550 Geowissenschaften
Refine
Year of publication
Document Type
- Article (540) (remove)
Has Fulltext
- yes (540)
Is part of the Bibliography
- no (540)
Keywords
- climate change (6)
- Climate change (5)
- Atmospheric chemistry (4)
- loess (4)
- Biogeochemistry (3)
- COSMO-CLM (3)
- Geochemistry (3)
- Klimawandel (3)
- Palaeoclimate (3)
- Bayesian network (2)
Institute
- Geowissenschaften (540) (remove)
Carbonate archives record a brief snapshot of the ambient Earth’s surface conditions at their deposition. However, the geologically reasonable extraction and interpretation of geochemical proxy data from ancient, diagenetically altered rock archives is fraught with problems. Three issues stand out: the dichotomy between petrographic and geochemical alteration; the lack of quantitative age constraints for specific diagenetic phases resulting in a poorly constrained admixture of local, basin-wide and over-regional (far-field) features; and an often insufficient understanding of the temperatures and compositions of diagenetic fluids. Here, the archive of Devonian marine limestones exposed to multiple far-field diagenetic events is used as an example to explore the above-listed issues. Methods applied include petrography, micro XRF, fluid inclusion data, clumped isotopes, δ13C and δ18O isotopes, 87Sr/86Sr ratios and quartz trace element data. Devonian limestones studied here were overprinted by two cross-cutting regional fault zones (T ≈ 230 °C) by multiple events between the Variscan Orogeny and the late Paleogene. The following processes are recorded: (i) protolith deposition and partial dolomitisation during rapid burial in the Middle/Late Devonian (T ≈ 180 °C); (ii) deep burial to ca 6.5 km and tectonic/hydrothermal overprint during the Variscan Orogeny in the Carboniferous (T ≈ 90–230 °C); (iii) rapid uplift to 1–2 km burial depth at the end of the Variscan Orogeny and hypogene karstification (T ≈ 50 to 100 °C) initiated by regional geology in the Permian/Triassic; (iv) tectonic/hydrothermal overprint during the opening of the Proto-Atlantic Ocean between the Early Jurassic and the Early Cretaceous (T ≈ 50 to 130 °C); (v) tectonic/hydrothermal overprint including renewed hypogene karstification and hydrothermal calcite cement precipitation (T ≈ 50 to 180 °C) during Alpine Orogeny between the Late Cretaceous and late Paleogene. Despite this complex series of diagenetic events, the protolith limestones largely preserved their respective Middle/Late Devonian dissolved inorganic carbon (DIC) and 87Sr/86Sr signatures. This study documents that geochemical proxy data, placed into their petrographic, paleotemperature, and local to over-regional context, significantly increases the ability to extract quantitative information from ancient carbonate rock archives. Research shown here has wider relevance for carbonate archive research in general.
Highlights
• Constrictional structures range from dome-and-basin folds to coeval folds and boudins.
• Under bulk constriction, the competent layer rotates slower than a passive plane.
• Extension-parallel and –perpendicular folds grow simultaneously.
• Extension-perpendicular folds affect previous boudins.
Abstract
We conducted scaled analogue modelling to show the influence of varying single layer initial orientation on the geometry of folds and boudins in a bulk constrictional strain field. The initial angle between the plane of shortening and the competent layer (θZ(i)) was incrementally increased from 0° to 90° by multiples of 11.25°. While the amount of layer thickening decreased with increasing θZ(i), the deformation structures produced range from pure dome-and-basin folds to coeval folds and boudins. Based on the attitude of fold axes, there are extension-parallel (FEPR) and extension-perpendicular (FEPP) folds, with axes subparallel and subperpendicular to the principal stretching axis (X), respectively. Coeval growth of FEPR folds and boudins occurred when θZ(i) > ca. 25°. The FEPP folds can be subdivided into a first type which affect the entire layer (if θZ(i) ranges between 11.25 and 78.75°) and a second type, referred to as FBEPP folds, which are affecting pre-existing boudins if θZ(i) > 45°. The interlimb angle of all types of folds increases with increasing θZ(i). Folds and boudins similar to the ones produced in this study can be found in salt domes and in tectonites of subduction zones.
