Institutes
Refine
Year of publication
- 2014 (35) (remove)
Document Type
- Doctoral Thesis (17)
- Article (12)
- Master's Thesis (4)
- Bachelor Thesis (1)
- Habilitation (1)
Has Fulltext
- yes (35)
Is part of the Bibliography
- no (35)
Keywords
Institute
Sparse sensor networks for Lamb wave-based structural health monitoring (SHM) can detect defects in plate-like structures. However, the limited number of sensor positions provides little information to characterize the unknown scatterer. This can be achieved by full wavefield analysis e.g. using Laser Doppler vibrometry measurements.
This paper proposes deconvolution processing that enhances the acoustic wavefield interpretation by increasing the temporal resolution of the underlying ultrasound signals. Applying this preprocessor to the whole wavefield allows improved non-destructive assessment of the defect. This approach is verified experimentally through a case study on an isotropic aluminum plate with four cracks.
The traffic AAA-ATPase PilF is essential for pilus biogenesis and natural transformation of Thermus thermophilus HB27. Recently, we showed that PilF forms hexameric complexes containing six zinc atoms coordinated by conserved tetracysteine motifs. Here we report that zinc binding is essential for complex stability. However, zinc binding is neither required for pilus biogenesis nor natural transformation. A number of the mutants did not exhibit any pili during growth at 64 °C but still were transformable. This leads to the conclusion that type 4 pili and the DNA translocator are distinct systems. At lower growth temperatures (55 °C) the zinc-depleted multiple cysteine mutants were hyperpiliated but defective in pilus-mediated twitching motility. This provides evidence that zinc binding is essential for the role of PilF in pilus dynamics. Moreover, we found that zinc binding is essential for complex stability but dispensable for ATPase activity. In contrast to many polymerization ATPases from mesophilic bacteria, ATP binding is not required for PilF complex formation; however, it significantly increases complex stability. These data suggest that zinc and ATP binding increase complex stability that is important for functionality of PilF under extreme environmental conditions.
The colour-singlet axial-vector vertex plays a pivotal role in understanding dynamical chiral symmetry breaking and numerous hadronic weak interactions, yet scant model-independent information is available. We therefore use longitudinal and transverse Ward–Green–Takahashi (WGT) identities, together with kinematic constraints, in order to ameliorate this situation and expose novel features of the axial vertex: amongst them, Ward-like identities for elements in the transverse piece of the vertex, which complement and shed new light on identities determined previously for components in its longitudinal part. Such algebraic results are verified via solutions of the Bethe–Salpeter equation for the axial vertex obtained using two materially different kernels for the relevant Dyson–Schwinger equations. The solutions also provide insights that suggest a practical Ansatz for the axial-vector vertex.
We explore the parameter space of the two-flavor thermal quark–meson model and its Polyakov loop-extended version under the influence of a constant external magnetic field B. We investigate the behavior of the pseudo critical temperature for chiral symmetry breaking taking into account the likely dependence of two parameters on the magnetic field: the Yukawa quark–meson coupling and the parameter T0 of the Polyakov loop potential. Under the constraints that magnetic catalysis is realized at zero temperature and the chiral transition at B=0 is a crossover, we find that the quark–meson model leads to thermal magnetic catalysis for the whole allowed parameter space, in contrast to the present picture stemming from lattice QCD.
We study vacuum masses of charmonia and the charm-quark diffusion coefficient in the quark-gluon plasma based on the spectral representation for meson correlators. To calculate the correlators, we solve the quark gap equation and the inhomogeneous Bethe–Salpeter equation in the rainbow-ladder approximation. It is found that the ground-state masses of charmonia in the pseudoscalar, scalar, and vector channels can be well described. For 1.5Tc<T<3.0Tc, the value of the diffusion coefficient D is comparable with that obtained by lattice QCD and experiments: 3.4<2πTD<5.9. Relating the diffusion coefficient with the ratio of shear viscosity to entropy density η/s of the quark-gluon plasma, we obtain values in the range 0.09<η/s<0.16.
We present a simultaneous calculation of heavy single-Λ hypernuclei and compact stars containing hypernuclear core within a relativistic density functional theory based on a Lagrangian which includes the hyperon octet and lightest isoscalar-isovector mesons which couple to baryons with density-dependent couplings. The corresponding density functional allows for SU(6) symmetry breaking and mixing in the isoscalar sector, whereby the departures in the σ–Λ and σ–Σ couplings away from their values implied by the SU(3) symmetric model are used to adjust the theory to the laboratory and astronomical data. We fix σ–Λ coupling using the data on the single-Λ hypernuclei and derive an upper bound on the σ–Σ from the requirement that the lower bound on the maximum mass of a compact star is 2M⊙.
In this work the baryon number and strange susceptibility of second and fourth order are presented. The results at zero baryon-chemical potential are obtained using a well tested chiral effective model including all known hadron degrees of freedom and additionally implementing quarks and gluons in a PNJL-like approach. Quark and baryon number susceptibilities are sensitive to the fundamental degrees of freedom in the model and signal the shift from massive hadrons to light quarks at the deconfinement transition by a sharp rise at the critical temperature. Furthermore, all susceptibilities are found to be largely suppressed by repulsive vector field interactions of the particles. In the hadronic sector vector repulsion of baryon resonances restrains fluctuations to a large amount and in the quark sector above Tc even small vector field interactions of quarks quench all fluctuations unreasonably strong. For this reason, vector field interactions for quarks have to vanish in the deconfinement limit.
We show how repulsive interactions of deconfined quarks as well as confined hadrons have an influence on the baryon number susceptibilities and the curvature of the chiral pseudo-critical line in effective models of QCD. We discuss implications and constraints for the vector interaction strength from comparisons to lattice QCD and comment on earlier constraints, extracted from the curvature of the transition line of QCD and compact star observables. Our results clearly point to a strong vector repulsion in the hadronic phase and near-zero repulsion in the deconfined phase.
We study the phase structure of QCD at finite temperature within a Polyakov-loop extended quark–meson model. Such a model describes the chiral as well as the confinement-deconfinement dynamics. In the present investigation, based on the approach and results put forward in [1], [2], [3], [4], both matter and glue fluctuations are included. We present results for the order parameters as well as some thermodynamic observables and find very good agreement with recent results from lattice QCD.
Within the statistical model, the net strangeness conservation and incomplete total strangeness equilibration lead to the suppression of strange particle multiplicities. Furthermore, suppression effects appear to be stronger in small systems. By treating the production of strangeness within the canonical ensemble formulation we developed a simple model which allows to predict the excitation function of K+/π+ ratio in nucleus–nucleus collisions. In doing so we assumed that different values of K+/π+, measured in p + p and Pb + Pb interactions at the same collision energy per nucleon, are driven by the finite size effects only. These predictions may serve as a baseline for experimental results from NA61/SHINE at the CERN SPS and the future CBM experiment at FAIR.
The fluctuations in the ideal quantum gases are studied using the strongly intensive measures Δ[A,B] and Σ[A,B] defined in terms of two extensive quantities A and B. In the present Letter, these extensive quantities are taken as the motional variable, A=X, the system energy E or transverse momentum PT, and number of particles, B=N. This choice is most often considered in studying the event-by-event fluctuations and correlations in high energy nucleus–nucleus collisions. The recently proposed special normalization ensures that Δ and Σ are dimensionless and equal to unity for fluctuations given by the independent particle model. In statistical mechanics, the grand canonical ensemble formulation within the Boltzmann approximation gives an example of independent particle model. Our results demonstrate the effects due to the Bose and Fermi statistics. Estimates of the effects of quantum statistics in the hadron gas at temperatures and chemical potentials typical for thermal models of hadron production in high energy collisions are presented. In the case of massless particles and zero chemical potential the Δ and Σ measures are calculated analytically.
The Generalized Uncertainty Principle (GUP) arises from Quantum Gravity thought experiments and contains a minimal lenght. In this thesis I calculate Schwarzschild Black Holes that are modified by the GUP. These Black Holes have the property, that their temperature does not diverge for small masses, although they still posses a curvature singularity. I calculate analytically that in more than 3+1 dimensions the temperature diverges again.
