Geowissenschaften
Refine
Year of publication
Document Type
- Article (593)
- Doctoral Thesis (139)
- Book (25)
- Contribution to a Periodical (21)
- Conference Proceeding (19)
- Working Paper (19)
- Part of Periodical (10)
- Diploma Thesis (8)
- diplomthesis (7)
- Preprint (6)
- Part of a Book (5)
- Report (5)
- Master's Thesis (4)
- Review (3)
- Bachelor Thesis (2)
- Habilitation (2)
- Other (2)
- Periodical (2)
Is part of the Bibliography
- no (872)
Keywords
- climate change (13)
- Climate change (5)
- Geochemistry (5)
- Klimaänderung (5)
- Atmospheric chemistry (4)
- Boden (4)
- Deutschland (4)
- Klima (4)
- Modellierung (4)
- Stratosphäre (4)
Institute
- Geowissenschaften (872)
- Senckenbergische Naturforschende Gesellschaft (59)
- Präsidium (49)
- Biodiversität und Klima Forschungszentrum (BiK-F) (45)
- Geographie (26)
- Biowissenschaften (15)
- Medizin (11)
- Physik (7)
- Institut für Ökologie, Evolution und Diversität (6)
- Biochemie und Chemie (5)
140 Liter Wasser werden für die Herstellung einer Tasse Kaffee benötigt, 1.300 Liter Wasser für ein Kilo Gerste und 3.400 Liter Wasser für ein Kilo Reis. Diese Zahlen mögen im ersten Moment unglaubwürdig erscheinen, doch sie entsprechen der Wirklichkeit. Für die Herstellung von nahezu allen Produkten wird Wasser in teils sogar sehr großen Mengen benötigt. In dem Endprodukt jedoch findet sich meist nur ein kleiner Teil des ursprünglich eingesetzten Wassers in seiner physischen Form wieder. Der überwiegende Anteil wurde während des Produktionsprozesses verdunstet oder zur Kühlung eingesetzt und wird daher als „virtuelles Wasser“ bezeichnet. Aufgrund des Exports und Imports von Produkten im Zuge des internationalen Handels kommt es somit auch zu Strömen von virtuellem Wasser zwischen den einzelnen Ländern. In dieser Bachelorarbeit wird der virtuelle Wasserhandel mit 23 verschiedenen Feldfrüchten mit dem Fokus auf Deutschland für den Zeitraum von 1998 bis 2002 untersucht. In die Berechnung dieser virtuellen Wasserströme ist ein neuartiges Modell eingegangen, das Global Crop Water Model (GCWM), welches den virtuellen Wassergehalt für unterschiedliche Feldfruchtgruppen global für jede 5-Minuten-Zelle auf Basis detaillierter Daten berechnet. Dank dieses Modells ist es möglich, eine Trennung zwischen dem virtuellen Wasser, welches aus der Nutzung des Niederschlagswassers und dem virtuellen Wasser, welches aus der Bewässerung von Ackerflächen resultiert, vorzunehmen und diese getrennt von einander zu analysieren. Mittels der Verwendung der Handelsstatistik Comtrade der Vereinten Nationen lässt sich aus den Ergebnissen des GCWM der virtuelle Wasserhandel darstellen. Es zeigt sich, dass Deutschland das meiste Wasser in seiner virtuellen Form nach Algerien, Saudi-Arabien, Belgien und in die Niederlande exportiert, wohingegen aus Brasilien, den USA, Frankreich und der Elfenbeinküste die größten virtuellen Wassermengen importiert werden.
Long-term average groundwater recharge representing the sustainable groundwater resources is modeled as a 0.5° by 0.5° grid on global scale by the WaterGAP Global Hydrology Model. Due to uncertainties of estimating groundwater recharge, especially in semiarid and arid regions, independent estimates are used for calibrating the model. This work compiled a new set of independent groundwater recharge estimates based on a work of Scanlon et al. (2006). The 59 independent estimates, together with an already existing independent estimates compilation, are used for the evaluation of two WGHM variants; one variant is modeling with an improved more realistically distributed daily precipitation dataset.
The objective of this thesis is the evaluation of the modeled data of the WaterGAP Global Hydrology Model (WGHM). The analysis of the impact of the new Watch Forcing Data (WFD) precipitation dataset on the modeled groundwater recharge tends to result in lower values in humid and higher values in (semi-)arid regions compared to the WGHM standard variant. Comparing both WGHM variants to the independent estimates compilations, representing (semi-)arid regions, the WGHM variant shows over- and underestimations especially of the low values and the WGHM WFD variant shows a bias toward overestimation especially for values below 4 mm/yr. The analysis of texture, hydrogeology and vegetation/ land cover could not give satisfying explanations for the discrepancies, but derived from the groundwater recharge measurement methods analysis indirect/ localized recharge seems to be a significant factor causing underestimations, as resulted in the comparison of the independent estimates based on Scanlon et al. 2006 with the WGHM variants.
Die vorliegende Diplomarbeit beschäftigt sich mit dem Vergleich des ASTER GDEM und SRTM, zweier kostenlos verfügbarer, digitaler Geländehöhenmodelle mit nahezu globaler Abdeckung. Die Untersuchungsgebiete befinden sich im Kleinwalsertal (Österreich) und in Südhessen (Deutschland). Der Vergleich der Geländehöhendaten erfolgt durch die Ermittlung der Höhenabweichung zu Referenzhöhen, die aus hochauflösenden amtlichen Geländemodellen ermittelt wurden. Die Höhenabweichung wurde zudem für bestimmte geomorphologische Oberflächenformen und Landbedeckungen ermittelt. Des Weiteren werden die Geländehöhendaten auf ihre Eignung für geomorphometrische und hydrologische Analysen bewertet.
Die vorliegende Arbeit wurde im Rahmen des Forschungsprojekts „Integrierte Analyse von mobilen, organischen Fremdstoffen in Fließgewässern“ (INTAFERE) am Institut für Physische Geographie an der Goethe-Universität Frankfurt erstellt. In INTAFERE wurde das Gefährdungspotenzial von mobilen, organischen Fremdstoffen (MOF) für aquatische Ökosysteme und die natürlichen Wasserressourcen in integrierter und partizipativer Art und Weise untersucht. MOF sind chemische Substanzen, die in Alltagsprodukten enthalten sind und durch unterschiedliche Eintragsfade in unbekannten Mengen in Oberflächengewässer eingetragen werden. Problematisch sind aus Umweltgesichtspunkten ihre Eigenschaften: sie besitzen im Wasser eine hohe Mobilität und sind schwer abbaubar. Dies führt zu einer Persistenz über lange Zeiträume. Für einige dieser Substanzen wurde zudem gezeigt, dass sie in sehr geringen Konzentrationen biologisch aktiv sind und für aquatische Ökosysteme eine Gefahr darstellen. In INTAFERE wurden drei zentrale Ziele verfolgt: Charakterisierung des Problemfeldes MOF, Erzeugung von praxisrelevantem Wissen für das Management von MOF und Entwicklung einer Softwareanwendung, die gesellschaftliche Aushandlungsprozesse durch eine transparente Darstellung der Wirkungszusammenhänge im Problemfeld unterstützt. Um einen Beitrag für die Erfüllung der Ziele zu leisten, war es die Aufgabe der Verfasserin, eine Akteursanalyse und -modellierung durchzuführen sowie Zukunftsszenarien im Bereich der MOF zu entwickeln. Dafür existierte keine adäquate Methodik, daher verfolgt die Dissertation zum einen die Entwicklung einer Methodik und zum anderen deren Anwendung im Kontext des Projektes INTAFERE. Da im Forschungsprozess die Durchführung von Analysen, die wissenschaftliche und gesellschaftliche Sichtweise der Problematik sowie die Erarbeitung von praktischen Lösungen im Mittelpunkt standen, wurde eine transdisziplinäre Herangehensweise gewählt. Ziel war es, eine Methodik zu entwerfen, die sowohl eine Entwicklung von Szenarien als auch eine Modellierung von Handlungsentscheidungen umfasst. Eine Modellierung und Visualisierung von Handlungsentscheidungen ist notwendig, um Strategien für ein Umweltproblem für verschiedene Szenarien zu ermitteln, und damit einen Lernprozess der Stakeholder zu initiieren. Dies wurde mit der transdisziplinären Methode „Akteursbasierte Modellierung“ umgesetzt. Hierbei wurden insbesondere Aspekte der Problemwahrnehmung von Akteuren und deren Darstellung, der partizipativen Szenarienentwicklung sowie der semi-quantitativen Modellierung von Handlungsentscheidungen berücksichtigt. Die Verfasserin hat mit der semi-quantitativen akteursbasierten Modellierung eine Methode erarbeitet und getestet, die bisher unverbundene Komponenten (wie die Software Dynamic Actor Network Analysis (DANA) und die Szenarienentwicklung) zusammenführt. Um Handlungsentscheidungen unter verschiedenen Szenarien zu modellieren hat die Autorin eine sequentielle Modellierung entwickelt, die mit der Software DANA durchgeführt werden kann. Die dafür notwendige Weiterentwicklung von DANA wurde von Dr. Pieter Bots (TU Delft) umgesetzt. Die akteursbasierte Modellierung läuft in drei methodischen Schritten ab: 1. Modellierung von Akteurs-Sichtweisen in Form von Wahrnehmungsgraphen und deren Analyse, aufbauend auf Ergebnissen von qualitativen, leitfaden-gestützten Expertengesprächen (= Akteursmodellierung), 2. partizipative Szenarienentwicklung mit den Akteuren und 3. Zusammenführung der Ergebnisse der Akteursmodellierung und der Szenarienentwicklung und darauf aufbauend eine sequentielle Modellierung von Handlungsentscheidungen und deren Auswirkungen auf Schlüsselfaktoren. Im Zuge der Anwendung auf das Problemfeld der MOF wurde für folgende Akteure jeweils ein Wahrnehmungsgraph modelliert: Obere Wasserbehörde, Umweltbundesamt, Umwelt- und Verbraucherschutzorganisationen, Wasserversorger sowie für die Hersteller von verschiedenen MOF, weiterhin für die European Flame Retardants Association und die Weiterverarbeitende Industrie. Das Ergebnis der Szenarienentwicklung waren vier Szenarien: ein Gesundheitsszenario, unter der Annahme von hohen lokalen Umweltstandards durch nachhaltigkeitsorientierte KonsumentInnen, ein Umweltszenario, in dem eine starke Regulierung und nachhaltigkeitsorientierter Konsum Hand in Hand gehen, ein Globalisierungsszenario, in dem Wirtschaftsmacht und preisbewusste KonsumentInnen statt staatliche Regulierung vorherrschen und ein Technikszenario, unter der Annahme, dass Kläranlagen, bedingt durch eine starke Regulierung, aufgerüstet werden. Bei der Modellierung von Handlungsentscheidungen wurden die Wahrnehmungsgraphen und die vier Szenarien miteinander verknüpft. Pro Substanz wurde ein Modell entwickelt, welches die wichtigsten Systemkomponenten in einer angemessenen Komplexität umfasst und die von den Akteuren gemeinsam getragene Einschätzung der Wirkungsbeziehungen darstellt. Insgesamt wurden 16 Modelle entwickelt. Basierend auf den simulierten Akteurshandlungen wurden relativen Veränderungen der Schlüsselfaktoren Produktion, Import und Leistungsfähigkeit der Kläranlagen für die vier genannten Szenarien berechnet. In Zusammenarbeit mit Pieter Bots konnten algorithmische Beiträge zur Analyse- und Modellierungssoftware DANA getestet und verbessert werden. Da keine vollständige und zugleich leicht verständliche Einführung zu DANA vorlag, wurde für Nutzer im Rahmen dieser Dissertation eine Anleitung verfasst, die die Modellierung von Wahrnehmungsgraphen und deren Analyse sowie alle Schritte der akteursbasierten Modellierung mit DANA erläutert.
The design of rainwater harvesting based gardens requires considering current climate but also climate change during the lifespan of the facility. The goal of this study is to present an approach for designing garden variants that can be safely supplied with harvested rainwater, taking into account climate change and adaptation measures. In addition, the study presents a methodology to quantify the effects of climate change on rainwater harvesting based gardening. Results of the study may not be accurate due to the assumptions made for climate projections and may need to be further refined. We used a tank flow model and an irrigation water model. Then we established three simple climate scenarios and analyzed the impact of climate change on harvested rain and horticulture production for a semi-arid region in northern Namibia. In the two climate scenarios with decreased precipitation and medium/high temperature increase; adaptation measures are required to avoid substantial decreases in horticulture production. The study found that the most promising adaptation measures to sustain yields and revenues are a more water efficient garden variant and an enlargement of the roof size. The proposed measures can partly or completely compensate the negative impacts of climate change.
Nach dem Reaktorunfall in Fukushima im März 2011 und dem darauf folgendem Beschluss in Deutschland, den Atomausstieg zu vollziehen, wird dort – sowohl auf nationaler, als auch auf regionaler Ebene – über eine alternative Energieversorgung diskutiert. Für die vorliegende Arbeit stellten sich die Fragen, wie die energiepolitische Ausgangssituation in Hessen aussieht und welche Potenziale erneuerbarer Energien in Hessen vorhanden sind. Mit einer Politikfeldanalyse wurde untersucht, welche Akteure am Ausbau erneuerbarer Energien beteiligt sind, wie diese interagieren, welche Instrumente zur Förderung erneuerbarer Energien in Hessen existieren und welche Erfolgsbedingungen und Restriktionen sich daraus ergeben. Ferner wurde anhand der jeweiligen Energiekonzepte die Frage verfolgt, welche Zukunftspotenziale für erneuerbare Energien die relevanten Akteure sehen und welche energiepolitischen Maßnahmen getroffen werden müssen, um den Ausbau zu forcieren. Bei einem Vergleich des Bundeslandes Hessen mit den Ländern Niedersachsen, Nordrhein-Westfalen und Sachsen-Anhalt wurde festgestellt, welche energiepolitischen Maßnahmen in diesen Bundesländern erfolgreich waren und auf Hessen übertragbar sind. Einerseits wurde aufgezeigt, dass Bemühungen den Ausbau erneuerbarer Energien zu forcieren erkennbar sind. Anderseits konnten ebenso die restriktiven Rahmenbedingungen dargestellt werden, die einen durchschlagenden Erfolg des Ausbaus erneuerbarer Energien bisher behindern. Die Untersuchung der Energiekonzepte hat ergeben, dass die Akteure die Zukunftspotenziale erneuerbarer Energien sehr unterschiedlich sehen und gewichten – sowohl was das zeitliche Ausbauziel als auch die Potenziale der jeweiligen erneuerbaren Energieträger betrifft.
Bayesian Networks are computer-based environmental models that are frequently used to support decision-making under uncertainty. Under data scarce conditions, Bayesian Networks can be developed, parameterized, and run based on expert knowledge only. However, the efficiency of expert-based Bayesian Network modeling is limited by the difficulty in deriving model inputs in the time available during expert workshops. This thesis therefore aimed at developing a simple and robust method for deriving conditional probability tables from expert estimates in a time-efficient way. The design and application of this new elicitation and conversion method is demonstrated using a case study in Xinjiang, Northwest China. The key characteristics of this method are its time-efficiency and the approach to use different conversion tables based on varying levels of confidence. Although the method has its limitations, e.g. it can only be applied for variables with one conditioning variable; it provides the opportunity to support the parameterization of Bayesian Networks which would otherwise remain half-finished due to time constraints. In addition, a case study in the Murray-Darling Basin, Australia, is used to compare Bayesian Network types and software to improve the presentation clarity of large Bayesian Networks. Both case studies aimed at gaining insights on how to improve the applicability of Bayesian Networks to support environmental management.
Irrigation intensifies land use by increasing crop yield but also impacts water resources. It affects water and energy balances and consequently the microclimate in irrigated regions. Therefore, knowledge of the extent of irrigated land is important for hydrological and crop modelling, global change research, and assessments of resource use and management. Information on the historical evolution of irrigated lands is limited. The new global Historical Irrigation Dataset (HID) provides estimates of the temporal development of the area equipped for irrigation (AEI) between 1900 and 2005 at 5 arc-minute resolution. We collected subnational irrigation statistics from various sources and found that the global extent of AEI increased from 63 million ha (Mha) in 1900 to 112 Mha in 1950 and 306 Mha in 2005. We developed eight gridded versions of time series of AEI by combining subnational irrigation statistics with different data sets on the historical extent of cropland and pasture. Different rules were applied to maximize consistency of the gridded products to subnational irrigation statistics or to historical cropland and pasture data sets. The HID reflects very well the spatial patterns of irrigated land in the western United States as shown on historical maps. Mean aridity on irrigated land increased and river discharge decreased from 1900–1950 whereas aridity decreased from 1950–2005. The dataset and its documentation are made available in an open data repository at https://mygeohub.org/publications/8 (doi:10.13019/M2MW2G).
The three-dimensional quantification of small-scale processes in the upper troposphere and lower stratosphere is one of the challenges of current atmospheric research and requires the development of new measurement strategies. This work presents the first results from the newly developed Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA) obtained during the ESSenCe (ESa Sounder Campaign) and TACTS/ESMVal (TACTS: Transport and composition in the upper troposphere/lowermost stratosphere, ESMVal: Earth System Model Validation) aircraft campaigns. The focus of this work is on the so-called dynamics-mode data characterized by a medium-spectral and a very-high-spatial resolution. The retrieval strategy for the derivation of two- and three-dimensional constituent fields in the upper troposphere and lower stratosphere is presented. Uncertainties of the main retrieval targets (temperature, O3, HNO3, and CFC-12) and their spatial resolution are discussed. During ESSenCe, high-resolution two-dimensional cross-sections have been obtained. Comparisons to collocated remote-sensing and in situ data indicate a good agreement between the data sets. During TACTS/ESMVal, a tomographic flight pattern to sense an intrusion of stratospheric air deep into the troposphere was performed. It was possible to reconstruct this filament at an unprecedented spatial resolution of better than 500 m vertically and 20 × 20 km horizontally.
Ternary aerosol nucleation experiments were conducted in the CLOUD chamber at CERN in order to investigate the influence of ions on new particle formation. Neutral and ion-induced nucleation experiments, i.e., with and without the presence of ions, were carried out under precisely controlled conditions. The sulphuric acid concentration was measured with a Chemical Ionization Mass Spectrometer (CIMS) during the new particle formation experiments. The added ternary trace gases were ammonia (NH3), dimethylamine (DMA, C2H7N) or oxidised products of pinanediol (PD, C10H18O2). When pinanediol was introduced into the chamber, an increase in the mass spectrometric signal used to determine the sulphuric acid concentration (m/z 97, i.e., HSO4−) was observed due to ions from the CLOUD chamber. The enhancement was only observed during ion-induced nucleation measurements by using either galactic cosmic rays (GCR) or the proton synchrotron (PS) pion beam for the ion generation, respectively. The ion effect typically involved an increase in the apparent sulphuric acid concentration by a factor of ~2 to 3 and was qualitatively verified by the ion measurements by an Atmospheric Pressure interface-Time Of Flight (APi-TOF) mass spectrometer. By applying a high voltage (HV) clearing field inside the CLOUD chamber the ion effect on the CIMS measurement was completely eliminated since, under these conditions, small ions are swept from the chamber in about one second. In order to exclude the ion effect and to provide corrected sulphuric acid concentrations during the GCR and PS beam nucleation experiments, a parameterisation was derived that utilizes the trace gas concentrations and the UV light intensity as input parameters. Atmospheric sulphuric acid measurements with a CIMS showed an insignificant ion effect.
Ternary aerosol nucleation experiments were conducted in the CLOUD chamber at CERN in order to investigate the influence of ions on new particle formation. Neutral and ion-induced nucleation experiments, i.e. without and with the presence of ions, respectively, were carried out under precisely controlled conditions. The sulfuric acid concentration was measured with a chemical ionisation mass spectrometer (CIMS) during the new particle formation experiments. The added ternary trace gases were ammonia (NH3), dimethylamine (DMA, C2H7N) or oxidised products of pinanediol (PD, C10H18O2). When pinanediol was introduced into the chamber, an increase in the mass spectrometric signal used to determine the sulfuric acid concentration (m/z 97, i.e. HSO4−) was observed due to ions from the CLOUD chamber. The enhancement was only observed during ion-induced nucleation measurements by using either galactic cosmic rays (GCRs) or the proton synchrotron (PS) pion beam for the ion generation, respectively. The ion effect typically involved an increase in the apparent sulfuric acid concentration by a factor of ~ 2 to 3 and was qualitatively verified by the ion measurements with an atmospheric-pressure interface-time of flight (APi-TOF) mass spectrometer. By applying a high-voltage (HV) clearing field inside the CLOUD chamber, the ion effect on the CIMS measurement was completely eliminated since, under these conditions, small ions are swept from the chamber in about 1 s. In order to exclude the ion effect and to provide corrected sulfuric acid concentrations during the GCR and PS beam nucleation experiments, a parameterisation was derived that utilises the trace gas concentrations and the UV light intensity as input parameters. Atmospheric sulfuric acid measurements with a CIMS showed an insignificant ion effect.
