen und Transporteigenschaften des QGPs in der Nähe des Gleichgewichts auf der Basis des DQPM im Bereich moderater chemischer Baryonenpotentiale μB ≥ 0.5 GeV untersuchen. Insbesondere werden die EoS und die Schallgeschwindigkeit sowie die Transportkoeffizienten des QGP auf der Grundlage des DQPM bei endlichen T und μB berechnet. Transportkoeffizienten sind besonders interessant, da sie Informationen über die Wechselwirkungen im Medium erlauben, das im Gleichgewicht durch eine Temperatur T und ein chemisches Potential μB charakterisiert werden kann. Unter Berücksichtigung der Transportkoeffizienten und der EoS der QGP-Phase vergleichen wir unsere Ergebnisse mit verschiedenen Resultaten aus der Literatur, in denen Transportkoeffizienten des QGPs auf Basis von effektiven Modellen vorwiegend bei Null oder kleinem chemischen Potentialen untersucht wurden.
Darüber hinaus werden in Kapitel 3 die Gleichgewichtseigenschaften des QGPs und insbesondere die Auswirkungen der μB-Abhängigkeit der thermodynamischen und Transporteigenschaften des QGPs im Rahmen des erweiterten PHSD-Transportansatzes untersucht, der die vollständige Entwicklung des Systems einschließlich der partonischen Phase umfasst. Die Entwicklung des PHSD-Transportansatzes wird in der partonischen Phase erweitert, indem explizit die gesamt- und differentiellen partonischen Streuquerschnitte auf der Grundlage des DQPM berechnet und bei der tatsächlichen Temperatur T und dem baryonischen chemischen Potential μB in jeder einzelnen Raum-Zeit-Zelle, in der die partonische Streuung stattfindet, ausgewertet werden.
Um die Spuren der μB-Abhängigkeit des QGPs in den Observablen zu untersuchen, werden die Ergebnisse von PHSD5.0 (mit μB-Abhängigkeiten) mit den Ergebnissen von PHSD5.0 für μB = 0 sowie mit PHSD4.0, in dem die Massen/Breiten der Quarks und Gluonen sowie deren Wechselwirkungsquerschnitte nur von T abhängen, verglichen. Wir diskutieren die PHSD-Ergebnisse für verschiedene Observablen: (i) Rapiditäts- und pT -Verteilungen von identifizierten Hadronen für symmetrische Au+Au- und Pb+Pb- Kollisionen bei Energien von 30 AGeV (zukünftige NICA-Energie) sowie für die RHIC-Spitzenenergie von √sNN = 200 GeV; (ii) gerichteter Fluss v1 von identifizierten Hadronen für Au + Au bei invarianter Energie √sNN = 27 GeV und 200 GeV; (iii) elliptischer Fluss v2 der identifizierten Hadronen für Au+Au bei invarianten Energien √sNN = 27 und 200 GeV. Der Vergleich der "Bulk"-Observablen für Au+Au-Kollisionen innerhalb der drei PHSD-Einstellungen hat gezeigt, dass sie eine recht geringe Empfindlichkeit gegenüber den μB -Abhängigkeiten der Partoneigenschaften (Massen und Breiten) und ihrer Wechselwirkungsquerschnitte aufweisen, sodass die Ergebnisse von PHSD5.0 mit und ohne μB sehr nahe beieinander liegen. Nur im Fall von Kaonen, Antiprotonen ̄p und Antihyperonen ̄Λ + ̄Σ0 konnte ein kleiner Unterschied zwischen PHSD4.0 und PHSD5.0 bei den höchsten SPS- und RHIC-Energien festgestellt werden.
Wir finden nur geringe Unterschiede zwischen den Ergebnissen von PHSD4.0 und PHSD5.0 für die hier betrachteten hadronischen Observablen sowohl bei hohen als auch bei mittleren Energien. Dies hängt damit zusammen, dass bei hohen Energien, wo die Materie vom QGP dominiert wird, ein sehr kleines chemisches Baryonenpotential μB in zentralen Kollisionen bei mittlerer Rapidität gemessen wird, während mit abnehmender Energie und größerem μB der Anteil des QGPs rapide abnimmt, sodass die endgültigen Beobachtungswerte insgesamt von den Hadronen dominiert werden, die an der hadronischen Rückstreuung teilgenommen haben, und somit die Information über ihren QGP-Ursprung verwaschen oder verloren geht.