In this thesis, Planck size black holes are discussed. Specifically, new families of black holes are presented. Such black holes exhibit an improved short scale behaviour and can be used to implement gravity self-complete paradigm. Such geometries are also studied within the ADD large extra dimensional scenario. This allows black hole remnant masses to reach the TeV scale. It is shown that the evaporation endpoint for this class of black holes is a cold stable remnant. One family of black holes considered in this thesis features a regular de Sitter core that counters gravitational collapse with a quantum outward pressure. The other family of black holes turns out to nicely fit into the holographic information bound on black holes, and lead to black hole area quantization and applications in the gravitational entropic force. As a result, gravity can be derived as emergent phenomenon from thermodynamics.
The thesis contains an overview about recent quantum gravity black hole approaches and concludes with the derivation of nonlocal operators that modify the Einstein equations to ultraviolet complete field equations.
Construction and commissioning of a setup to study ageing phenomena in high rate gas detectors
(2014)
In high-rate heavy-ion experiments, gaseous detectors encounter big challenges in terms of degradation of their performance due to a phenomenon dubbed ageing. In this thesis, a setup for high precision ageing studies has been constructed and commissioned at the GSI detector laboratory. The main objective is the study of ageing phenomena evoked by materials used to build gaseous detectors for the Compressed Baryonic Matter (CBM) experiment at the future Facility for Antiproton and Ion Research (FAIR).
The precision of the measurement, e.g., of the gain of a gaseous detector, is a key element in ageing studies: it allows to perform the measurement at realistic rates in an acceptable time span. It is well known the accelerating ageing employing high intensity sources might produce misleading results. The primary objective is to build an apparatus which allows very accurate measurements and is thus sensitive to minute degradations in detector performance. The construction and commissioning of the
setup has been carried out in two steps. During the first step of this work, a simpler setup which already existed in the detector laboratory of GSI had been utilised to define all conditions related to ageing studies. The outcome of these studies defined the properties and characteristics that must be met to build and operate a new, sophisticated and precise setup. The already existing setup consisted of two identical Multi Wire Proportional Chambers (MWPCs), a gas mixing station, an 55Fe source, an x-ray generator, an outgassing box and stainless steel tubing. In a first step, the gain and electric field configuration of the MWPCs were simulated by a combination of a gas simulation (Magboltz) and electric field simulation program (Garfield). The performance and operating conditions of the chambers have been thoroughly characterised before utilising them in first preparatory ageing test. The main diagnostic parameter in ageing studies is the detector gain, thus it is mandatory for precise ageing studies to minimise the systematic and statistical variation of the pressure and temperature corrected gain. To achieve the required accuracy, several improvements of the chamber design and the gas system have been implemented. In addition, the temperature measurement has been optimised. During the preparatory tests, several ageing studies have been carried out. The ageing effect of seven materials and gases have been carried out during these tests: RTV-3145, Ar/CO2 gas, Durostone flushed with Ar/Isobutane gas, Vetronit G11, Vetronit G11 contaminated with Micro 3000 and Gerband 705. The results of these studies went into the design of the new sophisticated ageing setup. For example some tests revealed that there was, even after cleaning, a certain level of contamination with "ageing agents" in the existing setup, which made it imperative to ensure a very high level cleanness of all components during the construction of the setup. The curing period of some testing samples like glues or the gas flow rate were found to be very important factors that must be taken into account to obtain comparable results. Very important changes in the chamber design have been made, i.e., the aluminium-Kapton cathodes used in MWPCs have been replaced with multi-wire planes and the fibreglass housing of the chamber has been changed to metal. The second step started with building the new setup which was designed based on the findings from the first step. The new ageing setup consists of three MWPCs, two moving platforms, an 55Fe source, a copper-anode x-ray generator, two outgassing boxes, both flexible and rigid stainless steel tubes. Before fabrication of the chambers, simulations of their electric field and the gain have been done using Magboltz and Garfield programs. After that, the chambers were installed and tested. A 0.3% peak-to-peak residual variation of the corrected gain has been achieved. Finally, the complete setup has been operated with full functionality in no-ageing conditions during one week. This test revealed very stable gain in all three chambers. After that two materials (Gerban 705 and RTV-3145) have been inserted in the two outgassing boxes and tested. They revealed an ageing rate of about 0.3%/mC/cm and 3%/mC/cm respectively. The final test proves the stability and accuracy of the ageing measurements carried out with the ageing setup at the detector laboratory at GSI which is ready to conduct the envisaged systematic ageing studies.
Experiments for p-process nucleosynthesis with special focus on the most abundant p nucleus 92Mo
(2014)
This thesis describes experimental investigations and astrophysical network calculations relevant for the nucleosynthesis of the p nuclei. These 35 proton-rich isotopes cannot be produced by neutron-capture reactions which is the general production mechanism for elements heavier than iron in the r and s processes. Therefore, other mechanisms like photo-disintegration reactions on heavy seed nuclei (γ process) or proton-capture reactions are taken into account.
The modelling of these processes relies on a hugh amount of reactions which mostly occur for unstable isotopes. This demands, in combination with the contribution of excited states to the stellar rate, the prediction of the rates by a suited theoretical approach: the Hauser-Feshbach statistical model. To improve the reliability of the predictions, systematic experimental investigations are performed within this work for the nuclear input to the calculations. The study of charged-particle optical model potentials using the activation approach for the investigation of (α,n) and (p,n) reactions is described as well as the investigation of (γ,n) reactions in a broad mass range of 140 ≤ A ≤ 210.
However, there are also key reactions which are of special interest for the nucleosynthesis of individual p nuclei. An impressive example is the puzzle about the production of the most abundant p nucleus 92Mo. Within this work, the results of an experiment using high-resolution in-beam γ-spectroscopy for the study of the 90Zr(p,γ) reaction are summarized. In addition, the efforts to investigate the 91Nb(p,γ) reaction in standard kinematics by the production of target of the unstable isotope 91Nb to be used with the high-intensity proton-beam provided by the accelerator of FRANZ, Frankfurt, are discussed.
Finally, the influence of experimental results in astrophysical network calculations is discussed using post-processing nucleosynthesis methods for the γ process in type II supernovae.
Cryo-electron tomography (CET) is a unique technique to visualize biological objects under near-to-native conditions at near-atomic resolution. CET provides three-dimensional (3D) snapshots of the cellular proteome, in which the spatial relations between macromolecular complexes in their near native cellular context can be explored. Due to the limitation of the electron dose applicable on biological samples, the achievable resolution of a tomogram is restricted to a few nanometers, higher resolution can be achieved by averaging of structures occurring in multiples. For this purpose, computational techniques such as template matching, sub-tomogram averaging and classification are essential for a meaningful processing of CET data.
This thesis introduces the techniques of template matching and sub-tomogram averaging and their applications on real biological data sets. Subsequently, the problem of reference bias, which restricts the applicability of those techniques, is addressed. Two methods that estimate the reference bias in Fourier and real space are demonstrated. The real space method, which we have named the “M-free” score, provides a reliable estimation of the reference bias, which gives access to the reliability of the template matching or sub-tomogram averaging process. Thus, the “M-free” score makes those approaches more applicable to structural biology. Furthermore, a classification algorithm based on Neural Networks (NN) called “KerDenSOM3D” is introduced, which is implemented in 3D and compensates for the missing-wedge. This approach helps extracting different structural states of macromolecular complexes or increasing the class purity of data sets by eliminating outliers. A comprehensive comparison with other classification methods shows superior performance of KerDenSOM3D.
Das Strahldynamikdesign für den MYRRHA-Injektor wurde im Hinblick auf eine hohe Zuverlässigkeit und Verfügbarkeit, sowie eine verbesserte Strahlausgangsemittanz, neu entwickelt und erfüllt nun die Anforderungen des Kernreaktors.
In der statistischen Fehleranalyse zeigt sich die Strahldynamik der CH-Sektion als äußerst robust und liefert selbst unter pessimistischen Fehlerannahmen eine Transmission von über 99,9 %.
Das neue Injektorkonzept bietet wesentliche Vorteile gegenüber dem in „MAX Referenzdesign 2012“ vorgestellten Injektordesign und wird als neues „MAX Referenzdesign 2014“ für den MYRRHA-Injektor verwendet. Die guten strahldynamischen Eigenschaften des neuen Injektordesigns konnten in Vergleichsrechnungen mit TraceWin am IN2P3@CNRS1 (Institut National de Physique Nucléaire et de Physique des Particules @ Centre National de la Recherche Scientifique, Orsay, Frankreich) bestätigt werden.