The formation of particles from precursor vapors is an important source of atmospheric aerosol. Research at the Cosmics Leaving OUtdoor Droplets (CLOUD) facility at CERN tries to elucidate which vapors are responsible for this new particle formation, and how in detail it proceeds. Initial measurement campaigns at the CLOUD stainless-steel aerosol chamber focused on investigating particle formation from ammonia (NH3) and sulfuric acid (H2SO4). Experiments were conducted in the presence of water, ozone and sulfur dioxide. Contaminant trace gases were suppressed at the technological limit. For this study, we mapped out the compositions of small NH3-H2SO4 clusters over a wide range of atmospherically relevant environmental conditions. We covered [NH3] in the range from <2 to 1400 pptv, [H2SO4] from 3.3 × 106 to 1.4 × 109 cm−3, and a temperature range from −25 to +20 °C. Negatively and positively charged clusters were directly measured by an atmospheric pressure interface time-of-flight (APi-TOF) mass spectrometer, as they initially formed from gas-phase NH3 and H2SO4, and then grew to larger clusters containing more than 50 molecules of NH3 and H2SO4, corresponding to mobility-equivalent diameters greater than 2 nm. Water molecules evaporate from these clusters during sampling and are not observed. We found that the composition of the NH3-H2SO4 clusters is primarily determined by the ratio of gas-phase concentrations [NH3] / [H2SO4], as well as by temperature. Pure binary H2O-H2SO4 clusters (observed as clusters of only H2SO4) only form at [NH3] / [H2SO4]<0.1 to 1. For larger values of [NH3] / [H2SO4], the composition of NH3-H2SO4 clusters was characterized by the number of NH3 molecules m added for each added H2SO4 molecule n (Δm / Δn), where n is in the range 4–18 (negatively charged clusters) or 1–17 (positively charged clusters). For negatively charged clusters, Δm / Δn saturated between 1 and 1.4 for [NH3] / [H2SO4]>10. Positively charged clusters grew on average by Δm / Δn = 1.05 and were only observed at sufficiently high [NH3] / [H2SO4]. The H2SO4 molecules of these clusters are partially neutralized by NH3, in close resemblance to the acid-base bindings of ammonium bisulfate. Supported by model simulations, we substantiate previous evidence for acid-base reactions being the essential mechanism behind the formation of these clusters under atmospheric conditions and up to sizes of at least 2 nm. Our results also suggest that yet unobservable electrically neutral NH3-H2SO4 clusters grow by generally the same mechanism as ionic clusters, particularly for [NH3] / [H2SO4]>10. We expect that NH3-H2SO4 clusters form and grow also mostly by Δm / Δn>1 in the atmosphere's boundary layer, as [NH3] / [H2SO4] is mostly larger than 10. We compared our results from CLOUD with APi-TOF measurements of NH3-H2SO4 anion clusters during new particle formation in the Finnish boreal forest. However, the exact role of NH3-H2SO4 clusters in boundary layer particle formation remains to be resolved.
The formation of particles from precursor vapors is an important source of atmospheric aerosol. Research at the Cosmics Leaving OUtdoor Droplets (CLOUD) facility at CERN tries to elucidate which vapors are responsible for this new-particle formation, and how in detail it proceeds. Initial measurement campaigns at the CLOUD stainless-steel aerosol chamber focused on investigating particle formation from ammonia (NH3) and sulfuric acid (H2SO4). Experiments were conducted in the presence of water, ozone and sulfur dioxide. Contaminant trace gases were suppressed at the technological limit. For this study, we mapped out the compositions of small NH3–H2SO4 clusters over a wide range of atmospherically relevant environmental conditions. We covered [NH3] in the range from < 2 to 1400 pptv, [H2SO4] from 3.3 × 106 to 1.4 × 109 cm−3 (0.1 to 56 pptv), and a temperature range from −25 to +20 °C. Negatively and positively charged clusters were directly measured by an atmospheric pressure interface time-of-flight (APi-TOF) mass spectrometer, as they initially formed from gas-phase NH3 and H2SO4, and then grew to larger clusters containing more than 50 molecules of NH3 and H2SO4, corresponding to mobility-equivalent diameters greater than 2 nm. Water molecules evaporate from these clusters during sampling and are not observed. We found that the composition of the NH3–H2SO4 clusters is primarily determined by the ratio of gas-phase concentrations [NH3] / [H2SO4], as well as by temperature. Pure binary H2O–H2SO4 clusters (observed as clusters of only H2SO4) only form at [NH3] / [H2SO4] < 0.1 to 1. For larger values of [NH3] / [H2SO4], the composition of NH3–H2SO4 clusters was characterized by the number of NH3 molecules m added for each added H2SO4 molecule n (Δm/Δ n), where n is in the range 4–18 (negatively charged clusters) or 1–17 (positively charged clusters). For negatively charged clusters, Δ m/Δn saturated between 1 and 1.4 for [NH3] / [H2SO4] > 10. Positively charged clusters grew on average by Δm/Δn = 1.05 and were only observed at sufficiently high [NH3] / [H2SO4]. The H2SO4 molecules of these clusters are partially neutralized by NH3, in close resemblance to the acid–base bindings of ammonium bisulfate. Supported by model simulations, we substantiate previous evidence for acid–base reactions being the essential mechanism behind the formation of these clusters under atmospheric conditions and up to sizes of at least 2 nm. Our results also suggest that electrically neutral NH3–H2SO4 clusters, unobservable in this study, have generally the same composition as ionic clusters for [NH3] / [H2SO4] > 10. We expect that NH3–H2SO4 clusters form and grow also mostly by Δm/Δn > 1 in the atmosphere's boundary layer, as [NH3] / [H2SO4] is mostly larger than 10. We compared our results from CLOUD with APi-TOF measurements of NH3–H2SO4 anion clusters during new-particle formation in the Finnish boreal forest. However, the exact role of NH3–H2SO4 clusters in boundary layer particle formation remains to be resolved.
Seven different instruments and measurement methods were used to examine the immersion freezing of bacterial ice nuclei from Snomax® (hereafter Snomax), a product containing ice active protein complexes from non-viable Pseudomonas syringae bacteria. The experimental conditions were kept as similar as possible for the different measurements. Of the participating instruments, some examined droplets which had been made from suspensions directly, and the others examined droplets activated on previously generated Snomax particles, with particle diameters of mostly a few hundred nanometers and up to a few micrometers in some cases. Data were obtained in the temperature range from −2 to −38 °C, and it was found that all ice active protein complexes were already activated above −12 °C. Droplets with different Snomax mass concentrations covering 10 orders of magnitude were examined. Some instruments had very short ice nucleation times down to below 1 s, while others had comparably slow cooling rates around 1 K min−1. Displaying data from the different instruments in terms of numbers of ice active protein complexes per dry mass of Snomax, nm, showed that within their uncertainty the data agree well with each other as well as to previously reported literature results. Two parameterizations were taken from literature for a direct comparison to our results, and these were a time dependent approach based on a contact angle distribution Niedermeier et al. (2014) and a modification of the parameterization presented in Hartmann et~al.~(2013) representing a time independent approach. The agreement between these and the measured data were good, i.e. they agreed within a temperature range of 0.6 K or equivalently a range in nm of a factor of 2. From the results presented herein, we propose that Snomax, at least when carefully shared and prepared, is a suitable material to test and compare different instruments for their accuracy of measuring immersion freezing.
Seven different instruments and measurement methods were used to examine the immersion freezing of bacterial ice nuclei from Snomax® (hereafter Snomax), a product containing ice-active protein complexes from non-viable Pseudomonas syringae bacteria. The experimental conditions were kept as similar as possible for the different measurements. Of the participating instruments, some examined droplets which had been made from suspensions directly, and the others examined droplets activated on previously generated Snomax particles, with particle diameters of mostly a few hundred nanometers and up to a few micrometers in some cases. Data were obtained in the temperature range from −2 to −38 °C, and it was found that all ice-active protein complexes were already activated above −12 °C. Droplets with different Snomax mass concentrations covering 10 orders of magnitude were examined. Some instruments had very short ice nucleation times down to below 1 s, while others had comparably slow cooling rates around 1 K min−1. Displaying data from the different instruments in terms of numbers of ice-active protein complexes per dry mass of Snomax, nm, showed that within their uncertainty, the data agree well with each other as well as to previously reported literature results. Two parameterizations were taken from literature for a direct comparison to our results, and these were a time-dependent approach based on a contact angle distribution (Niedermeier et al., 2014) and a modification of the parameterization presented in Hartmann et al. (2013) representing a time-independent approach. The agreement between these and the measured data were good; i.e., they agreed within a temperature range of 0.6 K or equivalently a range in nm of a factor of 2. From the results presented herein, we propose that Snomax, at least when carefully shared and prepared, is a suitable material to test and compare different instruments for their accuracy of measuring immersion freezing.
Immersion freezing is the most relevant heterogeneous ice nucleation mechanism through which ice crystals are formed in mixed-phase clouds. In recent years, an increasing number of laboratory experiments utilizing a variety of instruments have examined immersion freezing activity of atmospherically relevant ice nucleating particles (INPs). However, an inter-comparison of these laboratory results is a difficult task because investigators have used different ice nucleation (IN) measurement methods to produce these results. A remaining challenge is to explore the sensitivity and accuracy of these techniques and to understand how the IN results are potentially influenced or biased by experimental parameters associated with these techniques.
Within the framework of INUIT (Ice Nucleation research UnIT), we distributed an illite rich sample (illite NX) as a representative surrogate for atmospheric mineral dust particles to investigators to perform immersion freezing experiments using different IN measurement methods and to obtain IN data as a function of particle concentration, temperature (T), cooling rate and nucleation time. Seventeen measurement methods were involved in the data inter-comparison. Experiments with seven instruments started with the test sample pre-suspended in water before cooling, while ten other instruments employed water vapor condensation onto dry-dispersed particles followed by immersion freezing. The resulting comprehensive immersion freezing dataset was evaluated using the ice nucleation active surface-site density (ns) to develop a representative ns(T) spectrum that spans a wide temperature range (−37 °C < T < −11 °C) and covers nine orders of magnitude in ns.
Our inter-comparison results revealed a discrepancy between suspension and dry-dispersed particle measurements for this mineral dust. While the agreement was good below ~ −26 °C, the ice nucleation activity, expressed in ns, was smaller for the wet suspended samples and higher for the dry-dispersed aerosol samples between about −26 and −18 °C. Only instruments making measurement techniques with wet suspended samples were able to measure ice nucleation above −18 °C. A possible explanation for the deviation between −26 and −18 °C is discussed. In general, the seventeen immersion freezing measurement techniques deviate, within the range of about 7 °C in terms of temperature, by three orders of magnitude with respect to ns. In addition, we show evidence that the immersion freezing efficiency (i.e., ns) of illite NX particles is relatively independent on droplet size, particle mass in suspension, particle size and cooling rate during freezing. A strong temperature-dependence and weak time- and size-dependence of immersion freezing efficiency of illite-rich clay mineral particles enabled the ns parameterization solely as a function of temperature. We also characterized the ns (T) spectra, and identified a section with a steep slope between −20 and −27 °C, where a large fraction of active sites of our test dust may trigger immersion freezing. This slope was followed by a region with a gentler slope at temperatures below −27 °C. A multiple exponential distribution fit is expressed as ns(T) = exp(23.82 × exp(−exp(0.16 × (T + 17.49))) + 1.39) based on the specific surface area and ns(T) = exp(25.75 × exp(−exp(0.13 × (T + 17.17))) + 3.34) based on the geometric area (ns and T in m−2 and °C, respectively). These new fits, constrained by using an identical reference samples, will help to compare IN measurement methods that are not included in the present study and, thereby, IN data from future IN instruments.
In this study we show how size-resolved measurements of aerosol particles and cloud condensation nuclei (CCN) can be used to characterize the supersaturation of water vapor in a cloud. The method was developed and applied during the ACRIDICON-Zugspitze campaign (17 September to 4 October 2012) at the high-Alpine research station Schneefernerhaus (German Alps, 2650 m a.s.l.). Number size distributions of total and interstitial aerosol particles were measured with a scanning mobility particle sizer (SMPS), and size-resolved CCN efficiency spectra were recorded with a CCN counter system operated at different supersaturation levels.
During the evolution of a cloud, aerosol particles are exposed to different supersaturation levels. We outline and compare different estimates for the lower and upper bounds (Slow, Shigh) and the average value (Savg) of peak supersaturation encountered by the particles in the cloud. A major advantage of the derivation of Slow and Savg from size-resolved CCN efficiency spectra is that it does not require the specific knowledge or assumptions about aerosol hygroscopicity that are needed to derive estimates of Slow, Shigh, and Savg from aerosol size distribution data. For the investigated cloud event, we derived Slow ≈ 0.07–0.25%, Shigh ≈ 0.86–1.31% and Savg ≈ 0.42–0.68%.
The three-dimensional quantification of small scale processes in the upper troposphere and lower stratosphere is one of the challenges of current atmospheric research and requires the development of new measurement strategies. This work presents first results from the newly developed Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA) obtained during the ESSenCe and TACTS/ESMVal aircraft campaigns. The focus of this work is on the so-called dynamics mode data characterized by a medium spectral and a very high spatial resolution. The retrieval strategy for the derivation of two- and three-dimensional constituent fields in the upper troposphere and lower stratosphere is presented. Uncertainties of the main retrieval targets (temperature, O3, HNO3 and CFC-12) and their spatial resolution are discussed. During ESSenCe, high resolution two-dimensional cross-sections have been obtained. Comparisons to collocated remote-sensing and in-situ data indicate a good agreement between the data sets. During TACTS/ESMVal a tomographic flight pattern to sense an intrusion of stratospheric air deep into the troposphere has been performed. This filament could be reconstructed with an unprecedented spatial resolution of better than 500 m vertically and 20 km × 20 km horizontally.
In the present work, three different techniques are used to separate ice-nucleating particles (INP) and ice particle residuals (IPR) from non-ice-active particles: the Ice Selective Inlet (ISI) and the Ice Counterflow Virtual Impactor (Ice-CVI), which sample ice particles from mixed phase clouds and allow for the analysis of the residuals, as well as the combination of the Fast Ice Nucleus Chamber (FINCH) and the Ice Nuclei Pumped Virtual Impactor (IN-PCVI), which provides ice-activating conditions to aerosol particles and extracts the activated ones for analysis. The collected particles were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis to determine their size, chemical composition and mixing state. Samples were taken during January/February 2013 at the High Alpine Research Station Jungfraujoch. All INP/IPR-separating techniques had considerable abundances (median 20–70%) of contamination artifacts (ISI: Si-O spheres, probably calibration aerosol; Ice-CVI: Al-O particles; FINCH + IN-PCVI: steel particles). Also, potential measurement artifacts (soluble material) occurred (median abundance < 20%). After removal of the contamination particles, silicates and Ca-rich particles, carbonaceous material and metal oxides were the major INP/IPR particle types separated by all three techniques. Minor types include soot and Pb-bearing particles. Sea-salt and sulfates were identified by all three methods as INP/IPR. Lead was identified in less than 10% of the INP/IPR. It was mainly present as an internal mixture with other particle types, but also external lead-rich particles were found. Most samples showed a maximum of the INP/IPR size distribution at 400 nm geometric diameter. In a few cases, a second super-micron maximum was identified. Soot/carbonaceous material and metal oxides were present mainly in the submicron range. ISI and FINCH yielded silicates and Ca-rich particles mainly with diameters above 1 μm, while the Ice-CVI also sampled many submicron particles. Probably owing to the different meteorological conditions, the INP/IPR composition was highly variable on a sample to sample basis. Thus, some part of the discrepancies between the different techniques may result from the (unavoidable) non-parallel sampling. The observed differences of the particles group abundances as well as the mixing state of INP/IPR point to the need of further studies to better understand the influence of the separating techniques on the INP/IPR chemical composition.
In this study we show how size-resolved measurements of aerosol particles and cloud condensation nuclei (CCN) can be used to characterize the supersaturation of water vapor in a cloud. The method was developed and applied for the investigation of a cloud event during the ACRIDICON-Zugspitze campaign (17 September to 4 October 2012) at the high-alpine research station Schneefernerhaus (German Alps, 2650 m a.s.l.). Number size distributions of total and interstitial aerosol particles were measured with a scanning mobility particle sizer (SMPS), and size-resolved CCN efficiency spectra were recorded with a CCN counter system operated at different supersaturation levels.
During the evolution of a cloud, aerosol particles are exposed to different supersaturation levels. We outline and compare different estimates for the lower and upper bounds (Slow, Shigh) and the average value (Savg) of peak supersaturation encountered by the particles in the cloud. For the investigated cloud event, we derived Slow ≈ 0.19–0.25%, Shigh ≈ 0.90–1.64% and Savg ≈ 0.38–0.84%. Estimates of Slow, Shigh and Savg based on aerosol size distribution data require specific knowledge or assumptions of aerosol hygroscopicity, which are not required for the derivation of Slow and Savg from the size-resolved CCN efficiency spectra.
Global warming, changes in the hydrological cycle and enhanced marine primary productivity all have been invoked as having contributed to the occurrence of widespread ocean anoxia during the Cenomanian–Turonian oceanic anoxic event (OAE2; ~94 Ma), but disentangling these factors on a regional scale has remained problematic. In an attempt to separate these forcing factors, we generated palynological and organic geochemical records using a core spanning the OAE2 from Wunstorf, Lower Saxony Basin (LSB; northern Germany), which exhibits cyclic black shale–marl alternations related to the orbital precession cycle.
Despite the widely varying depositional conditions complicating the interpretation of the obtained records, TEX86H indicates that sea-surface temperature (SST) evolution in the LSB during OAE2 resembles that of previously studied sites throughout the proto-North Atlantic. Cooling during the so-called Plenus Cold Event interrupted black shale deposition during the early stages of OAE2. However, TEX86 does not vary significantly across black shale–marl alternations, suggesting that temperature variations did not force the formation of the cyclic black shale horizons. Relative (i.e., with respect to marine palynomorphs) and absolute abundances of pollen and spores are elevated during phases of black shale deposition, indicative of enhanced precipitation and run-off. High abundances of cysts from inferred heterotrophic and euryhaline dinoflagellates supports high run-off, which likely introduced additional nutrients to the epicontinental shelf resulting in elevated marine primary productivity.
We conclude that orbitally forced enhanced precipitation and run-off, in tandem with elevated marine primary productivity, were critical in cyclic black shale formation on the northern European epicontinental shelf and potentially for other OAE2 sections in the proto-Atlantic and Western Interior Seaway at similar latitudes as well.
Global warming, changes in the hydrological cycle and enhanced marine primary productivity all have been invoked to have contributed to the occurrence of widespread ocean anoxia during the Cenomanian-Turonian Oceanic Anoxic Event (OAE2; ~ 94 Ma), but disentangling these factors on a regional scale has remained problematic. We generated palynological and organic geochemical records that allow the separation of these forcing factors in a core spanning the OAE2 from Wunstorf, Lower Saxony Basin (LSB; North Gemany), which exhibits cyclic black shale–marl alternations related to the orbital precession cycle.
Despite the widely varying depositional conditions complicating the interpretation of the obtained records, TEX86H indicates that sea-surface temperature (SST) evolution in the LSB during OAE2 resembles that of previously studied sites throughout the proto-North Atlantic. Cooling during the so-called Plenus Cold Event interrupted black shale deposition during the early stages of OAE2. However, TEX86 does not vary significantly across marl–black shale alternations, suggesting that temperature variations did not force the formation of the cyclic black shale horizons. Relative (i.e., with respect to marine palynomorphs) and absolute abundances of pollen and spores are elevated during phases of black shale deposition, indicative of enhanced precipitation and run-off. High abundances of cysts from inferred heterotrophic and euryhaline dinoflagellates supports high run-off, which likely introduced additional nutrients to the epicontinental shelf resulting in elevated marine primary productivity.
We conclude that orbitally-forced enhanced precipitation and run-off, in tandem with elevated marine primary productivity, were critical in cyclic black shale formation on the northwest European epicontinental shelf and potentially for other OAE2 sections in the proto-Atlantic and Western Interior Seaway at similar latitudes as well.
The Tarim River basin, located in Xinjiang, NW China, is the largest endorheic river basin in China and one of the largest in all of Central Asia. Due to the extremely arid climate, with an annual precipitation of less than 100 mm, the water supply along the Aksu and Tarim rivers solely depends on river water. This is linked to anthropogenic activities (e.g., agriculture) and natural and semi-natural ecosystems as both compete for water. The ongoing increase in water consumption by agriculture and other human activities in this region has been enhancing the competition for water between human needs and nature. Against this background, 11 German and 6 Chinese universities and research institutes have formed the consortium SuMaRiO (Sustainable Management of River Oases along the Tarim River; http://www.sumario.de), which aims to create a holistic picture of the availability of water resources in the Tarim River basin and the impacts on anthropogenic activities and natural ecosystems caused by the water distribution within the Tarim River basin. On the basis of the results from field studies and modeling approaches as well as from suggestions by the relevant regional stakeholders, a decision support tool (DST) will be implemented that will then assist stakeholders in balancing the competition for water, acknowledging the major external effects of water allocation to agriculture and to natural ecosystems. This consortium was formed in 2011 and is funded by the German Federal Ministry of Education and Research. As the data collection phase was finished this year, the paper presented here brings together the results from the fields from the disciplines of climate modeling, cryology, hydrology, agricultural sciences, ecology, geoinformatics, and social sciences in order to present a comprehensive picture of the effects of different water availability schemes on anthropogenic activities and natural ecosystems along the Tarim River. The second objective is to present the project structure of the whole consortium, the current status of work (i.e., major new results and findings), explain the foundation of the decision support tool as a key product of this project, and conclude with application recommendations for the region. The discharge of the Aksu River, which is the major tributary of the Tarim, has been increasing over the past 6 decades. From 1989 to 2011, agricultural area more than doubled: cotton became the major crop and there was a shift from small-scale to large-scale intensive farming. The ongoing increase in irrigated agricultural land leads to the increased threat of salinization and soil degradation caused by increased evapotranspiration. Aside from agricultural land, the major natural and semi-natural ecosystems are riparian (Tugai) forests, shrub vegetation, reed beds, and other grassland, as well as urban and peri-urban vegetation. Within the SuMaRiO cluster, focus has been set on the Tugai forests, with Populus euphratica as the dominant tree species, because these forests belong to the most productive and species-rich natural ecosystems of the Tarim River basin. At sites close to the groundwater, the annual stem diameter increments of Populus euphratica correlated with the river runoffs of the previous year. However, the natural river dynamics cease along the downstream course and thus hamper the recruitment of Populus euphratica. A study on the willingness to pay for the conservation of the natural ecosystems was conducted to estimate the concern of the people in the region and in China's capital. These household surveys revealed that there is a considerable willingness to pay for conservation of the natural ecosystems, with mitigation of dust and sandstorms considered the most important ecosystem service. Stakeholder dialogues contributed to creating a scientific basis for a sustainable management in the future.