Non-matrix-matched calibration of laser ablation ICPMS (trace/major) element data is a common quantification strategy. However, LA sampling is associated with downhole elemental fractionation, potentially causing inaccuracies if the magnitude of fractionation between the sample and reference material (RM) differs. Here, we estimate fractionation factors (FFs) for different elements (El) in a range of RMs relative to NIST SRM610/612 (FFEl/Ca-NIST) and evaluate element-specific corrections for downhole fractionation using these measured FFEl/Ca-NIST. Significantly different mean El/Ca values were observed before and after correction, particularly for the alkali elements (all RMs), and B, Fe, and Zn (some RMs), notably improving accuracy, especially for the alkali elements. In cases where this methodology does not result in an accuracy improvement, this may help identify underlying issues in reported/reference values for RMs, given that this phenomenon should be accounted for. Overall, we recommend considering routine assessment of FFs and applying a FF correction to enhance data quality.
Highlights
• We find DBrfluid/melt = 1.19 to 3.92 for experimental Br degassing from basalt magma into aqueous fluids.
• D <1 under almost dry conditions propose only little Br degassing for dry intra-plate volcanism relative to volcanic arcs.
• An annual global Br flux of 23.5–72.9 × 109 g/y into the atmosphere was calculated.
Abstract
We present the first in-situ partitioning data for bromine between a natural basaltic melt and a coexisting fluid. For this study hydrothermal diamond anvil cell experiments at pressures up to 1.7 GPa were conducted. We combined laser heating to melt the basalt glass with external heating to lower the temperature gradient in the cell and to initiate circulation for the aqueous fluid. Bromine concentrations were measured in-situ with X-ray fluorescence in the basaltic melts, glasses, and in the fluid. From the results we calculated partition coefficients of DBrfluid/melt = 1.19 to 3.92 in the range of 0.4 to 1 GPa for aqueous fluids. Experiments with neon as the surrounding fluid (DBrfluid/melt = 0.38 ± 0.01 at 1.1 GPa) suggest that Br-release from a basalt into volatiles that have no bonding affinity with Br is weak. This should be the case for dry intra-plate volcanic eruptions. From the experimentally gained partition coefficients and from global Br concentration values in melt inclusions of arc magmas, we calculated an annual global Br flux of 23.5–72.9 × 109 g/y.
We present a new experimental dataset on the impact of the heavy halogens chlorine, bromine and iodine on the Raman water bands concerning pressure and their concentration at room temperature. These experiments were conducted at ambient temperature, with variations in halogen concentration and pressure ranging from 0 to 1.4 GPa.
The strength of the Raman water band shift change increases with the ionic size from chlorine, over bromine, to iodine. Our experiments further demonstrate that increased pressure diminishes the impact of the halogen shift change to a varying extent for each of the three halogens. This finding can have significant implications for the salinity calculation of fluid inclusions in minerals such as quartz or olivine. Particularly in the low salinity range, the concentration can be markedly underestimated if the pressure effect is neglected. For experiments in diamond anvil cells involving halogens dissolved in water, the change in Raman water band shifts can serve either as a new tool to monitor pressure, or to monitor the salinity.
Highlights
• We present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series.
• The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios.
• The model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33.
Abstract
High-rate Global Navigation Satellite System (HR-GNSS) data can be highly useful for earthquake analysis as it provides continuous high-frequency measurements of ground motion. This data can be used to analyze diverse parameters related to the seismic source and to assess the potential of an earthquake to prompt strong motions at certain distances and even generate tsunamis. In this work, we present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series. The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios. We explored the potential of the model for global application and compared its performance using both synthetic and real data from different seismogenic regions. The performance of our model at this stage was satisfactory in estimating earthquake magnitude from synthetic data with 0.07 ≤ RMS ≤ 0.11. Comparable results were observed in tests using synthetic data from a different region than the training data, with RMS ≤ 0.15. Furthermore, the model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33, provided that the data from a particular group of stations had similar epicentral distance constraints to those used during the model training. The robustness of the DL model can be improved to work independently from the window size of the time series and the number of stations, enabling faster estimation by the model using only near-field data. Overall, this study provides insights for the development of future DL approaches for earthquake magnitude estimation with HR-GNSS data, emphasizing the importance of proper handling and careful data selection for further model improvements.
PolarCAP – A deep learning approach for first motion polarity classification of earthquake waveforms
(2022)
Highlights
• We present PolarCAP, a deep learning model that can classify the polarity of a waveform with a 98% accuracy.
• The first-motion polarity of seismograms is a useful parameter, but its manual determination can be laborious and imprecise.
• We demonstrate that in several cases the model can assign trace polar-ity more accurately than a human analyst.