Neben der Strahldynamik wurde das HF-Design für die benötigten Beschleunigerkavitäten entwickelt und ebenfalls für eine hohe Zuverlässigkeit und Verfügbarkeit optimiert. Das HF-Design der CH-Strukturen ist für eine größtmögliche Ausfallsicherheit auf den Betrieb mit niedrigen elektrischen Feldgradienten, weit unterhalb der technischen Leistungsgrenzen und Möglichkeiten der jeweiligen Kavität, ausgelegt.
Nichtinvasive Detektoren für ortsaufgelöste Strahlprofilmessungen gewinnen mit zunehmenden Strahlströmen und -energien immer mehr an Bedeutung. An der Universität Frankfurt im Institut für Angewandte Physik (IAP) wird ein “Figure Eight”-förmiger magnetostatischer Speichering mit Stellarator-Konfiguration (F8SR) entwickelt. Einige Aspekte der Strahldynamik in einem solchen Ring können mit einem experimentellen Aufbau am IAP untersucht werden. Die Herausforderung bei der Entwicklung eines Detektors an einem (F8SR) liegt auf der einen Seite darin den Strahl nichtinvasiv zu detektieren, und andererseits müssen magnetisch unempfindliche Komponenten für den Detektor ausgewählt werden. Dabei sollte der Detektor so flexibel sein, dass der Strahl entlang der Flugbahn transversal gemessen werden kann. In dieser Arbeit geht es um einen Detektor mit radial um den Strahl angeordneten Photodioden, mit deren Hilfe die strahlinduzierte Fluoreszenz detektiert wird und mit einem geeigneten Rekonstruktionsverfahren, Strahlposition und den Strahldurchmesser ermittelt werden kann. Die Messungen werden mit einem weiteren schon erprobten Detektor - einem Szintillationsschirm verglichen.
The ab-initio molecular dynamics framework has been the cornerstone of computational solid state physics in the last few decades. Although it is already a mature field it is still rapidly developing to accommodate the growth in solid state research as well as to efficiently utilize the increase in computing power. Starting from the first principles, the ab-initio molecular dynamics provides essential information about structural and electronic properties of matter under various external conditions. In this thesis we use the ab-initio molecular dynamics to study the behavior of BaFe2As2 and CaFe2As2 under the application of external pressure. BaFe2As2 and CaFe2As2 belong to the family of iron based superconductors which are a novel and promising superconducting materials. The application of pressure is one of two key methods by which electronic and structural properties of iron based superconductors can be modified, the other one being doping (or chemical pressure). In particular, it has been noted that pressure conditions have an important effect, but their exact role is not fully understood. To better understand the effect of different pressure conditions we have performed a series of ab-initio simulations of pressure application. In order to apply the pressure with arbitrary stress tensor we have developed a method based on the Fast Inertial Relaxation Engine, whereby the unit cell and the atomic positions are evolved according to the metadynamical equations of motion. We have found that the application of hydrostatic and c axis uniaxial pressure induces a phase transition from the magnetically ordered orthorhombic phase to the non-magnetic collapsed tetragonal phase in both BaFe2As2 and CaFe2As2. In the case of BaFe2As2, an intermediate tetragonal non-magnetic tetragonal phase is observed in addition. Application of the uniaxial pressure parallel to the c axis reduces the critical pressure of the phase transition by an order of magnitude, in agreement with the experimental findings. The in-plane pressure application did not result in transition to the non-magnetic tetragonal phase and instead, rotation of the magnetic order direction could be observed. This is discussed in the context of Ginzburg-Landau theory. We have also found that the magnetostructural phase transition is accompanied by a change in the Fermi surface topology, whereby the hole cylinders centered around the Gamma point disappear, restricting the possible Cooper pair scattering channels in the tetragonal phase. Our calculations also permit us to estimate the bulk moduli and the orthorhombic elastic constants of BaFe2As2 and CaFe2As2.
To study the electronic structure in systems with broken translational symmetry, such as doped iron based superconductors, it is necessary to develop a method to unfold the complicated bandstructures arising from the supercell calculations. In this thesis we present the unfolding method based on group theoretical techniques. We achieve the unfolding by employing induced irreducible representations of space groups. The unique feature of our method is that it treats the point group operations on an equal footing with the translations. This permits us to unfold the bandstructures beyond the limit of translation symmetry and also formulate the tight-binding models of reduced dimensionality if certain conditions are met. Inclusion of point group operations in the unfolding formalism allows us to reach important conclusions about the two versus one iron picture in iron based superconductors.
And finally, we present the results of ab-initio structure prediction in the cases of giant volume collapse in MnS2 and alkaline doped picene. In the case of MnS2, a previously unobserved high pressure arsenopyrite structure of MnS2 is predicted and stability regions for the two competing metastable phases under pressure are determined. In the case of alkaline doped picene, crystal structures with different levels of doping were predicted and used to study the role of electronic correlations.
The present work deals with the integration of variable renewable energy sources, wind and solar energy into the European and US power grid. In contrast to other networks, such as the gas supply mains, the electricity network is practically not able to store energy. Generation and consumption therefore always have tobe balanced. Currently, the load curve is viewed as a rigid boundary condition, which must be followed by the generation system. The basic idea of the approach followed here is that weather-dependent generation causes a shift of focus of the electricity supply. At high shares of wind and solar generation, the role of the rigid boundary condition falls to the residual load, that is, the remaining load after subtraction of renewable generation. The goal is to include the weather dependence as well as the load curve in the design of the future electricity supply.
After a brief introduction, the present work first turns to the underlying weather-, generation and load data, which form the starting point of the analysis. In addition, some basic concepts of energy economics are discussed, which are needed in the following.
In the main part of the thesis, several algorithms are developed to determine the load flow in a network with a high share of wind and solar energy and to determine the backup supply needed at the same time. Minimization of the energy needed from controllable power plants, the capacity variable power plants, and the capacity of storing serve as guiding principles. In addition, the optimization problem of grid extensions is considered. It is shown that it can be formulated as a convex optimization problem. It turns out that with an optimized, international transmission network which is about four times the currently available transmission capacity, much of the potential savings in backup energy (about 40%) in Europe can be reached. In contrast, a twelvefold increase the transmission capacity would be necessary for a complete implementation of all possible savings in dispatchable power plants.
The reduction of the dispatchable generation capacity and storage capacity, however, presents a greater challenge. Due to correlations in the generation of time series of individual countries, it may be reduced only with difficulty, and by only about 30%.
In the following, the influence of the relative share of wind and solar energy is illuminated and examined the interplay with the line capacitance. A stronger transmission network tends to lead to a higher proportion of wind energy being better integrated. With increasing line capacity, the optimal mix in Europe therefore shifts from about 70% to 80% wind. Similar analyses are carried out for the US with comparable results.
In addition, the cost of the overall system can be reduced. It is interesting at this point that the advantages for the network integration may outweigh higher production costs of individual technologies, so that it is more favourable from the viewpoint of the entire system to use the more expensive technologies.
Finally, attention is given to the flexibility of the dispatchable power plants. Starting from a Fourier-like decomposition of the load curve as it was a few years ago, when hardly renewable generation capacity was present, capacities of different flexibility classes of dispatchable power plant are calculated. For this purpose, it is assumed that the power plant park is able to follow the load curve without significant surplusses or deficits. From this examination, it is derived what capacity must at least be available without having to resort to a detailed database of existing power plants.
Assuming a strong European cooperation, with a stronger international transmission network, the dispatchable power capacity can be significantly reduced while maintaining security of supply and generating relatively small surplusses in dispatchable power plants.
Focus on quantum efficiency
(2014)
Technologies which convert light into energy, and vice versa, rely on complex, microscopic transport processes in the condensed phase, which obey the laws of quantum mechanics, but hitherto lack systematic analysis and modeling. Given our much improved understanding of multicomponent, disordered, highly structured, open quantum systems, this ‘focus on’ collection collects cuttingedge research on theoretical and experimental aspects of quantum transport in truly complex systems as defined, e.g., by the macromolecular functional complexes at the heart of photosynthesis, by organic quantum wires, or even photovoltaic devices. To what extent microscopic quantum coherence effects can (be made to) impact on macroscopic transport behavior is an equally challenging and controversial question, and this "focus on" collection provides a setting for the present state of affairs, as well as for the "quantum opportunities" on the horizon.