The Tarim River Basin, located in Xinjiang, NW China, is the largest endorheic river basin of China and one of the largest in whole Central Asia. Due to the extremely arid climate with an annual precipitation of less than 100 mm, the water supply along the Aksu and Tarim River solely depends on river water. This applies for anthropogenic activities (e.g. agriculture) as well as for the natural ecosystems so that both compete for water. The on-going increase of water consumption by agriculture and other human activities in this region has been enhancing the competition for water between human needs and nature. Against this background, 11 German and 6 Chinese universities and research institutes formed the consortium SuMaRiO (www.sumario.de), which aims at gaining a holistic picture of the availability of water resources in the Tarim River Basin and the impacts on anthropogenic activities and natural ecosystems caused by the water distribution within the Tarim River Basin. The discharge of the Aksu River, which is the major tributary to the Tarim, has been increasing over the past 6 decades due to enhanced glacier melt. Alone from 1989 to 2011, the area under agriculture more than doubled. Thereby, cotton became the major crop and there was a shift from small-scale farming to large-scale intensive farming. The major natural ecosystems along the Aksu and Tarim River are riparian ecosystems: Riparian (Tugai) forests, shrub vegetation, reed beds, and other grassland. Within the SuMaRiO Cluster the focus was laid on the Tugai forests, with Populus euphratica as dominant tree, because the most productive and species-rich natural ecosystems can be found among those forests. On sites with groundwater distance of less than 7.5 m the annual increments correlated with river runoffs of the previous year. But, the further downstream along the Tarim River, the more the natural river dynamics ceased, which impacts on the recruitment of Populus euphratica. Household surveys revealed that there is a considerable willingness to pay for conservation of those riparian forests with the mitigation of dust and sandstorms considered as the most important ecosystem service. This interdisciplinary project will result in a decision support tool (DST), build on the participation of regional stakeholders and models based on results and field experiments. This DST finally shall assist stakeholders in balancing the water competition acknowledging the major external effects of any water allocation.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2014)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulfuric acid. However, the activation process of sulfuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulfuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products, in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilised Criegee intermediates (sCI). This novel laboratory-derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during night-time. Because the RO2 lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should be taken into account when studying the impact of new particles in climate feedback cycles.
We present the application of Time-of-Flight Mass Spectrometry (TOF MS) for the analysis of halocarbons in the atmosphere, after cryogenic sample preconcentration and gas chromatographic separation. For the described field of application, the Quadrupole Mass Spectrometer (QP MS) is the state-of-the-art detector. This work aims at comparing two commercially available instruments, a QP MS and a TOF MS with respect to mass resolution, mass accuracy, sensitivity, measurement precision and detector linearity. Both mass spectrometers are operated on the same gas chromatographic system by splitting the column effluent to both detectors. The QP MS had to be operated in optimised Single Ion Monitoring (SIM) mode to achieve a sensitivity which could compete with the TOF MS. The TOF MS provided full mass range information in any acquired mass spectrum without losing sensitivity. Whilst the QP MS showed the performance already achieved in earlier tests, the sensitivity of the TOF MS was on average higher than that of the QP MS in the "operational" SIM mode by a factor of up to 3 reaching detection limits of less than 0.2 pg. Measurement precision determined for the whole analytical system was up to 0.2% depending on substance and sampled volume. The TOF MS instrument used for this study displayed significant non-linearities of up to 10% for two third of all analysed substances.
Immersion freezing is the most relevant heterogeneous ice nucleation mechanism through which ice crystals are formed in mixed-phase clouds. In recent years, an increasing number of laboratory experiments utilizing a variety of instruments have examined immersion freezing activity of atmospherically relevant ice-nucleating particles. However, an intercomparison of these laboratory results is a difficult task because investigators have used different ice nucleation (IN) measurement methods to produce these results. A remaining challenge is to explore the sensitivity and accuracy of these techniques and to understand how the IN results are potentially influenced or biased by experimental parameters associated with these techniques.
Within the framework of INUIT (Ice Nuclei Research Unit), we distributed an illite-rich sample (illite NX) as a representative surrogate for atmospheric mineral dust particles to investigators to perform immersion freezing experiments using different IN measurement methods and to obtain IN data as a function of particle concentration, temperature (T), cooling rate and nucleation time. A total of 17 measurement methods were involved in the data intercomparison. Experiments with seven instruments started with the test sample pre-suspended in water before cooling, while 10 other instruments employed water vapor condensation onto dry-dispersed particles followed by immersion freezing. The resulting comprehensive immersion freezing data set was evaluated using the ice nucleation active surface-site density, ns, to develop a representative ns(T) spectrum that spans a wide temperature range (−37 °C < T < −11 °C) and covers 9 orders of magnitude in ns.
In general, the 17 immersion freezing measurement techniques deviate, within a range of about 8 °C in terms of temperature, by 3 orders of magnitude with respect to ns. In addition, we show evidence that the immersion freezing efficiency expressed in ns of illite NX particles is relatively independent of droplet size, particle mass in suspension, particle size and cooling rate during freezing. A strong temperature dependence and weak time and size dependence of the immersion freezing efficiency of illite-rich clay mineral particles enabled the ns parameterization solely as a function of temperature. We also characterized the ns(T) spectra and identified a section with a steep slope between −20 and −27 °C, where a large fraction of active sites of our test dust may trigger immersion freezing. This slope was followed by a region with a gentler slope at temperatures below −27 °C. While the agreement between different instruments was reasonable below ~ −27 °C, there seemed to be a different trend in the temperature-dependent ice nucleation activity from the suspension and dry-dispersed particle measurements for this mineral dust, in particular at higher temperatures. For instance, the ice nucleation activity expressed in ns was smaller for the average of the wet suspended samples and higher for the average of the dry-dispersed aerosol samples between about −27 and −18 °C. Only instruments making measurements with wet suspended samples were able to measure ice nucleation above −18 °C. A possible explanation for the deviation between −27 and −18 °C is discussed. Multiple exponential distribution fits in both linear and log space for both specific surface area-based ns(T) and geometric surface area-based ns(T) are provided. These new fits, constrained by using identical reference samples, will help to compare IN measurement methods that are not included in the present study and IN data from future IN instruments.
This paper presents results from the "INUIT-JFJ/CLACE 2013" field campaign at the high alpine research station Jungfraujoch in January/February 2013. The chemical composition of ice particle residuals (IPR) in a size diameter range of 200–900 nm was measured in orographic, convective and non-convective clouds with a single particle mass spectrometer (ALABAMA) under ambient conditions characterized by temperatures between −28 and −4 °C and wind speed from 0.1 to 21 km h−1. Additionally, background aerosol particles in cloud free air were investigated. The IPR were sampled from mixed-phase clouds with two inlets which selectively extract small ice crystals in-cloud, namely the Counterflow Virtual Impactor (Ice-CVI) and the Ice Selective Inlet (ISI). The IPR as well as the aerosol particles were classified into seven different particle types: (1) black carbon, (2) organic carbon, (3) black carbon internally mixed with organic carbon, (4) minerals, (5) one particle group (termed "BioMinSal") that may contain biological particles, minerals, or salts, (6) industrial metals, and (7) lead containing particles. For any sampled particle population it was determined by means of single particle mass spectrometer how many of the analyzed particles belonged to each of these categories. Accordingly, between 20 and 30% of the IPR and roughly 42% of the background particles contained organic carbon. The measured fractions of minerals in the IPR composition varied from 6 to 33%, while the values for the "BioMinSal" group were between 15 and 29%. Four percent to 31% of the IPR contained organic carbon mixed with black carbon. Both inlets delivered similar results of the chemical composition and of the particle size distribution, although lead was found only in the IPR sampled by the Ice-CVI. The results show that the ice particle residual composition varies substantially between different cloud events, which indicates the influence of different meteorological conditions, such as origin of the air masses, temperature and wind speed.
Irrigation intensifies land use by increasing crop yield but also impacts water resources. It affects water and energy balances and consequently the microclimate in irrigated regions. Therefore, knowledge of the extent of irrigated land is important for hydrological and crop modelling, global change research, and assessments of resource use and management. Information on the historical evolution of irrigated lands is limited. The new global historical irrigation data set (HID) provides estimates of the temporal development of the area equipped for irrigation (AEI) between 1900 and 2005 at 5 arcmin resolution. We collected sub-national irrigation statistics from various sources and found that the global extent of AEI increased from 63 million ha (Mha) in 1900 to 111 Mha in 1950 and 306 Mha in 2005. We developed eight gridded versions of time series of AEI by combining sub-national irrigation statistics with different data sets on the historical extent of cropland and pasture. Different rules were applied to maximize consistency of the gridded products to sub-national irrigation statistics or to historical cropland and pasture data sets. The HID reflects very well the spatial patterns of irrigated land as shown on historical maps for the western United States (around year 1900) and on a global map (around year 1960). Mean aridity on irrigated land increased and mean natural river discharge on irrigated land decreased from 1900 to 1950 whereas aridity decreased and river discharge remained approximately constant from 1950 to 2005. The data set and its documentation are made available in an open-data repository at https://mygeohub.org/publications/8 (doi:10.13019/M20599).
During January/February 2013, at the High Alpine Research Station Jungfraujoch a measurement campaign was carried out, which was centered on atmospheric ice-nucleating particles (INP) and ice particle residuals (IPR). Three different techniques for separation of INP and IPR from the non-ice-active particles are compared. The Ice Selective Inlet (ISI) and the Ice Counterflow Virtual Impactor (Ice-CVI) sample ice particles from mixed phase clouds and allow for the analysis of the residuals. The combination of the Fast Ice Nucleus Chamber (FINCH) and the Ice Nuclei Pumped Counterflow Virtual Impactor (IN-PCVI) provides ice-activating conditions to aerosol particles and extracts the activated INP for analysis.Collected particles were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis to determine size, chemical composition and mixing state. All INP/IPR-separating techniques had considerable abundances (median 20 – 70 %) of instrumental contamination artifacts (ISI: Si-O spheres, probably calibration aerosol; Ice-CVI: Al-O particles; FINCH+IN-PCVI: steel particles). Also, potential sampling artifacts (e.g., pure soluble material) occurred with a median abundance of < 20 %. While these could be explained as IPR by ice break-up, for INP their IN-ability pathway is less clear. After removal of the contamination artifacts, silicates and Ca-rich particles, carbonaceous material and metal oxides were the major INP/IPR particle types separated by all three techniques. Soot was a minor contributor. Lead was detected in less than 10 % of the particles, of which the majority were internal mixtures with other particle types. Sea-salt and sulfates were identified by all three methods as INP/IPR. Most samples showed a maximum of the INP/IPR size distribution at 400 nm geometric diameter. In a few cases, a second super-micron maximum was identified. Soot/carbonaceous material and metal oxides were present mainly in the submicron range. ISI and FINCH yielded silicates and Ca-rich particles mainly with diameters above 1 μm, while the Ice-CVI also separated many submicron IPR. As strictly parallel sampling could not be performed, a part of the discrepancies between the different techniques may result from variations in meteorological conditions and subsequent INP/IPR composition. The observed differences in the particle group abundances as well as in the mixing state of INP/IPR express the need for further studies to better understand the influence of the separating techniques on the INP/IPR chemical
composition.
Global warming, changes in the hydrological cycle and enhanced marine primary productivity all have been invoked to have contributed to the occurrence of widespread ocean anoxia during the Cenomanian-Turonian Oceanic Anoxic Event (OAE2; ~ 94 Ma), but disentangling these factors on a regional scale has remained problematic. We generated palynological and organic geochemical records that allow the separation of these forcing factors in a core spanning the OAE2 from Wunstorf, Lower Saxony Basin (LSB; North Gemany), which exhibits cyclic black shale–marl alternations related to the orbital precession cycle.
Despite the widely varying depositional conditions complicating the interpretation of the obtained records, TEX86H indicates that sea-surface temperature (SST) evolution in the LSB during OAE2 resembles that of previously studied sites throughout the proto-North Atlantic. Cooling during the so-called Plenus Cold Event interrupted black shale deposition during the early stages of OAE2. However, TEX86 does not vary significantly across marl–black shale alternations, suggesting that temperature variations did not force the formation of the cyclic black shale horizons. Relative (i.e., with respect to marine palynomorphs) and absolute abundances of pollen and spores are elevated during phases of black shale deposition, indicative of enhanced precipitation and run-off. High abundances of cysts from inferred heterotrophic and euryhaline dinoflagellates supports high run-off, which likely introduced additional nutrients to the epicontinental shelf resulting in elevated marine primary productivity.
We conclude that orbitally-forced enhanced precipitation and run-off, in tandem with elevated marine primary productivity, were critical in cyclic black shale formation on the northwest European epicontinental shelf and potentially for other OAE2 sections in the proto-Atlantic and Western Interior Seaway at similar latitudes as well.
The Late Cretaceous is known to be mostly affected by warm periods interrupted temporarily by a number of cooling events. The reconstruction of the paleoclimatic conditions during a period of high concentration of CO2 in the atmosphere is of great importance for the creation of future climate models. We applied the recently developed method reconstructing the SST from the TEX86 (TetraEther indeX of tetraethers consisting of 86 carbon atoms).
The sample material used for the present study was obtained from the tropical Late Cretaceous southern Tethys upwelling system (Negev/Israel), lasting from the Late Santonian to the Early Maastrichtian (~ 85 to 68 Ma). On the core samples from the Shefela basin, representing the outer belt of the upwelling system and the outcrop profile from the open mine Mishor Rotem (Efe Syncline), representing the inner belt, various bulk geochemical and biomarker studies were performed in this thesis.
Derived from TEX86 data, a significant long-term SST cooling trend from 36.0 to 29.3 °C is recognized during the Late Santonian and the Early Campanian in the southern Tethys margin. This is consistent with the opening and deepening of the Equatorial Atlantic Gateway (EAG) and the intrusion of cooler deep water from the southern Atlantic Ocean influencing the global SSTs and also the Tethys Ocean. Furthermore, the cooler near shore SST usually found in modern upwelling systems could be verified in case of the ancient upwelling system investigated in the present study. The calculated mean SST in the inner belt (27.7 °C) represented in the Efe Syncline was 1.5 °C cooler in comparison to the more seaward located outer belt (Shefela basin).
Moreover, geochemical and biomarker analyses were used to identify both the accumulation of high amounts of phosphate in the PM and good preservation of organic matter (OM) in the lower part of the OSM section. Total organic carbon (TOC) contents are highly variable over the whole profile reaching from 0.6 % in the MM, to 24.5 % in the OSM. Total iron (TFe) varies from 0.1 % in the PM to 3.3 % in the OSM and total sulfur (TS) varies between 0.1 % in the MM and 3.4 % in the OSM. Different correlations of TS, TOC and TFe were used to identify the conditions during the deposition of the different facies types. Natural sulfurization was found to play a key role in the preservation of the OM particularly in the lower part of the OSM. Samples from the OSM and the PM were deposited under dysoxic to anoxic conditions and iron limitation lasted during the deposition of the OSM and the PM, which effected the incorporation of sulfur into OM.
Phosphorus is highly accumulated in the sediments of the PM with a mean proportion of 11.5 % total phosphorus (TP), which is drastically reduced to a mean value of 0.9 % in the OSM and the MM. From the correlation of the bulk geochemical parameters TOC/TOCOR ratio and TP a major contribution of sulfate reducing bacteria to the phosphate deposition is concluded. This interrelation has previously been investigated in recent coastal upwelling systems off Peru, Chile, California and Namibia. This was further supported by the analysis of branched and monounsaturated fatty acids indicating the occurrence of sulfate reducing and sulfide oxidizing bacteria during the deposition.
According to the results from the analysis of n-alkanes and C27- to C29-steranes up to 95 % of the OM was of marine origin.
Organic sulfur compounds (OSC) were a major compound class in the aromatic hydrocarbon fraction and n-Alkyl and isoprenoid thiophenes were the most abundant, with highest amounts found for 2-methyl-5-tridecyl-thiophene (28 µg/g TOC). The relatively high abundance of ββ-C35 hopanoid thiophenes and epithiosteranes is equivalent to an incorporation of sulfur during the early stages of diagenesis.
Moreover, the geochemical parameters δ13Corg, δ15Norg, C/N and the pristane/phytane (Pr/Ph) ratio, were studied for reconstruction of seafloor and water column depositional environments. The high C/N ratio along with relatively low values of δ15Norg (4 ‰ to 6 ‰) and δ13Corg (-29 ‰ to -28 ‰) are consistent with a significant preferential loss of nitrogen-rich organic compounds during diagenesis. Oxygen-depleted conditions lasted during the deposition of the PM and the bottom of the OSM, reflected by the low Pr/Ph ratio of 0.11–0.7. In the upper part of the OSM and the MM the conditions changed from anoxic to dysoxic or oxic conditions. This environmental trend is consistent with co-occurring foraminiferal assemblages in the studied succession and implies that the benthic species in the Negev sequence were adapted to persistent minimum oxygen conditions by performing complete denitrification as recently found in many modern benthic foraminifera.
Furthermore, the anammox process could have influenced the nitrogen composition of the sediments. In this anaerobically process nitrite and ammonia are converted to molecular nitrogen.
Background: The presence of the recently introduced primary dengue virus vector mosquito Aedes aegypti in Nepal, in association with the likely indigenous secondary vector Aedes albopictus, raises public health concerns. Chikungunya fever cases have also been reported in Nepal, and the virus causing this disease is also transmitted by these mosquito species. Here we report the results of a study on the risk factors for the presence of chikungunya and dengue virus vectors, their elevational ceiling of distribution, and climatic determinants of their abundance in central Nepal.
Methodology/Principal findings: We collected immature stages of mosquitoes during six monthly cross-sectional surveys covering six administrative districts along an altitudinal transect in central Nepal that extended from Birgunj (80 m above sea level [asl]) to Dhunche (highest altitude sampled: 2,100 m asl). The dengue vectors Ae. aegypti and Ae. albopictus were commonly found up to 1,350 m asl in Kathmandu valley and were present but rarely found from 1,750 to 2,100 m asl in Dhunche. The lymphatic filariasis vector Culex quinquefasciatus was commonly found throughout the study transect. Physiographic region, month of collection, collection station and container type were significant predictors of the occurrence and co-occurrence of Ae. aegypti and Ae. albopictus. The climatic variables rainfall, temperature, and relative humidity were significant predictors of chikungunya and dengue virus vectors abundance.
Conclusions/Significance: We conclude that chikungunya and dengue virus vectors have already established their populations up to the High Mountain region of Nepal and that this may be attributed to the environmental and climate change that has been observed over the decades in Nepal. The rapid expansion of the distribution of these important disease vectors in the High Mountain region, previously considered to be non-endemic for dengue and chikungunya fever, calls for urgent actions to protect the health of local people and tourists travelling in the central Himalayas.
Das Thema dieser Arbeit war die Untersuchung der natürlichen Variationen von den zwei primordialen Uranisotopen (238U und 235U) mit einem Schwerpunkt auf Proben, die (1) die kontinentale Kruste und ihre Verwitterungsprodukte (d.h. Granite, Shales und Flusswasser) repräsentieren, (2) Produkte der hydrothermalen Alteration vom mittelozeanischen Rücken widerspiegeln (d.h. alterierte Basalte, Karbonatgänge und hydrothermales Wasser) und (3) aus abgegrenzten euxinischen Becken (d.h. Proben aus der Wassersäule und den dazugehörigen Sedimenten) stammen. Das allgemeine Ziel war das Verständnis, unter welchen Bedingungen und Mechanismen eine Fraktionierung der zwei häufigsten Uranisotope (238U und 235U) in der Natur erfolgt, zu verbessern.
Die untersuchten Haupt- und Nebenflüsse unterscheiden sich sowohl in Ihrer Urankonzentration (c(U)) als auch in Ihrer Uranisotopenzusammensetzung (δ238U), wobei die Nebenflüsse eine geringere Urankonzentration (0.87 nmol/kg bis 3.08 nmol/kg) und eine schwerere Uranisotopenzusammensetzung aufweisen (-0.29 ‰ bis +0.01 ‰ im δ238U) im Vergleich zu den Hauptflüssen (c(U) = 5.19 nmol/kg bis 11.69 nmol/kg und d238U = -0.31 ‰ bis +0.13 ‰) aufweisen. Die untersuchten Gesteinsproben fallen alle in einen recht schmalen Bereich von δ238U, zwischen -0.45 ‰ und -0.21 ‰, mit einem Durchschnittswert von -0.30 ‰ ± 0.04 ‰ (doppelte Standardabweichung). Deren Uranisotopenvariationen sind unabhängig von der Urankonzentration (11.8 µg/g bis 1.3 µg/g), dem Alter (3.80 Ga bis 328 Ma), der Probenlokalität und Grad der Differenzierung. Basierend auf den Ergebnissen der Hauptflüsse, die die Uranhauptquelle für den Ozean darstellen, schlagen wir für zukünftige Berechnungen in der Massenbilanz des Urans einen neuen Wert als beste Abschätzung für die Quelle des Urans im Ozean vor, δ238U = -0.23 ‰.