In Kapitel 4 betrachten wir die Transportkoeffizienten von QGP-Materie im erweiterten Polyakov-NJL-Modell entlang der Übergangslinie für moderate Werte des chemischen Baryonenpotenzials 0 ≤ μB ≤ 0.9 GeV sowie in der Nähe des kritischen Endpunkts(CEP) und bei großem chemischen Baryonenpotenzial μB = 1.2 GeV, wo ein Phasenübergang erster Ordnung stattfindet. Wir untersuchen, wie die Natur der Freiheitsgrade die Transporteigenschaften des QGPs beeinflusst. Darüber hinaus demonstrieren wir die Auswirkungen des Phasenübergangs erster Ordnung und des CEP auf die Transportkoeffizienten im dekonfinierten QCD-Medium.
Darüber hinaus wird in Kapitel 5 eine phänomenologische Erweiterung des DQPM auf große baryonchemische Potentiale μB einschließlich der Region mit einem möglichen CEP und späterem Phasenübergang erster Ordnung betrachtet. Eines der wichtigsten Merkmale des Modells ist das Auftreten einer ’kritischen‘ Skalierung in der Nähe des CEP. Das Hauptziel des vorgestellten Modells besteht darin, die mikroskopischen und makroskopischen Eigenschaften der partonischen Freiheitsgrade für den Bereich des Phasendiagramms bereitzustellen, der durch moderates T und moderates oder hohes μB gekennzeichnet ist.
...
Neurons are cells with a highly complex morphology; their dendritic arbor spans up to thousands of micrometers. This extended arbor poses a challenge for the logistics of neuronal processes: mRNA, proteins, and organelles have to be transported to dendrites, hundreds of micrometers away from the soma. This thesis aims to calculate the minimum number of proteins needed to populate the dendritic trees for different scenarios.
In chapter 2, I analyzed the ability of different mechanisms to populate the dendritic arbor. I started from the solution of the diffusion equation in Sec. 2.1, then I included the contribution of active transport in Sec. 2.2 and showed how it could have either the effect of increasing the effective diffusion coefficient or of introducing a bias in the diffusion process. In Sec. 2.3 I studied the spatial distribution of locally synthesized protein, accordingly with actively and passively transported mRNA. In Sec. 2.5, I derived the boundary condition for branches showing a qualitatively different behavior of surface and cytoplasmic proteins induced by the medium’s dimensionality in which they diffuse.
In chapter 3, I introduced the concept of protein requirement, defined as the minimum number of proteins that the neuron needs to produce to provide at least one protein to each micrometer of the dendritic arbor. In Sec. 3.1, I derived the protein requirement for diffusive proteins for somatic translation and constant translation in the dendritic arbor. In Sec. 3.2, I analyzed numerically the protein requirement in the case of actively transported protein synthesized in the soma, and, in Sec. 3.3, in the case of actively transported proteins synthesized in the dendritic arbor. In Sec. 3.4, I analyzed the protein requirement of protein synthesized in the dendrite accordingly with the distribution of mRNA described in Sec. 3.3 and 3.2. In Sec. 3.5, I derived the protein requirement for a single branch and purely diffusive proteins.
In chapter 4, I analyzed the relation between the radii of the three afferent dendrites in a branch, their length, and the diffusion length of a protein. In Sec. 4.1 I derived the optimal ratio between the radii of the daughter dendrites that minimizes the protein requirement. In Sec. 4.3 I introduced the 3/2− Rall Rule and in Sec. 4.5 its generalization. Finally, I used those rules to estimate the fraction of proteins diffusing away from and toward the soma.
In chapter 5, I analyzed the radii distribution for three categories of neurons: cultured hippocampal neurons in Sec. 5.1, stomatogastric ganglia neuron in Sec. 5.2, and 3DEM reconstructed prefrontal pyramidal neurons in Sec. 5.3. For each of these three classes, I analyzed the distribution of radii, Rall exponents, and the probability ratio. For most of them, I found that the probability of a protein diffusing away from the soma is higher for surface proteins than for cytoplasmic ones. I quantified this with a parameter called surface bias.
In Chapter 6, I analyzed the fluorescent ratio imaged by our collaborators Anne-Sophie Hafner, for a surface protein, GFP::Nlg, and a soluble one, GFP, in cultured hippocampal neurons, and I compared the fluorescent ratio with the probability ratio obtained in 5.1, finding that they are in good agreement.
In chapter 7, I compared the real dendritic morphologies imaged by one of our collaborators Ali Karimi with the optimal branching rule obtained in Sec. 4.1 and I calculated the cost for not having optimal branching radii.