Abstract
The polarity of first P-wave arrivals plays a significant role in the effective determination of focal mechanisms specially for smaller earthquakes. Manual estimation of polarities is not only time-consuming but also prone to human errors. This warrants a need for an automated algorithm for first motion polarity determination. We present a deep learning model - PolarCAP that uses an autoencoder architecture to identify first-motion polarities of earth-quake waveforms. PolarCAP is trained in a supervised fashion using more than 130,000 labelled traces from the Italian seismic dataset (INSTANCE) and is cross-validated on 22,000 traces to choose the most optimal set of hyperparameters. We obtain an accuracy of 0.98 on a completely unseen test dataset of almost 33,000 traces. Furthermore, we check the model generalizability by testing it on the datasets provided by previous works and show that our model achieves a higher recall on both positive and negative polarities.
Highlights
• Germany plans more long-distances water transfers to secure drinking water supply.
• Long-distance water transfers can unfold lock-ins that limit adaptive water governance.
• Our interdisciplinary case study shows how lock-ins emerge over different spaces and times.
• Commercialisation of water but also local protests contributed to various lock-ins.
• We therefore call for context-specific assessments of potentials and risks of LDWT.
Abstract
Germany plans to expand water transfers over long distances in the light of numerous and pressing challenges for drinking water supply. Research on inter- and intrabasin water transfers warns, however, that major investments in large-scale infrastructure systems accompanied by institutional logics and political interests often lead to a so-called lock-in. As a consequence, long-distance water transfers can limit the potential for adaptive water governance in the involved supply areas over decades with negative impacts for people and the environment. By using a case study in Germany as an example, we researched when, where and how such lock-ins around long-distance water transfers emerge. In the infrastructural development of the Elbaue-Ostharz transfer system we found various lock-ins that overlap in space and time. Some are located at the centre others at the margins of the infrastructure and commercialization of the water sector as well as hydraulic and hygienic concerns interlock with local protests in a way that the expansion of the long-distance water transfer infrastructure is presented continuously as imperative. Our findings contribute to a relational understanding of lock-ins of long-distance water transfers as contingent and diverse processes. Given the widespread occurrence of lock-ins, we argue for a context-specific assessment of potentials and risks of long-distance water transfers in times of multiple crises.
Highlights
• New fumarole and thermal water data for Askja and Kverkfjöll volcanoes, Iceland.
• Data compared to modelled compositions and fluxes of magmatic gas.
• Fumarole compositions compatible with origin of CO2 and S from degassing intrusions.
• Intrusive magmatic fluxes sufficient to sustain hydrothermal fluxes of CO2 and S in Iceland
• Magma degassing insignificant/minor source of H2O and Cl to Icelandic hydrothermal fluids
Abstract
Mantle volatiles are transported to Earth's crust and surface by basaltic volcanism. During subaerial eruptions, vast amounts of carbon, sulfur and halogens can be released to the atmosphere during a short time-interval, with impacts ranging in scale from the local environment to the global climate. By contrast, passive volatile release at the surface originating from magmatic intrusions is characterized by much lower flux, yet may outsize eruptive volatile quantities over long timescales. Volcanic hydrothermal systems (VHSs) act as conduits for such volatile release from degassing intrusions and can be used to gauge the contribution of intrusive magmatism to global volatile cycles. Here, we present new compositional and isotopic (δD and δ18O-H2O, 3He/4He, δ13C-CO2, Δ33S-δ34S-H2S and SO4) data for thermal waters and fumarole gases from the Askja and Kverkfjöll volcanoes in central Iceland. We use the data together with magma degassing modelling and mass balance calculations to constrain the sources of volatiles in VHSs and to assess the role of intrusive magmatism to the volcanic volatile emission budgets in Iceland.
The CO2/ΣS (10−30), 3He/4He (8.3–10.5 RA; 3He/4He relative to air), δ13C-CO2 (−4.1 to −0.2 ‰) and Δ33S-δ34S-H2S (−0.031 to 0.003 ‰ and −1.5 to +3.6‰) values in high-gas flux fumaroles (CO2 > 10 mmol/mol) are consistent with an intrusive magmatic origin for CO2 and S at Askja and Kverkfjöll. We demonstrate that deep (0.5–5 kbar, equivalent to ∼2–18 km crustal depth) decompression degassing of basaltic intrusions in Iceland results in CO2 and S fluxes of 330–5060 and 6–210 kt/yr, respectively, which is sufficient to account for the estimated CO2 flux of Icelandic VHSs (3365–6730 kt/yr), but not the VHS S flux (220–440 kt/yr). Secondary, crystallization-driven degassing from maturing intrusions and leaching of crustal rocks are suggested as additional sources of S. Only a minor proportion of the mantle flux of Cl is channeled via VHSs whereas the H2O flux remains poorly constrained, because magmatic signals in Icelandic VHSs are masked by a dominant shallow groundwater component of meteoric water origin. These results suggest that the bulk of the mantle CO2 and S flux to the atmosphere in Iceland is supplied by intrusive, not eruptive magmatism, and is largely vented via hydrothermal fields.