Die Produkte der hydrothermalen Alteration, alterierte Basalte und Kalziumkarbonatgänge, zeigten etwas stärkere Isotopenvariationen (δ238U zwischen -0.63 ‰ und +0.27 ‰) als erwartet und die hydrothermalen Fluide wiesen eine etwas leichtere Uranisotopenzusammensetzung als Meerwasser ((-0.43 ± 0.25) ‰ vs. (-0.37 ± 0.03) ‰) auf. Diese Ergebnisse sind in Übereinstimmung mit einem Modell, dass annimmt, dass die beobachtete Isotopenfraktionierung hauptsächlich ein Ergebnis von Redoxprozessen ist, z.B. die partielle Reduktion von löslichem UVI aus dem Meerwasser während der hydrothermalen Alteration, was zu einer Anreicherung der schweren Uranisotope in der reduzierten Uranspezies (UIV) führt und 2) das bevorzugte Entfernen von UIV aus den hydrothermalen Fluid und der Einbau in die alterierte ozeanische Kruste. Durch diesen Prozess wird das hydrothermale Fluid an schweren Uranisotopen verarmt und somit würden auch die alterierten Basalte und Karbonate ein niedriges δ238U aufweisen, wenn sie mit dem isotopisch leichten hydrothermalen Fluid in Kontakt gekommen sind.
Die Untersuchung von Wasser- und Sedimentproben aus der Ostsee und dem anoxischen Kyllaren Fjord (Norwegen) auf deren Uran- und Mo-Isotopenzusammensetzung zeigte, dass die Uranisotopenzusammensetzung der Sedimente abhängt von (1) dem Ausmaß des Uranaustrags aus der Wassersäule (in einer ähnlichen Art und Weise wie bei den Molybdänisotopen) und (2) der Sedimentationsrate, d.h. der Fraktion von authigenem- relativ zum dedritischen Uran in den Sedimenten. Aufgrund der hohen Sedimentationsrate zeigen die Sedimente aus dem Kyllaren Fjord nur eine moderate authigene Urananreicherung und eine leichtere Uranisotopenzusammensetzung als Sedimente aus dem Schwarzen Meer. In den anoxischen Becken der Ostsee erfolgt dagegen eine starke Mo- und schwache U-Isotopenfraktionierung zwischen Wasser und Sediment. Durch die regelmäßigen auftretenden Spülereignisse mit sauerstoffreichem Wasser wurden vermutlich die ursprünglichen anoxischen Mo- und U-Isotopensignaturen der Sedimente verändert. Demzufolge müssen die Sedimente durchgehend anoxischen Bedingungen ausgesetzt sein, um eine Mo- und U-Isotopensignatur von den Redoxbedingungen während der Ablagerungen zu speichern.
Der Vergleich zwischen Molybdän- und Uranisotopen in der Ostsee und dem anoxischen Kyllaren Fjord zeigte, dass sich Uran- und Molybdänisotope in stark euxinischen Wassersäulen (c(H2S) > 11 µmol/L) entgegengesetzt verhalten. Dementsprechend ergänzen sich die beiden Isotopensysteme und können genutzt werden, um die Ablagerungsbedingungen in abgeschlossenen Becken und die Redoxentwicklung des Paläoozeans zu untersuchen.
The Sahel has been the focus of scientific interest in environmental-human dynamics and interactions. The objective of the present study is to contribute to the recent debate on the re-greening of Sahel. The paper examines the dynamics of barren land in the Sahel of Burkina Faso through analysis of remotely-sensed and rainfall data from 1975–2011. Discussions with farmers and land management staff have helped to understand the anthropogenic efforts toward soil restoration to enable the subsistence farming agriculture. Results showed that area of barren land has been fluctuating during the study period with approximately 10-year cyclicity. Similarly, rainfall, both at national and local levels has followed the same trends. The trends of the area of barren land and rainfall variability suggest that when rainfall increases, the area of barren land decreases and barren land increases when rainfall decreases. This implies that rainfall is one of the main factors driving the change in area of barren land. In addition, humans have contributed positively and negatively to the change by restoring barren lands for agriculture using locally known techniques and by accelerating land degradation through intensive and inappropriate land use practices.
Die Anwendung der WKB-Theorie zur Simulation der schwach nichtlinearen Dynamik von Schwerewellen
(2014)
Es ist schon seit Längerem bekannt, dass Schwerewellen die Zirkulation der mittleren Atmosphäre beeinflussen. Sie werden fast ausschließlich in der Troposphäre durch Prozesse wie Gebirgsüberströmung, Konvektionen, Frontogenese etc. erzeugt. Sie propagieren von ihrem Entstehungsort in der Troposphäre in die höheren Schichten der Atmosphäre und transportieren dabei ihre Energie und ihren Impuls. Unter der Voraussetzung, dass die Energie von Schwerewellen erhalten bleibt und die Dichte der Atmosphäre mit der Höhe exponentiell abnimmt, wächst die Amplitude der Schwerewellen so stark an, dass sie brechen und ihren Impuls in Stratosphäre und Mesosphäre deponieren. Als Folge davon beeinflussen Schwerewellen die großräumige Zirkulation der Atmosphäre und sind damit ein wichtiges Bindeglied, welches die Troposphäre mit anderen Atmosphärenbereichen verbindet. Folglich ist es wichtig, dass die Klima- und Wettermodelle in der Lage sind, die Schwerewellendynamik zu beschreiben. Bedauerlicherweise können diese Modelle nicht das komplette Schwerewellenspektrum auflösen. Somit müssen Schwerewellen in den Modellen parametrisiert werden. Viele Parametrisierungsschemen basieren auf Wentzel-Kramer-Brillouin(WKB)-Theorie. Die WKB-Gleichungen, die sogenannten Strahlengleichungen, beschreiben die räumliche und zeitliche Variation der Welleneigenschaften wie Wellenzahl, Wellenamplitude und Wellenfrequenz entlang der Charakteristiken, welche durch die lokale Gruppengeschwindigkeit vorgegeben sind. Die numerische Modelle, die auf den Strahlengleichungen basieren, werden als Strahlenmodelle bezeichnet. In Strahlenmodellen werden Schwerewellen durch Wellenteilchen dargestellt. Zur Zeit verwenden die Strahlenmodelle stationäre Strahlengleichungen, da die Wechselwirkung eines zeitabhängigen Schwerewellenfeldes mit einem zeit- und ortsabhängigen Hintergrund zu Problemen in Strahlenmodellen führen kann. Die Strahlengleichungen basieren auf der Annahme, dass sich nie zwei Wellenteilchen mit den unterschiedlichen Welleneigenschaften an einer Position befinden können. Wenn an einer Position zwei Wellenteilchen mit den unterschiedlichen Wellenzahlen befinden, entsteht sogenannte Kaustik: ein Punkt im Raum, an dem sich mehrere Charakteristiken kreuzen. Wenn eine Kaustik entsteht, kann die Wellenamplitude nicht mehr bestimmt werden. Ziel der vorliegenden Arbeit ist es mithilfe der WKB-Theorie die Ausbreitung von Schwerewellenpaketen in einer raum- und zeitabhängigen Hintergrundströmung zu beschreiben und ein numerisches Modell zu entwickeln, welches die Schwerewellen parametrisieren und ihre Wechselwirkung mit der raum- und zeitabhängigen Hintergrundströmung beschreiben kann.
Einfachheitshalber wird in dieser Arbeit nur die Wechselwirkung zwischen horizontal periodischen, vertikal lokalisierten Schwerewellenpaketen und der raum- und zeitabhängigen Hintergrundströmung betrachtet.
Interpretation magnetotellurischer Messungen auf Island und 3D-Modellierungen des Island-Plumes
(2014)
Die Lage und der geologische Aufbau Islands sind eine einmalige geologische und geophysikalische Besonderheit - nur hier liegt der Mittelatlantische Rücken deutlich oberhalb des Meeresspiegels. Eine Theorie ist, dass unter Island ein sogenannter Hotspot existiert - ein aufsteigender Mantelplume (oder eine andere Temperatur- und Schmelzanomalie). Das bedeutet, dass die Tektonik, die Petrologie und die (geo)physikalischen Parameter von der Wechselwirkung der Meeresbodenspreizung mit dem aufsteigenden Mantelplume bestimmt werden. Die magnetotellurischen Untersuchungen auf Island und die magnetotellurischen Modelle der vorliegenden Arbeit lassen sich nach Zieltiefen unterteilen. Im ersten Teil steht vor allem die Untersuchung der Leitfähigkeitsstruktur des oberen Erdmantels im Vordergrund, wobei der Schwerpunkt auf Modellstudien liegt. Hier wird die Theorie des aufsteigenden Mantelplumes aufgegriffen und hinsichtlich der Möglichkeiten der Magnetotellurik (MT) diesen zu detektieren, untersucht. In dieser Arbeit werden deshalb verschiedene synthetische 3D-Modelle untersucht. Diese sollen klären, unter welchen Bedingungen, d.h. bei welcher Tiefenlage, Ausdehnung und Leitfähigkeit, ein Mantelplume in der Magnetotellurik messbare Signale liefert. Da Temperatur und Schmelzanteil hierbei eine entscheidende Rolle spielen, werden auch Ergebnisse von geodynamischen Modellierungen verwendet. Die verschiedenen Modellierungen machen deutlich, dass der Plume in Modellen mit maximal 1% Schmelzanteil nur sehr schlecht mit der MT aufgelöst werden kann. Ein weiteres Problem ist die relativ geringe laterale Ausdehnung des Bereichs hoher Leitfähigkeit. Insbesondere bei Berücksichtigung des Krustenleiters liegen die Effekte des Plumes im Bereich der Messfehler bei realen Daten. Erst bei 3% Schmelzanteil im Plume ergeben sich Charakteristiken in den Sondierungskurven, die eindeutig dem Plume zugeordnet werden können. Im zweiten Teil liegt das Augenmerk auf der Leitfähigkeitsstruktur der isländischen Kruste, für deren Untersuchung ca. 200 Datensätze aus zahlreichen deutsch-isländischen Messkampagnen zur Verfügung stehen. In dieser Arbeit werden sie ganzheitlich ausgewertet und interpretiert. Hier steht im Speziellen der in verschiedenen früheren Untersuchungen gefundene gute Leiter in ca. 10 km Tiefe im Vordergrund. Seine Ausdehnung, Tiefenlage und Leitfähigkeit sowie laterale Änderungen werden genauer untersucht. Dazu werden aus den gemessenen Daten und den daraus ermittelten magnetotellurischen Impedanztensoren nicht nur die Sondierungskurven, sondern weitere Parameter wie Phasentensoren und Rotationsinvarianten abgeleitet und diskutiert. Um einen Überblick über die räumliche Verteilung der Untergrundstrukturen zu erhalten, werden die einzelnen Messpunkte charakterisiert und Stationen mit ähnlichem Verhalten in Gruppen zusammengefasst. 1D- und 2D- Inversionsmodelle liefern einen direkten Hinweis auf die Leitfähigkeitsverteilung. Diese zeigt ausgeprägte laterale Änderungen. Aus den 2D-Modellen ergeben sich Hinweise, die darauf schließen lassen, dass diese Zone niedrigen Widerstands nicht durchgängig oder geschlossen sein muss, um die gemessenen Daten zu erklären. Der gute Leiter scheint weniger mit der Aufwölbung durch den vermuteten Mantelplume oder eine andere tiefer liegende Schmelzanomalie korreliert zu sein. Die lateralen und vertikalen Variationen lassen auf einen Zusammenhang mit den Vulkansystemen auf Island schließen. Darauf deuten auch die Induktionsvektoren hin, die lateral betrachtet stark variieren. Ein weiteres Ergebnis ist das Fehlen dieses Krustenleiters in einem mindestens 20km breiten Streifen entlang der Südküste.
Soil water potential is crucial to plant transpiration and thus to carbon cycling and biosphere–atmosphere interactions, yet it is difficult to measure in the field. Volumetric and gravimetric water contents are easy and cheap to measure in the field, but can be a poor proxy of plant-available water. Soil water content can be transformed to water potential using soil moisture retention curves. We provide empirically derived soil moisture retention curves for seven soil types in the Kruger National Park, South Africa. Site-specific curves produced excellent estimates of soil water potential from soil water content values. Curves from soils derived from the same geological substrate were similar, potentially allowing for the use of one curve for basalt soils and another for granite soils. It is anticipated that this dataset will help hydrologists and ecophysiologists understand water dynamics, carbon cycling and biosphere–atmosphere interactions under current and changing climatic conditions in the region.
Global-scale assessments of freshwater fluxes and storages by hydrological models under historic climate conditions are subject to a variety of uncertainties. Using the global hydrological model WaterGAP 2.2, we investigated the sensitivity of simulated freshwater fluxes and water storage variations to five major sources of uncertainty: climate forcing, land cover input, model structure, consideration of human water use and calibration (or no calibration). In a modelling experiment, five variants of the standard version of WaterGAP 2.2 were generated that differed from the standard version only regarding the investigated source of uncertainty. Sensitivity was analyzed by comparing water fluxes and water storage variations computed by the variants to those of the standard version, considering both global averages and grid cell values for the time period 1971–2000. The basin-specific calibration approach for WaterGAP, which forces simulated mean annual river discharge to be equal to observed values at 1319 gauging stations (representing 54% of global land area except Antarctica and Greenland), has the highest effect on modelled water fluxes and leads to the best fit of modelled to observed monthly and seasonal river discharge. Alternative state-of-the-art climate forcings rank second regarding the impact on grid cell specific fluxes and water storage variations, and their impact is ubiquitous and stronger than that of alternative land cover inputs. The diverse model refinements during the last decade lead to an improved fit to observed discharge, and affect globally averaged fluxes and storage values (the latter mainly due to modelling of groundwater depletion) but only affect a relatively small number of grid cells. Considering human water use is important for the global water storage trend (in particular in the groundwater compartment) but impacts on water fluxes are rather local and only important where water use is high. The best fit to observed time series of monthly river discharge (Nash–Sutcliffe criterion) or discharge seasonality is obtained with the standard WaterGAP 2.2 model version which is calibrated and driven by a sequence of two time series of daily observation-based climate forcings, WFD/WFDEI. Discharge computed by a calibrated model version using monthly CRU 3.2 and GPCC v6 climate input reduced the fit to observed discharge for most stations. Taking into account the investigated uncertainties of climate and land cover data, we estimate that the global 1971–2000 discharge into oceans and inland sinks is between 40 000 and 42 000 km3 yr−1. The range is mainly due differences in precipitation data that affect discharge in uncalibrated river basins. Actual evapotranspiration, with approximately 70 000 km3 yr−1, is rather unaffected by climate and land cover in global sum but differs spatially. Human water use is calculated to reduce river discharge by approximately 1000 km3 yr−1. Thus, global renewable water resources are estimated to range between 41 000 and 43 000 km3 yr−1. The climate data sets WFD (available until 2001) and WFDEI (starting in 1979) were found to be inconsistent with respect to short wave radiation data, resulting in strongly different potential evapotranspiration. Global assessments of freshwater fluxes and storages would therefore benefit from the development of a global data set of consistent daily climate forcing from 1900 to current.
Background: Dengue fever (DF) is the most rapidly spreading mosquito-borne viral disease in the world. In this decade it has expanded to new countries and from urban to rural areas. Nepal was regarded DF free until 2004. Since then dengue virus (DENV) has rapidly expanded its range even in mountain regions of Nepal, and major outbreaks occurred in 2006 and 2010. However, no data on the local knowledge, attitude and practice (KAP) of DF in Nepal exist although such information is required for prevention and control measures.
Methods: We conducted a community based cross-sectional survey in five districts of central Nepal between September 2011 and February 2012. We collected information on the socio-demographic characteristics of the participants and their knowledge, attitude and practice regarding DF using a structured questionnaire. We then statistically compared highland and lowland communities to identify possible causes of observed differences.
Principal findings: Out of 589 individuals interviewed, 77% had heard of DF. Only 12% of the sample had good knowledge of DF. Those living in the lowlands were five times more likely to possess good knowledge than highlanders (P<0.001). Despite low knowledge levels, 83% of the people had good attitude and 37% reported good practice. We found a significantly positive correlation among knowledge, attitude and practice (P<0.001). Among the socio-demographic variables, the education level of the participants was an independent predictor of practice level (P<0.05), and education level and interaction between the sex and age group of the participants were independent predictors of attitude level (P<0.05).
Conclusion: Despite the rapid expansion of DENV in Nepal, the knowledge of people about DF was very low. Therefore, massive awareness programmes are urgently required to protect the health of people from DF and to limit its further spread in this country.
So-called medicanes (Mediterranean hurricanes) are meso-scale, marine, and warm-core Mediterranean cyclones that exhibit some similarities to tropical cyclones. The strong cyclonic winds associated with medicanes threaten the highly populated coastal areas around the Mediterranean basin. To reduce the risk of casualties and overall negative impacts, it is important to improve the understanding of medicanes with the use of numerical models. In this study, we employ an atmospheric limited-area model (COSMO-CLM) coupled with a one-dimensional ocean model (1-D NEMO-MED12) to simulate medicanes. The aim of this study is to assess the robustness of the coupled model in simulating these extreme events. For this purpose, 11 historical medicane events are simulated using the atmosphere-only model, COSMO-CLM, and coupled model, with different setups (horizontal atmospheric grid-spacings of 0.44°, 0.22°, and 0.08°; with/without spectral nudging, and an ocean grid-spacing of 1/12°). The results show that at high-resolution, the coupled model is able to not only simulate most of medicane events but also improve the track length, core temperature, and wind speed of simulated medicanes compared to the atmosphere-only simulations. The results suggest that the coupled model is more proficient for systemic and detailed studies of historical medicane events, and that this model can be an effective tool for future projections.
During the SHIVA (Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere) project an extensive dataset of all halogen species relevant for the atmospheric budget of total organic bromine has been collected in the West Pacific region using the FALCON aircraft operated by the German Aerospace agency DLR (Deutsches Zentrum für Luft- und Raumfahrt) covering a vertical range from the planetary boundary layer up to the ceiling altitude of the aircraft of 13 km. In total, more than 700 measurements were performed with the newly developed fully-automated in-situ instrument GHOST-MS (Gas cHromatograph for the Observation of Tracers – coupled with a Mass Spectrometer) by the Goethe University of Frankfurt (GUF) and with the onboard whole-air sampler WASP with subsequent ground based state-of-the-art GC/MS analysis by the University of East Anglia (UEA). Both instruments yield good agreement for all major (CHBr3 and CH2Br2) and minor (CHBrCl, CHBrCl2 and CHBr2Cl) VSLS (very short-lived substances), at least at the level of their 2 σ measurement uncertainties. In contrast to the suggestion that the Western Pacific could be a major source region for VSLS (Pyle et al., 2011), we found only slightly enhanced mixing ratios of brominated halogen source gases relative to the levels reported in Montzka et al. (2011) for other tropical regions. A budget for total organic bromine, including all four halons,CH3Br and the VSLS, is derived for the upper troposphere, the input region for the TTL and thus also for the stratosphere, compiled from the SHIVA dataset. With exception of the two minor VSLS CHBrCl2 and CHBr2Cl, excellent agreement with the values reported in Montzka et al. (2011) is found, while being slightly higher than previous studies from our group based on balloon-borne measurements.
Gridded maps of meteorological variables are needed for the evaluation of weather and climate models and for climate change monitoring. In order to produce them, values at locations where no observing stations are available need to be estimated from point-wise observations. For the interpolation of meteorological observations deterministic and stochastic methods are often combined. Deterministic methods can account for ancillary information such as elevation, continentality or satellite observations. Stochastic methods such as kriging reproduce observed values at the station locations and also account for spatial variability. In the first two studies of this thesis, a flexible interpolation method for the gridding of locally observed daily extreme temperatures is developed that also provides an optimal estimate of the interpolation ncertainty. In the third study, an observational dataset is created using this interpolation method and then applied to evaluate a climate simulation for Africa.