In this thesis, a novel 257 kHz chopper device was numerically developed, technically designed and experimentally commissioned; a 4-solenoid, low-energy ion beam transport line was numerically investigated, installed and experimentally commissioned; and a novel massless beam-separation system was numerically developed.
The chopper combines a pulsed electric field with a static magnetic field in an ExB or Wien-filter type field configuration. Chopped beam pulses with a 257 kHz repetition rate and rise times of 110 ns were experimentally achieved using a 14 keV helium beam.
Due to the achieved results, the complete LEBT line for the future Frankfurt Neutron Source FRANZ is ready to deliver a dc or a pulsed beam. At the same time, the LEBT section represents an attractive test stand for the study of low-energy ion beams. It combines magnetic lenses, which allow space-charge compensated beam transport, and a chopper system capable of producing short beam pulses in the hundred nanosecond range. Since these beam pulses are transported onwards, their longitudinal and transverse properties can be analyzed. The pulse duration and time of flight are well below the rise time for the space-charge compensation through residual gas ionization. This opens the possibility for dedicated investigations of the transport of short, low-energy beam pulses including longitudinal and transverse space-charge effects and of relevant issues like the dynamics of space-charge compensation and electron effects in short pulses.
In dieser Arbeit wird der Strahltransport in einer Niederenergietransportsektion (LEBT) untersucht. Die Untersuchungen werden für die Betriebsmodi der im Aufbau befindlichen Neutronenquelle FRANZ an der Frankfurter Goethe-Universität durchgeführt. Hierbei wird die Akzeptanz eines Choppersystems nach der ersten Sektion des Transportwegs sowie die Akzeptanz des auf die zweite Sektion folgenden RFQ betrachtet und bestmöglich erfüllt. Die Auswirkungen durch die Raumladungswirkung des Ionenstrahls werden berücksichtigt, ebenso die mögliche thermische Belastung durch Strahlverlust an den Komponenten entlang des Strahlwegs. Weiterhin wird der Einfluss eines nicht optimierten Einschusses in den RFQ und die sich daraus ergebenden Strahleigenschaften am Ende des RFQs untersucht.
Der Radiofrequenzquadrupol (RFQ) wird typischerweise als erstes beschleunigendes Element in Beschleunigeranlagen eingesetzt. Das elektrische Quadrupolfeld ermöglicht die gleichzeitige Fokussierung und Beschleunigung des Ionenstrahls. Zudem ist der RFQ in der Lage den Gleichstromstrahl von der Ionenquelle zu Teilchenpaketen (Bunche) zu formen, die von den nachfolgenden Driftröhrenbeschleunigern benötigt werden. Ziel der vorliegenden Arbeit war die Untersuchung zur Realisierbarkeit eines 325 MHz 4-rod RFQ Beschleunigers. Die Frequenz von 325 MHz stellt eine ungewöhnlich hohe Betriebsfrequenz für die 4-rod Struktur dar und wird z.B. für den Protonenlinac des FAIR Projektes benötigt. Ein Problem hierbei war, dass durch die bauartbedingten unsymmetrischen Elektrodenaufhängung und der hohen Frequenz ein, das Quadrupolfeld überlagerndes, Dipolfeld erzeugt wird. Dieses störende Feld kann z.B. zu einem Versatz der Strahlachse führen. Hierzu wurde die 4-rod Struktur in Simulationen grundlegend auf Einflüsse von verschiedenen Parametern auf die Resonanzfrequenz und das Dipolfeld untersucht. Es wurden Lösungsstrategien erarbeitet das Diopolfeld zu kompensieren und auf einen Prototypen angewendet. Zudem wurde das Verhalten höherer Schwingungsmoden dieser Struktur simuliert. In diesem Rahmen wurden auch Simulationen zu Randfeldern zwischen den 4-rod Elektroden und der Tankwand untersucht, um nachteilige Effekte für die Strahlqualität auszuschließen. Basierend auf den Simulationsergebnissen wurde ein Prototyp angefertigt. Dieser Prototyp wurde zur Demonstration der Betriebseigenschaften mit Leistungen bis 40 kW getestet. Hierbei wurde die Elektrodenspannung mittels Gammaspektroskopie bestimmt und daraus die Shuntimpedanz berechnet. Diese Werte wurden mit anderen Methoden der Shuntimpedanzbes- timmung verglichen. Außerdem wurden alternative RFQ Resonatorkonzepte ebenfalls auf ihre Realisierbarkeit für den Protonenlinac untersucht. Die Einflüsse verschiedener Parameter auf die Betriebsfrequenz, die Möglichkeiten des Frequenztunings und der Einstellung der longitudinalen Spannungsverteilung gefertigter Modelle wurden in einer Diskussion gegenübergestellt.
The laser-driven acceleration of protons from thin foils irradiated by hollow high-intensity laser beams in the regime of target normal sheath acceleration is reported for the first time. The use of hollow beams aims at reducing the initial emission solid angle of the TNSA source, due to a flattening of the electron sheath at the target rear side. The experiments were conducted at the PHELIX laser facility at the GSI Helmholtzzentrum für Schwerionenforschung GmbH with laser intensities in the range from 10^18 to 10^20 W/cm^2. We observed an average reduction of the half opening angle by (3.07±0.42)° or (13.2±2)% when the targets have a thickness between 12 to 14 μm. In addition, the highest proton energies were achieved with the hollow laser beam in comparison to the typical Gaussian focal spot.
The subatomic world is governed by the strong interactions of quarks and gluons, described by Quantum Chromodynamics (QCD). Quarks experience confinement into colour-less objects, i.e. they can not be observed as free particles. Under extreme conditions such as high temperature or high density, this constraint softens and a transition to a phase where quarks and gluons are quasi-free particles (Quark-Gluon-Plasma) can occur. This environment resembles the conditions prevailing during the early stages of the universe shortly after the Big Bang.
The phase diagram of QCD is under investigation in current and future collider experiments, for example at the Large Hadron Collider (LHC) or at the Facility for Antiproton and Ion Research (FAIR). Due to the strength of the strong interactions in the energy regime of interest, analytic methods can not be applied rigorously. The only tool to study QCD from first principles is given by simulations of its discretised version, Lattice QCD (LQCD).
These simulations are in the high-performance computing area, hence, the numerical aspects of LQCD are a vital part in this field of research. In recent years, Graphic Processing Units (GPUs) have been incorporated in these simulations as they are a standard tool for general purpose calculations today.
In the course of this thesis, the LQCD application cl2qcd has been developed, which allows for simulations on GPUs as well as on traditional CPUs, as it is based on OpenCL. cl2qcd constitutes the first application for Wilson type fermions in OpenCL.
It provides excellent performance and has been applied in physics studies presented in this thesis. The investigation of the QCD phase diagram is hampered by the notorious sign-problem, which restricts current simulation algorithms to small values of the chemical potential.
Theoretically, studying unphysical parameter ranges allows for constraints on the phase diagram. Of utmost importance is the clarification of the order of the finite temperature transition in the Nf=2 chiral limit at zero chemical potential. It is not known if it is of first or second order. To this end, simulations utilising Twisted Mass Wilson fermions aiming at the chiral limit are presented in this thesis.
Another possibility is the investigation of QCD at purely imaginary chemical potential. In this region, QCD is known to posses a rich phase structure, which can be used to constrain the phase diagram of QCD at real chemical potential and to clarify the nature of the Nf=2 chiral limit. This phase structure is studied within this thesis, in particular the nature of the Roberge-Weiss endpoint is mapped out using Wilson fermions.
Das Schwerionenkollisionen Programm der Beschleuniger RHIC und LHC gibt Hinweise auf einen neuen Zustand hadronischer Materie --- das Quark-Gluon Plasma. Dieses zeichnet sich durch eine zumindest partielle Aufhebung des confinements aus, welches besagt, dass keine freien Quarks beochtbar sind.
Aus einer Beschreibung der experimentellen Daten mit relativistischer Hydrodynamik folgen weitere Eigenschaften. So geht das in einer Schwerionenkollision erzeugte Quark-Gluon Plasma nach sehr kurzer Zeit, etwa 1 fm/c, in ein zumindest lokales thermisches Gleichgewicht über. Durch die Lorentzkontraktion der beiden Schwerionen erwartet man, dass der Zustand direkt nach der Kollision durch eine Impulsanisotropie in der transversal-longitudinalen Ebene bestimmt wird. Somit setzt das Erreichen eines thermischen Gleichgewichts zunächst eine Isotropisierung voraus. Bisherige Studien haben gezeigt, dass gluonische Moden bei dieser Isotropisierung durch Verursachung einer chromo-Weibel Instabilität eine entscheidende Rolle spielen.