Finally, in Chapter 8, I used the knowledge of the branching statistics gathered in 5.3 to simulate the protein profile on three different classes of neurons: pyramidal neurons, granule neuron, and Purkinje neurons. I compared the protein profile for surface and cytoplasmic neurons for each morphology for two different values of the diffusion length: λ = 109µm and λ = 473µm, both for optimized radii and symmetrical radii. I showed how the radii optimization reduces the protein requirement of a factor 10 4 for pyramidal neurons.
In this thesis we investigate the thermodynamic and dynamic properties of the D-dimensional quantum Heisenberg ferromagnet within the spin functional renormalization group (FRG); a
formalism describing the evolution of the system’s observables as the magnetic exchange inter-action is artificially deformed. Following an introduction providing a self contained summary of the conceptual and mathematical background, we present the spin FRG as developed by Krieg and Kopietz in references [1] and [2] in chapter two. Thereto, the generating functional of the imaginary time-spin correlation functions and its exact flow equation describing the deformation process of the exchange interaction are introduced. In addition, it is highlighted that - in contrast to conventional field-theoretic FRG approaches - the related Legendre trans-formed functional cannot be defined if the exchange interaction is initially switched off. Next, we show that this limitation can be circumvented within an alternativ hybrid approach, which treats transverse and longitudinal spin fluctuations differently. The relevant functionals are introduced and the relations of the corresponding functional Taylor coefficients with the spin correlation functions are discussed. Lastly, the associated flow equations are derived and the possibility of explicit or spontaneous symmetry breaking is taken into account.
In chapter three, we benchmark the hybrid formalism against a calculation of the thermo-dynamic properties of the one and two-dimensional Heisenberg model at low temperatures T and finite magnetic field H. For this purpose, we devise an anisotropic deformation scheme of the exchange interaction which allows for a controlled truncation of the infinite hierarchy of FRG flow equations. Thereby, contact with mean-field and spin-wave theory is made and the violation of the Mermin-Wagner theorem is discussed. To fulfill the latter, the truncation scheme is then complemented by a Ward identity relating the transverse self-energy and the magnetization. The resulting magnetization M (H, T ) and isothermal susceptibility χ(H, T ) are in quantitative agreement with the literature and the established behavior of the transverse correlation length and the zero-field susceptibility close to the critical point is qualitatively reproduced in the limit H → 0.
Finally, we investigate the longitudinal dynamics at low temperatures. To this end, the hierarchy of flow equations is solved within the same anisotropic deformation scheme complemented by an expansion in the inverse interaction range, and the resulting longitudinal dynamic structure factor is calculated within a low-momentum expansion. In D = 3, the large phase space accessible for the decay into transverse magnons yields only a broad hump centered at zero frequency whose width scales linearly in momentum. In contrast, at low temperatures and in a certain range of magnetic fields, a well-defined quasiparticle peak with linear dispersion emerges in D ≤ 2, which we identify as zero-magnon sound. Sound velocity and damping are discussed as a function of temperature and magnetic field, and the relevant momentum-frequency window is estimated and compared to the hydrodynamic
second-magnon regime.
Terahertz (THz) technology is an emerging field that considers the radiation between microwave and far-infrared regions where the electronic and photonic technologies merge. THz generation and THz sensing technologies should fill the gap between photonics and electronics which is defined as a region where THz generation power and THz sensing capabilities are at a low technology readiness level (TRL). As one of the options for THz detection technology, field-effect transistors with integrated antennae were suggested to be used as THz detectors in the 1990s by M. Dyakonov and M. Shur from where the development of field-effect transistor-based detector began. In this work, various FET technologies are presented, such as CMOS, AlGaN/GaN, and graphene-based material systems and their further sensitivity enhancement in order to reach the performance of well-developed Schottky diode-based THz sensing technology. Here presented FET-based detectors were explored in a wide frequency range from 0.1 THz up to 5 THz in narrowband and broadband configurations.
For proper implementation of THz detectors, the well-defined characterization is of high importance. Therefore, this work overviews the characterization methods, establishes various definitions of detector parameters, and summarizes the state-of-the-art THz detectors. The electrical, optical, and cryogenic characterization techniques are also presented here, as well as the best results obtained by the development of the characterization methods, namely graphene FET stabilization, low-power THz source characterization for detector calibration, and technology development for cryogenic detection.