In the first study, the Regression-Kriging-Kriging (RKK) method is tested for the interpolation of daily minimum and maximum temperatures (Tmin and Tmax) in different regions in Europe. RKK accounts for elevation, continentality index and zonal mean temperature and is applicable in regions of differing station density and climate. The accuracy of RKK is compared to Inverse Distance Weighting, a common deterministic interpolation method, and to Ordinary Kriging, a common stochastic interpolation method. The first step in RKK is to use regression kriging, in which multiple linear regression accounts for topographical effects on the temperature field and kriging minimizes the regression error, to interpolate climatological means. In the second step daily deviations from the monthly climatology are interpolated using simple kriging. Owing to the large climatological differences across the investigation area the interpolation is performed in homogeneous subregions defined according to the Köppen-Geiger climate classification. Cross validation demonstrates the superiority of RKK over the simpler algorithms in terms of accuracy and preservation of spatial variability. The interpolation performance however strongly varies across Europe, being considerably higher over Central Europe (highest station density) than over Greenland (few stations along the coast line). This illustrates the strong impact of the station density on the accuracy of the interpolation result. Satellites provide comprehensive observations of climate variables such as land surface temperature (LST) and cloud cover (CC). However, LST is associated with high uncertainty (standard error ~ 1-2°C), preventing its direct application in meteorology and climatology. The second study investigates the usefulness of LST and CC as predictors for the gridding of daily Tmin and Tmax. The RKK algorithm is compared with similar interpolation methods that apply LST and CC in addition to the predictors used with the RKK algorithm. The investigation is conducted in two regions, Central Europe and the Iberian Peninsula, which differ strongly in average cloud cover (Central Europe is approximately 30% cloud free and the Iberian Peninsula approximately 60 % cloud free). RKKLST (in which monthly mean LST is used as an additional predictor) yields for Central Europe no clear improvement over RKK, yet it reduces the interpolation error over the Iberian Peninsula. This finding can be explained by the higher percentage of cloud free pixels over that region in summer which enables a more robust determination of monthly mean LST. Adding a regression step for daily anomalies (using the predictor CC) yields the RKRK method and improves the preservation of spatial variability over the Iberian Peninsula. Moreover, a successive reduction of the station number (from 140 to 10 stations) reveals an increasing superiority of RKKLST and RKRK over RKK in both regions.
The application of a gridded observational dataset for climate monitoring or climate model validation requires knowledge of the uncertainties associated with the dataset. The estimation of the interpolation uncertainty, here the inter quartile range is the used uncertainty measure, is therefore an important issue within the frame of this thesis. By means of cross validation it is shown that the largest uncertainties occur in regions of low station density (e.g. Greenland), in mountainous regions and along coastlines (in these regions model evaluation results should be interpreted carefully). The magnitude of the interpolation error mainly depends on the station density, while the complexity of terrain has substantially less influence. On average over all regions and investigation days the target precision of the uncertainty estimate is reached. However, on local scales and for single days it can be clearly over- or underestimated. The application of satellite-derived predictors (LST and CC) yields no noteworthy improvement of the uncertainty estimate.
In the last study two regional climate simulations for Africa using the ERA-Interim driven COSMO-CLM (CCLM) model at two different horizontal resolutions (0.22° and 0.44°) are validated. It is assessed whether observed patterns and statistical properties of daily Tmin and Tmax are correctly represented in the model. The ERA-Interim reanalysis and a specially created observational dataset are used as reference. The observational dataset is generated by applying the RKRK algorithm (developed within the second study). The investigations show an occasionally large bias in Tmin and Tmax. The hemispheric summers are generally too warm and the temporal variability in temperature is too high, particularly over extra tropical Africa. The diurnal temperature range is overestimated by about 2°C in the northern subtropics but underestimated by about 2°C over large parts of the African tropics. CCLM reproduces the observed frequency distribution of daily Tmin and Tmax in all African climate regions, and the extreme values in the lower percentiles (5, 10, 20%) for Tmin are well simulated. The higher percentiles (80, 90, 95%) for Tmax are however overestimated by 2-5°C. For both Tmin and Tmax the 0.22° simulation is on average 0.5°C warmer than the 0.44° simulation. Additionally, the higher percentiles are about 1°C warmer for both Tmin and Tmax in the higher resolution run, while the lower percentiles in both runs match very well. Although the temperature pattern is represented in more detail along the coastlines and in topographically complex regions, the higher resolution simulation yields no qualitative improvement.
To summarize, the choice of the appropriate algorithm mainly depends on the interpolation conditions. In cases where the station density is high across the target region and the predictor space is adequately covered by observing stations, the computationally less demanding RK algorithm should be preferred. In regions where the station density is low the more robust RKRK algorithm should be the first choice. Due to the strong physical relation of both CC and LST to Tmin and Tmax the missing information is at least partially compensated for. The estimation of the interpolation uncertainty could be improved by applying a normal score transformation to the data prior to a kriging step. This is because the kriging assumption that the increments of the variable of interest are second order stationary can be approximately met by a normal score transformation.
This study presents a method for adjusting long-term climate data records (CDRs) for the integrated use with near-real-time data using the example of surface incoming solar irradiance (SIS). Recently, a 23-year long (1983–2005) continuous SIS CDR has been generated based on the visible channel (0.45–1 μm) of the MVIRI radiometers onboard the geostationary Meteosat First Generation Platform. The CDR is available from the EUMETSAT Satellite Application Facility on Climate Monitoring (CM SAF). Here, it is assessed whether a homogeneous extension of the SIS CDR to the present is possible with operationally generated surface radiation data provided by CM SAF using the SEVIRI and GERB instruments onboard the Meteosat Second Generation satellites. Three extended CM SAF SIS CDR versions consisting of MVIRI-derived SIS (1983–2005) and three different SIS products derived from the SEVIRI and GERB instruments onboard the MSG satellites (2006 onwards) were tested. A procedure to detect shift inhomogeneities in the extended data record (1983–present) was applied that combines the Standard Normal Homogeneity Test (SNHT) and a penalized maximal T-test with visual inspection. Shift detection was done by comparing the SIS time series with the ground stations mean, in accordance with statistical significance. Several stations of the Baseline Surface Radiation Network (BSRN) and about 50 stations of the Global Energy Balance Archive (GEBA) over Europe were used as the ground-based reference. The analysis indicates several breaks in the data record between 1987 and 1994 probably due to artefacts in the raw data and instrument failures. After 2005 the MVIRI radiometer was replaced by the narrow-band SEVIRI and the broadband GERB radiometers and a new retrieval algorithm was applied. This induces significant challenges for the homogenisation across the satellite generations. Homogenisation is performed by applying a mean-shift correction depending on the shift size of any segment between two break points to the last segment (2006–present). Corrections are applied to the most significant breaks that can be related to satellite changes. This study focuses on the European region, but the methods can be generalized to other regions. To account for seasonal dependence of the mean-shifts the correction was performed independently for each calendar month. In comparison to the ground-based reference the homogenised data record shows an improvement over the original data record in terms of anomaly correlation and bias. In general the method can also be applied for the adjustment of satellite datasets addressing other variables to bridge the gap between CDRs and near-real-time data.
The objective of the present doctoral thesis was to investigate the occurrence, distribution, and behaviour of six hydrophilic ethers: ethyl tert-butyl ether (ETBE), 1,4-dioxane, ethylene glycol dimethyl ether (monoglyme), diethylene glycol dimethyl ether (diglyme), triethylene glycol dimethyl ether (triglyme), and tetraethylene glycol dimethyl ether (tetraglyme) in surface-, waste-, ground- and drinking water samples. Solid phase extraction and gas chromatography/mass spectrometry were used to analyze the six hydrophilic ethers. Altogether more than 150 surface water samples, almost 100 of each groundwater and wastewater samples, and 10 raw and drinking water samples were analyzed during the research project.
Initially, the method was validated in order to simultaneously determine the analytes of interest in various aquatic environments. A solid phase extraction method that uses coconut charcoal (Resprep® activated coconut charcoal, Restek) or carbon molecular sieve material (SupelcleanTM Envi-CarbTM Plus, Supelco) for analyte absorption were found suitable for determination of ETBE, 1,4-dioxane, and glymes in surface-, drinking-, ground- and wastewater samples. Precision and accuracy of both methods was demonstrated for all analytes of interest. The recovery of target compounds from the ultrapure water spiked at 1.0 µg L−1 was between 86.8 % and 98.2 %, with relative standard deviation below 6 %. The samples spiked at 10.0 µg L−1 gave slightly higher recovery of 90.6 % to 112.2 % with a relative standard deviation below 3.4 % for each analyte. Detection and quantification limits in ultrapure water and surface waters were furthermore established. The limit of quantitation (LOQ) in ultrapure water ranged between 0.024 µg L−1 to 0.057 µg L−1 using Restek cartridges, and 0.030 µg L−1 to 0.069 µg L−1 using Supelco cartridges. In the surface water samples the calculated LOQ was 0.032 µg L−1 to 0.067µg L−1 using coconut charcoal material and 0.032 µg L−1 to 0.052 µg L−1 using the carbon molecular sieve material. Moreover, stability of the unpreserved and preserved water samples as well as the extracts was determined. Preservation of samples with sodium bisulfate (at 1 gram per Liter) resulted in much better stability of the ethers in water samples. Subsequently, 27 samples obtained from seven surface water bodies in Germany (Rivers Rhine, Lippe, Main, Oder, Rur, Schwarzbach and Wesel-Datteln Canal) were analyzed for the six hydrophilic ethers. ETBE was present in only two surface waters (Rhine River and Wesel-Datteln Canal) with concentrations close to the LOQ (up to 0.065 µg L−1). 1,4-Dioxane was detected in all of the water samples at concentrations reaching 1.93 µg L–1. Monoglyme was identified only in the Main and Rhine Rivers at the maximum concentration of 0.114 µg L–1 and 0.427 µg L–1, respectively. Very high concentrations (up to 1.73 µg L−1) of diglyme, triglyme, and tetraglyme were detected in the samples from the Oder River. These glymes were also detected in the Rhine River; however the concentrations did not exceed 0.200 µg L–1. Furthermore, tetraglyme was detected in the Main River at an average concentration of 0.409 µg L–1 (n = 6) and in one sample from the Rur River at 0.192 µg L–1.
Four sampling campaigns were conducted at the Oderbruch polder between October 2009 and May 2012, in order to study the behavior of the hydrophilic ethers and organophosphates during riverbank filtration and in the anoxic aquifer. Moreover the suitability of these target compounds was assessed for their use as groundwater organic tracers. At the time of each sampling campaign, concentrations of triglyme and tetraglyme in the Oder River were between 20–185 ng L–1 (n = 4) and 273¬–1576 ng L–1 (n = 4). Monoglyme, diglyme, and 1,4-dioxane were analyzed only during the two last sampling campaigns. At that time, the concentration of diglyme in Oder River was 65¬–94 ng L-1 (n = 2) and 1,4-dioxane 1610¬–3290 ng L–1 (n = 2). In the drainage ditch, following bank filtration, concentrations of ethers ranged between 1090 ng L–1 and 1467 ng L–1 for 1,4-dioxane, 23¬ng L–1 and 41 ng L–1 for diglyme, 37 ng L–1 and 149 ng L–1 for triglyme, and 496 ng L–1 and 1403 ng L–1 for tetraglyme. In the anoxic aquifer, 1,4-dioxane showed the greatest persistence during the groundwater passage. At the distance of 1150 m from the river and an estimated groundwater age of 41.9 years, a concentration above 200 ng L−1 was detected. A positive correlation was found for the inorganic tracer chloride (Cl−) with 1,4-dioxane and tetraglyme. Similarities in the behavior of Cl− and the organic compound suggested that 1,4-dioxane and tetraglyme are controlled by the same hydraulic process and therefore can be used as additional tracers to study the dynamics of the groundwater system. These results show that high concentrations of ethers are present in the surface water and are not removed during bank filtration processes. Moreover, the hydrophilic ethers persist in the anoxic aquifer and little or no degradation is expected, supporting, their possible application as organic tracers.
A separate sampling project was conducted for 1,4-dioxane that focused primarily on its fate in the aquatic environment. This study provided missing information on the extent of water pollution with 1,4-dioxane is Germany. Numerous waste-, surface-, ground- and drinking water samples were collected in order to determine the persistence of 1,4-dioxane in the aquatic environment. The occurrence of 1,4-dioxane was determined in wastewater samples from four municipal sewage treatment plants (STP). The influent and effluent samples were collected during weekly campaigns. The average influent concentrations in all four plants ranged from 262 ± 32 ng L−1 to 834 ± 480 ng L−1, whereas the average effluents concentrations were between 267 ± 35 ng L−1 and 62,260 ± 36,000 ng L−1. The source of increased 1,4-dioxane concentrations in one of the effluents was identified to originate from impurities in the methanol used in the postanoxic denitrification process. Spatial and temporal distribution of 1,4-dioxane in the river Main, Rhine, and Oder was also examined. Concentrations reaching 2,200 ng L−1 in the Oder River, and 860 ng L−1 in both Main and Rhine River were detected. The average load during the sampling was estimated to be 6.5 kg d−1 in the Main, 34.1 kg d−1 in the Oder, and 134.5 kg d−1 in the Rhine River. In all of the sampled rivers, concentrations of 1,4-dioxane increased with distance from the mouth of the river and were found to negatively correlate with the discharge of the river. In order to determine if 1,4-dioxane can reach drinking water supplies, samples from a Rhine River bank filtration site and potable water from two drinking water production facilities were analyzed for the presence of 1,4-dioxane in the raw water and finished potable water. The raw water (following bank filtration) contained 650 ng L−1 to 670 ng L−1 of 1,4-dioxane, whereas the concentration in the finished drinking water fell only to 600 ng L−1 and 490 ng L−1, respectively.
During the final project, investigations of the source identification of high glyme concentrations in the Oder River were carried out. During four sampling campaigns between January, 2012 and April, 2013, 50 samples from the Oder River in the Oderbruch region and Poland were collected. During the first two samplings in the Oderbruch polder, glymes were detected at concentration reaching 0.07 µg L-1 (diglyme), 0.54 µg L−1 (triglyme) and 1.73 µg L−1 (tetraglyme) in the Oder River. The extensive sampling campaign of the Oder River (about 500 km) in Poland helped to identify the area of possible glyme entry into the river. During that sampling the maximum concentrations of triglyme and tetraglyme were 0.46 µg L−1 and 2.21 µg L−1, respectively. A closer investigation of the identified area of pollution, helped to determine the possible sources of glymes in the Oder River. Hence, the final sampling focused on the Kaczawa River, a left tributary of the Oder River and Czarna Woda, a left tributary of Kaczawa River. Moreover, samples from an industrial wastewater treatment plant were collected. Samples from Czarna Woda stream and Kaczawa River contained even higher concentrations of diglyme, triglyme, and tetraglyme, reaching 5.18 µg L−1, 12.87 µg L−1 and 80.81 µg L−1, respectively. Finally, three water samples from a wastewater treatment plant receiving influents from a copper smelter were analyzed. Diglyme, triglyme, and tetraglyme were present at an average concentration of 569 µg L−1, 4300 µg L−1, and 65900 µg L−1, respectively in the wastewater. Further research helped to identify the source of the glymes in the wastewater. The gas desulfurization process – Solinox implemented in the nearby copper smelter uses glymes as physical absorption medium for sulfur dioxide.
Results of this doctoral research provide important information about the occurrence, distribution, and behavior of hydrophilic ethers: 1,4-dioxane, monoglyme, diglyme, triglyme, and tetraglyme in the aquatic environment. A method capable of analyzing a wide range of ether compounds: from a volatile ETBE to a high molecular weight tetraglyme was validated. 1,4-Dioxane and tetraglyme were found to be applicable as organic tracers, since they are not easily attenuated during bank filtration and the anoxic groundwater passage. The extent of water pollution with 1,4-dioxane was shown in waste-, surface-, ground-, and drinking waters. One source of extremely high concentrations of 1,4-dioxane in a municipal sewage treatment plant applying postanoxic denitrification was identified, however more information is needed on the entry of 1,4-dioxane into surface waters. Moreover, 1,4-dioxane was present in drinking water samples from river bank filtration, which demonstrates its persistence in the aquatic environment and its low degradation potential during bank filtration and subsequent water treatment. Furthermore, this was the first study that focused primarily on identifying sources of glymes in surface waters. Glymes find a widespread use in industrial sectors, hence establishing their origin in the surface water is difficult (as with 1,4-dioxane). In this work, a gas desulphurization process was identified to be a dominating source of glyme pollution in the Oder River.
When studying new particle formation, the uncertainty in determining the "true" nucleation rate is considerably reduced when using condensation particle counters (CPCs) capable of measuring concentrations of aerosol particles at sizes close to or even at the critical cluster size (1–2 nm). Recently, CPCs able to reliably detect particles below 2 nm in size and even close to 1 nm became available. Using these instruments, the corrections needed for calculating nucleation rates are substantially reduced compared to scaling the observed formation rate to the nucleation rate at the critical cluster size. However, this improved instrumentation requires a careful characterization of their cut-off size and the shape of the detection efficiency curve because relatively small shifts in the cut-off size can translate into larger relative errors when measuring particles close to the cut-off size.
Here we describe the development of two continuous-flow CPCs using diethylene glycol (DEG) as the working fluid. The design is based on two TSI 3776 counters. Several sets of measurements to characterize their performance at different temperature settings were carried out. Furthermore, two mixing-type particle size magnifiers (PSM) A09 from Airmodus were characterized in parallel. One PSM was operated at the highest mixing ratio (1 L min−1 saturator flow), and the other was operated in a scanning mode, where the mixing ratios are changed periodically, resulting in a range of cut-off sizes. The mixing ratios are determined by varying the saturator flow, where the aerosol flow stays constant at 2.5 L min−1. Different test aerosols were generated using a nano-differential mobility analyser (nano-DMA) or a high-resolution DMA, to obtain detection efficiency curves for all four CPCs. One calibration setup included a high-resolution mass spectrometer (APi-TOF) for the determination of the chemical composition of the generated clusters. The lowest cut-off sizes were achieved with negatively charged ammonium sulfate clusters, resulting in cut-offs of 1.4 nm for the laminar flow CPCs and 1.2 and 1.1 nm for the PSMs. A comparison of one of the laminar-flow CPCs and one of the PSMs measuring ambient and laboratory air showed good agreement between the instruments.
In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes, such as particle formation online, and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically, with a residence time xT (COMPASS1) = 26.5 ± 0.3 min and xT (COMPASS2) = 26.6 ± 0.4 min, at a typical flow rate of 15 L min−1 and a gas leak rate of (1.6 ± 0.8) × 10−5 s−1. Particle loss rates were found to be larger (due to the particles' stickiness to the chamber walls), with an extrapolated maximum of 1.8 × 10−3 s−1 at 1 nm, i.e. a hundredfold of the gas leak rate. This latter value is associated with sticky non-volatile gaseous compounds, too. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system, a set of experiments was conducted under different conditions, i.e. urban and remote, enhanced ozone and terpenes as well as reduced sunlight. In order to do so, an ozone lamp was applied to enhance ozone in one of two chambers; the measurement chamber was protected from radiation by a first-aid cover and volatile organic compounds (VOCs) were added using a small additional flow and a temperature-controlled oven. During the elevated ozone period, ambient particle number and volume increased substantially at urban and remote conditions, but by a different intensity. Protection of solar radiation displayed a clear negative effect on particle number, while terpene addition did cause a distinct daily pattern. E.g. adding β pinene particle number concentration rose by 13% maximum at noontime, while no significant effect was observable during darkness. Therefore, the system is a useful tool for investigating local precursors and the details of ambient particle formation at surface locations as well as potential future feedback processes.
The anthropogenic influence on climate and environment has increased strongly since industrialization about 150 yr ago. The consequences for the atmosphere became more and more apparent and nowadays affect our life quality on Earth progressively. Because of that it is very important to understand the atmospheric processes, on which these effects are based on, in detail. In this study we report the set-up of a novel twin chamber technique that uses the comparative method and establishes an appropriate connection of atmospheric and laboratory methods to broaden the tools for investigations. It is designed to study the impact of certain parameters and gases on ambient processes such as particle formation online and can be applied in a large variety of conditions. The characterisation of both chambers proved that both chambers operate identically with a residence time (xT (COMPASS 1) = 26.5 ± 0.3 min and xT (COMPASS 2) = 26.6 ± 0.4 min) at a typical flow rate of 15 L min−1 and a deposition rate (1.6 ± 0.8) × 10−5 s−1. Comparison measurement showed no significant differences. Therefore operation under atmospheric conditions is trustworthy. To indicate the applicability and the benefit of the system a set of experiments was conducted at different conditions, i.e. urban and remote, enhancing ozone and terpenes as well as reducing sunlight. In the ozone enhanced ambient particle number and volume increased substantially at urban and remote conditions in a different strength. Solar radiation displayed a clear positive effect on particle number as well as terpene addition did at remote conditions. Therefore the system is a useful tool to investigate local precursors, the details of ambient particle formation at surface locations as well as future feedback processes.
A new version of a digital global map of irrigation areas was developed by combining irrigation statistics for 10825 sub-national statistical units and geo-spatial information on the location and extent of irrigation schemes. The map shows the percentage of each 5 arc minute by 5 arc minute cell that was equipped for irrigation around the year 2000. It is thus an important data set for global studies related to water and land use. This paper describes the data set and the mapping methodology and gives, for the first time, an estimate of the map quality at the scale of countries, world regions and the globe. Two indicators of map quality were developed for this purpose, and the map was compared to irrigated areas as derived from two remote sensing based global land cover inventories. We plan to further improve that data set; therefore comments, information and data that might contribute to that effort are highly welcome.
Water footprints have been proposed as sustainability indicators, relating the consumption of goods like food to the amount of water necessary for their production and the impacts of that water use in the source regions. We further developed the existing water footprint methodology, by globally resolving virtual water flows from production to consumption regions for major food crops at 5 arcmin spatial resolution. We distinguished domestic and international flows, and assessed local impacts of export production. Applying this method to three exemplary cities, Berlin, Delhi and Lagos, we find major differences in amounts, composition, and origin of green and blue virtual water imports, due to differences in diets, trade integration and crop water productivities in the source regions. While almost all of Delhi's and Lagos' virtual water imports are of domestic origin, Berlin on average imports from more than 4000 km distance, in particular soy (livestock feed), coffee and cocoa. While 42% of Delhi's virtual water imports are blue water based, the fractions for Berlin and Lagos are 2 and 0.5%, respectively, roughly equal to the water volumes abstracted in these two cities for domestic water use. Some of the external source regions of Berlin's virtual water imports appear to be critically water scarce and/or food insecure. However, for deriving recommendations on sustainable consumption and trade, further analysis of context-specific costs and benefits associated with export production will be required.