Weiterhin verhält sich das Quark-Gluon Plasma wie eine fast perfekte Flüssigkeit. Eine Berücksichtigung dissipativer Terme in der hydrodynamischen Beschreibung erfordert das Hinzufügen weiterer Terme zu den entsprechenden Bewegungsgleichungen. Diese sind proportional zu Transportkoeffizienten, welche durch die zugrunde liegende mikroskopische Theorie festgelegt sind.
Diese Theorie ist Quantenchromodynamik. Sie beschreibt die starke Wechselwirkung der Quarks und Gluonen und ist ein fundamentaler Baustein des Standardmodells der Teilchenphysik. Da im Regelfall Prozesse der starken Wechselwirkung nichtperturbativ sind, beschreiben wir QCD unter Verwendung einer Gitterregularisierung. Diese beruht auf einer Diskretisierung der vierdimensionalen Euklidischen Raumzeit durch einen Hyperkubus mit periodischen Randbedingungen und ermöglicht ein Lösen der QCD mit numerischen Methoden. Allerdings ist die Anwendung der Gittereichtheorie auf Systeme im thermischen Gleichgewicht beschränkt und kann somit keine Prozesse beschreiben, die auf Echtzeit basieren.
Transportkoeffizienten entsprechen Proportionalitätskoeffizienten, die die Relaxation einer Flüssigkeit oder eben eines Quark-Gluon Plasmas von einer kleinen Störung beschreiben. Damit sind sie unmittelbar mit der Zeit verknüpft. Über Kubo-Formeln lassen sie sich jedoch mit Gleichgewichtserwartungswerten retardierter Korrelatoren verknüpfen und werden so in Gitter QCD zugänglich.
In der vorliegenden Dissertation berechnen wir den Transportkoeffizienten κ in Gittereichtheorie für das Yang-Mills Plasma. Dabei nutzen wir aus, dass dieser Transportkoeffizient eine triviale analytische Fortsetzung vom retardierten zum Euklidischen Korrelator besitzt, welcher direkt in Gittereichtheorie zugänglich ist. Es ist die erste nichtperturbative Berechnung eines Transportkoeffizienten in QCD ohne weitere Annahmen, wie die Maximum Entropie Methode oder Ansätze, zu treffen.
Tuning and optimization of the field distribution for 4-rod radio frequency quadrupole linacs
(2014)
In this thesis, the tuning process of the 4-rod Radio Frequency Quadrupole has been analyzed and a theory for the prediction of the tuning plate's influence on the longitudinal voltage distribution was developed together with RF design options for the optimization of the fringe fields.
The basic principles of the RFQ's particle dynamics and resonant behavior are introduced in the theory part of this thesis. All studies that are presented are based on the work on four RFQs of recent linac projects. These RFQs are described in one chapter. Here, the projects are introduced together with details about the RFQ parameters and performance. In the meantime two of these RFQs are in full operation at NSCL at MSU and FNAL. One is operating in the test phase of the MedAustron Cancer Therapy Center and the fourth one for LANL is about to be built. The longitudinal voltage distribution has been studied in detail with a focus on the influence of the RF design with tuning elements and parameters like the electrodes overlap or the distance between stems. The theory for simulation methods for the field flatness that were developed as part of this thesis, as well as its simulation with CST MWS have been analyzed and compared to measurements. The lumped circuit model has proven to predict results with an accuracy that can be used in the tuning process of 4-rod RFQs. Together with results from the tuning studies, the studies on the fringe fields of the 4-rod structure lead to a proposal for a 4-rod RFQ model with an improved field distribution in the transverse and longitudinal electric field.
Fast nuclei are ionizing radiation which can cause deleterious effects to irradiated cells. The modelling of the interactions of such ions with matter and the related effects are very important to physics, radiobiology, medicine and space science and technology. A powerful method to study the interactions of ionizing radiation with biological systems was developed in the field of microdosimetry. Microdosimetry spectra characterize the energy deposition to objects of cellular size, i.e., a few micrometers.
In the present thesis the interaction of ions with tissue-like media was investigated using the Monte Carlo model for Heavy-Ion Therapy (MCHIT) developed at the Frankfurt Institute for Advanced Studies. MCHIT is a Geant4-based application intended to benchmark the physical models of Geant4 and investigate the physical properties of therapeutic ion beams. We have implemented new features in MCHIT in order to calculate microdosimetric quantities characterizing the radiation fields of accelerated nucleons and nuclei. The results of our Monte Carlo simulations were compared with recent experimental microdosimetry data.
In addition to microdosimetry calculations with MCHIT, we also investigated the biological properties of ion beams, e.g. their relative biological effectiveness (RBE), by means of the modified Microdosimetric-Kinetic model (MKM). The MKM uses microdosimetry spectra in describing cell response to radiation. MCHIT+MKM allowed us to study the physical and biological properties of ion beams. The main results of the thesis are as follows:
MCHIT is able to describe the spatial distribution of the physical dose in tissue-like media and microdosimetry spectra for ions with energies relevant to space research and ion-beam cancer therapy; MCHIT+MKM predicts a reduction of the biological effectiveness of ions propagating in extended medium due to nuclear fragmentation reactions; We predicted favourable biological dose-depth profiles for monoenergetic helium and lithium beams similar to the one for carbon beam. Well-adjusted biological dose distributions for H-1, He-4, C-12 and O-16 with a very flat spread-out Bragg peak (SOBP) plateau were calculated with MCHIT+MKM; MCHIT+MKM predicts less damage to healthy tissues in the entrance channel for SOBP He-4 and C-12 beams compared to H-1 and O-16 ones. No definitive advantages for oxygen ions with respect to carbon were found.
Low-energy effective models for two-flavor quantum chromodynamics and the universality hypothesis
(2014)
Die Untersuchung der Natur auf extremen Längenskalen hat seit jeher zu bahnbrechenden Einsichten und Innovationen geführt. Insbesondere zu unserem heutigen Verständnis, dass Nukleonen (Protonen und Neutronen) aus Quarks zusammengesetzt sind, die infolge der starken Wechselwirkung, vermittelt durch Gluonenaustausch, gebunden sind. Mit dem Aufkommen des Quarkmodells wurde bald die Quantenchromodynamik (QCD) erfolgreich in der Beschreibung vieler messbarer Eigenschaften der starken Wechselwirkung. Um es mit Goethe zu sagen: mit den modernen Hochenergie-Beschleuniger-Experimenten wird versucht unser Verständnis davon zu verbessern, was die Welt im Innersten zusammenhält. Am Large Hadron Collider (LHC) werden beispielsweise Protonen derart beschleunigt und miteinander zur Kollision gebracht, dass bislang unerreichte Energiedichten auftreten, infolge derer Temperatur und baryochemisches Potential Werte annehmen, die mit denen des frühen Universums vergleichbar sind. Es gibt sowohl theoretische als auch experimentelle Hinweise darauf, dass hadronische Materie mit zunehmender Temperatur und/oder zunehmendem baryochemischen Potentials einen Phasenübergang durchläuft, hin zu einem exotischen Zustand, der als Quark-Gluon-Plasma bekannt ist. Dieser Übergang wird begleitet von einem sogenannten chiralen Übergang. Es ist eine wichtige Frage, ob es sich bei diesem chiralen Übergang um einen echten Phasenübergang (von erster bzw. zweiter Ordnung) handelt, oder ob ein sogenannter crossover vorliegt. Einige Resultate deuten auf einen crossover für verschwindendes baryochemisches Potential und einen Phasenübergang erster Ordnung für verschwindende Temperatur hin, lassen jedoch noch keinen endgültigen Schluss zu, ob dies tatsächlich der Realität entspricht. Wenn ja, so liegt die Annahme nahe, dass ein kritischer Endpunkt existiert, an dem der chirale Übergang von zweiter Ordnung ist. In der Tat existiert ein kritischer Endpunkt in einigen theoretischen Zugängen zur Beschreibung des chiralen Phasenübergangs, deren Aussagekraft seit jeher lebhaft diskutiert wird. Ein zentrales Ziel des zukünftigen CBM-Experiments an der GSI in Darmstadt ist es, die Existenz im Experiment zu überprüfen.