Following the discussion about the detector characterization, a wide range of THz applications, which were tested during the last four years of Ph.D. and conducted under the ITN CELTA project from HORIZON2020 program, are presented in this work. The studies began with spectroscopy applications and imaging and later developed towards hyperspectral imaging and even passive imaging of human body THz radiation. As various options for THz applications, single-pixel detectors as well as multi-pixel arrays are also covered in this work.
The conducted research shows that FET-based detectors can be used for spectroscopy applications or be easily adapted for the relevant frequency range. State-of-the-art detectors considered in this work reach the resonant performance below 20 pW/√Hz at 0.3 THz and 0.5 THz, as well as 404 pW/√Hz cross-sectional NEP at 4.75 THz. The broadband detectors show NEP as low as 25 pW/√Hz at around 0.6 THz for the best AlGaN/GaN design and 25 pW/√Hz around 1 THz for the best CMOS design. As one of the most promising applications, metamaterial characterization was tested using the most sensitive devices. Furthermore, one of the single-pixel devices and a multi-pixel array were tested as an engineering solution for a radio astronomy system called GREAT in a stratosphere observatory named SOFIA. The exploration of the autocorrelation technique using FET-based devices shows the opportunity to employ such detectors for direct detection of THz pulses without an interferometric measurement setup.
This work also considers imaging applications, which include near-field and far-field visualization solutions. A considerable milestone for the theory of FET technology was achieved when scanning near-field microscopy led to the visualization of plasma (or carrier density) waves in a graphene FET channel. Whereas another important milestone for the THz technology was achieved when a 3D scan of a mobile phone was performed under the far-field imaging mode. Even though the imaging was done through the phone’s plastic cover, the image displayed high accuracy and good feature recognition of the smartphone, inching the FET-based detector technology ever so close to practical security applications. In parallel, the multi-pixel array testing was carried out on 6x7 pixel arrays that have been implemented in configurable-size aperture and imaging configurations. The configurable aperture size allowed the easier detector focusing procedure and a better fit for the beam size of the incident radiation. The imaging has been tested on various THz sources and compared to the TeraSense 16x16 pixel array. The experimental results show the big advantage of the developed multi-pixel array against the used commercial technology.
Furthermore, two ultra-low-power applications have been successfully tested. The application on hyper-frequency THz imaging tested in the specially developed dual frequency comb and our detector system for 300 GHz radiation with 9 spectral lines led to outstanding imaging results on various materials. The passive imaging of human body radiation was conducted using the most sensitive broadband CMOS detector with a log-spiral antenna working in the 0.1 – 1.5 THz range and reaching the optical NEP of 42 pW/√Hz. The NETD of this device reaches 2.1 K and overcomes the performance limit of passive room-temperature imaging of the human body radiation, which was less than 10 K above the room temperature. This experiment opened a completely new field that was explored before only by the multiplier chain-based or thermal detectors.
...
Bohmian mechanics as formulated originally in 1952, has been useful in the implementation of numerical methods applied to quantum mechanics. The scientific community though has had ever since a critical thought about it. Therefore, there are still points to be clarified and rectified. The two main problems are basically: Bohmian mechanics gives a privilege role to the position representation. Secondly, the current interpretation of Bohmian trajectories has been recently proven wrong.
In this context, in Chapter 2, new complex Bohmian quantities are defined; so that they allow the capacity to formulate Bohmian mechanics in any arbitrary continuous representation, for instance, the momentum representation. This Chapter is fully based on two articles, regarding the proposed complex Bohmian formulation and its extension into momentum space.
Chapter 3 deals with a redefinition and reinterpretation of the Bohmian trajectories from the handling of the continuity equation, this is done without any need of additional postulates or interpretations. Also, it is proved that Bohmian mechanics is actually more than a projective aspect of the Wigner function.
As a third point, Chapter 4 presents a sytematic treatment of the hydrodynamic scheme of Bohmian mechanics. Then, a brief summary of the transport equations in Bohmian mechanics is done. Next, a unified hydrodynamic treatment is found for the Bohmian mechanics. This treatment is useful to sketch, a Bohmian treatment to efficiently find the steady value of the transmission integral.
In Chapter 5 conclusions of this thesis are drawn.