Reconstructing the early Paleogene climate dynamics of terrestrial settings in the high southern latitudes is important to assess the role of high-latitude physical and biogeochemical processes in the global climate system. However, whereas a number of high-quality Paleogene climate records has become available for the marine realm of the high southern latitudes over the recent past, the long-term evolution of coeval terrestrial climates and ecosystems is yet poorly known. We here explore the climate and vegetation dynamics on Tasmania from the middle Paleocene to the early Eocene (60.7–54.2 Ma) based on a sporomorph record from Ocean Drilling Program (ODP) Site 1172 on the East Tasman Plateau. Our results show that three distinctly different vegetation types thrived on Tasmania under a high-precipitation regime during the middle Paleocene to early Eocene, with each type representing different temperature conditions: (i) warm-temperate forests dominated by gymnosperms that were dominant during the middle and late Paleocene; (ii) cool-temperate forests dominated by southern beech (Nothofagus) and araucarians across the middle/late Paleocene transition interval (~59.5 to ~59.0 Ma); and (iii) paratropical forests rich in ferns that were established during and in the wake of the Paleocene–Eocene Thermal Maximum (PETM). The transient establishment of cool-temperate forests lacking any frost-sensitive elements (i.e., palms and cycads) across the middle/late Paleocene transition interval indicates markedly cooler conditions, with the occurrence of frosts in winter, on Tasmania during that time. The integration of our sporomorph data with previously published TEX86-based sea-surface temperatures from ODP Site 1172 documents that the vegetation dynamics on Tasmania were closely linked with the temperature evolution in the Tasman sector of the Southwest Pacific region. Moreover, the comparison of our season-specific climate estimates for the sporomorph assemblages from ODP Site 1172 with the TEX86L- and TEX86H-based temperature data suggests a warm-season bias of both calibrations for the early Paleogene of the high southern latitudes.
Planktonic Foraminifera are important marine calcifiers, and the ongoing change in the oceanic carbon system makes it essential to understand the influence of environmental factors on the biomineralisation of their shells. The amount of calcite deposited by planktonic Foraminifera during calcification has been hypothesized to reflect a range of environmental factors. However, it has never been assessed whether their calcification only passively responds to the conditions of the ambient seawater or whether it reflects changes in resource allocation due to physiological stress. To disentangle these two end-member scenarios, an experiment is required where the two processes are separated. A natural analogue to such an experiment occurred during the deposition of the Mediterranean sapropels, where large changes in surface water composition and stratification at the onset of the sapropel deposition were decoupled from local extinctions of planktonic Foraminifera species. We take advantage of this natural experiment and investigate the reaction of calcification intensity, expressed as size-normalized weight (SNW), of four species of planktonic Foraminifera to changing conditions during the onset of Sapropel S5 (126–121 ka) in a sediment core from the Levantine Basin. We observe a significant relationship between SNW and surface water properties, as reflected by stable isotopes in the calcite of Foraminifera shells, but we failed to observe any reaction of calcification intensity on ecological stress during times of decreasing abundance culminating in local extinction. The reaction of calcification intensity to surface water perturbation at the onset of the sapropel was observed only in surface dwelling species, but all species calcified more strongly prior to the sapropel deposition and less strongly within the sapropel than at comparable conditions during the present day. These results indicate that the high-salinity environment of the glacial Mediterranean Sea prior to sapropel deposition induced a more intense calcification, whereas the freshwater injection to the surface waters associated with sapropel deposition inhibited calcification. The results are robust to changes in carbonate preservation and collectively imply that changes in normalized shell weight in planktonic Foraminifera should reflect mainly abiotic forcing.
Planktonic Foraminifera are important marine calcifiers, and the ongoing change in the oceanic carbon system makes it essential to understand the influence of environmental factors on the biomineralization of their shells. The amount of calcite deposited by planktonic Foraminifera during calcification has been hypothesized to reflect a range of environmental factors. However, it has never been assessed whether their calcification only passively responds to the conditions of the ambient seawater or whether it reflects changes in resource allocation due to physiological stress. To disentangle these two end-member scenarios, an experiment is required where the two processes are separated. A natural analogue to such an experiment occurred during the deposition of the Mediterranean sapropels, where large changes in surface water composition and stratification at the onset of the sapropel deposition were decoupled from local extinctions of planktonic Foraminifera species. We took advantage of this natural experiment and investigated the reaction of calcification intensity, expressed as mean area density (MAD), of four species of planktonic Foraminifera to changing conditions during the onset of Sapropel S5 (126–121 ka) in a sediment core from the Levantine Basin. We observed a significant relationship between MAD and surface water properties, as reflected by stable isotopes in the calcite of Foraminifera shells, but we failed to observe any reaction of calcification intensity on ecological stress during times of decreasing abundance culminating in local extinction. The reaction of calcification intensity to surface water perturbation at the onset of the sapropel was observed only in surface-dwelling species, but all species calcified more strongly prior to the sapropel deposition and less strongly within the sapropel than at similar conditions during the present-day. These results indicate that the high-salinity environment of the glacial Mediterranean Sea prior to sapropel deposition induced a~more intense calcification, whereas the freshwater injection to the surface waters associated with sapropel deposition inhibited calcification. The results are robust to changes in carbonate preservation and collectively imply that changes in normalized shell weight in planktonic Foraminifera should reflect mainly abiotic forcing.
In old and heavily weathered soils, the availability of P might be so small that the primary production of plants is limited. However, plants have evolved several mechanisms to actively take up P from the soil or mine it to overcome this limitation. These mechanisms involve the active uptake of P mediated by mycorrhiza, biotic de-occlusion through root clusters, and the biotic enhancement of weathering through root exudation. The objective of this paper is to investigate how and where these processes contribute to alleviate P limitation on primary productivity. To do so, we propose a process-based model accounting for the major processes of the carbon, water, and P cycle including chemical weathering at the global scale. We use simulation experiments to assess the relative importance of the different uptake mechanisms to alleviate P limitation on biomass production. Implementing P limitation on biomass synthesis allows the assessment of the efficiencies of biomass production across different ecosystems.
We find that active P-uptake is an essential mechanism for sustaining P availability on long time scales, whereas biotic de-occlusion might serve as a buffer on time scales shorter than 10 000 yr. Although active P uptake is essential for reducing P losses by leaching, humid lowland soils reach P limitation after around 100 000 yr of soil evolution. Given the generalized modeling framework, our model results compare reasonably with observed or independently estimated patterns and ranges of P concentrations in soils and vegetation. Furthermore, our simulations suggest that P limitation might be an important driver of biomass production efficiency (the fraction of the gross primary productivity used for biomass growth), and that vegetation on older soils becomes P-limited leading to a smaller biomass production efficiency.
With this study, we provide a theoretical basis for investigating the responses of terrestrial ecosystems to P availability linking geological and ecological time scales under different environmental settings.
Recently a considerable amount of effort has been put into quantifying how interactions of the carbon and nitrogen cycle affect future terrestrial carbon sinks. Dynamic vegetation models, representing the nitrogen cycle with varying degree of complexity, have shown diverging constraints of nitrogen dynamics on future carbon sequestration. In this study, we use the dynamic vegetation model LPJ-GUESS to evaluate how population dynamics and resource competition between plant functional types, combined with nitrogen dynamics, have influenced the terrestrial carbon storage in the past and to investigate how terrestrial carbon and nitrogen dynamics might change in the future (1850 to 2100; one exemplary "business-as-usual" climate scenario). Single factor model experiments of CO2 fertilisation and climate change show generally similar directions of the responses of C–N interactions, compared to the C-only version of the model, as documented in previous studies. Under a RCP 8.5 scenario, nitrogen limitation suppresses potential CO2 fertilisation, reducing the cumulative net ecosystem carbon uptake between 1850 and 2100 by 61%, and soil warming-induced increase in nitrogen mineralisation reduces terrestrial carbon loss by 31%. When environmental changes are considered conjointly, carbon sequestration is limited by nitrogen dynamics until present. However, during the 21st century nitrogen dynamics induce a net increase in carbon sequestration, resulting in an overall larger carbon uptake of 17% over the full period. This contradicts earlier model results that showed an 8 to 37% decrease in carbon uptake, questioning the often stated assumption that projections of future terrestrial C dynamics from C-only models are too optimistic.
Background, aim, and scope: The chemical substance 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD) is a non-ionic surfactant used as an industrial defoaming agent and in various other applications. Its commercial name is Surynol 104® and the related ethoxylates are also available as Surfynol® 420, 440, 465 and 485 which are characterized by different grades of ethoxylation of TMDD at both hydroxyl functional groups. TMDD and its ethoxylates offer several advantages in waterborne industrial applications in coatings, inks, adhesives as well as in paper industries. TMDD and its ethoxylates can be expected to reach the aquatic environment due its widespread use and its physico-chemical properties. TMDD has previously been detected in several rivers of Germany with concentrations up to 2.5 µg/L. In the United States, TMDD was also detected in drinking water. However, detailed studies about its presence and distribution in the aquatic environment have not been carried out so far. The aim of the present study was the analysis of the spatial and temporal concentration variations of TMDD in the river Rhine at the Rheingütestation Worms (443.3 km). Moreover, the transported load in the Rhine was investigated during two entire days and 7 weeks between November 2007 and January 2008.
Materials and methods: The sampling was carried out at three different sampling points across the river. Sampling point MWL1 is located in the left part of the river, MWL2 in the middle part, and MWL4 in the right part. One more sampling site (MWL3) was run by the monitoring station until the end of 2006, but was put out of service due to financial constrains. The water at the left side of the river Rhine (MWL1) is influenced by sewage from a big chemical plant in Ludwigshafen and by the sewage water from this city. The water at the right side of the river Rhine (MWL4) is largely composed of the water inflow from river Neckar, discharging into Rhine 14.9 km upstream from the sampling point and of communal and industrial wastewater from the city Mannheim. The water from the middle of the river (MWL2) is largely composed of water from the upper Rhine. Water samples were collected in 1-L bottles by an automatic sampler. The water samples were concentrated by use of solid-phase extraction (SPE) using Bond Elut PPL cartridges and quantified by use of gas chromatography-mass spectrometry (GC-MS). The quantification was carried out with the internal standard method. Based on these results, concentration variations were determined for the day profiles and week profiles. The total number of analyzed samples was 219.
Results: The results of this study provide information on the temporal concentration variability of TMDD in river Rhine in a cross section at one particular sampling point (443.3 km). TMDD was detected in all analyzed water samples at high concentrations. The mean concentrations during the 2 days were 314 ng/L in MWL1, 246 ng/L in MWL2, and 286 ng/L in MWL4. The variation of concentrations was low in the day profiles. In the week profiles, a trend of increasing TMDD concentrations was detected particularly in January 2008, when TMDD concentrations reached values up to 1,330 ng/L in MWL1. The mean TMDD concentrations during the week profiles were 540 ng/L in MWL1, 484 ng/L in MWL2, and 576 ng/L in MWL4. The loads of TMDD were also determined and revealed to be comparable in all three sections of the river. The chemical plant located at the left side of the Rhine is not contributing additional TMDD to the river. The load of TMDD has been determined to be 62.8 kg/d on average during the entire period. By extrapolation of data obtained from seven week profiles the annual load was calculated to 23 t/a.
Discussion: The permanent high TMDD concentrations during the investigation period indicate an almost constant discharge of TMDD into the river. This observation argues for effluents of municipal wastewater treatment plants as the most likely source of TMDD in the river. Another possible source might be the degradation of ethoxylates of TMDD (Surfynol® series 400), in the WWTPs under formation of TMDD followed by discharge into the river. TMDD has to be considered as a high-production-volume (HPV) chemical based on the high concentrations found in this study. In the United States, TMDD is already in the list of HPV chemicals from the Environmental Protection Agency (EPA). However, the amount of TMDD production in Europe is unknown so far and also the biodegradation rates of TMDD in WWTPs have not been investigated.
Conclusions: TMDD was found in high concentrations during the entire sampling period in the Rhine river at the three sampling points. During the sampling period, TMDD concentrations remained constant in each part of the river. These results show that TMDD is uniformly distributed in the water collected at three sampling points located across the river. ‘Waves’ of exceptionally high concentrations of TMDD could not be detected during the sampling period. These results indicate that the effluents of WWTPs have to be considered as the most important sources of TMDD in river Rhine.
Recommendations and perspectives: Based also on the occurrence of TMDD in different surface waters of Germany with concentrations up to 2,500 ng/L and its presence in drinking water in the USA, more detailed investigations regarding its sources and distribution in the aquatic environment are required. Moreover, the knowledge with respect to its ecotoxicity and its biodegradation pathway is scarce and has to be gained in more detail. Further research is necessary to investigate the rate of elimination of TMDD in municipal and industrial wastewater treatment plants in order to clarify the degradation rate of TMDD and to determine to which extent effluents of WWTPs contribute to the input of TMDD into surface waters. Supplementary studies are needed to clarify whether the ethoxylates of TMDD (known as Surfynol 400® series) are hydrolyzed in the aquatic environment resulting in formation of TMDD similar to the well known cleavage of nonylphenol ethoxylates into nonylphenols. The stability of TMDD under anaerobic conditions in groundwater is also unknown and should be studied.
A satellite-based climate record of monthly mean surface solar irradiance (SIS) is investigated with regard to possible inhomogeneities in time. The data record is provided by the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) Satellite Application Facility on Climate Monitoring (CM SAF) for the period of 1983 to 2005, covering a disk area between ±70° in latitude and longitude. The Standard Normal Homogeneity Test (SNHT) and two other homogeneity tests are applied with and without the use of reference SIS data (from the Baseline Surface Radiation Network (BSRN) and from the ECMWF (European Centre for Medium-Range Weather Forecasts) ERA -Interim reanalysis. The focus is on the detection of break-like inhomogeneities, which may occur due to satellite or SIS retrieval algorithm changes. In comparison with the few suitable BSRN SIS observation series with limited extension in time (no data before 1992), the CM SAF SIS time series do not show significant inhomogeneities, even though slight discrepancies in the surface measurements appear. The investigation of the full CM SAF SIS domain reveal inhomogeneities related to most of the documented satellite and retrieval changes, but only for relatively small domain fractions (especially in mountainous desert-like areas in Africa). In these regions the retrieval algorithm is not capable of adjusting for the changes of the satellite instruments. For other areas, e.g., Europe, no such breaks in the time series are found. We conclude that the CM SAF SIS data record has to be further assessed and regionally homogenized before climate trend investigations can be conducted.
Emissions of halogenated very short-lived substances (VSLS) are poorly constrained. However, their inclusion in global models is required to simulate a realistic inorganic bromine (Bry) loading in both the troposphere, where bromine chemistry perturbs global oxidizing capacity, and in the stratosphere, where it is a major sink for ozone (O3). We have performed simulations using a 3-D chemical transport model (CTM) including three top-down and a single bottom-up derived emission inventory of the major brominated VSLS bromoform (CHBr3) and dibromomethane (CH2Br2). We perform the first concerted evaluation of these inventories, comparing both the magnitude and spatial distribution of emissions. For a quantitative evaluation of each inventory, model output is compared with independent long-term observations at National Oceanic and Atmospheric Administration (NOAA) ground-based stations and with aircraft observations made during the NSF HIAPER Pole-to-Pole Observations (HIPPO) project. For CHBr3, the mean absolute deviation between model and surface observation ranges from 0.22 (38%) to 0.78 (115%) parts per trillion (ppt) in the tropics, depending on emission inventory. For CH2Br2, the range is 0.17 (24%) to 1.25 (167%) ppt. We also use aircraft observations made during the 2011 "Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere" (SHIVA) campaign, in the tropical West Pacific. Here, the performance of the various inventories also varies significantly, but overall the CTM is able to reproduce observed CHBr3 well in the free troposphere using an inventory based on observed sea-to-air fluxes. Finally, we identify the range of uncertainty associated with these VSLS emission inventories on stratospheric bromine loading due to VSLS (BryVSLS). Our simulations show BryVSLS ranges from ~ 4.0 to 8.0 ppt depending on the inventory. We report an optimised estimate at the lower end of this range (~ 4 ppt) based on combining the CHBr3 and CH2Br2 inventories which give best agreement with the compilation of observations in the tropics.
Emissions of halogenated very short-lived substances (VSLS) are poorly constrained. However, their inclusion in global models is required to simulate a realistic inorganic bromine (Bry) loading in both the troposphere, where bromine chemistry perturbs global oxidising capacity, and in the stratosphere, where it is a major sink for ozone (O3). We have performed simulations using a 3-D chemical transport model (CTM) including three top-down and a single bottom-up derived emission inventory of the major brominated VSLS bromoform (CHBr3) and dibromomethane (CH2Br2). We perform the first concerted evaluation of these inventories, comparing both the magnitude and spatial distribution of emissions. For a quantitative evaluation of each inventory, model output is compared with independent long-term observations at National Oceanic and Atmospheric Administration (NOAA) ground-based stations and with aircraft observations made during the NSF (National Science Foundation) HIAPER Pole-to-Pole Observations (HIPPO) project. For CHBr3, the mean absolute deviation between model and surface observation ranges from 0.22 (38%) to 0.78 (115%) parts per trillion (ppt) in the tropics, depending on emission inventory. For CH2Br2, the range is 0.17 (24%) to 1.25 (167%) ppt. We also use aircraft observations made during the 2011 Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere (SHIVA) campaign, in the tropical western Pacific. Here, the performance of the various inventories also varies significantly, but overall the CTM is able to reproduce observed CHBr3 well in the free troposphere using an inventory based on observed sea-to-air fluxes. Finally, we identify the range of uncertainty associated with these VSLS emission inventories on stratospheric bromine loading due to VSLS (BryVSLS). Our simulations show BryVSLS ranges from ~4.0 to 8.0 ppt depending on the inventory. We report an optimised estimate at the lower end of this range (~4 ppt) based on combining the CHBr3 and CH2Br2 inventories which give best agreement with the compilation of observations in the tropics.
The SAWNUC (Sulphuric Acid Water NUCleation) microphysical aerosol nucleation model is used to study the effect of reactor walls on the interpretation of nucleation experiments with respect to nucleation theory. This work shows that loss processes, such as wall losses, influence the interpretation of nucleation experiments, especially at low growth rates and short lifetimes of freshly nucleated particles. In these cases the power dependency of the formation rates, determined at a certain particle size, with respect to H2SO4 does not correspond to the approximate number of H2SO4 molecules in the critical cluster as expected by the first nucleation theorem. Observed ∂log(J)/∂log([H2SO4]) therefore can vary widely for identical nucleation conditions but different sink terms.
We investigate the contribution of oceanic methyl iodide (CH3I) to the stratospheric iodine budget. Based on CH3I measurements from three tropical ship campaigns and the Lagrangian transport model FLEXPART, we provide a detailed analysis of CH3I transport from the ocean surface to the cold point in the upper tropical tropopause layer (TTL). While average oceanic emissions differ by less than 50% from campaign to campaign, the measurements show much stronger variations within each campaign. A positive correlation between the oceanic CH3I emissions and the efficiency of CH3I troposphere–stratosphere transport has been identified for some cruise sections. The mechanism of strong horizontal surface winds triggering large emissions on the one hand and being associated with tropical convective systems, such as developing typhoons, on the other hand, could explain the identified correlations. As a result of the simultaneous occurrence of large CH3I emissions and strong vertical uplift, localized maximum mixing ratios of 0.6 ppt CH3I at the cold point have been determined for observed peak emissions during the SHIVA (Stratospheric Ozone: Halogen Impacts in a Varying Atmosphere)-Sonne research vessel campaign in the coastal western Pacific. The other two campaigns give considerably smaller maxima of 0.1 ppt CH3I in the open western Pacific and 0.03 ppt in the coastal eastern Atlantic. In order to assess the representativeness of the large local mixing ratios, we use climatological emission scenarios to derive global upper air estimates of CH3I abundances. The model results are compared with available upper air measurements, including data from the recent ATTREX and HIPPO2 aircraft campaigns. In the eastern Pacific region, the location of the available measurement campaigns in the upper TTL, the comparisons give a good agreement, indicating that around 0.01 to 0.02 ppt of CH3I enter the stratosphere. However, other tropical regions that are subject to stronger convective activity show larger CH3I entrainment, e.g., 0.08 ppt in the western Pacific. Overall our model results give a tropical contribution of 0.04 ppt CH3I to the stratospheric iodine budget. The strong variations in the geographical distribution of CH3I entrainment suggest that currently available upper air measurements are not representative of global estimates and further campaigns will be necessary in order to better understand the CH3I contribution to stratospheric iodine.
As part of the CLACE-6 campaign we performed size-resolved CCN measurements for a~supersaturation range of S = 0.079 % to 0.66% at the high-alpine research station Jungfraujoch, Switzerland, in March~2007. The derived effective hygroscopicity parameter κ describing the influence of particle composition on CCN activity was on average 0.23–0.30 for Aitken (50–100 nm) and 0.32–0.43 for accumulation mode particles (100–200 nm). The campaign average value of κ = 0.3 is similar to the average value of κ for other continental locations. When air masses came from southeasterly directions crossing the Po Valley in Italy, particles were much more hygroscopic (κ ≈ 0.42) due to large sulfate mass fractions. The κ values obtained at S = 0.079 % exhibited a good negative correlation with the organic mass fractions derived from PM1 aerosol mass spectrometer (AMS) measurements. Applying a simple mixing rule the organic and inorganic mass fractions observed by the AMS could be used to reproduce the temporal fluctuations of the hygroscopicity of accumulation mode particles quite well.