In der Nähe des QCD-(Phasen)übergangs ist es die Abwesenheit jeglicher perturbativer Entwicklungsparameter, die exakte analytische Berechnungen verbietet. Das gleiche gilt für realistische effektive Modelle für QCD. Nichtperturbative Methoden sind daher unverzichtbar für die Untersuchung des QCD-Phasendiagramms. Zu den populärsten dieser Zugänge gehören Gitter-QCD, Resummierungsverfahren, der Dyson-Schwinger-Formalismus, sowie die Funktionale Renormierungsgruppe (FRG). All diese Methoden ergänzen sich gegenseitig und werden zum Teil auch miteinander kombiniert. Eine der Stärken der FRG-Methode ist, dass sie nicht nur erfolgreich auf effektive Modelle angewendet werden kann, sondern auch auf QCD selbst. Für letztere Ab-Initio-Rechnungen sind die aus effektiven Modellen für QCD gewonnenen Resultate von grossem Wert.
Der Schwerpunkt der vorliegenden Arbeit liegt auf der Fragestellung von welcher Ordnung der chirale Phasenübergang im Fall von genau zwei leichten Quarksorten ist. Problemstellungen wie die Suche nach einer Antwort auf die Frage nach den Bedingungen für die Existenz eines Phasenübergangs zweiter Ordnung, die Bestimmung der Universalitätsklasse in diesem Fall etc. erfordern Wissen aus verschiedenen Gebieten.
Kapitel 1 besteht aus einer allgemeinen Einleitung.
In Kapitel 2 stellen wir zunächst einige allgemeine Aspekte von Phasenübergängen dar, die von besonderer Relevanz für das Verständnis des Renormierungsgruppen-Zugangs zu ebendiesen sind. Unser Fokus liegt hierbei auf einer kritischen Untersuchung der Universalitätshypothese. Insbesondere die Rechtfertigung des linearen Sigma-Modells als effektive Theorie für den chiralen Ordnungsparameter beruht auf der Gültigkeit selbiger.
Kapitel 3 beschäftigt sich mit dem chiralen Phasenübergang von einem allgemeinen Standpunkt aus. Wir ergünzen wohlbekannte Fakten durch eine detaillierte Diskussion der sogenannten O(4)-Hypothese. Die Überprüfung der Gültigkeit selbiger wird schließlich in Kapitel 6 und 7 in Angriff genommen.
In Kapitel 4 stellen wir die von uns benutzte FRG-Methode vor. Außerdem diskutieren wir den Zusammenhang zwischen effektiven Theorien für QCD und der QCD selbst.
Kapitel 5 behandelt ein mathematisches Thema, das für alle unserer Untersuchungen unabdingbar ist, nämlich die systematische Konstruktion polynomialer Invarianten zu einer gegebenen Symmetrie. Wir präsentieren einen einfachen, jedoch neuartigen, Algorithmus für die praktische Konstruktion von Invarianten einer gegebenen polynomialen Ordnung.
Kapitel 6 widmet sich Renormierungsgruppen-Studien einer Reihe dimensional reduzierter Theorien. Von zentralem Interesse ist hierbei das lineare Sigma-Modell, insbesondere in Anwesenheit der axialen Anomalie. Es stellt sich heraus, dass die Fixpunkt-Struktur des letzteren vergleichsweise kompliziert ist und ein tieferes Verständnis der zugrundeliegenden Methode sowie ihrer Annahmen erfordert. Dies führt uns zu einer sorgfältigen Analyse der Fixpunkt-Struktur von Modellen verschiedenster Symmetrien. Im Zusammenhang mit der Untersuchung des Einflusses von Vektor- und Axial-Vektor-Mesonen stoßen wir hierbei auf eine neue Universalitä}tsklasse.
Während wenig Spielraum für die Wahl der Symmetriegruppe der effektiven Theorie für den chiralen Ordnungsparameter besteht, ist die Identifizierung der Ordnungsparameter-Komponenten mit den relevanten mesonischen Freiheitsgraden hochgradig nichttrivial. Diese Wahl entspricht der Wahl einer Darstellung der Gruppe und kann zur Zeit nicht eindeutig aus der QCD hergeleitet werden. Es ist daher unerlässlich, verschiedene Möglichkeiten auszutesten. Eine wohlbekannte Wahl besteht darin, das Pion und seinen chiralen Partner, das Sigma-Meson, der O(4)-Darstellung für SU(2)_A x SU(2)_V zuzuordnen, welche einen Phasenübergang zweiter Ordnung erlaubt. Dieses Szenario ist jedoch nur dann sinnvoll, wenn nahe der kritischen Temperatur alle anderen Mesonen entsprechend schwer sind. Im Fall von genau zwei leichten Quarkmassen erfordert dies eine hinreichend große Anomaliestärke. Berücksichtigt man zusätzlich zum Pion und Sigma-Meson auch das Eta-Meson und das a_0-Meson, liefern unsere derzeitigen expliziten Rechnungen keinen Nachweis für die Existenz eines Phasenübergang zweiter Ordnung. Stattdessen spricht die Abwesenheit eines physikalischen (hinsichtlich der Massen) infrarot-stabilen Fixpunktes für einen fluktuationsinduzierten Phasenübergang erster Ordnung. Dieses Ergebnis ist auch zu erwarten (jedoch nicht impliziert), allein durch die Existenz zweier quadratischer Invarianten. Es besteht jedoch immer noch eine hypothetische Chance auf einen Phasenübergang zweiter Ordnung in der SU(2)_A x U(2)_V -Universalitätsklasse. Dies wäre der Fall, wenn der entsprechende von uns gefundene unphysikalische infrarot-stabile Fixpunkt physikalisch werden sollte in höherer Trunkierungsordnung. Interessanterweise finden wir bei endlicher Temperatur für gewisse Parameter einen Phasenübergang zweiter Ordnung. Es ist unklar, ob diese Wahl der Parameter in den Gültigkeitsbereich der dimensional reduzierten Theorie fällt.
Erst vor kurzem (Ende September 2013) wurde die Existenz eines infrarot-stabilen U(2)_A x U(2)_V-symmetrischen Fixpunkts durch Pelissetto und Vicari verifiziert (die zugehörige anomale Dimension ist mit 0.12 angegeben). Dieses Resultat war sehr
überraschend, da für zwei leichte Quarksorten und abwesende Anomalie ein Phasenübergang erster Ordnung relativ gesichert erschien, insbesondere durch die Epsilon-Entwicklung. Offensichtlich versagt letztere jedoch im Limes D=3, also für drei räumliche Dimensionen, da lediglich Fixpunkte gefunden werden können, die auch nahe D=4 existieren. Inspiriert durch diesen wichtigen Fund führen wir eine FRG-Fixpunktstudie in lokaler Potential-Näherung und hoher Trunkierungsordnung (bis zu zehnter Ordnung in den Feldern) durch. Die Stabilitätsanalyse besitzt jedoch leider keine Aussagekraft, da die Stabilitätsmatrix für den Gaußschen Fixpunkt marginale Eigenwerte besitzt. Wir sind überzeugt davon, dass dies nicht mehr der Fall ist, wenn man über die lokale Potential-Näherung hinausgeht und eine nichtverschwindende anomale Dimension zulässt. Die bisherigen Resultate verdeutlichen die Limitierungen der lokalen Potential-Näherung und der Epsilon-Entwicklung, auf denen unsere Untersuchungen zur Universalitätshypothese in weiten Teilen beruhen. Systematische Untersuchungen der Fixpunktstruktur von Modellen mit acht Ordnungsparameter-Komponenten wurden in der Literatur im Rahmen der Epsilon-Entwicklung durchgeführt und im Rahmen dieser Dissertation innerhalb der lokalen Potential-Näherung. Die meisten der Vorhersagen der Epsilon-Entwicklung konnten bestätigt werden, einige hingegen werden in Frage gestellt durch das Auftauchen marginaler Stabilitätsmatrix-Eigenwerte.
Einige wichtige Fragestellungen können nicht im Rahmen einer dimensional reduzierten Theorie behandelt werden, da die explizite Temperaturabhängigkeit in diesem Fall eliminiert wurde.
Insbesondere ist es in diesem Fall nicht möglich, die Stärke eines Phasenübergangs erster Ordnung vorherzusagen, da diese von Observablen (Meson-Massen und die Pion-Zerfallskonstante im Vakuum) abhängen, an die man bei verschwindender Temperatur fitten muss. Dieser Umstand führt uns zu solchen FRG-Studien, in denen die Temperatur als expliziter Parameter verbleibt.