Das Feld der Hochenergie-Schwerionenforschung hat sich der Untersuchung des Quark-Gluon-Plasmas (QGP) gewidmet. Ein QGP ist ein sehr heißer und dichter Materiezustand, der kurz nach dem Urknall für einige Mikrosekunden das Universum füllte. Unter diesen extremen Bedingungen sind die fundamentalen Bausteine der Materie, die Quarks und Gluonen, quasi frei, also nicht in Hadronen eingeschlossen, wie es unter normalen Bedingungen der Fall ist. Hadronen sind Teilchen, die aus Quarks und Gluonen bestehen. Die bekanntesten Hadronen sind Protonen und Neutronen, die Bestandteile von Atomkernen, aus denen, zusammen mit Elektronen, die gesamte bekannte Materie aufgebaut ist.
Um ein QGP im Labor zu erzeugen, lässt man ultrarelativistische schwere Ionen, wie zum Beispiel Pb-208-Kerne, aufeinander prallen. Dies geschieht am CERN, dem größten Kernforschungszentrum der Welt. Der Teilchenbeschleuniger, welcher Protonen und Pb-Kerne beschleunigt und zur Kollision bringt, heißt Large Hadron Collider (LHC) und ist mit 27 km Umfang der größte der Welt. Bei einer einzigen Pb-Pb Kollision am LHC werden mehrere Tausend Teilchen und Antiteilchen erzeugt. Das dedizierte Experiment zur Untersuchung von Schwerionenkollisionen am LHC ist ALICE. ALICE ist mit mehreren Teilchendetektoren ausgerüstet, die es ermöglichen, tausende Teilchen gleichzeitig zu messen und zu identifizieren.
Unter den produzierten Teilchen befinden sich auch leichte Atomkerne, wenngleich diese nur sehr selten erzeugt werden. Die Anzahl der produzierten Teilchen pro Teilchensorte hängt nämlich von deren Masse ab. In Pb-Pb Kollisionen am LHC sinkt die Anzahl der produzierten (Anti)kerne exponentiell um einen Faktor 1/330 bei Hinzufügen jedes weiteren Nukleons. Die Menge an produzierten Teilchen pro Spezies stellt Informationen über den Produktionsmechanismus beim Übergang vom QGP zum Hadrongas zur Verfügung. Hierbei sind leichte (Anti)kerne von besonderem Interesse, da sie vergleichsweise groß sind und ihre Bindungsenergie bis zu zwei Größenordnungen kleiner ist als die Temperaturen, die bei der Erzeugung der Hadronen vorherrschen. Es ist bis heute noch nicht verstanden, wie leichte (Anti)kerne bei diesen Bedingungen erzeugt werden und überleben können.
Für diese Arbeit wurden ca. 270 Millionen Pb-Pb Kollisionen bei einer Schwerpunktsenergie von 5,02 TeV, die von ALICE im November 2018 aufgezeichnet wurden, analysiert. Es wurde die Produktion von (Anti)triton und (Anti)alpha untersucht. Wegen ihrer großen Masse werden beide Kerne sehr selten produziert, bei weitem nicht bei jeder Kollision. Antialpha ist der schwerste Antikern, der jemals gemessen wurde. Aufgrund dieser Seltenheit ist die Größe des zur Verfügung stehenden Datensatzes entscheidend. Es war möglich, das erste jemals gemessene Antialpha-Transversalimpulsspektrum zu extrahieren. Auch für (Anti)triton und Alpha wurden Transversalimpulsspektren bestimmt.
Die Ergebnisse wurden mit theoretischen Modellen und anderen ALICE Messungen verglichen.