We show how during a cloud event the aerosol particles were activated as cloud droplets and then removed from the air by precipitation leaving behind only a small amount of accumulation mode particles consisting mainly of weakly CCN-active particles, most likely externally mixed unprocessed soot particles.
During the campaign we had the opportunity to directly compare two DMT CCN counters for a certain time. The total CCN concentration (NCCN,tot) obtained by the two instruments at equal supersaturations agreed well for both possible operating modes: detecting NCCN,tot directly by sampling the polydisperse aerosol with the CCNC, or indirectly by combining size-resolved measurements of the activated fraction with parallel measurements of the particle size distribution (e.g., by SMPS). However, some supersaturation setpoints differed between the two CCNCs by as much as 20% after applying the instrument calibrations, which resulted in differences of the corresponding NCCN,tot of up to 50%. This emphasizes that it is extremely important to carefully calibrate the supersaturation of the instrument, especially at low S.
The link between atmospheric radicals and newly formed particles at a spruce forest site in Germany
(2013)
It has been claimed for more than a century that atmospheric new particle formation is primarily influenced by the presence of sulphuric acid. However, the activation process of sulphuric acid related clusters into detectable particles is still an unresolved topic. In this study we focus on the PARADE campaign measurements conducted during August/September 2011 at Mt. Kleiner Feldberg in central Germany. During this campaign a set of radicals, organic and inorganic compounds and oxidants and aerosol properties were measured or calculated. We compared a range of organic and inorganic nucleation theories, evaluating their ability to simulate measured particle formation rates at 3 nm in diameter (J3) for a variety of different conditions. Nucleation mechanisms involving only sulphuric acid tentatively captured the observed noon-time daily maximum in J3, but displayed an increasing difference to J3 measurements during the rest of the diurnal cycle. Including large organic radicals, i.e. organic peroxy radicals (RO2) deriving from monoterpenes and their oxidation products in the nucleation mechanism improved the correlation between observed and simulated J3. This supports a recently proposed empirical relationship for new particle formation that has been used in global models. However, the best match between theory and measurements for the site of interest was found for an activation process based on large organic peroxy radicals and stabilized Criegee intermediates (sCI). This novel laboratory derived algorithm simulated the daily pattern and intensity of J3 observed in the ambient data. In this algorithm organic derived radicals are involved in activation and growth and link the formation rate of smallest aerosol particles with OH during daytime and NO3 during nighttime. Because of the RO2s lifetime is controlled by HO2 and NO we conclude that peroxy radicals and NO seem to play an important role for ambient radical chemistry not only with respect to oxidation capacity but also for the activation process of new particle formation. This is supposed to have significant impact of atmospheric radical species on aerosol chemistry and should to be taken into account when studying the impact of new particles in climate feedback cycles.
This study presents a comprehensive and critical assessment of the meteorological conditions and atmospheric flow during the Lagrangian-type "Hill Cap Cloud Thuringia 2010" experiment (HCCT-2010). HCCT-2010 was performed in September and October 2010 at Mt. Schmücke in the Thuringian forest, Germany, applying three measurements sites (upwind, in-cloud, downwind) to study physical and chemical aerosol-cloud-interactions. A Lagrangian-type hill cap cloud experiment requires suitable cloud and particularly connected airflow conditions, i.e. representative air masses at the different measurement sites. Therefore, the present study aimed at the identification of time periods during the 6-weeks duration of the campaign, where such conditions were fulfilled and which can be used in further data examinations.
The following topics were studied in detail: (i) the general synoptic weather situations including the mesoscale flow conditions by means of a classification of advected air masses and calculation of non-dimensional flow parameters (e.g. Froude number), (ii) local meteorological conditions, including synoptic front passages, the presence of orographic or frontal cloudiness, cloud base heights and vertical stratification, and (iii) local flow conditions by means of statistical analyses using the quasi-inert trace gas ozone and selected size bins of particle number size distributions as well as SF6 tracer experiments in the campaign area. A comprehensive analyses using statistical measures such as the COD (Coefficient Of Divergence) and cross-correlation have been carried out for the first time in the context of a Lagrangian-type hill cap cloud experiment. Suitable criteria for the aimed statistical analyses were thus developed and applied in the present study to characterise the local flow connectivity in detail.
The comprehensive examination resulted in a total of 14 so-called "Full Cloud Events" (FCE), which are shown to conform to the Lagrange-type experimental philosophy of HCCT-2010. In addition, 15 so-called "Non-Cloud Events" (NCEs) could be established, which can be used as reference cases as they provide similarly suitable flow conditions but no cloud at the summit site. Orographic cloudiness was identified for approx. one third of the FCE periods, while about two thirds were associated to synoptic fronts. The statistical flow analyses indicate the existence of a strong link between the sites during the events, particularly under constant south-westerly flow conditions, high wind speeds and slightly stable stratification. The COD analyses using continuously measured concentrations of ozone and the 49 nm diameter particle bin revealed particularly for COD values below 0.1 very consistent time series, i.e. closely linked air masses between the different sites. The cross-correlation analysis revealed under connected flow conditions typical overflow times of about 15 to 30 min between the two valley sites. Additionally, the performed SF6 tracer experiments during the campaign clearly demonstrate that under appropriate meteorological conditions a Lagrangian-type approach is valid and that the connected flow validation procedure developed in this work is suitable for identifying such conditions. Finally, an overall evaluation of the identified FCEs is presented, which provides the basis for subsequent investigations of the measured chemical and physical data during HCCT-2010.
Die vorliegende Arbeit behandelt das Forschungsthema der Entstehung des flüssigen Eisenkerns im Zentrum unseres Planeten. Dieses bislang wenig verstandene Gebiet ist reich an Fragestellungen, sowohl für Experimentatoren als auch für die Geodynamik. Es gibt sehr viele Arbeiten, die den Bildungsprozess experimentell untersuchen, jedoch wurde in den letzten Jahren die numerische Untersuchung in diesem Gebiet kaum vorangetrieben. Der experimentelle Teil der Arbeit stellt sich hierbei der aktuellen Frage nach der Perkolationsschwelle
1 von Eisenschmelze in der Silikatmatrix der Protoerde, während numerisch die Effekte von Potenzgesetzkriechen, Dissipation und Schmelzsegregation beim Absinken eines Eisendiapirs nach Ausbildung eines ersten flachen Magmaozeans in der Protoerde behandelt werden. Die genauen Fragestellungen könnnen dabei im letzten Abschnitt der Einleitung gefunden werden.
This thesis aims to analyse in a first step the physical and chemical properties of soil profiles along pedomorphological transects in different land used conditions (protected, partly protected as well as cultivated and pastured areas) in North West Benin and in South East Burkina Faso. The information about soils, which are carried out in consideration of the pedogenesis processes like weathering types, saprolitisation, formation of laterite crusts and denudation within the planation surfaces are therefore correlated in a second step with the structure and dynamic of woody plant around individual soil profiles. The relationship soil properties and woody plant is investigated in order to assess the reciprocal influence between the diversity of woody plants and soil characteristics within a small scale study and under different land use conditions.
A common vertical and lateral differentiation of physical and chemical properties regardless of the partly protected, protected and cultivated status of the sites can be noticed. Thus, in the cultivated site of Kikideni and in the partly protected zone of Natiabouani (South East Burkina Faso) sandy loam and sandy clay loam soil surfaces are widespread because of the occurrence of similar erosion processes like sheet wash, rill and gully erosion while in the central part of the Pendjari National Park loamy soil textures are prevailing. In fact, the steepness of the relief and the length of the slopes in the Pendjari Park seem to limit the development of some erosion forms as gully. Furthermore, the classification of soils reflects the variation of pedological processes along the transects and thus the occurrence of different soil types. The status of the sites may play an insignificant role in the differentiation of soil properties within the scale of small pedomorphological transects. A direct comparison of the vegetation type in the land use respectively partly protected and in the total protected sites (National Park of Pendjari) reveals a transition from the shrub savanna to the tree savanna. In conclusion it is important to insist on the fact that the variations of soil parameters within small slopes and the different sites are more conditioned by varying erosion processes and drainage conditions than the status protected or land use sites while the composition and diversity of plants is influenced by the status of the sites, the prevailing management tools, the pedogenetic conditions as well as the presence of wild animals like elephants. The ordination diagram shows that the organic matter is better correlated to the subgroup representing principally the sites of the hunting zone of the Pendjari Park and might be an explaining factor to the distribution of these sample sites groups. CEC ratios in the partly protected site of Natiabouani represent the highest measured in all sites. Nevertheless, statistical analysis of the CCA (canonical correspondence analysis) indicates generally a low correlation. This tendency is consolidated by the Monte Carlo test (p=0.14) which is a good indicator of species and environmental conditions. The detailed analysis of soil properties and the vegetation dynamic as well as their relationship within small pedomorphological transects represent an important pedological and botanical data collection involving different compartments. This thesis contributes to the better understanding of the savanna landscapes of West Africa and may provide essential scientific background for each development project directed towards interdisciplinary and integrative researches.
Nucleation of aerosol particles from trace atmospheric vapours is thought to provide up to half of global cloud condensation nuclei. Aerosols can cause a net cooling of climate by scattering sunlight and by leading to smaller but more numerous cloud droplets, which makes clouds brighter and extends their lifetimes. Atmospheric aerosols derived from human activities are thought to have compensated for a large fraction of the warming caused by greenhouse gases. However, despite its importance for climate, atmospheric nucleation is poorly understood. Recently, it has been shown that sulphuric acid and ammonia cannot explain particle formation rates observed in the lower atmosphere. It is thought that amines may enhance nucleation, but until now there has been no direct evidence for amine ternary nucleation under atmospheric conditions. Here we use the CLOUD (Cosmics Leaving Outdoor Droplets) chamber at CERN and find that dimethylamine above three parts per trillion by volume can enhance particle formation rates more than 1,000-fold compared with ammonia, sufficient to account for the particle formation rates observed in the atmosphere. Molecular analysis of the clusters reveals that the faster nucleation is explained by a base-stabilization mechanism involving acid–amine pairs, which strongly decrease evaporation. The ion-induced contribution is generally small, reflecting the high stability of sulphuric acid–dimethylamine clusters and indicating that galactic cosmic rays exert only a small influence on their formation, except at low overall formation rates. Our experimental measurements are well reproduced by a dynamical model based on quantum chemical calculations of binding energies of molecular clusters, without any fitted parameters. These results show that, in regions of the atmosphere near amine sources, both amines and sulphur dioxide should be considered when assessing the impact of anthropogenic activities on particle formation.
In dieser Arbeit wird die Richtungsabhängigkeit seismischer Geschwindigkeiten im Erdmantel unterhalb Deutschlands und angrenzender Gebiete durch die Analyse der teleseismischen Kernphase SKS auf Doppelbrechung untersucht (Scherwellen-Splitting). Die Anisotropie wird durch die Splittingparameter Φ und δt beschrieben und erlaubt Rückschlüsse auf geodynamische Prozesse.
Untersucht werden Aufzeichnungen des Deutschen Seismologischen Regionalnetzes (GRSN) und assoziierter Stationen aus dem Zeitraum von 1993 bis 2009. Für drei Stationen des Gräfenberg-Arrays (GRF-Array) sind Wellenformen ab 1976 verfügbar, welche damit einen weltweit einmaligen Datensatz liefern.
Auf Grund des stetigen Ausbaus der seismologischen Netze und des langen Beobachtungszeitraumes können über 3.000 Seismogramme ausgewertet werden. Der Hauptteil dieser Arbeit besteht daher in der Entwicklung einer automatischen Methodik zur Analyse von SKS-Splitting: ADORE ("Automatische Bestimmung von DOppelbrechnungsparametern in REgionalseismischen Netzwerken"). Für regionale Netze wie das GRSN gewährleistet ADORE eine objektive Bestimmung der Splittingparameter. Zunächst wird das seismologische Netzwerk als seismisches Array aufgefasst, um durch eine Frequenz-Wellenzahl-Analyse den Einsatz der SKS-Phase ohne manuellen Eingriff zu bestimmen. Die Berechnung der Splittingparameter erfolgt durch eine Inversion nach der Methode der Minimierung des transversalen Energieanteils. Automatisch wird das optimale Fenster um den SKS-Einsatz positioniert, für jede Beben-Stations-Kombination werden dazu 3.600 Einzelinversionen durchgeführt.
Um diese Vielzahl von Auswertungen in akzeptabler Zeit zu berechnen, nutzt ADORE moderne Rechnerarchitekturen aus, verteilt die Berechnungen auf mehrere Computer im lokalen Netzwerk und erzielt damit eine Beschleunigung um einen Faktor 60.
Die Analyse des gesamten Datensatzes ergibt folgende Ergebnisse: An allen analysierten Stationen wurde ein Scherwellen-Splitting festgestellt, der Stationsuntergrund weist somit überall Anisotropie auf. Für 240 Erdbeben können insgesamt 494 Wertepaare mit höchster Qualität bestimmt werden.
Unter der Annahme einer homogenen ungeneigten anisotropen Schicht unterhalb der jeweiligen Station können die Einzelmessungen pro Station gemittelt werden. Damit sind Regionen mit ähnlichen Merkmalen gut zu identifizieren: Im Norden Deutschlands herrschen NW-SO-, in der Mitte W-O-Richtungen und im Süden SW-NO-Richtungen vor.
Die Verzögerungszeiten liegen im Bereich zwischen 1.0 (Station Taunus) und 2.2 Sekunden (Tannenbergsthal, TANN). Auf Grund des hohen Wertes sind die Ursachen für die hier beobachteten Zeiten dem Erdmantel und nicht der Kruste zuzuordnen. Die bevorzugte Ausrichtung von anisotropen Kristallen auf Grund von Fließprozessen von Mantelmaterial ist Quelle der beobachteten Anisotropie. Rezente Fließprozesse von Mantelmaterial sind vor allem an der Unterkante der Lithosphäre wahrscheinlich. Durch Gebirgsbildungsprozesse, vorhandene Gebirgswurzeln oder regionale Veränderungen in der Mächtigkeit der Lithosphäre entstehen Barrieren für viskoses Mantelmaterial.
Als tektonische Ursachen für die hier gemessenen Orientierungen ist im Norden die Tornquist-Teisseyre-Linie (TTZ), in der Mitte die Variszische Gebirgsbildung und im Süden Einflüsse des Alpenbogens anzusehen. Ausnahmen bilden die Stationen Clausthal-Zellerfeld (CLZ), Rügen und Black-Forest-Observatory (BFO). Während bei letzterer ein Einfluss der Spreizungszone des Oberrheingrabens zu vermuten ist, scheint die Intrusion des Brockengranits die Beobachtungen an CLZ zu prägen. Rügen liegt in einer Übergangszone zwischen Sorgenfrei-Tornquist-Zone und TTZ.
Durch die Vielzahl von vorhandenen Einzelmessungen lassen sich an manchen Stationen komplexe Modelle untersuchen. Dazu zählen neben Gradientmodellen auch die geneigte Schicht und Zwei-Schicht-Modelle. Für sechs Stationen kann ein Zwei-Schicht-Modell erstellt werden: BFO, Gräfenberg A1, Fürstenfeldbruck (FUR), Rüdersdorf (RUE), TANN und Unterbreitzbach (UBBA). Die Interpretation der Richtungen von oberer und unterer Schicht gelingt für einen Teil der genannten Stationen: An BFO liegt die Orientierung der unteren Schicht parallel zur Vorzugsrichtung der variszischen Gebirgsbildung, jene der obere Schicht antiparallel zur Spreizungsrichtung des Rheingrabens. Für die Station FUR ist eine Überlagerung mit der Streichrichtung des Alpenmassivs zu beobachten. An GRA1 wird die untere Schicht offenbar durch rezente oder eingefrorene Anisotropie des Böhmischen Massivs bzw. des Eger-Riftsystems beeinflusst. Eine vergleichbare Wirkung ist durch die TTZ an der Station RUE zu erkennen.
ADORE wurde weiterhin auf einen Datensatz des temporären RIFTLINK-Projektes angewandt.
Forty two samples of the Late Eocene Kiliran oil shale, Central Sumatra Basin, Indonesia were collected from a 102 m long drill core. Palynofacies and geochemical analyses have been carried out to reconstruct the paleoenvironmental conditions and paleoecology during deposition of the oil shale. Amorphous organic matter (AOM) is very abundant (>76%). B. braunii palynomorph is present (3-16%) as the only autochtonous structured organic matter and generally more abundant in middle part of the profile. The stable carbon isotopic composition of organic matter (δ13C) varies from -27.0 to -30.5‰ and is generally more depleted in middle part of the profile. The ratio of total organic carbon to sulfur (TOC/S), used as salinity indicator, ranges from 2.5 to 15.8 and shows variations along the profile. Relatively less saline environments are observed in the middle part profile. Fungal remains are generally present only in middle part of the profile with distinct peak of abundances. The presence of fungal remains is regarded as an indication for a relatively warmer climate during deposition of middle part of the profile. The warmer climate is thought to influence the establishment of a thermocline, limiting the supply of recycled nutrients to the epilimnion. Consequently, the primary productivity in the Kiliran lake decreased during deposition of the middle part of the profile as indicated by the relatively depleted δ13C and the blooming of B. braunii. The chemocline was also shoaling during deposition of the middle part of the profile according to the higher abundance of isorenieratene derivatives of green sulfur bacteria origin. The warmer climate affected also to increase of water supply and thus less saline environments.
Tectonic subsidence is also thought to be a significant factor for the development of the Kiliran lake. The Zr/Rb ratio, an indicator for grain size, ranges from 0.4 to 1.3 and generally increases upwards along the profile. Three sudden decreases of the ratio are observed, indicating rapid change to finer grain size. These decreases are interpreted to indicate rapid deepening events of the lake due to mainly periodic subsidence. During deposition of lower part of the profile, the subsidence rates might have been relatively higher than sediment and water supply rates, resulting in a higher autochtonous fraction in the oil shale. During deposition of middle part of the profile, the sediment and water supply rates were relatively higher promoting distinct progradational sedimentation. Subsequently, the lake became more shallow and smaller during deposition of the upper part of the profile, leading to a relatively higher terrigenous input to the oil shale.
Norneohop-13(18)-ene and neohop-13(18)-ene derived from methanotrophic bacteria are the dominant hopanoid hydrocarbons. The sum of their concentrations varies from 40.6 to 360.0 μg/g TOC. The δ13C of these compounds are extremely depleted (-45.2 to -50.2‰). The occurrence of abundant bacteria including methanotrophic bacteria was responsible for the recycling of carbon below the chemocline of the lake. The effect of the recycling of carbon is observed by the presence of a concomitant depletion (about 7-9‰) in 13C of some specific biomarkers derived from organisms dwelling in the whole phototrophic zone.
4-Methylsterane and 4-methyldiasterene homologues occur in the oil shale as the predominant biomarkers. The sum of the concentrations of all homologues are about 40.3-1,009.2 μg/g TOC with generally higher values in uppermost and lower parts of the profile. Ca accounts as the predominant element in the oil shale, ranging from 5.0 to 16.7%. This element shows generally parallel variation with the 4-methylsterane homologues along the profile. This suggests that the 4-methylsteranes were derived from biological sources favoring more alkaline and more trophic environments. On the other hand, these compounds were less abundant in middle part of the profile which is consistent with less alkaline and less trophic environments promoting B. braunii to bloom.
The 4-methylsterane homologues are considered to originate from Dinoflagellates. Alternation between Dinoflagellates and B. braunii in Paleogene lake systems due to water chemistry changes are known from previous studies. Moreover, freshwater Dinoflagellates have been frequently reported to occur in the basin depocenters. In the present case, distinct alternation between B. braunii abundances and concentrations of 4-methylsterane homologues along the studied oil shale profile suggest that the 4-methylsterane homologues were derived from freshwater Dinoflagellates although dinosterane is not present in the sediment extracts. Water alkalinity and trophic level changes were most likely responsible for the alternation of Dinoflagellates and B. braunii blooming.
Sulphuric acid, ammonia, amines, and oxidised organics play a crucial role in nanoparticle formation in the atmosphere. In this study, we investigate the composition of nucleated nanoparticles formed from these compounds in the CLOUD (Cosmics Leaving Outdoor Droplets) chamber experiments at CERN (Centre européen pour la recherche nucléaire). The investigation was carried out via analysis of the particle hygroscopicity, ethanol affinity, oxidation state, and ion composition. Hygroscopicity was studied by a hygroscopic tandem differential mobility analyser and a cloud condensation nuclei counter, ethanol affinity by an organic differential mobility analyser and particle oxidation level by a high-resolution time-of-flight aerosol mass spectrometer. The ion composition was studied by an atmospheric pressure interface time-of-flight mass spectrometer. The volume fraction of the organics in the particles during their growth from sizes of a few nanometers to tens of nanometers was derived from measured hygroscopicity assuming the Zdanovskii–Stokes–Robinson relationship, and compared to values gained from the spectrometers. The ZSR-relationship was also applied to obtain the measured ethanol affinities during the particle growth, which were used to derive the volume fractions of sulphuric acid and the other inorganics (e.g. ammonium salts). In the presence of sulphuric acid and ammonia, particles with a mobility diameter of 150 nm were chemically neutralised to ammonium sulphate. In the presence of oxidation products of pinanediol, the organic volume fraction of freshly nucleated particles increased from 0.4 to ~0.9, with an increase in diameter from 2 to 63 nm. Conversely, the sulphuric acid volume fraction decreased from 0.6 to 0.1 when the particle diameter increased from 2 to 50 nm. The results provide information on the composition of nucleated aerosol particles during their growth in the presence of various combinations of sulphuric acid, ammonia, dimethylamine and organic oxidation products.