Ein beträchtlicher Teil der für die vorliegende Dissertation zur Verfügung stehenden Arbeitszeit wurde darauf verwendet, eigene Implementierungen geeigneter Algorithmen zur numerischen Lösung der auftretenden partiellen Differentialgleichungen zu finden. Exemplarische Routinen (welche ausschließlich wohlbekannte Methoden nutzen) sind in einem Anhang zur Verfügung gestellt. Das Hauptziel der vorliegenden Arbeit, die Anwendung auf effektive Modelle für QCD, wird in Kapitel 7 präsentiert. Unsere (vorläufigen) FRG-Studien des linearen Sigma-Modells mit axialer Anomalie bei nichtverschwindender Temperatur erlauben verschiedene Szenarien. Sowohl einen extrem schwach ausgeprägten, als auch einen sehr deutlichen Phasenübergang erster Ordnung, ganz abhängig von der Wahl der Ultraviolett-Abschneideskala und oben genannter Parameter. Sogar ein Phasenübergang zweiter Ordnung scheint möglich für gewisse Parameterwerte. Um verlässliche Schlussfolgerungen zu ziehen, sind weitere Untersuchungen nötig und bereits im Gange. In Kapitel 7 verifizieren wir außerdem bereits bekannte numerische Resultate für das Quark-Meson-Modell.
Der langsame Neutroneneinfang-Prozess (s-Prozess) ist für die Erzeugung von rund der Hälfte der Elemente zwischen Eisen und Blei verantwortlich. Sein Reaktionspfad enthält entlang des Stabilitätstals einige Verzweigungspunkte an instabilen Isotopen, deren Neutroneneinfangquerschnitte die Produktion schwererer Elemente und deren Isotopen-Verhältnisse beeinflussen. Kennt man ihre Zerfalls- und Neutroneneinfangraten unter den angenommenen stellaren Bedingungen ist es möglich, Rückschlüsse auf die physikalischen Umstände während des s-Prozesses zu ziehen. Einer dieser Verzweigungspunkte ist 63-Ni. Die experimentelle Bestimmung des differentiellen Wirkungsquerschnittes für den Neutroneneinfang an diesem Isotop ist das primäre Ergebnis der vorliegenden Arbeit. Der 63-Ni(n,gamma)- Wirkungsquerschnitt hat Einfluss auf die Häufigkeiten von 64-Ni, die Kupfer- und die Zink-Isotope. Die Sensitivität der Produktion dieser Nuklide in s-Prozess-Szenarien wurde ebenfalls im Rahmen dieser Arbeit anhand von Simulationen des entsprechenden Nukleosynthesenetzwerkes untersucht. Zudem wurde die Datenlage für s-Prozess-Modelle mit einer Flugzeit-Messung des 63-Cu(n,gamma)-Wirkungsquerschnitts erweitert.
Die beiden Experimente zur Querschnittsbestimmung von 63-Ni und 63-Cu fanden am Los Alamos Neutron Science Center in New Mexico, USA statt. Eine aus angereichertem 62-Ni hergestellte 63-Ni-Probe wurde im Rahmen einer Flugzeit-Messung gepulst mit Neutronen bestrahlt. Der Nachweis der prompten Gammastrahlung aufgrund von Neutroneneinfängen erfolgte mit dem 4π-BaF_2-Detektor DANCE. Die kalorimetrische Messung macht den Q-Wert der Reaktion für jedes Einfangereignis zugänglich und erlaubt die Unterscheidung von Ereignissen verschiedener Isotope. Es konnte gezeigt werden, dass diese Methode die Bestimmung von Querschnitten selbst mit Proben ermöglicht, die nur zu einem Bruchteil aus dem zu untersuchenden Isotop bestehen. Der 63-Ni(n,gamma)-Wirkungsquerschnitt wurde für den Energiebereich von 40 eV bis 500 keV mit einer maximalen Unsicherheit von 15% bestimmt. Es zeigte sich, dass theoretische Abschätzungen den Querschnitt bislang um etwa einen Faktor 2 unterschätzten. In demselben Energiebereich konnte der 63-Cu(n,gamma)-Wirkungsquerschnitt mit einer maximalen Unsicherheit von 8% vermessen werden.
This thesis is structured into 7 chapters:
• Chapter 2 gives an overview of the ultrashort high intensity laser interaction with matter. The laser interaction with an induced plasma is described, starting from the kinematics of single electron motion, followed by collective electron effects and the ponderamotive motion in the laser focus and the plasma transparency for the laser beam. The three different mechanisms prepared to accelerate and propagate electrons through matter are discussed. The following indirect acceleration of protons is explained by the Target Normal Sheath Acceleration (TNSA) mechanism. Finally some possible applications of laser accelerated protons are explained briefly.
• Chapter 3 deals with the modeling of geometry and field mapping of magnetic lens. Initial proton and electron distributions, fitted to PHELIX measured data are generated, a brief description of employed codes and used techniques in simulation is given, and the aberrations at the solenoid focal spot is studied.
• Chapter 4 presents a simulation study for suggested corrections to optimize the proton beam as a later beam source. Two tools have been employed in these suggested corrections, an aperture placed at the solenoid focal spot as energy selection tool, and a scattering foil placed in the proton beam to smooth the radial energy beam profile correlation at the focal spot due to chromatic aberrations. Another suggested correction has been investigated, to optimize the beam radius at the focal spot by lens geometry controlling.
• Chapter 5 presents a simulation study for the de-neutralization problem in TNSA caused by the fringing fields of pulsed magnetic solenoid and quadrupole. In this simulation, we followed an electrostatic model, wherethe evolution of both, self and mutual fields through the pulsed magnetic solenoid could be found, which is not the case in the quadrupole and only the growth of self fields could be found. The field mapping of magnetic elements is generated by the Matlab program, while the TraceWin code is employed to study the tracking through magnetic elements.
• Chapter 6 describes the PHELIX laser parameters at GSI with chirp pulse amplification technique (CPA), and Gafchromic Radiochromic film RCF) as a spatial energy resolver film detector. The results of experiments with laser proton acceleration, which were performed in two experimental areas at GSI (Z6 area and PHELIX Laser Hall (PLH)), are presented in section 6.3.
• Chapter 7 includes the main results of this work, conclusions and gives a perspective for future experimental activities.
In dieser Arbeit wurden eine Reihe neuer organischer Ladungstransfer (CT)-Verbindungen in Form von Einkristallen und Dünnschichten synthetisiert und grundlegend charakterisiert.
Für die Synthese kamen verschiedene bekannte und bislang unbekannte Donor- und Akzeptormoleküle zum Einsatz. Während einige bekannte Materialien wie TTF und TCNQ kommerziell erworben werden konnten, bestand im Rahmen der Kollaboration mit dem MPI für Polymerforschung zudem Zugang zu mehreren neuen Molekülen wie TMP und HATCN, die besonders mit Blick auf die Möglichkeit zur Dünnschichtpräparation ausgewählt wurden. Auf dieser Grundlage konnten zum einen mittels verschiedener Varianten der Lösungszüchtung erfolgreich neue CT-Komplexe als Einkristalle gezüchtet werden. Dabei kamen mehrere unterschiedliche Lösungsmittel zur Anwendung, die z.T. auch die gezielte Synthese bestimmter Kristallphasen erlaubten. Zum zweiten gelang die Präparation eines Teils dieser Systeme als Dünnschicht über die Methode der Molekularstrahldeposition mit verschiedenen Isolatoren wie SiO2 als Substratmaterial. Hierbei wurde zum Teil zuvor gezüchtetes Material eingesetzt, zum Teil entstand die neue Verbindung erst über diesen Prozess.