Highlights
• Subcrustal earthquakes detected beneath Fogo volcano, Cape Verde.
• At the focal depth of 40 km temperatures are likely too high for brittle failure.
• The earthquakes may originate from magma injection into a deep subcrustal reservoir.
• This observation indicates a distinct magma supply system of Fogo volcano.
Abstract
Fogo volcano belongs to the Cape Verde hotspot and its most recent eruption occurred from November 2014 to February 2015. From January to December 2016 we operated a temporary seismic network and array on Fogo and were able to locate 289 earthquakes in total. Array analysis shows that most of the events occur within the crust at distances >25 km near the neighboring island of Brava. However, on 15th August 2016 the network recorded an isolated cluster of >20 earthquakes, 13 of which could be located beneath the southern part of Fogo. The differences between S- and P-wave arrival times at steep incidence clearly indicate focal depths between approximately 38 and 44 km whereas receiver-function analyses place the Moho discontinuity at depths between 11 and 14 km. Thus, the earthquakes are located well within the upper mantle directly beneath Fogo. In view of the elevated upper-mantle temperatures within a hotspot regime, we propose that fracturing induced by magmatic injection is the most likely cause for the observed deep earthquakes.
Highlights
• Full automatized analysis of teleseismic XKS shear wave splitting.
• Rapid analysis of large seismological data sets.
• Automated window selection and quality classification.
• Application to the USArray Transportable Array including expansion to Alaska.
• Improved statistical evidence and objectivity of derived effective splitting.
Abstract
Recent technological advances have led to community wide use of large-scale seismic experiments which produce seismic data on previously impossible scales. Standard processing procedures thus require automatization to facilitate a fast and objective analysis of the data. Among these, XKS-splitting is an important tool to derive first insights into the Earth's deformation regimes at depth by studying seismic anisotropy. Most often, shear-wave splitting is interpreted to represent crystallographic preferred orientation (CPO) of mantle minerals like olivine as dominating feature and can thus be used as a proxy of mantle flow processes. Here, we introduce an addition to the MATLAB®-based SplitRacer tool box (Reiss and Rümpker 2017) which automatizes the entire XKS-splitting procedure. This is achieved by the automatization of 1) choosing a time window based on spectral analyses and 2) categorization of results based on three different XKS-splitting methods (energy minimization, rotation correlation and splitting intensity). This provides effective and objective results for splitting as well as null-measurement results. This extension allows to use SplitRacer without a graphical interface and introduces a bootstrapping statistics as error estimate of the single layer joint splitting method. The procedures are designed to allow a fast and more objective analysis of a vast amount of data, as produced by recent seismic deployments (e.g. USArray, AlpArray). We test this automatization by applying the analysis to the USArray data set, which has approximately 1900 stations with between two to fifteen years of data. We can reproduce the general pattern of the results from former studies with the more objective automatic analysis. Based on a joint-splitting approach, we approximate the splitting effect at individual stations by a single anisotropic layer. As we include null-measurements as well as a larger data set as previous studies, we can provide improved statistical evidence for these effective splitting parameters.
Highlights
• We show the first observations of seismo-acoustic tremor at Oldoinyo Lengai, the world's only active carbonatite volcano.
• We observe significant changes in seismic and acoustic tremor properties and their correlation in one year of data collection.
• Using satellite-based thermal data, we identify different volcanic processes (degassing, lava pond dynamics and spattering).