The international research project RECONCILE has addressed central questions regarding polar ozone depletion, with the objective to quantify some of the most relevant yet still uncertain physical and chemical processes and thereby improve prognostic modelling capabilities to realistically predict the response of the ozone layer to climate change. This overview paper outlines the scope and the general approach of RECONCILE, and it provides a summary of observations and modelling in 2010 and 2011 that have generated an in many respects unprecedented dataset to study processes in the Arctic winter stratosphere. Principally, it summarises important outcomes of RECONCILE including (i) better constraints and enhanced consistency on the set of parameters governing catalytic ozone destruction cycles, (ii) a better understanding of the role of cold binary aerosols in heterogeneous chlorine activation, (iii) an improved scheme of polar stratospheric cloud (PSC) processes that includes heterogeneous nucleation of nitric acid trihydrate (NAT) and ice on non-volatile background aerosol leading to better model parameterisations with respect to denitrification, and (iv) long transient simulations with a chemistry-climate model (CCM) updated based on the results of RECONCILE that better reproduce past ozone trends in Antarctica and are deemed to produce more reliable predictions of future ozone trends. The process studies and the global simulations conducted in RECONCILE show that in the Arctic, ozone depletion uncertainties in the chemical and microphysical processes are now clearly smaller than the sensitivity to dynamic variability.
The International Halocarbons in Air Comparison Experiment (IHALACE) was conducted to document relationships between calibration scales among various laboratories that measure atmospheric greenhouse and ozone depleting gases. Six stainless steel cylinders containing natural and modified natural air samples were circulated among 19 laboratories. Results from this experiment reveal relatively good agreement among commonly used calibration scales for a number of trace gases present in the unpolluted atmosphere at pmol mol−1 (parts per trillion) levels, such as chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and hydrofluorocarbons (HFCs). Some scale relationships were found to be consistent with those derived from bi-lateral experiments or from analysis of atmospheric data, while others revealed discrepancies. The transfer of calibration scales among laboratories was found to be problematic in many cases, meaning that measurements tied to a common scale may not, in fact, be compatible. These results reveal substantial improvements in calibration over previous comparisons. However there is room for improvement in communication and coordination of calibration activities with respect to the measurement of halogenated and related trace gases.
Numerous reactive volatile organic compounds (VOCs) are emitted into the atmosphere by vegetation. Most biogenic VOCs are highly reactive towards the atmosphere's most important oxidant, the hydroxyl (OH) radical. One way to investigate the chemical interplay between biosphere and atmosphere is through the measurement of total OH reactivity, the total loss rate of OH radicals. This study presents the first determination of total OH reactivity emission rates (measurements via the comparative reactivity method) based on a branch cuvette enclosure system mounted on a Norway spruce (Picea abies) throughout spring, summer and autumn 2011. In parallel VOC emission rates were monitored by a second proton-transfer-reaction mass spectrometer (PTR-MS), and total ozone (O3) loss rates were obtained inside the cuvette. Total OH reactivity emission rates were in general temperature and light dependent, showing strong diel cycles with highest values during daytime. Monoterpene emissions contributed most, accounting for 56–69% of the measured total OH reactivity flux in spring and early summer. However, during late summer and autumn the monoterpene contribution decreased to 11–16%. At this time, a large missing fraction of the total OH reactivity emission rate (70–84%) was found when compared to the VOC budget measured by PTR-MS. Total OH reactivity and missing total OH reactivity emission rates reached maximum values in late summer corresponding to the period of highest temperature. Total O3 loss rates within the closed cuvette showed similar diel profiles and comparable seasonality to the total OH reactivity fluxes.
Total OH reactivity fluxes were also compared to emissions from needle storage pools predicted by a temperature-only-dependent algorithm. Deviations of total OH reactivity fluxes from the temperature-only-dependent emission algorithm were observed for occasions of mechanical and heat stress. While for mechanical stress, induced by strong wind, measured VOCs could explain total OH reactivity emissions, during heat stress they could not. The temperature-driven algorithm matched the diel variation of total OH reactivity emission rates much better in spring than in summer, indicating a different production and emission scheme for summer and early autumn. During these times, unmeasured and possibly unknown primary biogenic emissions contributed significantly to the observed total OH reactivity flux.
has been demonstrated in climate models that both the Indian and East Asian summer monsoons (ISM and EASM) are strengthened by the uplift of the entire Asian orography or Tibetan Plateau (TP) (i.e. bulk mountain uplift). Such an effect is widely perceived as the major mechanism contributing to the evolution of Asian summer monsoons in the Neogene. However, geological evidence suggests more diachronous growth of the Asian orography (i.e. regional mountain uplift) than bulk mountain uplift. This demands a re-evaluation of the relation between mountain uplift and the Asian monsoon in the geological periods. In this study, sensitivity experiments considering the diachronous growth of different parts of the Asian orography are performed using the regional climate model COSMO-CLM to investigate their effects on the Asian summer monsoons. The results show that, different from the bulk mountain uplift, the regional mountain uplift can lead to an asynchronous development of the ISM and EASM. While the ISM is primarily intensified by the thermal insulation (mechanical blocking) effect of the southern TP (Zagros Mountains), the EASM is mainly enhanced by the surface sensible heating of the central, northern and eastern TP. Such elevated surface heating can induce a low-level cyclonic anomaly around the TP that reduces the ISM by suppressing the lower tropospheric monsoon vorticity, but promotes the EASM by strengthening the warm advection from the south of the TP that sustains the monsoon convection. Our findings provide new insights to the evolution of the Asian summer monsoons and their interaction with the tectonic changes in the Neogene.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. This paper investigates the application of statistical distance, like one minus common variance of observation time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of available coarse network observations to sites of a denser network, which is not reporting for the interpolation date, yields more robust interpolation results. The most distinct performance enhancement is in or close to mountainous terrain. Therefore, application of statistical distance in the inverse distance weighting interpolation or in similar methods can parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
Spatial interpolation of rain gauge data is important in forcing of hydrological simulations or evaluation of weather predictions, for example. The spatial density of available data sites is often changing with time. This paper investigates the application of statistical distance, like one minus common variance of time series, between data sites instead of geographical distance in interpolation. Here, as a typical representative of interpolation methods the inverse distance weighting interpolation is applied and the test data is daily precipitation observed in Austria. Choosing statistical distance instead of geographical distance in interpolation of an actually available coarse observation network yields more robust interpolation results at sites of a denser network with actually lacking observations. The performance enhancement is in or close to mountainous terrain. This has the potential to parsimoniously densify the currently available observation network. Additionally, the success further motivates search for conceptual rain-orography interaction models as components of spatial rain interpolation algorithms in mountainous terrain.
In this study, two different methods were applied to derive daily and monthly sunshine duration based on high-resolution satellite products provided by the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) Satellite Application Facility on Climate Monitoring using data from Meteosat Second Generation (MSG) SEVIRI (Spinning Enhanced Visible and Infrared Imager). The satellite products were either hourly cloud type or hourly surface incoming direct radiation. The satellite sunshine duration estimates were not found to be significantly different using the native 15-minute temporal resolution of SEVIRI. The satellite-based sunshine duration products give additional spatial information over the European continent compared with equivalent in situ-based products. An evaluation of the satellite sunshine duration by product intercomparison and against station measurements was carried out to determine their accuracy. The satellite data were found to be within ±1 h/day compared to high-quality Baseline Surface Radiation Network or surface synoptic observations (SYNOP) station measurements. The satellite-based products differ more over the oceans than over land, mainly because of the treatment of fractional clouds in the cloud type-based sunshine duration product. This paper presents the methods used to derive the satellite sunshine duration products and the performance of the different retrievals. The main benefits and disadvantages compared to station-based products are also discussed.
The current study tested the assumption that floristic and functional diversity patterns are negatively related to soil nitrogen content. We analyzed 20 plots with soil N-contents ranging from 0.63% to 1.06% in a deciduous forest near Munich (Germany). To describe species adaptation strategies to different nitrogen availabilities, we used a plant functional type (PFT) approach. Each identified PFT represents one realized adaptation strategy to the current environment. These were correlated, next to plant species richness and evenness, to soil nitrogen contents. We found that N-efficient species were typical for low soil nitrogen contents, while N-requiring species occur at high N-contents. In contrast to our initial hypotheses, floristic and functional diversity measures (number of PFTs) were positively related to nitrogen content in the soil. Every functional group has its own adaptation to the prevailing environmental conditions; in consequence, these functional groups can co-exist but do not out-compete one another. The increased number of functional groups at high N-contents leads to increased species richness. Hence, for explaining diversity patterns we need to consider species groups representing different adaptations to the current environmental conditions. Such co-existing ecological strategies may even overcome the importance of competition in their effect on biodiversity.
This article presents an environmental remote sensing application using a UAV that is specifically aimed at reducing the data gap between field scale and satellite scale in soil erosion monitoring in Morocco. A fixed-wing aircraft type Sirius I (MAVinci, Germany) equipped with a digital system camera (Panasonic) is employed. UAV surveys are conducted over different study sites with varying extents and flying heights in order to provide both very high resolution site-specific data and lower-resolution overviews, thus fully exploiting the large potential of the chosen UAV for multi-scale mapping purposes. Depending on the scale and area coverage, two different approaches for georeferencing are used, based on high-precision GCPs or the UAV’s log file with exterior orientation values respectively. The photogrammetric image processing enables the creation of Digital Terrain Models (DTMs) and ortho-image mosaics with very high resolution on a sub-decimetre level. The created data products were used for quantifying gully and badland erosion in 2D and 3D as well as for the analysis of the surrounding areas and landscape development for larger extents.
Reduction of greenhouse gas (GHG) emissions to minimize climate change requires very significant societal effort. To motivate this effort, it is important to clarify the benefits of avoided emissions. To this end, we analysed the impact of four emissions scenarios on future renewable groundwater resources, which range from 1600 GtCO2 during the 21st century (RCP2.6) to 7300 GtCO2 (RCP8.5). Climate modelling uncertainty was taken into account by applying the bias-corrected output of a small ensemble of five CMIP5 global climate models (GCM) as provided by the ISI-MIP effort to the global hydrological model WaterGAP. Despite significant climate model uncertainty, the benefits of avoided emissions with respect to renewable groundwater resources (i.e. groundwater recharge (GWR)) are obvious. The percentage of projected global population (SSP2 population scenario) suffering from a significant decrease of GWR of more than 10% by the 2080s as compared to 1971–2000 decreases from 38% (GCM range 27–50%) for RCP8.5 to 24% (11–39%) for RCP2.6. The population fraction that is spared from any significant GWR change would increase from 29% to 47% if emissions were restricted to RCP2.6. Increases of GWR are more likely to occur in areas with below average population density, while GWR decreases of more than 30% affect especially (semi)arid regions, across all GCMs. Considering change of renewable groundwater resources as a function of mean global temperature (GMT) rise, the land area that is affected by GWR decreases of more than 30% and 70% increases linearly with global warming from 0 to 3 ° C. For each degree of GMT rise, an additional 4% of the global land area (except Greenland and Antarctica) is affected by a GWR decrease of more than 30%, and an additional 1% is affected by a decrease of more than 70%.
The 99th Annual Meeting of the Geologische Vereinigung (GV) and International Conference on Earth Control on Planetary Life and Environment, held in October 2009 at the Geosciences Centre of the Georg-August-Universität Göttingen, brings together researchers from all fields of Earth Sciences and beyond to shape an attractive interdisciplinary program on the geological history of Planet Earth and its control over and interaction with biological evolution, development of habitats, environmental and climate change as well as history and culture of Homo sapiens. This volume contains the abstracts of invited keynote lectures as well as all oral and poster presentations.
Environmental change impacts on the C- and N-cycle of European forests: a model comparison study
(2013)
Forests are important components of the greenhouse gas balance of Europe. There is considerable uncertainty about how predicted changes to climate and nitrogen deposition will perturb the carbon and nitrogen cycles of European forests and thereby alter forest growth, carbon sequestration and N2O emission. The present study aimed to quantify the carbon and nitrogen balance, including the exchange of greenhouse gases, of European forests over the period 2010–2030, with a particular emphasis on the spatial variability of change. The analysis was carried out for two tree species: European beech and Scots pine. For this purpose, four different dynamic models were used: BASFOR, DailyDayCent, INTEGRATOR and Landscape-DNDC. These models span a range from semi-empirical to complex mechanistic. Comparison of these models allowed assessment of the extent to which model predictions depended on differences in model inputs and structure. We found a European average carbon sink of 0.160 ± 0.020 kgC m−2 yr−1 (pine) and 0.138 ± 0.062 kgC m−2 yr−1 (beech) and N2O source of 0.285 ± 0.125 kgN ha−1 yr−1 (pine) and 0.575 ± 0.105 kgN ha−1 yr−1 (beech). The European average greenhouse gas potential of the carbon sink was 18 (pine) and 8 (beech) times that of the N2O source. Carbon sequestration was larger in the trees than in the soil. Carbon sequestration and forest growth were largest in central Europe and lowest in northern Sweden and Finland, N. Poland and S. Spain. No single driver was found to dominate change across Europe. Forests were found to be most sensitive to change in environmental drivers where the drivers were limiting growth, where changes were particularly large or where changes acted in concert. The models disagreed as to which environmental changes were most significant for the geographical variation in forest growth and as to which tree species showed the largest rate of carbon sequestration. Pine and beech forests were found to have differing sensitivities to environmental change, in particular the response to changes in nitrogen and precipitation, with beech forest more vulnerable to drought. There was considerable uncertainty about the geographical location of N2O emissions. Two of the models BASFOR and LandscapeDNDC had largest emissions in central Europe where nitrogen deposition and soil nitrogen were largest, whereas the two other models identified different regions with large N2O emission. N2O emissions were found to be larger from beech than pine forests and were found to be particularly sensitive to forest growth.
Forests are important components of the greenhouse gas balance of Europe. There is considerable uncertainty about how predicted changes to climate and nitrogen deposition will perturb the carbon and nitrogen cycles of European forests and thereby alter forest growth, carbon sequestration and N2O emission. The present study aimed to quantify the carbon and nitrogen balance, including the exchange of greenhouse gases, of European forests over the period 2010–2030, with a particular emphasis on the spatial variability of change. The analysis was carried out for two tree species: European beech and Scots pine. For this purpose, four different dynamic models were used: BASFOR, DailyDayCent, INTEGRATOR and Landscape-DNDC. These models span a range from semi-empirical to complex mechanistic. Comparison of these models allowed assessment of the extent to which model predictions depended on differences in model inputs and structure. We found a European average carbon sink of 0.160 ± 0.020 kgC m−2 yr−1 (pine) and 0.138 ± 0.062 kgC m−2 yr−1 (beech) and N2O source of 0.285 ± 0.125 kgN ha−1 yr−1 (pine) and 0.575 ± 0.105 kgN ha−1 yr−1 (beech). The European average greenhouse gas potential of the carbon source was 18 (pine) and 8 (beech) times that of the N2O source. Carbon sequestration was larger in the trees than in the soil. Carbon sequestration and forest growth were largest in central Europe and lowest in northern Sweden and Finland, N. Poland and S. Spain. No single driver was found to dominate change across Europe. Forests were found to be most sensitive to change in environmental drivers where the drivers were limiting growth, where changes were particularly large or where changes acted in concert. The models disagreed as to which environmental changes were most significant for the geographical variation in forest growth and as to which tree species showed the largest rate of carbon sequestration. Pine and beech forests were found to have differing sensitivities to environmental change, in particular the response to changes in nitrogen and precipitation, with beech forest more vulnerable to drought. There was considerable uncertainty about the geographical location of N2O emissions. Two of the models BASFOR and LandscapeDNDC had largest emissions in central Europe where nitrogen deposition and soil nitrogen were largest whereas the two other models identified different regions with large N2O emission. N2O emissions were found to be larger from beech than pine forests and were found to be particularly sensitive to forest growth.
When studying new particle formation, the uncertainty in determining the "true" nucleation rate is considerably reduced when using Condensation Particle Counters (CPCs) capable of measuring concentrations of aerosol particles at sizes close to or even at the critical cluster size (1–2 nm). Recently CPCs, able to reliably detect particles below 2 nm in size and even close to 1 nm became available. The corrections needed to calculate nucleation rates are substantially reduced compared to scaling the observed formation rate to the nucleation rate at the critical cluster size. However, this improved instrumentation requires a careful characterization of their cut-off size and the shape of the detection efficiency curve because relatively small shifts in the cut-off size can translate into larger relative errors when measuring particles close to the cut-off size.
Here we describe the development of two continuous flow CPCs using diethylene glycol (DEG) as the working fluid. The design is based on two TSI 3776 counters. Several sets of measurements to characterize their performance at different temperature settings were carried out. Furthermore two mixing-type Particle Size Magnifiers (PSM) A09 from Airmodus were characterized in parallel. One PSM was operated at the highest mixing ratio (1 L min−1 saturator flow), and the other was operated in a scanning mode, where the mixing ratios are changed periodically, resulting in a range of cut-off sizes. Different test aerosols were generated using a nano-Differential Mobility Analyzer (nano-DMA) or a high resolution DMA, to obtain detection efficiency curves for all four CPCs. One calibration setup included a high resolution mass spectrometer (APi-TOF) for the determination of the chemical composition of the generated clusters. The lowest cut-off sizes were achieved with negatively charged ammonium sulphate clusters, resulting in cut-offs of 1.4 nm for the laminar flow CPCs and 1.2 and 1.1 nm for the PSMs. A comparison of one of the laminar-flow CPCs and one of the PSMs measuring ambient and laboratory air showed good agreement between the instruments.
The SAWNUC microphysical aerosol nucleation model is used to study the effect of reactor walls on the interpretation of nucleation experiments with respect to nucleation theory. This work shows that loss processes, such as wall losses, influence the interpretation of nucleation experiments, especially at low growth rates and short lifetime of freshly nucleated particles. In these cases the power dependency of the formation rates, determined at a certain particle size, with respect to H2SO4 does not correspond to the approximate number of H2SO4 molecules in the critical cluster as expected by the first nucleation theorem. Observed ∂log(J)/∂log([H2SO4]) therefore can vary widely for identical nucleation conditions but different sink terms.
We investigate the contribution of oceanic methyl iodide (CH3I) to the stratospheric iodine budget. Based on CH3I measurements during three tropical ship campaigns and the Lagrangian transport model FLEXPART we provide a detailed analysis of CH3I transport from the ocean surface to the cold point in the upper tropical tropopause layer (TTL). While average oceanic emissions differ by less than 50% from campaign to campaign, the measurements show much stronger variations within each campaign. A positive correlation between the oceanic CH3I emissions and the efficiency of CH3I troposphere–stratosphere transport has been identified for some cruise sections. The mechanism of strong horizontal surface winds triggering large emissions on the one hand and being associated with tropical convective systems, such as developing typhoons, on the other hand, could explain the identified correlations. As a result of the simultaneous occurrence of large CH3I emissions and strong vertical uplift, localized maximum mixing ratios of 0.6 ppt CH3I at the cold point have been determined for observed peak emissions during the SHIVA-Sonne campaign in the coastal West Pacific. The other two campaigns give considerable smaller maxima of 0.1 ppt CH3I for the TransBrom campaign in the open West Pacific and 0.03 ppt for emissions from the coastal East Atlantic during the DRIVE campaign. In order to assess the representativeness of the large local mixing ratios we use climatological emission scenarios to derive global upper air estimates of CH3I abundances. The model results are compared to available upper air measurements including data from the recent ATTREX and HIPPO2 aircraft campaigns. In the East Pacific region, the location of the available measurement campaigns in the upper TTL, the comparisons give a good agreement indicating that around 0.01 to 0.02 ppt of CH3I enter the stratosphere. However, other tropical regions, which are subject to stronger convective activity show larger CH3I entrainment, e.g., 0.08 ppt in the West Pacific. The strong variations in the geographical distribution of CH3I entrainment suggest that currently available upper air measurements are not representative of global estimates and further campaigns will be necessary in order to better understand the CH3I contribution to stratospheric iodine.
In the original manuscript, Figs. 7–16 included fonts which were not correctly embedded in the file. As such, unless certain propriety software (ArcGIS) is installed on the viewing platform, the figures will appear corrupted. In this Corrigendum, Figs. 7–16 and their captions are reproduced with the fonts correctly embedded. Please find the correct figures below.
The late Miocene palaeorecord provides evidence for a warmer and wetter climate than that of today, and there is uncertainty in the palaeo-CO2 record of at least 200 ppm. We present results from fully coupled atmosphere-ocean-vegetation simulations for the late Miocene that examine the relative roles of palaeogeography (topography and ice sheet geometry) and CO2 concentration in the determination of late Miocene climate through comprehensive terrestrial model-data comparisons. Assuming that these data accurately reflect the late Miocene climate, and that the late Miocene palaeogeographic reconstruction used in the model is robust, then results indicate that:
1. Both palaeogeography and atmospheric CO2 contribute to the proxy-derived precipitation differences between the late Miocene and modern reference climates. However these contributions exibit synergy and so do not add linearly.
2. The vast majority of the proxy-derived temperature differences between the late Miocene and modern reference climates can only be accounted for if we assume a palaeo-CO2 concentration towards the higher end of the range of estimates.