Die Proben der neuen Verbindungen wurden zunächst mittels verschiedener Methoden morphologisch und kristallographisch untersucht. Die Kristallzüchtung lieferte in vielen Fällen eine gute Kristallqualität, die sowohl für die Strukturbestimmung als auch die späteren elektrischen Messungen ausreichend war. Die Kristallstruktur konnte für mehrere neue Systeme ermittelt werden und ergab in allen Fällen eine Anordnung mit gemischten Donor-Akzeptor-Stapeln. Für die präparierten Dünnschichten konnte bei einem Großteil der Verbindungen gemäß der Untersuchungen mittels Röntgendiffraktion die gleiche(n) kristalline(n) Struktur(en) wie in den Einkristallen festgestellt werden. Es ließen sich zwei wesentliche Beobachtungen machen: a) Die Morphologie der Schichten besitzt eine ausgeprägte Tendenz zu rauem Inselwachstum; b) In praktisch allen Fällen bilden sich innerhalb der Schicht mindestens zwei stabile CT-Phasen parallel. Beide Verhaltensweisen traten nahezu unabhängig von Substrat, dessen Temperatur, Ausgangszustand (Material vorreagiert oder nicht) und Depositionstemperatur auf.
Die elektronischen Transportmessungen bestanden primär aus temperaturabhängigen Messungen
der elektrischen Leitfähigkeit, während Feldeffektmessungen mit organischen Transistorstrukturen
lediglich den Charakter einer Grundsteinlegung für tiefergehende Untersuchungen mit optimierten Schichten hatten. Die Kryostat-Messungen bis hinunter zu rund 1,5 Kelvin zeigten bei keiner der Verbindungen ein klares Anzeichen für einen Phasenübergang. Die absoluten Werte der Leitfähigkeit bei Raumtemperatur passten qualitativ zu der typischen Erwartung an ein gemischt gestapeltes CT-System, nämlich ein halbleitendes oder isolierendes Verhalten, was durch das arrhenius-artige Temperaturverhalten auch bestätigt wurde.
Dielektrische Messungen mit Kondensatorstrukturen wurden für die neuen Systeme TMP-TCNQ
und ET-DTF in der Dünnschichtform vorgenommen. Im Vordergrund stand dabei die Suche nach neuen Verbindungen, die einen neutral-ionischen Phasenübergang zeigen, der sich im Idealfall durch eine starke, peakförmige Anomalie in der Temperaturabhängigkeit der Dielektrizitätskonstanten bemerkbar machen sollte. Während sich in TMP-TCNQ keinerlei Hinweise auf einen Übergang zeigten, lieferte ET-DTF einen Verlauf, der einen strukturellen
Übergang andeutet, dessen Identität aber noch ungeklärt ist.
Zur Ergänzung wurden mit Hilfe mehrerer Kooperationspartner weitere Untersuchungen zwecks
Charakterisierung der neuen CT-Systeme vorgenommen. Die Bestimmung des Ladungstransfergrades δ mittels IR-Absorption lieferte im Wesentlichen eine Bestätigung der Beobachtung, dass die inspizierten Verbindungen gemischt gestapelte Systeme halbleitender oder
isolierender Natur sind, da δ nur geringe Werte von max. ca. 0,2 zeigte, die für solche Systeme
typisch sind. In ähnlicher Weise bestätigten Bandstruktur-Rechnungen dieses Verhalten, da die Bänder allgemein nur eine eher geringe elektronische Bandbreite zeigten. Zudem ergab sich für die trikline Phase von ET-DTF und das System TMP-F4TCNQ eine deutliche Anisotropie hinsichtlich der Dispersion, da diese erheblich verstärkt entlang der zur Stapelachse des Systems korrespondierenden Richtung des k-Raumes auftritt, also (im Einklang mit den Leitfähigkeitsdaten) 1D-Charakter besitzt. Ein weiterer Beitrag zur Suche nach neuen NI-Verbindungen entstand durch Messung der charakteristischen CT-Absorption einiger Systeme im optischen bzw. IR-Spektrum. In Kombination mit den Werten für Ionisierungsenergie und Elektronenaffinität konnte eine Einordnung in das von Torrance et al. entwickelte, sog. V-Diagramm vorgenommen werden, mit dessen Hilfe sich aussichtsreiche Molekülkombinationen für ein neues NI-System eruieren ließen.
In this thesis hard probes are studied in the partonic transport model BAMPS (Boltzmann Approach to MultiParton Scatterings). Employing Monte Carlo techniques, this model describes the 3+1 dimensional evolution of the quark gluon plasma phase in ultra-relativistic heavy-ion collisions by propagating all particles in space and time and carrying out their collisions according to the Boltzmann equation. Since hard probes are produced in hard processes with a large momentum transfer, the value of the running coupling is small and their interactions should be describable within perturbative QCD (pQCD). This work focuses on open heavy flavor, but also addresses the suppression of light parton jets, in particular to highlight differences due to the mass. For light partons, radiative processes are the dominant contribution to their energy loss. For heavy quarks, we show that also binary interactions with a running coupling and an improved Debye screening matched to hard-thermal-loop calculations play an important role. Furthermore, the impact of the mass in radiative interactions, prominently named the dead cone effect, and the interplay with the Landau-Pomeranchuk-Migdal (LPM) effect are studied in great detail. Since the transport model BAMPS has access to all medium properties and the space time information of heavy quarks, it is the ideal tool to study the dissociation and regeneration of J/psi mesons, which is also investigated in this thesis.
Experimente und Simulationen zur Filterung und Injektion in einen toroidalen Ionenspeicherring
(2014)
Die in dieser Arbeit durchgeführten theoretischen Untersuchungen, Simulationen und Experimente hatten das Ziel, die Erforschung der Injektion in sowie des Transports von Ionenstrahlen bestehend aus verschiedenen, einzelnen Wasserstoffionenspezies durch toroidale Magnetfeldstrukturen zu ermöglichen. Dazu wurde im Rahmen dieser Arbeit ein neues Filter- und Detektorsystem für Wasserstoffionenstrahlen – ein Filterkanal – entwickelt, aufgebaut und untersucht. Zunächst wurde mittels theoretischer Betrachtungen das Konzept des Kanals und die Funktionalität der Filterung sowie Vermessung der Strahlzusammensetzung analysiert. Danach wurde der Kanal mit Hilfe von Simulationen ausgelegt und anschließend nach genauen Vorgaben gebaut. Gleichzeitig wurde mittels weiterer Simulationen das Strahlverhalten im Kanal genauer analysiert und zusätzlich die Auswirkungen verschiedener Parameter auf das Filterverhalten des Kanals untersucht. Anschließend wurde der zusammengebaute Kanal mittels Experimenten erforscht. Dabei wurden mehrere Experimente mit verschiedenen Quellen- und Strahlparametern durchgeführt, wobei vor allem die Filtereigenschaften sowie die Vermessung der Strahlzusammensetzung umfangreich untersucht und im Bezug auf die Funktionalität des Filterkanals diskutiert wurden.
Des Weiteren befasste sich diese Arbeit mit dem Aufbau des Injektionsexperiments zur Untersuchung der Injektion eines Wasserstoffionenstrahls zwischen zwei Toroidsegmente. Dazu wurde ein höhenverstellbarer Injektor samt Hochspannungsterminal und Peripherie entwickelt, aufgebaut und in Betrieb genommen. Dieser besteht aus einer Volumenionenquelle, einer neu entwickelten Faraday-Tasse sowie einem Solenoid. Die Faraday-Tasse, welche zur Vermessung des Quellenstroms im neuen Injektor sowie zusätzlich zur Vermessung des Ionenstrahlstroms hinter dem Filterkanal eingesetzt wird, wurde dabei im Rahmen dieser Arbeit entwickelt, experimentell durchgemessen und auf ihre Funktionalität geprüft. Im Zusammenhang mit dem Hochspannungsterminal für den neuen Injektor wurden die verschiedenen Möglichkeiten für die Verschaltung einer Volumenionenquelle mit dem dazugehörigen Hochspannungsterminal diskutiert und der Zusammenhang zur Strahlenergie hergestellt.
Mittels theoretischer Rechnungen wurde der aufgrund der RxB Drift benötigte Höhenunterschied zwischen Injektionskanal und Transportkanal für das Injektionsexperiment bestimmt und der neue Injektor auf den errechneten Bereich vorkonfiguriert. Zusätzlich wurde mittels Simulationen die optimale Strahlenergie bestimmt, bei der der Strahl beim Transport durch den Transportkanal angepasst ist und somit die Auswirkung der Driftsektion zwischen den beiden Toroidsegmenten sowie die Beeinflussung durch das Injektionssystem am geringsten sein sollten. In diesem Zusammenhang wurde auch auf die möglichen Geometrien zum Aufbau des Injektionsexperiments eingegangen und mittels der angesprochenen Untersuchungen eine Geometrie für den Aufbau des Injektionssystems festgelegt.