Abstract
We analyze volcanic tremor from Oldoinyo Lengai, Tanzania, which is currently the only active volcano on Earth producing carbonatitic lavas. Here, we use data from the recent SEISVOL deployment and focus on a co-located seismic and infrasound station about 200 m below the summit. We show the very first observations of seismo-acoustic tremor caused by carbonatitic eruptions. This seismo-acoustic tremor is highly variable throughout the ∼one year of data which we characterize by analyzing its seismic amplitude, duration, recurrence, dominant seismic frequency and harmonics. Frequency gliding occurs frequently and over short (minutes to hours) to long time scales (hours to days) and likely reflects different time-dependent mechanisms, such as evenly-spaced repeating events with a change in inter-event times, crater dynamics that alter resonators, and dike intrusions. Seismic and acoustic wavefields correlate well for stronger eruptive sequences but are only partially coherent which suggests that high-frequency seismic tremor (up to 25 Hz) may be caused by the low viscosity of the carbonatitic melt and not by ground-coupled airwaves. In addition, the comparison between seismic-acoustic and satellite InfraRed thermal data allows us to infer different volcanic activity styles which partially alternate throughout the year: intrusive activity and the construction of hornitos, degassing, activity from a lava pond, and varying styles of extrusive activity, in particular spattering. Our study provides important insights into the eruption dynamics of this peculiar volcano which suggests shallow melt storage within the crater floor.
Although global- and catchment-scale hydrological models are often shown to accurately simulate long-term runoff time-series, far less is known about their suitability for capturing hydrological extremes, such as droughts. Here we evaluated simulations of hydrological droughts from nine catchment scale hydrological models (CHMs) and eight global scale hydrological models (GHMs) for eight large catchments: Upper Amazon, Lena, Upper Mississippi, Upper Niger, Rhine, Tagus, Upper Yangtze and Upper Yellow. The simulations were conducted within the framework of phase 2a of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP2a). We evaluated the ability of the CHMs, GHMs and their respective ensemble means (Ens-CHM and Ens-GHM) to simulate observed hydrological droughts of at least one month duration, over 31 years (1971–2001). Hydrological drought events were identified from runoff-deficits and the Standardised Runoff Index (SRI). In all catchments, the CHMs performed relatively better than the GHMs, for simulating monthly runoff-deficits. The number of drought events identified under different drought categories (i.e. SRI values of -1 to -1.49, -1.5 to -1.99, and ≤-2) varied significantly between models. All the models, as well as the two ensemble means, have limited abilities to accurately simulate drought events in all eight catchments, in terms of their occurrence and magnitude. Overall, there are opportunities to improve both CHMs and GHMs for better characterisation of hydrological droughts.
Knowledge about the initial tectonic and depositional dynamics, as well as the influence of early rifting on climate and environmental evolution remains speculative to a large extent, because sediments are usually deeply buried. Within the East African Rift System, inversion tectonics uplifted a few of these successions to the surface hence presenting rare windows into the pre-rift depositional history. One such example, an exceptional 700 m long and up to 60 m high fresh road cut provided the opportunity to study in detail initial rift successions of the southern Albertine Rift (Western Uganda). This focusses on the basal and poorly known Middle to Late Miocene in order to unravel the climatic, environmental, hydrological and tectonic evolution of the initial Albertine Rift. A large and robust multi-proxy dataset was gathered comprising 169 m of stratigraphic thickness, which spans from 14.5 to 4.9 Ma according to a revised lithostratigraphic model. Fieldwork comprised logging of the sedimentary record, spectral gamma ray, magnetic susceptibility and 2D wall mapping with photomosaics. Additionally, the sections were sampled for bulk mineral and clay mineral analysis. The succession exposes a suite of lithofacies and architectural elements detailing the evolution of a fluvio-lacustrine system. Five depositional environments were identified which show an overall back-stepping trend from an alluvial plain to a delta plain and finally palustrine/shallow lacustrine conditions. Mesoscale base-level cycles, preservation potential of architectural elements, and stacking pattern exhibit limited accommodation space. However, it increases over time. This overall trend indicates increasing tectonic subsidence, which can be explained by flexural downwarp within the pre-rift phase and in the upper part grading into fault-controlled crustal extension of the syn-rift phase, which more and more disrupted a large-scale river system. From the Middle Miocene up to the early Pliocene, this study revealed that palaeoclimate trends become marked by increasing and more fluctuating Th concentrations, loss of feldspar, intercalated lenses of hydroxosulphate minerals, and a shift from smectite-dominated to kaolinite-dominated clays. These signals are all interpreted as detrital except for the hydroxosulphates, and they mirror the increasing intensity of chemical weathering and stripping of soils in the catchment. A trend towards increasing humidity is supported by an increase in lacustrine sediment facies and a lake-level rise. Nevertheless, intercalation of hydroxosulphate, ferricretes and pedogenised horizons prove ongoing seasonality and dry intervals. Finally, based on a revised stratigraphic model a sequence stratigraphic correlation of the outcrop's depositional cycles with basin-scale cycles is presented. According to these cycles, transition from the pre-rift to the syn-rift stage is marked by an unconformity and a tectonic pulse in the latest Miocene. However, the response of fluvial supply, the depositional system as well as climate conditions are less punctuated and characterised by gradual trends and temporal delays. The long pre-rift phase (ca 10 Myr) and the gradual transition to the syn-rift phase is in accordance with the active rifting model, which is based on thermal thinning of the lithosphere by asthenospheric upwelling.