Am Ende wird in einem Ausblick auf das kürzlich durchgeführte Upgrade der ALICE Spurendriftkammer (TPC) eingegangen. In der nächsten, bald startenden Datennahmeperiode wird der LHC seine Kollisionsrate erheblich erhöhen, was es ermöglichen wird, mehr als 100 mal so viele Daten wie bisher aufzuzeichnen. Hiervon werden die in dieser Arbeit beschriebenen (Anti)triton- und (Anti)alpha-Analysen beachtlich profitieren. Um mit den erheblich höheren Kollisionsraten zurecht zu kommen, mussten einige Detektoren, unter anderem die TPC, maßgeblich erneuert werden. In den ersten beiden Datennahmeperioden wurde die TPC mit Vieldrahtproportionalkammern betrieben. Diese sind allerdings viel zu langsam für die geplanten Kollisionsraten. Deshalb wurden sie im Jahr 2019, während einer langen Betriebspause des LHC, durch Quadrupel-GEM (Gas Electron Multiplier) Folien basierte Auslesekammern ersetzt, welche eine kontinuierliche Auslese der TPC ermöglichen. Da es sich um die erste jemals gebaute GEM TPC im Großformat handelt, war ein umfangreiches Forschungs- und Entwicklungs- (F&E) Programm notwendig, um die GEM Auslesekammern zu charakterisieren und zu testen. Im Rahmen dieses F&E Programms wurden am Anfang dieser Promotion systematische Messungen an einer kleinen Test TPC mit Quadrupel-GEM Auslese, die extra zu diesem Zweck gebaut worden war, durchgeführt. Hierbei wurde der Rückfluss der bei der Gasverstärkung erzeugten Ionen in das Driftvolumen der TPC und die Energieauflösung mit verschiedenen GEM Folien Typen und unterschiedlicher Anordnung gemessen. Das Ziel war, möglichst kleine Ionenrückflüsse bei möglichst guter Energieauflösung zu erreichen. Hierbei musste ein Kompromiss gefunden werden, da die beiden Größen sich gegenläufig verhalten. Es war jedoch möglich, mit mehreren GEM Konfigurationen Spannungseinstellungen zu identifizieren, bei denen beide Größen den gewünschten Anforderungen entsprachen.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
Classical light microscopy is one of the main tools for science to study small things. Microscopes and their technology and optics have been developed and improved over centuries, however their resolution is ultimately restricted physically by the diffraction of light based on its wave nature described by Maxwell’s equations. Hence, the nanoworld – often characterized by sub-100-nm structural sizes – is not accessible with classical far-field optics (apart from special x-ray laser concepts) since its lateral resolution scales with the wavelength.
It was not until the 20th century that various technologies emerged to circumvent the diffraction limit, including so-called near-field microscopy. Although conceptually based on Maxwell’s long known equations, it took a long time for the scientific community to recognize its powerful opportunities and the first embodiments of near-field microscopes were developed. One representative of them is the scattering-type Scanning Near-field Optical Microscope (s-SNOM). It is a Scanning Probe Microscope (SPM) that enables imaging and spectroscopy at visible light frequencies down to even radio waves with a sub-100-nm resolution regardless of the wavelength used. This work also reflects this wide spectral range as it contains applications from near-infrared light down to deep THz/GHz radiation.
This thesis is subdivided into two parts. First, new experimental capabilities for the s-SNOM are demonstrated and evaluated in a more technical manner. Second, among other things, these capabilities are used to study various transport phenomena in solids, as already indicated in the title.
On the technical side, preliminary studies on the suitability of the qPlus sensor – a novel scanning probe technology – for near-field microscopy are presented.
The scanning head incorporating the qPlus sensor–named TRIBUS – is originally intended and built for ultra-high vacuum, low temperature, and high resolution applications. These are desirable environments and properties for sensitive nearfield measurements as well. However, since its design was not planned for near-field measurements, several special technical and optical aspects have to be taken into account, among others the scanning tip design and a spring suspended measurement head.
In addition, in this thesis field-effect transistors are used as THz detectors in an s-SNOM for the first time. Although THz s-SNOM is already an emerging technology, it still suffers from the requirements of sophisticated and specialized infrastructure on both the detector and laser side. Field-effect transistors offer an alternative that is flexible, cost-efficient, room-temperature operating, and easy to handle. Here, their suitability for s-SNOM measurements, which in general require very sensitive and fast detectors, is evaluated.
In the scientific part of this thesis, electromagnetic surface waves on silver nanowires and the conductivity/charge carrier density in silicon are investigated. Both are completely different concepts of transport phenomena, but this already shows the general versatility of the s-SNOM as it can enter both fields. Silver nanowires are analysed by means of near-infrared radiation. Their plasmonic behaviour in this spectral region is studied complementing other simulations and studies in literature performed on them using for example far-field optics.
Furthermore, the surface wave imaging ability of the s-SNOM in the near-infrared regime is thoroughly investigated in this thesis. Mapping surface waves in the mid-infrared regime is widespread in the community, however for much smaller wavelengths there are several important aspects to be considered additionally, such as the smaller focal spot size.
After that, doped and photo-excited silicon substrates are investigated. As the characteristic frequencies of charge carriers in semiconductors – described by the plasma frequency and the Drude model – are within the THz range, the THz s-SNOM is very well suited to probe their behaviour and to reveal contrasts, which has already been shown qualitatively by numerous literature reports. Here, the photo-excitation enables to set and tune the charge carrier density continuously.
Furthermore, the analysis of all silicon samples focuses on a quantitative extraction of the charge carrier densities and doping levels ...