Herein, the high-pressure/high-temperature synthesis (11 GPa, 650 °C) of Tb3B10O17(OH)5 in a modified Walker-type multianvil device is presented. The structure of this rare-earth borate was determined by single-crystal X-ray diffraction methods and was found to crystallize orthorhombically in the space group Pmn21 (no. 31) with the unit cell parameters a = 16.2527(4), b = 4.4373(1), and c = 8.8174(2) Å. The new compound was further characterized using infrared spectroscopy, energy-dispersive X-ray spectroscopy, second harmonic generation (SHG) measurements, and temperature-dependent X-ray powder diffraction. Tb3B10O17(OH)5 decomposes to β-Tb(BO2)3 at temperatures higher than 460 °C. With increasing temperatures, the formation of μ-TbBO3 was observed, which transforms to π-TbBO3 upon cooling.
High-pressure/high-temperature synthesis of the new boron-rich terbium hydroxyborate Tb3B12O19(OH)7
(2023)
Monoclinic Tb3B12O19(OH)7 was obtained by multianvil high-pressure/high-temperature syntheses at 6 GPa and 650 °C. The crystal structure was investigated by single-crystal X-ray diffraction methods and space group C2 (no. 5) with the unit cell parameters a = 24.2299(5) Å, b = 4.4667(1) Å, c = 7.0964(2) Å, β = 94.58(1)°, and two formula units per cell were revealed. Powder X-ray diffraction, infrared spectroscopy and the investigation of its second harmonic generation properties support the proposed structural model.
Local climate change risk assessments (LCCRAs) are best supported by a quantitative integration of physical hazards, exposures and vulnerabilities that includes the characterization of uncertainties. We propose to use Bayesian Networks (BNs) for this task and show how to integrate freely-available output of multiple global hydrological models (GHMs) into BNs, in order to probabilistically assess risks for water supply. Projected relative changes in hydrological variables computed by three GHMs driven by the output of four global climate models were processed using MATLAB, taking into account local information on water availability and use. A roadmap to set up BNs and apply probability distributions of risk levels under historic and future climate and water use was co-developed with experts from the Maghreb (Tunisia, Algeria, Morocco) who positively evaluated the BN application for LCCRAs. We conclude that the presented approach is suitable for application in the many LCCRAs necessary for successful adaptation to climate change world-wide.
At high pressures, autoionization – along with polymerization and metallization – is one of the responses of simple molecular systems to a rise in electron density. Nitrosonium nitrate (NO+NO3−), known for this property, has attracted a large interest in recent decades and was reported to be synthesized at high pressure and high temperature from a variety of nitrogen–oxygen precursors, such as N2O4, N2O and N2–O2 mixtures. However, its structure has not been determined unambiguously. Here, we present the first structure solution and refinement for nitrosonium nitrate on the basis of single-crystal X-ray diffraction at 7.0 and 37.0 GPa. The structure model (P21/m space group) contains the triple-bonded NO+ cation and the NO3− sp2-trigonal planar anion. Remarkably, crystal-chemical considerations and accompanying density-functional-theory calculations show that the oxygen atom of the NO+ unit is positively charged – a rare occurrence when in the presence of a less-electronegative element.
Diamonds growing in the Earth’s mantle often trap inclusions of fluids that are highly saline in composition. These fluids are thought to emerge from deep in subduction zones and may also be involved in the generation of some of the kimberlite magmas. However, the source of these fluids and the mechanism of their transport into the mantle lithosphere are unresolved. Here, we present experimental results showing that alkali chlorides are stable solid phases in the mantle lithosphere below 110 km. These alkali chlorides are formed by the reaction of subducted marine sediments with peridotite and show identical K/Na ratios to fluid inclusions in diamond. At temperatures >1100°C and low pressures, the chlorides are unstable; here, potassium is accommodated in mica and melt. The reaction of subducted sediments with peridotite explains the occurrence of Mg carbonates and the highly saline fluids found in diamonds and in chlorine-enriched kimberlite magmas.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.